3-867-248-22 (1)
DIRECTV Dig it a l
Sa t e llit e Re ce ive r
Operating Instructions
Before you begin using your Digital Satellite Receiver for
the first time, follow the instructions in “Connecting Your
Digital Satellite Receiver” on pages 6-13 and “Setting Up
Your Digital Satellite Receiver” on pages 22-33.
Also, make sure your Satellite Dish Antenna has been
properly installed and call your service provider to begin
service:
DIRECTV: 1-800-DIRECTV (347-3288)
SAT-A50 MODEL ONLY
RF ANTENNA: This Digital Satellite Receiver is shipped
with IR reception enabled and RF reception disabled. To
use the RF feature (and the RF Antenna) you must change
the factory setting (IR only) to the RF setting (RF only)
using the on-screen displays, as described in these
Operating Instructions.
®
SAT-A50
SAT-B50
© 1999 by Sony Electronics Inc. Reproduction in whole or in part without written permission is prohibited.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started!
Connecting Your Digital
Satellite Receiver (Page 6)
Using Your Remote Control
(Page 14)
+
1
2
3
4
5
6
7
8
9
0
SATELLITE
RECEIVER
Setting Up Your Digital
Satellite Receiver (Page 22)
Using the Program Guide
(Page 36)
Using the Favorite Stations
Guide (Page 39)
Setting Locks & Limits
(Page 53)
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Features
Congratulations on your purchase of the Sony Digital Satellite Receiver. This manual can
help you to become familiar with the many great features of the Digital Satellite Receiver.
Check below to find out about some of the most exciting features.
Convenience and Ease-of-Use
• Access all the system features and functions with the easy-to-use on-screen menu icons.
See page 21.
• The Program Guide shows the picture and sound in the Media Window™ while you check
station and program information. See page 36.
• The Alpha List lets you search for your favorite programs by name. See page 35.
• The Category Guide displays program choices by type, including Sports and Movies, and
adds sub-categories like Drama and Comedy. See page 37.
• The Station Index with Surf feature lets you view your current program in the Media
Window while checking other stations in the Station Index. See pages 38 and 46.
• The One Button Record and VCR Control features allow you to easily record your favorite
programming on your VCR. See pages 25–27 and page 60.
• SAT-A50 model: Operate your Digital Satellite Receiver from another room or from
behind a cabinet by setting up the RF feature on your remote control. See pages 31–33.
Excellent Performance
• Use the Timer & Rec feature to be sure you won’t miss your favorite programs.
See page 60.
• The Auto Title Insert feature for VCR recording can display program information at the
beginning of any Timer & Rec event. You’ll have a convenient “title” recorded at the
beginning of your tapes. See page 25.
• Chose to listen to different audio tracks available with many programs. See page 64.
• SAT-A50 model: Select Dolby Digital audio to truly make your home theater come alive.
See page 64.
Easy to Customize
• Organize the channels your family watches most often by setting up the Favorite Stations
guide. See pages 39–41.
• Control access to programming with the Locks & Limits feature. See pages 53–58.
• Set up the Custom Stations feature to exclude stations that you don’t want to see from the
Program Guide, Category Guide and Station Index. See pages 49–50.
• Choose your favorite color palette for the on-screen displays. See pages 46–47.
• Select if stations are listed in numerical or alphabetical order with the Station Order
feature. See page 46.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Adjusting the Displays
(PREFERENCES)..................................................45
Connecting Your Digital Satellite
Receiver
View ing Messages
(MESSAGES) ......................................................52
Step 2: Connecting the Satellite Dish Antenna
and Telephone Line ............................................ 8
Setting Locks and Limits
(LOCKS & LIMITS)..............................................53
Step 6: Connecting the RF Antenna
(SAT-A50 only).................................................. 12
Checking Pay Per View Purchases
(PURCHASES).....................................................59
Scheduling Programs
(TIMER & REC) ...................................................60
View ing Pictures From Your Digital
Satellite Receiver
Setting Audio Options
(AUDIO) .............................................................64
Setting Up Your Digital Satellite Receiver
(SYSTEM)........................................................... 22
Selecting RF or IR Remote Control Reception
(SAT-A50 only).................................................................. 31
View ing Station and Program Information
(GUIDES)............................................................ 34
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n n e ct in g Yo u r Dig it a l Sa t e llit e Re ce ive r
Ca rt o n Co n t e n t s
Check to make sure the following items are in the Digital Satellite
Receiver’s carton.
If you are missing any items, contact your Sony dealer.
RF Antenna**
Digital Satellite
Receiver
3
+
6
2
9
5
1
Access Card
8
4
0
7
Remote
E
IT
E
IV
R
L
L
E
T
E
C
A
S
E
R
Control*
AC Pow er Cord
Size AA Batteries
VCR Controller
Audio/Video Cable
RF Coaxial Cable
Telephone Cord
S-Video Cable**
* The RM-Y802 Remote Control shown.
** The RF Antenna and S-Video cable are not included with the SAT-B50
model.
Note
Keep the original carton and packing materials to safely transport the Digital Satellite
Receiver in the future.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Co n n e ct io n
Ove rvie w
St e p 1: In se rt in g t h e
Ba t t e rie s
Follow the procedures or make the connections in
each of the steps to connect your Digital Satellite
Receiver.
Before you can use the remote control, you must
insert the supplied batteries. If you want to use this
remote control to operate other audio/ video
equipment, such as a TV or VCR, you must set up the
remote control (see page 65).
Step 1: Inserting the Batteries
Page 7
1 Push and slide open the battery
compartment.
v
Step 2: Connecting the Satellite
Dish Antenna and
Telephone Line
Page 8
v
2 Insert tw o size AA batteries
(supplied).
Step 3: Connecting Your TV
Page 9
Be sure to match the + and – marks on the
batteries with the + and – marks inside the battery
compartment.
v
Step 4: Adding a VCR and
Audio System
(advanced connection)
Page 10
v
Notes
• When the batteries become weak, the Function button
indicators flash. If the remote control does not work
properly, the batteries may be weak.
• When replacing batteries, replace both batteries with new
ones. Do not mix different types of batteries together.
• When you remove the batteries, any manufacturer codes
you’ve set up may be erased. To set up the remote control
again, see “Setting Up the Remote Control” on page 65.
Step 5: Connecting the VCR
Controller
(advanced connection)
Page 11
v
Step 6: Connecting the RF
Antenna (SAT-A50 only)
(advanced connection)
Page 12
v
Step 7: Connecting the AC
Pow er Cord
Page 13
v
Step 8: Inserting the Access
Card
Page 13
7
Download from Www.Somanuals.com. All Manuals Search And Download.
St e p 2: Co n n e ct in g t h e Sa t e llit e Dish An t e n n a
a n d Te le p h o n e Lin e
The SATELLITE IN jack sends power to, and receives satellite signals
from, the Satellite Dish Antenna. The telephone line connection
periodically sends information about your receiver and Access Card to
your service provider.
Digital Satellite Receiver
CH3
CH4
ACCESS CARD
RF REMOTE
VIDEO
AUDIO
SATELLITE IN
ATA
LOW SPEED D
VHF/UHF IN
1
2
DIGITAL
OUT
S VIDEO
(OPTICAL)
VHF(SAT)/UHF
OUT
AC IN~
L(MONO)
VIDEO OUT
R
TEL LINE
OL
VCR CONTR
1
2
Connect the TEL LINE
jack to a telephone
line w all jack using
the supplied
2
1
Connect the SATELLITE IN
jack to your Satellite Dish
Antenna using RG-6
coaxial cable.
telephone cord.
RG-6 Coaxial Cable from
Satellite Dish Antenna
Telephone Cord
Notes
• The SAT-A50 model is shown.
Connections for the SAT-B50
model are the same.
• Your Satellite Dish Antenna
Installation/ Operating
Instructions provides detailed
instructions on how to install
RG-6 coaxial cable from your
Satellite Dish Antenna.
CAUTION
Only connect your authorized
Satellite Dish Antenna to the
SATELLITE IN jack as described
in the Installation/ Operating
Instructions.
Connecting any other equipment
to this jack could result in damage
to the equipment and/ or receiver.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
St e p 3: Co n n e ct in g Yo u r TV
Connect your TV to the Digital Satellite Receiver as shown below. Refer
to your TV’s instruction manual for more information.
If you have a local TV antenna or cable
company service
1
Connect it to the VHF/ UHF IN jack on your Digital
Satellite Receiver using a coaxial cable or RF
adapter (not supplied).
You can view local stations using your TV controls.
Note
You must use the VHF(SAT)/ UHF OUT jack to
connect to your TV or VCR when a local TV antenna
or cable company service is connected to the
VHF/ UHF IN jack (see “2c” below and on page 10).
Coaxial
Cable
1
Digital Satellite Receiver
CH3
CH4
ACCESS CARD
RF REMOTE
VIDEO
AUDIO
SATELLITE IN
ATA
LOW SPEED D
VHF/UHF IN
1
DIGITAL
OUT
(OPTICAL)
S VIDEO
2
VHF(SAT)/UHF
OUT
AC IN~
L(MONO)
R
TEL LINE
OL
VCR CONTR
VIDEO OUT
2a
2b
2c
VIDEO
(yellow )
OR
S-Video
Cable
2a
A/V Cable
If your TV has A/V input
jacks
2c If your TV does not have
A/V jacks
S-Video
Connect the VIDEO OUT
jacks on your Digital
Satellite Receiver to the
A/ V input jacks on your TV
using the supplied A/ V
cable. (Be sure to match the
colors on the jacks with the
colored plugs on the A/ V
cable.)
Coaxial
Cable
Connect the VHF(SAT)/ UHF
OUT jack to the VHF/ UHF
input jack on your TV using
coaxial cable.
Set the CH3/ CH4 switch to the
channel that does not carry off-
air broadcasts in your area.
TV
IN
VHF/UHF
S VIDEO
VIDEO
L(MONO)
-AUDIO-
R
Note
With this connection, your
input source is channel 3 or
channel 4 depending on how
you set the CH3/ CH4 switch
on the receiver.
If your TV has an S-Video
input
Use the S-Video cable
instead of the yellow video
connection.
2b
If your TV has only one
audio input, connect it to
the L(MONO) jack on the
receiver.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
St e p 4: Ad d in g a VCR a n d Au d io Syst e m
You can record programs by adding a VCR. You can also connect your
Digital Satellite Receiver to an audio system for enhanced sound
enjoyment.
Audio Receiver
If you have a
digital or Dolby®
Digital audio
system (SAT-A50
only)
1a
OPTICAL
IN
1b
If you have a stereo
or Dolby Pro Logic®
audio system
LINE
OUT
AUDIO
LINE
IN
Connect the upper
AUDIO R and L(MONO)
jacks on the Digital
Satellite Receiver to the
audio inputs of your
stereo amplifier.
1a
Connect the
1b
DIGITAL OUT
(OPTICAL) of the
Digital Satellite
Receiver to the
optical digital
input of your audio
system.
Optical Cable
(SAT-A50 only)
(optional Sony
Stereo
Cable
accessory POC-15A)
z Tip
Digital Satellite Receiver
If you connect your
Digital Satellite
Receiver to a Dolby
Digital receiver, set
the Dolby Digital
option of the Audio
display to Auto
Select. See “Setting
Audio Options
(AUDIO)” on page
64 for more
CH3
CH4
ACCESS CARD
RF REMOTE
VIDEO
AUDIO
SATELLITE IN
VHF/UHF IN
1
2
DIGITAL
OUT
(OPTICAL)
S VIDEO
TA
LOW SPEED DA
VHF(SAT)/UHF
AC IN~
L(MONO)
VIDEO OUT
R
OUT
TEL LINE
VCR CONTROL
2a
2c
information.
If your TV and VCR do
not have A/V jacks
Connect the VHF(SAT)/
UHF OUT jack on the
Digital Satellite Receiver to
the VHF/ UHF input jack
on your VCR using coaxial
cable.
Then, connect the VHF/
UHF output jack on your
VCR to the VHF/ UHF
input jack on your TV using
coaxial cable.
2c
2b
2a
If your TV and VCR have A/V
jacks
VCR
Connect the VIDEO OUT jacks of
your Digital Satellite Receiver to
the A/ V input jacks of your VCR
using the supplied A/ V cable.
Then, connect the A/ V output
jacks of your VCR to the A/ V
input jacks of your TV using an
A/ V cable. (Be sure to match the
colors on the jacks with the
colored plugs on the A/ V cable.)
LINE
IN
IN
VIDEO S VIDEO
AUDIO
LINE
OUT
OUT
Set the CH3/ CH4 switch to
the channel that does not
carry off-air broadcasts in
your area.
2c
2a
2b
A/V Cable
S-Video
Cable
Note
VIDEO
(yellow )
OR
2b If your TV and VCR have
S-Video jacks
With this connection
your, input source is
channel 3 or channel 4
depending on how you
set the CH3/ CH4 switch
on your VCR.
Coaxial
Cable
Use the S-Video cable instead of
the yellow video connection.
S-Video
TV
IN
VHF/UHF
z Tip
S VIDEO
To allow your Digital Satellite
Receiver to control the recording
functions of your VCR, See “Step
5: Connecting the VCR
Controller” on page 11.
VIDEO
L(MONO)
-AUDIO-
R
10
Download from Www.Somanuals.com. All Manuals Search And Download.
St e p 5: Co n n e ct in g t h e VCR Co n t ro lle r
Connect the VCR Controller to allow the Timer & Rec feature to
automatically operate your VCR.
See “Setting Up the VCR Control Feature” on page 25 for information
about setting up the Digital Satellite Receiver to work with your VCR.
Digital Satellite Receiver
1a
To allow the Digital
Satellite Receiver to
control your VCR
Connect the VCR Controller
to the VCR CONTROL jack
on the receiver.
