3-083-945-14 (1) US
DVD Player/
Video Cassette
Recorder
Operating Instructions
For customers in the USA
If you have any questions about your Sony DVD-VCR, you may call Sony Customer
Information Services Company at 1-800-VHS-SONY (847-7669).
For all other Sony product questions, please call Sony Customer Information Services
Company at 1-800-222-SONY (7669).
Or write to: Sony Customer Information Services Company 12451 Gateway
Boulevard Ft. Myers, FL 33913
For Customers in Canada
If this product is not working properly, please call 1-877-602-2008 for Peace of Mind
Warranty Replacement service.
For other product related questions please contact our Customer Information Service
Center at 1-877-899-7669 or write to us at: Customer Information Service 115 Gordon
Baker Road, Toronto, Ontario, M2H 3R6
SLV-D300P
© 2003 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
WARNING
Welcome!
To prevent fire or shock
hazard, do not expose the
unit to rain or moisture.
To avoid electrical shock, do
not open the cabinet. Refer
servicing to qualified
Thank you for purchasing this
Sony DVD Player/Video Cassette
Recorder. Before operating this
player, please read this manual
thoroughly and retain it for future
reference.
For customers in the
U.S.A
Owner’s Record
The model and serial numbers are
located at the rear of the unit.
Record the serial number in the
space provided below. Refer to
them whenever you call upon your
Sony dealer regarding this product.
personnel only.
To prevent fire or shock
hazard, do not place objects
filled with liquids, such as
vases, on the apparatus.
General
Precautions
Model No. SLV-D300P
Serial No.______________
CAUTION
CAUTION
The use of optical instruments with
this product will increase eye
hazard. As the laser beam used in
this DVD player is harmful to eyes,
do not attempt to disassemble the
cabinet.
•
Operate the unit only on
120 V AC, 60 Hz.
You are cautioned that any
changes or modifications not
expressly approved in this manual
could void your authority to
operate this equipment.
•
This unit is not
disconnected from the AC
power source (mains) as
long as it is connected to
the wall outlet, even if the
unit itself has been turned
off.
Refer servicing to qualified
personnel only.
Note
USE OF ANY CONTROLS,
ADJUSTMENTS, OR
PROCEDURES OTHER THAN
THOSE SPECIFIED HEREIN
MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
•
•
Unplug the unit from the
wall outlet if you do not
intend to use it for an
extended period of time.
To disconnect the cord, pull
it out by the plug, never by
the cord.
This equipment has been tested
and found to comply with the
limits for a Class B digital device,
pursuant to Part 15 of the FCC
Rules. These limits are designed to
provide reasonable protection
against harmful interference in a
residential installation. This
equipment generates, uses, and can
radiate radio frequency energy
and, if not installed and used in
accordance with the instructions,
may cause harmful interference to
radio communications. However,
there is no guarantee that
If the unit is brought
directly from a cold to a
warm location, moisture
may condense inside the
unit and cause damage to
the video head and tape.
When you first install the
unit, or when you move it
from a cold to a warm
location, wait for about
three hours before
interference will not occur in a
particular installation. If this
equipment does cause harmful
interference to radio or television
reception, which can be
This symbol is
intended to alert the
user to the presence
operating the unit.
•
•
Do not install the unit in a
confined space such as a
book or similar unit.
of uninsulated
determined by turning the
“dangerous voltage”
within the product’s enclosure that
may be of sufficient magnitude to
constitute a risk of electric shock to
persons.
equipment off and on, the user is
encouraged to try to correct the
interference by one or more of the
following measures:
– Reorient or relocate the
receiving antenna.
– Increase the separation
between the equipment and
receiver.
– Connect the equipment into an
outlet on a circuit different
from that to which the receiver
is connected.
– Consult the dealer or an
experienced radio/TV
technician for help.
Do not install the unit in an
inclined position. It is
designed to be operated in a
horizontal position only.
Keep the unit and cassettes
away from equipment with
strong magnets, such as
microwave ovens or large
loudspeakers.
This symbol is
intended to alert the
user to the presence
of important
•
•
operating and
maintenance (servicing)
instructions in the literature
accompanying the appliance.
Do not place heavy objects
on the unit.
CAUTION
TO PREVENT ELECTRIC
SHOCK, MATCH WIDE BLADE
OF PLUG TO WIDE SLOT,
FULLY INSERT.
2
WARNING
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of contents
WARNING
Welcome!
General Precautions
Important Safety Instructions
DVD Precautions
About this manual
This player can play the following discs
Notes about discs
8 Step 1 : Unpacking
9 Step 2 : Setting up the remote commander
12 Step 3 : Basic hookups
19 Step 4 : Selecting a language
20 Step 5 : Setting the clock
24 Step 6 : Presetting channels
54 Setting the display or sound track
language
28 Playing discs
31 Guide to the on-screen display
33 Playing a tape
56 Parental Control (limiting playback
by children)
36 Recording TV programs
39 Recording TV programs using the
59 Using the DVD’s menu
60 Zooming into a scene
61 Changing the angles
62 Displaying the subtitle
timer
42 Checking/changing/canceling timer
settings
(Program play, Shuffle play, Repeat
play)
44 A/V Receiver hookup
46 S-Video/Component Video hookup
67 Using bookmarks
69 Changing the sound
DVD Settings and
Adjustements
70 Virtual surround setting
72 Playing an MP3 audio track
76 Playing JPEG image files
48 Audio Setup
51 Screen Setup
79 Playing VIDEO CDs with “MENU
ON/OFF” Functions
4
Table of contents
Download from Www.Somanuals.com. All Manuals Search And Download.
Caution
81 Quick Timer Recording
For use of the VCR
Television programs, films, video tapes and
other materials may be copyrighted.
Unauthorized recording of such material may
be contrary to the provisions of the copyright
laws. Also, use of this recorder with cable
television transmission may require
authorization from the cable television
transmission and/or program owner.
82 Recording stereo and bilingual
programs
83 Searching using various functions
85 Adjusting the picture (tracking)
86 Changing menu options
87 Editing with another VCR
For use of the DVD player
This product incorporates copyright
protection technology that is protected by
method claims of certain U.S. patents, other
intellectual property rights owned by
Macrovision Corporation, and other rights
owners. Use of this copyright protection
technology must be authorized by
Macrovision Corporation, and is intended for
home and other limited viewing uses only
unless otherwise authorized by Macrovision
Corporation. Reverse engineering or
disassembly is prohibited.
89 General setup information
92 Troubleshooting
97 Glossary
99 Specifications
101 Index to parts and controls
106 DVD Audio/Subtitle Language
107 Index
Table of contents 5
Download from Www.Somanuals.com. All Manuals Search And Download.
Region code
About this manual
Your player has a region code printed on the back
of the unit and only will play DVD VIDEO discs
(playback only) labeled with identical region codes.
This system is used to protect copyrights.
•
The meaning of the icons used in this manual is
described below:
Icon
Meaning
ALL
DVDs labeled
will also play on this player.
Functions available for DVD
VIDEOs and DVD-RWs/
DVD-Rs in video mode or
DVD+RWs/DVD+Rs
If you try to play any other DVD, the message
“Playback prohibited by area limitations.” will
appear on the TV screen. Depending on the DVD,
no region code indication may be labeled even
though playing the DVD is prohibited by area
restrictions.
Functions available for VIDEO
CDs, Super VCDs or CD-Rs/
CD-RWs in video CD format
or Super VCD format
X
Region code
Functions available for DATA
CDs (CD-ROMs/CD-Rs/CD-
RWs containing MP3* audio
tracks or JPEG files)
SLV–DXXXX
00V 00Hz
NO.
00W
0-000-000-00
Functions available for music
CDs or CD-Rs/CD-RWs in
music CD format
Example of discs that the player
cannot play
Functions available for VHS
VIDEOs
The player cannot play the following discs:
• All CD-ROMs (including PHOTO CDs)/CD-
Rs/CD-RWs other than those recorded in the
following formats:
* MP3 (MPEG 1 Audio Layer 3) is a standard format
defined by ISO/MPEG which compresses audio data.
–music CD format
–video CD format
–MP3 or JPEG format that conforms to
ISO9660* Level 1/Level 2, or its extended
format, Joliet
• Data part of CD-Extras
• DVD-RWs in VR mode
This player can play the
following discs
• DVD-ROMs
• DVD Audio discs
Format of discs
• HD layer on Super Audio CDs
* A logical format of files and folders on CD-ROMs,
defined by ISO (International Standard
Organization).
DVD VIDEO
VIDEO CD
Also, the player cannot play the following
discs:
Music CD
• A DVD with a different region code.
• A disc recorded in a color system other than
NTSC, such as PAL or SECAM (this player
conforms to the NTSC color system).
• A disc that has a non-standard shape (e.g.,
card, heart).
The “DVD VIDEO” logo is a trademark.
• A disc with paper or stickers on it.
• A disc that has the adhesive of cellophane tape
or a sticker still left on it.
6
About this manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Some DVD-RWs/DVD-Rs, DVD+RWs/DVD+Rs or
CD-Rs/CD-RWs cannot be played on this player due to
the recording quality or physical condition of the disc,
or the characteristics of the recording device.
Furthermore, the disc will not play if it has not been
correctly finalized. For more information, see the
operating instructions for the recording device.
Note that discs created in the Packet Write format
cannot be played.
Notes about discs
• To keep the disc clean, handle the disc by its
edge. Do not touch the surface.
Note on playback operations of
DVDs and VIDEO CDs
• Do not expose the disc to direct sunlight or
heat sources such as hot air ducts, or leave it in
a car parked in direct sunlight as the
temperature may rise considerably inside the
car.
• After playing, store the disc in its case.
• Clean the disc with a cleaning cloth.
Wipe the disc from the center out.
Some playback operations of DVDs and VIDEO
CDs may be intentionally set by software
producers. Since this player plays DVDs and
VIDEO CDs according to the disc contents the
software producers designed, some playback
features may not be available. Also, refer to the
instructions supplied with the DVDs or VIDEO
CDs.
Music discs encoded with
copyright protection technologies
This product is designed to playback discs that
conform to the Compact Disc (CD) standard.
Recently, various music discs encoded with
copyright protection technologies are marketed
by some record companies. Please be aware that
among those discs, there are some that do not
conform to the CD standard and may not be
playable by this product.
Do not use solvents such as benzine, thinner,
commercially available cleaners, or anti-static
spray intended for vinyl LPs.
Notes about discs 7
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Step 1 : Unpacking
Check that you have received the following items with the DVD-VCR:
• Remote commander
• Size AA (R6) batteries
• 75-ohm coaxial cable with F-type connectors
• Audio/video cord
(pinplug ×3 y pinplug ×3)
Note
•
The supplied remote commander is for the exclusive use of this DVD-VCR.
8
Unpacking
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2 : Setting up the remote commander
Inserting the batteries
Insert two size AA (R6) batteries
by matching the + and – on the
batteries to the diagram inside the
battery compartment.
Insert the negative (–) end first,
then push in and down until the
positive (+) end clicks into
position.
Remote sensor
Using the remote
commander
You can use this remote
commander to operate this DVD-
VCR and a Sony TV. Buttons on
the remote commander marked
with an orange dot (•) can be used
to operate your Sony TV.
If the TV does not have the
symbol near the remote sensor, this
remote commander will not
TV /
DVD·VIDEO
SELECT VIDEO
SELECT DVD
operate the TV.
To operate
Set TV / DVD·VIDEO to
the DVD player DVD·VIDEO, then press SELECT DVD and point at the remote sensor at
the DVD-VCR
the VCR
DVD·VIDEO, then press SELECT VIDEO and point at the remote sensor
at the DVD-VCR
your TV
TV and point at the remote sensor at your TV
Notes
•
•
With normal use, the batteries should last about three to six months.
If you do not use the remote commander for an extended period of time, remove the batteries
to avoid possible damage from battery leakage.
•
•
•
•
•
Do not use a new battery with an old one.
Do not use different types of batteries.
Do not leave the remote commander in an extremely hot or humid place.
Do not drop any foreign object into the remote casing, particularly when replacing the batteries.
Do not expose the remote sensor to direct light from the sun or lighting apparatus. Doing so
may cause a malfunction.
continued
Setting up the remote commander 9
Download from Www.Somanuals.com. All Manuals Search And Download.
Controlling other TVs with the remote commander
The remote commander is preprogramed to control non-Sony TVs. If your TV is
listed in the following table, set the appropriate manufacturer’s code number.
Set TV / DVD·VIDEO at the top of the remote commander to TV.
1
Hold down ?/1, and enter your TV’s code number using the number buttons.
2 Then release ?/1.
Now you can use the ?/1, VOL +/–, CH +/–, MUTING*, TV/VIDEO and ENTER*
buttons to control your TV. You can also use the buttons marked with a dot (•) to
control a Sony TV. To control the DVD-VCR, reset TV / DVD·VIDEO to
DVD·VIDEO.
* for Sony TV only
Code numbers of controllable TVs
If more than one code number is listed, try entering them one at a time until you find
the one that works with your TV.
TV brand
Sony
Code number
TV brand
Panasonic
Philco
Code number
06, 19
03, 04
08
01
Akai
04
AOC
04
Philips
Pioneer
Portland
Quasar
Radio Shack
RCA
Centurion
Coronado
Curtis-Mathes
Daytron
Emerson
Fisher
12
16
03
03
12
06, 18
05, 14
04, 10
12
12
03, 04, 14
11
Sampo
Sanyo
General Electric
Gold Star
Hitachi
06, 10
03, 04, 17
02, 03
04, 12
09
11
Scott
12
Sears
07, 10, 11
03, 05, 18
08, 12
03, 08, 14
07
J.C.Penney
JVC
Sharp
Sylvania
Teknika
Toshiba
Wards
KMC
03
Magnavox
Marantz
MGA/Mitsubishi
NEC
03, 08, 12
04, 13
04, 12, 13, 17
04, 12
03, 04, 12
12
Yorx
Zenith
15
10 Setting up the remote commander
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
•
•
If you enter a new code number, the code number previously entered will be erased.
