IT
2-188-006-11 (1)
7819900908
DVD/CD
Rewritable Drive
Operating Instructions
JP
FR
DE
ES
IT
CS
DRX-710UL
© 2004 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
CE Sicherheitsbestimmungen
Diese Ausrüstung erfüllt die Europäischen EMC-Bestimmungen für die Verwendung in
folgender / folgenden Umgebung(en):
• Wohngegenden
• Gewerbegebiete
• Leichtindustriegebiete
(Diese Ausrüstung erfüllt die Bestimmungen der Norm EN55022, Klasse B.)
CAUTION
The mains plug on this equipment must be used to disconnect mains power.
Please ensure that the socket outlet is installed near the equipment and shall be easily
Accessible.
Achtung
Zur Trennung vom Netz ist der Netzsecker aus der Steckdose zu ziehen, welche sich in der
Nähe des Gerätes befinden muß und leicht zugänlich sein soll.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Displaying the contents of CDs
Using Generic Software with the
Precautions when Writing Data to
Reaching the Highest Possible Data
Using 48x Reading Speed
4
Download from Www.Somanuals.com. All Manuals Search And Download.
•
is a trademark of Sony Corporation.
• Pentium is a registrated trademark of Intel Corporation.
• Microsoft, MS, MS-DOS and Windows are registered trademarks of Microsoft Corporation.
• Other system and product names used herein are registered trademarks or trademarks of their
respective manufacturers, although the ™ and ® marks are not used in the text.
❑ Our product warranty is valid only when the supplied accessories (including software) are
used in the specified or recommended system environment, in accordance with the
documentation, and applies only to this DVD/CD rewritable drive. Our customer service
and user support apply only under these product warranty conditions.
❑ Please note that we cannot accept responsibility for failure of the computer or other
devices, incompatibility with special hardware, operating problems caused by improper
installation of software, loss of data, discs or other accidental or incidental damage that
might occur when using this product.
❑ The guarantee and user support for this product are valid only within the countries or sales
regions specified on the warranty card.
❑ Copyright laws prohibit the copying in part or in full of the supplied software and
documentation, or loaning the software, without obtaining permission of the copyright
holder.
❑ We cannot accept responsibility for any direct or indirect financial damage or loss of profit
that might occur when using the supplied software.
❑ The supplied software can only be used with this product.
❑ Specifications of the supplied software may be changed without notice in the interest of
product improvement.
Please Record Responsibly
Before copying anything onto a disc, please be sure that you are not violating copyright
laws. Most software companies allow you to make a backup or archive copy of software.
Check your software’s license agreement for details.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
B Introduction
Unpacking the
Features
Package Contents
This product offers the following features.
Please verify that the package contains the
following when unpacking.
If any of these items appear to be missing
❑ An external DVD/CD RW drive with
i.LINK (IEEE1394) and Hi-Speed USB
(USB 2.0-compliant) interfaces for
computers.
and/or damaged, please contact your dealer.
❑ Can be used horizontally or vertically.
❑ The drive can write to DVD+R
• Drive
Double Layer discs.
❑ You can write at a maximum of 16x
when using high speed DVD+R discs.
❑ The drive can write to seven types of
disc.
❑ Features the
• i.LINK cable (6-pin to 4-pin) ×1
technology to prevent buffer underrun
errors.
• Hi-Speed USB cable ×1
• Quick start guide
• Operating instructions
(this document)
• AC power cord
• AC adaptor (MPA-AC1)
• Software Quick Start Guide
• Software disc
• Stand
• Warranty card
Note
Make sure that you back up the supplied software
disc on another disc because the software disc is
not distributed independently.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
System
Requirements
• You must use discs that are compatible with the
write speed you have selected.
• Writing speed may automatically be adjusted
depending on the disc, specified disc speed, or
disc conditions such as weight imbalance and
eccentricity.
The drive should be used with a system that
meets the following requirements1).
• System meeting the following requirements is
needed in order to use USB 2.0 operation with
this device.
− Hi-Speed USB (USB 2.0-compliant)
interface cable (included).
❑ PC/AT-compatible computer
❑ CPU: Pentium III, 800 MHz or higher
(with Nero Vision Express: Pentium 4,
1.6 GHz recommended)
❑ RAM: 256 MB or higher
❑ 1 GB (with Nero Vision Express:
10 GB) free hard disk space
❑ Operating system:
− System equipped with a Hi-Speed USB (USB
2.0-compliant) connector or PCI adapter
card, and running the USB 2.0 EHCI device
driver1).
1)
The USB 2.0 EHCI driver software is
supplied with currently available PCI
adapter cards that conform to USB 2.0.
