3-280-848-11(2)
Digital HD Video
Camera Recorder
Operating Guide
Before operating the unit, please read this manual thoroughly,
and retain it for future reference
http://www.sony.net/
Printed on 70% or more recycled paper
using VOC (Volatile Organic Compound)
-free vegetable oil based ink.
HVR-Z7E/Z7P
© 2008 Sony Corporation
Printed in Japan
Download from Www.Somanuals.com. All Manuals Search And Download.
Read this first
Before operating this unit, please read this
manual thoroughly, and retain it for future
reference.
Types of “Memory Stick” you can use
in your camcorder
You can use any “Memory Stick” that has
the following markings.
Notes on use
Types of cassette you can use in your
camcorder
Your camcorder is capable of recording in
HDV, DVCAM and DV formats.
When recording in HDV/DV format, Sony
recommends that you use mini DV
cassettes.
“Memory Stick Duo”
(This size can be used with your
camcorder.)
When recording in DVCAM format, Sony
recommends that you use mini DVCAM
cassettes. Your camcorder does not support
“Memory Stick”
(You cannot use it in your camcorder.)
The HDV format
• Digital high-definition (HD) video signals
are recorded and played back on a DV
format cassette.
• HDV signals are compressed in MPEG2
format, which is adopted in BS (broadcast
satellite) digital and terrestrial digital
HDTV broadcastings and in Blu-ray disc
recorders.
b Notes
• You cannot use any type of memory card
except “Memory Stick Duo.”
• “Memory Stick PRO Duo” can be used
only with “Memory Stick PRO”
compatible equipment.
• Do not attach a label or the like on a
“Memory Stick Duo” or a Memory Stick
Duo Adaptor.
• When using a “Memory Stick Duo” with
“Memory Stick” compatible equipment,
insert the “Memory Stick Duo” into the
Memory Stick Duo Adaptor.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the camcorder
• Do not hold the camcorder by the
following part.
About menu items, LCD panel,
viewfinder, and lens
• A menu item that is grayed out is not
available under the current recording or
playback conditions.
• The LCD screen and the viewfinder are
manufactured using extremely high-
precision technology, so over 99.99% of
the pixels are operational for effective
use. However, there may be some tiny
black points and/or bright points (white,
red, blue, or green in color) that appear
constantly on the LCD screen and the
viewfinder. These points are normal
results of the manufacturing process and
do not affect the recording in any way.
Lens hood
LCD panel
Viewfinder
Microphone or
Microphone holder
Accessory shoe
adaptor
Memoryrecording
unit
Black point
White, red, blue or green point
b Notes
Do not expose your camcorder’s
viewfinder, lens, or LCD screen to the
sun or strong light source for extended
periods.
• The camcorder is not dustproof, dripproof
or waterproof.
• Do not connect cables to your camcorder
with their terminals placed the wrong
way. Squeezing the terminals into your
camcorder's jacks may damage them or
results in a malfunction of your
camcorder.
• Intense light sources, especially the sun
will converge on the viewfinder or lens
and damage the internal parts of your
camcorder. Avoid sunlight or other strong
light sources when storing your
camcorder. Protect this device by always
closing the lens cover or by placing it in
its bag when not in use.
On recording
• Before starting to record, test the
recording function to make sure the
picture and sound are recorded without
any problems.
Continued ,
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Read this first (Continued)
• Compensation for the contents of
recordings cannot be provided, even if
recording or playback is not possible due
to a malfunction of the camcorder, storage
media, etc.
• TV color systems differ depending on the
countries/regions. To view your
recordings on a TV, you need a PAL
system-based TV.
• Television programs, films, video tapes,
and other materials may be copyrighted.
Unauthorized recording of such materials
may be contrary to the copyright laws.
• Because of the way that the image device
(CMOS sensor) reads out image signals,
the subjects passing by the frame rapidly
might appear crooked depending on the
recording conditions. This phenomenon
may be notable in displays having high
motion resolution.
About this manual
• The images of the LCD screen and the
viewfinder used in this manual for
illustration purposes are captured using a
digital still camera, and therefore may
appear different.
• The on-screen displays in each local
language are used for illustrating the
operating procedures. Change the screen
language before using your camcorder if
• Design and specifications of recording
media and other accessories are subject to
change without notice.
About the Carl Zeiss lens
Your camcorder is equipped with a Carl
Zeiss lens, which was developed jointly by
Carl Zeiss, in Germany, and Sony
Corporation, and produces superior images.
It adopts the MTF measurement system for
video cameras and offers a quality typical
of a Carl Zeiss lens. Also, the lens for your
camcorder is T -coated to suppress
unwanted reflections and faithfully
reproduce colors.
On playing back HDV tapes on other
devices
A tape recorded in the HDV format cannot
be played back on a device that is not
compatible with the HDV format.
Check the contents of tapes by playing
them back on this camcorder prior to
playing them back on other devices.
MTF= Modulation Transfer Function. The
number value indicates the amount of light
from a subject coming into the lens.
Notes on the icons used in this
manual
Features available for the HDV
format only.
Features available for the DVCAM
format only.
Features available for the DV SP
format only.
The function that can be used when
i.LINK cable is connected.
The function that can be assigned to
an ASSIGN button.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
Read this first ...........................................................................................2
Assigning the functions to the ASSIGN buttons .....................................43
Searching for the last scene of the most recent recording
Playing back the most recently recorded movies
Using the Shot transition ........................................................................46
Continued ,
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents (Continued)
Menu items ............................................................................................ 66
Settings for the audio recording (DV AU.MODE/XLR SET, etc.)
Display settings of the display and the viewfinder (MARKER/VF B.LIGHT/DISP
OUTPUT, etc.)
Recording settings, input and output settings (REC FORMAT/HDV PROGRE./
VIDEO OUT/EXT REC CTRL, etc.)
(TC/UB SET) menu ......................................................................... 87
(TC PRESET/UB PRESET/TC LINK, etc.)
Settings for the “Memory Stick Duo” (ALL ERASE/FORMAT, etc.)
etc.)
Troubleshooting ................................................................................... 103
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
HDV format and recording/playback ................................................ 116
Compatibility of the DVCAM/DV formats........................................... 117
About the “Memory Stick” ................................................................. 119
About i.LINK...................................................................................... 121
About x.v.Color ................................................................................. 122
Quick Reference
7
Download from Www.Somanuals.com. All Manuals Search And Download.
GSetttiengpSta1rte:d Checking supplied items
Large eyecup (1) (p. 19)
Make sure that you have following items
supplied with your camcorder.
The number in the parentheses indicates the
number of that item supplied.
• The cassette tape and “Memory Stick Duo” are
of cassette tapes and “Memory Stick Duo” that
you can use on your camcorder.
This lens hood is pre-mounted.
Carl Zeiss lens (VCL-412BWH) (1) (p. 10)
This lens is pre-mounted.
Memory Recording Unit (HVR-MRC1) (1)
Wind Screen (1), Microphone (ECM-XM1)
(1) (p. 12)
i.LINK Cradle (HVRA-CR1) (1) (p. 13)
Rechargeable battery pack (NP-F570) (1)
Accessory shoe kit (Accessory shoe (1),
Accessory shoe plate (1), screws (4))
AC Adaptor/Charger (AC-VQ1050) (1)
Wireless Remote Commander
A button-type lithium battery is already installed.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Attaching the supplied items
2 Align the center slot in the lens mount
Mounting the lens
with the center pin on the lens, and
insert the lens into the mount.
Make sure to turn off the POWER switch of
your camcorder before mounting the lens.
Refer to the manuals provided with the lens
for details on the proper handling of the
lens.
3 While holding the lens in place, push
the lens locking lever C down to
mount the lens.
4 Connect the lens cable to the LENS jack
A.
b Notes
• You can mount a 1/3" lens directly on your
camcorder. You can mount a 1/2" lens via the
Fujinon ACM-19 or equivalent. You can mount
a 2/3" lens via the Fujinon ACM-17 or
equivalent.
• If the lens is not properly locked, it may come
off when in use, which may cause a serious
problem. Make sure that the lens is securely
locked. Sony recommends that you set the lens
securing tab B as illustrated.
• Press the REC START/STOP button on the
handle or the START/STOP button on the
Remote Commander to record when using a
lens that does not have a lens cable.
Mounting the Carl Zeiss lens
z Tips
1 Push the lens locking lever C up and
remove the lens or the lens mount cap
from the lens mount.
• When you attach a non-Carl Zeiss lens, Sony
recommends that you adjust the black balance
with the iris closed before recording. (p. 33)
2 Align the center slot in the lens mount
with the center pin on the lens, and
insert the lens into the mount.
Adjusting the flange focal length (for
Carl Zeiss lens)
3 While holding the lens in place, push
the lens locking lever C down to
mount the lens.
You need to adjust the flange focal length
(the distance from the lens flange to the
plane of the image along the optical axis) in
the following cases.
b Notes
• If the lens is not properly locked, it may come
off when in use, which may cause a serious
problem. Make sure that the lens is securely
locked. Sony recommends that you set the lens
securing tab B as illustrated.
• After you have changed lenses.
• When you cannot adjust focus properly during
zoom in or out.
z Tips
• Your camcorder can store flange focal length
data for ten different Carl Zeiss lenses (VCL-
412BWH/VCL-308BWH). If you remount the
lens after you have mounted ten different lenses
and adjusted their flange focal length, you need
to adjust the flange focal length for the lens even
for the Carl Zeiss lens whose flange focal length
has been adjusted.
Mounting non-Carl Zeiss lens
1 Push the lens locking lever C up and
remove the lens or the lens mount cap
from the lens mount.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Select [YES] with the SEL/PUSH
EXEC dial E.
5 Turn the zoom ring D to the telephoto
position.
6 Turn the focus ring C until the subject
comes in focus, then press the SEL/
PUSH EXEC dial E.
MANUAL
ZOOM
SERVO
7 Turn the zoom ring D to the wide angle
position.
8 Turn the focus ring C until the subject
comes in focus, then press the SEL/
PUSH EXEC dial E.
Adjusting the flange focal length
automatically
When the adjustment is completed,
[Completed.] appears on the screen.
If the adjustment fails, [Could not adjust.]
appears on the screen. Try the adjustment
again.
1 Set the ND filter B to 1 to adjust
brightness so that the proper video light
level is obtained.
2 Place the flange focal length adjustment
test chart A about 2-3 meters (7-10
feet) away. Zoom in and set your
camcorder to locate the center of the
chart in the center of the screen.
z Tips
• You can check the focusing easily if you do the
following before adjusting the focal length.
–
Set [PEAKING] in the
(DISPLAY
3 Set the ZOOM switch F to SERVO.
– Press the ASSIGN button to which
[EXP.FOCUS] is assigned (L2 button by
4 Select [AUTO ADJUST] in [FLANGE
BACK] of the
(CAMERA SET)
5 Select [YES] with the SEL/PUSH
EXEC dial E.
The flange focal length adjustment starts
and [EXECUTING] appears on the screen.
When the adjustment is completed,
[Completed.] appears on the screen.
If the adjustment fails, [Could not adjust.]
appears on the screen. Try the adjustment
again.
Adjusting the flange focal length
manually
1 Perform steps 1 and 2 of “Adjusting
the flange focal length automatically.”
2 Set the ZOOM switch F to MANUAL.
3 Select [MANU ADJUST] in [FLANGE
BACK] of the
menu.
(CAMERA SET)
Continued ,
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 2: Attaching the supplied items (Continued)
The channel to be used differs
Attaching the supplied
microphone
depending on the relationship between
the REC CH SELECT switch positions
and the input jacks.
See the table below.
REC CH SELECT
switch position
Channel to
be used
Input jack
CH1, CH2
INPUT1 Channel1
Channel2
INPUT2
-
CH1
INPUT1 Channel1
INPUT2 Channel2
z Tips
INPUT2 INPUT1
• Set the INPUT1/INPUT2 switch to MIC+48V
when you use the supplied microphone.
LINE
MIC
MIC
LINE
MIC
MIC
INPUT2
INPUT1
Attaching the lens hood with lens
cover
1
2
Attach the wind screen B to the
supplied microphone A.
Place the microphone A in the
microphone holder C with the
model name facing upward, close
the cover, and shut the clamp.
PUSH (lens hood release) button
3
Connect the plug of the
microphone to the INPUT1 jack
D.
Align the marks on the lens hood to
those on the camcorder, and turn the
lens hood in the direction of the
arrow 2.
4
5
Put the microphone cable into the
cable holder E.
To remove the Lens hood with lens
cover
Turn the lens hood in the opposite direction
to the arrow 2 in the illustration while
Select the channel with the REC
CH SELECT switch F.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
b Notes
pressing the PUSH (lens hood release)
button.
• You cannot use the HDV/DV jack when the
Memory Recording Unit is attached to your
camcorder.
z Tips
• If you attach or remove a 72mm (2 7/8 in.) PL
filter or MC protector, remove the lens hood
with lens cover.
To remove the Memory Recording
Unit
Slide the unit upward while pushing the
RELEASE lever of the Memory Recording
Unit downward.
To open or close the shutter of the
Lens hood with lens cover
Move the lens cover lever up or down to
open or close the lens cover.
To attach the Memory Recording Unit
to the i.LINK Cradle
Attach the Memory Recording Unit to the
i.LINK Cradle as illustrated.
Move the lens cover lever to OPEN to
open the lens cover, and move the lever to
CLOSE to close the lens cover.
Attaching Memory Recording Unit
Make sure that the HDV/DV jack cover is
closed.
Attach the Memory Recording Unit to your
camcorder as illustrated.
For details, refer to the Operating
Instructions of the Memory Recording Unit
on the CD-ROM.
To remove the Memory Recording
Unit from the i.LINK Cradle
Slide the unit upward while pushing the
RELEASE lever of the Memory Recording
Unit downward.
z Tips
• Refer to the operating instructions of HVR-
MRC1 on the supplied CD-ROM for details on
the i.LINK cradle.
HDV/DV jack (6-pin)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3: Charging the battery pack
You can charge the "InfoLITHIUM"
battery pack (L series) with the
supplied AC Adaptor/Charger.
After charging the battery
All segments of the battery mark (
appear in the display window when the
)
normal charge of the battery is completed.
You can fully charge the battery pack if you
continue charging the battery pack after the
charge lamp turns off until the battery mark
with “FULL” appears (full charge). The
battery life of the fully charged battery is
slightly longer than that of the normally
charged battery.
b Notes
• You cannot use batteries other than the
“InfoLITHIUM” battery pack (L series)
2
Remove the battery pack from the AC
Adaptor/Charger when the charge is
completed.
3
4
z Tips
1
• You can check the remaining battery life with
To attach the battery pack
Press the battery pack against the back of
your camcorder and slide it down.
Charge lamp
1
2
3
4
Set the mode change switch to
CHARGE.
Connect the mains lead to the AC
Adaptor/Charger.
Connect the mains lead to the
wall socket.
Place the battery pack in the slot
of the AC Adaptor/Charger, press
it down, and slide it in the
direction of the arrow as
illustrated.
The charge lamp turns on and charging
starts.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording in the HDV format
To remove the battery pack
Continuous
recording
time
Typical
recording
time*
Slide the POWER switch to OFF. Push the
BATT RELEASE (battery release) button
and remove the battery pack.
Battery pack
NP-F570
(supplied)
130
130
265
270
395
400
75
75
NP-F770
155
155
235
235
NP-F970
Recording in the DVCAM (DV) format
Continuous
recording
time
Typical
recording
time*
BATT RELEASE
(battery release) button
Battery pack
NP-F570
(supplied)
130
135
275
280
410
415
75
75
To store the battery pack
If the battery pack will not be used for a
while, run down the battery and store it. See
page 121 for details on storage of the
battery pack.
NP-F770
NP-F970
160
160
240
240
Charging time
Approximate time (min.) required when
you fully charge a fully discharged battery
pack.
Top:
When the LCD backlight turns on.
Bottom: When recording with the viewfinder
while the LCD panel is closed.
* Typical recording time shows the time when
you repeat recording start/stop, turning the
power on/off and zooming.
Battery pack
NP-F570 (supplied)
NP-F770
Charging time
145
230
310
Playing time
Approximate time (min.) available when
you use a fully charged battery pack.
NP-F970
Recording time
HDV format pictures
Approximate time (min.) available when
you use a fully charged battery pack.
LCD panel
opened*
LCD panel
closed
Battery pack
NP-F570
(supplied)
175
180
b Notes
• You cannot use the NP-F330 battery pack with
this camcorder.
NP-F770
NP-F970
360
545
375
570
Continued ,
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 3: Charging the battery pack (Continued)
DVCAM (DV) format pictures
To the wall
socket
2
Mains
lead
1
LCD panel
opened*
LCD panel
closed
Battery pack
NP-F570
(supplied)
180
190
AC Adaptor/
Charger
3
4
Mode
change
switch
NP-F770
NP-F970
375
570
390
595
* When the LCD backlight turns on.
On the battery pack
• Before changing the battery pack, slide the
POWER switch to OFF.
displayed under the following conditions.
– The battery pack is not attached correctly.
– The battery pack is damaged.
– The battery pack is worn-out (For Battery
Info only).
• Sony recommends that you use an NP-F970
battery pack when you use your camcorder with
the Memory Recording Unit or a video light
(optional).
5
Connecting cord
DK-415
1 Connect the mains lead to the AC
Adaptor/Charger.
2 Connect the mains lead to the wall
socket.
3 Connect the connecting cable (DK-415)
to the AC Adaptor/Charger.
On the charging/recording/playback time
• Times measured with the camcorder at 25 °C
(77 °F) (10 to 30 °C (50 °F to 86 °F)) is
recommended).
• The recording and playback time will be shorter
when you use your camcorder in low
temperatures.
• The recording and playback time will be shorter
depending on the conditions under which you
use your camcorder.
4 Set the mode change switch of the AC
Adaptor/Charger to VCR/CAMERA.
5 Press the connecting part of the
connecting cable (DK-415) against the
back of your camcorder in the battery
slot and slide it down.
On the AC Adaptor/Charger
Using an outside power source
• Use the nearby wall outlet when using the AC
Adaptor/Charger. Disconnect the AC Adaptor/
Charger from the wall outlet immediately if any
malfunction occurs while using your camcorder.
You can use the AC Adaptor/Charger to
obtain AC power.
• Do not use the AC Adaptor/Charger placed in a
narrow space, such as between a wall and
furniture.
• Do not short-circuit the DC plug of the AC
Adaptor/Charger or battery terminal with any
metallic objects. This may cause a malfunction.
• Even if your camcorder is turned off, AC power
(house current) is still supplied to it while
connected to the wall outlet via the AC Adaptor/
Charger.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 4: Turning the power on and holding your
camcorder properly
To record or play back, set the POWER
switch to the respective positions.
When you use your camcorder for the first
time, the [CLOCK SET] screen appears
2
Hold the camcorder properly.
POWER switch
3
Ensure a good grip, then fasten
the grip belt.
1
Slide the POWER switch to
CAMERA or VCR while you press
the green button.
Slide the POWER
switch while
pressing the green
button.
CAMERA: To record pictures.
VCR: To play or edit pictures.
b Notes
To turn off the power
Slide the POWER switch to OFF while
pressing the green button.
• The current date and time appear on the LCD
screen for a few seconds when you turn on your
camcorder once you set the date and time
b Notes
• If warning messages appear on the screen,
follow the instructions.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 5: Adjusting the LCD panel and viewfinder
The LCD panel
The viewfinder
Open the LCD panel 180 degrees (1), then
rotate it to the best angle to record or play
back (2).
Viewfinder lens
adjustment lever
Move it until the picture
becomes clear.
1Open 180 degrees.
290 degrees
(max.)
2180 degrees
(max.)
TC/U-BIT DATA CODE
b Notes
• You may see primary colors shimmering in the
viewfinder when you move your eye line. This
is not a malfunction. The shimmering colors
will not be recorded on the recording media.
DISPLAY/BATT INFO button
z Tips
z Tips
• You can adjust the brightness of the viewfinder
• To display images both on the LCD display and
in the viewfinder, set [VF POWERMODE] to
• You can see your mirror image on the LCD
screen by setting the LCD panel facing you. The
image will be recorded in a normal image.
To turn off the LCD backlight to make
the battery last longer
• To display images in black and white in the
Press and hold the DISPLAY/BATT INFO
button for a few seconds until
appears.
This setting is practical when you use your
camcorder in bright conditions or when you
want to save battery power. The recorded
picture will not be affected by the setting.
To turn on the LCD backlight, press and
hold the DISPLAY/BATT INFO button for
a few seconds until
disappears.
z Tips
• You can adjust the brightness of the LCD screen
18
Download from Www.Somanuals.com. All Manuals Search And Download.
When the picture in the viewfinder is
hard to see
If you cannot see the picture in the
viewfinder clearly under bright
circumstances, use the supplied large
eyecup. To attach the large eyecup, stretch
it slightly and align it with the eyecup
groove in the viewfinder. You can attach
the large eyecup facing either the right or
left side.
b Notes
• Do not remove the pre-attached eyecup.
Large eyecup (supplied)
Attach with the
protruding part at
the top.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 6: Setting the date and time
Set the date and time when using your
camcorder for the first time. If you do not
set the date and time, [CLOCK SET] screen
appears every time you turn on your
camcorder or change the POWER switch
positions.
2
3
4
Select
(OTHERS) by turning
the SEL/PUSH EXEC dial, then
press the dial.
OTHERS
RETURN
CAMERA PROF.
ASSIGN BTN
CLOCK SET
WORLD TIME
LANGUAGE
QUICK REC
DATE REC
z Tips
--
:
--:--
• If you do not use your camcorder for about 3
months, the built-in rechargeable battery gets
discharged and the date and time settings may
be cleared from the memory. In that case,
charge the rechargeable battery and then set the
[
]
MENU :END
Select [CLOCK SET] by turning
the SEL/PUSH EXEC dial, then
press the dial.
--:--:--:--
CLOCK SET
Y
M
D
2008
-
1
-
1
0 : 00
[
]
MENU :CANCEL
Set [Y] (year) by turning the SEL/
PUSH EXEC dial, then press the
dial.
SEL / PUSH EXEC
P
MENU
P
You can set any year up to the year
2079.
MENU
button
SEL/PUSH
EXEC dial
--:--:--:--
CLOCK SET
Y
M
D
Skip to step 4 when you set the clock for
the first time.
1
1
0 : 00
2008
-
-
[
]
MENU :CANCEL
1
Press the MENU button.
5
Set [M] (month), [D] (day), hour
and minute, then press the dial.
The clock starts.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
z Tips
• The date and time are automatically recorded on
the tape, and can be displayed during playback
.
Changing the language setting
You can change the on-screen displays to
show messages in a specified language.
Select the screen language in
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Step 7: Inserting a tape or a “Memory Stick Duo”
b Notes
Cassette tape
• Do not push the portion marked
while the cassette
compartment is sliding in. Doing so may
cause a malfunction.
{DO NOT PUSH}
which tapes can be used and how to protect
from overwriting tapes.
3
Close the lid.
1
Slide and hold the
EJECT lever in the direction of the
arrow and open the lid.
OPEN/
z Tips
• The recordable time varies depending on [DV
To eject the cassette
Open the lid following the same procedure
as described in step 1 and remove the
cassette.
OPEN/EJECT lever
Lid
“Memory Stick Duo”
The cassette compartment automatically
comes out.
You can use only a “Memory Stick Duo”
marked with
,
or
(p. 119).
2
Insert a cassette with its window
facing outwards, then press
.
1
Open the Memory Stick Duo slot
cover in the direction of the
arrow.
Push the center of the back of
the cassette lightly.
Cassette
compartment
Memory Stick Duo slot cover
Window
The cassette compartment automatically
slides back in.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Insert the “Memory Stick Duo”
into the Memory Stick Duo slot in
the right direction until it clicks.
Access lamp
b Notes
• If you insert the “Memory Stick Duo” into
the slot in the wrong direction, the “Memory
Stick Duo,” the Memory Stick Duo slot, or
image data may be damaged.