If the TV uses a different remote control system from the one programed to work with the
DVD-VCR, you cannot control your TV with the remote commander.
•
When you replace the batteries of the remote commander, the code number may change. Set
the appropriate code number every time you replace the batteries.
Setting up the remote commander 11
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3 : Basic hookups
Before you get started
• Be sure to disconnect the AC power cord of each component before connecting.
• Turn off the power to all equipment.
• Do not connect the AC power cords until all of the connections are completed. If
you connect the AC power cord before the connections are completed, you may not
be able to use the Plug and Play function.
• Be sure you make connections firmly. Loose connections may cause picture
distortion.
• If your TV does not match any of the examples provided, see your nearest Sony
dealer or qualified technician.
Selecting the best hookup option
There are many ways in which your DVD-VCR can be hooked up. To hook up your
DVD-VCR so that it works best for you, first scan through the table below. Then use
the accompanying diagrams and procedures on the following pages to set up your
DVD-VCR.
Then follow one of the hookups below. If your TV does not have A/V inputs, go
directly to one of the hookups below.
If you have
Use
Refer to
Antenna only, no cable TV
Hookup 1
(Plug and Play)
No cable box or cable box with only a
few scrambled channels
Hookup 2
(Plug and Play)
Page 18
Cable box with many scrambled
channels
Hookup 3
After you have completed the connections, follow the instructions for setup.
After you have completed the setup, you are ready to use your DVD-VCR.
Procedures differ depending on the hookup you used.
Caution
Connections between the DVD-VCR’s VHF/UHF connector and the antenna terminals of the
TV receiver should be made only as shown in the following instructions. Failure to do so may
result in operation that violates the regulations of the Federal Communications Commission
regarding the use and operation of RF devices. Never connect the output of the DVD-VCR to an
antenna or make simultaneous (parallel) antenna and DVD-VCR connections at the antenna
terminals of your receiver.
Note to CATV system installer (in USA)
This reminder is provided to call the CATV system installer’s attention to Article 820- 40 of the
NEC that provides guidelines for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the building, as close to the point of cable
entry as practical.
12 Basic hookups
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio/video (A/V) hookup
If your TV has audio/video (A/V) input jacks, you will get better picture and sound if
you hook up your DVD-VCR using these connections. If your TV does not have A/V
Hookups” (page 44) explains additional hookup methods that will optimize the
picture and sound for a true “hometheater” experience.
If you are not planning to use your DVD-VCR to record programs, you only need to
make the connections shown on this page. If you want to record regular or cable TV
programs, complete these connections first, and then go to the following pages for
antenna or cable hookups.
A Use this hookup if your TV has stereo jacks
Stereo receiver
DVD-VCR
TV
Audio/video cord (supplied)
Audio cord (not supplied)
B Use this hookup if your TV does not have stereo jacks
Stereo receiver
DVD-VCR
TV
Video cord (not supplied)
Audio cord (not supplied)
Notes
•
•
To play a tape/disc in stereo, you must use the A/V connection.
If you do not have a stereo receiver, connect the white LINE OUT/AUDIO L jack to the
AUDIO IN jack on your TV.
continued
Basic hookups 13
Download from Www.Somanuals.com. All Manuals Search And Download.
Hookup 1 (Plug and Play)
Antenna hookup
Make the following connections if you are using an antenna (if you do not have cable
TV).
A Use this hookup if you are using:
• VHF/UHF antenna (you get channels 2–13 and channels 14 and higher)
• UHF-only antenna (you get channels 14 and higher)
• Separate VHF and UHF antennas
Rear of TV
VHF/UHF
Match the type of
A
connector on your
TV: A, B, or C.
or
or
VHF
DVD-VCR
B
UHF
VHF
C
UHF
B Use this hookup if you are using a VHF-only antenna (you get
channels 2–13 only)
Rear of TV
VHF/UHF
Match the type of
A
connector on your
TV: A, B, or C.
or
or
VHF
DVD-VCR
For connector types
B and C, no UHF
connection is
required.
B
UHF
VHF
C
UHF
If you cannot connect your antenna cable to the DVD-VCR directly
If your antenna cable is a flat cable (300-ohm twin lead cable), attach an external
antenna connector (not supplied) so you can connect the cable to the RF IN
connector. If you have separate cables for VHF and UHF antennas, you should use a
14 Basic hookups
Download from Www.Somanuals.com. All Manuals Search And Download.
Hookup 1 : DVD-VCR setup
Plug the DVD-VCR into an AC outlet.
The DVD-VCR automatically presets the DVD-VCR’s clock and TV channels
when the DVD-VCR is plugged into the AC outlet.
AC power cord
to AC outlet
The DVD-VCR starts presetting the
clock and channels.
When Auto preset is completed, the
current time appears in the display
window.
You have now completed DVD-VCR setup.
To change the on-screen display language to French or Spanish, see
The clock is set using a time signal provided by some TV channels. If the clock
is incorrect, or “--:--” appears in the display window, see “Using Manual Clock
To add or disable channels manually, see “Presetting/disabling channels
Notes
•
If you connect the AC power cord before the antenna connections are completed, the channels
•
•
Do not press any buttons on the DVD-VCR or remote commander during Auto preset.
Auto preset starts automatically only when you plug in the AC power cord for the first time
after you purchase the DVD-VCR.
•
Auto preset can be performed by pressing x STOP on the unit continuously for 5 seconds or
more with the DVD-VCR power turned off.
continued
Basic hookups 15
Download from Www.Somanuals.com. All Manuals Search And Download.
Hookup 2 (Plug and Play)
You have no cable box, or a cable box with only a few
scrambled channels
Recommended use
Use this hookup if you do not have a cable box. Also use this hookup if your cable
system scrambles only a few channels.
What you can do with this hookup
• Record any unscrambled channel by selecting the channel on the VCR
What you cannot do
• Record scrambled channels that require a cable box
DVD-VCR
Rear of TV
Wall
VHF/UHF
Match the type
of connector
A
on your TV: A,
B, or C.
or
or
VHF
B
C
For connector
types B and C,
no UHF
connection is
required.
UHF
VHF
Connect this cable
directly to your TV if
you do not have a
cable box.
Cable box
UHF
16 Basic hookups
Download from Www.Somanuals.com. All Manuals Search And Download.
Hookup 2 : DVD-VCR setup
Plug the DVD-VCR into an AC outlet.
The DVD-VCR automatically presets the DVD-VCR’s clock and TV channels
when the DVD-VCR is plugged into the AC outlet.
AC power cord
to AC outlet
The DVD-VCR starts presetting the
clock and channels.
When Auto preset is completed, the
current time appears in the display
window.
You have now completed DVD-VCR setup.
To change the on-screen display language to French or Spanish, see
The clock is set using a time signal provided by some TV channels. If the clock
is incorrect, or “--:--” appears in the display window, see “Using Manual Clock
To add or disable channels manually, see “Presetting/disabling channels
Notes
•
If you connect the AC power cord before the antenna connections are completed, the channels
•
•
Do not press any buttons on the DVD-VCR or remote commander during Auto preset.
Auto preset starts automatically only when you plug in the AC power cord for the first time
after you purchase the DVD-VCR.
•
Auto preset can be performed by pressing x STOP on the unit continuously for 5 seconds or
more with the DVD-VCR power turned off.
continued
Basic hookups 17
Download from Www.Somanuals.com. All Manuals Search And Download.
Hookup 3
Connecting a cable box with many scrambled channels
Recommended use
Use this hookup if your cable system scrambles all or most channels.
What you can do with this hookup
• Record any channel by selecting the channel on the cable box
What you cannot do
• Record with the cable box turned off
• Record one channel while watching another channel
Rear of TV
Cable box
Wall
VHF/UHF
A
Match the type of
connector on your
TV: A, B, or C.
or
or
VHF
B
C
For connector
types B and C, no
UHF connection
is required.
UHF
VHF
DVD-VCR
UHF
After you have completed hookup…
After you have completed hookup, plug the DVD-VCR into an AC outlet and see
AC power cord
to AC outlet
18 Basic hookups
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4 : Selecting a language
You can change the on-screen display
language.
SET UP
Before you start…
• Turn on the DVD-VCR and your TV.
• To control the DVD-VCR, set TV /
DVD·VIDEO to DVD·VIDEO on the
remote (page 9).
• Set the “RF Output Channel” to “3CH” or
“4CH” in “OPTION SETUP” menu
DVD-VCR using A/V connections, set the
TV to video input.
• If the DVD player is in play mode, you
cannot display the “SETUP MENU.” Stop
the DVD playback.
V/v/B/b
ENTER
O RETURN
Press SET UP.
1
The “SETUP MENU” appears.
Press V/v/B/b to select
Idioma/Langue), then press ENTER.
(Language/
2
The “LANGUAGE/IDIOMA/LANGUE”
menu appears.
Press V/v to select the desired language, English, Spanish or French, then
3
4
press ENTER.
Press O RETURN to exit the menu.
Selecting a language 19
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5 : Setting the clock
Using the Auto Clock Set
feature
SET UP
Some TV and cable channels transmit time
signals with their broadcasts. Your DVD-
VCR can pick up this time signal to
automatically set the clock.
The Auto Clock Set feature works only if a
channel in your area is broadcasting a time
signal. If broadcasters in your area are not
yet sending time signals, set the time
V/v/B/b
ENTER
Before you start…
O RETURN
• Turn on the DVD-VCR and your TV.
When using a cable box, turn it on.
• To control the DVD-VCR, set TV /
DVD·VIDEO to DVD·VIDEO on the
remote (page 9).
• Set the “RF Output Channel” to “3CH” or
“4CH” in “OPTION SETUP” menu
DVD-VCR using A/V connections, set the
TV to video input.
• If the DVD player is in play mode, you
cannot display the “SETUP MENU.” Stop
the DVD playback.
Press SET UP.
1
The “SETUP MENU” appears.
Press V/v/B/b to select
Adjust), then press ENTER.
(Clock Set/
2
The “CLOCK SET/ADJUST” menu appears.
20 Setting the clock
Download from Www.Somanuals.com. All Manuals Search And Download.
Press V/v to select “Auto”, then press
3
4
ENTER.
Press V/v to select the item you want. Then press B/b to make the setting.
• For “Clock data CH”
Leave the setting to “Auto” to have the
DVD-VCR automatically search for a
channel that carries a time signal. Press B/b
to select a channel that carries a time signal.
Use this option if you know of a channel that
carries a time signal. Most PBS member
stations broadcast a time signal. For the
fastest response, select your local PBS
station.
• For “Time zone”
Select the time zone of your area, or select
“Auto” to have the DVD-VCR automatically
set your time zone.
The options are:
Auto y Atl. (Atlantic) y East (Eastern)
y Cen. (Central) y Mtn. (Mountain) y
Pac. (Pacific) y Alas (Alaska) y
Haw. (Hawaii) y Auto
• For “Daylight saving”
Select “Yes” or “No” (standard time), or
“Auto” to have the DVD-VCR automatically
set the daylight saving time.
Press O RETURN repeatedly to exit the menu.
5
6
To activate the Auto Clock Set function, turn off the DVD-VCR.
continued
Setting the clock 21
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
•
The clock cannot be set automatically if you do not receive a channel that carries a time
•
If there are only a few channels in your area that carry time signals, setting the clock
automatically may take up to about 20 minutes. If nothing happens even after you wait about
•
•
•
If you made Hookup 3, make sure you leave the cable box on.
To record TV programs using the timer, you must set the clock accurately.
The clock display appears when VIDEO mode is selected with no tape inserted or when the
DVD-VCR is turned off.
Using Manual Clock Set
Before you start…
SET UP
• Turn on the DVD-VCR and your TV.
• To control the DVD-VCR, set TV /
DVD·VIDEO to DVD·VIDEO on the
remote (page 9).
• Set the “RF Output Channel” to “3CH” or
“4CH” in “OPTION SETUP” menu
DVD-VCR using A/V connections, set the
TV to video input.
V/v/B/b
ENTER
• If the DVD player is in play mode, you
cannot display the “SETUP MENU.” Stop
the DVD playback.
O RETURN
Press SET UP.
1
The “SETUP MENU” appears.
Press V/v/B/b to select
(Clock Set/
2
Adjust), then press ENTER.
The “CLOCK SET/ADJUST” menu appears.
22 Setting the clock
Download from Www.Somanuals.com. All Manuals Search And Download.
Press V/v to select “Manual,” then press
3
4
5
ENTER.
Press V/v to set the hour.
Press b to select the minutes and press V/v to
set the minutes.
Set the month, day, and year in the same way as the minutes.
The day of the week is set automatically.
6
7
Press O RETURN to save the clock setting.
Notes
•
•
To record TV programs using the timer, you must set the clock accurately.
The clock display appears when VIDEO mode is selected with no tape inserted or when the
DVD-VCR is turned off.
Setting the clock 23
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 6 : Presetting channels
This DVD-VCR is capable of receiving VHF
channels 2 to 13, UHF channels 14 to 69 and
unscrambled CATV channels 1 to 125. First,
we recommend that you preset the receivable
channels in your area using automatic
SET UP
presetting methods. Then, if there are any
unwanted channels, disable them manually.