CH3
CH4
ACCESS CARD
RF REMOTE
VIDEO
AUDIO
SATELLITE IN
VHF/UHF IN
1
2
DIGITAL
OUT
(OPTICAL)
S VIDEO
LOW SPEED DATA
VHF(SAT)/UHF
OUT
AC IN~
L(MONO)
VIDEO OUT
R
TEL LINE
VCR CONTROL
1a
VCR Controller
Cable
VCR Controller
IR Sensor
VCR (front view )
In front of the VCR
Place the VCR Controller under and in
front of the VCR.
The VCR Controller must extend just
in front of the infrared sensor of the
VCR.
z Tip
If the infrared sensor is not marked
on your VCR, shine a flashlight into
the front panel of the VCR to locate
the sensor.
VCR (side view )
1
" "
to 1
/2
VCR
Controller
Connecting a Sony SmartFile™ VCR
Digital Satellite Receiver
1b If you are using a Sony
SmartFile VCR to take
CH3
CH4
ACCESS CARD
RF REMOTE
VIDEO
advantage of the Program Data
Dow nload feature
AUDIO
SATELLITE IN
VHF/UHF IN
1
2
DIGITAL
OUT
(OPTICAL)
S VIDEO
TA
LOW SPEED DA
Use this connection instead of the
VCR Controller connection. For
information about setting up the
VCR Control feature, see page 25.
For details about the Program Data
Download feature, refer to your
SmartFile VCR Operating
VHF(SAT)/UHF
OUT
AC IN~
L(MONO)
VIDEO OUT
R
TEL LINE
VCR CONTROL
1b
Monaural Cable (supplied w ith
SmartFile VCR)
Instructions.
Sony SmartFile VCR
CPD IN
LINE
IN
IN
VIDEO S VIDEO
AUDIO
LINE
OUT
OUT
11
Download from Www.Somanuals.com. All Manuals Search And Download.
St e p 6: Co n n e ct in g t h e RF An t e n n a
(SAT-A50 o n ly)
With the SAT-A50 model you can connect the RF Antenna and operate
the Digital Satellite Receiver when installed in a cabinet or from another
room in your house using the remote control. See page 31 for information
about how to set up the Digital Satellite Receiver to use the RF feature.
1
If you w ant to use the RF
feature
RF Antenna
Connect the RF Antenna to
the RF REMOTE jack of the
Digital Satellite Receiver.
Then, place the RF Antenna
in a convenient location.
1
Digital Satellite Receiver
CH3
CH4
ACCESS CARD
RF REMOTE
VIDEO
AUDIO
SATELLITE IN
ATA
LOW SPEED D
VHF/UHF IN
1
2
DIGITAL
OUT
S VIDEO
(OPTICAL)
VHF(SAT)/UHF
OUT
AC IN~
L(MONO)
VIDEO OUT
R
TEL LINE
OL
VCR CONTR
Notes
• Do not place the RF Antenna
directly on top of the Digital
Satellite Receiver or any other
metal object. For best results,
place the RF Antenna in a visible
location.
• The operating range of the
remote control is about 100 feet
when using the RF feature. This
may decrease due to ambient
reception conditions, weak
batteries, etc.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
St e p 7: Co n n e ct in g t h e AC Po w e r Co rd
After all other connections are complete, connect the AC Power Cord to
the Digital Satellite Receiver.
Digital Satellite Receiver
CH3
ACCESS CARD
RF REMOTE
CH4
AUDIO
VIDEO
SATELLITE IN
ATA
LOW SPEED D
VHF/UHF IN
1
2
DIGITAL
OUT
(OPTICAL)
S VIDEO
VHF(SAT)/UHF
OUT
AC IN~
L(MONO)
VIDEO OUT
R
TEL LINE
OL
VCR CONTR
AC Pow er Cord
to pow er outlet
St e p 8: In se rt in g t h e Acce ss Ca rd
After you insert the Access Card and your Satellite Dish Antenna is
installed, you are ready to begin enjoying digital satellite programming.
Call DIRECTV at 1-800-DIRECTV (347-3288) to begin service.
Digital Satellite Receiver
CH3
ACCESS CARD
RF REMOTE
CH4
AUDIO
VIDEO
SATELLITE IN
ATA
LOW SPEED D
VHF/UHF IN
1
2
DIGITAL
OUT
(OPTICAL)
S VIDEO
VHF(SAT)/UHF
OUT
AC IN~
L(MONO)
VIDEO OUT
R
TEL LINE
OL
VCR CONTR
Access Card
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Vie w in g Pict u re s Fro m Yo u r Dig it a l Sa t e llit e Re ce ive r
Usin g Yo u r Re m o t e Co n t ro l
RM-Y802 Remote Control (SAT-A50 model)
1 MUTING button
Mutes the volume. Press again to restore the
POWER
SAT
volume. To operate your TV, you must first set
up the remote control (see page 65).
MUTING
CABLE
TV
1
qa
FUNCTION
TV
AUDIO
VOLUME CABLE
SAT
2 AUDIO VOLUME buttons
+
qs
qd
qf
SLEEP
TV/SAT TV/VIDEO
2
3
Adjust the volume of your audio receiver. To
operate your audio receiver, you must first set up
the remote control (see page 65).
1
4
2
3
6
5
8
0
3 SLEEP button
qg
7
9
Sets the TV to turn off automatically after a
certain amount of time (if your TV has the Sleep
feature). To operate your TV, you must first set
up the remote control (see page 65).
DISPLAY
ENTER
4
5
ALT AUDIO
JUMP
qh
FAVORITE INDEX CATEGORY GUIDE
6
7
qj
qk
ql
w;
4 DISPLAY button
Opens the program information display for the
current program.
VOL
CH
MENU
8
5 ALT AUDIO button
EXIT
Switches among the available audio broadcasts.
9
0
wa
ws
VTR3 2 DVD AMP
RM-Y802
CODE SET
6 FAVORITE button
Opens the Favorite Stations guide.
7 INDEX button
Opens the Station Index.
SATELLITE
RECEIVER
8 VOL buttons
Adjust the volume. To operate your TV, you
must first set up the remote control (see page 65).
POWER
MUTING
9 Joystick
CABLE
TV
SAT
Moving the joystick up, down, left, right, and
diagonally moves the highlight in on-screen
displays. Press the joystick to select the
highlighted item.
FUNCTION
TV
TV/VTR CABLE
SAT
wd
wf
wh
wj
POWER
+
CH
q; CODE SET button
wk
POSITION
Lets you program the remote control to operate
your TV and other audio/ video equipment (see
page 65).
-
PIP
SWAP
AUDIO
+
wg
CH
OFF
-
z Tip
You may need to set up the remote control to operate your
other audio/ video equipment. See “Setting Up the Remote
Control” on page 65 for details.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
qa POWER buttons
wa EXIT button
Turn on and off the Digital Satellite Receiver, TV
and VTR (VCR). To operate your TV or VTR
(VCR), you must first set up the remote control
(see page 65).
Closes all on-screen displays including program
guides and menus.
ws VTR3/2/DVD/AMP sw itch
Sets the remote to operate other devices in your
A/ V system. To operate these other devices, you
must first set up the remote control (see page 65).
qs FUNCTION buttons
Select the equipment (CABLE, TV or SAT) that
you want to operate. The indicators light up to
show which device the remote control is
operating. To operate your TV or cable box, you
must first set up the remote control (see page 65).
wd TV/VTR button
Switches between the TV and VTR (VCR) inputs
of your TV. To operate your TV, you must first
set up the remote control (see page 65).
qd TV/VIDEO button
Switches between the various inputs of your TV.
To operate your TV, you must first set up the
remote control (see page 65).
wf VCR Control buttons
Operate VCR features such as play, record,
pause, stop, and fast wind. To operate your VCR,
you must first set up the remote control (see page
65).
qf TV/SAT button
Switches the output of your Digital Satellite
Receiver between regular TV and satellite
broadcasts. To receive regular TV broadcasts,
you must have a local TV antenna or cable
company connection (see page 9).
wg PIP control buttons
Operate the Picture-in-picture features of your
TV (if your TV has PIP). To operate your TV, you
must first set up the remote control (see page 65).
wh FUNCTION buttons
qg 0–9 and ENTER buttons
Select the equipment (CABLE, TV or SAT) that
you want to operate. The indicators light up to
show which device the remote control is
operating. To operate your TV or cable box, you
must first set up the remote control (see page 65).
Change channels directly, and enter numerical
values in on-screen displays.
qh JUMP button
Changes channels to the previously tuned
channel.
wj POWER button
Turns on or off the equipment selected with the
qj GUIDE button
Opens the Program Guide.
VTR3/ 2/ DVD/ AMP switch.
qk CATEGORY button
wk CH +/– buttons
Opens the Category Guide.
Change channels in numerical order on the
equipment selected with the VTR3/ 2/ DVD/
AMP switch.
ql MENU button
Opens the Main Menu.
w; CH buttons
Change channels. When a program guide is
open, pressing the CH buttons pages through the
guide.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Usin g Yo u r Re m o t e Co n t ro l (co n t in u e d )
RM-Y139 Remote Control (SAT-B50 model)
1 MUTING button
Mutes the volume. Press again to restore the
POWER
SAT
MUTING
volume. To operate your TV, you must first set
up the remote control (see page 65).
VTR
TV
1
qa
FUNCTION
TV
TV/VIDEO VTR
TV/VTR
SAT
2 TV/VIDEO button
2
3
4
qs
qd
Switches between the inputs of your TV. To
operate your TV, you must first set up the remote
control (see page 65).
TV/SAT
1 2 3
4 5 6
7 8 9
qf
3 TV/VTR button
Switches between the inputs of your VCR. To
operate your VCR, you must first set up the
remote control (see page 65).
DISPLAY
ENTER
5
6
0
qg
qh
INDEX
CATEGORY
GUIDE
4 TV/SAT button
Switches the output of your Digital Satellite
Receiver between regular TV and satellite
broadcasts. To receive regular TV broadcasts,
you must have a local TV antenna or cable
company connection (see page 9).
qj
qk
ql
JUMP
EXIT
MENU FAVORITE
CH
7
8
VOL
5 DISPLAY button
Opens the program information display for the
current program.
w;
PAGE
9
0
6 INDEX button
CODE SET
RM-Y139
Opens the Station Index.
7 JUMP button
Changes channels to the previously tuned
channel.
SATELLITE
RECEIVER
8 EXIT button
Closes all on-screen displays including program
guides and menus.
z Tip
You may need to set up the remote control to operate your
other audio/ video equipment. See “Setting Up the Remote
Control” on page 65 for details.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
9 VOL buttons
qg GUIDE button
Adjust the volume. To operate your TV, you
Opens the Program Guide.
must first set up the remote control (see page 65).
qh CATEGORY button
Opens the Category Guide.
q; CODE SET button
Lets you program the remote control to operate
your TV and other audio/ video equipment (see
page 65).
qj Arrow and
buttons
The arrow buttons move the highlight in
on-screen displays. The
highlighted item.
button selects the
qa POWER buttons
Turn on and off the Digital Satellite Receiver, TV
and VTR (VCR). To operate your TV or VTR
(VCR), you must first set up the remote control
(see page 65).
qk FAVORITE button
Opens the Favorite Stations guide.
ql MENU button
Opens the Main Menu.
qs FUNCTION buttons
Select the equipment (SAT, TV, VTR) that you
want to operate. The indicators light up to show
which device the remote control is operating. To
operate your TV or VTR (VCR), you must first set
up the remote control (see page 65).
w; CH/PAGE buttons
Change channels. When a program guide is
open, these buttons page through the guide.
qd VCR Control buttons
Operate VCR features such as play, record,
pause, stop, and fast wind. To operate your VTR
(VCR), you must first set up the remote control
(see page 65).
qf 0–9 and ENTER buttons
Change channels directly and enter numerical
values in on-screen displays.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Se le ct in g It e m s
In on-screen displays such as the Main Menu and program guides, you
must first move the highlight to the item you want, then select the item.
RM-Y802 Remote Control (SAT-A50 model)
+
+
1
2
1
2
3
3
4
5
4
5
6
6
7
8
9
7
8
9
0
0
SATELLITE
RECEIVER
SATELLITE
RECEIVER
1 Move the joystick in any
direction to move the
highlight to the item you
want.
2 Press down on the joystick to
select the item.
RM-Y139 Remote Control (SAT-B50 model)
1
2
3
1
2
3
4
5
6
4
5
6
7
9
8
7
8
9
0
0
Note (SAT-B50 model)
Whenever these Operating Instructions
refer to using the joystick, use the arrow
V/ v/ B/ b buttons surrounding the
button.
SATELLITE
RECEIVER
SATELLITE
RECEIVER
1 Press the V/ v/ B/ b buttons
to move the highlight to the
item you want.
2 Press the
button to
select the item.
z Tip
Be sure to press the SAT FUNCTION
button before operating the Digital
Satellite Receiver with the remote control.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Tu rn in g On t h e Po w e r
Press the POWER SAT button to turn on the Digital
Satellite Receiver.
The POWER indicator lights up.
1
POWER
SAT
MUTING
CABLE
TV
FUNCTION
TV
AUDIO
VOLUME CABLE
SAT
+
POWER
SLEEP
TV/SAT TV/VIDEO
SAT
1
4
2
3
6
5
8
0
7
9
DISPLAY
ENTER
Press the TV button to turn on the TV.
2
3
ALT AUDIO
JUMP
FAVORITE INDEX CATEGORY GUIDE
TV
CH
VOL
MENU
EXIT
VTR3 2 DVD AMP
RM-Y802
CODE SET
Select the TV’s input source to w hich you
connected the Digital Satellite Receiver.
Depending on how you connected your Digital Satellite Receiver
to your TV, the input source could be channel 3 or channel 4, or you
may need to use the TV/ VIDEO button to select one of the A/ V
input sources.
