Sony Speaker ICFCS20BT User Manual

To preset radio stations manually  
Listening to Music by Wired Connection with a  
Portable Audio Device, etc.  
Pattern C  
ÔˎGetting Started  
ÔˎListening to Music  
4-468-397-13(1)  
You can manually preset a radio station which cannot be preset automatically.  
Connecting the AM Loop Antenna  
Connecting with a smartphone by One touch (NFC)  
1 Tune to a station you want to preset.  
The shape and length of the antenna is designed to receive AM signals. Do not  
dismantle or roll up the antenna.  
You can enjoy sound from the external device, such as a portable digital music  
player, through the speaker of this system. Be sure to turn off the power of the  
device before making any connections.  
By just touching the system with an NFC compatible smartphone, the system  
pairs and connects with the smartphone. (After making the BLUETOOTH  
connection, the system switches to the BLUETOOTH function automatically.)  
Connecting to a Power Source  
1 Plug the AC plug into a wall outlet firmly.  
Listening to Music by BLUETOOTH  
Connection with a Smartphone, etc.  
2 Press and hold DISPLAY/ENTER until “PRESET” begins to  
1 Raise the plastic stand and fit the antenna into the slot of  
flash in the display.  
the stand.  
Compatible smartphones  
3 Press PRESET +/– to select the preset number, and then  
Smartphones with the NFC function built-in  
(OS: Android 2.3.3 or later, excluding Android 3.x)  
Customers in the U.S.A.  
You can enjoy listening to music and basic remote control operation of a  
BLUETOOTH device via BLUETOOTH connection. The BLUETOOTH device is  
required to support the following BLUETOOTH profiles.  
ˎˎ  
press DISPLAY/ENTER to confirm.  
The station is preset and assigned to the selected preset number.  
Example: The following displays appear when you preset FM 89.8 MHz to  
preset number 2 for FM.  
Access the following Web site for details:  
http://esupport.sony.com/US  
A2DP (Advanced Audio Distribution Profile): enables you to enjoy high-quality  
ˎˎ  
audio content wirelessly.  
Personal Audio System  
Customers in Canada  
Access the following Web site for details:  
http://esupport.sony.com/CA  
AVRCP (Audio Video Remote Control Profile): enables you to enjoy basic remote  
ˎˎ  
control operation (play, stop, etc.) of a BLUETOOTH device.  
Operating Instructions  
Plastic stand  
Press the antenna into the  
stand until it clicks.  
About NFC  
NFC (Near Field Communication) is a technology enabling short-range wireless  
communication between various devices, such as mobile phones and IC tags.  
Thanks to the NFC function, data communication can be achieved easily just by  
touching the relevant symbol or designated location on NFC compatible devices.  
About the battery as a backup power source  
This system contains a CR2032 battery as a backup power source to keep the  
clock and the alarm operating during a power interruption. (No Power No  
Problem system)  
2 Insert the AM antenna connector in the AM ANTENNA jack  
on the rear of the system.  
Connecting cord  
(not supplied)  
1 Set the NFC function of the smartphone to on.  
Tip  
For details, refer to the operating instructions supplied with the smartphone.  
CAUTION  
ˎˎTo cancel the preset number, press OFF instead of DISPLAY/ENTER in step 3.  
If your smartphone OS is Android 2.3.3 or later, and less than Android 4.1:  
ˎˎ  
proceed to step 2.  
Notes on radio reception  
When to replace the battery  
When the battery becomes weak, “” lights up in the display.  
If a power interruption occurs while the battery is weak, the current time and  
alarm will be erased.  
Replace the battery with a Sony CR2032 lithium battery. Use of another battery  
may cause a fire or explosion.  
To replace the battery, see “Replacing the Battery” for details.  
If your smartphone OS is Android 4.1 or later: proceed to step 4.  
ˎˎ  
ˎˎDo not place the AM loop antenna near the system, power supply or other A/V equipment  
during use, as noise may result.  
AUDIO IN jack (stereo mini jack)  
on the rear of the system  
2 Download and install the app “NFC Easy Connect” on the  
ˎˎKeep digital music players or mobile phones away from the AM loop antenna or the FM  
antenna, as this may lead to reception interference.  
ˎˎWhen you are listening to radio with a BLUETOOTH device or USB device connected to the  
system, interference with radio reception may occur. In this case, terminate BLUETOOTH  
connection, or disconnect the USB device from the system.  
smartphone.  