If you have already decided which channels
you wish to preset, set them directly using
V/v/B/b
ENTER
Presetting all receivable
channels automatically
Before you start…
• Turn on the DVD-VCR and your TV.
When using a cable box, turn it on.
• To control the DVD-VCR, set TV /
DVD·VIDEO to DVD·VIDEO on the
remote (page 9).
• Set the “RF Output Channel” to “3CH” or
“4CH” in “OPTION SETUP” menu
DVD-VCR using A/V connections, set the
TV to video input.
• If the DVD player is in play mode, you
cannot display the “SETUP MENU.” Stop
the DVD playback.
Press SET UP.
1
The “SETUP MENU” appears.
Press V/v/B/b to select
(Channel
2
Setup), then press ENTER.
The “CHANNEL SETUP” menu appears.
24 Presetting channels
Download from Www.Somanuals.com. All Manuals Search And Download.
Press V/v to select “Ant/Cable.”
3
4
• To preset cable TV channels:
Press B/b to select “Cable TV.”
• To preset VHF and UHF channels:
Press B/b to select “Antenna.”
Press V/v to select “Auto channel memory,”
then press ENTER.
5
All receivable channels are preset in numerical
sequence. When no more receivable channels
can be found, presetting stops and the picture
from the lowest numbered channel is displayed
on the TV screen.
continued
Presetting channels 25
Download from Www.Somanuals.com. All Manuals Search And Download.
Presetting/disabling channels manually
Before you start…
• Turn on the DVD-VCR and your TV.
When using a cable box, turn it on.
• To control the DVD-VCR, set TV /
DVD·VIDEO to DVD·VIDEO on the
remote (page 9).
CH +/–
• Set the “RF Output Channel” to “3CH” or
“4CH” in “OPTION SETUP” menu
DVD-VCR using A/V connections, set the
TV to video input.
Number
buttons
• If the DVD player is in play mode, you
cannot display the “SETUP MENU.” Stop
the DVD playback.
SET UP
V/v/B/b
ENTER
Press SET UP.
1
The “SETUP MENU” appears.
Press V/v/B/b to select
Setup) then press ENTER.
(Channel
2
3
The “CHANNEL SETUP” menu appears.
Press V/v to select “Channel add/delete,” then press ENTER.
26 Presetting channels
Download from Www.Somanuals.com. All Manuals Search And Download.
To preset/disable a channel:
Channel to be preset
4
1 Press CH +/– or number buttons to enter
the channel number.
2 Press B/b to select ADD (in memory) or
DELETE (deleted).
3 Press ENTER.
Channel to be disabled
Press O RETURN repeatedly to exit the menu.
5
Presetting channels 27
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic Operations
Playing discs
Depending on the disc, some operations may
be different or restricted. Refer to the
operating instructions supplied with your
disc.
?/1
Z
Before you start ...
• Turn on the DVD-VCR and your TV.
• Switch the input selector on your TV so
that the signal from the player appears on
the TV screen.
• Set TV / DVD·VIDEO to DVD·VIDEO,
then press SELECT DVD to control the
DVD player (page 9).
m/M
C
./ >
X PAUSE
x STOP
H PLAY
Press Z to open the disc tray and
place a disc on the disc tray.
1
with the playback side
facing down
28 Playing discs
Download from Www.Somanuals.com. All Manuals Search And Download.
Press H PLAY.
2
The disc tray closes and the
DVD player starts playback.
The display window shows the
playback time*.
Hour Minute Second
Depending on the disc, a menu
may appear on the TV screen.
* “– – – – –” appears when no disc is loaded.
Additional tasks
To
Press
Stop play
x STOP
X PAUSE
H PLAY
C
Pause play*
Resume play after pause
Advance by frame in pause mode
Go to the next chapter, track, or scene > on the remote
in continuous play mode
Go back to the previous chapter, track, . on the remote
or scene in continuous play mode
Stop play and remove the disc
Z
* If you pause the DVD player for more than 5 minutes, the DVD player will automatically stop.
To Resume playback for the current disc (Resume Play)
The DVD player remembers the point where you stopped the disc even if the DVD
player enters standby mode by pressing ?/1.
While playing a disc, press x STOP to stop playback.
1
2
Press H PLAY.
The DVD player starts playback from the point where you stopped the disc in
Step 1.
To locate a point quickly by playing a disc in fast forward or fast reverse
in continuous play mode (DVD, VIDEO CD and CD only)
Press m or M.
For DVD or Video CD, each time you press the button, the playback speed changes
as follows.
× 2 t FF1/FR1 t FF2/FR2 t FF3/FR3 t FF4/FR4 t FF5/FR5 (DVD only)
Release the button at the desired speed.
For CD, the searching speed does not change (FF2/FR2 play).
When you find the point you want, press H PLAY.
continued
Playing discs 29
Download from Www.Somanuals.com. All Manuals Search And Download.
To watch slow motion in continuous play mode (DVD and VIDEO CD
only)
Press X PAUSE, then press M SLOW y. With each press, the playback speed
changes cyclically as follows.
To resume normal playback, press H PLAY.
Notes
•
•
•
Do not perform VIDEO playback while playing back a disc.
If you play a DVD or VIDEO CD that has scratches, the player may stop playback at the
point of the scratch.
•
•
•
•
You cannot change the MP3 or the Multi Session CD playback speed.
VIDEO CD fast forward/reverse and slow motion play cannot be paused.
During CD fast forward/reverse play, no sound is output.
The PROGRESSIVE button is not available when the DVD player is in play mode. Use the
PROGRESSIVE button in stop mode.
Notes on playing DTS* sound tracks on a CD
•
When playing DTS-encoded CDs, excessive noise will be heard from the analog stereo jacks.
To avoid possible damage to the audio system, the consumer should take proper precautions
enjoy DTS Digital Surround™ playback, an external 5.1-channel decoder system must be
connected to the digital jack of the DVD player.
•
•
Set the sound to “STEREO” using the AUDIO button when you play DTS sound tracks on a
CD (page 69).
Do not play DTS sound tracks without first connecting the DVD player to an audio
component having a built-in DTS decoder. The DVD player outputs the DTS signal via the
DIGITAL AUDIO OUT (COAXIAL or OPTICAL) jack even if “DTS” is set to “Off” in
“AUDIO SETUP” menu (page 49), and may affect your ears or cause your speakers to be
damaged.
•
•
•
DTS audio signals are output only through the DIGITAL AUDIO OUT (COAXIAL or
OPTICAL) jack.
When you play a DVD with DTS sound tracks, set “DTS” to “On” in “AUDIO SETUP”
menu (page 49).
If you connect the player to audio equipment without a DTS decoder, do not set “DTS” to
“On” in “AUDIO SETUP” menu (page 49). A loud noise may come out from the speakers,
affecting your ears or causing the speakers to be damaged.
* “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
30 Playing discs
Download from Www.Somanuals.com. All Manuals Search And Download.
Guide to the on-screen display
You can check disc information during
playback.
V/v/B/b
ENTER
The displayed contents differ according to
the type of disc being played.
O RETURN
DISPLAY
Press DISPLAY. The following information appears; type of disc, current title/track,
chapter, counter position, voice language, subtitle language and surround setting.
language.
Type of disc
Current title/track number
Current chapter number
Counter position
Voice language
Subtitle language
Surround setting
You can playback the desired title/track, chapter or counter position using this menu.
To playback the desired title/track or chapter
Press V/v to select the desired item.
1
Press B/b to change the item.
2
Press ENTER to start playback.
3
4
Press DISPLAY or O RETURN to turn off the menu.
The title/track or chapter icon will appear on the DVD playback screen followed by
the current title/track or chapter number and the counter positon.
continued
Guide to the on-screen display 31
Download from Www.Somanuals.com. All Manuals Search And Download.
To playback from the desired title/track counter
position
Press V/v to select the counter position icon.
1
Enter the desired elapsed playing time of the current
2 title/track using the number buttons.
Press ENTER to start playback.
3
Press DISPLAY or O RETURN to turn off the
4 menu.
Tip
•
You can change the counter position information (playing time or remaining time) using
B/b (DVD and CD only).
DVD
Indication
Counter information
T
∗ : ∗∗ : ∗∗
Elapsed playing time of the current title
Remaining time of the current title
Elapsed playing time of the current chapter
Remaining time of the current chapter
T– ∗ : ∗∗ : ∗∗
C
∗ : ∗∗ : ∗∗
C– ∗ : ∗∗ : ∗∗
CD
Indication
Counter information
T
∗ : ∗∗ : ∗∗
Elapsed playing time of the current track
Remaining time of the current track
Elapsed playing time of the disc
Remaining time of the disc
T– ∗ : ∗∗ : ∗∗
D ∗ : ∗∗ : ∗∗
D– ∗ : ∗∗ : ∗∗
Notes
•
•
The display may not change as operated depending on the disc.
The display window continue indicating the playing time even when the counter position
information on the on-screen display is being changed.
32 Guide to the on-screen display
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a tape
Before you start ...
• Turn on the DVD-VCR and your TV.
?/1
Z
• Switch the input selector on your TV so
that the signal from the player appears on
the TV screen.
TRACKING +/–
CLEAR
• Set TV / DVD·VIDEO to DVD·VIDEO,
then press SELECT VIDEO to control the
REPLAY
MSLOWy
m
./ >
C SKIP
X PAUSE
x STOP
H PLAY
DISPLAY
Insert a tape.
1
The VCR starts playing automatically if
you insert a tape with its safety tab
removed.
continued
Playing a tape 33
Download from Www.Somanuals.com. All Manuals Search And Download.
Press H PLAY.
2
The display window shows the
playback time.
When the tape reaches the end,
it will rewind automatically.
Hour Minute Second
Additional tasks
To
Press
Stop play
x STOP
X PAUSE
Pause play*
Resume play after pause
Fast-forward the tape
Rewind the tape
Eject the tape
X PAUSE or H PLAY
M during stop
m during stop
Z
* If you pause the VCR for more than 5 minutes, the VCR will automatically resume play.
To play a recently watched scene
You can immediately rewind and playback the scene you want to watch again.
During playback, press REPLAY. The VCR rewinds the tape about 10 seconds in the
SP mode (about 15 seconds in the EP mode) on the counter for each press of the
button, and restarts playback.
To skip playback
You can skip a scene that you do not want to watch (such as a commercial) and restart
playback.
During playback, press C SKIP. The VCR skips the tape 30 seconds on the counter
each time the button is pressed (up to four times) and playback is resumed.
To turn off the power while rewinding (Rewind Shut Off)
Press ?/1 while the tape is rewinding. The power will turn off but the tape will keep
rewinding until it reaches the end.
To play/search at various speeds
Playback options
Operation
View the picture during fast-
forward or rewind
During fast-forward, hold down M. During rewind, hold
down m.
Play at high speed
•
•
During playback, briefly press M or m. The tape
continues to play at 5 times normal speed.
During playback, hold down M or m. The tape
continues to play at 5 times normal speed. When you
release the button, normal playback resumes.
34 Playing a tape
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback options
Play in slow motion
Play frame by frame
Operation
During pause, press MSLOW y.
During pause, press C SKIP.
Play at various speeds
(Shuttle play)
During playback, press .or > SHUTTLE. You can
change the playback speed as follows.
–× 7 y –× 5 y –× 3 y STILL y SLOW y PLAY
y × 2 y × 3 y × 5 y × 7
To resume normal playback
Press H PLAY.
To use the time counter
Press CLEAR at the point on the tape that you want to find later. The counter in the
display window resets to “0:00:00.” To search for the counter 0:00:00 point
To display the counter on the TV screen, press DISPLAY during normal playback.
Tip
•
Adjust the picture using the TRACKING +/– buttons if:
– Streaks appear while playing in slow motion.
– The picture shakes during pause.
Notes
•
Tapes recorded in the LP mode on other VCRs can be played back on this VCR but the
picture quality cannot be guaranteed.
•
•
•
The counter resets to “0:00:00” whenever a tape is reinserted.
The counter stops counting when it comes to a portion with no recording.
When 10 hours have passed, the counter in the display window returns to “0:00:00” and the
count starts over again.
•
•
•
The sound is muted during playback at various speeds.
The picture may show noise when playing at high speed in reverse.
While playing a tape, you can display the “SETUP MENU” but the remote commander’s
function switches to DVD automatically. Press O RETURN repeatedly to exit the menu.
•
When playback does not start even if you insert a tape with its safety tab removed, set “Auto
•
•
Stop disc playback while playing back a video.
The VCR can also play S-VHS tapes. The VCR will automatically identify the type of tape
inserted in the VCR (either VHS or S-VHS). When S-VHS tapes are played in the VCR, the
enhanced resolution will not be visible on screen; there may also be picture distortion while
playing the S-VHS tape in slow motion or while utilizing other special playback modes. The
VCR will not record in S-VHS mode on an S-VHS tape.
Playing a tape 35
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording TV programs
Before you start ...
• Turn on the DVD-VCR and your TV.
?/1
Z
• Switch the input selector on your TV so
that the signal from the player appears on
the TV screen.
CH +/–
• Set TV / DVD·VIDEO to DVD·VIDEO,
then press SELECT VIDEO to control the
• To record from a cable box, turn it on.
• Make sure the tape is longer than the total
recording time.
SP/EP
TV/VIDEO
INPUT
SELECT
z REC
x STOP
H PLAY
ENTER
DISPLAY
Insert a tape with its safety tab in place.
