3-218-336-12(1)
Set the clock
Scan tuning (for FM)
Do the following if DAB broadcast is not available (depending on area). The time
setting mode by DAB becomes invalid.
The unit will automatically scan FM station.
1 Press RADIO ON/OFF•ALARM RESET to turn on the radio.
2 Press DAB/FM to select the FM band.
3 Press UP(B)/DOWN(b)•TUNE/SELECT to choose the
direction, and then press ENTER•FM SCAN.
UP(B): Scans to the higher frequency.
1 Press MENU and UP(B)/DOWN(b)•TUNE/SELECT to
select the “Set clock,” and then press ENTER.
The hour indication will be displayed as follows.
DAB/FM CLOCK
ALARM1 ALARM2 ALARM3 ALARM4
RADIO
DOWN(b): Scans to the lower frequency.
Scanning starts from the frequency being tuned in. When a station is
received, scanning stops.
AM
PM
or ENTER
Operating Instructions
4 If necessary, press UP(B)/DOWN(b)•TUNE/SELECT to tune
Time
PM08 :56
in to the station more precisely.
5 Adjust the volume using VOL +/–.
2 Press UP(B)/DOWN(b)•TUNE/SELECT to set the hour, and
then press ENTER.
3 Repeat step 2 to set the minute, year, month and day.
After setting the time, the clock starts from 0 seconds.
Setting the alarm
Notes
This unit allows you to set four alarm programmes (ALARM 1 - 4).
The alarm time can be set for every programme and the alarm sound is selectable
from radio or buzzer.
• If you do not operate within 7 seconds while setting the clock, the clock setting
mode will be cancelled.
• Setup time for this operation is adjusted automatically when the customer
operates the set while receiving DAB service.
The alarm will come on at the same time everyday. Before setting the alarm,
make sure to set the clock (See “Setting the Clock”.)
Dream Machine is a trademark of Sony Corporation.
To set the alarm time
To change the clock display
1 Press MENU and UP(B)/DOWN(b)•TUNE/SELECT to
You can choose the clock display 12-hour system (default) and 24-hour system.
select “Alarm settings,” and then press ENTER.
XDR-C705DAB
1 Press MENU and UP(B)/DOWN(b)•TUNE/SELECT to
2 Press UP(B)/DOWN(b)•TUNE/SELECT to select the desired
alarm (1 - 4) and then press ENTER.
show the “Clock display” in the display, and then press ENTER.
When the alarm is not set up, “Not in use” appears in the display.
2 Press UP(B)/DOWN(b)•TUNE/SELECT to select the desired
© 2007 Sony Corporation
Printed in China
3 Press UP(B)/DOWN(b)•TUNE/SELECT to select the alarm
clock display, and then press ENTER.
mode (DAB, FM and buzzer) and then press ENTER.
“Set alarm” appears in the display.
The clock display changes by turns (12-hour system:
“AM 12:00” = midnight, 24-hour system: “0:00” = midnight.)
If you select DAB or FM, “Set volume” appears in the display. In this case,
repeat this step and adjust the volume.
ALARM1 ALARM2 ALARM3 ALARM4
4 Press UP(B)/DOWN(b)•TUNE/SELECT to select “ON,” and
AM
PM
then press ENTER.
The alarm time appears in the bottom of the display, and the arrow appears in
both sides of the hour indicator.
Clock Display
12hour system
BRIGHTNESS
5 Press UP(B)/DOWN(b)•TUNE/SELECT to set the hour, and
then press ENTER.
DISPLAY MENU
SLEEP
ALARM
VOL
DAB/FM
TUNE/SELECT
DOWN UP
FM SCAN
ENTER
ALARM RESET
The arrow appears in both sides of the minute indicator.