SATELLITE
RECEIVER
FUNCTION
TV
TV/VIDEO
3
4
/
/
To make sure you are view ing satellite pictures
Press the SAT FUNCTION button, then press the MENU button to
open the Main Menu.
z Tip
The FUNCTION button indicators light
up to show you which equipment the
remote control is operating.
FUNCTION
SAT
MENU
Note
You may need to set up the remote
control to operate your other audio/
video equipment. See “Setting Up the
Remote Control” on page 65 for details.
If the Main Menu does not appear, turn off your equipment, check
your connections and repeat from step 1.
Press the EXIT button to close the Main Menu.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Ch a n g in g Ch a n n e ls
Press the SAT FUNCTION button.
POWER
1
MUTING
CABLE
TV
SAT
FUNCTION
SAT
FUNCTION
TV
AUDIO
VOLUME CABLE
SAT
+
SLEEP
TV/SAT TV/VIDEO
1
4
2
3
6
Press the CH +/– buttons.
5
8
0
1
2
The Digital Satellite Receiver tunes to the next channel, and the
Station ID and channel number appear in the upper right corner of
your TV screen.
7
9
DISPLAY
ENTER
ALT AUDIO
JUMP
CH
FAVORITE INDEX CATEGORY GUIDE
CH
VOL
MENU
EXIT
You can also change channels by entering the three digit channel
number using the 0–9 buttons, and either pressing the ENTER
button or waiting several seconds.
VTR3 2 DVD AMP
RM-Y802
CODE SET
ENTER
1
2
3
SATELLITE
RECEIVER
The Digital Satellite Receiver tunes to that channel, and the Station
ID and channel number appear in the upper right corner of your
TV screen.
z Tip
You can see information about a
program you are watching by pressing
the DISPLAY button.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Usin g t h e On -Scre e n Disp la ys
Usin g t h e Ma in Me n u
The Main Menu acts as a gateway to all of the features your Digital
Satellite Receiver has to offer.
ALT AUDIO
JUMP
Press the MENU button.
The Main Menu appears.
FAVORITE INDEX CATEGORY GUIDE
1
CH
VOL
MENU
EXIT
MENU
VTR3 2 DVD AMP
RM-Y802
CODE SET
Highlight and select the feature you w ant to
access.
2
SATELLITE
RECEIVER
GUIDES (Page 34)
Access the many guides that help you
find the program you want.
• Alpha List
• Program Guide
PREFERENCES (Page 45)
Adjust the way menus and
information appear.
SYSTEM (Page 22)
Adjust and test your Digital
Satellite Receiver’s settings.
• Antenna
• VCR Control
• System Test
• Category Guide
• Display Options
• Station Index
• Custom Stations
• Data Services
(future application)
• Favorite Stations
• Other Guides
• Aspect Ratio
• Access Card
• Remote Control
(SAT-A50 only)
MESSAGES (Page 52)
Read messages from your
service provider.
LOCKS & LIMITS (Page 53)
Set limits on spending and ratings.
Set locks on stations and pay per
view programs.
AUDIO (Page 64)
Choose a preferred language for the
default audio and current audio for
multiple language programs.
You can also select the Dolby Digital
settings (SAT-A50 only).
PURCHASES (Page 59)
Review the pay per view
program purchases and
cancellations you have made.
TIMER & REC (Page 60)
Schedule program tuning and
recording.
Closing the Main Menu
• Highlight and select EXIT to close the Main Menu (the current program
appears on your screen). You can also press the EXIT button on your
remote control.
• The on-screen displays close automatically after several minutes.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Se t t in g Up Yo u r Dig it a l Sa t e llit e Re ce ive r
(SYSTEM)
Using the System Menu
ALT AUDIO
JUMP
The System Menu provides many ways to adjust your Digital Satellite
Receiver so it matches your preferences and optimizes the conditions of
your home entertainment system.
FAVORITE INDEX CATEGORY GUIDE
CH
VOL
MENU
Press the MENU button, then highlight and select
SYSTEM.
The SYSTEM pop-up appears.
1
EXIT
VTR3 2 DVD AMP
RM-Y802
CODE SET
MENU
SATELLITE
RECEIVER
Highlight and select the item you w ant to set up.
2
Return
Closes the SYSTEM pop-up to
show the Main Menu.
Aspect Ratio
Lets you set the receiver’s output to
match the aspect ratio of your TV
(see page 29).
Antenna
Lets you find the position of the
satellite and helps you get the
strongest signal from your
Satellite Dish Antenna
(see page 23).
Access Card
Lets you initialize a replacement
card (see page 30).
VCR Control
Lets you set up and test your
VCR using the VCR Controller
(see page 25).
Remote Control (SAT-A50 only)
Lets you set up the receiver so the
remote control can operate the
receiver from behind a cabinet or
from another room (see page 31).
System Test
Lets you test the connections
to your Satellite Dish Antenna,
and telephone line
(see page 28).
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the Satellite Dish
Antenna
ALT AUDIO
JUMP
FAVORITE INDEX CATEGORY GUIDE
This display helps you aim your Satellite Dish Antenna to get the
strongest signal.
CH
VOL
MENU
For complete information on installation of your Satellite Dish Antenna,
see the Satellite Dish Antenna Installation/ Operating Instructions.
EXIT
Press the MENU button, then highlight and select
SYSTEM.
The SYSTEM pop-up appears.
1
VTR3 2 DVD AMP
RM-Y802
CODE SET
SATELLITE
RECEIVER
MENU
Highlight and select “Antenna”.
The Antenna display appears.
2
Transponder
Return
Lets you select the transponder
from which the Satellite Dish
Antenna receives its signal.
You do not need to change this
setting unless instructed by
your service provider.
Closes the Antenna display to
show the Main Menu.
Help
Opens information about the
Antenna display.
Antenna Location
Lets you find out the
direction of the satellite
from your location.
Signal Strength Meter
Shows the current and peak
levels of the signal strength.
Highlight and select “Antenna Location”.
The Antenna Location pop-up appears.
3
continued
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Se t t in g Up Yo u r Dig it a l Sa t e llit e Re ce ive r (SYSTEM)
(co n t in u e d )
Select “Zip Code”.
4
The Zip Code pop-up appears.
z Tip
If it is more convenient for you to
enter latitude and longitude, select
“Latitude & Longitude” instead of
“Zip Code”.
Enter your Zip Code, then select “OK”.
5
The azimuth and elevation appear. Use these coordinates to aim
your Satellite Dish Antenna towards the satellite. Refer to your
Satellite Dish Antenna’s Operating/ Installation Instructions for
more details.
OK
M
Closes the pop-up and
saves your changes.
To change
the number
Cancel
Closes the pop-up
without saving the
changes.
m
To move to the
next digit
<
,
You can also use the 0–9 buttons to enter the number. The highlight
moves to the next position automatically.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR Control Feature
ALT AUDIO
JUMP
The VCR Control feature lets the Digital Satellite Receiver control your
VCR using the Timer & Rec feature (see page 60). To use the VCR Control
feature you must connect the VCR Controller or a Sony SmartFile VCR
(see page 11).
FAVORITE INDEX CATEGORY GUIDE
CH
VOL
MENU
Press the MENU button, then highlight and select
SYSTEM.
The SYSTEM pop-up appears.
1
EXIT
VTR3 2 DVD AMP
RM-Y802
CODE SET
MENU
SATELLITE
RECEIVER
Highlight and select “VCR Control”.
The VCR Control display appears.
2
Manufacturer
Lets you select the
manufacturer code for your
VCR (see page 26).
Return
Closes the VCR Control
display to show the Main
Menu.
Help
Auto Title Insert
Opens information about the
VCR Control display.
Lets you turn on the Auto Title
Insert feature (see page 27).
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Se t t in g Up Yo u r Dig it a l Sa t e llit e Re ce ive r (SYSTEM)
(co n t in u e d )
Setting the VCR Manufacturer Code
The VCR Manufacturer Code allows the Digital Satellite Receiver to
control your VCR using the VCR Controller or a Sony SmartFile VCR.
POWER
MUTING
CABLE
TV
SAT
1 Highlight and select “Manufacturer” from the VCR
Control display (see page 25).
FUNCTION
TV
AUDIO
VOLUME CABLE
SAT
+
The Manufacturer pop-up appears.
SLEEP
TV/SAT TV/VIDEO
1
4
2
3
6
5
8
0
7
9
DISPLAY
ENTER
ALT AUDIO
JUMP
2 Highlight and select the manufacturer of your VCR.
FAVORITE INDEX CATEGORY GUIDE
The manufacturer’s pop-up appears.
CH
VOL
MENU
EXIT
VTR3 2 DVD AMP
RM-Y802
CODE SET
3 Select a VCR manufacturer code from the list.
The Test pop-up appears.
Some manufacturers have more than one code to choose from.
If the VCR manufacturer code you select does not work in step 4
below you can select another code for that manufacturer.
SATELLITE
RECEIVER
z Tips
4 Select “Yes” to perform a VCR test.
If you select “Yes”, a pop-up appears giving you instructions on
how to perform a VCR test.
• If you connected a Sony SmartFile
VCR, use the manufacturer code of 99.
• Do not stop or interrupt the VCR test
by pressing any buttons until after the
VCR test is complete.
If the test is unsuccessful, check your connections and the VCR
Controller placement, then repeat this procedure selecting a
different VCR manufacturer code in step 3 (if your VCR
manufacturer has more than one code).
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up Auto Title Insert
The Auto Title Insert feature lets you display information about the
program at the beginning of a Timer & Rec event. The Auto Title Insert
feature displays the program title, program description, total program
time, station logo, station name, channel number, and the program’s
content rating.
POWER
SAT
MUTING
AUDIO
CABLE
TV
FUNCTION
TV
SAT
VOLUME CABLE
+
SLEEP
TV/SAT TV/VIDEO
You can use the Auto Title Insert feature to display this information at the
beginning of a scheduled program.
1
4
2
3
6
1 Highlight and select “Auto Title Insert” from the VCR
Control display (see page 25).
5
8
0
7
9
The Auto Title Insert pop-up appears.
DISPLAY
ENTER
ALT AUDIO
JUMP
FAVORITE INDEX CATEGORY GUIDE
CH
VOL
MENU
EXIT
2 Select “On” or “Off”.
The Auto Title Insert pop-up closes to show the VCR Control
display.
VTR3 2 DVD AMP
RM-Y802
CODE SET
SATELLITE
RECEIVER
Note
When you schedule two or more
consecutive programs, the Auto Title
Insert feature will only appear before the
first program.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Se t t in g Up Yo u r Dig it a l Sa t e llit e Re ce ive r (SYSTEM)
(co n t in u e d )
Performing a System Test
The system test checks your Access Card, telephone line, and Satellite
POWER
MUTING
CABLE
TV
Dish Antenna connections for proper operation.
SAT
FUNCTION
TV
AUDIO
VOLUME CABLE
SAT
+
Press the MENU button, then highlight and select
SYSTEM.
The SYSTEM pop-up appears.
1
SLEEP
TV/SAT TV/VIDEO
1
4
2
3
6
5
8
0
7
9
DISPLAY
ENTER
MENU
ALT AUDIO
JUMP
FAVORITE INDEX CATEGORY GUIDE
CH
VOL
MENU
Highlight and select “System Test”.
The System Test display appears.
2
EXIT
Return
VTR3 2 DVD AMP
RM-Y802
CODE SET
Closes the System Test
display to show the
Main Menu.
Test
Starts the system test.
SATELLITE
RECEIVER
Help
Opens information
about the System Test
display.
Highlight and select “Test”.
3
The system test begins.
If the system test fails, check your connections before calling your
service provider or Sony.
Select “Return”.
The System Test display closes to show the Main Menu.
4
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the Aspect Ratio
The aspect ratio refers to the proportion of your TV screen. Some newer
TVs may offer the 16:9 ratio which is similar to the proportions of a movie
screen. Most TVs use the standard 4:3 ratio.
POWER
SAT
MUTING
AUDIO
CABLE
TV
FUNCTION
TV
SAT
VOLUME CABLE
+
SLEEP
TV/SAT TV/VIDEO
Press the MENU button, then highlight and select
SYSTEM.
The SYSTEM pop-up appears.
1
1
4
2
3
6
5
8
0
7
9
DISPLAY
ENTER
MENU
ALT AUDIO
JUMP
FAVORITE INDEX CATEGORY GUIDE
CH
VOL
MENU
Highlight and select “Aspect Ratio”.
The Aspect Ratio display appears.
2
EXIT
Return
VTR3 2 DVD AMP
RM-Y802
CODE SET
Closes the Aspect Ratio
display to show the
Main Menu.
Help
Opens information
about the Aspect Ratio
display.
SATELLITE
RECEIVER
Highlight and select the aspect ratio of your TV.
The highlight moves to “Return”.
3
Note
To use the Wide aspect ratio feature, you
must receive a 16:9 aspect ratio signal.
Check with your service provider to see if
16:9 programming is available.
Select “Return”.
The Aspect Ratio display closes to show the Main Menu.
4
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Se t t in g Up Yo u r Dig it a l Sa t e llit e Re ce ive r (SYSTEM)
(co n t in u e d )
Replacing Your Access Card
Occasionally your service provider may send you a new Access Card.
POWER
MUTING
CABLE
TV
Use this display to set up your new card. See “Inserting the Access Card”
on page 13 for information about inserting the Access Card into the
Digital Satellite Receiver.
SAT
FUNCTION
TV
AUDIO
SAT
VOLUME CABLE
+
SLEEP
TV/SAT TV/VIDEO
Press the MENU button, then highlight and select
SYSTEM.
The SYSTEM pop-up appears.
1
1
4
2
3
6
5
8
0
7
9
DISPLAY
ENTER
ALT AUDIO
JUMP
MENU
FAVORITE INDEX CATEGORY GUIDE
CH
VOL
MENU
Highlight and select “Access Card” from the
System pop-up.
The Access Card display appears.