“NFC Easy Connect” is an original app by Sony for Android phones, and is  
available at Google Play Store.  
Search for “NFC Easy Connect” or scan the following two-dimensional code to  
download and install the free app. Communication fees are required to  
download the app.  
1 Connect the device to the AUDIO IN jack on the rear of the  
system.  
To remove the AM loop antenna  
Push and hold down the tab of the antenna terminal clamp, and remove the AM  
loop antenna.  
Operations may vary depending on the BLUETOOTH device. Refer also to the  
operating instructions supplied with your BLUETOOTH device.  
Tip  
Note  
2 Press FUNCTION to select AUDIO IN.”  
ˎˎYou can use hands-free calling while listening to the radio on this system.  
ˎˎIf AM 12:00” flashes in the display when the system is connected to an AC outlet for the first  
time, the battery may be weak. In this case, consult your nearest Sony dealer.  
Press FUNCTION repeatedly until AUDIO IN” lights up in the display.  
The App may not be available in some countries and/or regions.  
1 Make the BLUETOOTH connection between the system and  
3 Start playback on the connected device, then adjust the  
Tip  
the device.  
©2013 Sony Corporation Printed in China  
ˎˎFor some smartphones, One-touch connection may be available without downloading  
the app “NFC Easy Connect.” In that case, the operation and specifications may be  
different from the description here. For details, refer to the operating instructions  
supplied with the smartphone.  
volume.  
For details on the BLUETOOTH connection procedure, see “How to Make  
Wireless Connection with BLUETOOTH Devices.” The BLUETOOTH connection is  
established and “ (BLUETOOTH)” in the display stays on.  
Set the volume of the connected device to a moderate level, and press the  
VOLUME –/+ on the system.  
Setting the Clock  
ICF-CS20BT  
After use  
By the two-dimensional code:  
Use a two-dimensional code reader app.  
Press FUNCTION or OFF to deactivate the AUDIO IN function. To stop  
playback on the connected device, operate the connected device.  
Right side of the system  
Notes when connecting the device by wired connection  
ˎˎThe necessary type of cable or connecting cord depends on the device. Be sure to use the  
correct type of cable or cord.  
ˎˎWhen you watching TV or listening to the radio with a device connected to the system, the  
reception may be poor.  
ˎˎWhen you listen to the radio with a device connected, turn off the connected device to  
prevent noise. If noise occurs, even when the device is turned off, disconnect and place the  
device away from the system.  
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A  
polarized plug has two blades with one wider than the other. A grounding  
type plug has two blades and a third grounding prong. The wide blade or the  
third prong are provided for your safety. If the provided plug does not fit into  
your outlet, consult an electrician for replacement of the obsolete outlet.  
10) Protect the power cord from being walked on or pinched particularly at plugs,  
convenience receptacles, and the point where they exit from the apparatus.  
11) Only use attachments/accessories specified by the manufacturer.  
12) Use only with the cart, stand, tripod, bracket, or table specified by the  
manufacturer, or sold with the apparatus. When a cart is used, use caution  
when moving the cart/apparatus combination to avoid injury from tip-over.  
English  
Personal Audio System  
How to Make Wireless Connection with  
BLUETOOTH Devices  
Before operating the system, please read this guide thoroughly and retain it for  
future reference.  
You can enjoy music and hands-free calling with the system wirelessly by using  
your device’s BLUETOOTH function.  
Owner’s Record  
2 Start playback on the BLUETOOTH device, then adjust the  
The model number and the serial number are located on the bottom.  
Record the serial number in the space provided below. Refer to them whenever  
you call upon your Sony dealer regarding this product.  
volume.  
3 Start the app “NFC Easy Connect” on the smartphone.  
Choose one of the following three connection methods, best suited for the  
BLUETOOTH device. For details on how to operate your device, refer to the  
operating instructions supplied with the device.  
Set the volume of the BLUETOOTH device to a moderate level, and press  
VOLUME –/+ on the system.  
Tip  
Make sure that the application screen is displayed.  
ˎˎYou can use hands-free calling while the cable or connecting cord is used with this system.  
4 Touch the system with the smartphone.  
Model No. ICF-CS20BT  
Serial No.  
After use  
Pattern A  
Pairing with a BLUETOOTH device: see  
Keep touching the smartphone on the N marked part of the system until the  
smartphone responds.  
Do any of the following to terminate the BLUETOOTH connection.  
