2-547-453-91(1)
Mini Hi-Fi
Component
System
Operating Instructions
Owner’s Record
The model and serial numbers are located on the rear of the unit. Record the serial
number in the space provided below. Refer to them whenever you call upon your
Sony dealer regarding this product.
Model No.
Serial No.
MHC-LX10000
©2006 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Changing the spectrum analyzer
display ............................................ 25
Adjusting the brightness of the
display ............................................ 25
Viewing information about the disc in
the display ...................................... 26
Listening to audio from a connected
Recording your favorite tracks on a disc
into a tape........................................17
Adjusting the graphic equalizer or
3US
Download from Www.Somanuals.com. All Manuals Search And Download.
Discs that this system cannot
play back
About this manual
This manual mainly explains operations using
the buttons on the unit, but the same operations
can also be performed using the buttons on the
remote having the same or similar names or
symbols.
• CD-ROMs other than those has MP3 audio
tracks that conforms to ISO 9660 Level 1,
Level 2, Joliet in expansion format.
• CD-Rs/CD-RWs other than those recorded in
the following formats:
a)
– audio CD format
Playable discs
You can play back the following discs on this
system. Other discs cannot be played back.
– data CD format with MP3 audio track in the
format of MPEG 1 Audio Layer 3,
MPEG 2 Audio Layer 3 and MPEG 2.5
Audio Layer 3 that conforms to ISO 9660a)
Level 1, Level 2 or Joliet in expansion
format or Multi Sessionb).
• Data part of CD-Extras.
• Data part of Mixed CDs.
• A disc that has a non-standard shape (e.g.,
card, heart).
List of playable discs
Format of
discs
Disc logo
Contents
Audio CDs
Audio
• CD-R and CD-RW discs that have not been
correctly finalized (processing to allow play
back by a normal CD player).
• CD-R and CD-RW discs recorded in multi-
session that have not ended by “closing the
session”.
CD-R/CD-RW
(Audio CDs/
Discs with MP3
audio tracks)
Audio
• A disc recorded in packet write format.
• A disc with paper or stickers on it.
• A disc that has the adhesive, cellophane tape,
or a sticker still left on it.
• Audio side of a DualDisc.
a)
A logical format of files and folders on a CD-ROMs,
defined by ISO (International Organization for
Stardardization).
b)
Multi Session
This is a recording method that enables adding of
data using the Track-At-Once method. Conventional
discs begin at a disc control area called the Lead-in
and end at an area called Lead-out. A Multi Session
disc is a disc having multiple sessions, with each
segment from Lead-in to Lead-out regarded as a
single session.
4US
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on discs
Music discs encoded with
copyright protection
technologies
• This system can play back CD-R/CD-RW
discs edited by the user. However, note that
playback of some discs may not be possible
depending on the recording device used for
recording or the disc condition.
This product is designed to play back discs that
conform to the Compact Disc (CD) standard.
Recently, various music discs encoded with
copyright protection technologies are marketed
by some record companies. Please be aware that
among those discs, there are some that do not
conform to the CD standard and may not be
playable by this product.
• Discs recorded on CD-R/CD-RW drives may
not be played back because of scratches, dirt,
recording condition or the driver’s
characteristics.
Note on DualDiscs
Cautions when playing a disc
that is recorded in Multi
Session
This product is designed to play back discs that
conform to the Compact Disc (CD) standard.
A DualDisc is a two sided disc product which
mates DVD recorded material on one side with
digital audio material on the other side. Please
be aware that the audio side of a DualDisc may
not be played back on this product because these
discs do not conform to the CD standard.
• This system can play back Multi Session discs
when an MP3 audio track is contained in the
first session. Any subsequent MP3 audio
tracks recorded in later sessions can also be
played back.
“DualDisc” is a trademark of the Recording
Industry Association of America (RIAA).
• When you play back Multi Session discs with
different formats for each session, the format
of the first session is recognized as the disc
type. Tracks in the second and subsequent
sessions are played back if they are the same
formats as the first session.
5US
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Hooking up the system
Do the following procedures 1 to 4 to hook up your system using the supplied cords and accessories
AM loop antenna
Surround speaker
(Left)
Surround speaker
(Right)
3
FM lead antenna
3
2
2
4
1
Front speaker (Right)
Unit
Front speaker (Left)
1
1 Connect the front speakers.
2 Connect the surround speakers.
Connect the speaker cords of the front
speakers to the FRONT SPEAKER
terminals as shown below.
Connect the speaker cords of the surround
speakers to the SURR SPEAKER terminals
as shown below.
White
Grey
L
L
FRONT SPEAKER
SURR SPEAKER
R
R
6US
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Connect the FM and AM antennas.
Inserting two R6 (size AA)
batteries into the remote
Set up the AM loop antenna, then connect
it.
e
E
E
e
AM
AM loop antenna
Note
If you do not use the remote for a long period of time,
remove the batteries to avoid possible damage from
battery leakage and corrosion.
Extend the FM lead
antenna horizontally
Tip
With normal use, the batteries should last for about six
months. When the remote no longer operates the
system, replace both batteries with new ones.
4 Connect the power cord to a wall
outlet.
The demonstration appears in the display.
When you press ?/1, the system turns on
and the demonstration automatically ends.
If the supplied adaptor on the plug does not
fit your wall outlet, detach it from the plug
(only for models equipped with an adaptor).
Attaching the speaker pads
Attach the supplied speaker pads to the bottom
of the speakers to stabilize the speakers and
prevent them from slipping.
Note
Install this system so that the power cord can be
unplugged from the wall socket immediately in
the event of trouble.
Notes
• Keep the speaker cords away from the antennas to
prevent noise.
When carrying this unit
• Be sure to connect both left and right surround
speakers.
Do the following procedure to protect the disc
mechanism.
Use buttons on the unit for the operation.
• Be sure to match the color of the speaker terminals on
the unit and the connectors.
• Be sure to connect the speakers securely and
correctly. When connecting speaker cords, insert the
connectors straight into the terminals.
1 Press ?/1 to turn on the system.
2 Press CD.
To connect optional components
See “Hooking up optional components” on page 27.
3 Make sure that all discs are removed
from the unit.
4 Hold down CD, then press ?/1 until
“LOCK” appears in the display.
5 Release ?/1 first, then release CD.
6 Unplug the AC power cord.
7US
Download from Www.Somanuals.com. All Manuals Search And Download.
Positioning the speakers
Setting the clock
Place the front speakers at an angle of 45
degrees from your listening position.
Use buttons on the remote for the operation.
1
2
Press ?/1 to turn on the system.
Unit
Press CLOCK/TIMER SET.
Front
speaker
(L)
Front
speaker
(R)
“CLOCK” appears in the display. Then, the
hour indication flashes in the display.
3
4
Press –. or >+ repeatedly to set
the hour.
45°
Press ENTER.
The minute indication flashes in the
display.
Surround speaker
(R)
Surround speaker
(L)
5
6
Press –. or >+ repeatedly to set
the minute.
Press ENTER.
The clock starts functioning.
To adjust the clock
1 Press CLOCK/TIMER SET.
“SET” appears in the display, then “PLAY
SET?” flashes in the display.
2 Press –. or >+ repeatedly to select
“CLOCK SET?”, then press ENTER.
The hour indication flashes in the display.
3 Do the same procedures as step 3 to 6
above.
Notes
• The clock settings are canceled when you disconnect
the power cord or if a power failure occurs.
• You cannot set the clock in Power Saving Mode
8US
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a disc
— Normal Play/Shuffle Play
Disc – Playback
Loading a disc
This system lets you play back audio CDs and
discs with MP3 audio tracks in different play
modes.
1
Press Z OPEN/CLOSE.
The disc tray slides out.
When playing an audio CD
2
Load a disc with the label side facing
up on the disc tray.
Elapsed
playing time
Disc tray
number
Track number
When youplay
back a 8 cm
disc such as
CD single,
place it on the
inner circle of
the tray
Disc playing Disc presence
indicator indicator
To load additional discs, press
EX-CHANGE/DISC SKIP to rotate the
disc tray.
