4-241-068-13(1)
Compact AV
System
Operating Instructions
DAV-C770
© 2002 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Welcome!
Thank you for purchasing this Sony
Compact AV System. Before
operating this system, please read
this manual thoroughly and retain it
for future reference.
For customers in Canada
CAUTION
Precautions
Safety
TO PREVENT ELECTRIC SHOCK,
DO NOT USE THIS POLARIZED
AC PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER
OUTLET UNLESS THE BLADES
CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.
• If anything falls into the cabinet,
unplug the unit and have it
checked by qualified personnel
before operating it any further.
• The unit is not disconnected from
the mains as long as it is
connected to the mains outlet,
even if the unit itself has been
turned off.
Except for European models
• Unplug the unit from the wall
outlet if you do not intend to use it
for an extended period of time. To
disconnect the cord, pull it out by
the plug, never by the cord.
Installing
• Do not install the appliance in a
confined space, such as a bookcase
or built-in cabinet.
ENERGY STAR® is a U.S.
registered mark.
• Allow adequate air circulation to
prevent internal heat buildup.
• Do not place the unit on surfaces
(rugs, blankets, etc.) or near
materials (curtains, draperies) that
may block the ventilation slots.
• Do not install the unit near heat
sources such as radiators, or air
ducts, or in a place subject to
direct sunlight, excessive dust,
mechanical vibration, or shock.
• Do not install the unit in an
inclined position. It is designed to
be operated in a horizontal
position only.
As an ENERGY STAR® partner,
Sony Corporation has
determined that this product
meets the ENERGY STAR®
guidelines for energy efficiency.
• Keep the unit and discs away from
equipment with strong magnets,
such as microwave ovens, or large
loudspeakers.
• Do not place heavy objects on the
unit.
• If the unit is brought directly from
a cold to a warm location,
moisture may condense inside the
Compact AV System and cause
damage to the lenses. When you
first install the unit, or when you
move it from a cold to a warm
location, wait for about 30 minutes
before operating the unit.
3GB
Download from Www.Somanuals.com. All Manuals Search And Download.
On adjusting volume
Precautions
Do not turn up the volume while listening to a
section with very low level inputs or no audio
signals. If you do, the speakers may be damaged
when a peak level section is played.
On safety
• Caution – The use of optical instruments with
this product will increase eye hazard.
• Should any solid object or liquid fall into the
cabinet, unplug the system and have it checked
by qualified personnel before operating it any
further.
On cleaning
Clean the cabinet, panel, and controls with a soft
cloth slightly moistened with a mild detergent
solution. Do not use any type of abrasive pad,
scouring powder or solvent such as alcohol or
benzine.
On power sources
AC power cord must be changed only at the
If you have any questions or problems concerning
your system, please consult your nearest Sony
dealer.
qualified service shop.
On placement
On cleaning discs
Do not use a commercially available CD/DVD
cleaning disc. It may cause a malfunction.
• Place the system in a location with adequate
ventilation to prevent heat build-up in the
system.
• At high volume, over long periods of time, the
cabinet becomes hot to the touch. This is not a
malfunction. However, touching the cabinet
should be avoided. Do not place the unit in a
confined space where ventilation is poor as this
may cause overheating.
• Do not block the ventilation slots by putting
anything on the system. The system is equipped
with a high power amplifier. If the ventilation
slots on the top surface are blocked, the unit can
overheat and malfunction.
• Do not place the system on a soft surface such
as a rug that might block the ventilation holes
on the bottom.
• Do not place the system in a location near heat
sources, or in a place subject to direct sunlight,
excessive dust, or mechanical shock.
On your TV’s color
If the speakers should cause the TV screen to have
color irregularity, turn off the TV at once then
turn it on after 15 to 30 minutes. If color
irregularity should persist, place the speakers
further away from the set.
The nameplate is located on the bottom exterior.
IMPORTANT NOTICE
Caution: This system is capable of holding a
still video image or on-screen display image on
your television screen indefinitely. If you leave
the still video image or on-screen display image
displayed on your TV for an extended period of
time you risk permanent damage to your
television screen. Projection televisions are
especially susceptible to this.
On operation
• If the system is brought directly from a cold to a
warm location, or is placed in a very damp
room, moisture may condense on the lenses
inside the system. Should this occur, the system
may not operate properly. In this case, remove
the disc and leave the system turned on for
about half an hour until the moisture evaporates.
• When you move the system, take out any discs.
If you don’t, the disc may be damaged.
• For power saving purposes, the system can be
completely turned off by the POWER button on
the main unit. Though the LED remains lit for a
while, the system is completely off.
On carrying the system
When you carry the system, use the following
procedure to protect the inner mechanism.
Remove the disc, and then press and hold the x
button on the system. After “MECHA LOCK” is
displayed on the front panel display, turn off the
system.
4GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
WARNING.......................................................................................................... 2
Welcome! ........................................................................................................... 3
Precautions ........................................................................................................ 4
About this Manual .............................................................................................. 7
This system Can Play the Following Discs ........................................................ 7
Notes about the Discs........................................................................................ 9
Note on DVD 5-disc changer ........................................................................... 10
Index to Parts and Controls ............................................................................. 11
Guide to the Control Menu Display .................................................................. 15
Getting Started ................................................................ 17
Quick Overview................................................................................................ 17
Unpacking ........................................................................................................ 17
Inserting Batteries into the Remote ................................................................. 18
Step 1: Speaker System Hookup ..................................................................... 18
Step 2: Antenna Hookups ................................................................................ 21
Step 3: TV and Video Component Hookups .................................................... 23
Speaker Setup ................................................................................................. 25
Presetting Radio Stations ................................................................................ 30
Playing Discs.................................................................. 32
Playing Discs ................................................................................................... 32
Resuming Playback from the Point Where You Stopped the Disc
(Resume Play) ........................................................................................... 34
Using the DVD’s Menu ..................................................................................... 35
Playing VIDEO CDs with PBC Functions (PBC Playback) .............................. 35
Playing an MP3 Audio Track ............................................................................ 36
Selecting the Play Mode (All Discs, One Disc, or Album) ................................ 38
Creating Your Own Program (Program Play) ................................................... 39
Playing in random order (Shuffle Play) ............................................................ 41
Playing repeatedly (Repeat Play) .................................................................... 42
Searching for a Scene ....................................................... 43
Searching for a Particular Point on a Disc (Scan, Slow-motion Play) .............. 43
Searching for a Title/Chapter/Track/Index/Album ............................................. 44
Viewing Information About the Disc ....................................... 46
Viewing the Playing Time and Remaining Time on the Front Panel Display .... 46
Checking the Playing Time and Remaining Time ............................................ 47
continued5GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Adjustments........................................................... 49
Changing the Sound ........................................................................................ 49
Automatically decoding the input audio signal (Auto Decoding) ...................... 51
Enjoying Surround Sound ................................................................................ 51
Using only the front speakers and Subwoofer (2 Channel Stereo) .................. 54
Adjusting the level parameters......................................................................... 54
Enjoying Movies .............................................................. 55
Changing the Angles ....................................................................................... 55
Displaying the Subtitles ................................................................................... 56
Using Various Additional Functions ....................................... 57
Locking Discs (CUSTOM PARENTAL CONTROL, PARENTAL CONTROL) ... 57
Other Operations ............................................................. 62
Controlling the TV with the Supplied Remote .................................................. 62
Watching the Video or other Unit ..................................................................... 63
Listening to the Radio ...................................................................................... 64
Using the Radio Data System (RDS) (Only for the European models) ........... 65
Naming Preset Stations ................................................................................... 65
Settings and Adjustments ................................................... 67
Using the Setup Display .................................................................................. 67
Setting the Display or Sound Track Language (LANGUAGE SETUP) ............. 68
Settings for the Display (SCREEN SETUP)..................................................... 69
Custom Settings (CUSTOM SETUP)............................................................... 71
Settings for the Speakers (SPEAKER SETUP) ............................................... 72
Additional Information ....................................................... 75
Troubleshooting ............................................................................................... 75
Self-diagnosis Function (When letters/numbers appear in the display) ........... 79
Glossary .......................................................................................................... 79
Specifications................................................................................................... 82
Language Code List......................................................................................... 84
DVD Setup Menu List ...................................................................................... 85
Index ................................................................................................................ 86
Quick reference for Remote Commander ........................................... Back cover
6GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Terms for discs
About this Manual
• Title
The longest sections of a picture or music
feature on a DVD, movie, etc., in video
software, or the entire album in audio
software.
• The instructions in this manual describe
the controls on the remote. You can also
use the controls on the system if they have
the same or similar names as those on the
remote.
• Chapter
• The icons used in this manual are
explained below:
Sections of a picture or a music piece that
are smaller than titles. A title is composed
of several chapters. Depending on the disc,
no chapters may be recorded.
• Album
Section of a music piece on a data CD
containing MP3 audio tracks.
• Track
Icon
Meaning
Icon
Meaning
Functions
available in
Super Audio
CD and
Functions
available in
DVD video
mode
Audio CD
mode
Sections of a picture or a music piece on a
VIDEO CD, Super Audio CD, CD, or
MP3.
• Index (Super Audio CD, CD) / Video
Index (VIDEO CD)
A number that divides a track into sections
to easily locate the point you want on a
VIDEO CD, Super Audio CD, or CD.
Depending on the disc, no indexes may be
recorded.
Functions
available in
VIDEO
Functions
available for
MP3* audio
tracks
CD mode
More
convenient
features
Functions
available in
CD mode
z
• In this manual, the European model is used
for illustration and on-screen display
(OSD) purposes.
• Scene
* MP3 (MPEG1 Audio Layer 3) is a standard format
defined by ISO/MPEG which compress audio data.
On a VIDEO CD with PBC functions
(page 35), the menu screens, moving
pictures and still pictures are divided into
sections called “scenes.”
This system Can Play the
Following Discs
Format of discs
DVD VIDEO
Super Audio CD
VIDEO CD
Music CD
continued7GB
The “DVD VIDEO” logo is a trademark.
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc
Region code
DVD
structure
Title
Your system has a region code printed on
the back of the unit and will only play
DVDs labelled with the same region code.
Chapter
Track
Disc
Disc
VIDEO CD,
Super
Audio CD,
or CD
ALL
DVDs labelled
system.
will also play on this
Index
structure
If you try to play any other DVD, the
message “Playback prohibited by area
limitations.” will appear on the TV screen.
Depending on the DVD, no region code
indication may be labelled even though
playing the DVD is prohibited by area
restrictions.
MP3
structure
Album
Track
Note on PBC (Playback Control)
(VIDEO CDs)
This system conforms to Ver. 1.1 and Ver.
2.0 of VIDEO CD standards. You can enjoy
two kinds of playback depending on the disc
type.
Examples of discs that the system
cannot play
The system cannot play the following discs:
• CD-ROMs (PHOTO CDs included)
• CD-Rs/CD-RWs other than those recorded
in the following formats:
Disc type
You can
VIDEO CDs
without PBC
functions
Enjoy video playback
(moving pictures) as well
as music.
– music CD format
(Ver. 1.1 discs)
– video CD format
VIDEO CDs
with PBC
functions
Play interactive software
using menu screens
displayed on the TV screen
(PBC Playback), in
– MP3 format that conforms to ISO9660*
Level 1/Level 2, or its extended format,
Joliet
(Ver. 2.0 discs)
addition to the video
• Data part of CD-Extras
playback functions of Ver
1.1 discs. Moreover, you
can play high-resolution
still pictures, if they are
included on the disc.
• DVD-ROMs
• DVD Audio discs
* A logical format of files and folders on CD-ROMs,
defined by ISO (International Standard
Organization)
Do not load the following discs:
• A DVD with a different region code (page
8, 81).
• A disc that is neither standard nor circular
(e.g., card, heart, or star shape).
• A disc with paper or stickers on it.
• A disc that has the adhesive, cellophane
tape, or a sticker still left on it.
Note
Some CD-Rs or CD-RWs cannot be played on this
system depending upon the recording quality or
physical condition of the disc, or the characteristics
of the recording device.
Furthermore, the disc will not play if it has not been
correctly finalized. For more information, see the
operating instructions for the recording device.
8GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Note on playback operations of
DVDs and VIDEO CDs
Notes about the Discs
Some playback operations of DVDs and
VIDEO CDs may be intentionally set by
software producers. Since this system plays
DVDs and VIDEO CDs according to the
disc contents the software producers
On handling discs
• To keep the disc clean, handle the disc by
its edge. Do not touch the surface.
• Do not stick paper or tape on the disc.
designed, some playback features may not
be available. Also, refer to the instructions
supplied with the DVDs or VIDEO CDs.
Copyrights
• Do not expose the disc to direct sunlight or
heat sources such as hot air ducts, or leave
it in a car parked in direct sunlight as the
temperature may rise considerably inside
the car.
This product incorporates copyright
protection technology that is protected by
method claims of certain U.S. patents, other
intellectual property rights owned by
Macrovision Corporation, and other rights
owners. Use of this copyright protection
technology must be authorized by
• After playing, store the disc in its case.
On cleaning
Macrovision Corporation, and is intended
for home and other limited viewing uses
only unless otherwise authorized by
Macrovision Corporation. Reverse
• Before playing, clean the disc with a
cleaning cloth.
Wipe the disc from the center out.
engineering or disassembly is prohibited.
This system incorporates with Dolby*
Digital and Dolby Pro Logic (II) adaptive
matrix surround decoder and the DTS**
Digital Surround System.
• Do not use solvents such as benzine,
thinner, commercially available cleaners,
or anti-static spray intended for vinyl LPs.
* Manufactured under license from Dolby
Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol
are trademarks of Dolby Laboratories.
**Manufactured under license from Digital Theater
Systems, Inc.
This system can only play back a standard
circle disc. Using neither standard nor
circular discs (e.g., card, heart, or star shape)
may cause a malfunction.
“DTS” and “DTS Digital Surround” are
trademarks of Digital Theater Systems, Inc.
Do not use a disc that has a commercially
available accessory attached, such as a label
or ring.
9GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Note on DVD 5-disc
changer
Disc changer system
Stocker
DISC 1
DISC 2
Disc
DISC 3
DISC 4
DISC 5
Playing unit
The disc changer consists of a playing
unit and a stocker which transports the
discs to the disc slot and the playing
unit.
For example, if you press DISC 3, the
stocker moves until the DISC 3 comes to
the position of the playing unit and then
moves the DISC 3 over the playing unit.
Notes
• Do not insert or eject discs while playing.
• Noise may come from the disc changer when
changing discs or turning the system on and off.
However, this is just noise produced by the
operation of the internal mechanisms and does
not indicate a malfunction.
• 8 cm (3-inch) CDs or DVDs cannot be stored in
the stocker.
• Do not insert an 8 cm (3-inch) CD with an 8 cm
(3-inch) adapter. It may damage the system and
disc.
10GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Index to Parts and Controls
For more information, refer to the pages indicated in parentheses.
Front Panel
8 PHONES jack (32)
9 VOLUME control (32)
0 SOUND FIELD –/+ (51)
qa DISPLAY (64)
1 POWER switch (32)
2 STANDBY indicator (32)
3 DISC 1 (play) /A (Eject)/indicator –
DISC 5 (play) /A (Eject)/indicator (32)
4 H (play) (32)
qs BAND (30)
qd FUNCTION (63)
qf Disc slot (32)
5 X (pause) (33)
6 x (stop) (33)
qg Front panel display (12)
qh (remote sensor) (18)
7 ./> PREV/NEXT, PRESET –/+
(33)
continued11GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Front Panel Display
When playing back a DVD
Lights up when you can
change the angle
Current chapter number
Current sound Playing status
TITLE
CHAPTER
H
M
S
ANGLE
PCM
DIGITAL
REPEAT 1
PRO LOGIC
ALL 1 DISC S
Play mode
Current title number
Playing time
Current repeat
mode
Current surround format
When playing back a Super Audio CD, CD,VIDEO CD, or MP3
Current index number
(The index indicator does not appear during Super
Lights up during
PBC playback
Audio CD or MP3 playback.)
(VIDEO CD only)
Current sound
TRACK
INDEX
M
S
SACD
DIGITAL
PCM
REPEAT 1
PROG PBC
SHUFFLE
ALL 1 DISC S
Play mode
Current track number
Playing time
Current play mode
Playing status
When listening to the radio
Preset number
Monaural/Stereo effect
TUNED
MONO ST
FM AM
MHz
Current band
Current station
12GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear Panel
SCAN SELECT
COMPONENT
VIDEO OUT
MONITOR
OUT
FRONT
L
VIDEO
S
VIDEO
VIDEO
AUDIO OUT
L
1
VIDEO
AUDIO IN
L
2
FRONT
R
VIDEO OUT
SELECTABLE
INTERLACE
VIDEO IN
AM
CENTER
WOOFER
R
R
R
DVD
ONLY
R
E
A
R
R
E
A
R
COAXIAL
OPTICAL
DIGITAL
IN
R
L
FM
75Ω
SPEAKER
L
AUDIO IN
VIDEO IN
Y
PB/CB
PR/CR
VIDEO
2
COMPONENT VIDEO OUT
1 SPEAKER jacks (19)
2 AM antenna (21)
6 MONITOR OUT (VIDEO/S VIDEO)
jacks (24)
3 VIDEO 1 jacks (23)
4 VIDEO 2 jacks (23)
5 COMPONENT VIDEO OUT/SCAN
SELECT switch (75)
7 VIDEO 2 (OPTICAL DIGITAL IN)
jack (24)
8 COMPONENT VIDEO OUT jacks (23)
9 FM 75Ω COAXIAL antenna jack (21)
continued13GB
Download from Www.Somanuals.com. All Manuals Search And Download.