EXIT
2
VTR3 2 DVD AMP
RM-Y802
CODE SET
Return
Closes the Access Card
display to show the Main
Menu.
SATELLITE
RECEIVER
OK
Starts the Access Card
replacement process.
Help
Opens information
about the Access Card
display.
Highlight and select “OK”.
The display shows instructions on how to proceed.
3
Follow the instructions in each display to
complete the replacement process.
4
30
Download from Www.Somanuals.com. All Manuals Search And Download.
ALT AUDIO
JUMP
Selecting RF or IR Remote Control
Reception (SAT-A50 only)
FAVORITE INDEX CATEGORY GUIDE
CH
VOL
MENU
The RF feature allows you to operate the Digital Satellite Receiver from
behind a cabinet or from another room within your home. The RF
Antenna must be connected to use the RF feature (see page 12).
EXIT
Press the MENU button, then highlight and select
SYSTEM.
The SYSTEM pop-up appears.
VTR3 2 DVD AMP
RM-Y802
CODE SET
1
SATELLITE
RECEIVER
MENU
Highlight and select “Remote Control”.
The Remote Control display appears.
2
Remote Signal
Return
Lets you select IR or RF as the type
of signal the receiver accepts.
Closes the Remote Control
display to show the Main Menu.
Help
RF Security Control
Opens information about the
Remote Control display.
Lets you change the security code.
RF signals are used to control
many devices. You may need to
change the security code so that
this remote control operates the
Digital Satellite Receiver only.
Highlight and select “Remote Signal”.
The Remote Signal pop-up appears.
3
continued
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Se t t in g Up Yo u r Dig it a l Sa t e llit e Re ce ive r (SYSTEM)
(co n t in u e d )
Highlight and select “RF”.
4
The Remote Signal pop-up closes to show the Remote Control
display.
Highlight and select “Return”.
5
The display closes to show the Main Menu, and the Digital Satellite
Receiver is set to receive RF signals from the remote control.
Setting the Security Code
If the Digital Satellite Receiver is receiving signals from another RF
remote control in your home (or from your neighbor’s home), you can
eliminate this problem by changing the security codes for the Digital
POWER
Satellite Receiver and remote control, or by selecting IR control.
MUTING
CABLE
TV
SAT
Both the Digital Satellite Receiver and the remote control must use the
same three digit security code.
FUNCTION
TV
AUDIO
VOLUME CABLE
+
SLEEP
TV/SAT TV/VIDEO
1 Select “Remote Control” from the SYSTEM pop-up (see
page 31).
1
4
2
3
6
The Remote Control display appears.
5
8
0
7
9
DISPLAY
ENTER
MENU
ALT AUDIO
JUMP
FAVORITE INDEX CATEGORY GUIDE
CH
VOL
MENU
2 Highlight and select “RF Security Code”.
The confirmation pop-up appears.
EXIT
VTR3 2 DVD AMP
RM-Y802
CODE SET
SATELLITE
RECEIVER
32
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Select “Yes”.
The RF Security Code pop-up appears.
4 Select a different security code.
The conformation pop-up appears.
5 Press the CODE SET button on the remote control.
The CABLE and TV FUNCTION indicators flash.
CODE SET
FUNCTION
TV
SAT
CABLE
6 Enter the three digit security code you selected for the
receiver in step 4 above.
7 Press the enter button.
The remote control and Digital Satellite Receiver are now set to a
new security code.
ENTER
8 Select “OK” to save your changes.
The Remote Control display appears.
Note
If the remote control no longer operates
your Digital Satellite Receiver after
completing this procedure, use the
controls on the front panel to open the
Remote Control display (see page 31).
Then repeat the steps in “Setting the
Security Code” to try again.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Vie w in g St a t io n a n d Pro g ra m In fo rm a t io n
(GUIDES)
Using the Guides Menu
ALT AUDIO
JUMP
The Guides Menu helps you find the program you want to watch. You
can choose to see all stations or just a few. You can also create your own
favorite station guides for fast access to your favorite stations.
FAVORITE INDEX CATEGORY GUIDE
CH
VOL
MENU
Press the MENU button, then highlight and select
GUIDES.
The GUIDES Menu appears.
1
EXIT
VTR3 2 DVD AMP
RM-Y802
CODE SET
MENU
SATELLITE
RECEIVER
Highlight and select the guide you w ant to use.
2
Return
Station Index
Closes the GUIDES Menu to
show the Main Menu.
Opens your custom list of
stations as a grid of station logos
(see page 38).
Alpha List
Shows a list of categories
(movies, sports, etc.) and
only the programs that match
the category you select in
Favorite Stations
Opens the Favorite Stations
guide which allows you to create
and access up to four different
sets of stations you enjoy
watching most (see page 39).
alphabetical order (see page 35).
Program Guide
Opens your custom list of
stations and shows program
information for up to three days
in advance (see page 36).
Other Guides
Opens the Other Guides display
which shows a variety of special
categories provided by
DIRECTV. Each category is
divided into subcategories so you
can find exactly the kind of
program you want (see page 42).
Category Guide
Shows a list of categories
(movies, sports, etc.) and only
those stations broadcasting
programs that match the
category you select
(see page 37).
z Tips
• Be sure to press the SAT
FUNCTION button before
operating the Digital
Satellite Receiver with the
remote control.
• You can see information
about a program you are
watching by pressing the
DISPLAY button.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Alpha List
POWER
SAT
MUTING
AUDIO
CABLE
TV
The Alpha List shows program information in the category you select
(such as movies, sports, etc.) in alphabetical order. Program information
is available for up to four hours in advance.
FUNCTION
TV
SAT
VOLUME CABLE
+
SLEEP
TV/SAT TV/VIDEO
Press the MENU button, then highlight and select
GUIDES.
The GUIDES Menu appears.
1
4
2
1
3
6
5
8
0
7
9
DISPLAY
ENTER
ALT AUDIO
JUMP
MENU
FAVORITE INDEX CATEGORY GUIDE
CH
VOL
MENU
Highlight and select “Alpha List”.
The Alpha List guide appears.
2
EXIT
VTR3 2 DVD AMP
RM-Y802
CODE SET
SATELLITE
RECEIVER
Highlight and select a category.
Programs appear in alphabetical order.
3
Highlight and select a program.
4
If you select a current program, the Alpha List guide closes. For
information about selecting a future program see “One Button
Timer & Rec” on page 60.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Vie w in g St a t io n a n d Pro g ra m In fo rm a t io n (GUIDES)
(co n t in u e d )
Using the Program Guide
The Program Guide shows program information for up to three days in
ALT AUDIO
JUMP
advance. You can open the Program Guide using the Main Menu or by
pressing the GUIDE button.
FAVORITE INDEX CATEGORY GUIDE
CH
VOL
MENU
Press the GUIDE button.
1
The Program Guide opens and the current program appears in the
Media Window.
EXIT
VTR3 2 DVD AMP
RM-Y802
CODE SET
GUIDE
SATELLITE
RECEIVER
Highlight the program you w ant.
2
The sound and the picture in the Media Window change as you
highlight different programs.
Skipped stations do not appear (see page 49).
Media Window
Information Area
M
Move the joystick up
and down to highlight
different stations.
Press the CH V/ v
buttons to move the
highlight to the next
page of stations.
List Area
m
Move the joystick right to
highlight future programs.
<
,
Select the program you w ant.
3
z Tip
If you select a current program, the Program Guide closes. For
information about selecting a future program, see “One Button
Timer & Rec” on page 60.
Press the EXIT button to close the
Program Guide and return to the
previous station.
Note
If you select a program and the station is
locked or a limit has been reached, you
can temporarily unlock your Digital
Satellite Receiver using your passcode.
See “Locking Your Receiver” on page 57
for information about the passcode.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Category Guide
The Category Guide shows programs in the category you select (such as
movies, sports, etc.). Program information is available for up to three
days in advance. You can open the Category Guide using the Main Menu
or by pressing the CATEGORY button.
POWER
SAT
MUTING
AUDIO
CABLE
TV
FUNCTION
TV
SAT
VOLUME CABLE
+
SLEEP
TV/SAT TV/VIDEO
Press the CATEGORY button.
1
1
4
2
3
6
The Category Guide opens and the current program appears in the
Media Window.
5
8
0
7
9
DISPLAY
ENTER
CATEGORY
ALT AUDIO
JUMP
FAVORITE INDEX CATEGORY GUIDE
CH
VOL
MENU
Highlight and select the category you w ant.
2
The program list changes each time you select a different category.
EXIT
Skipped stations do not appear (see page 49).
VTR3 2 DVD AMP
RM-Y802
CODE SET
SATELLITE
RECEIVER
Highlight and select the program you w ant.
3
If you select a current program, the Program Guide closes. For
information about selecting a future program, see “One Button
Timer & Rec” on page 60.
z Tip
Press the EXIT button to close the
Category Guide and return to the
previous station.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Vie w in g St a t io n a n d Pro g ra m In fo rm a t io n (GUIDES)
(co n t in u e d )
Using the Station Index
POWER
The Station Index displays each station’s logo and channel number in a
MUTING
CABLE
TV
SAT
grid format. Program information is available for the current time only.
You can open the Station Index using the Main Menu or by pressing the
INDEX button.
FUNCTION
TV
AUDIO
VOLUME CABLE
+
SLEEP
TV/SAT TV/VIDEO
Press the INDEX button.
1
4
2
3
6
1
The Station Index opens and the current program appears in the
5
8
0
Media Window.
7
9
DISPLAY
ENTER
INDEX
ALT AUDIO
JUMP
FAVORITE INDEX CATEGORY GUIDE
CH
VOL
MENU
Highlight the station you w ant.
EXIT
2
The sound and the picture in the Media Window change as you
VTR3 2 DVD AMP
RM-Y802
CODE SET
highlight different stations.
Skipped stations do not appear (see page 49).
SATELLITE
RECEIVER
Select the station you w ant.
3
The Station Index closes and the program broadcast by the station
you selected appears on your TV screen.
z Tip
Press the EXIT button to close the Station
Index and return to the previous station.
To view the current program while
checking the program information of
other stations, turn on the Surf feature
(see page 48).
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Favorite Stations Guide
POWER
SAT
MUTING
AUDIO
The Favorite Stations guide shows four Favorite Titles that you can
customize with eight stations each. Program information is available for
the current time only.
CABLE
TV
FUNCTION
TV
SAT
VOLUME CABLE
+
You can open the Favorite Stations guide using the Main Menu or by
pressing the FAVORITE button.
SLEEP
TV/SAT TV/VIDEO
Before you can use the Favorite Stations guide, you must set up your
favorite stations in a personal guide by following the procedure on the
next page.
1
4
2
3
6
5
8
0
7
9
DISPLAY
ENTER
Press the FAVORITE button.
1
The Favorite Stations guide opens and the current program
ALT AUDIO
JUMP
appears in the Media Window.
FAVORITE INDEX CATEGORY GUIDE
FAVORITE
CH
VOL
MENU
EXIT
VTR3 2 DVD AMP
RM-Y802
CODE SET
Highlight and select the Favorite Title you w ant.
2
The station list in the right half of the display changes as you
highlight different Favorite Titles.
SATELLITE
RECEIVER
Highlight and select the station you w ant.
3
The Favorite Stations guide closes and the program broadcast by
the station you selected appears.
z Tip
Press the EXIT button to close the
Favorite Stations guide and return to the
previous station.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Vie w in g St a t io n a n d Pro g ra m In fo rm a t io n (GUIDES)
(co n t in u e d )
Customizing the Favorite Stations Guide
POWER
1 Highlight and select the Favorite Title you w ant to
MUTING
CABLE
TV
SAT
customize.
The station list appears in the right half of the display.
FUNCTION
TV
AUDIO
VOLUME CABLE
SAT
+
SLEEP
TV/SAT TV/VIDEO
1
4
2
3
6
5
8
0
7
9
DISPLAY
ENTER
2 Highlight and select “Edit”.
ALT AUDIO
JUMP
The Edit pop-up appears.
FAVORITE INDEX CATEGORY GUIDE
CH
VOL
MENU
EXIT
VTR3 2 DVD AMP
RM-Y802
CODE SET
3 Highlight and select “Edit Stations”.
The station index appears in the right half of the display.
SATELLITE
RECEIVER
4 Highlight and select a station in the index.
A checkmark appears in the lower left part of the icon to indicate
that the station is included in the Favorite Title, and the number in
the “Count” box increases by one.
z Tip
Press the EXIT button to close the
Favorite Stations guide and return to the
previous station.
5 Repeat step 4 to add up to eight stations to this Favorite
Title.
Note
When you have added all the stations you want in this Favorite
Title, highlight and select OK.
The “Count” box indicates how many
stations are included in the personal
guide.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing the Title of a Favorite Title
POWER
SAT
1 Highlight and select the Favorite Title you w ant to edit.
MUTING
AUDIO
CABLE
TV
The station list appears in the right half of the display.
FUNCTION
TV
SAT
VOLUME CABLE
+
SLEEP
TV/SAT TV/VIDEO
1
4
2
3
6
5
8
0
7
9
DISPLAY
ENTER
2 Highlight and select “Edit”.
The Edit pop-up appears.
ALT AUDIO
JUMP
FAVORITE INDEX CATEGORY GUIDE
CH
VOL
MENU
EXIT
3 Select “Edit Title” from the pop-up menu.
VTR3 2 DVD AMP
RM-Y802
CODE SET
The Edit Title display appears in the lower left part of the display.
SATELLITE
RECEIVER
4 Enter a seven character title for this Favorite Title.
You can enter upper and lower case letters, numbers, and symbols
in the title.
M
Move the joystick up and
down to select different
characters.
F a v
1
Move the joystick left or right to
highlight different positions. You can
m
<
,
also press
position.
to move to the next
z Tip
Press the EXIT button to close the
Favorite Stations guide and return to the
previous program.
