Read this first
n N
2
RealPlayer is a trademark or registered trademark of RealNetworks, Inc. in the U.S. and other countries.
PowerPanel is a trademark of Phoenix Technologies Ltd.
Symantec Norton AntiVirus is a trademark of Symantec Corporation.
WinDVD is a trademark of InterVideo, Inc.
All other names of systems, products and services are trademarks of their respective owners. In the manual, the ™ or ® marks are not
specified.
Specifications are subject to change without notice.
All other trademarks are trademarks of their respective owners.
®
ENERGY STAR
®
®
As an ENERGY STAR Partner, Sony has determined that this product meets the ENERGY STAR guidelines for energy efficiency.
®
The International ENERGY STAR Office Equipment Program is an international program that promotes energy saving through the use
of computers and their office equipment. The program backs the development and dissemination of products with functions that
effectively reduce energy consumption. It is an open system in which business proprietors can participate voluntarily. The targeted
products are office equipment such as computers, displays, printers, facsimiles and copiers. Their standards and logos are uniform
among participating nations.
ENERGY STAR is a U.S. registered mark.
Download from Www.Somanuals.com. All Manuals Search And Download.
Read this first
n N
3
Safety information
Owner's record
The serial number and model number are located on the bottom of your Sony notebook. Record the serialnumber in the space provided
here. Refer to the model number and serial number if you call VAIO-Link.
Serial number: ________________________
Model number (model name in brackets): PCG-651M (PCG-R600HMPD) / PCG-652M (PCG-R600HMP)
Warnings
General
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
Opening the unit, for whatever reason, could lead to damages that are not covered by the guarantee.
To avoid electrical shock, do not open the cabinet. Refer servicing to qualified personnel only.
To prevent fire or shock hazard, do not expose your VAIO notebook to rain or moisture.
Avoid using the modem during a severe electrical storm.
Do not use the modem or a telephone to report a gas leak in the vicinity of the leak.
To change the backup battery, please contact your nearest Sony Service Centre.
Before you connect peripherals, turn off the computer and all peripherals.
Connect the power cord only after connecting all cables.
Turn on the computer only after turning off all peripherals.
The magnetic properties of some objects can have serious consequences for your hard disk drive. They
can erase the data on the hard disk drive and cause the computer to malfunction. Do not place your
computer near or on any objects which emit magnetic fields, mainly:
❑
TV sets
❑
Speakers
Download from Www.Somanuals.com. All Manuals Search And Download.
Read this first
n N
4
❑
❑
Magnets
Magnetic bracelets.
Audio/video
Audio and picture distortion may occur if this equipment is positioned in close proximity to any
equipment emitting electromagnetic radiation.
❑
Connectivity
❑
❑
❑
❑
Never install modem or telephone wiring during a severe lightning storm.
Never install telephone jacks in wet locations unless the jack is specifically designed for wet locations.
Be cautious when installing or modifying telephone lines.
Use your notebook only with the supplied AC adapter. To disconnect your notebook completely from
mains voltage, unplug the AC adapter.
❑
❑
Please make sure that the socket outlet is easily accessible.
Never touch uninsulated telephone wire or terminals unless the telephone line has been disconnected
at the network interface.
Optical disc drive
❑
Misuse of optical instruments can cause eye hazard. As the laser beam used in this product is harmful to
eyes, do not attempt any disassembling process. For servicing, refer to qualified personnel only.
❑
There are visible and invisible radiations when the optical disc drive is open: avoid direct exposure to the
laser beam.
Download from Www.Somanuals.com. All Manuals Search And Download.
Read this first
n N
5
Regulatory information
Sony hereby declares that the product is in compliance with the essential requirements and other relevant provisions of European
Directive 1999/5/EC (radio equipment and telecommunications terminal equipment Directive).
This product complies with EN 55022 Class B and EN 55024 for use in following areas: residential, commercial and light-industrial.
This product has been tested and found compliant with the limits set out in the EMC Directive for using connection cables not longer
than 3 metres (9.8 feet).
Before activating the built-in modem, please read the Modem Regulations leaflet.
The optical disc drive is classified as a CLASS 1 LASER PRODUCT and complies with the Laser Product Safety Standard EN 60825-1. Repair
and maintenance only by authorised Sony technicians. Improper repairs and use can create safety hazards.
CLASS 1
LASER PRODUCT
TO EN 60825-1
Depending on the country, usage of the Wireless LAN functionality may be restricted. For country-specific details, please refer to the
Wireless LAN Regulations leaflet. The Wireless LAN PC card which is incorporated into this unit has passed Wi-Fi certification, and
complies with the interoperability specifications established by WECA(Wireless Ethernet Compatibility Alliance).
Download from Www.Somanuals.com. All Manuals Search And Download.
Read this first
n N
6
Disposing of lithium ion batteries
❑
Do not handle damaged or leaking lithium ion batteries. Dispose of promptly and properly.
❑
Danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type
recommended by the manufacturer. Discard used batteries according to the manufacturer’s instructions.
❑
The battery pack used in this device may present a fire or chemical burn hazard if mistreated. Do not
disassemble, heat above 60°C (140°F) or incinerate.
❑
❑
❑
❑
Dispose of used batteries promptly and properly.
Keep away from children.
In some areas the disposal of lithium ion batteries in household or business waste may be prohibited.
Use the public collection system.
Disposing of the internal memory backup battery
❑
Your VAIO notebook is equipped with an internal memory backup battery that should not have to be
replaced during the lifetime of the product. For information on changing this battery, please contact
VAIO-Link.
❑
❑
❑
Danger of explosion if the battery is incorrectly replaced.
Dispose of properly at its end-of-life.
In some areas the disposal of lithium ion and other non-hazardous batteries in household or business
waste may be prohibited.
❑
Please use the public collection system.
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
n N
7
Welcome
audio, video, computing and communications to provide you with state-of-the-art personal computing.
Here are just some of the features your VAIO notebook has to offer:
❑ Exceptional performance - Your PC includes a fast processor and an internal modem.
❑ Portability - The rechargeable battery pack provides hours of use without AC power.
❑ Sony audio and video quality - A high-resolution LCD screen enables you to take advantage of today’s
advanced multimedia applications, games, and entertainment software.
❑ Multimedia features – Enjoy audio and video CDs.
❑ Interconnectivity – Your computer has MagicGate Memory Stick™, Ethernet and i.LINK™
functionalities. Memory Stick™ is Sony’s universal storage medium. i.LINK™ is a bi-directional digital
interface for exchanging data.
❑ Wireless technology – Thanks to the Wireless LAN (IEEE 802.11b) technology, you can communicate
freely, without cables or wires.
❑ Windows® - Your system includes the Microsoft Windows® XP operating system.
❑ Communications - Access popular online services, send and receive e-mails, browse the Internet...
❑ Excellent customer support - If you are experiencing any problems with your computer, please check
the VAIO-Link website for a possible solution:
http://www.vaio-link.com
Before contacting VAIO-Link, you may try to solve the problem by reading this User Guide or the manuals
and help files for the peripherals or software.
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
n N
8
Documentation pack
Your documentation pack contains paper and online user guides on your computer's hard drive and/or on
the application CD-ROM.
Printed documentation
❑
A Getting Started brochure, where you can find a brief description of the items in your box, some
specifications of your notebook, and how to set up your notebook;
❑
A Troubleshooting Guide, where you can find all the basic information you need to start using your
notebook, as well as troubleshooting and VAIO-Link information;
❑
❑
❑
❑
Your Sony Guarantee conditions;
A Safety Regulations leaflet;
A Wireless Lan Regulations leaflet;
A Modem Regulations leaflet.
Online documentation
1
The Hardware Guide:
❑ Using your notebook shows you how to use the standard components of your system. In this part
of the manual you will also find out what you can do with a Memory Stick™ and how to use the
Wireless LAN functions.
❑ Connecting peripheral devices explains how you can add functionality by connecting various
peripherals.
❑ Getting Help explains the support options available to you, and offers basic troubleshooting tips.
❑ Precautions provides facts and advice about using your notebook.
❑ Glossary refers to terms used in this manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
n N
9
2
Refer to your Software Guide for information on the bundled software and the Sony applications.
❑ About the Software on your computer is a short description of the features of the software pre-
installed on your system.
❑ Using Video software explains how to use Sony video software: DVgate, MovieShaker and Smart
Capture.
❑ Managing audio files with SonicStage explains how to convert your existing MP3, WMA and
WAV format audio files into ATRAC3 format.
❑ Using DigitalPrint explains how to get the most enjoyment out of your photographs taken with a
digital camera.
❑ Customizing your computer explains how to set up your system and power management.
application.
❑ Managing drivers explains how to install, update or uninstall a driver.
❑ Using the Product Recovery CD-ROMs explains how to perform a system and application recovery.
❑ Using partitioned drives tells you what you can do with partitioned drives.
3
4
Refer to the Specifications online document for details on your computer, drivers and accessories.
In the VAIO-Link Customer Service Guide you will find all the VAIO-Link information you need,
including specific contact numbers and addresses for each country.
5
Consult the Online Help files of the software you are using for detailed information on features and
troubleshooting.
6
7
Refer to the Microsoft Quick Start manual for more information on Windows®.
Go to http://www.club-vaio.sony-europe.com to find online tutorials about your favourite VAIO
software.
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
n N
10
Your notebook and its accessories
The following hardware items are in the box:
1
2
3
4
5
main unit
6
7
8
9
power cord
rechargeable battery pack
product recovery CD-ROMs
documentation pack
AC adapter
phone plug (country-specific)*
phone cable
docking station (bundled with PCG-R600HMPD only)
✍ * The phone plug and cable are used for connecting the modem. If there is an extra phone plug inside the box, please refer to Using the correct
phone plug (page 50).
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
n N
11
Ergonomic considerations
You will be using your notebook as a portable device in a variety of environments. Whenever possible, you
should attempt to take account of the following ergonomic considerations to both stationary and portable
environments.
❑ Position of your computer – Place the computer directly in front of you (1). Keep your forearms
horizontal (2), with your wrists in a neutral, comfortable position (3) while using the keyboard,
touchpad, or external mouse. Let your upper arms hang naturally at your sides. Have breaks during
sessions with your computer. Excessive use of the computer may strain muscles or tendons.
❑ Furniture and posture – Sit in a chair with good back support. Adjust the level of the chair so your feet
are flat on the floor. A footrest may make you more comfortable. Sit in a relaxed, upright posture and
avoid slouching forward or leaning far backwards.
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome
n N
12
❑ Viewing angle of the computer’s display – Use the display’s tilting feature to find the best position.
You can reduce eye strain and muscle fatigue by adjusting the tilt of the display to the proper position.
Adjust the brightness setting of the display as well.
❑ Lighting – Choose a location where windows and lights do not create glare and reflection on the
display. Use indirect lighting to avoid bright spots on the display. You can also purchase accessories for
your display that help reduce glare. Proper lighting adds to your comfort and work effectiveness.
❑ Placement of an external display – When using an external display, set the display at a comfortable
viewing distance. Make sure the display screen is at eye level or slightly lower when you are sitting in
front of the monitor.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
13
Using your notebook
This section describes how to start using your computer and how to use your computer’s internal and
external devices.
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
Starting your notebook (page 22)
Shutting down your notebook (page 23)
Using the keyboard (page 24)
Using the touchpad (page 30)
Using the Jog Dial™ (page 31)
Using PC Cards (page 38)
Using Memory Stick™ (page 40)
Using the modem (page 49)
Using the modem (page 49)
Using Wireless LAN (WLAN) (page 53)
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
14
Locating controls and connectors
Right
1
2
3
4
5
6
7
USB connector
(page 75)
Headphone connector
Microphone connector
(page 74)
(page 74)
S400 i.LINK™ connector (page 78)
DC Out
/
Monitor connector
(page 69)
(page 83)
4
6
78
1 2
Ethernet network
connector
3
5
8
Phone line jack
(page 49)
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
16
Front
1
2
3
4
5
6
7
8
9
hard disk drive indicator
Num Lock indicator
Caps Lock indicator
Scroll Lock indicator
LCD screen
(page 28)
(page 28)
(page 28)
(page 28)
(page 28)
(page 22)
(page 24)
(page 30)
(page 28)
(page 28)
power switch
keyboard
touchpad
power indicator
10 battery indicator
11 Memory Stick™ indicator (page 28)
12 docking station indicator (page 28)
13 Wireless LAN indicator
14 Wireless LAN switch
15 left/right buttons
16 Jog Dial™
(page 53)
(page 53)
(page 30)
(page 31)
(page 74)
OFF ON
WIRELESS
LAN
17 speakers
✍ There is a ventilation slot located near the power
switch. Do not cover the ventilation slot when your
computer is on.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
18
Connecting a power source
You can use either an AC adapter or a rechargeable battery pack as a power source.
Using the AC adapter
To use the AC adapter, proceed as follows:
1
2
3
Plug the cable attached to the AC adapter (1) into the DC In connector (2) on the computer.
Plug one end of the power cord (3) into the AC adapter.
Plug the other end of the power cord into an AC outlet.
✍ Use your notebook only with the supplied AC adapter.
If the main unit is connected to a docking station, you can only use the DC In connector on the docking station.
To disconnect your notebook completely from mains voltage, unplug the AC adapter.