1 TV [/1 (on/standby) (62)
2 Z (EJECT) (33)
3 NAME (66)
Remote
4 STEREO/MONO (64)
5 MEMORY (30)
6 CLEAR (40)
7 PLAY MODE (39)
8 AUDIO (49)
9 ANGLE (55)
q; SUBTITLE (56)
qa VOL +/– (63)
qs ./> PREV/NEXT, TV CH –/+,
PRESET –/+ (30, 33, 63)
1
4
7
2
5
3
6
9
8
>
10
10/0
qd H PLAY/SELECT (32)
qf DVD TOP MENU (35)
qg DVD DISPLAY (42)
qh C/X/x/c/ENTER (26)
qj DVD SETUP (59)
qk 1 (standby) (33)
ql DISC SKIP (32)
w; TV/VIDEO (63)
wa REPEAT (42)
ws MUTING (33)
wd TIME (46)
wf FUNCTION (63)
wg BAND (30)
wh Number buttons (35)
wj SOUND FIELD (51)
wk DISPLAY (64)
wl ENTER (62)
e; COMMAND MODE DVD TV switch
(63)
Note
This remote control glows in the dark. However,
before glowing, the remote must be exposed to light
for awhile.
ea m/M/
/
SLOW, TUNING –/+
(30, 43)
es x STOP (33)
ed X PAUSE (33)
ef DVD MENU (35)
eg O RETURN (36)
eh AMP MENU (26)
14GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the Control Menu Display
Use the Control Menu to select a function that you’d like to use. The Control Menu display
appears when the DVD DISPLAY button is pressed. For details, refer to the page in
parentheses.
Control Menu
Total number of titles
or tracks recorded
Current playing title number (Video CD/
Super Audio CD/CD: track number)
Total number of chapters or indexes recorded
Disc name
or disc type
Current playing
title name
Playback status
(NPlayback, XPause, xStop, etc.)
Current playing chapter
Disc number
number (Video CD/Super
Audio CD/CD: index number)
1:DVD
DVD
Type of disc being
played back
(
)
1 2 2 7 MAKING SCENE
(
)
1 8 3 4
1 : 3 2 : 5 5
Playing time
T
Current setting
Options
1: ENGLISH
2: FRENCH
3: SPANISH
Icon of selected
Control Menu item
Control Menu items
SUBTITLE
Select:
Function name of selected
Control Menu item
ENTER
Operation message
List of Control Menu Items
DISC
Displays the disc name or the disc type
inserted into the system.
TITLE (DVD only) (page 44)/
Selects the title (DVD), the scene (VIDEO
CD in PBC playback), or the track
(VIDEO CD) to be played.
SCENE (only VIDEO CD in PBC
playback)/TRACK (VIDEO CD only)
(page 44)
CHAPTER (DVD only) (page
Selects the chapter (DVD) or the index
(VIDEO CD) to be played.
45)/INDEX (VIDEO CD only) (page 45)
ALBUM (MP3 only) (page 44)
Selects the album (MP3) to be played.
TRACK (Super Audio CD/CD/
MP3 only) (page 44)
Selects the track (Super Audio CD/CD/
MP3) to be played.
INDEX (Super Audio CD/CD only) Displays the index and selects the index
(page 45)
TIME (page 45)
(Super Audio CD) to be played.
Checks the elapsed time and the remaining
playback time.
Inputs the time code for picture and music
searching.
15GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Changes the audio setting.
AUDIO (DVD/VIDEO CD/
Super Audio CD/CD only) (page 49)
Displays the subtitles.
SUBTITLE (DVD only) (page
56)
Changes the subtitle language.
Changes the angle.
ANGLE (DVD only) (page 55)
Selects the play mode.
PLAYMODE (VIDEO CD/
Super Audio CD/CD/MP3 only) (page 38)
Plays the entire disc (all titles/all tracks/
Album) repeatedly, or one title/chapter/
track/Album repeatedly.
REPEAT (page 42)
Sets the disc to prohibit playing.
CUSTOM PARENTAL
CONTROL (page 57)
z Each time you press DVD DISPLAY, the Control Menu display changes as follows:
Control Menu display
m
,
Control Menu display off
The Control Menu items are different depending on the disc.
z The Control Menu icon indicator lights up in green
“OFF.”
t
unless you set the REPEAT setting to
The “ANGLE” indicator lights up in green only when the angles can be changed.
16GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Quick Overview
This chapter presents a quick overview so you can begin enjoying your new system right away.
For selecting a language used in the on-screen display, refer to the page 68.
For selecting the aspect ratio of the TV to be connected, refer to the page 69.
Unpacking
Check that you have the following items:
• Speakers (5)
• Subwoofer (1)
• AM loop antenna (1)
• FM wire antenna (1)
• Speaker cords (5m × 4, 15m × 2) (17ft. × 4, 50ft. × 2)
• Video cord (1)
• Remote Commander (remote) RM-SS990 (1)
• R6 (size AA) batteries (2)
• Foot pads (20)
• Speakers-connection and Installation (card) (1)
• 21-pin Adapter (1) (Only for the European models)
17GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Inserting Batteries into the Remote
You can control the system using the supplied remote. Insert two R6 (size AA) batteries by
matching the 3 and # ends on the batteries to the markings inside the compartment. When
using the remote, point it at the remote sensor on the system.
Notes
• Do not leave the remote in an extremely hot or humid place.
• Do not use a new battery with an old one.
• Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
• Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so may cause a
malfunction.
• If you do not use the remote for an extended period of time, remove the batteries to avoid possible damage from
battery leakage and corrosion.
Step 1: Speaker System Hookup
Connect the supplied speaker system using the supplied speaker cords by matching the colors
of the terminals to those of the cords. Do not connect any speakers other than those supplied
with this system.
To obtain the best possible surround sound, specify the speaker parameters (distance, level, etc.)
on page 26.
Required cords
Speaker cords
The connector and the color tube of the speaker cords are the same color as the label of the
terminals to be connected.
Grey
(+)
(+)
(–)
(–)
Color tube
Black
18GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Terminals for connecting the speakers
Connect the
Front speakers
Rear speakers
Center speaker
Subwoofer
To the
SPEAKER FRONT L (white) and R (red) terminals
SPEAKER REAR L (blue) and R (grey) terminals
SPEAKER CENTER (green) terminal
SPEAKER WOOFER (purple) terminal
Front speaker (R)
Center speaker
Front speaker (L)
Color label
SCAN SELECT
COMPONENT
VIDEO OUT
MONITOR
OUT
FRONT
L
VIDEO
S
VIDEO
VIDEO
AUDIO OUT
L
1
VIDEO
AUDIO IN
L
2
FRONT
R
VIDEO OUT
SELECTABLE
INTERLACE
VIDEO IN
AM
CENTER
WOOFER
R
R
R
DVD
ONLY
R
E
A
R
R
E
A
R
COAXIAL
OPTICAL
DIGITAL
IN
R
L
FM
75Ω
SPEAKER
L
AUDIO IN
VIDEO IN
Y
PB/CB
PR/CR
VIDEO
2
COMPONENT VIDEO OUT
Turn over the
subwoofer to
connect the
speaker cord.
Rear speaker (R)
Rear speaker (L)
Subwoofer
Note on placing speakers
Use caution when placing the subwoofer or a speaker stand (not supplied) that is attached with
the front/rear speakers on a specially treated (waxed, oiled, polished, etc.) floor, as staining or
discoloration may result.
19GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To avoid short-circuiting the speakers
Short-circuiting of the speakers may damage the system. To prevent this, be sure to follow these
precautions when connecting the speakers. Make sure the bare wire of each speaker cord does
not touch another speaker terminal or the bare wire of another speaker cord.
Examples of bad conditions of the speaker cord
Exposed end speaker cord
is touching another speaker
terminal.
Exposed end cords are
touching each other due to
sloppy removal of insulation.
After connecting all the components, speakers, and AC power cord (mains lead), output a test
tone to check that all the speakers are connected correctly. For details on outputting a test tone,
see page 28.
If no sound is heard from a speaker while outputting a test tone, or a test tone is output from a
speaker other than the one currently displayed on the front panel display, the speaker may be
short-circuited. If this happens, check the speaker connection again.
Note
Be sure to match the speaker cord to the appropriate terminal on the components: 3 to 3, and # to #. If the
cords are reversed, the sound will be distorted and will lack bass.
20GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Antenna Hookups
Connect the supplied AM/FM antennas for listening to the radio.
Terminals for connecting the antennas
Connect the
To the
AM loop antenna
FM wire antenna
AM terminals
FM 75Ω COAXIAL terminal
AM loop antenna
SCAN SELECT
COMPONENT
VIDEO OUT
MONITOR
OUT
FRONT
L
VIDEO
S
VIDEO
VIDEO
AUDIO OUT
L
1
VIDEO
AUDIO IN
L
2
FRONT
R
VIDEO OUT
SELECTABLE
INTERLACE
VIDEO IN
AM
CENTER
WOOFER
R
R
R
DVD
ONLY
R
E
A
R
R
E
A
R
COAXIAL
OPTICAL
DIGITAL
IN
R
L
FM
75Ω
SPEAKER
L
AUDIO IN
VIDEO IN
Y
PB/CB
PR/CR
VIDEO
2
COMPONENT VIDEO OUT
FM wire antenna
Notes
• To prevent noise pickup, keep the AM loop antenna away from the system and other components.
• Be sure to fully extend the FM wire antenna.
• After connecting the FM wire antenna, keep it as horizontal as possible.
• When you connect the supplied AM loop antenna, connect the black cord (B) to the U terminal, and the white
cord (A) to the other terminal.
A
AM
B
continued21GB
Download from Www.Somanuals.com. All Manuals Search And Download.
z If you have poor FM reception
Use a 75-ohm coaxial cable (not supplied) to connect the system to an outdoor FM antenna as shown below.
System
Outdoor FM antenna
Earth wire
(not supplied)
AM
COAXIAL
FM
75Ω
To earth
Note
If you connect the system to an outdoor antenna, ground it to protect against lightning. To prevent a gas explosion,
do not connect the earth wire to a gas pipe.
22GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3: TV and Video Component Hookups
Required cords
Video cord for connecting a TV monitor
Yellow
Yellow
Audio/video cords (not supplied)
When connecting a cord, be sure to match the color-coded pins to the appropriate jacks on the
components.
Yellow (Video)
White (L/audio)
Red (R/audio)
Yellow (Video)
White (L/audio)
Red (R/audio)
Jacks for connecting video components
Connect a
TV monitor
To the
MONITOR OUT jack
VIDEO 1 jacks
VIDEO 2 jacks
VCR
Digital satellite receiver
z When using the S video jack instead of the video jacks
Your TV monitor must also be connected via an S video jack. S video signals are on a separate bus from the video
signals and will not be output through the video jacks.
z When using the COMPONENT VIDEO OUT jacks (Y, PB/CB, PR/CR) instead of the video jacks
Your TV monitor must also be connected via COMPONENT VIDEO OUT jacks (Y, PB/CB, PR/CR). If your TV
accept progressive format file signals, you must use this connection and set “COMPONENT OUT” to
“PROGRESSIVE” in “SCREEN SETUP” (page 70).
Notes
• When you select VIDEO 1 using the FUNCTION button, the signal is output from the front L/R speakers, but
not from the VIDEO 1 VIDEO OUT and AUDIO OUT L/R jacks.
• When you use the Video 1 line outputs, please set the unit to 2CH STEREO mode. If the unit is not in 2CH
STEREO mode, the line outputs may not function properly.
• When “PROGRESSIVE” is selected in “SCREEN SETUP,” no signal is output from the MONITOR OUT or S-
VIDEO OUT jacks.
• When the mode of the system is set to “DVD,” the signal is output from the S VIDEO OUT or COMPONENT
OUT jacks.
• When the mode of the system is set to “DVD” and “PROGRESSIVE” is selected in “SCREEN SETUP,” the
signal is output only from the COMPONENT OUT jacks.
continued23GB
Download from Www.Somanuals.com. All Manuals Search And Download.
SCAN SELECT
COMPONENT
VIDEO OUT
MONITOR
OUT
FRONT
L
VIDEO
S
VIDEO
VIDEO
AUDIO OUT
L
1
VIDEO
AUDIO IN
L
2
FRONT
R
VIDEO OUT
SELECTABLE
INTERLACE
VIDEO IN
AM
CENTER
WOOFER
R
R
R
DVD
ONLY
R
E
A
R
R
E
A
R
COAXIAL
OPTICAL
DIGITAL
IN
R
L
FM
75Ω
SPEAKER
L
AUDIO IN
VIDEO IN
Y
P
B/CB
PR/CR
VIDEO
2
COMPONENT VIDEO OUT
IN
OUT
OUT
OUT
IN
INPUT
VIDEO
IN
VIDEO
IN
VIDEO
OUT
VIDEO
OUT
AUDIO
IN
AUDIO
OUT
AUDIO
OUT
L
L
OUTPUT
R
R
OPTICAL
VCR
Digital satellite receiver
TV monitor
If you connect a digital satellite receiver with the OPTICAL jack
The digital satellite receiver can be connected to the OPTICAL jack instead of the VIDEO IN
and AUDIO IN L/R jacks of the system.
The system can accept both the digital and analog signals. Digital signals have priority over
analog signals. If the digital signal ceases, the analog signal will be processed after 2 seconds.
If you connect a digital satellite receiver without the OPTICAL jack
Connect the digital satellite receiver to the VIDEO IN and AUDIO IN L/R jacks only of the
system.
Setup for the system (for Asian and Australian models)
Setup is necessary for the system, depending on the TV monitor to be connected.
The initial setting for Asian models is NTSC but Australian models is PAL.
If the color system of the TV is PAL*
To set the system to PAL, turn on the system by pressing 1 (power) on the remote while
pressing X (pause) button on the system. You need to hold the X button until DAV-C770
appears on the display. To reset to NTSC, turn off the system and then turn on again using the
remote while pressing the X button on the system.
*If the color system of the TV is NTSC, do the same operation above to set the system to
NTSC.
Connecting the AC Power Cord (mains lead)
Before connecting the AC power cord (mains lead) of this system to a wall outlet (mains),
connect the speakers to the system (see page 19).
Connect the AC power cord (mains lead) of your TV/video components to a wall outlet (mains).
24GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker Setup
For the best possible surround sound, all the speakers other than the subwoofer should be the
same distance from the listening position (A).
However, this system allows you to place the center speaker up to 1.6 meters (5.0 feet) closer
(B) and the rear speakers up to 4.6 meters (15.0 feet) closer (C) to the listening position.
The front speakers can be placed from 1.0 to 15.0 meters (3.0 to 50.0 feet) (A) from the
listening position.
You can place the rear speakers either behind you or to the side, depending on the shape of your
room, etc.
When the rear speakers are placed to the side
When the rear speakers are placed behind you
B
B
A
A
A
A
45°
45°
C
C
C
C
90°
90°
20°
20°
Note
Do not place the center and rear speakers farther away from the listening position than the front speakers.
About magnetically shielded speaker (to prevent color irregularity occurring on
the TV screen)
The subwoofer in this system is magnetically shielded to prevent magnetic leakage. However,
some leakage may occur, as a high-strength magnet is employed. If the subwoofer is used with
a CRT-based TV or projector, install the subwoofer at least 0.3 meters (1.0 ft) from the TV set,
etc. If it is installed too close, color irregularity may occur on the screen.
If color irregularity occurs…
Turn off the TV set once, then turn it on after 15 to 30 minutes.
If color irregularity occurs again…
Place the subwoofer farther away from the TV set.
If color irregularity still occurs after performing the above…
Make sure that no magnetic object is nearby the subwoofer. Color irregularity may occur as a
result of interaction between the subwoofer and the magnetic object.
Examples of possible sources of magnetic interference include: magnetic latches on a TV stand,
etc., healthcare devices, toys, etc.
continued25GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifying the speaker parameters
To obtain the best possible surround sound, first specify the distance of the speakers from your
listening position, then set the balance and level. Use the test tone to adjust the speaker volumes
to the same level.
You may adjust the speaker parameters using SPEAKER SETUP in the setup display (page 72).
1
4
7
2
5
3
6
9
8
>
10
10/0
C/X/x/c/ENTER
AMP MENU
To specify the size, distance, position and height of the speakers
1 Press AMP MENU repeatedly to display 9 SP. SETUP on the front panel display.
2 Sit in your listening position and select the item to be set using X/x.
• Items set in 9 SP. SETUP
–Size of the rear and center speakers
–Distance of the front, rear, and center speakers
–Position and height of the rear speakers
3 Set the parameter using C/c.
The selected parameter will appear on the front panel display.
4 Repeat Steps 2 and 3 to set other parameters in 9 SP. SETUP.
If you do not operate the remote for a few seconds, the parameter disappears from the
display and is stored in the system.
xSIZE
When you do not connect center or rear speakers, or move the rear speakers, set the parameters
for CENTER and REAR. Since the front speaker and subwoofer settings are fixed, you cannot
change them. The default settings are underlined.
• CENTER (center speaker)
–YES: Normally select this.
–NO: Select this if no center speaker is used.
• REAR (rear speakers)
–YES: Normally select this. Specify the position and height to implement the Digital Cinema
Surround modes.
–NO: Select this if no rear speaker is used.
26GB
Download from Www.Somanuals.com. All Manuals Search And Download.
xDISTANCE
You can vary the distance of each speaker as follows. The default settings are underlined.
• F. D. 5 m (17 ft) (front speakers distance)
Front speaker distance can be set in 0.2 m (1.0 foot) steps from 1.0 to 15.0 m (3.0 to 50.0
feet).
• C. D. 5 m (17 ft) (center speaker distance)
Center speaker distance can be set in 0.2 m (1.0 foot) steps from a distance equal to the front
speaker distance to a distance 1.6 m (5.0 feet) closer to your listening position.
• R. D. 3.4 m (12 ft) (rear speakers distance)
Rear speaker distance can be set in 0.2 m (1.0 foot) steps from a distance equal to the front
speaker distance to a distance 4.6 m (15.0 feet) closer to your listening position.