Further, Microsoft has released the USB
2.0 EHCI driver software for Windows
XP, therefore it is also possible to use this
driver software with Windows XP.
For details, contact your USB 2.0 adapter
dealer or consult the Microsoft
Windows 2000 Professional
(referred to as Windows 2000),
Windows XP Home Edition or
Windows XP Professional
(referred to as Windows XP)
❑ i.LINK or USB connector
Corporation Web site.
• When connected to a product that does not
support Hi-Speed USB, the maximum transfer
rate is limited to 12 Mbps (equivalent to a USB
1.1 transfer rate).
• You cannot use the i.LINK and USB interfaces
simultaneously.
1)
The above requirements are the minimum
necessary requirements to write to disc
normally. Under actual operating conditions,
the requirements imposed by your software
must also be met. For details, refer to your
software documentation.
Incompatible Sony VAIO
computers
Regardless of the version of Windows they
are running, the following models of VAIO
computers are incompatible with the DRX-
710UL when connected through an i.LINK
cable.
Products for USA:
PCG-F360, PCG-F350, PCG-F340,
PCG-Z505R, PCG-Z505RX
Products for Europe: PCG-F304, PCG-F305
Products for Japan:
PCG-F34/BP, PCG-Z505JL, PCG-Z505J/BP,
PCG-Z505JX
7
Download from Www.Somanuals.com. All Manuals Search And Download.
A Busy indicator
D Power Switch
Indicates the drive status.
Lit (green) :
Press to turn the drive on or off.
(With some models, the power switch is
located on the front panel.)
The power is on.
Lit (orange):
E USB Connector
The drive is reading data,
playing a music CD, or
writing data (packet writing).
Blinking (orange):
Used with a USB cable to connect the
drive to a computer or another USB
device.
The drive is writing data
(disc-at-once or track-at-
once).
F i.LINK S400 Connector (6-pin)
Used with an i.LINK cable to connect
the drive to a computer or another
i.LINK device.
Off:
The power is off.
B Eject button
G i.LINK S400 Connector (4-pin)
Press to open and close the disc tray.
Used with an i.LINK cable to connect
the drive to a computer or another
i.LINK device.
C Disk tray
Insert discs here, label side up.
Hint
H DC IN Jack
When you insert a disc into the drive, make
sure that it is under the four pins. When using
the drive vertically, make sure that you set the
disc inside the two lower pins.
Connect the supplied AC power cord to
the AC power adapter. Connect this
assembly to the DC IN jack, and then
connect the whole to the AC outlet.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
B Setup
Placing the Drive
Using the Drive Vertically
Attach the supplied stand as illustrated below to use the drive vertically.
Position the drive so that the stand straddles the two anti-vibration pads on the
drive bottom and then press it into place.
Using the Drive Horizontally
Place the drive as illustrated below to use the drive horizontally.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection through i.LINK
Note
This product including bundled software functions properly under Windows XP, Windows
2000.
It may not fulfill all functional and performance specification under other OS (operating
system) environment.
Before Connection
• Refer to the list of contents to verify that the package contents are complete.
• If your computer is not equipped with an i.LINK connector, install an i.LINK
interface card.
• Check the type of i.LINK connector provided with your computer's i.LINK
interface and obtain a compatible i.LINK cable. This drive uses a 6-pin
i.LINK connector.
i.LINK S400 connector (4-pin)
i.LINK S400 connector (6-pin)
• Have the manual for your computer handy.
• If you connect the drive to a computer with multiple i.LINK connectors, see
Installation
These instructions apply to most commonly used computers.
CAUTION
• Avoid touching any exposed electronic conductors or contacts on the circuit boards of the
drive or within the computer. These parts can be damaged by electrostatic discharges from
your body.
• Before making connections, touch the metal chassis of your computer to discharge any
static electricity from your body.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Start your computer.
2 Connect the necessary cables, then turn on the drive.
• Connect the i.LINK cable to the 6-pin i.LINK connector on the drive.
− For a computer's 4-pin i.LINK connector : connect to the 6-pin i.LINK
connector on the drive.
− For a computer's 6-pin i.LINK connector : connect to the 4-pin i.LINK
connector on the drive.
• Connect the supplied AC power cord to the supplied AC adapter. Then
connect the AC adapter to the drive's DC IN jack, and connect the power cord
to the power outlet.
Power Switch
i.LINK Cable
4-pin
6-pin
or
4-pin
6-pin
AC adapter
AC power cord
Hints
• The i.LINK cable may be connected to either of the two i.LINK connectors on the back
of the drive.
