Sony Speaker System SRSBTX300BLK User Manual

4-449-951-22(1)  
Using Hands-free calling with another  
Bluetooth mobile phone while  
listening to music  
This system is compatible with Multipoint technology, which  
allows you to enjoy hands-free calling while listening to music  
from a Bluetooth-compatible music player.  
3 Touch the system with the smartphone.  
Pattern A  
Pairing and connecting with a  
Bluetooth device  
Keep touching the smartphone on the N marked part of  
the system until the smartphone vibrates.  
Disposing of the System  
Troubleshooting  
For environment protection, remove the built-in lithium-ion  
battery pack from the system.  
Smartphone vibrates  
(system recognized)  
VOLUME −/+  
buttons  
Before removing the battery, drain the battery by removing  
the AC adaptor and using the system only with the battery.  
SOUND button/  
indicator  
1 Turn on the system.  
The Bluetooth indicator (blue) flashes.  
If the AUDIO IN indicator (amber) lights up, press the  
BLUETOOTH-PAIRING button.  
Take out the lithium-ion battery for recycling.  
Do not open the cabinet other than when disposing of  
the system.  
No sound / Sound from only one speaker /  
Low sound level  
2 Set the Bluetooth function of the Bluetooth  
LOCK RELEASE  
switch  
(call) button  
AUDIO IN button/  
indicator  
Personal Audio System  
1 Turn off the system and remove the AC  
device to on.  
adaptor.  
For details, refer to the operating instructions supplied  
with the device.  
Operating Instructions  
Mode d’emploi  
BATTERY/CHARGE  
indicator  
2 Detach the cover of the rear of the system to  
3 Press and hold the BLUETOOTH-PAIRING  
button on the system until two beeps are  
heard.  
Check that both this system and  
the connected device are turned  
on.  
Check that the side stand is  
opened.  
The system automatically turns off  
when the side stand is closed.  
remove the battery pack.  
N-mark  
BLUETOOTH -PAIRING  
button  
Remove the two rubber covers at the center of the  
rear of the system.  
Side stand  
Bluetooth indicator  
Remove the two screws.  
Remove the cover.  
Remove the connector plug from the system.  
Remove the battery.  
The Bluetooth indicator (blue) begins to flash quickly and  
pairing mode is entered.  
Tip  
Lights up  
When the system is turned on first time, the Bluetooth  
Turn up the volume of the system  
and the connected device.  
If you are connecting a personal  
computer to the system, make sure  
the audio output setting of the  
computer is set for a Bluetooth  
device.  
indicator (blue) starts flashing quickly.  
/button  
Follow the on-screen instructions to establish the  
connection.  
When the Bluetooth connection is established, the  
Bluetooth indicator (blue) stays on.  
©2013 Sony Corporation Printed in China  
One touch connection (NFC) cannot be used in this  
procedure.  
Operations may vary depending on the Bluetooth device.  
This type of Bluetooth connection may not be established  
depending on the combination of the Bluetooth devices.  
Refer also to the operating instructions supplied with your  
Bluetooth devices.  
Illumination lamp  
Microphone  
SRS-BTX300  
Check that the connected device is  
being played back.  
Pair this system and the Bluetooth  
device again.  
Tips  
If it is difficult to establish the connection, try the following.  
Activate the app “NFC Easy Connectand move the  
smartphone slightly on the N marked part of the system.  
If the smartphone is in a case, remove it.  
— Connect the equipment into an outlet on a circuit different  
from that to which the receiver is connected.  
English  
Personal Audio System  
1 Make the Bluetooth connections between the  
system and a Bluetooth music player via  
A2DP, and between the system and a  
— Consult the dealer or an experienced radio/TV technician  
for help.  
Touch the system with the smartphone again to disconnect.  
If you have multiple NFC compatible devices, just touch the  
smartphone to a different device to switch the connection  
to that device. For example, when your smartphone is  
connected with NFC compatible headphones, just touch the  
smartphone to the system to change the Bluetooth  
Before operating the system, please read this guide  
thoroughly and retain it for future reference.  
Note  
Be careful not to damage the code cover with metallic tweezers,  
etc. when you remove the battery pack from the system.  
Bluetooth mobile phone via HFP or HSP.  
Check that both plugs of the  
connecting cord (not supplied) are  
firmly inserted into the system and  
the connected device.  
If the connected device is monaural,  
sound will only be output from the  
left speaker.  
Owners Record  
Flashes quickly  
For the customers in the USA and Canada  
RECYCLING LITHIUM-ION BATTERIES  
Lithium-Ion batteries are recyclable.  
For details on the Bluetooth connection procedure, see  
“How to Make Wireless Connection with Bluetooth  
Devices.When the Bluetooth connection is established,  
the Bluetooth indicator (blue) on the system stays on.  
