3-275-583-13 (1)
Video Projector
Operating Instructions
VPL-VW200
© 2007 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Disposal of Used Lamp
Trademark Information
This projector’s lamp should be disposed of
properly. Consult your local authorities
regarding safe disposal.
SXRD, “BRAVIA” and
“x.v.Color” are trademarks of Sony
Corporation.
, Motionflow,
The material contained in this lamp are
similar to those of a fluorescent lamp, so you
should dispose of it in the same way.
HDMI, the HDMI logo and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing
LLC.
For customers in Europe
The manufacturer of this product is Sony
Corporation, 1-7-1 Konan Minato-ku
Tokyo, 108-0075 Japan. The Authorized
Representative for EMC and product safety
is Sony Deutschland GmbH, Hedelfinger
Strasse 61, 70327 Stuttgart, Germany. For
any service or guarantee matters please refer
to the addresses given in separate service or
guarantee documents.
“Blu-ray Disc” is a trademark.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
For customers in Canada
This Class B digital apparatus complies with
Canadian ICES-003.
For customers in Europe
Disposal of waste
batteries (applicable
in the European
Disposal of Old Electrical &
Electronic Equipment (Applicable
in the European Union and other
European countries with separate
collection systems)
Union and other
European countries
with separate
collection systems)
This symbol on the battery or on the
packaging indicates that the battery provided
with this product shall not be treated as
household waste.
This symbol on the product or on its
packaging indicates that this product
shall not be treated as household waste.
Instead it shall be handed over to the
applicable collection point for the
recycling of electrical and electronic
equipment. By ensuring this product is
disposed of correctly, you will help
prevent potential negative consequences
for the environment and human health,
which could otherwise be caused by
inappropriate waste handling of this
product. The recycling of materials will
help to conserve natural resources. For
more detailed information about
By ensuring these batteries are disposed of
correctly, you will help prevent potentially
negative consequences for the environment
and human health which could otherwise be
caused by inappropriate waste handling of
the battery. The recycling of the materials
will help to conserve natural resources.
In case of products that for safety,
performance or data integrity reasons
require a permanent connection with an
incorporated battery, this battery should be
replaced by qualified service staff only.
To ensure that the battery will be treated
properly, hand over the product at end-of-
life to the applicable collection point for the
recycling of electrical and electronic
equipment.
recycling of this product, please contact
your local Civic Office, your household
waste disposal service or the shop where
you purchased the product.
For all other batteries, please view the
section on how to remove the battery from
the product safely. Hand the battery over to
the applicable collection point for the
recycling of waste batteries.
For customers in Taiwan only
For more detailed information about
recycling of this product or battery, please
contact your local Civic Office, your
household waste disposal service or the shop
where you purchased the product.
The socket-outlet should be installed near
the equipment and be easily accessible.
CAUTION
RISK OF EXPLOSION IF BATTERY IS
REPLACED BY AN INCORRECT
TYPE.
DISPOSED OF USED BATTERIES
ACCORDING TO THE LOCAL RULES.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting desired adjust menu
Location of Controls
Adjusting the Picture Using Real
Color Processing .............................. 35
Rear/Bottom .......................................9
Remote Control ................................10
Using the Supplied Software to
Connections and
Preparations
Operation through the Menus .......... 37
Screen Menu .................................... 46
Function Menu ................................. 50
Information Menu ............................ 55
Step 1: Installing the Projector .........12
Before Setting Up the
Projector .....................................12
Positioning the Projector and a
screen ..........................................15
Step 2: Connecting the Projector .....18
Connecting to a Computer ..........21
Operating the Projector
Step 3: Adjusting the Picture
Position .............................................22
Accessing the Projector from a
Step 4: Selecting the Menu
Computer ......................................... 56
Language ..........................................26
Checking the Status of the
Projector .......................................... 56
Operating the Projector .................... 57
Setting the Information .................... 57
Projecting the Picture on the
Screen ...............................................28
Selecting the Wide Screen Mode .....30
Selecting the Picture Viewing
Mode ...............................................32
Adjusting the Picture Quality ...........33
Selecting to directly adjust the
desired menu item ......................33
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
About the HDMI Control .................59
About the x.v.Color ......................... 59
Warning Indicators .....................62
Replacing the Lamp and the
Air Filter and cleaning the
Ventilation holes (intake) .................65
Cleaning the Air Filter .....................70
Cleaning and the Screen of the
Projector ...........................................70
Input Signals and Adjustable/
Ceiling Installation ...........................78
When Using the PSS-H10
Projector Suspension Support ....78
Making Fine Adjustments to the
Horizontal Picture Position .............. 82
Index ............................................... 85
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
On safety
• Check that the operating voltage of your
unit is identical with the voltage of your
local power supply.
• Should any liquid or solid object fall into
the cabinet, unplug the unit and have it
checked by qualified personnel before
operating it further.
• Unplug the unit from the wall outlet if it is
not to be used for several days.
• To disconnect the cord, pull it out by the
plug. Never pull the cord itself.
• The wall outlet should be near the unit and
easily accessible.
• The unit is not disconnected to the AC
power source (mains) as long as it is
connected to the wall outlet, even if the
unit itself has been turned off.
• Do not look into the lens while the lamp is
on.
• Do not place your hand or objects near the
ventilation holes. The air coming out is
hot.
On preventing internal heat build-
up
After you turn off the power with the I/1
(ON/STANDBY) switch, do not disconnect
the unit from the wall outlet while the
cooling fan is still running.
Caution
The projector is equipped with ventilation
holes (intake) and ventilation holes
(exhaust). Do not block or place anything
near these holes, or internal heat build-up
may occur, causing picture degradation or
damage to the projector.
On repacking
Save the original shipping carton and
packing material; they will come in handy if
you ever have to ship your unit. For
maximum protection, repack your unit as it
was originally packed at the factory.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Location of Controls
Front/Right Side
You can use the buttons on the control panel with the same names as those on the remote
control to operate the projector.
Press and open the
cover.
ON/STANDBY
indicator
(1 page 22)
LENS button
(1 page 23)
M/m/</,(arrow)/
button (1 page 37)
(enter)
LAMP/COVER
indicator
(1 page 62)
MENU button (1 page 37)
INPUT button (1 page 28)
?/1 (ON/STANDBY) switch (1 page 22)
Note
Ventilation holes
(intake) (1 page 13)
While the ON/STANDBY
indicator lights in orange, the
power saving mode is on.
(1 page 48)
Remote control detector (1 page 22)
- AC IN socket
NETWORK
connector
Connects to a
computer, etc.
for remote
HDMI 1 connector (1 page 19)
HDMI 2 connector (1 page 19)
INPUT A connector (1 page 21)
control.
S VIDEO INPUT connector (mini DIN 4-pin)/VIDEO INPUT
connector (phono type) (1 page 20)
REMOTE
connector
Y PB/CB PR/CR (phono type) (1 page 18)
Connects to a
computer, etc. for
remote control.
(1 page 21)
TRIGGER jack (mini jack)
Outputs a 12 V signal when the power is on.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear/Bottom
Ventilation holes (intake)
(1 page 13)
Top cover (1 page 65)
Ventilationholes(exhaust)
(1 page 13)
Remote control detector
(1 page 22)
Cover release lever
(1 page 65)
Projector suspension
support attachment holes
(1 page 78)
Adjusters (1 page 25)
Filter holder (1 page 68)
Ventilation holes (intake)
(1 page 13)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote Control
Infrared transmitter
switch (1 page 22)
LIGHT button
Illuminates the buttons on
the remote control.
COLOR TEMP button
(1 page 33)
INPUT button
(1 page 28)
BLACK LEVEL button
(1 page 33)
COLOR SPACE button
(1 page 33)
FILM PROJECTION
button (1 page 33)
GAMMA CORRECTION
ADVANCED IRIS button
(1 page 33)
button (1 page 33)
WIDE MODE button
ADJUST PICTURE
button (1 page 34)
(1 page 30)
LENS button
(1 page 23)
RCP (Real Color
Processing) button
(1 page 35)
M/m/</, (arrow)/
buttons
RESET button
(1 page 37)
(1 page 37)
MENU button
(1 page 37)
PICTURE MODE
buttons (1 page 32)
SHARPNESS +/– button
CONTRAST +/– button
(1 page 42)
(1 page 42)
BRIGHTNESS +/– button
(1 page 42)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connections and Preparations
This section describes how to install the projector and screen, how to connect the
equipment from which you want to project the picture, etc.
Unpacking
Check the carton to make sure it contains the following items:
• Remote control (1)
• Air filter cover (1)
• Size AA (R6) batteries (2)
• AC power cord (1)
• ImageDirector3 CD-ROM (1)
• Plug holder
This air filter cover is used only when
the projector is installed on a ceiling.
(1 page 78)
Attach the plug holder to avoid
unplugging the AC power cord
accidentally. (1 page 14)
• Lens cap (1)
When you have purchased the projector,
the lens cap is put onto the lens.
Remove this lens cap when you use the
projector.
• Operating Instructions (this manual)
Inserting the batteries into the remote control
Insert the batteries E side first as shown in the illustration.
Inserting them forcibly or with the polarities reversed may
cause a short circuit and may generate heat.
Push and slide to open.
Caution about handling the remote control
• Handle the remote control with care. Do not drop or step on it, or spill liquid of any kind
onto it.
• Do not place the remote in a location near a heat source, a place subject to direct
sunlight, or a damp room.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1: Installing the Projector
The projector displays pictures output from
a VCR or other device.
The lens shift allows you to have broader
options for placing the projector and
viewing pictures easily.
Installing the projector in such a location
may cause a malfunction of the unit due to
moisture condensation or rise in
temperature.
Near a heat or smoke sensor
Before Setting Up the
Projector
Unsuitable installation
Do not place the projector in the following
situations, which may cause malfunction
or damage to the projector.
Malfunction of the sensor may occur.
Very dusty and extremely smoky
locations
Poorly ventilated location
7
Leave space of more than 20 cm (7 / inches)
around the unit.
Install in a location away from walls
To maintain the performance and
8
Hot and humid
reliability of the projector, allow at
7
least 20 cm (7 / inches) between the
8
projector and walls. Note that the wall
on the rear side of the projector may
become extremely hot.
20 cm
(7 7
/8 inches)
20 cm
(7 7
8 inches)
20 cm
(7 7
8 inches)
Locations subject to direct cool or
warm air from an air-conditioner
/
/
20 cm
(7 7
8 inches)
/
: Exhaust
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Improper use
Do not do any of the following while using
the projector.
Blocking the ventilation holes.
15° or more
Avoid using the projector tilted at an angle
of more than 15 degrees.
Ventilation holes
(exhaust)
Do not install the projector anywhere other
than on a level surface or on the ceiling.
Failing to set this mode when using the
projector at high altitudes may result in
uneven color uniformity and reducing the
reliability of the effects of the lamp.
Ventilationholes
(intake)
When installing the unit at altitudes
When using the projector at an altitude of 1,500
m or higher, set “Cooling Setting” in the Setup
menu to “High” (1 page 48). Failing to
set this mode when using the projector at high
altitudes could have adverse effects, such as
reducing the reliability of certain components.
Tip
For details on the location of the ventilation
holes (intake or exhaust), see “Location of
Controls” on pages 8 to 9.
Tilting front/rear and left/right
15° or more
15° or more
15° or more
15° or more
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting the AC Power Cord
1 Plug the AC power cord into the
AC IN socket (power connector)
of the projector. Then, attach the
plug holder to the AC power
cord.
Plug holder
AC IN socket
AC power cord
2 Slide the plug holder over the
cord until it locks.
To remove the AC power cord
Pull out the AC power cord while pressing
both sides of the lock levers of the plug
holder.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Positioning the Projector and a screen
The installation distance between the projector and a screen varies depending on the size
of the screen.
1 Determine the installation position of the projector and screen.
You can obtain a good quality picture if you position the projector with the center of
the lens within the areas indicated in the gray areas in the illustration. Use the values
a, b and c in the table on page 16 as a guide.