Make sure that the socket outlet is easily accessible.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
19
Using the battery pack
You can use a battery pack as a source of power.
The battery pack supplied with your computer is not fully charged at the time of purchase.
Inserting the battery pack
To insert the battery, proceed as follows:
1
Move the lock lever (1) on the bottom of the computer to the Unlock position.
2
Align the grooves (2) and tabs on the battery (3) with the tabs and notches on the back of the computer,
and then slide the battery towards the computer until it clicks into place.
3
Slide the lock lever into the Lock position to secure the battery on the computer.
✍ When the computer is directly connected to AC power and has a battery pack inserted in the battery bay, it uses power from the AC outlet.
Make sure the cover is closed before inserting the battery pack.
!
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
20
Charging the battery pack
To charge the battery pack, proceed as follows:
1
2
Connect the AC adapter to the computer.
Insert the battery pack.
The computer automatically charges the battery (the battery indicator light flashes in a double blink
pattern as the battery charges). When the battery is 85% full, the battery indicator light turns off. Allow
around 5.5 hours to fully charge the battery with the system on.
Battery indicator light status
meaning
On
The computer is using battery power.
The battery is running out of power.
The battery is charging.
Single blink
Double blink
Off
The computer is using AC power.
✍ When the battery is running out of power, both the battery and power indicators blink.
Keep the battery pack in the computer while it is directly connected to AC power. The battery pack continues to charge while you are using the
computer.
If the battery level falls below 10%, you should either attach the AC adapter to recharge the battery or shut down your computer and insert a fully
charged battery.
You can extend battery life by changing the power management modes in the PowerPanel utility.
For some software applications and some peripheral devices, your computer may not enter Hibernate mode when battery life is low. To avoid loss
of data when using battery power, you should save your data frequently and manually activate a power management mode, such as Standby or
Hibernate.
The battery pack supplied with your computer is a lithium ion battery and can be recharged any time. Charging a partially discharged battery does
not affect battery life.
The battery indicator light is on while you use the battery pack as a power source. When the battery life is nearly depleted, both the battery and power
indicators start flashing.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
21
Removing the battery pack
To remove the battery pack, proceed as follows:
1
2
3
Turn off the computer and close the cover.
Slide the lock lever (1) to the Unlock position.
Slide the release lever (2) to the Unlock position and slide the battery away from the computer.
✍ You can remove the battery pack without turning off the computer if it is connected to the mains voltage (AC adapter).
Close the cover before you remove the battery pack.
You may lose data if you remove the battery pack while the computer is on and not connected to the AC adapter or if you remove the battery while
the computer is in Standby mode.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
22
Starting your notebook
To start your computer, proceed as follows:
1
Slide the LCD lock lever (1) in the direction of the arrow, and lift the cover.
2
Press the power switch (2) of the computer until the green power indicator (3) light turns on.
3
If necessary, press <Fn>+<F5> to adjust the brightness controls for the LCD display. To increase the
brightness, use the up or right arrow keys. To decrease, use the down or left arrow keys.
✍ If you hold the power switch in the on position for more than four seconds, the computer will turn off.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
23
Shutting down your notebook
It is important that you shut down your computer properly so you do not lose unsaved data.
To shut down your computer, proceed as follows:
1
2
Click the Start button.
Click Turn Off Computer.
The Turn off computer screen appears.
3
Click Turn Off.
Wait for your computer to turn off automatically.
The power indicator turns off.
4
Turn off any peripherals connected to your computer.
✍ Respond to any prompts warning you to save documents or to consider other users.
If you are unable to shut down your computer;
- Close all software in use.
- If applicable, remove the PC Card. To do so, double-click the Safely Remove Hardware icon in the taskbar. Select the hardware you want to
unplug and click Stop.
- Disconnect any USB devices.
Press <Alt>+<F4> and select Turn Off from the screen that appears.
If this does not work, you can press the power button for more than four seconds. This will shut down the computer. This operation may result in loss
of data.
If you are not using the computer for a short period of time, you can save power by using Standby mode. To enter Standby mode, press
<Fn>+<Esc>. Alternatively, go to the Start menu, select Turn Off Computer, and then click Stand By. For more details on power management,
see Using power saving modes (page 51).
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
24
Using the keyboard
Your keyboard is very similar to a desktop computer’s, but the keyboard has additional keys that perform
specific notebook-related tasks.
If you bought your notebook in the UK, your keyboard has the following layout:
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
26
Keys
Descriptions
Escape key (1)
The <Esc> (Escape) key is used to cancel commands.
Function keys (2)
The twelve function keys along the top of the keyboard are used to perform designated
tasks. For example, in many applications, <F1> is the Help key. The task associated with
each function key may vary from one application to the next.
Print Screen key (3)
The <Print Screen> key takes an electronic snapshot of the screen and moves it to the
Windows Clipboard. You can then paste the screenshot into a document and print it.
Correction keys (4)
<Fn> key (5)
The <Insert>, <Back Space> and <Delete> keys enable you to make corrections.
The <Fn> key is used in combination with other keys to execute commands.
These keys enable you to move the cursor on the screen.
Navigation keys (6)
The Application key displays a shortcut menu; pressing this key is equivalent to clicking the
right mouse button.
Application key (7)
Numeric keypad area (8)
Contains the keys found on a typical calculator. Use the numeric keypad area to type
numbers or to perform mathematical calculations such as addition and subtraction. Note
that you must press the <Num Lock> key to activate the numeric keypad. When you do
so, the <Num Lock> indicator illuminates.
Operator keys (9)
Several keys are always used with at least one other key: <Ctrl>, <Alt>, and <Shift>.
When held down with another key, the <Ctrl> (Control) and <Alt> (Alternate) keys offer
another way to execute commands. For example, in many applications, instead of
choosing the Save command from a menu, you can hold down <Ctrl> and press <S>
(referred to as <Ctrl>+<S>). The <Shift> key is used to produce capital letters or special
symbols such as @ and $.
The key with the Windows® logo displays the Windows® Start menu; it is equivalent to
clicking the Start button on the taskbar.
Windows® key (10)
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
27
Combinations and functions with the <Windows> key
Combinations
Functions
Displays Help and Support Center.
+ <F1>
+ <Tab>
+ <E>
Switches the selected button on the taskbar.
Displays My Computer.
Displays the Search Results window to find a file or folder. This is equivalent to selecting Search from
the Start menu.
+ <F>
Displays the Search Results - Computers window where you can locate other computers.
Minimises all displayed windows.
+ <Ctrl> + <F>
+ <M>
Returns all minimised windows to their previous size.
<Shift> +
+ <R>
<Fn> +
+ <M>
Displays the Run window. This is equivalent to selecting Run from the Start menu.
Displays the System Properties window. This is equivalent to double-clicking the System icon in
Control Panel or to right-clicking My Computer (then clicking Properties) from the Start menu.
+ <Insert>
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
28
Indicators
Indicator
Functions
Power on: lights green.
Power
Standby mode: flashes umber.
Hibernate mode: turns off.
Indicates the status of the battery inserted in the computer.
Battery
Turns on when the Memory Stick™ is in use. Turns off when the Memory Stick™ is
no longer in use.
Memory Stick™
Turns on when the docking station is in use. Turns off when the docking station is no
longer in use.
Docking station
Light
On
Off
Data is read from or written to the hard The hard drive is not being accessed.
drive.
Hard disk
Num Lock
Turns on when the number keys in the
numeric keypad are active.
Turns off when the alphanumeric
character keys in the keypad area are
active.
Turns on when the letters appear in
uppercase as you type. The <Shift> key
lowers the case of typed letters when
Caps Lock is on.
Turns off when the letters appear in
lowercase as you type (unless you hold
down the <Shift> key).
Caps Lock
Scroll Lock
Turns on when the screen scrolls
differently (depends on the application, across the display normally.
no effect in many applications).
Turns off when the information moves
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
29
Combinations and functions with the <Fn> key
Combinations/ Feature
Functions
Puts the system into Standby mode, a power management state. To return
<Fn> +
<Fn> +
<Fn> +
(ESC): Standby
the system to the active state, press any key.
Toggles the built-in speaker on and off.
Adjusts the built-in speaker volume.
(F3): speaker switch
(F4): speaker volume
To increase volume, press <Fn>+<F4> and then
or
or
.
.
To decrease volume, press <Fn>+<F4> and then
Adjusts the brightness of the LCD.
<Fn> +
<Fn> +
(F5): brightness control
To increase lightness intensity, press <Fn>+<F5> and then
To decrease light intensity, press <Fn>+<F5> and then or
or
.
.
Toggles between the LCD, external display (connected to the monitor
connector) and both LCD and external display.
/
(F7)*: switch to the
external display
Provides for the lowest level of power consumption. When you execute this
command, the states of the system and of the peripheral devices are written
to the hard disk and the system power is turned off. To return the system to
its original state, use the power switch to turn on the power.
<Fn> +
(F12): Hibernate
* This function can only be used by the first user to log in. It will not work if you have switched to another user account.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
30
Using the touchpad
The keyboard contains a cursor-pointing device, your touchpad. You can point to, select, drag, and scroll
objects on the screen using the built-in touchpad.
Action
point
Description
Slide one finger on the touchpad (1) to place the pointer (4) on an item or object.
Press the left button (2) once.
click
double-click
right-click
Press the left button twice.
Press the right button (3) once. In many applications, this action displays a shortcut
menu.
drag
Slide one finger while pressing the left button.
scroll
Move your finger along the right edge of the touchpad to scroll vertically. Move
your finger along the bottom to scroll horizontally (the scroll function is available
only with applications that support a touchpad scroll feature).
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
31
Using the Jog Dial™
Your computer is equipped with a Jog Dial™ (1) between the right and left touchpad buttons of your
computer. You can turn (2) or / and press (3) the Jog Dial™ to scroll the window, select a software, adjust
the internal speaker volume, etc.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
32
To launch the Jog Dial Navigator software, click Start, All Programs, then Jog Dial Navigator, and
choose the feature you want.
A Jog Dial Navigator folder was created on your notebook. It is located in the Start, All Programs menu
and contains the following items:
Opens the Jog Dial Folder Browser window, where you can rotate the Jog Dial™ and browse all the
folders on your computer and open any drive, folder, application or document.
Folder Browser
Opens the Jog Dial Setting window. See Changing Jog Dial Navigator settings (page 37).
Jog Dial Setting
Select to display a window containing all your open applications. Rotate to the application you want to
switch to and press the Jog Dial™ to select.
Window Switcher
Starting Jog Dial Navigator
To launch Jog Dial Navigator, proceed as follows:
❑
Press the Jog Dial™.
OR
❑
Double-click the Jog Dial Navigator icon
in the taskbar.
The Jog Dial Bar appears at the top of the screen
✍ Right-clicking the Jog Dial Navigator icon in the taskbar will give you additional options.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
33
Using the Jog Dial Bar
The Jog Dial bar is the initial state of Jog Dial Navigator and can be displayed on the desktop at all times.
You can choose to display it on the taskbar or hide it altogether.
1
2
Launcher button
Click this button to display the Jog Dial Launcher and to launch an application.
VAIO Setting
Adjust your the hardware settings, including display mode, brightness, sound and
volume.
3
Mode button
This button displays the current mode for Jog Dial Navigator.
Click it to switch between modes:
- Select SCROLL to enter Scroll mode.
- Select APPS to enter Application mode.
4
5
6
Jog Dial Setting
Help
Edit the general Jog Dial™ settings with Jog Dial Navigator.
Help topics about Jog Dial Navigator.
Close button
Click this button to close the Jog Dial Bar.
To show it again, double-click the Jog Dial Navigator icon in the taskbar, or right-click
the Jog Dial Navigator icon in the taskbar and select Display Jog Dial Bar.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
34
Switching modes
When you are working in an application supporting the Jog Dial Navigator functions, you can use either
Scroll mode or Application mode. By switching modes, you change the functions that can be performed
using the Jog Dial™.
✍ Functions that can be used with the Jog Dial™ depend on the software you are using.
You can use the Scroll mode to scroll in the current software. You can also scroll in the Start menu.
To switch from Application mode to Scroll mode, proceed as follows:
❑
Select SCROLL in the Jog Dial Bar.
OR
❑
with the Jog Dial™, select
from the menu displayed in the Jog Dial Navigator window.
✍ Even with software applications that do not support other Jog Dial Navigator functions, you can still scroll.
To switch from Scroll mode to Application mode, proceed as follows:
❑
Press the Jog Dial™.
OR
❑
Click APPS in the Jog Dial Bar.
The Application mode is used for operations other than scrolling.
Depending on the application you are working in, the Jog Dial
Navigator window will contain a list of items, such as menus, options
and file names, which you can select with the Jog Dial™, or generic
instructions about how to use the Jog Dial™.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
35
Using the Jog Dial Launcher
To start the Jog Dial Launcher, proceed as follows:
❑
In the Jog Dial Bar, click the arrow icon
on the left.
OR
❑
Hold down the <Ctrl> key and press the Jog Dial™.
The Jog Dial Launcher bar appears.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
36
Rotate the Jog Dial™ wheel up and down to
view the software applications and utilities on
your computer. To launch an application,
make sure it is selected and press the Jog
Dial™.
With some folders you will then get to a
submenu. Again, rotatethe Jog Dial™to select
a feature, then press to launch it.