The serial number is located on the inside of the side stand.  
Record the serial number in the space provided below. Refer  
to them whenever you call upon your Sony dealer regarding  
this product.  
connection to the system (One touch connection switching).  
Specifications  
Tips  
You can help preserve our environment  
by returning your used rechargeable  
batteries to the collection and recycling  
location nearest you.  
4 Perform the pairing procedure on the  
AUDIO POWER SPECIFICATIONS  
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:  
With 6 ohm loads both channels driven,  
from 150 Hz - 10,000 Hz; rated 10 watts per  
channel minimum RMS power, with no  
more than 10% total harmonic distortion  
in AC operation.  
Model No. SRS-BTX300  
To use only the calling function of a Bluetooth mobile phone  
Listening to Music  
Bluetooth device to detect the system.  
that also has a music function, establish Bluetooth  
connection between the system and the mobile phone via  
HFP or HSP, not via A2DP.  
Serial No.________________________________  
You can enjoy music wirelessly, via the Bluetooth function built  
5 Select “SRS-BTX300shown in the display of  
in your devices.  
RESET  
button  
For more information regarding  
recycling of rechargeable batteries, call toll free  
Depending on the Bluetooth mobile phone, while the  
Bluetooth connection is established via HFP or HSP, the  
other Bluetooth connection via A2DP may also be occupied  
by the same Bluetooth mobile phone. A Bluetooth music  
player cannot be connected with this system in this case.  
the Bluetooth device.  
For customers in the USA  
AUDIO IN jack  
If “SRS- BTX300does not appear on the device’s display,  
repeat from step 2.  
Please register this product on line at  
Proper registration will enable us to send you  
periodic updates about new products, services  
and other important announcements. Registering  
your product will also allow us to contact you  
in the unlikely event that the product needs  
adjustment or modification. Thank you.  
Speaker section  
Caution: Do not handle damaged or leaking Lithium-Ion  
Note  
Speaker system  
Main speaker :  
Distorted sound /  
Humming or noise in the system output  
batteries.  
Some devices cannot display a list of detected devices.  
70 mm (2 4/5 in) × 2 (FULL RANGE)  
Passive speaker:  
Note  
To make the same connection with the same devices after  
turning the system off, follow this procedure again.  
6 If Passcode* input is required on the display  
BLUETOOTH  
STANDBY switch  
103 mm × 60 mm (4 1/10 in × 2 2/5 in) (w/h)  
DC OUT ONLY  
connector (USB)  
DC IN12.5V  
jack  
Precautions  
of the Bluetooth device, input “0000.”  
Enclosure type  
Passive radiator model  
The Bluetooth connection is established and the Bluetooth  
indicator (blue) on the system stays on.  
* Passcode may be called “Passkey,“PIN code,“PIN  
number,or “Password.”  
Turn down the volume of the  
connected device.  
Keep the system away from a TV.  
Notes when using with a mobile phone  
Amplifier section  
For details on operation of your mobile phone when  
receiving a telephone call while transmitting the sound  
using the Bluetooth connection, refer to the operating  
instructions supplied with the mobile phone.  
To Enjoy the Sound Effect  
WARNING  
Reference output power  
10 W + 10 W (AC adaptor, at 1 % harmonic  
To reduce the risk of fire or electric shock, do not  
expose this apparatus to rain or moisture.  
distortion, 1 kHz, 6 Ω), 4 W + 4 W (Battery,  
at 10 % harmonic distortion, 1 kHz, 6 Ω)  
Operations may vary depending on the Bluetooth device.  
Refer also to the operating instructions supplied with your  
Bluetooth device.  
Setting  
Tip  
Function of Parts  
Turning the System on  
and off/Charging the  
system  
To pair with other Bluetooth devices, repeat steps 2 to 6 for each  
You can enjoy sound effects as desired.  
On safety  
device.  
BATTERY/CHARGE indicator  
To reduce the risk of fire, do not cover the ventilation of the  
apparatus with newspapers, tablecloths, curtains, etc. And do  
not place lighted candles on the apparatus.  
Bluetooth  
Lights up, flashes or turns off depending on the status of  
the system.  
For details, see the following section, “Indications of BATTERY/  
CHARGE indicator.”  
1 Press the SOUND button to select the sound  
1 Make the Bluetooth connection between the  
Notes on the AC adaptor  
Communication System  
Bluetooth Specification version 3.0  
Bluetooth Specification Power Class 2  
Maximum communication range  
Line of sight approx. 10 m (30 ft)*1  
Notes  
If the connected device has an  
equalizer function, set it to off.  
Switch the Bluetooth connection to  
A2DP by operating the Bluetooth  
device when HFP or HSP is set.  
effect.  
When connecting or disconnecting the AC adaptor, turn off  
Pairing mode of the system is cancelled after about 5 minutes,  
system and the device.  