Ceiling installation
Center of the screen
c
c
Center of projector’s
lens
a
b
Floor installation
a: Minimum projection distance between the screen and the center of the projector’s
lens
lens
lens when using the maximum upper vertical lens shift feature.
For installation of the projector on a ceiling, see “Ceiling Installation.” (1 page 78)
For details on the lens shift feature, see “Step 3: Adjusting the Picture Position.”
(1 page 22)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
When using the 16:9 aspect ratio screen
Unit: mm (inches)
Screen
size
(inches)
40
60
80
100
120
150
180
200
250
300
(mm)
1016
1524
2032
2540
3048
3810
4572
5080
6350
7620
a
1212
3
1842
2472
3102
3732
(147)
4677
5622
6252
7827
9402
1
5
3
1
1
3
1
1
(minimum) (47 /4
)
)
)
(72 /8
)
(97 /8
)
(122 /4
)
(184 /4
)
)
(221 /8
)
)
(246 /4
)
)
(308 /4
)
)
(370 /4
)
)
b
2105
3181
1
4257
5
5333
(210)
6409
8023
(315 /8
9637
(379 /2
10713
(421 /8
13403
(527 /8
16093
7
3
7
1
7
5
5
(maximum) (82 /8
(125 /4
)
(167 /8
)
(252 /8
)
(633 /8
c
324
485
1
647
1
809
7
971
1
1213
7
1456
3
1618
3
2022
5
2426
5
7
(12 /8
(19 /8
)
(25 /2
)
(31 /8
)
(38 /4
)
(47 /8
)
(57 /8
)
(63 /4
)
(79 /8
)
(95 /8)
To calculate the installation measurements (SS: Screen Size)
1
15
a (minimum) = 31.5 (1 /4) × SS – 48.2 (1 /16)
1
7
b (maximum) = 53.8 (2 /8) × SS – 46.9 (1 /8)
11
c = 8.0876 ( /32) × SS
When using the 4:3 aspect ratio screen (projecting a 4:3 picture)
Unit: mm (inches)
Screen
size
(inches)
40
60
80
100
120
150
180
200
250
300
(mm)
1016
1524
2032
2540
3048
3810
4572
5080
6350
7620
a
1494
7
2265
3036
3807
(150)
4578
5734
6891
7662
9590
11517
1
5
1
3
3
3
5
1
(minimum) (58 /8
)
(89 /4
)
(119 /8
)
)
(180 /4
)
)
(225 /4
)
(271 /8
)
)
(301 /4
)
)
(377 /8
)
)
(453 /2
)
b
2587
3904
3
5220
(205 /8
6537
7854
(309 /4
9829
(387)
11805
(464 /8
13122
(516 /8
16414
(646 /4
19706
7
5
3
1
7
5
1
7
(maximum) (101 /8
)
(153 /4
)
(257 /8
)
(775 /8
)
c
396
594
1
792
1
990
(39)
1188
7
1485
1
1782
1
1980
(78)
2474
1
2969
(117)
5
(15 /8
)
(23 /2
)
(31 /4
)
(46 /8
)
(58 /2
)
(70 /4
)
(97 /2)
To calculate the installation measurements (SS: Screen Size)
9
15
a (minimum) = 38.551 (1 /16) × SS – 48.2 (1 /16)
5
7
b (maximum) = 65.842 (2 /8) × SS – 46.9 (1 /8)
13
c = 9.8979 ( /32) × SS
16
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Position the projector so that the lens is parallel to the screen.
Top view
Screen
3 Project an image on the screen and adjust the picture so that it fits the
screen. (1 page 22)
To project an image, connect video equipment to the projector. (1 page 18)
Note
When using a screen with an uneven surface, stripes pattern may rarely appear on the screen
depending on the distance between the screen and the projector or the zooming magnifications. This
is not a malfunction of the projector.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Connecting the Projector
When making connections, be sure to do the following:
• Turn off all equipment before making any connections.
• Use the proper cables for each connection.
• Insert the cable plugs properly; poor connection at the plugs may cause a malfunction or
poor picture quality. When pulling out a cable, be sure to pull it out from the plug, not
the cable itself.
• Refer to the operating instructions of the connected equipment.
Connecting to a VCR
To connect to a DVD player/recorder, Blu-ray Disc player or digital tuner
equipped with component video connectors
Speakers
AV amplifier
Right side of the projector
DVDplayer/recorder, HDD
recorder, Blu-ray Disc
player, digital tuner, etc.,
with component video
connectors
Component video cable (not supplied)
: Video signal flow
18
Download from Www.Somanuals.com. All Manuals Search And Download.
To connect to a DVD player/recorder or Blu-ray Disc player
equipped with HDMI output
You can enjoy better picture quality by connecting a DVD player/recorder or Blu-ray Disc
player equipped with HDMI output to the HDMI input of the projector. Moreover, if you
have an HDMI control compatible equipment, you can operate the projector
synchronizing with the HDMI control compatible equipment. For details, see the Function
menu (1 page 50) and “About the HDMI Control” (1 page 59).
AV amplifier
Speakers
Right side of the projector
DVD player/recorder or
Blu-ray Disc player, etc.,
with the HDMI output
to HDMI output
HDMI cable (not supplied)
When using an optional HDMI cable, be sure to use
a cable that has acquired the HDMI logo.
: Video signal flow
Notes
• When connecting equipment to the HDMI input of the projector, be sure to use
equipment that have acquired the HDMI logo.
• When connecting an HDMI cable to the projector, make sure the V mark on the upper
part of the HDMI input of the projector and the V mark on the connector of the cable is
set at the same position.
• If the picture from equipment connected to the projector with an HDMI cable is not
clear, check the settings of the connected equipment.
.............................................................................................................................................................
HDMI Control is an HDMI standard mutual control function which uses the HDMI CEC (Consumer
Electronics Control) specification.
This projector supports DeepColor, x.v.Color, LipSync, and PC Display input of HDMI standards.
It also supports HDCP.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
To connect to a VCR equipped with the S video connector or
video connector
You can connect a DVD player/recorder, hard disk video recorder, VCR or laser disk
player, which is not equipped with component video connectors. See also the instruction
manual of each equipment.
Right side of the projector
AV amplifier
Speakers
Video equipment
to S video or
video output
S video or video cable (not supplied)
: Video signal flow
Tip
If you do not know to which connector you should connect the cable, S VIDEO INPUT (S video
input connector) or VIDEO INPUT (video input connector), connect it to S VIDEO to enjoy better
picture quality.
If the equipment to be connected has no S video connector, connect the cable to the video output.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to a Computer
Right side of the projector
Computer
to monitor output
HD-Dsub15 pin cable (not supplied) or HDMI cable (not supplied)
a cable that has acquired the HDMI logo.
: Video signal flow
Tip
Set “Input-A Signal Sel.” in the Setup
menu to “Auto.” If the input signal does not appear
properly, set it to “Computer.” (1 page 49, 63)
Notes
• When connecting an HDMI cable, make sure the V mark on the upper part of the HDMI
input of the projector and the V mark on the connector of the cable is set at the same
position.
• If you set your computer, such as a notebook type, to output the signal to both
computer’s display and this equipment, the picture of the equipment may not appear
properly. Set your computer to output the signal to only the external monitor.
For details, refer to the computer’s operating instructions supplied with your computer.
For settings of the computer, consult with the manufacturer of the computer.
• If the picture from equipment connected to the projector with an HDMI cable is not
clear, check the settings of the connected equipment.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3: Adjusting the Picture Position
Project an image on the screen and then adjust the picture position.
ON/STANDBY indicator
1
4
2
Remote control detector
5,6,7
Tip
The ?/1 (ON/STANDBY), INPUT, LENS, MENU, and M/m/</,/
(joystick) buttons on the
side panel of the projector function the same as those on the remote control.
Note
Depending on the installation location of the projector, you may not control it with the remote
control. In this case, point the remote control to the screen instead of the projector.
1 Plug the power plug into the wall
outlet.
The ON/STANDBY indicator lights
in red and the projector goes into
Lights in red.
standby mode.
2 Press the ?/1 (ON/STANDBY)
switch to turn on the projector.
The ON/STANDBY indicator flashes
in green, and then lights in green.
Flashes in green for
a few seconds, and
then lights in green.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Turn on the equipment
connected to the projector.
Refer to the operating instructions of
the connected equipment.
4 Press INPUT to project the
picture on the screen.
Each time you press the button, the
input indication and equipment to be
projected change. (1 page 28)
Tips
• You can select the desired language for the menu screen. For details, refer to “Step 4: Selecting
the Menu Language”. (1 page 26)
• When “Auto Input Search” is set to “On” in the Function
menu, the input terminal with
effective signals is automatically displayed by pressing INPUT. (1 page 50)
5 Adjust the vertical picture
position.
Press the LENS button repeatedly until
the Lens Shift adjustment window (test
pattern) appears. Then select the proper
vertical position by pressing the M/m/
</, buttons. Each time you press
the LENS button, the LENS adjustment
window appears in order.
To move the position upward, press
M/,.
To move the position downward,
press m/<.
Tip
When “Lens Control” is set to “Off” on the Installation
picture position. (1 page 52)
menu, you cannot adjust the vertical
menu, the test pattern is not displayed.
When “Test Pattern” is set to “Off” on the Function
(1 page 51)
23
Download from Www.Somanuals.com. All Manuals Search And Download.
The picture moves up by a maximum of 65% of the screen size from the center of the lens.
Side view
120”
1
971 mm (38 / inches)
4
100”
7
809 mm (31 / inches)
8
65%
80”
647 mm (25
1
/
2
inches)
1
screen
height
center of lens
(When using the 16:9 screen. For
more details, see page 16.)
moved upward at the maximum
Tip
You can also adjust the horizontal position of the lens. For detailed information, see “Making Fine
Adjustments to the Horizontal Picture Position” on page 82.
6 Adjust the picture size.
Press the LENS button repeatedly
until the Lens Zoom adjustment
window (test pattern) appears. Then
adjust the size of the picture by
pressing the M/m/</, buttons.
To make the picture larger, press M/,.
To make the picture smaller, press m/<.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
When “Lens Control” is set to “Off” on the Installation
and the focus. (1 page 52)
When “Test Pattern” is set to “Off” on the Function
(1 page 51)
menu, you cannot adjust the picture size
menu, the test pattern is not displayed.
7 Adjust the focus.
Press the LENS button repeatedly
until the Lens Focus adjustment
window (test pattern) appears. Then
adjust the focus of the picture by
pressing the M/m/</, buttons.
To adjust the tilt of the installation surface
If the projector is installed on an uneven surface, use the adjusters to keep the projector
level.
Turn to adjust.
Adjusters
Note
Be careful not to catch your finger when turning the adjusters.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4: Selecting the Menu Language
You can select one of 16 languages for displaying the menu and other on-screen displays.
The factory default setting is English. To change the current menu language, set the
desired language with the menu screen.
2,3,4
1
1 Press MENU.
The menu appears.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Press M/m to select the Setup
menu, and press , or
.
The setting items of the selected menu
appears.
3 Press M/mto select “Language,”
and press , or
.
4 Press M/m/</, to select a
language, and press
.
The menu changes to the selected
language.
To clear the menu
Press MENU.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Projecting
This section describes how to operate the projector to view the picture from the equipment
connected to the projector. It also describes how to adjust the quality of the picture to suit
your taste.
Projecting the Picture on the Screen
1 Power on both the equipment
and the device connected to the
equipment.
2 Press INPUT repeatedly to
select the input you want to
project on the screen.
Display the indication of the input you
want.
Example: To view the picture
from the video
equipment connected
to the VIDEO INPUT
connector.
To view the picture from
Press INPUT to display
Video
Video equipment connected to the VIDEO INPUT connector
Video equipment connected to S VIDEO INPUT connector
S-Video
Component equipment connected to Y PB/CB PR/CR on the projector Component
RGB/component equipment connected to the INPUT A connector
Equipment connected to the HDMI 1 connector
Input-A*
HDMI1**
HDMI2**
Equipment connected to the HDMI 2 connector
*
Set the “Input-A Signal Sel.” setting in the Setup
menu according to the signal input. When
you set it to “Auto,” and cannot display the picture properly, select an appropriate signal
** Make the setting on the equipment connected with HDMI cable according to the HDMI
standards.