To eject a “Memory Stick Duo”
Lightly push the “Memory Stick Duo”
once.
b Notes
• When the access lamp is lit or flashing, your
camcorder is reading/writing data. Do not shake
or knock your camcorder, turn the power off,
eject the “Memory Stick Duo,” or remove the
battery pack. Otherwise, image data may be
damaged.
• When inserting or ejecting the “Memory Stick
Duo,” be careful with the “Memory Stick Duo”
from popping out and dropping.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording/Playback
Recording
Recording lamp
Lens hood
REC START/
STOP button B
Recording lamp
POWER switch
REC START/STOP button A
Your camcorder records movies on tape and still images on “Memory Stick Duo.” Do the
following steps to record movies.
• This camcorder can record movies in HDV or DVCAM (DV) format. The factory setting is HDV format
1
Open the shutter of the lens hood.
2
Slide the POWER switch to CAMERA while pressing the green button.
Slide the POWER
switch while pressing
the green button.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Press the REC START/STOP button A (or B).
zREC
00:04:50:04
60min
REC
[STBY] t [REC]
The recording lamp lights up during recording.
To stop the movie recording, press the REC START/STOP button again.
z Tips
• When recording in HDV format, the aspect ratio is fixed to 16:9. When recording in DVCAM (DV)
• Indicators displayed on the screen during recording are shown on page 137.
• You cannot record movies on a “Memory Stick Duo.”
• For low angle recording, the REC START/STOP button on the handle is convenient. Release the
HOLD lever to enable the REC START/STOP button. It might be helpful if you set the LCD panel
face up or close it after turning it face down, or lift the viewfinder up during the low angle recording.
Continued ,
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording (Continued)
– Playing back in DVCAM (DV) format (4:3):
VGA
To capture still images
1 Assign [PHOTO] to an ASSIGN button.
To store still images captured from
movies on a tape on “Memory Stick
Duo”
You can capture an image in a movie and
record it on a “Memory Stick Duo” as a still
image. Be sure to insert a recorded tape and
a “Memory Stick Duo” in your camcorder,
Assign [PHOTO] to any one of ASSIGN
buttons (p. 43).
2 Press the ASSIGN button to which
[PHOTO] is assigned or the PHOTO
button on the Remote Commander.
A still image will be recorded on the
“Memory Stick Duo.”
appears
when the recording is completed.
You can capture still images during
movie recording.
z Tips
1 Set the POWER switch to VCR.
screen during recording.
2 Press the N (play) button to search for
the scene you want to save as a still
image. Press the ASSIGN button to
which [PHOTO] is assigned or the
PHOTO button on your Remote
Commander at the scene.
Capacity of the “Memory Stick Duo”
(MB) and the number of recordable
pictures
1.2M
1440
810
0.9M
1080 × 640 ×
810 480
VGA
0.2M
640 ×
360
b Notes
×
• The recorded date and time on the tape and the
stored date and time on the “Memory Stick
Duo” are both saved on the “Memory Stick
Duo.” When you view the still images, only the
recorded date and time on the tape will be
• Camera data stored on the tape will not be
copied to the “Memory Stick Duo.”
• You cannot store a still image during using your
1.2M
256MB
512MB
1GB
370
500
1400
1750
770
1550
3150
6300
1000
2100
2900
6000
3650
7500
2GB
4300 12000 15000
8500 23500 29500
4GB
8GB
12500 17000 48000 60000
• You cannot store a still image under the
following conditions:
b Notes
• Specifications are for Sony “Memory Stick
Duo.” The actual number of recordable pictures
can vary depending on the recording
environment and the type of “Memory Stick
Duo.”
– When the shutter speed is slower than 1/50
– While using the fader
– While using smooth slow rec
– While using shot transition
– When [SCAN TYPE] is set to [25] (p. 84)
z Tips
• Image sizes of still images are as follows:
– Recording in HDV format/DVCAM (DV)
format (16:9): 1.2M
– Recording in DVCAM (DV) format (4:3):
0.9M
– Playing back in HDV format: 1.2M
– Playing back in DVCAM (DV) format (16:9):
0.2M
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the settings of your camcorder
recordings
• When you set [FOCUS MACRO] to [OFF] or
Adjusting the zoom
you cannot focus on a subject within 80 cm
(about 2 5/8 feet) regardless of the zoom
• Be sure to keep your finger on the power zoom
lever D. If you move your finger off the power
zoom lever D, the operation sound of the
power zoom lever D may also be recorded.
Using the handle zoom
1 Set the ZOOM switch E to SERVO.
2 Set the handle zoom switch B to VAR
or FIX.
z Tips
• When you set the handle zoom switch B to
VAR, you can zoom in or out at variable
speed.
• When you set the handle zoom switch B to
FIX, you can zoom in or out at fixed speed
.
Using the zoom lever
3 Press the handle zoom lever A to zoom
Set the ZOOM switch E to SERVO.
Move the power zoom lever D slightly for
a slower zoom. Move it further for a faster
zoom.
in or out.
b Notes
• You cannot use the handle zoom lever A when
the handle zoom switch B is set to OFF.
• You cannot change the zoom speed of the zoom
Wide view: (Wide angle)
lever D with the handle zoom switch B.
Using the zoom ring
You can zoom at the desired speed by
turning the zoom ring C. Fine adjustment
is also possible.
1 Set the ZOOM switch E to MANUAL.
Close view: (Telephoto)
2 Turn the zoom ring C to zoom in or
out.
z Tips
• The minimum distance required between your
camcorder and the subject for focus is about 1
cm (about 13/32 in.) for wide angle and about
80 cm (about 2 5/8 feet) for telephoto.
z Tips
• You can remove the zoom pin.
• The focus may not be adjusted at certain zoom
positions if the subject is within 80 cm (about 2
5/8 feet) from your camcorder.
Continued ,
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the settings of your camcorder recordings (Continued)
Adjusting the focus manually
Adjusting focus manually in mode A
In mode A, you can manually adjust focus
without automatic adjustment functions.
Set the focus ring to the mode A position
and focus manually using the focus scale on
the lens.
ZEBRA AE SHIFT
5
REC REVIEW
ASSIGN 1-6
buttons
4
6
ASSIGN
1
2
3
CH1
AUDIO LEVEL
b Notes
CH2
• Turn the focus ring slowly. If it is forced against
either end, the focus ring may move toward the
mode B position and move past the end, and
make noises.
Adjusting focus manually in mode B
In mode B, you can use the automatic
adjustment functions during manual focus
adjustment. Set the focus ring to the mode
B position and do the following steps.
1 Assign [FOCUS] to an ASSIGN button
Mode B
2 Press the ASSIGN button to which
[FOCUS] is assigned.
9 appears on the screen.
Mode A
Focus ring
3 Turn the focus ring to adjust the focus.
9 changes to
bring any further subject in focus. 9
changes to when you cannot bring
any closer subject in focus.
when you cannot
You can adjust the focus manually for
different recording conditions.
Use this function in the following cases.
– To record a subject behind a window covered
with raindrops.
– To record horizontal stripes.
z Tips
For manual focus
• Zoom in and bring your camcorder in focus,
then gradually zoom out.
• Fully zoom out and gradually zoom in when you
shoot a close subject.
– To record a subject with little contrast between
the subject and its background.
– When you want to focus on a subject in the
background.
To restore automatic adjustment
Press the ASSIGN button to which
[FOCUS] is assigned once again.
9 disappears and the automatic focus
adjustment is restored.
– To record a stationary subject using a tripod.
z Tips
• If you want to adjust focus automatically or use
automatic adjustment functions such as one
push auto focus during manual focus
28
Download from Www.Somanuals.com. All Manuals Search And Download.
adjustment, set the focus ring to mode B. You
cannot use the automatic adjustment functions
in mode A.
• The center of the screen is magnified by about
1.5 times when [SCAN TYPE] in [HDV
PROGRE.] or [DV PROGRE.] of the
OUT REC) menu is set to [25].
(IN/
• The screen returns to the original size when you
start recording during the expanded focus
display.
Using automatic focus temporarily
(One push auto focus)
You can use this function only in mode B.
Do steps 1 and 2 of “Adjusting focus
manually in mode B” in advance.
z Tips
• You can select a type of an expanded image
displayed during the expanded focus
([EXP.FOCUS TYPE] p. 80).
1 Assign [ONE PUSH AF] to an ASSIGN
2 Record a movie while holding the
ASSIGN button to which [ONE PUSH
AF] is assigned.
Focusing on a distant subject (Focus
infinity)
Automatic focus functions as long as
you hold the ASSIGN button (9
disappears).
b Notes
• Focus infinity is available when the focus ring is
set to the mode B position. It is not available
during the auto focus.
z Tips
1 Assign [FOCUS INFNTY] to an
• The focal distance is always displayed while
you turn the focus ring in mode A. In mode B,
the focal distance is displayed for about 3
seconds in the following cases:
– When you press the ASSIGN button to which
[FOCUS] is assigned (9 appears on the
screen).
ASSIGN button (p. 43).
2 Press the ASSIGN button to which
[FOCUS INFNTY] is assigned.
appears on the screen.
If you release the button, your camcorder
returns to the manual focus mode. This
function enables you to set focus on a distant
subject even when the focus is automatically
set on a close subject.
– When you turn the focus ring while 9 is
displayed on the screen.
The focal distance is not displayed when you
use non-Carl Zeiss lenses.
Using the expanded focus (Expanded
focus)
During standby, press the ASSIGN button
to which [EXP.FOCUS] is assigned.
[EXPANDED FOCUS] appears and the
center of the screen is magnified by about
2.0 times. It will be easier to confirm the
focus setting during manual focusing. The
screen returns to the original size when you
press the button again.
b Notes
• You cannot use the expanded focus when [REC
CTL MODE] in [EXT REC CTRL] is set to
Continued ,
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the settings of your camcorder recordings (Continued)
z Tips
Adjusting the exposure
• The F value becomes close to F2.0 as the zoom
position changes from W to T even when you
open the aperture by setting the F value lower
than F2.0, such as F1.6.
• The range of focus, an important effect of the
aperture, is called the depth of field. The depth
of field gets shallower as the aperture is opened,
and deeper as the aperture is closed. Use the
aperture creatively to obtain the desired effect in
your photography.
• This is handy for making the background
blurred or sharp.
To adjust the iris automatically
Set the IRIS switch B or
AUTO/MANUAL switch F to AUTO.
SHUTTER
WHT BAL SPEED
AUTO
MANUAL
GAIN
SEL
/
PUSH EXEC
b Notes
MENU
L
M
H
B
A
• When you set the AUTO/MANUAL switch F
to AUTO, other manually adjusted items (gain,
shutter speed, white balance) also become
automatic.
PRESET
.
Adjusting the volume of light
(ND filter)
Adjusting the iris
You can manually adjust the iris to control
the volume of the light entering the lens. By
adjusting the iris, you can change or close
the aperture of the lens, which is expressed
as an F value between F1.6 and F11. The
volume of the light increases the more that
you open the aperture (decreasing F value).
The volume of the light decreases the more
that you close the aperture (increasing F
value). The current F value appears on the
screen.
You can record the subject clearly by using
the ND filter D when the recording
environment is too bright. If you do not
want to reduce the volume of light, use the
ND filter 1. The ND filters 2, 3 and 4
reduce the volume of light to about 1/4,
1/16 and 1/64, respectively.
If the ND icon flashes during the iris
automatic adjustment, set the ND filter D
to the position that the icon indicates. The
ND icon does not flash during the manual
iris adjustment.
1 During recording or standby, set the
AUTO/MANUAL switch F to
MANUAL.
b Notes
2 Set the IRIS switch B to MAN.
• If you change the ND filters D during
recording, the movie and sound may be
distorted.
will flash when your camcorder cannot
detect the ND filter positions (1/2/3/4). Check
the ND filter position.
3 Adjust the iris with the iris ring C.
During the manual iris adjustment, you
can temporarily return to the auto iris
adjustment while holding down the
PUSH AUTO button A.
•
30
Download from Www.Somanuals.com. All Manuals Search And Download.
z Tips
range of 1/3 second through 1/10000
second or the extended clear scan
• While recording a bright subject, diffraction
may occur if you close the aperture further
down, resulting in a fuzzy focus (this is a
common phenomenon with video cameras). The
ND filter D suppresses this phenomenon and
gives better recording results.
(
).
The denominator of the set shutter speed
appears on the screen. For example,
[100] appears on the screen when you
set the shutter speed to 1/100 second.
The larger the value on the screen, the
faster the shutter speed.
Adjusting the gain
You can adjust the gain manually when you
do not want to use the AGC (automatic gain
control).
4 Press the SEL/PUSH EXEC dial G to
lock the shutter speed.
To readjust the shutter speed, do steps
2 to 4.
1 Set the AUTO/MANUAL switch F to
MANUAL during recording or standby.
z Tips
2 Set the gain switch H to H, M or L.
The gain value set for the selected gain
switch position appears on the screen.
You can set the gain value for each gain
switch position from [GAIN SETUP] of
• When recording a subject such as a monitor
screen, set the shutter speed in the extended
clear scan (
) range in order to obtain
images with no horizontal bands of noise. You
can set the shutter speed for the extended clear
scan from [ECS FREQ.] in the
the
(CAMERA SET) menu
To adjust the shutter speed
automatically
To adjust the gain automatically
Press the GAIN button I, or set the
Press the SHUTTER SPEED button E
twice, or set the AUTO/MANUAL switch
F to AUTO.
AUTO/MANUAL switch F to AUTO.
b Notes
• When you set AUTO/MANUAL switch F to
AUTO, other manually adjusted items (iris,
shutter speed, white balance) also become
automatic.
b Notes
• When you set the AUTO/MANUAL switch F
to AUTO, other manually adjusted items (iris,
gain, white balance) also become automatic.
Adjusting the shutter speed
z Tips
You can manually adjust and fix the shutter
speed. You can make a moving subject look
still or emphasize the movement of a
moving subject by adjusting the shutter
speed.
• It is difficult to focus automatically at a lower
shutter speed. Manual focusing with your
camcorder attached to a tripod is recommended.
• The picture may flicker or change colors under
fluorescent lamps, sodium lamps, or mercury
lamps. You can reduce flickering by setting the
shutter speed to an appropriate frequency in the
extended clear scan (
1 During recording or standby, set
AUTO/MANUAL switch F to
MANUAL.
) range
2 Press the SHUTTER SPEED button E.
3 Change the shutter speed displayed on
the screen by turning the SEL/PUSH
EXEC dial G.
You can adjust the shutter speed in a
Continued ,
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the settings of your camcorder recordings (Continued)
WB TEMP], which you have selected in
Adjusting to natural color (White
balance)
[WB PRESET] of the
SET) menu.
(CAMERA
Indicator
Shooting conditions
• White balance values
adjusted for light
sources can be stored
in memory A and
memory B. Follow the
steps in “To save the
adjusted white balance
A
(Memory A)
B
(Memory B)
• Recording sunset/
sunrise, just after
sunset or just before
sunrise
SHUTTER
AUTO
MANUAL
GAIN
WHT BAL SPEED
Outdoor
([OUTDOOR])
SEL
/
PUSH EXEC
MENU
L
M
H
B
A
PRESET
• Recording neon signs
or fireworks
• Under daylight color
fluorescent lamps
• Under the lighting
conditions that change
in many ways, such as
a party hall
• Under strong light
such as in a
photography studio
• Under sodium lamps
or mercury lamps
n
Indoor
([INDOOR])
You can adjust and fix the white balance
according to the lighting conditions of
recording environment. You can store white
balance values in memory A (
A) and
memory B ( B), respectively. Unless a
white balance is readjusted, values will
remain even after the power has been
turned off.
• Color temperature can
be set between 2300K
and 15000K (the
default setting is
6500K).
Color
temperature
([MANU WB
TEMP])
1
During recording or standby, set
the AUTO/MANUAL switch E to
MANUAL.
z Tips
• You can change the outdoor white balance
setting by setting offset. Press (one push)
(outdoor) is selected and
turn the SEL/PUSH EXEC dial D to select an
offset value from -7 (bluish) to 0 (normal, the
default setting) to +7 (reddish). You can also set
the white balance offset value from the menu
2
3
Press the WHT BAL button B.
button C while
Set the white balance memory
switch A to any one of PRESET/
A/B.
• You can change the color temperature. Set [WB
PRESET] to [MANU WB TEMP] and the white
balance memory switch A to PRESET, then
Select A or B for recording with the
white balance setting stored in memory
A or B. Select PRESET for recording
with the white balance setting set in
[OUTDOOR], [INDOOR] or [MANU
press the
(one push) button C. Turn the
SEL/PUSH EXEC dial D until the desired
temperature appears on the screen, then press
32
Download from Www.Somanuals.com. All Manuals Search And Download.
the dial to set the temperature. You can also set
the color temperature from the menu ([WB
2
3
Select [BLK BALANCE] in the
(CAMERA SET) menu with
the SEL/PUSH EXEC dial.
To save the adjusted white balance
value in memory A or B
1 Set the white balance memory switch to
Select [YES] with the SEL/PUSH
EXEC dial.
A (
A) or B (
B) in step 3 of
“Adjusting to natural color (White
balance).”
The black balance adjustment starts. It
will take about 15 seconds.
2 Capture a white subject, such as white
paper, full-screen in the same lighting
condition as the one in which the subject
is.
4
When [Completed.] appears on
the screen, press the MENU
button to end this menu.
3 Press
A or
(one push) button C.
B starts flashing rapidly. It
will stay on when the white balance
adjustment is completed and the
adjusted value is stored in
B.
A or
If the black balance adjustment fails
Check that the iris is closed, then try the
adjustment again.
To adjust the white balance
automatically
b Notes
Press the WHT BAL button B or set the
AUTO/MANUAL switch E to AUTO.
• When using a non-Carl Zeiss lens, close the iris
prior to the adjustment.
b Notes
Customizing the picture quality
(Picture profile)
• When you set the AUTO/MANUAL switch E
to AUTO, other manual adjustments (iris, gain,
and shutter speed) also become automatic.
Adjusting the black balance
Normally, you do not need to adjust the
black balance.
The black balance may become off in some
recording conditions.
If that happens, adjust the black balance.
The adjusted settings are stored only
temporarily. The settings return to the
default settings when you turn the power
off and back on.
SEL / PUSH EXEC
PICTURE STATUS
PROFILE CHECK
MENU
1
Press the MENU button during
standby.
A
B
Continued ,
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the settings of your camcorder recordings (Continued)
You can customize the picture quality by
adjusting picture profile items such as
[GAMMA] and [DETAIL].
Connect your camcorder to a TV or
monitor, and adjust the picture quality
while observing the picture on the TV or
monitor screen.
Picture quality settings for different
recording conditions are stored in [PP1]
through [PP6] as default settings.
2
3
Select a picture profile number
with the SEL/PUSH EXEC dial A.
You can record with the settings of the
selected picture profile.
Select [OK] with the SEL/PUSH
EXEC dial A.
b Notes
• When you set [x.v.Color] to [ON], the picture
profile will be disabled.
To cancel the picture profile recording
Picture profile
number (setting
name)
Select [OFF] in step 2 with the SEL/PUSH
EXEC dial A.
Recording condition
To change the picture profile
You can change the settings stored in [PP1]
through [PP6].
PP1
:USER
Default settings the same
as when Picture Profile is
[OFF]
PP2
:USER
Default settings the same
as when Picture Profile is
[OFF]
1 Press the PICTURE PROFILE button
B.
2 Select the PICTURE PROFILE number
with the SEL/PUSH EXEC dial A.
PP3
Example settings of
:PRO COLOR pictures recorded by a
professional shoulder
camcorder with ITU709
gamma
3 Select [SETTING] with the SEL/PUSH
EXEC dial A.
4 Select an item to be adjusted with the
SEL/PUSH EXEC dial A.
PP4
Example settings of
pictures recorded by a
professional handy
camcorder with PD
gamma
5 Adjust the picture quality with the SEL/
:PD COLOR
PUSH EXEC dial A.
6 Repeat steps 4 and 5 to adjust other
items.
7 Select [ RETURN] with the SEL/
PP5
Example settings of
PUSH EXEC dial A.
:FILM LOOK1 pictures recorded on
cinema color negative film
8 Select [OK] with the SEL/PUSH EXEC
dial A.
PP6
Example settings of
A picture profile indicator appears.
:FILM LOOK2 pictures screened with
cinema color print film
z Tips
• You can assign picture profiles to the ASSIGN
buttons and use them to turn the picture profiles
1
During standby, press the
PICTURE PROFILE button B.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
BLACK LEVEL
To set the black level.
Item
Description and settings
[MASTER BLACK]
Sets the master black level.
-15 to +15
[BLACK R]
[BLACK G]
[BLACK B]
Sets the black level of Rch.
[MASTER BLACK] + [BLACK R] is the black level of Rch.
-15 to +15
Sets the black level of Gch.
[MASTER BLACK] + [BLACK G] is the black level of Gch.
-15 to +15
Sets the black level of Bch.
[MASTER BLACK] + [BLACK B] is the black level of Bch.
-15 to +15
GAMMA
To select a gamma curve.
Item
Description and settings
[STANDARD]
[CINEMATONE1]
[CINEMATONE2]
[ITU709]
Standard gamma curve
Gamma curve 1 for producing tone of film camera images
Gamma curve 2 for producing tone of film camera images
Gamma curve that corresponds to ITU-709. Gain in low intensity area:
4.5
[G5.0]
[PD]
Gamma curve with 5.0 of a low intensity area gain
Gamma curve for producing tone similar to DCR-PD series
Gamma curve similar to x.v.Color
[x.v.]
BLACK GAMMA
To correct gamma in low intensity area.
Item
Description and settings
[RANGE]
Selects a correcting range.
HIGH / MIDDLE / LOW
[LEVEL]
Sets the correcting level.
-7 (maximum black compression) to +7 (maximum black stretch)
Continued ,
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the settings of your camcorder recordings (Continued)
KNEE
To set knee point and slope for video signal compression to reduce over-highlighting by
limiting signals in high contrast area of the subject to the dynamic range of your camcorder.
Item
Description and settings
[MODE]
Selects a mode either automatic or manual.
[AUTO]
: to set the knee point and slope automatically.
[MANUAL] : to set the knee point and slope manually.
[AUTO SET]
Sets the maximum point and sensitivity in the automatic mode.
[MAX POINT]
: Sets the maximum point.
90% ~ 100%
[SENSITIVITY] : Sets the sensitivity.
HIGH/MIDDLE/LOW
[MANUAL SET]
Sets the knee point and slope manually.
[POINT]
: Sets the knee point.
75% ~ 105%
[SLOPE]
: Sets the knee slope.
-5(gentle) ~ +5(steep)
COLOR MODE
To set type and level of colors.
Item
Description and settings
Selects a type of colors
[STANDARD] : Standard colors
[TYPE]
[CINEMATONE1] : Film camera image-like colors good with
[GAMMA] set to [CINEMATONE1]
[CINEMATONE2] : Film camera image-like colors good with
[GAMMA] set to [CINEMATONE2]
[ITU709 MTX]
: Colors corresponding to ITU-709
[LEVEL]
Sets a color level when you set [TYPE] to the settings other than
[STANDARD].
1 (close to color settings of [STANDARD]) - 8 (color settings of the
selected type)
COLOR LEVEL
To set the color level.
Item
Description and settings
-7 (light) to +7 (dark), -8: black and white
COLOR PHASE
To set the color phase.
Item
Description and settings
-7 (greenish) to +7 (reddish)
36
Download from Www.Somanuals.com. All Manuals Search And Download.
COLOR DEPTH
To set the color depth for each color phase.
This function is more effective for deep colors and less effective for light colors. The color
looks deeper as you decrease the setting value to more negative side, and lighter as you
increase the value to more positive side. This function is effective even if you set [COLOR
LEVEL] to [-8] (monotone).
