4-097-546-13 (2)
LCD Projection TV
HD-Monitor
Operating Instructions
If, after reading this instruction manual, you have additional
questions related to the use of your Sony projection TV,
please call one of the following numbers (English only).
Customers in the continental United States
contact the Direct Response Center at:
1-800-222-SONY (7669)
KF-42WE610
KF-50WE610
KF-60WE610
Customers in Canada contact the
Customer Relations Center at:
(416) 499-SONY (7669)
Printed in U.S.A.
2003 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Note to CATV system installer
WARNING
This reminder is provided to call the CATV system
installer’s attention to Article 820-40 of the NEC that
provides guidelines for proper grounding and, in
particular, specifies that the cable ground shall be
connected to the grounding system of the building, as
close to the point of cable entry as practical.
To prevent fire or shock hazard, do not
expose the LCD Projection TV to rain or
moisture.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Use of this television receiver for other than private
viewing of programs broadcast on UHF, VHF,
transmitted by cable companies or satellite for the
use of the general public may require authorization
from the broadcaster/cable company and/or
program owner.
ATTENTION
RISQUE DE CHOC ELECTRIQUE,
NE PAS OUVRIR
PRECAUCION
RIESGO DE CHOQUE ELECTRICO
NO ABRIR
NOTIFICATION
CAUTION : TO REDUCE THE RISK OF ELECTRIC SHOCK,
This equipment has been tested and found to comply with
the limits for a Class B digital device pursuant to Part 15
of the FCC Rules. These limits are designed to provide
reasonable protection against harmful interference in a
residential installation. This equipment generates, uses,
and can radiate radio frequency energy and, if not
installed and used in accordance with the instructions,
may cause harmful interference with radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to radio
or television reception, which can be determined by
turning the equipment off and on, the user is encouraged
to try to correct the interference by one or more of the
following measures:
(
)
DO NOT REMOVE COVER OR BACK .
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
This symbol is intended to alert the user to the
presence of uninsulated “dangerous voltage”
within the product’s enclosure that may be of
sufficient magnitude to constitute a risk of
electric shock to persons.
This symbol is intended to alert the user to the
presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
❑
❑
Reorient or relocate the receiving antennas.
CAUTION
Increase the separation between the equipment and
receiver.
To prevent electric shock, do not use this polarized AC
plug with an extension cord, receptacle or other outlet
unless the blades can be fully inserted to prevent blade
exposure.
❑
❑
Connect the equipment into an outlet on a circuit
different from that to which the receiver is
connected.
Note on Caption Vision
Consult the dealer or an experienced radio/TV
technician for help.
This television receiver provides display of television
closed captioning in accordance with §15.119 of the FCC
rules.
You are cautioned that any changes or
modifications not expressly approved in
this manual could void your warranty and
your authority to operate this equipment.
Owner’s Record
The model and serial numbers are located at the rear of
the LCD Projection TV, below the Sony logo, on the
sticker, and also on the TV box (white label). Record
these numbers in the spaces provided below. Refer to
them whenever you call upon your Sony dealer regarding
this product.
This document is for the remote control RM-Y913.
MODEL: KF-42WE610, KF-50WE610, KF-60WE610
Please keep this notice with the instruction manual.
Model No.
Serial No.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Safety
❑
Operate the LCD Projection TV only on 120 V AC.
❑
The plug is designed, for safety purposes, to fit into
the wall outlet only one way. If you are unable to
insert the plug fully into the outlet, contact your
dealer.
❑
❑
If any liquid or solid object should fall inside the
cabinet, unplug the LCD Projection TV immediately
and have it checked by qualified service personnel
before operating it further.
If you will not be using the LCD Projection TV for
several days, disconnect the power by pulling the plug
itself. Never pull on the cord.
For details concerning safety precautions, see
Installing
❑
To prevent internal heat buildup, do not block the
ventilation openings.
❑
Do not install the LCD Projection TV in a hot or
humid place, or in a place subject to excessive dust or
mechanical vibration.
❑
❑
Avoid operating the LCD Projection TV at
temperature below 41°F (5°C).
If the LCD Projection TV is transported directly from
a cold to a warm location, or if the room temperature
changes suddenly, the picture may be blurred or show
poor color. In this case, please wait a few hours to let
the moisture evaporate before turning on the LCD
Projection TV.
❑
To obtain the best picture, do not expose the screen to
direct illumination or direct sunlight. It is
recommended to use spot lighting directed down from
the ceiling or to cover the windows that face the
screen with opaque drapery. It is desirable to install
the LCD Projection TV in a room where the floor and
walls are not of a reflective material.
®
As an ENERGY STAR Partner,
Sony Corporation has determined
that this product meets the
®
ENERGY STAR guidelines for
energy efficiency.
®
ENERGY STAR is a U.S. registered mark.
®
TruSurround, SRS and the (
of SRS Labs, Inc.
)
symbol are trademarks
TruSurround technology is incorporated under license
from SRS Labs, Inc.
BBE and BBE Symbol are trademarks of BBE Sound, Inc.
and are licensed by BBE Sound, Inc. under U.S. Patent No.
4,638,258 and 4,482,866.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safety Instructions
Important
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
Safeguards
For your protection, please read these instructions
completely, and keep this manual for future reference.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
Carefully observe and comply with all warnings, cautions
and instructions placed on the set or described in the
operating instructions or service manual.
7) Do not block any ventilation openings. Install in
accordance with the manufacturer’s instructions.
WARNING
8) Do not install near any heat sources such as radiators,
heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
To guard against injury, the following basic safety
precautions should be observed in the installation, use
and servicing of the set.
9) Do not defeat the safety purpose of the polarized or
grounding-type plug. A polarized plug has two
blades with one wider than the other. A grounding
type plug has two blades and a third grounding prong.
The wide blade or the third prong are provided for
your safety. If the provided plug does not fit into
your outlet, consult an electrician for replacement of
the obsolete outlet.
Use
Power Sources
This set should be operated only from
the type of power source indicated on
the serial/model plate. If you are not sure
of the type of electrical power supplied
to your home, consult your dealer or
10) Protect the power cord from being walked on or
pinched particularly at plugs, convenience
receptacles, and the point where they exit from the
apparatus.
local power company. For those sets designed to operate
from battery power, refer to the operating instructions.
Grounding or Polarization
This set is equipped with a polarized AC power cord plug
(a plug having one blade wider than the other), or with a
three-wire grounding type plug (a plug having a third pin
for grounding). Follow the instructions below:
11) Only use attachments/accessories specified by the
manufacturer.
12) Use only with the cart, stand, tripod,
bracket, or table specified by the
For the set with a polarized AC power cord
plug
manufacturer, or sold with the apparatus.
When a cart is used, use caution when
moving the cart/apparatus combination
to avoid injury from tip-over.
This plug will fit into the power outlet
only one way. This is a safety feature. If
you are unable to insert the plug fully
into the outlet, try reversing the plug. If
the plug still fails to fit, contact your electrician to have a
suitable outlet installed. Do not defeat the safety purpose
of the polarized plug by forcing it in.
13) Unplug this apparatus during lightning storms or
when unused for long periods of time.
14) Refer all servicing to qualified service personnel.
Servicing is required when the apparatus has been
damaged in any way, such as power-supply cord or
plug is damaged, liquid has been spilled or objects
have fallen into the apparatus, the apparatus has been
exposed to rain or moisture, does not operate
normally, or has been dropped.
Alternate Warning for the set with a three-
wire grounding type AC plug
This plug will only fit into a grounding-
type power outlet. This is a safety
15) Apparatus shall not be exposed to dripping or
splashing and no objects filled with liquids, such as
vases, shall be placed on the apparatus.
feature. If you are unable to insert the
plug into the outlet, contact your
electrician to have a suitable outlet
installed. Do not defeat the safety purpose of the
grounding plug.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Overloading
On contamination on the screen surface
The screen surface has a special coating to reduce a
picture displayed by reflecting. If you clean the screen
surface in the wrong way, the screen may be damaged. To
clean the screen, do as follows:
Do not overload wall outlets, extension
cords or convenience receptacles
beyond their capacity, since this can
result in fire or electric shock.
Always turn the set off when it is not
being used. When the set is left
unattended and unused for long
periods of time, unplug it from the
wall outlet as a precaution against the
possibility of an internal malfunction that could create a
fire hazard.
❑
Clean the screen with a soft cloth, such as the
supplied cleaning cloth or a glass cleaning cloth.
To remove hard contamination, use the supplied
cleaning cloth or a glass cleaning cloth moistened
with a solution of mild detergent and water.
Do not use any type of abrasive pad, alkaline
cleaner, acid cleaner, scouring powder, chemical
cloth, or solvent such as alcohol, benzene or thinner,
as these may scratch the screen's coating.
❑
❑
If a snapping or popping sound from a TV
set is continuous or frequent while the TV
is operating, unplug the TV and consult
your dealer or service technician. It is
normal for some TV sets to make
Installation
Water and Moisture
occasional snapping or popping sounds,
particularly when being turned on or off.
Do not use power-line operated sets
near water — for example, near a
bathtub, washbowl, kitchen sink, or
laundry tub, in a wet basement, or
near a swimming pool, etc.
Object and Liquid Entry
Never push objects of any kind into the
set through the cabinet slots as they may
touch dangerous voltage points or short
out parts that could result in a fire or
electric shock. Never spill liquid of any
kind on the set.
Accessories
Do not place the set on an unstable
cart, stand, table or shelf. The set
may fall, causing serious injury to a
child or an adult and serious damage
to the set. Use only a cart or stand
recommended by the manufacturer
for the specific model of LCD
Attachments
Do not use attachments not
recommended by the manufacturer, as
they may cause hazards.
Projection TV. An appliance and cart
combination should be moved with
care. Quick stops, excessive force,
and uneven surfaces may cause the appliance and cart
combination to overturn.
Cleaning
Clean the cabinet of the LCD Projection
TV with a dry soft cloth. To remove dust
from the screen, wipe it gently with a soft
cloth. Stubborn stains may be removed
with a cloth slightly dampened with
solution of mild soap and warm water. Never use strong
solvents such as thinner or benzine for cleaning.
Ventilation
The slots and openings in the cabinet and in the back or
bottom are provided for necessary ventilation. To ensure
reliable operation of the set, and to protect it from
overheating, these slots and openings must never be
blocked or covered.
If the picture becomes dark after using the LCD
Projection TV for a long period of time, it may be
necessary to clean the inside of the LCD Projection TV.
Consult qualified service personnel.
❑
Never cover the slots and openings
with a cloth or other materials.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
❑
❑
Never block the slots and openings
by placing the set on a bed, sofa, rug
or other similar surface.
Antenna Grounding According to the NEC
Refer to section 54-300 of Canadian Electrical Code for
Antenna Grounding.
Never place the set in a confined
space, such as a bookcase or built-in
cabinet, unless proper ventilation is
provided.
Antenna lead-in wire
Ground clamp
Antenna lead-in wire
❑
Do not place the set near or over a
radiator or heat register, or where it is
exposed to direct sunlight.
(NEC Section 810-20)
Electrical
service
Grounding conductors
(NEC section 810-21)
equipment
Ground clamps
Power service grounding
electrode system (NEC Art
250 Part H)
NEC: National
Electrical Code
Power-Cord Protection
Do not allow anything to rest on or roll
over the power cord, and do not place the
set where the power cord is subject to
wear or abuse.
Lightning
For added protection for this television receiver during a
lightning storm, or when it is left unattended and unused
for long periods of time, unplug it from the wall outlet
and disconnect the antenna. This will prevent damage to
the receiver due to lightning and power-line surges.
Antennas
Outdoor Antenna Grounding
If an outdoor antenna is installed, follow the precautions
below. An outdoor antenna system should not be located
in the vicinity of overhead power lines or other electric
light or power circuits, or where it can come in contact
with such power lines or circuits.
Service
Damage Requiring Service
Unplug the set from the wall outlet and refer servicing to
qualified service personnel under the following
conditions:
WHEN INSTALLING AN OUTDOOR ANTENNA
SYSTEM, EXTREME CARE SHOULD BE TAKEN TO
KEEP FROM CONTACTING SUCH POWER LINES
OR CIRCUITS AS CONTACT WITH THEM IS
ALMOST INVARIABLY FATAL.
❑
❑
❑
❑
When the power cord or
plug is damaged or frayed.
If liquid has been spilled into
the set.
If the set has been exposed
to rain or water.
If the set has been subject to
excessive shock by being
dropped, or the cabinet has
been damaged.
If the set does not operate
normally when following the
operating instructions.
Be sure the antenna system is grounded so as to provide
some protection against voltage surges and built-up static
charges.
Section 810 of the National Electrical Code (NEC) in
USA and Section 54 of the Canadian Electrical Code in
Canada provides information with respect to proper
grounding of the mast and supporting structure,
grounding of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location of antenna
discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
❑
Adjust only those controls
that are specified in the
operating instructions.
Improper adjustment of
other controls may result in
damage and will often require extensive work by a
qualified technician to restore the set to normal
operation.
❑
When the set exhibits a distinct change in
performance, it indicates a need for service.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Servicing
Installation
Do not attempt to service the set by yourself
since opening the cabinet may expose you to
dangerous voltage or other hazards. Refer all
servicing to qualified service personnel.
❑
If direct sunlight or other strong illumination shines
on the screen, part of the screen may appear white
due to reflections from behind the screen. This is a
structural property of the LCD Projection TV.
Do not expose the screen to direct illumination or
direct sunlight.
The picture quality may be affected by your viewing
position. If you sit too close to the TV, you may
suffer from eye fatigue.
Replacement Parts
When replacement parts are required, be sure the service
technician certifies in writing that he has used
replacement parts specified by the manufacturer that have
the same characteristics as the original parts.
❑
For the best picture quality, install your LCD
projection TV according to the operating
instructions.
Unauthorized substitutions may result in fire, electric
shock or other hazards.
Sit at least 1.8m (approx. 5.9ft.) for KF-42WE610,
2.0m (approx. 6.6ft.) for KF-50WE610 or 2.2m
(approx. 7.2ft.) for KF-60WE610 away from your
LCD projection TV, and within 60° of the vertical
viewing area, and 130° of the horizontal viewing
area.
When installing your LCD Projection TV against a
wall, keep it at least 10 cm (4 inches) from the wall.
Avoid installing the LCD projection TV close to
high temperature sources such as a heater.
Safety Check
Upon completion of any service or repairs
to the set, ask the service technician to
perform routine safety checks (as specified
by the manufacturer) to determine that the
set is in safe operating condition, and to so
certify. When the set reaches the end of its
useful life, improper disposal could result
in a picture tube implosion. Ask a qualified
service technician to dispose of the set.
❑
❑
Projection lamp
Your LCD projection TV uses a projection lamp as
For Safety
❑
its light source. When the projection lamp wears out
after using the LCD projection TV for a long period
of time, the screen image becomes dark, or no image
will appear on the display. If the lamp replacement
indicator of the front panel blinks in red, replace the
lamp with a new one (not supplied). In some cases,
the bulb bursts inside the lamp unit noisily, but the
lamp unit is securely designed so that the pieces of
broken glass remain inside the lamp unit. (See
Be careful when moving
the LCD Projection TV
When you place the LCD Projection
TV in position, be careful not to
drop it on your foot or fingers.
Watch your footing while installing
the LCD Projection TV.
