Read this first
n N
2
RealPlayer is a trademark or registered trademark of RealNetworks, inc. in the U.S. and other countries.
Symantec Norton AntiVirus is a trademark of Symantec Corporation.
WinDVD is a trademark or registered trademark of InterVideo Inc.
All other names of systems, products and services are trademarks of their respective owners. In the manual, the ™ or ® marks are not
specified.
Specifications are subject to change without notice.
®
ENERGY STAR
As an ENERGY STAR® Partner, Sony has determined that this product meets the ENERGY STAR® guidelines for energy efficiency.
The International ENERGY STAR® Office Equipment Program is an international program that promotes energy saving through the use
of computers and their office equipment. The program backs the development and dissemination of products with functions that
effectively reduce energy consumption. It is an open system in which business proprietors can participate voluntarily. The targeted
products are office equipment such as computers, displays, printers, facsimiles and copiers. Their standards and logos are uniform
among participating nations.
ENERGY STAR is a U.S. registered mark.
.
Download from Www.Somanuals.com. All Manuals Search And Download.
Read this first
n N
3
Safety information
Owner's record
The model number and serial number are located on the bottom of your Sony notebook. Record the serial number in the space provided
here. Refer to the model and serial number if you contact VAIO-Link.
Serial number: ________________________
Model number (model name in brackets):
PCG-9E7M (PCG-FX701), PCG-9E6M (PCG-FX702), PCG-9E5M (PCG-FX705)
Warnings
General
❑ Opening the unit, for whatever reason, could lead to damages that are not covered by the guarantee.
❑ To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.
❑ To prevent fire or shock hazard, do not expose your VAIO notebook to rain or moisture.
❑ Avoid using the modem during a severe electrical storm.
❑ Do not use the modem or a telephone to report a gas leak in the vicinity of the leak.
❑ To change the backup battery, please contact your nearest Sony Service Center.
❑ Before you connect peripherals, turn off the computer and all peripherals.
❑ Connect the power cord only after connecting all cables.
❑ Turn on the computer only after turning off all peripherals.
❑ The magnetic properties of some objects can have serious consequences for your hard disk drive. They
can erase the data on the hard disk drive and cause the computer to malfunction. Do not place your
computer near or on any objects which emit magnetic fields, mainly:
❑ TV sets
Download from Www.Somanuals.com. All Manuals Search And Download.
Read this first
n N
4
❑ Speakers
❑ Magnets
❑ Magnetic bracelets.
Audio/video
❑ Audio and picture distortion may occur if this equipment is positioned in close proximity to any
equipment emitting electromagnetic radiation.
Connectivity
❑ Never install modem or telephone wiring during a severe lightning storm.
❑ Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
❑ Be cautious when installing or modifying telephone lines.
❑ Use your notebook only with the supplied AC adapter. To disconnect your notebook completely from
mains voltage, unplug the AC adapter.
❑ Please make sure that the socket outlet is easily accessible.
❑ Never touch uninsulated telephone wire or terminals unless the telephone line has been disconnected
at the network interface.
Optical disc drive
❑ Misuse of the optical instruments supplied with your notebook can cause eye hazard. As the laser beam
used in this product is harmful to eyes, do not attempt any disassembling process. For servicing, refer to
qualified personnel only.
❑ There are visible and invisible radiations when the optical disc drive is open: avoid direct exposure to the
laser beam.
Download from Www.Somanuals.com. All Manuals Search And Download.
Read this first
n N
5
Regulatory information
Sony hereby declares that this product is in compliance with the essential requirements and other relevant provisions of European
Directive 1999/5/EC (radio equipment and telecommunications terminal equipment Directive).
This product complies with EN 55022 Class B and EN 55024 for use in following areas: residential, commercial and light-industrial.
This product has been tested and found compliant with the limits set out in the EMC Directive for using connection cables not longer
than 3 metres (9.8 feet).
Before activating the built-in modem, you are invited to read the Modem Regulations flyer.
The optical disc drive is classified as a CLASS 1 LASER PRODUCT and complies with the Laser Product Safety Standard EN 60825-1. Repair
and maintenance only by authorized Sony technicians. Improper repairs and use can create safety hazards.
CLASS 1
LASER PRODUCT
TO EN 60825-1
Download from Www.Somanuals.com. All Manuals Search And Download.
Read this first
n N
6
Disposing of lithium ion batteries
Do not handle damaged or leaking lithium ion batteries. Dispose of promptly and properly.
Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type
recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions.
The battery pack used in this device may present a fire or chemical burn hazard if mistreated. Do not
disassemble, heat above 60°C (140°F) or incinerate.
Dispose of used batteries promptly and properly.
Keep away from children.
Your notebook is equipped with an internal backup memory battery. For information on changing this
battery, please contact VAIO-Link:
http://www.vaio-link.com
In some areas the disposal of lithium ion batteries in household or business waste may be prohibited.
Use the public collection system.
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
n N
7
Welcome
audio, video, computing and communications to provide you with state-of-the-art personal computing.
Here are just some of the features your VAIO notebook has to offer.
❑ Exceptional performance - Your PC includes a fast processor, a fast CD-RW/DVD-ROM drive* or
DVD-ROM drive* and an internal modem.
❑ Portability - The rechargeable battery pack provides hours of use without AC power.
❑ Sony audio and video quality - A high-resolution LCD screen enables you to take advantage of today’s
advanced multimedia applications, games, and entertainment software.
❑ Multimedia features – Enjoy audio and video CDs.
❑ Interconnectivity – Your computer has Ethernet and i.LINK™ functionalities. i.LINK™ is a bidirectional
digital interface for exchanging data.
®
®
❑ Windows - Your system includes Microsoft’s Windows XP Home operating system.
❑ Communications - Access popular online services, send and receive e-mails, browse the Internet.
❑ Excellent customer support - If you are experiencing any problems with your computer, please check
the VAIO-Link website for a possible solution:
http://www.vaio-link.com
Before contacting VAIO-Link, you may try to solve the problem by reading this user guide or the manuals
and help files for the peripherals or software.
* Depending on your model. Read the Specifications document.
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
n N
8
Documentation pack
Your documentation pack contains printed information as well as online user guides on your computer's
hard drive and on the application CD-ROM.
Printed documentation
❑ A Getting Started brochure, where you will find a brief description of the items in your box, some
specifications of your notebook, and how to set up your notebook;
❑ A Customer Guide, where you will find all the basic information you need to start using your notebook
as well as troubleshooting and VAIO-Link information;
❑ Your Sony Guarantee conditions;
❑ A Safety Regulations flyer;
❑ A Modem Regulations flyer applying to the modem.
Online documentation
1
The Hardware Guide:
❑ Using your notebook shows you how to use the standard components of your system. In this part
of the manual you will also find out what you can do with a Memory Stick™.
❑ Connecting Peripheral Devices explains how you can add functionality by connecting various
peripherals.
❑ Getting Help explains the support options available to you, and offers basic troubleshooting tips.
❑ Precautions provides facts and advice about using your notebook.
❑ Glossary refers to terms used in this manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
n N
9
2
Refer to your Software Guide for information on the bundled software and the Sony applications.
❑ About the Software is a short description of the features of the software pre-installed on your
system.
❑ Using Video software explains how to use Sony video software: DVgate, MovieShaker and Smart
Capture.
❑ Managing audio files with SonicStage explains how to convert your existing MP3, WMA and
WAV format audio files into ATRAC3 format.
❑ Using DigitalPrint explains how you get the most enjoyment out of your photographs taken with
a digital camera.
❑ Customizing your notebook explains how to set your system and power management.
application.
❑ Managing drivers explains how to install, update or uninstall a driver.
❑ Using the Product Recovery CD-ROMs explains how to perform a system and application recovery.
❑ Using partitioned drives tells you what you can do with partitioned drives.
3
4
Refer to the Specifications online document for details on your computer, drivers and accessories.
In the VAIO-Link Customer Service Guide you will find all the VAIO-Link information you need,
including specific contact numbers and addresses for each country.
5
Consult the Online Help files of the software you are using for detailed information on features and
troubleshooting.
®
6
7
Refer to the Microsoft Quick Start manual for more information on Windows .
Go to http://www.club-vaio.sony-europe.com to find online tutorials about your favourite VAIO
software.
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
n N
10
Your notebook and its accessories
The following hardware items are in the box:
1
2
3
4
5
main unit
6
7
8
9
weight saver
video cable
phone cable
power cord
product recovery CD-ROMs
documentation pack
AC adapter
rechargeable battery pack
If you find an extra phone plug in the box, see Using the correct phone plug (page 58).
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
n N
11
Ergonomic considerations
You will be using your notebook as a portable device in a variety of environments. Whenever possible, you
should attempt to take account of the following ergonomic considerations to both stationary and portable
environments:
❑ Positioning your computer – Place the computer directly in front of you (1). Keep your forearms
horizontal (2), with your wrists in a neutral, comfortable position (3) while using the keyboard,
touchpad, or external mouse. Let your upper arms hang naturally at your sides. Have breaks during
sessions with your computer. Excessive use of the computer may strain muscles or tendons.
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
n N
12
❑ Furniture and posture – Sit in a chair with good back support. Adjust the level of the chair so your feet
are flat on the floor. A footrest may make you more comfortable. Sit in a relaxed, upright posture and
avoid slouching forward or leaning far backwards.
❑ Viewing angle of the computer’s display – Use the display’s tilting feature to find the best position.
You can reduce eye strain and muscle fatigue by adjusting the tilt of the display to the proper position.
Adjust the brightness setting of the display as well.
❑ Lighting – Choose a location where windows and lights do not create glare and reflection on the
display. Use indirect lighting to avoid bright spots on the display. You can also purchase accessories for
your display that help reduce glare. Proper lighting adds to your comfort and work effectiveness.
❑ Positioning an external display – When using an external display, set the display at a comfortable
viewing distance. Make sure the display screen is at eye level or slightly lower when you are sitting in
front of the monitor.
❑ Tilt stands – You use the tilt stands to place the computer at an angle that allows comfortable typing.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
13
Using your notebook
This section describes how to start using your computer and how to use your computer’s internal and
external devices.
❑ Starting your notebook (page 27)
❑ Shutting down your notebook (page 28)
❑ Using the keyboard (page 29)
❑ Using the touchpad (page 34)
❑ Using the CD-RW/DVD-ROM or DVD-ROM drive (page 35)
❑ Using the weight saver (page 39)
❑ Using the floppy disk drive (page 41)
❑ Using PC Cards (page 45)
❑ Using the Memory Stick™ (page 48)
❑ Using the modem (page 57)
❑ Using power saving modes (page 59)
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
16
Front
1
2
3
4
5
6
7
8
9
LCD screen
(page 33)
(page 71)
(page 29)
(page 34)
(page 34)
(page 32)
speakers
keyboard
touchpad
left/right buttons
power indicators
battery 1 and 2 indicators (page 32)
hard disk drive indicators (page 32)
Num Lock indicators
(page 32)
(page 32)
(page 32)
10 Caps Lock indicators
11 Scroll Lock indicators
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
17
Back
1
2
3
4
phone line jack
(page 57)
(page 73)
/
5
6
7
8
monitor (VGA) connector (page 66)
USB port
Ethernet connector
USB port
(page 78)
(page 73)
(page 19)
serial connector
printer connector
(page 74)
DC In connector
❑ There is a ventilation slot located near the second USB connector. Do not cover the ventilation slot when the computer is on.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
19
Connecting a power source
You can use either an AC adapter or a rechargeable battery pack as a power source.