Item
[R]
[G]
[B]
[C]
[M]
[Y]
Description and settings
-7 to +7 (depth of red)
-7 to +7 (depth of green)
-7 to +7 (depth of blue)
-7 to +7 (depth of cyan)
-7 to +7 (depth of magenta)
-7 to +7 (depth of yellow)
COLOR CORRCT
To set items for the color correction.
Item
Description and settings
Selects color correction type.
[TYPE]
[OFF]
: Not correct colors.
[COLOR REVISN] : Corrects colors stored in memory. Colors not
stored in memory (displayed in black and
white when [COLOR EXTRCT] is set) will
not be corrected.
[COLOR EXTRCT] : Displays areas in colors that are stored in the
memory. The other areas are displayed in
black and white. You can use this function to
add effects on your movies or to confirm the
colors to be stored in the memory.
[MEMORY SEL]
Selects a memory to be effective.
[1]: Sets Memory 1 to be effective.
[2]: Sets Memory 2 to be effective.
[1&2]: Sets both Memory 1 and 2 to be effective.
Continued ,
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the settings of your camcorder recordings (Continued)
COLOR CORRCT (Continued)
Item
Description and settings
[MEM1 COLOR]
Sets colors stored in Memory 1.
[PHASE]
: Sets color phase.
0 (purple) t 8 (red) t 16 (yellow) t
24 (green) t 31 (blue)
: Sets color phase range.
[RANGE]
0 (no color selection), 1 (narrow: to select only a
single color) to 31 (wide: to select multiple colors
in similar color phase)
[SATURATION] : Sets saturation.
0 (to select from light colors to dark colors) to 31
(to select dark color)
[ONE PUSH SET]: Automatically sets [PHASE] for a subject at the
center of the marker. [SATURATION] is set to 0.
[MEM1 REVISN]
Corrects colors in Memory 1.
[R GAIN]
: Corrects the redness of the color in Memory 1. Tone of
cyan becomes higher as the redness decreases.
-15 (less reddish) to +15 (more reddish)
0 for no correction
[B GAIN]
: Corrects the blueness of the color in Memory 1. Tone
of yellow becomes higher as the blueness decreases.
-15 (less bluish) to +15 (more bluish)
0 for no correction
[MEM2 COLOR]
[MEM2 REVISN]
Sets colors stored in Memory 2.
See [MEM1 COLOR] for description and settings.
Corrects colors in Memory 2.
See [MEM1 REVISN] for description and settings.
WB SHIFT
To set items for the white balance shift.
Item
Description and settings
Selects a color filter type for the white balance shift.
[FILTER TYPE]
[LB-CC]
[R-B]
: Film type (color conversion and correction)
: Video type (correction of R and B levels)
[LB[COL TEMP]]
[CC[MG/GR]]
[R GAIN]
Sets a color temperature offset value.
-9 (bluish) to +9 (reddish)
Sets a color correct offset value.
-9 (greenish) to +9 (magentish)
Sets an R level.
-9 (low R level) to +9 (high R level)
[B GAIN]
Sets a B level.
-9 (low B level) to +9 (high B level)
38
Download from Www.Somanuals.com. All Manuals Search And Download.
DETAIL
To set items for the detail.
Item
Description and settings
[LEVEL]
Sets the detail level.
-7 to +7
[MANUAL SET]
[ON/OFF]
[ON]
: Turns on and off the manual detail adjustment.
: Enables the manual detail adjustment (automatic
optimization will not be performed).
[OFF]
: Disables the manual detail adjustment.
[V/H BALANCE] : Sets the horizontal (H) and vertical (V) balance of
detail.
[B/W BALANCE]: Selects the balance of the upper DETAIL (P) and
the lower DETAIL (N).
TYPE 1 (off to the lower DETAIL (N) side) to
TYPE 5 (off to the upper DETAIL (P) side)
[BLACK LIMIT] : Sets the limit level of the lower DETAIL (N).
0 (Low limit level: likely to be limited) to 7 (High
limit level: not likely to be limited)
[WHITE LIMIT] : Sets the limit level of the upper DETAIL (P).
0 (Low limit level: likely to be limited) to 7 (High
limit level: not likely to be limited)
[CRISPENING] : Sets the crispening level.
0 (shallow crispening level) to 7 (deep crispening
level)
[HI-LIGHT DTL] : Sets the DETAIL level in the high intensity areas.
-2 to +2
Continued ,
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the settings of your camcorder recordings (Continued)
SKINTONE DTL
To adjust the detail of skintone areas to reduce wrinkles.
Item
Description and settings
[ON/OFF]
Suppresses details in skin-tone areas to reduce wrinkles. Select [ON]
when you want to use this function. You can also select other areas.
[LEVEL]
Sets the adjustment level.
1 (less adjust the detail) to 8 (more adjust the detail)
[COLOR SEL]
Sets color items for the detail adjustment.
[PHASE]
: Sets the color phase.
0 (purple) t 32 (red) t 64 (yellow) t
96 (green) t 127 (blue)
: Sets the color range.
[RANGE]
0 (selects no color), 1 (narrow: selects a single
color) to 31 (wide: selects multiple colors in
similar color phases and saturation)
The detail will not be adjusted when you set
[RANGE] to 0.
[SATURATION] : Sets the color saturation.
0 (selects a light color) to 31 (selects a deep color)
[REVERSE]
: Reverses the selected color range.
If you execute this function when a color has been
selected, colors that were not selected will be
selected instead.
[Y LEVEL]
[Y RANGE]
: Sets the color brightness.
0 (selects a dark color) to 31 (selects a brigh
color)
: Sets the color brightness range.
1 (narrows the brigtness range) to 32 (expands the
brighness range)
[ONE PUSH SET]: Automatically adjusts [PHASE],
[SATURATION] and [Y LEVEL] for a subject at
the center of the marker. [RANGE] and
[Y RANGE] will not be changed.
PROFILE NAME
COPY
To copy the settings of the picture profile to another picture profile number.
RESET
To reset the picture profile to the default setting.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Select the number of the picture profile
that you want to copy to with the SEL/
PUSH EXEC dial A.
To name the picture profile settings
You can name picture profile1 through 6.
1 Press the PICTURE PROFILE button
5 Select [YES] with the SEL/PUSH
B.
EXEC dial A.
2 Select the picture profile that you want
to name with the SEL/PUSH EXEC dial
A.
6 Select [ RETURN] t [OK] with the
SEL/PUSH EXEC dial A.
3 Select [SETTING] t [PROFILE
NAME] with the SEL/PUSH EXEC dial
A.
To reset the picture profile settings
You can reset the picture profile settings by
each picture profile number. You cannot
reset all picture profile settings at once.
4 Select a letter with the SEL/PUSH
EXEC dial A. Repeat this operation
until a complete name is entered.
1 Press the PICTURE PROFILE button
B.
PICT. PROFILE
2 Select the number of the picture profile
that you want to reset with the SEL/
PUSH EXEC dial A.
3 Select [SETTING] t [RESET] t
CANCEL
OK
[YES] t [
RETURN] t [OK]
P I CTURE PROF I LE END
with the SEL/PUSH EXEC dial A.
z Tips
Adjusting the volume
• Each name can be up to 12 characters long.
Characters that can be used in profile
names:
• A to Z
• 0 to 9
You can adjust the volume of a microphone
connected to the INPUT1/INPUT2 jack.
z Tips
• - _ / #
& : .
@
microphone and on the REC CH SELECT
switch.
5 Select [OK] with the SEL/PUSH EXEC
dial A.
The profile name is changed.
INPUT2 INPUT1
LINE
MIC
MIC
LINE
MIC
MIC
6 Select [
RETURN] t [OK] with
the SEL/PUSH EXEC dial A.
To copy the picture profile setting to
other picture profiles
1 Press the PICTURE PROFILE button
B.
2 Select the picture profile that you want
to copy from with the SEL/PUSH
EXEC dial A.
3 Select [SETTING] t [COPY] with
A
SEL/PUSH EXEC dial A.
B
Continued ,
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing the settings of your camcorder recordings (Continued)
1
2
Set the AUDIO LEVEL switch
(CH1/CH2) A of the channel to be
adjusted to MAN.
appears on the screen.
Turn the AUDIO LEVEL dial B to
adjust the volume during
recording or standby.
To restore automatic adjustment
Set the AUDIO LEVEL switch (CH1/CH2) A of
the manually adjusted channel to AUTO.
b Notes
• When you use a microphone that does not
support the MIC+48V, set the INPUT1/INPUT2
switch to MIC. If you use it with the INPUT1/
INPUT2 switch set to MIC+48V, it may be
damaged or the recorded sound may be
distorted.
z Tips
• For other settings, see the
(AUDIO SET)
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Assigning the functions to the ASSIGN buttons
• PHOTO (p. 26)
Some functions need to be assigned to the
ASSIGN buttons for use. You can assign a
single function to any one of the ASSIGN 1
to 6 buttons on the body or the L1, L2 and
RET buttons on the lens.
b Notes
L1 button
ASSIGN 4-6 buttons
• The following functions cannot be assigned to
the RET button.
– FOCUS (for changing between automatic
focus and manual focus)
ZEBRA AE SHIFT REC REVIEW
4
5
6
– ONE PUSH AF
– FOCUS INFNTY
– FOCUS MACRO
– STEADYSHOT
SEL
/
PUSH EXEC
PIC
PR
MENU
ASSIGN
1
z Tips
• The RET button is an assignable button on non-
Carl Zeiss lenses.
ASSIGN 1-3
buttons
2
3
A
B
Functions you can assign to the
ASSIGN buttons
The buttons in parentheses indicate that the
functions are assigned to the buttons by
default.
• EXP.FOCUS (p. 29) (L2 button)
• ONE PUSH AF (p. 29)
L2 button
• FOCUS MACRO (p. 72)
• HYPER GAIN (p. 69)
• INDEX MARK (p. 44)
1
2
Press the MENU button B.
Select the
(OTHERS) t
[ASSIGN BTN] with the SEL/PUSH
EXEC dial A.
• BACK LIGHT (p. 71)
• SPOTLIGHT (p. 71)
• FADER (p. 72)
3
Select [CAMERA] or [LENS],
whichever the ASSIGN button to
which you want to assign a
function is located, with the SEL/
PUSH EXEC dial A.
• LAST SCN RVW (p. 45)
button)
• END SEARCH (p. 45)
• MARKER (p. 80)
• PEAKING (p. 79)
Continued ,
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Assigning the functions to the ASSIGN buttons (Continued)
Recording an index signal
4
Select the ASSIGN button to
which you want to assign a
function with the SEL/PUSH
EXEC dial A.
• You can select the ASSIGN 1 through 6
buttons on the body and the L1, L2 and RET
button on the lens.
If you record a scene with an index signal,
you can easily find that scene during
The index function will make it easier to
check the transition of recording or edit
your pictures using index signals.
•
[------] appears if no function is assigned to
the ASSIGN button.
1
2
Assign [INDEX MARK] to one of
the ASSIGN buttons (p. 43).
5
Select the function that you want
to assign with the SEL/PUSH
EXEC dial A.
Press the ASSIGN button to
which [INDEX MARK] is assinged.
During recording
6
7
8
Select [OK] with the SEL/PUSH
EXEC dial A.
appears for about 7 seconds and an
index signal is recorded.
During standby
flashes.
Select [RETURN] with the SEL/
PUSH EXEC dial A.
After you press the REC START/STOP
button to start recording,
for about 7 seconds and an index signal
is recorded.
appears
Press the MENU button B to hide
the menu screen.
To cancel the operation
Press the ASSIGN button to which [INDEX
MARK] is assigned again before you start
recording.
b Notes
• You cannot record an index signal on a recorded
tape afterward.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
• End search will not work correctly if a blank
section exists between recorded sections on the
tape.
Reviewing the most recently
recorded scenes (Rec review)
You can view about 2 seconds of the scene
recorded just before you stopped the tape.
This is convenient during playback of the
latest scene check.
Playing back the most recently
recorded movies (Last scene
review)
You can set your camcorder to
automatically rewind the tape to the
beginning of the most recently recorded
scene, play back to the end of the scene,
then stop the tape.
Press the REC REVIEW button or the
ASSIGN button to which [REC
REVIEW] is assigned during
standby.
The last 2 seconds (approx.) of the most
recently recorded scenes will be played
back, then your camcorder returns to
standby.
1
2
Assign [LAST SCN RVW] to an
ASSIGN button (p. 43).
During standby, press the
ASSIGN button to which [LAST
SCN RVW] is assigned.
Searching for the last scene of
the most recent recording
(End search)
The last scene review starts.
b Notes
1
2
Assign [END SEARCH] to one of
the ASSIGN buttons (p. 43).
• If the recording time of the movie is short,
[LAST SCN RVW] may not work correctly.
z Tips
• If you press the ASSIGN button again during
the last scene review, your camcorder plays
back the last 5 seconds of the most recently
recorded movie, then goes standby at the end of
the recording.
Press the ASSIGN button to
which [END SEARCH] is
assigned.
The last scene of the most recent
recording will be played back for about
5 seconds, and the camcorder goes
standby at the point where the last
recording has finished.
b Notes
• End search will not work once you eject the
tape.
Continued ,
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Shot transition
You can store settings of focus, zoom, iris,
gain, shutter speed and white balance, and
smoothly shift from the current settings to
the stored settings (shot transition).
For example, you can shift the focus from
closer objects to farther objects, or change
the depth of field by adjusting the iris. You
can also develop scenes under different
conditions smoothly. If you store manually
adjusted settings of white balance, you can
smoothly shift from one scene to another
under different conditions, such as from
indoor to outdoor.
Item
Description and settings
REC LINK
Setting of transition
linked with start of
recording (the default
setting is [OFF])
[OFF]: Not to start
transition when the
recording is started.
[SHOT-A]: To start
transition to the SHOT-A
when the recording is
started.
[SHOT-B]: To start
transition to the SHOT-B
when the recording is
started.
Sony recommends that you use a tripod to
avoid image blurring.
You can set the following items in [SHOT
TRANSITION] of the
(CAMERA
FOCUS TRANS Setting ([ON]/[OFF]) of
focus transition (the
Item
Description and settings
default setting is [ON])
TRANS TIME
Setting of transition time
(the default setting is
[4.0sec])
ZOOM TRANS Setting ([ON]/[OFF]) of
zoom transition (the
default setting is [ON])
You can set the transition
time by 0.5 sec between
[3.5sec] and [15.0sec], or
select from [20sec],
[30sec], [45sec] and
[60sec].
IRIS TRANS
Setting ([ON]/[OFF]) of
iris transition (the default
setting is [ON])
b Notes
• You cannot manually adjust the focus, zoom,
iris, gain, shutter speed and white balance while
the CHECK or EXEC lamp is on. You can
manually adjust the focus, zoom and iris, even
the CHECK or EXEC lamp is on when you set
[FOCUS TRANS], [ZOOM TRANS] and [IRIS
TRANS] to [OFF], respectively.
START TIMER Setting of timer to start
shot transition (the
default setting is [OFF])
You can select from
[5sec], [10sec] and
[20sec].
• When [EXT REC CTRL] is set to [EXT
ONLY], setting [REC LINK] (linked recording)
to [SHOT-A] or [SHOT-B] links the start of
transition to the start of recording on an external
device (HVR-MRC1 or HVR-DR60).
46
Download from Www.Somanuals.com. All Manuals Search And Download.
A
4
Press the SHOT TRANSITION/
FOCUS MARKING button C
again to bring up the shot
transition check screen.
The CHECK lamp turns on.
Press the A button to check SHOT-A, or
the B button to check SHOT-B. The
image will be displayed with the
settings stored in the selected SHOT.
The focus, zoom, iris, gain, shutter
speed and white balance are
B
A button
C
automatically adjusted to the stored
settings.
CHECK
STORE EXEC
A
B
SHOT TRANSITION/FOCUS MARKING
b Notes
• The settings do not shift to the stored
settings with the transition time set in
B button
1
2
Set [S.TRANS/F.MARK] of the
(CAMERA SET) menu to
[SHOT TRANSITION].
5
6
Press SHOT TRANSITION/FOCUS
MARKING button C again to
bring up the shot transition
execution screen.
Press the SHOT TRANSITION/
FOCUS MARKING button C to
bring up the shot transition store
screen.
The EXEC lamp turns on.
Press the REC START/STOP
button A (or B) .
The STORE lamp turns on.
Press the A button for recording with
SHOT-A, or the B button for recording
with SHOT-B.
3
Press the A button to store the
settings in SHOT-A, or the B
button to store the settings in
SHOT-B.
The settings shift from the current ones
to the stored ones.
b Notes
b Notes
• The settings stored in SHOT-A or
SHOT-B will be erased when you set
the POWER switch to OFF.
• When you change [SHOT TRANSITION]
MARKING button repeatedly to exit the shot
transition screen.
• You cannot return from the stored SHOT-A or
SHOT-B settings to previous settings after you
execute the shot transition during recording.
Continued ,
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Shot transition (Continued)
• If you press the following buttons during the
shot transition operation, the operation will be
canceled:
– PICTURE PROFILE
– MENU
– STATUS CHECK
– EXPANDED FOCUS
• You can also make a transition from the SHOT-
A to the SHOT-B or from the SHOT-B to the
SHOT-A. For example, to make a transition
from the SHOT-A to the SHOT-B, display the
shot transition check screen, press the A button
to bring up the SHOT-A and press the REC
START/STOP button. Then, display the shot
transition execution screen and press the B
button.
• You can rehearse the shot transition by pressing
the respective buttons (A or B) to which your
customized settings are assigned before pressing
the REC START/STOP button in step 6.
• The settings stored in the memory (SHOT-A/
SHOT-B) are cleared when you remove the Carl
Zeiss lens, or you adjust the flange focal length.
To cancel the operation
Press the SHOT TRANSITION/FOCUS
MARKING button C repeatedly to exit
the shot transition screen.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Marking focal point on the screen
(Focus marking)
You can mark a focal point, at which you
set a subject in focus, on the LCD screen
prior to the recording. You can use this
function during the manual focus.
button for marking a focal point at
position B.
When you press the A button, V and A
appear on the focus marking bar. When
you press the B button, v and B appear
on the focus marking bar.
This mark appears when
you press the B button.
Current focal point
60min
STBY 00:01:01:19
FOCUS MARKING
A
A button
CHECK
STORE
EXEC
A
B
This mark appears when
you press the A button.
B button
B
SHOT TRANSITION/FOCUS MARKING
The color of the marks changes when
position A or B matches the current
focal point.
1
2
Set [S.TRANS/F.MARK] of the
(CAMERA SET) menu to
[FOCUS MARKING].
b Notes
Press the SHOT TRANSITION/
FOCUS MARKING button B.
• The focus marking function does not work when
[FOCUS MACRO] is set to [ON].
The focus marking bar appears at the
bottom of the screen.
• You cannot use the focus marking when you use
a non-Carl Zeiss lens. Marking positions A and
B will be cleared when you dismount the lens or
turn off the power.
3
4
Adjust the focus by turning the
focus ring A and set a focal
point.
z Tips
• You can use the focus marking function during
the expanded focus.
A cursor on the focus marking bar
moves as you turn the focus ring.
Press the A button for marking a
focal point at position A or the B
Continued ,
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback
VOLUME/MEMORY button
PLAY button
TC/U-BIT DATA CODE
MEMORY/PLAY button
MEMORY/INDEX button
MEMORY/DELETE button
SEL/PUSH EXEC dial
You can play back movies as follows:
1
Slide the POWER switch to VCR while pressing the green button.
Slide the POWER
switch while pressing
the green button.
2
Start playing back.
Press m (rewind) to go to the point you want to view, then press N (play) to start
playback.
• x : STOP
• X : PAUSE (Press N or X again to restart the playback)
• m : REW
(Rewind, review)
• M : FF (Cue, fast forward)
• y : SLOW
b Notes
• Your camcorder automatically goes into a stopped state when it is in pause for more than 3 minutes.
• The screen may temporarily go blank losing images and sound when signals switch between HDV
and DVCAM (DV) during playback of a tape in which HDV format and DVCAM (DV) format are
mixed.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
• You cannot play back movies recorded in HDV format on DVCAM (DV) format video cameras or
mini DV players.
• You can play back a DV format tape on your camcorder only when its contents are recorded in the SP
mode. You cannot play back movies recorded on the DV format tape in the LP mode.
• Time code and user bits will not be displayed correctly when you play back a tape with no time code
or user bit data, or a tape with time code that your camcorder does not support.
z Tips
To search for a scene while viewing a movie
Press and hold m/M during playback (Picture Search). To view during fast forward, press
and hold M. To view during rewind, press and hold m (Skip Scan).
To adjust the volume
Adjust the volume with the VOLUME/MEMORY button.
To view still images
1 Set the POWER switch to VCR.
2 Press the MEMORY/PLAY button.
3 Select still image that you want to view using the VOLUME/MEMORY button.
To stop viewing still images, press the MEMORY/PLAY button again.
To display the list of still images (index screen)
1 Set the POWER switch to VCR.
2 Press the MEMORY/INDEX button.
101–0050
101
1/19
3 Select a still image using the VOLUME/MEMORY button.
To display a single image, move B to that image and press the MEMORY/PLAY button.
To stop displaying the list of still images, press the MEMORY/INDEX button again.
To delete still images from the “Memory Stick Duo”
1 Do the steps of “To view still images” to display still images that you want to delete.
2 Press the MEMORY/DELETE button.
3 Select [YES] with the SEL/PUSH EXEC dial.
The still image will be deleted.
Continued ,
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Playback (Continued)
b Notes
• Still images cannot be restored once you delete them.
• You cannot delete still images when the “Memory Stick Duo” is write-protected (p. 119) or the still image
z Tips
• To delete a still image in the index, move B to the still image using the VOLUME/MEMORY button,
then do steps 2 and 3.
• To delete all still images, do [
ALL ERASE] of the
(MEMORY SET) menu (p. 89).
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing/checking the settings in your
camcorder
• When you assign [DISPLAY] of [ASSIGN
BTN] to an ASSIGN button, you can use the
ASSIGN button to change the screen.
Displaying recording data (Data
code)
TC/U-BIT DATA CODE
B
You can display information, including
date, time and camera data, automatically
stored during recording on the screen
during playback.
A
1
2
Set the POWER switch E to VCR.
Press the DATA CODE button B
during playback or pause.
The screen changes (date and time
display t camera data display t no
display) as you press the button.
SEL / PUSH EXEC
PICTURE STATUS
PROFILE CHECK
MENU
E
D
C
Changing the screen
You can turn on and off the display of the
time code, tape counter, and other
information on the screen.
Press the DISPLAY/BATT INFO
button A.
A SteadyShot off
The screen indicators turn on (displayed)
and off (not displayed) as you press the
button.
When the POWER switch is set to
CAMERA, the screen changes (detailed
display t simple display t no display) as
you press the button.
B Exposure
appears during playback of the
movie recorded with the iris, gain and
shutter speed automatically adjusted.
appears during playback of the
movie recorded with the iris, gain and
shutter speed manually adjusted.
z Tips
• You can display the screen indicators during
playback on a TV. Select [V-OUT/PANEL] of
Continued ,
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing/checking the settings in your camcorder (Continued)
C Iris
appears in the iris value display
1
2
Press the STATUS CHECK button
C.
area during playback of the movie
recorded with the iris manually adjusted
to its maximum value.
D Gain
Turn the SEL/PUSH EXEC dial D
until a desired display shows up
on the screen.
E Shutter speed
F White balance
When the POWER switch E is set to
CAMERA, the display changes in the
following sequence:
appears during playback of the
movie recorded with the shot transition
or [MANU WB TEMP].
AUDIO t OUTPUT t ASSIGN t
CAMERA t EXT DEVICE (when an
external device is connected)
b Notes
When the POWER switch E is set to
VCR, the display changes in the
following sequence:
• The exposure correction value (0EV), shutter
speed and iris will be displayed during viewing
of still images on “Memory Stick Duo.”
• Date and time will be displayed in the same area
when you select the date and time display. If
you record without setting date and time, [-- --
----] and [--:--:--] will be displayed.