Carry the LCD Projection TV in
the specified manner
Cooling fan
This LCD projection TV uses a cooling fan. You
If you carry the LCD Projection TV in a
manner other than the specified manner
and without the specified number of
persons, it may drop and a serious injury
may be caused. Be sure to follow the instructions
mentioned below.
❑
might hear the noise from the cooling fan,
depending on the place you install the LCD
projection TV.
Carrying
Before carrying the LCD projection TV, disconnect
any accessories or cables.
❑
❑
❑
Carry the LCD Projection TV with the specified
Do not carry the LCD Projection TV holding the
speaker grill.
Hold the LCD Projection TV tightly when carrying
it.
❑
Remote control detection
❑
The remote control sensor is at the upper right side
of the TV. For the best results, aim the remote
control at this location.
About the LCD Projection TV
Although the LCD projection TV is made with high-
precision technology, black dots may appear or bright
points of light (red, blue, or green) may appear constantly
on the LCD screen. This is a structural property of the
LCD panel and is not a malfunction.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Introducing the Sony LCD Projection
Installing and Connecting the LCD
To Prevent the LCD Projection TV from Falling
When Installing Your LCD Projection TV Against a
Basic Connections
Displaying the Memory Stick Home
Connecting a DVD Player with Component
Connecting a Digital TV Receiver with component
Connecting a Digital TV Receiver with DVI-HDTV
Operating Other Components with Your LCD
Notes on Using Memory Stick, Memory Stick PRO
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Introducing the Sony LCD Projection
TV
Presenting the Sony LCD Projection TV
Thank you for purchasing the Sony LCD Projection TV.
This manual is for models KF-42WE610, KF-50WE610 and KF-60WE610.
Features
Some of the features that you will enjoy with your new LCD projection TV
include:
❑
HD-Monitor: Enables to display the 1080i, 720p, 480p and 480i digital
TV format signals.
By using the HD/DVD IN jacks, you can connect a DTV (digital
television) receiver to view DTV programs.
❑
DRC® (Digital Reality Creation) Multifunction V1: Unlike
conventional line doublers, the DRC feature converts frames reproduced
every 1/60th of a second in real time, minimizing the blur or ghost of the
motion images (for 480i signals only).
❑
❑
CineMotion™: Using the reverse 3-2 pull down technology, the
CineMotion feature allows you to obtain a smooth picture movement
when playing back movies or other video sources on film.
Twin View™: Using Multi-Image Driver (MID-X), Twin View allows
you to watch two programs side by side with the ability to zoom in on
one picture and listen to the program in the selected window. You can
watch pictures from two different sources (1080i, 720p, 480p or 480i)
simultaneously.
❑
Memory Stick® Picture Viewer: Allows you to view on your LCD
Projection TV screen digital images that are stored on Memory Stick
media.
❑
❑
Parental Control: V-Chip technology allows parents to block
unsuitable programming for younger viewers.
Digital Visual Interface (DVI-HDTV): Can accommodate a copy-
protected digital connection (HDCP*) to other devices (such as digital
set-top boxes) that have compatible interfaces. The DVI-HDTV input
terminal is compliant with the EIA-861 standard and is not intended for
use with personal computers.
* High-bandwidth Digital Content Protection
(Continued)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Introducing the Sony LCD Projection TV
❑
Component Video Inputs: Offers the best video quality for DVD
(480p, 480i) and Digital Set-top box (1080i, 720p, 480p, 480i)
connections.
❑
❑
❑
❑
S-VIDEO Inputs: Provides a high-quality image for connected
equipment.
Favorite Channel Preview: Preview up to six-teen favorite channels
without leaving the current channel.
Wide Screen Mode: Allows you to watch 4:3 normal broadcasts in
wide screen mode (16:9 aspect ratio).
Auto Wide: Allows you to select the wide screen mode automatically.
Using This Manual
We recommend that you carefully review the contents of the following three
sections in the order shown to ensure that you fully understand the operation
of your new LCD projection TV.
1 Installing and Connecting the LCD Projection TV
This section guides you through your initial setup. It shows you how to
install your LCD projection TV, to connect your new components and to
connect the antenna and cable.
2 Using the Features
This section shows you how to begin using your new LCD projection
TV. It also shows you how to use your remote control functions.
3 Using the menus
This section teaches you how to access on-screen menus and adjust your
LCD projection TV settings.
Instructions in this manual are written for the remote control. Similar
controls are also found on the LCD projection TV console.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Introducing the Sony LCD Projection TV
Enjoying Your LCD Projection TV
Projection lamp
Indicators
Screen
Indicators
The indicators show the current status of your LCD projection TV. If the
LAMP indicator flashes, see “Flashing Indicators on the Front of the
Screen
To minimize screen reflection, its surface has a special coating. Read the
cleaning.
Inappropriate cleaning methods could damage the finishing.
Projection lamp
Your LCD projection TV uses a projection lamp as its light source. Note the
following:
❑
After turning on your LCD projection TV, it may take a while before the
picture appears (1 minute or less).
❑
When the projection lamp wears out, the screen image becomes dark.
Replace the lamp with a new Sony XL-2100U replacement lamp (not
supplied).
✍ Be sure to attach the lamp cover securely; otherwise, your LCD
✍ The light emitted from the lamp is quite bright when your LCD projection
TV is in use. To avoid eye discomfort or injury, do not look into the
housing when the power is on.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Introducing the Sony LCD Projection TV
Notes on the LCD
Projection TV
To enjoy clear pictures
❑
Be sure not to allow sunlight or light from a lamp to shine directly onto
the screen.
❑
The screen surface is easily scratched. Do not rub, touch, or tap it with a
On moisture condensation
❑
If your LCD projection TV is transported directly from a cold to a warm
location, is placed in a humid room, or if the room temperature changes
suddenly, the picture may be blurred or show poor color. This is
because moisture has condensed on the lenses inside. If this happens,
leave the power on and let the moisture evaporate before using your
LCD projection TV.
When the LCD projection TV will not be used for a long period of time
❑
Turn off the main power on the front of your LCD projection TV before
going to sleep or going out. Disconnect the AC plug if idle for more
than 7 days.
When turning off the power
❑
Be sure to turn off the power switch on the main unit or on the remote
control. After turning off the power, the fan will continue to blow for
about two minutes. Be sure to wait for several minutes after turning the
power off when unplugging from the outlet or switching the breaker off.
When carrying the LCD projection TV
Disconnect the connections.
❑
Use of the Cleaning
Cloth
To remove dust from the front of the screen, wipe with the supplied Cleaning
Cloth.
✍ Do not use any type of abrasive pad, alkaline cleaner, scouring powder,
window cleaners or solvent such as alcohol or benzene. Otherwise, this
type of contact may result in a damaged screen.
✍ To clean the screen, please use the supplied Cleaning Cloth lightly
moistened with water diluted mild detergent solution. Do not apply heavy
press when cleaning.
✍ The supplied Cleaning Cloth is washable with warm water and a mild
detergent solution, and can be used repeatedly.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Introducing the Sony LCD Projection TV
Replacing the Lamp
The projection lamp has a limited life which illuminates the picture.
If the screen becomes dark, the color looks unusual, or the LAMP indicator
on the front of the LCD projection TV flashes, it is time to replace the lamp
with a new one (not supplied).
WARNING
Electric appliances can cause fire or high temperature, resulting in injury
or death. Be sure to follow the instructions below.
❑
❑
❑
Use a Sony XL-2100U replacement lamp (not supplied) for
replacement. Failure to do so may damage the LCD projection TV.
Do not remove the lamp for any purpose other than replacement.
Failure to do so may cause fire or a skin burn.
Before replacing the lamp, turn the power off on the main unit, then
several minutes later, unplug the power cord. (The cooling fan will
continue to blow for about two minutes after turning the power off.)
❑
Before replacing the lamp, let it cool down completely, as the surface of
the lamp remains extremely hot for at least 30 minutes after the power
has been turned off.
❑
❑
❑
Do not leave the removed lamp near flammable materials or within the
reach of children.
Do not pour water onto the removed lamp, or put any object inside the
lamp. Doing so may cause the lamp to burst.
Do not put flammable materials and metal objects inside the lamp
receptacle of the LCD projection TV after removing the lamp. Doing so
may cause fire or electrical shock. Also, be sure not to touch the
receptacle, because it may cause a skin burn.
❑
❑
Mount the new lamp securely, otherwise the screen may become dark,
or it may cause a fire.
Do not touch the glass with your fingers on the new lamp.
The Used Lamp
The used lamp contains Mercury, Dispose According to Local, State or
Federal Laws.
✍ Do not touch the front glass of a new lamp or the glass of the lamp
receptacle. This may reduce picture quality or lamp life.
(Continued)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Introducing the Sony LCD Projection TV
1 Turn off the power switch on the LCD projection TV and after several
minutes, unplug the power cord.
(The cooling fan will continue to blow for about two minutes after
turning the power off.)
✍ Do not touch the front glass of a new lamp or the glass of the lamp
receptacle. This may reduce picture quality or lamp life.
2 Unplug the power cord after turning off the main power. Wait at least 30
minutes to allow the lamp to cool down before replacing it.
Take the new lamp out of the box.
3 Loosen the screws on the rear side panel.
4 Remove the front panel.
5 Loosen the screw with a coin or similar object to remove the lamp cover.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Introducing the Sony LCD Projection TV
6 Loosen the two screws that secure the lamp, then pull out the lamp.
The lamp is very hot immediately after use. Never touch the front glass
of the lamp or the surrounding parts.
Loosen the two screws with the
hex key supplied with the lamp.
Hold the handle and pull
straight out.
✍ After it has cooled, place the removed lamp into the empty box of the
replacement lamp. Never put the removed lamp into a plastic bag.
7 Mount the new lamp.
Be sure to attach the new lamp securely.
Tighten the two screws securely in the
order of 1 to 2, as shown in the
illustration using the supplied hex key.
Mount the new lamp securely
into the lamp receptacle.
8 Mount the lamp cover and tighten the screw.
Make sure that the lamp cover is mounted securely, otherwise the power
will not turn on.
Match the projection of the right side of the lamp cover with the hole of the
unit, and replace the lamp cover as it was.
(Continued)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Introducing the Sony LCD Projection TV
✍ If the lamp cover is not mounted securely, the self-diagnostic
function works and the POWER/STANDBY indicator flashes for three
9 Mount the front panel securely.
Press firmly.
10 Mount the rear side panel and tighten the screws.
✍ Consult your Sony dealer for a Sony XL-2100U replacement lamp.
✍ Take great care when replacing the lamp or plugging in/unplugging
the connecting cords. If you handle them roughly, the LCD
projection TV may fall or be moved, and the TV stand or floor
surfaces may be scratched.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the LCD
Projection TV
Contents
The box contains your new LCD projection TV, a remote control and two
AA batteries. No peripheral cables are included. If you intend to add
additional equipment to your LCD projection TV, please check the hookup
instructions for your desired setup before you begin. You may need to
purchase cables and/or splitters to complete the hookup properly.
Inserting Batteries into the Remote Control
Insert two size AA batteries (supplied) by matching the + and – on the
batteries to the diagram inside the battery compartment.
✍ Remove the batteries to avoid damage from possible battery leakage
whenever you anticipate that the remote control will not be used for an
extended period.
✍ Handle the remote control with care. Avoid dropping it, getting it wet, or
placing it in direct sunlight, near a heater, or where the humidity is high.
✍ Your remote control can be programmed to operate most video
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the LCD Projection TV
Carrying Your LCD Projection TV
Carrying the LCD projection TV requires at least two people. Do not grasp
the pedestal or the front panel of the LCD projection TV, otherwise these
parts might break off.
When moving the LCD projection TV, support the hole on the lower portion
with one hand while grasping the top part with the other hand, as shown in
the illustration below.
Do not grasp the pedestal
or the front panel of the
LCD projecttion TV.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the LCD Projection TV
To Prevent the LCD Projection TV from Falling Down
Pay special attention to children around the LCD projection TV. If children
should climb onto or push the LCD projection TV or its stand, it may fall
down.
As a protective measure, secure the LCD projection TV as follows.
Using the LCD projection TV stand with support belts
❑
You can also use the LCD projection TV stand SU-GW1 (for KF-50/
60WE610, not supplied), SU-GW2 (for KF-42WE610, not supplied)
with support belts.
When Installing Your LCD Projection TV Against a Wall
Keep your LCD projection TV at least 10 cm (4 inches) from the wall.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the LCD Projection TV
Recommended Viewing Area
The picture quality may be affected by your viewing position.
For the best picture quality, install your LCD projection TV within the areas
shown below.
Sit at least 1.8 m (approx. 5.9 ft) for KF-42WE610, 2.0 m (approx. 6.6 ft.)
for KF-50WE610 or 2.2 m (approx. 7.2 ft.) for KF-60WE610 away from
your LCD projection TV, and within 60° of the vertical viewing area, and
130° of the horizontal viewing area.
Horizontal Viewing
Area
min.
i
n
.
2.2 m (approx. 7.
.
2
min.
m
i
n
(
a
.
2.0 m (approx.
p
.
p
r
0
min.
m
(
0
o
x
.
i
60"
"
n
0
.
a
"
1.8 m (approx.
7
.
p
.
8
2 ft.)
p
r
m
f
t
.
)
o
x
.
50"
(
0
a
"
6.6 ft.)
p
.
6
p
r
f
o
x
402"
t
.
)
.
5.9 ft.)
.
9
f
t
.
)
65˚
65˚
Vertical Viewing
Area
min.
min.
2.2 m (approx.
60"
7.2 ft.)
0
"
i
n
.
2.0 m (approx.
.
0
m
(
a
p
"
p
r
o
x
.
50"
6.6 ft.)
min. 1.8 m ( 0
.
6
i
n
f
.
t
.
1
)
.
8
m
(
approx.
p
p
r
o
x
.
402"
5.9 ft.)
0
"
.
9
f
t
.
)
30˚
30˚
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the LCD Projection TV
LCD Projection TV Connectors
LCD Projection TV
Front and Rear Side
Connectors
How to open the front panel
To open
OPEN
Push up.
Item
Description
2 MEMORY STICK When lit, indicates that the Memory Stick is being read.
ACCESS LED
(Do not remove the Memory Stick when the indicator is
lit.)
(Continued)
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the LCD Projection TV
Rear of LCD projection TV
Front left side of LCD projection TV
VIDEO 2 INPUT
VIDEO
L(MONO)–AUDIO–R
S VIDEO
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the LCD Projection TV
Description
Connection
1 DVI-HDTV VIDEO Can accommodate a copy-protected digital connection
*
AUDIO R/L
(HDCP ) to other devices (such as digital set-top boxes)
that have compatible interfaces. The DVI-HDTV input
terminal is compliant with the EIA-861 standard and is not
intended for use with personal computers. See the
instruction manual that came with your equipment for
details about connecting and using it with the LCD
projection TV.
(VIDEO 7 IN)
2 S VIDEO
(Rear and front)
Connects to the S VIDEO OUT jack of your VCR or other
S VIDEO-equipped video component. Provides better
picture quality than the VHF/UHF jacks or the Video IN
jack.
3 VIDEO/
Connects to the audio and video OUT jacks on your VCR
or other video component. A fourth video input (VIDEO 2)
is located on the side panel of the LCD projection TV.
(L/R) AUDIO
(Rear and front)
4 HD/DVD IN (1080i, Connects to your DVD player’s or Digital Set-top box’s
720p, 480p, 480i) component video (Y, PB, PR) and audio (L/R) jacks.