The SOUND indicator (see below) shows the current sound  
effect setting.  
and the Bluetooth indicator (blue) flashes. If the pairing mode is  
cancelled while performing this procedure, start over from  
step 3.  
Passcode of the system is fixed as “0000.The system cannot be  
paired with a Bluetooth device whose Passcode is not “0000.”  
Once Bluetooth devices are paired, there is no need to pair those  
devices again. However, in the following case, you will need to  
perform the pairing procedure again.  
the system beforehand. Otherwise, it may cause  
malfunction.  
Use only the supplied AC adaptor. To avoid damaging the  
system, do not use any other AC adaptor.  
To reduce the risk of fire or electric shock, do not expose this  
apparatus to dripping or splashing, and do not place objects  
filled with liquids, such as vases, on the apparatus.  
Output  
For details on the Bluetooth connection procedure, see  
“How to Make Wireless Connection with Bluetooth  
Devices.When the Bluetooth connection is established,  
the Bluetooth indicator (blue) on the system stays on.  
This system can operate by AC adaptor or built-in lithium-ion  
battery (rechargeable). Charge the battery before using the  
system for the first time.  
N-mark  
You can switch between effects by repeatedly pressing the  
SOUND button.  
Touch to make Bluetooth connection with an NFC  
compatible smartphone.  
Frequency band 2.4 GHz band (2.4000 GHz - 2.4835 GHz)  
Modulation method  
FHSS  
Compatible Bluetooth Profiles*2  
A2DP (Advanced Audio Distribution  
Profile)  
Do not install the appliance in a confined space, such as a  
bookcase or built-in cabinet.  
1 Connect the supplied AC adaptor.  
(call) button  
Press to call or operate during a call.  
2 Start playback on the Bluetooth device, then  
The BATTERY/CHARGE indicator (amber) lights up when  
the battery is being charged, and turns off when charging  
is complete. It takes approximately 4 hours to charge the  
battery.  
Status Sound effect  
Keep the system away from a  
microwave oven, wireless LAN, etc.  
If you connect a device with a built-  
in radio or tuner to this system,  
broadcasts may not be received, or  
sensitivity may be reduced. Locate  
the system farther away from the  
device and check that you can listen  
to the broadcasts satisfactorily.  
adjust the volume.  
Do not expose the batteries (battery pack or batteries  
installed) to excessive heat such as sunshine, fire or the like for  
a long time.  
Amber High-quality bass sound will be heard (MEGA  
BASS). This setting is enabled by default when  
you first turn on the system.  
VOLUME −/+ buttons  
Adjusts the volume.  
The system is paired with 9 or more devices.  
Set the volume of the Bluetooth device to a moderate  
Polarity of the plug  
The system can be paired with up to 8 Bluetooth devices. If a  
new device is paired after 8 devices have been paired, the  
device whose latest connection time is the oldest among the  
8 paired devices is replaced by the new one.  
More than one device can be paired with the system, but sound  
will be heard from just one of those devices.  
level, and press the VOLUME –/+ buttons on the system.  
Plug the AC adaptor into a nearby wall outlet (mains). In the  
case of a problem, unplug it from the wall outlet (mains)  
immediately.  
Do not install the AC adaptor in a confined space, such as a  
bookcase or built-in cabinet.  
To reduce the risk of fire or electric shock, do not expose the  
AC adaptor to dripping or splashing, and do not place  
objects filled with liquids, such as vases, on the AC adaptor.  
LOCK RELEASE switch  
AVRCP (Audio Video Remote Control  
Profile)  
HSP (Headset Profile)  
Auto power off  
As the main plug of AC adaptor is used to disconnect the AC  
adaptor from the mains, connect it to an easily accessible AC  
outlet. Should you notice an abnormality in it, disconnect it  
from the AC outlet immediately.  
Use for opening and closing the side stand.  
The system automatically turns off after about 20 minutes  
when the hands-free is not being used (the system is not  
connected with a Bluetooth device via HFP/HSP), and when no  
device is being charged via the DC OUT ONLY connector, and  
when no music is being played.  
Green Surround sound will be heard (MEGA  
BASS+SURROUND).  
Side stand  
Open to use the system.  
HFP (Hands-free Profile)  
Supported Codec*3  
Bring this system and the  
Charge the system by connecting  
the AC adaptor if the BATTERY/  
CHARGE indicator flashes in green.  
Illumination lamp  
SBC*4, AAC*5  
Off  
The sound effect is off.  
The unit is not disconnected from the AC power source  
(mains) as long as it is connected to the wall outlet, even if the  
unit itself has been turned off.  
Bluetooth device closer together.  
Remove any obstacle between this  
system and the Bluetooth device.  
Pattern B  
Lights up in a variety of colors depending on the status of  
the system. For details, see the following section,  
“Indications of Illumination lamp.”  