1
Press CH +/– to select the channel or line input video source you want to
record.
2
36 Recording TV programs
Download from Www.Somanuals.com. All Manuals Search And Download.
Press SP/EP to select the tape speed, SP or EP.
3
4
EP (Extended Play) provides recording time three times as long as SP
(Standard Play). However, SP produces better picture and audio quality.
Press z REC to start recording.
“REC” appears in the display window.
To stop recording
Press x STOP.
To check the remaining tape length
Press DISPLAY to display the time counter. With the display on, press DISPLAY
again to check the remaining time. The white bar indicates the current location in
relation to the entire tape length. The remaining time also appears. Press DISPLAY
to turn off the indicators.
Time counter
Remaining tape length
To check the remaining tape length of a tape, set “Tape Length” in the “VIDEO
Maximum Recording Time
Tape Length
T-120
SP
2 hrs
EP
6 hrs
8 hrs
9 hrs
T-160
2 hrs 40 mins
3 hrs
T-180
continued
Recording TV programs 37
Download from Www.Somanuals.com. All Manuals Search And Download.
To watch another TV program while recording
Press TV/VIDEO to display “TV” in the display window.
1
If your TV is connected to the VCR using A/V connections, set the TV to the
2 TV’s antenna input; if not, skip this step.
Select another channel on the TV.
3
To watch a DVD while recording
Press SELECT DVD to control the DVD player.
1
2
3
Press Z and place the disc on the disc tray.
Press H PLAY.
The disc tray closes and the DVD player starts playback. The TV screen will
automatically change to the DVD playback screen.
To save a recording
To prevent accidental erasure, break
off the safety tab as illustrated. To
record on the tape again, cover the tab
hole with adhesive tape.
Safety tab
Tips
•
•
•
•
To select a channel, you can use the
number buttons on the remote commander. Enter the channel number, then press ENTER.
You can select a video source from the LINE IN 1 or LINE-2 IN jacks using the INPUT
SELECT button.
The display appears on the TV screen indicating information about the tape, but the
information will not be recorded on the tape.
If you do not want to watch TV while recording, you can turn off the TV. When using a cable
box, make sure to leave it on.
Notes
•
The remaining tape length may not be indicated accurately for short tapes such as T-20 or
T-30, or tapes recorded in the LP mode.
•
It may take up to one minute for the VCR to calculate and display the remaining tape length
after you press DISPLAY.
•
•
You cannot record a DVD to a VCR tape.
To watch a TV program during video recording, stop disc playback.
38 Recording TV programs
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording TV programs using the timer
You can preset up to eight programs at a
time.
?/1
Before you start…
• Check that the DVD-VCR clock is set to
the correct time.
• Turn on the DVD-VCR and your TV.
• Switch the input selector on your TV so
that the signal from the player appears on
the TV screen.
• Set TV / DVD·VIDEO to DVD·VIDEO,
CLEAR
SET UP
then press SELECT VIDEO to control the
TIMER
INPUT
• When using a cable box, turn it on.
SELECT
• Insert a tape with its safety tab in place.
Make sure the tape is longer than the total
recording time.
x STOP
• If the DVD player is in play mode, you
cannot display the “SETUP MENU.” Stop
the DVD playback.
V/v/B/b
ENTER
O RETURN
Press SET UP.
1
The “SETUP MENU” appears.
You can also use the TIMER button in VIDEO
mode, then you can skip step 2.
continued
Recording TV programs using the timer 39
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Press V/v/B/b to select
Recording), then press ENTER.
(Set Timer
The program menu appears.
If necessary, press V/v to select the row that is to be set.
3
4
Set the channel number, start and stop time,
date, and tape speed:
1 Press b to flash each item in turn.
2 Press V/v to set each item.
To correct a setting, press B to return to that
setting and reset.
To record from a source connected to the LINE IN 1 or LINE-2 IN jacks,
press INPUT SELECT or V/v to display “L1 ” or “L2” in the “CH”
position.
To record the same program every day or the same day every week, press v
while the date is flashing. For details, see “Daily/weekly recording” below.
To use the Auto Tape Speed function, press v to display “AUTO” in the
Press O RETURN to confirm the setting.
5
6
The indicator appears in the display window.
To enter another setting, press V/v to select the next row and repeat step 4.
Press CLEAR repeatedly to cancel the setting.
Press O RETURN repeatedly to exit the menu.
The DVD-VCR stands by for recording (timer recording will operate
properly regardless if the DVD-VCR power is on or off). When using a
cable box, leave it on.
40 Recording TV programs using the timer
Download from Www.Somanuals.com. All Manuals Search And Download.
To stop recording
To stop the DVD-VCR while recording, press SELECT VIDEO and then press
x STOP.
Daily/weekly recording
In step 4 above, press v to select the recording pattern. Each time you press v, the
indication changes as shown below. Press V to change the indication in reverse order.
MO~FR t SUN’S t MON’S t ..... t SAT’S t 1 month later t (dates count
down) t the current date
To use the Auto Tape Speed function
When you are recording a program in the AUTO mode and the remaining tape
becomes shorter than the recording time, the tape speed is automatically changed to
the EP mode. Note that some noise will appear on the picture when the tape speed is
changed. If you want to keep the tape speed, select SP. To operate this function, set
To watch another TV program after setting the timer
Press TV/VIDEO to display “TV” in the display window.
1
If your TV is connected to the VCR using A/V connections, set the TV to the
2 TV’s antenna input; if not, skip this step.
Select another channel on the TV.
3
To watch a DVD after setting the timer
Press SELECT DVD to control the DVD player.
1
2
3
Press Z and place the disc on the disc tray.
Press H PLAY.
The disc tray closes and the DVD player starts playback. The TV screen will
automatically change to the DVD playback screen.
Tips
•
•
To set the channel, you can also use V/v.
If the indicator appears, the timer settings overlap. To check, change or cancel the program
•
•
If the
indicator appears, this means that the VCR is currently recording this program.
You can also do the following tasks while the VCR is recording:
Recording TV programs using the timer 41
Download from Www.Somanuals.com. All Manuals Search And Download.
Checking/changing/canceling timer
settings
?/1
CLEAR
SET UP
TIMER
V/v/B/b
ENTER
O RETURN
Press SET UP when the DVD player is in stop
mode.
1
The “SETUP MENU” appears.
You can also use the TIMER button in VIDEO
mode, then you can skip step 2.
42 Checking/changing/canceling timer settings
Download from Www.Somanuals.com. All Manuals Search And Download.
Press V/v/B/b to select
“Set Timer Recording”, then press ENTER.
2
3
• If you want to change a setting, go on to the next step.
• If you do not need to change the settings, press O RETURN repeatedly
to exit the menu, then turn off the VCR to return to recording standby.
Press V/v to select setting you want to change
or cancel.
• To change the setting, press B/b to flash the
item you want to change, and press V/v to
change it.
• To cancel the setting, press CLEAR.
Press O RETURN to confirm the setting.
4
5
The indicator appears in the display window.
Press O RETURN repeatedly to exit the menu.
The DVD-VCR stands by for recording (you do not have to turn off the
DVD-VCR). When using a cable box, leave it on.
When the timer settings overlap
The program that starts first has priority and the second program starts recording only
after the first program has finished. If the programs start at the same time, the
program listed first in the menu has priority.
Program 1
Program 2
Will be cut off
Checking/changing/canceling timer settings 43
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced Hookups
A/V Receiver hookup
A Use this hookup if your A/V receiver has a Dolby* Surround (Pro
Logic) decoder and 3 to 6 speakers
You can enjoy the Dolby Surround effects only when playing Dolby Surround audio
or multi-channel audio (Dolby Digital) discs.
∗ Manufactured under license from Dolby Laboratories. “Dolby,” “Pro Logic,” and the double-
D symbol are trademarks of Dolby Laboratories.
DVD-VCR
(red)
Stereo audio cord
(not supplied)
(white)
to LINE OUT L/R (AUDIO)
(white)
(red)
l: Signal flow
to audio input
[Speakers]
Front (L)
[Speakers]
Amplifier (receiver) with Dolby
Surround decoder
Rear (L)
Rear (R)
Front (R)
Rear (mono)
Subwoofer
Center
Note
•
When connecting 6 speakers, replace the monaural rear speaker with a center speaker, 2 rear
speakers and a subwoofer.
44 A/V Receiver hookup
Download from Www.Somanuals.com. All Manuals Search And Download.
B Use this hookup if your A/V reciever has a Dolby Digital or DTS*
decoder, a digital input jack and 6 speakers
This connection will allow you to use the Dolby Digital or DTS decoder function of
your AV amplifier (receiver). You are not able to enjoy the surround sound effects of
B-1
B-2
this player. You must make connections using
and
.
∗ “DTS” and “DTS Digital Out” are trademarks of Digital Theater Systems, Inc.
DVD-VCR
Coaxial digital cord
(not supplied)
(red)
Stereo audio cord
(not supplied)
and
or
to DIGITAL OUT
(COAXIAL or OPTICAL)
(white)
Optical digital cord
(not supplied)
Remove jack cap
before connecting
to LINE OUT L/R (AUDIO)
(white)
(red)
l: Signal flow
to audio input
to coaxial or optical
digital input
[Speakers]
[Speakers]
AV amplifier (receiver) having
a decoder
Rear (L)
Subwoofer
Front (L)
Center
Rear (R)
Front (R)
Note
•
After you have completed the connection, be sure to set “Dolby Digital” to “Dolby Digital”
come from the speakers.
A/V Receiver hookup 45
Download from Www.Somanuals.com. All Manuals Search And Download.
S-Video/Component Video hookup
Make audio connections using the LINE OUT AUDIO L/R jacks or DIGITAL AUDIO OUT
(OPTICAL or COAXIAL) jacks on the right side of the DVD-VCR when you use S-VIDEO/
Component Video hookup.
A Use this hookup if your TV has an S VIDEO input jack
Connect an S VIDEO cord (not supplied). You will enjoy high quality images.
DVD-VCR
TV
l : Signal flow
(DVD only)
or
or
Audio cord
(not supplied)
Coaxial
digital cord
(not supplied)
Optical digital
cord (not
supplied)
S VIDEO cord
(not supplied)
Remove jack
cap before
connecting
to audio
input
to coaxial or optical
digital input
TV or AV amplifier
Notes
•
from the S VIDEO jack.
•
The connection using S VIDEO OUT jack is only for the DVD player.
46 S-Video/Component Video hookup
Download from Www.Somanuals.com. All Manuals Search And Download.
B Use this hookup if your TV has component video input jacks
Connect your TV via the COMPONENT VIDEO OUT jacks using a component
video cord (not supplied) or three video cords (not supplied) of the same kind and
length. You will enjoy accurate color reproduction and high quality images.
See page 46 for audio connections.
DVD-VCR
(blue) (red)
(green)
TV
Component video cord
(green)
(not supplied)
(blue)
(red)
l : Signal flow
(DVD only)
If your TV accepts progressive (480p) format signals, you must use this connection
and then press the PROGRESSIVE button on the front panel when the DVD player is
in stop mode to accept progressive video signals. The PROGRESSIVE indicator
lights up in blue when the DVD player outputs progressive signals.
PROGRESSIVE button/indicator
Notes
•
from the component video jacks.
•
•
The connection using COMPONENT VIDEO OUT jack is only for the DVD player.
The PROGRESSIVE button is not available when the DVD player is in play mode. Use the
PROGRESSIVE button in stop mode.
S-Video/Component Video hookup 47
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Settings and Adjustements
Audio Setup
“Audio Setup” allows you to set the sound
according to the playback and connection
conditions.
SET UP
V/v/B/b
ENTER
O RETURN
Press SET UP when the DVD player is in stop
mode.
1
2
3
The “SETUP MENU” appears.
Press V/v/B/b to select
then press ENTER.
(DVD Setup),
The “DVD SETUP” menu appears.
Press V/v to select “Audio Setup,” then press
ENTER.
48 Audio Setup
Download from Www.Somanuals.com. All Manuals Search And Download.
Press V/v to select the setup item from the displayed list:
4
5
“Dolby Digital,” “DTS,” or “Audio DRC.”
Press B/b to select an item, then press O RETURN to confirm the setting.
Press O RETURN repeatedly to exit the menu.
6
Menu choices
• Dolby Digital (DVD only)
Selects the type of Dolby Digital signal.
The default setting is indicated in bold print.
D-PCM
Select this when the player is connected to an audio component
lacking a built-in Dolby Digital decoder.
Dolby Digital
Select this when the player is connected to an audio component
with a built-in Dolby Digital decoder.
• DTS (DVD only)
Selects whether or not to output DTS signals.
The default setting is indicated in bold print.
Off
Select this when the player is connected to an audio component
lacking a built-in DTS decoder.
On
Select this when the player is connected to an audio component
with a built-in DTS decoder.
• Audio DRC (Dynamic Range Control) (DVD only)
Makes the sound clear when the volume is turned down when playing a DVD that
conforms to “Audio DRC.” This affects the output from the following jacks:
– LINE OUT AUDIO L/R jacks
– DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack only when “Dolby
Digital” is set to “D-PCM”.
The default setting is indicated in bold print.
Standard
Normally select this position.
TV Mode
Makes the low sounds clear even if you turn the volume down.
continued
Audio Setup 49
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
•
If you select surround setting while playing a DVD, the player does not output Dolby Digital
signals from the DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack (when you set
“Dolby Digital” to “D-PCM”).
•
If you connect a component that does not conform to the selected audio signal, a loud noise
(or no sound) will come out from the speakers, affecting your ears or causing the speakers to
be damaged.