• For more information about the serial (daisy chain) connection of i.LINK devices, see
12
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Connect the other end of the i.LINK cable to your computer.
Note
We recommend that you connect the drive directly to your computer's i.LINK connector.
4 When the computer is ready, confirm that the drive is detected.
On your desktop, double-click [My Computer] and confirm that a drive icon
has been added.
5 Insert the supplied software disc into the DVD/CD RW drive and
install the software.
Refer to the Software Quick Start Guide for details.
Disconnection
The disconnection procedure varies according to your operating system.
Windows 2000
When your computer successfully detects the drive,
appears on the
Windows taskbar. When you want to disconnect the drive, you must first stop
it using this icon.
1 Click
on the taskbar, and click [Stop IEEE 1394 CD-ROM
drive (E:)] on the shortcut menu.
The “ ‘ IEEE 1394 CD-ROM E:’ device can now be safely removed from the
system” message appears.
2 Click [OK] to close the message.
Now you are ready to disconnect the drive.
3 Disconnect the i.LINK cable.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Windows XP
With Windows XP, first confirm that there are no programs running and that
the drive's busy indicator is not lit, and then disconnect the i.LINK cable.
Note
If you disconnect the i.LINK cable without performing the procedure outlined above with
Windows 2000, the operation of your computer may become erratic or data damaged. Be sure
to perform the procedure above before disconnecting the i.LINK cable.
About i.LINK
This section explains the specifications and features of i.LINK.
Restrictions that are not outlined below may apply, depending on the features
and specifications of individual device
What is i.LINK?
i.LINK is a digital serial interface that provides bi-directional communication
of digital video and audio data between devices that are equipped with i.LINK
connectors, or that allows one device equipped with an i.LINK connector to
control another device that is similarly equipped.
Two i.LINK devices are connected by means of a single i.LINK cable. Using
i.LINK, a wide variety of audio-visual devices can be connected for control or
data exchange. Use of i.LINK is expected to expand to a wider variety of
devices in the future, providing even more options for control and data
exchange.
When multiple i.LINK devices are connected in series, control and data
exchange can be extended to devices that are connected via other i.LINK
devices, as well as to those connected directly. This means that devices can be
connected in any sequence. However, whether or not data can be exchanged
with a particular device, as well as how or if that device can be controlled
depends on the characteristics and specifications of the individual device.
Hints
• i.LINK, the internationally popular name for the IEEE1394 interface standard, is a Sony
trademark.
IEEE1394 is an international standard established by the Institute of Electrical and
Electronics Engineers.
• Digital copyright protection is incorporated in i.LINK devices with built-in author rights
protection.
Use of this technology is authorized by the DTLA (Digital Transmission Licensing
Administrator), the organization controlling digitally-transmitted content protection
technology.
When audio/video data is protected using DTLA copy protection, digital copying may not
be possible between i.LINK devices.
Further, exchange of protected audio/video data may not be possible between i.LINK
devices that are equipped with DTLA copy protection technology and those that are not
equipped with such technology.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Using i.LINK
i.LINK devices are connected in series using i.LINK cables. This is sometimes
referred to as “daisy chain” connection.
i.LINK cable
i.LINK
device
i.LINK
device
i.LINK
device
i.LINK
device
i.LINK
device
Data exchange and control are possible even when two i.LINK devices are
connected through another device.
Branching also possible
• With devices that have 3 or more i.LINK connectors, it is possible to create
branches mid-way through the i.LINK device chain.
• Up to 63 i.LINK devices (including this drive) can be connected together.
However, only 17 devices can be present on the longest individual path. (Up
to 16 i.LINK cables can be used in the chain making up a path of the
maximum possible length.)
The length of a path is indicated in terms of the number of i.LINK cables used,
with each cable counted as one “hop.” For example, in the figure below, the
path between A and C is 6 hops, while that between A and D is 3 hops.
In any of paths A->B, A->C, A->D, B->C, B->D, and C->D, the maximum number
of devices that can be connected is 17. (A maximum of 16 hops.)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Care must be taken to ensure that no path loops back on itself.
The digital signal passes through all the connected i.LINK cables. Circular
cable connections must be avoided to prevent signals from returning to the
device from which they originated. Such circular connections are referred to as
“loops.”
Example of correct connection
Exampleof looped connection
Notes
• Some i.LINK devices, such as computers, must be turned on to relay data between other
i.LINK devices. When connecting an i.LINK device, be sure to refer to the instructions that
are provided with that device.