Notes
• If each of the front or rear speakers are not placed an equal distance from your listening position, set the distance
of the closest speaker.
• In SPEAKER SETUP, the North American model’s OSD displays both metric and imperial measurements. The
other model's displays metric measurements only. The manual shows both.
Specifying the rear speaker position and height
If you select anything other than “NO” in “REAR,” specify the position and height of the rear
speakers. The default settings are underlined.
Position diagram
90
A
A
45
B
B
20
• R. P. BEHIND
Select this if the rear speakers are located in the section B.
• R. P. SIDE
Select this if the rear speakers are located in the section A.
continued27GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Height diagram
C
D
C
D
60
30
• R. H. LOW
Select this if the rear speakers are located in section D.
• R. H. HIGH
Select this if the rear speakers are located in section C.
These parameters are not available when “REAR” is set to “NO”.
To specify the balance and level of the speakers
1 Press AMP MENU repeatedly to display 9 LEVEL on the front panel display.
2 Use X/x to select T.TONE and use C/c to set T.TONE to ON.
You will hear the test tone from each speaker in sequence.
3 Sit in your listening position and select the item to be adjusted using X/x.
• Items adjusted in 9 LEVEL
–Balance of the front and rear speakers
–Volume level of the center and rear speakers and subwoofer
4 Adjust the volume level so that the volume of the test tone from each speaker sounds the
same using C/c.
The adjusted value will appear on the front panel display.
5 Repeat Steps 3 and 4 to adjust other parameters in 9 LEVEL.
If you do not operate the remote for a few seconds, the value disappears from the display
and is stored in the system.
6 Use X/x to select T.TONE and use C/c to set T.TONE to OFF.
xBALANCE
You can vary the balance of each speaker as follows. The default settings are underlined.
• F. ___I___ center (front speakers)
Adjust the balance between the front left and right speakers (You can adjust from center,
6 steps left or right).
• R. ___I___ center (rear speakers)
Adjust the balance between the rear left and right speakers (You can adjust from center,
6 steps left or right).
28GB
Download from Www.Somanuals.com. All Manuals Search And Download.
xLEVEL
You can vary the level of each speaker as follows. The default settings are underlined.
• C. LEVEL 0 dB (center speaker level)
Adjust the level of the center speaker (–6 dB to +6 dB, 1 dB steps).
• R. LEVEL 0 dB (rear speakers level)
Adjust the level of the rear speakers (–6 dB to +6 dB, 1 dB steps).
• S.W. LEV. 0 dB (subwoofer level)
Adjust the level of the subwoofer (–6 dB to +6 dB, 1 dB steps).
Notes
• When you select an item, the sound cuts off for a moment.
• Depending on the settings of other speakers, the subwoofer may output excessive sound.
To adjust the volume of all the speakers at one time
Use the VOLUME control.
Other AMP MENU settings
You can control the brightness of the front panel display, clear the preset stations and the station
names, and set the speaker parameters back to the default setting. Press AMP MENU repeatedly
to display 9 CUSTOMIZE. Use X/x to select the following items.
xDIMMER
You can change the brightness of the front panel display by two steps.
xMEMO. CLR.
• N (No): Skip back to previous menu.
• Y (Yes): If you select Y by pressing ENTER, “Really? N” and “Really? Y” appears.
If you select “Really? Y,” by pressing ENTER, “ALL CLEAR!” is displayed and all settings
such as preset stations and station names will be cleared, and speaker parameters will be
defaulted.
This system incorporates with Dolby Pro Logic II which has movie mode and music mode, and
the system can reproduce the 2 channel sound in 5.1 channel through Dolby Pro Logic II.
When the Sound Field is set to “NORMAL SURROUND,” you can select the type of decoding
for 2 channel source. Press AMP MENU repeatedly to display 92CH MODE. Use X/x to select
the following items.
x2CH MODE
• PLII MOVIE (Pro Logic II Movie): Performs the Pro Logic II movie mode decoding. This
setting is ideal for the movies encoded in Dolby Surround. Besides, this mode can reproduce
the sound in 5.1 channel when watching the videos of old movies or in the dubbed language.
• PLII MUSIC (Pro Logic II Music): Performs the Pro Logic II music mode decoding. This
setting is ideal for the normal stereo sources, such as CDs.
• PRO LOGIC: Performs the Pro Logic decoding. The source recorded in 2 channel is decoded
into 4 channels.
Note
Dolby Pro Logic II does not function for DTS or MPEG format signals or Super Audio CD.
29GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Presetting Radio Stations
You can preset 20 stations for FM and 10 stations for AM.
Before tuning, make sure to turn down the volume to minimum.
1
MEMORY
1
4
7
2
5
3
6
9
BAND
8
>
10
10/0
PRESET –/+
TUNING –/+
ENTER
1 Press BAND repeatedly until the band you want appears on the front panel
display.
Every time you press BAND, the band changes to AM or FM alternately.
2 Press and hold TUNING + or – until the frequency indication starts to change,
then release.
Scanning stops when the system tunes in a station. “TUNED” and “ST” (for stereo
program) appear on the front panel display.
TUNED
ST
PCM
FM
AUTO
MHz
3 Press MEMORY.
A preset number appears on the front panel display.
TUNED
ST
FM
MHz
4 Press PRESET + or – to select the preset number you want.
TUNED
ST
FM
MHz
30GB
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Press ENTER.
The station is stored.
ALL1DISC S AUTO
PRO LOGIC
TITLE
TRACK
CHAPTER INDEX
H
TUNED
M MONO ST S
dB REPEAT
1
DIGITAL FM AM
kHz PROGRAM
MHz SHUFFLE
NTSC PBC ANGLE
v
ALL1DISC S AUTO
PRO LOGIC
TITLE
TRACK
CHAPTER INDEX
H
TUNED
M
MONO ST S
dB REPEAT
kHz PROGRAM
MHz SHUFFLE
1
DIGITAL FM AM
NTSC PBC ANGLE
6 Repeat 1 to 5 to store other stations.
To tune in a station with a weak signal
Press TUNING + or – repeatedly in 2 to tune in the station manually.
To change the preset number
Start over from 1.
To change the AM tuning interval (except for European, Middle Eastern, and
Philippine models)
The AM tuning interval is factory set to 9 kHz (10 kHz in some areas).
To change the AM tuning interval, tune in any AM station first, then turn off the system by
pressing 1 on the remote. While holding down x (on the system), turn on the power using the
remote. When you change the interval, AM preset stations will be erased.
To reset the interval, repeat the same procedure.
31GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing Discs
4
5
Press DISC 1–5 A.
Press the button of the disc number
you want.
“READY!” appears in the front panel
display and the system is ready for
loading the disc.
Example: When you want to load the
disc to the disc stocker 1, press DISC 1
A.
If there is a disc in the stocker that you
select, the disc is ejected, “READY!”
appears in the front panel display, then
the system is ready for loading the
disc.
Playing Discs
Depending on the DVD or VIDEO CD,
some operations may be different or
restricted.
Refer to the operating instructions supplied
with your disc.
H
POWER
DISC 1-5 /A/ indicators
x
Load a disc.
FUNCTION
Push the disc into the disc slot until the
disc is pulled in automatically.
The disc is drawn into the selected disc
stocker automatically.
STANDBY indicator
Adjust the volume Connect
headphones
Z (EJECT)
1
DISC SKIP
With the playback side facing down
1
4
7
2
5
3
6
9
FUNCTION
8
>
10
10/0
To load other discs, press DISC 1-5 A
(that is not loaded a disc) and load the
disc after “READY!” appears in the
front panel display.
H
x
1
2
Turn on your TV.
6
Press H.
The system starts playback
(continuous play) of the disc whose
DISC indicator is green.
Switch the input selector on the TV
to this system.
To playback other discs, press DISC
SKIP on the remote or DISC 1-DISC 5
of the system.
3
Press POWER on the system.
The system turns on.
Unless the mode of the system is set to
“DVD,” press FUNCTION to select
“DVD.”
Adjust the volume on the system.
After following Step 6
Depending on the disc, a menu may appear
on the TV screen. You can play the disc
interactively by following the instructions
on the menu. DVD (page 35), VIDEO CD
(page 35).
32GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To remove the disc
Additional operations
Press DISC 1-5 A on the system, or Z on
the remote. When you press Z on the
remote, the disc in the stocker whose DISC
indicator is green is ejected. Remove the
disc after it is ejected from the system.
“READY!” appears in the front panel
display.
Z (EJECT)
DISC SKIP
MUTING
1
4
7
2
5
3
6
9
8
>
10
10/0
To turn on the system
Press POWER on the system. The system
turns on. In standby mode, the system also
turns on by pressing A on the system or by
pressing H.
./>
H
x
X
To turn off the system
To
Operation
Press x.
Press 1 on the remote. The system enters
standby mode and the STANDBY indicator
lights up in red. To turn off the system
completely, press POWER on the system.
While playing a disc, do not turn off the
system by pressing POWER. Doing so may
cancel the menu settings. When you turn off
the system, first press x to stop playback
and then press 1 on the remote.
Stop
Pause
Press X.
Resume play after
pause
Press X or H.
Go to the next chapter,
track, or scene in
continuous play mode
Press >.
Go back to the
Press ..
preceding chapter, track,
or scene in continuous
play mode
z On Auto-Function
If a disc is already loaded to any disc stocker, you can
play it back simply by pressing the H or its
corresponding DISC 1-DISC 5, even if the previous
music source was not a DVD. The function changes
to DVD and playback starts (Auto-Function).
However, if Program Play is on, you can only start
playback by pressing the H.
Stop play and remove
the disc
Press Z.
Mute the sound
Press MUTING. To
cancel muting, press it
again or turn up the
volume.
Change a disc while
playing another disc
Press DISC SKIP.
z On the DISC 1-5 indicators
The DISC 1-5 indicators change their colors as
follows:
– green: the disc is chosen, or the disc is being play
backed.
– off: there is no disc.
– orange: a disc is loaded to the disc stocker,
however, the disc is not chosen.
Play the desired disc
directly
Press DISC 1-5 on
the system
Stop play and remove
the desired disc
Press DISC 1-5 A on
the system
Saving the power in standby mode
Note
Press 1 on the remote once.
If there is no disc in any disc tray, “READY!”
appears on the front panel display.
z While the system is in standby mode, the
STANDBY indicator on the system lights up.
To cancel standby mode
Press 1 on the remote once.
33GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
Resuming Playback from
the Point Where You
Stopped the Disc (Resume Play)
• Depending on where you stopped the disc, the
system may not resume playback from exactly the
same point.
• The point where you stopped playing is cleared
when:
– you turn the power off by pressing POWER on
the system.
– you change the play mode.
– you change the setting on the Setup Menu.
When you stop the disc, the system
remembers the point where you pressed x
and “RESUME” appears on the front panel
display. As long as you do not remove the
disc, Resume Play will work even if the
system enters standby mode by pressing 1.
>
10
10/0
x
H
1
2
While playing a disc, press x to
stop playback.
“RESUME” appears on the front panel
display, so you can restart the disc
from the point where you stopped the
disc.
If “RESUME” does not appear,
Resume Play is not available.
Press H.
The system starts playback from the
point where you stopped the disc in
Step 1.
z To play from the beginning of the disc, press x
twice, then press H.
34GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the DVD’s Menu
Playing VIDEO CDs with
PBC Functions (PBC Playback)
A DVD is divided into long sections of a
picture or a music feature called “titles.”
When you play a DVD which contains
several titles, you can select the title you
want using DVD TOP MENU.
When you play DVDs that allow you to
select items such as the language for the
subtitles and the language for the sound,
select these items using DVD MENU.
With PBC (Playback Control) functions,
you can enjoy simple interactive operations,
search functions, and other such operations.
PBC playback allows you to play VIDEO
CDs interactively by following the menu on
the TV screen.
1
4
7
2
5
3
6
9
Number
buttons
1
4
7
2
5
3
6
9
8
Number
buttons
>
10
10/0
8
>
10
10/0
./>
H
x
O RETURN
DVD MENU
DVD TOP
MENU
ENTER
X/x
ENTER
C/X/x/c
1
2
3
Start playing a VIDEO CD with PBC
functions.
1
Press DVD TOP MENU or DVD
The menu for your selection appears.
MENU.
The disc’s menu appears on the TV
screen.
Select the item number you want
by pressing X/x or the number
buttons.
The contents of the menu vary from disc
to disc.
2
3
Press C/X/x/c or the number
buttons to select the item you
want to play or change.
Press ENTER.
Press ENTER.
continued35GB
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Follow the instructions in the
menu for interactive operations.
Refer to the instructions supplied with
the disc, as the operating procedure
may differ according to the VIDEO
CD.
Playing an MP3 Audio
Track
You can play back data CDs (CD-ROMs/
CD-Rs/CD-RWs) recorded in MP3 (MPEG1
Audio Layer 3) format.
To go back to the menu
Press O RETURN.
z To play without using PBC, press ./> or
the number buttons while the system is stopped to
select a track, then press H or ENTER.
“Play without PBC” appears on the TV screen and
the system starts continuous play. You cannot play
still pictures such as a menu. To return to PBC
playback, press x twice, then press H.
1
2
Load a data disc recorded in MP3
into the system.
Press H.
The system starts to play the first MP3
audio track in the first album on the
disc.
Note
Depending on the VIDEO CD, “Press ENTER” in
Step 3 may appear as “Press SELECT” in the
instructions supplied with the disc. In this case, press
H.
Note
The player can play MP3 audio tracks recorded in the
following sampling frequencies: 32 kHz, 44.1 kHz,
48 kHz.
Selecting an album and track
1
4
7
2
5
3
6
9
8
>
10
10/0
O RETURN
DVD DISPLAY
ENTER
X/x/C/c
1 Press DVD DISPLAY.
The Control Menu and disc name of
MP3 data disc appear.
36GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
2 Press X/x to select
(ALBUM)
• Only the letters in the alphabet and numbers can be
used for album or track names. Anything else is
displayed as “ ”.
• If the MP3 file you play back has an ID3 tag, the
ID3 tag information is displayed as a track name.
then press ENTER or c.
The list of albums contained in the disc
appears.
2:MP3
MP3
About MP3 audio tracks
ROCK BEST HIT
KARAOKE
You can play MP3 audio tracks on CD-
ROMs, CD-Rs, or CD-RWs. However, the
discs must be recorded according to
ISO9660 level 1, level 2, or Joliet format for
the system to recognize the tracks. You can
also play discs recorded in Multi Session.
See the instructions of the CD-R/RW device
or recording software (not supplied) for
details on the recording format.
JAZZ
R&B
MY FAVORITE SONGS
CLASSICAL
SALSA OF CUBA
BOSSANOVA
3 Select an album you want to play using
X/x and press ENTER.
To play a Multi Session CD
4 Select
(TRACK) using X/x
The system can play Multi Session CDs
when an MP3 audio track is located in the
first session. Any subsequent MP3 audio
tracks, recorded in the later sessions, can
also be played back.
When audio tracks and images in music CD
format or video CD format are recorded in
the first session, only the first session will be
played back.
and press ENTER.
The list of tracks contained in the
current album appears.
2:MP3
ROCK BEST HIT
MP3
1.HIGHWAY
2.VIEW POINT
3.MY CHILDREN
4.DANCING
5.GOOD TASTE
6.DESTINATION
7.MARATHON
8.PLACE-KICK
9.TAKE IT EASY
10.PORT TOWER
Notes
• If you put the extension “.MP3” to data not in MP3
format, the system cannot recognize the data
properly and will generate a loud noise which could
damage your speaker system.
• The system cannot play audio tracks in MP3PRO
format.
When the list of all tracks or albums
cannot be displayed on the window, the
jump bar appears. Press c to select the
jump bar icon, and then scroll the jump
bar to display the rest of the list using X/
x.
5 Select a track using X/x and press
ENTER.
The Selected track starts playing.
To return to the previous display
Press O RETURN or C.
To turn off the display
Press DVD DISPLAY.
37GB
Download from Www.Somanuals.com. All Manuals Search And Download.
xALL/ONE/ALBUM
Selecting the Play Mode
• ALL: The system plays all discs in the
system consecutively in the order of the
disc slot number, and you can set Shuffle
Play or Repeat Play for all the discs.
• ONE: The system plays only the one disc
you have selected, and you can set Shuffle
Play or Repeat Play for 1 disc only.
• ALBUM (MP3 only): The system plays
tracks in the Album that is contained on a
MP3 disc, and you can set Shuffle Play or
Repeat Play for the Album. When the disc
except an MP3 disc is played, the system
plays the disc in ONE play mode.
(All Discs, One Disc, or Album)
You can select the play mode that plays all
discs continuously, one disc, or album.
1
4
7
2
5
3
6
9
PLAY MODE
8
>
10
10/0
To return to the previous display
Press ORETURN/EXIT or C.
To turn off the display
Press DVD DISPLAY.
DVD
DISPLAY
X/x
z You can select the play mode directly by pressing
PLAY MODE. Each time you press the button, the play
mode changes.
ENTER
1
2
In stop mode, press DVD DISPLAY.
Press X/x to select
(PLAY MODE), then press ENTER
or c.
2:MP3
MP3
(
)
1 5
CONTINUE (ALL)
CONTINUE (ONE)
CONTINUE (ALBUM)
SHUFFLE (ALL)
SHUFFLE (ONE)
SHUFFLE (ALBUM)
PROGRAM
38GB
Download from Www.Somanuals.com. All Manuals Search And Download.
2
3
Press c, then press X/x to select
Creating Your Own
Program (Program Play)
the disc.
Program
1
2
Disc
DISC1(CD)
DISC2(CD)
DISC3(CD)
DISC4(CD)
DISC5(CD)
3
4
5
6
You can play the contents of a disc in the
order you want by arranging the order of the
tracks on the disc to create your own
7
8
9
10
program. You can program up to 25 tracks.