50 Audio Setup
Download from Www.Somanuals.com. All Manuals Search And Download.
Screen Setup
“Screen Setup” allows you to set the screen
according to the playback and connection
conditions.
SET UP
V/v/B/b
ENTER
O RETURN
Press SET UP when the DVD player is in stop
mode.
1
2
3
The “SETUP MENU” appears.
Press V/v/B/b to select
then press ENTER.
(DVD Setup),
The “DVD SETUP” menu appears.
Press V/v to select “Screen Setup,” then press
ENTER.
continued
Screen Setup 51
Download from Www.Somanuals.com. All Manuals Search And Download.
Press V/v to select the setup item from the displayed list:
4
5
“TV Type,” “Black Level,” or “Video Out.”
Press B/b to select an item, then press O RETURN to confirm the setting.
Press O RETURN repeatedly to exit the menu.
6
Menu choices
• TV Type
Selects the aspect ratio of the connected TV (4:3 standard or wide).
The default setting is indicated in bold print.
4:3 Letter Box
Select this when you connect a 4:3 screen TV. Displays a wide
picture with bands on the upper and lower portions of the screen.
4:3 Pan Scan
Select this when you connect a 4:3 screen TV. Automatically
displays the wide picture on the entire screen and cuts off the
portions that do not fit.
16:9
Select this when you connect a wide-screen TV or a TV with a wide
mode function.
4:3 Letter Box
4:3 Pan Scan
16:9
• Black Level
You can enhance the black level by increasing the brightness and contrast when
viewing DVDs with the PROGRESSIVE indicator turned off.
The default setting is indicated in bold print.
On
Increases the contrast.
Off
Stops the increase of the contrast.
52 Screen Setup
Download from Www.Somanuals.com. All Manuals Search And Download.
• Video Out
You must set this setting when you use S VIDEO OUT or COMPONENT VIDEO
OUT jacks to connect to the TV.
The default setting is indicated in bold print.
S-Video
Select this when you use the S VIDEO OUT jack on the rear panel
to connect to the TV.
Component
Select this when you use the COMPONENT VIDEO OUT jacks
on the rear panel to connect to the TV.
Tip
•
You can select the type of signal output from the COMPONENT VIDEO OUT jacks.
When you press the PROGRESSIVE button on the front panel when the DVD player is in
stop mode, progressive signal is selected and the PROGRESSIVE indicator lights up in blue.
Select this when you have a TV that can accept progressive signal.
When you are connected to a standard (interlace format) TV, turn off the PROGRESSIVE
indicator.
Notes
•
•
•
•
Playback settings stored in the disc take priority over the “DVD SETUP” menu settings and
not all the functions described may work.
Depending on the DVD, “4:3 Letter Box” may be selected automatically instead of “4:3 Pan
Scan” or vice versa.
The connection using S VIDEO OUT or COMPONENT VIDEO OUT jacks is only for the
DVD player.
If you select progressive signal when you connect the DVD player to a TV that cannot accept
the signal in progressive format, the image quality will deteriorate. In this case, press the
PROGRESSIVE button to turn off the PROGRESSIVE indicator.
•
•
You can output progressive signal only from COMPONENT VIDEO OUT jacks. If you turn
on the PROGRESSIVE indicator when you set “Video Out” to “S-video”, COMPONENT
VIDEO OUT takes priority over S VIDEO OUT.
The PROGRESSIVE button is not available when the DVD player is in play mode. Use the
PROGRESSIVE button in stop mode.
Screen Setup 53
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the display or sound track
language
You can set various languages for the disc’s
menu, sound track or subtitle.
SET UP
V/v/B/b
ENTER
O RETURN
Press SET UP when the DVD player is in stop
mode.
1
The “SETUP MENU” appears.
Press V/v/B/b to select
(DVD Setup),
2
3
then press ENTER.
The “DVD SETUP” menu appears.
Press V/v to select the language setup item from the displayed list:
“DVD Menu,” “Audio,” or “Subtitle.”
Then press ENTER.
54 Setting the display or sound track language
Download from Www.Somanuals.com. All Manuals Search And Download.
Press V/v to select the desired language, then press ENTER.
4
• DVD MENU LANGUAGE
You can select the desired language for the
disc’s menu.
• AUDIO LANGUAGE
Switches the language of the sound track.
When you select “Original,” the language
given priority in the disc is selected.
• SUBTITLE LANGUAGE
Switches the language of the subtitle
recorded on the DVD.
Press O RETURN repeatedly to exit the menu.
5
Tip
If you select “Others” in step 4, an additional language
menu appears. Press V/v/B/b to select the desired
language, then press ENTER.
Notes
•
When you select a language that is not recorded on the DVD in step 4, one of the recorded
languages will be automatically selected.
•
Playback settings stored in the disc take priority over the DVD SETUP settings and not all the
functions described may work.
Setting the display or sound track language 55
Download from Www.Somanuals.com. All Manuals Search And Download.
Parental Control (limiting playback by children)
Playback of some DVDs can be limited
according to a predetermined level such as
the age of the users. The “PARENTAL
CONTROL” function allows you to set a
playback limitation level.
Number
buttons
SET UP
V/v/B/b
ENTER
Press SET UP when the DVD player is in stop
mode.
1
The “SETUP MENU” appears.
Press V/v/B/b to select
then press ENTER.
(DVD Setup),
2
The “DVD SETUP” menu appears.
56 Parental Control (limiting playback by children)
Download from Www.Somanuals.com. All Manuals Search And Download.
Press V/v to select “Parental,” then press
3
4
ENTER.
Press b to select “Yes”.
• If you have not entered a password
The display for registering a new password
appears.
Enter a 4-digit password using the number
buttons.
The display for confirming the password
appears.
Re-enter the password.
• When you have already registered a
password
The display for entering the password appears.
Enter a 4-digit password using the number
buttons.
Press V/v to select “Rating Level,” then press
ENTER.
5
continued
Parental Control (limiting playback by children) 57
Download from Www.Somanuals.com. All Manuals Search And Download.
Press V/v to select the level you want, then
6
7
press ENTER.
The options are as follows.
Level 8 (Adult) y Level 7 y Level 6 y
Level 5 y Level 4 y Level 3 y Level 2
y Level 1 (Kids Safe)
The lower the value, the stricter the limitation.
Press O RETURN repeatedly to exit the menu.
To change the password
Select “Change Password” in step 4.
1 The display for entering a new password appears.
Enter a new 4-digit password using the number buttons.
2 The display for confirming the password appears.
Re-enter the new password.
3
To turn off the Parental Control function
Set “Use Password” to “No” in Step 4.
To play a disc for which Parental Control is set
Insert the disc, then press H PLAY.
1 The display for entering your password appears.
Enter your 4-digit password using the number buttons.
2 The player starts playback.
If you forget your password
Remove the disc and turn off the DVD-VCR.
1
2
Turn on the DVD-VCR again with no disc in the unit.
Hold down m and M on the front panel simultaneously for 5 seconds.
3 “reset ok” appears on the screen.
Turn off the DVD-VCR.
4 The password is cleared.
5
Notes
•
When you play DVDs which do not have the Parental Control function, playback cannot be
limited on this player.
•
•
All the ratings higher than the level you select will be blocked.
Write your password down and keep it in a safe place in case you forget it.
58 Parental Control (limiting playback by children)
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Additional Operations
Using the DVD’s menu
A DVD is divided into long sections of a
picture or a music feature called “titles.”
When you play a DVD which contains
several titles, you can select the title you
want using the TOP MENU button.
Number
buttons
When you play DVDs that allow you to
select items such as the language for the
subtitles and the language for the sound,
select these items using the MENU button.
V/v/B/b
ENTER
MENU
TOP
MENU
Press TOP MENU or MENU.
1
The disc’s menu appears on the TV screen.
The contents of the menu vary from disc to disc.
Press V/v/B/b to select the item you want to play or change.
2
3
You can also use the number buttons to select the item.
Press ENTER.
Note
Depending on the DVD, you may not be able to use the TOP MENU button.
•
Using the DVD’s menu 59
Download from Www.Somanuals.com. All Manuals Search And Download.
Zooming into a scene
You can zoom into a scene during playback
or still mode. To zoom into a JPEG image,
ZOOM
V/v/B/b
ENTER
Press ZOOM.
1
“
” appears.
Press V/v/B/b to move “
” to the position where you want to zoom in.
2
3
Press ENTER repeatedly to change the magnification.
Each time you press the button, the magnification changes as shown below.
2× t 4× t 2× t normal magnification
Notes
•
•
You cannot use 4× magnification when you play VIDEO CDs.
The zoom function may not work depending on the DVD.
60 Zooming into a scene
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the angles
If various angles (multi-angles) for a scene
ANGLE
are recorded on the DVD, “ ” appears in
the display when you press ANGLE during
playback. This means that you can change
the viewing angle.
B/b
Press ANGLE during playback.
1
The angle number appears on the display.
The number after the slash indicates the total
number of angles.
Press B/b repeatedly to select the angle number.
2
The scene changes to the selected angle.
Note
•
Depending on the DVD, you may not be able to change the angles even if multi-angles are
recorded on the DVD.
Changing the angles 61
Download from Www.Somanuals.com. All Manuals Search And Download.
Displaying the subtitle
If subtitles are recorded on the disc, you can
change the subtitles or turn them on and off
whenever you want while playing a DVD.
SUBTITLE
V/v/B/b
ENTER
Press SUBTITLE during playback.
1
Press B/b repeatedly to select the language.
2
Depending on the DVD, the choice of language varies.
of the language.
Press V/v repeatedly to select “On.”
3
To turn off the subtitles
Select “Off” in step 3.
Note
•
Depending on the DVD, you may not be able to change the subtitles even if multilingual
subtitles are recorded on it. You also may not be able to turn them off.
62 Displaying the subtitle
Download from Www.Somanuals.com. All Manuals Search And Download.
Various play mode functions (Program play,
Shuffle play, Repeat play)
You can set the following play modes:
Note
•
The play mode is canceled when:
– you open the disc tray
– the player enters standby mode by pressing [/1.
Creating your own program (Program play)
You can play the contents of a disc in the
order you want by arranging the order of the
tracks on the disc to create your own
Number
buttons
program. You can program up to 20 tracks.
CLEAR
REPEAT
H PLAY
V/v/B/b
ENTER
continued
Various play mode functions (Program play, Shuffle play, Repeat play) 63
Download from Www.Somanuals.com. All Manuals Search And Download.
Press REPEAT when the DVD player is in stop
mode.
1
2
3
Press B/b to select “PROGRAM”, then press
ENTER.
Press V/v/B/b to select the track number you
want to program, then press ENTER.
You can also use the number buttons to enter
the track number.
To program other tracks, repeat step 3.
4
5
The programed track numbers are displayed in the selected order.
Press H PLAY to start program play.
Program play starts.
When the program ends, you can restart the same program again by
pressing H PLAY.
To stop program play
Press CLEAR.
To change or cancel a program
1
Press CLEAR.
2 The last programed number is canceled.
Follow step 3 for new programing.
3
64 Various play mode functions (Program play, Shuffle play, Repeat play)
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing in random order (Shuffle play)
You can shuffle the playback order of tracks.
Subsequent “shuffling” may produce a
different playing order.
CLEAR
REPEAT
V/v/B/b
ENTER
Press REPEAT when the DVD player is in stop
mode.
1
Press B/b to select “SHUFFLE”, then press
ENTER.
2
To return to normal play
Press CLEAR.
Tip
•
When “SHUFFLE” is selected, shuffle play will continue until cancelled.
continued
Various play mode functions (Program play, Shuffle play, Repeat play) 65
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing repeatedly (Repeat play)
You can play all of the titles or tracks on a
disc or a single title, chapter, or track
repeatedly.
CLEAR
REPEAT
B/b
Press REPEAT during playback.
1
Press REPEAT or B/b repeatedly to select the item to be repeated.
2
When playing a DVD
• Chapter: repeats the current chapter.
• Title: repeats the current title on a disc.
When playing a VIDEO CD or CD
• Track: repeats the current track.
• Disc: repeats all of the tracks.
When playing a DATA CD (MP3 audio)
• Track: repeats the current track.
To return to normal play
Select “Off” or press CLEAR in step 2.
66 Various play mode functions (Program play, Shuffle play, Repeat play)
Download from Www.Somanuals.com. All Manuals Search And Download.
Using bookmarks
You can store scenes in the player’s memory
as bookmarks.
You can set up to three bookmarks.
CLEAR
Select “MENU OFF” before setting up
bookmarks on a VIDEO CD (see “Playing
BOOKMARK
H PLAY
B/b
ENTER
Press BOOKMARK during playback.
1
Three bookmark placeholders (- - - ) appear
next to the bookmark icon.
Press B/b to select one of the placeholders.
2
3
Play the DVD scene you want, then press
ENTER.
The selected placeholder changes to a number
(1, 2 or 3).
continued
Using bookmarks 67
Download from Www.Somanuals.com. All Manuals Search And Download.
To cancel the bookmark
Press CLEAR after step 3.
To exit the Bookmark menu
Press BOOKMARK.
To playback the scene where you insert a bookmark
Press BOOKMARK during playback.
1
Press B/b to select the bookmark placeholder, then press H PLAY to play the
2 bookmark.
Note
•
Depending on the DVD, you may not be able to use the bookmark function.
68 Using bookmarks
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the sound
When playing a DVD recorded in multiple
audio formats (PCM, Dolby Digital, or
DTS), you can change the audio format. If
the DVD is recorded with multilingual
tracks, you can also change the language.