Using the AC adapter
To use the AC adapter, proceed as follows:
1
2
3
Plug the cable attached to the AC adapter (1) into the DC In connector (2) on the computer.
Plug one end of the power cord (3) into the AC adapter.
Plug the other end of the power cord into an AC outlet.
❑ Use your notebook only with the supplied AC adapter.
To disconnect your notebook completely from mains voltage, unplug the AC adapter.
Make sure that the socket outlet is easily accessible.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
20
Using the battery pack
You can use one or two batteries as a source of power. You can insert the second battery pack into the multi-
purpose bay on the right side of the computer. Additional battery packs are available as a separate option.
The battery pack supplied with your computer is not fully charged at the time of purchase.
Inserting the battery pack
To insert the battery pack, proceed as follows:
1
Open the cover of the battery bay.
2
Insert the battery pack with the label facing down into the battery bay on the left side of the computer.
3
Close the cover of the battery bay until it clicks.
❑ When the computer is directly connected to AC power and has a battery pack inserted in the battery bay, it uses power from the AC outlet.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
21
Charging the battery pack
To charge the battery pack, proceed as follows:
1
2
Connect the AC adapter to the computer.
Insert the battery pack.
The computer automatically charges the battery (1) (the battery indicator (2) light flashes in a double
blink pattern as the battery charges). When the battery is 85% full, the battery indicator light turns off.
This process takes approximately 2.5 hours if your notebook is on. To charge the battery completely,
continue charging for an additional hour.
There are two battery indicator lights on the computer:
1
2
Indicates the status of the battery pack in the battery bay on the left side of the computer.
Indicates the status of the battery pack in the multi-purpose bay on the right side of the computer.
battery indicator meaning
light status
On
The computer is using battery power.
The battery is running out of power.
The battery is charging.
Single blink
Double blink
Off
The computer is using AC power.
❑ When the battery is running out of power, both the battery and power indicators blink.
Keep the battery pack in the computer while it is directly connected to AC power. The battery pack continues to charge while you are using the
computer.
If the battery level falls below 10%, you should either attach the AC adapter to recharge the battery or shut down your computer and insert a fully
charged battery.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
22
The battery pack supplied with your computer is a lithium ion battery and can be recharged any time. Charging a partially discharged battery does
not affect battery life.
The battery indicator light is on while you use the battery pack as a power source. When the battery life is nearly depleted, the battery indicator starts
flashing.
For some software applications and some peripheral devices, your computer may not enter Hibernate mode when battery life is low. To avoid loss
of data when using battery power, you should save your data frequently and manually activate a power management mode, such as Standby or
Hibernate.
When the computer is directly connected to AC power and has a battery pack inserted in the battery bay, it uses power from the AC outlet.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
23
Removing the battery pack
To remove the battery pack, proceed as follows:
1
2
3
Turn off the computer.
Open the cover of the battery bay.
Pull out the battery pack.
4
Close the cover of the battery bay.
❑ You may lose data if you remove the battery pack while the computer is on and not connected to the AC adapter or if you remove the battery while
the computer is in Standby mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
24
Using the second battery pack
You can purchase a second rechargeable battery pack. With two battery packs, you can extend the time you
use your computer with battery power. When using two battery packs, the battery pack you insert first,
charges first. The battery pack you insert second, charges when the first battery pack is 85 percent full. You
can monitor which battery pack is charging by observing the battery indicator lights.
Inserting the second battery pack
To insert a second battery pack, proceed as follows:
1
2
3
4
If the weight saver or the floppy disk drive is in the multi-
purpose bay (1), remove the device (see (page 41)).
Insert the battery pack (2) into the multi-purpose bay.
The battery 2 indicator light turns on.
Attach the weight saver (3) to the computer to stabilize
the battery pack.
Slide the eject lever on the bottom of the weight saver
towards the front of the computer to lock it.
❑ If you attach two battery packs, you can remove one of them without shutting
down the computer. When removing one battery pack, make sure that the other
battery pack indicator is on.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
25
Charging the second battery pack
To charge the second battery pack, proceed as follows:
Keep the battery pack (1/3) in the computer while it is connected to AC power.
The battery indicator stops flashing when the battery is 85% full.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
26
Removing the second battery pack
To remove the second battery pack, proceed as follows:
1
2
Slide the eject lever on the bottom of the weight saver in the direction of arrow 1.
Slide the release lever on the bottom of the computer in the direction of arrow 2.
3
4
5
Remove the weight saver.
Pull out the battery pack.
Reinsert the weight saver.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
27
Starting your notebook
To start your computer, proceed as follows:
1
2
3
Slide the LCD lock lever (1) in the direction of the arrow, and lift the cover.
Press the power button (2) of the computer until the green power indicator (3) light turns on.
If necessary, adjust the brightness on the LCD display. To increase brightness, hold down the <Fn> key
and press <F5> repeatedly. To decrease brightness, hold down the <Fn> and <Shift> keys and press <F5>
repeatedly.
®
❑ <Fn>+<F5> is only possible if Windows is running.
If you press the power button for more than four seconds, the computer will turn off.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
28
Shutting down your notebook
It is important that you shut down your computer properly so you do not lose unsaved data.
To shut down your computer, proceed as follows:
®
1
2
Click the Start button on the Windows taskbar.
Click Turn Off Computer.
The Turn off computer dialog box appears.
3
4
Select Turn Off.
Wait for your computer to turn off automatically.
The power indicator turns off.
5
Turn off any peripheral connected to your computer.
❑ Respond to any prompts warning you to save documents.
If you are unable to shut down your computer:
- Close all software in use.
- Remove the PC Cards, if inserted. To do so, double-click the Safely Remove Hardware icon in the taskbar. Select the hardware you want to unplug
and click Stop.
- Disconnect any USB devices.
- Press the <Ctrl>+<Alt>+<Delete> keys at the same time. If you have not changed the default settings, the Task Manager will appear. Select
Shut Down then Turn Off.
- Press <Alt>+<F4> to see the Turn off computer window, and click Turn Off.
If this does not work, you can press the power button for more than four seconds. This will shut down the computer. This operation may result in data
loss.
If you want to shut down the computer for a short period only, you can save power by using the Standby mode (see Using power saving modes
(page 59)).
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
30
Keys
Descriptions
Escape key (1)
The <Esc> (Escape) key is used to cancel commands.
Function keys (2)
The twelve function keys along the top of the keyboard are used to perform
designated tasks. For example, in many applications, <F1> is the Help key. The
tasks associated with each function key may vary from one application to the
other.
Print Screen key (3)
The <Print Screen> key takes an electronic snapshot of the screen and moves
it to the Windows Clipboard. You can then paste the screenshot into a
document and print it.
Correction keys (4)
Navigation keys (5)
The <Insert>, <Back Space> and <Delete> keys enable you to make
corrections.
These keys enable you to move the cursor on the screen.
The Application key displays a shortcut menu; pressing this key is equivalent
to clicking the right mouse button.
Application key (6)
Numeric keypad area (7) Contains the keys found on a typical calculator. Use the numeric keypad area
to type numbers or to perform mathematical calculations such as addition and
subtraction. Note that you must press the <Num Lock> key to activate the
numeric keypad. When you do so, the Num Lock light illuminates.
Operator keys (8-11-12)
Several keys are always used with at least one other key: <Ctrl>, <Alt>, and
<Shift>. When held down with another key, the <Ctrl> (Control) and <Alt>
(Alternate) keys offer another way to execute commands. For example, in
many applications, instead of choosing the Save command from a menu, you
can hold down <Ctrl> and press <S> (referred to as <Ctrl>+<S>). The <Shift>
key is used to produce capital letters or special symbols such as @ and $.
The key with the Windows® logo displays the Windows® Start menu; it is
equivalent to clicking the Start button on the taskbar.
Windows® key (9)
<Fn> key (10)
The <Fn> key is used in combination with other keys to execute commands.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
31
®
Combinations and functions with the Windows key
Combinations
Functions
+ F1
Displays the Windows® Help and Support
Center.
+ Tab
+ E
Switches the selected button on the taskbar.
Displays My Computer.
+ F
Displays the Search Results window to find a file
or folder. This is equivalent to selecting Search
from the Start menu.
+ Ctrl + F
+ M
Displays the Search Results - Computers window
where you can locate other computers.
Minimizes all displayed windows.
Shift +
+ M
Returns all minimized windows to their previous
size.
+ R
Displays the Run window. This is equivalent to
selecting Run from the Start menu.
Fn +
+ Insert Displays the System Properties window. This is
equivalent to double-clicking the System icon in
the Control Panel or right-clicking My Computer
(then click Properties) from the Start menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
32
Indicators
Indicator
Functions
Power on: lights green.
Power
Standby mode: flashes umber.
Indicates the status of the battery
inserted in the battery bay on the left
side of the computer.
Battery 1
Indicates the status of the battery
inserted in the battery bay on the right
side of the computer.
Battery 2
Light
On
Off
Data is read from or written to the hard The hard drive is not being accessed.
drive.
Hard disk
Num Lock
Turns on when the number keys in the Turns off when the alphanumeric
numeric keypad are active.
character keys in the keypad area are
active.
Turns on when the characters appear in Turns off when the characters appear in
uppercase as you type. The <Shift> key lowercase as you type (unless you hold
Caps Lock
Scroll Lock
lowers the case of typed letters when
down the <Shift> key).
Caps Lock is on.
Turns on when the screen scrolls
Turns off when the information moves
differently (depends on the application, across the display normally.
no effect in many applications).
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
33
Combinations and functions with the <Fn> key
Combinations/ Feature
Functions
Toggles the built-in speaker on and off.
<Fn> +
(F3): speaker switch
(F4): speaker volume
Adjusts the built-in speaker volume.
<Fn> +
To increase volume, hold down the <Fn> key and press <F4> repeatedly.
To decrease volume, hold down the <Fn> and <Shift> keys and press <F4> repeatedly. The
volume is adjusted immediately, without a prompt or popup window as a guide.
Adjusts the brightness of the LCD.
<Fn> +
(F5): brightness control
To increase light intensity, hold down the <Fn> key and press <F5> repeatedly.
To decrease light intensity, hold down the <Fn> and <Shift> keys and press <F5>
repeatedly. You can see the brightness changing immediately on the screen.
Toggles between the LCD, external display (connected to the monitor connector) and both
LCD and external display.
<Fn> +
external display
/
(F7)*: switch to the
(F8)*
Toggles between the LCD and both LCD and TV.
<Fn> +
/
Puts the system into Standby mode, a power management state. To return the system to
the active state, press any key.
<Fn> +
(ESC) and <Fn> +
(F12):
Standby
You can choose to use these shortcuts for Hibernate mode (the lowest level of power
consumption) instead. To do this, go to Control Panel > Power Options, and make your
settings on the Advanced tab under Power buttons.
For details on power management, see the section Using power saving modes
(page 59).
❑ * This function can only be used by the first user to log on. It will not work if you have switched to another user account.