• The maximum data transfer rate that is supported by any given i.LINK device is indicated
by markings in the vicinity of the i.LINK connector. The maximum i.LINK data transfer
rates are defined as approximately 100, 200, and 400 Mbps, which are respectively denoted
as S100, S200, and S400. When devices having different maximum data transfer rates are
connected together, rates achieved by individual devices may be less than their rated
maximums.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection through USB
Note
• This product including bundled software functions properly under Windows XP and
Windows 2000.
It may not fulfill all functional and performance specification under other OS (operating
system) environment.
Before Connection
• Refer to the list of contents to verify that the package contents are complete.
• If your computer is not equipped with a USB connector, install a USB
interface card.
• Have the manual for your computer handy.
Installation
These instructions apply to most commonly used computers.
1 Start your computer.
2 Connect the necessary cables, then turn on the drive.
• Connect the USB cable to the drive's USB connector.
• Connect the supplied AC power cord to the supplied AC adapter. Then
connect the AC adapter to the drive's DC IN jack, and connect the power cord
to the power outlet.
USB Cable
Power Switch
AC adapter
AC power cord
17
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Connect the other end of the USB cable to your computer.
Note
Connect the drive to a USB connector on the computer.
4 When the computer is ready, confirm that the drive is detected.
On your desktop, double-click [My Computer] and confirm that a drive icon
has been added.
5 Insert the supplied software disc into the DVD/CD RW drive and
install the software.
Refer to the Software Quick Start Guide for details.
Disconnection
The disconnection procedure varies according to your operating system.
Windows 2000
When your computer successfully detects the drive,
appears on the
Windows taskbar. When you want to disconnect the drive, you must first stop
it using this icon.
1 Click
on the taskbar, and click [Stop USB CD-ROM drive
(E:)] on the shortcut menu.
The “ ‘USB CD-ROM E:’ device can now be safely removed from the system”
message appears.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
2 Click [OK] to close the message.
Now you are ready to disconnect the drive.
3 Disconnect the USB cable.
Windows XP
With Windows XP, first confirm that there are no programs running and that
the drive’s busy indicator is not lit, and then disconnect the USB cable.
Note
If you disconnect the USB cable without performing the procedure outlined above with
Windows 2000, the operation of your computer may become erratic or data damaged. Be sure
to perform the procedure above before disconnecting the USB cable.
About Hi-Speed USB (USB 2.0-compliant)
This device supports USB 2.0, which provides a much higher rate of data
transfer than the earlier USB 1.1 standard.
Connecting this device to a computer that is equipped with a USB 2.0-
compliant USB connector or PCI adapter card provides fullest possible drive
reading performance and enables high-speed data transfer. 1)
1) When connected to a product that does not support Hi-Speed USB, the maximum transfer
rate is limited to 1.5 MB/s (equivalent to a USB 1.1 transfer rate).
A system meeting the following requirements is needed in order to use Hi-
Speed USB (USB 2.0-compliant) with this device.
• Hi-Speed USB (USB 2.0-compliant) interface cable (supplied with the
drive).
• System equipped with a Hi-Speed USB (USB 2.0-compliant) connector or
PCI adapter card, and running the USB 2.0 EHCI device driver 2)
.
2) The USB 2.0 EHCI driver software is supplied with currently available PCI adapter cards
that conform to USB 2.0. Further, Microsoft has released the USB 2.0 EHCI driver
software for Windows XP, therefore it is also possible to use this driver software with
Windows XP. 3)
3) For details, contact your USB 2.0 adapter dealer or consult the Microsoft Corporation Web
site.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
B Operation
Using the Drive
Use the supplied software to create discs and play back DVDs. Refer to the
documentation of each software for details about their operation.
Supplied Software
The supplied software disc contains the following software.
Nero StartSmart
Nero StartSmart serves as the command center to quickly start all the software
of the Nero 6 suite.
Nero Burning ROM 6 SE
Nero Burning ROM is the CD and DVD writing software.
Nero Express
A light version of the Nero Burning ROM software. Makes it even easier job
to create CDs and DVDs.
Nero BackItUp
Nero BackItUp is software that allows you to back up the data on your hard
disk to the hard disk, DVD+R/RW, DVD-R/RW, or CD-R/RW discs.
InCD 4
InCD 4 is a packet writing software. It supports writing to DVD+RW,
DVD-RW, and CD-RW.
NeroVision Express 2
DVD-Video and video CD authoring software.
Nero ShowTime
DVD-Video and video CD playback software.
Nero Wave Editor 2
Audio processing software that allows you to modify and such audio files as
WAV, MP3, and WMA.
Nero Cover Designer
CD and DVD cover and label creation software.
Nero Toolkit
The utilities of Nero Toolkit provide information about the system and more.