5 AUDIO OUT
(VAR/FIX)
Connects to the left and right audio inputs of your audio or
video component.
L (MONO)/R
6 CONTROL S
To control other Sony equipment with the LCD projection
TV's remote control, connect the CONTROL S IN jack of
the equipment to the CONTROL S OUT jack on the LCD
projection TV with the CONTROL S cable.
IN/OUT
To control the LCD projection TV with a remote control
for another Sony product, connect the CONTROL S OUT
jack of the equipment to the CONTROL S IN jack on the
LCD projection TV with the CONTROL S cable.
7 AUX
Allows you to view local and cable channels if your cable
provider does not feature local channels. You can switch
between local and cable channels easily by pressing ANT
on the remote control. Devices connected to the AUX input
cannot be viewed in Twin View.
8 VHF/UHF (Primary Connects to your VHF/UHF antenna or cable.
RF input)
9 TO CONVERTER This is a VHF/UHF OUT jack that lets you set up your
LCD projection TV to switch between scrambled channels
(through a cable box) and normal cable channels (CATV).
Use this jack instead of a splitter to get better picture
quality when switching between scrambled and
unscrambled cable channels.
*
High-bandwidth Digital Content Protection
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the LCD Projection TV
Connector Types
You may find it necessary to use some of the following connector types
during set up.
Coaxial cable
Standard TV cable and antenna cable
Plug Type
Push into connection.
Screw-on Type
Screw into connection.
S Video cable
High quality video cable for enhanced picture quality
Align guides and push into
connection.
Audio/Video cable
Push into connection.
Video - Yellow
Audio (Left) - White
Audio (Right) - Red
Some DVD Players are equipped with the following three video connectors:
Y - Green
PB (CB, Cb or B–Y) - Blue
PR (CR, Cr or R–Y) - Red
CONTROL S cable
CONTROL S connections are exclusive to Sony products and allow greater
control of all Sony equipment.
Push into connection.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the LCD Projection TV
Basic Connections (Connecting Cable TV or Antenna)
Connecting Directly
to Cable or an
Antenna
The connection you choose depends on the cable found in your home. Newer
homes are equipped with standard coaxial cable (see A); older homes
probably have 300-ohm twin lead cable (see B); other homes may contain
both (see C).
A
VHF Only or VHF/UHF or Cable
75-ohm coaxial
cable
Rear of LCD projection TV
VHF/UHF
B
VHF Only or UHF Only or VHF/UHF
300-ohm twin lead cable
Rear of LCD projection TV
VHF/UHF
Antenna connector
C
VHF and UHF
75-ohm coaxial cable
Rear of LCD projection
TV
VHF/UHF
U/V Splitter
(not supplied)
300-ohm twin lead cable
✍ It is highly recommended to connect the antenna using a 75-ohm coaxial
cable to get optimum picture quality. A 300-ohm twin lead cable can be
easily affected by radio noise and the like, resulting in signal
deterioration. If you use a 300-ohm twin lead cable, keep it away as far
as possible from the LCD projection TV.
✍ Do not use an indoor antenna because it is especially susceptible to
radio noise.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the LCD Projection TV
Cable and Antenna
If your cable provider does not feature local channels, you may find this set
up convenient.
CATV cable
AUX
(No connection to
TO CONVERTER)
Rear of LCD projection TV
TO
CONVERTER
Antenna cable
VHF/UHF
Select CABLE or antenna (ANT) mode by pressing ANT on the remote
control.
✍ To receive channels with an antenna, you need to turn your Cable to Off
Cable Box
Connections
Cable Box and Cable
This is the preferred basic cable TV hookup to use if:
❑
Your cable TV company scrambles some channels, but not all of them
(pay channels vs. regular cable channels) and you need to use a cable
box, and
❑
You want to enjoy the Twin View feature.
With this setup you can:
❑
Use the LCD projection TV remote control to change channels using
your cable box when the signal is scrambled.
❑
Use the LCD projection TV remote control to change channels using
your LCD projection TV when the signal is not scrambled. (Your LCD
projection TV’s tuner provides a better signal than the cable box.)
❑
Use the Twin View feature. (When all channels are routed through your
cable box, only one channel is sent to the LCD projection TV, so you
can not use the Twin View feature for your cable box.)
1 Connect the Cable TV cable to the LCD projection TV’s VHF/UHF
jack.
2 Using a coaxial cable, connect the LCD projection TV’s TO
CONVERTER jack to the cable box’s IN jack. The LCD projection
TV’s internal converter allows you to switch between unscrambled
signals coming straight into the LCD projection TV and scrambled
signals coming in through the cable box, eliminating the need for an
external splitter.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the LCD Projection TV
3 Using a coaxial cable, connect the cable box’s OUT jack to the LCD
projection TV’s AUX jack.
Cable box
Rear of LCD
projection TV
IN
AUX
OUT
TO
CONVERTER
75-ohm coaxial cable (not supplied)
CATV cable (unscrambled channels)
Signal
VHF/UHF
✍ Pressing ANT on the remote control switches between the channels
coming in through the cable box (scrambled) and those coming directly
to the TV (unscrambled).
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the LCD Projection TV
Cable Box Only
Use this hookup if:
❑
You subscribe to a cable TV system that uses scrambled or encoded
signals requiring a cable box to view all channels, and
❑
You do not intend to hook up any other audio or video equipment to
your LCD projection TV.
When all channels are routed through your cable box, only one unscrambled
channel is sent to the LCD projection TV, so you cannot use the Twin View
feature. If some channels are scrambled, but others are not, consider using
1 Connect the coaxial connector from your cable service to the cable
box’s IN jack.
2 Using a coaxial cable, connect the cable box’s OUT jack to the LCD
projection TV’s VHF/UHF jack.
Cable
Rear of LCD projection TV
VHF/UHF
IN
OUT
Cable box
✍ Your Sony remote control can be programmed to operate your cable box
✍ To change channels using the cable box, set your LCD projection TV to
channel 3 or 4 depending on the cable box channel output. If you will be
controlling all channel selection through your cable box, consider using
the Channel Fix feature to set your LCD projection TV to channel 3 or 4
z
Setting the Channel Fix feature in the Channel menu (see “Using the
Channel Menu” on page 76), ensures that you do not accidentally switch
the channels using your LCD projection TV.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the LCD Projection TV
Connecting a VCR and Cable
Use this hookup if:
❑
You have cable TV that does not require a cable box.
Disconnect all power sources before making any connections.
1 Connect the cable TV cable to the VCR’s IN jack.
2 Using a coaxial cable, connect the VCR’s OUT jack to the LCD
projection TV’s VHF/UHF jack.
3 Using AUDIO and S VIDEO cables, connect the VCR’s Audio and
S Video OUT jacks to the LCD projection TV’s AUDIO and S VIDEO
IN jacks.
Rear of LCD projection TV
VIDEO (yellow)
AUDIO-L (white)
S VIDEO
Coaxial cable
AUDIO-R (red)
VCR
Cable
VC-810S/820S
(not supplied)
✍ If your VCR is not equipped with S VIDEO, use a VIDEO cable (yellow)
instead of the S VIDEO cable.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the LCD Projection TV
Connecting a VCR and Cable Box
Use this hookup if:
❑
Your cable TV company scrambles some channels, but not all of them
(pay channels vs. regular cable channels) and you need to use a cable
box, and
❑
You want to enjoy the Twin View feature.
With this setup you can:
❑
Use the LCD projection TV remote control to change channels on your
cable box when the signal is scrambled. To program your Sony remote
control to operate your cable box, see “Programming the Remote
❑
❑
Use the LCD projection TV remote control to change channels using
your LCD projection TV when the signal is not scrambled. Your LCD
projection TV’s tuner provides a better signal than the cable box.
Use the Twin View feature. (When all channels are routed through your
cable box, only one signal is sent to the LCD projection TV, so you
cannot use the Twin View feature.)
Disconnect all power sources before making any connections.
1 Connect the Cable TV cable to the LCD projection TV’s VHF/UHF
jack.
2 Using a coaxial cable, connect the LCD projection TV’s TO
CONVERTER jack to the cable box’s IN jack. The LCD projection
TV’s internal converter allows you to switch between unscrambled
signals coming straight into the LCD projection TV and scrambled
signals coming in through the cable box, eliminating the need for an
external splitter.
3 Using a coaxial cable, connect the cable box’s OUT jack to the VCR’s
IN jack.
4 Using AUDIO and S VIDEO cables, connect the VCR’s AUDIO and S
VIDEO OUT jacks to the LCD projection TV’s AUDIO and S VIDEO
IN jacks.
5 Using a coaxial cable, connect the VCR’s OUT jack to the LCD
projection TV’s AUX jack.
✍ To view scrambled channels, set your LCD projection TV to AUX 3 or 4
(depending on your cable box output). Change channels using your
cable box.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the LCD Projection TV
VCR
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
S VIDEO
Coaxial cable
VC-810S/820S
(not supplied)
VIDEO (yellow)
AUDIO-L (white)
AUDIO-R (red)
S VIDEO
Cable box
Rear of LCD projection TV
Coaxial cable
✍ If your VCR is not equipped with S VIDEO, use a VIDEO cable (yellow)
instead of the S VIDEO cable.
✍ You will not be able to change channels on the VCR. Set your LCD
projection TV and VCR to channel 3 or 4, depending on your cable box
channel output.
✍ Pressing ANT on the remote control switches between the channels
coming in through the cable box (scrambled) and those coming directly
to the LCD projection TV (unscrambled).
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the LCD Projection TV
Connecting Two VCRs for Tape Editing
If you connect two VCRs, you can record from one VCR to the other while
using your LCD projection TV to monitor what is being recorded.
Disconnect all power sources before making any connections.
1 Using AUDIO and VIDEO cables, connect the playback VCR’s Audio
and Video OUT jacks to the recording VCR’s Audio and Video IN
jacks.
2 Using AUDIO and VIDEO cables, connect the recording VCR’s
AUDIO and Video OUT jacks to the LCD projection TV’s AUDIO and
VIDEO IN jacks.
Rear of LCD projection TV
VCR (playback)
VCR (recording)
AUDIO-R (red)
AUDIO-L (white)
VIDEO (yellow)
VC-810S/820S (not supplied)
✍ To perform tape editing, set the LCD projection TV to the video input
intended for playback by pressing TV/VIDEO on the remote control.
✍ You may need to change the video input on your VCR. Consult your
VCR’s operating manual for instructions.
✍ If your VCRs have an S VIDEO jack: For best picture quality, use an
S VIDEO connection instead of the yellow video cable on your combined
A/V cable.
Using an S VIDEO cable, connect the playback VCR’s S VIDEO OUT jack
to the recording VCR’s S VIDEO IN jack. S VIDEO does not provide audio,
so audio cables must be connected to provide sound.
✍ You cannot record signals from equipment connected to the Y, PB, PR
input.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the LCD Projection TV
Connecting a Satellite Receiver
Disconnect all power sources before making any connections.
1 Connect the satellite antenna cable to the satellite receiver’s
SATELLITE IN jack.
2 Using AUDIO and S VIDEO cables, connect the satellite receiver’s
AUDIO and S VIDEO OUT jacks to the LCD projection TV’s AUDIO
and S VIDEO IN jacks.
3 Connect a coaxial cable from your cable or antenna to the LCD
projection TV’s VHF/UHF jack.
✍ If your satellite receiver is not equipped with S VIDEO, use a VIDEO cable
(yellow) instead of the S VIDEO cable.
Rear of LCD projection TV
Coaxial
cable
VIDEO (yellow)
AUDIO-L (white)
AUDIO-R (red)
S VIDEO
Satellite receiver
Satellite
antenna
cable
VC-810S/820S (not supplied)
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the LCD Projection TV
Connecting a Satellite Receiver with a VCR
Disconnect all power sources before making any connections.
1 Connect the satellite antenna cable to the satellite receiver’s
SATELLITE IN jack.
2 Connect the CATV cable to the VCR’s VHF/UHF IN jack.
3 Using a coaxial cable, connect the VCR’s OUT jack to the LCD
projection TV’s VHF/UHF jack.
4 Using AUDIO and S VIDEO cables, connect the satellite receiver’s
AUDIO and S VIDEO OUT jacks to the VCR’s AUDIO and S VIDEO
IN jacks.
5 Using AUDIO and S VIDEO cables, connect the VCR’s AUDIO and S
VIDEO OUT jacks to the LCD projection TV’s AUDIO and S VIDEO
IN jacks.
Satellite
antenna
cable
Rear of LCD projection TV
Satellite receiver
VC-810S/820S
(not supplied)
AUDIO-R
S VIDEO
(red)
VCR
AUDIO-L
(white)
VIDEO
Cable
(yellow)
Coaxial cable
VC-810S/820S (not
supplied)
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the LCD Projection TV
✍ Be sure your VCR’s video input is set correctly. Consult your VCR’s
operating manual for instructions.
✍ Use TV/VIDEO to select
- VIDEO 1 to watch satellite TV or the VCR (your VCR must be turned on).
- VHF/UHF to watch cable TV.
✍ If your VCR or satellite receiver is not equipped with S VIDEO, use a
VIDEO cable (yellow) instead of the S VIDEO cable.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the LCD Projection TV
Connecting an Audio Receiver
Disconnect all power sources before making any connections.
Using audio cables, connect the LCD projection TV’s AUDIO OUT (VAR/
FIX) jacks to the audio receiver’s audio LINE IN jacks.
Rear of LCD projection TV
AUDIO-L (white)
AUDIO-R (red)
RK-C310/C320/C330
(not supplied)
Line
input
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the LCD Projection TV
Connecting a DVD Player with Component
Video Connectors
This is the preferred hookup to use if:
Your DVD player has component (Y, B-Y, R-Y) jacks.
❑
Disconnect all power sources before making any connections.
1 Using three separate component video cables, connect the DVD player’s
Y, B-Y and R-Y jacks to the Y, PB and PR jacks on the LCD projection
TV. Use the HD/DVD IN 5 or 6 connections.
✍ The Y, B-Y and R-Y jacks on your DVD player are sometimes labeled
Y, CB and CR, or Y, PB and PR. If so, connect the cables to like colors.
2 Using an audio cable, connect the DVD player’s Audio OUT jacks to
the LCD projection TV’s AUDIO IN jacks. Be sure to use the same row
of inputs that you used for the video connection (HD/DVD IN 5 or 6).
VMC-10 (not supplied)
PB
PR
Y
Rear of LCD
projection TV
DVD player
AUDIO-R (red)
AUDIO-L
(white)
RK-C310/C320/C330
(not supplied)
✍ To take advantage of the Wide Screen modes, set the TV’s aspect
ratio to 16:9 on your DVD player. For details, refer to the operating
instructions supplied with your DVD player.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the LCD Projection TV
Connecting a DVD Player with A/V Connectors
Use this hookup if:
❑
Your DVD player does not have component (Y, PB, PR) jacks.
✍ If your DVD player has video component output connectors: for best
picture quality use the connection described on page 37.
Disconnect all power sources before making any connections.
1 Using audio cables, connect the DVD player’s Audio OUT jacks to the
LCD projection TV’s AUDIO IN jacks.
2 Using an S VIDEO cable, connect the DVD player’s S VIDEO jack to
the LCD projection TV’s S VIDEO jack.