When playing an MP3 audio track
Elapsed
playing time
Disc tray
number
3
Press Z OPEN/CLOSE to close the disc
tray.
Track number
Notes
• Do not push the disc tray when closing it as this may
cause malfunction. Press Z OPEN/CLOSE to close
the disc tray.
• Do not use a disc with tape, seals or paste on it as this
may cause malfunction.
Disc playing Disc presence
indicator indicator
continued
9US
Download from Www.Somanuals.com. All Manuals Search And Download.
1
2
Press CD.
Other operations
To
Do this
When playback is stopped, press PLAY
MODE on the remote repeatedly until
the indication of the play mode you
want lights up in the display.
Stop playback
Press x.
Pause playback Press X. Press X again to resume
playback.
Select
To play back
Select a track
Turn . > clockwise or
counterclockwise (or press –.
or >+ on the remote
repeatedly).
ALL DISCS
(Normal Play)
The tracks on all discs in the
disc tray continuously.
1DISC
(Normal Play)
The tracks on the disc you
have selected in original
order.
Select an album Turn and hold ALBUM +/–
of MP3 audio
tracks
clockwise or counterclockwise
and release it at the album you
want (or press ALBUM +/– on the
remote repeatedly).
ALBM
(Normal Play)
The MP3 audio tracks in the
album on the disc you have
selected in original order.
For discs other than discs
with MP3 audio tracks,
“ALBM” play mode
Find a point in a For audio CD, turn and hold
1)
track
m M clockwise or
counterclockwise and release it at
the point you want (or press m
or M repeatedly on the remote).
For MP3 audio track, press m or
M repeatedly on the remote.
performs the same operation
as “1DISC” play mode.
ALL DISCS
SHUF
(Shuffle Play)
The tracks on all discs in
random order.
Select a disc
Press one of the DISC 1 ~ 3
when playback is buttons or EX-CHANGE/DISC
stopped
1DISC SHUF
(Shuffle Play)
The tracks on the disc you
have selected in random
order.
SKIP (or DISC SKIP on the
remote).
Switch to CD
function from
another source
and start
Press one of the DISC 1 ~ 3
buttons (Automatic Source
Selection).
ALBM SHUF
(Shuffle Play)
The MP3 audio tracks in the
album on the disc you have
selected in random order.
For discs other than discs
with MP3 audio tracks,
“ALBM SHUF” play mode
performs the same operation
as “1DISC SHUF” play
mode.
playback
automatically
when there is a
disc
Exchange other Press EX-CHANGE/DISC SKIP.
discs while
playing
PROGRAM
The tracks on all discs in the
(Program Play) order you want them to be
played back (see “Creating
Remove a disc
Press Z OPEN/CLOSE.
1) The elapsed playing time may not be displayed
correctly depending on the MP3 audio tracks.
3
Press nN (or N on the remote).
10US
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
• You cannot change the play mode during playback.
• The following discs take a longer time to start
playback.
Playing repeatedly
— Repeat Play
– a disc recorded with complicated tree structure.
– a disc recorded in Multi Session.
You can play back all the tracks or a single track
on a disc repeatedly.
– a disc to which data can be added (non-finalized
disc).
Press REPEAT on the remote repeatedly
during playback until “REPEAT” or
“REPEAT1” lights up in the display.
• When the disc is loaded, the system reads all the
tracks on that disc. If there are many albums or non-
MP3 audio tracks on the disc, it may take a longer
time for playback to begin or for the next MP3 audio
tracks to start playback.
REPEAT: All the tracks on the disc(s), or all the
tracks in the album* are played back repeatedly
up to five times.
REPEAT1: A single track is played back
repeatedly until “REPEAT1” is cancelled.
• You are recommended not to save other types of
tracks or unnecessary albums on a disc that has MP3
audio tracks.
• Attempting to play back non-MP3 format files that
have the extension “.MP3” may result in noise or
malfunction.
* When “ALBM” or “ALBM SHUF” is selected for
MP3 audio tracks.
• The system can play back to a depth of 8 folders
only.
To cancel Repeat Play
Press REPEAT repeatedly until both
“REPEAT” and “REPEAT1” disappear from
the display.
• When naming the MP3 audio tracks, be sure to add
the file extension “.MP3” to the file name.
• An album that does not include an MP3 audio track
is skipped.
Note
• If you save up the extension “.MP3” to a track other
than MP3 audio tracks, the system cannot recognize
the track properly and will generate a random noise
which could damage your speaker.
You cannot select “REPEAT” and “ALL DISCS
SHUF” at the same time.
Tip
You can change the Repeat Play setting when the
playback is stopped.
• The maximum number of albums on a disc which can
be recognize by this system is 150 (including root
album).
• The maximum number of MP3 audio tracks and
albums on a disc which can be recognize by this
system is 300.
Creating your own
program
• Depending on the encoding/writing software,
recording device, or the recording media used at the
time an MP3 audio track is recorded, you may
encounter problems such as cannot play back, sound
interruptions and noise.
— Program Play
You can make a program of up to 25 steps from
all the discs in the order you want to play back.
You can synchro record the programmed tracks
onto a tape (page 17).
Tips
• When you press CD or one of the DISC 1 ~ 3 buttons
to switch to “CD” function from “TUNER” function,
you may require a longer time to access the disc. In
the case, set the CD power manage function to “CD
1
2
Press CD.
When playback is stopped, press PLAY
MODE on the remote repeatedly until
“PROGRAM” lights up in the display.
• If you press CD while the system is turned off, the
system turns on automatically and “CD” is selected
as the function.
• You can also press FUNCTION on the remote
repeatedly to select “CD”.
• During Shuffle Play, some tracks may be played
back repeatedly.
continued
11US
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Press one of DISC 1 ~ 3 buttons or
EX-CHANGE/DISC SKIP (or DISC SKIP
on the remote) to select a disc.
6
To program additional discs or tracks.
To program
Repeat steps
Other discs
3 and 5
To program all the tracks on a disc at once,
proceed to step 5 while “AL” appears in the
display.
Other tracks on the 4 and 5
same disc
Other tracks on
other discs
3 to 5
To program all the MP3 audio tracks on
an album at once, turn and hold
ALBUM +/– clockwise or
counterclockwise and release it at the
album you want (or press ALBUM +/– on
the remote repeatedly until the album you
want appears in the display), then proceed
to step 5.
7
Press nN (or N on the remote).
Program Play starts.
Other operations
To
Do this
Cancel Program
Play
When playback is stopped, press
PLAY MODE on the remote
repeatedly until “PROGRAM”
disappear from the display.
Turn . > clockwise or
counterclockwise (or press –. or
>+ on the remote repeatedly) until
the track number you want appears in
the display.
Clear a track from Press CLEAR on the remote
the end of program when playback is stopped.
The total playing time flashes in the display.
When programming an MP3 audio track,
turn and hold ALBUM +/– clockwise or
counterclockwise and release it at the album
you want (or press ALBUM +/– on the
remote repeatedly until the album you want
appears in the display), then turn . >
clockwise or counterclockwise (or press
–. or >+ on the remote repeatedly)
until the track number you want appears in
the display.
Tips
• The program you made remains in the system’s
memory even after it has been played back. Press
nN (or N on the remote) to play back the same
program again.
• If “--.--” appears instead of the total playing time
during programming, this means:
– you have programmed a track number which
exceeds 20.
– the total playing time has exceeded 100 minutes.
– you have programmed an MP3 audio track.
Total playing time
Disc tray Track
(including selected
number
number
track)
5
Press ENTER.
The track(s) is(are) programmed.
The program step number appears in the
display.
12US
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
Press TUNER MEMORY on the remote.
A preset number flashes in the display.
The stations are stored from preset
number 1.
Tuner
Presetting radio stations
Preset number
You can preset up to 20 FM stations and 10 AM
stations. You can then tune in any of those
stations simply by selecting the corresponding
preset number.
