Sony MP3 Player CFD Z120 User Manual

3-859-139-11(1)  
CD Radio  
Cassette-Corder  
Operating Instructions  
CFD-Z110  
CFD-Z120  
CFD-Z130  
1996 by Sony Corporation  
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Table of contents  
Basic Operations  
4 Playing a CD  
6 Listening to the radio  
8 Playing a tape  
10 Recording on a tape  
The CD Player  
Additional Information  
20 Precautions  
12 Using the display  
13 Locating a specific track  
22 Troubleshooting  
24 Maintenance  
25 Specifications  
26 Index  
14 Playing tracks repeatedly  
(Repeat Play)  
15 Creating your own program  
(Program Play)  
Setting Up  
16 Hooking up the system  
19 Adjusting the audio emphasis  
(ROTARY EQUALIZER/  
MEGA BASS/SURROUND)  
Introduction  
3
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic Operations  
Playing a CD  
1
2,3 4  
For hookup instructions, see pages 16-18.  
Display  
1
2
Set FUNCTION to CD.  
Press OPEN/CLOSE to open the  
CD compartment and place the  
CD on the CD compartment.  
With the label side up  
3
Close the CD compartment.  
4
Press ^ .  
The player plays all the tracks  
once.  
Track number Playing time  
4
Basic Operations  
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use these buttons for additional operations  
VOLUME FUNCTION OPEN/CLOSE  
^
= / +  
p
To  
Do this  
Adjust the volume  
Stop playback  
Pause playback  
Turn VOLUME.  
Press p.  
Press ^.  
Press the button again to  
resume play after pause.  
Go back to the previous track  
Go to the next track  
Remove the CD  
Press =.  
Press +.  
Press OPEN/CLOSE.  
Turn off the player  
Set FUNCTION to  
TAPE (CD/RADIO OFF) .  
Basic Operations  
5
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listening to the radio  
1
2
For hookup instructions, see pages 16-18.  
1
2
Set FUNCTION to FM or AM to  
select the band you want.  
Turn TUNING to tune in a radio  
station.  
If the received FM stereo is too  
weak, the reception becomes  
monaural.  
6
Basic Operations  
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use these buttons for additional operations  
VOLUME FUNCTION  
To  
Do this  
Adjust the volume  
Turn off the radio  
Turn VOLUME .  
Set FUNCTION to  
TAPE (CD/RADIO OFF) .  
To improve broadcast reception  
Reorient the antenna for FM. Reorient the player itself  
for AM.  
For FM  
For AM  
Basic Operations  
7
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing a tape  
3 1  
2
For hookup instructions, see pages 16-18.  
1
2
Set FUNCTION to  
TAPE (CD/RADIO OFF) .  
Press p6 to open the tape  
compartment and insert a  
recorded tape. Use TYPE I  
(normal) tape only. Close the  
compartment.  
With the side you want  
to play facing forward  
3
Press (.  
The player starts playing.  
8
Basic Operations  
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Use these buttons for additional operations  
VOLUME  
0/)  
p6  
P
To  
Do this  
Adjust the volume  
Stop playback  
Turn VOLUME.  
Press p6.  
Fast-forward or rewind the tape  
Pause playback  
Press ) or 0.  
Press P.  
Press the button again to  
resume play after pause.  
Eject the cassette  
Press p6.  
Basic Operations  
9
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Recording on a tape  
3
2
1
For hookup instructions, see pages 16-18.  
1
2
Press p6 to open the tape  
compartment and insert a blank  
tape. Use TYPE I (normal) tape  
only.  
With the side you want to  
record on facing forward  
Select the program source you  
want to record.  
Display  
To record from the CD player, set  
FUNCTION to CD and insert a  
CD (see page 4).  
To record from the radio, set  
FUNCTION to FM or AM, and  
tune in the station you want (see  
page 6).  
10 Basic Operations  
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3
Press r to start recording. (( is  
depressed automatically).  
Tips  
Use these buttons for additional operations  
FUNCTION  
• Adjusting the volume or  
the audio emphasis (see  
page 19) will not affect  
the recording level and  
quality.  