The color gradation of the dark area or the bright area may become unclear, or texts may become
faded when a signal other than those from HDMI standard is input. Adjusting the “Brightness”
and the “Contrast”, or adjusting the “Sharpness” in the Picture
menu may improve these
conditions. (1 page 42)
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips
• When “Auto Input Search” is set to “On” in the Function
menu, the input terminal with
effective signals is automatically displayed by pressing INPUT.
• When the “HDMI Control” is set to “On” in the Function
menu, the input terminal with
effective signals is automatically displayed, synchronizing with the operation of the equipment
connected to HDMI 1 or HDMI 2 input of the projector.
Turning Off the Power
1 Press the ?/1 (ON/STANDBY) switch.
A message “POWER OFF?” appears on the screen.
2 Press the ?/1 (ON/STANDBY) switch again before the message
disappears.
The ON/STANDBY indicator flashes in green and the fan continues to run to reduce the
internal heat. First, the ON/STANDBY indicator flashes quickly, during which you will
not be able to light up the ON/STANDBY indicator with the ?/1 (ON/STANDBY)switch.
3 Confirm that the fan stops running and the ON/STANDBY indicator lights
in red.
You can turn off the projector by holding the ?/1 (ON/STANDBY) switch for about one
second, instead of performing the above steps.
Tip
When the projector is connected to an HDMI control compatible equipment, the HDMI control
compatible equipment synchronizes with the operation of the projector. When you turn the power of
the projector off, the power of the HDMI control compatible equipment will also turn off.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Wide Screen Mode
You can enjoy various wide screen modes according to the video signal received.
Press WIDE MODE.
Each time you press the button, you can
select the “Wide Mode” setting.
You can also select it using the menu.
(1 page 46)
WIDE MODE
button
Original image
When the Wide Mode
is operated
Wide Zoom
A 4:3 aspect ratio picture is enlarged over
the entire screen properly. The upper and
lower portions of the screen are slightly
cut off.
Normal
A picture with normal 4:3 aspect ratio is
displayed in the center of the screen to fill
the vertical screen size.
Full
Squeezed
A picture squeezed to 4:3 is displayed
with the correct aspect ratio. A 4:3 picture
is enlarged horizontally to fit the 16:9
screen.
Tip
Squeezed: An original 16:9 aspect ratio picture
is recorded horizontally compressed to a 4:3
picture.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Letterbox picture with side panels
Zoom
A normal 16:9 aspect ratio picture is
enlarged vertically and horizontally in the
same ratio to fill the screen. Use this mode
to view a letterbox picture or a letterbox
picture with side panels.
Letterbox picture
If the subtitle of a movie, etc. is hidden
and cannot be seen, adjust the screen with
“Vertical Size” and “V Center” to display
the subtitle. (1 page 47)
Anamorphic Zoom
A 2.35:1 aspect ratio picture is converted
to a normal 16:9 picture on the screen.
This mode is best suited when using a
commercially available Anamorphic lens
which converts a normal 16:9 aspect ratio
picture to a 2.35:1 picture.
When using an
Anamorphic lens
Full1 (When the PC signal is
input)
Displays a picture on the whole of the
screen without changing the aspect ratio
of the original picture.
Full2 (When the PC signal is
input)
Displays a picture on the whole of the
screen.
Note
You can adjust the vertical position of the picture with “V Center” and “Vertical Size” in the Screen
menu only when “Zoom” is selected. (1 page 47)
Notes on selecting the wide screen mode
The projector is featured with the WIDE MODE. When changing the settings of WIDE
MODE, use caution as described below.
• Select the wide screen mode taking into account that changing the aspect ratio of the
original picture will provide a different look from that of the original image.
• Note that if the projector is used for profit or for public viewing, modifying the original
picture by switching to the wide mode may constitute an infringement of the rights of
authors or producers, which are legally protected.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Picture Viewing Mode
You can select the picture viewing mode that best suits the type of program or room
conditions.
Press one of the
PICTURE MODE buttons
(DYNAMIC, STANDARD,
CINEMA and USER 1, USER 2
and USER 3).
DYNAMIC
Enhances picture contrast and sharpness.
STANDARD
The quality of the picture becomes less
rough than the one selected by
“DYNAMIC”.
PICTURE MODE
buttons
DYNAMIC
STANDARD
CINEMA
USER 1, USER 2
and USER 3
CINEMA
Recommended when viewing a movie in
the dark place.
USER 1, USER 2 and USER 3
You can adjust the quality of the picture to
suit your taste and store the settings into
the selected memory of the projector.
Press one of the USER 1, USER 2 and
USER 3 buttons, then adjust the picture
by using the buttons on the remote control
or the menus (1 pages 33, 41). The
settings are stored, and you can view the
picture with the adjusted picture quality
by pressing the button.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Picture Quality
You can easily adjust the picture quality that suits your taste by selecting the adjustment
items with the remote control. The adjusted data can be stored in each picture mode.
Selecting to directly adjust the desired menu item
COLOR SPACE button
Adjusts the range of color reproduction on the
screen.
Each time you press the button, the setting is
switched either to “Normal” or “Wide” to
change the range of color reproduction on the
screen.
COLOR
SPACE button
COLORTEMP
button
COLOR TEMP button
Each time you press the button, the setting of
the button is changed in the order of “High,”
“Middle,” “Low,” “Custom1,” “Custom2”,
“Custom3”.
BLACK LEVEL
button
FILM
PROJECTION
button
BLACK LEVEL button
ADVANCED
IRIS button
Each time you press the button, the setting of
the button is changed in the order of “High”,
“Low”, “Off”.
GAMMA
CORRECTION
button
FILM PROJECTION button
Each time you press the button, the setting of
“Film Projection” is changed in the order of
“Mode1”, “Mode2”, “Mode3” and “Off”.
ADVANCED IRIS button
Adjusts the desired iris when projecting a
picture.
Each time you press the button, the setting of
the button is changed in the order of “Auto1”,
“Auto2”, “Manual” and “Off”.
GAMMA CORRECTION button
Each time you press the button, the setting of
the button is changed in the order of
“Gamma1”, “Gamma2”, “Gamma3”, and
“Off”.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting desired adjust menu items in the order
1 Press ADJUST PICTURE.
Each time you press the button, the
following adjustment windows are
displayed in sequence.
1
2
For details on each adjustment, see the
Picture
menu. (1 page 41)
Note
Some adjustment windows cannot be
displayed, depending on the type of input
signal. For details, see “Input Signals and
Adjustable/Setting Items” (1 page 76)
2 Make the setting or adjustment
on an item.
Example: To adjust the contrast
When changing the adjustment
level
To increase the value, press ,.
To decrease the value, press <.
When changing the setting
Press M/m to change the setting.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the Picture Using Real Color
Processing
The Real Color Processing (RCP) feature allows you to adjust the color and hue of each
target of the projected picture you specify independently. You can thus obtain a picture
more suitable to your taste.
Tip
Freeze the scene of the video source when you are adjusting the picture using Real Color Processing.
1 Press RCP on the remote
control.
2 Press M/m to select “User1,”
“User2” or “User3,” then press
,.
The RCP (Real Color Processing)
window appears.
1
3 Select the target color you want
to adjust.
Repeat steps 1 and 2 described
below to specify the target color.
2, 3, 4, 5
1 Press M/m to select
“Color Select,” then press </,
to select the color you want to
adjust among “Red,” “Yellow,”
“Green,” “Cyan,” “Blue” and
“Magenta.”
Reference palette
Only the portions that correspond
to the specified color will be
colored and the other portions will
be displayed in black and white.
The reference palette in the RCP
window also shows the adjustable
colors. Select the desired setting to
adjust the color on the projected
image using the reference palette
as a guide.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Press M/m to select “Position” or
“Range,” and specify it more
delicate color position and color
range you want to adjust using
</,.
4 Adjust the color of the specified
portions.
Press M/m to select “RCP Color” or
“RCP Hue,” then adjust the color or
hue of the portions selected in step 3 to
suit your taste using </, while
watching the projected picture. The
picture is returned to normal color
during adjustment.
5 After the adjustment is
complete, press
.
The RCP window disappears and the
picture of step 2 is appeared. Then
after a few seconds, normal picture is
restored.
Tip
There are some limitations on selection of
position and range.
Using the Supplied Software to Adjust the
Picture Quality (ImageDirector3)
By using the “ImageDirector3” (supplied as a CD-ROM), you can make the desired
gamma correction from a computer connected to the projector. Connect the REMOTE or
the NETWORK connector of the projector with a computer and start-up
“ImageDirector3” on the computer.
For details on how to use the “ImageDirector3”, refer to the Help within the CD-ROM.
Notes
• You need to install the “ImageDirector3” on a computer beforehand.
• When connecting the REMOTE connector or the NETWORK connector with a
computer, connect while the power of the computer and the projector are off.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus
This section describes how to make various adjustments and settings using the menus.
Operation through the Menus
settings. Some of the adjustable/setting items are displayed in a pop-up menu, in a setting
menu or adjustment menu with no main menu, or in the next menu window. If you select
an item name followed by an arrow (B), the next menu window with setting items appears.
To change the on-screen menu language, see “Step 4: Selecting the Menu Language.”
(1 page 26)
RESET button
2, 3, 4
1
37
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Press MENU.
The menu window appears.
2 Press M/m to select a menu item,
and press , or
.
The items that can be set or adjusted
with the selected menu appear. The
item presently selected is shown in
yellow.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Press M/m to select an item you
want to set or adjust and press
, or
.
The setting items are displayed in a
pop-up menu, in a setting menu, in an
adjustment menu or in the next menu
window.
Pop-up menu
Setting items
Setting menu
Adjustment menu
Next menu window
Setting items
39
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Make the setting or adjustment
of an item.
To reset the items that have
been adjusted
Select an item in the Menu screen, and
display the pop-up menu, the setting
menu, and the adjustment menu.
Press the RESET on the remote control to
reset only the selected settings to its
factory preset value.
When changing the adjustment
level
To increase the value, press M/,.
To decrease the value, press m/<.
Press
to restore the original screen.
When changing the setting
Note
Press M/m to change the setting.
Press
to restore the original screen.
RESET button on the remote control is
available only when the adjustment menu
or the setting menu is selected.
You can restore the original screen
using < depending on the selected
item.
Items that cannot be adjusted
Adjustable items differ depending on the
input signal. The items that cannot be
adjusted or set do not appear in the menu.
(1 page 76)
To clear the menu
Press MENU.
To reset the picture that has
been adjusted
Select “Reset” from Picture
menu.
When the screen display appears, select
“Yes” using < and press
.
All of the following settings are reset to its
factory preset value.
The settings of “Cinema Black Pro”,
“Motionflow”, “Contrast”, “Brightness”,
“Color”, “Hue”, “Color Temp”,
“Sharpness” and “Expert Setting” on the
Picture
menu
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Menu
The Picture menu is used for adjusting the picture.
Picture Mode
You can select the picture viewing mode that best suits the type of
picture or the environment.
Dynamic: Select this for enhanced picture contrast and sharpness to
reproduce color tones.
Standard: Select this to reduce roughness compared to viewing the
picture with “Dynamic”.
Cinema: Select this for watching movies, etc. in a dark environment.
User1, User2, User3: You can adjust the quality of the picture to suit
your taste and then store the settings. Once the settings are stored, you
can view the picture with the adjusted picture quality by pressing the
PICTURE MODE button on the remote control.
To store the settings
1 Select User1, User2, or User3.
2 Adjust the items you want in the menus.
Tips
• You can also adjust the picture quality in “Dynamic”, “Standard” or
“Cinema”, and store the settings. To reset everything to the factory
settings, select “Reset” from the menu.
• Some items may not be displayed on the Picture menu, depending on
the type of input signal. For details, see “Input Signals and Adjustable/
Setting Items” (1 page 76).
Cinema Black Pro
Advanced Iris
Switches the iris function during projection.