Automatic tuning preset
You can automatically tune in all of the stations
that can be received in your area and then store
the frequency of your favourite stations.
Turn TUNING +/– clockwise or
counterclockwise (or press –. or
>+ on the remote repeatedly) to
select the preset number you want.
1
2
Press TUNER/BAND repeatedly to
select “FM” or “AM”.
6
7
Press ENTER.
“Complete!” appears in the display. The
station is stored.
Press TUNING MODE on the remote
repeatedly until “AUTO” lights up in
the display.
Repeat steps 1 to 6 to store other
stations.
3
Turn TUNING +/– clockwise or
counterclockwise (or press –. or
>+ on the remote).
Manual tuning preset
The frequency changes as the system scans
for a station. Scanning stops automatically
when a station is tuned in. “TUNED” lights
up in the display. When a FM stereo
program is tuned in, “STEREO” lights up in
the display.
You can manually tune in and store the
frequency of your favourite stations.
1
2
Press TUNER/BAND repeatedly to
select “FM” or “AM”.
Press TUNING MODE on the remote
repeatedly until “MANUAL” lights up in
the display.
3
Turn TUNING +/– clockwise or
counterclockwise (or press –. or
>+ on the remote repeatedly) to tune
in the station you want.
If “TUNED” does not lights up and the
scanning does not stop
Set the frequency of the radio station you
want as described in steps 2 and 3 of
continued
13US
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
Press TUNER MEMORY on the remote.
To set to “CD POWER ON”
A preset number flashes in the display.
The stations are stored from preset
number 1.
Repeat the procedure above and “CD POWER
ON” appears in the display.
Notes
Preset number
• When “CD POWER OFF” is selected, disc access
time is increased.
• You cannot change the CD power manage function
To change the AM tuning interval
Use buttons on the unit for the operation.
The factory settings for AM tuning interval is
9 kHz (or 10 kHz for some areas). To change the
AM tuning interval, select any AM station first,
then turn off the system. While holding down
ENTER, press ?/1. The system turns on
automatically and “AM 10k STEP” or
“AM 9k STEP” appears in the display. When
you change the interval, all the AM preset
stations are erased. To reset the interval, repeat
the same procedure.
Turn TUNING +/– clockwise or
counterclockwise (or press –. or
>+ on the remote repeatedly) to
select the preset number you want.
6
7
Press ENTER.
“Complete!” appears in the display. The
station is stored.
Repeat steps 1 to 6 to store other
stations.
Note
You cannot change the AM tuning interval in the
Other operations
Tips
To
Do this
• The preset stations are retained for half a day even if
you unplug the power cord or if a power failure
occurs.
Tune in a station
Follow the procedure described
• If you press TUNER/BAND while the system is
turned off, the system turns on automatically and
“TUNER” is selected as the function.
• You can also press FUNCTION on the remote
repeatedly to select “TUNER”.
Stop scanning
during automatic
tuning
Press x.
Cancel presetting
Press TUNER MEMORY on
the remote.
To improve tuner reception
When tuner reception is poor, set the CD power
manage function to “CD POWER OFF”. The
default setting is “CD POWER ON”.
Use buttons on the unit for the operation.
1 Press CD.
2 Press ?/1 to turn off the system.
3 Press ?/1 while holding x.
The system turns on automatically. “CD
POWER OFF” appears in the display.
14US
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to a non-preset
radio station
Listening to the radio
You can listen to a radio station either by
selecting a preset station, or by manually tuning
in the station.
— Manual Tuning
1
2
Press TUNER/BAND repeatedly to
select “FM” or “AM”.
Listening to a preset station
Press TUNING MODE on the remote
repeatedly until “MANUAL” lights up in
the display.
— Preset Tuning
3
Turn TUNING +/– clockwise or
counterclockwise (or press –. or
>+ on the remote repeatedly) to tune
in the station you want.
Before tuning to preset stations, be sure to preset
1
2
Press TUNER/BAND repeatedly to
select “FM” or “AM”.
Tips
• When an FM stereo program has static noise, press
FM MODE on the remote repeatedly until “MONO”
lights up in the display. There will be no stereo effect,
but the reception will improve.
Press TUNING MODE on the remote
repeatedly until “PRESET” lights up in
the display.
• To record the radio programs, see “Recording on a
3
Turn TUNING +/– clockwise or
counterclockwise (or press –. or
>+ on the remote repeatedly) to
select the preset station you want.
• You can also press FUNCTION on the remote
repeatedly to select “TUNER”.
• To improve broadcast reception, adjust the supplied
antennas, or connect an external antenna.
Preset number
Frequency
15US
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape presence indicator
Tape – Playback
Loading a tape
1
Push b (Deck A) or B (Deck B) on the
selected deck.
Front side Reverse side
indicator
indicator
*1
*2
Only for the tape in Deck B.
Playback stops automatically after repeating
the sequence for five times.
Relay Play follows this cyclic sequence up to
five times, then stops:
2
3
Load a tape into Deck A or B.
Deck A (front side) t Deck B (front side)
t Deck B (reverse side)
With the side
you want to
play back or
record facing
forward
*3
You can only play back front side of the tape in
Deck A.
Other operations
To
Do this
Stop playback
Press x.
Pause playback Press X. Press X again to resume
Push the center of the tape lid to close
the deck.
playback.
Fast-forward or Turn m M clockwise or
rewind
counterclockwise (or press m or
M on the remote). To back to
normal playback, press nN
(or N on the remote).
Playing a tape
You can use TYPE I (normal) tape.
Remove a tape
Push b (Deck A) or B (Deck B)
1
2
Load a tape.
when playback is stopped.
Press TAPE A/B (or TAPE on the
remote) repeatedly until “TAPE A” or
“TAPE B” appears in the display.
Note
Do not push b(Deck A) or B(Deck B) while playing
a tape, otherwise the tape could be damaged.
3
Press DIRECTION repeatedly to select
“g” to play back one side, “j”*1 to
play back both sides or “RELAY”*2
(Relay Play) to play back both decks in
succession.
Tips
• When a tape is inserted, corresponding presence
indicator lights up in the display.
• If you press TAPE A/B (or TAPE on the remote)
while the system is turned off, the system turns on
automatically and “TAPE A” or “TAPE B” is
selected as the function.
4
Press nN (or N on the remote).
The tape starts playing.
Press nN(or Non the remote) again to
• If you press nN (or N on the remote) during
“TAPE A” function and there is no tape in Deck A,
the system automatically switches to “TAPE B”
function when there is a tape in Deck B. Then,
playback will start and vice versa.
*3
play back the reverse side
.
• You can also press FUNCTION on the remote
repeatedly to select “TAPE A” or “TAPE B”.
16US
Download from Www.Somanuals.com. All Manuals Search And Download.
To record a disc by specifying
track order
Tape – Recording
— Program Edit
Recording your favorite
tracks on a disc into a
tape
You can record tracks on all the discs in the
order you want using Program Play. Between
steps 2 and step 3 of “CD Synchro Recording”
program” (page 11). When programming, make
sure the playing times for each side do not
exceed the length of one side of the tape.
— CD Synchro Recording
You can record a whole disc into a tape.
You can use TYPE I (normal) tape. The
recording level is adjusted automatically.
Note
You cannot listen to other sources while recording.
Tips
1
2
Load a recordable tape into Deck B.
• For recording from the reverse side:
After step 1, press TAPE A/B (or TAPE on the
remote) repeatedly until “TAPE B” appears in the
display. Press nN (or N on the remote)
repeatedly until TAPE B reverse side indicator “b”
lights up in the display to start playback of the
reverse side. Press x at the point you want to start
recording.
Press CD and load a disc you want to
record.
When you want to record an album of MP3
audio tracks, press PLAY MODE on the
remote repeatedly until “ALBM” lights up
in the display. Then turn and hold
ALBUM +/– clockwise or
counterclockwise and release it at the album
you want (or press ALBUM +/– on the
remote repeatedly).