• For the best results, use  
the AC power as a  
power source for  
recording.  
• To erase recording,  
proceed as follows:  
1 Insert the the tape  
whose recording you  
want to erase into the  
tape compartment.  
p6  
P
2 Set FUNCTION to  
TAPE (CD/RADIO  
OFF).  
To  
Do this  
3 Press r .  
Stop recording  
Pause recording  
Press p6.  
Press P.  
Press the button again to  
resume recording.  
Turn off the player  
Set FUNCTION to  
TAPE (CD/RADIO OFF).  
Basic Operations 11  
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The CD Player  
Using the display  
DISPLAY/ENTER  
You can check information about the CD  
using the display.  
Checking the total track numbers and playing  
time  
Check the display in stop mode.  
Total track numbers  
Total playing time  
Checking the remaining time  
Press DISPLAY/ENTER while playing a CD.  
To display  
Press DISPLAY/ENTER  
Remaining time on the  
current track*  
Once  
Remaining time on the CD  
and the number of tracks left  
Twice  
Playing time and the current  
track number  
Three times  
* For a track whose number is more than 20, the remaining  
time appears as “- -:- -” in the display.  
12 The CD Player  
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Locating a specific  
track  
You can quickly locate any track using  
the number buttons (CFD-Z120/Z130  
only). You can also find a specific point  
in a track while playing a CD.  
Number  
buttons  
=/+  
(CFD-Z120/Z130)  
Note (CFD-Z120/Z130  
To locate  
Press  
only)  
a specific track directly  
(CFD-Z120/Z130 only)  
a number button of the  
track.  
You cannot locate a  
specific track if “PGM”  
or ”SHUF REP” is lit in  
the display. Turn off  
the indication by  
a point while listening to  
the sound  
+ (forward) or =  
(backward) while playing  
and hold down until you  
find the point.  
pressing p.  
a point while observing  
the display  
+ (forward) or =  
(backward) in pause and  
hold down until you find  
the point.  
Tip (CFD-Z120/Z130  
only)  
When you locate a  
track numbered over  
10, press >10 first, then  
the corresponding  
number buttons.  
Example:  
To play track number  
23, press >10 first, then  
2 and 3.  
The CD Player 13  
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Playing tracks  
PLAY MODE  
^
repeatedly  
(Repeat Play)  
=/+  
You can play tracks repeatedly in  
normal, shuffle or program play modes  
(see page 15).  
FUNCTION  
1 Set FUNCTION to CD.  
Tip (CFD-Z120/130 only)  
You can select the  
2 Press PLAY MODE until the repeat mode you  
repeat mode on the  
remote control. Press  
MODE instead of  
want appears in the display.  
To repeat  
Select  
pressing PLAY MODE.  
a single track  
REP 1  
all the tracks  
REP ALL  
SHUF REP  
PGM REP  
tracks in random order  
programed tracks  
3 Do either of the following to start repeat play:  
When you’ve selected REP 1, select the track by  
pressing + or =, then press ^.  
When you’ve selected REP ALL and SHUF REP,  
press ^.  
When you’ve selected PGM REP, program  
tracks (see step 3 on page 15), then press ^.  
To cancel Repeat Play  
Press PLAY MODE until “REP” disappears in the  
display.  
14 The CD Player  
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Creating your  
DISPLAY/ENTER PLAY MODE  
^
own program  
(Program Play)  
You can arrange the playing order of the  
tracks on a CD.  
=/+  
FUNCTION  
Tips  
1 Set FUNCTION to CD.  
CFD-Z120/Z130 only:  
You can select the track  
on the remote control.  
Press the number  
2 Press PLAY MODE until “PGM” appears in the  
display.  
3 Press + or = then press DISPLAY/ENTER  
for the tracks you want to program in the order  
you want. You can program up to 20 tracks.  
buttons for the track  
instead of pressing  
+/= and  
DISPLAY/ENTER.  