Transmission range (A2DP)  
After use  
Connecting with a paired  
Bluetooth device  
20 Hz - 20,000 Hz (Sampling frequency  
44.1 kHz)  
Do any of the following.  
Tip  
On placement  
The nameplate and important information concerning safety  
are located on the bottom exterior of the main unit and on the  
surface of the AC adaptor.  
Microphone  
Use during a call.  
Set the Bluetooth function of the Bluetooth device off. For  
details, refer to the operating instructions supplied with the  
device.  
Turn off the Bluetooth device.  
Turn off the system.  
Touch the system with the smartphone again to disconnect  
(NFC compatible smartphones only).  
The system remembers the last sound effect setting next time it  
is turned on.  
1
Do not set the speaker in an inclined position.  
Do not leave the system in a location near heat sources, or  
in a place subject to direct sunlight, excessive dust,  
moisture, rain or mechanical shock.  
*
The actual range will vary depending on factors such as  
obstacles between devices, magnetic fields around a  
microwave oven, static electricity, reception sensitivity,  
aerial’s performance, operating system, software  
application, etc.  
Bluetooth standard profiles indicate the purpose of  
Bluetooth communication between devices.  
Codec: Audio signal compression and conversion format  
Subband Codec  
1 Turn on the system.  
DC IN 12.5V jack  
Connects the supplied AC adaptor.  
The Bluetooth indicator (blue) flashes.  
If the AUDIO IN indicator (amber) lights up, press the  
BLUETOOTH-PAIRING button.  
You are cautioned that any changes or modifications not  
expressly approved in this manual could void your authority  
to operate this equipment.  
AUDIO IN jack  
On operation  
Listening to Music by  
Wired Connection with a  
Portable Audio Device,  
etc.  
2
*
Connects to the headphone jack of a portable audio device,  
computer, etc., using a connecting cord (not supplied).  
Do not insert any small objects, etc., into the jacks or  
ventilation hole on the rear of the system. The system may  
short out or malfunction.  
2 Set the Bluetooth function of the Bluetooth  
This equipment must not be co-located or operated in  
conjunction with any other antenna or transmitter.  
3
4
5
*
*
*
BLUETOOTH STANDBY switch  
Turns on and off the Bluetooth standby mode.  
device to on.  
Advanced Audio Coding  
This equipment complies with FCC/IC radiation exposure  
limits set forth for an uncontrolled environment and meets  
the FCC radio frequency (RF) Exposure Guidelines in  
Supplement C to OET65 and RSS-102 of the IC radio frequency  
(RF) Exposure rules.  
This equipment has very low levels of RF energy that it  
deemed to comply without maximum permissive exposure  
evaluation (MPE). But it is desirable that it should be installed  
and operated keeping the radiator at least 20 cm or more  
away from person’s body (excluding extremities: hands, wrists,  
feet and ankles).  
On cleaning  
Using Hands-free Calling  
While Listening to Music  
Tip  
RESET button  
Resets the system.  
Do not use alcohol, benzine, or thinner to clean the cabinet.  
In the case of the last-connected Bluetooth device, the  
Microphone  
system tries to re-establish Bluetooth connection with it if  
the device’s Bluetooth function is on. When Bluetooth  
connection is established, the Bluetooth indicator (blue) on  
the system stays on.  
Type:  
Directional characteristic:  
Omni directional  
Effective frequency range:  
50 Hz -10 kHz  
Electret condenser  
Pairing is not possible  
2 Press the /button.  
DC OUT ONLY connector (USB)  
Charges devices, such as your smartphone, etc. by  
connecting to the DC OUT ONLY connector (USB connector).  
Others  
If you have any questions or problems concerning this  
You can enjoy hands-free calling via Bluetooth connection  
with a Bluetooth mobile phone that has a music function and  
supports the Bluetooth profile A2DP, and HFP or HSP.  
If your Bluetooth mobile phone supports both HFP and HSP,  
set to HFP.  
1 Connect the device to the system.  
system that are not covered in this manual, please consult  
your nearest Sony dealer.  
Bring this system and the Bluetooth  
device to within 1 m of each other.  
If the Bluetooth indicator (blue) is not  
flashing quickly, press and hold the  
BLUETOOTH-PAIRING button on the  
system until two beeps are heard.  
SOUND button  
Press to select a sound effect.  
3 Select “SRS-BTX300shown in the display of  
the Bluetooth device.  
SOUND indicator  
Lights up, according to the sound effect setting.  
General  
If necessary, select a Bluetooth profile that the system  
supports from the following: A2DP, HSP or HFP. For details  
on each profile, seeWhat is Bluetooth Wireless Technology?”  
The Bluetooth connection is established and the Bluetooth  
indicator (blue) on the system stays on.  