Press c.
REPEAT
The cursor moves to the track (in this
case, “DISC1(CD)”). Before
programming the MP3 tracks, it is
required to select the album.
CLEAR
1
4
7
2
5
3
6
9
PLAY MODE
8
Number
buttons
>
10
10/0
Program
1
2
Disc
DISC1(CD)
DISC2(
Track
ALL TRACKS
3
4
DISC3(
1 TRACK1
5
DISC4(
2 TRACK2
3 TRACK3
6
DISC5(
H
7
4 TRACK4
5 TRACK5
6 TRACK6
7 TRACK7
8 TRACK8
9 TRACK9
8
9
10
X/x/c
ENTER
When the list of all tracks or albums
cannot be displayed on the window,
the jump bar appears. Press c to select
the jump bar icon, and then scroll the
jump bar to display the rest of the list
using X/x.
1
In stop mode, press PLAY MODE
repeatedly until “ PROGRAM”
appears on the front panel
display.
The program menu appears on the TV
screen.
4
Select the track you want to
program.
For example, select track “7.”
Program
1
2
3
4
Program
5
1
2
Disc
DISC1(
DISC2(
6
7
Track
ALL TRACKS
3
8
9
10
4
DISC3(
1 TRACK1
5
DISC4(
2 TRACK2
3 TRACK3
6
DISC5(
7
4 TRACK4
5 TRACK5
6 TRACK6
7 TRACK7
8 TRACK8
9 TRACK9
8
9
10
continued39GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
5
Press X/x or the number buttons
to select “7” then press ENTER.
• The number and name of tracks displayed are the
same number and name of tracks recorded on a
disc.
• This Program Play function is not available for
DVDs.
Program
1
2
3
4
DISC1(CD)–TRACK7
5
6
7
8
9
10
6
7
To program other tracks, repeat
Steps 2 to 5.
The programmed tracks are displayed
in the selected order.
Press H to start Program Play.
Program Play begins.
When the program ends, you can
restart the same program again by
pressing H.
To return to normal play
Press CLEAR during playback.
To turn off the program menu
In stop mode, press PLAY MODE to turn
off the program menu.
To cancel the programmed order
Press CLEAR in Step 3, and the last
program is canceled one by one.
z You can do Repeat Play of the programmed
tracks. Press REPEAT, or set “REPEAT” to “ALL” in
the Control Menu display during Program Play.
40GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the shuffle mode on the
Control Menu
Playing in random order
(Shuffle Play)
You can select the normal shuffle and album
shuffle (MP3 only).
You can have the system “shuffle” tracks
and play them in random order. Subsequent
“shuffling” may produce a different playing
order.
7
8
9
>
10
10/0
DVD DISPLAY
ENTER
X/x/c
CLEAR
1
4
7
2
5
3
6
9
PLAY MODE
8
>
10
10/0
1 Press DVD DISPLAY.
The Control Menu appears.
H
2 Press X/x to select
(PLAY
MODE), then press ENTER or c.
1
2
In stop mode, press PLAY MODE
repeatedly until “SHUFFLE”
appears on the front panel
display.
You can play all tracks on all discs in a
random order, or all tracks on the
specific disc in a random order. When
you play an MP3 disc, you can play all
tracks in Albums in a random order.
2:MP3
MP3
(
)
1 5
CONTINUE (ALL)
CONTINUE (ONE)
CONTINUE (ALBUM)
SHUFFLE (ALL)
SHUFFLE (ONE)
SHUFFLE (ALBUM)
PROGRAM
3 Select “SHUFFLE (ALL),” “SHUFFLE
(ONE),” or “SHUFFLE (ALBUM)” using
Press H.
X/x and press ENTER.
4 Press H.
The selected shuffle play begins.
To return to normal play
In stop mode, press PLAY MODE
repeatedly until “SHUFFLE” disappears
from the front panel display, or during
playback, press CLEAR to return to normal
play.
41GB
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Select the Repeat Play setting.
Playing repeatedly (Repeat
Play)
1:DVD
DVD
(
)
1 2 2 7 MAKING SCENE
(
)
1 8 3 4
T
1 : 3 2 : 5 5
You can play all the titles/tracks or a single
title/chapter/track on a disc.
In Shuffle or Program Play mode, the
system repeats tracks in the shuffled or
programmed order.
OFF
ALL
TITLE
CHAPTER
You cannot perform Repeat Play during
PBC playback of VIDEO CDs (page 35).
When playing a DVD
• OFF: does not play repeatedly.
• ALL: repeats all the titles (except
SHUFFLE (ALL)).
• TITLE: repeats the current title on a disc.
• CHAPTER: repeats the current chapter
(except SHUFFLE (ALL)).
REPEAT
CLEAR
1
4
7
2
5
3
6
9
PLAY MODE
8
>
10
10/0
When playing a VIDEO CD/Super
Audio CD/CD/MP3 and when Program
H
Play is set to OFF
DVD DISPLAY
• OFF: does not play repeatedly.
• ALL: repeats all the tracks on the disc, or
repeats the current album (MP3 only)
(except SHUFFLE (ALL)).
X/x
ENTER
• TRACK: repeats the current track.
When Program Play is set to ON
• OFF: does not play repeatedly.
• ALL: repeats Program Play.
1
2
Press DVD DISPLAY.
The Control Menu appears.
To cancel Repeat Play
Press CLEAR.
Press X/x to select
(REPEAT), then press ENTER.
If you do not select “OFF,” the
indicator of the “REPEAT” lights in
green.
z You can set Repeat Play during stop
mode
After selecting the “REPEAT” item, press H.
The system starts Repeat Play.
z You can quickly display the “REPEAT”
status
Press REPEAT on the remote.
Note
You can perform Repeat play for DVD titles that
contain chapters.
42GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching for a Scene
Locating a point quickly by playing
a disc in fast forward or fast
reverse (Scan)
Searching for a Particular
Point on a Disc (Scan, Slow-
motion Play)
Press m or M while playing a disc.
When you find the point you want, press
H to return to normal speed.\
You can locate a particular point on a disc
quickly by monitoring the picture or playing
back slowly.
To change the scan speed (DVD/
VIDEO CD/Super Audio CD only)
Each time you press m or M during
scan, the playback speed changes. Two
speeds are available. With each press, the
indication changes as follows:
1
4
7
2
5
3
6
9
Playback direction
8
>
FF1M t FF2M
10
10/0
Opposite direction
SLOW
m/M
/
FR1m t FR2m
H
The FF2M/FR2m playback speed is
faster than FF1M/FR1m.
Watching frame by frame (Slow-
motion play)
Notes
• Depending on the DVD/VIDEO CD, you may not
be able to do some of the operations described.
• This function does not work when you play an
MP3 disc.
You can use this function only for DVDs or
VIDEO CDs. Press
or
when the
system is in the pause mode. To return to
normal speed, press H.
Each time you press
or
during Slow-
motion play, the playback speed changes.
Two speeds are available. With each press,
the indication changes as follows:
Playback direction
SLOW 2 t SLOW 1
Opposite direction (DVD only)
SLOW 2 t SLOW 1
The SLOW 2 /SLOW 2 playback speed
is slower than SLOW 1 /SLOW 1
.
43GB
Download from Www.Somanuals.com. All Manuals Search And Download.
xWhen playing a DVD
Searching for a Title/
Chapter/Track/Index/
Album
(TITLE)
xWhen playing a VIDEO CD
(TRACK)
xWhen playing a Super Audio
CD
You can search a title (DVD), chapter
(DVD), track (CD, VIDEO CD, Super
Audio CD, MP3), index (VIDEO CD, Super
Audio CD), and album (MP3). As titles,
tracks and albums are assigned unique
names on the disc, you can select the desired
one from the Control Menu. Also chapters
and indexes are assigned unique numbers on
the disc, so you select the desired one by
entering its number. Or you can search a
particular point using the time code. (TIME
SEARCH)
(TRACK)
xWhen playing a CD
(TRACK)
xWhen playing an MP3
(ALBUM) or
(TRACK)
Example: when you select
(TRACK)
The list of tracks contained in the disc
appears.
CD
1.HIGHWAY
2.VIEW POINT
CLEAR
3.MY CHILDREN
4.DANCING
1
4
7
2
5
3
6
9
5.GOOD TASTE
6.DESTINATION
7.MARATHON
Number
buttons
8
8.PLACE-KICK
9.TAKE IT EASY
10.PORT TOWER
>
10
10/0
When the list of all tracks or albums
cannot be displayed on the window,
the jump bar appears. Press c to select
the jump bar icon, and then scroll the
jump bar to display the rest of the list
using X/x.
DVD
DISPLAY
X/x/c
ENTER
CD
2.VIEW POINT
3.MY CHILDREN
4.DANCING
5.GOOD TASTE
6.DESTINATION
Searching for a title/track/album
7.MARATHON
8.PLACE-KICK
9.TAKE IT EASY
10.PORT TOWER
11.STANDARD
1 Press DVD DISPLAY.
The Control Menu appears.
2 Press X/x to select the search method,
then press ENTER.
3 Press X/x to select the desired track,
then press ENTER.
The system starts playback from the
selected track.
44GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching for a chapter/index
4 Press X/x or the number buttons to
select the chapter or index number you
want to search.
1 Press DVD DISPLAY.
The Control Menu appears.
If you make a mistake
Cancel the number by pressing
CLEAR, then select another number.
2 Press X/x to select the search method.
xWhen playing a DVD
5 Press ENTER.
(CHAPTER)
The system starts playback from the
selected number.
xWhen playing a VIDEO CD
(INDEX)
xWhen playing a Super Audio
To turn off the Control Menu
Press DVD DISPLAY repeatedly until the
Control Menu is turned off.
CD
(INDEX)
Example: when you select
(CHAPTER)
To search for a particular point
using the time code (TIME SEARCH)
“
(
)” is selected ( refers to a
** **
**
number).
The number in parentheses indicates
the total number of titles, chapters,
tracks, or indexes.
1 In Step 2, select
(TIME).
“T ” (playing time of the
:
:
** ** **
current title or track) is selected.
DVD
DVD
(
)
1 2 2 7 MAKING SCENE
(
)
1 8 3 4
1 : 3 2 : 5 5
2 Press ENTER.
T
“T
:
:
” changes to “T --:--:--.”
** ** **
3 Input the time code using the number
buttons, then press ENTER.
For example, to find the desired point at
2 hours, 10 minutes, and 20 seconds
after the beginning, just enter “2:10:20.”
3 Press ENTER.
“** (**)” changes to “— (**)”.
DVD
DVD
(
)
1 2 2 7 MAKING SCENE
Notes
(
)
– – 3 4
1 : 3 2 : 5 5
• The title, chapter or track number displayed is the
same number recorded on the disc.
T
• You cannot search a scene of a VIDEO CD.
45GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing Information About the Disc
When playing a DVD
Viewing the Playing Time
and Remaining Time on
the Front Panel Display
Playing time and number of the current title
TITLE
TRACK
CHAPTER INDEX
H
TUNED
M MONO ST S
dB REPEAT
1
kHz PROGRAM
MHz SHUFFLE
Remaining time of the
current title
TITLE
TRACK
CHAPTER INDEX
H
TUNED
M MONO ST S
dB REPEAT
1
kHz PROGRAM
MHz SHUFFLE
You can check information about the disc,
such as the remaining time, total number of
titles of a DVD, or tracks of a Super Audio
CD, CD, VIDEO CD, or MP3 using the
front panel display (page 12).
Playing time and number
of the current chapter
TITLE
TRACK
CHAPTER INDEX
H
TUNED
M MONO ST S
dB REPEAT
kHz PROGRAM
MHz SHUFFLE
1
Remaining time of the
current chapter
TITLE
TRACK
CHAPTER INDEX
H
TUNED
M MONO ST S
dB REPEAT
1
kHz PROGRAM
MHz SHUFFLE
TIME
1
4
7
2
5
3
6
9
Title name
TITLE
TRACK
CHAPTER INDEX
H
TUNED
M MONO ST
S
dB REPEAT
kHz PROGRAM
MHz SHUFFLE
1
8
>
10
10/0
When playing a VIDEO CD (without
PBC functions), Super Audio CD, or
CD,
Playing time and current track number
TITLE
TRACK
CHAPTER INDEX
H
TUNED
M MONO ST S
dB REPEAT
1
kHz PROGRAM
MHz SHUFFLE
Press TIME.
Each time you press TIME while playing the
disc, the display changes as shown in the
following charts.
Remaining time of the
current track
TITLE
TRACK
CHAPTER INDEX
H
TUNED
M MONO ST S
dB REPEAT
kHz PROGRAM
MHz SHUFFLE
1
Playing time of the disc
TITLE
TRACK
CHAPTER INDEX
H
TUNED
M MONO ST S
dB REPEAT
1
kHz PROGRAM
MHz SHUFFLE
Remaining time of the
disc
TITLE
TRACK
CHAPTER INDEX
H
TUNED
M MONO ST S
dB REPEAT
1
kHz PROGRAM
MHz SHUFFLE
Track name
TITLE
TRACK
CHAPTER INDEX
H
TUNED
M MONO ST
S
dB REPEAT
1
kHz PROGRAM
MHz SHUFFLE
46GB
Download from Www.Somanuals.com. All Manuals Search And Download.
When playing an MP3
Checking the Playing
Time and Remaining Time
Playing time and current track number
TITLE
TRACK
CHAPTER
H
TUNED
M MONO ST S
dB REPEAT
1
kHz PROGRAM
MHz SHUFFLE
Remaining time of the
current track
TITLE
TRACK
CHAPTER
H
TUNED
M MONO ST S
dB REPEAT
kHz PROGRAM
MHz SHUFFLE
1
You can check the playing time and
remaining time of the current title, chapter,
or track, and the total playing time or
remaining time of the disc. You can also
check the DVD/CD/Super Audio CD text
and MP3 folder name/file name/ID3 tag
(only song title) recorded on the disc.
Track (file) name
TITLE
TRACK
CHAPTER INDEX
H
TUNED
MONO ST
dB REPEAT
kHz PROGRAM
MHz SHUFFLE
1
Album (folder) name
TITLE
TRACK
CHAPTER INDEX
H
TUNED
M MONO ST
S
dB REPEAT
1
kHz PROGRAM
MHz SHUFFLE
TIME
Notes
1
4
7
2
5
3
6
9
• ID3 tag applies only to version 1.
• If the MP3 file you play back has an ID3 tag, the
ID3 tag information is displayed as a track (file)
name.
8
>
10
10/0
• The ID3 tag character codes comply with ASCII
and ISO standards. Joliet format discs can only be
displayed in ASCII. Incompatible characters will be
displayed as “ ”.
• In the following cases, elapsed playing time and
time of the track remaining may not be displayed
accurately.
DVD
DISPLAY
– when an MP3 file of VBR (variable bit rate) is
played.
– during fast-forward/reverse.
1
Press DVD DISPLAY during
playback.
The Control Menu appears.
z When playing VIDEO CDs with PBC functions,
the scene number and the playing time are displayed.
1:DVD
DVD
z The playing time and remaining time of the
current chapter, title, track, scene, or disc will also
appear on your TV screen. See the following section
“Checking the Playing Time and Remaining Time”
for instructions on how to read this information.
(
)
1 2 2 7 MAKING SCENE
(
)
1 8 3 4
1 : 3 2 : 5 5
T
Disc type
Time information
Notes
• While playing Super Audio CD, the index indicator
does not appear on the front panel display.
• Depending on the type of disc being played and the
playing mode, the disc information may not be
displayed.
continued
47GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To turn off the Control Menu
Press DVD DISPLAY repeatedly until the
Control Menu is turned off.
2
Press TIME repeatedly to change
the time information.
The display and the kinds of time that
you can change depend on the disc you
are playing.
Notes
• Only letters of the alphabet can be displayed.
• Depending on the type of disc being played, the
system can only display a limited number of
characters. Also, depending on the disc, all text
characters are not displayed.
xWhen playing a DVD
• T
:
:
** ** **
Playing time of the current title
• T–
:
:
** ** **
Remaining time of the current title
• C
:
:
** ** **
Playing time of the current chapter
• C–
:
:
** ** **
Remaining time of the current
chapter
xWhen playing a VIDEO CD
(with PBC functions)
•
:
** **
Playing time of the current scene
xWhen playing a VIDEO CD
(without PBC functions), Super
Audio CD or CD
• T
:
** **
Playing time of the current track
• T–
:
** **
Remaining time of the current
track
• D
:
** **
Playing time of the current disc
• D–
:
** **
Remaining time of the current disc
xWhen playing an MP3
• T
:
** **
Playing time of the current track
• T–
:
** **
Remaining time of the current
track
48GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Adjustments
3
Press X/x to select the desired
audio signal.
Changing the Sound
xWhen playing a DVD
Depending on the DVD, the choice of
language varies.
When 4 digits are displayed, they
represent the language code. Refer to
the language code list on page 84 to
see which language the code
represents. When the same language is
displayed two or more times, the DVD
is recorded in multiple audio formats.
If a DVD is recorded with multilingual
tracks, you can select the language you want
while playing the DVD.
If the DVD is recorded in multiple audio
formats (PCM, Dolby Digital, MPEG audio,
or DTS), you can select the audio format
you want while playing the DVD.
With stereo CDs or VIDEO CDs, you can
select the sound from the right or left channel
and listen to the sound of the selected channel
through both the right and left speakers. (In
this case, the sound loses its stereo effect.)
For example, when playing a disc containing
a song with the vocals on the right channel
and the instruments on the left channel, you
can select the left channel and hear only the
instruments from both speakers.
xWhen playing aVIDEO CD, or CD
The default setting is underlined.