• You can play the same  
program again, since  
the program is saved  
until you open the CD  
compartment or switch  
FUNCTION.  
Programed track  
Playing order  
• The current program  
will be erased if you  
switch FUNCTION or  
open the CD  
4 Press ^ to start program play.  
compartment.  
To cancel Program Play  
Press PLAY MODE until “PGM” disappears in the  
display.  
• You can record your  
own program. After  
you’ve created the  
program, insert a blank  
tape and press r to  
start recording.  
To check the order of tracks before play (CFD-Z120/  
Z130 only)  
Press DISPLAY/ENTER.  
Every time you press the button, the track number  
appears in the programed order.  
To change the current program  
Press p once if the CD is stopped and twice if the CD  
is playing. The current program will be erased. Then  
create a newprogram following the programing  
procedure.  
The CD Player 15  
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting Up  
Hooking up the  
system  
Speaker terminals  
Make sure you turn off the power before  
making any connections.  
Left  
speaker  
Right  
speaker  
AC IN  
Speaker cords  
Battery compartment  
To a wall outlet  
1 Hooking up the speakers  
1 Align the grooves and slide the speaker box down  
Tips  
until it snaps into place (A).  
• To detach the speakers,  
unlock speaker (see B  
on the diagram) and  
slide the speaker box all  
the way up and away  
from the player.  
• Connect the speakers  
for this unit only to the  
speaker terminals of  
this unit. If you connect  
any other speakers or  
equipment,  
malfunction may occur.  
2 Twist the speaker cable coating and strip it from  
the end of the cable.  
16 Setting Up  
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
3 Connect the black wires to (-) minus and the red  
wires to (+) plus terminals; the right speaker wires  
to the RIGHT and the left speaker wires to the  
LEFT terminals of SPEAKER OUTPUT.  
2 Connecting the AC power sources  
Insert one end of the supplied AC power cord to the  
AC IN socket located at the rear of the player, and the  
other end to the wall outlet.  
3 CFD-Z120/Z130 only: Inserting batteries  
into the remote  
Notes  
• When you operate the  
player on batteries, the  
backlight in the display  
does not light (CFD-  
Z130 only).  
• Use the AC power  
source whenever you  
record since recording  
consumes much power.  
Insert two size AA (R6) batteries (not supplied)  
Replacing batteries  
With normal use, the batteries should last for about  
six months. When the remote no longer operates the  
player, replace all the batteries with new ones.  
Tip  
Replace the batteries  
when the OPR/BATT  
indicator dims or when  
the player stops  
operating. Replace all  
the batteries with new  
ones. Before you  
4 Using the player on batteries  
Insert six size D (R20)  
batteries (not supplied)  
into the battery  
compartment.  
replace the batteries, be  
sure to take out the CD  
from the player.  
To use the player on  
batteries, disconnect the  
AC power cord from the  
player.  
continued  
Setting Up 17  
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Hooking up the system (continued)  
5 Listening through the headphones  
Insert the headphones to the PHONES jack at the rear.  
PHONES  
18 Setting Up  
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the  
SURROUND ROTARY EQUALIZER/  
MEGA BASS  
audio emphasis  
(ROTARY EQUALIZER/  
MEGA BASS/SURROUND)  
You can adjust the audio emphasis of the  
sound you are listening to.  
Selecting the sound characteristic  
Turn ROTARY EQUALIZER/MEGA BASS to select  
the audio emphasis you want.  
Frequency  
coverage  
Turn the control  
clockwise  
(to +10)  
Turn the control  
counterclockwise  
(to -10)  
MEGA BASS to increase heavy  
to decrease heavy  
bass sounds  
100Hz  
bass sounds  
1kHz  
to provide more  
presence of  
vocals  
to provide less  
presence of  
vocals  
10kHz  
to increase the  
brightness of the  
sound or to reduce  
tape hiss  
to decrease the  
brightness of the  
sound or to reduce  
tape hiss  
CFD-Z130 only: Reinforcing the surround  
effect  
Depress SURROUND.  