5 When your title is complete, highlight and select “OK”.
The Edit Title pop-up closes to show the Favorite Stations guide.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Vie w in g St a t io n a n d Pro g ra m In fo rm a t io n (GUIDES)
(co n t in u e d )
Using Other Guides
POWER
MUTING
The Other Guides display provides special categories supplied by
CABLE
TV
SAT
DIRECTV. Each category is divided into subcategories to help you find
the exact program you want to watch. Program information is available
for up to three days in advance.
FUNCTION
TV
AUDIO
VOLUME CABLE
SAT
+
SLEEP
TV/SAT TV/VIDEO
Press the MENU button, then highlight and select
GUIDES.
The GUIDES pop-up appears.
1
4
2
3
6
1
5
8
0
7
9
DISPLAY
ENTER
ALT AUDIO
JUMP
MENU
FAVORITE INDEX CATEGORY GUIDE
CH
VOL
MENU
Highlight and select “Other Guides”.
The Other Guides display appears.
2
EXIT
VTR3 2 DVD AMP
RM-Y802
CODE SET
SATELLITE
RECEIVER
Select the Guide Type you w ant.
The available time ranges appear.
3
Select the time range you w ant.
The available categories appear.
4
z Tip
Press the EXIT button to close the Other
Guides display and return to the
previous station.
DIRECTV occasionally changes the
contents of the category and subcategory
lists.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Select the category you w ant.
If the category you select has subcategories, the available
subcategories appear.
5
6
7
Select the subcategory you w ant.
The programs that match your selections appear in the lower half
of the display.
Highlight and select the program you w ant.
If you select a current program, the Other Guides display closes.
For information about selecting a future program, see “One Button
Timer & Rec” on page 60.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Vie w in g St a t io n a n d Pro g ra m In fo rm a t io n (GUIDES)
(co n t in u e d )
View ing Pay Per View Programs
Many programs are available as pay per view. By selecting a pay per view
program you agree to be charged for that program.
Select a pay per view program using any of the
methods described in the “View ing Station and
Program Information (GUIDES)” section on pages
34 through 42.
The Purchase Program display appears. This display shows
detailed information about the program including the cost.
Return
Closes the Purchase Program
display to show the previous
screen.
Purchase
Opens the Purchase pop-up.
Preview
Closes the Purchase Program
display to show a preview of the
program if available.
Times
Opens the Other Show Times
display so you can select another
time to view the program.
Help
Opens information about the
Purchase Program display.
Note
To order pay per view by remote, a
DIRECTV subscription is required and
the Digital Satellite Receiver must be
continuously connected to a land-based
phone line.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Ad ju st in g t h e Disp la ys (PREFERENCES)
Using the Preferences Menu
ALT AUDIO
JUMP
The Preferences Menu lets you change the appearance of the
on-screen displays, the stations you want to appear in the program list
area, and the order in which the stations are listed.
FAVORITE INDEX CATEGORY GUIDE
CH
VOL
MENU
Press the MENU button, then highlight and select
PREFERENCES.
The PREFERENCES Menu appears.
1
EXIT
VTR3 2 DVD AMP
RM-Y802
CODE SET
MENU
SATELLITE
RECEIVER
Highlight and select the item you w ant to adjust.
2
Return
Closes the PREFERENCES Menu to
show the Main Menu.
Custom Stations
Lets you customize which
stations appear in the program
guides (see page 49).
Display Options
Lets you change the color scheme of
the on-screen displays, choose how
the stations are ordered in the guides
and select what is displayed in the
Media Window when surfing
through the Station Index
Data Service
A future application
(see page 51).
(see page 46).
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Ad ju st in g t h e Disp la ys (PREFERENCES) (co n t in u e d )
Setting Display Options
Display Options lets you choose the color scheme of the on-screen
displays and the order in which stations are listed in the program list
ALT AUDIO
JUMP
area. You can also turn the surf option on or off.
FAVORITE INDEX CATEGORY GUIDE
Press the MENU button, then highlight and select
PREFERENCES.
The PREFERENCES Menu appears.
1
CH
VOL
MENU
EXIT
VTR3 2 DVD AMP
RM-Y802
CODE SET
MENU
SATELLITE
RECEIVER
Highlight and select “Display Options”.
The Display Options display appears.
2
Colors
Return
Lets you change the color of the on-
screen displays (see page 47).
Closes the Display Options display
to show the Main Menu.
Station order
Help
Lets you select the order in which
stations appear in the list area
(see page 48).
Opens information about the
Display Options display.
Surf
Lets you view the Current Program
in the Station Index while view
other Program information
(see page 48).
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Color Scheme
POWER
SAT
MUTING
AUDIO
CABLE
TV
1 Highlight and select “Colors” from the Display Options
display (see page 46).
FUNCTION
TV
SAT
VOLUME CABLE
The Colors pop-up appears.
+
SLEEP
TV/SAT TV/VIDEO
1
4
2
3
6
5
8
0
7
9
DISPLAY
ENTER
ALT AUDIO
JUMP
2 Highlight and select the color scheme you like.
FAVORITE INDEX CATEGORY GUIDE
The display changes colors as you highlight each color scheme.
CH
VOL
MENU
EXIT
VTR3 2 DVD AMP
RM-Y802
CODE SET
SATELLITE
RECEIVER
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Ad ju st in g t h e Disp la ys (PREFERENCES) (co n t in u e d )
Changing the Station Order
You can select numerical or alphabetical for the order in which stations
appear in the List Area of the Program Guide, Category Guide and Other
Guides display.
POWER
MUTING
CABLE
TV
SAT
FUNCTION
TV
AUDIO
VOLUME CABLE
SAT
+
1 Highlight and select “Station Order” from the Display
Options display (see page 46).
SLEEP
TV/SAT TV/VIDEO
1
4
2
3
6
The Station Order pop-up appears.
5
8
0
7
9
DISPLAY
ENTER
ALT AUDIO
JUMP
FAVORITE INDEX CATEGORY GUIDE
2 Highlight and select the order you like.
The Station Order pop-up closes to show the Display Options
display.
CH
VOL
MENU
EXIT
VTR3 2 DVD AMP
RM-Y802
CODE SET
SATELLITE
RECEIVER
Changing the Surf Setting
When the Surf setting is On you can view the current program in the
Media Window of the Station Index while viewing the program
information of other programs as you highlight them in the Station Index.
1 Highlight and select “Surf” from the Display Options
display (see page 46).
The Surf pop-up appears.
2 Highlight and select “On” or “Off”.
The Surf pop-up closes to show the Display Options display.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up Custom Stations
ALT AUDIO
JUMP
The Custom Stations display lets you choose which stations will be
skipped in the Program Guide, Category Guide and Station Index, and
when you change channels using the CH +/ – buttons.
You can reduce the number of stations that appear by skipping unwanted
stations.
FAVORITE INDEX CATEGORY GUIDE
CH
VOL
MENU
Press the MENU button, then highlight and select
PREFERENCES.
The PREFERENCES Menu appears.
EXIT
1
VTR3 2 DVD AMP
RM-Y802
CODE SET
MENU
SATELLITE
RECEIVER
Highlight and select “Custom Stations”.
The Custom Stations display appears.
2
Return
Closes the Custom Stations display to
show the Main Menu.
Cancel
Closes the Custom Stations display
and cancels your changes.
Auto
Scans all stations and automatically
skips any stations to which you do not
subscribe.
Clear All
Removes all skip settings.
Help
Opens information about the Custom
Stations display.
“X” Skip Mark
Shows that the station will be skipped
when using the Program Guide,
Category Guide, Station Index, or
when using the CH +/ – buttons.
continued
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Ad ju st in g t h e Disp la ys (PREFERENCES) (co n t in u e d )
Highlight and select a station icon to add or
remove the “X” mark.
The “x” mark indicates that the station will be skipped when you
open the Program Guide, Category Guide or Station Index, or
change channels using the CH +/ – buttons.
3
Highlight and select “Return”.
The Custom Stations display closes to show the Main Menu.
4
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting Data Services
The Data Services feature is reserved for future applications.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Vie w in g Me ssa g e s (MESSAGES)
Your service provider may occasionally send messages to your Digital
Satellite Receiver to inform you of changes to your service and other
special announcements.
ALT AUDIO
JUMP
FAVORITE INDEX CATEGORY GUIDE
Press the MENU button, then highlight and select
MESSAGES.
The Messages display appears.
1
CH
VOL
MENU
EXIT
VTR3 2 DVD AMP
RM-Y802
CODE SET
MENU
SATELLITE
RECEIVER
Highlight and select the message you w ant to
2
read.
The message pop-up appears.
Return
Closes the Messages display to
show the Main Menu.
Delete
Closes the message pop-up and
deletes the message.
Help
Return
Opens information about the
Messages display.
Closes the message pop-up and
saves the message.
Highlight and select “Return” or “Delete”.
The message pop-up closes to show the Messages display.
3
Note
Your receiver can hold a total of between
10 and 20 new and old messages,
depending on the size of the messages.
Your receiver will continue to hold a
message until you delete it or until the AC
Power Cord is disconnected. If your
receiver’s memory is full, you must delete
old messages before you can receive new
ones.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Se t t in g Lo cks a n d Lim it s (LOCKS & LIMITS)
Using the Locks & Limits Display
ALT AUDIO
JUMP
The Locks & Limits feature gives you control over access to your Digital
Satellite Receiver. You can restrict program viewing by cost, ratings, and
station. You can also set a lock to prevent the ordering of pay per view
programs.
FAVORITE INDEX CATEGORY GUIDE
CH
VOL
MENU
Press the MENU button, then highlight and select
LOCKS & LIMITS.
The Locks & Limits display appears.
1
EXIT
VTR3 2 DVD AMP
RM-Y802
CODE SET
MENU
SATELLITE
RECEIVER
Highlight and select “Edit”.
2
The Locks & Limits edit display appears.
The following pages describe how to change the settings for each
of these items.
Spending Limit
Sets a miximum limit on charges per
event (see page 54).
Lock
Opens the passcode pop-up. You
must enter your passcode to lock the
receiver.
Rating Limit
Sets a maximum limit on rated
content (see page 55).
Unlock
Opens the passcode pop-up for
unlocking your receiver.
Pay Per View
Locks or unlocks access to pay per
view programs (see page 55).
Station Locks
Locks or unlocks access to specific
stations (see page 56).
Note
You must lock the receiver before any
locks or limits take effect (see page 57).
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Se t t in g Lo cks a n d Lim it s (LOCKS & LIMITS) (co n t in u e d )
Changing the Spending Limit
The spending limit pop-up lets you limit the amount you can spend per
event on pay per view purchases.
POWER
MUTING
CABLE
TV
SAT
1 Highlight and select “Spending Limit” from the Locks &
Limits edit display (see page 53).
FUNCTION
TV
AUDIO
SAT
VOLUME CABLE
+
SLEEP
TV/SAT TV/VIDEO
The Spending Limit pop-up appears.
1
4
2
3
6
5
8
0
7
9
DISPLAY
ENTER
ALT AUDIO
JUMP
FAVORITE INDEX CATEGORY GUIDE
2 Press the 0–9 buttons to enter the dollar value.
CH
VOL
MENU
You can enter a value of less than $656.
EXIT
6
5
5
VTR3 2 DVD AMP
RM-Y802
CODE SET
SATELLITE
RECEIVER
3 Highlight and select “OK”.
The Spending Limit pop-up closes to show the Locks & Limits edit
display.
Select “Cancel” to close the Spending Limit pop-up without saving
changes.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the Rating Limit
The Rating Limit pop-up lets you limit programs according to the content
rating.
POWER
SAT
MUTING
AUDIO
CABLE
TV
1 Highlight and select “Rating Limit” from the Locks &
Limits edit display (see page 53).
FUNCTION
TV
SAT
VOLUME CABLE
+
The Rating Limit pop-up appears.
SLEEP
TV/SAT TV/VIDEO
1
4
2
3
6
5
8
0
7
9
DISPLAY
ENTER
ALT AUDIO
JUMP
2 Highlight and select the highest content rating you w ant
your Digital Satellite Receiver to access.
The Rating Limit pop-up closes to show the Locks & Limits edit
display.
FAVORITE INDEX CATEGORY GUIDE
CH
VOL
MENU
EXIT
VTR3 2 DVD AMP
RM-Y802
CODE SET
Changing the Pay Per View Lock Setting
The pay per view lock setting lets you lock or unlock access to pay per
view stations.
SATELLITE
RECEIVER
1 Highlight and select “Pay Per View ” from the Locks &
Limits edit display (see page 53).
The Pay Per View Access pop-up appears.
2 Select “Yes” to prevent access to pay per view stations.
Select “No” to allow access to pay per view programs.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Se t t in g Lo cks a n d Lim it s (LOCKS & LIMITS) (co n t in u e d )
Changing the Station Locks Settings
The Stations Locks feature lets you prevent access to specific stations.
POWER
MUTING
CABLE
TV
SAT
1 Highlight and select “Station Locks” from the Locks &
Limits edit display (see page 53).
FUNCTION
TV
AUDIO
VOLUME CABLE
SAT
+
The Station Locks display appears.
SLEEP
TV/SAT TV/VIDEO
1
4
2
3
6
5
8
0
7
9
DISPLAY
ENTER
ALT AUDIO
JUMP
FAVORITE INDEX CATEGORY GUIDE
2 Highlight and select a station icon to change the setting
betw een lock and unlock.
CH
VOL
MENU
The lock symbol appears in the station icon to indicate that the
station is locked.
Return
EXIT
Closes the Station Locks display.
VTR3 2 DVD AMP
RM-Y802
CODE SET
Cancel
Closes the Stations Locks display
without saving your changes.
Lock All
Lock all stations.
SATELLITE
RECEIVER
Clear All
Unlocks all stations.
Help
Opens the help display.