Nero CD-DVD Speed tests the speed of the existing drives. Nero DriveSpeed
adjusts the write speed to minimize drive noise. Nero InfoTool provides the
main characteristics of drives, the discs they contain, and the installed
software.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Using Generic Software with the Drive
Using software other than the supplied software (such as generic software,
shareware, or freeware) to write data to disc with this drive is not under
warranty and Sony offers no customer service if problems arise from using
such software.
Make sure that the supplied writing software and generic writing software do
not coexist on your computer. Taking appropriate steps to avoid this situation,
especially in the case of packet writing software1) will help prevent erratic
operation of the software and/or computer.
If the generic software you are using does not detect the drive correctly, visit
the Web site of the software manufacturer and update the software, as this may
solve the problem.
1)
Such as Roxio’s Drag-to-Disc, BHA’s B’s CLIP, and Sonic’s DLA.
Displaying the contents of CDs and DVDs
Depending on the disc that you insert into the drive, playback may start, or you
may have to double-click its icon in the [My Computer] window to display a
list of the files and folders it contains.
Hint
You can also right-click the drive icon in the [My Computer] window, and then click [Open]
on the shortcut menu that appears to display the contents of the disc in the drive.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Compatible Discs
The following discs are compatible with the drive.
DVD
1)
Disc types
Logo
Read Write
Write speed
DVD+R
1× to 16×
DVD+R DL
(Double layer)
1× to 2.4×
1× to 4×
1× to 8×
1× to 4×
DVD+RW
DVD-R
DVD-RW
DVD-ROM
DVD-Video
—
—
—
—
1)
Writing speed supported by the drive. Depending on your software and media, this speed
may vary.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
CD
Disc types
Logo
Read Write
Write speed
CD-R
Speed supported by the disc
(max. 48×)
CD-RW
Speed supported by the disc
(max. 4×)
CD-RW
(High Speed)
Speed supported by the disc
(max. 10×)
CD-RW
(Ultra Speed)
Speed supported by the disc
(max. 24×)
CD-ROM
—
—
—
—
—
—
—
—
—
—
CD-DA
(audio only)
CD Extra
Video CD
CD TEXT
Disc diameters
Read
Write
12 cm
8 cm
DVD
—
12 cm
8 cm
CD
Notes
• Only round discs should be used with this drive. Attempting to read odd-shaped discs
(stars, hearts, card shape, etc.) may damage the drive.
• Operation is not guaranteed when writing to or playing back 99 minute discs.
• With 8 cm discs, you must place the drive horizontally.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Recommended Writable Discs
We recommend that you only use discs for which operation has been
guaranteed. You can obtain the latest list of writable discs for which operation
with this drive has been guaranteed at the user support Web site address (see
page 34 for details).
User support Web site
Insert the supplied software disc into the drive, and in the [Menu Selection]
screen, click [User Support Web Page]. You can also directly type the user
Web browser.
Note
You can safely use most disc formats that comply to the appropriate standards with this drive.
However, bear in mind that some generic discs do not comply to quality or performance
standards necessary for safe use with this drive. If you use such discs, the drive may
automatically adjust the writing speed, writing errors may occur, and discs that have been
written to may generate reading errors, etc.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Writable Disc Features
You can use a variety of discs with the drive to write data. Refer to the table
below to find the type of disc that matches what you want to do.
DVD+R
DVD+R DL
DVD+RW DVD-R DVD-RW CD-R CD-RW
Want to create DVD-
Video that can be
played back by most
drives and/or players
Want to create DVDs
that you can modify
Want to create DVDs
to which you can add
to later.
Want to create video
CDs that can be played
back with most
computers
Want to use DVDs as
you would video tapes
(allowing multiple
rewrites)
Want to share 700 MB
of data or more
(Want to create DVD-
ROM discs)
Want to share data that
can be used on most
computers (Want to
create CD-ROM discs)
Want to create audio
CDs that be played
back by most CD
players
Want to back up your
hard disk
Want to store data
without deleting it
Want to use discs as
floppy disks
Note
You can access/play back the data written to the discs above with most drives/players that
support their formats. However, some combinations of drives/players and discs (depending
on their quality and/or characteristics) may make access/playback impossible. For details,
refer to your drive/player documentation.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
CD-R and CD-RW Discs
The DVD/CD RW drive can write to CD-R and CD-RW discs, when used with
writing software. The ability of another model of CD-ROM drive to play (or
read data) written by the DVD/CD RW drive depends on having the
appropriate software settings when writing to the disc.
CD-R Discs
Data can be written to this type of disc only once, and once it has been written,
it cannot be erased. Music CDs created on CD-R disc media can be played in
a common CD player.