AUDIO t OUTPUT t ASSIGN t
EXT DEVICE (when an external device
is connected)
• An accurate shutter speed may not be displayed
when you play back a tape recorded with your
camcorder on another device. Check the data
code that is displayed on the screen when you
play back the tape on your camcorder for the
accurate shutter speed.
To hide the display
• Press the STATUS CHECK button C.
• A shutter speed is indicated with [---] during
playback of the movie recorded with the
Checking the remaining battery
(Battery Info)
extended clear scan (
).
Set the POWER switch E to OFF, then
press the DISPLAY/BATT INFO button
A. The approximate recordable time in the
selected format and battery information
appear for about 7 seconds. You can view
the battery information for up to 20 seconds
by pressing the button again while the
information is displayed.
Displaying the settings in your
camcorder (Status check)
You can check the settings of the following
items.
• Audio setup such as microphone volume level
• Output signal setup ([VCR HDV/DV], etc.)
Remaining battery (approx.)
• Functions assigned to the ASSIGN buttons
• Camera setup (p. 69)
• External devices
60
65
Recording capacity (approx.)
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Locating a scene on a tape
To cancel the operation
Press the STOP button C on the Remote
Commander.
b Notes
•
Each day of recording must be longer than 2
minutes. Your camcorder may not detect the
date if the recording of that date is short.
A
B
• The date search may not work properly if a
blank section exists on the tape.
C
Searching for a recording start
point (Index search)
You can search scenes by indexes recorded
b Notes
Remote Commander.
1
2
Set the POWER switch to VCR.
Searching for a scene by date of
recording (Date search)
Press the SEARCH M. button A
on the Remote Commander
repeatedly to select [INDEX
SEARCH].
You can search scenes by recording dates.
1
2
Set the POWER switch to VCR.
3
Press the . (previous)/>
(next) button B on the Remote
Commander to select an index
point.
Press the SEARCH M. button A
on the Remote Commander
repeatedly to select [DATE
SEARCH].
You can select an index previous or next
to the index of the current tape position.
Playback automatically starts from the
scene marked by the index.
3
Press the . (previous)/>
(next) button B on the Remote
Commander to select a recording
date.
You can select a date previous or next to
the date of the current tape position.
Playback automatically starts from the
scene recorded on the selected date.
Continued ,
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Locating a scene on a tape (Continued)
To cancel the operation
Press the STOP button C on the Remote
Commander.
b Notes
• Recording between indexes must be longer than
2 minutes. Your camcorder may not detect the
date if the recording between the indexes is
short.
• The index search may not work properly if a
blank section exists on the tape.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing the picture on a TV
Connection methods and image quality differ depending on what type of TV is connected and
connectors used.
Refer also to the instruction manuals supplied with the device to be connected.
Jacks on your camcorder
Open the jack cover and connect the cable.
2
3
1
4
b Notes
• Set all the necessary menu items before you connect your camcorder to a TV. If you change the settings of
[VCR HDV/DV] or [i.LINK SET] after connecting your camcorder to the TV with an i.LINK cable, the
TV may not recognize video signals properly.
Connecting to a high definition TV
A movie recorded in HD quality is played back in HD quality.
A movie recorded in SD quality is played back in SD quality.
COMPONENT IN
AUDIO
i.LINK
(for HDV1080i)
HDMI
A
B
C
Continued ,
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing the picture on a TV (Continued)
: Signal flow, ( ): Reference pages
Type Camcorder
Cable
TV
Menu Setting
(IN/OUT REC)
[VCR HDV/DV] t
[VIDEO OUT] t
[COMPONENT] t
[1080i/576i] (85)
A
Component video cable
(supplied)
3
(Green) Y
(Blue) PB/CB
(Red) PR/CR
A/V connecting cable
(supplied)
4
(White)
(Red)
(Yellow)
b Notes
• When you only connect a component video cable, audio signals are not outputted. An A/V connecting
cable is also needed to output audio signals. Connect the white and red plugs of the A/V connecting cable
to the audio input jack of your TV.
(IN/OUT REC)
[VCR HDV/DV] t
HDMI
IN
B
1
HDMI cable (optional)
b Notes
• Use an HDMI cable with the HDMI logo.
• Pictures in the DVCAM (DV) format are not output from the HDMI OUT jack, if copyright protection
signals are recorded in the pictures.
• Your TVs may not function correctly (for example, no sound or image). Do not connect the HDMI OUT
jack of your camcorder and HDMI OUT jack of the external device with the HDMI cable. This may cause
a malfunction.
z Tips
• HDMI (High-Definition Multimedia Interface) is an interface to send both video and audio signals.
Connecting HDMI OUT jack to an external device supplies high quality images and digital audio to you.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
: Signal flow, ( ): Reference pages
Type Camcorder
Cable
TV
Menu Setting
(IN/OUT REC)
[VCR HDV/DV] t
C
2
i.LINK cable (optional)
[i.LINK SET] t [HDV
t DV CONV] t [OFF]
(86)
b Notes
• Your TV needs to have an i.LINK jack compatible with HDV1080i. For details, confirm the
specifications of your TV.
• If your TV is not compatible with HDV1080i, connect your camcorder and TV with the supplied
component video cable and A/V connecting cable as illustrated in
.
• The TV needs to be set so that it recognizes that the camcorder is connected. Refer to the instruction
manuals supplied with your TV.
• This camcorder has a 6-pin i.LINK terminal. Select a cable that fits the terminal on the TV to be attached.
Continued ,
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing the picture on a TV (Continued)
Connecting to a 16:9 (wide) or 4:3 TV
A movie recorded in HD quality is converted and played
back in SD quality. A movie recorded in SD quality is played
back in SD quality.
COMPONENT IN
AUDIO
VIDEO/AUDIO
S VIDEO
i.LINK
VIDEO/AUDIO
D
E
F
G
To set the aspect ratio according to the connected TV (16:9/4:3)
Set the down-convert setting as follows:
For HDV format signals:
(IN/OUT REC) menu t [VIDEO OUT] t [DOWN CONVERT]
For DV format signals:
(IN/OUT REC) menu t [VIDEO OUT] t [DV WIDE CONV]
z Tips
• When your TV is monaural (When your TV has only one audio input jack), connect the yellow plug of the
A/V connecting cable to the video input jack and connect the white (left channel) or the red (right
channel) plug to the audio input jack of your TV or VCR. When you want to play back the sound in
monaural mode, use a connecting cable for that purpose.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
: Signal flow, ( ): Reference pages
Type Camcorder
Cable
TV
Menu Setting
(IN/OUT REC)
[VCR HDV/DV]
[VIDEO OUT]
t[COMPONENT]
[VIDEO OUT]
D
Component video cable
(supplied)
3
4
(Green) Y
(Blue) PB/CB
(Red) PR/CR
t[DOWN CONVERT]
A/V connecting cable
(supplied)
t[SQUEEZE]/
(White)
(Red)
[LETTER BOX]/[EDGE
(Yellow)
b Notes
• When you only connect a component video cable, audio signals are not outputted. An A/V connecting
cable is also needed to output audio signals. Connect the white and red plugs of the A/V connecting cable
to the audio input jack of your TV.
(IN/OUT REC)
[VCR HDV/DV] t
E
[i.LINK SET] t [HDV
2
i.LINK cable (optional)
t DV CONV] t [ON]
(86)
b Notes
• The TV needs to be set so that it recognizes that the camcorder is connected. Refer to the instruction
manuals supplied with your TV.
• This camcorder has a 6-pin i.LINK terminal. Select a cable that fits the terminal on the TV to be attached.
* Change the settings according to the TV connected.
Continued ,
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing the picture on a TV (Continued)
: Signal flow, ( ): Reference pages
Type Camcorder
Cable
TV
Menu Setting
(IN/OUT REC)
[VCR HDV/DV] t
[VIDEO OUT] t
[DOWN CONVERT] t
[SQUEEZE]/[LETTER
BOX]/[EDGE CROP]*
(85)
A/V connecting cable with
S VIDEO (optional)
4
(White)
(Red)
(Yellow)
b Notes
• When connecting only an S VIDEO plug (S VIDEO channel), audio signals are not output. To output
audio signals, connect the white and red plugs of the A/V connecting cable with an S VIDEO cable to the
audio input jack of your TV.
• This connection produces higher resolution pictures compared with the A/V connecting cable (Type
).
A/V connecting cable
(supplied)
(IN/OUT REC)
[VCR HDV/DV] t
[VIDEO OUT] t
[DOWN CONVERT] t
[SQUEEZE]/[LETTER
BOX]/[EDGE CROP]*
(85)
4
(Yellow)
(White)
(Red)
* Change the settings according to the TV connected.
b Notes
• If you connect your camcorder to the TV using more than one type of cable to output images, the order of
priority of the TV input jacks is as follows:
HDMI t component video t S VIDEO t video.
62
Download from Www.Somanuals.com. All Manuals Search And Download.
When connecting to your TV via a VCR
your camcorder to the LINE IN input on the VCR using the A/V connecting cable. Set the
input selector on the VCR to LINE (VIDEO 1, VIDEO 2, etc.).
If your TV/VCR has a 21-pin adaptor (EUROCONNECTOR)
Use a 21-pin adaptor (optional) to view playback pictures.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Menu
Using the menu items
You can change various settings or make
detailed adjustments using the menu items
displayed on the screen.
3
Turn the SEL/PUSH EXEC dial
until the icon of the desired menu
is highlighted, then press the dial
to select the menu.
CAMERA SET (p. 69)
AUDIO SET (p. 76)
DISPLAY SET (p. 79)
IN/OUT REC (p. 83)
TC/UB SET (p. 87)
MEMORY SET (p. 89)
OTHERS (p. 90)
POWER switch
SEL PUSH EXEC
/
MENU
OTHERS
STBY
RETURN
CAMERA PROF.
ASSIGN BTN
CLOCK SET
WORLD TIME
LANGUAGE
QUICK REC
DATE REC
MENU button
SEL/PUSH EXEC dial
[
]
MENU :END
1
2
Set the POWER switch to
CAMERA or VCR.
4
Turn the SEL/PUSH EXEC dial
until the desired menu item is
highlighted, then press the dial to
select the item.
Press the MENU button.
The menu index screen appears.
STBY
STBY
ASSIGN BTN
CLOCK SET
WORLD TIME
LANGUAGE
QUICK REC
DATE REC
BEEP
OFF
REC LAMP[F]
The available menu items vary
depending on the position of the power
switch of your camcorder. Unavailable
items will be grayed out.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
5
6
Turn the SEL/PUSH EXEC dial
until the desired setting is
highlighted or to bring up the
desired setting, then press the
dial to confirm the setting.
STBY
00:00:28:10
BEEP
OFF
ON
[
]
MENU :END
Press the MENU button to hide
the menu screen.
To return to the previous screen, select
[
RETURN].
65
Download from Www.Somanuals.com. All Manuals Search And Download.
.
Available menu items (z) vary depending on the POWER switch
position.
Menu items
Position of POWER switch:
CAMERA
VCR
(CAMERA SET) menu (p. 69)
HYPER GAIN
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
–
AE SHIFT
FLCKR REDUCE
BACK LIGHT
SPOTLIGHT
STEADYSHOT
FOCUS MACRO
HANDLE ZOOM
D.EXTENDER
FADER
SMTH SLW REC
INTERVAL REC
DV FRAME REC
SHOT TRANSITION
COLOR BAR
(AUDIO SET) menu (p. 76)
DV AU.MODE
z
z
z
–
–
–
DV AUDIO MIX
–
z
z
–
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Position of POWER switch:
CAMERA
VCR
(DISPLAY SET) menu (p. 79)
HISTOGRAM
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
z
–
–
–
–
CAM DATA DSP
AU.LVL DISP
LCD BRIGHT
–
–
–
–
–
–
–
z
z
z
z
z
z
z
z
z
VF POWERMODE
(IN/OUT REC) menu (p. 83)
VCR HDV/DV
DV PROGRE.
DV REC MODE
z
–
–
z
–
z
z
z
z
z
z
z
–
z
–
z
z
–
EXT REC CTRL
(TC/UB SET) menu (p. 87)
z
z
z
z
z
z
z
z
z
z
z
z
z
–
z
z
Continued ,
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu items (Continued)
Position of POWER switch:
CAMERA
VCR
(MEMORY SET) menu (p. 89)
–
z
z
z
z
z
z
FORMAT
z
z
z
z
–
REC FOLDER
PB FOLDER
(OTHERS) (p. 90)
CAMERA PROF.
LANGUAGE
z
z
z
z
z
–
z
z
z
z
z
z
z
z
z
z
z
z
z
–
PB ZOOM
QUICK REC
–
z
–
REC LAMP[F]
REC LAMP[R]
REMOTE CTRL
–
z
z
68
Download from Www.Somanuals.com. All Manuals Search And Download.
(CAMERA SET)
menu
Settings to adjust your camcorder to the
LIGHT/STEADYSHOT, etc.)
HYPER GAIN
When you set this function to [ON]
(
), you can increase the gain to its
limit. The default setting is [OFF].
The default settings are marked with B.
The indicators in parentheses appear when
the items are selected.
menu items.
b Notes
• During the hyper gain, you cannot use the
following function.
– [BACK LIGHT]
– [SPOTLIGHT]
• During the hyper gain, the picture quality will
be reduced due to noise.
Press the MENU button t select the
(CAMERA SET) with the SEL/PUSH
EXEC dial.
• [HYPER GAIN] is automatically set to [OFF] if
you turn the power off and back on.
GAIN SETUP
z Tips
You can set gain values for H, M and L
positions of the GAIN switch. The default
settings of [H], [M] and [L] are 18dB, 9dB
and 0dB, respectively.
• You are recommended to use this function with
manual focus.
AGC LIMIT
1 Select [H], [M] or [L] with the SEL/
PUSH EXEC dial.
You can select the upper limit for the Auto
Gain Control (AGC) from [OFF] (21dB, the
default setting), [18dB], [15dB], [12dB],
[9dB], [6dB], [3dB] and [0dB].
2 Set the gain value with the SEL/PUSH
EXEC dial, and press the dial.
You can select the value between -6dB
and 21dB by 3dB. The larger the value,
the higher the gain.
b Notes
• If you adjust the gain manually, you cannot
obtain the effect of [AGC LIMIT].
3 Select [OK] with the SEL/PUSH EXEC
dial.
BLK BALANCE
4 Press the MENU button to hide the
menu screen.
SMOOTH GAIN
WB PRESET
You can set the transition speed at which
the gain setting shifts from one value to
another, set for the gain switch positions,
when you switch the gain switch from a
position to another. You can select the
transition speed from [FAST], [MIDDLE]
and [SLOW] or set to [OFF]. The default
setting is [OFF].
You can use the preset white balance. For
WB OUTDR LVL
You can set an offset value to adjust the
outdoor white balance when you set [WB
PRESET] to [OUTDOOR]. You can select
the offset value from [-7] (bluish) - [0]
(normal) - [+7] (reddish). The default
setting is [0] .
Continued ,
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the MENU button t select the
(CAMERA SET) with the SEL/PUSH EXEC dial.
WB TEMP SET
AE SHIFT
You can set the color temperature between
2300K and 15000K in 100K steps when
you set [WB PRESET] to [MANU WB
TEMP].
You can set an offset value to adjust the
automatic exposure adjustment value
between [-7] (dark) and [+7] (bright) with
the SEL/PUSH EXEC dial. The default
setting is [0] .
and selected value
appears on the screen when you change the
value from the default setting.
ATW SENS
You can set the auto white balance
operation under a reddish light source such
as an incandescent lamp or candle, or under
a blueish light source such as in outdoor
shade.
b Notes
• This function is not effective while you adjust
the iris, shutter speed and gain all manually.
• This function is not effective when [HYPER
GAIN] is set to [ON].
BINTELLIGENT
Automatically adjusts the white balance so
that scenes look natural for the light
source.
AE WINDOW
You can select a photometric area in which
the automatic exposure adjustment function
detects changes in the brightness of the
subject to automatically adjust the
exposure. This function is not effective
during the manual exposure adjustment.
HIGH
Automatically adjusts the white balance
while reducing redness or blueness.
MIDDLE
LOW
Automatically adjusts the white balance
while increasing redness or blueness.
b Notes
• This is only effective when white balance is
adjusted automatically.
• [ATW SENS] is not effective under a clear sky
or the sun.
STANDARD
TYPE 1
TYPE 3
SMOOTH WB
You can set the transition speed at which
the color temperature values shifts from one
value to another, set for the white balance
memory switch positions, when you switch
the white balance memory switch from a
position to another. You can select the
transition speed from [FAST], [MIDDLE]
and [SLOW] or set to [OFF]. The default
setting is [OFF].
TYPE 2
TYPE 4
TYPE 5
z
Tips
• The photometric area stays the same even when
you change the aspect ratio.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Example: TYPE 4
16:9
[HDV1080i]: [HDV PROGRE.] t [REC
TYPE] t [SCAN TYPE]
[DV]: [DV PROGRE.] t [SCAN TYPE]
4:3
SCAN TYPE
Frequency range
50
25
50.00 Hz to 200.0 Hz
25.00 Hz to 200.0 Hz
FLCKR REDUCE
photometric area
BON
Reduces flickering. Flickering of the
screen under a light source such as
fluorescent lamps will be reduced.
AE RESPONSE
You can select the speed at which the
automatic exposure adjustment function
follows changes in the brightness of the
subject. You can select the speed from
[FAST], [MIDDLE] and [SLOW]. The
default setting is [FAST].
OFF
Not reduce flickering. Select this when you
do not want to reduce flickering.
b Notes
• Flickering may not be reduced for certain light
sources.
AT IRIS LMT
.
You can select the highest iris value for the
automatic adjustment from [F11], [F9.6],
[F8], [F6.8], [F5.6], [F4.8] and [F4]. The
default setting is [F11].
CNTRST ENHCR
When you set this function to [ON], your
camcorder detects high contrast images,
such as backlit scenes, and automatically
improves the unexposed images. The
default setting is [OFF].
b Notes
• This function is not effective during the manual
iris adjustment.
b Notes
• When you set [BACK LIGHT] to [ON],
[CNTRST ENHCR] is temporarily disabled.
ECS FREQ.
You can set the shutter speed so that
horizontal strips do not appear on a monitor
screen, which is likely to occur when you
record a monitor screen. Change the setting
with the SEL/PUSH EXEC dial, then press
the dial to confirm the setting. The default
setting is [50.00Hz].
BACK LIGHT
When you set this function to [ON] (.),
you can correct backlighting. The default
setting is [OFF].
b Notes
You must set the shutter speed to the ECS
• The back light function is canceled when you
set [SPOTLIGHT] to [ON].
(
You can set the shutter speed in the
following frequency ranges depending on
the setting of [SCAN TYPE]. How to select
[SCAN TYPE] depends on the setting of
SPOTLIGHT
When you set this function to [ON] ( ),
you can prevent overexposure of light
[REC FORMAT] of
menu.
(IN/OUT REC)
Continued ,
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the MENU button t select the
(CAMERA SET) with the SEL/PUSH EXEC dial.
during recording of a subject under strong
light, such as a stage. For example, you can
prevent people's faces from over-
FOCUS MACRO
When you set this function to [ON], you
can focus on a subject within 80 cm (about
2 5/8 feet). The default setting is [ON].
When you set this function to [OFF] (
you can set fine focus on a subject further
than 80 cm regardless of the zoom position
although you will lose focus on a subject
within 80 cm.
highlighting. The default setting is [OFF].
b Notes
),
• The spotlight function is canceled when you set
[BACK LIGHT] to [ON].
• You cannot use the spotlight function if at least
two of iris, gain, and shutter speed are adjusted
manually.
b Notes
STEADYSHOT
• This function is effective only when the focus
x ON/OFF
When you select [ON], you can reduce
camera shakes. Select [OFF] ( ) when
you use a tripod (optional) to make images
look natural. The default setting is [ON].
HANDLE ZOOM
You can select the zoom speed for the FIX
position of the handle zoom switch from [1]
(slow) through [8] (fast). The default setting
is [3].
x TYPE
You can select a type of camera-shake
reduction for different recording situations.
D.EXTENDER
HARD
Reduces camera shakes at a high level.
This setting is not suitable for panorama
tilt recordings.
When you set this function to [ON] (
the displayed image becomes 1.5 times
),
larger. The image quality decreases because
the image is digitally processed. This
function helps you to focus on far-away
subjects such as a wild bird away at a
distance. The default setting is [OFF].
BSTANDARD
Reduces camera shakes at a standard level.
SOFT
Reduces camera shakes at a low level.
Slight unsteadiness remains in movies,
which make the movies look as they are.
b Notes
• This function is automatically set to [OFF]
when you turn the power off and back on.
AF ASSIST
FADER
When you set this function to [ON], you
can temporarily focus manually using the
focus ring during the auto focus adjustment.
The default setting is [OFF].
You can add visual effects to transition
between scenes.
1 Select [WHITE FADER] or [BLACK
FADER] during standby to fade in with the
selected effect or recording to fade out with
the selected effect.
b Notes
• This function is effective only when the focus
2 Press the REC START/STOP button.
The fader indicator stops flashing and
disappears when the fading is complete.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
To cancel before starting the operation,
select [OFF] in step 1.
The setting will be cleared every time you
press the REC START/STOP button.
[START TRIGGR]*
[END TRIGGER]
STBY
REC
Fading out
Fading in
WHITE FADER
* The default setting is [START TRIGGR].
BLACK FADER
3 Start recording.
Select [EXECUTE], then press the REC
START/STOP button on the [SMTH SLW
REC] screen.
A slow-motion movie about 4 times longer
than your [REC TIME] setting is recorded.
Recording ends when [Recording···]
disappears from the screen.
b Notes
• This function is automatically set to [OFF]
when you turn the power off and back on.
SMTH SLW REC
To cancel [SMTH SLW REC], press the
MENU button.
Fast moving subjects and actions, which
cannot be captured under the general
recording conditions, can be recorded in
smooth moving slow-motion.
This is useful for recording fast actions
such as a golf or tennis swing.
b Notes
• Sounds cannot be recorded.
• The settings are automatically cleared when you
turn the power off and back on.
• The shutter speed is automatically set to 1/215
second when you start [SMTH SLW REC].
• The recording time may be shorter than the set
time, depending on recording conditions.
• The image quality is lower than with the regular
recording.
1 Set [REC TIME].
Select the recording time from [3sec] (the
default setting), [6sec] and [12sec].
The picture quality deteriorates as the
recording time increases.
2 Set [REC TIMING].
INTERVAL REC
Select the recording timing from [START
TRIGGR] and [END TRIGGER] to record
the action after or before the REC START/
STOP button is pressed.
You can record a series of movies on a tape
at regular intervals. This function is useful
to observe things like cloud movements or
daylight changes. The scenes run smoothly
into each other when you play back the
tape. Use the AC Adapter/Charger to obtain
AC power for long recording.
Recording
Recording
Recording
interval
interval
Continued ,
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the MENU button t select the
(CAMERA SET) with the SEL/PUSH EXEC dial.
1 Select [ON/OFF] t [ON] with the SEL/
PUSH EXEC dial.
DV FRAME REC
2 Perform the following step if you are
changing the recording time from the
default setting of [0.5sec]. If you are
keeping the default recording time, go
straight to step 3.
You can record stop motion (or frame-by-
frame) animation movies. That type of
animation uses a technique of changing the
subject, such as a doll or a toy's positions
and recording it at each different position
while your camcorder sits still. Use the
Remote Commander to reduce camera
shakes.
Select [REC TIME] t [0.5sec], [1sec],
[1.5sec] or [2sec] with the SEL/PUSH
EXEC dial.
3 Perform the following step if you are
changing the interval time from the default
setting of [30sec]. If you are keeping the
default interval time, go straight to step 4.
Select [INTERVAL] t [30sec], [1min],
[5min] or [10min].
4 Select [OK] with the SEL/PUSH EXEC
BOFF
Not use this function.
ON (
)
Records a movie by stop motion (or frame-
by-frame) technique.
dial.