Auto1: Automatically switches to an optimum iris according to a
projected scene. The contrast of the scene is emphasized most.
Auto2: An optimum iris becomes smaller than when set to “Auto1”. The
contrast of the scene becomes reduced.
Sensitivity: If “Auto1” or “Auto2” is selected, either “Recommend”,
“Fast”, or “Slow” can be selected according to the desired response
speed with Sensitivity Mode.
Manual: Manually adjusts the Iris.
Off: Normal contrast.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Motionflow
Film Projection
Reproduces movies in its original moving picture.
Mode1: Best suited for watching movies.
Mode2: Suited for watching movies. The picture is brighter than in
“Mode1”.
Mode3: Suited for watching movies. The picture is brighter than in
“Mode2”.
Off: Normal picture.
Note
When you select “Mode1”or “Mode2”, the picture will become slightly
darker than in “Off”.
Motion Enhancer
Reproduces fast-moving pictures smoothly without generating
afterimages.
High: Select this for picture quality smoother than “Low”.
Low: Select this for smooth picture quality.
Off: Select “Off” when noise, etc. appears in “High” or “Low”. Usually,
set “Motion Enhancer” to “Off”.
Contrast
Adjusts the white area of pictures (white level).
The higher the setting, the greater the contrast. The lower the setting, the
lower the contrast.
You can make adjustments by pressing the CONTRAST+/– on the
remote control.
Brightness
Adjusts the brightness of the picture.
The higher the setting, the brighter the picture. The lower the setting, the
darker the picture.
You can make adjustments by pressing the BRIGHTNESS+/– on the
remote control.
Color
Adjusts the intensity of the color density.
The higher the setting, the greater the intensity. The lower the setting, the
lower the intensity.
Hue
Adjusts the color tone.
The higher the setting, the more greenish the picture becomes. The lower
the setting, the more reddish the picture becomes.
Color Temp.
Adjusts the color temperature.
High: Gives white colors a blue tint.
Middle: Gives a neutral tint between “High” and “Low”.
Low: Gives white colors a red tint.
Custom1, Custom2, Custom3: Enables you to adjust, set, and store
your favorite color temperature.
Sharpness
Sharpens the outline of the picture, or reduces the noise.
The higher the setting, the sharper the picture. The lower the setting, the
softer the picture, thus reducing the noise.
You can make adjustments by pressing the SHARPNESS+/– on the
remote control.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Expert Setting
NR (Noise Reduction)
Reduces the roughness or noise of the picture.
Usually, select “Off”.
If the picture is rough or noisy, select a setting from among “Low”,
“Middle” or “High” according to the input signal source.
DRC Mode
Sets the picture quality to be best suited for the input signal.
Mode 1: Select this for sharp picture from input signal without side
panel information, etc.
Mode 2: Select this for sharp picture from input signal with side panel
information, etc.
Off: Does not convert the input signal to DRC.
Note
Depending on the input signal, the picture quality of “Mode1”and
“Mode2” may not differ.
DRC Palette: You can adjust the “Reality” and “Clarity” of a picture as
desired on the DRC palette when selecting “Mode 1” or “Mode 2”.
To increase the value for “Clarity,” press the , button.
To decrease the value for “Clarity,” press the < button.
To increase the value for “Reality,” press the M button.
To decrease the value for “Reality,” press the m button.
Film Mode
Reproduces 2-3 or 2-2 Pull-Down film sources with smooth picture
movement.
Auto1: Automatically detects the 2-3 or 2-2 Pull-Down format and
performs film conversion. Smooth moving picture is emphasized than
in “Auto2”.
Auto2: Automatically detects the 2-3 or 2-2 Pull-Down format and
performs film conversion.
Off: Does not detect the 2-3 or 2-2 Pull-Down format.
Black Level Adj. (Adjust)
Produces a bolder, dynamic picture.
Set according to the input signal source.
High: Gives higher emphasis to the black color.
Low: Gives lower emphasis to the black color.
Off: Cancels this feature.
Note
Depending on the setting of x.v.Color, this item cannot be set.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Gamma Correction
Adjusts the response characteristics of the tone of the picture.
Select a favorite tone from three options.
Gamma1: Makes a scene a little brighter.
Gamma2: Makes a scene brighter.
Gamma3: Makes a scene darker.
Off: Gamma Correction is “Off”
Using the specified controller, “ImageDirector3” (supplied as a
CD-ROM) allows you to adjust, set, and store a favorite tone in a
computer.
For detailed information on “ImageDirector3”, refer to the Help
provided on the supplied CD-ROM in the computer.
Note
Depending on the setting of x.v.Color, this item cannot be set.
x.v.Color
Set this item when playing back an x.v.Color video signal.
Set this item to “On” when connecting the projector with equipment that
supports x.v.Color and playing back an x.v.Color video signal.
For details on x.v.Color, see “About the x.v.Color” (1 page 59).
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Picture Menu
The Advanced Picture is used for adjusting the picture more.
RCP (Real Color
Processing)
You can adjust the color and hue of each selected portion of the
picture independently.
User1, User2, User3: You can adjust the picture using Real Color
Processing and store the settings. Once the settings are stored, you can
view the picture with the adjusted picture quality.
Off: Cancels this feature.
For details, see “Adjusting the Picture Using Real Color Processing”.
(1 page 35)
Color Space
You can convert the range of color reproduction.
Normal: Converts the color to Hi-Vision color.
Wide: Reproduces more natural color tones in a wider range of color
reproduction, compared to “Normal”.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen Menu
The Screen menu is used to adjust the input signal. You can adjust the size of the picture,
and select wide screen mode, etc.
.
Wide Mode (When the You can set the aspect ratio of the picture to be displayed for the
image input signal is current input signal. This item is enabled only when an image signal
input)
(preset memory numbers 1 to 14) (1 page 73, 74) is input.
Wide Zoom: A 4:3 aspect ratio picture is enlarged over the entire screen
properly. The upper and lower portions of the screen are slightly cut
off.
Normal: A picture with normal 4:3 aspect ratio is displayed in the center
of the screen to fill the vertical screen size.
Full: A picture squeezed to 4:3 is displayed with the correct aspect ratio.
A 4:3 picture is enlarged horizontally to fit the 16:9 screen.
Zoom: A normal 16:9 aspect ratio picture is enlarged vertically and
horizontally in the same ratio to fill the screen.
Anamorphic Zoom: A 2.35:1 aspect ratio picture is converted to a
normal 16:9 picture on the screen. This mode is best suited when
using a commercially available Anamorphic lens which converts a
normal 16:9 aspect ratio picture to a 2.35:1 picture.
Wide Mode (When the You can set the aspect ratio of the picture to be displayed for the
PC signal is input)
current input signal. This item is enabled only when an PC signal is
input.
Full1: Displays a picture on the whole of the screen without changing
the aspect ratio of the original picture.
Full2: Displays a picture on the whole of the screen.
Zoom: A normal 16:9 aspect ratio picture is enlarged vertically and
horizontally in the same ratio to fill the screen.
Over Scan
Hides the outline of the picture.
appears along the edge of the picture.
Off: Projects the whole of the input picture.
Tip
To display the displayable region within the four directions of the screen,
refer to “Blanking” on the Installation
menu (1 page 53).
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen Area
Selects the size of the picture when a Hi-Vision picture is
overscanned.
Full: Expands the picture on the whole of the screen.
Through: Does not expands the picture on the whole of the screen.
Note
This item is effective only when a Hi-Vision signal (preset memory No.
7, 8, 9, 12, 13 and 14) is input and “On” is selected in “Over Scan”.
V Center
Adjust the whole picture by moving up and down on the screen.
As the selected number increases, the screen moves up, and as the
selected number decreases, the screen moves down.
Note
This item is adjustable only when “Zoom” is selected.
Vertical Size
Reduces or enlarges the picture vertically.
The screen is enlarged as the setting increases and reduced as the setting
decreases. If the subtitle of a movie, etc. cannot be seen, use this together
with “V Center”.
Note
This item is adjustable only when “Zoom” is selected.
Adjust Signal
You can adjust the input signal.
APA: Adjusts the position of the image signal automatically for
“Phase”, “Pitch”, and “Shift”.
Phase: Adjusts the dot phase of the panel and the computer signal.
Adjust the picture to the point where it looks clearest.
Pitch: Adjusts the horizontal size of the picture from a computer.
The higher the setting, the wider the picture. The lower the setting, the
narrower the picture. Adjust the setting to match the number of dots of
the input signal.
Shift: Adjusts the position of the picture.
H: As the setting for H (horizontal) increases, the picture moves
to the right, and as the setting decreases, the picture moves to
the left. Use < / , to adjust the horizontal position.
V: As the setting for V (vertical) increases, the picture moves up,
and as the setting decreases, the picture moves down. Use M /
m to adjust the vertical position.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup Menu
The Setup menu is used to change the factory preset settings, etc.
Status
Sets whether or not the on-screen display is displayed.
Set to “Off” to turn off the on-screen displays except for the menus,
message when turning off the power, and warning messages.
Language
Selects the language used in the menu and on-screen displays.
Available languages are: English, Dutch, French, Italian, German,
Spanish, Portuguese, Russian, Swedish, Norwegian, Japanese,
Chinese (Simplified Chinese), Chinese (Traditional Chinese),
Korean, Thai and Arabic.
Cooling Setting
Standby Mode
Power Saving
Use this item when using the projector at high altitudes.
High: Use this setting when using the projector at an altitude of
1,500 m or higher.
Standard: Use this setting when using the projector at normal
altitudes.
Note
When this item is set to “High”, the fan noise becomes slightly
louder since the number of fan rotation increases.
Sets to lower the power consumption in standby.
Standard1: Sets power consumption to normal.
Standard2: Sets the network function ineffective and reduces power
consumption lower than “Standard1”.
Low: Reduces power consumption lower than “Standard2”.
Note
When this item is set to “Low”, the HDMI Control function and the
network function will not operate in standby.
Sets the power saving mode.
When set to “On”, the projector goes into power saving mode if no
signal is input for 10 minutes. At that time, the ON/STANDBY
indicator lights in orange, then the screen becomes dark. In power
saving mode, the power saving mode is cancelled if a signal is input
or any button is pressed. If you do not want to set the projector to
power saving mode, select “Off”.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Input-A Signal Sel.
Selects the type of signal input from the equipment connected to
the INPUT A connector.
Selects the type of signal input from the equipment by selecting
“Input-A” with the INPUT button.
Auto: Selects the input signal type automatically.
Computer: Inputs the signal from a computer.
Video GBR: Inputs the signal from a TV game.
Component: Inputs the component signal from a DVD player/
recorder, Blu-ray Disc player, digital tuner, etc.
Note
When the input signal is not displayed correctly with this item set to
“Auto,” select the item according to the input signal.
Color System
Selects the color system of the input signal.
Auto: Selects the color system of the input signal automatically
from among NTSC3.58, PAL, SECAM, NTSC4.43, PAL-M,
PAL-N, or PAL60.
“NTSC3.58”–“PAL-N”: Allows you to set the color system to the
selected system manually.
Note
Normally, set this to “Auto.” If the picture is distorted or colorless,
select the color system appropriate for the input signal.
Lamp Setting
When replacing the lamps, set the desired lamp setting.
(1 page 69)
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Function Menu
The Function menu is used for changing the settings of the various functions of the
projector.
HDMI Control
Selects the function whether to turn the HDMI Control function
effective, when the HDMI 1 INPUT and HDMI 2 INPUT
connectors are connected to a HDMI control compatible
equipment.
HDMI Control: When set to “On”, the HDMI Control function is
turned effective and the following settings can be assigned.
PJ→HDMI Power Sync: When set to on “On”, the projector is
powered off while the HDMI control compatible equipment
connected to the projector is also powered off at the same time.
HDMI→PJ Power Sync: When set to “On”, the HDMI control
compatible equipment connected to the projector is automatically
powered on or played back, etc., while the projector is also
powered on at the same time.
HDMI Device List: Lists all the HDMI control compatible
equipment connected to the HDMI 1 and HDMI 2 INPUT
connectors of the projector.
Notes
• When “Standby Mode” is set to “Low”, this item will not operate.