CD-RW Discs
Data can be written to and erased from this type of disc repeatedly. Typically,
a new CD-RW disc can be rewritten about 1,000 times.
Music CDs created on CD-RW disc media cannot be played in a CD player
unless it is specifically designed to be CD-RW compatible.
High Speed CD-RW Discs
The drive can write to High Speed CD-RW disc media. Data written on High
Speed CD-RW discs can be read by common CD-ROM drives other than the
drive.
Note
Drives that do not have the High Speed CD-RW logo cannot be used to write to High Speed
CD-RW discs. When writing or appending to such discs with a drive other than this one, be
sure that the drive has the High Speed CD-RW logo. Also, always set the writing speed to
that specified for the particular High Speed CD-RW disc media being used.
Ultra Speed CD-RW Discs
The drive can write to High Speed CD-RW and Ultra Speed CD-RW disc
media. Data written to these discs can be read by common CD-ROM drives
other than the drive.
Note
Drives that do not have the Ultra Speed CD-RW logo cannot be used to write to Ultra Speed
CD-RW discs. When writing or appending to such discs with a drive other than this one, be
sure that the drive has the Ultra Speed CD-RW logo. Also, always set the writing speed to
that specified for the particular Ultra Speed CD-RW disc media being used.
Writing Speed
When writing to CD-R and CD-RW discs, set the writing speed specified on
the disc. Changing the writing speed is done through the writing software.
Reading Discs
CD-R and CD-RW discs created with the DVD/CD RW drive can be read on
most CD-ROM drives. However, some older CD-ROM drives cannot read
CD-RW discs.
Also, CD-R music discs created and finalized with the DVD/CD RW drive can
be played in most CD players, but playback cannot be guaranteed for all CD
players or automobile CD players.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Also, depending on the particular drive-disc combination, some CD-R and
CD-RW discs may not be readable in some drives due to variations in disc
quality and drive characteristics from one manufacturer to another.
Writable DVD Discs
The DVD/CD RW drive can write to DVD+R DL, DVD+R and DVD-R discs,
as well as to DVD+RW and DVD-RW discs, when used with writing software.
The playback (read) compatibility with DVD-ROM drives or DVD players of
data written by this DVD/CD RW drive depends on the capabilities of the
DVD-ROM drives or the DVD players and on the logical format selected when
the disc is recorded (written).
DVD+R DL/DVD+R/DVD-R Discs
Data can be written to this type of disc only once. Once it has been written, it
cannot be erased. Playback (read) compatibility of DVD+R and DVD-R discs
with DVD-ROM drives or DVD players depends on the capability of the
DVD-ROM drive and the DVD player and on the logical format selected when
it is recorded (written).
DVD+RW and DVD-RW Discs
Data can be repeatedly written to or erased from this type of disc. Typically, a
new DVD+RW or DVD-RW disc can be rewritten about 1,000 times.
Playback (read) compatibility of DVD+RW and DVD-RW discs with DVD-
ROM drives or DVD players depends on the capability of the DVD-ROM
drive and the DVD player and on the logical format selected when it is
recorded (written).
Disc Playback (Reading Data)
DVD+R DL/DVD+R/DVD-R discs, as well as DVD+RW and DVD-RW
discs created and finalized with the DVD/CD RW drive can be played back on
almost all DVD-ROM drives. However depending on the type of your drive,
playback of DVD+R DL, DVD+RW, and DVD-RW discs may not be
supported.
In addition, some drives do not support multi-session (DVD+R DL/DVD+R/
DVD+RW) or multi-border (DVD-R/DVD-RW). In these cases, you can only
playback the disc in single-session (DVD+R DL/DVD+R/DVD+RW) or
single-border (DVD-R/DVD-RW).
Also, DVD-Video discs created with the DVD/CD RW drive can be played
back on many standard DVD players. However depending on the type of your
player, playback of DVD+RW and DVD-RW discs may not be supported.
Further, because of the differences in quality and characteristics between
various DVD-ROM drive, DVD player, DVD+R DL disc, DVD+R disc,
DVD+RW disc, DVD-R disc, and DVD-RW disc manufacturers, playback
may not be possible depending on the combination. (Playback compatibility is
not under warranty.)
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions when Writing Data to Disc
Write speed and compatible discs
• When writing data to disc at high speeds, you must use the appropriate type
of disc.
• Configure the writing speed through your writing software. For details about
the setting procedures, refer to your writing software documentation.
• When writing data to disc, the drive may adjust the writing speed to the
quality of the disc in the drive. Depending on the transfer rate, there may also
be limitations on writing speeds.