Press the Back button next to the Jog Dial™ to
go back to the main Jog Dial Launcher bar,
or to close the Jog Dial Launcher if you are
already in the main bar.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
37
Changing Jog Dial Navigator settings
You can change the operation and display of the Jog Dial Navigator with the options in Jog Dial Setting.
To display the Jog Dial Setting dialog box, proceed as follows:
❑
Click the Jog Dial Setting icon
in the Jog Dial Bar.
OR
❑
Right-click the Jog Dial Navigator icon
in the taskbar, and select Jog Dial Setting from the menu.
OR
❑
Double-click Jog Dial Navigator in the Control Panel (Classic View).
OR
❑
Click Start, All Programs, Jog Dial Navigator then Jog Dial Setting.
The Jog Dial Setting window appears.
Activity mode settings are enabled after you reboot your computer.
Activity mode tab
Activity setting tab
Using both Scroll and Application Modes: This is the normal activity mode setting for Jog Dial Navigator.
Using Jog Dial as a mouse wheel: If this is selected, the Jog Dial™ functions as a mouse wheel only.
Disable all the Jog Dial functions: If this is selected, all the Jog Dial™ functions are disabled.
This sets the Jog Dial Navigator functions.
Scrolling Speed: Drag the slider left or right to select the desired Jog Dial™ scrolling speed.
Control Menu Box: Check this box if you want to be able to control pop-up menus with Jog Dial™.
Control Dialog Box: Check this box if you want to be able to control dialog boxes with Jog Dial™.
Select JogScript file: This specifies the location and name of JogScript files.
This sets the sound effects for the Jog Dial™ window display and Jog Dial™ functions.
Display/Sound tab
Enable animation: This enables or disables the animation effects during Jog Dial™ window display.
Enable sound when pressing Jog Dial: Check this box if you want to hear a sound when pressing the Jog
Dial™. Enter the path and file name of the sound in the text box underneath.
Enable sound when spinning JogDial: Check this box to hear a sound when Jog Dial™ is spun. Enter the
path and file name of the sound in the text box underneath.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
38
Using PC Cards
Your computer includes a PC Card slot. PC Cards allow you to connect portable external devices.
Inserting a PC Card
To insert a PC Card, proceed as follows:
1
Insert the PC Card into the PC Card slot, front label facing up.
2
Gently push the card into the slot until the card is fixed into the connector.
✍ Some PC Cards may require you to disable idle devices when using the PC Card. You can use Sony Notebook Setup to disable devices.
Be sure to use the most recent software driver provided by the PC Card manufacturer.
If an “!” mark appears on the Device Manager tab in the System Properties dialog box, remove the software driver and then reinstall it.
You do not need to shut down the computer before inserting or removing a PC Card.
Do not force a PC Card into the slot. It may damage the connector pins. If you have difficulty inserting a PC Card, check that you are inserting the PC
Card in the correct direction. See the manual supplied with your PC Card for more information on use.
For some PC Cards, if you alternate between Normal power operation and Standby or Hibernate power management modes while the card is
inserted, you may find that a device connected to your system is not recognised. Reboot your system to correct the problem.
The computer will return to its original state if you restart it.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
39
Removing a PC Card
Follow the steps below to remove the PC Card while your computer is on. If it is not removed properly, your
system may not work properly. If you want to remove a PC Card when your computer is off, skip steps 1 to 7.
To remove a PC Card, proceed as follows:
1
Double-click the Safely Remove Hardware icon in the system tray.
The Safely Remove Hardware dialog box appears.
2
3
4
Select the hardware you want to unplug.
Click Stop.
In the Stop a Hardware Device dialog box, confirm that the device can be safely removed from the
system.
5
Click OK.
A dialog box appears, explaining that it is safe to remove the device.
6
7
8
9
Click OK.
Click Close.
Eject the PC Card release button (1) and then press it to eject the card.
Gently press the card and pull it out.
✍ If you unplug the PC Card from the computer when it is still turned on, your system might crash and you might lose data that you did not save before.
Whilethecard is inserted, your computer maynot enter the Hibernate power management modeeven when battery life is low. It may enter Standby
mode. It is recommended that you remove the card before your computer enters Hibernate mode by pressing the <Fn>+<F12> keys or by using
the PowerPanel Utility, and when it is set to enter Hibernate automatically while using a battery as the source of power.
Some PC Cards or their functions may not be compatible with this computer.
!
!
Do not select and stop a USB disc drive, a Sony i.LINK™ CD-RW/DVD-ROM drive or a Sony i.LINK™ DVD-ROM drive.
If you stopped a Sony i.LINK™ CD-RW/DVD-ROM drive or a Sony i.LINK™ DVD-ROM drive by mistake, disconnect the docking station and connect
it again.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
40
Using Memory Stick™
Your VAIO computer is designed to support the Memory Stick™. The Memory Stick™ is a compact, portable,
and versatile device especially designed for exchanging and sharing digital data with compatible products.
Because it is removable, it can be used for external data storage.
Use the flash memory technology to download anything that can be converted into digital data, such as
pictures, music, words, sounds, movies and photographs.
Foreseen as the universal data storage device of the future, the Memory Stick™ can already be used with an
ever-increasing range of compatible products, including:
❑
❑
❑
❑
❑
Audio systems
Visual devices
VAIO products
CLIE handhelds
Mobile phones.
There are currently two different types of Memory Stick™:
❑
❑
The generic Memory Stick™, coloured blue.
The MagicGate Memory Stick™, coloured white.
✍ You can purchase Memory Sticks™ from the Sony Style website (http://www.sonystyle-europe.com), or from your local Sony dealer.
Why Memory Stick™?
Sony's vision is to expand the world of communication, promoting the portability of digital data. The
Memory Stick™ is the resulting medium, through which digital devices can be instantly connected. With it,
you can download data from any compatible device, then transfer it to another in a single and instant
transfer.
The main advantages of the Memory Stick™ are its:
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
41
❑ Compactness: with dimensions of just 21.5 mm (W) x 2.8 mm (H) x 50 mm (D), compatible products can
also be small, lightweight and attractive in their design.
❑ Capacity: Its data capacity far exceeds that of a floppy disk.
❑ Security: its lock option means you can protect your data from accidental erasure.
❑ Versatility: memory capacity ranges from 4MB up to 128MB (the equivalent capacity of 88 floppy disks).
❑ Reliability: by way of protecting the hardware and its contents, the number of terminals is reduced to
only 10 pins. This, and the overall robust structure of the stick, gives it a longer lifespan than other
storage devices.
❑ Durability: the same Memory Stick™ can be used tens of thousands of times.
❑ Forward compatibility: the Memory Stick's™ current format is designed to be compatible with future
products and higher capacity Memory Sticks™.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
42
Generic Memory Stick™
The original Memory Stick™, blue in colour, can be used to record image data taken with digital still
cameras, etc. or data from the PC. With it, you can record, play back and transfer various kinds of data at
any given time.
Because it is easy to remove and transport safely, you can use Memory Stick™ anywhere by inserting it into
any compatible device to transfer and share the information you have saved.
For you, this means you can expand the capabilities of your VAIO computer in the following scenarios:
❑
❑
With your still digital camera, share your holiday pictures instantly by e-mail.
From your handycam to your VAIO, make the most of your captured moments with the VAIO's movie
editing tools.
❑
❑
Carry pictures on you by copying image files from the Internet to your VAIO to your CLIE handheld.
With your voice recorder, add your voice to e-mails so your tone is never misunderstood.
The blue Memory Stick™ is currently available with a 4MB, 8MB, 16MB, 32MB, 64MB or a 128MB memory
(the equivalent capacity of 88 floppy disks).
✍ Generic Memory Sticks™ cannot be used with the Memory Stick™ Walkman, or with data that is protected by copyright.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
43
MagicGate Memory Stick™
The MagicGate Memory Stick™, white in colour, records PC and image data just like its blue counterpart;
the difference is it uses the MagicGate copyright protection technology.
With this type of Memory Stick™, also called the MG Memory Stick™, you can enjoy the following features:
❑
❑
❑
32MB, 64MB and 128MB capacity versions.
Storage of up to 120 minutes of audio data.
Download and save:
❑
❑
❑
digital music
pictures
movies, and more.
❑
❑
❑
❑
❑
Combine data files to add music to your home movies, for example.
Transfer and share data between several digital products.
MagicGate Copyright Protection Technology.
SDMI (Secure Digital Music Initiative) Compliance.
SonicStage software.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
44
So that you further distinguish a MagicGate Memory Stick™ from a generic one, look for:
❑
❑
the
logo printed on it
a protruding dot located on the back.
✍ MagicGate is a copyright protection technology that complies with the standards set by SDMI (Secure Digital Music Initiative, an organization working
to draw up industry standard specifications in order to protect copyrights of digital music).
The
logo indicates the copyright protection system devised by Sony. It is not meant to guarantee compatibility with other media.
MagicGate
MagicGate refers to the copyright protection technology used by the MagicGate Memory Stick™ and other
MagicGate Memory Stick™ compatible devices.
The Memory Stick™ Walkman and MagicGate Memory Stick™ work together to check the data and ensure
it complies with copyright protection.
If no problems are detected, the data is exchanged in encrypted form; if authentication is not passed, data
cannot be exchanged or played back.
SonicStage
SonicStage uses copyright protection technology designed to manage the digital music content downloaded
to the PC from CDs, the Internet and/or other sources.
Software installed on the PC records music content in encrypted form onto the hard disk. As well as allowing
you to enjoy music on the PC, this technology protects against unauthorised distribution on the Internet.
Since it is compatible with MagicGate, you can use SonicStage to transfer music that you have downloaded
onto your PC to your MG Memory Stick™, and playback on other MagicGate-equipped devices and media.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
45
Copyright protection
People who create artistic works such as music are entitled to a "copyright", meaning that they have
exclusive rights to dictate how their work is used. When they are created, artistic works are automatically
protected by a copyright without having to submit notification or registration, and may not be used without
the permission of the person who created the work.
In the music world, however, illegal acts of distributing music without the permission of the artist,
particularly on the Internet, have recently been on the increase. That is why the Recording Industry
Association of America (RIAA) took the initiative to organise a forum called Secure Music Digital Initiative
(SDMI) to study technology for protecting copyrights during the electronic distribution of music.
Sony offers the MagicGate Memory Stick™ and Memory Stick™ Walkman with a copyright protection
function that complies with SDMI standards, thereby providing an environment where individuals can
record and enjoy third-party music data without worrying about copyright infringement.
✍ Literary works that are recorded by individuals are permitted for private usage only.
Compatible devices
There are nearly 80 Memory Stick™-enabled products on the market or announced for introduction world-
wide, ranging from camcorders and portable music players to voice recorders and many other electronic
devices.
You can currently use Memory Sticks™ with the following Sony products:
Visual:
❑
❑
❑
❑
Cybershot digital camera
Mavica digital camera
PC, TRV and VX series digital video cameras
LC data projector
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
46
Audio:
❑
❑
❑
❑
MS Walkman
MS Hi-fi system
Network Walkmans
Voice recorders
Other:
❑
❑
❑
❑
❑
❑
VAIO notebooks
VAIO desktops
CLIE Handheld Entertainment Organiser
Sony mobile phones
Digital printers
AIBO the Sony Entertainment Robot
To find out more about the products available in your country, go to:
http://www.sonystyle-europe.com
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
47
Inserting a Memory Stick™
To insert a Memory Stick™, proceed as follows:
1
2
facing up and toward the Memory Stick™ slot.
Carefully slide the Memory Stick™ into the slot until it clicks in place.
The Memory Stick™ is automatically detected by your system and appears in your My Computer
window as a local drive, under the appropriate letter (depending on the configuration of your
computer).
✍ Hold the Memory Stick™ with the arrow pointing in the correct direction when you insert it into the slot. To avoid damaging the computer or the
Memory Stick™, do not force the Memory Stick™ into the slot if it does not insert smoothly.
Removing a Memory Stick™
To remove a Memory Stick™ using the Memory Stick™ slot, proceed as follows:
1
2
Check that the access light is off.
Push the Memory Stick™ in toward the notebook.
The Memory Stick™ ejects.
3
Pull the Memory Stick™ out of the slot.
✍ Always remove the Memory Stick™ gently, or it may pop out unexpectedly.
It is recommended to remove the Memory Stick™ before shutting down the computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
48
Write-protecting a Memory Stick™
Memory Sticks™ are designed with an erasure prevention switch to protect valuable data from accidental
erasure or overwriting.
Move the tab to the right or left* to set or release write-protection. When the erasure prevention switch is
off, data can be saved on the Memory Stick™. When the erasure prevention switch is on, data can be read
from but not saved on the Memory Stick™.
LOCK
LOCK
LOCK
* The 128 MB Memory Stick™ has a vertical lock.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
49
Using the modem
Your notebook is equipped with an internal modem.
You need to connect to a phone line to take advantage of online services and the Internet, but also to
register your computer and software online, and to contact VAIO-Link.
To connect a phone line, proceed as follows:
1
2
Plug one end of the phone cable (1) into the phone line jack on the computer.
Plug the other end into the wall jack (2).
✍ Do not pull the flexible cover too forcefully.