The dynamic sound, reproducing the concert-hall  
presence, is gained. To return to normal sound, press  
the button again.  
Setting Up 19  
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Additional Information  
Precautions  
On safety  
On placement  
• As the laser beam used in the CD  
player section is harmful to the eyes,  
do not attempt to disassemble the  
casing. Refer servicing to qualified  
personnel only.  
• Do not leave the player in a location  
near heat sources, or in a place subject  
to direct sunlight, excessive dust or  
mechanical shock.  
• Do not place the player on an inclined  
or unstable place.  
• Should any solid object or liquid fall  
into the player, unplug the player, and  
have it checked by qualified personnel  
before operating it any further.  
• Do not place anything within 10 mm  
of the side of the cabinet. The  
ventilation holes must be  
unobstructed for the player to operate  
properly and prolong the life of its  
components.  
On power sources  
• For AC operation, use the supplied  
AC power cord; do not use any other  
type.  
• If the player is left in a car parked in  
the sun, be sure to choose a location in  
the car where the player will not be  
subjected to the direct rays of the sun.  
• The player is not disconnected from  
the AC power source (mains) as long  
as it is connected to the wall outlet,  
even if the player itself has been  
turned off.  
• Since a strong magnet is used for the  
speakers, keep personal credit cards  
using magnetic coding or spring-  
wound watches away from the player  
to prevent possible damage from the  
magnet.  
• Unplug the player from the wall outlet  
when it is not to be used for an  
extended period of time.  
• For battery operation, use six size D  
(R20) batteries.  
On operation  
• If the player is brought directly from a  
cold to a warm location, or is placed in  
a very damp room, moisture may  
condense on the lenses inside the CD  
player section. Should this occur, the  
player will not operate properly. In  
this case, remove the CD and wait  
about an hour for the moisture to  
evaporate.  
• When the batteries are not to be used,  
remove them to avoid damage that  
can be caused by battery leakage or  
corrosion.  
• The nameplate indicating operating  
voltage, power consumption, etc. is  
located at the rear.  
• If the player has not been used for a  
long time, set it in the playback mode  
to warm it up for a few minutes before  
inserting a cassette.  
If you have any questions or problems  
concerning your player, please consult  
your nearest Sony dealer.  
20 Additional Information  
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Notes on CDs  
Notes on cassettes  
• Before playing, clean the CD with a  
cleaning cloth. Wipe the CD from the  
center out.  
• Break off the cassette tab from side A  
or B to prevent accidental recording. If  
you want to reuse the tape for  
recording, cover the broken tab with  
adhesive tape.  
Side A  
Tab for side A  
Tab for side B  
• Do not use solvents such as benzine,  
thinner, commercially available  
cleaners or anti-static spray intended  
for vinyl LPs.  
• To record on a tape with its tab broken  
off, cover the respective tab hole for  
side A or B with adhesive tape.  
• Do not expose the CD to direct  
sunlight or heat sources such as hot  
air ducts, nor leave it in a car parked  
in direct sunlight as there can be a  
considerable rise in temperature  
inside the car.  
• The use of a cassette with more than  
90 minutes of play time is not  
recommended except for long,  
continuous recording or playback.  
• Do not stick paper or sticker on the  
CD, nor scratch the surface of the CD.  
• After playing, store the CD in its case.  
If there is a scratch, dirt or fingerprints  
on the CD, it may cause tracking error.  
Additional Information 21  
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Symptom  
Remedy  
The power does not come on.  
• Connect the AC power cord securely.  
• Make sure the batteries are inserted correctly.  
There is no audio.  
• Make sure the FUNCTION selector is set to the  
function you want to operate.  
• Adjust the volume.  
• Unplug the headphones when listening through  
speakers.  
The audio is weak or has poor  
quality.  
• Replace all the batteries with new ones if they  
are weak.  
• Move the player away from the TV.  
The picture of your TV becomes  
unstable.  
• If you are listening to an FM program near the  
TV with an indoor antenna, move the player  
away from the TV.  
The CD does not play/“00 -- --“  
• Make sure that the CD compartment is closed.  