DVD region codes
The playback of DVD-Video (DVD discs) is protected and controlled by a
region code 2 setting. For the drive to play back DVD-Video, the region code
on the DVD disc, the region code of the drive, and the region code of the
DVD-Video software must all match.
With this drive, the region code can be set up to five times, including the initial
assignment (RPC phase 21) standard). After setting the region code five times,
the setting becomes permanent and can no longer be changed. From this point
on, you are only able to play back DVD-Video whose region code matches the
one set the fifth time.
Do not attempt to make unauthorized changes to the region code. Any
problems resulting from doing so are not covered by the warranty.
Hint
You can change the region code of the drive on it's properties dialog box accessible from the
Device Manager.
Precautions when playing back DVD-Video
DVD-Video disc playback conditions are sometimes determined by software
manufacturers. Because the drive plays back discs as determined by software
manufacturers, some drive functions may not always perform as expected.
When playing back DVD-Video, refer to the documentation accompanying
each disc.
DVD copy protection technology
Most DVD-Video discs on the market are protected against unauthorized
copy. Attempting to copy protected discs violates copyright laws.
1)
Region Playback Control (RPC) standard.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Copy controlled CDs
This product is designed to play back discs conforming to the compact disc
(CD) standard. Audio CDs encoded with copyright protection technology are
now marketed by various record companies. Be aware that some of these discs
do not conform to the CD standard and you may not be able to play them back
with the drive. When using the drive as an audio CD player, only use audio
CDs with the following mark. Some of these discs are encoded in such a way
as to prevent sampling and/or copy, while others can only be played back
under certain conditions. For details, refer to the documentation of your audio
CD.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Maximizing Performance
Reaching the Highest Possible Data Transfer Rate
Make sure that you use High Speed discs for which this operation has been
certified by Sony. For the latest information about these discs, visit the user
support Web site. When using discs other than those mentioned above, the
drive may limit writing speed to preserve a good reading quality.
Updating the Firmware
We recommend using the drive with the latest firmware as some problems
encountered when using the drive can be solved simply by updating the drive
firmware. Firmware updates are available on the user support Web site. See
page 34 for details.
Hint
The firmware is the built-in software that makes the drive work.2-188-006-11 (1)
Using 48x Read/Write Speed (Turbo Boost Function)
The default read/write speed of this drive is 40× speed. With a single touch,
you can activate the Turbo Boost function, making the read/write speed 48×
speed.
Note
• On rare occasions, some discs may not be able to tolerate 48× speed, causing them to break.
We recommend that you do not use deeply scratched, brittle, or other discs that may break
at 48× speed.
•
The Turbo Boost function does not guarantee a 48× write speed. Depending on the
condition of the disc you are using, the speed may be lower.
•
The Turbo Boost function does not increase read/write speed with CD-RW discs.
1 Insert a disc into the drive.
The read/write speed when you insert a disc is normally 40× speed.
2 Press the Eject button for five seconds.
The Busy indicator blinks twice and the read/write speed switches to 48×
speed. (The Turbo Boost function is active.)
Hint
When you open the disc tray, the read/write speed reverts to its default of 40× speed.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
B Miscellaneous
• Do not store discs in dusty, dirty or humid
locations, in direct sunlight, or near heat-
generating devices.
• To protect important data, always keep
discs in their protective cases.
Precautions for Use
Operation and storage conditions
Avoid using or storing the drive in a hot or
humid location, or where it might be subject
to severe vibration or direct sunlight.
• Do not wipe writable discs to clean them
before recording data. Instead, use a
blower to remove any dust.
• Data may not record properly if a scratch
or dust is present on the unrecorded area of
writable discs. Use special care when
handling.
On transportation
• Please repack the drive in its original
carton when shipping by itself.
• If the drive is to be shipped while installed
in a PC, remove any disc beforehand.
Avoiding condensation problems
As much as possible, avoid sudden
temperature changes. Do not attempt to use
the drive immediately after moving it from a
cold to a warm location, or raising the room
temperature suddenly, as condensation may
form within the drive. If the temperature
changes suddenly while using the drive, stop
using it but keep the power on for at least an
hour.
Handling discs
• Handle discs only by the edges. Never
touch the recording surface.
• Do not affix labels on discs.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Drive
Specifications
Data transfer rate
DVD: 22.1 MB/s (16× speed )
CD: 7.2 MB/s (48× speed )
3)
Compatible discs
Read
Write
(max.)
3)
(max.)