A country-specific phone plug is supplied with your VAIO notebook, allowing you to plug the phone line into the wall jack.
We recommend you to use the supplied plug, because the usage of any other phone plug can decrease the connection quality.
Your computer cannot be connected to a coin-operated telephone, and may not work with multiple phone lines or a private branch exchange (PBX).
If you connect the modem to a parallel connected phone line, the modem or the other connected device may not function properly. Some of these
connections may result in excess electrical current and could cause a malfunction in the internal modem.
Only DTMF (Dual Tone Multi Frequency) signalling (tone dialling) is supported.
Before using your modem, you will need to select your current location. The detailed procedure for selecting the country is explained in Configuring
your modem in the software guide.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
50
Using the correct phone plug
If there are two phone plugs in the box, make sure you use the correct one for the country you are in, as
follows:
UK: The connector can be identified by its cuboid shape and
flat pins.
Netherlands: The connector can be identified by its protruding
pins.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
51
Using power saving modes
When you use a battery as the source of power for your computer, you can take advantage of power
management settings to conserve battery life. In addition to the normal operating mode, which allows you
to turn off specific devices, your computer has two distinct power saving modes: Standby and Hibernate.
When using battery power, you should be aware that the computer automatically enters Hibernate mode
when the remaining battery charge drops below 7 percent, regardless of the power management setting
you select.
✍ If the battery level falls below 10 percent, you should either attach the AC adapter to recharge the battery or shut down your computer and insert a
fully charged battery.
Using Normal mode
This is the normal state of your computer when it is in use. The green power indicator light is on in this mode.
To save power, you can turn off a specific device such as the LCD or the hard disk.
Using Standby mode
The computer saves the current state of the system in RAM and switches off power to the CPU. The umber
power light flashes in this mode.
To activate Standby mode, proceed as follows:
Press the <Fn> and <Esc> keys simultaneously.
Alternatively,
1
2
Click Start and then Turn Off Computer.
In the Turn off computer screen, press Standby.
The computer enters Standby mode.
To return to Normal mode, proceed as follows:
Press any key.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
52
Using Hibernate mode
The state of the system is saved on the hard disk and power is turned off. The power indicator light is off in
this mode.
To activate Hibernate mode, proceed as follows:
Press <Fn>+<F12>.
The Hibernating screen appears and the notebooks enters Hibernate mode.
Alternatively,
Click Start, and then Turn Off Computer.
In the Turn off computer screen, hold down the <Shift>-key and press Hibernate.
To return to Normal mode, proceed as follows:
Turn on the computer by pressing the power button.
The computer returns to its previous state.
✍ When the computer is in Hibernate mode, you cannot insert a disc.
Hibernate mode requires more time than Standby mode to be activated.
It takes more time to return to normal mode from Hibernate mode than from Standby mode.
Hibernate mode uses less power than Standby mode.
Do not move the notebook until its power indicator turns off.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
53
Using Wireless LAN (WLAN)
Thanks to Sony’s Wireless LAN (WLAN), all your digital devices with built-in WLAN functionality
communicate freely with each other through a powerful network. A WLAN is a network in which a mobile
user can connect to a local area network (LAN) through a wireless (radio) connection. So there is no need
anymore to pull cables or wires through walls and ceilings.
The Sony WLAN supports all normal Ethernet activities, but with the added benefits of mobility and
roaming. You can still access information, internet/intranet and network resources, even in the middle of a
meeting, or as you move from one place to another.
You can communicate without an Access Point, this means that you can communicate between a limited
number of computers (ad-hoc), or you can communicate through an Access Point, which allows you to
create a full infrastructure network (infrastructure).
✍ In some countries, using WLAN products may be restricted by the local regulations (e.g. individual licence, limited number of channels). Therefore,
before activating the WLAN functionality, read the Wireless LAN Regulation leaflet carefully.
WLAN uses the IEEE 802.11b standard, which specifies the used technology. The standard includes the encryption method: Wired Equivalent
Privacy (WEP), which is a security protocol. Data encryption protects the vulnerable wireless link between clients and Access Points. Besides that,
there are other typical LAN security mechanisms to ensure privacy, such as: password protection, end-to-end encryption, virtual private networks, and
authentication.
Wireless LAN devices using the IEEE 802.11a standard and the ones using the IEEE 802.11b standard cannot communicate because the frequencies
are different.
The standard access is 11 Mbps, or about 30 to 100 times faster than a standard dial up.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
54
Communicating without Access Point (ad-hoc)
An ad-hoc network is a network in which a local network is created only by the wireless devices themselves,
with no other central controller or Access Point. Each device communicates directly with other devices in the
network. You can set up an ad-hoc network easily at home.
To communicate without Access Point (ad-hoc), proceed as follows:
1
2
Turn on the Wireless LAN switch on the front side of the computer.
Double-click the network icon
in the taskbar displaying Wireless Network Connection.
The Connect to Wireless Network dialog box appears.
3
Click the Advanced button.
The Wireless Network Connection Properties dialog box appears.
4
5
Select the Wireless Networks tab.
Click the Add… button.
The Wireless Network Properties dialog box appears.
6
Enter a Network name (SSID)*.
You can choose a 6-digit name.
7
8
9
Select the Data encryption (WEP enabled) check box.
Select the Network Authentication (Shared mode) check box.
Clear the The key is provided for me automatically check box.
Some information becomes visible.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
55
10 Fill in the Network key*.
The network key should be 5 digits. You can choose whatever you want.
11 Click OK.
Your Network name (SSID) appears in the Preferred networks box.
12 Click Advanced.
The Advanced dialog box appears.
13 Select the Computer-to-computer (ad hoc) networks only check box.
14 Click Close.
15 Click OK.
Your computer is ready to communicate with another computer.
* If you want to communicate between two or more computers, you need to configure all these computers in exactly the same way.
This means that you need to enter the same Network name (SSID) and the same Network key on all computers as on the first
computer you configure.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
56
✍ In France and in the Netherlands, only a few channels can be used:
- France: only channels 10, 11 (indoor as well as outdoor).
- Netherlands: channels 9, 10, 11 (only outdoor). Indoor all channels can be used.
This means that you need to change channels if you are in one of these countries.
For more information on changing channels, see Selecting a channel (page 58).
Communicating with an Access Point (infrastructure)
An infrastructure network is a network that extends an existing wired local network to wireless devices by
providing an Access Point, for example the Sony PCWA-A200 Access Point. The Access Point bridges the
wireless and wired LAN and acts as a central controller for the Wireless LAN. The Access Point coordinates
transmission and reception from multiple wireless devices within a specific range.
To communicate with an Access Point (infrastructure), proceed as follows:
1
2
3
Turn on the Wireless switch on the front side of the computer.
Right-click the network icon
in the taskbar displaying the Wireless Network Connection message.
Click View Available Wireless Networks.
The Connect to Wireless Network dialog box appears.
4
Select the network you want to use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
57
5
Type the Network Key.
If you are using the Sony Access Point PCWA-A200, by default, the network key has the same name as
the network ID, but without the first digit.
For example:
- ID of the network: 09316a (6 digits)
- Network key: 9316a (5 digits)
6
Click Connect.
After 30 seconds, the connection is established.
✍ In France and in the Netherlands, only a few channels can be used:
- France: only channels 10, 11 (indoor as well as outdoor).
- the Netherlands: channels 9, 10, 11 (only outdoor). Indoor all channels can be used.
This means that you need to change channels if you are in one of these countries.
For more information on changing channels, see Selecting a channel (page 58).
Download from Www.Somanuals.com. All Manuals Search And Download.
Using your notebook
n N
58
Selecting a channel
When using Wireless LAN, radio frequencies are used to transmit data from one computer to another. Radio
frequencies are divided into several channels (1 to 14). But in France, you have to use channels 10 or 11
(indoor and outdoor). In the Netherlands, you have to use channels 9, 10 or 11 (outdoor).
You need to change the channels in case of an ad-hoc and an infrastructure network.
To change channels, proceed as follows:
1
2
Click Start and then Control Panel.
Double-click System.
The System Properties dialog box appears.
3
4
5
6
7
On the Hardware tab, click Device Manager.
The Device Manager window appears.
Double-click Network adapters.
The list of available network adapters appears.
Right-click LAN-Express IEEE 802.11 PCI Adapter and select Properties.
The LAN-Express IEEE 802.11 PCI Adapter Properties dialog box appears.
On the Advanced tab, select Channel.
Use default channel appears in the Value screen.
Set the Value to the correct channel.
- France: only 10 or 11 (whether used indoor and outdoor).
- the Netherlands: 9, 10, 11 (when used outdoor).
8
Click OK.
The correct channel has been set.
✍ When you change the channel number on one computer, you need to change the channel number manually on all other devices intended for wireless
connection.
If you use a non-Sony Access Point, read the manual of the Access Point to be sure which channel to use.
For more information on Wireless LAN, read the Wireless LAN Regulations leaflet.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
59
❑
❑
❑
❑
❑
❑
❑
❑
Connecting a docking station (page 60)
Connecting an external display (page 69)
Connecting external speakers (page 74)
Connecting an external microphone (page 74)
Connecting a Universal Serial Bus (USB) mouse (page 75)
Connecting a printer (page 76)
Connecting an i.LINK™ device (page 78)
Connecting to a network (LAN) (page 83)
✍ Hot plug and play devices should be plugged when the computer is switched on.
USB devices are hot plug and play devices. You do not need to shutdown your computer prior to connecting these devices unless the manual supplied
with the device states differently.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
60
Connecting a docking station
You can use the PCGA-DSM51* CD-RW/DVD docking station to connect peripheral devices such as a printer
or an external display or to use diskettes.
Different ports are available when the main unit is docked and not docked.
* Bundled with PCG-R600HMPD only.
Locating the docking station controls and connectors
Right & Front
1
2
3
4
Docking connector
(page 60)
CD-RW/DVD-ROM drive (page 65)
UNDOCK switch
Release lever
(page 64)
(page 64)
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
62
Back
1
2
3
4
DC In
(page 18)
(page 83)
(page 75)
(page 78)
5
6
7
Monitor connector
Printer connector
Serial port
(page 69)
(page 76)
/
Ethernet network connector
2 USB connectors
S400 i.LINK™ connector
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
63
Attaching your computer to the docking station
To connect your computer to the docking station, proceed as follows:
1
Plug the AC adapter cable into the DC In connector on the docking station and the other end to an AC
outlet.
The DC In LED turns on.
2
3
4
Close the cover of your computer.
Grab the sides of the notebook at both ends.
Insert the front of the notebook into the docking station tabs (1).
5
Press the bottom of the notebook on the docking station until you hear two clicks.
The docking station is now connected to the computer.
✍ You cannot connect the docking station when the notebook is in a power saving mode. Return to
normal mode before docking.
Do not connect the docking station when the battery is removed.
If thebattery is charged, you can connect the notebook to the docking station even when the notebook
is on.
Make sure all cables and peripherals are removed before connecting your main unit to the docking
station.
The LCD display may be damaged if you press the top of the notebook too forcefully.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
64
Disconnecting your computer from the docking station
To disconnect your computer from the docking station, proceed as follows:
1
2
3
4
If the notebook is off, simply follow steps 3 to 5.
If the notebook is on, click Start, then Eject PC or pull the UNDOCK switch towards you.
Close the cover of your notebook.
Grab the right and left release levers (1) and pull them to the outside until you hear two clicks.
5
Release the notebook from the docking station.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
65
✍ Do not undock the notebook when the docking station indicator is on. If you undock when the docking station indicator on the notebook is on, you
may lose data or malfunction may occur.
Make sure all cables and peripherals are removed before disconnecting the main unit from the docking station.
Make sure the battery is connected when you undock the main unit while it is running.
If you undock when battery power is low, you may lose data.
If the i.LINK™ device is connected, stop the i.LINK™ device before undocking.
You cannot undock when the notebook is in a power saving mode. Return to normal mode before undocking.
Do not place any objects on top of the notebook when you handle the release levers.
Do not wait too long before you release the notebook from the docking station.
Using the disc drive on the docking station
The docking station is equipped with a disc drive. From the docking station, you can listen to audio CDs or
use the recovery CDs, play DVDs and burn CDs.
To insert a disc, proceed as follows:
1
2
Turn on the computer.
Press the eject button to open the optical disc drive.
The tray slides out.
3
4
Place an optical disc in the middle of the tray with the label side facing up until the disc clicks into place.
Close the tray by pushing it gently.
✍ When the computer is in Standby or Hibernate mode, you cannot insert or remove a disc.
Be sure to seat the disc firmly over the disc drive hub fingers. If you do not seat the disc firmly, you could damage your disc drive and you may not be
able to open the tray.
When you finish using a disc, wait until the LED indicator turns off and then press the eject button to remove the disc.
If the disc does not come out when you press the eject button, go to Windows Explorer or My Computer. Select the drive, click the right button
of your mouse and select Eject. If it still does not work, turn off the computer and insert a thin, pointed object (e.g. a paper clip) into the manual
eject hole.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
66
Using the DVD function
To achieve optimum performance when playing DVD-ROM discs, you should follow these
recommendations.
❑
You can play DVDs using the DVD-ROM drive and the WinDVD software. See the help file on the WinDVD
software for details.
❑
❑
Close all open applications before playing a DVD-ROM movie.