AUDIO
With CDs, DATA CDs, or VIDEO CDs, you
can select the sound from the right or left
channel and listen to the sound of the
selected channel through both the right and
left speakers. For example, when playing a
disc containing a song with the vocals on the
right channel and the instruments on the left
channel, you can hear the instruments from
both speakers by selecting the left channel.
B/b
Press AUDIO during playback.
1
Press B/b repeatedly to select the desired language/audio setting.
2
• When playing a DVD
Depending on the DVD, the choice of language varies.
abbreviation of the language.
• When playing a VIDEO CD or CD
The default setting is indicated in bold print.
STEREO
Left
The standard stereo sound
The sound of the left channel (monaural)
The sound of the right channel (monaural)
Right
Changing the sound 69
Download from Www.Somanuals.com. All Manuals Search And Download.
Virtual surround setting
When you connect a stereo TV or 2 front
speakers, SURROUND lets you enjoy surround
sound effects by using sound imaging to create
virtual rear speakers from the sound of the front
speakers without using actual rear speakers.
This function is designed to work with the LINE
OUT AUDIO L/R jacks.
SURROUND
Press SURROUND during playback.
1
Press SURROUND repeatedly to select “On.”
2
To cancel the setting
Select “Off” in step 2.
70 Virtual surround setting
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
•
•
•
•
When the playing signal does not contain a signal for the rear speakers, the surround effects
will be difficult to hear.
When you activate the surround effect, turn off the surround setting of the connected TV or
amplifier (receiver).
Make sure that your listening position is between and at an equal distance from your
speakers, and that the speakers are located in similar surroundings.
If you use the DIGITAL AUDIO OUT (OPTICAL or COAXIAL) jack and set “Dolby
Digital” to “Dolby Digital” or “DTS” to “On” in “AUDIO SETUP” menu, sound will come
from your speakers but it will not have the surround effect.
•
Certain audio features of this product manufactured under a license from Desper Products,
Inc. Spatializer®, VBX™ and the circle-in-square device are trademarks owned by Desper
Products, Inc.
Virtual surround setting 71
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing an MP3 audio track
You can play back DATA CDs (CD-ROMs/
CD-Rs/CD-RWs) recorded in MP3 (MPEG1
Audio Layer 3) format.
Z
./ >
H PLAY
V/v/B/b
ENTER
O RETURN
Press Z and place a DATA CD on the disc tray,
then press Z to close the tray.
1
When you load a DATA CD which contains
MP3 audio tracks and JPEG image files,
“Select a Media Type” menu appears.
If you load a DATA CD which contains only
MP3 audio files, the MP3 display appears.
Then you can skip step 2.
Press V/v to select “MP3”, then press ENTER.
2
72 Playing an MP3 audio track
Download from Www.Somanuals.com. All Manuals Search And Download.
Press V/v or ./ > to select the desired track, then press ENTER.
3
The selected track starts playing.
When a track or album is being played, its title is shaded. The playing track
number appears on the display window.
To change the album, press O RETURN.
4
5
Press V/v to select an album, then press
ENTER.
The list of tracks contained in the album
appears.
To select a track, repeat step 2.
To go to the next or previous page
Press b or B.
To return to the previous display
Press O RETURN.
To return to the “Select a Media Type” menu
Press x STOP twice, then press TOP MENU.
To turn off the display
Press x STOP, then press O RETURN repeatedly.
Notes
•
Only the letters in the alphabet and numbers can be used for album or track names. Anything
else is displayed as an asterisk.
•
•
Up to 10 alphanumeric characters can be displayed for album or track names.
ID3 tags cannot be displayed.
continued
Playing an MP3 audio track 73
Download from Www.Somanuals.com. All Manuals Search And Download.
About MP3 audio tracks
You can play MP3 audio tracks on CD-ROMs, CD-Rs, or CD-RWs. However, the
discs must be recorded according to ISO9660 level 1, level 2, or Joliet format for the
player to recognize the tracks.
You can also play discs recorded in Multi Session.
See the instructions of the CD-R/RW device or recording software (not supplied) for
details on the recording format.
To play a Multi Session CD
This player can play Multi Session CDs when an MP3 audio track is located in the
first session. Any subsequent MP3 audio tracks, recorded in the later sessions, can
also be played back. When audio tracks and images in music CD format or video CD
format are recorded in the first session, only the first session will be played back.
Notes
•
If you put the extension “.MP3” to data not in MP3 format, the player cannot recognize the
data properly and will generate a loud noise which could damage your speaker system.
•
•
The player cannot play audio tracks in MP3PRO format.
This player supports MP3 audio tracks recorded with a bit rate of 128 kbps and a sampling
frequency of 44.1 kHz. Attempting to play MP3 audio tracks recorded with different
specifications may result in loud noise, sound skipping or speaker damage.
•
Depending on the disc, playback may take some time to start.
The Playback order of MP3 audio tracks
The playback order of albums and tracks recorded on a DATA CD is as follows.
• Structure of disc contents
Tree 1 Tree 2 Tree 3 Tree 4 Tree 5
album
track
74 Playing an MP3 audio track
Download from Www.Somanuals.com. All Manuals Search And Download.
When you insert a DATA CD and press H PLAY, the numbered tracks are played
sequentially, from 1 through 7. Any sub-albums/tracks contained within a currently
selected album take priority over the next album in the same tree. (Example: C
contains D so 4 is played before 5.)
albums are arranged in the following order: A t B t C t D t F t G.
Albums that do not contain tracks (such as album E) do not appear in the list.
Tips
•
If you add numbers (01, 02, 03, etc.) to the front of the track file names, the tracks will be
played in that order.
•
A disc with many trees takes longer to start playback. Some discs with many trees cannot be
played back.
Notes
•
•
•
Depending on the software you use to create the DATA CD, the playback order may differ
from the illustration above.
The playback order above may not be applicable if there are more than a total of 200 albums
and tracks in the DATA CD.
The player can recognize up to 100 albums (the player will count just albums, including
albums that do not contain MP3 audio tracks). The player will not play any albums beyond
the first 100 albums. Of the first 100 albums, the player will play no more than a combined
total of 200 albums and tracks.
Playing an MP3 audio track 75
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing JPEG image files
You can play JPEG image files on DATA CDs
(CD-ROMs/CD-Rs/CD-RWs).
Z
./ >
H PLAY
V/v/B/b
ENTER
TOP MENU
DISPLAY
Press Z and place a DATA CD on the disc tray,
then press Z to close the tray.
1
When you load a DATA CD which contains
MP3 audio tracks and JPEG image files,
“Select a Media Type” menu appears.
If you load a DATA CD which contains only
JPEG image files, the ALBUM display
appears. Then you can skip step 2.
Press V/v to select “JPEG”, then press
2
ENTER.
The ALBUM display will appears.
To display the total number of JPEG image
files on the disc, press DISPLAY.
DISPLAY
76 Playing JPEG image files
Download from Www.Somanuals.com. All Manuals Search And Download.
Press ./> to select the next/previous
ALBUM page, press V/v/B/b to select an
image in the ALBUM display, then press
H PLAY.
3
4
The TIMER menu appears.
Press B/b to select the desired play speed, then press ENTER.
Slide show starts from the selected image.
To display an image
Press V/v/B/b to select an image in the ALBUM
1 display, then press ENTER.
The selected image number appears in the display
window.
To display the next/previous image, press ./>.
2
To rotate an image
Press V/v/B/b to select an image in the ALBUM
1 display, then press ENTER.
Press B/b to select ROTATE, then press ENTER.
2 Each time you press ENTER, the image turns
clockwise by 90°.
To zoom in an image
Press V/v/B/b to select an image in the ALBUM
1 display, then press ENTER.
Press B/b to select ZOOM, then press ENTER.
2
3
“
” appears.
Press V/v/B/b to move “
” to the position where
you want to zoom in.
Press ENTER repeatedly to change the magnification.
4 Each time you press ENTER, the magnification
changes as shown below.
2× t 4× t 2× t normal magnification
continued
Playing JPEG image files 77
Download from Www.Somanuals.com. All Manuals Search And Download.
To enjoy the Slide show
Press V/v/B/b to select an image in the ALBUM
1 display, then press ENTER.
Press B/b to select SLIDE, then press ENTER.
2 The TIMER menu appears.
Press B/b to select the desired play speed, then press
3 ENTER.
Slide show starts.
To turn on/off the menu in the single image display
Press DISPLAY in the single image display.
To turn on/off the total number of images in the ALBUM display
Press DISPLAY in the ALBUM display.
To return to the ALBUM display
Press DISPLAY to turn on the menu and press B/b to select ALBUM, then press
ENTER. You can also use MENU button to return to the ALBUM display. Press
. repeatedly to return to the first ALBUM page.
To return to the “Select a Media Type” menu
Press x STOP twice, then press TOP MENU.
Notes
•
•
•
Slide show can play in only one direction.
You cannot rotate or zoom in the image during Slide show.
If you select ALBUM in the rotated image display, the images in the ALBUM display will
also be rotated. Correct the rotation in the ROTATE menu.
About JPEG image files
You can play JPEG image files on CD-ROMs, CD-Rs, or CD-RWs. However, the
discs must be recorded according to ISO9660 level 1, level 2, or Joliet format for the
player to recognize the files.
You can also play discs recorded in Multi Session.
See the instructions of the CD-R/RW device or recording software (not supplied) for
details on the recording format.
To play a Multi Session CD
This player can play Multi Session CDs when an JPEG image file is located in the
first session. Any subsequent JPEG image files, recorded in the later sessions, can
also be played back. When audio tracks and images in music CD format or video CD
format are recorded in the first session, only the first session will be played back.
Notes
•
The system can play the extension “.JPG” or “.JPEG.”
• Some CD-Rs or CD-RWs cannot be played on this system depending on file format.
•
•
If you add the extension “.JPG” or “.JPEG” to data not in JPEG format, the display will be
blank.
Depending on the disc or the size of image files, playback may take some time to start.
Tip
If you add numbers (01, 02, 03, etc.) to the front of the file names, the files will be played in
that order.
•
78 Playing JPEG image files
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing VIDEO CDs with “MENU ON/OFF”
Functions
The PBC (Playback control) function allows
you to search and perform other operations
interactively. PBC playback follows a selection
menu displayed on your TV screen.
Number
buttons
The “MENU ON” function is the PBC function.
./>
H PLAY
x STOP
V/v
ENTER
O RETURN
MENU
Press MENU to select “MENU ON.”
1
The menu for your selection appears.
Press V/v to select the item number you want.
You can also use the number buttons to select the item number and track.
2
continued
Playing VIDEO CDs with “MENU ON/OFF” Functions 79
Download from Www.Somanuals.com. All Manuals Search And Download.
Press ENTER.
3
4
Follow the instructions in the menu for interactive operations.
Refer to the instructions supplied with the disc, as the operating procedure
may differ depending on the VIDEO CD.
To return to the menu
Press O RETURN.
To play using “MENU OFF”
Press MENU to select “MENU OFF.”
When “MENU OFF” is selected, the DVD player starts continuous play. You cannot play still
pictures such as a menu.
To return to “MENU ON,” press MENU to select “MENU ON.”
Note
•
Depending on the VIDEO CD, “Press ENTER” in step 3 may appear as “Press SELECT” in
the instructions supplied with the disc. In this case, press H PLAY.
80 Playing VIDEO CDs with “MENU ON/OFF” Functions
Download from Www.Somanuals.com. All Manuals Search And Download.
VCR Additional Operations
Quick Timer Recording
After you have started recording, you can
have the VCR stop recording automatically
after a specified duration.
z REC
x STOP
While recording, press z REC.
1
Press z REC repeatedly to set the duration time.
2
Each press advances the time as follows.
Normal
recording
0:30
1:00
1:30
2:00
2:30
3:00
3:30
4:00
The tape counter decreases minute by minute to 0:00, then the VCR stops
recording.
To extend the duration
Press z REC repeatedly to set a new duration time.
To cancel the duration
Press z REC repeatedly until the indicator disappears and the VCR returns to
normal recording mode.
To stop while recording
Press x STOP.
Note
•
You cannot display the current tape time in the display window when setting the recording
duration time.
Quick Timer Recording 81
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording stereo and bilingual programs
Recording stereo programs
When you receive a program broadcast in stereo, press AUDIO to display “Hi-Fi” on
the TV screen. You can also select “Left,” “Right,” or “Mono.” If there is noise in the
stereo program, select “Mono.” The sound will be recorded in monaural (on both hi-
fi and normal audio tracks) but with less noise.
Recording bilingual programs
Press AUDIO to display “SAP” on the TV screen. When a SAP (Second Audio
Program) is received, “SAP” appears on the TV screen. When MAIN is selected, the
VCR records only the main sound.
Selecting the sound during playback
During playback, press AUDIO to select the sound you want.
To listen to
Stereo
On-screen display
Display window
STEREO indicator
STEREO indicator
STEREO indicator
No indicator
Hi-Fi
Left
Left channel
Right channel
Right
Mono
Monaural sound on the
normal audio track
How sound is recorded on a video tape
The VCR records sound onto two separate tracks. Hi-fi audio is recorded onto the
main track along with the picture. Monaural sound is recorded onto the normal audio
track along the edge of the tape.
Monaural sound
Normal audio track
Hi-fi audio track
(main track)
Stereo sound
(left/right channels)
Notes
•
•
To play a tape in stereo, you must use the A/V connections.
When you play a tape recorded in monaural, the sound is heard in monaural regardless of the
AUDIO setting.