Lock Icon
Shows that this station is locked.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Locking Your Receiver
After you have made the changes you want to the Locks & Limits
settings, you must enter a passcode to lock the receiver.
POWER
SAT
MUTING
AUDIO
CABLE
TV
FUNCTION
TV
SAT
VOLUME CABLE
+
Press the MENU button, then highlight and select
LOCKS & LIMITS.
The Locks & Limits display appears.
SLEEP
TV/SAT TV/VIDEO
1
1
4
2
3
6
5
8
0
7
9
DISPLAY
ENTER
MENU
ALT AUDIO
JUMP
FAVORITE INDEX CATEGORY GUIDE
CH
VOL
MENU
Highlight and select “Edit”, then select “Lock”.
The Lock Receiver pop-up appears.
2
EXIT
VTR3 2 DVD AMP
RM-Y802
CODE SET
SATELLITE
RECEIVER
Enter a four digit passcode using the 0–9 buttons.
3
Each number you enter appears as an asterisk (*) which keeps your
passcode secret.
4
1
2
3
Enter your passcode again.
4
5
This confirms your selection of a passcode number.
z Tip
Do not forget your passcode.
Highlight and select “Return”.
The Main Menu appears.
Your receiver is now locked with your passcode using the locks
and limits you have set.
You will need this number to unlock your
system or make any changes to the locks
or limits you have set. If you forget your
passcode, contact your program provider
for assistance.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Se t t in g Lo cks a n d Lim it s (LOCKS & LIMITS) (co n t in u e d )
Unlocking Your Receiver
If you want to make changes to the Locks & Limits settings, you must
POWER
MUTING
CABLE
TV
enter your passcode to unlock the receiver.
SAT
FUNCTION
TV
AUDIO
VOLUME CABLE
SAT
Press the MENU button, then highlight and select
LOCKS & LIMITS.
The Locks & Limits display appears.
+
1
SLEEP
TV/SAT TV/VIDEO
1
4
2
3
6
5
8
0
7
9
DISPLAY
ENTER
MENU
ALT AUDIO
JUMP
FAVORITE INDEX CATEGORY GUIDE
CH
VOL
MENU
Highlight and select “Edit”.
2
The Unlock Receiver pop-up appears.
EXIT
VTR3 2 DVD AMP
RM-Y802
CODE SET
SATELLITE
RECEIVER
Enter your four digit passcode using the 0–9
button.
Each number you enter appears as an asterisk (*) which keeps your
passcode secret.
3
The Locks & Limits edit display appears.
4
1
2
3
Highlight and select “Unlock”.
4
5
Your receiver is now unlocked.
z Tip
You can temporarily unlock your Digital
Satellite Receiver with your passcode if
you select a program from a guide and the
station is locked or a limit has been
reached.
Highlight and select “Return”.
The Main Menu appears.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Ch e ckin g Pa y Pe r Vie w Pu rch a se s
(PURCHASES)
Checking Your Purchases
ALT AUDIO
JUMP
You can view a history of the pay per view purchases you have made.
This display also shows the future purchases you have ordered and those
that you have canceled.
FAVORITE INDEX CATEGORY GUIDE
CH
VOL
MENU
Press the MENU button, then highlight and select
PURCHASES.
The Purchases display appears.
1
EXIT
VTR3 2 DVD AMP
RM-Y802
CODE SET
MENU
SATELLITE
RECEIVER
Highlight and select the purchase number you
w ant to view .
The information pop-up for that purchase appears.
2
Return
Closes the Purchases display to
show the Main Menu.
Help
Opens information about the
Purchases display.
Cancel PPV
Cancels the Pay Per View
program.
OK
Closes the information pop-up to
show the Purchases display.
Highlight and select “OK”.
The information pop-up closes to show the Purchases display.
z Tip
3
You can use any of the guides to purchase
pay per view programs. See “Viewing
Pay Per View Programs” on page 44.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Sch e d u lin g Pro g ra m s (TIMER & REC)
Using One Button Timer & Rec
You can easily set the timer to view or record programs by selecting
future programs directly from program guides.
To record a future program use the VCR Control feature to turn on your
VCR and start recording automatically. For information on how to set up
the VCR Control feature, see page 25.
Highlight and select a future program using any of
the methods described in “View ing Station and
Program Information (GUIDES)” on pages 34
through 42.
Return
Closes the future
program pop-up to show
the current guide.
Tune to Station
Closes the program guide
to show the current
program of the selected
station.
Once
Add to Timer & Rec
Adds the program to the
Timer & Rec display for
recording, and opens the
schedule pop-up.
Adds the program to the
Timer & Rec display for one
time tuning and/ or recording.
Monday–Friday
Adds the program to the
Timer & Rec display for the
remaining week days of the
current week for tuning and/
or recording.
Add to Timer
Adds the program to the
Timer & Rec display for
tuning, and opens the
schedule pop-up.
Weekly
Adds the program to the
Timer & Rec display for
tuning and/ or recording on
the same day of the following
four weeks.
z Tips
• When using the VCR Control feature to record a
future program, make sure that the VCR is turned
off before the program begins. The VCR Control
feature will turn on your VCR and start recording.
• You can set up the Digital Satellite Receiver to send
program information to your VCR so it records the
information at the beginning of the recording. See
page 27 for information.
Daily
Adds the program to the
Timer & Rec display for
tuning and/ or recording
every day for the next 30 days.
• Your Digital Satellite Receiver has a Program Data
Download feature and will automatically send the
following information when you record a program
with a Sony SmartFile VCR: program title,
program category, program date/ time and
duration.
For further information regarding the SmartFile
function, refer to your Sony SmartFile VCR
Operating Instructions.
• When you schedule two or more continuous
events to be recorded, the Auto Title Insert and
Program Data Download features will only send
information about the first of the recorded
programs.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Timer & Rec Feature
ALT AUDIO
JUMP
The Timer & Rec feature lets you set up the Digital Satellite Receiver to
automatically tune to a program scheduled at a future time. You can also
use the One Button Timer & Rec feature to set up the timer by selecting a
future program.
FAVORITE INDEX CATEGORY GUIDE
CH
VOL
MENU
To record a future program, use the VCR Control feature to turn on your
VCR and start recording automatically. For information on how to set up
the VCR Control feature see page 25.
EXIT
VTR3 2 DVD AMP
RM-Y802
CODE SET
Press the MENU button, then highlight and select
TIMER & REC.
The Timer & Rec display appears.
1
SATELLITE
RECEIVER
MENU
Highlight and select the next available timer event
2
number.
The Date/ Day field is highlighted and the current date appears.
Date and day
Start time
End time
Return
Closes the Timer & Rec display
to show the Main Menu.
Channel number and
station name
Help
Opens information about the
Timer & Rec display.
Program title
Record Event icon
Shows that an event will be
recorded.
z Tip
When using the VCR Control feature to
record a future program, make sure that
your VCR is turned off before the
program begins. The VCR Control
feature will turn on the VCR and start
recording.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Sch e d u lin g Pro g ra m s (TIMER & REC) (co n t in u e d )
Follow the steps below to set the timer.
Move the joystick in the direction indicated in these steps.
3
1 Press V/v to select from
2 Press
to move to
the next
or b 3 Press V/v to
4 Press V/v to
change the
5 Press V/v to
change the ending
hour.
the follow ing.
change the
starting hour.
Then, press
b to move to the
next item.
•
Any date up to 30 days
from the current date
EVERY SUN
EVERY MON
EVERY TUE
EVERY WED
EVERY THU
EVERY FRI
starting minute.
item.
or
Then, press
to move to the
next item.
or b
Then, press
or b
•
•
•
•
•
•
•
•
•
to move to the
next item.
EVERY SAT
MON–FRI
– – / – – / – –
– – – – – –
– – :– – – – – – – :– – – –
– – – – – – –
DAILY
1
8 Press
.
7 Press V/v to select the
6 Press V/v to change the
The Timer & Rec pop-up
appears.
Highlight Timer & Rec or Timer
and press
channel number.
ending minute.
Then, press
or b to
Then, press
or b to
move to the next item.
move to the next item.
.
Highlight and select “Return” to close the TIMER &
REC display.
4
The Main Menu appears.
z Tips
• Shortly before beginning a scheduled
timer event, an information box
appears on your screen. You can press
the EXIT button on your remote control
to cancel the timer event.
• If the Auto Title Insert feature is on (see
page 27), the Auto Title will appear 10
seconds before the scheduled program.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing Timer Events
ALT AUDIO
JUMP
You can easily edit or delete timer events.
FAVORITE INDEX CATEGORY GUIDE
Press the MENU button, then highlight and select
TIMER & REC.
The Timer & Rec display appears.
1
CH
VOL
MENU
EXIT
VTR3 2 DVD AMP
RM-Y802
CODE SET
MENU
SATELLITE
RECEIVER
Highlight and select the number of the event you
w ant to edit.
The edit pop-up appears.
2
Return
Closes the edit pop-up to show the Timer
& Rec display.
Delete
Removes the event from the list. Higher
numbered events move up to fill the gap.
Edit
Closes the edit pop-up to highlight the
date of that event.
See page 62 for instructions on how to
change the timer settings.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Se t t in g Au d io Op t io n s (AUDIO)
Using the Audio Display
ALT AUDIO
JUMP
You can set your Digital Satellite Receiver to play the audio track in the
language you prefer if that language is available. You can set the
language for the current program and as the default language for all
programs when that language is available. You can also set your Digital
Satellite Receiver to receive Dolby Digital audio signals (SAT-A50 only).
FAVORITE INDEX CATEGORY GUIDE
CH
VOL
MENU
Press the MENU button, then highlight and select
AUDIO.
The Audio display appears.
EXIT
1
VTR3 2 DVD AMP
RM-Y802
CODE SET
MENU
SATELLITE
RECEIVER
Highlight and select the setting you w ant to
change.
2
Current Audio
Opens a pop-up that displays the
languages available for the current
program.
Default Audio
Return
Opens a pop-up that displays the eight
available default languages. When a
program broadcasts an audio track in the
default language, that language is
automatically selected.
Closes the Audio display to
show the Main Menu.
Help
Opens information about
the Audio display.
Dolby Digital (SAT-A50 only)
Opens a pop-up that lets you set your
Dolby Digital options.
Choose “Auto Select” (if you have a
Dolby Digital audio system) to enjoy
surround sound whenever a station
broadcasts a Dolby Digital audio track.
Select “Off” if you do not have a Dolby
Digital audio system.
z Tip (SAT-A50 only)
You can also use the ALT AUDIO button on
the remote control to select among the
currently available tracks.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Ot h e r In fo rm a t io n
Se t t in g Up t h e Re m o t e Co n t ro l
The RM-Y139 and RM-Y802 remote controls can be programmed to
operate your other audio/ video equipment.
POWER
SAT
MUTING
CABLE
TV
FUNCTION
TV
AUDIO
Find the code(s) for the manufacturer of the
device you w ant to operate w ith this remote
SAT
VOLUME CABLE
1
+
SLEEP
TV/SAT TV/VIDEO
control.
1
4
2
3
6
You can find these codes on pages 66 and 67.
5
8
0
Press the CODE SET button.
2
7
9
DISPLAY
ENTER
All function indicators begin flashing.
CODE SET
ALT AUDIO
JUMP
FUNCTION
TV
SAT
CABLE
FAVORITE INDEX CATEGORY GUIDE
CH
VOL
MENU
Press the FUNCTION button for the device you
3
w ant to operate w ith this remote control.
The function indicator for only that device begins flashing.
You can set up the RM-Y802 remote control to operate extra
devices by sliding the device switch to VTR3, 2, DVD, or AMP and
pressing the CABLE FUNCTION button.
EXIT
VTR3 2 DVD AMP
RM-Y802
CODE SET
FUNCTION
TV
FUNCTION
CABLE
FUNCTION
TV
FUNCTION
CABLE
/
/
SATELLITE
RECEIVER
Press the 0–9 buttons to input the manufacturer
4
5
code, then press the ENTER button.
The function indicator goes off, and the remote is setup to operate
that device.
ENTER
1
0
1
z Tip
Remember to aim the remote control at
the device you are trying to operate.
Test the remote control.
Press the POWER button for that equipment, then press other
operation controls such as the CH +/ – buttons.