• To operate the connected equipment, be sure the equipment is
HDMI control compatible and assign the appropriate settings to
use the HDMI Control function.
For details, see “About the HDMI Control” (1 page 59).
Auto Input Search
Detects the input signal and displays the detected input signal
automatically when the INPUT button is pressed.
When set to “On”, the projector detects whether a Component,
HDMI 1, HDMI 2, Video, S-video or Input-A signal is input when
the input terminal with effective signals is automatically selected by
pressing INPUT. Set this to “Off” when you want to select an input
selector with no input signal, or you want to switch the setting
manually.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Test Pattern
Background
Displays the test pattern.
When set to “On,” a test pattern appears on the screen to be used
when adjusting the lens with “Lens Focus,” “Lens Zoom,” and “Lens
Shift,” or correcting the screen proportions with “V Keystone.” A
test pattern does not appear when this item is set to “Off.”
Tip
While the test pattern is displayed, it is only displayed in green to
allow you to adjust the focus easily.
Selects the background color of the screen when no signal is
input.
You can select “Black” or “Blue”.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Installation Menu
The Installation menu is used for changing the installation settings.
V Keystone
Corrects the vertical trapezoidal distortion of the picture.
When the bottom of the trapezoid is longer than the top (
Sets a lower value (– direction)
When the top of the trapezoid is longer than the bottom (
Sets a higher value (+ direction).
):
):
Note
Depending on the picture position adjusted with the lens shift
feature, the aspect ratio of the picture may change from the original
or picture distortion may occur with V Keystone adjustment.
Image Flip
Flips the picture on the screen horizontally and/or vertically.
Off: The picture does not flip.
HV: Flips the picture horizontally and vertically.
H: Flips the picture horizontally.
V: Flips the picture vertically.
Use this item for installation for the backside projection or ceiling
installation.
Lens Control
Avoids any operation of the lens such as “Lens Focus,” “Lens
Zoom,” and “Lens Shift,” by mistake.
When set to “On,” you can adjust the projection lens using “Lens
Focus,” “Lens Zoom,” and “Lens Shift.” After you make this
adjustment, it is recommended that you set this item to “Off” to
avoid any operation of the lens.
IR Receiver
Illumination
Selects the remote control detectors (IR Receiver) on the front
and rear of the projector.
Front & Rear: Activates both the front and rear detectors.
Front: Activates the front detector only.
Rear: Activates the rear detector only.
Selects whether the illumination on the top panel of the
projector lights when the projector is on.
Turns on the illumination on the top panel of the projector, when set
to “On.” It turns off when set to “Off.”
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Blanking
This feature allows you to adjust the displayable region within
the four directions of the screen.
Select each screen edge “Left / Right / Top / Bottom” on the
Blanking adjustment screen with M / m buttons. Adjust the desired
Blanking value with < / , button.
Note
When both the “Blanking” and the “V Keystone” are adjusted at the
same time, the “Blanking” cannot be adjusted correctly. When using
the “Blanking”, make sure that you set the “V Keystone” to “0”.
Panel Alignment
This feature allows you to adjust the gaps in the color of
characters or the picture.
When set to “On”, the “Adjust Color” and the “Pattern Color” can be
assigned and adjusted.
Adjust Item: Selects how to make adjustments from below.
Shift: Shifts the whole picture and makes adjustments.
Zone: Selects the desired range and makes adjustments.
Adjust Color: Assigns the desired color to adjust the gaps in color.
Select “R” (Red) or “B” (Blue) to make adjustments based on
“G” (Green).
Pattern Color: Select “R/G” (Red and Green) or “R/G/B” (White,
all colors) when the “Adjust Color” is “R” (Red). Select “B/G”
(Blue and Green) or “R/G/B” (White, all colors) when the “Adjust
Color” is “B” (Blue).
Adjust: The shift adjustment and zone adjustment of the color
selected in “Adjust Color” can be made with < / ,, M / m
buttons.
When “Shift” is selected: Assign the settings of the horizontal
direction (H) with < / , buttons and the vertical direction (V)
with M / m buttons on the shift adjustment screen.
When “Zone” is selected: Select the position to adjust with
< / , buttons for the horizontal position (H position) and M / m
buttons for the vertical position (V position), then press
.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Set the amount to adjust with < / , buttons for the horizontal
direction (H direction) and with M / m buttons for the vertical
direction (V direction). You can select the position to adjust again by
pressing
.
Reset: Returns to the factory settings.
Note
Depending on the adjustments made above, colors may become
uneven or the resolution may change.
Network Setting
You can set internet protocols such as IP address, Subnet Mask,
Default Gateway, and DNS Server when accessing the projector
from a computer or using “ImageDirector3”application
supplied.
IP Address Setup
Selects either “Auto (DHCP)” or “Manual.” When you select
“Manual,” set the following “IP Address,” “Subnet Mask,” and
“Default Gateway.” After completing all of settings, select “Apply”
using m button, then press
IP Address
.
Sets the IP Address of the projector.
(1.0.0.0 to 223.255.255.255)
Subnet Mask
Sets the Subnet Mask of the projector.
(1.0.0.0 to 255.255.255.255)
Default Gateway
Sets the Default Gateway of the projector.
(1.0.0.0 to 223.255.255.255)
Primary DNS
Sets the DNS server to be used as a priority.
(1.0.0.0 to 223.255.255.255)
Secondary DNS
Sets the alternative DNS server.
(1.0.0.0 to 223.255.255.255)
MAC Address
Displays MAC address of the projector. You cannot change.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Information Menu
The Information menu displays the model name, serial number, the horizontal and vertical
frequencies of the input signal and the cumulated hours of usage of the lamp.
Model name: VPL-VW200
Serial No.
Memory No.
Signal type
Model Name
Displays the model name (VPL-VW200).
Serial No.
Displays the serial number.
fH (horizontal frequency)
fV (vertical frequency)
Memory No.
Displays the horizontal frequency of the input signal.
Displays the vertical frequency of the input signal.
Displays the preset memory number of the input signal.
Displays the type of the input signal.
Signal type
Lamp Timer
Indicates how long the lamp has been turned on (total usage).
Notes
• fH (horizontal frequency) and fV (vertical frequency) may not be displayed depending
on the equipment connected to the projector.
• You cannot change the displays listed above.
About the Preset Memory No.
This projector has 38 types of preset data for input signals (the preset memory). When the
preset signal is input, the projector automatically detects the signal type and recalls the
data for the signal from the preset memory to adjust it to an optimum picture. The memory
number and signal type of that signal are displayed in the Information
You can also adjust the preset data through the Screen menu.
menu.
This projector also contains 20 different user memories beside the preset memories used
for inputting analog computer signals. You can save input signals that have not been preset
on these user memories.
When an unpreset signal is input for the first time, a memory number is displayed as 0.
When you adjust the data of the signal in the Screen
menu, it will be registered to the
projector. If more than 20 user memories are registered, the newest memory always
overwrites the oldest one.
See the chart on page 73 to find if the signal is registered to the preset memory.
Note
When the aspect ratio of input signal does not match the screen size, a part of the screen is displayed in black.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the Projector from a
Computer
Accessing the
Projector from a
Computer
Checking the Status
of the Projector
Click “Information.” You can check the
information and present status of the
projector on a computer display. You can
check the information and status in the
window, but you cannot change the setting.
You can check the present status of the
projector on a computer display and control
the projector from a computer.
Confirm that the projector and computer are
connected to the router/hub with the LAN
cables, then turn on the projector, computer
and router/hub.
Information
The present status of the projector is
displayed.
Note
1 Start Internet Explorer 5.0 (or
later version) on your computer.
fH (horizontal frequency) and fV (vertical
frequency) may not be displayed
appropriately, depending on the
equipment connected to the projector.
the “Address,” then press the
ENTER key on a keyboard.
Menu
You can check the IP address of the
The present settings of the projector are
displayed.
projector using the Installation
menu.
(1 page 54)
Enter the IP address here.
Tip
When “Standby Mode” in Setup
setting
is set to “Standard1”, you can access the
projector from a computer even if the
projector is in standby mode.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Operating the
Projector
Setting the
Information
Click “Control.” You can perform various
adjustments and settings of the projector on
a computer display.
The functions of the buttons in the windows
are the same as those on the remote control
supplied with the projector.
Click “Setup.” The Password Properties
dialog box appears. The name of the “User”
account is preset without a password to
“root” at the factory. You can set the owner
information, etc. Click “Apply” at the lower
part of each window to update the projector
to the data input in each window.
Settings of the projector are lit.
After you have changed the settings on the
projector, click “Refresh” at the upper right-
hand corner of the window to update the
status. The lighting buttons are changed.
Owner and projector information
Click “OWNER INFORMATION.”
Owner
Enter owner information.
Projector
Enter the location of the projector.
Memo
Enter a memo, if required.
Network settings
Click “NETWORK.”
Internet Protocol (TCP/IP)
Normally, set “Obtain an IP address
automatically (DHCP).” If you select
“Specify an IP address,” set the necessary
items.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting passwords for
“Administrator” and “User”
Click “Password.” You can set passwords
for each “Administrator” and “User.” The
name of the “Administrator” account is
preset to “root” at the factory. It cannot be
changed.
Advanced setting
Click “ADVANCED MENU” to display the
Advertisement button, PJ Talk button,
SNMP button and Reset button. These
settings are mainly for professional use.
Detailed information on Advertisement
button and PJ Talk button are indicated by
the PROTOCOL manual. For details on each
function of “Advanced setting”, consult with
your local dealer or qualified Sony
personnel.
To reset the setting
Click the Reset button displayed in
“Advanced setting”. The data set in “Setup”
are reset to its factory preset value.
Notes
• The data input will be recorded in the
memory of the projector.
• These data may become a personal
information, depending on the content
input. Therefore, it is recommended that
you input content that cannot specify
particular individuals.
• These data may be sent out through the
network by “Advertisement”, “PJTalk”
and “SNMP” functions.
• On disposal or transfer of the projector, it
is strongly recommended that you delete
the data recorded in the memory of the
projector. On how to delete the data, see
“To reset the setting”.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Others
This section describes about the other functions, how to solve the problems, how to
replace the lamp and air filter, etc.
What you can do with the
About the HDMI
Control
HDMI Control
• System Standby
You can power off the projector and the
HDMI control compatible equipment
connected to the projector at the same
time.
What is the HDMI Control?
HDMI Control is an HDMI standard mutual
control function which uses the HDMI CEC
(Consumer Electronics Control)
specification. By connecting a variety of
HDMI control compatible equipment such
as a DVD recorder, an AV amplifier, etc.,
with an HDMI cable, you can operate your
equipment synchronizing with the HDMI
control compatible equipment connected to
the equipment. When using the HDMI
Control function, be sure to assign the
appropriate connection and settings.
• One Touch Play
When the HDMI control compatible
equipment connected to the projector is
played back, the projector is also
automatically powered on, and its input
setting is synchronized at the same time.
Notes
• To operate the connected equipment, be
sure the equipment is HDMI control
compatible and assign the appropriate
settings to use the HDMI Control function.
• Depending on the connected equipment,
the HDMI Control function may not work
appropriately. For the settings of the
connected equipment, refer to the
Connecting a HDMI control
compatible equipment
Connect the projector with an HDMI control
compatible equipment using an HDMI
cable. Be sure to use a cable that has
acquired the HDMI logo for your
connection.
operating instructions of the equipment.
About the x.v.Color
Note
The HDMI Control function is available
only between Sony HDMI control
compatible equipment.
• x.v.Color is a more familiar term for the
xvYCC standard proposed by Sony, and is
a trademark of Sony.
• xvYCC is an international standard for
color space in video. This standard can
express a wider color range than the
currently used broadcast standard.
Setting the HDMI Control
Be sure to assign the appropriate
connections for both the projector and the
HDMI control compatible equipment
connected to the projector. For settings of
the projector, see 1 page 50. For settings of
the HDMI equipment connected to the
projector, refer to its operational
instructions.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If the projector appears to be operating erratically, try to diagnose and correct the problem
using the following instructions. If the problem persists, consult with qualified Sony
personnel.