When playing DVD movies on battery power, set the power management profile to DVD. With other
profiles, the movies can be choppy.
❑
❑
Do not switch power saving modes while playing a DVD video.
Do not use resident disc utilities or resident utilities to speed up the access of discs, because they may
cause the system to become unstable.
❑
❑
Make sure that the screensaver is deactivated.
Depending on the display setup properties you selected, you may use the <Fn>+<F> command to expand
the screen to full screen size.
❑
Region codes indicators are labeled on the DVD discs to indicate in which region and on what type of
player you can play the disc. Unless a '2' (Europe belongs to region '2') or 'all' (this means that you can
play this DVD everywhere in the world) is labeled on your DVD disc or on the packaging, you cannot play
the disc on this player.
❑
Do not try to change the region code settings of the DVD-ROM drive. Any difficulties caused by changing
the region code settings of DVD-ROM drive are out of warranty.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
67
Using the CD-RW function
To burn CDs, you can use CD-RW and CD-R discs:
❑
The CD-RW (CD-ReWritable) disc is a data memory medium that can be used to write, erase and rewrite
a program or other data.
❑
The CD-R (CD-Recordable) disc is a data memory medium that can be used to write a program or other
data, but once only.
To achieve optimum performance when writing data on a CD-RW disc, follow these recommendations :
❑
To make a CD-R’s data readable on a CD-ROM drive, you need to close the session when you eject it. To
complete this process, follow the instructions included with your software.
❑
Only use circular discs. Do not use discs with any other shape (star, heart, card, etc.), as this may damage
the CD-RW drive.
❑
❑
❑
Do not strike or shake the computer while writing data to a disc.
For optimal writing speed, deactivate the screensaver before writing data to a disc.
Memory-resident disc utilities may cause unstable operation or data loss. Deactivate these utilities before
writing data to a disc.
❑
For best results, use CD-Rs that are compatible with 4x speed, as the software pre-installed on your
computer is preset to that speed. Your VAIO notebook does not support 1x writing speed.
❑
❑
When using a software application to burn CDs, be sure to exit and close all other applications.
Never touch the surface of the disc. Fingerprints and dust on the surface of a disc may cause writing
errors.
❑
❑
Do not put your VAIO notebook into a power saving mode while using the pre-installed software.
Always use the AC adapter as the power source for your computer when you write data to a CD-RW or
CD-R. It is not possible to burn CDs when the CD-RW/DVD-ROM docking station is not connected to AC
power.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
68
Using the floppy disk drive on the docking station
The docking station is equipped with an internal floppy disk drive.
You can also use an external USB floppy disk drive on the undocked main unit. It is not possible to use any
USB floppy disk drive when the notebook is docked.
Inserting a diskette
To insert a diskette, proceed as follows:
1
2
Hold the diskette with the label side facing up.
Gently push the diskette into the floppy disk drive until it clicks into place.
Removing a diskette
To remove a diskette, proceed as follows:
1
2
Wait until the LED indicator turns off.
Press the eject button to remove the diskette.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
69
Connecting an external display
You can connect an external display to your notebook. For example, you can use your computer with the
following devices:
❑
❑
Computer display (monitor)
Projector
✍ Turn off your computer and the peripherals, unplug the AC adapter and the power cord before connecting the external display.
Connect the power cord after connecting all other cables.
Turn on the peripherals, then turn on your computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
70
Connecting a computer display
You can connect a computer display either directly to your notebook or via the docking station.
You may not be able to display the computer's LCD and the external display together, depending on the
type of computer display and projector used.
When you connect an external display to the monitor connector, you can press <Fn>+<F7> to toggle the
output between the Liquid Crystal Display (LCD), the external monitor or both devices.
To connect a computer display to your notebook, proceed as follows:
1
2
Plug the monitor plug (1) into the notebook monitor connector (2).
Plug the power cord (3) into an AC outlet.
✍ You cannot use the monitor connector on your notebook when the docking station is connected to the notebook.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
71
To connect a computer display to the docking station, proceed as follows:
1
2
Plug the monitor plug (1) into the docking station monitor connector (2).
Plug the power cord (3) into an AC outlet.
✍ If the main unit is docked, you can only use the monitor connector on the docking station.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
72
Connecting a projector
You can connect a projector (such as the Sony LCD projector) directly to your notebook or via the docking
station.
To connect a projector to your notebook, proceed as follows:
1
2
3
Plug the RGB signal cable (1) into the notebook monitor connector identified by the monitor symbol.
Plug the audio cable (2) into the earphone connector identified by the
Connect the power cord (3) of the projector into an AC outlet.
symbol.
✍ You cannot usethemonitor connector on your notebook when the
docking station is connected to the notebook.
i
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
73
To connect a projector to your docking station, proceed as follows:
1
Plug the RGB signal cable (1) into the docking station monitor connector identified by the monitor
symbol.
2
3
Plug the audio cable (2) into the notebook earphone connector identified by the
Connect the power cord (3) of the projector into an AC outlet.
symbol.
✍ If the main unit is docked, you can only use the monitor connector on the docking station.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
74
Connecting external speakers
You can enhance the sound quality of your computer by connecting external speakers.
To connect external speakers, proceed as follows:
1
2
Plug the speaker cable into the notebook earphone connector identified by the
Turn down the volume of the speakers before you turn them on.
symbol.
✍ Make sure your speakers are designed for computer use.
Do not place diskettes on the speakers; their magnetic field may damage the data on the diskettes.
Connecting an external microphone
It is possible to plug in an external microphone to your VAIO notebook.
To connect an external microphone, proceed as follows:
Plug the microphone cable into the microphone connector identified by the
symbol.
✍ Make sure your microphone is designed for computer use.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
75
Connecting a Universal Serial Bus (USB) mouse
You can connect a USB device (e.g. mouse, floppy disk drive, printer…) to your notebook or to your docking
station. If the main unit is docked, you can only use the USB connectors on the docking station.
To connect a USB mouse to the notebook, proceed as follows:
Plug the USB cable (1) into one of the notebook USB connectors (2) identified by the symbol.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
76
To connect a USB mouse to the docking station, proceed as follows:
Plug the USB cable (1) into one of the docking station USB connectors (2) identified by the symbol.
✍ You do not need to shut down the computer before connecting or disconnecting a USB peripheral.
You can connect the optional Sony USB mouse (PCGA-UMS1 series). As the driver for this mouse is preinstalled on your computer, you can use the
mouse by just connecting it.
Connecting a printer
You can connect a Windows-compatible printer to your computer to print documents.
Connecting a printer using the USB connector
To connect a printer using the USB connector, proceed as follows
1
Plug an optional USB printer cable into one of the USB connectors on your computer or your docking
station. A USB connector is identified by the symbol.
2
Plug the printer power cord into an AC outlet.
✍ Before using the printer, you may need to change the Printer settings in the Sony Notebook Setup software.
Turn off your computer and the printer, unplug the AC adapter and the power cord before connecting the printer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
77
Connecting a printer using the printer connector
The docking station (optional) is equipped with a printer connector.
To connect a printer using the printer connector, proceed as follows:
1
Plug the printer cable (1) supplied with the printer into the docking station printer connector (2)
identified by the symbol.
Plug the printer power cord (3) into an AC outlet.
2
✍ Before using the printer, you may need to change the Printer settings in the Sony Notebook Setup software.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
78
Connecting an i.LINK™ device
Your computer includes an i.LINK™ (IEEE1394) connector, which you can use to connect to an i.LINK™ device
such as a digital video camera recorder or to connect two VAIO notebooks in order to copy, delete or edit
files.
The i.LINK™ connector of your notebook does not supply power to external devices generally powered by
i.LINK™ connectors.
The i.LINK™ connector supports transfer rates up to 400 Mbps; however, the actual transfer rate depends
on the transfer rate of the external device.
The i.LINK™ features available may vary depending on the software applications you use. Refer to the
documentation that came with your software for more information.
i.LINK™ cables compatible with your VAIO notebook include cables with the following part numbers:
VMC-IL4415A (a 1.5 meter cable with a 4-pin connector at each end), VMC-IL4408Series (a 0.8 meter cable
with a 4-pin connector at each end).
❑
❑
Connecting a digital video camera recorder (page 79)
Connecting two VAIO notebooks (page 81)
✍ An i.LINK™ connection with other compatible devices is not fully guaranteed.
The i.LINK™ connection varies depending on the software applications, operating system and i.LINK™ compatible devices you use. Refer to the
documentation that came with your software for more information.
Check the working conditions and OS compatibility of i.LINK™-compatible PC peripherals (HDD, CD-RW drive etc.) before you connect them to your
notebook.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
79
Connecting a digital video camera recorder
To connect a digital video camera recorder to your notebook, proceed as follows:
1
Plug one end of the i.LINK™ cable (1) into the i.LINK™ connector (2) of the computer and the other end
into the DV Out connector (3) on the digital video camera recorder.
2
Launch the DVgate application.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
80
To connect a digital video camera recorder to the docking station, proceed as follows:
1
Plug one end of the i.LINK™ cable (1) into the i.LINK™ connector (2) of the docking station and the other
end into the DV Out connector (3) on the digital video camera recorder.
2
Launch the DVgate application.
✍ On Sony digital video cameras, connectors labeled DV Out, DV In/Out or i.LINK™ are i.LINK™-compatible.
The Sony digital video camera recorder is an example; your digital video camera recorder may need to be connected differently.
If your digital video camera recorder includes a Memory Stick™ slot, you can copy images from it to your computer via a Memory Stick™. To do so,
simply copy images on the Memory Stick™, then insert it into the Memory Stick™ slot of your computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
81
Connecting two VAIO notebooks
You can copy, edit or delete files on another VAIO computer to your computer with an optional i.LINK™
cable. If the second computer has the Windows® XP operating system, you just need the i.LINK™ cable. If
the second computer has a different operating system (for example, Windows® 2000), you need a software
application such as Smart Connect. You can also print a document on a printer connected to another VAIO
computer.
If the notebook is connected to the optional docking station, proceed as follows to exchange data with
another computer using an i.LINK™ cable (optional):
1
2
3
Disconnect your notebook from the docking station.
Disconnect all cables from the docking station.
Set the i.LINK™ network switch on the bottom of the docking station to the position marked by a dot
(to the right) by means of a thin pen tip.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
82
4
Connect the docking station to your notebook as described in Connecting a docking station
(page 60).
5
6
Turn on the notebook.
Connect your computer to another computer with the i.LINK™ cable.
✍ When you use Smart Connect to connect two VAIO computers, you must assign each computer a unique name by which it can be identified when the
two computers are networked.
Do not set the i.LINK™ network switch on the docking station when the notebook is on. It causes malfunction.
Set the i.LINK™ network switch on the docking station after removing all cables connected to the docking station.
When using Smart Connect, do not connect or remove the docking station. Smart Connect may become unavailable.
Set the i.LINK™ network switch to the off position once you have finished exchanging data.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
83
Connecting to a network (LAN)
You can connect your notebook or your docking station to 10BASE-T/100BASE-TX-type networks via an
Ethernet network cable. For the detailed settings and devices needed to connect to the network, consult
your Network Administrator.
To connect your notebook to a LAN, proceed as follows:
Connect the network cable to the Ethernet network connector (1) on the notebook.
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting peripheral devices
n N
84
To connect your docking station to a LAN, proceed as follows:
Connect the network cable to the Ethernet network connector (1) on the docking station.
✍ If the main unit is docked, you can only use the ethernet network connector on the docking station.
For more information about connecting your notebook to the network, please consult the Hardware troubleshooting section of the VAIO-Link website:
How to troubleshoot network problems
!
Do not plug a phone cable into the Ethernet network connector on your notebook.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting help
n N
85
Getting help
This section describes how to get help and support from Sony, and provides troubleshooting tips for your
computer.
Sony support options
Sony provides several support options for your computer.
Printed documentation supplied with your notebook
❑
A Getting Started brochure, where you can find a brief description of the items in your box, some
specifications of your notebook, and how to set up your notebook;
❑
A Troubleshooting Guide, where you can find all the basic information you need to start using your
notebook, as well as troubleshooting and VAIO-Link information;
❑
❑
❑
❑
Your Sony Guarantee conditions;
A Safety Regulations leaflet;
A Wireless Lan Regulations leaflet;
A Modem Regulations leaflet.
Online documentation
1
The Hardware Guide:
❑ Using your notebook shows you how to use the standard components of your system. In this part
of the manual you will also find out what you can do with a Memory Stick™ and how to use the
Wireless LAN functions.
❑ Connecting peripheral devices explains how you can add functionality by connecting various
peripherals.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting help
n N
86
❑ Getting Help explains the support options available to you, and offers basic troubleshooting tips.
❑ Precautions provides facts and advice about using your notebook.
❑ Glossary refers to terms used in this manual.
2
Refer to your Software Guide for information on the bundled software and the Sony applications.
❑ About the Software on your computer is a short description of the features of the software pre-
installed on your system.
❑ Using Video software explains how to use Sony video software: DVgate, MovieShaker and Smart
Capture.
❑ Managing audio files with SonicStage explains how to convert your existing MP3, WMA and
WAV format audio files into ATRAC3 format.
digital camera.
❑ Customizing your computer explains how to set up your system and power management.
❑ Installing and updating applications explains how to install, run or uninstall a software
application.