82 Recording stereo and bilingual programs
Download from Www.Somanuals.com. All Manuals Search And Download.
Searching using various functions
The VCR automatically marks the tape with
an index signal at the point where each
recording begins.
SEARCH
MENU
You can easily find a specific point using
various search functions.
H PLAY
V/v/B/b
To search using the index function (Scan and Play)
The VCR automatically marks the tape with an index signal at the point where each
recording begins. Use these signals as references to find a specific recording.
Insert an indexed tape into the VCR.
1
2
Press SEARCH MENU.
Press b to scan ahead, or B to scan backwards.
3
The VCR searches and then plays back for about five
seconds.
Press H PLAY to view that program.
4
If you do not press H PLAY, the VCR automatically searches for the next index
mark, or until it reaches the end of the tape.
continued
Searching using various functions 83
Download from Www.Somanuals.com. All Manuals Search And Download.
To search for the counter 0:00:00 point
To mark a point on the tape that you want to find later, reset the tape counter to
“0:00:00.”
The VCR automatically fast-forwards or rewinds to the 0:00:00 point on the tape
counter.
Press SEARCH MENU.
1
2
Press V.
The VCR starts searching and automatically stops at
the 0:00:00 point.
To search for a blank portion of the tape
The VCR automatically searches for the beginning of a blank portion. You can easily
find a point you can start recording from.
Press SEARCH MENU.
1
2
Press v.
The VCR starts searching and automatically stops at
the beginning of a blank space. If no blank space is
found, the VCR reaches the end.
Note
•
Once in recording mode, if the VCR is put in pause and then released to start the recording,
no index mark will be inserted. An index mark will be inserted if the channel is changed
while VCR is put in pause.
84 Searching using various functions
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the picture (tracking)
Although the VCR automatically adjusts the tracking
when playing a tape, distortion may occur if the
recording is in poor condition. In this case, manually
adjust the tracking.
Press TRACKING +/– to display the tracking meter.
The distortion should disappear as you press one of
the two tracking buttons.
To resume automatic tracking adjustment, eject the
tape and reinsert it.
Tracking meter
Note
•
The auto tracking adjustment cannot be guaranteed to work with tapes recorded in the LP
mode on other VCRs.
Adjusting the picture (tracking) 85
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing menu options
Press SET UP when the DVD player is in stop
1 mode.
Press V/v/B/b to select
Setup), then press ENTER.
(Video Function
2
The “VIDEO FUNCTION SETUP” menu appears.
Press V/v to select the option to change.
Press B/b to change the setting.
3
4
5
Press O RETURN repeatedly to exit the menu.
Menu choices
The default settings are indicated in bold print.
Menu option
Set this option to
Tape Length
• T-120 when using a T-120 or shorter length tape.
•
•
T-160 when using a T-160 length tape.
T-180 when using a T-180 or longer length tape.
Auto Play
• On to start playback automatically, when you insert a tape with
its safety tab removed.
•
•
Off to turn off Auto play. You need to press H PLAY to start
playback, even if you insert a tape with its safety tab removed.
Auto Repeat
On to play back a tape repeatedly. The VCR rewinds a tape to
the beginning and restarts playback automatically.
• Off to turn off Auto repeat.
86 Changing menu options
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing with another VCR
How to connect to record on this VCR
TV
This VCR (Recorder)
LINE-2 IN
Other VCR (Player)
LINE OUT
Audio/video cord (not supplied)
: Signal flow
Notes
•
•
Make sure you connect the plugs to jacks of the same color.
If the other VCR is a monaural type and connected to this VCR’s LINE-2 IN jacks, connect
the audio plug to the AUDIO L (white) jack. The sound is recorded on both right and left
channels. If you connect to the AUDIO R (red) jack, the sound is recorded only on the right
channel.
•
•
If you connected this VCR to both the LINE IN and LINE OUT jacks of the other VCR,
select the input correctly to prevent a humming noise.
You can use the LINE IN 1 jacks for editing. If the other VCR is a monaural type the sound
is recorded only on the channel whose jack is connected to the audio plug. To record on both
right and left channels, connect the audio plugs to the AUDIO L/R jacks using an audio/video
cord (not supplied).
continued
Editing with another VCR 87
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation (when recording on this VCR)
Before you start editing
• Turn on the VCR and the TV and set
it to the video channel.
• Press INPUT SELECT or CH +/– to
display “LINE 1” or “LINE 2” in the
display window.
X PAUSE
z REC
• Press SP/EP to select the tape speed,
SP or EP.
Insert a source tape with its safety tab removed into the other (playback) VCR.
1 Search for the point to start playback and set it to playback pause.
Insert a tape into this (recording) VCR. Search for the point to start recording
2 and press X PAUSE.
Press z REC on this VCR to set it to recording pause.
3
4
To start editing, press the X PAUSE buttons on both VCRs at the same time.
To stop editing
Press the x STOP buttons on both VCRs.
Tip
•
To cut out unwanted scenes while editing, press X PAUSE on this VCR when an unwanted
scene begins. When it ends, press X PAUSE again to resume recording.
88 Editing with another VCR
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
General setup information
Changing setup options
Press SET UP when the DVD player is in stop mode.
1
Press V/v/B/b to select
(Option setup), then
2 press ENTER.
The “OPTION SETUP” menu appears.
Press V/v to select the option to change.
3
4
5
Press B/b to change the setting.
Press O RETURN repeatedly to exit the menu.
If you have changed the RF Output Channel, a confirmation message appears.
Press ENTER to confirm the changed channel.
Menu choices
Initial settings are indicated in bold print.
Menu option
Set this option to
RF Output Channel
• 3CH when using channel 3 to receive the VCR signal.
•
4CH when using channel 4 to receive the VCR signal.
For details, see page 90.
Auto Power Off
•
•
1Hr to turn off the VCR automatically one hour after the last
operation.
2Hr to turn off the VCR automatically two hours after the last
operation.
• Off to set no specific time to turn off.
continued
General setup information 89
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the RF Output channel
When connecting the DVD-VCR to the TV
using only the antenna cable, you must set
the RF Output channel in the “OPTION
SETUP” menu so that the TV can receive the
correct signal from the DVD-VCR.
?/1
CH +/–
TV
TV/VIDEO
?/1
CHANNEL +/–
1 whichever channel is not used in your area. If both are used, set the switch to
either channel.
Press ?/1 to turn on the DVD-VCR.
2
3
4
Press TV/VIDEO to turn on “VCR” in the DVD-VCR’s display window.
Press CH +/– to display a channel number in the display window.
Select an active channel number in your area.
Turn on your TV and set it to the channel you selected in step 1 (3CH or 4CH).
5
The channel you selected in step 4 appears on the TV screen. If the channels
change when you press CH +/–, you have made the correct setting.
Whenever you use the DVD-VCR, set the TV to the channel selected in step 1.
90 General setup information
Download from Www.Somanuals.com. All Manuals Search And Download.
Attaching the external antenna connector
When using a 300-ohm twin lead cable for a
VHF/UHF antenna, use an antenna connector
(not supplied) to connect the antenna to the
DVD-VCR.
300-ohm twin
lead cable
Antenna
connector (not
supplied)
Loosen the screws on the antenna connector.
1
2
3
Wind the twin leads around the screws on the antenna connector.
Retighten the screws.
Attaching a UHF/VHF band mixer
When using both a 75-ohm coaxial cable and
a 300-ohm twin lead cable for a VHF/UHF
antenna, use a UHF/VHF band separator/
mixer (not supplied) to connect the antenna
to the DVD-VCR.
300-ohm twin
lead cable
UHF/VHF
band
separator/
mixer (not
supplied)
75-ohm coaxial
cable
Loosen the screws on the mixer.
1
Wind the twin leads around the screws on the mixer.
2
3
4
Retighten the screws.
Connect the 75-ohm coaxial cable to the mixer.
General setup information 91
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
If you have any questions or problems not covered below, please consult your nearest Sony
dealer. (For customers in USA)
General Troubleshooting
Symptom
Remedy
The ?/1 switch does not function.
•
•
Connect the AC power cord securely.
The power is turned on but the DVD-
VCR does not operate.
Moisture condensation has occurred. Turn the power off,
unplug the AC power cord and leave the DVD-VCR to
dry for over three hours.
The clock has stopped and “--:--”
appears in the display window.
•
The clock stops if the DVD-VCR is disconnected from
the wall outlet. Reset the clock (and timer).
The remote commander does not
function.
•
•
Make sure you are pointing the remote commander at the
remote sensor on the DVD-VCR.
Replace all the batteries in the remote commander with
new ones if they are weak.
•
•
Make sure the TV / DVD·VIDEO switch is set correctly.
Select correctly VIDEO or DVD with the SELECT DVD/
VIDEO button.
The tracking meter does not appear
on the screen.
•
•
The recording condition of the tape is very poor and
tracking cannot be adjusted.
You cannot control other TVs.
Set your TV’s code number. The code number may
change when you replace the batteries of the remote
commander.
92 Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Troubleshooting
Symptom
Remedy
There is no picture/picture noise
appears.
•
•
•
Re-connect the connecting cord securely.
The connecting cords are damaged.
the input selector on your TV so that the signal from the
player appears on the TV screen.
•
•
The disc is dirty or flawed.
If the picture output from your player goes through your
VCR to get to your TV or if you are connected to a
combination TV/VIDEO player, the copy-protection
signal applied to some DVD programs could affect
picture quality. If you still experience problems even
when you connect your player directly to your TV, please
try connecting your player to your TV’s S VIDEO input
•
•
You have set the player to progressive format (the
PROGRESSIVE indicator lights up in blue) eventhough
your TV cannot accept the progressive signal. In this
case, press the PROGRESSIVE button on the front panel
Even if your TV is compatible with progressive format
(480p) signals, the image may be affected when you set
the player to progressive format. In this case, press the
PROGRESSIVE button so that the PROGRESSIVE
indicator turns off and the player is set to normal
•
COMPONENT VIDEO OUT jack is not used or “Video
Out” of the “SCREEN SETUP” menu is not set correctly
while the PROGRESSIVE indicator lights up in blue.
press the PROGRESSIVE button so that the
PROGRESSIVE indicator turns off.
Even though you set the aspect ratio
in “TV Type” of the “SCREEN
SETUP” menu the picture does not
fill the screen.
•
•
The aspect ratio of the disc is fixed on your DVD.
There is no picture from your VCR
connected to the LINE IN jacks.
The DVD player must be in standby mode to view
pictures from your VCR.
There is no sound.
•
•
•
Re-connect the connecting cord securely.
The connecting cord is damaged.
The player is connected to the wrong input jack on the
•
•
•
•
The amplifier (receiver) input is not correctly set.
The player is in pause mode or in Slow-motion Play mode.
The player is in fast forward or fast reverse mode.
If the audio signal does not come through the DIGITAL
AUDIO OUT (OPTICAL or COAXIAL) jack, check the
audio settings (page 48).
Sound is noisy.
•
•
When playing a CD with DTS sound tracks, noise will
come from the LINE OUT L/R (AUDIO) jacks (page 30)
or DIGITAL OUT (OPTICAL or COAXIAL) jack.
The sound volume is low.
The sound volume is low on some DVDs. The sound
volume may improve if you set “Audio DRC” to “TV
continued
Troubleshooting 93
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Remedy
The disc does not play.
•
•
The disc is turned over.
Insert the disc with the playback side facing down on the
disc tray.
•
•
•
•
•
The disc is skewed.
The region code on the DVD does not match the player.
Moisture has condensed inside the player (page 3).
The player cannot play CD-Rs, CD-RWs, or DVD-Rs that
•
•
Make sure the TV / DVD·VIDEO switch is set correctly.
Select correctly VIDEO or DVD with SELECT DVD/
VIDEO button.
The MP3 audio track cannot be
•
The DATA CD is not recorded in the MP3 format that
conforms to ISO9660 Level 1/Level 2 or Joliet.
•
•
The MP3 audio track does not have the extension “.MP3.”
The data is not formatted in MP3 even though it has the
extension “.MP3.”
•
•
The data is not MPEG1 Audio Layer 3 data.
The player cannot play audio tracks in MP3PRO format.
The JPEG image file cannot be
played.
•
•
•
The DATA CD is not recorded in JPEG format that
conforms to ISO9660 Level 1/Level 2 or Joliet.
The JPEG image file does not have the extension “.JPG”
or “.JPEG.”
The data is not formatted in JPEG even though it has the
extension “.JPG” or “JPEG.”
•
•
Length or width of the image is more than 4720 dots.
The title of the MP3 audio album/
track or JPEG image album/file is not
correctly displayed.
The player can only display numbers and alphabet. Other
characters are displayed as asterisks.
The disc does not start playing from
the beginning.
•
Program play, shuffle play, or repeat play, has been
•
•
Resume play has taken effect (page 29).
The player starts playing the disc
automatically.
The disc features an auto playback function.
Playback stops automatically.
•
•
While playing discs with an auto pause signal, the player
stops playback at the auto pause signal.
You cannot perform some functions
such as stop, search, slow-motion
play, repeat play, shuffle play, or
program play.
Depending on the disc, you may not be able to do some
operations. See the operating manual that comes with the
disc.
The language for the sound track
cannot be changed.
•
•
•
Try using the DVD’s menu instead of the direct selection
Multilingual tracks are not recorded on the DVD being
played.
The DVD prohibits the changing of the language for the
sound track.
94 Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Remedy
The subtitle language cannot be
changed or turned off.
•
Try using the DVD’s menu instead of the direct selection
•
Multilingual subtitles are not recorded on the DVD being
played.