Power
Symptom
Cause and Remedy
The power is not turned on. c After about one minute, turn the power on.
c Close the lamp cover securely, then tighten the screws securely.
(1 page 67)
c Close the filter holder securely. (1 page 69)
c Check warning indicators. (1 page 62)
Picture
Symptom
Cause and Remedy
No picture.
c Check that the proper connections have been made.
(1 page 18)
(1 page 28)
c Set the computer signal to output from an external monitor.
c Set the computer signal to output only to an external monitor.
Signal Sel.” on the Setup
menu according to the input
signal. (1 page 49)
The picture from the
INPUT A connector is
colored strange.
Signal Sel.” on the Setup
menu according to the input
signal. (1 page 49)
The picture from the
VIDEO INPUT or
S VIDEO INPUT
connector is colored
strange.
c Adjust the picture of the Picture
menu. (1 page 41)
menu to match the color
c Set “Color System” in the Setup
system being input. (1 page 49)
The color gradation of the
dark area or the bright area
of the picture from the
HDMI 1 or HDMI 2
connector becomes
unclear.
c The color gradation of the dark area or the bright area may
become unclear when a signal other than those from HDMI
the Picture
menu. (1 page 42)
The picture is too dark.
c Adjust the “Contrast” or “Brightness” of the Picture
properly. (1 page 42)
menu
The picture is not clear.
c Adjust the focus. (1 page 25)
c Condensation has accumulated on the lens. Leave the projector
for about two hours with the power on.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Cause and Remedy
The picture flickers.
c Activate “APA”, then adjust the current input signal.
c Adjust “Phase” for “Adjust Signal” in the Screen
properly. (1 page 47)
menu
The color of characters or
the picture is not
appropriate.
c Select the desired color registration in “Panel Alignment” of
Installation
menu (1 page 53).
On-screen display
Symptom
Cause and Remedy
On-screen display does not
appear.
c Set “Status” in the Setup
menu to “On.” (1 page 48)
c Check if the ?/1 (ON/STANDBY) indicator should light in
green.
The model name does not
disappear from the screen.
c The display mode of the projector may be set at the time of
purchase. Consult with your local dealer or qualified Sony
personnel.
Remote control
Symptom
Cause and Remedy
The remote control does
not work.
c Batteries could be weak. Replace them with new batteries.
(1 page 11)
c Insert the batteries with the correct polarities. (1 page 11)
c In the Installation
menu, set the setting of “IR Receiver” to
“Front & Rear”. (1 page 52)
c If there is a fluorescent lamp near the remote control detector, the
projector may work improperly or inadvertently. Change the
setting of “IR Receiver” in the Installation
menu. (1 page 52)
Others
Symptom
Cause and Remedy
The fan is noisy.
c Check the setting of “Cooling Setting” in the Setup
(1 page 48)
c Make sure that the room temperature is not too high.
c Check the installation conditions. (1 page 12)
menu.
The number of fan rotation increases to maintain the product
reliability of the projector’s components in a room, where the
temperature is higher than normal. The fan noise becomes
slightly louder. The approximate normal temperature is 25°C.
Image is left on the screen.
(image retention)
c When High contrast non-moving images are displayed for a
long period of time, there may be some image retention on the
screen. This is only a temporary condition. Turning off the
power for a while will eliminate the retained image.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning Indicators
The ON/STANDBY or LAMP/COVER indicator lights up or flashes if there is any
trouble with your projector.
ON/STANDBY indicator
LAMP/COVER indicator
Symptom
Cause and Remedy
LAMP/COVER flashes in
red. (A repetition rate of 2
flashes)
c Close the lamp cover securely, then tighten the screws securely.
(1 page 67)
c Close the filter holder securely. (1 page 69)
LAMP/COVER flashes in
red. (A repetition rate of 3
flashes)
c The lamp has reached the end of its useful lifespan. Replace the
lamp. (1 page 65)
c The lamp has reached a high temperature. Wait until the lamp
cools, and then turn on the power again.
ON/STANDBY flashes in
red. (A repetition rate of 4
flashes)
c The fan is broken. Consult with qualified Sony personnel.
ON/STANDBY flashes in
red. (A repetition rate of 2
flashes)
c The internal temperature is unusually high. Check to ensure that
if nothing is blocking the ventilation holes or whether or not the
projector is being used at high altitudes.
ON/STANDBY flashes in
red. (A repetition rate of 6
flashes)
c Press the I/1 (ON/STANDBY) switch to turn on the projector. If
the power is not turned on, disconnect the AC power cord, then
confirm the ON/STANDBY lamp is turned off. After about 10
seconds, reconnect the AC power cord and turn on the power
again. If the indicators still light up, the electrical system has a
problem. Consult with qualified Sony personnel.
Note
When a warning indicator other than the above starts flashing, and the symptom persists even after
carrying out the above methods, consult with qualified Sony personnel.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Message Lists
Warning messages
Message
Cause and Remedy
High temp.! Lamp off in 1
min.
c Turn off the power.
c Check to ensure that nothing is blocking the ventilation holes.
Frequency is out of range!
c Frequency is out of range. Input a signal that is within the
acceptable frequency range of the projector.
Please check Input-A
Signal Sel.
c Set “Input-A Signal Sel.” in the Setup
menu to
“Computer” when an RGB signal is input from a computer.
(1 page 49)
Please replace the Lamp/
Filter.
c The remaining available usage time for the lamp and the air
filter is short. (Estimated approximately 50 hours.)
Lamp/Filter life remains
less than 50H.
Note
To clear the message on the screen, press any key on the remote
control or the control panel of the projector once.
Please replace the Lamp/
Filter.
c The remaining available usage time for the lamp and the air
filter is short. (Estimated approximately 15 hours.)
Lamp/Filter life remains
less than 15H.
Note
To clear the message on the screen, press any key on the remote
control or the control panel of the projector once.
Please replace the Lamp/
Filter.
End of Lamp/Filter life.
Lamp off in 1 min.
c It is time to replace the lamp. Replace the lamp. (1 page 65)
c Also, replace the air filter too. (1 page 65)
If the message appears again after you replace the lamp and the
air filter, the lamp replacement process is not complete. Check
the lamp replacement process. (1 page 65)
Please clean the filter.
c It is time to clean the air filter. Clean the air filter. (1 page 70)
Note
To clear the message on the screen, press any key on the remote
Please clean the filter. Have
you finished? Yes No
c It is time to clean the air filter. Clean the air filter. (1 page 70)
air filter, select “No.”
Projector temperature is
high. Cooling Setting
should be “High” if
projector is being used at
high altitude.
c Check to ensure that the Ventilation holes on the unit are not
covered. (1 page 13)
c When using the projector at high altitude, set the Cooling
Setting to “High”. (1 page 48)
Note
When temperature inside the projector remains high, the Cooling
Setting is switched to “High” in one minute, then the fan speed
increases.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution messages
Message
Cause and Remedy
c No signal is input in the selected input. Check connections.
(1 page 18)
x
Not applicable!
c Press the appropriate button.
c The operation to be activated by the button is currently
prohibited.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Turn off the projector and
unplug the AC power cord.
Replacing the Lamp
and the Air Filter and
cleaning the
Ventilation holes
(intake)
2 When setting the projector on a
flat surface such as a desk etc.,
put a cloth to prevent the surface
from being scratched. Reverse
the projector as illustrated, then
place it on the cloth.
Note
Tools you need to get started:
Be sure that the projector is placed on a
stable surface.
Standard Phillips screwdriver
Cloth (for scratch protection)
The lamp used for the light source has a
certain lifespan. When the lamp dims, the
color balance of the picture becomes
strange, or “Please replace the Lamp/Filter.
End of Lamp/Filter life. Lamp off in 1 min.”
appears on the screen, the lamp may be
exhausted. Replace the lamp with a new one
(not supplied) without delay.
3 While holding up the cover
release lever on the right, slide
the top cover until it stops.
Use an LMP-H400 Projector Lamp as the
replacement lamp.
The air filter is supplied with the LMP-H400
Projector Lamp. When you replace the lamp,
it is also time to replace the air filter.
Whenever you replace the lamp, be sure to
replace the air filter with a new one. Also
clean the ventilation holes (intake).
Cover release lever
4 Loosen the screw on the lamp
coverwith aPhilipsscrewdriver,
and then open the lamp cover.
Caution
• The lamp remains hot after the projector is
turned off with the ?/1 (ON/STANDBY)
switch. If you touch the lamp, you may burn
your fingers. When you replace the lamp,
wait for at least an hour for the lamp to cool.
• Do not touch the surface of the lens. If you
touch it, wipe off the fingerprints with a
soft cloth.
• Pay special attention to replacing the lamp
when the projector is installed on the ceiling.
• When removing the lamp unit, make sure it
remains horizontal, then pull straight up. Do
not tilt the lamp unit. If you pull out the lamp
unit while tilted and if the lamp breaks, the
pieces may scatter, causing injury.
• When you remove the air filter, be careful
not to let any dust fall into the projector.
• Replacing the air filter is crucial to maintain
the good performance of the projector or to
prevent malfunction to it. When a warning
message for replacing the air filter appears,
replace the air filter immediately.
Note
Be sure to use a Philips screwdriver with a
shaft length of 130 mm (5 /8 inches) or
more when replacing a projector lamp.
1
65
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Remove the valve cap (1), then
turn the gas releasing valve
clockwise, using a Philips
screwdriver (2).
6 Loosen the four screws on the
lamp unit with a Philips
screwdriver.
7 Hold the lamp unit with your
hand, and then, pushing the
lamp release lever toward the
arrow direction (toward the
right), pull the lamp unit straight
out.
Valve cap
Note
Turn the gas releasing valve clockwise until
a hissing sound comes out from the valve.
After this hissing sound stops, go to the next
step.
Xenon gas is encapsulated under high
pressure inside of the lamp. This xenon gas
is odorless and harmless. However, if you
drop the lamp or strike it without releasing
gas, the lamp may burst. This may result in
an injury.
Lamp release lever
Note
Hold the lamp unit tightly so that you do not
drop it, because it is heavy (approx. 2.9 kg
(6 lb 6 oz)). Dropping the lamp may result in
an injury or a breakdown of the projector.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
8 Insert the new lamp unit straight
in all the way until it is securely
in place and you hear it click.
9 Tighten the four screws
loosened in step 6 to secure the
lamp unit to the projector.
10 Tighten the screw loosened in
step 4 to close the lamp cover.
Notes
• Insert the new lamp unit while holding it
tightly, because it is heavy (approx. 2.9 kg
(6 lb 6 oz)). Dropping the lamp may result
in an injury.
• Be careful not to touch the fan or optical
block inside the unit.
• Confirm that the lamp release lever has
returned to its original position. If not, the
projector will not turn on.
11 Close the top cover.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
12 Reverse the projector, then
place it on the cloth.
14 Remove the air filter.
Claws
Note
15 Attach the new air filter so that
it fits into the each claws (5
Be sure that the projector is placed on a
stable surface.
positions) on the filter holder.
13 Remove the filter holder.
Note
Attach the Air Filter aligning it with the
shape of the filter holder.
Also, do not touch the fan after removing the
air filter that is set deep inside the projector.
16 Attach the filter holder.
Hook
When the air filter cover (supplied) has
installed on the ceiling, remove this air
filter cover before removing the filter
holder.
For detailed information on the dust
protector, see “Ceiling Installation”
(1 page 78).
Note
Attach the filter holder securely by pressing
on the hook until a click is heard. The
projector will not turn on unless the filter
holder is securely closed.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
17 Be careful not to let dust near
the Ventilation holes (intake) go
inside the inner part of the
projector when cleaning.
Notes
• Be sure to use an LMP-H400 Projector Lamp
for replacement. If you use lamps other than
the LMP-H400, the projector may
malfunction.
• Be sure to turn off the projector and unplug
the power cord before replacing the lamp,
then check the ON/STANDBY lamp has
already been turned off.
Ventilation holes
(intake)
• The projector will not turn on unless the lamp
is securely installed in place.
• The projector will not turn on unless the lamp
cover are securely closed.