• STEREO: The standard stereo sound
• 1/L: The sound of the left channel
(monaural)
• 2/R: The sound of the right
channel (monaural)
x
When playing a Super Audio CD
In stop mode, depending on the Super
Audio CD, the choice of settings varies.
• MULTI: The disc has multi-
channel playback area
4
7
5
8
6
9
AUDIO
>
10
10/0
• 2CH: The disc has the 2 channel
playback area.
• CD: When you want to play the
disc as a conventional CD.
DVD
DISPLAY
X/x
ENTER
Note
Not all discs give you the three choices above
when in Super Audio CD playback. It all
depends on the layer configuration of the
Super Audio CD to be played.
1
2
Press DVD DISPLAY during
playback.
The Control Menu is displayed.
4
Press ENTER.
Press X/x to select
To turn off the Control Menu
Press DVD DISPLAY repeatedly until the
Control Menu is turned off.
(AUDIO), then press ENTER.
The options for AUDIO appear.
1:DVD
DVD
(
)
1 2 2 7 MAKING SCENE
z You can select AUDIO directly by pressing AUDIO.
Each time you press the button, the item changes.
(
)
1 8 3 4
1 : 3 2 : 5 5
T
1: ENGLISH
2: FRENCH
3: SPANISH
Notes
• For discs not in multiple audio format, you cannot
change the sound.
• During DVD playback, the sound may change
automatically.
49GB
Download from Www.Somanuals.com. All Manuals Search And Download.
The display examples are as follows:
• PCM (stereo)
Displaying the audio information of
the disc
PROGRAM FORMAT
PCM 48kHz 24bit
When you select “AUDIO,” the channels
being played are displayed on the screen.
For example, in Dolby Digital format,
multiple signals ranging from monaural to
5.1 channel signals can be recorded on a
DVD. Depending on the DVD, the number
of recorded channels may differ.
• Dolby Surround
PROGRAM FORMAT
DOLBY DIGITAL 2/0
DOLBY SURROUND
Current audio format*
• Dolby Digital 5.1ch
1:DVD
DVD
(
)
1 2 2 7 MAKING SCENE
PROGRAM FORMAT
DOLBY DIGITAL 3/2.1
(
)
1 8 3 4
1 : 3 2 : 5 5
1: ENGLISH
T
• DTS
PROGRAM FORMAT
DOLBY DIGITAL 3/2.1
PROGRAM FORMAT
DTS 3/2.1
*“PCM,” “MPEG,” “DTS,” or “DOLBY
DIGITAL” is displayed.
For “DOLBY DIGITAL,” the channels in
the playing track are displayed numerically
as follows:
Notes
• When the signal contains rear signal components
such as LS, RS, or S, the surround effect is
enhanced.
• If you play MPEG AUDIO sound tracks, the
system outputs PCM (stereo) signals.
For Dolby Digital 5.1 ch:
Rear component 2
DOLBY DIGITAL 3 / 2.1
Front component 2 +
Center component 1
LFE (Low Frequency
Effect) component 1
50GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying Surround Sound
Automatically decoding
the input audio signal (Auto
Decoding)
You can take advantage of surround sound
simply by selecting one of the system’s pre-
programmed sound fields. They bring the
exciting and powerful sound of movie
theaters and concert halls into your home.
To select the sound field, press SOUND
FIELD –/+ on the system or SOUND
FIELD on the remote repeatedly until the
sound field you want appears on the front
panel display.
The auto decoding function automatically
detects the type of audio signal being input
(Dolby Digital, DTS, or standard 2 channel
stereo) and performs the proper decoding if
necessary. This mode presents the sound as
it was recorded/encoded, without adding any
effects (e.g. reverberation).
However, if there are no low frequency
signals (Dolby Digital LFE, etc.), it will
generate a low frequency signal for output to
the subwoofer.
Sound field
Auto Decoding
Normal surround
Cinema Studio EX A
Cinema Studio EX B
Cinema Studio EX C
Hall
Display
AUTO DECO.
N.SURROUND
C.S.EX A*
C.S.EX B*
C.S.EX C*
HALL
Jazz Club
JAZZ CLUB
L.CONCERT
GAME
1
4
7
2
5
3
6
9
Live Concert
Game
SOUND
FIELD
8
>
10
10/0
2ch Stereo
2CH STEREO
* Use DCS Technology
About DCS (Digital Cinema Sound)
In the collaboration with Sony Pictures
Entertainment, Sony measured the sound
environment of their studios and integrated
the data of the measurement and Sony’s own
DSP (Digital Signal Processor) technology
to develop “Digital Cinema Sound”.
“Digital Cinema Sound” simulates in a
home theater an ideal movie theater sound
environment based on the preference of
movie director.
Press SOUND FIELD –/+ on the system
or SOUND FIELD on the remote
repeatedly until “AUTO DECO.(AUTO
DECODING)” appears on the front
panel display.
The auto format decode function is
activated.
continued
51GB
Download from Www.Somanuals.com. All Manuals Search And Download.
C.S.EX C (Cinema Studio EX C)
Reproduces the sound characteristics of the
Sony Pictures Entertainment scoring stage.
This mode is ideal for watching musicals or
classic films where music is featured in the
soundtrack.
1
4
7
2
5
3
6
9
SOUND
FIELD
8
>
10
10/0
About Cinema Studio EX
Cinema Studio EX consists of the following
three elements.
• Virtual Multi Dimension
Creates 5 sets of virtual speakers
surrounding the listener from a single pair
of actual rear speakers.
• Screen Depth Matching
In a movie theater, sound seems to come
from inside the image reflected on the
movie screen. This element creates the
same sensation in your listening room by
shifting the sound of the front speakers
“into” the screen.
• Cinema Studio Reverberation
Reproduces the reverberations peculiar to a
movie theater.
Enjoying movies with Cinema Studio
EX
Cinema Studio EX is ideal for enjoying the
movie software encoded with multi channel
format, such as the Dolby Digital DVD.
This mode reproduces the sound
Cinema Studio EX is the integrated mode
which operates these elements
simultaneously.
characteristics of Sony Pictures
Entertainment’s studios.
Press SOUND FIELD –/+ on the system or
SOUND FIELD on the remote repeatedly
until “C.S.EX A (or B, C)” appears on the
front panel display.
Notes
• The effects provided by the virtual speakers may
cause increased noise in the playback signal.
• When listening with sound fields that employ the
virtual speakers, you will not be able to hear any
sound coming directly from the rear speakers.
C.S.EX A (Cinema Studio EX A)
Reproduces the sound characteristics of the
Sony Pictures Entertainment “Cary Grant
Theater” cinema production studio. This is a
standard mode, great for watching most any
type of movie.
Selecting other sound fields
Press SOUND FIELD –/+ on the system or
SOUND FIELD on the remote repeatedly
until the sound field you want appears on
the front panel display.
C.S.EX B (Cinema Studio EX B)
Reproduces the sound characteristics of the
Sony Pictures Entertainment “Kim Novak
Theater” cinema production studio. This
mode is ideal for watching science-fiction or
action movies with lots of sound effects.
The current sound field appears on the front
panel display.
52GB
Download from Www.Somanuals.com. All Manuals Search And Download.
z The system memorizes the last sound
field selected for each function mode (Sound
Field Link)
N. SURROUND (Normal Surround)
Software with multi channel surround audio
signals is played back according to the way
it was recorded. Software with 2 channel
audio signals is decoded with Dolby Pro
Logic or Dolby Pro Logic II to create
surround effects (page 29).
Whenever you select a function such as DVD or
TUNER, the sound field that was last applied to the
function is automatically applied again. For example,
if you listen to DVD with HALL as the sound field,
then change to another function, and then return to
DVD, HALL will be applied again. With the tuner,
sound fields are memorized separately for all preset
stations.
HALL (Hall)
Reproduces the acoustics of a rectangular
concert hall.
z You can identify the encoding format of
program software by looking at its packaging
– Dolby Digital discs are labelled with the
– Dolby Surround encoded programs are labelled
with the logo.
logo.
JAZZ CLUB (Jazz Club)
Reproduces the acoustics of a jazz club.
– DTS Digital Surround discs are marked with DTS.
L. CONCERT (Live Concert)
Reproduces the acoustics of a 300-seat live
concert.
Note
When you play sound tracks with 96 kHz sampling
frequency, the output signals will be converted to
48 kHz (sampling frequency).
GAME (Game)
Obtains maximum audio impact from video
game software.
HP.THEATER (Headphone Theater)
When you connect your headphone to the
PHONES jack of the system, the
HEADPHONE THEATER mode allows you
to experience a theater like environment
while listening through a pair of
headphones. This mode is very effective
with 5.1 ch discrete signal sources like
Dolby Digital and DTS. Selecting any
Sound Field selections (except AUTO
DECODING or 2 CH STEREO) enables the
mode.
To turn the surround effect off
Press SOUND FIELD –/+ on the system or
SOUND FIELD on the remote repeatedly
until “AUTO DECO.” or “2CH STEREO”
appears on the front panel display.
53GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Using only the front
speakers and subwoofer
(2 Channel Stereo)
Adjusting the level
parameters
The level menu contains parameters that let
you adjust the balance and speaker volumes
of each speaker (page 28).
1
4
7
2
5
3
6
9
SOUND
FIELD
8
>
10
10/0
1
4
7
2
5
3
6
9
8
>
10
10/0
C/X/x/c
ENTER
AMP MENU
Press SOUND FIELD –/+ on the system
or SOUND FIELD on the remote
repeatedly until “2CH STEREO”
appears on the front panel display.
This mode outputs the sound from the front
left and right speakers and subwoofer.
Standard two channel (stereo) sources
completely bypass the sound field
processing. Multi channel surround formats
are downmixed to two channels.
1
2
3
4
Start playing a program source
encoded with multichannel
surround sound.
Press AMP MENU repeatedly.
9 LEVEL appears on the front panel
display.
This allows you to play any source using
only the front left and right speakers and
subwoofer.
Sit in your listening position and
select the item to be adjusted
using X/x.
Adjust the volume level using C/c.
The adjusted value will appear on the
front panel display. If you do not operate
the remote for a few seconds, the value
turns off and is stored in the system.
54GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying Movies
3
4
Press c or ENTER.
Changing the Angles
The angle number changes to “-.”
If various angles (multi-angles) for a scene
are recorded on the DVD, “ANGLE”
appears in the front panel display. This
means that you can change the viewing
angle.
For example, while playing a scene of a
train in motion, you can display the view
from either the front of the train, the left
window of the train, or from the right
window without having the train’s
movement interrupted.
1:DVD
DVD
(
)
1 2 2 7 MAKING SCENE
(
)
1 8 3 4
T
–
1 : 3 2 : 5 5
(
)
9
Select the angle number using the
number buttons or X/x, then
press ENTER.
The angle is changed to the selected
angle.
Number
Buttons
1
4
7
2
5
3
6
9
8
ANGLE
To turn off the Control Menu
Press DVD DISPLAY repeatedly until the
Control Menu is turned off.
>
10
10/0
z You can select the angle directly by pressing
ANGLE. Each time you press the button, the angle
changes.
DVD
DISPLAY
X/c/x
ENTER
Note
Depending on the DVD, you may not be able to
change the angles, even if multi-angles are recorded
on the DVD.
1
2
Press DVD DISPLAY during
playback.
The Control Menu appears.
Press X/x to select
(ANGLE).
The angle number appears.
The number in parentheses indicates
the total number of angles.
1:DVD
DVD
(
)
1 2 2 7 MAKING SCENE
(
)
1 8 3 4
T
1
1 : 3 2 : 5 5
(
)
9
55GB
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Press X/x to select the language.
Depending on the DVD, the choice of
language varies.
When 4 digits are displayed, they
indicate the language code. Refer to
the language code list on page 84 to
see which language the code
represents.
Displaying the Subtitles
If subtitles are recorded on the discs, you
can turn the subtitles on and off while
playing. If multilingual subtitles are
recorded on the disc, you can change the
subtitle language while playing, or turn the
subtitles on or off whenever you want. For
example, you can select the language you
want to practice and turn the subtitles on for
better understanding.
Press ENTER.
To cancel the SUBTITLE setting
4
7
5
8
6
9
Select “OFF” in Step 3.
>
10
10/0
SUBTITLE
To turn off the Control Menu
Press DVD DISPLAY repeatedly until the
Control Menu is turned off.
z You can select SUBTITLE directly by pressing
SUBTITLE. Each time you press the button, the item
changes.
DVD
DISPLAY
X/x
ENTER
Note
Depending on the DVD, you may not be able to
change the subtitles even if multilingual subtitles are
recorded on it.
1
2
Press DVD DISPLAY during
playback.
The Control Menu appears.
Press X/x to select
(SUBTITLE), then press ENTER.
The options for SUBTITLE appear.
1:DVD
DVD
(
)
1 2 2 7 MAKING SCENE
(
)
1 8 3 4
T
1 : 3 2 : 5 5
OFF
1: ENGLISH
2: FRENCH
3: SPANISH
56GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Various Additional Functions
3 Press X/x to select
(CUSTOM
PARENTAL CONTROL), then press
ENTER.
Locking Discs (CUSTOM
PARENTAL CONTROL, PARENTAL
CONTROL)
“CUSTOM PARENTAL CONTROL” is
selected.
1:DVD
DVD
(
)
You can set two kinds of playback
restrictions for a disc.
1 2 2 7 MAKING SCENE
(
)
1 8 3 4
T
1 : 3 2 : 5 5
• Custom Parental Control
You can set the playback restrictions so
that the system will not play inappropriate
discs.
ON
PASSWORD
• Parental Control
Playback of some DVDs can be limited
according to a predetermined level such as
the age of the users.
The same password is used for both Parental
Control and Custom Parental Control.
4 Press X/x to select “ON t,” then
press ENTER.
xWhen you have not entered a
password
Custom Parental Control
The display for registering a new
password appears.
You can set the same Custom Parental
Control password for up to 25 discs. When
you set the 26th disc, the playback
restriction of the disc for which you first set
the password is canceled.
CUSTOM PARENTAL CONTROL
Enter a new 4-digit password,
ENTER
then press
.
Number
buttons
1
4
7
2
5
3
6
9
8
Enter a 4-digit password by using the
number buttons, then press ENTER.
The display for confirming the password
appears.
>
10
10/0
x
xWhen you have already
DVD
DISPLAY
C/X/x
O RETURN
ENTER
registered a password
The display for entering the password
appears.
CUSTOM PARENTAL CONTROL
1 Insert the disc you want to lock.
If the disc is playing, press x to stop
playback.
ENTER
Enter password, then press
.
2 In stop mode, press DVD DISPLAY.
The Control Menu appears.
continued
57GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing the disc for which Custom
Parental Control is set
5 Enter or re-enter your 4-digit password
by using the number buttons, then
press ENTER.
“Custom parental control is set.” appears
and the screen returns to the Control
Menu display.
1 Insert the disc for which Custom
Parental Control is set.
The CUSTOM PARENTAL CONTROL
display appears.
If you make a mistake entering
your password
Press C before you press ENTER and
input the correct number.
CUSTOM PARENTAL CONTROL
Custom parental control is already
set. To play, enter your password
ENTER
and press
.
If you make a mistake
Press O RETURN, then start from Step 3
again.
2 Enter your 4-digit password using the
number buttons, then press ENTER.
The system is ready for playback.
To turn off the Control Menu
Press DVD DISPLAY repeatedly until the
Control Menu is turned off.
z If you forget your password, enter the 6-digit
number “199703” using the number buttons when the
CUSTOM PARENTAL CONTROL display asks you
for your password, then press ENTER. The display
will ask you to enter a new 4-digit password.
To turn off the Custom Parental
Control function
1 In Step 4, select “OFF t,” then press
ENTER.
Limiting playback for children
(Parental Control)
2 Enter your 4-digit password using the
number buttons, then press ENTER.
Playback of some DVDs can be limited
according to a predetermined level such as
the age of the users. The “Parental Control”
function allows you to set a playback
limitation level.
To change the password
1 In Step 4, press X/x to select
“PASSWORD t,” then press ENTER.
The display for entering the password
appears.
A scene that is limited is not played, or it is
replaced by a different scene.
2 Enter your 4-digit password using the
number buttons, then press ENTER.
1
4
7
2
5
3
6
9
Number
buttons
3 Enter a new 4-digit password using the
8
>
10
10/0
number buttons, then press ENTER.
4 To confirm your password, re-enter it
using the number buttons, then press
ENTER.
H
X/x
O RETURN
ENTER
DVD
SETUP
58GB
Download from Www.Somanuals.com. All Manuals Search And Download.
1 In stop mode, press DVD SETUP.
4 Enter or re-enter your password using
the number buttons, then press ENTER.
The display for setting the playback
limitation level and changing the
password appears.
The Setup Display appears.
2 Press X/x to select “CUSTOM SETUP,”
then press ENTER.
“CUSTOM SETUP” is displayed.
CUSTOM SETUP
PARENTAL CONTROL
LEVEL:
STANDARD:
CUSTOM SETUP
PARENTAL CONTROL
TRACK SELECTION
OFF
USA
OFF
CHANGE PASSWORD
5 Press X/x to select “STANDARD,” then
press ENTER.
3 Press X/x to select “PARENTAL
CONTROL t,” then press ENTER.
The selection items for “STANDARD”
xIf you have not entered a
are displayed.
password
The display for registering a new
password appears.
CUSTOM SETUP
PARENTAL CONTROL
LEVEL:
OFF
USA
OTHERS
STANDARD:
CHANGE PASSWORD
CUSTOM SETUP
PARENTAL CONTROL
Enter a new 4-digit password,
ENTER
then press
.
6 Press X/x to select a geographic area
as the playback limitation level, then
press ENTER.
Enter a 4-digit password using the
number buttons, then press ENTER.
The display for confirming the password
appears.
The area is selected.