®
Some functions are not available until Windows is launched.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
34
Using the touchpad
The keyboard contains a cursor-pointing device, your touchpad (1). You can point to, select, drag, and scroll
objects on the screen using the built-in touchpad.
Action
point
Description
Slide one finger on the touchpad to place the pointer (2) on an item or object.
Press the left button (3) once.
click
double-click
right-click
Press the left button twice.
Press the right button (4) once. In many applications, this action displays a shortcut
menu.
drag
Slide one finger while pressing the left button.
scroll
Move your finger along the right edge of the touchpad to scroll vertically. Move
your finger along the bottom to scroll horizontally (the scroll function is available
only with applications that support a touchpad scroll feature).
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
35
Using the CD-RW/DVD-ROM or DVD-ROM drive
Depending on your model, your computer is equipped with a CD-RW/DVD-ROM drive or a DVD-ROM drive.
To insert a disc, proceed as follows:
1
2
Turn on the computer.
Press the eject button (1) to open the drive.
The tray slides out.
3
Place a disc in the middle of the tray with the label side facing up until the disc clicks into place.
4
Close the tray by pushing it gently.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
36
❑ When the computer is in Standby or Hibernate mode, you cannot insert or remove a disc.
Be sure to seat the disc firmly over the disc drive hub fingers. If you do not seat the disc firmly, you could damage your disc drive and you may not be
able to open the tray.
When you finish using a disc, wait until the LED indicator turns off and then press the eject button to remove the disc.
If the disc does not come out when you press the Eject button, go to My Computer. Select the drive, click the right button of your mouse and select
Eject. If it still does not work, turn off the computer and insert a thin, pointed object into the manual eject hole.
Using the CD-RW function (PCG-FX702 and PCG-FX705 only)
Depending on your model, your notebook is equipped with a CD-RW/DVD-ROM combined drive.
To burn CDs, you can use CD-RW and CD-R discs:
❑ The CD-RW (CD-ReWriteable) disc is a data memory medium that can be used to write, erase and rewrite
a program or other data.
❑ The CD-R (CD-Recordable) disc is a data memory medium that can be used to write a program or other
data, but once only.
To achieve optimum performance when writing data on a CD-RW disc, follow these recommendations :
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
37
❑ To make a CD-R’s data readable on a CD-ROM drive, you need to close the session when you eject it. To
complete this process, follow the instructions included with your software.
❑ Only use circular discs. Do not use discs with any other shape (star, heart, card, etc.), as this may damage
the CD-RW drive.
❑ Do not strike or shake the computer while writing data to a disc.
❑ For optimal writing speed, deactivate the screensaver before writing data to a disc.
❑ Memory-resident disc utilities may cause unstable operation or data loss. Deactivate these utilities before
writing data to a disc.
❑ For best results, use CD-Rs that are compatible with 4x speed, as the software pre-installed on your
computer is preset to that speed. Your VAIO notebook does not support 1x writing speed.
❑ When using your software application to burn CDs, be sure to exit and close all other applications.
❑ Never touch the surface of the disc. Fingerprints and dust on the surface of a disc may cause writing
errors.
❑ Do not put your VAIO notebook into a power saving mode while using the pre-installed software.
Using the DVD function
To achieve optimum performance when playing DVD-ROM discs, you should follow these recommendations.
❑ You can play DVDs using the DVD-ROM drive and the WinDVD software. See the help file on the WinDVD
software for details.
❑ Your computer should not be connected to the port replicator while playing DVD movies or using DVD
applications.
❑ Close all open applications before playing a DVD-ROM movie.
❑ When playing DVD movies on battery power, set the power management profile to DVD. With other
profiles, the movies can be choppy.
❑ Do not switchDpoowwnloeardsfraovminWgwwm.Soodmeansuwalsh.ciolem.pAllal Myainnugalas SDeaVrcDh AvniddeDoow. nload.
Using your notebook
n N
38
❑ Do not use resident disc utilities or resident utilities to speed up the access of discs, because they may
cause the system to become unstable.
❑ Make sure that the screensaver is deactivated.
❑ Region codes indicators are labelled on the DVD discs to indicate in which region and on what type of
player you can play the disc. Unless a '2' (Europe belongs to region '2') or 'all' (this means that you can
play this DVD everywhere in the world) is labelled on your DVD disc or on the packaging, you cannot
play the disc on this player.
❑ Do not try to change the region code settings of the DVD-ROM drive. Any difficulties caused by changing
the region code settings of the DVD-ROM drive are out of warranty.
❑ When a TV is connected, a part of the video screen will not appear with the factory settings. Adjust the
display resolution to 640 x 480.
❑ When playing a DVD movie, you can use the <Fn>+<F7> or <Fn>+<F8> combinations to toggle between
the notebook display and a connected external display. Should you need to have both screens on, the
movie will only be played on the ’primary’ monitor (by default, the notebook screen). To make the
external display the primary monitor, go to Control Panel > Appearance and Themes > Display. On
the Settings tab, click Advanced and change the settings on the Displays tab. See your Software
Guide for more details on the customizing the display.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
39
Using the weight saver
The weight saver protects the multi-purpose bay when it is empty.
To attach the weight saver, proceed as follows:
1
2
If another device is in the multi-purpose bay, remove the device (see (page 41)).
Pull out the guide (1) of the weight saver and slide the weight saver in the direction of the arrow (2) until
it clicks.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
41
Using the floppy disk drive
Your computer is equipped with a floppy disk drive which can be removed. When you are not using it, you
can replace it with the bundled weight saver.
Removing the floppy disk drive
To remove the floppy disk drive, proceed as follows:
1
2
Turn off the computer.
Slide the release lever (1) on the bottom of the computer in the direction of the arrow.
3
4
Slide the drive (2) out of the multi-purpose bay.
Insert the weight saver.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
42
Inserting the floppy disk drive
To insert the floppy disk drive, proceed as follows:
1
2
3
4
Turn off the computer.
If the weight saver is in the multipurpose bay (1), remove the device.
Insert the floppy disk drive (2) into the multipurpose bay with the metallic part up.
Continue pushing the drive into the bay until the release lever locks into place.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
44
Removing a floppy disk
To remove a floppy disk, proceed as follows:
1
2
Wait until the LED indicator (1) turns off.
Press the eject button (2) to remove the floppy disk.
❑ Do not press the eject button when the LED indicator is turned on. Otherwise, data may be lost.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
45
Using PC Cards
This computer has a PC Card slot that supports Type II and Type III PC Cards. PC Cards allow you to connect
portable external devices.
You do not need to shut down your computer when inserting a PC Card.
Inserting a PC Card
To insert a PC Card, proceed as follows:
1
Insert the PC Card into one of the PC Card slots with the label facing upwards.
2
Gently push the PC Card slot into the connector.
The PC Card is automatically detected by your system.
The Safely Remove Hardware icon appears in the system tray.
❑ Some devices may not function properly if you repeat Returning to Normal mode from Standby mode or Hibernate mode.
The computer will return to its original state if you restart it.
The PC Card slots can accommodate two Type II PC Cards (at the same time) or one Type III PC Card. These slots are compatible with Card Bus ports.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
46
Use the lower slot for Type III PC Cards.
Some PC Cards may require you to disable idle devices when using the PC Card.
Make sure you use the most recent software driver provided by the PC Card manufacturer.
If an “!” mark appears in the Device Manager dialog box, remove the software driver and then reinstall it.
You do not need to shut down the computer before inserting or removing a PC Card.
Do not force a PC Card into the slot. It may damage the connector pins. If you have difficulty inserting a PC Card, check that you are inserting the PC
Card in the correct direction. See the manual supplied with your PC Card for more information on use.
For some PC Cards, if you alternate between Normal power operation and Standby or Hibernate power management modes while the card is
inserted, you may find that a device connected to your system is not recognised. Reboot your system to correct the problem.
Do not carry your notebook while touching the head of a PC Card, as pressure or shock may damage the connector pins.
It is recommended that you always use the same slot for a PC Card as switching slots can cause problems with some PC Cards.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
47
Removing a PC Card
Follow the steps below to remove the PC card while your computer is on. If it is not removed correctly, your
system may not work properly. If you want to remove a PC Card when your computer is off, skip steps 1 to 6.
To remove a PC Card, proceed as follows:
1
Double-click the Safely Remove Hardware icon in the taskbar.
The Safely Remove Hardware dialog box appears.
2
3
4
Select the hardware you want to unplug.
Click Stop.
In the Stop a Hardware device dialog box, confirm that the device can be safely removed from the
system.
5
Click OK.
You get a message saying that it is safe to remove the device.
6
7
8
9
Click Close.
Press the PC Card release button so that it pops out.
Push the PC Card release button to eject the card.
Gently grasp the card and pull it out.
10 If the PC Card release button is still out, push it back in to close the front panel cover.
❑ If you unplug the PC Card from the computer when this is still turned on, your system might crash and you might lose data that you did not save before.
Before you remove the PC Card, right-click the PC Card icon in the taskbar and close the card. Close any applications that use the PC Card before
removing the card. Otherwise, data may be lost.
While the card is inserted, your computer may not enter the Hibernate power management mode. It may enter Standby mode. It is recommended
that you remove the card before you manually enter Hibernate mode, or when your computer is set to enter Hibernate automatically while using
a battery as the source of power.
Some PC Cards or their functions may not be compatible with this computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
48
Using the Memory Stick™
Your VAIO computer is designed to support the Memory Stick™. The Memory Stick™ is a compact, portable,
and versatile device especially designed for exchanging and sharing digital data with compatible products.
Because it is removable, it can be used for external data storage.
Use the flash memory technology to download anything that can be converted into digital data, such as
pictures, music, words, sounds, movies and photographs.
Foreseen as the universal data storage device of the future, the Memory Stick™ can already be used with an
ever-increasing range of compatible products, including:
❑ Audio systems
❑ Visual devices
❑ VAIO products
❑ CLIE handhelds
❑ Mobile phones.
There are currently two different types of Memory Stick™:
❑ The generic Memory Stick™, coloured blue.
❑ The MagicGate Memory Stick™, coloured white.
❑ You can purchase Memory Sticks™ from the Sony Style website (http://www.sonystyle-europe.com), or from your local Sony dealer.
Why Memory Stick™?
Sony's vision is to expand the world of communication, promoting the portability of digital data. The
Memory Stick™ is the resulting medium, through which digital devices can be instantly connected. With it,
you can download data from any compatible device, then transfer it to another in a single and instant
transfer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
49
The main advantages of the Memory Stick™ are its:
❑ Compactness: with dimensions of just 21.5 mm (W) x 2.8 mm (H) x 50 mm (D), compatible products can
also be small, lightweight and attractive in their design.
❑ Capacity: Its data capacity far exceeds that of a floppy disk.
❑ Security: its lock option means you can protect your data from accidental erasure.
❑ Versatility: memory capacity ranges from 4MB up to 128MB (the equivalent capacity of 88 floppy disks).
❑ Reliability: by way of protecting the hardware and its contents, the number of terminals is reduced to
only 10 pins. This, and the overall robust structure of the stick, gives it a longer lifespan than other
storage devices.
❑ Durability: the same Memory Stick™ can be used tens of thousands of times.