Rear of LCD projection TV
S VIDEO
DVD player
AUDIO-R (red)
AUDIO-L (white)
RK-C310/C320/C330 (not supplied)
✍ To take advantage of the Wide Screen modes, set the TV’s aspect ratio to
16:9 on your DVD player. For details, refer to the operating instructions
supplied with your DVD player.
✍ Use TV/VIDEO on the remote control to switch between the VCR, DVD
player and cable TV inputs.
✍ If your VCR is not equipped with S VIDEO, use a VIDEO cable (yellow)
instead of the S VIDEO cable.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the LCD Projection TV
Connecting a Digital TV Receiver with component connectors
Disconnect all power sources before making any connections.
z
Be sure to read the Set-top box manual.
1 Using three separate component video cables, connect the Digital TV
Set-top box’s Y, PB and PR jacks to the LCD projection TV.
✍ The Y, PB and PR jacks do not provide audio, so audio cables must
be connected to provide sound.
✍ Component video connection is necessary to view 480i, 480p, 720p,
and 1080i formats. You may also use the S VIDEO or Composite
Video connections, however, component video (Y, PB, PR) will
provide the best picture quality for all format types.
2 Using an audio cable, connect the Digital TV Set-top box’s Audio OUT
jacks to the LCD projection TV’s AUDIO IN jacks.
Y
PB
Rear of LCD projection TV
PR
VMC-10
(not supplied)
Digital TV Set-top box
AUDIO-R
AUDIO-L
(white)
RK-C310/C320/C330 (not supplied)
(red)
✍ You cannot record the signal from any equipment connected into the
Y, PB and PR connectors.
✍ This LCD projection TV is not compatible with digital TV receivers
configured with RGB or VGA output connectors.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the LCD Projection TV
Connecting a Digital TV Receiver with DVI-HDTV connector
Disconnect all power sources before making any connections.
z
Be sure to read the Set-top box manual.
1 Using a DVI-D single link cable, connect the Digital TV Set-top box’s
DVI-HDTV connector to the LCD projection TV.
✍ The DVI-HDTV VIDEO connector does not provide audio, so audio
cables must be connected to provide sound.
2 Using an audio cable, connect the Digital TV Set-top box’s Audio OUT
jacks to the LCD projection TV’s DVI-HDTV AUDIO jacks.
DVI-HDTV IN VIDEO
DVI-D single link cable
AUDIO-L (white)
AUDIO-R (red)
Rear of LCD projection TV
Digital TV Set-top box
VIDEO OUT
(480i)
VIDEO OUT
(1080i/720p/480p)
1
2
AUTHORIZED
SERVICES ONLY
Y
OPTICAL
AUDIO
OUT
RGB OUT
DVI-HDV OUT
(1080i/720p/480p)
PB
L1
R1
2
R2
TYPE
PR
OPTICAL S. VIDEO
(1080i/720p/480p)
AUIO OUT
RK-C310/C320/C330
(not supplied)
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the LCD Projection TV
Connecting a Camcorder
For easy connection of the camcorder, the LCD projection TV has front
Audio and Video inputs (shown below). However, if you prefer, you can also
connect the camcorder to the LCD projection TV’s rear Audio and Video IN
jacks.
Using AUDIO and S VIDEO cables, connect the camcorder’s Audio and
S VIDEO OUT jacks to the LCD projection TV’s AUDIO and S VIDEO IN
jacks.
✍ If you have a mono camcorder, connect its left audio output to the LCD
projection TV’s AUDIO L (MONO) jack.
✍ If your camcorder is not equipped with S VIDEO, use a VIDEO cable
(yellow) instead of the S VIDEO cable.
VIDEO 2 IN
VIDEO
L(MONO) AUDI
R
S VIEO
AUDIO-R (red)
S VIDEO
AUDIO-L (white)
VIDEO (yellow)
A/V output
VC-810S/820S
(not supplied)
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the LCD Projection TV
Using the CONTROL S Feature
CONTROL S allows you to control your LCD projection TV system and
other Sony equipment with one remote control. In addition to allowing you
to control multiple devices with one remote control, the CONTROL S
feature allows you to always point your remote control at your LCD
projection TV, instead of having to point it at the other equipment, which
might be hidden or out of direct line of sight.
Rear of LCD projection TV
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Installing and Connecting the LCD Projection TV
Setting Up the LCD projection TV Automatically
After you finish connecting your LCD projection TV, you can run Auto
Setup to set up your channels. The Auto Setup screen appears when you turn
your LCD projection TV on for the first time after installing it. If you do not
want to set up the channels at this time, you can do it later by using the Auto
✍ The Auto Setup feature does not apply for installations that use a cable
box for all channel selection.
Using Auto Setup
1 Press POWER on the front panel of your LCD projection TV or on the
remote control to turn on the LCD projection TV.
2 Press FUNCTION on the remote control until the TV indicator lights
up.
3 Press CHANNEL+ on your LCD projection TV to run Auto Setup, or
press CHANNEL– to exit. If you use the channel buttons on your remote
CH
control, be sure to use
.
LCD projection TV front panel
CHANNEL
VOLUME
TV/VIDEO
✍ You can run Auto Program by selecting it in the Channel menu, as
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Features
Using the Remote Control
The following table describes the buttons on the remote control that are for
more advanced functions.
Button Descriptions
Button
Description
1 VCR/DVD
2 MUTING
Press to turn on and off the VCR or DVD player.
VCR/
DVD
SAT/
CABLE
POWER
DISPLAY
MUTING
Press to mute the sound. Press again or press VOL + to
restore the sound.
MODE
PICTURE WIDE
3 WIDE MODE Press to step through the wide screen modes: Wide Zoom,
4 PICTURE
Press repeatedly to step through the available video picture
modes: Vivid, Standard and Pro Mode. Also available in
the Video menu. For details, see “Selecting Video Options”
MODE
JUMP
ENT
FAVORITES
MENU
5 JUMP
Press to jump back and forth between two channels. The
LCD projection TV alternates between the current channel
and the last channel that was selected.
SAT/
VCR/DVD
TV
CABLE
FUNCTION
7 V/v/B/b
When the menu is displayed, move the on-screen cursor.
TV/VIDEO
8 FUNCTION
Select the equipment (TV, SAT/CABLE, VCR/DVD) that
you want to operate.
FREEZE /TV/SAT ANT
GUIDE
9 X/x/m/B/
X: Pause
VOL
CH
M/z
x: Stop
m: Rewind
B: Play
CODE SET RESET SLEEP MTS/SAP
M: Fast-Forward
z: Record by pressing z and B
q;
Turns on/off Twin View. For details, see “Using Twin
TV
RM-Y913
qa FREEZE
qs VOL +/–
Freezes the window picture. Press again to restore the
picture.
Adjusts the volume.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Features
Button
Description
qd CODE SET
Use for programming the remote control to operate non-
Sony video equipment. For details, see “Programming the
VCR/
DVD
SAT/
CABLE
POWER
DISPLAY
MUTING
MODE
PICTURE WIDE
qf RESET
Press when in a menu to reset the settings to the factory
defaults.
qg POWER
buttons
Turn on and off the LCD projection TV and other audio/
video equipment you have programmed into the remote
control. For instructions, see “Programming the Remote
(GREEN)
JUMP
ENT
FAVORITES
MENU
qh DISPLAY
Press once to display the current time and channel label (if
set) and channel number. Press again to turn Display off.
qj 0 – 9 and ENT Press 0 - 9 to select a channel, the channel changes after 2
seconds. Press ENT to select immediately.
SAT/
CABLE
VCR/DVD
TV
FUNCTION
qk MENU
Press to display the LCD projection TV on-screen menu.
Press again to exit from the menu.
TV/VIDEO
ql
When the menu is displayed, select the item.
FREEZE /TV/SAT ANT
GUIDE
VOL
CH
w; TV/VIDEO
Cycles through the video equipment connected to your LCD
projection TV’s video inputs: TV
VIDEO 3 VIDEO 4 VIDEO 5, VIDEO 6 and VIDEO 7
Press to display the Memory Stick Menu.
,
VIDEO 1, VIDEO 2,
,
,
.
CODE SET RESET SLEEP MTS/SAP
wa MEMORY
STICK
For details, see “Using the Memory Stick Viewer” on page
55.
ws
Press to scroll an audio option: TruSurround, Simulated,
TV
RM-Y913
and Off.
TV/SAT
wd ANT
Press to select the TV or satellite receiver.
Changes between the VHF/UHF input and the AUX input.
Displays the program guide of your satellite.
Scan through channels.
GUIDE
wf CH +/–
To scan rapidly through the channels, press and
hold down CH+ or CH–.
z
wg MTS/SAP
Press to scroll through the Multi-channel TV Sound (MTS)
options: Stereo, Auto SAP, and Mono.
wh SLEEP
Press repeatedly until the LCD projection TV displays the
time in minutes (15, 30, 45, 60, or 90) that you want the
LCD projection TV to remain on before shutting off
automatically. To cancel Sleep timer, press SLEEP
repeatedly until SLEEP OFF appears. Pressing down
POWER also cancels the Sleep timer and turns off the
power. While the Sleep feature is set, press once to view the
remaining time.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Features
Watching the TV
Many TV features can be accessed directly through the remote control. The
following will explain the function of some of the buttons found on your
remote control.
Buttons for LCD
Projection TV
Operations
1 FUNCTION TV
Press to have the remote control operate the TV. The indicator lights up
momentarily when pressed to show which equipment the remote control is
operating.
2 ANT— (AUX input)
Press to change between the VHF/UHF input and the AUX input.
VCR/
DVD
SAT/
CABLE
POWER
DISPLAY
MUTING
MODE
PICTURE WIDE
3 POWER
Turn the LCD projection TV on and off. If a video input indication (e.g.,
VIDEO 1, VIDEO 2) appears on the screen, press TV/VIDEO or CH +/ – until
a channel number appears.
JUMP
ENT
4 0-9 and ENT
FAVORITES
MENU
Use for direct channel selection. Press 0-9 to select a channel (for example,
to select channel 10, press 1 and 0). The channel will change after 2 seconds,
or you can press ENT for immediate selection.
5 CH +/–
Press to scan through the channels (+ up or – down).
SAT/
CABLE
VCR/DVD
TV
FUNCTION
6 VOL +/–
TV/VIDEO
Press to adjust the volume (+ up or – down).
FREEZE /TV/SAT ANT
GUIDE
7 JUMP
VOL
CH
Press to alternate or jump back and forth between two channels. The LCD
projection TV will jump between the current channel and the last channel
selected.
CODE SET RESET SLEEP MTS/SAP
8 MUTING
Press to mute the sound. “MUTING” will appear on the screen. To restore
the sound, press again or press VOL +.
TV
RM-Y913
9 FREEZE
This is useful when you need to copy down information that appears on the
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Features
0 SLEEP
VCR/
DVD
SAT/
CABLE
POWER
DISPLAY
MUTING
Press repeatedly until the LCD projection TV displays the approximate time
in minutes (15, 30, 45, 60, or 90) that you want the LCD projection TV to
remain on before shutting off automatically.
MODE
PICTURE WIDE
Cancel by pressing SLEEP until “SLEEP OFF” appears.
qa DISPLAY
Press to display the channel number, current time and channel label (if set).
JUMP
ENT
FAVORITES
MENU
To turn the display off, press DISPLAY again.
qs TV/VIDEO
Press repeatedly to scroll through available video inputs: TV, VIDEO 1,
VIDEO 2, VIDEO 3, VIDEO 4, VIDEO 5, VIDEO 6 and VIDEO 7.
SAT/
CABLE
VCR/DVD
TV
If you select Skip as a Video Label in the Setup menu, your LCD projection
FUNCTION
TV/VIDEO
qd MTS/SAP
FREEZE /TV/SAT ANT
GUIDE
Press to scroll through the Multi-channel TV Sound (MTS) options (see
VOL
CH
qf PICTURE MODE
CODE SET RESET SLEEP MTS/SAP
Press PICTURE MODE repeatedly to directly choose one of three different
video modes that best suits the program you are watching.
Vivid: Select for enhanced picture contrast and sharpness.
TV
RM-Y913
Standard: Select to display a standard picture for normal viewing
environments.
Pro: Select to display a picture with minimum enhancements.
When you select each mode, you can also adjust the picture quality (such as
69.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Features
Watching Digital TV
When you have connected the DTV receiver, you can enjoy digital TV
programs. This LCD projection TV is capable of receiving the 1080i, 720p,
480p and 480i digital TV formats.
To view a digital TV program
1 Connect the DTV receiver to DVI-HDTV IN 7, HD/DVD IN 5 or 6 on
2 Press TV/VIDEO to select DVI-HDTV IN 7, HD/DVD IN 5 or 6.
3 Select a digital channel on the DTV receiver. For details, see the
Operating Manual of the DTV receiver.
4 Adjust the volume of the LCD projection TV as necessary.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Features
Using Favorite Channels
The Favorite Channel feature lets you select programs from a list of favorite
channels that you preset.
Creating a List of
Favorite Channels
1 Press MENU to display the Menu.
2 Press B or b to highlight the Channel icon and press
.
3 Press
to select Favorite Channels.
4 Press V or v to highlight a Favorite Channel number (1-16) and press
.
5 Press V or v to highlight a channel you want to assign to the Favorite
Channel number. A preview of the highlighted channel appears in the
upper right of the screen.
Press
to select that channel as a Favorite Channel.
6 To add more channels to your favorites list, repeat steps 4-5.
To clear a Favorite Channel, press V or v to highlight the channel you
want to clear. Press
and then press RESET.
7 Press MENU to exit the Menu.
Displaying a List of
Favorite Channels
1 Press FAVORITES.
The Favorite Channel options appear.
Preview window
Favorites
10
20
36
6
ABC
HBO
MTV
Favorite Channels
FOX
8
CBS
37
40
9
COMED
Exit
2 Press V or v to highlight the channel you want to watch. The program of
that channel appears in the preview window. Press
to select.
✍ When the remote control function is set to other than TV function, you
can display the Favorite Channels. However, you cannot select the
channel by using V or v.
z To assign Channel Labels (e.g., ABC, HBO, MTV, etc.) to channel
numbers, as shown at right, use the Channel Label feature in the Channel
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Features
Using Twin View™
Twin View enables you to watch two programs at the same time. You can
also change the size of both the left and right pictures.
Activating Twin
Pictures
To display twin pictures
1
2
Make sure your LCD projection TV is tuned to
a working channel.
Press
.
To cancel twin pictures
Press again (or press
❑
).
Activating the
Picture
Although two pictures appear on the screen at the same time, only one
picture is active. Change the picture size by using the V or v button. For an
active picture, you can:
❑
❑
❑
Change channels.
Adjust the volume.
Switch the input sources from VHF/UHF to cable by pressing ANT or
TV/VIDEO to switch the video input.
To activate the right picture
❑
Press b.
To activate the left picture
Press B.
❑
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Features
✍ Hookups that affect your ability to use Twin View:
- If you are viewing all channels through the cable box, the Twin
View feature will not work. The cable box only unscrambles one
signal at a time, so the right picture will be the same as the left
picture.
- You can watch a scrambled cable channel and another video
source. Be sure your DVD player, VCR or satellite receiver are
connected to one of the VIDEO IN 1-7 and AUX inputs on the rear
of the LCD projection TV. Pictures from equipment connected to
HD/DVD IN 5 and 6, DVI-HDTV IN 7, and AUX will only appear in
the left picture, not in the right.
Factors Affecting Twin View
❑
If you use a cable box to view all channels, the same channel appears in
both windows because the cable box unscrambles only one channel at a
time.