(CFD-Z110), “no disc”(CFD-Z120/ • Place the CD with the label surface up.  
Z130) lights in the display even  
when a CD is in place.  
• Clean the CD (see page 21).  
• Take out the CD and leave the CD compartment  
open for about an hour to dry moisture  
condensation.  
• Make sure the FUNCTION selector is set to CD.  
• Reduce the volume.  
The sound drops out.  
• Clean the CD, or replace it if the CD is badly  
damaged  
• Place the player in a location free from  
vibration.  
• Close the cassette compartment securely.  
The tape does not move when you  
press an operation button.  
The REC r button does not  
function/The tape does not play.  
• Make sure the safety tab on the cassette is in  
place.  
• Clean the erasing heads (see page 24).  
• Replace all the batteries with new ones if they  
are weak.  
The tape does not erase completely.  
22 Additional Information  
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Symptom  
Remedy  
The tape does not record.  
• Make sure the tape is inserted properly.  
• Make sure the safety tab of the cassette is  
in place.  
The audio is weak/The audio  
quality is poor.  
• Clean the heads, pinch roller and capstan  
(see page 24).  
• Demagnetize the heads using a  
demagnetizer (see page 24).  
The sound is distorted.  
• The TYPE II (high position) or TYPE IV  
(metal) tape is being used. Use TYPE I  
(normal) tape only.  
The remote does not function.  
• Replace all the batteries in the remote with  
new ones if they are weak.  
• Make sure that you are pointing the  
remote at the remote sensor on the player.  
• Remove any obstacles in the path of the  
remote and the player.  
• Make sure the remote sensor is not  
exposed to strong light such as direct  
sunlight or fluorescent lamp light.  
• Move closer to the player when using the  
remote.  
After trying the above remedies, if you still have problems, unplug the AC power cord and  
remove all the batteries. After all the indications in the display disappear, plug the power cord  
and insert the batteries again. If the problem persists, please consult your nearest Sony dealer.  
Additional Information 23  
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Maintenance  
Cleaning the lens  
Demagnetizing the tape heads  
If the lens becomes dirty, it may cause a  
skipping of sound during CD operation.  
Clean with a commercially available  
blower.  
After 20 to 30 hours of use, enough  
residual magnetism will have built up  
on the tape heads to begin to cause loss  
of high frequency sound and hiss. At  
this time, you should demagnetize the  
heads and all metal parts in the tape  
path with a commercially available tape  
head demagnetizer.  
Cleaning the tape heads and tape  
path  
Wipe the heads, the pinch roller and the  
capstan with a cleaning swab slightly  
moistened with cleaning fluid or alcohol  
after every 10 hours of operation for  
optimum playback and recording  
quality. To make the best possible  
recording, however, we recommend that  
you clean all surfaces over which tape  
travels before each recording.  
Cleaning the cabinet  
Clean the cabinet, panel and controls  
with a soft cloth slightly moistened with  
a mild detergent solution. Do not use  
any type of abrasive pad, scouring  
powder, or solvent, such as alcohol or  
benzine.  
Capstan  
Erase head  
Record/playback head  
Pinch roller  
Lens  
After cleaning, insert a tape when the  
areas cleaned are completely dry.  
24 Additional Information  
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
AUDIO POWER SPECIFICATIONS  
POWER OUTPUT AND TOTAL  
HARMONIC DISTORTION  
With 3.2-ohm loads, both channel driven  
from 150 - 10,000 Hz; rated 2 W per channel-  
minimum RMS power, with no more than  
10 % total harmonic distortion in AC  
operation.  