❑ Forward compatibility: the Memory Stick's™ current format is designed to be compatible with future
products and higher capacity Memory Sticks™.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
50
Generic Memory Stick™
The original Memory Stick™, blue in colour, can be used to record image data taken with digital still
cameras, etc. or data from the PC. With it, you can record, play back and transfer various kinds of data at
any given time.
Because it is easy to remove and transport safely, you can use Memory Stick™ anywhere by inserting it into
any compatible device to transfer and share the information you have saved.
For you, this means you can expand the capabilities of your VAIO computer in the following scenarios:
❑ With your still digital camera, share your holiday pictures instantly by e-mail.
❑ From your handycam to your VAIO, make the most of your captured moments with the VAIO's movie
editing tools.
❑ Carry pictures on you by copying image files from the Internet to your VAIO to your CLIE handheld.
❑ With your voice recorder, add your voice to e-mails so your tone is never misunderstood.
The blue Memory Stick™ is currently available with a 4MB, 8MB, 16MB, 32MB, 64MB or a 128MB memory
(the equivalent capacity of 88 floppy disks).
❑ Generic Memory Sticks™ cannot be used with the Memory Stick™ Walkman, or with data that is protected by copyright.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
51
MagicGate Memory Stick™
The MagicGate Memory Stick™, white in colour, records PC and image data just like its blue counterpart;
the difference is it uses the MagicGate copyright protection technology.
With this type of Memory Stick™, also called the MG Memory Stick™, you can enjoy the following features:
❑ 32MB, 64MB and 128MB capacity versions.
❑ Storage of up to 120 minutes of audio data.
❑ Download and save:
❑ digital music
❑ pictures
❑ movies, and more.
❑ Combine data files to add music to your home movies, for example.
❑ Transfer and share data between several digital products.
❑ MagicGate Copyright Protection Technology.
❑ SDMI (Secure Digital Music Initiative) Compliance.
❑ SonicStage software.
So that you further distinguish a MagicGate Memory Stick™ from a generic one, look for:
❑ the
logo printed on it
❑ a protruding dot located on the back.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
52
❑ MagicGate is a copyright protection technology that complies with the standards set by SDMI (Secure Digital Music Initiative, an organization working
to draw up industry standard specifications in order to protect copyrights of digital music).
The
logo indicates the copyright protection system devised by Sony. It is not meant to guarantee compatibility with other media.
MagicGate
MagicGate refers to the copyright protection technology used by the MagicGate Memory Stick™ and other
MagicGate Memory Stick™ compatible devices.
The Memory Stick™ Walkman and MagicGate Memory Stick™ work together to check the data and ensure
it complies with copyright protection.
If no problems are detected, the data is exchanged in encrypted form; if authentication is not passed, data
cannot be exchanged or played back.
SonicStage
SonicStage uses copyright protection technology designed to manage the digital music content downloaded
to the PC from CDs, the Internet and/or other sources.
Software installed on the PC records music content in encrypted form onto the hard disk. As well as allowing
you to enjoy music on the PC, this technology protects against unauthorized distribution on the Internet.
Since it is compatible with MagicGate, you can use SonicStage to transfer music that you have downloaded
onto your PC to your MG Memory Stick™, and playback on other Magic Gate-equipped devices and media.
Copyright protection
People who create artistic works such as music are entitled to a "copyright", meaning that they have
exclusive rights to dictate how their work is used. When they are created, artistic works are automatically
protected by a copyright without having to submit notification or registration, and may not be used without
the permission of the person who created the work.
In the music world, however, illegal acts of distributing music without the permission of the artist,
particularly on the Internet, have recently been on the increase. That is why the Recording Industry
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
53
Association of America (RIAA) took the initiative to organize a forum called Secure Music Digital Initiative
(SDMI) to study technology for protecting copyrights during the electronic distribution of music.
Sony offers the MagicGate Memory Stick™ and Memory Stick™ Walkman with a copyright protection
function that complies with SDMI standards, thereby providing an environment where individuals can
record and enjoy third-party music data without worrying about copyright infringement.
❑ Literary works that are recorded by individuals are permitted for private usage only.
Compatible devices
There are nearly 80 Memory Stick™-enabled products on the market or announced for introduction world-
wide, ranging from camcorders and portable music players to voice recorders and many other electronic
devices.
You can currently use Memory Sticks™ with the following Sony products:
Visual:
❑ Cybershot digital camera
❑ Mavica digital camera
❑ PC, TRV and VX series digital video cameras
❑ LC data projector
Audio:
❑ MS Walkman
❑ MS Hi-fi system
❑ Network Walkmans
❑ Voice recorders
Other:
❑ VAIO notebooks
❑ VAIO desktops
❑ CLIE Handheld Entertainment Organiser
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
55
Inserting a Memory Stick™
To insert a Memory Stick™, proceed as follows:
1
2
3
Once you have stored your data from your digital device, insert the Memory Stick™ (1) into the optional
PC Card adapter (2).
Push the release button.
The release button pops out.
Push the release button once again.
The PC Card comes out.
4
5
6
Pull the PC Card out of the connector.
Insert the PC Card adapter into the connector (3) on your computer (label facing up) and push it gently.
The Memory Stick™ is automatically detected by your system and appears in your My Computer
window as a local drive, under the appropriate letter (depending on the configuration of your
computer).
When your Memory Stick™ is detected, the Safely Remove Hardware icon appears in the taskbar.
!
Hold the Memory Stick™ with the arrow pointing in the correct direction when you insert it into the slot. To avoid damaging the computer or the
Memory Stick™, do not force the Memory Stick™ into the slot if it does not insert smoothly.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
56
Removing a Memory Stick™
To remove a Memory Stick™, proceed as follows:
1
Double-click the Safely Remove Hardware icon in the taskbar.
The Safely Remove Hardware dialog box appears.
2
3
4
Select the hardware device you want to unplug.
Click Stop.
In the Stop a Hardware device dialog box, select the device that can be safely removed from the
system.
5
Click OK.
You get a message saying that it is safe to remove the device.
6
7
8
9
Click Close.
Press the PC Card release button so that it pops out.
Push the PC Card release button to eject the card.
Gently grasp the card and pull it out.
❑ Always remove the Memory Stick™ gently, or it may pop out unexpectedly.
It is recommended that you remove the Memory Stick™ before shutting down the computer.
Write-protecting a Memory Stick™
Memory Sticks™ are designed with an erasure prevention switch
to protect valuable data from accidental erasure or overwriting.
Move the tab to the right or left* to set or release write-protection.
When the erasure prevention switch is off, data can be saved on the
Memory Stick™. When the erasure prevention switch is on, data can
be read from but not saved on the Memory Stick™.
LOCK
LOCK
LOCK
* The 128 MB Memory Stick™ has a vertical lock.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
57
Using the modem
Your notebook is equipped with an internal modem. You need to connect a phone line to take advantage
of online services and the Internet, to register your computer and software online, and to contact VAIO-Link.
To connect a phone line, proceed as follows:
Plug one end of the phone cable (1) into the phone line jack on the computer and plug the other end into
the wall jack (2).
❑ Your computer cannot be connected to a coin-operated telephone, and may not work with multiple phone lines or a private branch exchange (PBX).
If you connect the modem to a parallel connected phone line, the modem or the other connected device may not function properly. Some of these
connections may result in excess electrical current and could cause a malfunction in the internal modem.
Only DTMF (Dual Tone Multi Frequency) signalling (tone dialling) is supported.
Configuring the modem
Before using your modem, you will need to select your current location.
The detailed procedure for selecting the country is explained in Configuring your modem in the software
guide.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
58
Using the correct phone plug
If there are two phone plugs in the box, make sure you use the correct one for the country you are in, as
follows:
UK: The connector can be identified by its cuboid shape and
flat pins.
Netherlands: The connector can be identified by its protruding
pins.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
59
Using power saving modes
When you use a battery as the source of power for your computer, you can take advantage of power
management settings to conserve battery life. In addition to the normal operating mode, which allows you
to turn off specific devices, your computer has two distinct power saving modes: Standby and Hibernate.
When using battery power, you should be aware that the computer automatically enters Hibernate mode
when the remaining battery charge drops below 5 percent, regardless of the power option settings you
select.
❑ If the battery level falls to below 10 percent, you should either attach the AC adapter to recharge the battery or shut down your computer and insert
a fully charged battery.
Using Normal mode
This is the normal state of your computer when it is in use. The green power indicator light is on in this mode.
To save power, you can turn off a specific device such as the LCD or the hard disk.
Using Standby mode
The computer saves the current state of the system in RAM and switches off power to the CPU. The umber
power light flashes in this mode.
To activate Standby mode, proceed as follows:
Press <Fn>+<Esc>, or <Fn>+<F12>.
Alternatively,
Go to Start/Turn Off Computer and press Stand By.
To return to Normal mode, press any key.
❑ When the computer is in Standby mode, you cannot insert a disc.
Standby requires less time than Hibernate.
Standby uses more power than Hibernate.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
60
Using Hibernate mode
The state of the system is saved on the hard disk and power is turned off. The power indicator light is off in
this mode.
To activate Hibernate mode, proceed as follows:
1
2
Go to Start and click Turn Off Computer.
Hold down the <Shift> key and press Hibernate.
To return to Normal mode, press the power button. The computer returns to its previous state.
❑ If you press the power button for longer than 4 seconds, the computer will turn off.
When the computer is in Hibernate mode, you cannot insert a disc.
Hibernate mode requires more time than Standby mode.
Hibernate mode uses less power than Standby mode.
Entering Hibernate mode with the <Fn> key
You can choose to use the shortcuts <Fn>+<Esc>, or <Fn>+<F12> to enter Hibernate mode instead of
Standby mode.
To change the default settings, proceed as follows:
1
2
3
Go to Control Panel > Power Options.
Select the Advanced tab.
Make your settings under Power buttons.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
61
You can add functionality to your computer by connecting or using any of these peripherals.
Turn on the computer only after turning on all peripherals.
❑ Connecting a port replicator (page 62)
❑ Connecting an external display (page 66)
❑ Connecting external speakers (page 71)
❑ Connecting an external microphone (page 72)
❑ Connecting a Universal Serial Bus (USB) mouse (page 73)
❑ Connecting a printer (page 74)
❑ Connecting an i.LINK™ device (page 76)
❑ Connecting to a network (LAN) (page 78)
❑ Hot plug and play devices should be plugged when the computer is switched on.
USB devices are hot plug and play devices. You do not need to shut down your computer prior to connecting these devices unless the manual supplied
with the device states otherwise.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
62
Connecting a port replicator
Your notebook supports the use of an optional port replicator. Attaching a port replicator enables you to
connect additional peripherals to your computer, such as a printer or an external display.
1
2
3
4
serial connector
/
5
6
7
3 USB ports
(page 73)
(page 85)
(page 19)
printer connector
(page 74)
(page 72)
(page 78)
mouse/keyboard connector
DC In connector
monitor (VGA) connector
network connector
(Ethernet)
❑ The port replicator can be powered only with the AC adapter supplied with your notebook. Do not remove the AC adapter from the port replicator;
this may cause data damage or hardware malfunctions.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
63
Attaching your computer to the port replicator
To attach your computer to the port replicator, proceed as follows:
1
2
Turn off the computer and disconnect all peripherals.