❑ Managing drivers explains how to install, update or uninstall a driver.
❑ Using the Product Recovery CD-ROMs explains how to perform a system and application recovery.
❑ Using partitioned drives tells you what you can do with partitioned drives.
3
4
Refer to the Specifications online document for details on your computer, drivers and accessories.
In the VAIO-Link Customer Service Guide you will find all the VAIO-Link information you need,
including specific contact numbers and addresses for each country.
5
Consult the Online Help files of the software you are using for detailed information on features and
troubleshooting.
6
7
Refer to the Microsoft Quick Start manual for more information on Windows®.
Go to http://www.club-vaio.sony-europe.com to find online tutorials about your favourite VAIO
Download from Www.Somanuals.com. All Manuals Search And Download.
software.
Getting help
n N
87
Other sources of information
❑
The Online help files that accompany your pre-installed software contain instructions on using the
❑ VAIO-Link website: if you have any problem with your computer, you can access the VAIO-Link web
site. Go to:
http://www.vaio-link.com
❑ VAIO-Link: Before contacting VAIO-Link, try to solve the problem by reading the User Guides and help
files for the peripherals or software.
✍ You need to plug in the phone line and configure your modem for use before using the communication features described in this manual.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting help
n N
88
Troubleshooting
❑
❑
❑
❑
❑
❑
❑
❑
❑
❑
About the display (page 92)
About sound (page 97)
About the docking station (page 98)
About the modem (page 99)
About peripherals (page 100)
About digital video captures and DVgate (page 101)
About i.LINK™ devices (page 101)
About Wireless LAN (page 101)
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting help
n N
89
About the computer and software
My computer does not start
❑
❑
❑
❑
❑
❑
Check that the computer is plugged into a power source and that it is turned on.
Check that the power indicator on the front panel of the computer indicates that the power is on.
Check that the battery packs are inserted properly and that they are charged.
Make sure there is no diskette in the floppy disk drive.
Confirm that the power cord and all cables are connected firmly.
If you have plugged the computer into a UPS (Uninterruptible Power Supply), make sure the UPS is
turned on and works.
❑
If you are using an external display, check that it is plugged into a power source and turned on. Check
that you have switched to the external display and that the brightness and contrast controls are adjusted
correctly.
❑
❑
Moisture condensation may have occurred. Do not use the computer for at least one hour and then turn
it on.
When the internal backup battery is low on power, it may not be able to start your system properly.
The message Press <F1> to resume, <F2> to setup appears at startup
If the floppy disk drive is empty, proceed as follows to initialise the BIOS:
1
2
3
Turn off the computer.
Remove any peripheral devices connected to the computer.
Turn on the computer and press <F2> when the Sony logo appears.
The BIOS setup menu screen appears.
4
Set the date (month/day/year).
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting help
n N
90
5
6
7
8
9
Press <Enter>.
Press the arrow keys to select System Time.
Set the time (hour:minute:second).
Press <Enter>.
Press the arrow keys to select the Exit menu.
10 Press the arrow keys to select Get Default Values and then press <Enter>. The message Load default
configuration now? appears.
11 Make sure that Yes is selected and then press <Enter>.
12 Press the arrow keys to select Exit (save changes) and then press <Enter>.
The Save configuration changes and exit now? message appears.
13 Make sure that Yes is selected and then press <Enter>.
My computer does not shut down
You are recommended to shut down your computer using the Turn Off command on the Windows® Start
menu. Using other methods, including those listed here, may result in loss of unsaved data. If the Turn Off
command does not work properly, proceed as follows:
❑
❑
❑
❑
Press <Ctrl>+<Alt>+<Delete>. If you have not changed the default settings, you will enter the Task
Manager, where you can close any application that cannot close normally, and restart your system.
If this does not work, press <Alt>+<F4> to get to the Turn off computer screen, from where you can
shut down or restart your computer.
If this does not work, press the power button and hold it for at least four seconds.
This turns off the power.
Unplug the computer from the AC adapter and remove the battery pack from your computer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting help
n N
91
My computer locks up
❑
If you suspect one application is locking your system, you can try to stop it. To do this, press
<Ctrl>+<Alt>+<Delete> simultaneously. If you have not changed the default settings, you will enter the
Task Manager. Select the application or process that is locking your system, and then click End Task.
❑
If the above method does not work or you do not know which application is locking your system, restart
the computer. On the Windows® taskbar, click the Start button, click Turn Off Computer, and then
select Turn Off.
❑
❑
If the above method does not work, press the power button and hold it for at least four seconds. This
turns off the power.
If your computer locks up while playing a CD-ROM, stop the CD-ROM, and shut down the computer by
pressing <Alt>+<F4> and clicking Turn Off in the Turn off computer screen.
My software program locks up or crashes
❑
❑
❑
Make sure the software is compatible with your equipment and operating system.
Try re-installing the software.
If there is still a problem, contact the software publisher or designated provider for technical support.
My touchpad interprets a single tap as a double-click
Open the Mouse icon in the Control Panel and change the button assignments in the Mouse Properties
dialog box. One of the buttons is assigned to the double-click action.
My mouse does not work
❑
❑
Check that the USB mouse is plugged into the USB connector.
If you are using an optional Sony USB mouse, check that the appropriate driver and mouseware are
properly installed.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting help
n N
92
About the display
My LCD does not display anything
❑
❑
❑
❑
❑
❑
Check that the computer is plugged into a power source and that it is turned on.
Check that the power indicator on the front panel of the computer is on.
Check that the battery packs are inserted properly and that they are charged.
Adjust the brightness of the LCD.
The computer may be in LCD (video) standby mode. Press any key to activate the display.
The display mode may be set to external display mode. Press and hold the <Fn> key while pressing <F7>
several times.
The screen image on my external display is not centred or sized properly
Use the controls on your external display to adjust the image.
The window I have just closed continues to appear on my LCD
Press the <Windows®> key and <D> key twice to refresh the screen.
About CD-ROMs and diskettes
My CD-ROM drive tray does not open
❑
❑
Make sure the computer is turned on and press the eject button on the drive.
If the disc does not come out when you press the eject button, go to My Computer. Select the drive,
click the right button of your mouse and select Eject.
❑
If it still does not work, turn off the computer and insert a thin, pointed object (for example, a paper clip)
into the manual eject hole near the eject button.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting help
n N
93
I cannot play a CD-ROM
❑
❑
❑
After inserting the CD, wait for a few seconds for the system to detect it before you try to access it.
Make sure the label of the disc is facing up.
If the disc requires software, make sure the software is installed according to the instructions of the
program.
❑
❑
❑
Check the volume of your speakers.
Clean the disc with an appropriate cleaner.
Moisture condensation may have occurred. Do not use the computer for at least 1 hour before turning
it on.
I cannot play a DVD-ROM
❑
If a region code warning appears when you are using the DVD player, it could be that the DVD-ROM you
are trying to play is incompatible with the DVD-ROM drive on your notebook. The region code is listed
on the packaging of the disc.
❑
❑
If you hear sound but cannot see a picture, your computer's video resolution may be set too high. For
best results, change the resolution in Windows® Control Panel - Display to a lower resolution.
If you see a picture but cannot hear any sound, check all of the following:
❑
Make sure the mute setting is off on your DVD player.
❑
Check the master volume setting of the Volume Control. If you have connected speakers externally,
check the volume settings of your computer speakers and check the connections between your
speakers and the computer.
❑
In the Device Manager, check that the correct drivers are installed properly. To display the Device
Manager, click Start, and select Control Panel. Double-click the System icon. On the Hardware
tab, click the Device Manager button.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting help
n N
94
❑
❑
A dirty or damaged disc may cause the computer to 'hang' while it tries to read the disc. If necessary,
reboot the computer, remove the disc and then check that it is not dirty or damaged.
Check your PG (Parental Guidance) settings in the DVD software as this might be preventing you from
playing certain DVDs when it is activated.
✍ On your computer, the default DVD region code is 2. Do not change this setting using the Region Code Change function in Windows®, or using any
other software applications. System malfunctions originating from the user changing the DVD region code, are beyond the scope of your warranty
and will result in service charges for repair.
The reading speed of CD-RWs is slow
Generally, the reading speed of a CD-RW is slower than that of a CD-ROM or CD-R. The reading speed can
also vary depending on the type of format.
Why does my CD-RW drive not record at the highest speed?
You must use 8x CD-R or 4x CD-RW media or higher to achieve optimum performance.
If you want to use other media and are having difficulty formatting non-4x CD-RW discs, change the writing
speed from 4x to a lower setting.
To change the writing speed from the default to a lower speed, proceed as follows:
1
2
3
4
5
6
Go to My Computer from the Start menu.
Right-click the disc drive icon.
Select Properties.
Select the Settings tab.
Change the Current Write Speed field to 2x.
Click OK.
✍ The VAIO notebook has a maximum recording rate of 8x for CD-R and 4x for CD-RW discs.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting help
n N
95
When I double-click an application icon a message such as 'You must insert the application CD into your
CD-ROM drive' appears and the software does not start.
❑
Some titles require specific files that are located on the application CD-ROM. Insert the disc and try
starting the program again.
❑
Make sure you place the disc in the tray with the label side facing up.
The disc tray does not eject even when the eject button is pressed
❑
❑
Check that the notebook is turned on.
The CD-writing application software may be stopping the disc from being ejected.
The disc tray ejects even when it has been locked into place
❑
❑
❑
Ensure that the disc is placed with the label side facing up.
The disc may be scratched. Place another disc to see if that is the reason.
There may be condensation in the drive. Remove the disc and leave the drive open for approximately
one hour.
My floppy disk drive cannot write to a diskette
❑
The diskette is write-protected. Disable the write-protect feature or use a diskette that is not write-
protected.
❑
❑
Check that the diskette is properly inserted into the floppy disk drive.
Your diskette may be corrupt. Try to insert another diskette.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting help
n N
96
The optional PCGA-UFD5 (USB) floppy disk drive is not recognised as drive A
To set the UFD5 to A, proceed as follows :
1
2
3
4
5
6
7
8
9
Turn the system power on.
Connect the UFD5.
Select Control Panel from the Start menu.
Double-click System.
Select the Hardware tab, then click Device Manager.
Select Universal Serial Bus controllers, then Y-E Data USB Floppy.
From the Action menu, click Uninstall.
Keep clicking OK until the Confirmation of deletion of device message appears.
Select Scan for hardware changes from the Action menu.
The UFD5 is recognised as drive A.
The floppy disk drive in the docking station connected to the notebook is not recognised as drive A
To set the docking station floppy disk drive to A, proceed as follows :
1
2
3
4
5
6
7
8
Turn the system power off and disconnect all peripherals.
Connect the docking station, then turn the system power on.
Select Control Panel from the Start menu.
Double-click System.
Select the Hardware tab, then click Device Manager.
Select Floppy disk controllers, then Standard floppy disk controller.
From the Action menu, click Uninstall.
Keep clicking OK until the Confirmation of deletion of device message appears.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting help
n N
97
9
Perform the Scan for hardware changes from the Action menu.
The docking station floppy disk drive is recognised as drive A.
About sound
My speakers are not producing sound
❑
The built-in speakers may be turned off. Press <Fn>+<F3> to turn on the speakers.
❑
The speaker volume may be turned to the minimum. Press <Fn>+<F4>, and then press or
to increase
the volume.
❑
❑
❑
❑
If your computer is powered by battery, check that the battery is inserted properly and that it is charged.
If you are using an application that has its own volume control, check that the volume is turned up.
Check the volume controls in Windows®.
If you use external speakers, check that the speakers are properly connected and the volume is turned
up. If the speakers have a mute button, make sure it is off. If batteries power the speakers, check that
the batteries are inserted properly and that they are charged.
❑
If you have connected an audio cable or a set of headphones to the headphone connector, disconnect
the cable.
My microphone does not work
If you are using an external microphone, check that the microphone is plugged into the microphone
connector correctly.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting help
n N
98
About the docking station
I cannot operate the CD-RW/DVD-ROM drive or the DVD-ROM drive in the docking station connected to the
notebook
To switch on the i.LINK™ network switch, proceed as follows :
1
2
3
Disconnect your notebook from the docking station.
Disconnect the AC adapter and all cables from the docking station if necessary.
Set the i.LINK™ network switch on the bottom of the docking station to the unmarked side with a thin
pen tip.
4
5
Connect the docking station to your notebook.
Turn on your notebook.
You can now operate the CD-RW/DVD-ROM drive or the DVD-ROM drive.
✍ Do not set the i.LINK™ network switch when the notebook is on. It causes malfunction.
Set the i.LINK™ network switch after removing all cables connected to the docking station.
I cannot operate the CD-RW/DVD-ROM drive or the DVD-ROM in the docking station connected to the
notebook when the notebook is connected to another computer by means of an i.LINK™ cable
Set the i.LINK™ network switch on the bottom of the docking station to the On position.
I cannot remove the disc inserted in the drive
You cannot remove discs when the computer is in a power saving mode. Return to normal mode and then
press the eject button.
When I disconnect the docking station, a warning message appears
Close all open applications and disconnect the peripheral devices, then disconnect the docking station by
following the procedure in Disconnecting your computer from the docking station (page 64).