❑
If you use a cable box, you can view the cable box output in one window
and view a different source (such as a VCR or DVD player) in the
second window by using the TV/VIDEO button.
❑
❑
❑
Sources connected to the AUX, VIDEO 5, VIDEO 6, and VIDEO 7
inputs display in the left window, but not the right.
If you are viewing a 4:3 source and a 16:9 enhanced source (such as a
DVD) side by side, the 4:3 source appears larger.
Twin View does not display channels that are blocked by parental
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Features
Changing the
Picture Size
The zoom feature lets you change the size of the left and right pictures.
To enlarge the left
picture (reduce the
right)
To enlarge the right
picture (reduce the
left)
1 Press B to
activate the left
picture (if not
already
1 Press b to
activate the right
picture (if not
already
activated).
activated).
2 Press V to
enlarge the
picture and v to
reduce the
2 Press V to enlarge
the picture and v
to reduce the
picture.
picture.
✍ When you adjust the twin screen sizes, the LCD projection TV memorizes
the change. The next time you use the Twin View function, the
memorized sizes appear.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Features
Using the Freeze Function
The FREEZE button allows you to temporarily capture a program’s picture.
You can use this feature to write down information such as phone numbers,
recipes, etc.
To use the Freeze function
1 When the program information you want to capture is displayed, press
FREEZE.
2 The LCD projection TV switches to Twin View mode and displays the
“frozen” picture on the right, while the current program continues on the
left.
Frozen picture
Current program
in progress
3 To cancel and return to normal viewing, press FREEZE.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Features
Using Wide Screen Mode
Wide Screen Mode lets you watch 4:3 normal broadcasts in several Wide
Screen Modes (16:9 aspect ratio).
❑
Press WIDE MODE repeatedly to toggle through the following Screen
Mode settings.
z
You can also access the Screen Mode settings in the Screen menu.
Wide Zoom enlarges the 4:3 picture to
fill the 16:9 screen, keeping the original
image as much as possible.
Normal returns the 4:3 picture to its
original size.
Full Mode stretches the 4:3 picture
horizontally only, to fill the 16:9 screen.
Zoom Mode enlarges the 4:3 picture
horizontally and vertically to an equal
aspect ratio that fills the 16:9 screen.
Useful for watching Letterbox movies.
z
When you change channels or inputs, the Screen Mode settings
revert to Wide Zoom (or the 4:3 Default setting in the Wide menu). To
retain the current Screen Mode setting as channels and inputs are
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Memory Stick Viewer
About Memory Stick
Memory Stick (sold separately) is a new, compact, portable, and versatile
Integrated Circuit recording medium with a data capacity that exceeds that
of a floppy disk. Memory Stick is specially designed for exchanging and
sharing digital data among Memory Stick compatible products such as
digital cameras and digital video cameras. Because it is removable, Memory
Stick can also be used for external data storage.
The Memory Stick Viewer on your LCD projection TV allows you to view
still images (JPEG files) and movies (MPEG1 files) stored on Memory Stick
media.
For more information about using Memory Stick media, see “Notes on
✍ "Memory Stick", "Memory Stick PRO", “Memory Stick Duo” and "
"
are registered trademarks of Sony Corporation.
This LCD projection TV's Memory Stick viewer can display still images and
movies that have been recorded on Memory Stick media.
Supported Image
Types
You can view;
❑
JPEG images taken with Sony digital cameras
❑
MPEG1* movies taken with digital cameras and camcorders
* Some variations of MPEG1 movies may not play back correctly.
(Continued)
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Memory Stick Viewer
✍
JPEG stands for “Joint Photographic Experts Group,” which is the
organization that implemented this format. DCF stands for “Design Rules
for Camera File Systems,” which are specifications established by the
Japan Electronic Industry Development Association (JEIDA).
✍ MPEG1 stands for “Motion Picture Experts Group” which is the
organization that implemented this format and is the typical
compression format for movie files.
About Directory and
File Names
Most Sony brand digital still and video cameras automatically record still
images using DCF compliant directory and file names, or record movies
using the directory and file names as shown in the following examples:
Still image files
Example:
Directory Name: /DCIM/100MSDCF
File Name: DSC00001.JPG
Image Directory Name
Image File Names
100MSDCF
DSC00001
DSC00002
DSC00003
Movie files
Example:
Directory Name: /MSSONY/MOML0001
File Name: MOV00001.MPG
Unsupported Image
Types
This LCD projection TV’s Memory Stick viewer cannot display any of the
following:
❑
Images stored in TIFF or any other non-JPEG or non-MPEG
compression format
❑
Images with less than 16 horizontal and/or vertical dots per line
❑
Images with more than 4096 horizontal and/or vertical dots per line
❑
An image processed by a computer may not be displayed correctly.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Memory Stick Viewer
Inserting and Removing a Memory Stick
1
into the Memory Stick slot as illustrated below.
When inserted properly, it should slide in with little resistance and click
into place.
To insert a Memory
Stick
✍
Be sure to insert the Memory Stick in the correct direction. If the
Memory Stick is forced in the wrong way, it may become damaged.
Insert only Memory Stick media into the Memory Stick slot. Attempting
to insert other objects into the slot may damage the LCD projection TV.
Before inserting a Memory Stick Duo into the Memory Stick slot, you
must first insert the Memory Stick Duo into an adaptor (optional).
1 Check that the Memory Stick indicator is off. (When the light is on, this
indicates that the LCD projection TV is reading data from the Memory
Stick.)
To remove a Memory
Stick
(Continued)
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Memory Stick Viewer
2 Push the Memory Stick gently into the slot, and then release it.
The Memory Stick media is ejected.
3 Pull the Memory Stick completely out of the slot.
z
When removing the Memory Stick, do not attempt to just pull it from its
slot.
✍ To protect small children from injury from Memory Stick Media, remove
all Memory Stick media from the LCD projection TV’s Memory Stick slot
and store it in a safe location when it is not in use.
Displaying the Memory Stick Home (Memory Stick Index)
Turn on the your LCD projection TV and insert a Memory Stick that
contains the photo or movie files you want to view. For details on inserting a
The Memory Stick Home appears, which displays thumbnails of still image
and movie files stored on the Memory Stick.
When MEMORY STICK
Stick Home also appears.
on the remote control is pressed, the Memory
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Memory Stick Viewer
Highlighted thumbnail
Memory Stick Home
Memory Stick
menus
Slide Show
Options
Filter : Still
Select Folder
Digi. Cam. Mode
Digi. Cam. Mode
(Digital Camera
Mode) indication
Thumbnails of still
images and
movies
No
:
File
:
Size :
Date :
Move :
Select :
Information on the highlighted image or movie
About the Icons on the Thumbnail Images
(Movie)
(Protect)
Indicates the thumbnail is a movie (MPEG1) file.
Indicates the thumbnail is protected. Protected files
cannot be changed or deleted. For details, see “Using
(Relative file)
Indicates another file named the same in the last four
digits exists in the Memory Stick.
About the Digi. Cam. Mode (Digital Camera Mode)
Digi. Cam. Mode displays all JPEG and MPEG1 files recorded with the
DCF compliant digital cameras. When you set the Digi. Cam. Mode to Off,
the data of selected files or all files with the extension .jpg or .mpg can be
displayed. The Memory Stick viewer of this projection TV sets Digi. Cam.
Mode to On at the factory. When Digi. Cam. Mode is set to On, the
maximum 2000 pieces of still images and/or movies can be displayed.
When you want to display more than 2000 pieces of still images and/or
About caution displays
This image data is the JPEG or MPEG1 format that is not-compatible.
There is the thumbnail but it is not DCF-compatible.
There is the image data but the thumbnail is broken.
The image data is broken.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Memory Stick Viewer
Using the Memory Stick Home
To Do This …
Do This …
Select the thumbnails
Press ,.
Move the highlight to an image Press M m < ,.
or movie thumbnail
Display the previous or next
page of thumbnails
1 Select a file in the bottom row.
2 Press m. To go back to the previous page, press
M.
or
1 Select a file in the right-most column.
2 Press , to select a slider.
3 Press m. To go back to the previous page, press
M.
Display the Index menu of the Press
. For details on each Index menu, see
to access additional options
Move the highlight to the
Memory Stick Home menus to
access additional options
1 Press M or m to select Slideshow, Options or
Select Folder.
2 Press
.
For details on these options, see “Memory Stick
Exit Memory Stick Viewer
Press MEMORY STICK
on the remote
control.
Using the Index
Menu
When you select a still image or movie from the Memory Stick Home (see
to select the desired option.
Still Image Index Menu
Memory Stick Home
Slide Show
Options
Filter : Still
Full Screen
Select Folder
Slide Show
Still Image Index
Digi. Cam. Mode
Menu
Protect
Rotate
Delete
Close
No : 123/1234
Size : 1024x768
File : 100MSDCF/SJP0001.JPG
Date : MAY/31/2003 1:08PM
Move :
Back :
Select :
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Memory Stick Viewer
Movie Index Menu
Memory Stick Home
Slide Show
Options
Filter : Still
Movie Player
Slide Show
Select Folder
Movie Index Menu
Digi. Cam. Mode
Protect
Rotate
Delete
Close
No : 124/1234
Size : 320x240
File : 100MSDCF/BASEBALL.MPG
Date : MAY/31/2003 1:08PM
Move :
Back :
Select :
Option
Description
Full Screen (Still
image index menu
only)
Displays the highlighted image file full screen. For details,
index menu only)
Slide Show
Protect
Starts the slide show from the highlighted image or movie.
Allows you to protect the JPEG or MPEG1 file from any
changes. Files that are protected are indicated by the
icon.
On
Off
Protects the highlighted file.
Unlock the protect of the
highlighted file.
Rotate
Delete
Allows you to rotate a still image in 90 degree increments
clockwise or counterclockwise. Select (clockwise) or
(counterclockwise).
You cannot rotate a still image that has been protected (or
if the Memory Stick is locked). This option is not available
for a movie file.
Deletes the JPEG or MPEG1 file from the Memory Stick.
You cannot delete a file that has been protected (or if the
Memory Stick is locked).
Selected
Deletes the highlighted file.
After you select the option, the dialog appears. Select
YES.
Close
Displays the Memory Stick Home. Pressing < also
returns to the Memory Stick Home.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Memory Stick Viewer
Viewing Still Images
When you select Full Screen from the Still image index menu and press
, it displays as shown below.
No : 1/1234
Size : 1024x768
File : 100MSDCF/SJP0001.JPG
Date : MAY/31/2003 1:08PM
Prev. :
Next :
Menu :
To Do This …
Do This …
Display the next or previous file Press , to go to the next file, or < to go to the
on the Memory Stick
previous file.
Access additional options
Press
. For details, see “Image Setup Menu
Exit Memory Stick Viewer
Press MEMORY STICK
on the remote
control.
Image Setup Menu
Options
To access the Image setup menu
1 Press M or m to select the menu option.
2 Press
3 Press M or m to select the desired option.
Image setup menu
Return
Information
On
Protect
Rotate
Delete
Close
No : 1/1234
File : 100MSDCF/SJP0001.JPG
Size : 1024x768
Date : MAY/31/2003 1:08PM
Move :
Back :
Select :
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Memory Stick Viewer
Option
Description
Return
Displays the Memory Stick Home.
Information
Allows you to turn on or off the display of file information. Select
On or Off.
Protect
Rotate
Allows you to protect this file from any changes. Selecting Off
unlocks the protect.
Allows you to rotate a still image in 90 degree increments
clockwise or counterclockwise. If the file has been protected (or if
the Memory Stick is locked), it cannot be rotated. Select
(clockwise) or (counterclockwise).
Delete
Deletes the displayed file from the Memory Stick. Select
Selected Items and press
. When the dialog appears,
select YES. If the file has been protected (or if the Memory Stick
is locked), it cannot be deleted.
Playing Movies
When you select Movie Player from the Movie index menu, it displays as
shown below.
Return
Full Screen
Menu
No : 124/1234
Size : 320x240
File : SJP0001.MPG
Date : MAY/31/2003 1:08PM
Prev. :
Next :
Move :
Select :
To Do This …
Play (or pause) the movie. 1 Press M or m to select B/X.
2 Press
Display the previous file on Press < during movie stop mode.
Do This …
.
the Memory Stick
During playback or pause mode the control changes to
m (Rewind).
(Continued)
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Memory Stick Viewer
To Do This …
Do This …
Display the next file on the Press , during movie stop mode.
Memory Stick
Stop playback.
During playback or pause mode the control changes to
M (Fast-forward).
Press M or m to select x and press
.
Display the movie full
screen
Press M or m to select Full Screen and press
To display the Movie Player window, press
.
.
Display the Movie setup
menu to access additional
options
1 Press M or m to select Menu.
2 Press
.
For details, see “Movie Setup Menu Options”.
Displays the Memory Stick 1 Press M or m to select Return.
Home.
2 Press
.
z
When displaying a large file, it will take longer time.
✍ The rewind and fast-forward may not work due to the movie file.
Movie Setup Menu
Options
To access the Movie setup menu
1 Press M or m to select the menu option.
2 Press
3 Press M or m to select the desired option.
Movie Setup Menu
Return
Information
On
Audio Select
L/R
Full Scr
Protect
Menu
Delete
Close
No : 124/1234
Size : 320x240
File : SJP0001.MPG
Date : MAY/31/2003 1:08PM
Move :
Back :
Select :
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Memory Stick Viewer
Option
Description
Information
Allows you to turn on or off the display of file information.
Select On or Off.
Audio Select
Switches the sound to be heard. Select L (left sound), R (right
sound) or L/R (left and right sounds) to hear the respective
sound(s). The setting affects movie files.
Protect
Delete
Allows you to protect the file from any changes. Select On to
protect. Select Off to unlock the protect.
Deletes the displayed file from the Memory Stick. Select
Selected Items and press
. When the dialog appears,
select YES. If the file has been protected (or if the Memory
Stick is locked), it cannot be deleted.
Memory Stick Home Menu Options
The Memory Stick Home lets you select the Slide Show, Options and Select
Folder menus that include additional options for each menu.
To access the Memory Stick Home menu
1 Press M or m to select Slide Show, Options or Select Folder.
2 Press
. The setup menu appears.
3 Press M or m to select the desired option and press
.
Slide Show Menu
Options
The Slide Show menu includes the following menu options.
Option
Description
Starts the slide show. Slide show plays all still and movie files. To
stop the slide show, press
Start
.
Advance
Auto
Advances slides automatically. Slide show
repeats after all files are displayed. Press
to stop the slide show.
Manual
Advances slides manually. Press , or <
on the remote control to go to the next or
previous still or movie image file. Select B/
X to play movie files in the Movie Player
window.
Interval
Close
Allows you to specify a timed slide advance after a selected time
interval. Select from 5 sec, 10 sec, 30 sec, 1 min and 5 min.
Displays the Memory Stick Home.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Memory Stick Viewer
Options Menu
Options
The Options Menu includes the following options.
Option
Description
File
The File option is available when Digi. Cam. Mode is set to Off.
Sort
Allows you to change the order in which the
Memory Stick files are displayed. Select from
Name Order
filename), Name Order
(in alphabetical order by
(in reverse
alphabetical order by filename), Date Order
(in chronological order by recording or
modification date) and Date Order
chronological order by recording or modification
date).
(in reverse
✍ The Sort function works only when fewer
than 2000 files are saved.
