2-895-955-12(2)
DVD Home Theatre
System
Operating Instructions
DAV-DZ20
©2007 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
This System Can Play the Following
Discs .................................................6
Selecting [ORIGINAL] or [PLAY LIST]
on a DVD-R/DVD-RW.................. 33
Adjusting the Delay Between the Picture
and Sound....................................... 37
About MP3 Audio Tracks and JPEG
Image Files ..................................... 38
Playing DATA CDs or DATA DVDs with
Files ................................................ 40
Playing Audio Tracks and Images as a
Slide Show with Sound .................. 42
Enjoying DivX® Videos ...................... 44
(Except for United Kingdom and
North American models)
Step 1: Connecting the System and
TV ............................................... 9
Step 3: Performing the Quick
Setup........................................ 13
Enjoying the Radio or Other
Enjoying TV Sound from All
Speakers.................................. 20
Selecting the Movie or Music
Mode ........................................ 21
Playing VIDEO CDs with PBC Functions
(Ver.2.0) ......................................... 46
Enjoying Surround Sound by Using Sound
Field................................................22
Searching for a Particular Point on
a Disc ..............................................24
(Scan, Slow-motion Play, Freeze
Frame)
Controlling the TV with the Supplied
Remote ........................................... 50
Using the THEATRE SYNC
Function.......................................... 50
Changing the Brightness of the Front
Panel Display.................................. 52
Searching for a Title/Chapter/Track/
Scene, etc........................................25
Resuming Playback from the Point Where
You Stopped the Disc.....................26
continued
GB
3
Download from Www.Somanuals.com. All Manuals Search And Download.
(CUSTOM PARENTAL
CONTROL)
Getting Optimal Surround Sound for a
Room ..............................................57
Setting the Display or Sound Track
Language ........................................60
(When letters/numbers appear in
the display)
GB
4
Download from Www.Somanuals.com. All Manuals Search And Download.
4) DivX, DivX Certified, and associated logos are
trademarks of DivX, Inc. and are used under license.
About This Manual
• The instructions in this manual describe the
controls on the remote. You can also use the
controls on the unit if they have the same or
similar names as those on the remote.
• The Control Menu items may vary depending
on the area.
• “DVD” may be used as a general term for
DVD VIDEOs, DVD+RWs/DVD+Rs, and
DVD-RWs/DVD-Rs.
• Measurements are expressed in feet (ft) for
North American models.
• The following symbols are used in this
manual.
Symbol
Meaning
Functions available for DVD
VIDEOs, DVD-Rs/DVD-RWs in
video mode, and DVD+Rs/
DVD+RWs
Functions available for DVD-Rs/
DVD-RWs in VR (Video
Recording) mode
Functions available for VIDEO
CDs (including Super VCDs or CD-
Rs/CD-RWs in video CD format or
Super VCD format)
Functions available for music CDs
or CD-Rs/CD-RWs in music CD
format
Functions available for DATA CDs
(CD-ROMs/CD-Rs/CD-RWs)
containing MP31) audio tracks,
JPEG image files, and DivX2)3)4)
video files
Functions available for DATA
DVDs (DVD-ROMs/DVD-Rs/
DVD-RWs/DVD+Rs/DVD+RWs)
containing MP31) audio tracks,
JPEG image files, and DivX2)3)4)
video files
1)MP3 (MPEG1 Audio Layer 3) is a standard format
defined by ISO/MPEG which compresses audio data.
2)Except for United Kingdom and North American
models.
®
3) DivX is a video file compression technology,
developed by DivX, Inc.
GB
5
Download from Www.Somanuals.com. All Manuals Search And Download.
The system can play DVD-ROMs/DVD+RWs/
DVD-RWs/DVD+Rs/DVD-Rs recorded in the
following formats:
This System Can Play the
Following Discs
– MP3 audio tracks, JPEG image files, and
DivX video files* of format conforming to
UDF (Universal Disc Format)
Format of
Disc logo
discs
* Except for United Kingdom and North American
models.
DVD VIDEO
Example of discs that the
system cannot play
DVD-RW/
DVD-R
The system cannot play the following discs:
• CD-ROMs/CD-Rs/CD-RWs other than those
recorded in the formats listed on page 6
• CD-ROMs recorded in PHOTO CD format
• Data part of CD-Extras
DVD+RW/
DVD+R
• DVD Audios
• Super Audio CD
• DATA DVDs that do not contain MP3 audio
tracks, JPEG image files, or DivX video files*
* Except for United Kingdom and North American
models.
VIDEO CD
(Ver. 1.1 and
2.0 discs)/
• DVD-RAMs
Also, the system cannot play the following
discs:
• A DVD VIDEO with a different region code
Audio CD
CD-RW/CD-R
(audio data)
(MP3 files)
• A disc that has a non-standard shape (e.g.,
card, heart)
(JPEG files)
• A disc with paper or stickers on it
• A disc that has the adhesive of cellophane tape
or a sticker still left on it
Notes about CD-R/CD-RW/DVD-R/
DVD-RW/DVD+R/DVD+RW
“DVD-RW,” “DVD+RW,” “DVD+R,”
“DVD VIDEO,” and the “CD” logos are trademarks.
In some cases, CD-R/CD-RW/DVD-R/DVD-
RW/DVD+R/DVD+RW cannot be played on
this system due to the recording quality or
physical condition of the disc, or the
characteristics of the recording device and
authoring software.
Note about CDs/DVDs
The system can play CD-ROMs/CD-Rs/CD-
RWs recorded in the following formats:
– audio CD format
The disc will not play if it has not been correctly
finalized. For more information, see the
operating instructions for the recording device.
Note that some playback functions may not
work with some DVD+RWs/DVD+Rs, even if
they have been correctly finalized. In this case,
– VIDEO CD format
– MP3 audio tracks, JPEG image files, and
DivX video files* of format conforming to
ISO 9660 Level 1/Level 2, or its extended
format, Joliet
GB
6
Download from Www.Somanuals.com. All Manuals Search And Download.
view the disc by normal playback. Also some
DATA CDs/DATA DVDs created in Packet
Write format cannot be played.
If you try to play any other DVD VIDEO, the
message [Playback prohibited by area
limitations.] will appear on the TV screen.
Depending on the DVD VIDEO, no region code
indication may be given even though playing the
DVD VIDEO is prohibited by area restrictions.
Music discs encoded with
copyright protection
technologies
This product is designed to play back discs that
conform to the Compact Disc (CD) standard.
Recently, various music discs encoded with
copyright protection technologies are marketed
by some record companies. Please be aware that
among those discs, there are some that do not
conform to the CD standard and may not be
playable by this product.
Note about playback
operations of DVDs and
VIDEO CDs
Some playback operations of DVDs and VIDEO
CDs may be intentionally set by software
producers. Since this system plays DVDs and
VIDEO CDs according to the disc contents the
software producers designed, some playback
features may not be available. Be sure to read the
operating instructions supplied with the DVDs
or VIDEO CDs.
Note on DualDiscs
A DualDisc is a two sided disc product which
mates DVD recorded material on one side with
digital audio material on the other side.
However, since the audio material side does not
conform to the Compact Disc (CD) standard,
playback on this product is not guaranteed.
Copyrights
This product incorporates copyright protection
technology that is protected by U.S. patents and
other intellectual property rights. Use of this
copyright protection technology must be
authorized by Macrovision, and is intended for
home and other limited viewing uses only unless
otherwise authorized by Macrovision. Reverse
engineering or disassembly is prohibited.
About Multi Session CD
• This system can play Multi Session CDs when
an MP3 audio track is contained in the first
session. Any subsequent MP3 audio tracks
recorded in later sessions can also be played
back.
• This system can play Multi Session CDs when
a JPEG image file is contained in the first
session. Any subsequent JPEG image files
recorded in later sessions can also be played
back.
• If audio tracks and images in music CD format
or video CD format are recorded in the first
session, only the first session will be played
back.
This system incorporates with Dolby* Digital
and Dolby Pro Logic (II) adaptive matrix
surround decoder and the DTS** Digital
Surround System.
* Manufactured under license from Dolby
Laboratories.
“Dolby”, “Pro Logic”, and the double-D symbol are
trademarks of Dolby Laboratories.
**Manufactured under license from DTS, Inc.
“DTS” and “DTS Digital Surround” are registered
trademarks of DTS, Inc.
Region code
Your system has a region code printed on the
rear of the unit and will only play DVDs labeled
with the same region code.
ALL
DVD VIDEOs labeled
system.
will also play on this
GB
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started – BASIC –
See Unpacking in Specifications, page 71.
Inserting batteries into the remote
You can control the system using the supplied remote. Insert two R6 (size AA) batteries by matching
the 3 and # ends on the batteries to the markings inside the compartment. To use the remote, point it
at the remote sensor on the unit.
Note
• Do not leave the remote in an extremely hot or humid place.
• Do not use a new battery with an old one.
• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct sunlight or lighting apparatus. Doing so may cause a malfunction.
• If you do not intend to use the remote for an extended period of time, remove the batteries to avoid possible damage
from battery leakage and corrosion.
GB
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 1: Connecting the System and TV
The following is the connection of the unit to the speakers and TV.
Refer to the connection diagram below, and read the additional information from 1 to 4 on the
following pages.
Front speaker (L)
Front speaker (R)
Center speaker
AM loop antenna (aerial)
ANTENNA
EURO AV
COAXIAL
FM75
AM
FRONT
R
FRONT
L
SUR
R
SUR
L
CENTER
WOOFER
SPEAKER
OUTPUT(TO TV)
AC power cord (mains lead)
FM wire antenna
(aerial)
TV
Subwoofer
Surround speaker (L)
Surround speaker (R)
:Signal flow
continued
GB
9
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Connecting the Speakers
Required cords
The connector and color tube of the speaker cords are the same color as the label of the jacks to be
connected.
Gray
To the SPEAKER jack
(+)
(–)
Color tube
Black
Note
• Do not catch the speaker cord insulation in the SPEAKER jack.
To avoid short-circuiting the speakers
Short-circuiting of the speakers may damage the system. To prevent this, be sure to follow these
precautions when connecting the speakers. Make sure the bare wire of each speaker cord does not touch
another speaker terminal or the bare wire of another speaker cord, such as shown below.
Stripped speaker cord is touching
another speaker terminal.
Stripped cords are touching each other
due to excessive removal of insulation.
After connecting all the components, speakers, and AC power cord (mains lead), output a test tone to
check that all the speakers are connected correctly. For details on outputting a test tone, see page 64.
If no sound is heard from a speaker while outputting a test tone, or a test tone is output from a speaker
other than the one currently displayed on the Setup Display, the speaker may be short-circuited. If this
happens, check the speaker connection again.
Note
• Be sure to match the speaker cord to the appropriate terminal on the components: 3 to 3, and # to #. If the cords
are reversed, the sound will lack bass and may be distorted.
GB
10
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Connecting the TV
Required cords
SCART (EURO AV) cord (not supplied)
.
Be sure to connect the SCART (EURO AV) cord to the EURO AV T OUTPUT (TO TV) jack on the
unit.
When you connect using the SCART (EURO AV) cord, check that the TV conforms to S video or RGB
signals. If the TV conforms to S video, change the input mode of the TV to RGB signals. Refer to the
operating instructions supplied with the TV to be connected.
Tip
• When you want to output the TV sound or stereo sound of a 2 channel source from the 6 speakers, select the “Dolby
3 Connecting the Antenna (Aerial)
To connect the AM loop antenna (aerial)
The shape and the length of the antenna (aerial) is designed to receive AM signals. Do not dismantle
or roll up the antenna (aerial).
1
2
Remove only the loop part from the plastic stand.
Set up the AM loop antenna (aerial).
3
Connect the cords to the AM antenna (aerial) terminals.
Cord (A) or cord (B) can be connected to either terminal.
Insert the cord pushing
down the terminal clamp.
A
B
Insert until this
part.
Note
• Do not place the AM loop antenna (aerial) near the unit or other AV equipment, as noise may result.
Tip
• Adjust the direction of the AM loop antenna (aerial) for best AM broadcast sound.
continued
GB
11
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Make sure the AM loop antenna (aerial) is connected firmly by pulling softly.
To connect the FM wire antenna (aerial)
Connect the FM wire antenna (aerial) to the COAXIAL FM 75 Ω jack.
FM wire antenna (aerial)
(supplied)
FM wire antenna (aerial)
(supplied)
or
COAXIAL FM 75 Ω jack
COAXIAL FM 75 Ω jack
Note
• Be sure to fully extend the FM wire antenna (aerial).
• After connecting the FM wire antenna (aerial), keep it as horizontal as possible.
Tip
• If you have poor FM reception, use a 75-ohm coaxial cable (not supplied) to connect the unit to an outdoor FM
antenna (aerial) as shown below.
Unit
Outdoor FM antenna (aerial)
4 Connecting the AC power cord (mains lead)
Before connecting the AC power cord (mains lead) of this unit to a wall outlet (mains), connect the
speakers to the unit.
GB
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Positioning the
System
Step 3: Performing the
Quick Setup
Follow the steps below to make the minimum
number of basic adjustments for using the
system.
Positioning the speakers
For the best possible surround sound, all the
speakers other than the subwoofer should be
placed at the same distance from the listening
position (A).
"/1
However, this system allows you to place the
center speaker up to 1.6 meters (5 ft) closer (B)
and the surround speakers up to 5.0 meters (16
ft) closer (C) to the listening position.
The front speakers can be placed from 1.0 to
7.0 meters (3 to 23 ft) (A) from the listening
position.
C/X/x/c,
Place speakers as illustrated below.
DISPLAY
1
2
Turn on the TV.
Press [/1.
Note
• Make sure that the function is set to “DVD”
3
Switch the input selector on your TV so
that the signal from the system
appears on the TV screen.
[Press [ENTER] to run QUICK SETUP.]
appears at the bottom of the TV screen. If
this message does not appear, recall the
again.
Note
• Do not set the speakers in an inclined position.
• Do not place the speakers in locations that are:
– Extremely hot or cold
– Dusty or dirty
– Very humid
– Subject to vibrations
– Subject to direct sunlight
• When cleaning, use a soft cloth such as a cleaning
cloth for glasses.
• Do not use any type of abrasive pad, scouring
powder, or solvent such as alcohol or benzine.
Tip
• When you change the positions of the speakers, it is
recommended that you change the settings. For
details, see “Getting Optimal Surround Sound for a
continued
GB
13
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Press
without inserting a disc.
9
Press C/c to select the speaker
formation image as the speakers are
actually positioned.
The Setup Display for selecting the
language used in the on-screen display
appears.
For details, see “Getting Optimal Surround
LANGUAGE SETUP
OSD:
ENGLISH
ENGLISH
FRENCH
SPEAKER FORMATION
MENU:
AUDIO:
SUBTITLE:
SPANISH
PORTUGUESE
STANDARD
5
6
Press X/x to select a language.
10
11
12
Press
.
The system displays the menu and subtitles
in the selected language.
The Setup Display for selecting the speaker
distance appears.
Press
.
The Setup Display for selecting the aspect
ratio of the TV to be connected appears.
SPEAKER SETUP
CONNECTION:
DISTANCE:
LEVEL(FRONT):
LEVEL(SURROUND):
TEST TONE:
FRONT:
CENTER:
SURROUND:
SCREEN SETUP
16:9
16:9
TV TYPE:
OFF
SCREEN SAVER:
BACKGROUND:
3.0m
3.0m
3.0m
4:3 LETTER BOX
4:3 PAN SCAN
Press X/x to select the front speaker
distance from the listening position,
then press
.
7
8
Press X/x to select the setting that
matches your TV type.
SPEAKER SETUP
CONNECTION:
DISTANCE:
x If you have a wide-screen TV or a 4:3
standard TV with a wide-screen mode
[16:9] (page 61)
LEVEL(FRONT):
LEVEL(SURROUND):
TEST TONE:
FRONT:
CENTER:
SURROUND:
OFF
3.0m
3.0m
3.0m
x If you have a 4:3 standard TV
[4:3 LETTER BOX] or [4:3 PAN SCAN]
Press
.
Press X/x to select the center speaker
distance from the listening position,
then press
The Setup Display for selecting the speaker
formation appears.
.
SPEAKER SETUP
CONNECTION:
DISTANCE:
LEVEL(FRONT):
LEVEL(SURROUND):
TEST TONE:
OFF
FRONT:
CENTER:
SURROUND:
3.0m
3.0m
3.0m
GB
14
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Press X/x to select the surround
speaker distance from the listening
Selecting the output method for
video signals
position, then press
.
Selects the output method for video signals from
the EURO AV T OUTPUT (TO TV) jack on
the rear panel of the unit.
Quick Setup is finished. All connections
and setup operations are complete.
To quit the Quick Setup
Press
DISPLAY in any Step.