1 Select [ON] with the SEL/PUSH
EXEC dial.
2 Press the MENU button to hide the
menu screen.
5 Press the MENU button to hide the menu
screen.
6 Press the REC START/STOP button.
The [INTERVAL REC] recording starts.
3 Press the REC START/STOP button.
Your camcorder records a movie for
about 5 frames and returns to standby.
To cancel [INTERVAL REC], press the
REC START/STOP button.
The operation of your camcorder differs
depending on when you press the REC
START/STOP button.
If you press the button during [INTERVAL
REC] recording, the recording temporarily
stops. If you press it again, the
[INTERVAL REC] recording restarts.
If you press the button during [INTERVAL
REC] interval, the [INTERVAL REC]
recording stops and regular recording starts.
If you press it again, regular recording
stops. If you press the button once again,
the [INTERVAL REC] recording restarts.
To cancel the [INTERVAL REC]
4 Move the subject and repeat step 3.
b Notes
• When you use frame recording continuously,
the remaining tape time will not be indicated
correctly.
• The last scene will be longer than other scenes.
• You cannot record index signals during frame
recording.
• This function is automatically set to [OFF]
when you turn the power off and back on.
SHOT TRANSITION
recording, select [ON/OFF] t [OFF] with
the SEL/PUSH EXEC dial.
b Notes
• The recording time and interval time may differ
slightly from the settings.
• If you focus manually, you can get sharp images
even if the lighting changes.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
x TYPE
Selects a type of the color bars.
S.TRANS/F.MARK
You can select a function to be assigned to
the SHOT TRANSITION/FOCUS
MARKING button.
B SHOT TRANSITION
Select to assign the shot transition function
to the button.
TYPE 1
FOCUS MARKING
Select to assign the focus marking function
to the button.
x.v.Color
When you set this function to [ON], you
can record with the wider color range. Your
camcorder can reproduce brilliant and vivid
colors for flowers and the beautiful blue-
green of tropical oceans that cannot be
matched by conventional technologies.
TYPE 2
b Notes
• The colors may not be well reproduced when
you play back a movie recorded with this
function set to [ON] on a TV that does not
support x.v.Color.
TYPE 3
• You cannot set [x.v.Color] in the following
cases:
– When recording in SD (standard) format
– When recording movies
• When you set [x.v.Color] to [ON], the picture
profile will be disabled.
TYPE 4 (75% brightness of TYPE 3)
COLOR BAR
x TONE
x ON/OFF
Outputs audio tone signals (1 kHz: full bit
-20 dB) when you set [TONE] to [ON]. The
default setting is [OFF].
When you select [ON], you can display
color bars on the screen or record them on a
tape. This function helps you to adjust
colors when you view movies recorded
with your camcorder on a TV or a monitor.
The default setting is [OFF].
b Notes
• This function is automatically set to [OFF]
when you turn the power off and back on.
Continued ,
75
Download from Www.Somanuals.com. All Manuals Search And Download.
(AUDIO SET) menu
Press the MENU button t select the
(CAMERA SET) with the SEL/PUSH
EXEC dial.
Settings for the audio recording (DV
AU.MODE/XLR SET, etc.)
The default settings are marked with B.
The indicators in parentheses appear when
the items are selected.
See page 64 for details on selecting
menu items.
Press the MENU buttont select the
(AUDIO SET) with the SEL/PUSH
EXEC dial.
FLANGE BACK
You can select a mode for the flange focal
length adjustment. The flange focal length
is a distance from the lens flange to the
plane of the image along the optical axis.
BAUTO ADJUST
Automatically adjusts the flange focal
length.
DV AU.MODE
(DV Audio mode)
MANU ADJUST
Manually adjusts the flange focal length.
FS32K (
)
Records in the 12-bit mode (2 stereo
sounds). Select this setting for the
DVCAM/DV SP recording.
BFS48K (
)
Records in the 16-bit mode (1 stereo sound
with high quality). Select this setting for
the DVCAM/DV SP recording.
b Notes
• When recording in the HDV format, sound is
automatically recorded in the [FS48K] mode.
AUDIO LIMIT
You can set the clipping-noise reduction
function for CH1/CH2.
BOFF
Disables the function.
ON
Enables the function.
b Notes
• This function is available only when you set the
AUTO/MAN switch to MAN.
XLR SET
x XLR AGC LINK
You can select either linked or separate
AGC (Auto Gain Control) of CH1 and CH2
when using an external microphone.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
BSEPARATE
OFF
Separately applies the AGC for CH1/CH2.
Sound inputs from CH1/CH2 will be
recorded as separate sound.
Does not reduce noise from the
microphone.
b Notes
• The setting is not effective when you set the
INPUT1 switch to LINE.
LINKED
Applies the AGC of CH1 linked with that
of CH2. Sound inputs from CH1/CH2 will
be recorded as a set of sound such as stereo
x INPUT1 TRIM
Adjusts the input signal level from
INPUT1.
sound.
screen.
A
appears on the status check
You can select from [-18dB], [-12dB],
[-6dB], [0dB], [6dB] and [12dB]. The
default setting is [0dB].
b Notes
• This function is available when the CH1 and
CH2 switches are set to AUTO and the INPUT1
and INPUT2 switches are both set to MIC or
b Notes
• The setting is not effective when you set the
INPUT1 switch to LINE.
x AU.MAN GAIN
You can select either linked or separate
audio level control of CH1 and CH2 when
using an external microphone.
x INPUT1 WIND
BOFF
Disables wind noise reduction.
BSEPARATE
ON
Separately controls the audio levels of
CH1 and CH2. Sound inputs from CH1
and CH2 will be recorded as separate
sound.
Enables wind noise reduction.
appears on the status check screen.
b Notes
• The setting is not effective when you set the
INPUT1 switch to LINE.
LINKED
Controls the audio level of CH1 linked
with that of CH2. Sound inputs from CH1
and CH2 will be recorded as a set of sound
such as stereo sound.
status check screen.
x INPUT2 MIC NR
M
appears on the
x INPUT2 TRIM
x INPUT2 WIND
b Notes
You can set INPUT2 in the same way as
INPUT1.
• This function is available when the CH1 and
CH2 switches are set to MAN and the INPUT1
and INPUT2 switches are both set to MIC or
z Tips
• 48 dBu is set as 0dB in your camcorder.
• Set [INPUT TRIM] to [0dB] for the supplied
microphone (ECM-XM1).
• When you select [LINKED], you can adjust the
volume with the AUDIO LEVEL dial of CH1
• Set [INPUT TRIM] to [12dB] for the optional
microphone (Sony ECM-NV1).
x INPUT1 MIC NR
Reduces noise from the microphone.
• The INPUT TRIM function adjusts the input
level from an external microphone. When using
a highly sensitive microphone or recording loud
sound, set this to the minus side. When using a
less sensitive microphone or recording quiet
sound, set it to the plus side.
BON
Reduces noise from the microphone.
appears on the status check screen.
Continued ,
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the MENU button t select the
(AUDIO SET) with the SEL/PUSH EXEC dial.
• When recording loud sound, the sound may be
distorted at either the input point or the
recording point. If it is distorted at the input
point, adjust the sound using the INPUT TRIM
function. If it is distorted at the recording point,
lower the total volume level manually.
CH3,CH4
Outputs only the sound dubbed in CH3 and
CH4.
• If you set INPUT TRIM too far to the minus
side, the microphone volume becomes too low,
resulting in a poor signal to noise ratio.
• Test the effect of the INPUT TRIM function
according to the microphone used or the sound
field of the recording site before actual
recording.
AUDIO CH SEL
BCH1,CH2
Reproduces sound of CH1 and CH2 in
respective channels.
CH1
Reproduces sound of CH1 in channels 1
and 2.
CH2
Reproduces sound of CH2 in channels 1
and 2.
z Tips
• When you select [CH1,CH2] and play back a
tape on your camcorder, sound of CH1 + CH2
comes out of the speakers.
DV AUDIO MIX
You can monitor the sound dubbed from
another device or recorded through 4-
channel microphone during playback. You
can set how to output the sound.
BCH1,CH2
Outputs only the sound recorded in CH1
and CH2 during recording.
MIX
Outputs mixed sound of the sound
recorded in CH1 and CH2 during
recording and the sound dubbed in CH3
and CH4.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
(DISPLAY SET)
menu
Display settings of the display and the
viewfinder (MARKER/VF B.LIGHT/DISP
OUTPUT, etc.)
BOFF
Does not display a histogram.
NORMAL
Displays a histogram.
The default settings are marked with B.
The indicators in parentheses appear when
the items are selected.
menu items.
ADVANCE
Displays a histogram, and a bar that
indicates an average of the brightness
levels around the center of an image
(within the marker) on the histogram.
Press the MENU button t select the
(DISPLAY SET) with the SEL/PUSH
EXEC dial.
Average
ZEBRA
You can display a zebra pattern as a guide
for adjusting brightness.
Darker
Brightness
Brighter
x ON/OFF
When you select [ON],
and the
brightness level appear on the screen. The
zebra pattern will not be recorded on a tape
or a “Memory Stick Duo.”
z Tips
• The left area on the graph shows the darker
areas of the image while the right area shows the
brighter areas.
• A vertical line that indicates the brightness level
of [ZEBRA] will be displayed on the histogram
when you set [ZEBRA] to [ON].
x LEVEL
You can select the brightness level
between 70 and 100 or 100+.
z Tips
PEAKING
• The zebra pattern is a strip pattern displayed
over a part of an image on the screen when the
part is higher than a preset brightness level.
x ON/OFF
When you select [ON], you can display an
image on the screen with its details
enhanced. This function helps you to adjust
the focus. The default setting is [OFF].
HISTOGRAM
You can adjust the iris while referring to a
histogram. A histogram is a graph that
shows the distribution of the image
brightness. You can use the histogram as a
guide for adjusting the iris. The histogram
will not be recorded on a tape or a
“Memory Stick Duo.”
x LEVEL
You can select a peaking sensitivity from
[HIGH], [MIDDLE] and [LOW]. The
default setting is [MIDDLE].
b Notes
• You cannot record an image with
enhanced details on a tape or a “Memory
Stick Duo.”
Continued ,
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the MENU button t select the
(DISPLAY SET) with the SEL/PUSH EXEC dial.
z Tips
b Notes
• You cannot display markers on an external
device connected to your camcorder via an
analog jack.
• You cannot display markers when you set
[DATE REC] to [ON].
• You can focus more easily using this
function in combination with the
expanded focus function (p. 29).
MARKER
z Tips
x ON/OFF
• You can display all types of markers at the same
time.
• You can obtain a balanced composition by
positioning the subject at the cross points of the
guideframe marker.
When you select [ON], you can display
markers. The default setting is [OFF].
Markers will not be recorded on a tape or
“Memory Stick Duo.”
• You can display markers only on the LCD panel
and viewfinder. You cannot display them on an
external device.
x CENTER
When you select [ON], you can display a
marker at the center of the screen. The
default setting is [ON].
CAM LEVELING
When you set this function to [ON], you
can display a level meter to check the level
of your camcorder. The default setting is
[OFF].
x ASPECT
When you select [ON], you can display
markers at boundaries of display area
defined by the aspect ratio, which you can
select from [4:3], [13:9] and [14:9]. The
default setting is [OFF].
EXP.FOCUS TYPE
You can set a type of the expanded focus
display.
BTYPE 1
Simply enlarges images.
x SAFETY ZONE
When you select [ON], then [80%] or
[90%], you can display markers at
boundaries of display area that regular
home TVs can display. The default setting
is [OFF].
TYPE 2
Enlarges and shows images in white and
black.
x GUIDEFRAME
When you select [ON], you can display
frame markers that help you to check
horizontal and vertical positions of a
subject. The default setting is [OFF].
80
Download from Www.Somanuals.com. All Manuals Search And Download.
CAM DATA DSP (Camera data
display)
ZOOM DISPLAY
BBAR
When you set this function to [ON], you
can constantly display the iris, shutter speed
and gain settings on the screen. The default
setting is [OFF].
Displays a bar that indicates the zoom
position.
NUMBER
Displays a number (0 through 99) that
indicates the zoom position.
60min
00:04:50:04
FOCUS DISP
You can select how to display the focal
distance during manual focus.
BMETER
Iris value
Shutter speed
Displays the focal distance in meters.
Gain value
FEET
z Tips
Displays the focal distance in feet.
• The settings appear on the screen during
the manual adjustment regardless of the
settings of this function.
SHUTTER DISP
•
indicates that the settings are
automatically adjusted values.
You can select how to display the shutter
speed.
• The displayed settings are different from
the settings that will be displayed when
you press the DATA CODE button
BSECOND
Displays the shutter speed in seconds.
DEGREE
Displays the shutter speed in degrees.
AU.LVL DISP (Audio level display)
The shutter speed equal to the period that
your camcorder reads image data from the
image sensor is defined as 360 degrees.
The degree is calculated based on this
definition and displayed.
When you set this function to [ON], you
can display the audio level meter on the
screen. The default setting is [ON].
– When [SCAN TYPE] is set to [50], 1/50
second is defined as 360 degrees.
– When [SCAN TYPE] is set to [25], 1/25
second is defined as 360 degrees.
For details on [SCAN TYPE], see [HDV
(p. 84).
b Notes
Audio level meter
• When you press the DATA CODE button, the
shutter speed will be displayed in seconds
regardless of the setting of this function.
Continued ,
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the MENU button t select the
(DISPLAY SET) with the SEL/PUSH EXEC dial.
z Tips
b Notes
• Shutter speed slower than 360° are displayed in
multiples of 360°, such as 360° × 2.
• When you connect your camcorder to outside
power sources, [BRIGHT] is automatically
selected for the setting.
• When you select [BRIGHT], the recordable
time with the battery is slightly reduced.
LCD BRIGHT
You can adjust the brightness of the LCD
screen. Changes in the LCD brightness will
not affect the brightness of recording
images.
VF COLOR
BON
Displays images in the viewfinder in color.
z Tips
OFF
Displays images in the viewfinder in black
and white.
LCD COLOR
VF POWERMODE
You can adjust the color level of the LCD
panel. Changes in the LCD color level will
not affect the color level of recording
images.
BAUTO
Turns on the viewfinder while you close
the LCD panel or record in mirror mode.
ON
LCD BL LEVEL
Always turns on the viewfinder.
You can adjust the backlight level of the
LCD screen.
LETTER SIZE
BNORMAL
Standard brightness.
BNORMAL
Displays the menu in regular letter size.
BRIGHT
Brightens the LCD screen.
2×
Displays the selected menu items in letter
size, the height of which is doubled.
b Notes
• When you connect your camcorder to outside
power sources, [LCD BL LEVEL] is
automatically set to [BRIGHT].
REMAINING
• When you select [BRIGHT], the recordable
time with the battery is slightly reduced.
BAUTO
Displays the remaining time of a tape for
about 8 seconds in the following situation:
VF B.LIGHT
• When you set the POWER switch to VCR
or CAMERA with a cassette inserted.
• When you press N (Play) or the
You can adjust the brightness of the
viewfinder.
DISPLAY/BATT INFO button.
BNORMAL
Standard brightness.
ON
Always displays the remaining time of a
tape. The remaining time is not displayed
when you insert a new tape or a tape that is
BRIGHT
Brightens the viewfinder screen.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
(IN/OUT REC)
menu
Recording settings, input and output
settings (REC FORMAT/HDV PROGRE./
VIDEO OUT/EXT REC CTRL, etc.)
rewound to the beginning. It is displayed
when you start playback or recording.
DISP OUTPUT
The default settings are marked with B.
The indicators in parentheses appear when
the items are selected.
You can select outputs to which display
information, such as time code, is
outputted.
See page 64 for details on selecting
menu items.
BLCD PANEL
Press the MENU buttont select the
(IN/OUT REC) with the SEL/PUSH
EXEC dial.
Outputs the information to the LCD screen
and viewfinder.
V-OUT/PANEL
Outputs the information to the LCD screen
and composite output.
REC FORMAT
ALL OUTPUT
You can select a recording format.
Outputs the information to the LCD
screen, HDMI output, component output
and composite output.
BHDV1080i (
)
Records in the HDV1080i format.
DV (
)
Records in the DVCAM (DV) format.
Set also [DV REC MODE] when you
record in this format.
b Notes
• Set also [i.LINK SET] when you output a movie
to an external device through an i.LINK cable
VCR HDV/DV
You can select a type of output signal to an
external device for playing back a movie on
the device. Select [AUTO] in most cases.
When you connect your camcorder to an
external device with an i.LINK cable, select
a type of input and output signals to and
from the external device via the HDV/DV
jack. You can record or play back a movie
reproduced by the selected type of signals.
BAUTO
Automatically switches between HDV
signals and DV signals during playback.
During the i.LINK connection, recognizes
HDV signals and DVCAM (DV) signals,
and automatically inputs or outputs the
Continued ,
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the MENU button t select the
(IN/OUT REC) with the SEL/PUSH EXEC dial.
signals to or from the external device via
the HDV/DV (i.LINK) jack for
recording or playback.
x SCAN TYPE
You can select a scan type for recording in
HDV format.
HDV (
)
B50
Plays back only HDV format sections of a
tape.
Records by the interlace scan.
25
During the i.LINK connection, inputs or
outputs only HDV signals to or from an
external device via the HDV/DV
(i.LINK) jack for recording or playback.
Select this setting when you connect your
camcorder to your computer.
Records 25 frames per second.
b Notes
• Selectable [SCAN TYPE] settings differ
depending on the setting of [REC TYPE].
– [INTERLACE]: [50], [25]
– [PROGRESSIVE]: [25]
• You can only play back a tape recorded with the
[REC TYPE] set to [PROGRESSIVE] on a
device that supports playback of a tape recoded
by progressive scanning.
DV (
)
Plays back only DVCAM (DV) format
sections of a tape.
During the i.LINK connection, inputs or
outputs only DVCAM (DV) signals to or
from an external device via the HDV/
DV (i.LINK) jack for recording or
DV PROGRE.
playback. Select this setting when you
connect your camcorder to your computer.
x SCAN TYPE
You can select a scan type for recording in
DVCAM/DV format.
b Notes
• Make sure to disconnect the i.LINK cable prior
to changing the setting. Otherwise, a video
device may not recognize video signals.
• When you select [AUTO], images and sounds
may be cut off on switching between HDV
signals and DVCAM (DV) signals.
B50
Records by the interlace scan.
25
Records 25 frames per second.
• When you set [i.LINK SET] t [HDV t DV
CONV] to [ON], the following signals will be
outputted:
– [AUTO]: HDV signals are converted to
DVCAM (DV) signals and outputted.
DVCAM (DV) signals are outputted without
any conversion.
DV REC MODE (DV Recording
mode)
This function is available only when you set
[REC FORMAT] to [DV].
– [HDV]: HDV signals are converted to
DVCAM (DV) signals and outputted.
DVCAM (DV) signals will not be outputted.
BDVCAM (
Records in the DVCAM format.
)
– [DV]: DVCAM (DV) signals are outputted
without any conversion. HDV signals will not
be outputted.
DV SP (
)
Records in the SP (Standard Play) mode of
the DV format to record for a longer time
than in the DVCAM format.
HDV PROGRE.
b Notes
x REC TYPE
• Mosaic-like disturbance or audio interruption
may occur when you play back a movie
recorded in the DV SP mode by another device.
You can select an HDV recording format
from [INTERLACE] and
[PROGRESSIVE].
84
Download from Www.Somanuals.com. All Manuals Search And Download.
• Image may be distorted or time code may not be
properly connected between the scenes recorded
in the DVCAM mode and DV SP mode.
– S Video
– Audio/Video
BSQUEEZE
Outputs a horizontally compressed image
while maintaining its original height.
DV WIDE REC
You can record a movie in an aspect ratio
that matches that of a TV that you want to
connect. Refer also to the instruction
manuals that come with the TV.
LETTER BOX
Outputs an image with black bars added to
the top and bottom of the original image,
while maintaining the original aspect ratio.
BON
EDGE CROP
Outputs the central portion of the original
image by cropping its right and left edges.
Records a movie in an aspect ratio that
matches the full screen of a 16:9 (wide)
TV.
b Notes
OFF (
)
• When you view a movie recorded in the
DVCAM (DV) format with [DV WIDE REC]
set to [ON] on a standard 4:3 TV, images of the
movie may appear vertically compressed. In
such a case, set [DV WIDE CONV] to
Records a movie in an aspect ratio that
matches the full screen of a 4:3 TV.
b Notes
• Set [DV WIDE CONV] correctly to suite a TV
[LETTER BOX] or [EDGE CROP].
x DV WIDE CONV
• The aspect ratio will be fixed to 16:9 and you
cannot set it to 4:3 when you record in HDV
format.
You can select a down convert type when
you down-covert DV widescreen signal to
DV signal.
Use this function for signals outputting
from the following output jacks:
– Component (576i)
VIDEO OUT
x COMPONENT
You can select [576i] or [1080i/576i]
depending on your TV when you connect
your camcorder to a TV via a component
cable.
– S Video
– Audio/Video
BSQUEEZE
Outputs a horizontally compressed image
while maintaining its original height.
576i
Supports connection between your
camcorder and a TV with a component
input jack that supports the 576i format.
LETTER BOX
Outputs an image with black bars added to
the top and bottom of the original image,
while maintaining the original aspect ratio.
B1080i/576i
Supports connection between your
camcorder and a TV with a component
input jack that supports the 1080i format.
EDGE CROP
Outputs the central portion of the original
image by cropping its right and left edges.
x DOWN CONVERT
You can select a down convert type when
you down-covert HDV signal to DV signal.
Use this function for signals outputting
from the following output jacks:
– Component (576i)
Continued ,
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the MENU button t select the
(IN/OUT REC) with the SEL/PUSH EXEC dial.
SYNCHRONOUS (
)
i.LINK SET
Records movies, sound and time code on a
connected device in synchronization with
your camcorder.
x HDV t DV CONV
When you set this function to [ON], you
can convert HDV format signals to DV
format signals and output the DV format
signals to an external device via the
HDV/DV (i.LINK) jack. You can output
DV format signals without any format
conversion. The default setting is [OFF].
RELAY (
)
Records movies, sound and time code on a
connected device when a tape on your
camcorder reaches close to the end during
recording.
EXT ONLY (
)
x DOWN CONVERT
You can operate an external recording
unit* with the REC START/STOP button
of your camcorder.
*HVR-MRC1(supplied) or HVR-DR60
(optional)
You can set a down convert type when you
set [HDV t DV CONV] to [ON] to
convert HDV format signals to DV format
signals.
BSQUEEZE
Outputs a horizontally compressed image
while maintaining its original height.
b Notes
• When this function is set to [EXT ONLY],
does not flash even when there is no tape
inserted.
• You can use the REC START/STOP button of
your camcorder as a recording start/stop button
for the external recording unit when you set this
function to [EXT ONLY]. Use the REC button
recording on a tape or the STOP button to stop
recording.
EDGE CROP
Outputs the central portion of the original
image by cropping its right and left edges.
b Notes
• For i.LINK connection, see [VCR HDV/DV]
(p. 83).
• Disconnect the i.LINK cable before setting
[i.LINK SET]. Otherwise, the connected video
device may not be able to recognize the video
signal from your camcorder.
•
(EXT ONLY) flashes when you
connect an external recording unit that is not
supported by [EXT ONLY].
x STBY COMMAND
EXT REC CTRL
BREC PAUSE
Stops recording operation of a connected
device by putting it in pause when you stop
recording operation of your camcorder.
You can connect your camcorder to an
HDV/DVCAM/DV compatible device
(digital HD video camera recorder, digital
video camera recorder, hard disc recorder,
etc.) with an i.LINK cable, and record
movies on your camcorder and the
connected device simultaneously, or
continue recording from your camcorder to
the connected device.
STOP
Stops recording operation of a connected
device when you stop recording operation
of your camcorder.