On the bottom of the computer, lift the port replicator port cover.
3
Attach the bottom of the computer to the port replicator connector until it clicks.
4
Plug the cable attached to the AC adapter (1) into the DC In (2) connector on the port replicator (3).
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
64
5
Plug the power cord (4) into the AC adapter and an AC outlet.
The power indicator light turns green.
6
Turn on the computer.
❑ When you use the port replicator for the first time, the installation of the network drivers starts automatically.
When attaching your computer to the port replicator, do not attempt to insert or remove the battery pack. Lifting and turning the computer with the
attached port replicator may cause a temporary loss of power.
You do not need to use the floppy disk supplied with your port replicator.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
65
Disconnecting your computer from the port replicator
To disconnect your computer from the port replicator, proceed as follows:
1
2
3
4
Turn off the computer and the connected peripherals.
Pull the levers on each side of the port replicator (1) to disconnect the computer from the port replicator.
Lift the computer away from the port replicator.
Close the port replicator connector cover on the bottom of your computer.
❑ It is extremely important to close the port replicator connector cover after removing your computer from the port replicator. If the cover is left open,
dirt may get inside and damage the computer.
To disconnect your port replicator completely from the mains voltage, unplug the AC adapter.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
66
Connecting an external display
You can connect an external display to your notebook. For example, you can use your computer with the
following devices:
❑ Computer display (monitor);
❑ Multimedia computer display;
❑ TV;
❑ Projector.
❑ Turn off your computer and the peripherals, unplug the AC adapter and the power cord before connecting the external display.
Connect the power cord after connecting all other cables.
Turn on the peripherals, then turn on your computer.
Connected external displays are used as second screens.
®
On Windows systems only, you can also use an external display to set up a virtual desktop.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
67
Connecting a computer display
To connect a computer display, proceed as follows:
1
2
Plug the display cable (1) in the monitor (VGA) connector (2) on the computer.
If necessary, plug one end of the display’s power cord (3) into the display, and the other end into an AC
outlet.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
68
Connecting a multimedia computer display
You can connect the notebook to a multimedia computer display that includes built-in speakers and a
microphone.
To connect a multimedia computer display, proceed as follows:
1
2
3
Plug the display cable (1) into the monitor connector (2) on the computer.
Plug the speaker cable (3) into the headphone connector (4)
on the computer.
on the computer.
Plug the microphone cable (5) into the microphone connector (6)
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
69
Connecting a TV
To connect a TV, proceed as follows:
1
Plug one end of the audio/video cable (1) into the TV Out connector (2) (yellow) and the other end into
the TV.
2
3
4
5
Plug one end of the sound cable (3) into the headphone connector (4) and the other end into the TV.
Plug the power cord of the TV (5) into an AC outlet.
Switch the input channel of the TV to external input.
Set up the TV configuration system.
❑ See the manual supplied with your peripheral for more
information on installation and use.
If the display resolution of your computer is more than 800 x 600
dots, a part of the image cannot be displayed on your TV. The hidden
area on your TV can be seen by moving the cursor on your computer.
If you want to display the full image, change the display resolution
of your computer to 640 x 480 dots.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
70
Connecting a projector
You can use a projector as an external display, such as the Sony LCD Projector.
To connect a projector, proceed as follows:
1
2
3
4
Plug the RGB signal cable (1) into the monitor connector (2) identified by the symbol.
Plug the audio cable (3) (not supplied) into the headphone connector (4) identified by the
Plug the RGB signal cable and the audio cable into the connector of the projector (5).
Connect the power cord (6) of the projector into an AC outlet.
symbol.
❑ You may not be able to display the computer's LCD and the external display together, depending on the types of computer display and projector used.
You can toggle the output between the notebook LCD screen and the external monitor by pressing the <Fn>+<F7> key combination.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
71
Connecting external speakers
You can enhance the sound quality of your computer by connecting external speakers.
To connect external speakers, proceed as follows:
1
2
3
Plug the speaker cable (1) into the headphone connector (2).
Plug the other end of the speaker cable into the external speaker.
Turn down the volume of the speakers before you turn them on.
❑ Make sure your speakers are designed for computer use.
Do not place floppy disks on the speakers; their magnetic field may damage the data on the disks.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
72
Connecting an external microphone
Your VAIO notebook does not contain an internal microphone. If you need to use a sound input device, for
example to chat on the Internet, you need to plug in an external microphone.
To connect an external microphone, proceed as follows:
Plug the microphone cable (1) into the microphone connector (2) identified by the
symbol.
❑ Make sure your microphone is designed for computer use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
73
Connecting a Universal Serial Bus (USB) mouse
You can connect a USB device (e.g. mouse, floppy disk drive, keyboard, printer, …) to your computer.
Before connecting or disconnecting a USB peripheral, you do not need to shut down the computer.
You may need to install software (device drivers) supplied with your USB device before using the USB device.
There are 2 USB ports at the back of your notebook and 3 USB ports at the back of the optional port
replicator.
To connect a USB mouse, proceed as follows:
1
2
Select the USB port (1) of your choice.
Plug the USB mouse cable (2) into the USB connector.
You can use your USB mouse (3).
❑ You do not need to shut down the computer before connecting or disconnecting a USB peripheral.
The USB mouse software driver is preinstalled on your notebook, therefore, you only need to plug the USB mouse into the USB connector and you
can start working.
You may need to install software (device drivers) supplied with your USB device before using the USB device.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
74
Connecting a printer
®
You can connect a Windows -compatible printer to your computer to print documents.
Connecting a printer using the USB connector
®
You can connect a USB printer compatible with your version of Windows to your computer.
To connect a printer using the USB connector, proceed as follows:
1
Plug an optional USB printer cable (1) into the USB connector (2) identified by the symbol on your
computer and printer.
2
Plug the printer (3) power cord into an AC outlet.
❑ Turn off your computer and the printer, unplug the AC adapter and the power cord before connecting the printer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
75
Connecting a printer using the printer connector
To connect a printer using the printer connector, proceed as follows:
1
Plug the printer cable (1) supplied with the printer into the printer connector (2) identified by
the symbol.
Plug the printer power cord (3) into an AC outlet.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
76
Connecting an i.LINK™ device
Your computer includes an i.LINK™ (IEEE1394) connector, which you can use to connect to an i.LINK™ device
such as a digital video camera recorder or to connect two VAIO notebooks in order to copy, delete or edit
files.
The i.LINK™ connector of your notebook does not supply power to external devices generally powered by
i.LINK™ connectors.
The i.LINK™ connector supports transfer rates up to 400 Mbps; however, the actual transfer rate depends
on the transfer rate of the external device.
The i.LINK™ features available may vary depending on the software applications you use. Refer to the
documentation that came with your software for more information.
i.LINK™ cables compatible with your VAIO notebook include cables with the following part numbers:
VMC-IL4415 (a 1.5 meter cable with a 4-pin connector at each end), VMC-IL4408Series (a 0.8 metre cable with
a 4-pin connector at each end).
❑ Connecting two VAIO computers (page 76)
❑ Connecting a digital video camera recorder (page 77)
Connecting two VAIO computers
You can copy, edit or delete files on another VAIO computer to your computer with an optional i.LINK™
®
cable. If the second computer has the operating system Windows XP, you just need the i.LINK™ cable. If
®
the second computer has a different operating system (for example, Windows 2000), you need a software
application such as Smart Connect. You can also print a document on a printer connected to another VAIO
computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
77
Connecting a digital video camera recorder
To connect a digital video camera recorder, proceed as follows:
1
Plug one end of the optional i.LINK™ cable (1) into the i.LINK™ connector (2) of the computer and the
other end into the DV Out connector (3) on the digital video camera recorder.
2
Launch the DVgate application.
❑ On Sony digital video cameras, connectors labeled DV Out, DV In/Out or i.LINK™ are i.LINK™-compatible.
The Sony digital video camera recorder is an example; your digital video camera recorder may need to be connected differently.
If your digital video camera recorder includes a Memory Stick™ slot, you can copy images from it to your computer via a Memory Stick™. To do so,
simply copy images on the Memory Stick™, then insert it into the Memory Stick™ slot of your computer.
You cannot acces the pictures stored on a Memory Stick™ when using an i.LINK™ connection.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
78
Connecting to a network (LAN)
You can connect your computer to 10BASE-T/100BASE-TX-type networks via an Ethernet network cable. For
the detailed settings and devices needed to connect to the network, consult your Network Administrator.
❑ For more information about connecting your notebook to the network, please consult the Hardware troubleshooting section of the VAIO-Link website:
How to troubleshoot network problems
!
Do not plug a phone cable into your computer network jack.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting help
n N
79
Getting help
This section describes how to get help and support from Sony, as well as troubleshooting tips for your
computer.
Sony support options
Sony provides several support options for your computer.
Printed documentation supplied with your notebook
❑ A Getting Started brochure, where you can find a brief description of the items in your box, some
specifications of your notebook, and how to set up your notebook;
❑ A Customer Guide, where you can find all the basic information you need to start using your notebook,
as well as troubleshooting and VAIO-Link information;
❑ Your Sony Guarantee conditions;
❑ A Safety Regulations flyer;
❑ A Modem Regulations flyer.
Online documentation
1
The Hardware Guide:
❑ Using your notebook shows you how to use the standard components of your system. In this part
of the manual you will also find out what you can do with a Memory Stick™.
❑ Connecting Peripheral Devices explains how you can add functionality by connecting various
peripherals.
❑ Getting Help explains the support options available to you, and offers basic troubleshooting tips.
❑ Precautions provides facts and advice about using your notebook.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting help
n N
80
❑ Glossary refers to terms used in this manual.
2
Refer to your Software Guide for information on the bundled software and the Sony applications.
❑ About the Software is a short description of the features of the software pre-installed on your
system.
❑ Using Video software explains how to use Sony video software: DVgate, MovieShaker and Smart
Capture.
❑ Managing audio files with SonicStage explains how to convert your existing MP3, WMA and
WAV format audio files into ATRAC3 format.
❑ Using DigitalPrint explains how you get the most enjoyment out of your photographs taken with
a digital camera.
❑ Installing and updating applications explains how to install, run or uninstall a software
application.
❑ Managing drivers explains how to install, update or uninstall a driver.
❑ Using the Product Recovery CD-ROMs explains how to perform a system and application recovery.
❑ Using partitioned drives tells you what you can do with partitioned drives.
3
4
Refer to the Specifications online document for details on your computer, drivers and accessories.
In the VAIO-Link Customer Service Guide you will find all the VAIO-Link information you need,
including specific contact numbers and addresses for each country.
5
Consult the Online Help files of the software you are using for detailed information on features and
troubleshooting.
®
6
7
Refer to the Microsoft Quick Start manual for more information on Windows .
Go to http://www.club-vaio.sony-europe.com to find online tutorials about your favourite VAIO
software.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting help
n N
81
Other sources of information
❑ The online help files that accompany your pre-installed software contain instructions on using the
❑ VAIO-Link website: if you have any problem with your computer, you can access the VAIO-Link website.
Go to:
http://www.vaio-link.com
❑ VAIO-Link Response Centre: Before contacting VAIO-Link Response Centre, try to solve the problem
by reading the User Guides and help files for the peripherals or software.