Tip
FUNCTION
• If you change the position of the speakers, reset the
speaker settings. See “Getting Optimal Surround
VIDEO
FORMAT
• If you want to change any of the settings, see “Using
To recall the Quick Setup display
1 Press
stop mode.
The Control Menu display appears.
DISPLAY when the system is in
2 Press X/x to select [SETUP], then
press
The options for [SETUP] appear.
.
1
2
Press FUNCTION repeatedly to select
“DVD.”
(
)
)
1 2 2 7
(
1 8 3 4
DVD VIDEO
T
0 : 0 0 : 0 2
Press VIDEO FORMAT.
Each time you press VIDEO FORMAT, the
display changes as follows:
QUICK
QUICK
CUSTOM
RESET
t LINE VIDEO
r
LINE RGB
3 Press X/x to select [QUICK], then press
The Quick Setup display appears.
.
• “LINE VIDEO”: outputs video signals.
• “LINE RGB”: outputs RGB signals.
Note
• If your TV does not accept RGB signals, no
picture appears on the TV screen even if you
select “LINE RGB.” Refer to the operating
instructions supplied with your TV.
GB
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the demonstration
mode to on/off
Getting Started – ADVANCED –
1
2
Press SYSTEM MENU.
Turning off the
Demonstration
Press X/x repeatedly until “DEMO”
appears in the front panel display, then
press
or c.
3
Press X/x to select a setting.
"/1
The default setting is underlined.
• “DEMO ON”: sets the demonstration
mode to on.
• “DEMO OFF”: sets the demonstration
mode to off.
4
5
Press
.
SYSTEM
MENU
The setting is made.
Press SYSTEM MENU.
X/x/c,
The system menu turns off.
After connecting the AC power cord (mains
lead), the demonstration appears in the front
panel display. When you press "/1 on the
remote, the demonstration turns off.
Note
• When you press "/1 on the unit, the demonstration
does not turn off.
• When you set the demonstration mode in the system
menu to on, the demonstration does not turn off even
though you press "/1 on the remote. To turn off the
demonstration, set the demonstration mode to off,
then press "/1 on the remote. When the
demonstration mode is set to off, the system saves
power in standby mode.
• If the system is at its factory default settings (ex. after
off the demonstration simply by pressing "/1 on the
remote. Otherwise, to stop the demonstration, you
need to set “DEMO” to “DEMO OFF.”
GB
16
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Hang the speakers on the screws.
Installing the Speakers on
a Wall
4.6 mm
(3/16 inch)
You can use the speakers by installing on the
wall.
10 mm
13
(
/32 inch)
Installing the speakers on a
wall
1
Prepare screws (not supplied) that are
suitable for the hole on the back of
each speaker. See the illustrations
below.
Rear of speaker
4 mm (5/32 inch)
Note
• Use screws that are suitable for the wall material and
strength. As a plaster board wall is especially fragile,
attach the screws securely to a beam and fasten them
to the wall. Install the speakers on a vertical and flat
wall where reinforcement is applied.
25 mm (1inch)
Hole on the back of
the speaker (except
for the center
speaker)
4.6 mm
• Contact a screw shop or installer regarding the wall
material or screws to be used.
(3/16 inch)
• Sony is not responsible for accident or damage
caused by improper installation, insufficient wall
strength or improper screw installation, natural
calamity, etc.
10 mm
13
(
/32 inch)
2
Fasten the screws to the wall.
6 to 9 mm
3
(1/4 to
/
inch)
8
GB
17
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Load a disc.
Place one disc on the tray, and then press A.
Basic Operations
Playing Discs
Adjust the
volume
"/1
H FUNCTION
A
Note
• When you play an 8 cm disc, place it on the
inner circle of the tray. Be careful that the disc is
not skewed on the inner circle of the tray.
• Do not forcibly press the disc tray closed with
your finger, as this may cause malfunction.
• Do not place more than one disc on the tray.
Disc tray
6
Press H.
The system starts playback (continuous
play).
"/1
Z
Adjust the volume on the unit.
The volume level appears on the TV screen
and in the front panel display.
FUNCTION
Note
• Depending on the system status, the volume level
may not appear on the TV screen.
MUTING
To save the power in standby
mode
VOLUME +/–
./>
Press "/1 while the system turns on. To cancel
standby mode, press "/1 once.
/
H
x
X
Additional operations
Depending on the DVD VIDEO or VIDEO CD,
some operations may be different or restricted.
Refer to the operating instructions supplied with
your disc.
To
Press
Stop
x
Pause
X
1
2
Turn on your TV.
Resume play after pause
X or H
Switch the input selector on the TV to
this system.
Go to the next chapter,
track, or scene
> (except for JPEG)
3
Press "/1.
Go back to the preceding
chapter, track, or scene
. (except for JPEG)
The system turns on.
Turn off the sound
temporarily
MUTING. To cancel,
press it again or
VOLUME + to adjust
the sound volume.
Unless the system is set to “DVD,” press
FUNCTION to select “DVD.”
4
Press A.
GB
18
Download from Www.Somanuals.com. All Manuals Search And Download.
To
Press
Enjoying the Radio or
Other Components
Stop play and remove the
disc
Z on the remote or A
on the unit.
Replay the previous scene*
(instant
replay) during
playback.
Briefly fast forward the
current scene**
(instant
advance) during
playback.
FUNCTION
* DVD VIDEOs/DVD-RWs/DVD-Rs only. The
button can be used except for DivX video files
(except for United Kingdom and North American
models).
**DVD VIDEOs/DVD-RWs/DVD-Rs/DVD+RWs/
DVD+Rs only. The button can be used except for
DivX video files (except for United Kingdom and
North American models).
SYSTEM
MENU
X/x/c,
Note
• You may not be able to use the instant replay or
instant advance function with some scenes.
Selecting the connected
component
Press FUNCTION repeatedly until the
desired function name appears in the front
panel display.
Each time you press FUNCTION, the mode of
the system changes in the following sequence.
DVD t TUNER FM t TUNER AM t
TV t …
Changing the input level of
the sound from connected
components
Distortion may occur when listening to a TV
connected to the EURO AV T OUTPUT (TO
TV) jack on the rear panel. This is not a
malfunction and will depend on the connected
TV.
To prevent this, you can change the input level.
1
2
Press FUNCTION repeatedly until “TV”
appears in the front panel display.
Press SYSTEM MENU.
continued
GB
19
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Press X/x repeatedly until
“ATTENUATE” appears in the front
panel display, then press
Enjoying TV Sound from All
Speakers
or c.
Press X/x to select a setting.
The default setting is underlined.
You can enjoy TV sound from all the speakers in
this system.
For details, see “Step 1: Connecting the System
• “ATT ON”: attenuates the input level.
The output level is changed.
• “ATT OFF”: normal input level.
5
6
Press
.
The setting is made.
Press SYSTEM MENU.
FUNCTION
The system menu turns off.
SOUND
FIELD
1
2
Press FUNCTION repeatedly until “TV”
appears in the front panel display.
Press SOUND FIELD repeatedly until
the sound field you want appears in the
front panel display.
When you want to output the TV sound or
stereo sound of a 2 channel source from the
6 speakers, select the “PRO LOGIC,” “PLII
MOVIE,” or “PLII MUSIC” sound field.
GB
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Selecting the Movie or
Music Mode
You can choose a suitable sound mode for
movies or music.
MOVIE/
MUSIC
Press MOVIE/MUSIC during playback.
Press MOVIE/MUSIC repeatedly until the
mode you want lights up in the front panel
display. The default setting is underlined.
• AUTO: selects the mode automatically to
produce the sound effect depending on the
disc.
• MOVIE: provides the sound for movies.
• MUSIC: provides the sound for music.
Tip
• When the movie or music mode is selected,
“MOVIE” or “MUSIC” is displayed in the front panel
display. When neither “MOVIE” or “MUSIC” is
displayed in the front panel display, “AUTO” is
selected.
GB
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Automatic outputting of the
original sound
Sound Adjustments
x AUTO FORMAT DIRECT STANDARD
The auto decoding function automatically
detects the type of audio signal being input
(Dolby Digital, DTS, or standard 2 channel
stereo) and performs the proper decoding if
necessary. This mode presents the sound as it
was recorded/encoded, without adding any
effects (e.g. reverberation).
Enjoying Surround Sound
by Using Sound Field
You can take advantage of surround sound
simply by selecting one of the system’s pre-
programmed sound fields. They bring exciting
and powerful sound of movie theaters into your
home.
However, if there are no low frequency signals
(Dolby Digital LFE, etc.), it will generate a low
frequency signal for output to the subwoofer.
Outputting the sound from
multiple speakers
SOUND
FIELD
x AUTO FORMAT DIRECT MULTI
This mode lets you enjoy audio playback of all
types of discs from multiple speakers.
Note
• The sound is not output from multiple speakers
depending on the source.
Outputting 2 channel sources
like CDs by 5.1channel
Press SOUND FIELD.
x Dolby Pro Logic
Press SOUND FIELD repeatedly until the sound
field you want appears in the front panel display.
Dolby Pro Logic produces five output channels
from 2 channel sources. This mode performs Pro
Logic decoding to the input signal and output to
front, center, and surround speakers.
Meanwhile, the surround channel becomes
monaural.
All sound field
Sound field
Display
AUTO FORMAT DIRECT A.F.D. STD
STANDARD
x Dolby Pro Logic II MOVIE/MUSIC
Dolby Pro Logic II produces five full-bandwidth
output channels from 2 channel sources. This is
done using an advanced, high-purity matrix
surround decoder that extracts the spatial
properties of the original recording without
adding any new sounds or tonal colorations.
AUTO FORMAT DIRECT A.F.D. MULTI
MULTI
Dolby Pro Logic
PRO LOGIC
Dolby Pro Logic II MOVIE PLII MOVIE
Dolby Pro Logic II MUSIC PLII MUSIC
2 CHANNEL STEREO
2CH STEREO
Note
• When the input signal is multi channel source, Dolby
Pro Logic and Dolby Pro Logic II MOVIE/MUSIC
are canceled and the multi channel source is output
directly.
GB
22
Download from Www.Somanuals.com. All Manuals Search And Download.
• When the bilingual broadcast sound is input, Dolby
Pro Logic and Dolby Pro Logic II MOVIE/MUSIC
are not effective.
Using only the front speaker
and subwoofer
x 2 CHANNEL STEREO
This mode outputs the sound from the front left
and right speakers and subwoofer. Standard 2
channel (stereo) sources completely bypass the
sound field processing. Multi channel surround
formats are downmixed to two channels.
This allows you to play any source using only
the front left and right speakers and subwoofer.
To turn the surround effect off
Press SOUND FIELD repeatedly until “A.F.D.
STD” or “2CH STEREO” appears in the front
panel display.
GB
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Opposite direction
×2b t 1m t 2m t 3m
Various Functions for Playing Discs
Searching for a Particular
Point on a Disc
3m (DVD VIDEO/DVD-VR mode/DivX video*/
VIDEO CD only)
×2b (DVD VIDEO only)
(Scan, Slow-motion Play, Freeze
Frame)
* Except for United Kingdom and North American
models.
With each press, playback speed becomes faster.
You can quickly locate a particular point on a
disc by monitoring the picture or playing back
slowly.
Watching frame by frame
(Slow-motion Play)
(DVD VIDEO, DVD-R, DVD-RW, DivX
video*, VIDEO CD only)
Note
• Depending on the DVD/DivX video*/VIDEO CD,
you may not be able to do some of the operations
described.
* Except for United Kingdom and North American
models.
Press /m or M/ when the system is in
pause mode. To return to normal playback
speed, press H. Each time you press /m or
M/ during Slow-motion Play, the playback
speed changes. Two speeds are available. With
each press the indication changes as follows:
* Except for United Kingdom and North American
models.
Locating a point quickly by
playing a disc in fast forward
or fast reverse (Scan)
(Except for JPEG)
Playback direction
2
y 1
Opposite direction (DVD VIDEO only)
y 1
Press /m or M/ while playing a disc.
When you find the point you want, press H to
2
return to normal speed. Each time you press
m or M/ during scan, the playback speed
changes. With each press the indication changes
as shown below. Actual speeds may differ with
some discs.
/
Playing one frame at a time
(Freeze Frame)
(DVD VIDEO, DVD-R, DVD-RW, DivX
video*, VIDEO CD only)
Playback direction
* Except for United Kingdom and North American
models.
×2B t 1M t 2M t 3M
When the system is in the pause mode, press
(step) to go to the next frame. Press
(step) to go to the preceding frame
(DVD VIDEO/DVD-R/DVD-RW only). To
return to normal playback, press H.
3M (DVD VIDEO/DVD-VR mode/DivX video*/
VIDEO CD only)
×2B (DVD VIDEO/CD only)
* Except for United Kingdom and North American
models.
Note
• You cannot search for a still picture on a DVD-R/
DVD-RW in VR mode.
• For DATA CDs/DATA DVDs, this function works
only for DivX video files (except for United
Kingdom and North American models).
GB
24
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Press
.
[** (**)] changes to [– – (**)].
Searching for a Title/
Chapter/Track/Scene,
etc.
(
(
)
)
1 2 2 7
3 4
1 : 3 2 : 5 5
DVD VIDEO
T
You can search a DVD by title or chapter, and
you can search a VIDEO CD/CD/DATA CD/
DATA DVD by track, index, or scene. As titles
and tracks are assigned unique numbers on the
disc, you can select the desired one by entering
its number. Or, you can search for a scene using
the time code.
4
5
Press X/x or the number buttons to
select the title, chapter, track, index,
scene, etc., number you want to search
for.
If you make a mistake
Cancel the number by pressing CLEAR,
then select another number.
1
Press
DATA CD/DATA DVD with JPEG image
files, press DISPLAY twice.)
DISPLAY. (When playing a
Press
.
The Control Menu display appears.
The system starts playback from the
selected number.
2
Press X/x to select the search method.
The display will show different items
depending on the disc.
To search for a scene using the
time code (DVD VIDEO and
DVD-VR mode only)
[TITLE], [TRACK], [SCENE]
[CHAPTER], [INDEX]
[TIME/TEXT]
1 In Step 2, select
[TIME/TEXT].
[T **:**:**] (playing time of the current title)
is selected.
Select [TIME/TEXT] to search for a
starting point by inputting the time code.
2 Press
.
[TRACK]
[ALBUM]
[FILE]
[T **:**:**] changes to [T --:--:--].
3 Input the time code using the number
buttons, then press
.
For example, to find the scene at 2 hours, 10
minutes, and 20 seconds after the beginning,
just enter [2:10:20].
Example: when you select
[CHAPTER]
[** (**)] is selected (** refers to a number).
The number in parentheses indicates the
total number of titles, chapters, tracks,
indexes, scenes, albums or files.
Tip
• When the Control Menu display is turned off, you can
search for a chapter (DVD VIDEO/DVD-R/DVD-
RW), track (VIDEO CD/CD), or file* (DATA CD/
DATA DVD (DivX video)) by pressing the number
(
(
)
)
1 2 2 7
1 8 3 4
buttons and
.
DVD VIDEO
T
1 : 3 2 : 5 5
* Except for United Kingdom and North American
models.
Note
• You cannot search for a scene on a DVD+RW using
the time code.
Selected row
GB
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching by Scene
(Picture Navigation)
Resuming Playback from
the Point Where You
Stopped the Disc
(Resume Play)
You can divide the TV screen into 9 subscreens
and find the desired scene quickly.
1
2
3
Press PICTURE NAVI during playback.
The following display appears.
When you stop the disc, the system remembers
the point where you pressed x and “RESUME”
appears in the front panel display. As long as
you do not remove the disc, Resume Play will
work even if the system enters standby mode by
pressing "/1.
ENTER
CHAPTER VIEWER
Press PICTURE NAVI repeatedly to
select an item.
1
While playing a disc, press x to stop
playback.
• [TITLE VIEWER] (DVD VIDEO only)
• [CHAPTER VIEWER] (DVD VIDEO
only)
“RESUME” appears in the front panel
display.
If “RESUME” does not appear, Resume
Play is not available.
• [TRACK VIEWER] (VIDEO CD/
Super VCD only)
2
Press H.
Press
.
The system starts playback from the point
where you stopped the disc in Step 1.
The first scene of each title, chapter, or
track appears as follows.
Note
• Depending on where you stop the disc, the system
may not resume playback from exactly the same
point.
• The point where you stopped playing may be cleared
when:
– you eject the disc.
– the system enters standby mode (DATA CD/
DATA DVD only).
1
4
7
2
5
8
3
6
9
– you change or reset the settings on the Setup
Display.
4
Press C/X/x/c to select a title, chapter,
or track, and press
– you change the parental control level.
– you change the function by pressing FUNCTION.