BLUETOOTH devices need to be “paired” with each other beforehand.  
Listening to Radio  
Set the BLUETOOTH function of the BLUETOOTH device to off. For details, refer  
to the operating instructions supplied with the device.  
Turn off the BLUETOOTH device.  
ˎˎ  
Note  
Pattern B  
Connecting with a paired device: see  
WARNING  
ˎˎIf the screen of your smartphone is locked, the smartphone will not function. In this case,  
release the lock, then touch the smartphone on the N marked part again.  
ˎˎ  
To listen to music with a BLUETOOTH device that has been paired, see this  
pattern.  
Touch the system with the smartphone again to disconnect (NFC compatible  
ˎˎ  
smartphones only).  
DO NOT INGEST BATTERY, CHEMICAL BURN HAZARD  
This product contains a coin/button cell battery. If the coin/button cell battery is  
swallowed, it can cause severe internal burns in just 2 hours and can lead to  
death.  
Keep new and used batteries away from children. If the battery compartment  
does not close securely, stop using the product and keep it away from children.  
If you think batteries might have been swallowed or placed inside any part of the  
body, seek immediate medical attention.  
Smartphone responds (system recognized)  
(BLUETOOTH) lights up  
13) Unplug this apparatus during lightning storms or when unused for long  
periods of time.  
One-touch connection with a smartphone (NFC):  
Setting the clock for the first time  
System button functions during music playback  
You can operate a BLUETOOTH device that supports AVRCP. Available functions  
may vary depending on the BLUETOOTH device. Refer to the operating  
instructions supplied with the BLUETOOTH device.  
Pattern C  
see  
14) Refer all servicing to qualified service personnel. Servicing is required when  
the apparatus has been damaged in any way, such as power-supply cord or  
plug is damaged, liquid has been spilled or objects have fallen into the  
apparatus, the apparatus has been exposed to rain or moisture, does not  
operate normally, or has been dropped.  
This system is preset to the current EST (Eastern Standard Time) at the factory,  
and is powered by a backup battery. All you need to do the first time is just plug it  
in and select your time zone.  
Using an NFC compatible smartphone, you can establish BLUETOOTH connection  
by just touching the system with it.  
Right side of the system  
For details about NFC, see About NFC” in Pattern C .  
Buttons  
Functions  
1 Plug in the system.  
Check the following before operating the system.  
This graphical symbol is located on the bottom of the unit.  
Both the system and the device are placed within 1 m (3 ft) of each other.  
The system is connected to a power source.  
The operating instructions supplied with the device are kept at hand.  
ˎˎ  
ˎˎ  
ˎˎ  
The current EST (Eastern Standard Time) lights up in the display.  
For the state of California USA only  
Perchlorate Material –special handling may apply, see  
Press once to pause/resume playback.  
(play/pause)   
For customers in the USA:  
2 Press and hold OFF and CLOCK until area number “2”  
Press once to skip to the next/previous track.  
/(forward/  
begins to flash in the display.  
rewind)   
productregistration.  
Pattern A  
Rear of the system  
Press to adjust the volume.  
3 Press ALARM TIME SET +/– to select the number as  
Follow the on-screen instructions to establish the connection.  
The BLUETOOTH connection is established and “ (BLUETOOTH)” in the display  
stays on.  
VOLUME –/+   
Precautions  
Note when using with a mobile phone  
For Customers in Canada:  
follows:  
Pairing and connecting with a BLUETOOTH device  
Proper registration will enable us to send you periodic updates about new  
products, services and other important announcements. Registering your  
product will also allow us to contact you in the unlikely event that the product  
needs adjustment or modification. Thank you.  
Area number  
Time zone  
For details on operation of your mobile phone when receiving a telephone call  
while transmitting the sound using the BLUETOOTH connection, refer to the  
operating instructions supplied with the mobile phone.  
ˎˎ  
Tips  
1 Set the BLUETOOTH function of the BLUETOOTH device to  
ˎˎIf it is difficult to establish the connection, try the following.  
ˋˎActivate the app “NFC Easy Connect” and move the smartphone slightly on the N  
marked part of the system.  
Listening to Music by Wired Connection  
on.  
0
Newfoundland Standard Time  
Atlantic Standard Time  
Eastern Standard Time  
Central Standard Time  
Mountain Standard Time  
Pacific Standard Time  
Alaska Standard Time  
Hawaii Standard Time  
FM wire  
antenna  
For details, refer to the operating instructions supplied with the device.  