Refer also to the instruction manuals
supplied with the connecting devices.
x REC CTL MODE
BOFF
Does not record on a connected device.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
(TC/UB SET) menu
(TC PRESET/UB PRESET/TC LINK, etc.)
2 Select [PRESET] with the SEL/PUSH
EXEC dial.
3 Select the first 2 digits with the SEL/PUSH
EXEC dial.
4 Set other digits by repeating step 3.
5 Select [OK] with the SEL/PUSH EXEC
dial.
The default settings are marked with B.
The indicators in parentheses appear when
the items are selected.
menu items.
Press the MENU button t select the
(TC/UB SET) with the SEL/PUSH EXEC
dial.
x RESET
You can reset the user bit (00 00 00 00).
Select [RESET] in step 1 of the
[PRESET].
TC PRESET
x PRESET
TC RUN
You can preset the time code.
1 Select [TC PRESET] with the SEL/PUSH
EXEC dial.
You can select how the time code advances.
2 Select [PRESET] with the SEL/PUSH
EXEC dial.
3 Select the first 2 digits with the SEL/PUSH
EXEC dial.
You can set the time code between
00:00:00:00 and 23:59:59:24.
BREC RUN
Advances the time code only during
recording.
Select this setting to record the time code
continuous from the last time code of the
previous recording.
4 Set other digits by repeating step 3.
5 Select [OK] with the SEL/PUSH EXEC
FREE RUN
Advances the time code regardless of
operation of your camcorder.
dial.
x RESET
Select this setting to save the actual time in
the time code.
You can reset the time code (00:00:00:00).
Select [RESET] in step 1 of the
[PRESET].
TC MAKE
BREGENERATE
TC COUNTUP
Reads the last time code of the previous
recording from the tape and records the
new time code consecutively from the last
time code during the backspace editing.
You can increment the hour of time code by
1 and reset the minute, second and frame of
time code when you execute this function.
The time code runs in [REC RUN] mode
regardless of the setting of [TC RUN].
b Notes
• This function is available only when you set
[TC MAKE] to [PRESET].
PRESET
Records the newly set time code on the
tape.
UB PRESET
x PRESET
You can preset the user bit.
TC LINK
You can synchronize the time codes of
multiple camcorders.
This function is useful for editing movies
recorded by multiple camcorders.
1 Select [UB PRESET] with the SEL/PUSH
EXEC dial.
Continued ,
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the MENU button t select the
(TC/UB SET) with the SEL/PUSH EXEC dial.
1 Insert a tape to the main camcorder from
which you want to generate the time code.
2 Set the POWER switches of the main and
sub camcorders to CAMERA.
b Notes
• This function is available in the following cases:
– [TC MAKE] : [PRESET]
– [TC RUN] : [FREE RUN]
3 Connect the sub camcorder to the main
camcorder with an i.LINK cable.
4 Set the main and sub camcorder as follows:
– [UB TIME REC] : [OFF]
• The time lag may occur between the set time
code and the actual time as time goes on. Do
[UB-DATE/TC-TIME] again prior to recording.
• The date saved in the user bit will not be
automatically updated even when the actual date
has been changed.
Set the sub camcorders as follows:
5 Select [TC/UB SET] t [TC LINK] with
the SEL/PUSH EXEC dial.
The message [Synchronize TC with
connected device?] appears.
6 Select [YES] to synchronize the time code
of the sub camcorder with that of the main
camcorder. Disconnect the i.LINK cable
from your camcorders when
synchronization is completed. You can
record with the synchronized time codes
using those camcorders.
b Notes
• If you want to execute [TC LINK] for more than
two camcorders, repeat the steps for multiple
sub camcorders with one main camcorder.
• Some frame shifting may occur over time after
time code synchronization.
• Some frame shifting may occur if you turn the
power off and back on. In such a case, set [TC
LINK] again.
UB TIME REC
BOFF
Does not save the actual time in the user
bit code.
ON
Saves the actual time in the user bit code.
UB-DATE/TC-TIME
You can save the date and time set in your
camcorder in the user bit and time code,
respectively, when you do this function.
88
Download from Www.Somanuals.com. All Manuals Search And Download.
(MEMORY SET)
menu
Settings for the “Memory Stick Duo” (ALL
ERASE/FORMAT, etc.)
FORMAT
You do not need to format the “Memory
Stick Duo” since it is already formatted at
the factory. If you want to format the
“Memory Stick Duo,” select
The default settings are marked with B.
The indicators in parentheses appear when
the items are selected.
[YES]t[YES].
menu items.
b Notes
• Do not do any of the following while [
Formatting…] is displayed:
– Operate the POWER switch/buttons.
– Eject the “Memory Stick Duo.”
Press the MENU button t select the
(MEMORY SET) with the SEL/PUSH
EXEC dial.
• Formatting erases everything on the “Memory
Stick Duo” including protected image data and
newly created folders.
ALL ERASE
You can delete all the still images without
image protection on a “Memory Stick Duo”
or in the selected folder.
FILE NO.
BSERIES
1 Select [ALL FILES] or
Assigns file numbers in sequence even if
the “Memory Stick Duo” is replaced with
another one. The file number is reset when
a new folder is created or the recording
folder is replaced with another.
[CURRENT FLDR].
[ALL FILES]: Deletes all the images on
the “Memory Stick Duo.”
[CURRENT FLDR]: Deletes all the
images in the currently selected folder.
2 Select [YES] t [YES] with the SEL/
RESET
PUSH EXEC dial.
Resets the file number to 0001 each time
the “Memory Stick Duo” is changed.
[
Erasing all data...] appears.
[Completed.] appears when all unprotected
images are deleted.
NEW FOLDER
b Notes
When you select [YES], you can create a
new folder (102MSDCF to 999MSDCF) on
a “Memory Stick Duo.” When a folder is
full (a maximum of 9,999 images are
stored), a new folder is automatically
created.
• Release the write protect tab on the “Memory
Stick Duo” beforehand for the “Memory Stick
• The folder will not be deleted even when you
delete all the images in the folder.
• Do not do any of the following while [
Erasing all data...] is displayed:
– Operate the POWER switch/buttons.
– Eject the “Memory Stick Duo.”
b Notes
• You cannot delete the new folder once you have
created it on your camcorder. Format the
“Memory Stick Duo” (p. 89) or delete it on your
computer.
• The number of recordable pictures on a
“Memory Stick Duo” may decrease as the
number of folders increases.
Continued ,
89
Download from Www.Somanuals.com. All Manuals Search And Download.
(OTHERS) menu
Press the MENU button t select the
(MEMORY SET) with the SEL/
PUSH EXEC dial.
Settings while recording on a tape or other
basic settings (QUICK REC/BEEP, etc.)
The default settings are marked with B.
The indicators in parentheses appear when
the items are selected.
See page 64 for details on selecting
menu items.
Press the MENU button t select the
(OTHERS) with the SEL/PUSH EXEC
dial.
REC FOLDER (Recording folder)
You can select a folder in which you want
to store still images.
Select the folder with the SEL/PUSH
EXEC dial.
z Tips
• The still images will be stored in the
101MSDCF folder by default.
• Once you store the still images in the current
folder, the folder is selected as a playback
folder.
CAMERA PROF. (Camera profile)
You can save up to 99 camera setting
profiles on a “Memory Stick Duo” and two
profiles in your camcorder. Using these
saved profiles let you quickly obtain
PB FOLDER (Playback folder)
suitable camera settings later. When using
multiple camcorders of this model, you can
save the setting on a “Memory Stick Duo”
and load them into the other camcorders.
You can select a folder in which still
images you want to view are stored.
Select the folder with the SEL/PUSH
EXEC dial.
z Tips
• You can save menu settings, picture profiles and
button settings as a camera profile.
x To load a camera profile
You can load a camera profile and use it on
your camcorder.
1 Select [LOAD] with SEL/PUSH EXEC
dial.
2 Select the camera profile that you want
to load with the SEL/PUSH EXEC dial.
3 Select [YES] in the check screen.
Your camcorder is restarted and the
selected camera profile becomes
effective.
b Notes
• You cannot load camera profile that has been
saved by a different model of camcorder or
edited on a computer.
x To save a camera profile
1 Select [SAVE] with the SEL/PUSH
EXEC dial.
2 Select [MEMORY STICK] with the
SEL/PUSH EXEC dial to save the
camera profile on the “Memory Stick
90
Download from Www.Somanuals.com. All Manuals Search And Download.
Duo” or [CAMERA] to save it in your
camcorder.
1 Select [COPY] with the SEL/PUSH
EXEC dial.
3 Select [NEW FILE] or an existing
profile name with the SEL/PUSH
EXEC dial.
4 Select [YES] in the check screen with
the SEL/PUSH EXEC dial.
2 Select the camera profile that you want
to copy with the SEL/PUSH EXEC dial.
3 Select [MEMORY STICK] or
[CAMERA] for a “Memory Stick Duo”
or your camcorder as a copy destination
of the camera profile.
The camera profile is saved.
z Tips
4 Select [NEW FILE] or an existing
profile name with the SEL/PUSH
EXEC dial.
• When you select [NEW FILE] in [MEMORY
STICK], a camera profile is saved as [MS01]
the fist time you save a camera profile.
5 Select [YES] on the check screen.
• When you select [NEW FILE] in [CAMERA], a
camera profile is saved as [CAM1] or [CAM2].
• When you select an existing camera profile, the
new camera profile is overwritten.
• You cannot view nor edit a camera profile saved
on a “Memory Stick Duo” on your computer.
z Tips
• You can copy a camera profile saved on a
“Memory Stick Duo” to your camcorder.
• You can save a camera profile on a “Memory
Stick Duo” that has still image data.
ASSIGN BTN
x To change the camera profile name
You can change the camera profile name.
CLOCK SET
1 Select [PROFILE NAME] with the
SEL/PUSH EXEC dial.
2 Select the camera profile of which you
want to change the name with the SEL/
PUSH EXEC dial.
WORLD TIME
[PROFILE NAME] screen appears.
When you use your camcorder abroad, you
can adjust the clock to the local time by
setting the time difference with the SEL/
PUSH EXEC dial.
3 Change the profile name with the SEL/
PUSH EXEC dial.
z Tips
When you set the time difference to 0, the
clock returns to the original setting.
• You can enter the name in the same way
4 Select [OK] with the SEL/PUSH
EXEC dial.
Profile name is changed.
LANGUAGE
You can select the language to be used on
the LCD screen.
x To delete camera profile settings
1 Select [DELETE] with the SEL/PUSH
EXEC dial.
z Tips
• Your camcorder offers [ENG[SIMP]]
(simplified English) in case that you cannot find
your native tongue among the options.
2 Select the camera profile you want to
delete with the SEL/PUSH EXEC dial.
3 Select [YES] on the check screen.
x To copy a camera profile
You can copy camera profile saved on your
camcorder to a “Memory Stick Duo.”
Continued ,
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Press the MENU button t select the
(OTHERS) with the SEL/PUSH EXEC dial.
PB ZOOM (Playback zoom)
DATE REC
When you set this function to [ON], you
can enlarge movie images about 1.1 to 5
times (still images about 1.5 to 5 times)
with the handle zoom lever. The default
setting is [OFF]. To end the zoom, press
and hold the W side of the handle zoom
lever until it stops.
BOFF
Does not superimpose the date and time on
images.
ON
Superimposes the date and time on images.
z Tips
• When {DV WIDE REC] is set to [OFF], the
date and time are displayed outside the 4:3 area
but properly recorded on images.
• When you record in the HDV format, the date
and time are displayed at different positions
during recording and playback.
z Tips
• To move the zoom horizontally, press the SEL/
PUSH EXEC dial, then turn the dial. To move
the zoom vertically, press the SEL/PUSH EXEC
dial one more time, then turn the dial.
QUICK REC
BEEP
You can slightly reduce the recording start
point time when resuming recording by
changing the POWER switch from OFF to
CAMERA.
BOFF
Cancels the melody.
ON
Activates a melody when you start/stop
recording.
BOFF
It takes some time to restart recording from
the state that the drum has stopped
rotating, but the transition from the last
recorded scene is smooth.
REC LAMP[F] (Recording lamp
[front])
ON (
)
When you set this function to [OFF], you
can turns off the front camera recording
lamp during recording. The default setting
is [ON].
The time shortens slightly until recording
restarts from the state that the drum has
stopped rotating, but the transition from
the last recorded scene may not be smooth.
Select this when you do not want to miss a
recording chance.
REC LAMP[R] (Recording lamp
[rear])
z Tips
When you set this function to [OFF], you
can turns off the rear camera recording
lamp during recording. The default setting
is [ON].
• When this function is set to [ON], the interval
between scenes freezes for a moment (editing on
your computer is recommended).
• When the camcorder is left in standby for more
than about 3 minutes, your camcorder exits from
standby (the drum stops rotating) to prevent tape
wear and battery loss. Since the power does not
turn off, you can restart recording by pressing
the REC START/STOP button again.
92
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CTRL (Remote control)
When you set this function to [ON], you
can use the supplied Remote Commander
(p. 136). The default setting is [ON].
z Tips
• Set to [OFF] to prevent your camcorder from
responding to a command sent by another VCR
remote control unit.
HOURS METER
You can display the cumulative operation
time of your camcorder with the total hours
of operation, drum rotation, tape running, or
the total number of tape unthreading
operations.
OPERATION
Displays the total hours of operation in 10-
hour increments.
DRUM RUN
Displays the total hours of drum rotation in
10-hour increments.
TAPE RUN
Displays the total hours of tape running in
10-hour increments.
THREADING
Displays the total number of tape
unthreading operation in 10-operation
increments.
93
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing/Editing
Dubbing to VCR, DVD/HDD device, etc.
Connect your camcorder to the wall socket using the supplied AC Adaptor for this operation
(p. 14). Refer also to the instruction manuals supplied with the devices to be connected.
Connecting to external devices
The connection method and the image quality will differ depending on the VCR, DVD/HDD
device and the connectors used.
Jacks on your camcorder
Open the jack cover and connect the cable.
1
2
: Signal flow
Camcorder
Cable
External device
HDV1080i compatible device
1
t HD quality*
i.LINK cable (optional)
1
• i.LINK jack which is compatible with HDV1080i specification is required on the external device.
AV device with i.LINK jack
1
t SD quality*
1
2
i.LINK cable (optional)
AV device with S VIDEO jack
t SD quality*
A/V connecting cable with
S VIDEO (optional)
1
(White)
(Red)
(Yellow)
94
Download from Www.Somanuals.com. All Manuals Search And Download.
: Signal flow
External device
Camcorder
Cable
AV device with audio/video
A/V connecting cable
(supplied)
2
jacks*
2
(Yellow)
(White)
(Red)
1
t SD quality*
*1 Pictures recorded in the DVCAM (DV) format are dubbed in the SD (standard definition) quality,
regardless of the connection.
*2 When connecting your camcorder to a monaural device, connect the yellow plug of the A/V connecting
cable to the video jack on the device, and connect the white (left channel) or red (right channel) plug to
the audio jack on the device.
b Notes
• You cannot dub pictures using the HDMI cable.
Using an i.LINK cable (optional)
The dubbed format (HDV/DV) differs depending on the recording format or the format
supported by the VCR/DVD device. See the table below for selecting the appropriate settings,
and perform necessary menu setting.
b Notes
• Disconnect the i.LINK cable before changing these menu settings, otherwise the VCR/DVD device may
not correctly identify the video signal.
z Tips
• This camcorder has a 6-pin i.LINK terminal. Select a cable that fits the terminal on the device to be
connected.
Continued ,
95
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing to VCR, DVD/HDD device, etc. (Continued)
Format supported by the
VCR/DVD device
Menu setting
Camcorder
recording
format
Copy format
DVCAM
(DV)
format
HDV
format*
[VCR HDV/DV] [i.LINK SET]
1
Copy HDV recording as
HDV
3
HDV
HDV
HDV
–*
[OFF]
Convert HDV recording to
DVCAM (DV)
DVCAM
(DV)
DVCAM
(DV)
[ON]
[AUTO]
Copy DVCAM (DV)
recording as DVCAM
(DV)
DVCAM DVCAM
(DV) (DV)
DVCAM
(DV)
[OFF]
When tape is recorded in both HDV and DVCAM (DV) format
Convert both HDV and
DVCAM (DV) format to
DVCAM (DV)
HDV/
DVCAM
(DV)
DVCAM
(DV)
DVCAM
(DV)
[AUTO]
[HDV]
[ON]
3
Copy only portions
recorded in HDV format
HDV
HDV
–*
[OFF]
DVCAM
(DV)
2
3
–*
–*
2
2
Copy only portions
recorded in DVCAM (DV)
format
HDV
–*
–*
[DV]
[OFF]
DVCAM DVCAM
(DV) (DV)
DVCAM
(DV)
*1 Recording device compliant with the HDV1080i specification.
*2 The tape advances, but no video or sound is recorded (blank).
*3 Picture is not recognized (no recording is made).
b Notes
• When [VCR HDV/DV] is set to [AUTO], and the signal switches between HDV and DVCAM (DV)
formats, the picture and sound are interrupted temporarily.
• When the player and the recorder are both HDV1080i compatible devices such as HVR-Z7E/Z7P and
connected with the i.LINK cable, after pausing or stopping and then resuming the recording, the images
will be a bit choppy or rough at that point.
• Set [DISP OUTPUT] to [LCD PANEL] (the default setting) when connecting with an A/V connecting
When connecting with the A/V connecting cable with S VIDEO (optional)
Connect with S VIDEO jack instead of the video plug (yellow). This connection produces
pictures more faithfully. This connection produces higher quality DVCAM (DV) format
pictures. The audio will not be output when you connect with the S VIDEO cable alone.
96
Download from Www.Somanuals.com. All Manuals Search And Download.
b Notes
Dubbing to another device
• The following cannot be output via the HDV/
DV interface (i.LINK):
– Indicators
– Titles that are recorded on other camcorders
• Pictures recorded in the HDV format are not
output from the HDV/DV interface (i.LINK)
jack during playback pause or in any playback
mode other than normal playback.
1
Prepare your camcorder for
playback.
Insert the recorded cassette.
Slide the POWER switch to VCR.
• Note the following when connecting with an
i.LINK cable:
– The recorded picture becomes rough when a
picture is paused on your camcorder while
recording to a VCR/DVD device.
– Data codes (date/time/camera settings data)
may not be displayed or recorded depending
on the device or application.
– You cannot record the picture and sound
separately.
• When dubbing to a DVD recorder from your
camcorder through an i.LINK cable, you may
not operate your camcorder on your DVD
recorder even if its instruction manual says you
can. If you can set the input mode to HDV or
DV on your DVD recorder and can input/output
pictures, follow the steps in “Dubbing to another
device.”
Set [DOWN CONVERT] according to
the playback device (TV, etc.) (p. 85).
2
Prepare your VCR/DVD device for
recording.
When dubbing to the VCR, insert a
cassette for recording.
When dubbing to the DVD recorder,
insert a DVD for recording.
If your recording device has an input
selector, set it to the appropriate input
(such as video input1 and video input2).
3
4
Connect your VCR/DVD device to
your camcorder as a recording
device.
z Tips
• To record the date/time and camera settings data
when connected by the A/V connecting cable,
display them on the screen.
• When you use an i.LINK cable, the video and
sound signals are transmitted digitally,
producing high quality pictures.
Start playback on the camcorder,
and recording on the VCR/DVD
device.
• When an i.LINK cable is connected, the format
of the output signal (
) will be indicated on the LCD screen of
your camcorder.
or
Refer to the operating instructions
supplied with your recording device for
details.
5
When dubbing is complete, stop
your camcorder and the VCR/DVD
device.
97
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording pictures from a VCR
You can record pictures from a VCR on a
HDV1080i
compatible device
AVdevicewith
i.LINK jack
tape. You can record a scene as a still image
on a “Memory Stick Duo.” You can record
pictures in the HDV format by connecting
an HDV1080i specification compatible
device. Be sure to insert a cassette or a
“Memory Stick Duo” for recording in your
camcorder beforehand.
t HD quality
t SD quality
You can connect your camcorder to a VCR
device using an i.LINK cable.
To i.LINK connector
Connect your camcorder to the wall socket
using the supplied AC Adaptor/Charger for
instruction manuals supplied with the
devices to be connected.
: Signal
flow
b Notes
i.LINK cable
(optional)
• You need an i.LINK cable for this operation.
• You cannot perform this operation with the A/V
connecting cable.
• Your camcorder has a 6-pin i.LINK terminal.
Select a cable that fits the terminal on the device
to be attached.
To HDV/DV
interface
(i.LINK)
• Your camcorder can only record from a PAL
source. For example, French video or TV
programs (SECAM) cannot be recorded
correctly. See page 120 for details on TV color
systems.
• If you use a 21-pin adaptor to input PAL source,
you need a dual direction 21-pin adaptor
(optional).
* An i.LINK jack which is compatible with
HDV1080i specification is required.
Recording movies
1
2
Set the POWER switch to VCR.
Set the input signal of your
camcorder.
Set [VCR HDV/DV] to [AUTO] when
recording from an HDV format
compatible device.
Set [VCR HDV/DV] to [DV] or
[AUTO] when recording from a
DVCAM (DV) format compatible
98
Download from Www.Somanuals.com. All Manuals Search And Download.
b Notes
3
Connect your VCR as a player to
your camcorder.
• You cannot record TV programs from the
HDV/DV interface (i.LINK).
• User bits are not recorded when dubbing from a
DVCAM (DV) device via an i.LINK cable.
• You can record pictures from DV devices only
in the DVCAM (DV) format.
• Note the following when connecting with an
i.LINK cable:
When an i.LINK cable is connected, the
format of the input signal (
or
) will be
indicated on the LCD screen of your
camcorder (This indicator may appear
on the screen of the playback device but
it will not be recorded).
– The recorded picture becomes rough when a
picture is paused on your camcorder while
recording to a VCR.
– You cannot record the picture and sound
separately.
– If you pause or stop the recording and restart
it, the picture may not be recorded smoothly.
• If video signals inputted to your camcorder via
the HDV/DV jack experience the phenomenon
of jittering (variation in frequency), that jittering
is transmitted to the video signals outputted
from the COMPONENT OUT jack and A/V
OUT jack. When you monitor a movie on a TV
connected to your camcorder via the
4
5
Insert a cassette into the VCR.
Set your camcorder to recording
pause.
While pressing X (PAUSE), press both
z REC (record) buttons
simultaneously.
COMPONENT OUT jack or A/V OUT jack,
images may be distorted or not be displayed.
Jittering will not affect recording of the movie
on a tape with your camcorder but may affect
recording of the movie with another VCR
connected to your camcorder via the
COMPONENT OUT jack or A/V OUT jack.
z Tips
• When a 4:3 video signal is input, it appears with
black bands on the right and left sides on the
screen of your camcorder.
Recording still images
6
Start playing the cassette on your
VCR.
Be sure to insert a “Memory Stick Duo” for
recording in your camcorder beforehand,
and assign [PHOTO] to any of ASSIGN
buttons (p. 43).
The picture played on the VCR appears
on the LCD screen of your camcorder.
7
8
Press X (PAUSE) again at the
point you want to start recording.
1
Perform steps 1 to 4 in
“Recording movies.”
Press x (STOP) to stop
recording.
Continued ,
99
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording pictures from a VCR
(Continued)
Copying movies on a
tape to a computer
Connect your camcorder to the computer
with an i.LINK cable.
2
3
Start playing the cassette.
The computer needs to have an i.LINK
connector and be installed with editing
software that can copy video signals.
The software required depends on the
format of the recorded pictures and the
format for copying to the computer (HDV
or DVCAM (DV)) as shown in the table
below.
The pictures on the VCR appear on the
screen of your camcorder.
Press the ASSIGN button to
which [PHOTO] is assinged or the
PHOTO button on the remote
commander at the scene you
want to record.
Format for
Recorded
copying to
Required software
format
the computer
Editing software
capable of
copying HDV
signal
b Notes
HDV
HDV
• The image size is 1.2M when capturing a still
image from a movie recorded and played back
in the HDV format. The image size is 0.2M
when capturing a still image from a movie
recorded and played back in the DVCAM (DV)
and widescreen (16:9) formats, or VGA (0.3M)
when the movie is recorded and played back in
the DVCAM (DV) and 4:3 formats.