Input  
AUDIO IN jack (ø 3.5 mm stereo mini jack)  
USB jack Type A (for charging the battery  
of a connected device) (5 V, Max.1.5 A)  
DC 12.5 V (using the supplied AC adaptor  
connected to AC 100 V - 240 V, 50 Hz/60 Hz  
power supply) or, using built-in lithium-ion  
battery  
What is Bluetooth  
DC OUT  
AUDIO IN button  
Press to listen to sound from a device connected by a  
connecting cord (not supplied).  
Under Industry Canada regulations, this radio transmitter may  
only operate using an antenna of a type and maximum (or  
lesser) gain approved for the transmitter by Industry Canada.  
To reduce potential radio interference to other users, the  
antenna type and its gain should be so chosen that the  
equivalent isotropically radiated power (e.i.r.p.) is not more  
than that necessary for successful communication.  
Wireless Technology?  
Power  
Bluetooth wireless technology is a short-range wireless  
technology that enables wireless data communication  
between digital devices, such as a computer and digital  
camera. Bluetooth wireless technology operates within a range  
of about 10 m.  
AUDIO IN indicator (amber)  
Lights up in AUDIO IN mode.  
Notes  
(Stereo mini jack)  
This step may not be necessary for some devices.  
BLUETOOTH-PAIRING button  
Press to pair with a Bluetooth device.  
If the system cannot connect to the Bluetooth device, delete  
“SRS-BTX300from the Bluetooth device, then perform  
pairing again.  
Usage life of lithium-ion battery (using the Bluetooth  
connection)  
Connecting two devices as necessary is common, but some  
devices can be connected to multiple devices at the same  
time.  
You do not need to use a cable for connection, nor is it  
necessary for the devices to face one another, such is the case  
with infrared technology. For example, you can use such a  
device in a bag or pocket.  
Bluetooth standard is an international standard supported by  
thousands of companies all over the world, and employed by  
various companies worldwide.  
approx. 8 hours*6  
Bluetooth indicator (blue)  
Lights up, flashes or turns off depending on the  
communication status.  
For details, see the following section, “Indications of the  
Bluetooth function.”  
This device complies with Industry Canada license-exempt  
RSS standard(s). Operation is subject to the following two  
conditions: (1) this device may not cause interference, and (2)  
this device must accept any interference, including  
interference that may cause undesired operation of the  
device.  
Dimensions (including projecting parts and controls)  
Approx. 341.0 mm × 115.0 mm × 58.5 mm  
(13 1/2 in × 4 5/8 in × 2 3/8 in) (w/h/d)  
(Side stand closed)  
Bluetooth standby mode  
No voice / Low voice from recipient  
When the Bluetooth standby mode is set to ON, the system can  
be turned on and operated by a Bluetooth device.  
Approx. 341.0 mm × 115.0 mm ×72.0 mm  
(13 1/2 in × 4 5/8 in × 2 7/8 in) (w/h/d)  
(Side stand open)  
/button  
Turns the system on/off.  
Tip  
You can operate the system by battery instead of the AC adaptor  
by charging the system before use.  
Important Safety Instructions  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation openings.  
Install in accordance with the manufacturer’s instructions.  
8) Do not install near any heat sources such as radiators, heat  
registers, stoves, or other apparatus (including amplifiers)  
that produce heat.  
9) Do not defeat the safety purpose of the polarized or  
grounding-type plug. A polarized plug has two blades  
with one wider than the other. A grounding type plug has  
two blades and a third grounding prong. The wide blade  
or the third prong are provided for your safety. If the  
provided plug does not fit into your outlet, consult an  
electrician for replacement of the obsolete outlet.  
10) Protect the power cord from being walked on or pinched  
particularly at plugs, convenience receptacles, and the  
point where they exit from the apparatus.  
Connecting cord (not supplied)  
Check that both this system and  
the connected device are turned  
on.  
Select HFP or HSP Bluetooth  
connection by operating the  
Bluetooth device.  
Mass  
Approx.1,600 g (3 lb 8 oz)  
including battery  
Indications of BATTERY/CHARGE  
indicator (built-in lithium-ion battery)  
Notes  
2 Turn on the system.  
Communication system and  
compatible Bluetooth profiles of the  
system  
Profile is standardisation of the function for each Bluetooth  
device specification. The system supports the following  
Bluetooth version and profiles:  
Communication System:  
Bluetooth Specification version 3.0  
Compatible Bluetooth Profiles:  
A2DP (Advanced Audio Distribution Profile): Transmitting  
or receiving audio content of high-quality.  
AVRCP (Audio Video Remote Control Profile): Controlling  
the volume.  
HSP (Headset Profile): Talking on the phone/Operating the  
phone.  