SNOOZE/
SLEEP OFF
RADIO
PRESET
VOL
ON/OFF
6 Repeat step 5 to set the minute and the alarm mode.
The alarm mode as follows:
Time adjustment about
Summer time
Weekdays: Every Monday to Friday
Weekends: Every Saturday and Sunday
Daily: Everyday from Sunday to Saturday
Once: Once only
This unit’s time adjustment will be done only when receiving DAB service.
Receive DAB service for at least one minute to renew the time into Summer time.
Wire antenna
If you select “Once” repeat step 5 to set the year, month and day.
7 Press ENTER.
The setting is complete.
Setting the brightness of the
display
Tip
AC power
cord
You can set the alarm using ALARM button on the unit.
Press ALARM and follow after steps 2.
Press and hold DISPLAY•BRIGHTNESS for few seconds to change the
brightness. Repeat this step, to select high, middle or low for the display
according to your preferences.
Notes
• The default alarm time for radio and buzzer is the current time of the clock.
ALARM1 ALARM2 ALARM3 ALARM4
• If you quit during the alarm setting, after about 7 seconds the previous display
will return.
• If a second alarm sounds during a first (or the snooze function is active), the
second alarm takes priority.
• If the alarm sounds at the same time (or the snooze function is active), the large
alarm number takes priority.
AM
PM
Improving the reception
DAB Band-III/FM:
Extend the wire antenna fully to increase reception sensitivity.
• When Summer time begins, it is necessary to adjust the current time by
manually (see “Time adjustment about Summer time” ).
There is a tactile dot beside VOL +.
Operating the radio
To set the alarm on/off
The unit can receive DAB services and FM stations.
1 Follow steps 1 to 4 in “To set the alarm time.”
“Set alarm” appears in the display.
1 Press RADIO ON/OFF•ALARM RESET to turn on the radio.
2 Press UP(B)/DOWN(b)•TUNE SELECT to set the alarm
When the unit is turned on again, the last band you listened to is received.
“ON” or “OFF,” and then press ENTER.
ON: “ALARM (1-4)” appears in the display when the alarm setting is
complete.
2 Press DAB/FM repeatedly to select the desired band.
Each press changes the band as follows:
WARNING
DAB
FM
OFF: “ALARM (1-4)” turn off from the display.
To reduce the risk of fire or electric shock, do not expose this
apparatus to rain or moisture.
ALARM1 ALARM2 ALARM3 ALARM4
3 Press the UP(B)/DOWN(b)•TUNE/SELECT to tune to the
desired service or station.
To avoid electrical shock, do not open the cabinet. Refer servicing to
qualified personnel only.
AM
PM
If you are selecting DAB, press ENTER.
Do not install the appliance in a confined space, such as a bookcase or built-in
cabinet.
To reduce the risk of fire or electric shock, do not place objects filled with
liquids, such as vases, on the apparatus.
Connect the apparatus to an easily accessible AC outlet. Should you notice an
abnormality in the apparatus, disconnect the main plug from the AC outlet
immediately.
Set Alarm
OFF
4 Adjust the volume using VOL +/–.
Note in FM usage
The frequency step is set to 0.05 MHz on FM.
3 Follow after step 5 in “To set the alarm time.”
The setting is complete.
Notes in DAB usage
• If there are no services, you can choose only MANUAL mode.
• “Station not available” appears when the ensemble for the selected service
cannot be received.
ALARM1 ALARM2 ALARM3 ALARM4
Notice for the customer in the countries applying EU Directives
The manufacturer of this product is Sony Corporation, 1-7-1 Konan, Minato-ku,
Tokyo, Japan. The Authorized Representative for EMC and product safety is
Sony Deutschland GmbH, Hedelfinger Strasse 61, 70327 Stuttgart, Germany. For
any service or guarantee matters please refer to the addresses given in separate
service or guarantee documents.
AM
PM
21-07-2007
About the SC (Secondary Component)
If the selected primary component has a secondary component, “ii” appears in
the display.
To doze for a few more minutes
SVC2
SVC1
Press SNOOZE/SLEEP OFF.