– you disconnect the AC power cord (mains lead).
• For DVD-Rs/DVD-RWs in VR mode, VIDEO CDs,
CDs, DATA CDs, and DATA DVDs, the system
remembers the resume playback point for the current
disc.
.
The system starts playback from the
selected scene.
To return to normal play during
setting
Press O RETURN.
• Resume Play does not work during Program Play and
Shuffle Play.
• This function may not work properly with some
discs.
Note
• Depending on the disc, you may not be able to select
some items.
Tip
• To play from the beginning of the disc, press x twice,
then press H.
GB
26
Download from Www.Somanuals.com. All Manuals Search And Download.
To enjoy a disc that is played
before by resume playback
(Multi-disc Resume)
Creating Your Own
Program
(DVD VIDEO, VIDEO CD only)
(Program Play)
This system stores the point where you stopped
the disc for up to 40 discs and resumes playback
the next time you insert the same disc. If you
store a resume playback point for the 41st disc,
the resume playback point for the first disc is
deleted.
To activate this function, set [MULTI-DISC
RESUME] in [CUSTOM SETUP] to [ON]. For
details, see “[MULTI-DISC RESUME] (DVD
You can play the contents of a disc in the order
you want by arranging the order of the tracks on
the disc to create your own program. You can
program up to 99 tracks.
1
2
Press
DISPLAY.
The Control Menu display appears.
Press X/x to select
[PROGRAM], then press
.
Tip
• To play from the beginning of the disc, press x twice,
then press H.
The options for [PROGRAM] appear.
6 (14)
2 : 5 0
CD
Note
T
• If [MULTI-DISC RESUME] in [CUSTOM SETUP]
when you change the function by pressing
FUNCTION.
OFF
OFF
SET
ON
3
Press X/x to select [SET t], then
press
.
[TRACK] is displayed when you play a
VIDEO CD or CD.
PROGRAM
0:00:00
T
ALL CLEAR
1. TRACK
– –
– –
2. TRACK
3. TRACK
4. TRACK
5. TRACK
6. TRACK
7. TRACK
01
02
03
04
05
06
– –
– –
– –
– –
– –
Tracks recorded
on a disc
Total time of the
programmed tracks
continued
GB
27
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
Press c.
To change or cancel a program
The cursor moves to the track row [T] (in
this case, [01]).
2 Select the program number of the track you
PROGRAM
ALL CLEAR
1. TRACK
2. TRACK
3. TRACK
4. TRACK
5. TRACK
6. TRACK
7. TRACK
0:00:00
T
want to change or cancel using X/x.
– –
– –
01
02
03
04
05
06
If you want to delete the track from the
program, press CLEAR.
– –
– –
– –
– –
– –
– –
3 Follow Step 5 for new programming.
To cancel a program, select [--] under [T],
then press
.
Select the track you want to program.
For example, select track [02].
To cancel all of the tracks in the
programmed order
Press X/x to select [02] under [T], then
press
.
2 Press X and select [ALL CLEAR].
Selected track
3 Press
.
0:15:30
T
PROGRAM
ALL CLEAR
1. TRACK
2. TRACK
3. TRACK
4. TRACK
5. TRACK
6. TRACK
7. TRACK
– –
01
02
03
04
05
06
0 2
– –
– –
– –
– –
– –
– –
Total time of the programmed tracks
6
7
To program other tracks, repeat steps 4
to 5.
The programmed tracks are displayed in the
selected order.
Press H to start Program Play.
Program Play starts.
When the program ends, you can restart the
same program again by pressing H.
To return to normal play
In Step 3, press CLEAR or select [OFF]. To play
the same program again, select [ON] in Step 3
and press
.
To turn off the Control Menu
display
Press
DISPLAY repeatedly until the Control
Menu display is turned off.
GB
28
Download from Www.Somanuals.com. All Manuals Search And Download.
To return to normal play
Playing in Random Order
In Step 3, press CLEAR or select [OFF].
(Shuffle Play)
To turn off the Control Menu
display
Press
DISPLAY repeatedly until the Control
You can have the system “shuffle” tracks.
Subsequent “shuffling” may produce a different
playing order.
Menu display is turned off.
Note
• You cannot use this function with VIDEO CDs and
Super VCDs with PBC playback.
Note
• Same song may be played repeatedly during MP3
playback.
1
2
Press
The Control Menu display appears.
Press X/x to select [SHUFFLE],
then press
The options for [SHUFFLE] appear.
DISPLAY during playback.
.
6 (14)
2 : 5 0
CD
T
OFF
OFF
TRACK
3
Press X/x to select the item to be
shuffled.
x When playing a VIDEO CD or CD
• [TRACK]: shuffles tracks on the disc.
x When Program Play is activated
• [ON]: shuffles tracks selected in Program
Play.
x When playing a DATA CD (except for
DivX*) or DATA DVD (except for DivX*)
• [ON (MP3)]: shuffles MP3 audio tracks in
the album on the current disc. When no
album is selected, the first album will play
in random order.
* Except for United Kingdom and North
American models.
Note
• A track already played is also selected in
random order.
4
Press
.
Shuffle Play starts.
GB
29
Download from Www.Somanuals.com. All Manuals Search And Download.
• [TRACK] (MP3 audio tracks only):
repeats the current track.
Playing Repeatedly
(Repeat Play)
• [FILE] (DivX video files only): repeats
the current file.*
* Except for United Kingdom and North
American models.
4
Press
.
You can play all the titles, tracks or albums on a
disc or a single title, chapter, track, or album
repeatedly.
The item is selected.
To return to normal play
You can use a combination of Shuffle or
Program Play modes.
In Step 3, press CLEAR or select [OFF].
To turn off the Control Menu
display
1
2
Press
The Control Menu display appears.
Press X/x to select [REPEAT],
then press
The options for [REPEAT] appear.
DISPLAY during playback.
Press
DISPLAY repeatedly until the Control
Menu display is turned off.
.
Note
• You cannot use this function with VIDEO CDs and
Super VCDs with PBC playback.
6 (14)
2 : 5 0
CD
T
• When playing a DATA CD/DATA DVD which
contains MP3 audio track and JPEG image files, and
their playing time is not the same, the audio sound
will not match the image.
OFF
OFF
DISC
TRACK
• When [MODE (MP3, JPEG)] is set to [IMAGE
3
Press X/x to select the item to be
repeated.
The default setting is underlined.
x When playing a DVD VIDEO or DVD-
VR
• [OFF]: does not play repeatedly.
• [DISC]: repeats all of the titles on the disc.
• [TITLE]: repeats the current title on a
disc.
• [CHAPTER]: repeats the current chapter.
x When playing a VIDEO CD or CD
• [OFF]: does not play repeatedly.
• [DISC]: repeats all of the tracks on the
disc.
• [TRACK]: repeats the current track.
x When playing a DATA CD or DATA
DVD
• [OFF]: does not play repeatedly.
• [DISC]: repeats all of the albums on the
disc.
• [ALBUM]: repeats the current album.
GB
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the DVD’s Menu
Changing the Sound
A DVD is divided into a lot of sections, which
make up a picture or music feature. These
sections are called “titles.” When you play a
DVD which contains several titles, you can
select the title you want using DVD TOP
MENU.
When you play DVDs that allow you to select
items such as the language for the subtitles and
the language for the sound, select these items
using DVD MENU.
When playing a DVD VIDEO or DATA CD/
DATA DVD (DivX video files*) recorded in
multiple audio formats (PCM, Dolby Digital,
MPEG audio, or DTS), you can change the
audio format. If the DVD VIDEO is recorded
with multilingual tracks, you can also change the
language.
With VIDEO CDs, CDs, DATA CDs, or DATA
DVDs, you can select the sound from the right or
left channel and listen to the sound of the
selected channel through both the right and left
speakers.
1
Press DVD TOP MENU or DVD MENU.
The disc’s menu appears on the TV screen.
The contents of the menu vary from disc to
disc.
* Except for United Kingdom and North American
models.
2
3
Press C/X/x/c or the number buttons to
select the item you want to play or
change.
1
Press AUDIO during playback.
The following display appears.
Press
.
:
1
ENGLISH DOLBY DIGITAL 3/2.1
2
Press AUDIO repeatedly to select the
desired audio signal.
x When playing a DVD VIDEO
Depending on the DVD VIDEO, the choice
of language varies.
When four digits are displayed, they
indicate a language code. Refer to
which language the code represents. When
the same language is displayed two or more
times, the DVD VIDEO is recorded in
multiple audio formats.
x When playing a DVD-VR
The types of sound tracks recorded on a disc
are displayed. The default setting is
underlined.
Example:
• [1: MAIN] (main sound)
• [1: SUB] (sub sound)
• [1: MAIN+SUB] (main and sub sound)
continued
GB
31
Download from Www.Somanuals.com. All Manuals Search And Download.
• [2: MAIN]
Checking the audio signal
format
• [2: SUB]
• [2: MAIN+SUB]
(DVD, DivX video* only)
Note
* Except for United Kingdom and North American
models.
• [2: MAIN], [2: SUB], and [2: MAIN+SUB] do
not appear when one audio stream is recorded on
the disc.
If you press AUDIO repeatedly during
playback, the format of the current audio signal
(PCM, Dolby Digital, DTS, etc.) appears as
shown below.
x When playing a VIDEO CD, CD, DATA
CD (MP3 audio), or DATA DVD (MP3
audio)
The default setting is underlined.
x When playing a DVD
• [STEREO]: the standard stereo sound
• [1/L]: the sound of the left channel
(monaural)
Example:
Dolby Digital 5.1 ch
• [2/R]: the sound of the right channel
(monaural)
LFE (Low
Frequency Effect)
Surround (L/R)
:
x When playing a DATA CD (DivX
video) or DATA DVD (DivX video)
(except for United Kingdom and North
American models)
The choice of DATA CD or DATA DVD
audio signal formats differ, depending on
the DivX video file contained on the disc.
The format is shown in the display.
3 / 2 .1
ENGLISH DOLBY DIGITAL
1
L
C
R
Front (L/R) +
Center
LFE
LS
RS
Currently playing
program format
x When playing a Super VCD
The default setting is underlined.
• [1:STEREO]: the stereo sound of the
audio track 1
Example:
Dolby Digital 3 ch
Surround
(Monaural)
• [1:1/L]: the sound of the left channel of
the audio track 1 (monaural)
Front (L/R)
• [1:2/R]: the sound of the right channel of
the audio track 1 (monaural)
:
2 / 1
2 SPANISH DOLBY DIGITAL
• [2:STEREO]: the stereo sound of the
audio track 2
L
R
S
• [2:1/L]: the sound of the left channel of
the audio track 2 (monaural)
Currently playing
program format
• [2:2/R]: the sound of the right channel of
the audio track 2 (monaural)
Note
• While playing a Super VCD on which the audio track
2 is not recorded, no sound will come out when you
select [2:STEREO], [2:1/L], or [2:2/R].
GB
32
Download from Www.Somanuals.com. All Manuals Search And Download.
x When playing a DATA CD (DivX video) or
DATA DVD (DivX video) (except for United
Kingdom and North American models)
Selecting [ORIGINAL] or
[PLAY LIST] on a DVD-R/
DVD-RW
Example:
MP3 audio
1: MP3 128k
Some DVD-Rs/DVD-RWs in VR (Video
Recording) mode have two types of titles for
playback: originally recorded titles
([ORIGINAL]) and titles that can be created on
recordable DVD players for editing ([PLAY
LIST]). You can select the type of title to be
played.
Bit rate
About audio signals
Audio signals recorded in a disc contain the
sound elements (channels) shown below. Each
channel is output from a separate speaker.
• Front (L)
1
Press
in stop mode.
DISPLAY when the system is
• Front (R)
The Control Menu display appears.
• Center
2
Press X/x to select
PLAY LIST], then press
[ORIGINAL/
.
• Surround (L)
• Surround (R)
The options for [ORIGINAL/PLAY LIST]
appear.
• Surround (Monaural): This signal can be either
the Dolby Surround Sound processed signals
or the Dolby Digital sound’s monaural
Surround audio signals.
(
3
)
1
T
4 4
(
)
2 8
1 : 3 0 : 5 0
DVD-VR
• LFE (Low Frequency Effect) signal
PLAY LIST
PLAY LIST
ORIGINAL
3
4
Press X/x to select a setting.
The default setting is underlined.
• [PLAY LIST]: plays the titles created
from [ORIGINAL] for editing.
• [ORIGINAL]: plays the titles originally
recorded.
Press
.
GB
33
Download from Www.Somanuals.com. All Manuals Search And Download.
When playing a VIDEO CD
ViewingInformationAbout
the Disc
(without PBC functions) or CD
1 Playing time of the current track
2 Remaining time of the current track
3 Playing time of the disc
4 Remaining time of the disc
5 Disc name
6 Track and index*
* VIDEO CD only.
Viewing the playing time and
remaining time in the front
panel display
When playing a DATA CD (MP3
audio) or DATA DVD (MP3 audio)
You can check disc information, such as the
remaining time, total number of titles in a DVD,
tracks in a VIDEO CD, CD, MP3, or file name
of a DivX video* using the front panel display
1 Playing time and current track number
2 Track (file) name
Tip
• When playing VIDEO CDs with PBC functions, the
playing time is displayed.
* Except for United Kingdom and North American
Note
models.
• The system can only display the first level of the
DVD/CD text, such as the disc name or title.
• If an MP3 file name cannot be displayed, “*” will
appear in the front panel display instead.
• The disc name or track name may not be displayed
depending on the text.
Press DISPLAY.
Each time you press DISPLAY while playing
the disc, the display changes 1 t 2 t ...
t 1 t ...
Some displayed items may disappear after a few
• Playing time of MP3 audio tracks and DivX video
files* may not be displayed correctly.
* Except for United Kingdom and North American
models.
seconds.
When playing a DVD VIDEO or
DVD-R/DVD-RW
1 Playing time and number of the current title
2 Remaining time of the current title
3 Playing time and number of the current
chapter
Checking the playing time and
remaining time
4 Remaining time of the current chapter
5 Disc name
6 Title and chapter
You can check the playing time and remaining
time of the current title, chapter, or track, and the
total playing time or remaining time of the disc.
You can also check the DVD text and MP3
folder name/file name recorded in the disc.
When playing a DATA CD (DivX
video) or DATA DVD (DivX video)
(Except for United Kingdom and
North American models)
1
Press DISPLAY during playback.
The following display appears.
1 Playing time of the current file
2 Current file name
T
1:01:57
3 Current album and file number
Time information
GB
34
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Press DISPLAY repeatedly to change
the time information.
Checking the play information
of the disc
The display and the kinds of time that you
can check depend on the disc you are
playing.
To check DVD/CD text
Press DISPLAY repeatedly in Step 2 to display
text recorded in the DVD/CD.
The DVD/CD text appears only when text is
recorded in the disc. You cannot change the text.
If the disc does not contain text, “NO TEXT”
appears.
x When playing a DVD VIDEO or DVD-
RW
• T **:**:**
Playing time of the current title
• T–**:**:**
Remaining time of the current title
• C **:**:**
Playing time of the current chapter
• C–**:**:**
Remaining time of the current chapter
BRAHMS SYMPHONY
x When playing a VIDEO CD (with PBC
functions)
To check DATA CD/DATA DVD
• **:**
(MP3 audio/DivX video*) text
Playing time of the current scene
By pressing DISPLAY while playing MP3
audio tracks on a DATA CD/DATA DVD or
DivX video files* on a DATA CD/DATA DVD,
you can display the name of the album/track/file,
and the audio bit rate (the amount of data per
second of the current audio) on your TV screen.
x When playing a VIDEO CD (without
PBC functions) or CD
• T **:**
Playing time of the current track
• T–**:**
Remaining time of the current track
Bit rate**
• D **:**
Playing time of the current disc
• D–**:**
T
17:30 128k
Remaining time of the current disc
x When playing a DATA CD (MP3
audio) or DATA DVD (MP3 audio)
• T **:**
Playing time of the current track
JAZZ
RIVER SIDE
x When playing a DATA CD (DivX
video) or DATA DVD (DivX video)
(Except for United Kingdom and North
American models)
Album name
Track/file* name
* Except for United Kingdom and North American
models.
• **:**:**
**Appears when:
Playing time of the current file
– playing an MP3 audio track on DATA CDs/DATA
DVDs.
Note
• Characters/marks may not be displayed for some
languages.
– playing a DivX video file that contains MP3 audio
signals on DATA CDs/DATA DVDs (except for
United Kingdom and North American models).
• Depending on the type of disc being played, the
system can only display a limited number of
characters. Also, depending on the disc, not all text
characters will be displayed.
continued
GB
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking the date
information
Changing the Angles
(JPEG only)
You can check the date information during
playback when the Exif* tag is recorded in the
JPEG image data.