• To cancel a message displayed on the screen,
press either the button on the remote control
or the one on the control panel on the
projector.
18 Place the project back on its
original position.
Note
19 Turn on the projector, then
select the desired setting item
The disposal rules for used fluorescent tubes
depend on where you live. Follow the waste
disposal policy in your area.
on the Setup
menu. The
menu screen below will be
appeared.
20 Select “Yes”.
Caution
Do not put your hands into the lamp
replacement slot, and do not allow any liquid
or other objects into the slot to avoid
electrical shock or fire.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the Air
Filter
Cleaning and the
Screen of the
Projector
When “Please clean the filter.” appears on
the screen, you should clean the air filter.
The air filter should be cleaned every 1,250
hours. This value varies depending on the
environment or how the projector is used.
1,250 hours are approximate.
Clean the air filter with a vacuum cleaner. If
the dust still remains, wash the air filter with
a mild detergent solution and dry it in a
shaded place.
Cleaning the lens
The lens surface is especially treated to
reduce reflection of light.
As incorrect maintenance may impair the
performance of the projector, take care with
respect to the following:
• Wipe the lens gently with a soft cloth such
as a cleaning cloth or glass cleaning cloth.
• Stubborn stains may be removed with a
soft cloth such as a cleaning cloth or glass
cleaning cloth lightly dampened with
water.
• Never use solvent such as alcohol,
benzene or thinner, or acid, alkaline or
abrasive detergent, or chemical cleaning
cloth, as they will damage the lens surface.
Notes
• Be careful that the filter does not get caught
in the vacuum cleaner.
• When you clean the air filter, make sure you
do not damage it.
For details on how to attach and remove the
air filter, see “Replacing the Lamp and the
Air Filter and cleaning the Ventilation holes
(intake)” Steps 13 to 16. (1 page 68)
• When you remove the air filter, be careful
not to let any dust fall into the projector.
• Cleaning the air filter is crucial to maintain
the good performance of the projector or to
prevent malfunction to it. When a warning
message for cleaning the air filter appears,
clean the air filter immediately.
Cleaning the cabinet
• To remove dust from the cabinet, wipe
gently with a soft cloth. If dust is
persistent, wipe with a soft cloth slightly
moistened with a diluted mild detergent
solution.
• Never use any type of abrasive pad,
alkaline/acid cleaner, scouring powder, or
volatile solvent, such as alcohol, benzene,
thinner or insecticide.
• Using such materials or maintaining
prolonged contact with rubber or vinyl
materials may result in damage to the
screen surface and cabinet material.
Black points and bright points (red,
blue, or green) on the screen
The projector is manufactured using high-
precision technology.
You may, however, see tiny black points
and/or bright points (red, blue, or green) that
continuously appear on the projector.
This is a normal result of the manufacturing
process and does not indicate a malfunction.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Y PB/CB PR/CR
Component: phono type
Y with Sync: 1 Vp-p 2dB sync
negative (75 ohms terminated)
PB/CB: 0.7 Vp-p 2dB (75 ohms
terminated)
Specifications
System
PR/CR: 0.7 Vp-p 2 dB (75 ohms
terminated)
Digital RGB/Y CB (PB) CR (PR)
HD D-sub 15-pins
Analog RGB/component:
R/CR (PR): 0.7 Vp-p 2 dB
(75 ohms terminated)
Projection system
SXRD panel, 1 lens, projection
system
HDMI
INPUT A
LCD panel
Lens
0.61-inch (15.4 mm) SXRD panel
6,220,800 pixels (2,073,600 pixels
× 3)
1.8 times zoom lens (motorized)
f=18.7 mm to 33.7 mm/F2.54 to
F3.53
G: 0.7 Vp-p 2 dB
(75 ohms terminated)
G with sync/Y: 1 Vp-p 2 dB sync
negative (75 ohms terminated)
B/CB (PB): 0.7 Vp-p 2 dB
(75 ohms terminated)
SYNC/HD: Composite sync input:
TTL level, positive/negative
Horizontal sync input: TTL level,
positive/negative
VD: Vertical sync input: TTL
level, positive/negative
Minijack
Power on: DC 12 V, output
impedance: 4.7 kilohms
Power off: 0 V
Lamp
400W Xenon Lamp
Projection picture size
40 inches to 300 inches
(1,016 mm to 7,620 mm)
(measured diagonally)
Color system NTSC3.58/PAL/SECAM/NTSC4.43/
PAL-M/PAL-N/PAL60 system,
switched automatically/manually
(PAL60 system not switched
manually)
TRIGGER
REMOTE
Acceptable video signals
15 kHz RGB/component 50/60
Hz, Progressive component 50/60
Hz, DTV (480/60i, 576/50i, 480/
60p, 576/50p, 720/60p, 720/50p,
1080/60i, 1080/50i, 1080/48i),
1080/60p (HDMI input only),
1080/50p (HDMI input only),
1080/24p (HDMI input only),
Composite video, Y/C video
Acceptable computer signals
fH: 19 kHz to 72 kHz
RS-232C: D-sub 9-pins (female)
NETWORK RJ-45
10BASE-T/100BASETX
General
Dimensions 500 mm × 175 mm × 578 mm
3
7
(19 / × 7 × 22 / inches) (w/h/d)
4
8
Mass
Power requirements
AC 100 V to 240 V, 6.5 A to 2.7 A,
50/60 Hz
Power consumption
Approx. 20 kg (44 lb 2 oz)
fV: 48 Hz to 92 Hz
Maximum resolution 1920× 1080
(HDMI input only)
For details, see “Preset Signals”
(1 page 73)
Max. 650 W
Standby mode: 10 W
Standby mode (low): 0.5 W
Input
Operating temperature
5°C to 35°C (41°F to 95°F)
Operating humidity
35% to 85% (no condensation)
Storage temperature
–20°C to +60°C (–4°F to +140°F)
Storage humidity
10% to 90%
Video input VIDEO: phono type
Composite video: 1 Vp-p 2 dB
sync negative (75 ohms
terminated)
S VIDEO: Y/C mini DIN 4-pin
type
Y (luminance): 1 Vp-p 2 dB sync
negative (75 ohms terminated)
C (chrominance): burst 0.286 Vp-
p
2 dB (NTSC)
(75 ohms terminated), or
burst 0.3 Vp-p 2 dB (PAL)
(75 ohms terminated)
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Supplied accessories
Remote control RM-PJVW200 (1)
Size AA (R6) batteries (2)
AC power cord (1)
Plug holder (1)
Lens Cap (1)
Operating Instructions (1)
CD-ROM (ImageDirector3) (1)
Air Filter Cover (1)
Design and specifications are subject to change
without notice.
Optional accessories
Projector Lamp LMP-H400 (for replacement)
Projector Suspension Support PSS-H10
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning on power connection
Use a proper power cord for your local power supply.
The United
States,
Canada
Continental
Europe
UK, Ireland,
Australia,
New Zealand
Japan
China
Plug type
Female end
Cord type
YP-3
YC-13
SVT
YP-12A
YC-13D
H05VV-F
*
YP-359
YC-13
VCTF
VM0722
VM0724
VM0303B
CEE (13)
227 IEC
53 rd (OC)
53 (RVV)
Rated Voltage
& Current
10A/125V
10A/250V
VDE
10A/250V
12A/125V
10A/250V
Safety approval UL/CSA
VDE
DENANHO
CCC
* Use a rated plug that complies with the regulation of each country/region and the specifications.
Preset Signals
The following table shows the signals and video formats which you can project using this
unit.
When a signal other than the preset signal shown below is input, the picture may not be
displayed properly.
Memory
No.
Preset signal
(resolution)
fH
(kHz)
fV
(Hz)
Sync
H Size
1
2
3
VIDEO/60 60 Hz
VIDEO/50 50 Hz
15.734 59.940
15.625 50.000
–
–
–
–
–
480/60i
576/50i
480/60p
DTV 480/60i
(720 × 480i)
15.734 59.940 SonG/Y or composite
sync
4
5
DTV 576/50i
(720 × 576i)
15.625 50.000 SonG/Y or composite
sync/composite video
–
–
480/60p
31.470 60.000 SonG/Y
(720 × 480p)
(Progressive
NTSC)
6
7
576/50p
1080/60i
576/50p
(720 × 576p)
(Progressive PAL)
31.250 50.000 SonG/Y
33.750 60.000 SonG/Y
–
–
1035/60i
(1920 × 1035i),
1080/60i
(1920 × 1080i)
8
1080/50i
1080/50i
28.130 50.000 SonG/Y
–
(1920 × 1080i)
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Memory
No.
Preset signal
(resolution)
fH
(kHz)
fV
(Hz)
Sync
H Size
9
1080/24PsF 1080/48i
27.000 48.000 SonG/Y
45.000 60.000 SonG/Y
37.500 50.000 SonG/Y
–
–
–
–
–
–
(1920 × 1080i)
10
11
12
13
14
720/60p
720/60p
(1280 × 720p)
720/50p
720/50p
(1280 × 720p)
1080/60p
1080/50p
1080/24p
640 × 350
1080/60p
(1920 × 1080p)
67.500 60.000
56.260 50.000
26.973 23.976
–
–
–
1080/50p
(1920 × 1080p)
1080/24p
(1920 × 1080p)
21
22
VGA-1 (VGA350) 31.469 70.086 H-pos, V-neg
800
832
VESA 85
37.861 85.080 H-pos, V-neg
(VGA350)
23
24
640 × 400
NEC PC98
24.823 56.416 H-neg V-neg
31.469 70.086 H-neg V-pos
848
800
VGA-2 (TEXT)/
VESA70
25
VESA 85
37.861 85.080 H-neg, V-pos
832
(VGA400)
26
27
28
29
640 × 480
VESA 60
Mac 13
31.469 59.940 H-neg, V-neg
35.000 66.667 H-neg, V-neg
37.861 72.809 H-neg, V-neg
37.500 75.000 H-neg, V-neg
800
864
832
840
VESA 72
VESA 75 (IBM
M3)
30
VESA 85 (IBM
M4)
43.269 85.008 H-neg, V-neg
832
31
32
33
34
800 × 600
VESA 56
VESA 60
VESA 72
35.156 56.250 H-pos, V-pos
37.879 60.317 H-pos, V-pos
48.077 72.188 H-pos, V-pos
46.875 75.000 H-pos, V-pos
1024
1056
1040
1056
VESA 75 (IBM
M5)
35
36
37
38
39
45
47
VESA 85
Mac 16
53.674 85.061 H-pos, V-pos
49.724 74.550 H-neg, V-neg
48.363 60.004 H-neg, V-neg
56.476 70.069 H-neg, V-neg
60.023 75.029 H-pos, V-pos
60.000 60.000 H-pos, V-pos
63.974 60.013 H-pos, V-pos
1048
1152
1344
1328
1312
1800
1696
832 × 624
1024 × 768 VESA 60
VESA 70
VESA 75
1280 × 960 VESA 60
1280 × 1024 VESA 60
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Memory
No.
Preset signal
(resolution)
fH
(kHz)
fV
(Hz)
Sync
H Size
50
55
56
1400 × 1050 SXGA +
65.317 59.978 H-neg, V-pos
47.776 59.870 H-neg, V-pos
44.772 59.855 H-neg, V-pos
1864
1664
1664
1280 × 768 1280 × 768/60
1280 × 720 1280 × 720/60
Preset memory numbers for each input signal
Analog signal
Signal
Preset memory number
Video signal (VIDEO INPUT and
S VIDEO INPUT connectors)
1, 2
Component signal (INPUT A and Y PB/CB PR/
CR connectors)
3 to 11
Video GBR signal (INPUT A connector)
Computer signal (INPUT A connector)
3 to 11
21 to 39, 55 to 56
Digital signal
Signal
Preset memory number
3 to 8, 10 to 14
Component signal (HDMI 1, 2 connectors)
Video GBR signal (HDMI 1, 2 connectors)
Computer signal (HDMI 1, 2 connectors)
3 to 8, 10 to 14
10 to 13*, 26, 32, 36, 37, 45, 47,
50, 55
* Some digital signals input from computers may be displayed as preset memory number of DTV
signal (Component or Video GBR signal).