❑ You need to plug in the phone line and configure your modem for use before using the communication features described in this manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting help
n N
82
Troubleshooting
❑ About the display (page 85)
❑ About sound (page 89)
❑ About the modem (page 90)
❑ About peripherals (page 91)
❑ About digital video captures and DVgate (page 93)
❑ About power management (page 93)
About the computer and software
My computer does not start
❑ Check that the computer is plugged into a power source and that it is turned on.
❑ Check that the power indicator on the front panel of the computer indicates that the power is on.
❑ Check that the battery packs are inserted properly and that they are charged.
❑ Make sure there is no disk in the floppy disk drive.
❑ Confirm that the power cord and all cables are connected firmly.
❑ If you have plugged the computer into a UPS (Uninterruptible Power Supply), make sure the UPS is
turned on and works.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting help
n N
83
❑ If you are using an external display, check that it is plugged into a power source and turned on. Check
that you have switched to the external display and that the brightness and contrast controls are adjusted
correctly.
❑ Moisture condensation may have occurred. Do not use the computer for at least one hour and then turn
it on.
❑ If the message Press <F1> to resume, <F2> to set up appears at the bottom of the display, you need
to initialize the BIOS.
❑ Take the battery pack off the notebook, unplug the power cord and plug it again, then turn on the
power.
The message Press <F1> to resume, <F2> to setup appears at startup
If the floppy disk drive is empty, proceed as follows to initialize the BIOS:
1
2
3
Turn off the computer.
Remove any peripheral devices connected to the computer.
Turn on the computer and press <F2> when the Sony logo appears.
The BIOS setup menu screen appears.
4
5
6
7
8
9
Set the date (month/day/year).
Press Enter.
Press the arrow keys to select System Time.
Set the time (hour:minute:second).
Press Enter.
Press the arrow keys to select the Exit menu.
10 Press the arrow keys to select Get Default Values and then press <Enter>. The Load default
configuration now? message appears.
11 Make sure that Yes is selected and then press <Enter>.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting help
n N
84
12 Press the arrow keys to select Exit (save changes) and then press <Enter>.
The Save configuration changes and exit now? message appears.
13 Make sure that Yes is selected and then press <Enter>.
My computer does not shut down
It is recommended that you shut down your computer using the Turn Off Computer command on the
®
Windows Start menu. Using other methods, including those listed here, may result in loss of unsaved data.
If the Turn Off command does not work properly, proceed as follows:
1
Turn off the computer by pressing <Ctrl>+<Alt>+<Delete>. If you have not changed the default
settings, the Windows Task Manager dialog box appears.
2
3
Click Shut Down and then Turn Off.
If this does not work, press the power button and hold it for at least four seconds.
This turns off the power.
4
Unplug the computer from the AC adapter and remove the battery pack from your computer.
My computer locks up
❑ If you suspect one application is locking your system, you can try to stop it. To do this, press
<Ctrl>+Alt>+<Delete> once, go to the Applications tab and select the application that is locking your
system, and then click End Task.
❑ If the above method does not work or you do not know which application is locking your system, restart
®
the computer. On the Windows taskbar, click the Start button, click Turn Off Computer, and then
select Restart.
❑ If the above method does not work, press the power button and hold it for at least four seconds. This
turns off the power, risking the loss of unsaved data.
❑ If your computer locks up while playing a CD-ROM or DVD-ROM, stop the CD, and shut down the
computer by pressing <Ctrl>+<Alt>+<Delete>, and then click Turn Off from the Shut Down menu.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting help
n N
85
My software program locks up or crashes
Make sure the software is compatible with your equipment and operating system and/or try re-installing the
software.
If it still does not work, contact the software publisher or designated provider for technical support.
My touchpad interprets a single tap as a double-click
Open the Mouse icon in the Control Panel and change the button assignments in the Mouse Properties
dialog box. One of the buttons is assigned to the double-click action.
My mouse does not work
❑ If you are using an external serial PS/2 mouse, check that the mouse is plugged into the mouse connector
of your optional port replicator.
❑ If you are using a USB mouse, check that the appropriate driver and software are properly installed.
❑ Check that the USB mouse is plugged into the USB connector.
About the display
My LCD does not display anything
❑ Check that the computer is plugged into a power source and that it is turned on.
❑ Check that the power indicator on the front panel of the computer is on.
❑ Check that the battery packs are inserted properly and that they are charged.
❑ Adjust the brightness of the LCD.
❑ The computer may be in LCD (video) standby mode. Press any key to activate the display.
❑ The display mode may be set to external display mode. Press and hold the <Fn> key while pressing <F7>
several times.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting help
n N
86
The screen image on my external display is not centered or sized properly
Use the controls on your external display to adjust the image.
About CDs and floppy disks
My CD-RW/DVD-ROM or DVD-ROM drive tray does not open
❑ Make sure the computer is turned on.
❑ Press the eject button on the drive.
❑ If the eject button does not work, you can open the tray by inserting a sharp, pointed object into the
hole to the right of the eject button, depending on your model.
❑ The application software when burning a CD may be preventing the drive from opening.
I cannot play a CD-ROM
❑ After inserting the CD, wait for a few seconds for the system to detect it before you try to access it.
❑ Make sure the label of the disc is facing up.
❑ If the disc requires software, make sure the software is installed according to the instructions of the
program.
❑ Check the volume of your speakers.
❑ Clean the disc.
❑ Moisture condensation may have occurred. Leave the computer for at least 1 hour while it is turned on.
I cannot play a DVD-ROM
❑ If a region code warning appears when you are using the DVD player, it could be that the DVD-ROM you
are trying to play is incompatible with the DVD-ROM drive on your notebook. The region code is listed
on the packaging of the disc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting help
n N
87
❑ Change the resolution under Control Panel - Display to a lower resolution.
❑ If you see video but cannot hear sound, check all of the following:
❑ Make sure the mute setting is off on your DVD player.
❑ Check the Master Volume settings of the Sounds and Audio Device Properties. If you have
connected speakers externally, check the volume settings of your computer speakers and check the
connections between your speakers and the computer.
❑ In the Device Manager, check that the correct drivers are installed properly. To display the Device
Manager, click Start, then Control Panel. Double-click the System icon. On the Hardware tab,
click the Device Manager button.
❑ A dirty or damaged disc may cause the computer to 'hang' while it tries to read the disc. If necessary,
reboot the computer, remove the disc and then check that it is not dirty or damaged.
❑ Check your PG settings (Parental Guidance) in the DVD software as they might be preventing you from
playing certain DVDs when they are activated.
®
❑ On your computer, the default DVD region code is 2. Do not change this setting using the Region Code Change function in Windows , or using any
other software applications. System malfunctions originating from the user changing the DVD region code are beyond the scope of your warranty and
will result in service charges for repair.
If you do not immediately see the Display icon after clicking Control Panel, click Switch to Classic View on the left.
My floppy disk drive cannot write to a disk
❑ The disk may be write-protected. Disable the write-protect feature or use a floppy disk that is not write-
protected.
❑ Check that the disk is properly inserted into the floppy disk drive.
❑ Your floppy disk may be corrupt. Try to insert another disk.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting help
n N
88
When I double-click an application icon a message such as You must insert the application CD into your
CD-ROM drive appears and the software does not start.
❑ Some titles require specific files that are located on the application CD-ROM. Insert the disc and try
starting the program again.
❑ Make sure you place the disc in the tray with the label side facing up.
Why does my CD-RW drive not record at the highest speed? (PCG-FX702 and PCG-FX705 only)
You must use 8x CD-R or 4x CD-RW media or higher to achieve optimum performance.
If you want to use other media and are having difficulty formatting non-4x CD-RW discs, change the writing
speed from 4x to a lower setting.
To change the writing speed from the default to a lower speed, proceed as follows:
1
2
3
4
5
6
Click Start and then My Computer.
Right-click the Compact Disc icon.
Select Properties.
Select the Recording tab.
From the lower dropdown list, select the 2x write speed.
Click Apply and then OK.
The reading speed of CD-RWs is very slow
Generally, the reading speed of a CD-RW is slower than that of a CD-ROM or CD-R. The reading speed can
also vary depending on the type of format.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting help
n N
89
The disc tray ejects even when it has been locked into place
❑ Ensure that the disc is placed with the label side facing up.
❑ Clean the disc and the CD-ROM drive lens.
❑ The disc may be scratched. Place another disc to see if that is the reason.
❑ There may be condensation in the drive. Remove the disc and leave the drive open for approximately
one hour.
About sound
My speakers are not producing sound
❑ The built-in speakers may be turned off. Press <Fn>+<F3> to turn on the speakers.
❑ The speaker volume may be turned to the minimum. Press <Fn> and then press <F4> repeatedly to
increase the volume.
❑ If your computer is powered by battery, check that the battery is inserted properly and that it is charged.
❑ If you are using an application that has its own volume control, check that the volume is turned up.
®
❑ Check the volume controls in Windows .
❑ If you use external speakers, check that the speakers are properly connected and the volume is turned
up. If the speakers have a mute button, make sure it is off. If batteries power the speakers, check that
the batteries are inserted properly and that they are charged.
❑ If you have connected an audio cable to the headphone connector, disconnect the cable.
My microphone does not work
Check that the external microphone (optional) is plugged into the microphone connector.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting help
n N
90
About the modem
My internal modem does not work
❑ Check that the phone line is plugged into your computer.
❑ Check that the phone line is working. You can check the line by plugging in an ordinary phone and
listening for a dial tone.
❑ Check that the phone number the program is dialing is correct.
❑ In the Phone and Modem Options dialog box (Control Panel / Phone and Modem Options), check
that your modem is listed in the Modems tab, and that the location information is correct on the
Dialing Rules tab.
❑ If you do not see the Phone and Modem Options icon, click Switch to Classic View on the left side.
The modem may not work if you are connected to a PABX.
My modem cannot establish a connection
❑ The modem dialing mode may be incompatible with your telephone line.
❑ The modem may not work properly if you are behind a Private Automatic Branch eXchange (PABX).
❑ Make sure that the modem is the only device connected to your telephone line.
My modem connection is slow
Many factors influence modem connection speed, including telephone line noise or compatibility with
telephone equipment (such as fax machines or other modems). If you think your modem is not connecting
properly to other PC-based modems, fax machines, or your Internet Service Provider, check the following:
❑ Have your phone company check that your phone line is free from any line noise.
❑ If your problem is fax-related, check that there are no problems with the fax machine you are calling and
that it is compatible with fax modems.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting help
n N
91
❑ If you are having a problem connecting with your Internet Service Provider, check that the ISP is not
experiencing technical problems.
❑ If you have a second phone line available, try connecting the modem to that line.
About peripherals
I cannot establish an i.LINK™ connection between two VAIO computers
❑ Disconnect then reconnect the i.LINK™ cable. If you still have no connection after waiting for a while,
restart both computers.
❑ If either computer has just returned from a power saving mode, the connection may be affected. In this
case, make sure you perform a full restart before connecting them.
I cannot use DV devices. The message DV equipment seems to be disconnected or turned off appears
❑ Check that the DV device is turned on and that the cables are properly connected.