If various angles (multi-angles) for a scene are
recorded on a DVD VIDEO, you can change the
viewing angle.
Press
DISPLAY twice during playback.
Press ANGLE during playback.
The Control Menu display appears.
Each time you press ANGLE, the angle changes.
(
(
)
1
1
8
Note
)
2 0
DATA CD JPEG
• Depending on the DVD VIDEO, you may not be able
to change the angle even if multi-angles are recorded
on the DVD VIDEO.
31/ 01/ 2007
Date information
* “Exchangeable Image File Format” is a digital
camera image format defined by the Japan
Electronics and Information Technology Industries
Association (JEITA).
Tip
• Date information is [DD/MM/YYYY].
DD: Day
MM: Month
YYYY: Year
GB
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying the Subtitles
Adjusting the Delay
Between the Picture and
Sound
*
*
* Except for United Kingdom and North American
models.
(A/V SYNC)
If subtitles are recorded on a disc, you can turn
the subtitles on or off while playing. If
multilingual subtitles are recorded on the disc,
you can change the subtitle language while
playing, or turn the subtitles on or off whenever
you want.
*
*
* Except for United Kingdom and North American
models.
When the sound does not match the pictures on
the TV screen, you can adjust the delay between
the picture and sound.
Press SUBTITLE during playback.
Each time you press SUBTITLE, the subtitle
language changes.
1
2
Press
The Control Menu display appears.
Press X/x to select [A/V SYNC],
then press
The options for [A/V SYNC] appear.
DISPLAY.
Note
• Depending on the DVD VIDEO, you may not be able
to change the subtitles even if multilingual subtitles
are recorded on it. You also may not be able to turn
them off.
.
(
(
)
)
1
1
T
1 2
2 8
• You can change the subtitles if the DivX video file
has an “.AVI” or “.DIVX” extension and contains
subtitle information within the same file (except for
United Kingdom and North American models).
DVD VIDEO
0 : 0 0 : 0 2
OFF
OFF
ON
3
Press X/x to select a setting.
The default setting is underlined.
• [OFF]: does not adjust.
• [ON]: adjusts the difference between
picture and sound.
4
Press
.
Note
• Depending on the input stream, this function may not
be effective.
GB
37
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3 audio track or JPEG
image file that the system can
play
About MP3 Audio Tracks
and JPEG Image Files
You can play the MP3 audio tracks or JPEG
image files:
• which have the extension “.MP3” (MP3 audio
track) or “.JPG”/“.JPEG” (JPEG image file)
What is MP3/JPEG?
• which conform to the DCF* image file format
* “Design rule for Camera File system”: Image
standards for digital cameras regulated by Japan
Electronics and Information Technology Industries
Association (JEITA).
MP3 is audio compression technology that
satisfies the ISO/MPEG regulations. JPEG is
image compression technology.
Discs that the system can
play
Note
• The system will play any data with the
extension “.MP3,” “.JPG,” or “.JPEG” even if
they are not in MP3 or JPEG format. Playing
this data may generate a loud noise which
could damage your speaker system.
• The system does not conform to audio in
MP3PRO format.
You can play back DATA CDs (CD-ROMs/CD-
Rs/CD-RWs) or DATA DVDs (DVD-Rs/DVD-
RWs/DVD+Rs/DVD+RWs/DVD-ROMs)
recorded in MP3 (MPEG1 Audio Layer 3) or
JPEG format. However, the DATA CDs must be
recorded according to ISO 9660 Level 1, Level
2 or Joliet format and DATA DVDs of Universal
Disk Format (UDF) for the system to recognize
the tracks (or files). You can also play discs
recorded in Multi Session.
See the operating instructions supplied with the
CD-R/CD-RW or DVD-R/DVD-RW drives and
the recording software (not supplied) for details
on the recording format.
About the Multi-Session disc
If MP3 audio tracks or JPEG image files are
recorded in the first session, the system will also
play MP3 audio tracks or JPEG image files in
other sessions. If audio tracks and images in
audio CD format or video CD format are
recorded in the first session, only the first
session will be played back.
Note
• The system may not be able to play some DATA
CDs/DATA DVDs created in the Packet Write
format.
GB
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
Playback order of MP3 audio
tracks or JPEG image files
• If you add numbers (01, 02, 03, etc.) to the front of the
track (or file) names when you store the tracks (or
files) in a disc, the tracks (or files) will be played in
that order.
The playback order of MP3 audio tracks or
JPEG image files recorded on a DATA CD or
DATA DVD is as follows:
• A disc with many trees takes longer to start playback.
Note
x Structure of disc contents
• Playback order may differ from the illustration
depending on the software you use to create the
DATA CD or DATA DVD, or if there are more than
200 albums and 300 files in each album.
• The system can recognize up to 200 albums, and will
not play any albums beyond the 200th.
• The system may take longer time to playback, when
progressing to the following album or jump to other
album.
Tree 1
Tree 2
Tree 3
Tree 4
Tree 5
• Some type of JPEG files cannot be played.
Track (MP3 audio) or
File (JPEG image)
Album
When you insert a DATA CD or DATA DVD
and press H, the numbered tracks (or files) are
played sequentially, from 1 through 7. Any
sub-albums/tracks (or files) contained within a
currently selected album take priority over the
next album in the same tree. (Example: C
contains D so 4 is played before 5.)
When you press DVD MENU and the list of
names are arranged in the following order:
A t B t C t D t F t G. Albums
that do not contain tracks (or files) (such as
album E) do not appear in the list.
GB
39
Download from Www.Somanuals.com. All Manuals Search And Download.
To stop playback
Playing DATA CDs or
DATA DVDs with MP3
Audio Tracks and JPEG
Image Files
Press x.
To play the next or previous MP3
audio track
Press ./>. Note that you can select the
next album by continuing to press > after the
last track on the current album, but that you
cannot return to the previous album by pressing
.. To return to the previous album, select the
album from the album list.
Selecting an MP3 audio track
or album
To return to the previous display
Press O RETURN.
1
Load a DATA CD or DATA DVD.
To turn off the display
The albums recorded on the DATA CD or
DATA DVD appear. When an album is
being played, its title is shaded.
Press DVD MENU.
Selecting a JPEG image file or
album
(
)
3
3 0
R O C K B E S T H I T
K A R A O K E
M Y F A V O U R I T E S O N G
R & B
1
Load a DATA CD or DATA DVD.
The albums recorded on the DATA CD or
DATA DVD appear. When an album is
being played, its title is shaded.
J A Z Z
C L A S S I C
S A L S A O F C U B A
B O S S A N O V A
(
)
3
3 0
2
Press X/x to select an album.
R O C K B E S T H I T
K A R A O K E
M Y F A V O U R I T E S O N G
R & B
J A Z Z
C L A S S I C
S A L S A O F C U B A
B O S S A N O V A
x When selecting an album
Press H to start playing the selected
album.
x When selecting a track
Press
.
The list of tracks contained in the album
appears.
M Y F A V O U R I T E S O N G
(
)
1
2 5 6
W A L T Z F O R D E B B Y
M Y R O M A N C E
M I L E S T O N E S
M Y F U N N Y V A L E N T I N E
A U T U M N L E A V E S
A L L B L U E S
S O M E D A Y M Y P R I N C E W...
Press X/x to select a track and press
.
The selected track starts playing. You can
turn the track list off by pressing DVD
MENU. Pressing DVD MENU again will
display the album list.
GB
40
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Press X/x to select an album.
To rotate a JPEG image
When a JPEG image file is displayed on the TV
screen, you can rotate the image by 90 degrees.
Press X/x while viewing an image. Each time
you press X, the image rotates counterclockwise
by 90 degrees.
x When selecting an album
Press H to start playing the selected
album.
x When selecting an image
Press PICTURE NAVI.
Images of files in the album appear in 16
subscreens.
Example of when you press X once:
Rotating direction
1
2
3
4
5
6
7
8
9
10
14
11
15
12
16
13
Press C/X/x/c to select the image you want
to view and press
Press CLEAR to return to normal view.
.
To stop playback
Press x.
Tip
• A scroll box is displayed at the right side of the TV
screen. To display the additional image files, select
the bottom image and press x. To return to the
previous image, select the top image and press X.
To play the next or previous JPEG
image file
Press C/c when the Control Menu display is not
displayed. Note that you can select the next
album by continuing to press c after the last
image on the current album, but that you cannot
return to the previous album by pressing C. To
return to the previous album, select the album
from the album list.
GB
41
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Press X/x to select the album you want
and press H.
Playing Audio Tracks and
Images as a Slide Show
with Sound
The system starts playing the selected
album.
You can turn the album list on and off by
pressing DVD MENU repeatedly.
Tip
• When you select [AUTO], the system can recognize
up to 300 MP3 tracks and 300 JPEG files in a single
album. When you select [AUDIO (MP3)] or [IMAGE
(JPEG)], the system can recognize up to 600 MP3 or
600 JPEG files in a single album. A maximum of 200
albums can be recognized regardless of the selected
mode.
You can play a slide show with sound by first
placing both MP3 and JPEG files in the same
album on a DATA CD or DATA DVD. When
you play back the DATA CD or DATA DVD,
select [AUTO] mode as explained below.
1
2
Load a DATA CD or DATA DVD.
Press DISPLAY when the system is
Note
• If you set [MODE (MP3, JPEG)] to [IMAGE
(JPEG)] on a disc that contains MP3 tracks only or
[AUDIO (MP3)] on a disc that contains JPEG files
only, you may not be able to change the [MODE
(MP3, JPEG)] setting.
in stop mode.
The Control Menu display appears.
3
Press X/x to select
(MP3, JPEG)], then press
[MODE
.
• PICTURE NAVI does not work when [AUDIO
(MP3)] is selected.
The options for [MODE (MP3, JPEG)]
appear.
• If you play large MP3 track data and JPEG image
data at the same time, the sound may skip. It is
recommended that you set the MP3 bit rate to 128
kbps or lower when creating the file. If the sound still
skips, then reduce the size of the JPEG file.
(
)
)
1 2 2 7
(
1 8 3 4
DATA CD MP3
T
1 : 3 2 : 5 5
AUTO
AUTO
AUDIO (MP3)
IMAGE (JPEG)
Specifying the slide show
duration
(JPEG only)
When you play JPEG image files using slide
show, you can specify the duration for slides to
appear on the TV screen.
4
Press X/x to select a setting.
The default setting is underlined.
• [AUTO]: plays both the JPEG image files
and MP3 audio tracks in the same album
as a slide show.
1
2
Press
DISPLAY twice.
The Control Menu display appears.
• [AUDIO (MP3)]: plays only MP3 audio
tracks continuously.
Press X/x to select
[INTERVAL], then press
.
• [IMAGE (JPEG)]: plays only JPEG
image files as a slide show.
The options for [INTERVAL] appear.
3 ( 12)
5
6
Press
.
1(
4)
DATA CD JPEG
2 9 / 1 0 / 2 0 0 7
NORMAL
NORMAL
FAST
SLOW1
SLOW2
Press DVD MENU.
The list of albums recorded on the DATA
CD or DATA DVD appears.
GB
42
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Press X/x to select a setting.
3
4
Press X/x to select a setting.
The default setting is underlined.
• [NORMAL]: sets the duration to about 6
to 9 seconds.
• [FAST]: sets the duration shorter than
[NORMAL].
The default setting is underlined.
• [MODE1]: The image sweeps in from top
to bottom.
• [MODE2]: The image stretches out from
left to right of the TV screen.
• [MODE3]: The image stretches out from
the center of the TV screen.
• [SLOW1]: sets the duration longer than
[NORMAL].
• [SLOW2]: sets the duration longer than
[SLOW1].
• [MODE4]: The images randomly cycle
through the effects.
• [MODE5]: The next image slides over the
previous image.
4
Press
.
Note
• [OFF]: turns off this function.
• Some JPEG files may take longer to display than
others, which may make the duration seems longer
than the option you selected. Especially progressive
JPEG files or JPEG files of 3,000,000 pixels or more.
Press
.
Selecting an effect for image
files in the slide show
(JPEG only)
When you play a JPEG image file, you can
select the effect to be used when viewing the
slide show.
1
2
Press
The Control Menu display appears.
Press X/x to select [EFFECT],
then press
DISPLAY twice.
.
The options for [EFFECT] appear.
3 ( 12)
1(
4)
DATA CD JPEG
2 3 / 1 0 / 2 0 0 7
MODE1
MODE1
MODE2
MODE3
MODE4
MODE5
OFF
GB
43
Download from Www.Somanuals.com. All Manuals Search And Download.
DivX video files that the system
can play
®
Enjoying DivX Videos
The system can play data that is recorded in
DivX format, and which has the extension
“.AVI,” or “.DIVX.” The system will not play
files with the extension “.AVI” or “.DIVX” if
they do not contain a DivX video.
(Except for United Kingdom and North
American models)
About DivX Video Files
Tip
• For details about playable MP3 audio tracks or JPEG
image files on DATA CDs or DATA DVDs, see
®
DivX is a video file compression technology,
developed by DivX, Inc. This product is an
®
official DivX Certified product.
Note
You can play DATA CDs and DATA DVDs that
• The system may not play a DivX video file when the
file has been combined from two or more DivX video
files.
®
contain DivX video files.
DATA CDs and DATA DVDs that
the system can play
• The system cannot play a DivX video file of size
more than 720 (width) x 576 (height) or 2GB.
• Depending on the DivX video file, sound may skip or
not match the pictures on the TV screen.
• The system cannot play some DivX video files that
are longer than 3 hours.
Playback of DATA CDs (CD-ROMs/CD-Rs/
CD-RWs) and DATA DVDs (DVD-ROMs/
DVD-Rs/DVD-RWs/DVD+Rs/DVD+RWs) on
this system is subject to certain conditions:
• Depending on the DivX video file, the picture may
pause or be unclear. In which case, it is recommended
that you create the file at a lower bit rate. If the sound
is still noisy, MP3 is the recommended audio format.
Note, however, this system does not conform to
WMA (Windows Media Audio) format.
• Because of the compression technology used for
DivX video files, it may take some time after you
press H for the picture to appear.
– With DATA CDs/DATA DVDs that contain
DivX video files in addition to MP3 audio
tracks or JPEG image files, the system plays
only the DivX video files.
However, this system only plays DATA CDs
whose logical format is ISO 9660 Level 1/Level
2 or Joliet, and DATA DVDs of Universal Disk
Format (UDF).
Refer to the operating instructions supplied with
the disc drives and the recording software (not
supplied) for details on the recording format.
Selecting an album
1
Press DVD MENU.
A list of albums on the disc appears. Only
albums that contain DivX video files are
listed.
About playback order of data on
DATA CDs or DATA DVDs
JPEG image files” (page 39). Note that the
playback order may not be applicable,
(
)
3
3
depending on the software used for creating the
DivX video file, or if there are more than 200
albums and 600 DivX video files in each album.
S U M M E R 2 0 0 3
N E W Y E A R ' S D A Y
M Y F A V O U R I T E S
Note
• The system may not be able to play some DATA
CDs/DATA DVDs created in the Packet Write
format.
2
Press X/x to select the album you want
to play.
GB
44
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Press H.
To play the next or previous DivX
video file without turning on the
above file list
The system starts playing the selected
album.
To select DivX video files, see “Selecting a
You can select the next or previous DivX video
file in the same album by pressing ./>.
You can also select the first file of the next
album by pressing > during playback of the
last file of the current album. Note that you
cannot return to the previous album by pressing
.. To return to the previous album, select it
from the album list.
To go to the next or previous
page
Press C/c.
To turn off the display
Press DVD MENU repeatedly.
Tip
To stop playback
• If the number of viewing times is preset, you can play
the DivX video files as many times as the preset
number. The following occurrences are counted:
Press x.
– when the system is turned off.
– when another file is played.
– when the disc tray is opened.
Selecting a DivX video file
1
press
.
The list of files in the album appears.
M Y F A V O U R I T E S
(
)
1
2
H A W A I I 2 0 0 4
V E N U S
2
Press X/x to select a file and press
.
The selected file starts playing.
To go to the next or previous
page
Press C/c.
To return to the previous display
Press O RETURN.
To stop playback
Press x.
GB
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing VIDEO CDs with
PBC Functions (Ver.2.0)
(PBC Playback)
With PBC (Playback Control) functions, you
can enjoy simple interactive operations, search
functions, and other such operations.
PBC playback allows you to play VIDEO CDs
interactively by following the menu on the TV
screen.
1
Start playing a VIDEO CD with PBC
functions.
The menu for your selection appears.
2
Select the item number you want by the
number buttons.
3
4
Press
.
Follow the instructions in the menu for
interactive operations.