• When you record on both sides, be sure to start from
the front side. If you start from the reverse side,
recording stops at the end of the reverse side.
3
Press CD SYNC.
“SYNC” lights up in the display.
“REC” flashes in the display.
Deck B standby for recording.
4
5
Press DIRECTION repeatedly to select
“g” to record on one side or “j”
(or “RELAY”) to record on both sides.
Press REC PAUSE/START.
“REC” lights up in the display.
Recording starts.
To stop recording
Press x.
17US
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips
• When you record on both sides, be sure to start from
the front side. If you start from the reverse side,
recording stops at the end of the reverse side.
• For recording from the radio:
Recording on a tape
manually
— Manual Recording
If noise is heard while recording from the radio,
move the respective antenna to reduce the noise.
• For recording from a disc to a tape manually:
You can turn . > clockwise or
counterclockwise (or press –. or >+ on the
remote repeatedly) to select tracks during recording
pause (after step 4 and before step 6 of “Recording on
a tape manually” ).
You can record just the portions you like from a
disc, tape or radio program on a tape.
You can also record from connected
1
2
Load a recordable tape into Deck B.
• For recording from the reverse side:
After step 1, press TAPE A/B (or TAPE on the
remote) repeatedly until “TAPE B” appears in the
display. Press nN (or N on the remote)
repeatedly until TAPE B reverse side indicator “b”
lights up in the display to start playback of the
reverse side. Press x at the point you want to start
recording.
Press CD, TAPE A/B, TUNER/BAND, TV
or VIDEO/MD (or FUNCTION on the
remote repeatedly) to select the source
you want to record.
3
4
Load the disc, tape or tune to the
station you want to record. To record
from the connected component,
connect the external audio sources.
• For recording an album of MP3 audio tracks:
Press PLAY MODE on the remote repeatedly until
“ALBM” lights up in the display. Then turn and hold
ALBUM +/– clockwise or counterclockwise and
release it at the album you want (or press
ALBUM +/– on the remote repeatedly) after step 4
and before step 6 of “Recording to a tape manually”.
• When recording from the tape:
Press REC PAUSE/START.
“REC” flashes in the display.
Deck B standby for recording.
5
6
Press DIRECTION repeatedly to select
“g” to record on one side or “j”
(or “RELAY”) to record on both sides.
If you set the direction to “j” (or “RELAY”) and
the tapes you use have different lengths, the tapes in
each deck reverses independently.
Press REC PAUSE/START.
“REC” lights up in the display.
Recording starts.
7
Start playing the source to be
recorded.
To stop recording
Press x.
Note
You cannot listen to other sources while recording.
18US
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the graphic
equalizer or selecting the
surround effect
Sound Adjustment
Adjusting the sound
You can reinforce the bass and create a more
powerful sound.
You can adjust the sound by raising or lowering
the level of specific frequency band, then store
up to three user equalizer setting in the memory.
Press GROOVE repeatedly.
Each time you press the button, the display
changes cyclically as follows:
1
2
Press EQ BAND repeatedly to select a
frequency band or surround effect.
GROOVE ON* t GROOVE OFF
Turn OPERATION DIAL clockwise or
counterclockwise to adjust the level or
select surround effect you want.
* The volume switches to power mode and the
equalizer curve changes.
Tips
Frequency level
Frequency band
• The default setting is “GROOVE ON”.
• When “GROOVE ON” is selected,
“GROOVE” lights up in the display.
Selecting the preset
effect
3
4
Repeat step 1 and 2 to adjust the level
of other frequency bands.
Turn OPERATION DIAL clockwise or
counterclockwise (or press EQ on the
remote repeatedly) to select the preset
effect you want.
Press ENTER.
A user equalizer number flashes in the
display.
Preset effect options
Effect
Category
5
6
Turn OPERATION DIAL clockwise or
counterclockwise to select a user
equalizer number (1~3) you want to
store the equalizer setting.
ROCK
POP
JAZZ
DANCE
SOUL
TECHNO
HIP HOP
REGGAE
SAMBA
CLASSICAL
Standard music sources
Press ENTER.
This setting is automatically stored as the
user equalizer setting you selected in step 5.
The previous setting stored at this memory
location is erased and replaced by the new
setting.
FLAT
Original music source
User equalizer setting
Tip
USER EQ 1
USER EQ 2
USER EQ 3
If you do not want to store the equalizer setting, select
“EXIT?” in step 5.
To cancel the preset effect
Turn OPERATION DIAL clockwise or
counterclockwise until “FLAT” appears in the
display.
continued
19US
Download from Www.Somanuals.com. All Manuals Search And Download.
Other operations
Selecting the sound
system
You can enjoy different sounds by selecting the
sound mode you want.
To
Do this
Call up a user
Turn OPERATION DIAL
equalizer setting clockwise or counterclockwise
until the user equalizer setting
number you want appears in the
display.
Press SURR SPEAKER MODE repeatedly to
select the sound mode you want.
Notes
• When you select certain preset effects, the surround
effect may be canceled.
Each time you press the button, the display
changes cyclically as follows:
LINK1) t MATRIX SURR2)
• When the surround effect is selected,
“SURROUND” lights up in the display.
1)
LINK: Reproduces the same sound with different
output levels.
Selecting the MP3
Booster effect
2)
MATRIX SURR:
Reproduces a wide range of sound that can actually
sense the size of the room.
You can improve the sound quality of MP3
audio tracks during playback.
Flashing sound effect
— SOUND FLASH
Press MP3 BOOSTER repeatedly.
Each time you press the button, the display
changes cyclically as follows:
BOOSTER ON t BOOSTER OFF
With the sound flash function, you can flash the
sound output. The sound cuts off periodically.
Hold down SOUND FLASH during
playback.
Tips
• The default setting is “BOOSTER ON”.
• When “BOOSTER ON” is selected, “MP3
BOOSTER” lights up in the display.
• MP3 Booster setting only can be changed when disc
with MP3 audio tracks is selected during “CD”
function.
The flashing effect is activated.
To cancel the flashing effect
Release SOUND FLASH.
To change the sound flash speed
Hold down SOUND FLASH and turn
OPERATION DIAL clockwise or
counterclockwise to change the sound flash
speed (1 ~ 20).
Tip
The power illuminator will synchronize with the
selected SOUND FLASH effect.
20US
Download from Www.Somanuals.com. All Manuals Search And Download.
Singing along
Timer
You can sing along with any stereo CD or tape.
You need to connect an optional microphone.
Falling asleep to music
— Sleep Timer
1
2
3
4
Turn MIC LEVEL to “MIN” to turn down
the microphone volume.
You can set the system to turn off at a preset
time, so that you can fall asleep to music.
Use buttons on the remote for the operation.
Connect an optional microphone to the
MIC 1 or MIC 2 jack.
Start playing the music and adjust the
volume.
Press SLEEP repeatedly.
Each time you press the button, the minute
display (the turn-off time) changes cyclically as
follows:
AUTO* t 90min t 80min t 70min
t … t 10min t OFF
Start singing along with the music and
adjust the microphone volume by
turning MIC LEVEL.
Other operations
* The system automatically turns off in 100 minutes or
after the current disc or tape finishes playing.
To
Do this
Adjust the microphone Turn ECHO LEVEL to
echo
adjust the echo effect. To
cancel the echo effect, turn
ECHO LEVEL to “MIN”.
Other operations
To
Do this
Check the
Press SLEEP once.
remaining time**
Tips
Change the time Press SLEEP repeatedly to select
to turn off the time you want.
Cancel the Sleep Press SLEEP repeatedly until
• You can mix and record sound from microphone
after step 2. To record the sound, see “Recording on
press x.
Timer
“SLEEP OFF” appears in the
display.
• If acoustic feedback (howling) occurs, move the
microphone away from the speakers or change the
direction of the microphone.
**You cannot check the remaining time if you select
“AUTO”.