❑ If you are using multiple i.LINK™ devices, the combination of the connected devices may cause unstable
operation. In this case, turn off the power of all connected devices and disconnect unused devices. Check
the connection and then turn on the power again.
❑ Use the manual import/export in DVgate Motion if the problems occur with third party cameras.
❑ You are strongly advised to use only Sony i.LINK™ cables, as using other brands may cause problems with
the i.LINK™ devices.
My PC Card is not working
®
❑ Make sure the PC card is compatible with your version of Windows .
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting help
n N
92
I cannot print
❑ Check that the printer cables are correctly connected.
❑ Check that your printer is correctly configured and that you have up-to-date drivers. If needed, contact
your dealer.
❑ The default setting for the printer port mode is correct for most printers. If you cannot print, try
changing the printer port mode.
To change the printer port mode, proceed as follows:
1
2
Restart your computer.
When you see the Sony logo, press <F2>.
You are in the BIOS.
3
4
Go to the Advanced menu.
Use the minus sign on the numeric keyboard to change the printer port mode.
If the printer port mode is set to ECP, change it to Bidirectional (for HP printers). If the printer port is set
to Bidirectional, change it to ECP.
5
Press <F10> and save the new configuration.
Your PC restarts.
❑ Check the cable to see if you do not have missing or bent pins.
❑ Try a printer self test (if available) to see if the printer itself is still functioning properly. For more
information, please consult the manual supplied with your printer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting help
n N
93
About digital video captures and DVgate
While I am recording images to a digital video device using DVgate, my system displays the message
Recording to DV device failed. Check the power and cable connections to the DV device and try the
operation again...
❑ Close all open applications and restart your computer. Frequent recording of images to a digital video
device while using DVgate sometimes causes this error.
❑ Your DV device will need to have DV In/Out in order to be able to transfer your files to the DV device.
About power management
The power management setting is not responding
Your notebook’s operating system may become unstable if a lower power state, such as Hibernate is
initiated, and then changed before the notebook completely enters the lower power state.
To restore the notebook to its normal operating stability, proceed as follows:
1
2
Close all open applications.
Push and hold the power button for four seconds or longer to shut down the notebook.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
n N
94
Precautions
This section describes safety guidelines and precautions to help you protect your computer from potential
damage.
Your notebook and memory modules use high precision components and electronic connectors technology.
To avoid the invalidation of your guarantee by mishandling, it is recommended that:
❑ You contact your dealer to install a new memory module.
❑ You do not install it yourself, if you are not familiar with upgrading memory on a notebook.
❑ You do not touch the connectors or open the memory panel.
Please contact VAIO-Link if you need assistance.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
n N
95
Changing the memory
In the future you may want to change memory modules in order to expand the functionality of your
computer. You can increase the memory by installing optional memory modules.
Be careful when changing memory. Mistakes on installation or removal of the memory module may cause a
malfunction.
For memory upgrades, use only PC133 (CL2) SDRAM SO-DIMM (gold leaf contacts).
Electrostatic discharge can damage electronic components. Before touching a memory expansion board,
ensure the following:
❑ Handle the memory module gently.
❑ The procedures described in this document assume familiarity with the general terminology associated
with personal computers and with the safety practices and regulatory compliance required for using and
modifying electronic equipment.
❑ Disconnect the system from its power source and from any telecommunication links, networks, or
modems before you open the system. Failure to do so may result in personal injury or equipment
damage.
❑ Electrostatic Discharge (ESD) can damage memory modules and other components. Install the memory
Module only at an ESD workstation. If such a station is not available, do not work in a carpeted area, and
do not handle materials that produce or hold static electricity (cellophane wrappers, for example).
Ground yourself by maintaining contact with an unpainted metal portion of the chassis while
performing the procedure.
❑ Do not open the memory module package until you are ready to change the module. The package
protects the module from ESD.
!
Use the special bag delivered with the memory module or wrap the module in aluminium foil to protect it from electrostatic discharge.
❑ Depending on the configuration of your notebook, the number of available slots can vary.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
n N
96
!
Do not place the memory module in places subject to:
- Heat sources such as radiators or air ducts,
- Direct sunlight,
- Excessive dust,
- Mechanical vibration or shock,
- Strong magnets or speakers that are not magnetically shielded,
- Ambient temperature of more than +35°C or less than +5°C,
- High humidity.
Removing a memory module
To remove a memory module, proceed as follows:
1
2
3
4
Shut down your computer.
Disconnect all peripheral devices.
Unplug the computer and remove the battery pack.
Wait until the computer cools down.
❑ Turn your computer upside down.
❑ Open the cover on the bottom by unscrewing the screws (turn counter clockwise).
❑ To remove the memory module, pull the tabs in the direction of
arrows numbered 1.
The memory module is released.
❑ Pull the memory module in the direction of arrow 2.
❑ Close the cover.
❑ Gently tighten the screws.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
n N
97
Installing a memory module
To install a memory module, proceed as follows:
1
Shut down your computer and disconnect all
peripheral devices.
2
Unplug the computer and remove the battery
packs.
3
4
5
Wait until the computer cools down.
Turn your computer upside down.
Open the cover on the bottom by unscrewing the
screw (turn counter clockwise).
6
7
8
9
Remove the memory module from its packaging.
Install the memory module.
Close the computer cover.
Tighten the screws on the bottom of the computer.
10 Turn on the computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
n N
98
Other precautions
On handling the hard disk
The hard disk has a high storage density and reads or writes data in a short time. On the other hand, it may
be easily damaged by mechanical vibration, shock or dust.
Although the hard disk has the safety device in itself to prevent losing data due to mechanical vibration,
shock or dust, you should be careful when handling your computer.
To avoid damaging your hard disk:
❑ Do not give a shock to your computer.
❑ Keep away from magnets.
❑ Do not place your computer in a location subject to mechanical vibration or in unstable situation.
❑ Do not move your computer while the power is on.
❑ Do not turn off the power or restart the computer while reading or writing data.
❑ Do not use your computer in a place subject to extreme change of temperature.
❑ If the hard disk is damaged, the data cannot be restored.
On handling the LCD screen
❑ Do not leave the LCD facing the sun as it can damage the LCD. Be careful when using the computer near
a window.
❑ Do not scratch the LCD or exert pressure on it. This could cause malfunction.
❑ Using the computer in low temperature conditions may produce a residual image on the screen. This is
not a malfunction. When the computer returns to normal temperature, the screen returns to normal.
❑ A residual image may appear on the screen if the same image is displayed for a lengthy period of time.
The residual image disappears in a while. You can use a screensaver to prevent residual images.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
n N
99
❑ The screen becomes warm during operation. This is normal and does not indicate a malfunction.
❑ The LCD is manufactured using high-precision technology. You may, however, see tiny black points and/
or bright points (red, blue, or green) that continuously appear on the LCD. This is a normal result of the
manufacturing process and does not indicate a malfunction.
❑ Avoid rubbing the LCD screen, as this can damage the screen. Use a soft, dry cloth to wipe the LCD screen.
On using power source
❑ Your computer operates on 100V-240V AC 50/60 Hz.
❑ Do not share the AC outlet with other power-consuming equipment, such as a photocopier or shredder.
❑ You can purchase a power strip with a surge protector. This device prevents damage to your computer
caused by sudden power surges such as those that may occur during an electrical storm.
❑ Do not place heavy objects on the power cord.
❑ To disconnect the cord, pull it out by the plug. Never pull the cord itself.
❑ Unplug your computer from the wall outlet, if you will not be using the computer for a long time.
❑ When the AC adapter is not used, unplug it from the AC outlet.
❑ Use only the supplied AC adapter. Do not use any other AC adapter.
On handling your notebook
❑ Clean the cabinet with a soft, dry cloth or a soft cloth lightly moistened with a mild detergent solution.
Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine, as these
may damage the finish of your computer.
❑ Should any solid object or liquid fall into the computer, shut down your computer and then unplug it.
You may want to have the computer checked by qualified personnel before operating it any further.
❑ Do not drop the computer or place heavy objects on top of the computer.
❑ Do not place your computer in a location subject to:
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
n N
100
❑ Heat sources, such as radiators or air ducts,
❑ Direct sunlight,
❑ Excessive dust,
❑ Moisture or rain,
❑ Mechanical vibration or shock,
❑ Strong magnets or speakers that are not magnetically shielded,
❑ Ambient temperature of more than 35ºC or less than 10ºC,
❑ High humidity.
❑ Do not place electronic equipment near your computer. The electromagnetic field of your computer may
cause a malfunction.
❑ Provide adequate air circulation to prevent that internal heat builds up. Do not place your computer on
porous surfaces such as rugs or blankets, or near material such as curtains or draperies that may block its
ventilation slots.
❑ The computer uses high-frequency radio signals and may cause interference to radio or TV reception.
Should this occur, relocate the computer a suitable distance away from the set.
❑ Use only specified peripheral equipment and interface cables; otherwise, problems may result.
❑ Do not use cut or damaged connection cables.
❑ Your computer cannot be connected to a coin-operated telephone, and may not work with a private
branch exchange (PBX).
❑ If the computer is brought directly from a cold location to a warm one, moisture may condense inside
your computer. In this case, allow at least one hour before turning on your computer. If any problem
occurs, unplug your computer and contact VAIO-Link.
❑ Make sure to disconnect the power cord before cleaning the computer.
❑ As you may lose important data once your computer is damaged, you should back up your data regularly.
Restore the original application programs from the Product Recovery CD-ROM.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
n N
101
On handling floppy disks
❑ Do not open the shutter manually or touch the surface of the floppy disk.
❑ Keep floppy disks away from magnets.
❑ Keep floppy disks away from direct sunlight and other heat sources.
On handling CDs
❑ Do not touch the surface of the disc.
❑ Do not drop or bend the disc.
❑ Fingerprints and dust on the surface of a disc may cause read errors. Proper care of the disc is essential
to maintain its reliability. Do not use solvents such as benzine, thinner, commercially available cleaners
or anti-static spray, as they may cause damage to the disc.
❑ For normal cleaning, hold the disc by its edge and use a soft cloth to wipe the surface from the center
out.
❑ If the disc is badly soiled, moisten a soft cloth with water, wring it out well, and use it to wipe the surface
of the disc from the center out. Wipe off any remaining moisture with a dry soft cloth.
On using the battery pack
❑ Never leave the battery pack in temperatures above 60°C, such as in a car parked in the sun or under
direct sunlight.
❑ Battery life is shorter in a cold environment. This is due to decreased battery efficiency at low
temperatures.
❑ Charge the batteries at temperatures between 10°C to 30° C. Lower temperatures require a longer
charging time.
❑ While the battery is in use or being discharged, the battery pack heats up. This is normal and is not cause
for concern.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
n N
102
❑ Keep the battery pack away from all sources of heat.
❑ Keep the battery pack dry.
❑ Do not open or try to disassemble the battery pack.
❑ Do not expose the battery pack to any mechanical shock.
❑ If you are not using the computer for an extended period of time, remove the battery pack from the
computer to prevent damage to the battery.
❑ If, after fully charging the battery pack, the battery power is still low, the battery pack may be reaching
the end of its life and should be replaced.
❑ You do not need to discharge the battery before recharging.
❑ If you have not used the battery pack for a considerable amount of time, recharge the battery.