Refer to the operating instructions supplied
with the disc, as the operating procedure
may differ depending on the VIDEO CD.
To go back to the menu
Press O RETURN.
Note
• Depending on the VIDEO CD, [Press ENTER] in
Step 3 may appear as [Press SELECT] in the
operating instructions supplied with the disc. In this
case, press H.
Tip
• To play without using PBC, press ./> or the
number buttons while the system is in stop mode to
select a track, then press H or
. The system starts
continuous play. You cannot play still pictures such
as a menu. To return to PBC playback, press x twice,
then press H.
GB
46
Download from Www.Somanuals.com. All Manuals Search And Download.
To change the preset number
Restart from Step 1.
Tuner Functions
Presetting Radio Stations
You can preset 20 FM stations, and 10 AM
stations. Before tuning, make sure to turn down
the volume to minimum.
1
Press FUNCTION repeatedly until
“TUNER FM” or “TUNER AM” appears
in the front panel display.
2
Press and hold TUNING + or – until the
auto scanning starts.
Scanning stops when the system tunes in a
station. “TUNED” and “ST” (for stereo
program) appear in the front panel display.
3
4
Press SYSTEM MENU.
Press X/x repeatedly until “MEMORY”
appears in the front panel display.
5
Press
or c.
A preset number appears in the front panel
display.
6
Press X/x to select the preset number
you want.
Tip
• You can select the preset number directly by
pressing the number buttons.
7
Press
.
The station is stored.
8
9
Repeat Steps 1 to 7 to store other
stations.
Press SYSTEM MENU.
The system menu turns off.
GB
47
Download from Www.Somanuals.com. All Manuals Search And Download.
If an FM program is noisy
Listening to the Radio
If an FM program is noisy, you can select
monaural reception. There will be no stereo
effect, but reception will improve.
Preset radio stations in the system’s memory
1 Press SYSTEM MENU.
1
Press FUNCTION repeatedly until
“TUNER FM” or “TUNER AM” appears
in the front panel display.
2 Press X/x repeatedly until “FM MODE”
appears in the front panel display.
The last received station is tuned in.
2
Press PRESET + or – repeatedly to
select the preset station.
3 Press
or c.
Each time you press the button, the system
tunes in one preset station.
4 Press X/x to select “MONO.”
The default setting is underlined.
• “STEREO”: stereo reception.
• “MONO”: monaural reception.
Tip
• You can select the preset station number directly
by pressing the number buttons.
5 Press
The setting is made.
.
3
Adjust the volume by pressing
VOLUME +/–.
6 Press SYSTEM MENU.
The system menu turns off.
To turn off the radio
Press "/1.
To listen to non-preset radio
stations
Naming preset stations
You can enter a name for preset stations. These
names (for example, “XYZ”) appear in the front
panel display when a station is selected.
Note that no more than one name can be entered
for each preset station.
Use manual or automatic tuning in Step 2.
For manual tuning, press TUNING + or –
repeatedly.
For automatic tuning, press and hold TUNING +
or –. The automatic tuning stops automatically
when the system receives the radio station. To
stop the automatic tuning manually, press
TUNING + or –.
Note
• You cannot enter a name for preset stations of the
1
Press FUNCTION repeatedly until
“TUNER FM” or “TUNER AM” appears
in the front panel display.
To listen to radio stations when
you know the frequencies
Use direct tuning in Step 2.
The last received station is tuned in.
1 Press D.TUNING.
2
Press PRESET + or – repeatedly to
select the preset station you want to
create an index name for.
2 Press the number buttons to select the
frequencies.
3 Press
.
3
4
Press SYSTEM MENU.
Tip
Press X/x repeatedly until “NAME IN”
appears in the front panel display.
• To improve reception, reorient the supplied antennas
(aerials).
5
Press
or c.
GB
48
Download from Www.Somanuals.com. All Manuals Search And Download.
6
7
Create a name by using the cursor
buttons.
Using the Radio Data
System (RDS)
Press X/x to select a character, then press c
to move the cursor to the next position.
Letters, numbers, and other symbols can be
input for a radio station.
What is the Radio Data
System?
If you make a mistake
Press C/c repeatedly until the character to
be changed flashes, then press X/x to select
the desired character.
To erase the character, press C/c
repeatedly until the character to be erased
flashes, then press CLEAR.
The Radio Data System (RDS) is a broadcasting
service that allows radio stations to send
additional information along with the regular
program signal. This tuner offers convenient
RDS features, such as station name display.
RDS is available only for FM stations.*
Press
.
Note
• RDS may not work properly if the station you are
tuned to is not transmitting the RDS signal properly,
or if the signal strength is weak.
“COMPLETE” appears in the front panel
display, and the station name is stored.
8
Press SYSTEM MENU.
* Not all FM stations provide RDS service, nor do
they provide the same type of services. If you are not
familiar with the RDS system, check with your local
radio stations for details on RDS services in your
area.
The system menu turns off.
Tip
• You can check the frequency by pressing DISPLAY
Receiving RDS broadcasts
Viewing the station name or
frequency in the front panel
display
Simply select a station from the FM band.
When you tune in a station that provides RDS
services, the station name* appears in the front
panel display.
* If an RDS broadcast is not received, the station
name may not appear in the front panel display.
When the system is set to “TUNER FM” or
“TUNER AM,” you can check the frequency
using the front panel display.
Press DISPLAY.
Each time you press DISPLAY, the display
changes as shown.
1 Station name*
2 Frequency**
* This is displayed if you have entered a name for a
preset station.
**Returns to the original display when several seconds
has elapsed.
GB
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the THEATRE SYNC
Function
Other Operations
Controlling the TV with the
Supplied Remote
THEATRE SYNC allows you to turn on your
Sony TV and this system, changes the system
mode to “DVD,” and then switches the TV’s
input source you set with one button push.
You can control your TV (Sony only) with the
supplied remote.
Preparing for the THEATRE
SYNC function
Controlling TVs with the
remote
Register the TV’s input source connected to this
system.
You can control the TV by using following
buttons.
Press and hold TV INPUT while entering the
code for the TV’s input source connected
to this unit (see the table) using the number
buttons.
By pressing
TV [/1
You can
Turn the TV on or off.
TV INPUT
Switch the TV’s input source
between the TV and other input
sources.
The TV’s input source is selected.
Set your TV’s input to the input you used to
connect the unit. For details, see the operating
instructions of your TV.
TV VOL +/–
TV CH +/–
Adjust the TV volume.
Select the TV channel.
Select the TV channel.
Number
buttons*,
ENTER*
By pressing Number
TV’s input source
TV INPUT
0
No input source
(Default)
DVD MENU*
C/X/x/c*,
Display the menu of the TV.
Select the item on the menu.
1
VIDEO1
*
2
VIDEO2
RETURN*
Return to the previous channel or
layer on the menu of the TV.
3
VIDEO3
4
VIDEO4
5
VIDEO5
* Use these buttons while pressing the TV button.
6
VIDEO6
- is for selecting a channel number greater than
10. (For example, for channel 25, press -, then
2 and 5.)
7
VIDEO7
8
VIDEO8
9*
COMPONENT 1
COMPONENT 2
COMPONENT 3
CLEAR*
Note
• Depending on the TV, you may not be able to control
your TV or to use some of the buttons above.
SYSTEM
MENU*
PICTURE
NAVI*
COMPONENT 4
* Except for North American models.
GB
50
Download from Www.Somanuals.com. All Manuals Search And Download.
OperatingtheTHEATRESYNC
function
Using the Sound Effect
Point the remote to the direction of TV and this
unit, then press THEATRE SYNC once.
Reinforcing bass frequencies
You can reinforce bass frequencies.
If this function does not work, change the
transmit time. The transmit time varies
depending on the TV.
Press DYNAMIC BASS.
Bass frequencies are effectively reinforced.
To change the transmit time
To turn off the sound effect
Press and hold TV CH + while entering the
code for transmit time (see the table) using
the number buttons.
Press DYNAMIC BASS again.
The transmit time from the remote is selected.
By pressing Number
Transmit time
TV CH +
1
2
3
4
5
6
7
8
0.5 (Default)
1
1.5
2
3
4
5
6
Note
• This function is only for Sony TVs. (This function
may not work on some Sony TVs.)
• If distance between TV and this unit is too far, this
function may not work. Install the unit near the TV.
• Keep the remote pointed in the direction of the TV
and this unit while entering the code.
GB
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Sleep Timer
Changing the Brightness
of the Front Panel Display
You can set the system to turn off at a preset
time, so you can fall asleep listening to music.
You can preset the time in 1 or 10-minutes
increments.
The brightness of the front panel display can be
set to either of 2 levels.
1
2
Press SYSTEM MENU.
1
2
Press SYSTEM MENU.
Press X/x repeatedly until “SLEEP”
appears in the front panel display, then
Press X/x repeatedly until “DIMMER”
appears in the front panel display, then
press
or c.
press
or c.
3
Press X/x to select a setting.
3
Press X/x to select the brightness of
the front panel display.
The minutes display (the remaining time)
changes as follows:
The default setting is underlined.
• “DIMMER OFF”: Bright.
• “DIMMER ON”: The front panel display
becomes dark.
SLEEP 90M y SLEEP 80M y SLEEP 70M
Y
Y
SLEEP OFF y SLEEP 10M ..... SLEEP 60M
4
5
Press
.
Tip
• You can select the remaining time by pressing
the number buttons. In this case, you can preset
the time in 1-minute increments.
The setting is made.
Press SYSTEM MENU.
The system menu turns off.
4
5
Press
.
The setting is made and “SLEEP” lights up
in the front panel display.
Press SYSTEM MENU.
The system menu turns off.
To change the remaining time
Restart from Step 1.
To cancel the Sleep Timer
function
Select “SLEEP OFF” in Step 3.
GB
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Deactivating the Buttons
on the Unit
(Child Lock)
You can deactivate the buttons on the unit
(except for "/1) for preventing misoperation,
such as child mischief (child lock function).
When the child lock function is activated, the
buttons on the unit are locked and “
up in the front panel display. (You can operate
the system by using the remote.)
” lights
Note
• When you operate the buttons on the unit while the
child lock function is on, “CHILD LOCK” appears in
the front panel display.
1
2
Press SYSTEM MENU.
Press X/x repeatedly until “CHILD
LOCK” appears in the front panel
display, then press
or c.
3
Press X/x to select a setting.
The default setting is underlined.
• “OFF”: Child lock function off.
• “ON”: Child lock function on.
4
5
Tip
Press
.
The setting is made.
Press SYSTEM MENU.
The system menu turns off.
• You can activate the child lock function by pressing
x for more than 5 seconds (“
” lights up in the
front panel display).
To cancel, press x for more than 5 seconds so that
“
” disappears from the front panel display.
GB
53
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Press X/x to select [ON t], then press
.
Advanced Settings and Adjustments
x If you have not entered a password
The display for registering a new password
appears.
Locking Discs
(CUSTOM PARENTAL CONTROL,
PARENTAL CONTROL)
PARENTAL CONTROL
Enter a new 4-digit password,
ENTER
You can set two kinds of playback restrictions
for the desired disc.
then press
.
• Custom Parental Control
You can set playback restrictions so that the
system will not play inappropriate discs.
• Parental Control
Enter a 4-digit password using the number
buttons, then press
.
Playback of some DVD VIDEOs can be
limited according to a predetermined level
such as the age of the users. Scenes may be
blocked or replaced with different scenes.
The same password is used for both Custom
Parental Control and Parental Control.
The display for confirming the password
appears.
x When you have already registered a
password
The display for entering the password
appears.
Preventing playback of
specific discs [CUSTOM
PARENTAL CONTROL]
PARENTAL CONTROL
Enter password, then press ENTER
.
You can set the same Custom Parental Control
password for up to 40 discs. When you set the
41st-disc, the first disc is canceled.
1
2
3
Insert the disc you want to lock.
5
Enter or re-enter your 4-digit password
using the number buttons, then press
.
If the disc is playing, press x to stop
playback.
Press
DISPLAY while the system is
[Custom parental control is set.] appears
and the TV screen returns to the Control
Menu display.
in stop mode.
The Control Menu display appears.
Press X/x to select
[PARENTAL CONTROL], then press
To turn off the Custom Parental
Control function
.
The options for [PARENTAL CONTROL]
appear.
(
)
)
1 2 2 7
2 Press X/x to select [OFF t], then press
(
1 8 3 4
DVD VIDEO
T
1 : 3 2 : 5 5
.
3 Enter your 4-digit password using the
number buttons, then press
.
OFF
ON
PLAYER
PASSWORD
GB
54
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Press X/x to select
[PARENTAL CONTROL], then press
To play a disc for which Custom
Parental Control is set
.
1 Insert the disc for which Custom Parental
The options for [PARENTAL CONTROL]
appear.
Control is set.
The [CUSTOM PARENTAL CONTROL]
display appears.
(
)
)
1 2 2 7
(
1 8 3 4
DVD VIDEO
T
1 : 3 2 : 5 5
CUSTOM PARENTAL CONTROL
Custom parental control is already
OFF
ON
PLAYER
PASSWORD
set. To play, enter your password
ENTER
and press
.
Press X/x to select [PLAYER t], then
press
.
2 Enter your 4-digit password using the
number buttons, then press
The system is ready for playback.
x If you have not entered a password
The display for registering a new password
appears.
.
Tip
• If you forget your password, enter the 6-digit number
“199703” using the number buttons when the
[CUSTOM PARENTAL CONTROL] display asks
PARENTAL CONTROL
Enter a new 4-digit password,
you for your password, then press
will ask you to enter a new 4-digit password.
. The display
ENTER
then press
.
Limiting playback for children
[PARENTAL CONTROL]
(DVD only)
Enter a 4-digit password using the number
buttons, then press
.
The display for confirming the password
appears.
Playback of some DVD VIDEOs can be limited
according to a predetermined level such as the
age of the users. The [PARENTAL CONTROL]
function allows you to set a playback limitation
level.
x When you have already registered a
password
The display for entering the password
appears.
1
Press
in stop mode.
DISPLAY while the system is
The Control Menu display appears.
PARENTAL CONTROL
Enter password, then press ENTER
.
continued
GB
55
Download from Www.Somanuals.com. All Manuals Search And Download.
4
5
Enter or re-enter your 4-digit password
using the number buttons, then press
.
8
Press X/x to select the level you want,
then press
.
Parental Control setting is complete.
The display for setting the playback
limitation level appears.
PARENTAL CONTROL
LEVEL:
4: PG13
USA
STANDARD:
PARENTAL CONTROL
LEVEL:
OFF
USA
STANDARD:
The lower the value, the stricter the
limitation.
To turn off the Parental Control
function
Press X/x to select [STANDARD], then
press
.
The selection items for [STANDARD] are
displayed.
Set [LEVEL] to [OFF] in Step 8.
To play a disc for which Parental
Control is set
PARENTAL CONTROL
1 Insert the disc and press H.
The display for entering your password
appears.
LEVEL:
OFF
USA
USA
STANDARD:
OTHERS
2 Enter your 4-digit password using the
number buttons, then press
.
The system starts playback.
6
7
Press X/x to select a geographic area
as the playback limitation level, then
Tip
• If you forget your password, remove the disc and
repeat steps 1 to 3 of “Preventing playback of specific
you are asked to enter your password, enter “199703”
press
.
The area is selected.
When you select [OTHERS t], select and
enter a standard code in the table of
(page 76) using the number buttons.
using the number buttons, then press
. The display
will ask you to enter a new 4-digit password. After
you enter a new 4-digit password, replace the disc in
the unit and press H. When the display for entering
your password appears, enter your new password.
Press X/x to select [LEVEL], then press
.
Note
The selection items for [LEVEL] are
displayed.
• When you play discs which do not have the Parental
Control function, playback cannot be limited on this
system.
• Depending on the disc, you may be asked to change
the parental control level while playing the disc. In
this case, enter your password, then change the level.
If the Resume Play mode is canceled, the level returns
to the previous level.
PARENTAL CONTROL
LEVEL:
OFF
OFF
STANDARD:
8:
7: NC17
6:
5:
R
GB
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the password
Getting Optimal Surround
Sound for a Room
1
Press
in stop mode.
DISPLAY while the system is
The Control Menu display appears.
(SPEAKER FORMATION)
2
Press X/x to select
[PARENTAL CONTROL], then press
Depending on the shape of the room, there will
be some speakers you cannot install. For the
better surround sound, it is recommended that
first you decide the position of the speakers.
.
The options for [PARENTAL CONTROL]
appear.
1
Press FUNCTION repeatedly until
“DVD” appears in the front panel
display.
3
Press X/x to select [PASSWORD t],
then press
.
The display for entering the password
appears.
2
Press
DISPLAY when the system is
in stop mode.