• If you want to record your voice through the
microphone only, you can do so by selecting the
“CD” function and not playing a disc.
Notes
• During CD Synchro Recording, do not set the Sleep
Timer to “AUTO”.
• When high level sound signals are input, the system
automatically adjusts the recording level to prevent
distortion of the recorded sound signal (Auto Level
Control function).
• When the Sleep Timer is activated, “SLEEP” lights
up in the display.
Tip
You can use the Sleep Timer, even if you have not set
the clock.
21US
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Press –. or >+ repeatedly (or
turn .> on the unit clockwise or
counterclockwise) until the music
source you want appears in the
display.
Waking up to music
— Play Timer
You can wake up to music at a preset time. Make
sure you have set the clock (see “Setting the
Each time you press the button, the display
changes as follows:
t
y
T
TUNER
CD PLAY
Use buttons on the remote for the operation.
t
T
TAPE PLAY
1
Prepare the music source you want to
play back.
8
9
Press ENTER.
• Disc: Load a disc. To start from a specific
track, make a program (see “Creating
• Tape: Load a tape with the side you want
to play back facing forward.
• Radio: Tune in the preset station you
The type of timer (“PLAY TIMER”),
followed by the start time, the stop time and
the music source appears in the display.
Press ?/1 to turn off the system.
Other operations
To
Do this
Check
the setting
1 Press CLOCK/TIMER SELECT.
“SELECT” appears in the display.
2 Press –. or >+ repeatedly
(or turn . > on the unit
clockwise or counterclockwise) to
select “PLAY SELECT?”, then
press ENTER.
2
3
Press VOLUME +/– to adjust the
volume.
Press CLOCK/TIMER SET.
“SET” appears in the display, then “PLAY
SET?” flashes in the display.
4
5
Press ENTER.
Change
the setting
Start from step 1.
“ON” appears and the hour indication
flashes in the display.
Cancel
the timer
1 Press CLOCK/TIMER SELECT.
“SELECT” appears in the display.
2 Press –. or >+ repeatedly
(or turn . > on the unit
clockwise or counterclockwise) to
select “TIMER OFF?”, then press
ENTER.
Set the time to start playback.
Press –. or >+ repeatedly (or turn
.> on the unit clockwise or
counterclockwise) to set the hour, then
press ENTER.
The minute indication flashes in the
display.
Press –. or >+ repeatedly (or turn
.> on the unit clockwise or
counterclockwise) to set the minute, then
press ENTER.
Notes
• You cannot select the Play Timer and Timer
Recording at the same time.
• If you use the Play Timer and the Sleep Timer at the
same time, the Sleep Timer has priority.
• The Play Timer will not be activated if the system is
turned on.
6
Set the time to stop playback following
the same procedure as step 5.
Tips
• The system turns on 15 seconds before the preset
time.
• When the Play Timer is selected, “PLAY” lights up
in the display.
22US
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Press DIRECTION repeatedly on the
unit to select “g” to record on one
side or “j” (or “RELAY”) to record
on both sides.
Timer recording radio
programs
For recoding from the reverse side, press
TAPE (or TAPE A/B on the unit)
You can record a preset radio station from a
specified time.
To make a timer recording, you must first preset
the radio station (see “Presetting radio stations”
repeatedly until “TAPE B” appears in the
display. Then, press N (or nN on the
unit) repeatedly until TAPE B reverse side
indicator “b” lights up in the display to start
playback of reverse side. Press x at the
point where you want to start recording.
When you record on both sides, be sure to
start from the front side. If you start from
the reverse side, recording stops at the end
of the reverse side.
Use buttons on the remote for the operation.
1
Tune in the preset radio station
2
Press CLOCK/TIMER SET.
8
Press ?/1 to turn off the system.
“SET” appears in the display, then “PLAY
SET?” flashes in the display.
Other operations
3
4
Press –. or >+ repeatedly
(or turn .> on the unit clockwise
or counterclockwise) to select “REC
SET?”, then press ENTER.
To
Do this
Check
the setting
1 Press CLOCK/TIMER SELECT.
“SELECT” appears in the display.
2 Press –. or >+ repeatedly
(or turn . > on the unit
clockwise or counterclockwise) to
select “REC SELECT?”, then
press ENTER.
“ON” appears and the hour indication
flashes in the display.
Set the time to start recording.
Press –. or >+ repeatedly (or turn
.> on the unit clockwise or
counterclockwise) to set the hour, then
press ENTER.
The minute indication start flashes in the
display.
Change
the setting
Start from step 1.
Cancel
the timer
1 Press CLOCK/TIMER SELECT.
“SELECT” appears in the display.
2 Press –. or >+ repeatedly
(or turn . > on the unit
clockwise or counterclockwise) to
select “TIMER OFF?”, then press
ENTER.
Press –. or >+ repeatedly (or turn
.> on the unit clockwise or
counterclockwise) to set the minute, then
press ENTER.
5
6
Set the time to stop recording following
the same procedure as step 4.
The type of timer (“REC”), followed by
the start time, the stop time and the preset
radio station to be recorded (e.g., “TUNER
FM 5”) appears in the display.
Load a recordable tape into Deck B.
23US
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
• You cannot select the Play Timer and Timer
Recording at the same time.
Display
• If you use the Timer Recording and the Sleep Timer
at the same time, the Sleep Timer has priority.
• The Timer Recording will not be activated if the
system is turned on.
Turning off the display
— Power Saving Mode
• The volume is reduced to minimum during Timer
Recording.
The demonstration display and the clock display
can be turned off to minimize the amount of
power consumed during standby mode (Power
Saving Mode).
• Do not operate the system from the time the system
turns on until the recording starts (about 15 seconds
before the preset time).
Tips
Press DISPLAY repeatedly while the
system is turned off until the
• The system turns on 15 seconds before the preset
time.
demonstration display and the clock
display disappears from the display.
• When the Timer Recording is selected, “REC” lights
up in the display.
To cancel Power Saving Mode
Press DISPLAY repeatedly while the system is
turned off. Each time you press the button, the
display changes cyclically as follows:
Demonstration1) t Clock2)3) t No display
(Power Saving Mode)
1)
The display changes and the indicators flashes even
when the system is turned off.
2)
“--.--” appears in the display if you have not set the
clock.
3)
The clock display automatically turns to power save
mode after 8 seconds.
Notes
• You cannot do the following operations during
Power Saving Mode:
– Changing the AM tuning interval (page 14)
– Turning on the system by pressing the function
buttons (CD, TAPE A/B, TUNER/BAND, TV or
VIDEO/MD)
– Changing CD power manage setting (page 14)
Tips
• The timer continues to operate in Power Saving
Mode.
• ?/1 indicator lights up in red color even in the
Power Saving Mode.
24US
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the spectrum
analyzer display
Changing the power
illuminator
1
Press AMP MENU repeatedly to select
“SPECTRUM”.
Press ILLUMINATION repeatedly to select
the power illuminator you want when the
system is turned on.
The last selected spectrum setting appears
in the display.
Each time you press the button, the power
illuminator changes cyclically as follows:
2
Turn OPERATION DIAL clockwise or
counterclockwise to select the setting
you want.
PATTERN 1 t PATTERN 2 t
PATTERN 3 t PATTERN 4 t
PATTERN OFF
The display changes as follows:
Notes
T
t
SPECTRUM 1
SPECTRUM 2
• When you turn MASTER VOLUME (or press
VOLUME +/– on the remote), power illuminator
shows the current volume level.
Y
Y
SPECTRUM OFF
SPECTRUM 3
R
R
t
SPECTRUM 4
T
• During the demonstration display, you can turn on or
off power illuminator by pressing ILLUMINATION.
3
Press ENTER.
Adjusting the brightness
of the display
1
Press AMP MENU repeatedly to select
“DIMMER”.
The last selected dimmer setting appears in
the display.
2
3
Turn OPERATION DIAL clockwise or
counterclockwise to select the setting
you want.