When the BATTERY/CHARGE indicator flashes as below,  
Supplied accessories  
AC adaptor (1)  
Operations may vary depending on the Bluetooth mobile  
phone. Refer also to the operating instructions supplied with  
your mobile phone.  
charge the system. In these cases, you cannot charge  
devices via the DC OUT ONLY connector.  
3 Turn on the connected device.  
4 Press the AUDIO IN button on the system.  
5 Operate the connected device.  
Status  
BATTERY/CHARGE indicator  
Operating Instructions (this document) (2)  
Bluetooth® Startup Guide (1)  
Flashes (green) (Battery power is low).  
Flashes (amber), then turns off after turning on the system  
(No battery power remaining).  
System turned on  
Lights up (green) (battery  
operation only)  
Warranty card (2)  
Carrying case (1)  
Time may vary, depending on the temperature or  
conditions of use.  
1 Make the Bluetooth connection between the  
Check that output of the Bluetooth  
mobile phone is set for the system.  
Turn up the volume of the system  
and the connected device.  
Flashes (green)  
Lights up (amber)  
Off  
Battery requires charging  
Charging battery  
When you switch the power source between AC adaptor  
and battery by connecting/disconnecting the AC adaptor,  
the system stops sound output for a short while. This is not  
a malfunction.  
system and the mobile phone.  
Set the volume of the connected device to a moderate  
level, then press the VOLUME –/+ buttons on the system.  
6
*
For details on the Bluetooth connection procedure, see  
“How to Make Wireless Connection with Bluetooth  
Devices.When the Bluetooth connection is established,  
the Bluetooth indicator (blue) on the system stays on.  
Charging complete  
Notes  
Design and specifications are subject to change without  
notice.  
The maximum power output will be lower when the AC  
adaptor is disconnected.  
In an extremely cold or hot environment, note the following  
points.  
You cannot play music only by connecting to the system with  
the connecting cord. Make sure to also press the AUDIO IN  
button.  
Indications of Illumination lamp  
Status  
2 Start playback on the Bluetooth mobile  
Illumination lamp  
Lights up (white)  
Lights up (white)  
Lights up (blue)  
Hands-free calling is not available while you are listening to  
music from a device connecting to the system by the connected  
cord.  
phone, then adjust the volume.  
Notes  
When operating by the AC adaptor, charging may complete  
too quickly, or may not be possible.  
When operating on battery only, the system may stop after  
the BATTERY/CHARGE indicator flashes (green) three times.  
AUDIO IN mode  
Searching for a device  
Set the volume of the Bluetooth mobile phone to a  
moderate level, and press the VOLUME –/+ buttons on the  
system.  
The Bluetooth standby function will be turned off  
automatically when the side stand is closed.  
Auto power off  
HFP (Hands-free Profile): Talking on the phone/Operating  
the phone by hands-free.  
If the system is being powered by battery, even if the  
system is turned off, battery power will continue to be  
consumed if the BLUETOOTH STANDBY switch is set to ON.  
Connecting to Bluetooth  
device  
The system automatically turns off after about 20 minutes  
when the hands-free is not being used (the system is not  
connected with a Bluetooth device via HFP/HSP), and when  
no device is being charged via the DC OUT ONLY connector,  
and when no music is being played.  
Charge the battery at least twice a year.  
To call  
Flashes once (white)  
Pressing VOLUME−/+  
buttons  
Maximum communication range  
Use Bluetooth devices within 10 m (line of sight) of the system.  
Maximum communication range may shorten under the  
following conditions.  
There is an obstacle such as a person, metal, or wall  
between the system and Bluetooth device.  
A wireless LAN device is in use near the system.  
A microwave oven is in use near the system.  
A device that generates electromagnetic radiation is in  
use near the system.  
To reset the system  
Press the RESET button on the rear of the system with a  
pointed object if the buttons on the system do not function.  
Operate the Bluetooth mobile phone. Check that a dialing  
One touch connection (NFC) is  
not possible  
Pattern C  
tone is heard on the system and talk using the microphone. If  
When the volume hits the  
maximum or minimum  
Flashes three times (white)  
no dialing tone is heard, press the  
(call) button on the  
11) Only use attachments/accessories specified by the  
manufacturer.  
12) Use only with the cart, stand, tripod, bracket, or table  
specified by the manufacturer, or sold with the apparatus.  
When a cart is used, use caution when moving the  
cart/apparatus combination to avoid injury from tip-over.  
Connecting with a smartphone  
by One touch (NFC)  
system for about 2 seconds to change the call device to the  
system.  
Keep the smartphone close to the  
If the smartphone is in a case,  
remove it.  
Tip  
To receive a call  
When an incoming call arrives, the playback pauses and a ring  
Charging USB Devices,  
such as Smartphones, via  
a USB Connection to the  
System  
By just touching the system with an NFC compatible  
smartphone, the system is turned on automatically and then  
paired and connected with the smartphone.  
system until the smartphone  
vibrates. If you fail, move the  
smartphone slightly on the N  
marked part of the system.  