Editing software
DVCAM capable of
(DV) copying DVCAM
HDV
(DV) signal
Editing software
DVCAM
(DV)
DVCAM capable of
(DV) copying DVCAM
(DV) signal
b Notes
• The HDV/DV jack of your camcorder does
not have a power-supply function.
• You cannot copy movies using a USB cable.
• Refer to the operating instructions of the
software for the details on image copying.
• Refer to the operating instructions of the editing
software for the recommended connection.
• Some editing software on the computer may not
work correctly.
• You cannot change format DVCAM (DV) to
HDV.
The required menu settings vary depending
on the recorded images and the format
(HDV or DVCAM (DV)) to be copied to
the computer.
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Format for
copying to
the computer
Step:1 Connect an i.LINK cable
Recorded
format
Menu setting*
[VCR HDV/DV]
t [HDV]
[i.LINK SET] t
[HDV t DV
HDV
HDV
HDV
CONV] t [OFF]
[VCR HDV/DV]
t [HDV]
[i.LINK SET] t
[HDV t DV
CONV] t [ON]
HDV/DV interface
(i.LINK)
DVCAM
(DV)
i.LINK cable (optional)
[VCR HDV/DV]
t [DV]
[i.LINK SET] t
[HDV t DV
CONV] t [OFF]
DVCAM
(DV)
DVCAM
(DV)
Notes on connecting to the computer
z Tips
• Connect the i.LINK cable to the computer first,
then to your camcorder. Connecting in the
opposite order may cause static electricity to
build up, resulting in a malfunction of your
camcorder.
• The computer may freeze or may not recognize
the signal from your camcorder in the following
situations.
• To copy HDV format images as they are
without changing their format, an HDV
compatible environment is required.
For details, refer to your software instruction
manual or contact the software manufacturer.
• To play movies by a regular DVD player, you
need to create DVD video in the SD format. The
DVD video is not in the HDV format.
– Connecting your camcorder to a computer
that does not support the video signal formats
appearing on the LCD screen of your
camcorder display (HDV or DVCAM (DV)).
connected with an i.LINK cable.
– Changing [REC FORMAT] setting while
connected with an i.LINK cable with the
– Changing the POWER switch position while
connected with an i.LINK cable.
• The format (HDV or DVCAM (DV)) of input/
output signal appears on the LCD screen of your
camcorder while connected with an i.LINK
cable.
Continued ,
101
Download from Www.Somanuals.com. All Manuals Search And Download.
Copying movies on a tape to a computer (Continued)
When copying the movie in the
DVCAM (DV) format from the
computer to your camcorder
Step:2 Copying the movies
Use the supplied AC Adaptor/Charger to
obtain AC power (p. 14).
1 Prepare editing software (not provided).
2 Turn on your computer.
3 Insert a tape into your camcorder and set
the POWER switch to VCR.
4 Set the menu of your camcorder.
The menu settings vary depending on
the copying image.
5 Copy images to the computer with your
software.
b Notes
• If images are copied in HDV format but are not
recognized, your editing software may not
support HDV format. Convert the images to
DVCAM (DV) format according to step 4 and
copy again.
• A tape recorded in DVCAM (DV) format
cannot be copied to a computer in HDV format.
z Tips
• When images recorded in HDV format are
copied to a computer, the file size is about 2GB
(almost the same as a DV file) for a 10-minute
movie if the video compression format is
MPEG2.
When copying the movie in the HDV
format from the computer to your
camcorder
Set [VCR HDV/DV] to [HDV] and [HDV
t DV CONV] of [i.LINK SET] to [OFF]
b Notes
• To copy an HDV format movie edited on a
computer back onto a tape in HDV format is
possible so long as your editing software
supports copying HDV movies onto tape. For
details, contact the software manufacturer.
102
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Troubleshooting
If you run into any problems using your camcorder, use the following table to troubleshoot the
problem. If the problem persists, disconnect the power source and contact your Sony dealer.
• Power sources/LCD screen/Remote Commander···p. 103
• Cassette tapes/“Memory Stick Duo”···p. 104
• Recording···p. 105
• Playback···p. 108
• Connecting to TV···p. 110
• Dubbing/Editing/Connecting to other devices···p. 111
• Connecting to a computer···p. 111
Power sources/LCD screen/Remote Commander
The power does not turn on or abruptly turns off.
The camcorder does not operate even when the power is set to on.
• Disconnect the AC Adaptor/Charger from the wall socket or remove the battery pack, then
reconnect it after about 1 minute.
The camcorder gets warm.
• The camcorder may get warmer while you use it. This is not a malfunction.
The remaining battery time indicator does not indicate the correct time.
• Ambient temperature is too high or too low, or the battery pack has not been charged enough.
This is not a malfunction.
• Fully charge the battery again. If the problem persists, the battery may be worn-out. Replace
• The indicated time may not be correct in certain circumstances. For example, when you open
or close the LCD panel, it takes about 1 minute to display the correct remaining battery time.
The battery pack discharges too quickly.
• Ambient temperature is too high or low, or the battery pack has not been charged enough.
This is not a malfunction.
• Fully charge the battery again. If the problem persists, the battery may be worn-out. Replace
The picture remains on the LCD screen.
• This occurs if you disconnect the DK-415 cable or remove the battery pack without turning
off the power first. This is not a malfunction.
103
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (Continued)
The picture in the viewfinder is not clear.
The picture in the viewfinder has disappeared.
• If you change [VF POWERMODE] to [AUTO], the finder light remains off while the LCD
The supplied Remote Commander does not function.
• Set [REMOTE CTRL] to [ON] (p. 93).
• Remove any obstructions between the Remote Commander and the remote sensor.
• Keep strong light sources, such as sunlight or overhead lighting, away from the remote
sensor, otherwise the Remote Commander may not function properly.
• Insert a fresh battery in the compartment with its +/– terminals matching those of the
Another VCR malfunctions when you use the supplied Remote Commander.
• Select a commander mode other than VTR 2 for your VCR.
• Cover the sensor of your VCR with black paper.
Cassette tapes/“Memory Stick Duo”
The cassette cannot be ejected from the compartment.
• Make sure the power source (battery pack or AC Adaptor/Charger) is connected correctly
The Cassette Memory indicator or title display does not appear while using a
cassette with Cassette Memory.
• This camcorder does not support Cassette Memory, so the indicator does not appear.
The remaining tape indicator is not displayed.
• Set [
The cassette is noisier during rewinding or fast-forwarding.
• When using the DK-415 cable, rewind/fast forward speed increases (compared with battery
operation) and therefore increases noise. This is not a malfunction.
You cannot delete pictures or format the “Memory Stick Duo.”
• The pictures are protected. Release the protect function on your computer, etc.
104
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording
The recording does not start when you press the REC START/STOP button.
• The tape has reached the end. Rewind it, or insert a new cassette.
• The tape is stuck to the drum due to moisture condensation. Remove the cassette and leave
• Set [REC CTL MODE] of [EXT REC CTRL] to other than [EXT ONLY] (p. 86).
The handle zoom does not work.
You cannot record on the “Memory Stick Duo.”
• Assign [PHOTO] to an ASSIGN button (p. 43).
• The “Memory Stick Duo” is full. Delete unnecessary pictures recorded on the “Memory Stick
• You cannot record still images on the “Memory Stick Duo” in the following cases.
– While executing [FADER]
– While executing [SMTH SLW REC]
– When the shutter speed is set to slower than 1/50
– While using shot transition
– When [SCAN TYPE] is set to [25]
You cannot record a smooth transition on a tape from the last recorded scene
to the next.
• Do not record progressive pictures in different [REC TYPE] settings on the same tape.
• Do not remove the cassette (the picture will be recorded continuously without a break even
when you turn the power off).
• Do not record pictures in the HDV and DVCAM (DV) formats on the same tape.
• Do not record pictures in DVCAM mode and DV SP mode on the same tape.
The shutter sound is not heard when you record a still image.
• No shutter sound will be outputted during movie recording or while an external device is
connected.
Continued ,
105
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (Continued)
End search or last scene review does not work.
• There is nothing recorded on the cassette.
• There is a blank section between recorded sections of the tape. This is not a malfunction.
Auto focus does not function.
• Set the focus ring to mode B and press the ASSIGN button to which [FOCUS] is assigned
Menu items are grayed out or do not work.
• You cannot select grayed out display items in the current recording/playback situation.
• There are some functions you cannot activate simultaneously. The following list shows
examples of unworkable combinations of functions and menu items.
Cannot use
Situation
[BACK LIGHT],
[SPOTLIGHT]
Two or more of iris, gain, and shutter speed are set manually.
[AE SHIFT]
Iris, gain, and shutter speed are all set manually.
During [BACK LIGHT]
[CNTRST ENHCR]
[FADER]
No tape is inserted.
[D.EXTENDER]
[REC TYPE] of [HDV PROGRE.] is set to [PROGRESSIVE].
[REC TYPE] of [HDV PROGRE.] is set to [INTERLACE] and
[SCAN TYPE] is set to [25].
[SCAN TYPE] of [DV PROGRE.] is set to [25].
[ZEBRA], [PEAKING],
[CAM DATA DSP],
[HISTOGRAM]
During [COLOR BAR]
[SMTH SLW REC]
[REC TYPE] of [HDV PROGRE.] is set to [PROGRESSIVE].
[REC TYPE] of [HDV PROGRE.] is set to [INTERLACE] and
[SCAN TYPE] is set to [25].
[SCAN TYPE] of [DV PROGRE.] is set to [25].
[REC CTL MODE] of [EXT REC CTRL] is set to [EXT
ONLY].
During [COLOR BAR]
[MARKER]
During [DATE REC]
[LCD BL LEVEL],
[VF B.LIGHT]
During using AC power source
[FOCUS MACRO]
A Carl Zeiss lens is mounted, and the focus ring is set to
mode B.
A Carl Zeiss lens is not mounted.
[STEADYSHOT],
[FLANGE BACK]
A Carl Zeiss lens is not mounted.
106
Download from Www.Somanuals.com. All Manuals Search And Download.
Cannot use
Situation
[TC LINK]
Your camcorder is not connected to an external device via an
i.LINK cable.
[TC COUNTUP]
[TC MAKE] is set to [REGENERATE].
[UB-DATE/TC-TIME]
[TC MAKE] is set to [REGENERATE].
[TC RUN] is set to [REC RUN].
[UB TIME REC] is set to [ON].
Date and time are not set.
[WORLD TIME], [DATE Date and time are not set.
REC]
[x.v.Color]
[REC FORMAT] is set to [DV].
The shutter speed is not set to the
[ECS FREQ.]
[INTERVAL REC]
.
[REC CTL MODE] of [EXT REC CTRL] is set to [EXT
ONLY].
[REC TYPE] of [HDV PROGRE.] is set to [PROGRESSIVE].
[REC TYPE] of [HDV PROGRE.] is set to [INTERLACE] and
[SCAN TYPE] is set to [25].
[SCAN TYPE] of [DV PROGRE.] is set to [25].
[DV FRAME REC]
[EXT REC CTRL]
[REC CTL MODE] of [EXT REC CTRL] is set to [EXT
ONLY].
During [SMTH SLW REC]
During [INTERVAL REC]
During [DV FRAME REC]
Shutter speed, gain, white balance or iris cannot be adjusted manually.
• Set the AUTO/MANUAL switch to MANUAL.
Tiny spots in white, red, blue, or green appear on the screen.
The subjects passing by the frame very fast appear crooked.
• This is called the focal plane phenomenon. This is not a malfunction. Because of the way that
the image device (CMOS sensor) reads out image signals, the subjects passing by the frame
rapidly might appear crooked depending on the recording conditions.
The screen picture is bright, and the subject does not appear on the screen.
• Set [BACK LIGHT] to [OFF].
• Set [HYPER GAIN] to [OFF].
The screen picture is dark, and the subject does not appear on the screen.
• Press and hold the DISPLAY/BATT INFO button for a few seconds to turn on the backlight
Continued ,
107
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (Continued)
Horizontal stripes appear on the image.
• This occurs when recording pictures under a fluorescent lamp, sodium lamp, or mercury
Black bands appear when you record a TV screen or computer screen.
• This can be improved by adjusting the shutter speed in the extended clear scan (
) range
Fine patterns flicker, diagonal lines look jagged.
Playback
If you are playing back pictures stored on a “Memory Stick Duo,” refer also to the Cassette
tapes/“Memory Stick Duo” section (p. 104).
You cannot play back tape.
• Slide the POWER switch to VCR.
Image data stored on a “Memory Stick Duo” cannot be played back correctly.
• Image data cannot be played back if you have modified file names or folders, or have edited
• Pictures recorded on other devices may not be played back correctly. This is not a
malfunction.
The data file name is displayed incorrectly, or flashing.
• The file is damaged.
• Only the file name is displayed if the directory structure does not conform to the universal
standard.
Horizontal lines appear on the picture. The displayed pictures are not clear or
do not appear.
You cannot hear the sound recorded with 4CH microphone recording on
another camcorder.
• You cannot reproduce the sound recorded in CH3 and CH4 on your camcorder for the HDV
format 4-ch recording.
108
Download from Www.Somanuals.com. All Manuals Search And Download.
No sound or only a low sound is heard.
• Set [DV AUDIO MIX] (p. 78).
• Pictures recorded using [SMTH SLW REC] do not have sounds.
The picture or sound breaks off.
• The tape was recorded in both of the HDV and DVCAM (DV) formats. This is not a
malfunction.
The movies freeze for a while, or the sound breaks off.
• Use the Sony mini DV cassette tape.
“---” is displayed on the screen.
• The tape you are playing back was recorded without setting the date and time.
• A blank section on the tape is being played back.
• The data code on a tape with a scratch or noise cannot be read.
• A movie recorded in the extended clear scan (
) range is being played back.
• When a non-Carl Zeiss lens is attached, the iris value cannot be displayed.
Noises appear and
or
is displayed on the screen.
• The tape was recorded in a TV color system other than that of your camcorder (PAL). This is
not a malfunction.
Date Search does not work correctly.
• Be sure to record more than 2 minutes after the date changed. If one day’s recording is too
short, your camcorder may not accurately find the point where the recording date changes.
• There is a blank section between recorded sections of the tape. This is not a malfunction.
No picture appears during End search, Rec review or Last scene review.
• The tape was recorded in both HDV and DVCAM (DV) formats. This is not a malfunction.
New sound added to a recorded tape on another camcorder is not heard.
• Adjust [DV AUDIO MIX] from [CH1,CH2] (original sound) side until the sound is heard
appears on the LCD screen.
• This appears when you play back a tape recorded on other recording devices using a 4ch
microphone. This camcorder does not comply with the 4ch microphone recording standard.
Continued ,
109
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (Continued)
Connecting to TV
You cannot view the picture on the TV connected with the i.LINK cable.
• You cannot view the picture in the HD (high definition) quality on the TV if an i.LINK jack
manuals supplied with your TV.
• Down convert the pictures recorded in HDV format and play back in DVCAM (DV) format
You cannot hear the sound on the TV connected with the S VIDEO plug
(S VIDEO channel) or component video plug.
• If you are using an S VIDEO plug or component video plug, make sure the red and white
You cannot view the picture or hear the sound on the TV connected with the
component video cable.
• When you are using the component video cable, make sure the red and white plugs of the
You cannot view the picture or hear the sound on the TV connected with the
HDMI cable.
• Pictures in the HDV format are not output from the HDMI OUT jack, if copyright protection
signals are recorded in the pictures.
output.
• This occurs if you record on a tape in both HDV and DVCAM (DV) formats. Disconnect and
connect the HDMI cable, or slide the POWER switch to turn on your camcorder again.
The picture appears distorted on the 4:3 TV.
• This happens when viewing a picture recorded in 16:9 (wide) mode on a 4:3 TV. Select the
down conversion type from one of the following menus, depending on the recording format.
– If the recording format is HDV, select from [DOWN CONVERT] in [VIDEO OUT]
(p. 85).
– If the recording format is DVCAM (DV), select from [DV WIDE CONV] in [VIDEO
OUT] (p. 85)
Black zone appears at top and bottom of a 4:3 TV screen.
• This happens when viewing a picture recorded in the 16:9 (wide) mode on a 4:3 TV.
This is not a malfunction.
110
Download from Www.Somanuals.com. All Manuals Search And Download.
Dubbing/Editing/Connecting to other devices
Pictures from connected devices cannot be zoomed.
• You cannot zoom pictures from connected devices on your camcorder.
Time code and other information appear on the display of the connected
device.
• Set [DISP OUTPUT] to [LCD PANEL] while connected with an A/V connecting cable
You cannot dub correctly using the A/V connecting cable.
• The A/V connecting cable is not connected properly.
Make sure that the A/V connecting cable is connected to the input jack of the other device for
dubbing a picture from your camcorder.
When connected using an i.LINK cable, no picture appears on the monitor
screen during dubbing.
You cannot add sound to the recorded tape.
• You cannot add sound to the recorded tape on this unit.
You cannot dub correctly using the HDMI cable.
• You cannot dub pictures using the HDMI cable.
When you copy a movie shot in wide (16:9) format using an i.LINK cable, the
screen stretches vertically.
• You cannot output the aspect ratio setting using an i.LINK cable. Set the aspect ratio of the
TV instead.
• Connect using an A/V connecting cable instead.
Connecting to a computer
The computer does not recognize your camcorder.
• Disconnect the cable from the computer, then connect it again securely.
• Disconnect the cable from the computer, restart the computer, then connect the computer to
your camcorder correctly.
You cannot view or copy a movie recorded on a tape to a computer.
• Disconnect the cable from the computer, then connect it again.
• You need the editing software (optional) to copy a movie recorded on a tape to your computer
Continued ,
111
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting (Continued)
Your computer freezes.
• Set [VCR HDV/DV] correctly according to the connected device (p. 83).
• Disconnect the cable from your computer and camcorder. Reboot your computer, and
112
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning indicators and messages
Self-diagnosis display/Warning
indicators
101-1001(Warning indicator
pertaining to files)
• The file is damaged.
When an error occurs, a warning indicator
appears on the LCD screen or in the
viewfinder.
You can fix some problems associated with
the symptoms yourself. If the problem
persists even after you have tried a couple
of times, contact your Sony dealer or local
authorized Sony service facility.
E (Battery level warning)
• The battery pack is nearly used up.
• Depending on the operating,
environment, or battery conditions, E
may flash, even if there are
approximately 5 to 10 minutes
remaining.
C:(or E:) ss:ss (Self-diagnosis
display)
% (Moisture condensation warning)*
C:04:ss
• The battery pack is not an
“InfoLITHIUM” battery pack. Use an
• Eject the cassette, remove the power
source, and then leave it for about 1
C:21:ss
Q (Warning indicators pertaining to
• Moisture condensation has occurred.
Remove the cassette and leave your
camcorder for at least 1 hour, then re-
the tape)
Slow flashing:
• There is less than 5 minutes remaining
on the tape.
C:22:ss
• Clean the head using a cleaning
• No cassette is inserted.*
• The write-protect tab on the cassette is
C:31:ss / C:32:ss
• Symptoms that are not described above
have occurred. Remove and insert the
cassette, then operate your camcorder
again. Do not perform this procedure if
moisture condensation has occurred
• Remove the power source. Reconnect it
and operate your camcorder again.
• Change the cassette. Press the RESET
camcorder again.
Fast flashing:
• The tape has run out.*
Z (Eject cassette warning)*
Slow flashing:
• The write-protect tab on the cassette is
Fast flashing:
• Moisture condensation has occurred
(p. 123).
• The self-diagnosis display code is
E:61:ss / E:62:ss
• Contact your Sony dealer or local
authorized Sony service facility. Inform
them of the 5-digit code, which starts
from “E.”
melody when the warning indicators appear on
the screen.
Continued ,
113
Download from Www.Somanuals.com. All Manuals Search And Download.
Warning indicators and messages (Continued)
Warning messagess
If messages appear on the screen, follow the
instructions.
114
Download from Www.Somanuals.com. All Manuals Search And Download.
Additional Information
Using your camcorder abroad
Power supply
Viewing HDV format pictures recorded
in HDV format
You need an HDV1080i compatible TV (or
monitor) with a component jack and
AUDIO/VIDEO input jack or an HDMI
jack. You also need a component video
cable and A/V connecting cable or an
HDMI cable (optional).
You can use your camcorder in any
country/region using the AC Adaptor/
Charger supplied with your camcorder
within the AC 100 V to 240 V, 50/60 Hz
range.
On TV color systems
Your camcorder is PAL system, so its
picture can only be viewed on a PAL
system TV with an AUDIO/VIDEO input
jack.
Viewing DVCAM (DV) format pictures
recorded in DVCAM (DV) format
You need a TV with the AUDIO/VIDEO
input jack. A connecting cable is also
needed.
System
Used in
PAL
Australia, Austria, Belgium,
China, Czech Republic,
Denmark, Finland, Germany,
Holland, Hong Kong, Hungary,
Italy, Kuwait, Malaysia,
Simple setting of the clock by time
difference
New Zealand, Norway, Poland,
Portugal, Singapore,
Slovak Republic, Spain,
Sweden, Switzerland, Thailand,
United Kingdom, etc.
When you are abroad, you can easily adjust
the clock to the local time by setting the
time difference. Select [WORLD TIME],
then set the time difference (p. 91).
PAL - M Brazil
PAL - N Argentina, Paraguay, Uruguay.
SECAM Bulgaria, France, Guiana, Iran,
Iraq, Monaco, Russia, Ukraine,
etc.
NTSC
Bahama Islands, Bolivia,
Canada, Central America, Chile,
Colombia, Ecuador, Guyana,
Jamaica, Japan, Korea, Mexico,
Peru, Surinam, Taiwan,
the Philippines, the U.S.A.,
Venezuela, etc.
115
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and precautions
Copyright signal
HDV format and recording/
playback
x When you play back
If the cassette you play back on your
camcorder contains copyright signals, you
cannot copy it to a tape in another video
camera connected to your camcorder.
Your camcorder is capable of recording in
HDV/DVCAM/DV formats.
It is recommended to use a cassette with the
mark to record in the HDV/
x When you record
DVCAM/DV format.
You cannot record software on your
camcorder that contains copyright control
signals for copyright protection of software.
[Cannot record due to copyright
It is recommended to use a cassette with the
mark to record in the DVCAM
format.
Your camcorder is not compatible with the
Cassette Memory function.
protection.] appears on the LCD screen, or
on the viewfinder if you try to record such
software. Your camcorder does not record
copyright control signals on the tape when
it records.
What is the HDV format?
The HDV format is a video format
developed to record and play back digital
high definition (HD) video signals on a DV
cassette.
Your camcorder adopts the Interlace mode
with 1,080 effective scan lines of screen
ruling (1080i, number of pixels 1,440 ×
1,080 dots).
The video bit rate for recording is about 25
Mbps.
i.LINK is adopted for the digital interface,
enabling a digital connection with an HDV
compatible TV or computer.
Audio mode
The DVCAM format has 2 audio modes.
• You cannot dub sound onto a recorded tape with
your camcorder.
x FS32K (12-bit) mode
The original sound is recorded in channels
1 and 2, and the new sound in channels 3
and 4. The balance between channels 1/2
and channels 3/4 can be adjusted by
selecting [DV AUDIO MIX] in the menu
settings during playback. If you select
[MIX], the sounds of channel 1/2 and
channel 3/ 4 are synthesized to be output.
• HDV signals are compressed in MPEG2 format,
which is adopted in BS (broadcast satellite)
digital, terrestrial digital HDTV broadcastings,
in Blu-ray Disc recorders, etc.
x FS48K (16-bit) mode
Playback
The original sound can be recorded in high
quality using 2 channels. The audio mode
can be indicated on the LCD screen or in
the viewfinder.