1
On safety  
ˋˎIf the smartphone is in a case, remove it.  
2 Press and hold BLUETOOTH PAIRING on the system  
until beeps are heard and “ (BLUETOOTH)” begins to flash  
quickly in the display.  
Listening to Music via USB Connection with an  
iPhone/iPod  
2 (default setting)  
The nameplate indicating Sony trademark, model number and electrical rating is  
located on the bottom exterior of this system.  
ˎˎTouch the system with the smartphone again to disconnect.  
ˎˎIf you have multiple NFC compatible devices, just touch the smartphone to a different  
device to switch the connection to that device. For example, when your smartphone is  
connected with NFC compatible headphones, just touch the smartphone to the system to  
change the BLUETOOTH connection to the system.  
WARNING  
3
4
5
6
7
To reduce the risk of fire or electric shock, do not expose this apparatus to  
dripping or splashing, and do not place objects filled with liquids, such as vases,  
on the apparatus.  
Presetting the radio stations automatically - Auto  
preset tuning  
Notes on the AC plug  
You can enjoy listening to music and play back an iPhone/iPod connected to the  
system via USB.  
Tip  
Plug the AC plug into a nearby wall outlet (mains). In the case of a problem,  
unplug it from the wall outlet (mains) immediately.  
ˎˎ  
ˎˎFrom the factory, pairing information is not stored in the system. In this case, if you only  
press BLUETOOTH PAIRING , “ (BLUETOOTH)” starts flashing quickly in the  
display.  
Update your device to the latest software version before use.  
Do not install the appliance in a confined space, such as a bookcase or built-in  
cabinet.  
You can preset receivable radio stations in your area automatically by auto preset  
tuning. You can preset up to 20 FM stations and 10 AM stations.  
Do not twist or place heavy objects on the AC plug cord.  
To disconnect AC power, grasp the plug itself, not the cord.  
ˎˎ  
ˎˎ  
Indications of the BLUETOOTH function  
As the main plug is used to disconnect the unit from the mains, connect the  
system to an easily accessible AC outlet. Should you notice an abnormality in the  
system, disconnect the main plug from the AC outlet immediately.  
1 Press FUNCTION to select “FM” or AM.”  
On placement  
Press FUNCTION repeatedly until “FM” or AM” lights up in the display.  
Do not set the speaker in an inclined position.  
ˎˎ  
4 Press DISPLAY/ENTER to confirm.  
Notes  
ˎˎTo cancel the time zone setting, press OFF instead of DISPLAY/ENTER in step 4.  
ˎˎThough the clock is correctly set at the factory, discrepancies may arise during transport or  
storage. If necessary, set the clock to the correct time by referring to “Setting the clock  
manually.”  
Do not leave the system in a location near heat sources, or in a place subject to  
direct sunlight, excessive dust, moisture, rain or mechanical shock.  
Do not expose the battery to excessive heat such as direct sunlight, fire or the  
like.  
ˎˎ  
2 Press and hold FUNCTION AUTO PRESET until AP”  
The system is not disconnected from the AC power source (mains) as long as it is  
connected to the wall outlet, even if the system itself has been turned off.  
(BLUETOOTH)  
flashes quickly  
begins to flash in the display.  
ˎˎ  
Battery may explode if mistreated. Do not recharge, disassemble or dispose of in  
fire.  
On operation  
Do not insert any small objects, etc., into the jacks. The system may short out or  
malfunction.  
ˎˎ  
On Copyrights and Licenses  
When daylight saving time (DST/summer time) begins  
Status  
Display  
The BLUETOOTH® word mark and logos are owned by the Bluetooth SIG, Inc. and  
any use of such marks by Sony Corporation is under license.  
The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the  
United States and in other countries.  
Android and Google Play are trademarks of Google Inc.  
iPad, iPhone, iPod, iPod classic, iPod nano, iPod touch and Mac are trademarks of  
Apple Inc. registered in the U.S. and other countries.  
This system automatically adjusts for daylight saving time (summer time).  
On cleaning  
BLUETOOTH function  
Pairing with a device  
Searching for a device  
Connected to a device  
“BLUETOOTH” lights up  
” lights up from the beginning of daylight saving time (summer time) and turns  
Do not use alcohol, benzine, or thinner to clean the cabinet.  
ˎˎ  
off at the end of the daylight saving time (summer time) automatically.  