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting help
n N
99
About the modem
My internal modem does not work
❑
❑
Check that the phone line is plugged into your computer.
Check that the phone line is working. You can check the line by plugging in an ordinary phone and
listening for a dial tone.
❑
❑
Check that the phone number the program is dialling, is correct.
In the Phone and Modem Options dialog box (Control Panel / Phone and Modem Options), check
that your modem is listed on the Modems tab, and that the location information is correct on the
Dialing Rules tab.
❑
Each time you use your modem while travelling, make sure that the country of the active location
defined in the Phone and Modem Options dialog box matches the country you are dialling from.
My modem cannot establish a connection
The modem dialling mode may be incompatible with your telephone line.
My modem connection is slow
Many factors influence modem connection speed, including telephone line noise or compatibility with
telephone equipment (such as fax machines or other modems). If you think your modem is not connecting
properly to other PC-based modems, fax machines, or your Internet Service Provider, check the following:
❑
❑
Have your phone company check that your phone line is free from any line noise.
If your problem is fax-related, check that there are no problems with the fax machine you are calling and
that it is compatible with fax modems.
❑
❑
If you are having a problem connecting with your Internet Service Provider, check that the ISP is not
experiencing technical problems.
If you have a second phone line available, try connecting the modem to that line.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting help
n N
100
About peripherals
I cannot use DV devices. The message 'DV equipment seems to be disconnected or turned off' appears
❑
❑
Check that the DV device is turned on and that the cables are properly connected.
If you are using multiple i.LINK™ devices, the combination of the connected devices may cause unstable
operation. In this case, turn off the power of all connected devices and disconnect unused devices. Check
the connection and then turn on the power again.
❑
❑
Use manual import/export in DVGate motion if problems occur with third party cameras.
You are strongly advised to use only Sony i.LINK™ cables, as using other brands may cause problems with
the i.LINK™ devices.
I cannot print
❑
❑
Check that the printer cables are correctly connected.
Check that your printer is correctly configured and that you have up-to-date drivers. If needed, contact
your dealer.
❑
The default setting for the printer port mode is correct for most printers. If you cannot print, try
changing the printer port mode. In Sony Notebook Setup, select the Printer tab. If the printer port
mode is set to ECP, change it to bi-directional. If the printer port mode is set to bi-directional, change
it to ECP.
❑
❑
Check the cable to see if you do not have missing of bend pins.
Try a printer self test (if available) to see if the printer itself is still functioning properly. For more
information, please consult the manual supplied with your printer.
❑
Some printers have a specific installation procedure. Please check the manual supplied with your printer.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting help
n N
101
About digital video captures and DVgate
While I am recording images to a digital video device using DVgate, my system displays the message
'Recording to DV device failed. Check the power and cable connections to the DV device and try the
operation again...'
❑
Close all open applications and restart your computer. Frequent recording of images to a digital video
device while using DVgate sometimes causes this error.
❑
Your DV device will need to have DV In/Out in order to be able to transfer your files to the DV device.
About i.LINK™ devices
I cannot establish an i.LINK™ connection between two VAIO computers
❑
❑
❑
Disconnect then reconnect the i.LINK™ cable.
If you still have no connection after waiting for a while, restart both computers.
If either computer has just returned from a power saving mode, the connection may be affected. In this
case, make sure you perform a full restart before connecting them.
About Wireless LAN
I cannot use the Wireless LAN function
❑
Check if the Wireless switch on the front side of the machine is turned on.
The Wireless LAN Access Point and your computer cannot communicate
❑
❑
Check if the Wireless LAN switch on the front side of the computer is turned on.
Check if the power of the Access Point is turned on.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting help
n N
102
❑
Check if the Access Point is displayed in the Available networks window.
❑
❑
❑
❑
❑
❑
To check this, click Start and then Control Panel.
Double-click the Network Connections icon.
Right-click the Wireless Network Connection icon and select Properties.
Select the Wireless Networks tab.
Check if the Access Point is displayed in Available networks.
Connection availability is affected by distance and obstructions. You may need to move your
computer away from obstructions or neared to any Access Point you may be using.
The data transfer speed is slow
❑
The maximum communication speed can vary depending on the obstacles or the distance between the
communication devices, the radio waves, the operating system or the software you use. Remove the
obstacle or make the distance between the Access Point and your machine smaller.
❑
❑
It is possible that your Access Point communicates at the same time with another Access Point. Read the
manual of the Access Point.
If several computers communicate with the same Access Point, the concentration may be too high. Wait
a few minutes and try to access again.
I cannot access the Internet
❑
❑
❑
Check the settings of the Access Point. See the manual of the Access Point.
Check if your computer and the Access Point are communicating.
Make the distance between the Access Point and your machine smaller.
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting help
n N
103
The maximum communication speed is not reached
The maximum communication speed is 11 Mbps, but this can never be reached. The normal speed is 4 to
5 Mbps. The communication speed slows down when transferring MPEG2 data.
The file transfer is interrupted
This can happen when the file size is too big.
You need to temporarily change a setting. After transferring the necessary files, you need to change the
setting back to its original state.
To change the setting, proceed as follows:
1
2
3
4
5
6
Click Start and then Control Panel.
Double-click the Network Connections icon.
Right-click the Wireless Network Connection icon and select Properties.
Select the Wireless Networks tab.
Clear the Use Windows to configure my wireless network settings check box.
Click OK.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
n N
104
Precautions
This section describes safety guidelines and precautions to help you protect your computer from potential
damage.
Your notebook and memory modules use high precision components and electronic connectors technology.
To avoid the invalidation of your guarantee by mishandling, it is recommended that:
❑
❑
❑
You contact your dealer to install a new memory module.
You do not install it yourself, if you are not familiar with upgrading memory on a notebook.
You do not touch the connectors or open the memory panel.
Please contact VAIO-Link if you need assistance.
Adding and removing memory*
In the future you may want to install memory modules to expand the functionality of your computer. You
can increase the memory by installing optional memory modules.
Be careful when adding memory. Mistakes on installation or removal of the memory module may cause a
malfunction.
For memory upgrades, use only PC133 (CL2) SDRAM SO-DIMM (gold leaf contacts).
Electrostatic discharge can damage electronic components. Before touching a memory expansion board,
ensure the following:
❑
❑
Handle the memory module gently.
The procedures described in this document assume familiarity with the general terminology associated
with personal computers and with the safety practices and regulatory compliance required for using and
modifying electronic equipment.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
n N
105
❑
❑
Disconnect the system from its power source and from any telecommunication links, networks, or
modems before you open the system. Failure to do so may result in personal injury or equipment
damage.
Electrostatic Discharge (ESD) can damage memory modules and other components. Install the memory
Module only at an ESD workstation. If such a station is not available, do not work in a carpeted area, and
do not handle materials that produce or hold static electricity (cellophane wrappers, for example).
Ground yourself by maintaining contact with an unpainted metal portion of the chassis while
performing the procedure.
❑
Do not open the memory module package until you are ready to install the module. The package
protects the module from ESD.
!
!
Use the special bag delivered with the memory module or wrap the module in aluminium foil to protect it from electrostatic discharge.
Do not place the memory module in places subject to:
- Heat sources such as radiators or air ducts,
- Direct sunlight,
- Excessive dust,
- Mechanical vibration or shock,
- Strong magnets or speakers that are not magnetically shielded,
- Ambient temperature of more than +35°C or less than +5°C,
- High humidity.
!
Be careful when adding memory. Mistakes on installation or removal of the memory module may cause a malfunction.
*Depending on the configuration of your notebook, the number of available memory module slots can vary.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
n N
106
Changing or adding a memory module
To change or add a memory module, proceed as follows:
1
2
3
4
Shut down your computer and disconnect all peripheral devices.
Unplug the computer and remove the battery pack.
Wait until the computer cools down.
Unscrew the two screws at the bottom of your computer.
5
6
Slide the LCD lock lever and lift the cover.
Slide the keyboard toward the LCD display, then lift it away slightly.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
n N
107
7
Lift the keyboard from the LCD display side and gently turn it over the touchpad. Be careful not to detach
the cable (1) when lifting the keyboard.
8
9
Touch a metal object (such as the connector panel on the back of your computer) to discharge static
electricity.
Remove the memory module:
❑
❑
Pull the tabs in the direction of the arrows.
The memory module is released.
Pull the memory module in the direction of the arrow.
10 Remove the new memory module from its packaging.
11 Install the memory module. Be careful not to touch the other components on the motherboard.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
n N
108
❑
❑
Slide the memory module into the slot.
Snap the connectors into place when the board is correctly seated.
12 Gently replace the keyboard, then press it into your computer. Be careful not to detach the cable when
lifting the keyboard.
13 Close the computer cover, then tighten the screws on the bottom of the computer.
14 Reinsert the battery and turn the computer on.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
n N
109
Viewing the amount of memory
To view the amount of memory, proceed as follows:
1
2
Turn on the computer.
Go to Sony Notebook Setup via the Start menu.
The Sony Notebook Setup dialog box appears.
3
In the About this Computer tab you can view the amount of system memory. If the additional memory
does not appear, repeat the whole procedure and restart the notebook.
Other precautions
On handling the hard disk
The hard disk has a high storage density and reads or writes data in a short time. On the other hand, it may
be easily damaged by mechanical vibration, shock or dust.
Although the hard disk has the safety device in itself to prevent losing data due to mechanical vibration,
shock or dust, you should be careful when handling your computer.
To avoid damaging your hard disk:
❑
❑
❑
❑
❑
❑
Do not give a shock to your computer.
Keep away from magnets.
Do not place your computer in a location subject to mechanical vibration or in unstable situation.
Do not move your computer while the power is on.
Do not turn off the power or restart the computer while reading or writing data.
Do not use your computer in a place subject to extreme change of temperature.
✍ If the hard disk is damaged, the data cannot be restored.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
n N
110
On handling the LCD screen
❑
Do not leave the LCD facing the sun as it can damage the LCD. Be careful when using the computer near
a window.
❑
❑
Do not scratch the LCD or exert pressure on it. This could cause malfunction.
Using the computer in low temperature conditions may produce a residual image on the screen. This is
not a malfunction. When the computer returns to normal temperature, the screen returns to normal.
❑
A residual image may appear on the screen if the same image is displayed for a lengthy period of time.
The residual image disappears in a while. You can use a screensaver to prevent residual images.
❑
❑
The screen becomes warm during operation. This is normal and does not indicate a malfunction.
The LCD is manufactured using high-precision technology. You may, however, see tiny black points and/
or bright points (red, blue, or green) that continuously appear on the LCD. This is a normal result of the
manufacturing process and does not indicate a malfunction.
❑
Avoid rubbing the LCD screen, as this can damage the screen. Use a soft, dry cloth to wipe the LCD screen.
On using power source
❑
❑
❑
Your computer operates on 100V-240V AC 50/60 Hz.
Do not share the AC outlet with other power-consuming equipment, such as a photocopier or shredder.
You can purchase a power strip with a surge protector. This device prevents damage to your computer
caused by sudden power surges such as those that may occur during an electrical storm.
❑
❑
❑
❑
❑
Do not place heavy objects on the power cord.
To disconnect the cord, pull it out by the plug. Never pull the cord itself.
Unplug your computer from the wall outlet, if you will not be using the computer for a long time.
When the AC adapter is not used, unplug it from the AC outlet.
Use only the supplied AC adapter. Do not use any other AC adapter.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
n N
111
On handling your notebook
❑
Clean the cabinet with a soft, dry cloth or a soft cloth lightly moistened with a mild detergent solution.
Do not use any type of abrasive pad, scouring powder, or solvent such as alcohol or benzine, as these
may damage the finish of your computer.
❑
Should any solid object or liquid fall into the computer, shut down your computer and then unplug it.
You may want to have the computer checked by qualified personnel before operating it any further.
❑
❑
Do not drop the computer or place heavy objects on top of the computer.
Do not place your computer in a location subject to:
❑
❑
❑
❑
❑
❑
❑
❑
Heat sources, such as radiators or air ducts,
Direct sunlight,
Excessive dust,
Moisture or rain,
Mechanical vibration or shock,
Strong magnets or speakers that are not magnetically shielded,
Ambient temperature of more than 35ºC or less than 10ºC,
High humidity.
❑
❑
Do not place electronic equipment near your computer. The electromagnetic field of your computer may
cause a malfunction.
Provide adequate air circulation to prevent that internal heat builds up. Do not place your computer on
porous surfaces such as rugs or blankets, or near material such as curtains or draperies that may block its
ventilation slots.
❑
❑
The computer uses high-frequency radio signals and may cause interference to radio or TV reception.
Should this occur, relocate the computer a suitable distance away from the set.
Use only specified peripheral equipment and interface cables; otherwise, problems may result.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
n N
112
❑
❑
Do not use cut or damaged connection cables.
Your computer cannot be connected to a coin-operated telephone, and may not work with a private
branch exchange (PBX).
❑
If the computer is brought directly from a cold location to a warm one, moisture may condense inside
your computer. In this case, allow at least one hour before turning on your computer. If any problem
occurs, unplug your computer and contact VAIO-Link.
❑
❑
Make sure to disconnect the power cord before cleaning the computer.
As you may lose important data once your computer is damaged, you should back up your data regularly.
Restore the original application programs from the Product Recovery CD-ROM.