On using headphones
❑ Road safety – Do not use headphones while driving, cycling, or operating any motorized vehicle. It may
create a traffic hazard and is illegal in some areas. It can also be potentially dangerous to play loud music
while walking, especially at pedestrian crossings.
❑ Preventing hearing damage – Avoid using headphones at high volume. Hearing experts advise
against continuous, loud and extended play. If you experience a ringing in your ears, reduce the volume
or discontinue use.
On handling Memory Stick™ (optional accessory)
❑ Do not touch the connector with your finger or metallic objects.
❑ Use only the label supplied with the Memory Stick™ as a label.
❑ Do not bend, drop, or apply strong shock to the Memory Stick™.
❑ Do not disassemble or modify Memory Sticks™.
❑ Do not let cards get wet.
❑ Do not use or store Memory Sticks™ in a location subject to:
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
n N
104
Glossary
This section refers to terms used in this manual and elsewhere in the VAIO world. These terms and
definitions have been compiled to provide you with a better understanding of your VAIO computer.
Term
Definition
The <F1> key gives you access to the online help of most software.
<F1> key
Ethernet system providing data transfer rates of 10 Mbps (megabits per second) and
100 Mbps. The 100BASE-TX is a very direct derivative of 10BASE-T. Its 100 Mbps speed is
achieved by simply sending the signal 10 times faster.
10BASE-T/100BASE-TX
Short for Advanced Configuration and Power Interface, a power management specification.
ACPI enables the operating system to turn peripherals on and off and to control the amount
of power given to each device attached to the computer. With ACPI, a CD-ROM player can
be turned off by the operating system if it is not in use.
ACPI
A recovery process that enables you to recover any of the applications initially available on
the computer. Performing an application recovery is useful when an individual application
does not run properly or to reinstall a driver when a device does not work properly.
Application recovery
CD-ROM that enables a VAIO computer user to recover all the applications that were
available when the computer was purchased. The CD-ROM is supplied with the computer.
Application recovery CD-ROM
BIOS
An acronym for Basic Input/Output System. The BIOS is a program that enables the computer
to start when you turn it on. It monitors the data stream between the operating system and
the computer’s hardware devices.
CardBus is the commercial name for an advanced PC Card. The CardBus technology allows
computer users to enjoy higher performances as far as data transfer and operating speed are
concerned. See PCMCIA.
CardBus
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
n N
105
Term
Definition
Abbreviation for Compact Disc Read-Only Memory. A high-capacity optical disc, usually
650 MB in size, capable of being read from but not written to.
CD-ROM
Short for Compact Disc-ReWriteable. Compact Disc that can be used to write or rewrite data
to it. A CD-RW can be written to several times, a CD-R can only be written to once.
CD-RW
CPU
The CPU (Central Processing Unit) is the brains of the computer; it processes the instructions
of your system’s programs. The CPU is also known as the processor or microprocessor and can
be found on the motherboard of your computer.
The Direct Current interface to which you connect your computer’s AC adapter.
DC In
An additional device that you can connect to your notebook. The docking station contains
slots for expansion boards , bays for storage devices and ports for additional peripherals
(such as printers or monitors).
Docking station
A driver is software enabling you to use hardware devices. For example, in order for you to
be able to use a printer, you must first install its driver. Many drivers, such as the mouse
driver, come with the operating system.
Driver
Short for Digital Versatile Disc. A type of read-only CD with a minimum capacity of 4.7 GB
(maximum capacity can reach 17 GB). This high storage power makes it the ideal medium for
storing films.
DVD-ROM
Ethernet
Ethernet is the most widely implemented local area network (LAN) technology. The Ethernet
system called 10BASE-T provides data transfer rates of 10 Mbps (megabits per second). A
more recent version of Ethernet, called 100BASE-T, provides data transfer rates of 100 Mbps.
Gigabit Ethernet supports data rates of 1 gigabit (1,000 megabits) per second.
EULA (End-User License Agreement) is the name given to a license governing the software
on your computer. The EULA can be found in the Read this first section at the beginning
of the software guide or directly on the VAIO desktop.
EULA
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
n N
106
Term
Definition
i.LINK™ is Sony’s version of the IEEE 1394 standard for high-speed digital serial interface.
The standard is regarded in the audio/video and IT industries as the most suitable interface
for connecting computers and digital audio/video devices (such as digital cameras etc.).
i.LINK™
An ISP (Internet Service Provider) is a company which provides you with a user name,
password and telephone number in order to connect to the Internet.
ISP
Cache memory is RAM-like memory that enables quick access to data that has already been
read by the computer. L1 and L2 are levels of cache memory in a computer.
L2 cache memory
LAN
A LAN (Local Area Network) is a group of computers connected together within a limited
geographical area. It enables users to share devices (such as printers) and information using
one processor or server.
Short for Liquid Crystal Display. Flat notebook display technology using liquid crystals (and
light polarisation) to provide sharp, flicker-free images on a screen comprised of millions of
tiny cells. Color can be produced by two basic techniques. Passive matrix is the less expensive
of the two technologies. The active matrix technology (or TFT) produces better quality but
is also more expensive.
LCD
Short for Light-Emitting Diode. A semiconductor device that lights up when electricity passes
through it.
LED
A lithium-ion battery uses lithium cobalt oxide and carbon as electrodes and ions move from
one electrode to the other during charge and discharge. Lithium-ion batteries are the first
choice for notebooks because of their light weight, high energy density and because they
have no memory effect. In addition they do not use heavy metals like lead, mercury or
cadmium.
Lithium-ion battery
Short for Messaging Application Program Interface. A Microsoft Windows interface
enabling you to send e-mail messages. It allows e-mail access and distribution among
applications. MAPI-compatible applications include a Send Mail or Send in the File menu of
the application.
MAPI
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
n N
107
Term
Definition
The maximum amount of RAM that your computer can contain. Once this amount is
reached, you can no longer add additional RAM to your computer.
maximum RAM
The motherboard is the main circuit board inside your computer. It holds the CPU, the BIOS,
the memory and so on.
Motherboard
MPEG
MPEG or Moving Pictures Experts Group is a standard for audio-visual compression of video
sequences. MPEG achieves high compression rates by storing only the changes from one
frame to another. The decrease in data is generally imperceptible to the human eye.
MPEG-1 was developed for digital storage of video and audio data on CD-ROM. MPEG-2
achieves better image and audio quality and is more targeted to TV broadcasting and DVD.
The operating system is software that manages all the other programs in a computer. It
defines how the computer reads and writes information to its disks (and other hardware).
Windows 2000, Windows Millennium Edition, Windows XP Professional and Windows XP
Home Edition are examples of operating systems found on VAIOs.
Operating system
A partition is a logical division of a computer’s hard disk. A two-partition hard drive would
typically contain C: and D: drives. Partitioning is particularly useful if you run more than one
operating system or to clearly separate your data files from your installed software.
Partition
PBX
A PBX (Private Branch Exchange) is a private telephone network within an enterprise. Under
this system, the calls between the enterprise members are local and the phone numbers are
made up of 3 or 4 digits. Companies generally choose this phone system for internal
communication because it is less expensive than the regular network. The users can still
share a number of outside lines for making calls external to the PBX.
A PCMCIA card. The term PC Card is more widely used than PCMCIA. See PCMCIA.
PC Card
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
n N
108
Term
Definition
PCMCIA (Personal Computer Memory Card International Association) is the name of the
group that produced the specification for the credit card-sized plug-in boards for laptop
computers. The cards used to be called PCMCIA cards, but as this was rather
unpronounceable, these cards are now termed PC cards. An example of a PC card is a credit
card-sized modem.
PCMCIA
A pixel (Picture Element) is a part of your screen. Your screen is made up of thousands of
pixels, enabling you to see colours and pictures on it. The more pixels, the higher the
resolution and the better the image quality.
Pixel
An additional device that you can connect to your notebook. The port replicator contains
ports that enable you to connect additional peripherals (such as a printer or a monitor) to
your VAIO. A port replicator is similar to a docking station, but does not include additional
slots for adding expansion boards or storage devices.
Port replicator
The processor is the brains of the computer; it processes the instructions of your system’s
programs. The processor is also known as the CPU or microprocessor and can be found on
the motherboard (see this word) of your computer.
Processor
The product recovery CD-ROMs include the application recovery CD-ROM and the system
recovery CD-ROM(s)
Product recovery CD-ROM
A type of mouse or keyboard port.
PS/2
PSTN (Public Switched Telephone Network) refers to the plain old telephone service, the
national telecommunication networks implementing voice transmission by using analog
signals.
PSTN
Short for Random Access Memory, the memory used to run programs and store data in
current use. RAM is the fastest kind of memory to read from and write to. Information stored
in RAM is lost when you turn off the computer. The higher the RAM capacity, the faster your
current data can be processed.
RAM
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
n N
109
Term
Definition
The degree of sharpness and clarity of an image. Resolution is expressed in pixels. Frequent
computer screen resolutions are 640 x 480 pixels (VGA resolution; appropriate for a 14-inch
screen), 800 x 600 (appropriate for a 15-inch screen), 1,024 by 768 (appropriate for a 17-inch
screen), and 1,280 by 1,024. LCD displays usually use a higher resolution than a CRT of the
same size.
Resolution
RGB stands for Red, Green, Blue. A cable that requires separate transmission types for the
three colours on the display.
RGB signal cable
SDRAM
Synchronous DRAM is a kind of dynamic random access memory running at a much higher
clock speed than regular memory.
The amount of RAM that is available on your computer when you purchase it.
Standard RAM
System recovery
A recovery process that enables you to recover the hard disk image initially available on the
computer. Performing a system recovery is useful in the event of a serious system crash or if
you want to modify the size of your partitions.
CD-ROM that is supplied with your computer and that enables a VAIO computer user to
recover the hard disk image that was available when the computer was purchased.
System recovery CD-ROM
TFT
Short for Thin Film Transistor. Top-of-the-range notebook display for excellent picture
quality. The TFT technology offers the sharpest resolution for flat displays; each pixel is
supported by one to four transistors.
A UPS (Uninterruptible Power Supply) is a device including a battery that protects your
computer from data loss in the event of a power failure. The battery takes over as soon as a
power interruption is detected. If you are using the computer when the power failure
occurs, you have time to save all unsaved data and to shut down your computer.
UPS
USB
USB (Universal Serial Bus) is a hardware interface for attaching devices (such as a keyboard,
mouse, joystick, scanner or printer). You can connect up to 127 devices to a USB port. The
USB standard is Hot Plug and Play.
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
n N
110
Term
VAIO
Definition
Short for Video Audio Integrated Operation. Brand name covering Sony's PC products,
peripherals, accessories and software. VAIO-branded items are all designed to make the best
use of Sony's Audio-Video (AV) and Information Technology (IT) skills.
WAN (Wide Area Network) is a computer network connected together and covering a
relatively large geographical area. This is in contrast to LAN, where the network is usually
set up within one building or small geographical area. The largest existing WAN is the
Internet.
WAN
XGA
Short for Extended Graphic Array, a graphics standard. An XGA board can provide up to
1,024 x 768 pixels and supports up to 65 thousand colours.
Download from Www.Somanuals.com. All Manuals Search And Download.
|