(BLUETOOTH)” flashes quickly  
(BLUETOOTH)” flashes  
Others  
Daylight saving time (summer time) begins at: 2:00 AM on the second Sunday  
ˎˎ  
of March.  
USB cable*  
If you have any questions or problems concerning this system that are not  
covered in this manual, please consult your nearest Sony dealer.  
ˎˎ  
(not supplied)  
Standard time begins at: 2:00 AM on the first Sunday of November.  
ˎˎ  
3 Press DISPLAY/ENTER .  
(BLUETOOTH)” lights up  
3 Perform the pairing procedure on the BLUETOOTH device to  
Receivable radio stations will be preset automatically in order of frequency.  
Lightning is a trademark of Apple Inc.  
FOR UNITED STATES CUSTOMERS. NOT APPLICABLE IN CANADA,  
INCLUDING IN THE PROVINCE OF QUEBEC.  
detect the system.  
To cancel Auto DST/summer time adjustment during the daylight  
saving time (summer time) period  
“Made for iPod,” and “Made for iPhone” mean that an electronic accessory has  
been designed to connect specifically to iPod or iPhone, respectively, and has  
been certified by the developer to meet Apple performance standards. Apple is  
not responsible for the operation of this device or its compliance with safety and  
regulatory standards. Please note that the use of this accessory with iPod or  
iPhone may affect wireless performance.  
No Power No Problem is a trademark of Sony Corporation.  
Auto Time Set is a trademark of Sony Corporation.  
Other trademarks and trade names are those of their respective owners.  
Tip  
If “SONY: ICF-CS20BT” does not appear on the device’s display, repeat from  
step 1.  
ˎˎTo cancel auto preset tuning, press OFF .  
(USB) port on the rear of the system  
The Auto DST/summer time adjustment can be canceled.  
This symbol is intended to alert the user to the presence of  
important operating and maintenance (servicing) instructions in  
the literature accompanying the appliance  
Note  
*
USB cable: Use the Lightning to USB Cable or Dock Connector  
to USB Cable supplied with your iPhone/iPod.  
While the clock is displayed, press and hold OFF and DISPLAY/ENTER until  
ˎˎSome devices cannot display a list of detected devices.  
Listening to the radio from preset radio stations  
” and “OFF” light up in the display. Auto DST/summer time adjustment has  
been canceled, then the display returns to the clock.  
To activate Auto DST/summer time adjustment again, press and hold OFF and  
DISPLAY/ENTER until “ ” and “On” light up in the display.  
You can listen to the radio simply by selecting a preset number. Although radio  
frequencies are preset at the factory, we recommend you to preset receivable  
radio stations in your area by auto preset tuning.  
4 Select “SONY: ICF-CS20BT” shown in the display of the  
1 Connect the iPhone/iPod to the (USB) port on the rear of  
The Caution Marking is put on the Bottom Enclosure.  
BLUETOOTH device.  
the system.  
Notes  
5 If Passcode* input is required on the display of the  
1 Press FUNCTION to select “FM” or AM.”  
ˎˎChanges to Auto DST/summer time adjustment by the system (see above) are subject to  
circumstances and laws in each country/region. Should this interfere with desired  
adjustment, cancel the Auto DST/summer time adjustment and set the DST display manually  
as necessary. Customers living in a country/region that does not use daylight saving time  
(summer time) must cancel Auto DST/summer time adjustment before using the system.  
ˎˎWhen Hawaii Standard Time is set, Auto DST/summer time adjustment defaults to off. You  
can turn it on by the above operation.  
2 Press FUNCTION to select “USB.”  
Notes  
BLUETOOTH device, input “0000.”  
Press FUNCTION repeatedly until “FM” or AM” lights up in the display.  
Press FUNCTION repeatedly until “USB” lights up in the display.  
This system is not specified for use with an iPad via USB connection, and  
malfunction may result if used with one.  
ˎˎ  
The BLUETOOTH connection is established and “ (BLUETOOTH)” in the display  
stays on.  
* Passcode may be called “Passkey,” “PIN code,” “PIN number,” or “Password.”  
2 Press MODE to select “PRESET.”  
In the Operating Instructions, “iPod” is used as a general reference to functions  
on an iPhone, iPad or iPod, unless otherwise specified by the text or  
illustrations.  
ˎˎ  
Tip  
ˎˎTo pair with other BLUETOOTH devices, repeat steps 1 to 5 for each device.  