The display changes as follows:
t
y
T
DIMMER OFF
DIMMER 1
t
T
DIMMER 2*
* DIMMER 2 is the darkest.
Press ENTER.
25US
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking the total playing
time and titles
Viewing information
about the disc in the
display
Press DISPLAY repeatedly when playback
is stopped.
Each time you press the button, the display
changes cyclically as follows:
You can check the elapsed playing time and
remaining time of the current track or current
disc.
x When the play mode is other than
“PROGRAM”
When a CD-TEXT disc or a disc with MP3
audio tracks is loaded, you can also check the
information recorded on disc, such as the titles.
When the system detects CD-TEXT discs,
“CD TEXT” lights up in the display.
Total number of tracks1) or albums2) or the total
playing time3) t Title of current disc4) or
current album1) t Clock display5) (for 8
seconds) t Effect status (for 8 seconds)
1)
For discs with MP3 audio tracks in “ALBM” and
“ALBM SHUF” modes.
2)
Checking the elapsed playing
time, remaining time and
titles
For discs with MP3 audio tracks in play modes other
than “ALBM” and “ALBM SHUF”.
3)
For audio CDs.
4)
For discs with MP3 audio tracks in play modes other
Press DISPLAY repeatedly during
playback.
than “ALBM”, “ALBM SHUF” and CD-TEXT
discs.
5)
“--.--” appears in the display if you have not set the
clock.
Each time you press the button, the display
changes cyclically as follows:
Elapsed playing time of the current track t
Remaining time of the current track1) t
Remaining time of the current disc2) t Title of
the current track3) t Title of the current album
(for a few seconds)4) t Clock display5) (for 8
seconds) t Effect status (for 8 seconds)
x When the play mode is “PROGRAM”
The last track number of the program and the
total playing time1) t Total number of
programmed tracks (for 8 seconds)2) t Title of
current disc3) t Clock display4) (for 8 seconds)
t Effect status (for 8 seconds)
1)
1)
“--.--” appears while an MP3 audio track is played
“--.--” appears in the following cases:
back.
– When the audio CD contains 21 tracks or more,
and the track number which exceeds 20 is
selected.
– When the total program exceeds 100 minutes.
– When the program list contains MP3 audio
tracks.
2)
“--.--” appears in the following cases:
– while an MP3 audio track is played back.
– All play modes except “1DISC” or “ALBM”.
Only for CD-TEXT discs and a discs with MP3
3)
audio tracks.
2)
“NO STEP” appears in the display if there is no
program.
When the CD-TEXT disc contains more than 20
tracks, the title of current track is not displayed from
track 21 onwards.
3)
Only for CD-TEXT discs and discs with MP3 audio
tracks.
4)
Only for discs with MP3 audio tracks.
4)
5)
“--.--” appears in the display if you have not set the
“--.--” appears in the display if you have not set the
clock.
clock.
Note
Some characters may not be displayed for track title,
album title or disc title.
26US
Download from Www.Somanuals.com. All Manuals Search And Download.
Optional Components
Hooking up optional components
To enhance your system, you can connect optional components. Refer to the operating instructions
provided with each component.
From the audio output
jacks of the TV
TV
D-LIGHT SYNC
controller (DLS-1)
VCR, MD deck or
DVD player
From the audio output
jacks of the connected
component
A
TV (AUDIO IN) L/R jacks
C D-LIGHT SYNC OUT jack
Use the D-LIGHT SYNC controller to connect
to this jack. You need to connect the D-LIGHT
SYNC controller to the lighting device* (not
supplied). The lighting device will react
according to control signals transmitted by the
D-LIGHT SYNC controller upon receiving
music source from the system. For details on the
use of D-LIGHT SYNC controller and lighting
device, refer to the respective operating
Use audio cords (not supplied) to connect the
audio output jacks of a TV to these jacks. You
can then output audio signal through this system.
B VIDEO/MD (AUDIO IN) L/R
jacks
Use audio cords (not supplied) to connect the
audio output jacks of the optional component
(such as VCR or MD deck) to these jacks. You
can then output audio through this system.
instructions supplied with the respective device.
D-LIGHT SYNC
controller cord
* Refer to the D-LIGHT SYNC controller
operating instruction for the recommended
lighting device.
Note
The lighting effect may be different depending on the
connected lighting device or the type of music being
played back.
27US
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to audio from a
connected component
Connecting external
antennas
Connect an external antenna to improve the
reception.
Listening to a connected VCR,
MD deck or DVD player
FM antenna
1
Connect the audio cords.
Connect an optional FM external antenna. You
can also use the TV antenna instead.
2
Press VIDEO/MD.
FM 75
COAXIA
AM
Start playing the connected component.
To switch between the “VIDEO”
and “MD” function
Hold down VIDEO/MD and press ?/1 while
the system is turned on. Release ?/1 first,
then release VIDEO/MD. The system
switches the function from “VIDEO” to
“MD” or vice versa.
AM antenna
Connect a 6 to 15 meter (20 to 50 feet) insulated
wire to the AM antenna terminal. Leave the
supplied AM loop antenna connected.
Note
If the sound is distorted or too loud when “VIDEO” is
selected, change the function to “MD”.
Insulated wire
(not supplied)
Listening to a connected TV
1
Connect the audio cords.
FM 75
AM
COAXIAL
2
Press TV.
Tip
You can press FUNCTION on the remote repeatedly to
select “VIDEO”, “MD” or “TV”.
28US
Download from Www.Somanuals.com. All Manuals Search And Download.
General
The display starts flashing as soon as you
plug in the power cord even though you have
not turned on the system.
Troubleshooting
Problems and remedies
• The demonstration mode started. Press ?/1 (see
Should you encounter a problem with your
system, do the following:
The clock/timer setting is canceled.
• The power cord is disconnected or a power failure
have set the timer, redo “Waking up to music”
(page 22) and “Timer recording radio programs”
1 Make sure the power cord and speaker
cords are connected correctly and firmly.
2 Find your problem in the troubleshooting
checklist below and take the indicated
corrective action.
The radio presetting is canceled.
• The power cord is disconnected or a power failure
occured for longer than half a day. Redo
If the problem persists after doing all of the
above, consult your nearest Sony dealer.
Note that if service personnel changes some
parts during repair, these parts may be retained.
“– –:– –” appears in the display.
When the ?/1 indicator flashes
There is no sound.
Immediately unplug the power cord and
check the following items.
• Turn MASTER VOLUME clockwise (or press
VOLUME + on the remote).
• If your unit have voltage selector, is the
voltage selector set to the correct voltage?
Check the voltage for your region, then
make sure the voltage selector is set
correctly.
• Are you using the supplied speakers?
• Is anything blocking the ventilation holes
on the rear of the unit?
• Make sure the headphones are not connected to
the PHONES jack.
• There is no audio output during Timer Recording.
There is no microphone sound.
• Turn MASTER VOLUME (or press
VOLUME +/– on the remote repeatedly) or
MIC LEVEL to adjust the microphone volume.
• Make sure the microphone is connected to the
MIC 1 or MIC 2 jack correctly.
After checking the above items and fixing
any problem, plug in the power cord again
and turn on the system. If the ?/1 indicator
still flashing, or if the cause of the problem
cannot be found even after checking all the
above items, consult your nearest Sony
dealer.
There is severe hum or noise.
• A TV or VCR is placed too close to the unit. Move
the unit away from the TV or VCR.
• Move the unit away from the source of noise.
• Connect the unit to a different wall outlet.
• Install a noise filter (commercially available) to
the power cord.
The timer cannot be set.
• Set the clock again (page 8).
The timer does not function.
• Check the timer setting and set the correct time
• You cannot select the Play Timer and Timer
Recording simultaneously.
continued
29US
Download from Www.Somanuals.com. All Manuals Search And Download.
The remote does not function.
• Remove the obstacle between the remote and the
unit.
The disc does not eject.
• You cannot eject the disc during CD Synchro
Recording. Press x to cancel the CD Synchro
Recording, then press Z OPEN/CLOSE to eject
the disc.