If you select “OTHERS t,” select and
enter the standard code in the table on
page 61 using the number buttons.
xWhen you have already
registered a password
The display for entering the password
appears.
CUSTOM SETUP
PARENTAL CONTROL
ENTER
Enter password, then press
.
continued59GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing the disc for which Parental
Control is set
7 Press X/x to select “LEVEL,” then
press ENTER.
The selection items for “LEVEL” are
displayed.
1 Insert the disc and press H.
The PARENTAL CONTROL display
appears.
CUSTOM SETUP
PARENTAL CONTROL
LEVEL:
STANDARD:
OFF
8:
CHANGE PASSWORD 7:
NC17
R
2 Enter your 4-digit password using the
number buttons, then press ENTER.
The system starts playback.
6:
5:
4:
3:
2:
1:
PG13
PG
G
z If you forget your password, remove the disc and
repeat Step 1 to 5 of “Limiting playback for
children.” When you are asked to enter your
password, enter “199703” using the number buttons,
then press ENTER. The display will ask you to enter
a new 4-digit password. After you enter a new 4-digit
password in Step 3, replace the disc in the system and
press H. When the PARENTAL CONTROL display
appears, enter your new password.
8 Select the level you want using X/x,
then press ENTER.
Parental Control setting is complete.
CUSTOM SETUP
PARENTAL CONTROL
LEVEL:
STANDARD:
4:
PG13
USA
CHANGE PASSWORD
Notes
• When you play DVDs which do not have the
Parental Control function, playback cannot be
limited on this system.
• Depending on the DVD, you may be asked to
change the parental control level while playing the
disc. In this case, enter your password, then change
the level. If the Resume Play mode is cancelled, the
level returns to the original level.
The lower the value, the more strict the
limitation.
If you make a mistake
Press O RETURN to go back to the
previous screen.
To turn off the Setup Display
Press DVD SETUP repeatedly until the
Setup Display is turned off.
To turn off the Parental Control
function and play the DVD after
entering your password
Set “LEVEL” to “OFF” in Step 8.
To change the password
1 In Step 5, select “CHANGE
PASSWORD t” using x, then press
ENTER.
The display for entering the password
appears.
2 Follow Step 3 to enter a new password.
60GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Area Code
Standard
Code
Standard
Code
number
number
Argentina
Australia
Austria
Belgium
Brazil
2044
2047
2046
2057
2070
2079
2090
2092
2115
2165
2174
2109
2219
2248
2238
2254
2276
Korea
2304
2363
2362
2376
2390
2379
2427
2424
2436
2489
2501
2149
2499
2086
2543
2528
Malaysia
Mexico
Netherlands
New Zealand
Norway
Canada
Chile
Pakistan
Philippines
Portugal
Russia
China
Denmark
Finland
France
Singapore
Spain
Germany
Hong Kong
India
Sweden
Switzerland
Taiwan
Indonesia
Italy
Thailand
Japan
United Kingdom 2184
61GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Operations
TV
Controlling the TV with
the Supplied Remote
Manufacturer
SONY
Code number
001
DAEWOO
002, 004, 005, 006, 007,
015
By adjusting the remote signal, you can
control your TV with the supplied remote.
FISHER
008
GOLDSTAR
002, 003, 011, 012, 015,
034
Notes
GRUNDIG
HITACHI
017, 034
• If you enter a new code number, the code number
previously entered will be erased.
• When you replace the batteries of the remote, the
code number may be reset to the default (SONY)
setting. Reset the appropriate code number.
002, 013, 014, 015
021, 022
ITT/NOKIA
JVC
016
MAGNAVOX
MITSUBISHI/MGA
NEC
002, 003, 018
002, 003, 019
002, 003, 020
009, 024
Controlling TVs with the remote
PANASONIC
PHILIPS
TV ?/1
015, 018
PIONEER
009, 025, 026, 040
002, 010, 027, 028, 029
TV/VIDEO
RCA/PROSCAN
SAMSUNG
002, 003, 015, 031, 032,
033, 034
1
4
7
2
5
3
6
9
Number
buttons
8
SANYO
008, 044, 045, 046
035
>
10
10/0
ENTER
SHARP
VOL +/–
TELEFUNKEN
THOMSON
TOSHIBA
ZENITH
023, 036, 037, 038
030, 037, 039
035, 040, 041
042, 043
COMMAND
MODE
DVD TV
switch
./>
CATV
Manufacturer
SONY
Code number
101
HAMLIN/REGAL
JERROLD/GI
123, 124, 125, 126, 127
Press and hold TV [/1 while entering your
TV’s manufacturer’s code (see the table)
using the number buttons and press ENTER.
Then release TV [/1.
102, 103, 104, 105, 106,
107, 108, 109, 119, 131
OAK
128, 129, 130
120, 121, 122
115, 116
PANASONIC
PIONEER
SCIENTIFIC ATLANTA
TOCOM
110, 111, 112
117, 118, 131
113, 114
Code numbers of controllable TVs
If more than one code number is listed, try
entering them one at a time until you find
the one that works with your TV.
ZENITH
62GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling the TV
You can control your TV using the buttons
below.
Watching the Video or
other Unit
By pressing
TV [/1
You can
Turn the TV on or off.
You can use VCRs or other units connected
to the VIDEO 1 or VIDEO 2 jacks. Refer to
the operation manual supplied with the unit
for further information on the operation.
TV/VIDEO
Switch the TV’s input source
between the TV and other input
sources.
Switching between TV and DVD
Using the COMMAND MODE DVD TV
switch, you can switch the remote signal
between control of the TV and control of the
DVD unit. When you watch the DVD,
ensure that you have the COMMAND
MODE DVD TV switch set to DVD.
1
4
7
2
5
3
6
9
FUNCTION
8
>
10
10/0
The table below shows the buttons that are
affected by the COMMAND MODE DVD
TV switch.
Button DVD
TV
Press FUNCTION repeatedly until
VIDEO 1 or VIDEO 2 that you connected
the unit to appears on the front panel
display.
Each time you press FUNCTION, the mode
of the system changes in the following
sequence.
1~9,*
>10,
10/0
Standard number Selects the TV
button function
for DVD.
Channels.
ENTER
Standard enter
function for
DVD.
Confirms the
selected channel.
Occasionally you
may able to
select 12 channel
directly.
DVD t VIDEO 1 t VIDEO 2 t
TUNER t DVD...
.
>
Standard
TV CH –
preceding title,
chapter skip
function for
DVD.
Standard forward TV CH +
title, chapter
skip for DVD.
3
#
VOL +
VOL –
VOL +
VOL –
Note
Depending on the TV, you may not be able to control
your TV or to use some of the buttons above.
* For double digit number, press >10, then the
number. (For example, press >10, then 2 and 5 for
entering 25.)
63GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To listen to non-preset radio stations
Use manual or automatic tuning in Step 2.
For manual tuning, press TUNING + or – on
the remote repeatedly.
For automatic tuning, press and hold
TUNING + or – on the remote.
Listening to the Radio
Preset radio stations in the system’s memory
first (see “Presetting Radio Stations” on
page 30).
z If an FM program is noisy
Press STEREO/MONO on the remote so that
“MONO” appears on the front panel display. There
will be no stereo effect, but the reception will
improve. Press the button again to restore the stereo
effect.
1
STEREO/
MONO
1
4
7
2
5
3
6
9
FUNCTION
8
>
10
10/0
DISPLAY
VOL +/–
z To improve reception
Reorient the supplied antennas.
To check the frequency or sound field
Press DISPLAY repeatedly.
Each time you press DISPLAY, the front
panel display changes as follows:
TUNING
–/+
PRESET
–/+
index name of the station* t frequency t
sound field t index name of the station.
1
Press FUNCTION repeatedly until
TUNER appears on the front panel
display.
* This is displayed when you have entered a
name for preset stations (page 65).
The last received station is tuned in.
m
TUNED
ST
FM
MHz
2
3
Press PRESET + or PRESET –
repeatedly to select the preset
station you want.
Each time you press the button, the
system tunes in one preset station.
Adjust the volume by pressing
VOL +/–.
To turn off the radio
Press 1.
64GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Radio Data
System (RDS)
Naming Preset Stations
You can enter a name of up to 8 characters
for preset stations. These names (for
example, “XYZ”) appear in the system’s
front panel display when a station is
selected.
(Only for the European models)
What is the Radio Data System?
Note that no more than one name can be
entered for each preset station.
Radio Data System (RDS) is a broadcasting
service that allows radio stations to send
additional information along with the
regular program signal. This tuner offers
convenient RDS features such as station
name display. RDS is available only for FM
stations.*
NAME
1
4
7
2
5
3
6
9
FUNCTION
8
>
10
10/0
Note
RDS may not work properly if the station you are
tuned to is not transmitting the RDS signal properly,
or if the signal strength is weak.
C/X/x/c
* Not all FM stations provide RDS service, nor do
they provide the same type of services. If you are
not familiar with the RDS system, check with your
local radio stations for details on RDS services in
your area.
ENTER
Receiving RDS broadcasts
1
2
Press FUNCTION repeatedly until
TUNER appears on the front panel
display.
Simply select a station from the FM band.
When you tune in a station that provides
RDS services, the station name appears in
the display.
The last station you received is tuned
in.
Each time you press FUNCTION, the
mode of the system changes in the
following sequence:
DVD t VIDEO 1 t VIDEO 2 t
TUNER t DVD...
To check the RDS information
Each time you press DISPLAY, the display
changes as follows:
t
Station name*
Tune in the preset station you
want to create an index name for.
If you are not familiar with how to
tune in preset stations, see “Listening
to the Radio” on page 64.
r
Frequency
r
SOUND FIELD
* If the RDS broadcast is not received, the station
name may not appear in the display.
continued65GB
Download from Www.Somanuals.com. All Manuals Search And Download.
3
4
Press NAME.
Create an index name by using the
cursor buttons:
Press x/X to select a character, then
press c to move the cursor to the next
position.
If you make a mistake
Press C or c repeatedly until the
character to be changed flashes, then
press x/X to select the right character.
5
Press ENTER.
To assign index names to other
stations
Repeat Steps 2 to 5.
66GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Settings and Adjustments
2 Press X/x to select the setup item from
the displayed list: “LANGUAGE SETUP,”
“SCREEN SETUP,” “CUSTOM SETUP,”
“SPEAKER SETUP,” and “RESET”. Then
press ENTER or c.
Using the Setup Display
By using the Setup Display, you can make
various adjustments to items such as picture
and sound. You can also set a language for
the subtitles and the Setup Display, among
other things. For details on each Setup
Display item, see page 68-74. For an overall
list of Setup Display items, see page 85.
The selected Setup item appears.
Example: “SCREEN SETUP”
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
COMPONENT OUT:
16:9
ON
JACKET PICTURE
INTERLACE
How to use the Setup Display
>
10
10/0
3 Select an item using X/x, then press
ENTER or c.
X/x/c
The options for the selected item appear.
DVD
DISPLAY
DVD
Example: “TV TYPE”
ENTER
SETUP
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
COMPONENTOUT:
16:9
4:3 LETTER BOX
4:3 PAN SCAN
1 In stop mode, press DVD SETUP.
The Setup Display appears.
LANGUAGE SETUP
OSD :
DVD MENU :
AUDIO :
SUBTITLE :
Options
ENGLISH
ENGLISH
ENGLISH
ENGLISH
Main
item
continued67GB
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Select a setting using X/x, then press
ENTER.
Setting the Display or
Sound Track Language
(LANGUAGE SETUP)
The setting is selected and setup is
complete.
Example: “4:3 PAN SCAN”
Selected setting
“LANGUAGE SETUP” allows you to set
various languages for the on-screen display
or sound track.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
COMPONENTOUT:
4:3 PAN SCAN
ON
JACKET PICTURE
INTERLACE
Select “LANGUAGE SETUP” in the Setup
Display. For details on using the display, see
“Using the Setup Display” (page 67).
LANGUAGE SETUP
OSD :
DVD MENU :
AUDIO :
SUBTITLE :
ENGLISH
ENGLISH
ENGLISH
ENGLISH
To turn off the Setup Display
Press DVD SETUP or DVD DISPLAY
repeatedly until the Setup Display is turned
off.
z If you select “RESET” in Step 2, you can reset all
of the “SETUP” settings on page 85 (except for
PARENTAL CONTROL) to the default settings.
After you select “RESET” and press ENTER, select
“YES” to reset the settings (it takes a few seconds to
complete), or select “NO” and press ENTER to
return to the Control Menu. Do not press POWER or
1 when resetting the system.
xOSD (On-Screen Display)
Switches the display language on the screen.
Selects the language from the displayed list.
xDVD MENU (DVD only)
Selects the desired language for the DVD
menu.
xAUDIO (DVD only)
Switches the language of the sound track.
Selects the language from the displayed list.
xSUBTITLE (DVD only)
Switches the language of the subtitle.
Selects the language from the displayed list.
68GB
Download from Www.Somanuals.com. All Manuals Search And Download.
zIf you select “OTHERS t” in “DVD MENU,”
“SUBTITLE,” or “AUDIO,” select and enter the
language code from the list using the number buttons
(page 84).
After you have made a selection, the language code
(4 digits) is displayed the next time you select
“OTHERS t.”
Settings for the Display
(SCREEN SETUP)
Note
Choose settings according to the TV to be
connected.
If you select a language that is not recorded on the
DVD, one of the recorded languages will be
automatically selected (except for the “OSD”).
Select “SCREEN SETUP” in the Setup
Display. For details on using the display, see
“Using the Setup Display” (page 67).
The default settings are underlined.
SCREEN SETUP
TV TYPE:
SCREEN SAVER:
BACKGROUND:
COMPONENT OUT:
16:9
ON
JACKET PICTURE
INTERLACE
xTV TYPE (DVD only)
Selects the aspect ratio of the connected TV
(4:3 standard or wide).
The default settings vary, depending on the
country model.
Select this when you connect a
wide-screen TV or a TV with a
wide mode function.
16:9
Select this when you connect a
4:3 screen TV. Displays a wide
picture with bands on the upper
and lower portions of the screen.
4:3
LETTER
BOX
Select this when you connect a
4:3 screen TV. Automatically
displays the wide picture on the
entire screen and cuts off the
portions that do not fit.
4:3
PAN SCAN
continued69GB
Download from Www.Somanuals.com. All Manuals Search And Download.
16:9
xCOMPONENT OUT
This will change the type of signal output
from the COMPONENT VIDEO OUT jacks
on the system. See pages 80, 81 for more
information about the different types.
4:3 LETTER BOX
4:3 PAN SCAN
Select this when you are
connected to a standard
(interlace format) TV.
INTERLACE
Select this when you have a
TV that can accept
PROGRESSIVE
progressive signals.
Notes
Note
• Unless the COMPONENT VIDEO OUT/SCAN
SELECT switch on the back panel of the unit is set
to “SELECTABLE,” you cannot select the above
setting.
Depending on the DVD, “4:3 LETTER BOX” may
be selected automatically instead of “4:3 PAN
SCAN” or vice versa.
• When “PROGRESSIVE” is selected in “SCREEN
SETUP,” no signal is output from the MONITOR
OUT or S VIDEO OUT jacks.
• When “PROGRESSIVE” is selected in “SCREEN
SETUP” and the color system of the TV is PAL,
the signal is changed into the interlace format
signal automaticaly.
xSCREEN SAVER
Turns the screen saver on and off so that the
screen saver image appears when you leave
the system in pause or stop mode for
15 minutes, or when you playback a CD for
more than 15 minutes. The screen saver will
help prevent your display device from
becoming damaged (ghosting). Press H to
turn off the screen saver.
ON
Turns on the screen saver.
Turns off the screen saver.
OFF
xBACKGROUND
Selects the background color or picture on
the TV screen in stop mode or while playing
a CD.
JACKET
PICTURE
The jacket picture (still picture)
appears in the background, but
only when the jacket picture is
already recorded on the disc
(CD-EXTRA, etc.). If the disc
does not contain a jacket
picture, the “GRAPHICS”
picture appears.
GRAPHICS
A preset picture stored in the
system appears in the
background.
BLUE
The background color is blue.
The background color is black.
BLACK
70GB
Download from Www.Somanuals.com. All Manuals Search And Download.
xTRACK SELECTION (DVD only)
Gives the sound track having the highest
number of channels priority when you play
a DVD on which multiple audio formats
(PCM, MPEG audio, DTS, or Dolby Digital
format) are recorded.
Custom Settings (CUSTOM
SETUP)
Allows setting up Parental Control and other
settings.
OFF
No priority given.
Priority given.
AUTO
Select “CUSTOM SETUP” in the Setup
Display. For details on using the display, see
“Using the Setup Display” (page 67).
The default settings are underlined.
Notes
• When you set the item to “AUTO,” the language
may change. The “TRACK SELECTION” setting
has higher priority than the “AUDIO” settings in
“LANGUAGE SETUP” (page 68).
• If PCM, DTS, MPEG audio, and Dolby Digital
sound tracks have the same number of channels, the
system selects PCM, DTS, Dolby Digital, and
MPEG audio sound tracks in this order.
CUSTOM SETUP
VCD COLOR SYSTEM
PARENTAL CONTROL
TRACK SELECTION
OFF
• Depending on the DVD, the audio channel with
priority may be predetermined. In this case, you
cannot give priority to the DTS, Dolby Digital, or
MPEG audio format by selecting “AUTO.”
xVCD COLOR SYSTEM (Asian
models and Australian models only)
Select the color system when you play a
VIDEO CD.
AUTO
Outputs the video signal in the
system of the disc, either PAL or
NTSC. If your TV uses a DUAL
system, select AUTO.
PAL
Changes the video signal of an
NTSC disc and output in the
PAL system.
NTSC
Changes the video signal of a
PAL disc and outputs it in the
NTSC system.
Notes
• You cannot change the color system of the disc
itself.