DVD+R
8
8
8
8
6
8
8
8
8
8
8
8
8
×
-CAV
-CAV
-CAV
-CAV
-CAV
-CAV
-CAV
-CAV
-CAV
-CAV
-CAV
-CAV
-CAV
2.4×
Access time
Average random stroke
DVD+R (4×
)
)
×
4×
DVD+R (8×
×
8× -PCAV
16× -CAV
2.4×
Approx. 135 ms (DVD)
DVD+R (16×
)
×
DVD+R Double Layer
DVD+RW
×
Approx. 140 ms (CD)
×
2.4×
3)
Maximum data transfer rate depends on the
DVD+RW (4×
)
×
4
1
4
×
×
×
capabilities of the host computer.
DVD-R
×
DVD-R (4×
)
)
×
DVD-R (8×
×
8× -ZCLV
Buffer underrun error protection
DVD-RW
×
1
2
4
—
—
×
×
×
DVD-RW (2×
)
)
×
DVD-RW (4×
×
DVD-ROM
16×-CAV
Operating environment
DVD-Video
CD-R
CD-RW
CD-RW (High Speed)
CD-RW (Ultra Speed)
CD-ROM
6
×
-CAV
48×-CAV1) 48×-CAV1)
Operating temperature
5 to 35 ºC
32×-CAV
4
10×
×
32×-CAV
32×-CAV 24×-ZCLV
48×-CAV1)
10×-CAV
48×-CAV
—
—
—
Power and miscellaneous
CD-DA
CD-DA (DAE)
Power source
DC +12 V (supplied from the DC IN jack)
Disc diameters
Consumption
Max. 3.0 A
DVD
CD
1)
12 cm
8 cm2)
12 cm
8 cm2)
—
AC adapter
AC 100 - 240 V (use a power cord
appropriate to the region or country of use)
The default setting is 40x. You must use the
turbo boost function to achieve 48x speed.
2)
With 8 cm discs, you must place the drive
horizontally.
Size
Approx. 52 × 164 × 234 mm (W×H×D)
(excluding front panel)
Depending on your system, there may be
limitation on maximum writing speed.
Weight
Approx. 1.5 kg (drive only)
Writing systems
DVD
Random write
Sequential write
Interface
Drive interface
IEEE1394-compliant (6-pin connector) ×1
IEEE1394-compliant (4-pin connector) ×1
USB 2.0-compliant (Hi-Speed USB) ×1
CD
Track-at-once
Disc-at-once
Session-at-once
Packet writing
Buffer capacity
2 MB
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Drive product number (Inquiry)
SONY DVD RW DRU-710A
Design and specifications are subject to
change without notice.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Product and Support
Information
Support Overview
If you have problems with the drive, or are
unsure of a procedure or some other details,
please contact your Sony customer support
center.
Sony Global Sites Information
(As of April, 2004)
Product purchased in the USA:*
User Support Web Site
Product purchased in Canada:
You can find the following information on
this Web site. The information is
periodically updated, so we recommend that
you visit regularly.
Product purchased in Australia or New
Zealand:
• Information about the drive
• Information about the software supplied
with the drive
Product purchased in Europe:*
• Latest firmware
Product purchased in Hong Kong:*
• Frequently asked questions
• Troubleshooting guide
• Certified compatible computers
• Certified compatible discs
• Operating instructions
• Et cetera
Product purchased in China:*
Product purchased in Singapore:
Accessing the user support Web
site
Product purchased in Taiwan:*
index.htm
Insert the supplied software disc into the
drive, and in the [Menu Selection] screen,
click [User Support Web Page]. You can
also directly type the user support Web site
address (see Product and Support
Product purchased in Korea:*
Product purchased in Brazil:
Information for details) in the address box of
your Web browser.
Product purchased in the Middle East:
* Local Web sites for computer peripheral
products
Update the Drive Firmware
Some problems encountered when using the
drive can be solved simply by updating the
drive firmware. Firmware updates are
available on the user support Web site.
Access the site, make sure that there is an
update for your firmware, and follow the
instructions on the screen to proceed with
download and installation.
About the Bundled Software
Detailed information about the supplied
software is available on the Web sites of the
software manufacturer.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Technical Support
Please consult the above sources before
calling with questions about using this
product, or with technical questions about
the drive or the supplied software. If using
telephone or e-mail support, please have the
following information available:
• Model number: DRX-710UL
• Serial number
• Date and place of purchase
• Computer maker and model number
• Computer specifications (CPU speed,
memory size, OS version, etc.)
• Writing software used (version, etc.)
Local technical support is only
available in the specified sales
regions. The customers in these
regions should be provided with a
warranty card for this product. For
contact information, refer to the
warranty card.
Note that technical support
conditions may vary according to
the locality, and that charges
and/or limited service may apply in
some regions.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Sony Corporation Printed in China
Download from Www.Somanuals.com. All Manuals Search And Download.
|