• Move the remote closer to the unit.
• Point the remote at the unit’s sensor.
• Replace the batteries (R6/size AA).
• Locate the unit away from the fluorescent light.
• Consult your nearest Sony dealer.
Playback does not start.
• Open the disc tray and check whether a disc is
loaded.
There is acoustic feedback.
• Decrease the volume.
• Reload the disc.
• Move the microphone away from the speakers or
change the direction of the microphone.
• Load the disc that this system can play back
The color irregularity on a TV screen persists.
• Turn off the TV set once, then turn it on after 15
to 30 minutes. If the color irregularity still
persists, place the speakers farther away from the
TV set.
• Load the disc correctly.
• Load the disc in the tray with the label side up.
• Remove the disc and wipe away the moisture on
the disc, then leave the system turned on for a few
hours until the moisture evaporates.
• Press nN (or N on the remote) to start
playback.
The sound from the component connected to
the VIDEO/MD (AUDIO) IN jacks is distorted.
• If “VIDEO” appears in the display when you press
VIDEO/MD, switch to “MD” function (see “To
switch between the “VIDEO” and “MD”
Disc access takes a longer time.
• Set CD power manage function to “CD POWER
The sound skips.
Speakers
• Reload the disc.
Sound comes from one channel or
unbalanced left and right volume.
• Place the speakers as symmetrically as possible.
• Check that the speakers are connected securely
and correctly.
• Try moving the system to a place without
vibration (e.g., on top of a stable stand).
• Try moving the speakers away from the unit, or
placing them on separate stands. When you listen
to a track with bass sounds at high volume, the
speaker vibration may cause the sound to skip.
• The source being played back is monaural.
Sound lacks bass.
Playback does not start from the first track.
• The system is in Program Play or Shuffle Play
mode. Press PLAY MODE on the remote
repeatedly until “ALL DISCS”, “1 DISC” or
“ALBM” lights up in the display.
• Check that the speaker’s + and – terminals are
connected correctly.
Disc player
The disc tray does not open and “LOCKED”
appears in the display.
• Contact your nearest Sony dealer or local
authorized Sony service facility.
The disc tray does not close.
• Load the disc correctly.
• Always close the tray by pressing Z OPEN/
CLOSE. Trying to push the tray closed with your
fingers may cause problems with the system.
30US
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner
MP3 audio track cannot be played back.
• Recording was not performed according to the
ISO 9660 level 1, level 2 or Joliet in the expansion
format.
There is severe hum or noise. (“TUNED” or
“STEREO” flashes in the display)
• Find a place and an orientation that provide good
reception, then set up the antenna again. If you
cannot obtain good reception, we recommend you
connect an external antenna.
• The MP3 audio track does not have the extension
“.MP3”.
• The data is not stored in MP3 format even though
it has extension “.MP3”.
• The MP3 audio tracks in format other than MPEG
1, 2 and 2.5 Audio Layer 3 cannot be played back.
• The system can play back to a depth of 8 folders
only.
• The supplied FM lead antenna receives signals
along its entire length, so make sure you extend it
fully.
• MP3 audio tracks in MP3 PRO format cannot be
played back on this system.
• Locate the antennas as far away from the speaker
cords as possible.
MP3 audio tracks take longer time to play back
than others.
• Try turning off surrounding electrical equipment.
• Set CD power manage function to “CD POWER
• After the system reads all tracks on the discs,
playback may take more time than usual if:
– the number of albums or tracks on the disc is
very large.
A stereo FM program cannot be received in
stereo.
• Press FM MODE on the remote repeatedly until
“MONO” disappears in the display.
– the album and track organization structure is
very complex.
The album title, track title, ID3 tag and the
CD-TEXT characters do not appear properly.
• Use a disc that conforms with ISO 9660 level 1,
level 2 or Joliet in the expansion format.
• The ID3 tag is not version 1 or version 2.
• The character code that can be displayed by this
system are as follow:
Tape deck
The tape does not record or playback, or there
is a decrease in sound level.
• The tape heads are dirty (see “Cleaning the tape
• The record/playback heads are magnetized (see
– Upper cases (A to Z)
– Lower cases (a to z)
The tape does not erase completely.
• The record/playback heads are magnetized (see
– Numbers (0 to 9)
– Symbols (< > * +, – / [ ] \ _)
Other characters may not be displayed correctly.
There is excessive wow or flutter, or the sound
drops out.
• The capstans or pinch rollers are dirty (see
Noise increases or the high frequencies are
erased.
• The record/playback heads are magnetized. (see
The tape does not record.
• No tape is loaded. Load a tape.
• The tab has been removed from the tape. Cover
• The tape has reeled to the end.
continued
31US
Download from Www.Somanuals.com. All Manuals Search And Download.
The system cannot play back the reverse side
of the tape in Deck A.
Push STOP!
You have pressed PLAY MODE on the remote
during playback.
• The system only can play back front side of the
tape in Deck A. This is not a malfunction.
Step Full!
When you turn . > clockwise or
counterclockwise (or press –. or >+ on
the remote), “Not in Use” flashes in the
display.
You tried to program more than 25 steps.
Reading
The system is reading information of the disc. Some
buttons are not available.
• The system does not has AMS (Automatic Music
Sensor) function. This is not a malfunction.
Tape
If the system still does not
operate properly after performing
the above measures or other
troubles does not described
above occur, reset the system as
follows:
No Tab
You cannot record the tape because the tab has been
removed from the tape.
No Tape
There is no tape in the tape deck.
Use buttons on the unit for the operation.
Timer
1 Unplug the power cord.
OFF TIME NG!
2 Plug the power cord back in.
3 Press ?/1 to turn on the system.
4 Press x, ENTER and ?/1 at the same time.
The system is reset to the factory settings.
You should set the settings you made, such as
the preset stations, clock and timer.
The on time and off time of Play Timer or Timer
Recording is same.
SET CLOCK!
You pressed CLOCK/TIMER SELECT before the
clock is set.
SET TIMER!
You pressed CLOCK/TIMER SELECT before Play
Timer or Timer Recording is set.
Messages
PUSH SELECT!
You tried to set the clock or timer during timer
operation.
One of the following messages may appear or
flash in the display during operation.
Disc
Others
NO STEP
Not in Use
You have cleared all the steps you programmed.
You have pressed a button those operations is not
allowed or invalid at that time.
OVER
You have reached the end of the disc while turning
and holding m M clockwise (or pressing M
on the remote) during playback or pause.
No Disc
There is no disc on the disc tray.
32US
Download from Www.Somanuals.com. All Manuals Search And Download.
On heat build-up
• Although the system heats up during operation, this
Additional Information
Precautions
is not a malfunction.
• Place the system in a location with adequate
ventilation to prevent heat build-up in the system.
• If you continuously use this system at a large volume,
the cabinet temperature of the top, side and bottom
rises considerably. To avoid burning yourself, do not
touch the cabinet.
On operating voltage
Before operating the system, check that the operating
voltage of your system is identical with the voltage of
your local power supply.
• To prevent a malfunction, do not cover the
ventilation hole for the cooling fan.
On safety
On operation
• The system is not disconnected from the AC power
source (mains) as long as it is connected to the wall
outlet, even if the system itself has been turned off.
• Unplug the system from the wall outlet (mains) if it
is not to be used for an extended period of time. To
disconnect the power cord (mains lead), pull it out by
the plug. Never pull the cord itself.
• If the system is brought directly from a cold to a
warm location, or is placed in a very damp room,
moisture may condense on the lens inside the system.
Should this occur, the system will not operate
properly. Remove the disc and leave the system
turned on for about an hour until the moisture
evaporates.
• Should any solid object or liquid fall into the system,
unplug the system and have it checked by qualified
personnel before operating it any further.
• When you move the system, take out any disc.
If you have any questions or problems concerning your
system, please consult your nearest Sony dealer.