• On Asian models or Australian models, you can
change the color system of this unit according to
the connected TV. See page 24.
x
PARENTAL CONTROL t (DVD only)
Sets a password and playback limitation
level for DVDs with playback limitation for
children. For details, see “Limiting playback
for children (Parental Control)” (page 58).
71GB
Download from Www.Somanuals.com. All Manuals Search And Download.
• REAR
— BEHIND (LOW), BEHIND (HIGH),
SIDE (LOW), SIDE (HIGH): Specify
the position and height to implement
the Digital Cinema Surround modes.
— NONE: Select this if no rear speaker is
used.
Settings for the Speakers
(SPEAKER SETUP)
To obtain the best possible surround sound,
set the size of the speakers you have
connected and their distance from your
listening position. Then use the test tone to
adjust the volume and the balance of the
speakers to the same level.
• SUBWOOFER
— YES
Notes
• When you select an item, the sound cuts off for a
moment.
• Depending on the settings of other speakers, the
subwoofer may output excessive sound.
Select “SPEAKER SETUP” in the setup
display. For details, see “Using the Setup
Display” (page 67).
The default settings are underlined.
Specifying the rear speaker position
and height
If you select anything other than “NONE” in
“REAR,” specify the position and height of
the rear speakers. The default setting is
underlined.
SPEAKER SETUP
SIZE:
DISTANCE:
LEVEL:
BALANCE:
TEST TONE:
BEHIND (LOW) Select this if the rear
speakers are located in
section B and D.
To return to the default setting
Select the item, then press CLEAR.
BEHIND (HIGH) Select this if the rear
speakers are located in
section B and C.
xSIZE
SIDE (LOW)
SIDE (HIGH)
Select this if the rear
speakers are located in
section A and D.
When you do not connect center or rear
speakers, or move the rear speakers, set the
parameters for CENTER and REAR. Since
the front speaker and subwoofer settings are
fixed, you cannot change them. The default
settings are underlined.
Select this if the rear
speakers are located in
section A and C.
These parameters are not available when “REAR” is
set to “NONE.”
• FRONT
— YES
• CENTER
— YES: Normally select this.
— NONE: Select this if no center speaker
is used.
72GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Position diagram
FRONT
Front speaker distance from the
5 m/17 ft listening position can be set in
0.2 meter (1.0 ft) increments from
1.0 to 15.0 meters (3.0 to 50.0 ft).
CENTER Center speaker distance can be
5 m/17 ft moved up to 1.6 meters (5.0 ft)
forward closer to the listening
position, in 0.2 meter (1.0 ft)
increments.
90
REAR
3.4 m/
12 ft
Rear speaker distance can be moved
up to 4.6 meters (15.0 ft) closer to
your listening position from the
front speaker position, in 0.2 meter
(1.0 ft) increments.
A
A
45
B
B
20
Height diagram
Notes
• In SPEAKER SETUP, the North American model’s
OSD displays both metric and imperial
measurements. The other model’s displays metric
measurements only. The manual shows both.
• When you set the distance, the sound cuts off for a
moment.
• If each of the front or rear speakers are not placed
at an equal distance from your listening position,
set the distance according to the closest speaker.
• Do not place the rear speakers farther away from
your listening position than the front speakers.
C
D
C
60
30
D
xLEVEL
You can vary the level of each speaker as
follows. Be sure to set “TEST TONE” to
“ON” for easy adjustment.
xDISTANCE
The default distance setting for the speakers
in relation to the listening position is shown
below.
The default settings are underlined.
Adjusts the level of the center
speaker (–6 dB to +6 dB, 1 dB
increments).
CENTER
0 dB
5m
(17ft)
Adjusts the level of the rear
speakers (–6 dB to +6 dB, 1
dB increments).
REAR 0 dB
5m
(17ft)
5m
(17ft)
Adjusts the level of the
subwoofer (– 6dB to +6 dB, 1
dB increments).
SUBWOOFER
0 dB
3.4m
(12ft)
3.4m
(12ft)
Be sure to change the value in the Setup
Display when you move the speakers. The
default settings are underlined.
continued73GB
Download from Www.Somanuals.com. All Manuals Search And Download.
xBALANCE
Adjusting the speaker volume and
level
You can vary the balance of the left and right
speakers as follows. Be sure to set “TEST
TONE” to “ON” for easy adjustment.
The default settings are underlined.
1 After you stop playback, select
“SPEAKER SETUP” after pressing DVD
SETUP in the Setup Display.
FRONT Adjust the balance between the
CENTER front left and right speakers (You
can adjust from center 6 steps left
or right).
2 Select “TEST TONE” and set “TEST
TONE” to “ON.”
REAR
Adjust the balance between the rear
You will hear the test tone from each
speaker in sequence.
CENTER left and right speakers (You can
adjust from center 6 steps left or
right).
3 From your listening position, select
“BALANCE” or “LEVEL” and adjust the
value of “BALANCE” and “LEVEL” using
X/x.
To adjust the volume of all the
speakers at one time
Use the VOLUME control on the system or
press VOL +/–.
The test tone is emitted from both left
and right speakers simultaneously.
xTEST TONE
The speakers will emit a test tone to adjust
“BALANCE” and “LEVEL.”
4 Select “TEST TONE” and set “TEST
TONE” to “OFF” to turn off the test
tone.
The test tone is not emitted from the
speakers.
OFF
ON
Note
The test tone is emitted from each
speaker in sequence while adjusting
balance or level.
When you adjust the speaker settings, the sound cuts
off for a moment.
When you select one of the
“SPEAKER SETUP” items, the test
tone is emitted from both left and
right speakers simultaneously.
74GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Picture noise appears.
, The disc is dirty or flawed.
Troubleshooting
, If the picture output from your system goes
through your VCR to get to your TV, the
copy-protection signal applied to some DVD
programs could affect picture quality. If you
still experience problems even when you
connect your system directly to your TV, try
connecting your system to your TV’s S video
input (page 23).
If you experience any of the following
difficulties while using the system, use this
troubleshooting guide to help remedy the
problem before requesting repairs. Should
any problem persist, consult your nearest
Sony dealer.
Power
Even though you set the aspect ratio
in “TV TYPE” of “SCREEN SETUP,”
The power is not turned on.
, Check that the AC power cord (mains lead) is
connected securely.
the picture does not fill the screen.
, The aspect ratio of the disc is fixed on your
DVD.
Picture
The picture is black and white.
, Depending on the TV, the picture on the
screen becomes black and white when you
play a disc recorded in the NTSC color
system.
There is no picture.
, The video connecting cords are not connected
securely.
, The video connecting cords are damaged.
, The system is not connected to the correct TV
input jack (page 24).
Sound
, The video input on the TV is not set so that
you can view pictures from the system.
, You have set “COMPONENT OUT” in
“SCREEN SETUP” to “PROGRESSIVE”
even though your TV cannot accept the signal
in progressive format. In this case, set the
COMPONENT VIDEO OUT/SCAN
SELECT switch on the back panel of the
player to INTERLACE. Then set “COMPO-
NENT OUT” to “INTERLACE” after you
can see the TV screen correctly, and reset the
COMPONENT VIDEO OUT/ SCAN
SELECT switch to SELECTABLE.
, Even if your TV is compatible with
progressive format (480p) signals, the image
may be affected when you set “COMPO-
NENT OUT” to “PROGRESSIVE.” In this
case, set “COMPONENT OUT” to “INTER-
LACE.”
There is no sound.
, The audio connecting cord is not connected
securely.
, The audio connecting cord is damaged.
Replace it with a new one.
, Press MUTING on the remote if “MUTING
ON” is displayed on the front panel display.
, The protective device on the system has been
activated because of a short circuit. Turn off
the system, eliminate the short-circuit
problem and turn on the power again.
, The system is in pause mode or in Slow-
motion Play mode. Press H to return to
normal play mode.
, Fast forward or fast reverse is performed.
Press H to return to normal play mode.
, Check the speaker settings (pages 25, 72).
, When “PROGRESSIVE” is selected in
“SCREEN SETUP,” no signal is output from
the MONITOR OUT or S VIDEO OUT
jacks.
continued75GB
Download from Www.Somanuals.com. All Manuals Search And Download.
The left and right sounds are
The surround effect is difficult to
hear when you are playing a Dolby
unbalanced or reversed.
, Check that the speakers and components are
connected correctly and securely.
Digital or MPEG audio sound track.
, Check the speaker connections and setting
(pages 25, 72).
, Adjust the balance parameter in the
BALANCE menu (pages 28, 74).
, Depending on the DVD, the output signal
may not be the entire 5.1 channels. It may be
monaural or stereo even if the sound track is
recorded in Dolby Digital or MPEG audio
format.
Severe hum or noise is heard.
, Check that the speakers and components are
connected securely.
, Check that the connecting cords are away
from a transformer or motor, and at least
3 meters (10 feet) away from a TV set or
fluorescent light.
The sound comes from the center
speaker only.
, Depending on the disc, the sound may come
from the center speaker only.
, Move your TV away from the audio
components.
, The plugs and jacks are dirty. Wipe them with
a cloth slightly moistened with alcohol.
, Clean the disc.
No sound is heard from the center
speaker.
, Check the speaker connections and settings.
, Make sure the sound field function is on
(page 51).
The sound loses stereo effect when
you play a VIDEO CD, or a CD.
, Set “AUDIO” to “STEREO” in the Control
Menu display (page 49).
, Select a sound field containing the word
“cinema” (page 51).
, Make sure you connect the system
appropriately.
No sound or only a very low-level
sound is heard from the rear
speakers.
The surround effect is difficult to
hear when you are playing a Dolby
, Check the speaker connections and settings.
, Make sure the sound field function is on
(page 51).
Digital sound track.
, Make sure the sound field function is on
(page 51).
, Select a sound field containing the word
“cinema” (page 51).
, Check the speaker connections and settings
(pages 25, 72).
, Depending on the DVD, the output signal
may not be the entire 5.1 channel but
monaural or stereo even if the sound track is
recorded in Dolby Digital format.
76GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation
The MP3 audio track cannot be
played.
Radio stations cannot be tuned in.
, Check that the antennas are connected
securely. Adjust the antennas and connect an
external antenna if necessary.
, The DATA CD is not recorded in the MP3
format that conforms to ISO9660 Level 1/
Level 2 or Joliet.
, The MP3 audio track does not have the
extension “.MP3.”
, The signal strength of the stations is too weak
(when tuning in with automatic tuning). Use
direct tuning.
, The data is not formatted in MP3 even though
it has the extension “.MP3.”
, No stations have been preset or the preset
stations have been cleared (when tuning by
scanning preset stations). Preset the stations
(page 30).
, The player cannot play audio tracks in
MP3PRO format.
The title of the MP3 audio album or
, Press DISPLAY so that the frequency appears
in the display.
track is not correctly displayed.
, The player can only display numbers and
alphabet. Other characters are displayed as
“ ”.
The remote does not function.
, There are obstacles between the remote and
the system.
The disc does not start playing from
, The distance between the remote and the
system is too far.
the beginning.
, The remote is not pointed at the remote
sensor on the system.
, Program Play, Shuffle Play, or Repeat Play
has been selected (pages 39, 41, 42).
Press CLEAR to cancel these functions
before playing a disc.
, The batteries in the remote are weak.
, Resume Play has been selected.
During stop, press x on the system or the
remote and then start playback (page 34).
, The title, DVD or PBC menu automatically
appears on the TV screen.
The disc does not play.
, There is no disc inside.
, The disc is turned over.
Insert the disc with the playback side facing
down on the disc tray.
, The disc is skewed.
, The system cannot play CD-ROMs, etc.
(page 8).
The system starts playing the disc
automatically.
, The DVD features an auto playback function.
, The region code on the DVD does not match
the system.
, Moisture has condensed inside the system.
Remove the disc and leave the system turned
on for about half an hour (page 4).
Playback stops automatically.
, Some discs may contain an auto pause signal.
While playing such a disc, the system stops
playback at the auto pause signal.
continued77GB
Download from Www.Somanuals.com. All Manuals Search And Download.
You cannot perform some functions
such as Stop, Search, Slow-motion
Play, Repeat Play, Shuffle Play, or
Nothing is displayed on the front
panel display.
, Change the DIMMER setting (page 29).
Program Play.
, Depending on the disc, you may not be able
to do some of the operations above. See the
operating manual that comes with the disc.
A 5-character service number is
displayed on the screen and on the
front panel display.
, The self-diagnosis function was activated.
(See the table on page 79.)
Messages do not appear on the
screen in the language you want.
, In the Setup Display, select the desired
language for the on-screen display in “OSD”
under “LANGUAGE SETUP” (page 68).
A disc cannot be ejected and
“LOCKED” appears on the front panel
display.
, Contact your Sony dealer or local authorized
Sony service facility.
The language for the sound track
cannot be changed.
, Multilingual tracks are not recorded on the
DVD being played.
“PROTECT” appears on the front
panel display.
, The speaker protection circuit is in function.
Check the speaker connections.
, The DVD prohibits changing the language for
the sound track.
The subtitle language cannot be
changed.
, Multilingual subtitles are not recorded on the
DVD being played.
, The DVD prohibits changing the subtitles.
The subtitle cannot be turned off.
, The DVD prohibits turning off subtitles.
The angles cannot be changed.
, Multi-angles are not recorded on the DVD
being played. The angle can be changed only
when the “ANGLE” indicator lights up on the
front panel display.
, The DVD prohibits changing the angles.
The system does not operate
properly.
, If static electricity, etc., causes the system to
operate abnormally, press POWER on the
system to turn the system off and then on
again.
78GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Self-diagnosis Function
(When letters/numbers appear in the
display)
Glossary
Album
Section of a music piece on a data CD
containing MP3 audio tracks.
When the self-diagnosis function is
activated to prevent the system from
malfunctioning. In this case a five-character
service number (e.g., C 13 00) with a
combination of a letter and digits appears on
the screen and the front panel display. Refer
to the following table.
Chapter
Sections of a picture or a music piece on a
DVD that are smaller than titles. A title is
composed of several chapters.
Digital Cinema Sound (DCS)
This is the generic name of the surround
sound produced by digital signal processing
technology developed by Sony. Unlike
previous surround sound fields mainly
directed at the reproduction of music,
Digital Cinema Sound is designed
C:13:00
specifically for the enjoyment of movies.
First three
characters of
the service
number
Cause and/or Corrective
Action
Dolby Digital
This sound format for movie theaters is
more advanced than Dolby Pro Logic
Surround. In this format, the rear speakers
output stereo sound with an expanded
frequency range and a subwoofer channel
for deep bass is independently provided.
This format is also called “5.1” because the
subwoofer channel is counted as 0.1 channel
(since it functions only when a deep bass
effect is needed). All six channels in this
format are recorded separately to realize
superior channel separation. Furthermore,
since all the signals are processed digitally,
less signal degradation occurs.
C 13
The disc is dirty.
, Clean the disc with a soft
cloth (page 9).
C 31
The disc is not inserted
correctly.
, Re-insert the disc
correctly.
E XX
(xx is a number)
To prevent a malfunction, the
system has performed the self-
diagnosis function.
, Contact your nearest Sony
dealer or local authorized
Sony service facility and
give the 5-character
service number.
Example: E 61 10
Dolby Pro Logic Surround
As one method of decoding Dolby
Surround, Dolby Pro Logic Surround
produces four channels from two-channel
sound. Compared with the former Dolby
Surround system, Dolby Pro Logic Surround
reproduces left-to-right panning more
naturally and localizes sounds more
precisely.
continued79GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To take full advantage of Dolby Pro Logic
Surround, you should have one pair of rear
speakers and a center speaker. The rear
speakers output monaural sound.
The picture data uses the MPEG 2 format,
one of the worldwide standards of digital
compression technology. The picture data is
compressed to about 1/40 of its original size.
The DVD also uses the variable rate coding
technology that changes the data to be
allocated according to the status of the
picture.
The audio data is recorded in Dolby Digital
as well as in PCM, allowing you to enjoy
more real audio presence.
Furthermore, various advanced functions
such as the multi-angle, multilingual, and
Parental Control functions are provided with
the DVD.
Dolby Pro Logic II
Dolby Pro Logic II creates five full-
bandwidth output channels from two-
channel sources. This is done using an
advanced, high-purity matrix surround
decoder that extracts the spatial properties of
the original recording without adding any
new sounds or tonal colorations.
Movie mode
The Movie mode is for use with stereo
television shows and all programs encoded
in Dolby Surround. The result is enhanced
soundfield directionality that approaches the
quality of discrete 5.1-channel sound.
Film based software, Video based
software
DVDs can be classified as Film based or
Video based software. Film based DVDs
contain the same images (24 frames per
second) that are shown at movie theaters.
Video based DVDs, such as television
dramas or sit-coms, displays images at 30
frames (or 60 fields) per second.
Music mode
The Music mode is for use with any stereo
music recordings, and provides a wide and
deep sound space.
DTS
Digital audio compression technology that
the Digital Theater Systems, Inc. developed.
This technology conforms to 5.1-channel
surround. The rear channel is stereo and
there is discrete subwoofer channel in this
format. DTS provides the same 5.1 discrete
channels of high quality digital audio. The
good channel separation is realized because
the all channel data is recorded discrete and
processed in digital.
Interlace format
Interlace format shows every other line of an
image as a single “field” and is the standard
method for displaying images on television.
The even number field shows the even
numbered lines of an image, and the odd
numbered field shows the odd numbered
lines of an image.
Multi-angle function
Various angles, or viewpoints of the video
camera, for a scene are recorded on some
DVDs.
DVD
A disc that contains up to 8 hours of moving
pictures even though its diameter is the same
as a CD.
Multilingual function
The data capacity of a single-layer and
single-sided DVD, at 4.7 GB (Giga Byte), is
7 times that of a CD. Furthermore, the data
capacity of a dual-layer and single-sided
DVD is 8.5 GB, a single-layer and double-
sided DVD 9.4 GB, and a dual-layer and
double-sided DVD 17 GB.