On handling diskettes
❑
❑
❑
Do not open the shutter manually and touch the surface of the diskette.
Keep diskettes away from magnets.
Keep diskettes away from direct sunlight and other heat sources.
On handling CD-ROMs
❑
❑
❑
Do not touch the surface of the disc.
Do not drop or bend the disc.
Fingerprints and dust on the surface of a disc may cause read errors. Always hold the disc by its edge and
its central hole, as shown:
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
n N
113
❑
Proper care of the disc is essential to its continuous reliability. Do not use solvents such as benzine,
thinning agents, commercially available cleaners or anti-static spray, as they may cause damage to the
disc.
❑
❑
For normal cleaning, hold the disc by its edge and use a soft cloth to wipe the surface from the centre
out.
If the disc is badly soiled, moisten a soft cloth with water, wring it out well, and use it to wipe the surface
of the disc from the centre out. Wipe off any remaining moisture with a dry soft cloth.
On using the battery pack
❑
❑
❑
❑
Never leave the battery pack in temperatures above 60°C, such as in a car parked in the sun or under
direct sunlight.
Battery life is shorter in a cold environment. This is due to decreased battery efficiency at low
temperatures.
Charge the batteries at temperatures between 10°C to 30°C. Lower temperatures require a longer
charging time.
While the battery is in use or being discharged, the battery pack heats up. This is normal and is not cause
for concern.
❑
❑
❑
❑
❑
Keep the battery pack away from all sources of heat.
Keep the battery pack dry.
Do not open or try to disassemble the battery pack.
Do not expose the battery pack to any mechanical shock.
If you are not using the computer for an extended period of time, remove the battery pack from the
computer to prevent damage to the battery.
❑
If, after fully charging the battery pack, the battery power is still low, the battery pack may be reaching
the end of its life and should be replaced.
❑
❑
You do not need to discharge the battery before recharging.
If you have not used the battery pack for a considerable amount of time, recharge the battery.
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
n N
114
On using headphones
❑ Road safety – Do not use headphones while driving, cycling, or operating any motorised vehicle. It may
create a traffic hazard and is illegal in some areas. It can also be potentially dangerous to play loud music
while walking, especially at pedestrian crossings.
❑ Preventing hearing damage – Avoid using headphones at high volume. Hearing experts advise
against continuous, loud and extended play. If you experience a ringing in your ears, reduce the volume
or discontinue use.
On handling the Memory Stick™
❑
❑
❑
❑
❑
❑
Do not touch the Memory Stick™ connector with your finger or metallic objects.
Use only the label supplied with the Memory Stick™ as a label.
Do not bend, drop, or apply strong shock to the Memory Stick™.
Do not disassemble or modify Memory Sticks™.
Do not let Memory Sticks™ get wet.
Do not use or store Memory Sticks™ in a location subject to:
❑
❑
❑
Extremely high temperatures, such as in a car parked in the sun,
Direct sunlight,
High humidity or near corrosive substances.
❑
Use the storage case supplied with the Memory Stick™.
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
n N
115
Glossary
This section refers to terms used in this manual. These terms and definitions have been compiled to provide
you with a better understanding of your VAIO computer.
Term
Definition
The <F1> key gives you access to the online help of most software.
<F1> key
Ethernet system providing data transfer rates of 10 Mbps (megabits per second) and
100 Mbps. The 100BASE-TX is a very direct derivative of 10BASE-T. Its 100 Mbps speed is
achieved by simply sending the signal 10 times faster.
10BASE-T/100BASE-TX
Short for Advanced Configuration and Power Interface, a power management specification.
ACPI enables the operating system to turn peripherals on and off and to control the amount
of power given to each device attached to the computer. With ACPI, a CD-ROM player can
be turned off by the operating system if it is not in use.
ACPI
A recovery process that enables you to recover any of the applications initially available on
the computer. Performing an application recovery is useful when an individual application
does not run properly or to reinstall a driver when a device does not work properly.
Application recovery
CD-ROM that enables a VAIO computer user to recover all the applications that were
available when the computer was purchased. The CD-ROM is supplied with the computer.
Application recovery CD-ROM
BIOS
An acronym for Basic Input/Output System. The BIOS is a program that enables the computer
to start when you turn it on. It monitors the data stream between the operating system and
the computer’s hardware devices.
CardBus is the commercial name for an advanced PC Card. The CardBus technology allows
computer users to enjoy higher performances as far as data transfer and operating speed are
concerned. See PCMCIA.
CardBus
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
n N
116
Term
Definition
Abbreviation for Compact Disc Read-Only Memory. A high-capacity optical disc, usually
650 MB in size, capable of being read from but not written to.
CD-ROM
Short for Compact Disc-ReWriteable. Compact Disc that can be used to write or rewrite data
to it. A CD-RW can be written to several times, a CD-R can only be written to once.
CD-RW
CPU
The CPU (Central Processing Unit) is the brains of the computer; it processes the instructions
of your system’s programs. The CPUis also known as the processor or microprocessor and can
be found on the motherboard of your computer.
The Direct Current interface to which you connect your computer’s AC adapter.
DC In
An additional device that you can connect to your notebook. The docking station contains
slots for expansion boards , bays for storage devices and ports for additional peripherals
(such as printers or monitors).
Docking station
A driver is software enabling you to use hardware devices. For example, in order for you to
be able to use a printer, you must first install its driver. Many drivers, such as the mouse
driver, come with the operating system.
Driver
Short for Digital Video Disc. A type of read-only CD with a minimum capacity of 4.7 GB
(maximum capacity can reach 17 GB). This high storage power makes it the ideal medium for
storing films.
DVD-ROM
Ethernet
Ethernet is the most widely implemented local area network (LAN) technology. The Ethernet
system called 10BASE-T provides data transfer rates of 10 Mbps (megabits per second). A
more recent version of Ethernet, called 100BASE-T, provides data transfer rates of 100 Mbps.
Gigabit Ethernet supports data rates of 1 gigabit (1,000 megabits) per second.
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
n N
117
Term
EULA
Definition
EULA (End-User Licence Agreement) is the name given to a licence governing the software
on your computer. The EULA can be found in the Read this first section at the beginning
of the software guide or directly on the VAIO desktop.
i.LINK™ is Sony’s version of the IEEE 1394 standard for high-speed digital serial interface.
The standard is regarded in the audio/video and IT industries as the most suitable interface
for connecting computers and digital audio/video devices (such as digital cameras etc.).
i.LINK™
An ISP (Internet Service Provider) is a company which provides you with a user name,
password and telephone number in order to connect to the Internet.
ISP
Cache memory is RAM-like memory that enables quick access to data that has already been
read by the computer. L1 and L2 are levels of cache memory in a computer.
L2 cache memory
LAN
A LAN (Local Area Network) is a group of computers connected together within a limited
geographical area. It enables users to share devices (such as printers) and information using
one processor or server.
Short for Liquid Crystal Display. Flat notebook display technology using liquid crystals (and
light polarisation) to provide sharp, flicker-free images on a screen comprised of millions of
tiny cells. Colour can be produced by two basic techniques. Passive matrix is the less
expensive of the two technologies. The active matrix technology (or TFT) produces better
quality but is also more expensive.
LCD
Short for Light-Emitting Diode. A semiconductor device that lights up when electricity passes
through it.
LED
A lithium-ion battery uses lithium cobalt oxide and carbon as electrodes and ions move from
one electrode to the other during charge and discharge. Lithium-ion batteries are the first
choice for notebooks because of their light weight, high energy density and because they
have no memory effect. In addition they do not use heavy metals like lead, mercury or
cadmium.
Lithium-ion battery
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
n N
118
Term
MAPI
Definition
Short for Messaging Application Program Interface. A Microsoft Windows interface
enabling you to send e-mail messages. It allows e-mail access and distribution among
applications. MAPI-compatible applications include a Send Mail or Send in the File menu of
the application.
The maximum amount of RAM that your computer can contain. Once this amount is
reached, you can no longer add additional RAM to your computer.
maximum RAM
Motherboard
MPEG
The motherboard is the main circuit board inside your computer. It holds the CPU, the BIOS,
the memory and so on.
MPEG or Moving Pictures Experts Group is a standard for audio-visual compression of video
sequences. MPEG achieves high compression rates by storing only the changes from one
frame to another. The decrease in data is generally imperceptible to the human eye.
MPEG-1 was developed for digital storage of video and audio data on CD-ROM. MPEG-2
achieves better image and audio quality and is more targeted to TV broadcasting and DVD.
The operating system is software that manages all the other programs in a computer. It
defines how the computer reads and writes information to its disks (and other hardware).
Windows 2000, Windows Millennium Edition, Windows XP Professional and Windows XP
Home Edition are examples of operating systems found on VAIOs.
Operating system
A partition is a logical division of a computer’s hard disk. A two-partition hard drive would
typically contain C: and D: drives. Partitioning is particularly useful if you run more than one
operating system or to clearly separate your data files from your installed software.
Partition
PBX
A PBX (Private Branch Exchange) is a private telephone network within an enterprise. Under
this system, the calls between the enterprise members are local and the phone numbers are
made up of 3 or 4 digits. Companies generally choose this phone system for internal
communication because it is less expensive than the regular network. The users can still
share a number of outside lines for making calls external to the PBX.
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
n N
119
Term
Definition
A PCMCIA card. The term PC Card is more widely used than PCMCIA. See PCMCIA.
PC Card
PCMCIA
PCMCIA (Personal Computer Memory Card International Association) is the name of the
group that produced the specification for the credit card-sized plug-in boards for laptop
computers. The cards used to be called PCMCIA cards, but as this was rather
unpronounceable, these cards are now termed PC cards. An example of a PC card is a credit
card-sized modem.
A pixel (Picture Element) is a part of your screen. Your screen is made up of thousands of
pixels, enabling you to see colours and pictures on it. The more pixels, the higher the
resolution and the better the image quality.
Pixel
An additional device that you can connect to your notebook. The port replicator contains
ports that enable you to connect additional peripherals (such as a printer or a monitor) to
your VAIO. A port replicator is similar to a docking station, but does not include additional
slots for adding expansion boards or storage devices.
Port replicator
The processor is the brains of the computer; it processes the instructions of your system’s
programs. The processor is also known as the CPU or microprocessor and can be found on
the motherboard (see this word) of your computer.
Processor
The product recovery CD-ROMs include the application recovery CD-ROM and the system
recovery CD-ROM(s)
Product recovery CD-ROM
A type of mouse or keyboard port.
PS/2
PSTN (Public Switched Telephone Network) refers to the plain old telephone service, the
national telecommunication networks implementing voice transmission by using analog
signals.
PSTN
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
n N
120
Term
RAM
Definition
Short for Random Access Memory, the memory used to run programs and store data in
current use. RAM is the fastest kind of memory to read from and write to. Information stored
in RAM is lost when you turn off the computer. The higher the RAM capacity, the faster your
current data can be processed.
The degree of sharpness and clarity of an image. Resolution is expressed in pixels. Frequent
computer screen resolutions are 640 x 480 pixels (VGA resolution; appropriate for a 14-inch
screen), 800 x 600 (appropriate for a 15-inch screen), 1,024 by 768 (appropriate for a 17-inch
screen), and 1,280 by 1,024. LCD displays usually use a higher resolution than a CRT of the
same size.
Resolution
RGB stands for Red, Green, Blue. A cable that requires separate transmission types for the
three colours on the display.
RGB signal cable
SDRAM
Synchronous DRAM is a kind of dynamic random access memory running at a much higher
clock speed than regular memory.
The amount of RAM that is available on your computer when you purchase it.
Standard RAM
System recovery
A recovery process that enables you to recover the hard disk image initially available on the
computer. Performing a system recovery is useful in the event of a serious system crash or if
you want to modify the size of your partitions.
CD-ROM that is supplied with your computer and that enables a VAIO computer user to
recover the hard disk image that was available when the computer was purchased.
System recovery CD-ROM
TFT
Short for Thin Film Transistor. Top-of-the-range notebook display for excellent picture
quality. The TFT technology offers the sharpest resolution for flat displays; each pixel is
supported by one to four transistors.
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
n N
121
Term
UPS
Definition
A UPS (Uninterruptible Power Supply) is a device including a battery that protects your
computer from data loss in the event of a power failure. The battery takes over as soon as
a power interruption is detected. If you are using the computer when the power failure
occurs, you have time to save all unsaved data and to shut down your computer.
USB (Universal Serial Bus) is a hardware interface for attaching devices (such as a keyboard,
mouse, joystick, scanner or printer). You can connect up to 127 devices to a USB port. The
USB standard is Hot Plug and Play.
USB
Short for Video Audio Integrated Operation. Brand name covering Sony's PC products,
peripherals, accessories and software. VAIO-branded items are all designed to make the best
use of Sony's Audio-Video (AV) and Information Technology (IT) skills.
VAIO
WAN
WAN (Wide Area Network) is a computer network connected together and covering a
relatively large geographical area. This is in contrast to LAN, where the network is usually
set up within one building or small geographical area. The largest existing WAN is the
Internet.
Short for Extended Graphic Array, a graphics standard. An XGA board can provide up to
1,024 x 768 pixels and supports up to 65 thousand colours.
XGA
Download from Www.Somanuals.com. All Manuals Search And Download.
|