• For customers in United States
One blade of the plug is wider than other for the
purpose of safety and will fit to the wall outlet only
one way. If you are unable to insert the plug fully into
the outlet, contact your dealer.
Notes on discs
• Before playing, clean the disc with a cleaning cloth.
Wipe the disc from the center out.
• AC power cord must be changed only at the qualified
service shop.
• Do not use solvents such as benzene, thinner,
commercially available cleaners or anti-static spray
intended for vinyl LPs.
On placement
• Do not expose the disc to direct sunlight or heat
sources such as hot air ducts nor leave it in a car
parked in direct sunlight.
• Do not place the system in an inclined position.
• Do not place the system in locations where it is;
– Extremely hot or cold
• Do not use discs encircled with a protection ring.
This may cause a malfunction to the system.
• When using discs that have glue or similar tacky
substance on the label side of the disc or that used a
special ink when the label was printed, there is a
chance that the disc or label may become attached to
parts inside this system. When this occurs, it may not
be possible to remove the disc, and may also cause
this system to malfunction. Be sure to check that the
label side of the disc is not sticky before using.
The following types of disc should not be used:
– Rental or used discs with attached seals where the
glue extends beyond the seal. The perimeter of the
seal on the disc is tacky.
– Dusty or dirty
– Very humid
– Subject to vibrations
– Subject to direct sunlight
• Use caution when placing the system or speakers on
surfaces that have been specially treated (with wax,
oil, polish, etc.) as staining or discoloration of the
surface may result.
– Discs that have labels printed using a special ink
that feels tacky when touched.
• Discs with non-standard shapes (e.g., heart, square,
star) cannot be played back on this system.
Attempting to do so may damage the system. Do not
use such discs.
continued
33US
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the cabinet
Clean the cabinet, panel and controls with a soft cloth
slightly moistened with mild detergent solution. Do not
use any type of abrasive pad, scouring powder or
solvent such as thinner, benzene or alcohol.
Specifications
AUDIO POWER SPECIFICATION
POWER OUTPUT AND TOTAL HARMONIC
DISTORTION:
To save a tape permanently
To prevent a tape from being accidentally recorded
over, break off the tape tab from side A or B as
illustrated.
With 6-ohm loads, both channels driven, from
120 Hz – 10 kHz; rates 230 watts per channel
minimum RMS power, with no more than 10% total
harmonic distortion from 250 miliwatts to rated
output.
Break off the
tape tab
Amplifier section
Total harmonic distortion
Less than 0.1%
(6 ohms at 1 kHz, 100 W)
Inputs
If you later want to reuse the tape for recording, cover
the broken tab with adhesive tape.
VIDEO/MD (AUDIO) IN (phono jacks):
voltage 250/450 mV,
impedance 47 kiloohms
TV (AUDIO) IN (phono jack):
voltage 250 mV,
Before placing a tape in the tape deck
Take up any slack in the tape deck. Otherwise, the tape
may get entangled in the parts of the tape deck and
become damaged.
impedance 47 kiloohms
When using a tape longer than
90 minutes
The tape is very elastic. Do not change the tape
operations such as playback, stop and fast-winding etc.
frequently. The tape may get entangled in the tape
deck.
MIC (phone jack):
Outputs
sensitivity 1 mV,
impedance 10 kiloohms
PHONES (stereo mini jack):
accepts headphones of
8 ohms or more
Use only the supplied
speaker
FRONT SPEAKER:
Cleaning the tape heads
Clean the tape heads after every 10 hours of use. Be
sure to clean the tape heads before you start an
important recording or after playing an old tape. Use a
separately sold dry-type or wet-type cleaning tape. For
details, refer to the instructions of the cleaning tape.
SURROUND SPEAKER: Use only the supplied
speaker
Disc player section
System
Compact disc and digital
audio system
Demagnetizing the tape heads
Laser
Semiconductor laser
(λ=780 nm)
Emission duration:
continuous
Max. 44.6 µW*
Demagnetize the tape heads and the metal parts that
have contact with the tape after every 20 to 30 hours of
use with a separately sold demagnetizing tape. For
details, refer to the instructions of the demagnetizing
tape.
Laser Output
*This output is the value
measured at a distance of
200 mm from the objective
lens surface on the Optical
Pick-up Block with 7 mm
aperture.
Frequency response
Wave length
2 Hz – 20 kHz (±0.5 dB)
780 – 790 nm
Signal-to-noise ratio
Dynamic range
More than 90 dB
More than 90 dB
34US
Download from Www.Somanuals.com. All Manuals Search And Download.
Tape deck section
General
Recording system
Frequency response
4-track 2-channel stereo
50 – 13,000 Hz (±3 dB),
using Sony TYPE I tape
±0.15% W.Peak (IEC)
0.1% W.RMS (NAB)
±0.2% W.Peak (DIN)
Power requirements
North American models: 120 V AC, 60 Hz
Power consumption
Dimensions (w/h/d) (Approx.)
280 × 360 × 398.5 mm
250 watts
Wow and flutter
Mass (Approx.)
15.6 kg
Supplied accessories:
Remote Commander (1)
Batteries (2)
AM loop antenna (1)
FM lead antenna (1)
Front speaker pads (8)
Surround speaker pads (8)
Tuner section
FM stereo, FM/AM superheterodyne tuner
FM tuner section
Tuning range
Antenna
Antenna terminals
Intermediate frequency
87.5 – 108.0 MHz
FM lead antenna
75 ohm unbalanced
10.7 MHz
Design and specifications are subject to change
without notice.
AM tuner section
Tuning range
530 – 1,710 kHz
(with the interval set at
10 kHz)
531 – 1,710 kHz
(with the interval set at
9 kHz)
Antenna
Antenna terminals
Intermediate frequency
AM loop antenna
External antenna terminal
450 kHz
Speakers
Front speakers
• SS-GNX100
Speaker system
2-way, 2-unit, bass-reflex
type
Speaker units
Woofer:
Tweeter:
20 cm, cone type
2.5 cm, horn type
6 ohms
Nominal impedance
Dimensions (w/h/d) (Approx.)
280 × 416 × 305 mm
Mass (Approx.)
6.5 kg net per speaker
Surround speakers
SS-RSX80
Speaker system
2-way, 2-unit, bass-reflex
type
Speaker units
Woofer:
Tweeter:
13 cm, cone type
2.5 cm, horn type
24 ohms
Nominal impedance
Dimensions (w/h/d) (Approx.)
210 × 416 × 230 mm
4.5 kg net per speaker
Mass (Approx.)
35US
Download from Www.Somanuals.com. All Manuals Search And Download.
List of button locations and reference pages
Illustration number
How to use page 36 to 38
r
Use this page to find the location of buttons and other
parts of the system, subwoofer and remote that are
mentioned in the text.
R
R
Name of button/part Reference page
Main unit
ALPHABETICAL ORDER
SYMBOLS
M – R
32)
.>(gobackward/forward)
m M (rewind/fast forward)
32)
A – D
25)
Display r;
S – Z
Z A (Eject A) wk
B Z (Eject B) qh
SURR SPEAKER MODE ra
E – L
IR Receptor eh
36US
Download from Www.Somanuals.com. All Manuals Search And Download.
Top Panel
1
2 3
Front Panel
ra
4
6
r;
el
ek
5
7
9
qz
ej
eh
8
q;
eg
ef
qs
qf
qd
ed
es
ea
qg
qj
ql
e;
wl
qh
qk
wk
wj
wh
wg
wf
wd ws wa w;
continued
37US
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
ALPHABETICAL ORDER
The + button has a tactile dot.*
A – E
1
2
3
SYMBOLS
CLOCK/TIMER SELECT 2
23)
4
5
wh
wg
wf
6
7
wd
ws
8
9
q;
wa
w;
qa
qs
ql
F – Z
qk
qj
qd
qh
qf
qg
* Use the tactile dot as a reference
when operating the system.
38US
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Sony Corporation Printed in Malaysia
Download from Www.Somanuals.com. All Manuals Search And Download.
|