Filter
Allows you to selectively display specific file types
within the selected folder.
Select from Show Stills (only still image files),
Show Movies (only movie files), and Off (all
readable files).
Memory Stick Displays the current status of the Memory Stick, including
Memory Stick type, total capacity, used capacity, and free
capacity.
Select Folder Menu
Options
The Select Folder Menu includes the following options.
Option
Description
Digi. Cam. Mode On
Displays only JPEG and MPEG1 files
defined by the DCF rules and JPEG and
MPEG1 files recorded on a Sony digital still
camera or digital video camera.
Off
Displays all folders within the directories.
JPEG and MPEG1 files in those directories
are recognized even if they do not conform to
the DCF file naming rules.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Memory Stick Viewer
Using Select Folder
Menu
Allows you to select different folders to view in the Memory Stick Viewer
when you set Digi. Cam. Mode to Off.
Current folder
Folder list
Memory Stick Home
Slide Show
Options
Digi.Camera Mode
Off
Filter : Still
Select Folder
Close
No
:
File
:
Size :
Date :
Move :
Back :
Select :
To upper stage
First image or movie file in the current
folder
1 Select Off in Digi. Cam. Mode.
2 Press , to select the folder list.
3 Press M or m to select the folder which includes the file you want, and
press
.
z
To select the hidden folders, press , to select the slider and press M
or m.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus
Overview
Opening and choosing a menu
VCR/
DVD
SAT/
CABLE
1 Press MENU to display the menu screen.
POWER
MUTING
MODE
PICTURE WIDE
DISPLAY
2 Press B or b to highlight the desired menu icon and press
to select
it.
3 Use the arrow button to scroll through the features.
4 See the specific menu page for instructions on moving through the
menu.
JUMP
ENT
FAVORITES
MENU
To end a menu session
❑
Press MENU again.
To end one menu session and move to another
❑
Press V to return to the menu icons.
SAT/
CABLE
Press B or b to choose the next menu icon and press
to select it.
VCR/DVD
TV
FUNCTION
The menu gives you access to the following features:
Menu Icon Description
Page
It also allows you to customize the Picture Mode based on
the type of program you are viewing.
audio programming (SAP), or customizing the Effect of
the sound on your LCD projection TV.
center in wide mode, and set the 4:3 Default mode.
Program function, and more.
Lets you control the viewing of programs based on their
ratings.
Provides several options for setting up your channels,
labeling your Video inputs, and selecting the language of
the on-screen menus.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus
Using the Video Menu
To select the Video Menu
1 Press MENU.
2 Press B or b to highlight the
Video icon
.
and press
3 Use the arrow button to scroll
through the features.
4 Press
to select a feature.
That feature’s adjustment appears.
5 Use the arrow button to make the desired adjustments.
6 Press
to select/set.
7 Press MENU to exit the menu screen.
To restore the factory default settings for Picture, Brightness, Color,
Hue, Sharpness and Color Temp
❑
Press RESET on the remote control when in the Video menu.
Selecting Video
Options
The Video menu includes the following options.
Option
Description
Vivid
Mode
Select for enhanced picture contrast and sharpness.
Recommended for Normal viewing conditions.
Standard
Pro
Customized
picture
viewing
Select to display a picture with minimum
enhancements.
✍ You can alter the Video menu settings (Picture,
Brightness, Color, etc.) for each Mode.
✍ You may set up a Picture Mode (Vivid, Standard, Pro)
independently for each Video input (Video 1 - Video 7,
including the Antenna input). Your Picture Mode
settings will automatically be saved after each selection.
This will enable you to customize the Picture Mode
setting for each type of signal source. Typically, Vivid
should be used for higher quality input signal sources,
and Pro for lower quality signals.
✍ We recommend selecting Standard for normal home
use.
To quickly and easily change from one Video Mode to
another, use PICTURE MODE on the remote control.
z
(Continued)
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus
Option
Description
Picture
Adjust to increase picture contrast and deepen the color or
decrease picture contrast and soften the color.
Brightness
Color
Adjust to brighten or darken the picture.
Adjust to increase or decrease color intensity.
Adjust to increase or decrease the green tones.
Adjust to sharpen or soften the picture.
Choose from three color temperatures:
Hue
Sharpness
Color Temp
Whiteintensity
adjustment
Cool
Select to give the white colors a blue tint.
Select to give the white colors a neutral tint.
Select to give the white colors a red tint.
Neutral
Warm
NR
Select to reduce the noise level of connected equipment. It is also
effective on the signal from the VHF/UHF jack. Select from High,
Medium, Low and Off.
Noise
Reduction
Mild Mode
On Select for a natural, soft picture.
Off Select to turn off the Mild Mode.
✍ Mild Mode is unavailable when the Mode is set to vivid.
Advanced
Video
Program
DRC Mode
Creates a high-resolution picture with 4x density,
for high quality sources (i.e., DVD player, satellite
receiver).
High Density Recommended for moving
pictures.
Progressive
CineMotion
Recommended for still
images and text.
Provides an optimized
display by automatically
detecting film content and
applying a reverse 3/2
pulldown process. Moving
pictures will appear clearer
and more natural-looking.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus
Option
Description
Advanced
Video
Palette
Allows you to customize the level of detail
(Reality) and smoothness (Clarity) for up to three
input sources. For example, you can create one
Custom setting to optimize your cable input's
picture, and create another to optimize your DVD
player's picture. You can switch among the three
Custom settings.
(Continued)
1 Press the arrow button to highlight Custom
1, Custom 2, or Custom 3 and then press
.
The DRC palette appears.
Custom 1
[25]
Clarity [ 1]
2 Press the arrow button to adjust the position
of the marker (z). As you move the z higher
along the Reality axis, the picture becomes
more detailed. As you move the z to the right
along the Clarity axis, the picture becomes
smoother.
3 To save the setting, press
.
To return the Custom options to the default
factorysettings, press the RESET button.
✍ Advanced Video is unavailable when you have selected
Mild picture mode, or you are watching 1080i, 720p and
480p sources with Video 5 to 7 inputs.
BN
Smoother
Select to reduce noise caused by video encoding
and decoding process. It is especially effective for
watching a DVD or HDTV picture. Select from
High, Medium, Low and Off.
Block Noise
Smoother
✍ An image may not be corrected due to the connected
equipment.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus
Using the Audio Menu
To select the Audio Menu
1 Press MENU.
2 Press B or b to highlight the
Audio icon
.
and press
3 Use the arrow button to scroll
through the options.
4 Press
to select an option.
That option’s settings appear.
5 Use the arrow button to scroll through the settings.
6 Press
to select the desired setting.
7 Press MENU to exit the menu screen.
To restore the factory default settings for Treble, Bass and Balance
❑
Press RESET on the remote control when in the Audio menu.
Selecting Audio
Options
The Audio menu includes the following options:
Option
Treble
Bass
Description
Adjust to increase or decrease higher-pitched sounds.
Adjust to increase or decrease lower-pitched sounds.
Adjust to emphasize left or right speaker balance.
Balance
Steady
Sound
Auto
Select to stabilize the volume.
Off
Select to turn off Steady Sound.
Effect
TruSurround Select for surround sound (for stereo programs
only).
Simulated
Off
Adds a surround-like effect to mono programs.
Normal stereo or mono reception.
MTS
Stereo
Select for stereo reception when viewing a program
broadcast in stereo.
Enjoy stereo,
bilingual and
mono
Auto SAP
Mono
Select to automatically switch the LCD projection
TV to second audio programs when a signal is
received. (If no SAP signal is present, the LCD
projection TV remains in Stereo mode.)
programs
Select for mono reception. (Use to reduce noise
during weak stereo broadcasts.)
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus
Option
Description
Speaker
On
Off
Select to turn on the LCD projection TV speakers.
Select to turn off the LCD projection TV speakers
and listen to the LCD projection TV's sound only
through your external audio system speakers.
Audio Out
Easy control
of volume
Variable
Fixed
The LCD projection TV’s speakers are turned off,
but the volume output from your audio system can
still be controlled by the LCD projection TV’s
remote control.
adjustments
The LCD projection TV’s speakers are turned off
and the volume, bass and treble output of the LCD
projection TV is fixed. Use your audio receiver’s
volume control to adjust the volume through your
audio system.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus
Using the Screen Menu
To select the Screen menu
1 Press MENU.
2 Press B or b to highlight the
Screen icon
.
and press
3 Use the arrow button to scroll
through the features.
4 Press
to select a feature.
That feature’s options appear.
5 Use the arrow button to scroll through the options.
6 Press
to select the desired option.
7 Press MENU to exit the menu screen.
Selecting Screen
Options
The Screen menu includes the following options:
To change from one Wide Mode to another, use WIDE MODE on the
remote control.
z
Option
Description
Wide Mode
Wide Zoom
Select to enlarge the 4:3 picture, to fill the 16:9
screen, keeping the original image as much as
possible.
Select a Screen
Mode to use for
4:3 sources.
Normal
Full
Select to return the 4:3 picture to normal
mode.
Select to enlarge the 4:3 picture horizontally
only, to fill the wide screen.
Zoom
Select to enlarge the 4:3 picture horizontally
and vertically to an equal aspect ratio that fills
the wide screen.
Wide mode is unavailable when you are watching
720p and 1080i sources, and when viewing photos
from your Memory Stick media.
z
z
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus
Option
Description
4:3 Default
Wide Zoom
Select to enlarge the 4:3 picture, to fill the 16:9
screen, keeping the original image as much as
possible.
Select the default
Screen Mode to
use for 4:3
Normal
Full
Select to return the 4:3 picture to normal
mode.
sources.
Select to enlarge the 4:3 picture horizontally
only, to fill the wide screen.
Zoom
Select to enlarge the 4:3 picture horizontally
and vertically to an equal aspect ratio that fills
the wide screen.
Off
Select to continue using the current Screen
Mode setting when the channel or input is
changed.
The 4:3 Default functions only when the LCD
projection TV receives 480i and 480p signals.
z
z
If 4:3 Default is set to anything but Off, the Wide Mode
setting changes only for the current channel. When
you change channels (or inputs), Wide Mode is
automatically replaced with the 4:3 Default setting. To
retain the current Wide Mode setting as channels and
inputs are changed, set 4:3 Default to Off.
Vertical Center Adjust
Allows you to move the position of the picture
up and down in the window. (Available only in
Wide Zoom and Zoom modes.)
Press V or v and press
to choose a
position between +25 and -25 (Zoom mode),
and +10 and –10 (Wide Zoom mode).
Vertical Size
Adjust
Allows you to adjust the vertical size of the
picture. (Available only in Wide Zoom and
Zoom modes.)
Press V or v and press
correction between +7 and -7.
to choose a
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus
Using the Channel Menu
To select the Channel Menu
1 Press MENU.
2 Press B or b to highlight the
Channel icon
.
and press
3 Use the arrow button to scroll
through the features.
4 Press
to select a feature.
That feature’s options appear.
5 Use the arrow button to scroll through the options.
6 Press
to select the desired option.
7 Press MENU to exit the menu screen.
Selecting Channel
Options
The Channel menu includes the following options:
Option
Description
Favorite
Channels
Let you set up a list of your favorite channels. For details, see
Cable
On
Select if you are receiving cable channels with a
CATV cable.
Off
Select if you are using an antenna.
✍ You should run Auto Program after changing the
Cable setting.
Channel Fix
2-6
“Fix” your TV's channel setting to 2-6 and use
the cable box or satellite receiver to change
channels. Select one of these settings if you
connected the equipment to the VHF/UHF jack.
Useful when you
have a cable box
or satellite
receiver connected
AUX 2-6
Video 1
Same as 2-6, except you select one of these
settings if you have connected the device to the
Use when connecting a cable box. TV output
should be connected through the cable box.
Auto Program
Automatically programs the LCD projection TV for all
receivable channels.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus
Option
Description
Channel
Skip/Add
Removes and adds viewable channels.
1 Use the arrow button to scroll through the channels until
you find the channel you want to skip/add.
2 Press
to select it.
3 Press V or v to toggle between “Add” and “Skip.”
4 Press
to select.
Channels that you set to be skipped can be accessed
only with the 0-9 buttons.
z
Channel Label
Allows you to assign labels (such as station call letters) to
channel numbers. You can label up to 40 channels.
1 Press the arrow button to highlight Channel and press
.
2 Press V or v to scroll through the channel numbers (1-125).
Then press
to select the channel number that you
want to assign a label.
3 Press the arrow button to highlight Label and press
.
4 Press V or v to scroll through the label characters (A-Z, 0-
9, etc.). Then press
character.
to select the highlighted
5 Repeat to add up to 5 characters to the label.
6 To assign labels to more channels, repeat steps 1-4.
7 Press B to return to the Channel Menu, or press MENU to
exit the Menus.
Channel Label is not available (grayed out) when
watching the AUX and VIDEO inputs.
z
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus
Using the Parent Menu
The Parent Menu allows you to set up the TV to block programs according
to their content and rating levels.
To select the Parent Menu
1 Press MENU.
2 Press B or b to highlight the
Parent icon
.
and press
3 Use the 0-9 buttons on the
remote control to enter a four-
digit password.
4 If this is the first time you are creating this password, confirm the
password by entering it again. (The Parent Menu options appear.)
5 Press V v B b to change settings. Press
to select the changed
setting.
6 Press MENU to exit the Menu.
✍ You need your password for any future access into the Parent Menu. If
Selecting Parent
Options
The Parent Menu includes the following options:
Option
Description
Parental Lock
Off
Parental lock is off. No programs are blocked
from viewing.
Turn ratings on/off and
select a rating system
Child
Maximum ratings permitted are:
US: TV-Y, TV-G, G
Canada: C, G, TV-Y
Youth
Maximum ratings permitted are:
US: TV-PG, PG
Canada: C8+, PG, 8 ans+, TV-PG
Y. Adult Maximum ratings permitted are:
US: TV-14, PG-13
Canada: 14+, 13 ans+, TV-14
Custom Select to set ratings manually.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus
Option
Description
If you are not familiar with the Parental Guideline
rating system, you should select Child, Youth, or
Young Adult to help simplify the rating selection.
To set more restrictive ratings, select Custom.
z
For descriptions of Child, Youth, and Young
Adult ratings, see page 80.
z
Change Password
Select Country
For changing your password.
U.S.A.
To deactivate the Parental Control feature
Set Parental Lock to OFF when in the Parent menu.
❑
To change the password
1 Select Change Password option when in the Parent menu using the
arrow button, and press
.
2 Enter a new four-digit password using the 0-9 buttons.
3 Confirm the new password by entering it again.
4 Press MENU to exit the menu screen.
Viewing Blocked
Programs
You can view a blocked program by entering the password.
1 Press ENTER when tuned to a blocked program.
2 Enter your password using the 0-9 buttons.
Parental Control will be canceled temporarily until you turn your LCD
projection TV off.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus
Selecting Custom
Rating Options
US custom rating options
Rating Menu includes the following options. (If you selected Canada, see
page 81.)
z
To ensure maximum blocking capability, the age-based ratings should be
blocked.
Option
Description
Movie Rating
G
All children and General Audience.
Parental Guidance suggested.
PG
PG-13 Parental Guidance for children under 13.
R
Restricted viewing, parental guidance is suggested
for children under 17.
NC-17 No one 17 and under allowed.
and X
TV Rating
Age-Based Options
Block programs
by their rating,
content or both
TV-Y
All children.
TV-Y7
TV-G
Directed to older children.