If the device does not respond to the remote control, repeat from
step 2 and enter a different manufacturer code in step 4.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Ma n u fa ct u re r Co d e s
TV Codes
VCR Codes
Manufacturer
Sony
Manufacturer
Code
Code
101
300, 301,302, 303
338
Sony
Aiwa
Admiral (M. Wards)
ABC
102, 114, 109
112
Audio Dynamic
314, 347
330, 343
Bell & Howell
(M. Wards)
Bell & Howell
(M. Wards)
114, 109, 138
Broksonic
Canon
317, 319
Broksonic
Craig
103, 112
309, 308
122, 123, 120, 121
111
Citizen
332
Croslex
Craig
315, 302, 332
304, 338, 309
341, 312, 309
314, 336, 337
304
Curtis Mathis
Daewoo
Daytron
Emerson
Fisher
103, 119, 123
135, 136, 103
113
Curtis Mathis
Daewoo
DBX
122, 113, 120, 121, 123, 103, 115
125
Dimensia
Emerson
Fisher
319, 320, 316, 317, 318, 341
330, 334, 335, 333
338
General Electric
Goldstar
Hitachi
102, 118, 103, 107
103, 113, 112, 130
131, 113, 103, 132
103, 102, 130, 107
128, 129
Funai
General Electric
Go Video
Goldstar
Hitachi
329, 304, 309
322, 339, 340
332
JC Penney
JVC
KTV
133, 113, 103, 123, 134
102, 103 111, 125, 119, 112
111, 112, 113, 107
124, 103, 112
103, 112
306, 304, 305, 338
315
LXI (Sears)
Magnavox
Mitsubishi/ MGA
NEC
HQ
Instant Replay
JC Penney
309, 308
309, 305, 304, 330, 314, 336,
337
Panasonic
Philco
118, 116, 117, 107
111, 118, 109
111
JVC
314, 336, 337
Kenwood
LXI (Sears)
314, 336, 332, 337
Philips
332, 305, 333, 334, 330, 335,
338
Pilot
103
Pioneer
137, 118, 119
103, 108
Magnavox
Marantz
Marta
310, 308, 309
314, 336, 337
332
Portland
Quasar
110, 107
Radio Shack
RCA/ Proscan
Samsung
Sanyo
102, 112, 124, 123
102, 103, 104, 105,106, 107, 108
126, 112, 113, 103
125
Memorex
Minolta
309, 335
305, 304
Mitsubishi/ MGA
Multitech
NEC
323, 324, 325, 326
325, 338, 321
314, 336, 337
309, 308
Scott
123, 112
Sharp
114, 113, 115
114, 109
Olympic
Optimus
Panasonic
Pentax
Signature 2000
(M. Wards)
327
308, 309, 306, 307
305, 304
Sylvania
Symphonic
Tenika
111, 112, 108
123, 139
Philco
308, 309
109
Philips
310, 308, 309
308
Toshiba
Videch
119, 114
Pioneer
131, 103, 112
113, 103, 115, 112
108, 110
Quasar
306, 308, 309
Wards
RCA/ Proscan
304, 305, 308, 309, 310, 311,
312, 313
Zenith
66
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Codes (continued)
AMP (Amplifier)
Codes (SAT-A50 Only)
Manufacturer
Manufacturer
Realistic
Sansui
Code
309, 330, 328, 335, 324, 338
Code
314
Sony
501
Singer
315
Denon (Sharp)
Harmon
JVC
516, 517, 518
519
Samsung
Sanyo
322, 313, 321
330, 335
506, 507, 508
504, 505
520
Scott
312, 313, 321, 335, 323, 324,
325, 326
Kenwood
McIntosh
Onkyo
Sharp
327, 325, 328
315
512, 513
502, 503
509, 510, 511
514, 515
Shintom
Pioneer
Signature 2000
(M. Wards)
336, 327
Technics
Yamaha
Sylvania
Symphonic
Tashiro
Tatung
Teac
310, 308, 309, 338
338
332
Cable Box Codes
(SAT-A50 Only)
Manufacturer
314, 336, 337
314, 336, 338, 337
309, 308
Technics
Teknika
Toshiba
Wards
Code
338, 342
Hamlin/ Regal
222, 223, 224, 225, 228
312, 311
Jerrold/ G.I.
201, 202, 203, 204, 205, 206,
207 208, 218
327, 328, 335, 331, 332
330, 314, 336, 337
331
Oak
227, 228, 229
219, 220, 221
214, 215
Yamaha
Zenith
Panasonic
Pioneer
Scientific Atlanta
Tocom
209, 210, 211
216, 217
DVD Codes (SAT-A50 Only)
Zenith
212
Manufacturer
Code
601
604
605
602
603
Sony
Panasonic
Pioneer
RCA
Toshiba
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Lo ca t io n a n d Fu n ct io n o f Co n t ro ls
Front Panel
2
1
POWER
POWER
TIMER
MESSAGE
GUIDE
MENU
7
6
5
4
3
1 POWER Button
Turns your Digital Satellite Receiver on and off.
5 MESSAGE Indicator
Indicates that you have a new message.
2 Arrow and Buttons
6 TIMER Indicator
The arrow buttons move the highlight in the
Indicates that the Timer is set.
on-screen displays. The
highlighted item.
button selects the
7 POWER Indicator
Indicates whether the Digital Satellite Receiver is
on or off.
3 MENU Button
Opens the Main Menu.
4 GUIDE Button
Opens the Program Guide.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
SAT-A50 Back Panel
2
3
4
5
1
CH3
CH4
ACCESS CARD
RF REMOTE
VIDEO
AUDIO
SATELLITE IN
ATA
LOW SPEED D
VHF/UHF IN
1
2
DIGITAL
OUT
(OPTICAL)
S VIDEO
VHF(SAT)/UHF
OUT
AC IN~
L(MONO)
VIDEO OUT
R
TEL LINE
OL
VCR CONTR
qs qa
q;
9
8
7
6
1 ACCESS CARD slot
7 TEL LINE jack
Do not remove the Access Card unless instructed
Connects the Digital Satellite Receiver to a
to do so by your service provider.
telephone outlet using a telephone line cable.
2 SATELLITE IN jack
8 VHF(SAT)/UHF OUT jack
Outputs audio and video signals to the VHF/
UHF input on your TV or VCR using coaxial
cable.
Inputs satellite signals from your Satellite Dish
Antenna using RG-6 coaxial cable.
3 RF REMOTE jack
Inputs remote control signals using the RF
9 A/V OUTPUT jacks
Antenna.
Output audio and video signals to your TV and
other audio/ video equipment using A/ V cables.
4 CH3/CH4 sw itch
When you use an RF connection (VHF(SAT)/
UHF OUT jack), this setting determines the TV
channel on which programs from the Digital
Satellite Receiver can be viewed.
q; LOW SPEED DATA
For future application.
qa VCR CONTROL jack
Allows the VCR Controller to control a VCR and/
or cable box. Also allows connection of a
monaural cable for use with Sony SmartFile
VCRs.
5 VHF/UHF IN jack
Inputs off-air signals from your local TV off-air
antenna using coaxial cable. Some antennas
require an adapter (not supplied).
qs DIGITAL OUT (OPTICAL)
Outputs digital audio signals to the digital optical
6 AC IN jack
Inputs AC power from a power outlet using the
input of your audio receiver.
AC Power Cord.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Lo ca t io n a n d Fu n ct io n o f Co n t ro ls (co n t in u e d )
SAT-B50 Back Panel
1
2
3
4
CH3
CH4
ACCESS CARD
AUDIO
VIDEO
SATELLITE IN
ATA
VHF/UHF IN
1
2
S VIDEO
LOW SPEED D
VHF(SAT)/UHF
OUT
AC IN~
L(MONO)
R
TEL LINE
OL
VCR CONTR
VIDEO OUT
q;
9
8
7
6
5
1 ACCESS CARD slot
5 AC IN jack
Do not remove the Access Card unless instructed
Inputs AC power from a power outlet using the
to do so by your service provider.
AC Power Cord.
2 SATELLITE IN jack
6 TEL LINE jack
Inputs satellite signals from your Satellite Dish
Connects the Digital Satellite Receiver to a
Antenna using RG-6 coaxial cable.
telephone outlet using a telephone line cable.
3 CH3/CH4 sw itch
7 VHF(SAT)/UHF OUT jack
Outputs audio and video signals to the VHF/
UHF input on your TV or VCR using coaxial
cable.
When you use an RF connection (VHF(SAT)/
UHF OUT jack), this setting determines the TV
channel on which programs from the Digital
Satellite Receiver can be viewed.
8 A/V OUTPUT jacks
Output audio and video signals to your TV and
4 VHF/UHF IN jack
Inputs off-air signals from your local TV off-air
antenna using coaxial cable. Some antennas
require an adapter (not supplied).
other audio/ video equipment using A/ V cables.
9 LOW SPEED DATA
For future application.
q; VCR CONTROL jack
Allows the VCR Controller to control a VCR and/
or cable box. Also allows connection of a
monaural cable for use with Sony SmartFile
VCRs.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Sp e cifica t io n s
Input Jacks
Supplied Accessories
UHF/ VHF IN
75 ohm f-type
Remote Control
RM-Y802 (SAT-A50)
RM-Y139 (SAT-B50)
SATELLITE IN
75 ohm f-type
Size AA Batteries (2)
Access Card (1)
RF REMOTE (SAT-A50)
AC IN (120 V, 60 Hz)
Audio/ Video Cable (1)
Coaxial RF Cable (1)
Telephone Line Cord (1)
AC Power Cord (1)
Output Jacks
S-VIDEO OUT
VIDEO (2)
Cable Type
4-pin mini DIN
RCA type
VCR Controller (1)
OPTICAL OUT (1)
(SAT-A50 only)
Optical Rectangular
S-Video Cable (1) (SAT-A50)
RF Antenna (1) (SAT-A50)
AUDIO R/ L (2)
VHF (SAT)/ UHF
Low-Speed Data
TEL LINE
RCA type
75 ohm f-type
9-pin D-Sub Female
RJ-11
Optional Sony-brand Digital Satellite Receiver
Accessories
Local TV Antenna
ANJ-AA1
VCR CONTROL (1)
VCR Controller (or
monaural cable for
Sony SmartFile VCRs)
Installation Kit
ANJ-DS2
General
Amplifier
Input Frequency
Power Requirements
Power Consumption
Dimensions (w/ h/ d)
950–1450 MHz
120 V, 60 Hz
EAC-DA1
Diplexer
20 W max
EAC-DD1
5
11 ∝ 2
∝ 9 inches
8
Voltage Switch
EAC-DV1
280 ∝ 66.5 ∝ 228.5 mm
Weight
SAT-A50
Set:
6.0 lbs (2.7 kg)
3.6 lbs (1.6 kg)
Unit:
SAT-B50
Set:
5.4 lbs (2.5 kg)
3.4 lbs (1.5 kg)
Unit:
Design and specifications are subject to change without notice.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Tro u b le sh o o t in g
Problem
What you can do
Poor picture quality or no picture
• If you are receiving only a few stations, (only 2 or 3 channels for example), call
your service provider to have your programming activated.
• Some pay per view programs may be protected by Macrovision copy
protection at the discretion of the copyright owner. You may want to connect
the Digital Satellite Receiver directly to your TV.
• Check the connections to your TV and other equipment (see pages 7–13).
• Make sure that your TV and other equipment are set to the input source to
which you connected your Digital Satellite Receiver, for example, channel 3 or
4, Video 1 or 2 (see pages 9–10).
• Check the Satellite Dish Antenna’s signal strength (see page 23).
• Make sure the RG-6 coaxial cable is properly connected to the Satellite Dish
Antenna.
• If the cable distance between the Satellite Dish Antenna and the Digital
Satellite Receiver is more than 100 feet, you must use the Sony Amplifier EAC-
DA1.
• Make sure your Access Card is inserted correctly (see page 13).
• Move any antenna cables that may be directly above your Digital Satellite
Receiver.
• Change the setting of the CH3/ CH4 switch on the back of the Digital Satellite
Receiver. This could improve picture quality only if you are using the UHF/
VHF IN jack of the Digital Satellite Receiver to connect a local TV antenna or
cable company service.
You cannot access a program.
• Make sure you subscribe to the station you are trying to access. Your service
provider can tell you to which stations you subscribe.
• Make sure the station you are trying to access is not set to be skipped (see page
49).
• Make sure the system is not locked (see page 58).
• Use the Program Guide to access the station (see page 36).
• Press the SAT FUNCTION button on the remote control before you select a
channel (see page 20).
You cannot order a pay per view program • Make sure your Digital Satellite Receiver is connected to a telephone line (see
page 8).
• Make sure the system is not locked (see page 58).
• Use the Program Guide to access the station (see page 36).
• If the message “Purchase information not available” appears, you must contact
your service provider to order the program.
• Your Access Card may be full. If so, contact your service provider.
• It may be too late to order the program you want. If so, check for other show
times (see page 44).
You cannot find the station of the pay per • See “Checking Pay Per View Purchases” on page 59 to get information (station,
view program that you ordered
start time, etc.) about programs that you have ordered.
You cannot cancel a pay per view order • You cannot cancel pay per view orders that you have watched. Contact your
service provider for details.
The program highlighted in the Program • Highlight and select the program. Although the program you highlight
Guide does not appear
appears in the Media Window, you must press the
selection (see page 36).
button to complete your
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Problem
What you can do
You cannot see any Favorite Stations
• Set up your personal Favorite Titles before you try to use the Favorite Stations
guide (see page 40).
Locks & Limits feature not working
properly
• Make sure that the Spending, Rating, Pay Per View, and Station Locks are set
as you want them (see page 53). Then, make sure that the system is locked (see
page 57).
You cannot access the Locks & Limits
screens
• The system must be unlocked before you can make changes to the Locks &
Limits (see page 58).
You cannot unlock the system
• Make sure that you entered the passcode correctly. If you have lost or forgotten
your passcode, contact your service provider.
Language of audio track is incorrect or
audio track is not available
• Check the default language setting. The program provider may not broadcast
all of the languages in the Default Audio pop-up (see page 64).
• Some programs may not offer audio tracks.
You cannot record programs with your • Make sure that your VCR is connected correctly (see page 10).
VCR
• If you want to use the VCR Control feature, make sure that the VCR Controller
is connected correctly (see page 11). Also make sure that you have selected the
correct VCR Manufacturer Code (see page 25).
• If you are using the VCR Control feature to record a future program, make sure
that your VCR is turned off before the program begins. The VCR Control
feature will turn on the VCR and start recording.
• Make sure that the program you are trying to record doesn't conflict with any
Locks & Limits you have set.
• If you are trying to record a pay per view program, you must first order the
program (see page 44).
• Some pay per view programs may be protected by Macrovision copy
protection at the discretion of the copyright owner. If so, it may not be possible
to record these programs.
Access Card problems
• Make sure your Access Card is inserted correctly (see page 13).
• Contact your service provider with any other Access Card problems.
Remote control does not work
• Make sure that the batteries are inserted correctly and that the batteries are not
weak (see page 7).
• Remove and then reinsert the batteries without pressing any buttons on the
remote control.
• To operate your TV or other equipment, make sure that the remote control is
set up to operate that equipment (see page 65). If the batteries are removed or
become weak, you may need to set up the remote control to operate other
equipment again.
• Press the FUNCTION button on the remote control of the equipment you want
to operate (SAT, TV, VTR, and/ or CABLE). These buttons will flash to show
which equipment the remote control is set to operate.