4
5
6
Enter your 4-digit password using the
The Control Menu display appears.
number buttons, then press
Enter a new 4-digit password using the
number buttons, then press
.
3
4
Press X/x to select
FORMATION], then press
[SPEAKER
.
.
To confirm your password, re-enter it
using the number buttons, then press
.
(
(
)
)
1
3
T
4 4
2 8
DVD VIDEO
0 : 0 3 : 0 4
SPEAKER FORMATION
SPEAKER FORMATION
If you make a mistake entering
your password
Press C before you press
correct number.
and input the
Press
.
The options for [SPEAKER
FORMATION] appear.
SPEAKER FORMATION
STANDARD
continued
GB
57
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Press C/c to select a setting.
• [ALL FRONT]: when installing all the
speakers in front of the listening position.
• [STANDARD]: when installing all the
speakers normally.
• [ALL FRONT - NO CENTER]: when
installing the front and surround speakers
in front of the listening position.
• [NO CENTER]: when installing the front
and surround speakers.
• [NO SURROUND]: when installing the
center and front speakers.
• [SECOND ROOM]: when installing the
front speakers in one room and surround
speakers in another.
• [FRONT ONLY]: when installing the
front speakers.
Note
• Speaker sound in the other room is the same as
that of the front and surround speakers.
6
Press
.
The setting is made.
Note
• The front panel display indicates the selected
[SPEAKER FORMATION]. It does not indicate the
speakers which output sound.
• When you change the [CONNECTION] setting in
[SPEAKER SETUP], the [SPEAKER
FORMATION] setting returns to [STANDARD].
GB
58
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Press X/x to select the setup item from
the displayed list: [LANGUAGE
SETUP], [SCREEN SETUP], [CUSTOM
SETUP], or [SPEAKER SETUP]. Then
Using the Setup Display
By using the Setup Display, you can make
various adjustments to items such as picture and
sound.
press
.
The Setup item is selected.
Example: [SCREEN SETUP]
For an overall list of Setup Display items, see
Selected item
Displayed items vary depending on the country
model.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
4:3 OUTPUT:
16:9
ON
Note
• Playback settings stored in the disc take priority over
the Setup Display settings and not all the functions
described may work.
JACKET PICTURE
FULL
1
Press FUNCTION repeatedly until
“DVD” appears in the front panel
display.
Setup items
6
7
Select an item using X/x, then press
2
Press
in stop mode.
DISPLAY when the system is
.
The options for the selected item appear.
Example: [TV TYPE]
The Control Menu display appears.
3
4
Press X/x to select
then press
The options for [SETUP] appear.
[SETUP],
.
SCREEN SETUP
16:9
16:9
4:3 LETTER BOX
4:3 PAN SCAN
TV TYPE:
SCREEN SAVER:
BACKGROUND:
4:3 OUTPUT:
(
(
)
)
1 2 2 7
1 8 3 4
DVD VIDEO
T
0 : 0 0 : 0 2
Options
QUICK
QUICK
CUSTOM
RESET
Select a setting using X/x, then press
.
The setting is selected and setup is
complete.
Press X/x to select [CUSTOM], then
press
.
The Setup Display appears.
SCREEN SETUP
TV TYPE:
4:3 LETTER BOX
ON
JACKET PICTURE
FULL
SCREEN SAVER:
BACKGROUND:
4:3 OUTPUT:
LANGUAGE SETUP
OSD:
MENU:
ENGLISH
ENGLISH
ORIGINAL
AUDIO:
SUBTITLE:
AUDIO FOLLOW
Selected setting
continued
GB
59
Download from Www.Somanuals.com. All Manuals Search And Download.
To reset all of the [SETUP]
settings
Setting the Display or
Sound Track Language
[LANGUAGE SETUP]
1 Select [RESET] in Step 4 and press
2 Select [YES] using X/x.
.
You can also quit the process and return to the
Control Menu display by selecting [NO] here.
[LANGUAGE SETUP] allows you to set
various languages for the on-screen display or
sound track.
3 Press
.
return to the default settings. Do not press [/
1 while resetting the system as it takes a few
seconds to complete.
Select [LANGUAGE SETUP] in the Setup
Display. For details, see “Using the Setup
Note
• When you turn the system on after resetting and no
disc is in the unit, the guide message appears on the
LANGUAGE SETUP
OSD:
ENGLISH
ENGLISH
MENU:
AUDIO:
SUBTITLE:
ORIGINAL
AUDIO FOLLOW
press
, to return to normal screen, press CLEAR.
x [OSD] (On-Screen Display)
Switches the display language on the TV screen.
x [MENU] (DVD VIDEO only)
You can select the desired language for the
disc’s menu.
x [AUDIO] (DVD VIDEO only)
Switches the language of the sound track.
When you select [ORIGINAL], the language
given priority in the disc is selected.
x [SUBTITLE] (DVD VIDEO only)
Switches the language of the subtitle recorded
on the DVD VIDEO.
When you select [AUDIO FOLLOW], the
language for the subtitles changes according to
the language you selected for the sound track.
Tip
• If you select [OTHERS t] in [MENU], [AUDIO],
and [SUBTITLE], select and enter a language code
number buttons.
Note
• When you select a language in [MENU], [AUDIO],
or [SUBTITLE] that is not recorded on the DVD
VIDEO, one of the recorded languages will be
automatically selected (depending on the disc, the
language may not be selected automatically).
GB
60
Download from Www.Somanuals.com. All Manuals Search And Download.
[16:9]
Settings for the Display
[SCREEN SETUP]
Choose settings according to the TV to be
connected.
[4:3 LETTER BOX]
[4:3 PAN SCAN]
Select [SCREEN SETUP] in the Setup Display.
For details, see “Using the Setup Display”
The default settings are underlined.
SCREEN SETUP
TV TYPE:
16:9
ON
SCREEN SAVER:
BACKGROUND:
JACKET PICTURE
Note
• Depending on the DVD, [4:3 LETTER BOX] may be
selected automatically instead of [4:3 PAN SCAN] or
vice versa.
x [SCREEN SAVER]
The screen saver image appears when you leave
the system in pause or stop mode for 15 minutes,
or when you play back a CD, DATA CD (MP3
audio), or DATA DVD (MP3 audio) for more
than 15 minutes. The screen saver will help
prevent your display device from becoming
x [TV TYPE]
Selects the aspect ratio of the connected TV (4:3
standard or wide).
The default setting varies, depending on the
country model.
damaged (ghosting). Press any button (e.g.,
button) to cancel the screen saver.
H
[16:9]
Select this when you connect a
wide-screen TV or a TV with a
wide mode function.
[ON]
Turns on the screen saver.
Turns off the screen saver.
[4:3 LETTER
BOX]
Select this when you connect a 4:3
screen TV. Displays a wide picture
with bands on the upper and lower
portions of the TV screen.
[OFF]
x [BACKGROUND]
Selects the background color or picture on the
TV screen in stop mode or while playing a CD,
DATA CD (MP3 audio), or DATA DVD (MP3
audio).
[4:3 PAN SCAN]
Select this when you connect a 4:3
screen TV. Automatically displays
the wide picture on the entire
screen and cuts off the portions
that do not fit.
[JACKET
PICTURE]
The jacket picture (still picture)
appears, but only when the jacket
picture is already recorded on the
disc (CD-EXTRA, etc.). If the
disc does not contain a jacket
picture, the [GRAPHICS] picture
appears.
[GRAPHICS]
A preset picture stored in the
system appears.
[BLUE]
The background color is blue.
The background color is black.
[BLACK]
continued
GB
61
Download from Www.Somanuals.com. All Manuals Search And Download.
x [MULTI-DISC RESUME] (DVD VIDEO/
VIDEO CD only)
Switches the Multi-disc Resume setting on or
off.
Custom Settings
[CUSTOM SETUP]
Use this to set up playback related and other
settings.
[ON]
Stores the resume settings in
memory for up to 40 discs.
[OFF]
Does not store the resume settings
in memory. Playback restarts at
the resume point only for the
current disc in the unit.
Select [CUSTOM SETUP] in the Setup Display.
For details, see “Using the Setup Display”
The default settings are underlined.
x [AUDIO DRC] (DVD VIDEO only)
Narrows the dynamic range of the sound track.
Useful for watching movies at low volume late
at night.
CUSTOM SETUP
AUTO
OFF
ON
PAUSE MODE:
TRACK SELECTION:
MULTI-DISC RESUME:
AUDIO DRC:
OFF
Registration Code
DivX:
[OFF]
No compression of dynamic
range.
[STANDARD]
Reproduces the sound track with
the kind of dynamic range that the
recording engineer intended.
x [PAUSE MODE] (DVD VIDEO/DVD-R/
DVD-RW only)
Selects the picture in pause mode.
[MAX]
Compresses dynamic range fully.
[AUTO]
The picture, including subjects
that move dynamically, is output
with no jitter. Normally select this
position.
x [DivX]
(Except for United Kingdom and North
American models)
Displays the registration code for this system.
For more information, go to
[FRAME]
The picture, including subjects
that do not move dynamically, is
output in high resolution.
x [TRACK SELECTION] (DVD VIDEO only)
Gives the sound track which contains the highest
number of channels priority when you play a
DVD VIDEO on which multiple audio formats
(PCM, DTS, MPEG audio, or Dolby Digital
format) are recorded.
[OFF]
No priority given.
Priority given.
[AUTO]
Note
• When you set the item to [AUTO], the language may
change. The [TRACK SELECTION] setting has
higher priority than the [AUDIO] settings in
the disc, this function may not work.)
• If PCM, DTS, Dolby Digital sound, and MPEG audio
tracks have the same number of channels, the system
selects PCM, DTS, Dolby Digital sound, and MPEG
audio tracks in this order.
GB
62
Download from Www.Somanuals.com. All Manuals Search And Download.
x [DISTANCE]
The default distance setting for the speakers in
relation to the listening position is shown below.
When you set the distance using the Quick Setup
(page 13), the settings is automatically
displayed.
Settings for the Speakers
[SPEAKER SETUP]
To obtain the best possible surround sound, set
connection of the speakers and their distance
from your listening position. Then use the test
tone to adjust the level and the balance of the
speakers to the same level.
Select [SPEAKER SETUP] in the Setup
Display. For details, see “Using the Setup
1.0 - 7.0 m3)
3 - 23 ft
/
0.0 - 7.0 m2)
0 - 23 ft
/
The default settings are underlined.
SPEAKER SETUP
CONNECTION:
DISTANCE:
LEVEL(FRONT):
LEVEL(SURROUND):
TEST TONE:
OFF
YES
YES
YES
YES
FRONT:
CENTER:
SURROUND:
SUBWOOFER:
Be sure to change the value in the Setup Display
when you move the speakers.
To return to the default setting
when changing a setting
[FRONT]
Front speaker distance from the
listening position can be set from
1.0 to 7.0 meters3) (3 to 23 ft).
3.0 m/10 ft1)
Select the item, then press CLEAR. Note that
only the [CONNECTION] setting does not
return to the default setting.
[CENTER]
Center speaker distance can be
moved up to 1.6 meters (5 ft)
closer to the listening position
from the front speaker distance.
3.0 m/10 ft1)
(appears when you
set [CENTER] to
[YES] in the
[CONNECTION]
setting.)
x [CONNECTION]
If you do not connect center or surround
speakers, set the parameters for [CENTER] and
[SURROUND]. Since the front speaker and
subwoofer setting is fixed, you cannot change
them.
[SURROUND]
3.0 m/10 ft1)
(appears when you
set [SURROUND]
to [YES] in the
[CONNECTION]
setting.)
Surround speaker distance from
the listening position can be set
from 0.0 to 7.0 meters2) (0 to 23
ft).
[FRONT]
[YES]
[CENTER]
[YES]: Normally select this.
[NONE]: Select this if no center
speaker is used.
[SURROUND]
[YES]: Normally select this.
[NONE]: Select this if no
surround speaker is used.
default settings are changed.
2)0.0 to 6.9 meters for North American models.
3)0.9 to 6.9 meters for North American models.
[SUBWOOFER]
[YES]
Note
Note
• When you change the [CONNECTION] setting, the
[SPEAKER FORMATION] setting returns to
[STANDARD].
• If all front and surround speakers are not placed at an
equal distance from your listening position, set the
distance according to the closest speaker.
continued
GB
63
Download from Www.Somanuals.com. All Manuals Search And Download.
• Do not place the surround speakers farther away from
your listening position than the front speakers.
• Depending on the input stream, the [DISTANCE]
setting may not be effective.
Adjusting the speaker level by
using the test tone
1
2
3
4
Press
in stop mode.
DISPLAY when the system is
x [LEVEL (FRONT)]
You can vary the level of front speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
The Control Menu display appears.
Press X/x to select
then press
[SETUP],
.
The options for [SETUP] appear.
[L/R]
0.0 dB
Set this between –6.0 dB and
0.0 dB.
Press X/x to select [CUSTOM], then
press
[CENTER]
0.0 dB
(appears when you
Set this between –6.0 dB and
+6.0 dB.
.
The Setup Display appears.
set [CENTER] to
[YES] in the
[CONNECTION]
setting.)
Press X/x repeatedly to select
[SPEAKER SETUP], then press
c.
or
5
6
Press X/x repeatedly to select [TEST
TONE], then press or c.
[SUBWOOFER]
0.0 dB
Set this between –6.0 dB and
+6.0 dB.
Press X/x repeatedly to select [ON],
then press
x [LEVEL (SURROUND)]
.
You can vary the level of surround speakers as
follows. Be sure to set [TEST TONE] to [ON]
for easy adjustment.
You will hear the test tone from each
speaker in sequence.
7
From your listening position, adjust the
value of [LEVEL (FRONT)] or [LEVEL
(SURROUND)] using C/X/x/c.
[L/R]
0.0 dB
(appears when you
Set this between –6.0 dB and
+6.0 dB.
The test tone is emitted from only the
speaker which you are adjusting.
set [SURROUND]
to [YES] in the
[CONNECTION]
setting.)
8
Press
when you have finished
making adjustments.
9
Press X/x repeatedly to select [TEST
To adjust the volume of all the
speakers at one time
TONE], then press
Press X/x repeatedly to select [OFF],
then press
.
10
Turn the VOLUME control on the unit, or press
VOLUME +/– on the remote.
.
x [TEST TONE]
The speakers will emit a test tone to adjust
[LEVEL (FRONT)] and [LEVEL
(SURROUND)].
[OFF]
[ON]
The test tone is not emitted from the
speakers.
The test tone is emitted from each speaker
in sequence while adjusting level. When
you select one of the [SPEAKER SETUP]
items, the test tone is emitted from each
speaker in sequence.
GB
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Returning to the Default
Settings
You can return the system parameters, such as
preset stations, to the default settings.
"/1
A
x
1
2
Press "/1 to turn on the system.
Press x, A, and "/1 on the unit at the
same time.
“COLD RESET” appears in the front panel
display and the default settings are returned.
GB
65
Download from Www.Somanuals.com. All Manuals Search And Download.
On adjusting volume
• Do not turn up the volume while listening to a section
with very low level inputs or no audio signals. If you
do, the speakers may be damaged when a peak level
section is suddenly played.
Additional Information
Precautions
On cleaning
On power sources
• Clean the cabinet, panel, and controls with a soft cloth
slightly moistened with a mild detergent solution. Do
not use any type of abrasive pad, scouring powder or
solvent such as alcohol or benzine.
If you have any questions or problems concerning
your system, please consult your nearest Sony dealer.
• Unplug the unit from the wall outlet if you do not
intend to use it for an extended period of time. To
disconnect the cord, pull it out by the plug, never by
the cord.
On placement
• Place the system in a location with adequate
ventilation to prevent heat build-up in the system.
• At high volume, over long periods of time, the cabinet
becomes hot to the touch. This is not a malfunction.
However, touching the cabinet should be avoided. Do
not place the unit in a confined space where
ventilation is poor as this may cause overheating.
• Do not block the ventilation slots by putting anything
on the system. The system is equipped with a high
power amplifier. If the ventilation slots are blocked,
the unit can overheat and malfunction.
On cleaning discs, disc/lens
cleaners
• Do not use cleaning discs or disc/lens cleaners
(including wet or spray types). These may cause
the apparatus to malfunction.
On your TV’s color
• If the speakers should cause the TV screen to have
color irregularity, turn off the TV then turn it on after
15 to 30 minutes. If color irregularity should persist,
place the speakers further away from the TV set.
• Do not place the unit on surfaces (rugs, blankets, etc.)
or near materials (curtains, draperies) that may block
the ventilation slots.
IMPORTANT NOTICE
Caution: This system is capable of holding a still
• Do not install the unit near heat sources such as
radiators, or air ducts, or in a place subject to direct
sunlight, excessive dust, mechanical vibration, or
shock.
video image or on-screen display image on your
television screen indefinitely. If you leave the still
video image or on-screen display image displayed
on your TV for an extended period of time you risk
permanent damage to your television screen.