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Input Signals and Adjustable/Setting Items
The items in the menus available to adjust differ depending on the input signal. The
following tables indicate them.
The items that cannot be adjusted are not displayed in the menu.
Item
Input signal
Video signal
Component
signal
Video GBR signal
PC signal
Advanced Iris
Film Projection
Motion Enhancer
Contrast
z
z
z
z
z
z
z
z
z
z
z
z
z
–
z
z
–
z
z
z
–
Brightness
z
Color
z
z
(except for B & W)
Hue
z
z
z
–
(NTSC3.58/
NTSC4.43 only,
except for B & W)
Color Temp.
Sharpness
NR
z
z
z
z
z
z
z
z
–
z
z
–
(preset memory
numbers 3, 4, 7,
8, 9 only)
(preset memory
numbers 3, 4, 7,
8, 9 only)
DRC Mode
Film Mode
z
z
z
z
–
–
(excluding preset (excluding preset
memory numbers memory numbers
12, 13, 14)
12, 13, 14)
z
z
(excluding preset (excluding preset
memory number memory number
14)
14)
Black Level Adj.
Gamma Correction
x.v.Color
z
z
z
z
z
z
z
z
z
z
z
z
–
–
z
–
RCP
z
z
z
z
Color Space
z : Adjustable/can be set
– : Not adjustable/cannot be set
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen menu
Item
Input signal
Video signal
Component
signal
Video GBR signal
PC signal
2
Wide Mode
Over Scan
z
–
z
z
z
z *
z
–
–
1
Screen Area *
–
z
z
(preset memory
numbers 7, 8, 9,
12, 13, 14 only)
(preset memory
numbers 7, 8, 9,
12, 13, 14 only)
3
V Center *
z
z
–
z
z
–
z
z
–
z
3
Vertical Size *
–
4
APA
Phase
Pitch
Shift
z *
4
–
–
–
z *
4
–
–
–
z *
–
z
z
z
z : Adjustable/can be set
– : Not adjustable/cannot be set
1
* : This item is effective only when “Over Scan” is set to “On” in the Screen
menu.
2
* : If the input signal is from a computer, the setting cannot be made when the aspect ratio is 16:9
or wider.
3
4
* : The setting can be made only for analog signal.
Note
When connecting a cable such as an HDMI cable, etc., check the type of the signal in the Information
Menu (1 page 55) and Digital signal (1 page 75), and check items that are adjustable/can be
set.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Ceiling Installation
Use the PSS-H10 Projector Suspension Support when you install the projector on a
ceiling. The projection distances for ceiling installation are shown below. Also, attach the
supplied air filter cover for the ventilation holes (intake) to prevent the air filter from
becoming clogged with dust.
Air filter cover
Attach the air filter cover
with the F mark on the air
filter cover facing to the
front.
Note
When you use the projector placed on a floor, do not attach the air filter cover. If you attach it, the
air filter cover may get broken.
When Using the PSS-H10 Projector Suspension Support
a: Distance between the screen and the installation hole at the
ceiling side of the ceiling mount unit (front side)
x: Distance between the ceiling and the center of the screen such
that the picture will not be truncated or blocked
PSS-H10 Projector Suspension
Support (not supplied)
a
Ceiling
x
Center of the screen
Center of the lens
78
Download from Www.Somanuals.com. All Manuals Search And Download.
When using the 16:9 aspect ratio screen
Unit: mm (inches)
Screen Size 40
(inches)
60
80
100
120
150
180
200
250
300
(mm)
1016
1524
2032
2540
3048
3810
4572
5080
6350
7620
a
Minimum 1475
2105
(83)
2735
3365
3995
4940
5885
6515
8090
9665
1
3
1
3
1
3
5
5
5
Distance
(58
/
8
)
)
(107
/4
)
(132
/
2
8
)
)
(157
/
8
)
)
(196
/
8
8
)
)
(231
/
8
8
)
)
(256
/
8
)
)
(318
/
8
)
)
(380
/
8
8
)
)
Maximum 2368
3444
(135
4520
(178)
5596
(220
6672
(262
8286
(326
9900
(389
10976
(432
13666
(538
16356
1
1
5
3
3
3
7
1
1
Distance
(93
/
4
/
8)
/
/
4
/
/
/
4
/
8
(644
/
x
Minimum 249
374
(14
498
5
623
5
747
5
934
(36
1121
1
1245
1
1557
3
1868
5
7
3
7
Distance
(9
/
8)
/
4)
(19
/8
)
(24
/
8)
(29
/
8)
/8
)
(44
/
4
)
(49
/
8)
(61
/8
)
(73
/8)
Maximum 590
751
(29
913
(36)
1075
3
1237
3
1479
1722
7
1884
1
2288
1
2692
(106)
1
5
1
Distance
(23
/
4)
/
8)
(42
/
8)
(48
/
4)
(58
/4
)
(67
/
8
)
(74
/
4)
(90
/8
)
To calculate the installation measurements (SS: Screen Size)
1
1
a (minimum) = 31.5 (1 / ) × SS + 214.8 (8 / )
4
2
1
5
a (maximum) = 53.8 (2 / ) × SS + 216.1 (8 / )
8
8
1
x (minimum) = 6.2263 ( / ) × SS
4
11
x (maximum) = 8.0876 (
/
) × SS + 266 (10 1
/
)
2
32
When using the 4:3 aspect ratio screen
Unit: mm (inches)
Screen Size 40
(inches)
60
80
100
120
150
180
200
250
300
(mm)
1016
1524
2032
2540
3048
3810
4572
5080
6350
7620
a
Minimum 1757
2528
5
3299
(130)
4070
4841
5997
7154
7925
9853
(388)
11780
7
1
3
5
1
3
1
Distance
(69
/
4
)
(99
/
8
)
(160
/
8
4
)
)
(190
/
8
)
)
(236
/
4
8
)
)
(281
/
4
)
)
(312
/
8
)
(463
/
8
8
)
)
Maximum 2850
4167
(164
5483
(216)
6800
(267
8117
(319
10092
(397
12068
(475
13385
1
16677
3
19969
3
1
1
3
5
3
1
Distance
(112
/
4
)
/
8
)
/
/
8
/
/
4
(527
/
8)
(656
/4
)
(786
/
x
Minimum 305
457
610
1
762
(30)
914
1143
(45)
1372
1
1524
(60)
1905
1
2286
1
1
Distance
(12
/
8
)
)
(18)
(24
/
8
4
)
)
(36)
(54
/
8
)
(75
/8
)
(90
/8)
Maximum 662
860
7
1058
1256
1
1454
1
1751
(69)
2048
1
2246
1
2740
(108)
3235
(127
1
3
1
Distance
(26
/
8
(33
/
8)
(41
/
(49
/
2)
(57
/
4)
(80 /16) (88
/
2)
/
2
)
To calculate the installation measurements (SS: Screen Size)
9
1
a (minimum) = 38.551 (1 / ) × SS + 214.8 (8 / )
16
2
5
5
a (maximum) = 65.842 (2 / ) × SS + 216.1 (8 / )
8
8
5
x (minimum) = 7.62 ( / ) × SS
16
13
x (maximum) = 9.8979 (
/
) × SS + 266 (10 1
/
)
32
2
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Attaching the PSS-H10 projector suspension support
For details on installation on a ceiling, refer to the Installation manual for Dealers of the
PSS-H10. Make sure to consult with a qualified Sony personnel for installation.
The installation measurements are shown below when installing the projector on a ceiling
using the PSS-H10.
Top view
Install the projector so that the center of the lens is parallel to the center of the screen.
1
(
)
(
5
)
8
252.7 10
130
/
Front of the cabinet
Center of the lens
(
)
303 12
Upper ceiling
mount bracket
Distance between the screen
and the center of the lens
Center of the supporting pole
(The center of the supporting pole
is different from that of the unit.)
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Front view
Ceiling
Center of the
supporting pole
The bottom
surface of the
mount bracket
Center of the lens
Side view
Center of the lens
Front of the cabinet
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Making Fine Adjustments to the Horizontal
Picture Position
Tools you need to get started
Phillips screwdriver: 110 mm (4 3/8 inches) or longer
Flat-head screwdriver: 110 mm (4 3/8 inches) or longer
Note
For details on how to make fine adjustments of the horizontal picture position, consult with qualified
personnel. When the lens is scratched, there is a charge for repair.
Also, do not look into the lens while you are adjusting the picture position.
You can adjust the lens position right or left by about 1 mm from the center of the lens.
1 Remove the ring (washer) attached around the lens by turning it
counterclockwise.
2 Loosen the four screws located at the position indicated with an arrow
by turning them counterclockwise 2 turns each with a Phillips
screwdriver.
Note
Be sure not to loosen the screws too much, or the screws may fall out.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Insert a flat-blade screwdriver into the lens adjustment groove located at
the left bottom (when the projector projects the image when placed on
the floor, on a desk, etc.), and turn it in the direction in which you want
to move the lens.
If you turn it to the left, the lens moves to the left, and if you turn it to the right, the
lens moves to the right. (The range of movement is approximately 1mm.)
Fine adjustment level
Fine adjustment level
Top view
Picture position when
moving the picture the
maximum distance to the
left.
Picture position when
moving the picture the
maximum distance to the
right.
When using the 16:9 screen
Unit: mm (inches)
Image
projection
size (inch)
40
60
80
100
120
150
180
200
(mm)
1016
1524
2032
2540
3048
3810
4572
5080
Fine
adjustment
level
60
90
120
150
(6 )
180
225
270
300
(2 3/8)
(3 5/8)
(4 3/4)
(7 1/8)
(8 7/8)
(10 3/4)
(11 7/8)
83
Download from Www.Somanuals.com. All Manuals Search And Download.
4 After you have decided the lens position, insert the Philips screwdriver
at the locations of the four screws around the border of the lens in turn
and tighten them to fix the lens in place.
5 Attach the ring (washer) aligning the F mark on the inside of the ring with
the F mark on the projector by turning it clockwise.
Note
When you use the horizontal and vertical lens shift features at the same time and adjust the horizontal
lens shift to the maximum, you can move the picture upward from the center of the lens by a
maximum of 53% of the screen size.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
I
Index
A
Adjust Signal
Phase ....................................................47
Pitch .....................................................47
Shift .....................................................47
Adjuster ...................................................25
Adjusting
Location of Controls
Rear/Bottom .......................................... 9
picture position ....................................22
Auto Input Search ....................................50
Function .............................................. 50
Information ......................................... 55
Picture ................................................. 41
Setup ................................................... 48
B
Background .............................................51
Blanking ..................................................53
Brightness ................................................42
C
Caution ................................................ 64
Warning ............................................... 63
Ceiling Installation ..................................78
Cinema Black Pro ....................................41
Color System ...........................................49
Color Temp. ......................................33, 42
Connecting
Computer .............................................21
Contrast ...................................................42
Cooling Setting ........................................48
NR .......................................................... 43
O
P
Picture Mode
E
Expert Setting ..........................................43
Cinema ................................................ 41
Dynamic .............................................. 41
Standard .............................................. 41
USER .................................................. 32
User ..................................................... 41
Precautions ................................................ 7
Preset Memory ........................................ 55
Preset Signals .......................................... 73
F
fH ..........................................................55
fV ..........................................................55
G
H
HDMI ......................................................19
HDMI Control .........................................50
Hue ..........................................................42
85
Download from Www.Somanuals.com. All Manuals Search And Download.
R
Remote control
inserting the batteries ..........................11
location of controls .............................. 10
Reset
S
Screen Area ............................................. 47
Selecting the menu language ..................26
Sharpness ................................................ 42
Specifications ..........................................71
Status .......................................................48
Supplied accessories ...............................11
T
Troubleshooting ...................................... 60
V
W
Wide Mode
Full ......................................................46
Full1 .................................................... 46
Full2 .................................................... 46
Normal ................................................. 46
Wide Zoom ..........................................46
Zoom ...................................................46
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Printed on 70% or more recycled paper.
Printed in Japan
Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
|