•
•
The DVD prohibits the changing of the subtitles.
The angles cannot be changed.
Try using the DVD’s menu instead of the direct selection
•
•
Multi-angles are not recorded on the DVD being played.
The DVD prohibits changing of the angles.
The player does not operate properly.
•
When static electricity, etc., causes the player to operate
abnormally, unplug the player.
VCR Troubleshooting
Symptom
Remedy
The playback picture does not appear
on the TV screen.
•
Make sure the TV is set to the channel for the VCR. If
you are using a monitor, set it to video input.
The picture is not clear.
•
•
Adjust the tracking with the TRACKING +/– buttons.
The video heads are dirty (see the last page of
“Troubleshooting”). Clean the video heads using a Sony
video head cleaning cassette. If a Sony cleaning cassette
is not available in your area, have the heads cleaned at
your nearest Sony dealer (a standard service fee will be
charged). Do not use a commercially available liquid
type cleaning cassette, as it may damage the video heads.
•
•
The video heads may have to be replaced. Consult your
local Sony dealer for more information.
The picture rolls vertically during
picture search.
Adjust the vertical hold control on the TV or monitor.
The picture has no sound.
•
•
The tape is defective.
If you made A/V connections, check the audio cord
connection.
A TV program does not appear on
the TV screen.
•
•
Make sure the TV is set to the channel for the VCR. If
you are using a monitor, set it to video input.
Select the correct source with the INPUT SELECT or
CH +/– buttons. Select a channel number when recording
TV programs; select “L1” or “L2” when recording from
other equipment.
TV reception is poor.
•
•
Adjust the TV antenna.
The tape starts playing as soon as it is
inserted.
The safety tab has been removed. To record on this tape,
cover the tab hole.
The tape is ejected when you press
z REC.
•
•
Check that the safety tab has not been removed.
Nothing happens when you press
Make sure the tape is not at its end.
z REC.
continued
Troubleshooting 95
Download from Www.Somanuals.com. All Manuals Search And Download.
Symptom
Remedy
The timer does not operate.
•
•
•
•
•
•
•
•
Check that the clock is set.
Make sure a tape has been inserted.
Check that the safety tab has not been removed.
Make sure the tape is not at its end.
Make sure a program has been set for timer recording.
Make sure your timer settings are past the current time.
Check that the cable box is turned on.
The clock stops if the DVD-VCR is disconnected from
the wall outlet for more than one minute. Reset the clock
and timer.
•
•
•
Turn the power off and unplug the AC power cord.
A tape cannot be inserted.
Check that a tape is not already in the tape compartment.
The VCR mecanism needs to be
cleaned.
Clean the cabinet, panel and controls with a dry, soft
cloth, or a soft cloth slightly moistened with a mild
detergent solution. Do not use any type of solvent, such
as alcohol or benzine.
Control by AV mouse is not possible.
•
The unit is not compatible with satellite TV receiver AV
mouse, etc.
Symptoms caused by contaminated video heads
• Normal picture
• Rough picture
• Unclear picture
• No picture (or
black & white
screen appears)
initial
terminal
contamination
96 Troubleshooting
Download from Www.Somanuals.com. All Manuals Search And Download.
Glossary
Sections of a picture or a music feature that are smaller than titles. A title is composed of
several chapters. Depending on the disc, no chapters may be recorded.
Digital audio compression technology developed by Dolby Laboratories. This technology
conforms to 5.1-channel surround sound. The rear channel is stereo and there is a discrete
subwoofer channel in this format. Dolby Digital provides the same 5.1 discrete channels of
high quality digital audio found in Dolby Digital cinema audio systems. Good channel
separation is realized because all of the channel data are recorded discretely and little
deterioration is realized because all channel data processing is digital.
Dolby Surround (Pro Logic) (page 44)
Audio signal processing technology that Dolby Laboratories developed for surround sound.
When the input signal contains a surround component, the Pro Logic process outputs the front,
center and rear signals. The rear channel is monaural.
Digital audio compression technology that Digital Theater Systems, Inc. developed. This
technology conforms to 5.1-channel surround sound. The rear channel is stereo and there is a
discrete subwoofer channel in this format. DTS provides the same 5.1 discrete channels of high
quality digital audio.
Good channel separation is realized because all of the channel data is recorded discretely and
little deterioration is realized because all channel data processing is digital.
DVD (page 6)
A disc that contains up to 8 hours of moving pictures even though its diameter is the same as a
CD.
The data capacity of a single-layer and single-sided DVD is 4.7 GB (Giga Byte), which is 7
times that of a CD. The data capacity of a double-layer and single-sided DVD is 8.5 GB, a
single-layer and double-sided DVD is 9.4 GB, and double-layer and double-sided DVD is
17GB.
The picture data uses the MPEG 2 format, one of the worldwide standards of digital
compression technology. The picture data is compressed to about 1/40 (average) of its original
size. The DVD also uses a variable rate coding technology that changes the data to be allocated
according to the status of the picture. Audio information is recorded in a multi-channel format,
such as Dolby Digital, allowing you to enjoy a more real audio presence.
Furthermore, various advanced functions such as the multi-angle, multilingual, and Parental
Control functions are provided with the DVD.
DVD-RW (page 6)
A DVD-RW is a recordable and rewritable disc that is the same size as a DVD VIDEO. The
DVD-RW has two different modes: VR mode and Video mode. DVD-RWs created in Video
mode have the same format as a DVD VIDEO, while discs created in VR (Video Recording)
mode allow the contents to be programmed or edited.
continued
Glossary 97
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD+RW (page 6)
A DVD+RW (plus RW) is a recordable and rewritable disc. DVD+RWs use a recording format
that is comparable to the DVD VIDEO format.
Interlace format (page 53)
Interlace format shows every other line of an image as a single “field” and is the standard
method for displaying images on television. The even number field shows the even numbered
lines of an image, and the odd numbered field shows the odd numbered lines of an image.
Progressive format (page 47 and 53)
Compared to the Interlace format that alternately shows every other line of an image (field) to
create one frame, the Progressive format shows the entire image at once as a single frame. This
means that while the Interlace format can show 30 frames/60 fields in one second, the
Progressive format can show 60 frames in one second. The overall picture quality increases and
still images, text, and horizontal lines appear sharper. This player is compatible with the 480
progressive format.
Title (page 31)
The longest section of a picture or music feature on a DVD, movie, etc., in video software, or
the entire album in audio software.
Track (page 31)
Sections of a picture or a music feature on a CD or VIDEO CD (the length of a song).
98 Glossary
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
System
Inputs and outputs
Laser
LINE IN 1 and LINE-2 IN
Semiconductor laser
Format
VHS NTSC standard
Video recording system
Rotary head helical scanning FM system
Video heads
VIDEO IN, phono jack (1 each)
Input signal: 1 Vp-p, 75 ohms, unbalanced, sync
negative
AUDIO IN, phono jacks (2 each)
Input level: 327 mVrms
Input impedance: more than 47 kilohms
LINE OUT
Double azimuth four heads
Video signal
VIDEO OUT, phono jack (1)
Output signal: 1 Vp-p, 75 ohms, unbalanced, sync
negative
NTSC color, EIA standards
Tape speed
AUDIO OUT, phono jacks (2)
Standard output: 327 mVrms
Load impedance: 47 kilohms
Output impedance: less than 10 kilohms
DIGITAL OUT
3
SP: 33.35 mm/s (1
inches/s)
8
EP: 11.12 mm/s ( 7 inches/s)
16
LP: 16.67 mm/s ( 11 inches/s),
16
playback only
Maximum recording/playback time
8 hrs. in EP mode (with T-160 tape)
Rewind time
OPTICAL, Optical output jack
–18 dBm (wave length: 660 nm)
COAXIAL, phono jack
Approx. 1 min (with T-120 tape)
Output signal: 0.5 Vp-p, 75 ohms
COMPONENT VIDEO OUT (Y, Pb, Pr)
Phono jack
Tuner section
Channel coverage
Y: 1.0 Vp-p/Pb, Pr: 0.7 Vp-p, 75 ohms
S-VIDEO OUT
VHF 2 to 13
UHF 14 to 69
4-pin, mini-DIN jack
CATV A-8 to A-1, A to W, W+1 to W+84
Antenna
Y: 1.0 Vp-p, unbalanced, sync negative
C: 0.286 Vp-p, load impedance 75 ohms
75-ohm antenna terminal for VHF/UHF
Timer section
Clock
Quartz locked
Timer indication
12-hour cycle
Timer setting
8 programs (max.)
continued
Specifications 99
Download from Www.Somanuals.com. All Manuals Search And Download.
General
Power requirements
120 V AC, 60 Hz
Power consumption
28 W
Power back-up
Back-up duration: 0 min
Operating temperature
0°C to 45°C (32°F to 113°F)
Storage temperature
–20°C to 60°C (–4°F to 140°F)
Operating humidity
25% to 80%
Dimensions including projecting parts and controls
(w/h/d)
Approx. 430 × 95 × 295 mm
(Approx. 17 × 3.7 × 12 inches)
Mass
Approx. 4.0 kg (Approx. 8.8 lbs)
Supplied accessories
Remote commander (1)
Size AA (R6) batteries (2)
75-ohm coaxial cable with F-type connectors (1)
Audio/video cord (pinplug ×3 y pinplug ×3) (1)
Design and specifications are subject to change without
notice.
100 Specifications
Download from Www.Somanuals.com. All Manuals Search And Download.
Display window
H Playing time/clock/current status
indicator (29)
102 Index to parts and controls
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear panel
DVD player and VCR
DVD player only
G COMPONENT VIDEO OUT Pr/Pb/Y
jacks (47)
J DIGITAL AUDIO OUT/COAXIAL jack
continued
Index to parts and controls 103
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote commander
[for DVD] (open/close) button
[for VIDEO] (eject) button
[for DVD] SUBTITLE button
[for VIDEO] TIMER button
J BOOKMARK/SEARCH MENU button
[for DVD] BOOKMARK button
[for VIDEO] SEARCH MENU button
[for DVD] REPEAT button
[for VIDEO] REPLAY button
∗ Number 5, AUDIO and H PLAY buttons have
a tactile dot. Use the tactile dot as a reference
when operating the DVD-VCR.
104 Index to parts and controls
Download from Www.Somanuals.com. All Manuals Search And Download.
S CH (channel)/TRACKING +/– buttons*1
U ENTER button*2 (19)
[for DVD] ZOOM button
[for VIDEO] No function
[for Sony TV only] MUTING button
W SP (Standard Play)/EP (Extended Play)
button (37)
[for DVD] m SCAN button
M SCAN button
SLOW y button
[for VIDEO] m (rewind) button
M (fast-forward) button
SLOW y button
wk ./> SHUTTLE PREV/NEXT
[for DVD] .PREV (previous) button
> NEXT (next) button
[for VIDEO] ./> SHUTTLE
button
ea ENTER button*2 (19)
1
*
*
CH/TRACKING + button has a tactile dot.
Use the tactile dot as a reference.
The ENTER buttons 21 and 31 can be used
interchangeably.
2
Index to parts and controls 105
Download from Www.Somanuals.com. All Manuals Search And Download.
DVD Audio/Subtitle Language
Abbreviation
ARA
CHI
Language
Arabic
Chinese
Croatian
Czech
CRO
CZK
DAN
DEU
ENG
ESP
Danish
German
English
Spanish
Finish
FIN
FRA
GRE
HUN
IDN
French
Greek
Hungarian
Indonesian
Hindi
IND
ISL
Islandic
Italian
ITA
IWR
JPN
Hebrew
Japanese
Korean
KOR
MAL
NLD
NOR
POL
POR
RUS
SVE
THA
TUR
VIE
Malay
Dutch
Norwegian
Polish
Portuguese
Russian
Swedish
Thai
Turquish
Vietnamese
Afrikaans
ZAF
106 DVD Audio/Subtitle Language
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Numerics
J
S
16:9 52
Safety tab 38
4:3 Letter Box 52
4:3 Pan Scan 52
SAP (Second Audio Program)
Searching
for a blank portion 84
for the counter 0 point 84
Scan and Play 83
Shuffle play 65
SP mode 37
L
Language selecting 19
LP mode 38
A
Adjusting
picture 85
tracking 85
Angle 61
Antenna hookup 14
Audio track 82
Audio/video (A/V) hookup 13
Auto Clock Set 20
M
Monaural 82
Monitoring audio during
playback 82
STEREO 69
Stereo 82
Subtitle 62
N
Normal audio track 82
T
B
Timer setting
Bookmark 67
P
daily/weekly recording 41
Adjusting
Parental Control 56
PBC (Playback control) 79
Picture adjustment 85
Playback 28
C
Cable hookup 12
Changing menu option 86
Cleaning the video heads 95
Clock setting 20
Commercial Skip 34
Connecting
U
MP3 audio track 72
program play 63
repeat play 66
selecting the sound 82
shuffle play 65
skip 34
VIDEO CDs 79
Usable discs 6
V
VIDEO CD 6
Cable TV 18
external antenna connector
Z
UHF/VHF band mixer 91
Counter 35
Zoom 60
D
Presetting channels 24
Program play 63
Disabling channels 26
DVD 6
R
Recording
bilingual programs 82
SAP broadcasts 82
saving 38
E
Editing 87
EP mode 37
stereo broadcasts 82
while watching another
program 38, 41
Repeat play 66
H
RF channel 90
Handling discs 7
Hi-fi audio track 82
Index 107
Download from Www.Somanuals.com. All Manuals Search And Download.
Sony Corporation Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
AK68-00158F
|