To turn the illumination on/off, hold down the  
BLUETOOTH-PAIRING button, then press and hold the /  
button.  
How to Make Wireless  
Connection with  
tone is heard from the system. Press the  
the system and talk using the microphone.  
(call) button on  
1 Download and install the app “NFC Easy  
Indications of the Bluetooth function  
Status  
Interference from other devices  
Bluetooth Devices  
Connecton the smartphone.  
Tips  
Bluetooth indicator (blue)  
Flashes quickly  
Flashes  
If no ring tone is heard from the system when incoming call  
“NFC Easy Connectis an original app by Sony for Android  
phones, and is available at Google Play Store.  
Search for “NFC Easy Connector scan the following two-  
dimensional code to download and install the free app.  
Communication fees are required to download the app.  
The app may not be downloadable in some country/  
regions.  
Because Bluetooth devices and wireless LAN (IEEE802.11b/g)  
use the same frequency, microwave interference may occur  
and resulting in communication speed deterioration, noise, or  
invalid connection if the system is used near a wireless LAN  
device. In such a case, perform the following.  
Use the system at least 10 m away from the wireless LAN  
device.  
You can enjoy music and hands-free calling with the system  
wirelessly by using your device’s Bluetooth function.  
Choose one of the following three connection methods, best  
suited for the Bluetooth device. For details on how to operate  
your device, refer to the operating instructions supplied with  
the device.  
arrives, stop playback and press the  
(call) button to talk.  
Check that the NFC function of the  
smartphone is set to on.  
NFC receiving sensitivity depends on  
the device. If you fail to connect with  
a smartphone by One touch several  
times, connect to the system by on-  
screen operation.  
Pairing with a device  
Searching for a device  
Connected to a device  
Bluetooth standby mode  
You can use the hands-free calling when playback is completed  
During a call, press the VOLUME –/+ buttons on the system to  
adjust the volume.  
You can charge your smartphone by connecting to the DC  
OUT ONLY connector (USB) of the system. When using the  
system by the built-in battery only, you can also charge a  
smartphone from the battery of the system. Turn on the  
system in order to charge a USB device.  
13) Unplug this apparatus during lightning storms or when  
unused for long periods of time.  
Lights up  
Flashes slowly  
Notes  
14) Refer all servicing to qualified service personnel. Servicing  
is required when the apparatus has been damaged in any  
way, such as power-supply cord or plug is damaged, liquid  
has been spilled or objects have fallen into the apparatus,  
the apparatus has been exposed to rain or moisture, does  
not operate normally, or has been dropped.  
The sound is output from the left speaker only during a call.  
Use your smartphone at least 50 cm from the system. Noise may  
result if the system and smartphone are too close.  
Pairing with a Bluetooth device:  
see  
Bluetooth devices need to be “pairedwith each other  
beforehand.  
If the system is used within 10 m of a wireless LAN device,  
turn off the wireless LAN device.  
Tip  
Pattern A  
Check that the “NFC Easy Connect”  
app is displayed on the  
smartphone.  
For some smartphones, One touch connection may be  
available without downloading the app “NFC Easy Connect.”  
In that case, the operation and specifications may be  
different from the description here. For details, refer to the  
operating instructions supplied with the smartphone.  
Interference to other devices  
Microwaves emitting from a Bluetooth device may affect the  
operation of electronic medical devices. Turn off the system  
and other Bluetooth devices in the following locations, as it  
may cause an accident.  
where inflammable gas is present, in a hospital, train,  
airplane, or a gas station  
near automatic doors or a fire alarm  
To end a call  
Opening the Side Stand  
Press the  
(call) button. If you were listening to music when  
Open the side stand and operate the buttons inside. The side  
stand also functions as a support while using the system.  
Slide the LOCK RELEASE switch in the direction of the arrow  
(illustration) to open the side stand.  
Connecting with a paired device:  
see  
To listen to music with a Bluetooth device that has been  
paired, see this pattern.  
the call arrived, it will be resumed when the call has finished.  
WARNING  
Pattern B  
By the two-dimensional code:  
Use a two-dimensional code reader app.  
After use  
Battery may explode if mistreated. Do not recharge,  
disassemble or dispose of in fire.  
Do any of the following.  
Set the Bluetooth function of the Bluetooth device off. For  
details, refer to the operating instructions supplied with the  
device.  
Dispose of used battery promptly, according to local  
environmental laws and guidelines in force. Keep away from  
children.  
One touch connection with a smartphone (NFC):  
see  
Using an NFC compatible smartphone, you can establish a  
Bluetooth connection by just touching the system with it.  
Pattern C  
Notes  
Turn off the Bluetooth device.  