CAUTION  
Notes  
You are cautioned that any changes or modifications not expressly approved in  
this manual could void your authority to operate this equipment.  
Setting the clock manually  
ˎˎPairing mode of the system is canceled after about 5 minutes, and “ (BLUETOOTH)” in the  
display flashes slowly. If the pairing mode is canceled while performing this procedure, start  
over from step 2.  
To change the clock setting manually, operate the system as follows.  
Danger of explosion if battery is incorrectly replaced. Replace only with the same  
or equivalent type.  
ˎˎPasscode of the system is fixed as “0000.” The system cannot be paired with a BLUETOOTH  
device whose Passcode is not “0000.”  
ˎˎOnce BLUETOOTH devices are paired, there is no need to pair those devices again. However,  
in the following cases, you will need to perform the pairing procedure again.  
ˋˎPairing information is deleted after repair, etc.  
1 Plug in the system.  
3 Start playback on the connected iPhone/iPod, then adjust  
2 Press and hold CLOCK until the year digits begin to flash  
the volume.  
3 Press PRESET +/– to select the preset number for the  
To reduce the risk of fire or electric shock, do not expose this apparatus to rain or  
moisture.  
in the display.  
Set the volume of the connected iPhone/iPod to a moderate level, and press  
the VOLUME –/+ on the system.  
desired radio station.  
ˋˎThe system is paired with 5 or more devices.  
NOTE  
3 Press ALARM TIME SET +/– to select the year, and then  
The system can be paired with up to 4 BLUETOOTH devices. If a new device is paired after 4  
devices have been paired, the device whose latest connection time is the oldest among the  
4 paired devices is replaced by the new one.  
4 Press VOLUME –/+ to adjust the volume.  
Notes  
This equipment has been tested and found to comply with the limits for a Class B  
digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to  
provide reasonable protection against harmful interference in a residential  
installation. This equipment generates, uses and can radiate radio frequency  
energy and, if not installed and used in accordance with the instructions, may  
cause harmful interference to radio communications. However, there is no  
guarantee that interference will not occur in a particular installation. If this  
equipment does cause harmful interference to radio or television reception,  
which can be determined by turning the equipment off and on, the user is  
encouraged to try to correct the interference by one or more of the following  
measures:  
press CLOCK to confirm.  
ˎˎWhen a USB device other than an iPhone/iPod is connected to the system, only charging  
begins automatically.  
ˎˎDo not connect the multiple devices to the (USB) port of the system.  
Press and hold ALARM TIME SET +/– to change the year digits quickly.  
Once you confirm the setting by pressing CLOCK , the month digits begin  
to flash.  
To display the preset number and the frequency when listening  
to radio  
Press DISPLAY/ENTER once to display the preset number, and press again to  
display the frequency of the current station. To return to the clock display, press  
DISPLAY/ENTER once again; or after a few seconds the display will return  
automatically.  
ˎˎMore than one device can be paired with the system, but sound will be heard from just one  
of those devices.  
After use  
4 Repeat step 3 to set the month, day, hour and minute.  
Pattern B  
Press FUNCTION or OFF to deactivate the USB function.  
The seconds start incrementing from zero.  
Connecting with a paired BLUETOOTH device  
Notes  
System button functions during music playback  
ˎˎIf you do not press any button for about 1 minute while setting the clock, the clock setting will  
be canceled.  
ˎˎA 100-year calendar (2013 - 2112) is installed in the system. When the date is set, the day of  
the week is automatically displayed.  
MON = Monday, TUE = Tuesday, WED = Wednesday,  
THU = Thursday, FRI = Friday, SAT = Saturday, SUN = Sunday  
After use  
1 Set the BLUETOOTH function of the BLUETOOTH device to  
Buttons  
Functions  
Press FUNCTION or OFF to deactivate the radio function.  
on.  
ˋˎReorient or relocate the receiving antenna.  
Press once to pause/resume playback.  
(play/pause)   
Tips  
ˋˎIncrease the separation between the equipment and receiver.  
ˋˎConnect the equipment into an outlet on a circuit different from that to which  
the receiver is connected.  
To improve reception  
ˎˎWhen BLUETOOTH is pressed, the system tries to establish BLUETOOTH connection  
with the BLUETOOTH device connected to the system last time. The BLUETOOTH  
connection is established and “ (BLUETOOTH)” in the display stays on.  
