User guide
®
Bluetooth Speaker
BSP10
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Function overview
The BSP10 Bluetooth® Speaker accessory lets you enjoy high-quality audio and
make conference calls both indoors and outdoors.
Hardware overview
1
2
3
4
5
6
7
8
9
Microphone
Call button
Bluetooth notification light
NFC detection area
Volume up button
Volume down button
Speaker
Power button
Power notification light/Cover for micro USB port
Notification light status
Flashing rapidly
Pairing mode – The BSP10 accessory is ready to pair with an Xperia™ device
Steady blue light The BSP10 accessory is paired with an Xperia™ device
Steady white light Standby mode – The BSP10 accessory is ready to connect with a previously paired
device
3
This is an Internet version of this publication. © Print only for private use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Charging
To charge your accessory
There are two ways to charge your accessory:
•
•
Place the BSP10 accessory on any wireless charging plate which supports the Qi
inductive power standard.
Using a USB cable, connect the BSP10 accessory to a power source.
4
This is an Internet version of this publication. © Print only for private use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting started
Preparing your accessory for use with an Xperia™ device
Before you can use your BSP10 accessory with an Xperia™ device, for example, to
play music or handle incoming calls, you must first pair the two devices. You can pair
your BSP10 accessory with an Xperia™ device using either the Bluetooth® or NFC
functions. Once the devices are paired, your BSP10 accessory automatically
establishes a connection with the Xperia™ device.
To pair the BSP10 with an Xperia™ device using NFC
1
2
3
Xperia™ device: Make sure that the NFC function is turned on and that the
screen is active and unlocked.
BSP10: Press and hold down the power button until you hear a beep and a
blue notification light flashes rapidly.
Position your Xperia™ device in such a way that the NFC detection area of
each device touches the other. When the BSP10 accessory is successfully
paired with the Xperia™ device, the notification light turns solid blue.
To pair the BSP10 with an Xperia™ device using Bluetooth®
1
2
Xperia™ device: Make sure the Bluetooth® function is turned on.
BSP10: Press and hold down the power button until you hear a beep and a
blue notification light flashes rapidly.
Xperia™ device: Search for and connect to the BSP10 accessory. When the
accessory is successfully paired with the Xperia™ device, the notification light
turns solid blue.
3
To answer incoming calls with the BSP10
1
2
Make sure the BSP10 accessory is connected with an Xperia™ device that
supports call handling.
When a call comes in, press
.
The calling function is not supported for VoIP (Voice-over-Internet Protocol) calls.
To listen to music with the BSP10
1
2
Make sure the BSP10 accessory is connected with an Xperia™ device.
Play an audio or video file on the Xperia™ device. The sound is automatically
played through the speakers of the paired BSP10 accessory.
5
This is an Internet version of this publication. © Print only for private use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Disconnecting and reconnecting
Disconnection and reconnection methods
There are several ways to disconnect your Xperia™ device from or reconnect it with
your BSP10 accessory. You can only have one Xperia™ device connected with your
accessory at any one time. To pair and connect with a second device, you must first
disconnect the currently connected Xperia™ device.
To disconnect a paired Xperia™ device from the BSP10
Perform one of the following actions:
•
•
On the Xperia™ device, deselect BSP10 in the list of paired Bluetooth® devices.
Place the Xperia™ device over the BSP10 accessory so that the NFC detection area
of each device touches the other. The accessory goes into pairing mode and the
currently paired Xperia™ device gets disconnected.
On the BSP10 accessory, short press the volume up and down buttons at the same
time. The accessory goes into pairing mode and the currently paired Xperia™ device
gets disconnected.
•
To reconnect a previously paired Xperia™ device with the BSP10
Perform one of the following actions:
•
•
On the Xperia™ device, select BSP10 in the list of paired Bluetooth® devices.
Place the previously paired Xperia™ device over the BSP10 accessory so that the
NFC detection area of each device touches the other. The accessory goes into
pairing mode and then reconnects automatically with the previously paired device.
On the BSP10 accessory, short press the volume up and down buttons at the same
time. The accessory goes into pairing mode and then reconnects automatically with
the previously paired device.
•
To stop an existing connection and connect with a different Xperia™ device
1
2
Disconnect the currently paired Xperia™ device from the BSP10 accessory.
Follow the relevant instructions to pair the other Xperia™ device with the
BSP10 accessory using either NFC or Bluetooth.
6
This is an Internet version of this publication. © Print only for private use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
I cannot answer a second call
•
•
Make sure that your calling device supports the Bluetooth® Handsfree Profile (HFP).
Make sure that the correct calling device is selected.
The BSP10 accessory turns off unexpectedly
•
If the BSP10 accessory beeps several times shortly before turning off, the battery
level is low. Charge the battery.