Projection televisions are especially susceptible to
this.
• Do not install the unit in an inclined position. It is
designed to be operated in a horizontal position only.
• Keep the unit and discs away from equipment with
strong magnets, such as microwave ovens, or large
loudspeakers.
On moving the system
• Do not place heavy objects on the unit.
Before moving the system, make sure that there is no
disc inserted, and remove the AC power cord (mains
lead) from the wall outlet (mains).
On operation
• If the system is brought directly from a cold to a warm
location, or is placed in a very damp room, moisture
may condense on the lenses inside the control unit.
Should this occur, the system may not operate
properly. In this case, remove the disc and leave the
system turned on for about half an hour until the
moisture evaporates.
• When you move the system, take out any disc. If you
don’t, the disc may be damaged.
• If anything falls into the cabinet, unplug the unit and
have it checked by qualified personnel before
operating it any further.
GB
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes about the Discs
Troubleshooting
If you experience any of the following
difficulties while using the system, use this
troubleshooting guide to help remedy the
problem before requesting repairs. Should any
problem persist, consult your nearest Sony
dealer.
On handling discs
• To keep the disc clean, handle the disc by its
edge. Do not touch the surface.
• Do not stick paper or tape on the disc.
Note that if service personnel changes some
parts during repair, these parts may be retained.
Power
The power is not turned on.
• Check that the AC power cord (mains lead) is
connected securely.
• Do not expose the disc to direct sunlight or
heat sources such as hot air ducts, or leave it in
a car parked in direct sunlight as the
temperature may rise considerably inside the
car.
• Press "/1 after “STANDBY” disappears from the
front panel display.
If “PROTECTOR” and “PUSH POWER” appear
alternately in the front panel display.
Press "/1 to turn off the system, and check the
following items after “STANDBY” disappears.
• Are the + and – speaker cords short-circuited?
• Are you using only the specified speakers?
• Is anything blocking the ventilation holes of the
system?
• After playing, store the disc in its case.
On cleaning
• Before playing, clean the disc with a cleaning
cloth.
Wipe the disc from the center out.
After checking the above items and fixing any
problems, turn on the system. If the cause of the
problem cannot be found even after checking all the
above items, consult your nearest Sony dealer.
Picture
• Do not use solvents such as benzine, thinner,
commercially available cleaners, or anti-static
spray intended for vinyl LPs.
There is no picture.
• The SCART (EURO AV) cord is not connected
securely.
This system can only play back a standard
circular disc. Using neither standard nor circular
discs (e.g., card, heart, or star shape) may cause
a malfunction.
• The SCART (EURO AV) cord is damaged.
• The unit is not connected to the correct
• The video input on the TV is not set so that you
can view pictures from the system.
• Check the output method on your system
Do not use a disc that has a commercially
available accessory attached, such as a label or
ring.
Picture noise appears.
• The disc is dirty or flawed.
Even though you set the aspect ratio in [TV
TYPE] of [SCREEN SETUP], the picture does
not fill the TV screen.
• The aspect ratio on the disc is fixed.
continued
GB
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Color irregularity occurs on the TV screen.
The subwoofer and the front speakers in this system
are magnetically shielded to prevent magnetic
leakage. However, some leakage may occur, as a
high-strength magnet is employed. If this happens,
check the following items:
The surround effect is difficult to hear when
you are playing a Dolby Digital, DTS, or MPEG
audio sound track.
• Check the speaker connections and settings (page
• If the speakers are used with a CRT-based TV or
projector, install the speakers at least 0.3 meters
(1.0 ft) from the TV set.
• Depending on the DVD, the output signal may not
be the entire 5.1 channel. It may be monaural or
stereo even if the sound track is recorded in Dolby
Digital or MPEG audio format.
• If the color irregularity persists, turn off the TV set
once, then turn it on after 15 to 30 minutes.
• If howling occurs, reposition the speakers farther
away from the TV set.
The sound comes from the center speaker
only.
• Depending on the disc, the sound may come from
the center speaker only.
• Make sure that no magnetic object (magnetic latch
on a TV stand, health care device, toy, etc.) is
placed near the speakers.
No sound is heard from the center speaker.
• Check the speaker connections and settings (page
Sound
• Depending on the source, the effect of the center
speaker may be less noticeable.
There is no sound.
• The speaker cord is not connected securely.
• Press MUTING on the remote if “MUTING ON”
is displayed in the front panel display.
• The system is in pause mode or in Slow-motion
Play mode. Press H to return to normal play
mode.
• A 2 channel source is being played.
No sound or only a very low-level sound is
heard from the surround speakers.
• Check the speaker connections and settings (page
• Fast forward or fast reverse is performed. Press
H to return to normal play mode.
• Depending on the source, the effect of the
surround speakers may be less noticeable.
• A 2 channel source is being played.
The left and right sounds are unbalanced or
reversed.
• Check that the speakers and components are
connected correctly and securely.
There is no sound from the speakers that are
indicated in the front panel display.
• The front panel display indicates the selected
[SPEAKER FORMATION]. It does not indicate
There is no sound from the subwoofer.
• Check the speaker connections and settings (page
Operation
Severe hum or noise is heard.
• Check that the speakers and components are
connected securely.
Radio stations cannot be tuned in.
• Check that the antenna (aerial) is connected
securely. Adjust the antenna (aerial) or connect an
external antenna (aerial) if necessary.
• The signal strength of the stations is too weak
(when tuning in with automatic tuning). Use direct
tuning.
• Check that the connecting cords are away from a
transformer or motor, and at least 3 meters (10 ft)
away from your TV set or a fluorescent light.
• Move your TV away from the audio components.
• The plugs and jacks are dirty. Wipe them with a
cloth slightly moistened with alcohol.
• Clean the disc.
• No stations have been preset or the preset stations
have been cleared (when tuning by scanning
• Press DISPLAY so that the frequency appears in
the front panel display.
The sound loses stereo effect when you play a
VIDEO CD, a CD, or an MP3.
• Set [AUDIO] to [STEREO] by pressing AUDIO
The remote does not function.
• There are obstacles between the remote and the
unit.
• Make sure the unit is connected properly.
GB
68
Download from Www.Somanuals.com. All Manuals Search And Download.
• The distance between the remote and the unit is
too far.
• The [MODE (MP3, JPEG)] setting has been set to
[AUDIO (MP3)] (page 42).
• The remote is not pointed at the remote sensor on
the unit.
• If you cannot change the [MODE (MP3, JPEG)]
setting, re-load the disc or turn the system off, then
on.
• The batteries in the remote are weak.
• The DATA CD/DATA DVD contains a DivX
video file (except for United Kingdom and North
American models).
The disc does not play.
• There is no disc inserted.
• The disc is upside down.
The MP3 audio tracks and JPEG image file
starts playing simultaneously.
• [AUTO] has been selected in [MODE (MP3,
Insert the disc with the playback side facing down.
• The disc is skewed on the disc tray.
• The region code on the DVD does not match the
system.
The DivX video file cannot be played (except
for United Kingdom and North American
models).
• The file is not created in DivX format.
• The file has an extension other than “.AVI” or
“.DIVX.”
• Moisture has condensed inside the unit and may
cause damage to the lenses. Remove the disc and
leave the unit turned on for about half an hour.
The MP3 audio track cannot be played.
• The DATA CD is not recorded in the MP3 format
that conforms to ISO 9660 Level 1/Level 2, or
Joliet.
• The DATA CD/DATA DVD is not created in a
DivX format that conforms to ISO 9660 Level 1/
Level 2 or, Joliet/UDF.
• The DATA DVD is not recorded in an MP3
format that conforms to UDF (Universal Disk
Format).
• The DivX video file is larger than 720 (width) ×
576 (height).
• The MP3 audio track does not have the extension
“.MP3.”
The titles of album/track/file name are not
displayed correctly.
• The data is not formatted in MP3 even though it
has the extension “.MP3.”
• The system can only display numbers and letters
of the alphabets. Other characters are displayed as
[*].
• The data is not MPEG1 Audio Layer 3 data.
• The system cannot play audio tracks in MP3PRO
format.
A disc does not start playing from the
beginning.
• The [MODE (MP3, JPEG)] setting has been set to
• Program Play, Shuffle Play, or Repeat Play has
been selected.
• If you cannot change the [MODE (MP3, JPEG)]
setting, re-load the disc or turn the system off, then
on.
Press CLEAR to cancel these functions before
playing a disc.
• Resume Play has been selected.
During stop, press x on the unit or the remote and
• The DATA CD/DATA DVD contains a DivX
video file (except for United Kingdom and North
American models).
• The title, DVD or PBC menu automatically
appears on the TV screen.
The JPEG image file cannot be played.
• The DATA CD is not recorded in a JPEG format
that conforms to ISO 9660 Level 1/Level 2, or
Joliet.
The system starts playing the disc
automatically.
• The DVD features an auto playback function.
• The DATA DVD is not recorded in a JPEG format
that conforms to UDF (Universal Disk Format).
• It has an extension other than “.JPEG” or “.JPG.”
• It is larger than 3,072 (width) × 2,048 (height) in
normal mode, or more than 2,000,000 pixels in
Progressive JPEG which is mainly used on the
Internet WEB site.
Playback stops automatically.
• Some discs may contain an auto pause signal.
While playing such a disc, the system stops
playback at the auto pause signal.
• It does not fit the TV screen (those images are
reduced).
continued
GB
69
Download from Www.Somanuals.com. All Manuals Search And Download.
You cannot perform some functions such as
Stop, Search, Slow-motion Play, or Repeat
Play.
The unit does not work and “CHILD LOCK”
appears in the front panel display when you
press any button on the unit.
• Depending on the disc, you may not be able to
perform some of the operations above. See the
operating instructions that came with the disc.
Messages do not appear on the TV screen in
the language you want.
• In the Setup Display, select the desired language
for the on-screen display in [OSD] under
[LANGUAGE SETUP] (page 60).
The language for the sound track cannot be
changed.
• Multilingual tracks are not recorded on the DVD
being played.
• The DVD prohibits changing the language for the
sound track.
The subtitle language cannot be changed.
• Multilingual subtitles are not recorded on the
DVD being played.
• The DVD prohibits changing the subtitles.
The subtitle cannot be turned off.
• The DVD prohibits turning off subtitles.
The angles cannot be changed.
• Multi-angles are not recorded on the DVD being
• The DVD prohibits changing the angles.
A disc cannot be ejected and “LOCKED”
appears in the front panel display.
• Contact your Sony dealer or local authorized Sony
service facility.
[Data error] appears on the TV screen when
playing a DATA CD or DATA DVD.
• The MP3 audio track/JPEG image file/DivX
video file* you want to play is broken.
• The data is not MPEG1 Audio Layer 3 data.
• The JPEG image file format does not conform to
DCF.
• The JPEG image file has the extension “.JPG” or
“.JPEG,” but is not in JPEG format.
• The file you want to play has the extension “.AVI”
or “.DIVX” but is not in DivX format, or is in
DivX format but does not conform to a DivX
Certified profiles.*
* Except for United Kingdom and North American
models.
The system does not work normally.
• Disconnect the AC power cord (mains lead) from
the wall outlet (mains), then reconnect after
several minutes.
GB
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Self-diagnosis Function
Specifications
(When letters/numbers appear in the
display)
Amplifier section
Stereo mode (rated)
50 W + 50 W (at 3 ohms,
1 kHz, 1 % THD)
Surround mode (reference) RMS output power
FL/FR/C/SL/SR*: 67 watts
When the self-diagnosis function is activated to
prevent the system from malfunctioning, a 5-
character service number (e.g., C 13 50) with a
combination of a letter and 4 digits appears on
the TV screen or front panel display. In this case,
check the following table.
(per channel at 3 ohms,
1 kHz, 10 % THD)
Subwoofer*: 65 watts (at 3
ohms, 80 Hz, 10 % THD)
*
Depending on the sound field settings and the source,
there may be no sound output.
C:13:50
Inputs (Analog)
TV (AUDIO IN)
Sensitivity: 450/250 mV
DVD system
Laser
Semiconductor laser
(DVD: λ = 650 nm)
(CD: λ = 790 nm)
Emission duration:
continuous
First 3
Cause and/or corrective action
characters of
the service
number
C 13
The disc is dirty.
Signal format system
PAL/NTSC
,Clean the disc with a soft cloth
Tuner section
C 31
The disc is not inserted correctly.
,Restart the system, then re-insert
the disc correctly.
System
PLL quartz-locked digital
synthesizer
FM tuner section
Tuning range
North American models: 87.5-108.0 MHz (100 kHz
step)
E XX
To prevent a malfunction, the
system has performed the self-
diagnosis function.
(xx is a number)
Other models:
87.5-108.0 MHz (50 kHz
step)
FM wire antenna (aerial)
,Contact your nearest Sony
dealer or local authorized Sony
service facility and give the 5-
character service number.
Example: E 61 10
Antenna (aerial)
Antenna (aerial) terminals 75 ohms, unbalanced
Intermediate frequency
AM tuner section
Tuning range
North American, Mexican, and Latin American
models:
10.7 MHz
When displaying the version
number on the TV screen
530 – 1,710 kHz (with the
interval set at 10 kHz)
531 – 1,710 kHz (with the
interval set at 9 kHz)
When you turn on the system, the version
number [VER.X.XX] (X is a number) may
appear on the TV screen. Although this is not a
malfunction and for Sony service use only,
normal system operation will not be possible.
Turn off the system, and then turn on the system
again to operate.
European, Russian, and Middle Eastern models:
531 – 1,602 kHz (with the
interval set at 9 kHz)
Australian and New Zealand models:
531 – 1,710 kHz (with the
interval set at 9 kHz)
VER.X.XX
530 – 1,710 kHz (with the
interval set at 10 kHz)
continued
GB
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Other models:
531 – 1,602 kHz (with the
interval set at 9 kHz)
530 – 1,610 kHz (with the
interval set at 10 kHz)
AM loop antenna (aerial)
450 kHz
Unpacking
• Front speakers (2)
• Center speaker (1)
• Surround speakers (2)
Antenna (aerial)
Intermediate frequency
• Subwoofer (1)
• AM loop antenna (aerial) (1)
• FM wire antenna (aerial) (1)
• Speaker cords (6, red/white/green/gray/blue/purple)
• Remote Commander (remote) (1)
• R6 (size AA) batteries (2)
• Operating Instructions
Video section
Outputs
VIDEO: 1 Vp-p 75 ohms
R/G/B: 0.7 Vp-p 75 ohms
Speakers
Front/Surround (SS-TS60)
Speaker system
Bass reflex, magnetically
shielded
50 mm dia. cone type
3.0 ohms
68 × 126 × 55 mm (w/h/d)
0.4 kg
•Standby power consumption 0.3 W (or
less).
Speaker unit
Rated impedance
Dimensions (approx.)
Mass (approx.)
•Halogenated flame retardants are not
used in the printed wiring boards.
•Over 85 % power efficiency of
amplifier block is achieved with the
full digital amplifier, S-master.
Center (SS-CT54)
Speaker system
Bass reflex, magnetically
shielded
Speaker unit
50 mm dia. cone type
3.0 ohms
125 × 69 × 51 mm (w/h/d)
0.3 kg
Rated impedance
Dimensions (approx.)
Mass (approx.)
Subwoofer (SS-WS75)
Speaker system
Bass reflex, magnetically
shielded
Speaker unit
Rated impedance
Dimensions (approx.)
150 mm dia. cone type
3.0 ohms
169 × 300 × 335 mm
(w/h/d)
Mass (approx.)
3.8 kg
General
Power requirements
Power consumption
220 – 240 V AC, 50/60 Hz
On: 80 W
Standby: 0.3 W (at the
Power Saving mode)
430 × 67 × 310 mm (w/h/d)
incl. projecting parts
3.2 kg
Dimensions (approx.)
Mass (approx.)
Design and specifications are subject to change
without notice.
GB
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Dolby Surround Pro Logic
As one method of decoding Dolby Surround,
Dolby Surround Pro Logic produces four
channels from 2 channel sound. Compared with
the former Dolby Surround system, Dolby
Surround Pro Logic reproduces left-to-right
panning more naturally and localizes sounds
more precisely. To take full advantage of Dolby
Surround Pro Logic, you should have one pair of
surround speakers and a center speaker. The
surround speakers output monaural sound.
Glossary
Album
Section of a music piece or an image on a data
CD containing MP3 audio tracks or JPEG files.
Chapter
Subdivision of a title on a DVD. A title is
composed of several chapters.
®
DivX (except for United Kingdom
and North American models)
Digital video technology created by DivX, Inc.
Videos encoded with DivX technology are
among the highest quality with a relatively small
file size.