General  
Speaker  
Full range: 10 cm dia., 3.2 ohms, cone type (2)  
Tweeter: 2cm (2)  
Outputs  
Headphones jack (stereo minijack)  
For 16 - 68 ohms impedance headphones  
Power output (excluding U.S. model)  
2 .3 W + 2.3 W (3.2 ohms at 10 % harmonic  
distortion in DC operation)  
Power requirements  
Other Specifications  
CD player section  
For CD radio cassette-corder:  
230 V AC, 50 Hz (Australian model)  
120 V AC, 60 Hz (Other models)  
System  
9 V DC, 6 size D (R20) batteries  
For remote controller (CFD-Z120/Z130 only):  
3 V DC, 2 size AA (R6) batteries  
Power consumption  
AC 20 W  
Battery life  
Compact disc digital audio system  
Laser diode properties  
Material: GaAlAs  
Wave length: 780 nm  
Emission duration: Continuous  
Laser output: Less than 44.6 µW  
(This output is the value measured at a distance of  
about 200 mm from the objective lens surface on  
the optical pick-up block with 7 mm aperture.)  
For CD radio cassette-corder:  
FM recording  
Sony R20P: approx. 13.5 h  
Sony alkaline LR20: approx. 19 h  
Tape playback  
Spindle speed  
200 r/min (rpm) to 500 r/min (rpm) (CLV)  
Number of channels  
2
Frequency response  
20 - 20,000 Hz +1/-2 dB  
Wow and flutter  
Sony R20P: approx. 7.5 h  
Sony alkaline LR20: approx. 12 h  
CD playback  
Below measurable limit  
Radio section  
Sony R20P: approx. 2.5 h  
Sony alkaline LR20: approx. 4.5 h  
Frequency range  
FM: 87.6 - 108 MHz  
AM: 530 - 1,605 kHz (Australian model)  
530 - 1,710 kHz (Other models)  
Aerials  
Dimensions  
Approx. 520 × 253 × 256 mm (w/h/d)  
FM: Telescopic aerial  
AM: Built-in ferrite bar aerial  
(20 1  
Mass  
Approx. 5.7 kg (12 lb. 9 oz) (incl. batteries)  
Supplied accessory  
2  
×10 ×10 18 inches) (incl. projecting parts)  
Cassette-corder section  
Recording system  
4-track 2 channel stereo  
Fast winding time  
AC power cord (1)  
Remote controller (1) (CFD-Z120/Z130 only)  
Approx. 115 s (sec.) with Sony cassette C-60  
Frequency response  
Design and specifications are subject to change without  
notice.  
TYPE I (normal): 70 - 10,000 Hz  
Optional accessories  
Sony MDR headphones series  
Additional Information 25  
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Index  
A
I, J, K  
Improving broadcast  
reception 7  
R
Audio emphasis 19  
Recording on a tape 10  
Repeat Play 14  
ROTARY EQUALIZER 19  
B
L
Batteries for player 17  
Listening to the radio 6  
Locating a specific track 13  
S
Selecting tracks 5  
Setting up 16  
SURROUND 19  
C
CD player 12  
Choosing power sources 17  
Cleaning  
M, N, O  
MEGA BASS 19  
T
cabinet 23  
lens 23  
tape heads and tape path  
23  
Creating your own  
program 15  
Troubleshooting 22  
P, Q  
Playing  
a CD 4  
a tape 8  
radio stations 6  
tracks repeatedly 14  
Power sources 17  
Program Play 15  
U, V, W, X, Y, Z  
Using the display 12  
D, E, F, G  
Demagnetizing the tape  
heads 24  
Display 12  
H
Headphones 18  
Hooking up  
power sources 17  
speakers 16  
26 Additional Information  
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sony Corporation Printed in China  
CFD-Z110/Z120/Z130.E.3-859-139-1X.U/CA/AU6/E92  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sennheiser Radio 820 S RF User Manual
Sharp Air Cleaner KC 840E User Manual
Snapper Lawn Aerator 4529 User Manual
Sony Blu ray Player BDP S1000ES User Manual
Sony Computer Monitor SDM S@04 User Manual
Sony Webcam SNT V304 User Manual
Speed Queen Clothes Dryer HE4070 User Manual
Sportline Heart Rate Monitor SP1971IS01SPO User Manual
SUPER MICRO Computer Computer Hardware X6DH8 G2 User Manual
Suzuki Automobile 2010 Kizashi User Manual