General Audience.
TV-PG Parental Guidance suggested.
TV-14 Parents Strongly cautioned.
TV-MA Mature Audience only.
Content-Based Options
FV
D
Fantasy Violence.
Suggestive Dialogue.
Strong Language.
Sexual situations.
Violence.
L
S
V
Unrated
Block
Blocks all programs and movies that are broadcast
without a rating.
Block programs
or movies that are
broadcastwithout
a rating
Allow
Allows programs and movies that are broadcast
without a rating.
If you select “Block,” please be aware that the following
programs may be blocked: emergency broadcasts,
political programs, sports, news, public service
announcements, religious programs and weather.
z
✍ The content ratings will increase depending on the level of the age-based rating.
For example, a program with a TV-PG V (Violence) rating may contain moderate
violence, while a TV-14 V (Violence) rating may contain more intense violence.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus
Canadian custom rating options
Rating Menu includes the following options. (If you selected U.S.A., see
page 80.)
Option
Description
C
English Rating
All children.
C8+
Children 8 years and older.
General programming.
G
PG
Parental Guidance.
14+
Viewers 14 and older.
18+
Adult programming.
French Rating
USA Rating
G
General programming.
8 ans+
13 ans+
16 ans+
18 ans+
Not recommended for young children.
Not recommended for ages under 13.
Not recommended for ages under 16.
Programming restricted to adults.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus
Using the Setup Menu
To select the Setup Menu
1 Press MENU.
2 Press B or b to highlight the
Setup icon
.
and press
3 Use the arrow button to scroll
through the features.
4 Press
to select a feature.
That feature’s options appear.
5 Use the arrow button to scroll through the options.
6 Press
to select the desired option.
7 Press MENU to exit the menu screen.
Selecting
The Setup menu includes the following options:
Setup Options
Option
Description
Caption Vision
Allows you to select from three closed caption modes (for
programs that are broadcast with closed captioning).
Off
Turns off Caption Vision.
CC1, CC2,
CC3, CC4
Displays a printed version of the
dialog or sound effects of a program.
(Should be set to CC1 for most
programs.)
Text1, Text2,
Text3, Text4
Displays network/station information
presented using either half or the
whole screen (if available). For closed
captioning, set to CC1.
Info
Displays the program name and the
time remaining in the program (if the
broadcaster offers this service).
Displays when the channel is changed
or the DISPLAY button is pressed.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus
Option
Description
Video Label
Allows you to label the audio/video components you connected
to the LCD projection TV so you can identify them when using
TV/VIDEO. When in the Setup menu’s Video Label feature,
press V or v to highlight an input to label, then press
to
select it. Use the arrow button to scroll through the labels. Press
to select the component you connected to each of the
input jacks on the back of your LCD projection TV. Select
“Skip” if you do not have a component connected to a particular
set of input jacks.
Video 1/2/3/4
VHS, DVD, Receiver, Satellite, Cable
Box, 8mm, DTV, Game, LD, Web,
Beta, Skip
Video 5/6/7
DVD, Satellite, Cable Box, DTV, HD,
Game, Skip
If you select “Skip,” your LCD projection TV skips this
connection when you press TV/VIDEO.
✍ When you select “Receiver” on Video Label, your LCD
projection TV’s input is fixed (for Video 1 only).
Game Picture
Adjust
Allows you to move the position of the picture left and right in
the window. (Available for the picture of connected equipment.)
Select while watching the picture to be adjusted. The TV stores
the position in memory for each input.
Language
Select to display all on-screen menus in your language of
choice: English, Español, Français.
(Continued)
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus
Option
Description
Clock/Timers
Lets you set the clock on your TV and allows you to program
your TV for scheduled viewing using the Timers.
Sleep
Allows you to select the time in
minutes (15, 30, 45, 60, or 90) that
you want the TV to remain on before
shutting off automatically.
Timer 1
Timer 2
You can use the Timers to program the
TV to turn on and off and tune to a
specific channel at two scheduled
viewing times.
Timer 1 and Timer 2 are not available to be set until you set the
Current Time.
1 Press V or v to highlight Timer 1 or Timer 2. To set the
timer, press b.
2 Press V or v to highlight one of the following options, then
press
.
Program
Select to set the Timer by day, time,
duration, and channel.
Off
Select to turn off the Timer. (Your
previous settings are saved.)
3 If you selected Program in step 2, press V and v to set the
day(s), hour, minute, duration, and channel number. Press
or press b to confirm each setting and move to the
next setting.
Press B to go back to the previous setting.
4 Press MENU to exit the Menu. An LED on the front panel
will light, indicating the timer has been set.
✍ To go directly to programming Timer 1 or 2, press
instead of pressing b.
Current Time
1 Press
to select Current Time.
2 Press V and v to set the current time (day, hour, and
minute). Press
(or press b) to comfirm each setting
and move to the next setting. Press B to go back the
previous setting.
3 Press MENU to exit the Menu.
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menus
Option
Description
Image Shift
Corrects the Image on your LCD projection TV.
Before adjusting
After adjusting
Auto: (Factory setting) Automatically corrects double images.
Level 1-4 (manual): Select the value with which double images
are improved.
High Altitude
On
Off
Set to use the unit at an altitude of
1,500 m (4921 ft.) or higher.
Set to use the unit at normal altitudes.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Programming the Remote Control
The remote control is preset to operate Sony brand video equipment.
Function
Equipment
Programmable Code
Number
VCR/DVD
Sony VCR
301
801
SAT/CABLE
Sony DSS tuner
If you have video equipment that you want to control with the LCD
projection TV's remote control, use the following procedures to program the
remote control.
✍ The equipment must have infrared (IR) remote capability in order to be
used with the remote control.
VCR/
DVD
SAT/
CABLE
POWER
DISPLAY
MUTING
MODE
PICTURE WIDE
code number for the manufacturer’s code for your component. If more than
one code number is listed, start with the number listed first. Use the code
number to complete the following procedure.
1 Press CODE SET.
JUMP
ENT
2 Press the desired FUNCTION button.
3 Input the three-digit manufacture's code number.
4 Press ENT.
FAVORITES
MENU
✍ When no code number is input for 30 seconds or invalid or incorrect
numbers are input, the remote control is reset to the normal TV
remote control mode.
SAT/
CABLE
VCR/DVD
TV
FUNCTION
TV/VIDEO
Tips
FREEZE /TV/SAT ANT
GUIDE
❑
❑
❑
If more than one code number is listed, try entering them one by one
until you come to the correct code for your component.
VOL
CH
If you enter a new code number, the code number you previously
entered at that setting is erased.
CODE SET RESET SLEEP MTS/SAP
In some rare cases, you may not be able to operate your component with
the Sony remote control. In this case, use the component’s own remote
control unit.
TV
RM-Y913
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Manufacturer’s Codes
DVD Players
Manufacturer Code
Manufacturer Code
NEC
314, 336, 337
VCRs
Sony
751
753
752
755
754
Olympic
Optimus
Panasonic
309, 308
327
Manufacturer Code
Panasonic
Pioneer
RCA
Sony
301
327
308, 309, 306,
307
Admiral
(M. Ward)
Pentax
Philco
Philips
Pioneer
Quasar
305, 304
Toshiba
Aiwa
338, 344
308, 309
Audio Dynamic 314, 337
Cable Boxes
308, 309, 310
308
Broksonic
Canon
319, 317
309, 308
332
Manufacturer Code
Hamlin/Regal
223, 224, 225,
308, 309, 306
Citizen
226
RCA/PROSCAN 304, 305, 308,
309, 311, 312,
Craig
302, 332
315
Jerrold/G. I.
201, 202, 203,
204, 205, 206,
207, 208, 218,
222
Criterion
Curtis Mathes
Daewoo
DBX
313, 310, 329
304, 338, 309
341, 312, 309
314, 336, 337
304
Realistic
309, 330, 328,
335, 324, 338
Oak
227, 228, 229
219, 220, 221
214, 215
Sansui
Samsung
Sanyo
Scott
314
Panasonic
Pioneer
Dimensia
Emerson
322, 313, 321
330, 335
319, 320, 316,
317, 318, 341
Scientific Atlanta 209, 210, 211
312, 313, 321,
335, 323, 324,
325, 326
Sony
230
Fisher
Funai
330, 335
338
Tocom
Zenith
216, 217
212, 213
Sharp
327, 328
315
General Electric 329, 304, 309
Shintom
Go Video
Goldstar
Hitachi
322, 339, 340
332
Satellite Receivers
Signature 2000 338, 327
(M. Ward)
Manufacturer Code
306, 304, 305,
338
SV2000
Sylvania
338
Sony
801
308, 309, 338,
310
General Electric 802
Instant Replay
JC Penney
309, 308
Hitachi
805
309, 305, 304,
330, 314, 336,
337
Symphonic
Tashiro
Tatung
338
Hughes
Panasonic
804
332
803
JVC
314, 336, 337,
345, 346, 347
314, 336, 337
RCA/
802, 808
Teac
314, 336, 338,
337
PROSCAN
Kenwood
LXI (Sears)
314, 336, 332,
337
Toshiba
806, 807
Technics
Toshiba
Wards
309, 308
312, 311
332, 305, 330,
335, 338
327, 328, 335,
331, 332
Magnavox
Marantz
Marta
308, 309, 310
314, 336, 337
332
Yamaha
Zenith
314, 330, 336,
337
Memorex
Minolta
309, 335
331
305, 304
Mitsubishi/MGA 323, 324, 325,
326
Multitech
325, 338, 321
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Operating Other Components with Your LCD Projection TV
Remote Control
Operating a VCR
Press FUNCTION VCR/DVD.
To Do This ...
Turn on/off
Change channels
Record
Press
SAT/CABLE (POWER)
CH +/–
N and z simultaneously
Play
N
Stop
x
Fast forward
Rewind the tape
Pause
M
m
X (press again to resume normal playback)
Search the picture
M or m during playback
forward or backward
(release to resume normal playback)
Operating a DVD
Player
Press FUNCTION VCR/DVD.
To Do This ...
Turn on/off
Play
Press
SAT/CABLE (POWER)
N
Stop
x
Pause
X (press again to resume normal playback)
Step through different tracks of M to step forward or m to step backward
an audio disc
Step through different chapters CH+ to step forward or CH– to step backward
of a video disc
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Operating a Cable
Box
Press FUNCTION SAT/CABLE.
To Do This ...
Press
Turn on/off
SAT/CABLE (POWER)
SAT/CABLE (FUNCTION)
0-9 buttons, ENTER
CH +/–
Select Cable Box
Select a channel
Change channels
Back to previous channel
JUMP
Operating a Satellite
Receiver
Press FUNCTION SAT/CABLE.
To Do This ...
Press
Turn on/off
SAT/CABLE (POWER)
SAT/CABLE (FUNCTION)
0-9 buttons, ENTER
CH +/–
Select Satellite Receiver
Select a channel
Change channels
Back to previous channel
Display channel number
Display DBS menu
Select item
JUMP
DISPLAY
MENU
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Notes on Using Memory Stick, Memory Stick PRO Media
Memory Stick,
Memory Stick PRO
Precautions
When using Memory Stick, Memory Stick PRO media, follow these
precautions:
❑
To avoid permanent damage to still image data, do not turn off the TV or
remove Memory Stick media from the insertion slot while data is being
read (as indicated by the Memory Stick indicator light being on).
❑
Avoid touching the terminal of Memory Stick media or bringing it into
contact with a metal object.
❑
❑
❑
❑
Do not drop, bend, or submit Memory Stick media to external shock.
Do not disassemble or modify Memory Stick media.
Avoid getting liquid on Memory Stick media.
Apply labels only within the designated label area.
Label Area
❑
To avoid permanent damage to still image data, do not use or store
Memory Stick media in a location subject to:
❑
❑
❑
❑
❑
❑
❑
❑
High temperature (such as near a heater or inside a hot car)
High humidity
Direct sunlight
Corrosive substances
Magnetic fields
Excessive dust
Static electricity or electric noise
Electric surges
❑
Store and carry Memory Stick media in its original case to ensure
protection of stored data.
❑
❑
Save a backup of stored data.
Memory Stick PRO of maximum 1GB-memory can be used for this
unit.
90
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Notes on Using Memory Stick Duo
Memory Stick Duo is a new, compact version of the standard-sized Memory
Stick recording medium. You can use a Memory Stick Duo on your LCD
projection TV by inserting a Memory Stick Duo into an adapter before
inserting it into the TV.
❑
Be sure to attach a Memory Stick Duo to the adapter with the correct
orientation.
❑
Be sure to insert the Memory Stick Duo adapter into the Memory Stick
slot with the correct orientation. Otherwise, the LCD projection TV may
be damaged.
❑
Do not insert the Memory Stick Duo adapter without the Memory Stick
Duo attached. Doing so may result in malfunction of the LCD
projection TV.
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Contacting Sony
If, after reading these operating instructions, you have additional
questions related to the use of your Sony television, please call our
Customer Information Services Center at 1-800-222-SONY (7669) (US
residents only) or (416) 499-SONY (7669) (Canadian residents only).
Troubleshooting
Twin View
Problem
Possible Remedies
I cannot get Twin View to work ❏ If you are using a cable box to unscramble all channels (as shown on page 28),
you cannot use the Twin View feature. This is because the cable box can
unscramble only one channel at a time.
❏
You can use Twin View to view a signal from a different source that is connected
to the TV’s A/V jacks (such as a VCR or DVD player) in the second window by
pressing TV/VIDEO while in Twin View.
❏
Sources connected to the AUX, HD/DVD IN 5 and 6, DVI-HDTV IN 7 inputs
display in the left Twin View window, but not the right.
There is no Twin View window, ❏ Be sure the Twin View window is set to a video input or channel that has a signal
or it is just static
airing.
❏
❏
❏
You might be tuned to a video input with nothing connected to it. Try cycling
through the video inputs by pressing TV/VIDEO.
Twin View cannot display
anything but TV channels
Try cycling through the video inputs by pressing TV/VIDEO. Check that the
Twin View displays the same
program in both windows
Both Twin View windows might be set to the same channel. Try changing
channels in either window.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Remote Control
Problem
Possible Remedies
Remote control does not
operate
❏
❏
❏
The batteries could be weak. Replace the batteries.
Check the orientation of the batteries.
Press FUNCTION (VCR/DVD, SAT/CABLE or TV) to select the equipment that
you want to operate.
❏
❏
Make sure this unit’s power cord is connected securely to the wall outlet.
Locate the unit at least 3-4 feet away from fluorescent lights.
Cannot change channels with
the remote control
❏
❏
If you are using the TV to change channels, first press FUNCTION TV button.
If you are using another device to change channels, be sure you have not
inadvertently switched your TV from the channel 3 or 4 setting. Use the Channel
If you are using another device to change channels, be sure to press FUNCTION
(VCR/DVD, SAT/CABLE or TV) for that device.
❏
Remote control does not
operate non-Sony video
equipment
❏
❏
❏
If you replaced the batteries to the remote recently, the code numbers for the video
equipment may need to be reset.
There may be more than one code for the equipment that you are attempting to
operate.
There is a possibility that some non-Sony equipment cannot be operated by your
Sony TV remote.You may need to use the equipment’s original remote control.
Memory Stick
Problem
Possible Remedies
Image does not display
❏
❏
Memory Stick functions are not available while using Twin View, Freeze or
Favorite Channel functions.
❏
❏
❏
Make sure that the photo or movie files are contained in the Memory Stick.