Unexpected behaviour
•
•
When the BSP10 accessory is powered on, press the power button, then connect the
USB charger cable to the BSP10 and remove the cable again almost immediately. No
data loss is incurred using this recovery/reset method.
When the BSP10 accessory is powered on, long press the call button. The BSP10
restarts and all information about pairings with other devices gets removed.
I can't pair a second device with my BSP10 accessory
•
Disconnect the currently connected device from your BSP10 accessory, then pair the
second device with the BSP10.
No connection between BSP10 and an Xperia™ device
•
•
Make sure that the BSP10 accessory is charged and within range of the device that
you want to connect to. A maximum distance of 10 metres (33 feet), with no solid
objects in between, is recommended.
Disable the Bluetooth® function in the other Xperia™ device so that all connections
are closed, then re-enable the Bluetooth® function and try to pair the BSP10
accessory with the Xperia™ device again.
7
This is an Internet version of this publication. © Print only for private use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Legal information
SONY BSP10
Prior to use, please read the Important information leaflet separately provided.
This User guide is published by Sony Mobile Communications Inc. or its local affiliated company, without any
warranty. Improvements and changes to this User guide necessitated by typographical errors, inaccuracies of
current information, or improvements to programs and/or equipment, may be made by Sony Mobile
Communications Inc. at any time and without notice. Such changes will, however, be incorporated into new
editions of this User guide.
Do not place the BSP10 speaker near your ear when
playing music or handling calls in order to avoid
damage to your hearing. Also, to protect your
hearing, it’s not recommended to listen to music
with the BSP10 for more than 3 hours at a time.
©Sony Mobile Communications Inc., 2014
All rights reserved.
Interoperability and compatibility among Bluetooth® devices varies. The device generally supports products
utilizing Bluetooth spec. 1.2 or higher, and Headset or Handsfree profile.
Sony is the trademark or registered trademark of Sony Corporation. Bluetooth is the trademark of Bluetooth
(SIG) Inc. and is used under license. All other marks are the property of their respective owners. All rights
reserved.
All product and company names mentioned herein are the trademarks or registered trademarks of their
respective owners. Any rights not expressly granted herein are reserved. All other trademarks are property of
their respective owners.
All illustrations are for illustration only and may not accurately depict the actual accessory.
Declaration of Conformity for BSP10
We, Sony Mobile Communications AB of
Nya Vattentornet
SE-221 88 Lund, Sweden
declare under our sole responsibility that our product
Sony type RD-0160
and in combination with our accessories, to which this declaration relates is in
conformity with the appropriate standards EN 300 328:V1.8.1, EN 300 330-2:V1.5.1,
EN 301 489-7:V1.3.1, EN 301 489-17:V2.2.1, EN 301 489-3:V1.6.1 and EN 60 950-1:
2006+A11:2009+A1:2010+A12:2011, EN 62 311:2008 following the provisions of,
Radio Equipment and Telecommunication Terminal Equipment directive 1999/5/EC.
Lund, July 2014
Anders Grynge
Director, Head of Global Type Approval
We fulfil the requirements of the R&TTE Directive (1999/5/EC).
FCC Statement
This device complies with Part 15 of the FCC rules. Operation is subject to the following two
conditions: (1) This device may not cause harmful interference, and (2) This device must
accept any interference received, including interference that may cause undesired operation.
Any change or modification not expressly approved by Sony may void the user's authority to operate the
equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful
8
This is an Internet version of this publication. © Print only for private use.
Download from Www.Somanuals.com. All Manuals Search And Download.
interference in a residential installation. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to
radio communications. However, there is no guarantee that interference will not occur in a particular
installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of
the following measures:
•
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.
AVISO IMPORTANTE PARA MÉXICO
La operación de este equipo está sujeta a las siguientes dos condiciones: (1) es posible que este equipo o
dispositivo no cause interferencia perjudicial y (2) este equipo o dispositivo debe aceptar cualquier
interferencia, incluyendo la que pueda causar su operación no deseada.
Para consultar la información relacionada al número del certificado, refiérase a la etiqueta del empaque y/o del
producto.
Alimentación: 5,0 Vcc
Industry Canada Statement
This device complies with RSS-210 of Industry Canada.
Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this
device must accept any interference, including interference that may cause undesired operation of the device.
This Class B digital apparatus complies with Canadian ICES-003.
Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.
Avis d’industrie Canada
Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de
licence.
L'exploitation est autorisée aux deux conditions suivantes: (1) l'appareil ne doit pas produire de brouillage, et,
and (2) l'utilisateur de l'appareil doit accepter tout brouillage radioélectrique subi, même si le brouillage est
susceptible d'en compromettre le fonctionnement.
9
This is an Internet version of this publication. © Print only for private use.
Download from Www.Somanuals.com. All Manuals Search And Download.
|