To be able to use the Bluetooth function, the Bluetooth  
device to be connected requires the same profile as the  
system’s.  
Turn off the system.  
For the State of California, USA only  
Perchlorate Material - special handling may apply, See  
Touch the system with the smartphone again to disconnect  
(NFC compatible smartphones only).  
Note also that even if the same profile exists, devices may  
vary in function depending on their specifications.  
Due to the characteristic of Bluetooth wireless technology,  
the sound played on the system is slightly delayed from the  
sound played on the Bluetooth device during talking on the  
telephone or listening to the music.  
This system supports security capabilities that comply with  
the Bluetooth standard to provide a secure connection  
when the Bluetooth wireless technology is used, but  
security may not be enough depending on the setting. Be  
careful when communicating using Bluetooth wireless  
technology.  
Check the following before operating the system.  
Perchlorate Material : Lithium battery contains perchlorate.  
Unit button functions during a call  
Available functions may vary depending on the Bluetooth  
mobile phone, or the profiles supported by the Bluetooth  
mobile phone. Refer to the operating instructions supplied  
with the Bluetooth mobile phone.  
Both the system and the device are placed within 1 m of  
each other.  
The system is connected to the AC adaptor, or the battery is  
sufficiently charged.  
The operating instructions supplied with the device are at  
hand.  
Compatible smartphones  
Smartphones with the NFC function built-in  
(OS: Android 2.3.3 or later, excluding Android 3.x)  
On Copyrights and Licenses  
The Bluetooth® word mark and logos are owned by the  
Bluetooth SIG, Inc. and any use of such marks by Sony  
Corporation is under license.  
USB cable  
(not supplied)  
About NFC  
The N Mark is a trademark or registered trademark of NFC  
Forum, Inc. in the United States and in other countries.  
Android is a trademark of Google Inc.  
iPhone is a trademark of Apple Inc., registered in the U.S. and  
other countries.  
Other trademarks and trade names are those of their  
respective owners.  
NFC (Near Field Communication) is a technology enabling  
short-range wireless communication between various  
devices, such as mobile phones and IC tags. Thanks to the  
NFC function, data communication can be achieved easily  
just by touching the relevant symbol or designated  
location on NFC compatible devices.  
Status  
(call) button  
Note  
This function is not for data communication by USB cable.  
Standby  
Press once to start voice dial (voice dial  
compatible mobile phones only).  
Press for about 2 seconds to redial the phone  
number that is dialed last time.  
We do not take any responsibility for the leakage of  
information during Bluetooth communication.  
A device featuring the Bluetooth function is required to  
conform to the Bluetooth standard specified by Bluetooth  
SIG, and be authenticated. Even if the connected device  
conforms to the above mentioned Bluetooth standard,  
some devices may not be connected or work correctly,  
depending on the features or specifications of the device.  
Noise or sound skips may occur depending on the Bluetooth  
device connected with the system, the communication  
environment or the usage environment.  
To close the side stand  
Outgoing  
call  
Press once to cancel outgoing call.  
Press for about 2 seconds to change call  
device between the system and mobile  
phone.  
2 Start the app “NFC Easy Connecton the  
smartphone.  
Close the side stand when you carry the system.  
Slide the LOCK RELEASE switch in the direction shown by the  
arrow above, then close the side stand by hand.  
The system automatically turns off when the side stand is  
closed.  
NOTE  
This equipment has been tested and found to comply with the  
limits for a Class B digital device, pursuant to Part 15 of the  
FCC Rules. These limits are designed to provide reasonable  
protection against harmful interference in a residential  
installation. This equipment generates, uses and can radiate  
radio frequency energy and, if not installed and used in  
accordance with the instructions, may cause harmful  
interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular  
installation. If this equipment does cause harmful interference  
to radio or television reception, which can be determined by  
turning the equipment off and on, the user is encouraged to  
try to correct the interference by one or more of the following  
measures:  
Make sure that the application screen is displayed.  
Incoming  
call  
Press once to answer call.  
Press for about 2 seconds to reject call.  
During  
call  
Press once to finish call.  
Press for about 2 seconds to change call  
device between the system and mobile  
phone.  
— Reorient or relocate the receiving antenna.  
— Increase the separation between the equipment and  
receiver.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sharp Calculator EL R287 User Manual
Sony Microscope Magnifier snt v User Manual
Sony MiniDisc Player MDS JD320 User Manual
Sony Projector PSS 2000 User Manual
SOYO Network Router AVRO3001 User Manual
Speco Technologies Security Camera CVC 185DC User Manual
SpectraLink Cell Phone Z250 User Manual
Stamina Products Fitness Equipment 65 1770 User Manual
Star Tech Development Webcam ST121UTP User Manual
Swann Automobile Alarm Automobile Alarm User Manual