ˎˎWhen “ (BLUETOOTH)” lights up in the display, the system is connected to a BLUETOOTH  
device. When you want to connect another BLUETOOTH device, terminate the current  
BLUETOOTH connection first by operating the connected BLUETOOTH device.  
Press once to skip to the next/previous track.  
Press and hold to fast-forward/fast-rewind.  
ˎˎ  
ˎˎ  
/(forward/  
rewind)   
For FM radio reception, extend the FM wire antenna fully to increase reception  
sensitivity.  
For AM radio reception, connect the supplied AM loop antenna to the system.  
Rotate the antenna horizontally for optimum reception.  
If stereo FM reception is noisy, press and hold MODE until “MONO” lights up  
in the display. You will lose the stereo effect, but noise will be reduced.  
ˎˎ  
ˎˎ  
ˎˎ  
To change the time format  
You can choose the displayed time format between the 12-hour system (default)  
or the 24-hour system.  
Press and hold OFF and SNOOZE/BRIGHTNESS for about 2 seconds.  
The time format toggles between the 12-hour system (AM 12:00” = midnight) and  
the 24-hour system (“0:00” = midnight).  
ˋˎConsult the dealer or an experienced radio/TV technician for help.  
Press to adjust the volume.  
VOLUME –/+   
This equipment must not be co-located or operated in conjunction with any other  
antenna or transmitter.  
2 Select “SONY: ICF-CS20BT” shown in the display of the  
The following FCC/IC statement applies only to the version of this model  
manufactured for sale in the U.S.A. and Canada. Other versions may not comply  
with FCC/IC technical regulations.  
BLUETOOTH device.  
Listening to the radio by manual tuning  
If necessary, select a BLUETOOTH profile that the system supports from the  
following: A2DP, HSP or HFP. For details on each profile, see “Listening to  
Music by BLUETOOTH Connection with a Smartphone, etc.” or “Using  
Hands-free Calling While Listening to Music.”  
To display the year and date  
While the clock is displayed, press CLOCK once to display the month and date,  
and press again to display the year. To return to the current time display, press  
CLOCK once again; or after a few seconds the display will return automatically.  
This equipment complies with FCC/IC radiation exposure limits set forth for an  
uncontrolled environment and meets the FCC radio frequency (RF) Exposure  
Guidelines in Supplement C to OET65 and RSS-102 of the IC radio frequency (RF)  
Exposure rules. This equipment has very low levels of RF energy that it deemed to  
comply without maximum permissive exposure evaluation (MPE). But it is  
desirable that it should be installed and operated keeping the radiator at least 20  
cm or more away from person’s body (excluding extremities: hands, wrists, feet  
and ankles).  
1 Press FUNCTION to select “FM” or AM.”  
Press FUNCTION repeatedly until “FM” or AM” lights up in the display.  
Note  
2 Press MODE to select “TUNING.”  
ˎˎThis step may not be necessary for some devices.  
The BLUETOOTH connection is established and “ (BLUETOOTH)” in the display  
stays on.  
For customers in Canada  
This device complies with Industry Canada licence-exempt RSS standard(s).  
Operation is subject to the following two conditions: (1) this device may not cause  
interference, and (2) this device must accept any interference, including  
interference that may cause undesired operation of the device.  
Important Safety Instructions  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with dry cloth.  
7) Do not block any ventilation openings.  
Install in accordance with the manufacturer’s instructions.  
8) Do not install near any heat sources such as radiators, heat registers, stoves,  
or other apparatus (including amplifiers) that produce heat.  
3 Press and hold TUNE +/– until the frequency digits begin  
to change quickly in the display.  
The system automatically scans the radio frequencies and stops when it finds  
a clear station (automatic tuning mode).  
If you cannot tune to a station using the automatic tuning mode, press TUNE  
+/– repeatedly to change the frequency step by step.  
When an FM stereo broadcast is received, “ST” lights up in the display.  
4 Press VOLUME –/+ to adjust the volume.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sennheiser Network Router LSP 500 PRO User Manual
Sharp Fax Machine Version 25 User Manual
SonicWALL Security Camera TZ170SP User Manual
Sony Stereo System 3 097 194 151 User Manual
Southbend Lathe sb1016 User Manual
Star Trac Fitness Electronics E RB User Manual
Sunbeam Electric Grill S T 6 5 0 1 E P B User Manual
Sunbeam Microwave Oven SBMW709BLS User Manual
Sylvania DVD Player DVL1000G User Manual
Symphonic TV DVD Combo WF20D4 User Manual