DTS
Digital audio compression technology
developed by DTS, Inc. This technology
conforms to 5.1-channel surround. This format
comprises of stereo rear channel and there is
discrete subwoofer channel in this format. DTS
provides the same 5.1 discrete channels of high
quality digital audio. The good channel
separation is realized due to the all channel data
being recorded discretely and processed in
digitally.
Dolby Digital
This movie theater sound format is more
advanced than Dolby Surround Pro Logic. In
this format, the surround speakers output stereo
sound with an expanded frequency range, and a
subwoofer channel for deep bass is
independently provided. This format is also
called “5.1” with the subwoofer channel
designed as the 0.1 channel (since it functions
only when a deep bass effect is needed). All six
channels in this format are recorded separately
for superior channel separation. Furthermore,
since all the signals are processed digitally, less
signal degradation occurs.
DVD
A disc that contains up to 8 hours of moving
pictures even though its diameter is the same as
a CD.
The data capacity of a single-layer and single-
sided DVD, at 4.7 GB (Giga Byte), is 7 times
that of a CD. Furthermore, the data capacity of a
dual-layer and single-sided DVD is 8.5 GB, a
single-layer and double-sided DVD 9.4 GB, and
a dual-layer and double-sided DVD 17 GB.
The picture data uses the MPEG 2 format, one of
a worldwide standard of digital compression
technology. The picture data is compressed to
about 1/40 of its original size. The DVD also
uses the variable rate coding technology that
processes allocated data according to the status
of the picture.
The audio data is recorded in Dolby Digital as
well as in PCM, allowing you to enjoy more
realistic audio presence.
Furthermore, various advanced functions such
as the multi-angle, multilingual, and Parental
Control functions are provided with the DVD.
Dolby Pro Logic II
Dolby Pro Logic II creates five full-bandwidth
output channels from 2 channel sources. This is
done using an advanced, high-purity matrix
surround decoder that extracts the spatial
properties of the original recording without
adding any new sounds or tonal colorations.
x Movie mode
The Movie mode is for use with stereo television
shows and all programs encoded in Dolby
Surround. The result is enhanced sound field
directionality that approaches the quality of
discrete 5.1-channel sound.
x Music mode
The Music mode is for use with any stereo music
recordings, and provides a wide and deep sound
space.
continued
GB
73
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD+RW
scenes are skipped or replaced with other scenes
and so on.
A DVD+RW (plus RW) is a recordable and
rewritable disc. DVD+RWs use a recording
format that is comparable to the DVD VIDEO
format.
PCM (Pulse Code Modulation)
A method for converting analog audio to digital
audio. It is used for the Compact Disc (CD)
audio format.
DVD-RW
A DVD-RW is a recordable and rewritable disc
that is the same size as a DVD VIDEO. The
DVD-RW has two different modes: VR mode
and Video mode. DVD-RWs created in Video
mode have the same format as a DVD VIDEO,
while discs created in VR (Video Recording)
mode allow the contents to be programmed or
edited.
Playback Control (PBC)
Signals encoded on VIDEO CDs (Version 2.0)
to control playback.
By using menu screens recorded on VIDEO
CDs with PBC functions, you can enjoy playing
simple interactive programs, programs with
search functions, and so on.
Region Code
File
This system is used to protect copyrights. A
region number is allocated on each DVD system
or DVD disc according to the sales region. Each
region code is shown on the system as well as on
the disc packaging. The system can play discs
that match its region code. The system can also
play discs with the “ ” mark. Even when the
region code is not shown on the DVD, the region
limit may still apply.
A JPEG image or a DivX video* recorded on a
DATA CD/DATA DVD. (“File” is an exclusive
definition for this system.) A single file consists
of a single image or movie.
* Except for United Kingdom and North American
models.
ALL
Film based software, Video based
software
DVDs can be classified as Film based or Video
based software. Film based DVDs contain the
same images (24 frames per second) that are
shown at movie theaters. Video based DVDs,
such as television dramas or sit-coms, displays
images at 30 frames (or 60 fields) per second.
Scene
On a VIDEO CD with PBC (playback control)
functions, the menu screens, moving pictures
and still pictures are divided into sections called
“scenes.”
Title
MPEG audio
The longest section of a picture or music feature
on a DVD, movie, etc., in video software, or the
entire album in audio software.
A coding system to compress digital audio
signals. MPEG-1 is used for MP3 (MPEG-1
Audio Layer-3). MPEG-2 is used for one of the
audio format of DVD.
Track
Section of a picture or a music piece on a
VIDEO CD, CD, or MP3. An album is
composed of several tracks (MP3 only).
Multi-angle function
Various angles of a scene, or viewpoints of the
video camera are recorded on some DVDs.
Multilingual function
Several languages for the sound or subtitles in a
picture are recorded on some DVDs.
Parental Control
A function of the DVD to limit playback of the
disc by the age of the users according to the
limitation level in each country. The limitation
varies from disc to disc; when it is activated,
playback is completely prohibited, violent
GB
74
Download from Www.Somanuals.com. All Manuals Search And Download.
VIDEO CD
A compact disc that contains moving pictures.
The picture data uses the MPEG 1 format, one of
a worldwide standard of digital compression
technology. The picture data is compressed to
about 1/140 of its original size. Consequently, a
12 cm VIDEO CD can contain up to 74 minutes
of moving pictures.
VIDEO CDs also contain compact audio data.
Sounds outside the range of human hearing are
compressed while sounds we can hear are not
compressed. VIDEO CDs can hold six times the
audio information of conventional audio CDs.
There are two versions of VIDEO CDs.
• Version 1.1: You can play only moving
pictures and sounds.
• Version 2.0: You can play high-resolution still
pictures and enjoy PBC functions.
This system conforms to both versions.
GB
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code List
The language spellings conform to the ISO 639: 1988 (E/F) standard.
Code Language
Code Language
Code Language
Code Language
1027 Afar
1183 Irish
1347 Maori
1507 Samoan
1508 Shona
1509 Somali
1511 Albanian
1512 Serbian
1513 Siswati
1514 Sesotho
1515 Sundanese
1516 Swedish
1517 Swahili
1521 Tamil
1028 Abkhazian
1032 Afrikaans
1039 Amharic
1044 Arabic
1045 Assamese
1051 Aymara
1052 Azerbaijani
1053 Bashkir
1057 Byelorussian
1059 Bulgarian
1060 Bihari
1061 Bislama
1066 Bengali;
Bangla
1067 Tibetan
1070 Breton
1079 Catalan
1093 Corsican
1097 Czech
1103 Welsh
1105 Danish
1109 German
1130 Bhutani
1142 Greek
1144 English
1145 Esperanto
1149 Spanish
1150 Estonian
1151 Basque
1157 Persian
1165 Finnish
1166 Fiji
1186 Scots Gaelic
1194 Galician
1196 Guarani
1203 Gujarati
1209 Hausa
1349 Macedonian
1350 Malayalam
1352 Mongolian
1353 Moldavian
1356 Marathi
1357 Malay
1358 Maltese
1363 Burmese
1365 Nauru
1217 Hindi
1226 Croatian
1229 Hungarian
1233 Armenian
1235 Interlingua
1239 Interlingue
1245 Inupiak
1248 Indonesian
1253 Icelandic
1254 Italian
1257 Hebrew
1261 Japanese
1269 Yiddish
1283 Javanese
1287 Georgian
1297 Kazakh
1298 Greenlandic
1299 Cambodian
1300 Kannada
1301 Korean
1305 Kashmiri
1307 Kurdish
1311 Kirghiz
1369 Nepali
1376 Dutch
1525 Telugu
1527 Tajik
1528 Thai
1379 Norwegian
1393 Occitan
1403 (Afan)Oromo
1408 Oriya
1417 Punjabi
1428 Polish
1435 Pashto;
Pushto
1436 Portuguese
1463 Quechua
1481 Rhaeto-
Romance
1482 Kirundi
1483 Romanian
1489 Russian
1491 Kinyarwanda
1495 Sanskrit
1498 Sindhi
1501 Sangho
1502 Serbo-
Croatian
1529 Tigrinya
1531 Turkmen
1532 Tagalog
1534 Setswana
1535 Tonga
1538 Turkish
1539 Tsonga
1540 Tatar
1543 Twi
1557 Ukrainian
1564 Urdu
1572 Uzbek
1581 Vietnamese
1587 Volapük
1613 Wolof
1632 Xhosa
1665 Yoruba
1684 Chinese
1697 Zulu
1313 Latin
1326 Lingala
1327 Laothian
1332 Lithuanian
1334 Latvian;
Lettish
1171 Faroese
1174 French
1181 Frisian
1503 Singhalese
1505 Slovak
1506 Slovenian
1345 Malagasy
1703 Not specified
Parental Control Area Code List
Code Area
Code Area
Code Area
Code Area
2044 Argentina
2047 Australia
2046 Austria
2057 Belgium
2070 Brazil
2079 Canada
2090 Chile
2165 Finland
2174 France
2109 Germany
2248 India
2238 Indonesia
2254 Italy
2276 Japan
2304 Korea
2363 Malaysia
2362 Mexico
2149 Spain
2376 Netherlands
2390 New Zealand
2379 Norway
2499 Sweden
2086 Switzerland
2528 Thailand
2184 United
Kingdom
2427 Pakistan
2424 Philippines
2436 Portugal
2489 Russia
2092 China
2115 Denmark
2501 Singapore
GB
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Front panel display
About the indications in the front panel display
A Lights up when the time information of
a title or chapter appears in the front
panel display. (DVD only) (34)
I Lights up when the child lock function
is set to on. (53)
J Indicates the selected [SPEAKER
B Lights up when an NTSC disc is
FORMATION]. (57)
loaded.
K Current surround format (Except for
C Lights up when a station is received.
JPEG)
L Lights up when the DYNAMIC BASS is
D Stereo/Monaural effect (Radio only)
selected. (51)
M Displays system’s status such as
chapter, title, or track number, time
information, radio frequency, playing
status, sound field, etc.
E Lights up when the sleep timer is set.
F Lights up when the movie or music
mode is selected. (21)
G Playing status (DVD function only)
GB
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the Control Menu Display
DISPLAY
Use the Control Menu display to select a function and to view related information. Press
repeatedly to turn on or change the Control Menu display as follows:
DISPLAY
, Control Menu display 1
m
Control Menu display 2 (appears for certain discs only)
m
Control Menu display off
Control Menu display
The Control Menu display 1 and 2 will show different items depending on the disc type. For details
about each item, see the pages in parentheses.
Example: Control Menu display 1 when playing a DVD VIDEO.
continued
GB
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Currently playing title number1)
Currently playing chapter number2)
Total number of titles1)
Playback status
(N Playback,
X Pause,
Total number of chapters2)
Control Menu items
x Stop, etc.)
(
)
)
1 2 2 7
Type of disc being
played3)
(
1 8 3 4
DVD VIDEO
T
1 : 3 2 : 5 5
Playing time4)
Current setting
Options
Selected item
OFF
OFF
DISC
TITLE
CHAPTER
Function name of
selected Control
Menu item
REPEAT
ENTER
DISPLAY
Quit:
Operation message
1) Displays the scene number for VIDEO CDs (PBC is on), track number for VIDEO CDs/CDs, album number for
DATA CDs/DATA DVDs. DivX video album number for DATA CDs/DATA DVDs (Except for United Kingdom
and North American models).
2) Displays the index number for VIDEO CDs, MP3 audio track number, or JPEG image file number for DATA CDs/
DATA DVDs. DivX video file number for DATA CDs/DATA DVDs (Except for United Kingdom and North
American models).
3) Displays Super VCD as “SVCD.” Displays “MP3” in the Control Menu display 1 or “JPEG” in the Control Menu
display 2 for DATA CDs/DATA DVDs.
4) Displays the date for JPEG files.
To turn off the display
Press
DISPLAY.
List of Control Menu items
Item
Item Name, Function, Relevant Disc Type
Selects the title, scene, or track to be played.
Selects the chapter or index to be played.
Selects the track to be played.
Selects the type of titles (DVD-RW/DVD-R) to be played, the [ORIGINAL] one, or an edited
[PLAY LIST].
GB
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Checks the elapsed time and the remaining playback time.
Input the time code for picture and music searching.
Displays the DVD/CD text or the MP3 track name.
Sets the speaker formation.
Selects the track to play in the order you want.
[SHUFFLE] (page 29)
Plays the track in random order.
[REPEAT] (page 30)
Plays the entire disc (all titles/all tracks/all albums) repeatedly or one title/chapter/track/album
repeatedly.
[A/V SYNC] (page 37)
Adjusts the delay between the picture and sound.
*
*
Sets to prohibit playback on this system.
[SETUP] (page 59)
Use Quick Setup to choose the desired language of the on-screen display, the aspect ratio of
the TV, speaker formation, and choose yes or no to start the Auto Calibration.
[CUSTOM] Setup
In addition to the Quick Setup setting, you can adjust various other settings.
[RESET]
Returns the settings in [SETUP] to the default setting.
[ALBUM] (page 25)
Selects the album to be played.
[FILE] (page 25)
Selects the JPEG image file or DivX video file* to be played.
[DATE] (page 36)
Displays the date the picture was taken by a digital camera.
**
**
**
**
Specifies the duration for which the slides are displayed on the TV screen.
[EFFECT] (page 43)
Selects the effects to be used for changing slides during a slide show.
[MODE (MP3, JPEG)] (page 42)
Selects the data type; MP3 audio track (AUDIO), JPEG image file (IMAGE) or both (AUTO)
to be played when playing a DATA CD/DATA DVD.
* Except for United Kingdom and North American models.
**These items are not displayed when playing a DATA CD/DATA DVD with DivX video file (except for United
Kingdom and North American models).
Tip
• The Control Menu icon indicator lights up in green
([PROGRAM], [SHUFFLE], [REPEAT], and [A/V SYNC] only). The [ORIGINAL/PLAY LIST] indicator lights
up in green when you select [PLAY LIST] (default setting).
t
when you select any item except [OFF]
GB
81
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Display List
You can set the following items with the DVD Setup Display.
The order of the displayed items may be different from the actual display.
LANGUAGE SETUP
OSD*
CUSTOM SETUP
PAUSE
AUTO
MODE
FRAME
MENU*
TRACK
SELECTION AUTO
OFF
AUDIO*
SUBTITLE*
MULTI-DISC
RESUME
ON
OFF
AUDIO DRC
OFF
STANDARD
MAX
DivX**
SCREEN SETUP
SPEAKER SETUP
16:9
TV TYPE
CONNECTION
FRONT
YES
4:3 LETTER
BOX
CENTER
YES
NONE
SURROUND YES
4:3 PAN SCAN
NONE
SUBWOOFER YES
ON
OFF
JACKET
PICTURE
GRAPHICS
BLUE
SCREEN SAVER
BACKGROUND
DISTANCE
FRONT
CENTER
SURROUND
1.0 m – 7.0 m
0.0 m – 7.0 m
0.0 m – 7.0 m
–6.0 dB – 0.0 dB
–6.0 dB – 0.0 dB
–6.0 dB – +6.0 dB
–6.0 dB – +6.0 dB
L
R
LEVEL
(FRONT)
BLACK
CENTER
SUBWOOFER
LEVEL
(SURROUND)
L
R
–6.0 dB – +6.0 dB
–6.0 dB – +6.0 dB
OFF
ON
TEST TONE
* Select the language you want to use from the displayed language list.
**Except for United Kingdom and North American models.
GB
82
Download from Www.Somanuals.com. All Manuals Search And Download.
System Menu List
You can set the following items with SYSTEM MENU on the remote.
System menu
MEMORY1)
FM MODE2)
MEMORY 1-20 (FM), MEMORY 1-10 (AM)
STEREO
MONO
NAME IN1)
SLEEP
SLEEP OFF, SLEEP 90M-1M
DIMMER
DIMMER OFF
DIMMER ON
DEMO
DEMO ON
DEMO OFF
ATTENUATE3)
CHILD LOCK
ATT ON
ATT OFF
OFF
ON
1)Appears during “TUNER FM” or “TUNER AM” only.
2)Appears during “TUNER FM” only.
3)“ATTENUATE” may not appear, depending on the selected function.
GB
83
Download from Www.Somanuals.com. All Manuals Search And Download.
T
U
V
GB
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
ALPHABETICAL ORDER
BUTTON DESCRIPTIONS
A – O
P – Z
C/X/x/c/
DISC SKIP* eg
REPLAY/
/
57)
54)
* The DISC SKIP button is not
available for this model.
**The H, number 5, and
VOLUME + buttons have
tactile dots. Use the tactile dots
as references when operating
the system.
GB
87
Download from Www.Somanuals.com. All Manuals Search And Download.
(2)
Sony Corporation Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|