• SAT-A50 model only: If there is a problem when using the RF function, check
that the RF Antenna is connected correctly (see page 12).
• SAT-A50 model only: Make sure that the remote control and the Digital
Satellite Receiver are both using the same security code (see page 32).
Audio noise
• SAT-A50 model only: If you connect the DIGITAL OUT jack to equipment that
is not Dolby Digital compatible, set the Dolby Digital option to “off” (see page
64). Not all optical jacks on audio systems are Dolby Digital compatible.
“Frozen” picture or display
• Press both the GUIDE and ARROW DOWN buttons at the same time on the
front panel of the Digital Satellite Receiver to reset the receiver.
If you are unable to resolve problems with your system, see “Customer Support” inside the front cover.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC Re g u la t io n s a n d In fo rm a t io n
Your Digital Satellite Receiver has been registered by the Federal
Communication Commission (FCC) as not being harmful to the
telephone network when connected directly to the telephone lines.
In order to fully comply with the Rules of the FCC, the following
instructions should be read carefully and followed completely
where applicable:
Radio Interference Information
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This
equipment generates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in
a particular installation. If this equipment does cause interference
to radio or television reception (which you can determine by
turning the equipment off and on), you are encouraged to try to
correct the interference by one or more of the following measures:
1
2
3
4
The Federal Communication Commission (FCC) has
established Rules which permit this device to be directly
connected to the telephone network. Standardized jacks are
used for these connections. This equipment should not be used
on party lines or coin phones.
If this device is malfunctioning, it may also be causing harm to
the telephone network; this device should be disconnected
until the source of the problem can be determined and until
repair has been made. If this is not done, the telephone
company may temporarily disconnect service.
•
Reorient or relocate the receiving antenna (the antenna for radio
or television that is receiving the interference)
•
Change the position of the Digital Satellite Receiver with respect
to the radio or television equipment that is receiving the
interference
The telephone company may make changes in its technical
operations and procedures; if such changes affect the
compatibility or use of this device, the telephone company is
required to give adequate notice of the changes. You will be
advised of your right to file a complaint with the FCC.
•
•
Move the Digital Satellite Receiver away from the equipment
that is receiving the interference
Plug the Digital Satellite Receiver into a different outlet so that
the Digital Satellite Receiver and the equipment receiving the
interference are on different branch circuits
If the telephone company requests information on what
equipment is connected to their lines, inform them of:
a. The telephone number to which this unit is connected.
b. The ringer equivalence number.
Shielded cables and I/ O cords must be used for this equipment to
comply with the relevant FCC regulations. Changes or
modifications not expressly approved in writing by Sony
Electronics, Inc., void the user’s authority to operate this
equipment.
c. The USOC jack required.
d. The FCC Registration Number.
5
Items (b) and (d) are indicated on the label. The Ringer
Equivalence Number (REN) is used to determine how many
devices can be connected to your telephone line. In most areas,
the sum of the RENs of all devices on any one line should not
exceed five (5). If too many devices are attached, they may not
ring properly.
If these measures do not eliminate the interference, you should
consult your Digital Satellite Receiver dealer or an experienced
radio/ television technician for additional suggestions. In
addition, you may find the following booklet prepared by the
Federal Communications Commission helpful: “How to Identify
and Resolve Radio-TV Interference Problems.” This booklet is
available from the U.S. Government Printing Office, Washington,
D.C., 20402 Stock No. 004-000-00345-4.
Service Requirements
In the event of equipment malfunction, all repairs should be
performed by our Company or an authorized agent. It is the
responsibility of users requiring service to report the need for
service to our company or to one of our authorized agents. For
service, call 1-800-838-7669.
Declaration of Conformity
Trade Name:
Model No.:
Sony
SAT-A50/ SAT-B50
Responsible Party:Sony Electronics Inc.
Address:
1 Sony Drive, Park Ridge, NJ. 07656 USA
201-930-6973
Telephone No.:
This device complies with Part 15 of the FCC rules. Operation
is subject to the following two conditions: (1) This device may
not cause harmful interference, and (2) this device must accept
any interference received, including interference that may
cause undesired operation.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Lim it e d Wa rra n t y
This warranty is invalid if the factory applied serial number has
been altered or removed from the Product.
Digital Satellite Receivers
SONY ELECTRONICS INC. (“SONY”) warrants this Product
(including any accessories) against defects in material or
workmanship as follows:
Some states do not allow the exclusion or limitation of incidental
or consequential damages, or allow limitations on how long an
implied warranty lasts, so the above limitations or exclusions may
not apply to you. In addition, if you enter into a service contract
with the SONY Partnership within 90 days of the date of sale, the
limitation on how long an implied warranty lasts does not apply
to you. This warranty gives you specific legal rights, and you may
have other rights which vary from state to state.
1
LABOR. For a period of 90 days from the original date of
purchase, if the Product is determined to be defective, SONY
will repair or replace the Product at no charge. After this 90
day period, you must pay for all labor charges.
2
PARTS. For a period of one (1) year from the original date of
purchase, SONY will supply, at no charge, new or rebuilt
replacements in exchange for defective parts. Any
For your convenience, SONYELECTRONICSINC. has established
telephone numbers for frequently asked questions. To locate the
servicer or dealer nearest you, for assistance or resolution of a
service problem, or for product information or operation, call:
replacements will be warranted for the remainder of the
original warranty period or ninety (90) days from installation
by SONY’s authorized facility, whichever is longer.
3
4
ACCESSORIES. Parts and labor for all accessories are for one
(1) year.
SONY SATELLITE SYSTEM INFORMATION CENTER
1-800-838-7669 (Sony)
IN-HOME. For a period of one (1) year from installation date,
if the unit was professionally installed by a SONY authorized
Digital Satellite Receiver Installer and the LNB (Electronic
Antenna Element) fails to function properly, SONY will repair
or replace the LNB with a new or rebuilt part. Labor to repair
or replace the LNB (after 90 days from purchase) will be at
your expense. If no problem is found, or any other item fails, it
will be your responsibility to pay the installer their regular rate
for an in-home service call.
For an accessory or part not available from your authorized dealer,
call:
1-800-488-7669
About Sony Customer Support
Every DIRECTV System manufactured by Sony comes with Sony’s
Express Support at no charge to you. In the event of a system
failure, our Express Support Program can have a replacement
receiver on its way to you via overnight Federal Express (for calls
Monday-Friday until 7:30 pm Eastern Time; Saturday delivery
depends upon zip code). All it takes is a valid credit card to cover
a security deposit, and Sony will pay freight in both directions.
Our Express Support continues with our 800 number, staffed by
dedicated technical representatives who can answer questions on
dealer locations, system operation, installation, hookup,
To obtain warranty service, you must take the Product, or deliver
the Product freight prepaid, in either its original packaging or
packaging affording an equal degree of protection, to a SONY
authorized Digital Satellite Receiver service facility. Please see the
telephone number at the end of this section for a number to call to
locate the closest facility.
This warranty does not cover customer instruction, installation,
setup adjustments or signal reception problems.
accessories, and how to get the most out of your home
entertainment system. Sony’s Express Support program: another
expression of our commitment to excellence in customer service.
This warranty does not cover cosmetic damage or damage due to
acts of God, accident, misuse, abuse, negligence, commercial use,
or modification of, or to any part of the Product, including the
antenna. This warranty does not cover improper installation (if
self-installed), loss of use of the product, or wasted programming
charges due to product malfunction. This warranty does not cover
damage due to improper operation or maintenance, connection to
improper voltage supply, or attempted repair by anyone other
than a facility authorized by SONY to service the Product. This
warranty does not cover Products sold AS IS or WITH ALL
FAULTS. This warranty is valid only in the United States.
Proof of purchase in the form of a bill of sale or receipted invoice
which is evidence that the unit is within the Warranty period must
be presented to obtain warranty service.
REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS
WARRANTY IS THE EXCLUSIVE REMEDY OF THE
CONSUMER. SONY SHALL NOT BE LIABLE FOR ANY
INCIDENTAL OR CONSEQUENTIAL DAMAGES FOR
BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON
THIS PRODUCT. IN NO EVENT SHALL SONY BE LIABLE
FOR ANY INCIDENTAL OR CONSEQUENTIAL DAMAGES
WHATSOEVER ARISING OUT OF THE USE OR INABILITY
TO USE THE PRODUCT. UNDER NO CIRCUMSTANCES
SHALL SONY’S LIABILITY, IF ANY, EXCEED THE
PURCHASE PRICE PAID FOR THE PRODUCT. EXCEPT TO
THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY
IMPLIED WARRANTY OR MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE ON THIS
PRODUCT IS LIMITED IN DURATION TO THE DURATION
OF THIS WARRANTY.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
In d e x
A
D
Access Card, inserting, 13
replacing, 30
slot, 13, 69, 70
Data services, 51
Default language, setting, 64
DIGITAL OUT (OPTICAL) jack, 10, 69
DISPLAY button, 14, 16
Display options, 46
Displays, changing the colors, 47
Dolby Digital, 10, 64
AC Power Cord, connecting, 13
Adjusting the on-screen displays, 46
Alert. See Timer & Rec
ALT AUDIO button, 14
Alpha List, 35
Antenna. See RF antenna, satellite dish antenna, and
local TV off-air antenna.
Arrow buttons, on front panel, 68
on RM-Y139 remote control, 16
Aspect ratio, setting, 29
Audio, display, 64
E
Editing Favorite Stations, 40
Editing Favorite Titles, 41
Editing Locks & Limits, 53
Editing timer events, 63
Elevation, 24
ENTER button, 15, 17
EXIT button, 15, 16
track, 64
Audio system, connecting, 10
AUTO skip feature, 49
Auto Title Insert, 27
F
FAVORITE button, 14, 17, 39
Favorite Stations guide, 39
changing the Favorite Title, 41
setting up, 40
Azimuth, 24
B
Back panel connections, SAT-A50, 69
SAT-B50, 70
FCC regulations, 74
Features, 3
Front panel controls, 68
FUNCTION buttons, 15, 17
Batteries, inserting into remote control, 7
C
Carton contents, 6
CATEGORY button, 14, 16, 37
Category Guide, 37
G
Guides, using, 34
GUIDE button, 15, 17, 36
Guides Menu, 34
CH +/ – buttons, 14
CH/ PAGE buttons, 16
Changing channels, 20
CODE SET button, 14, 17, 65
Codes, Manufacturer, 66, 67
RF security, 32
VCR manufacturer, 26
Colors, setting, 47
Connecting, audio system, 10
local TV off-air antenna, 9
IR Blaster, 11
H
Highlight and Select, 18
I
INDEX button, 14, 16, 38
Information Area, 36
Input source, 9, 10, 19
IR remote control reception, 31
J
RF antenna, 12
TV and VCR, 10
Joystick, 14, 18
Jump button, 15, 16
TV with A/ V connectors, 9
TV with RF connector, 9
Controls, location and function, 68
Custom stations, 49
Customer support, 2
Customizing the Favorite Stations guide, 40
76
Download from Www.Somanuals.com. All Manuals Search And Download.
RF remote control reception, 31
RF security code, setting, 32
RF REMOTE jack, 69
L
Languages, 64
Latitude and longitude, for setting antenna, 24
Limited Warranty, 75
List Area, 36
Local TV off-air antenna, 9
Locking your receiver, 57
Locks and limits, 53
display, 53
S
Satellite Dish Antenna, connecting, 8
setting, 23
SATELLITE IN jack, 8, 69, 70
Scheduling programs, 60
Security code. See RF security code and passcode.
Selecting items, 18
Setting up the receiver, 22
the remote control, 65
Signal Strength meter, 23
Skipping stations, 49
SLEEP button, 14
Specifications, 71
Spending limit, 54
Station and program information, 34
order, 48
Station Index, 38
locking, 57
setting, 54
unlocking, 58
LOW SPEED DATA port, 69, 70
M
Macrovision copy-protection, 2
Manufacturer codes, 66, 67
Mail. See messages.
Main Menu, 21
Media Window, 36
MENU button 15, 17, 21, 68
Messages, 52
Station locks, setting, 56
Surf setting, 48
indicator, 68
S-VIDEO jack, 9, 10, 69, 70
System Menu, 22
System test, performing, 28
viewing, 52
MUTING button, 14, 16
O
T
One Button Timer & Rec, 60
Other Guides, 42
Telephone line, connecting, 8
Testing the system, 28
Timer & Rec, checking and editing, 63
display, 61
P
Passcode, setting, 57
Pay per view, cancelling programs, 59
locking, 55
checking purchases, 59
purchasing programs, 44
POWER buttons, 15, 17, 19
Power indicator, 68
Preferences Menu, 45
Problems, troubleshooting 72
Program Data Download, 11, 60
Program Guide, 36
Program information, 34
Purchases display, 59
setting up, 61
Timer events, 60–63
indicator, 68
Transponder, 23
Troubleshooting, 72
TV, connecting, 9, 10
TV/ SAT button, 15, 16
TV/ VIDEO button, 15, 16
TV/ VTR button, 15, 16
U, V
Unlocking your receiver, 58
VCR Control feature, 11, 25
VCR CONTROL jack, 11, 69, 70
VCR Controller, connecting, 11
VCR, connecting, 10
R
Rating limit, setting, 55
Recording programs, with Timer, 60–63
Reminder. See Timer & Rec.
Remote control, buttons and functions, 14–17
inserting batteries, 7
manufacturer codes, 66, 67
selecting items, 18
setting IR and RF, 31
recording, 25, 60
Viewing pictures, 19
VOL buttons, 14, 17
VTR3/ 2/ DVD/ AMP switch, 15
W, Z
Warranty. See Limited Warranty.
Zip code, for setting antenna, 24
setting up, 65
RF Antenna, connecting, 12
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed in U.S.A.
Download from Www.Somanuals.com. All Manuals Search And Download.
|