Set Digi. Cam. Mode to Off and select the folder when the photo or movie image
is processed by the computer.
"No Memory Stick" is
displayed
❏
❏
"Memory Stick error" is
displayed
The Memory Stick is not correct. Remove the Memory Stick and insert it again
❏
❏
❏
The Memory Stick may be broken. Insert another Memory Stick.
"File error" is displayed
A name of the selected file is not correct.
"Format error" is displayed
The Memory Stick is not formatted correctly. Format correctly with other
equipment such as a digital camera or insert another Memory Stick formatted
correctly.
"Cannot play" is displayed
❏
❏
Make sure that the photo or movie files to be played back are contained in the
Memory Stick.
Set Digi. Cam. Mode to Off and select the folder.
(Continued)
93
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Problem
Possible Remedies
❏ A Memory Stick not available for use with this LCD projection TV is inserted.
"Memory Stick type error" is
displayed
"No files that can be displayed" ❏ The photo or movie image to be played back is not contained when the Digi.
is displayed Cam. Mode is set to On.
"No files in this folder that can ❏ The photo or movie image is not contained in the selected folder when the Digi.
be displayed" is displayed
Cam. Mode is set to Off.
"Memory Stick Locked" is
displayed
❏
❏
❏
The Memory Stick is locked. Unlock the Memory Stick.
"No movie file" is displayed
Show Movies is selected from Filter of the Option menu. However there is no
movie file in the folder.
"No still file" is displayed
Show Stills is selected from Filter of the Option menu. However there is no still
file in the folder.
Cannot use Memory Stick Duo ❏ Check that the Memory Stick Duo and adaptor are inserted correctly.
Blank square appears instead of ❏ This indicates that the image does not support a thumbnail view. Selecting
a thumbnail image
the icon, however, displays the full-size image on the screen. It could also
indicate that both the thumbnail and full-size images are corrupted or not
supported.
Cannot rotate image, no
thumbnail appears
❏
❏
Be sure the LOCK switch on the Memory Stick is set to off.
If a blank square appears instead of the thumbnail image, this indicates
that the image does not support a thumbnail view and cannot be rotated.
Cannot hear audio while using
Memory Stick
❏
❏
There is no audio available while using Memory Stick.
Image file name does not
appear; instead, dashes (---)
appear
Dashes appear instead of the file name if the image was recorded using
equipment that is not DCF-compliant. Dashes also appear if a DCF-
compliant file was renamed.
Video
Problem
Possible Remedies
No picture (screen not lit), no
sound
❏
If your LCD projection TV does not turn on, and a red light keeps flashing, your
LCD projection TV may need service. Call your local Sony Service Center.
Make sure the power cord is plugged in.
Press POWER/STANDBY on the front of the LCD projection TV.
Check to see if the TV/VIDEO setting is correct: when watching TV, set to TV,
and when watching connected equipment, set to VIDEO 1, 2, 3, 4, 5, 6 or 7.
The Parental Control feature is activated (See “Using the Parent Menu” on
page 78.).
❏
❏
❏
❏
❏
If your LCD projection TV’s power is on, and LAMP (red) indication is
flashing, the lamp for the light source burns out. Replace it with new Sony
❏
Try another channel; it could be station trouble.
94
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Problem
Possible Remedies
Dark, poor or no picture
(screen lit), good sound
❏
❏
❏
Check the antenna/cable connections.
It is strongly recommended to connect the antenna using a 75-ohm coaxial cable
to get optimum picture quality. A 300-ohm twin lead cable can be easily affected
by radio noise and the like, resulting in signal deterioration. If you use a 300-ohm
twin lead cable, keep it away as far as possible from the LCD projection TV.
Do not use an indoor antenna because it is especially susceptible to radio noise
No color
❏
Only snow and noise appear on ❏ Check the antenna/cable connections.
the screen
❏
❏
❏
Make sure the channel is broadcasting programs.
Dotted lines or stripes
Double images
❏
❏
Adjust the antenna.
Move the LCD projection TV away from noise sources such as cars, neon signs,
or hair-dryers.
❏
❏
Use a highly directional outdoor antenna or a cable (when the problem is caused
by reflections from nearby mountains or tall buildings).
Set the Image Shift to an appropriate value. The default setting is Auto. If doubled
“Black box” on screen
❏
option to Off. If you were trying to select closed captioning, select CC1 instead of
Text 1-4.
Black bands appear at the top
and bottom of the screen
❏
Some wide-screen programs are filmed in aspect ratios that are greater than 16:9
(this is especially common with theatrical releases). Your LCD projection TV will
show these programs with black bands at the top and bottom of the screen. For
more details, check the documentation that came with your DVD (or contact your
program provider).
Certain programs on DVD or
other digital sources display a
loss of detail, especially during
fast-motion or dark scenes
❏
❏
The compression used by certain digital broadcasts and DVDs may cause your
TV’s screen to display less detail than usual, or cause artifacts (small blocks or
dots, pixelations) to appear on your screen. This is due to your TV’s large screen
and ability to show very fine detail, and is normal for certain digitally recorded
the picture while viewing these sources.
Some video sources do not
appear when you press TV/
VIDEO
83).
(Continued)
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Audio
Problem
Possible Remedies
Good picture, no sound
❏
❏
Audio noise
❏
Communication problems may occur if the infrared communication equipment
(e.g., infrared cordless headphones) is used near the TV. Please use headphones
other than infrared cordless headphones. Also, if you use the infrared
communication equipment other than infrared cordless headphones, move the
infrared transceiver away from the TV until the noise is eliminated, or move the
transmitter and receiver of the infrared communication equipment closer together.
Cannot gain enough volume
when using a cable box
❏
❏
Increase the volume of the cable box using the cable box’s remote control. Then
press FUNCTION TV button and adjust the TV’s volume.
Sound seems weak or
insufficient
The TV’s audio might be set to Auto SAP or Mono, when it might be better set to
already set to Stereo, switch to Mono (which may reduce background noise
during weak stereo broadcasts).
Cannot raise the volume on
external speakers
❏
❏
If the Speaker option is set to Off and the Audio Out option is set to Fixed (in
order to output the sound to your audio system) use your audio receiver to adjust
option to Variable.
Channels
Problem
Possible Remedies
(UHF) when using an antenna
TV is fixed to one channel
❏
Use Auto Program in the Channel Menu to add receivable channels that are not
❏
Use Auto Program in the Channel Menu to add receivable channels that are not
❏
❏
Cannot receive any channels
when using cable TV
Use Auto Program in the Channel Menu to add receivable channels that are not
❏
❏
Check your cable settings.
Cannot receive or select
channels
❏
Use Auto Program in the Channel Menu to add receivable TV channels that are
Cannot receive digital channels ❏ Check the connections between the DTV receiver and the LCD projection
(when a DTV receiver is
connected)
❏
Check your local listings to find out if you can receive digital broadcasts in
your area.
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
General
Problem
Possible Remedies
How to restore Video settings
to factory settings
❏
How to restore Audio settings
to factory settings
❏
video equipment connected to
the TV
Cannot operate Menu
❏
❏
If a menu option appears in gray, this indicates that the menu option is not
available.
Lost password
The master password clears your previous password; it cannot be used to
temporarily unblock channels.
LED on the display unit is lit
❏
❏
The POWER/STANDBY LED lights up when the TV is turned on. If the LED
blinks continuously, this may indicate the TV needs a service.
The TIMER LED indicates that the timer is set. When the timer is set, this LED
will remain lit even when the LCD porjection TV is turned off.
LCD projection TV is fixed to
one channel
❏
❏
Use Auto Program in the Channel menu to add receivable channels that
97
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Flashing Indicators on the Front of the Monitor
KF-50WE610/
60WE610
KF-42WE610
POWER/STANDBY
TIMER
POWER/STANDBY
TIMER
LAMP
LAMP
The POWER/STANDBY (red) and/or LAMP (red) indicators indicate the
conditions of the LCD projection TV and warnings by lighting or flashing,
as follows.
The POWER/STANDBY indicator flashes.
❑
The lamp for the light source is ready to turn on.
The POWER/STANDBY indicator flashes three times.
❑
The lamp cover is not attached securely. When you correct, the
POWER/STANDBY indicator goes out and the LCD projection TV
The LAMP indicator flashes.
❑
The lamp for the light source burns out.
If the LCD projection TV is not recovered after correcting the problems,
contact with qualified Sony personnel.
98
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Specifications
Projection System
LCD Panel
Projection Lens
Antenna
3 LCD Panels, 1 lens projection system
0.87 inch TFT LCD panel Approx. 3.28 million dots (1,092,168 pixels)
High Performance, large diameter hybrid lens F2.4
75 ohm external terminal for VHF/UHF
UHP lamp, 100W
Lamp
XL-2100U
Television System
Screen Size (measured diagonally)
Channel Coverage
VHF
NTSC, American TV Standard
KF-42WE610: 42 inches, KF-50WE610: 50 inches, KF-60WE610: 60 inches
2-13
UHF
14-69
CATV
1-125
Power Requirements
Number of Inputs/Outputs
DVI-HDTV
120V, 60 Hz
1 terminal, 3.3 V T.M.D.S., 50 ohms
The DVI-HDTV input terminal is compliant with the EIA-861 standard and is
not intended for use with personal computers.
Video (IN)
S Video (IN)
4
4
1 Vp-p, 75 ohms unbalanced, sync negative
Y: 1 Vp-p, 75 ohms unbalanced, sync
negative
C: 0.286 Vp-p (Burst signal), 75 ohms
500 mVrms (100% modulation)
Audio (IN)
6
1
Impedance: 47 kiloohms
500 mVrms at the maximum volume setting
(Variable)
AUDIO (VAR/FIX)
500 mVrms (Fixed)
Impedance (output): 2 kiloohms
minijacks
Y: 1.0 Vp-p, 75 ohms unbalanced, sync
negative
CONTROL S (IN/OUT)
Component Video Input
1
2 (Y, P , P )
B
R
P : 0.7 Vp-p, 75 ohms
B
P : 0.7 Vp-p, 75 ohms
R
RF Inputs
Converter
2
1
Speaker Output
Dimensions (W × H × D)
5W (L), 5W (R), 20W (Woofer)
KF-42WE610: 1,201 × 819 × 371 mm (47 /4 × 32 /4 × 14 /2 inches)
1
1
1
1
1
3
KF-50WE610: 1,377 × 928 × 452 mm (54 /4 × 36 /2 × 17 /4 inches)
3
1
KF-60WE610: 1,619 × 1,067 × 541 mm (63 /4 × 42 × 21 /4 inches)
KF-42WE610: 32 Kg (70 lb 12 oz) KF-50WE610: 39.5 kg (87 lb 1 oz),
KF-60WE610: 49.5 kg (109 lb 2 oz)
Mass
Power Consumption
In Use
210 W
In Standby
Under 1 W
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Information
Supplied Accessories
Remote Control
AA Batteries
Cleaning Cloth
Optional Accessories
TV Stand
RM-Y913
2 supplied for remote control
1
SU-GW1 (for KF-50/60WE610), SU-GW2 (for KF-42WE610)
Lamp
XL-2100U
AV Cable
VC-810S/820S/830S
Control S Cable
Component Video Cable
AV Receiver
RK-G69
VMC-10/30
STR series or equivalent
Memory Stick media
Memory Stick Media, Memory Stick Duo Media, Memory Stick Media with
Memory Select Function, Memory Stick PRO Media*
* Memory Stick PRO media features vary by and are dependent upon
the design of host hardware devices. Memory Stick PRO in this
projection TV has been tested to support up to 1 GB media capacity
and does not support high-speed transfer, MagicGate copyright
protection technology, or access control security features.
Design and specifications are subject to change without notice.
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Cable or an Antenna 25
Cable or Antenna 25
Camcorder 41
Digital TV Receiver 39
A
Activating a Twin View screen 50
Adding channels to the channel list 76
Adjusting audio, Steady Sound 72
ANT button 45
Antenna, connecting 25
Audio receiver, connecting 36
Audio/Video cable 24
Connector Types 24
Contents of box 17
CONTROL S 42
D
B
Digital TV
Balance, adjusting 72
Bass, adjusting 72
Batteries, inserting in remote 17
Bilingual audio 72
BN Smoother 71
connecting 39
watching 48
Digital TV program 48
Digital TV receiver, connecting 39
DISPLAY button 45
Display, turning off 45
DRC Mode 70
Brightness, adjusting 70
C
DVD player
using with TV remote control 88
with A/V connectors, connecting 38
with component video connectors, connecting 37
Cable
setting ON/OFF 76
with VCR, connecting 29
Cable box
E
connecting with VCR 30
using with TV remote control 89
Camcorder, connecting 41
Caption Vision 82
Channel list, adding channels 76
Channel Skip/Add 77
Channels
Enlarging pictures, in Twin View 52
F
Favorite Channel
setting up 76
using 49
FAVORITES button 44
Features 9
FREEZE button 44
FUNCTION button 44
Auto Program 76
creating labels 77
setting up 43
Cleaning Cloth 12
Closed caption modes 82
CODE SET botton 86
Color temperature, adjusting 70
Color, adjusting 70
Connecting
H
High Altitude 85
Hue, adjusting 70
I
Image Setup Menu 62
Audio receiver 36
101
Download from Www.Somanuals.com. All Manuals Search And Download.
Image Shift 85
Inputs, labeling 83
MTS/SAP button 45
MTS/SAP, using 47
Muting, using 46
J
N
NR 70
JUMP button 44
Jump, using 46
P
L
Label
Palette 71
Password, changing 79
Picture contrast, adjusting 70
PICTURE MODE button 44
Picture size, adjusting in Twin View 52
Playing Movies 63
POWER buttons (GREEN) 45
POWER/STANDBY 98
Presetting channels 43
Channels 77
video inputs 83
M
Memory Stick
Advance 65
Audio Select 65
Digi. Cam. Mode 66
File 66
Full Screen 61
Home Menu 65
Index Menu 60
inserting 57
R
Ratings
setting 80
viewing blocked programs 79
Remote control
Function of buttons 46
inserting batteries 17
Remote control, operating other components with
Cable box 89
Interval 65
Memory Stick Home 58
Movie Player 61
Playing Movies 63
Return 63
DVD player 88
Satellite receiver 89
VCR 88
Removing channels from the channel list 77
RESET button 45
Resetting
Slide Show 61
Start 65
Still Images 62
MEMORY STICK button 45
MENU button 45
Menus
Mild Mode 70
MODE
Audio options 72
Video options 69
S
S Video cable 24
Satellite receiver
connecting 33
using with TV remote control 89
Screen menu 74
Setting up channels 43
Sharpness, adjusting 70
Sleep 84
Pro 47
Standard 47
Vivid 47
(Continued)
102
Download from Www.Somanuals.com. All Manuals Search And Download.
Steady Sound
adjusting 72
Still Images 62
Surround sound 72
T
Timer
set current 84
Timer menu 84
Timer setting 84
Treble, adjusting 72
TV/VIDEO button 45
Twin View™
activating a picture 50
using 50
V
VCR
using with TV remote control 88
with cable box, connecting 30
with cable, connecting 29
with satellite receiver, connecting 34
Video inputs, labeling 83
Video Modes, selecting 69
Viewing area, recommended 20
VOL +/– button 44
W
WIDE MODE button 44
Z
Zoom feature, with Twin View 52
103
Download from Www.Somanuals.com. All Manuals Search And Download.
|