Several languages for the sound or subtitles
in a picture are recorded on some DVDs.
Parental Control
A function of the DVD to limit playback of
the disc by the age of the users according to
the limitation level in each country.
80GB
Download from Www.Somanuals.com. All Manuals Search And Download.
The limitation varies from disc to disc; when
it is activated, playback is completely
prohibited, violent scenes are skipped or
replaced with other scenes and so on.
Title
The longest sections of a picture or music
feature on a DVD, movie, etc., in video
software, or the entire album in audio
software.
Playback Control (PBC)
Signals encoded on VIDEO CDs (Version
2.0) to control playback.
By using menu screens recorded on VIDEO
CDs with PBC functions, you can enjoy
playing simple interactive programs,
programs with search functions, and so on.
Track
Sections of a picture or a music piece on a
Super Audio CD, CD, VIDEO CD or MP3.
An album is composed of several tracks
(MP3 only).
VIDEO CD
Progressive format
A compact disc that contains moving
pictures.
Compared to the Interlace format that
alternately shows every other line of an
image (field) to create one frame, the
Progressive format shows the entire image at
once as a single frame. This means that
while the Interlace format can show 30
frames (60 fields) in one second, the
Progressive format can show 60 frames in
one second. The overall picture quality
increases and still images, text, and
horizontal lines appear sharper. This player
is compatible with the 480 progressive
format.
The picture data uses the MPEG 1 format,
one of the worldwide standards of digital
compression technology. The picture data is
compressed to about 1/140 of its original
size. Consequently, a 12 cm VIDEO CD can
contain up to 74 minutes of moving pictures.
VIDEO CDs also contain compact audio
data. Sounds outside the range of human
hearing are compressed while the sounds we
can hear are not compressed. VIDEO CDs
can hold 6 times the audio information of
conventional audio CDs.
There are 2 versions of VIDEO CDs.
• Version 1.1: You can play only moving
pictures and sounds.
• Version 2.0: You can play high-resolution
still pictures and enjoy PBC functions.
This system conforms to both versions.
Region Code
This system is used to protect copyrights. A
region number is allocated on each DVD
system or DVD disc according to the sales
region. Each region code is shown on the
system as well as on the disc packaging. The
system can play the discs that match its
region code. The system can also play discs
Super Audio CD
ALL
This audio format is based upon the current
audio CD standards but includes a greater
amount of information which provides
higher quality sound. There are three types
of discs: single layer, double layer and
hybrid discs. The hybrid disc contains both
standard audio CD and Super Audio CD
information.
with the “ ” mark. Even when the region
code is not shown on the DVD, the region
limit may still be activated.
Scene
On a VIDEO CD with PBC (playback
control) functions, the menu screens,
moving pictures and still pictures are
divided into sections called “scenes.”
81GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
AUDIO POWER SPECIFICATIONS
POWER OUTPUT AND TOTAL HARMONIC DISTORTION:
With 3 ohm loads, both channels driven, from 150 – 10,000 Hz; rated
70 watts per channel minimum RMS power, with no more than 1 %
total harmonic distortion from 250 milliwatts to rated output.
Amplifier section
Stereo mode
Surround mode
90 W + 90 W (3 ohms at 1 kHz, THD 10 %)
Front: 90 W + 90 W
Center*: 90 W
Rear*: 90 W + 90 W (3 ohms at 1 kHz, THD 10 %)
Subwoofer*: 100 W (3 ohms at 100 Hz, THD 10 %)
* Depending on the sound field settings and the source, there may be no sound output.
Inputs (Analog)
VIDEO 1, 2:
Sensitivity: 150 mV
Impedance: 50 kilohms
VIDEO 2 (optical):
Inputs (Digital)
Sensitivity: –
Outputs (Analog)
VIDEO 1 (AUDIO OUT):
Voltage: 2 V
Impedance: 1 kilohms
PHONES:
Accepts low- and high-impedance headphones
Super Audio CD/DVD system
Laser
Semiconductor laser
(Super Audio CD/DVD: λ = 650 nm)
(CD: λ = 780 nm)
Emission duration: continuous
NTSC or NTSC/PAL
Signal format system
Frequency response (at 2 CH STEREO mode)
DVD (PCM): 2 Hz to 22 kHz (±1.0 dB)
CD: 2 Hz to 20 kHz (±1.0 dB)
Signal-to-noise ratio
Harmonic distortion
More than 80 dB (VIDEO 1 (AUDIO) connectors only)
Less than 0.03 %
FM tuner section
System
PLL quartz-locked digital synthesizer system
Tuning range
North American model:
Other models:
Antenna
87.5 – 108.0 MHz (100 kHz step)
87.5 – 108.0 MHz (50 kHz step)
FM wire antenna
Antenna terminals
Intermediate frequency
75 ohms, unbalanced
10.7 MHz
82GB
Download from Www.Somanuals.com. All Manuals Search And Download.
AM tuner section
System
PLL quartz-locked digital synthesizer system
Tuning range
North American model:
530 – 1,710 kHz (with the interval set at 10 kHz)
531 – 1,710 kHz (with the interval set at 9 kHz)
531 – 1,602 kHz (with the interval set at 9 kHz)
531 – 1,602 kHz (with the interval set at 9 kHz)
530 – 1,710 kHz (with the interval set at 10 kHz)
Loop antenna
European model:
Other models:
Antenna
Intermediate frequency
450 kHz
Video section
Inputs
Outputs
Video: 1 Vp-p 75 ohms
Video: 1 Vp-p 75 ohms
S video:
Y: 1 Vp-p 75 ohms
C: 0.286 Vp-p 75 ohms
COMPONENT:
Y: 1 Vp-p 75 ohms
PB/CB, PR/CR: 0.7 Vp-p 75 ohms
Speakers
Front/Center/Rear
Speaker system
Speaker unit
Bass reflex
77 mm (3 1/8 inches) dia. cone type, 15 mm (5/8 inches) dia. balance
dome
Rated impedance
Dimensions (approx.)
Mass (approx.)
3 ohms
97 × 97 × 112 mm (3 7/8 × 3 7/8 × 4 1/2 inches) (w/h/d)
0.795 kg (1 lb 13 oz)
Subwoofer
Speaker system
Speaker unit
Rated impedance
Dimensions (approx.)
Mass (approx.)
Closed type
160 mm (6 3/8 inches) dia. cone type
3 ohms
217 × 302 × 217 mm (8 5/8 × 12 × 8 5/8 inches) (w/h/d)
4.6 kg (10 lb 3 oz)
General
Power requirements
North American model:
European model:
Australian model:
Power consumption
120 V AC, 60 Hz
230 V AC, 50/60 Hz
220 – 240 V AC, 50/60 Hz
135 W (120 V AC) 135 W (230 V AC)
1 W (120 V AC) 2 W (230 V AC) (at the Power Saving Mode)
Dimensions (approx.)
355 × 70 × 335 mm (14 × 2 7/8 × 13 1/4 inches) (w/h/d) incl. projecting
parts
Mass (approx.)
4.4 kg (9 lb 12 oz)
5˚C to 35˚C (41˚F to 95˚F)
5 % to 90 %
Operating temperature
Operating humidity
Supplied accessories
See page 17.
Design and specifications are subject to change without notice.
83GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Language Code List
For details, see pages 49, 56, 69.
The language spellings conform to the ISO 639: 1988 (E/F) standard.
Code Language
Code Language
Code Language
Code Language
1027 Afar
1183 Irish
1347 Maori
1507 Samoan
1508 Shona
1509 Somali
1511 Albanian
1512 Serbian
1513 Siswati
1514 Sesotho
1515 Sundanese
1516 Swedish
1517 Swahili
1521 Tamil
1028 Abkhazian
1032 Afrikaans
1039 Amharic
1044 Arabic
1045 Assamese
1051 Aymara
1052 Azerbaijani
1053 Bashkir
1057 Byelorussian
1059 Bulgarian
1060 Bihari
1061 Bislama
1066 Bengali;
Bangla
1067 Tibetan
1070 Breton
1079 Catalan
1093 Corsican
1097 Czech
1103 Welsh
1105 Danish
1109 German
1130 Bhutani
1142 Greek
1144 English
1145 Esperanto
1149 Spanish
1150 Estonian
1151 Basque
1157 Persian
1165 Finnish
1166 Fiji
1186 Scots Gaelic
1194 Galician
1196 Guarani
1203 Gujarati
1209 Hausa
1349 Macedonian
1350 Malayalam
1352 Mongolian
1353 Moldavian
1356 Marathi
1357 Malay
1358 Maltese
1363 Burmese
1365 Nauru
1217 Hindi
1226 Croatian
1229 Hungarian
1233 Armenian
1235 Interlingua
1239 Interlingue
1245 Inupiak
1248 Indonesian
1253 Icelandic
1254 Italian
1257 Hebrew
1261 Japanese
1269 Yiddish
1283 Javanese
1287 Georgian
1297 Kazakh
1298 Greenlandic
1299 Cambodian
1300 Kannada
1301 Korean
1305 Kashmiri
1307 Kurdish
1311 Kirghiz
1313 Latin
1326 Lingala
1327 Laothian
1332 Lithuanian
1334 Latvian; Lettish
1345 Malagasy
1369 Nepali
1376 Dutch
1525 Telugu
1527 Tajik
1528 Thai
1379 Norwegian
1393 Occitan
1403 (Afan)Oromo
1408 Oriya
1417 Punjabi
1428 Polish
1435 Pashto; Pushto
1436 Portuguese
1463 Quechua
1481 Rhaeto-
Romance
1529 Tigrinya
1531 Turkmen
1532 Tagalog
1534 Setswana
1535 Tonga
1538 Turkish
1539 Tsonga
1540 Tatar
1543 Twi
1557 Ukrainian
1564 Urdu
1482 Kirundi
1483 Romanian
1489 Russian
1491 Kinyarwanda
1495 Sanskrit
1498 Sindhi
1501 Sangho
1502 Serbo-Croatian
1503 Singhalese
1505 Slovak
1572 Uzbek
1581 Vietnamese
1587 Volapük
1613 Wolof
1632 Xhosa
1665 Yoruba
1684 Chinese
1697 Zulu
1171 Faroese
1174 French
1181 Frisian
1506 Slovenian
1703 Not specified
84GB
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Setup Menu List
You can set the following items with the DVD setup menu.
The order of the displayed items may be different from the actual display.
SCREEN SETUP
LANGUAGE SETUP
TV TYPE
16:9
OSD
(Select the language you
4:3 LETTER
BOX
want to use from the
displayed language list.)
4:3 PAN SCAN
ON
OFF
JACKET
PICTURE
GRAPHICS
BLUE
SCREEN SAVER
BACKGROUND
DVD MENU (Select the language you
want to use from the
displayed language list.)
AUDIO
(Select the language you
want to use from the
BLACK
displayed language list.)
COMPONENT OUT
INTERLACE
PROGRESSIVE
SUBTITLE
(Select the language you
want to use from the
SPEAKER SETUP
displayed language list.)
SIZE
FRONT
CENTER
YES
YES
NONE
BEHIND LOW
HIGH
CUSTOM SETUP
VCD COLOR
SYSTEM*
AUTO
PAL
NTSC
OFF
8.
7. NC17
6.
5.
REAR
SIDE
LOW
HIGH
PARENTAL LEVEL
CONTROL
NONE
SUBWOOFER YES
R
DISTANCE** FRONT
1.0m ~15m/
3ft ~ 50ft
0m ~15m/
0ft ~ 50ft
0m ~15m/
0ft ~ 50ft
4. PG13
CENTER
3.
PG
2.
1.
REAR
G
STANDARD USA
LEVEL
CENTER
REAR
–6 dB ~ +6 dB
–6 dB ~ +6 dB
SUBWOOFER –6 dB ~ +6 dB
OTHERSt
CHANGE PASSWORD
OFF
TRACK
BALANCE
FRONT
REAR
OFF
6 steps left or right
6 steps left or right
SELECTION AUTO
TEST
TONE
ON
RESET
YES
*
Only for Asian models and Australian models.
** In SPEAKER SETUP, the North American
model's OSD displays both metric and imperial
measurements. The other model's displays metric
measurements only. The manual shows both.
85GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Numerics
16:9 69
4:3 LETTER BOX 69
4:3 PAN SCAN 69
I
S
INDEX 45
Index 7
S VIDEO 23
Scan 43
SCENE 15
Scene 7, 81
L
SCREEN SAVER 70
SCREEN SETUP 69
SHUFFLE 41
Shuffle Play 41
SIZE 72
A
LANGUAGE SETUP 68
LEVEL 29, 73
Locating
Album 7, 79
ALBUM 37, 44
AMP MENU 26
ANGLE 55
Antenna Hookups 21
AUDIO 49, 68
a specific point by watching
the TV screen 43
Slow-motion Play 43
Sound Field 51
SPEAKER SETUP 72
Speaker System Hookup 18
SUBTITLE 56, 68
Super Audio CD 81
M
MEMORY 30
MP3 36
B
BACKGROUND 70
BALANCE 28, 74
BAND 30
Multi-angle function 55
Multilingual function 49
MUTING 33
T
Batteries 18
TEST TONE 74
TIME 45, 46
N
C
NAME 65
TIME SEARCH 45
TITLE 44
Title 7, 81
TRACK 44
Track 7, 81
TRACK SELECTION 71
Troubleshooting 75
TV and Video Component
Hookups 23
CHAPTER 45
Chapter 7, 79
COMPONENT OUT 70
Continuous play
CD/VIDEO CD/Super Audio
CD/ DVD/MP3 32
Control Menu 15
CUSTOM PARENTAL
CONTROL 57
O
On-screen display
Control Menu display 15
Setup Display 67
OSD 68
P
TV TYPE 69
PARENTAL CONTROL 58, 71,
80
CUSTOM SETUP 71
PBC Playback 35, 81
PLAY MODE 38
Preset Station 30, 64
Program Play 39
U
D
Usable discs 7
DIMMER 29
DISC SKIP 32
V
DISTANCE 27, 73
Dolby Digital 79
Dolby Pro Logic Surround 79
DTS 80
VCD COLOR SYSTEM 71
VIDEO CD 35, 81
Q
Quick Overview 17
DVD 35, 80
DVD MENU 35, 68
R
Radio 64
RDS 65
F
Rear Panel 13
Region code 8, 81
Remote 14, 62
REPEAT 42
RESET 68
Fast forward 43
Fast reverse 43
Front Panel 11
Front panel display 12
Resume Play 34
H
Handling discs 9
86GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
qd H PLAY/SELECT
Plays a disc.
qf DVD TOP MENU
Displays the title menu on the TV screen.
qg DVD DISPLAY
Quick reference for Remote
Commander
Displays the Control Menu display on the TV
screen to set or adjust the items.
qh C/X/x/c/ENTER
Selects and executes the items or settings.
qj DVD SETUP
Displays the setup display on the TV screen to set
or adjust the items.
qk 1 (standby)
1
4
7
2
5
3
6
9
8
>
10
10/0
Turns on and off the power of the system.
ql DISC SKIP
Selects a disc for playback.
w; TV/VIDEO
Changes the input mode of the TV.
wa REPEAT
Displays the “REPEAT” display on the TV screen.
ws MUTING
Mutes the sound.
wd TIME
zShaded parts buttons are affected by the COMMAND
MODE DVD TV switch. Shaded descriptions refer to TV
setting on the switch.
Displays the playing time of the disc, etc., on the
front panel display.
wf FUNCTION
Selects the component you want to use.
wg BAND
Selects AM or FM band.
wh Number buttons*
Selects the items of settings.
TV : Selects channel numbers.
wj SOUND FIELD
Selects the sound field.
wk DISPLAY
Switches the item displayed on the front panel
display.
wl ENTER
Executes the items or settings. TV : Press after
selecting a channel number
e; COMMAND MODE DVD TV switch
Switches the TV’s input source between the TV
and DVD.
Note
• The remote control of the unit employs command signals in
common with other Sony DVD products.
Thus, depending on the button, other Sony DVD products
may respond.
1
2
3
4
TV [/1 (on/standby)
Turns the TV on and off.
Z (EJECT)
Ejects the disc.
NAME
Activates the name function.
STEREO/MONO
Switches monaural or stereo of FM stereo
reception.
5
6
7
8
MEMORY
Press to store a preset station.
CLEAR
Press to return to the Continuous play, etc.
PLAY MODE
Selects program or shuffle play mode.
AUDIO
ea m/M,
/
SLOW, TUNING –/+
m/M (SCAN) : Locate a point while
monitoring the picture while playing disc.
/
SLOW : Play a disc in slow motion in the
pause mode.
TUNING –/+ : Scan all available radio stations.
Changes the sound while playing a DVD or
VIDEO CD.
es x STOP
Stops playing a disc.
ed X PAUSE
Pauses playing a disc.
ef DVD MENU
Displays the DVD menu on the TV screen.
eg O RETURN
Press to return to the previously selected screen, etc.
eh AMP MENU
9
ANGLE
Changes the angles when playing a DVD.
q; SUBTITLE
Displays the ”SUBTITLE“ menu in the Control
Menu display.
qa VOL +/–
Adjust the SYSTEM volume. TV : Adjust the TV
volume.
qs ./>, PREV/NEXT, TV CH –/+,
PRESET –/+
Displays the speaker set up parameters on the
front panel display.
./> PREV/NEXT : Press to go to the next
chapter or track or to go back to the previous
chapter or track.
PRESET –/+ : Scan all preset stations.
TV CH –/+ : Select the TV Channel
* Depending on the TV set, you can also enter the number as
follows:
Press >10, then the number. (For example, press >10, then
2 and 5 for entering 25.)
Sony Corporation Printed in Korea
Download from Www.Somanuals.com. All Manuals Search And Download.
|