Features
The radio or buzzer turns off but will automatically come on again after about
5 minutes. (while the snooze function is operating, “Snooze” flashes in the
display.)
• DAB(Band-III)/FM 2-band digital clock radio
• Large clock display and 16 × 2 lines character dot display for text information
• Brightness control
Press UP(B)/DOWN(b)•TUNE/SELECT and ENTER to receive the desired
secondary component. “II” appears while the secondary component is received.
• 4 alarms with various alarm mode; weekdays, weekends, daily and once
• 20 memory presets (10 DAB, 10 FM)
• Current time and Summer time adjustment synchronized with DAB data
• Sleep timer
Note
To stop the alarm
When the selected secondary component is finished, the unit returns
automatically to the primary component.
Press RADIO ON/OFF• ALARM RESET to turn off the alarm.
The alarm will come on again at the same time the next day.
Presetting your favourite
Setting the Sleep Timer
Initial setting for the clock
You can enjoy falling asleep to the radio using the built-in sleep timer that turns
off the radio automatically after a preset duration.
services or stations
radio
You can preset 10 services in DAB and 10 stations in FM.
When the first time after purchase, do the following.
1 Press SLEEP while the unit is turned on.
Presetting services or stations
“Sleep” appears in the display.
1 Follow steps 1 to 3 in “Operating the radio” and manually tune in
1 Plug in the unit.
ALARM1 ALARM2 ALARM3 ALARM4
to the broadcast you wish to preset.
“Setting clock...” appears in the display, and DAB data adjust the clock as it
is received. When finished, the current time appears in the display.
AM
PM
2 Press PRESET.
3 Press UP(B)/DOWN(b)•TUNE/SELECT to select the
ALARM1 ALARM2 ALARM3 ALARM4
Sleep
60 minutes
favourite number to preset, then press and hold PRESET.
“saved” appears for 7 seconds in the display and the service or station is
stored. (DAB services are stored with a service label.)
AM
PM
2 Press SLEEP to set the sleep timer duration.
Setting clock...
Notes
Each time you press SLEEP, the duration changes as follows:
• To preset another service or station, repeat these steps.
60
45
30
15
OFF
• To change the preset service or station, tune in to the desired service or
station and repeat steps 2 and 3. The new service or station will replace the
previous service or station.
• When the service or station is not registered, “Empty preset” appears in the
display.
2 Press RADIO ON/OFF•ALARM RESET to turn on the radio.
The unit will automatically scan and create a list of receivable DAB
broadcasts.
The unit automatically turns off when the duration time is passed.
Press ENTER or 7 seconds after you have finished setting the duration setting
and released SLEEP, “activated” appears in the display and then the sleep timer
starts. The unit will play for the duration you set, and then shut off.
• If you do not operate within 7 seconds during the above steps, the current
mode will be cancelled.
ALARM1 ALARM2 ALARM3 ALARM4
AM
PM
To change the Sleep Timer setting
Tuning in to a preset service or station
Repeat step 2 to select the desired sleep timer setting even after the sleep timer
Sony DAB Radio
has been activated.
1 Press PRESET.
2 Press UP(B)/DOWN(b)•TUNE/SELECT to select the desired
To deactivate the Sleep Timer
Notes
preset station and then press ENTER.
• Press SNOOZE/SLEEP OFF, the unit will turn off.
• When the clock will not be set in 3 minutes, “AM 12:03 clock not set...”
appears in the display (see “Setting the clock.”)
• If no broadcasts are found by the DAB scan, “Station not available” appears
in the display.
• Press SLEEP to set the sleep timer “OFF,” only the sleep timer will be
cancelled (the radio keeps ON).
Notes
• When the service or station is not registered, “Empty preset” appears in the
display.
• If you do not operate within 7 seconds during the above steps, the current
mode will be cancelled.
Continue to next page
Download from Www.Somanuals.com. All Manuals Search And Download.
|