• Your camcorder can play back pictures in both
the DVCAM (DV) format and HDV1080i
specification.
• Your camcorder can play back pictures recorded
in the HDV 720/30p format, but cannot output it
from the HDV/DV interface (i.LINK).
Notes on use
x When not using your camcorder for a
long time
Remove the cassette and store it.
To prevent a blank section from being
created on the tape
Go to the end of the recorded section using
the next recording when you have played
back the tape.
116
Download from Www.Somanuals.com. All Manuals Search And Download.
x To prevent accidental erasure
Slide the write-protect tab on the cassette to
set it to SAVE.
On Sony HDV1080i compliant TVs
An HDV format compatible TV with the
component input jack is required to view
playback pictures recorded in the HDV
format.
REC: The cassette can be
recorded.
SAVE: The cassette cannot be
recorded (write-protected).
Compatibility of the DVCAM/DV
formats
REC
SAVE
The DVCAM format was developed as a
more reliable and higher-end format than
the consumer DV format. Explained here
are the differences, compatibility, and
limitations on editing for the DVCAM and
DV formats.
x When labeling the cassette
Be sure to place the label only on the
locations shown in the following
illustration so as not to cause a malfunction
of your camcorder.
Differences between the DVCAM and
DV formats
Do not put a label
along this border.
Specification
DVCAM
DV
TRACK
Pitch
15 µm
10 µm
Labeling position
Audio
sampling
frequency
12 bit:32
kHz
16 bit:48
kHz
12 bit:32 kHz
16 bit:48 kHz
44.1 kHz
x After using the cassette
Rewind the tape to the beginning to avoid
distortion of the picture or the sound. The
cassette should then be put in its case, and
stored in an upright position.
48 kHz
Audio
recording
mode*
Lock mode
Lock/Unlock
mode
x When cleaning the gold-plated
connector
* There are 2 modes for audio recording, lock
mode and unlock mode. In lock mode, the
sampling frequencies of audio and video are
synchronized. Therefore, lock mode is more
effective than unlock mode in digital
processing and smooth transition during audio
editing.
Generally, clean the gold-plated connector
on a cassette with a cotton-wool swab after
every 10 times it has been ejected.
If the gold-plated connector on the cassette
is dirty or dusty, the remaining tape
indicator may not show correctly.
Gold-plated connector
Continued ,
117
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and precautions (Continued)
Mini DVCAM and mini DV cassettes
The recording format of the picture is
defined according to the recorder’s format
as described below.
Compatibility on editing using DV
jacks
When this camcorder is connected to other
digital video equipment using an i.LINK
cable, the recording format of edited tapes
is defined according to the source tape and
the recorder’s format as described below.
Playback or editing using the edited tape
may be limited depending on dubbing
operation. Start dubbing after reading
Recorder’s
format
Cassette’s
format
Recording
format
DVCAM
DVCAM
DV
DVCAM
DV
DVCAM
DV
DV
b Notes
Source
tape
Player’s
format
Recorder’s Recording
format format
• This camcorder complies with the DVCAM
format.Though mini DV cassettes can be used
for recording, we recommend you use mini
DVCAM cassettes to get the most out of the
high reliability of the DVCAM format.
• The recording time of mini DV cassettes is 1/3
shorter than that indicated on mini DV cassettes
when recorded in the DVCAM format.
DV
DVCAM DVCAM DVCAM 1)
formatted
(SP mode
only)
DV
DV
DV
formatted
DV
DVCAM DVCAM
DV DV
DVCAM DVCAM DVCAM DVCAM
formatted
Compatibility on playback
DV
DV
2)
Tape
On DV video
equipment
On DVCAM
video
DVCAM DV 3)
DVCAM DVCAM
equipment
formatted
2)
(Compatib
ility
DV
Can be
Can be
formatted
playback
played back
only when
recorded in
SP mode
depends
on
models.)
DV
DV
DVCAM
formatted
Can be
played back playback
on some
Can be
1) When using mini DVCAM video equipment to
perform DV dubbing of a tape recorded in DV
format, the tape produced will be in the
DVCAM format which the time code format
will be partly misadjusted. (there will be no
effect on the recorded picture except in certain
cases.)
equipment
2) If the tape that is to be dubbed is in the DVCAM
format as in 1), the tape produced will be in the
DVCAM format and the time code format will
be partly misadjusted.
3) Some mini DV video equipment may be able to
play back a DVCAM-formatted tape. Even if
the tape is played back, quality of the playback
cannot be guaranteed. The time code format will
be partly misadjusted.
118
Download from Www.Somanuals.com. All Manuals Search And Download.
Photographic Experts Group) format. The file
extension is “.JPG.”
• A “Memory Stick Duo” formatted by a
computer (Windows OS/Mac OS) does not have
guaranteed compatibility with your camcorder.
b Notes
• If you use tapes as in 1) to 3) above for editing,
the functions may be limited regardless of the
format of players and recorders.
• Data read/write speed may vary depending on
the combination of the “Memory Stick Duo”
and “Memory Stick Duo” compliant product
you use.
• You can prevent accidental erasure of images
when you slide the write-protect tab on the
“Memory Stick Duo” with a small tapered
object, to the write-protect position.
• Damaged or lost image data will not be
compensated for, and may occur in the
following cases:
– If you eject the “Memory Stick Duo,” turn the
power off on your camcorder, or remove the
battery pack for replacement while your
camcorder is reading or writing image files on
the “Memory Stick Duo” (while the access
lamp is lit or flashing).
Limitations on editing
You may find the following limitations
when editing a tape produced by dubbing or
editing using the HDV/DV Interface
(i.LINK) jack:
• Due to the difference in track pitch, you cannot
record or edit on DV-formatted tapes using mini
DVCAM video equipment.
• Depending on the DVCAM video equipment
used, you may not be able to edit DVCAM
formatted tapes if the audio recording mode is
unlock mode. In this case, dub using audio/
video jacks.
About the “Memory Stick”
– If you use the “Memory Stick Duo” near
magnets or magnetic fields.
• It is recommended to make a back-up of
important data on the hard disk of a computer.
• Be careful not to apply excessive force when
writing on a memo area on a “Memory Stick
Duo.”
• Do not attach a label or the like on a “Memory
Stick Duo” or a Memory Stick Duo adaptor.
• When you carry or store a “Memory Stick Duo,”
put it in its case.
• Do not touch, or allow metallic objects to come
into contact with the terminals.
• Do not bend, drop or apply strong force to the
“Memory Stick Duo.”
A “Memory Stick” is a compact, portable
IC recording medium with a large data
capacity.
You can use the following types of
“Memory Stick” listed below on the
camcorder. However, we do not guarantee
the operation of all types of “Memory
Stick” on your camcorder. (See the list
below for more details.)
Recording
Types of “Memory Stick”
/Playback
“Memory Stick Duo”
(with MagicGate)
a
“Memory Stick PRO Duo”
a
a
• Do not disassemble or modify the “Memory
Stick Duo.”
• Do not let the “Memory Stick Duo” get wet.
• Be careful to keep “Memory Stick Duo” media
out of the reach of small children. There is
danger that a child might swallow it.
• Do not insert anything other than a “Memory
Stick Duo” into the Memory Stick Duo slot.
Doing so may cause a malfunction.
• Do not use or keep the “Memory Stick Duo” in
the following locations:
– Places subject to extremely high temperature,
such as a car parked outside in the summer.
“Memory Stick PRO-HG Duo”
• This product does not support high speed data
transfer via a parallel interface.
• This product cannot record or play data that uses
“MagicGate” technology. “MagicGate” is a
copyright protection technology that records and
transfers the contents in an encrypted format.
• This product is compatible with “Memory Stick
Micro” (“M2”). “M2” is the abbreviation for the
“Memory Stick Micro.”
• Still image format: Your camcorder compresses
and records image data in the JPEG (Joint
– Places under direct sunlight.
Continued ,
119
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and precautions (Continued)
– Places with extremely high humidity or
subject to corrosive gases.
conform to the universal standard. (These
models are not sold in some regions.)
• If you cannot use a “Memory Stick Duo” that
has been used with another device, format it
formatting erases all information on the
“Memory Stick Duo.”
• You may not be able to play back images with
your camcorder:
– When playing back image data modified on
your computer.
x On the Memory Stick Duo adaptor
• When using a “Memory Stick Duo” with a
“Memory Stick” compliant device, make sure to
insert the “Memory Stick Duo” into a Memory
Stick Duo adaptor.
• When inserting a “Memory Stick Duo” into a
Memory Stick Duo adaptor, make sure the
“Memory Stick Duo” is inserted facing in the
correct direction, then insert it all the way in.
Note that improper use may cause a
malfunction. Also, if you force the “Memory
Stick Duo” into the Memory Stick Duo adaptor
in the wrong direction, it may be damaged.
• Do not insert a Memory Stick Duo adaptor
without a “Memory Stick Duo” attached. Doing
so may result in malfunctions of the unit.
– When playing back image data recorded with
other devices.
About the “InfoLITHIUM”
battery pack
This unit is compatible with an
“InfoLITHIUM” battery pack (L series).
Your camcorder operates only with an
“InfoLITHIUM” battery pack.
x On a “Memory Stick PRO Duo”
• The maximum memory capacity of a “Memory
Stick PRO Duo” that can be used on your
camcorder is 8 GB.
“InfoLITHIUM” L series battery packs
• This unit does not support high speed data
transfer.
have the
mark.
What is an “InfoLITHIUM” battery
pack?
An “InfoLITHIUM” battery pack is a
lithium-ion battery pack that has functions
for communicating information related to
operating conditions between your
camcorder and an supplied AC Adaptor/
Charger.
The “InfoLITHIUM” battery pack
calculates the power consumption
according to the operating conditions of
your camcorder, and displays the remaining
battery time in minutes.
Notes on using “Memory Stick Micro”
• To use a “Memory Stick Micro” with the
camcorder, you need a Duo-sized M2 Adaptor.
Insert the “Memory Stick Micro” into the Duo-
sized M2 Adaptor, then insert the adaptor into
the Memory Stick Duo slot. If you insert a
“Memory Stick Micro” into the camcorder
without using a Duo-sized M2 Adaptor, you
might not be able to remove it from the
camcorder.
• Do not leave the “Memory Stick Micro” within
the reach of small children. They might
accidentally swallow it.
With an AC Adaptor/Charger, the
remaining battery time and charging time
appear.
On image data compatibility
• Image data files recorded on a “Memory Stick
Duo” by your camcorder conform to the
“Design rule for Camera File system” universal
standard established by the JEITA (Japan
Electronics and Information Technology
Industries Association).
To charge the battery pack
• Be sure to charge the battery pack before you
start using your camcorder.
• On your camcorder, you cannot play back still
images recorded on other devices (DCR-
TRV900E or DSC-D700/D770) that do not
• We recommend charging the battery pack in an
ambient temperature of between 10 °C to 30 °C
(50 °F to 86 °F) until the charge lamp of the AC
Adaptor/Charger turns off. If you charge the
120
Download from Www.Somanuals.com. All Manuals Search And Download.
battery pack outside of this temperature range,
you may not be able to charge it efficiently.
About storage of the battery pack
• If the battery pack is not used for a long time,
fully charge the battery pack and use it up on
your camcorder once a year to maintain proper
function. To store the battery pack, remove it
from your camcorder and put it in a dry, cool
place.
• To discharge the battery pack on your
camcorder completely, leave your camcorder in
tape recording standby until the power goes off
To use the battery pack effectively
• Battery pack performance decreases when the
surrounding temperature is 10 °C (50 °F) or
below, and the length of time you can use the
battery pack becomes shorter. In that case, do
one of the following to use the battery pack for a
longer time.
– Put the battery pack in a pocket to warm it up,
and insert it in your camcorder right before
you start taking shots.
– Use a large capacity battery pack: NP-F770/
F970 (optional).
• Frequent use of the LCD screen or a frequent
playback, fast forward or rewind operation
wears out the battery pack faster.
About battery life
• Battery capacity decreases over time and
through repeated use. If decreased usage time
between charges becomes significant, it is
probably time to replace it with a new one.
• Each battery’s life is governed by storage,
operating and environmental conditions.
We recommend using a large capacity battery
pack: NP-F770/F970.
• Be sure to set the POWER switch to OFF when
not recording or playing back on your
camcorder. The battery pack is also consumed
when your camcorder is in recording standby or
playback pause.
• Have spare battery packs ready for two or three
times the expected recording time, and make
trial recordings before making the actual
recording.
About i.LINK
The HDV/DV (i.LINK) jack on your
camcorder is an i.LINK-compliant 6-pin
jack. This section describes the i.LINK
standard and its features.
What is i.LINK?
• Do not expose the battery pack to water. The
battery pack is not water resistant.
i.LINK is a digital serial interface for
transferring digital video, digital audio, and
other data to other i.LINK-compatible
devices. You can also control other devices
using the i.LINK.
About the remaining battery time
indicator
• When the power goes off even though the
remaining battery time indicator indicates that
the battery pack has enough power to operate,
charge the battery pack fully again. Remaining
battery time will be indicated correctly. Note,
however, that the battery indication will not be
restored if it is used in high temperatures for a
long time, or if left in a fully charged state, or
when the battery pack is frequently used. Use
the remaining battery time indication as a rough
guide only.
i.LINK-compatible devices can be
connected using an i.LINK cable. Possible
applications are operations and data
transactions with various digital AV
devices.
When two or more i.LINK-compatible
devices are daisy-chained with the unit,
operation becomes possible from any
device in the chain. Note that operation
method may vary, or data transactions may
not be possible, depending on specifications
and characteristics of the connected
devices.
• The E mark that indicates low battery flashes
even if there are still 5 to 10 minutes of battery
time remaining, depending on the operating
conditions or ambient temperature.
Continued ,
121
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and precautions (Continued)
b Notes
not compatible with this unit. Before
connecting to other devices, be sure to
confirm whether the device is compatible
with an HDV/DV device or not. For details
on precautions and compatible application
software, refer also to the operating
• Normally, only one device can be connected to
this unit with an i.LINK cable. When
connecting this unit to an HDV/DV compatible
device having two or more HDV/DV
interfaces, refer to the operating instructions of
the device to be connected.
• i.LINK is a more familiar term for the IEEE
1394 data transport bus proposed by Sony, and
is a trademark approved by many corporations.
• IEEE 1394 is an international standard
standardized by the Institute of Electrical and
Electronics Engineers.
instructions for the device to be connected.
b Notes
• When connecting a device with an i.LINK
terminal to your camcorder via an i.LINK cable,
switch off the device and unplug it from the
power socket before plugging in or unplugging
the i.LINK cable.
About the i.LINK Baud rate
i.LINK’s maximum baud rate varies
according to the device. There are 3 types.
About x.v.Color
• x.v.Color is a more familiar term for the
xvYCC standard proposed by Sony, and is
a trademark of Sony.
S100 (approx. 100Mbps*)
S200 (approx. 200Mbps)
S400 (approx. 400Mbps)
• xvYCC is an international standard for
color space in video. This standard can
express a wider color range than the
currently used broadcast standard.
The baud rate is listed under
“Specifications” in the operating
instructions of each piece of equipment. It
is also indicated near the i.LINK interface
on some devices.
The baud rate may differ from the indicated
value when the unit is connected to a device
with a different maximum baud rate.
About handling of your
camcorder
On use and care
• Do not use or store the camcorder and
accessories in the following locations.
– Anywhere extremely hot or cold. Never leave
them exposed to temperatures above 60 °C
(140 °F), such as under direct sunlight, near
heaters or in a car parked in the sun. They
may malfunction or become deformed.
* What is Mbps?
Mbps stands for “megabits per second,” or
the amount of data that can be sent or
received in one second. For example, a
baud rate of 100 Mbps means that 100
megabits of data can be sent in one second.
– Near strong magnetic fields or mechanical
vibration. The camcorder may malfunction.
To use i.LINK functions on this unit
For details on how to dub when this unit is
connected to other video devices having an
This unit can also be connected to other
i.LINK-compatible devices made by Sony
(for example, a VAIO series personal
computer) as well as to video devices.
Some i.LINK compatible video devices,
such as Digital Televisions, DVD,
– Near strong radio waves or radiation. The
camcorder may not be able to record properly.
– Near AM receivers and video equipment.
Noise may occur.
– On a sandy beach or anywhere dusty. If sand
or dust gets in your camcorder, it may
malfunction. Sometimes this malfunction
cannot be repaired.
– Near windows or outdoors, where the LCD
screen, the viewfinder, or the lens may be
MICROMV or HDV recorders/players are
122
Download from Www.Somanuals.com. All Manuals Search And Download.
exposed to direct sunlight. This damages the
inside of the viewfinder or the LCD screen.
– Anywhere very humid.
• Operate your camcorder on DC 7.2 V (battery
pack) or DC 8.4 V (AC Adaptor).
• For DC or AC operation, use the accessories
recommended in these operating instructions.
• Do not let your camcorder get wet, for example,
from rain or sea water. If your camcorder gets
wet, it may malfunction. Sometimes this
malfunction cannot be repaired.
condense inside your camcorder, on the
surface of the tape, or on the lens. In this
state, the tape may stick to the head drum
and be damaged or your camcorder may not
operate correctly. If there is moisture inside
your camcorder, [Moisture condensation.
Eject the cassette] or [Moisture
condensation. Turn off for 1H.] appears.
The indicator will not appear when the
moisture condenses on the lens.
• If any solid object or liquid gets inside the
casing, unplug your camcorder and have it
checked by a Sony dealer before operating it
any further.
• Avoid rough handling, disassembling,
modifying, physical shock, or impact such as
hammering, dropping or stepping on the
product. Be particularly careful of the lens.
x If moisture condensation has occurred
None of the functions except cassette
ejection will work. Eject the cassette, turn
off your camcorder, and leave it for about
one hour with the cassette lid open. Your
camcorder can be used again when both of
the following conditions are met:
• The warning message does not appear when the
power is turned on.
• Keep the POWER switch setting to OFF when
you are not using your camcorder.
• Neither % nor Z flashes when a cassette is
inserted and the video operation buttons are
pressed.
• Do not wrap your camcorder with a towel, for
example, and operate it. Doing so might cause
heat to build up inside.
If moisture starts to condense, your
camcorder sometimes cannot detect
condensation. If this happens, the cassette is
sometimes not ejected for 10 seconds after
the cassette lid is opened. This is not a
malfunction. Do not close the cassette lid
until the cassette is ejected.
• When disconnecting the mains lead, pull it by
the plug and not the lead.
• Do not damage the mains lead such as by
placing anything heavy on it.
• Keep metal contacts clean.
• Keep the Remote Commander and button-type
battery out of children’s reach. If the battery is
accidentally swallowed, consult a doctor
immediately.
• If the battery electrolytic liquid has leaked,
– consult your local authorized Sony service
facility.
x Note on moisture condensation
Moisture may condense when you bring
your camcorder from a cold place into a
warm place (or vice versa) or when you use
your camcorder in a humid place as shown
below.
– wash off any liquid that may have contacted
your skin.
• When you bring your camcorder from a ski
slope into a place warmed up by a heating
device.
• When you bring your camcorder from an air
conditioned car or room into a hot place outside.
– if any liquid gets in your eyes, wash with
plenty of water and consult a doctor.
x When not using your camcorder for a
long time
• Periodically turn on the camcorder and play a
cassette for about 3 minutes.
• When you use your camcorder after a squall or a
shower.
• Use up the battery pack completely before
storing it.
• When you use your camcorder in a hot and
humid place.
x How to avoid moisture condensation
When you bring your camcorder from a
cold place into a warm place, put your
Moisture condensation
If your camcorder is brought directly from a
cold place to a warm place, moisture may
Continued ,
123
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance and precautions (Continued)
camcorder in a plastic bag and seal it
tightly. Remove the bag when the air
temperature inside the plastic bag has
reached the surrounding temperature (after
about one hour).
Block-noise
appears.
Video head
If you play back a tape recorded in HDV
format, the image and sound may freeze for
a while (about 0.5 seconds).
This occurs if the HDV signals cannot be
recorded or played back correctly because
The playback screen goes blank.
(Solid blue screen)
of dirt on the tape or video head. Depending
on the cassette, this fairly infrequently
occurs even if the cassette is brand new or
is not used a lot.
If this freezing point is created while
playing back, you can solve this problem
and see the pictures by rewinding after
slightly forwarding. Such a freezing point
cannot be recovered if it was created while
recording.
To prevent such a problem, use the Sony
mini DV cassette.
• If the following problem occurs, clean the video
heads for 10 seconds with the Sony cleaning
cassette (optional).
• The video heads will be worn after long use. If
you cannot obtain a clear image even after using
a cleaning cassette (optional), the video heads
may be worn out. Please contact your Sony
dealer or local authorized Sony service facility
to have the video heads replaced.
LCD screen
• Do not exert excessive pressure on the LCD
screen, as it may cause damage.
• If your camcorder is used in a cold place, a
residual image may appear on the LCD screen.
This is not a malfunction.
• While using your camcorder, the back of the
LCD screen may heat up. This is not a
malfunction.
– Playback pictures do not move.
– Playback pictures do not appear.
– The sound breaks off.
x To clean the LCD screen
If fingerprints or dust make the LCD screen
dirty, it is recommended you use a soft
cloth to clean it. When you use the LCD
Cleaning Kit (optional), do not apply the
cleaning liquid directly to the LCD screen.
Use cleaning paper moistened with the
liquid.
– [x
Dirty video head. Use a cleaning
cassette.] appears on the screen during
recording.
– The following phenomenon occurs in HDV
format.
On handling the casing
• If the casing is soiled, clean the camcorder body
with a soft cloth lightly moistened with water,
and then wipe the casing with a dry soft cloth.
The playback The playback screen
screen pauses. goes blank.
(Solid blue screen)
• Avoid the following to avoid damage to the
finish.
– Using chemicals such as thinner, benzine,
alcohol, chemical cloths, repellent, insecticide
and sunscreen.
– The following phenomenon occurs in
DVCAM (DV) format.
– Handling with above substances on your
hands.
124
Download from Www.Somanuals.com. All Manuals Search And Download.
– Leaving the casing in contact with rubber or
vinyl objects for a long period of time.
Removing dust from inside the
viewfinder
About care and storage of the lens
• Wipe the surface of the lens clean with a soft
cloth in the following instances:
– When there are fingerprints on the lens
surface.
– In hot or humid locations
– When the lens is exposed to salty air such as
at the seaside.
1
Remove the eye piece of the
viewfinder.
Slide down the viewfinder release lever
and hold it at the position (1), then lift
the eye piece of the viewfinder as
indicated with the arrow in the
illustration (2).
• Store in a well-ventilated location subject to
little dirt or dust.
• To prevent mold, periodically clean the lens as
described above. It is recommended that you
operate your camcorder about once a month to
keep it in optimum state for a long time.
On charging the pre-installed
rechargeable battery
Your camcorder has a pre-installed
rechargeable battery to retain the date, time,
and other settings even when the POWER
switch is set to OFF. The pre-installed
rechargeable battery is always charged
while your camcorder is connected to the
wall socket via the AC Adaptor or while the
battery pack is inserted. The rechargeable
battery will be fully discharged in about 3
months if you do not use your camcorder
at all without the AC Adaptor connected or
the battery pack attached. Use your
2
Remove dust inside the eye piece
and viewfinder with a blower.
camcorder after charging the pre-installed
rechargeable battery.
However, even if the pre-installed
rechargeable battery is not charged, the
camcorder operation will not be affected as
long as you are not recording the date.
x Procedures
Connect your camcorder to a wall socket
using the supplied AC Adaptor, and leave it
with the POWER switch set to OFF for
more than 24 hours.
125
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Fast forward/rewind time
Approx. 2 min 40 s (using a PHDVM-
63DM cassette and rechargeable
battery pack)
Approx. 1 min 45 s (using a PHDVM-
63DM cassette and AC Adaptor)
Viewfinder
System
Video recording system (HDV)
2 rotary heads, Helical scanning system
Video recording system (DVCAM (DV))
2 rotary heads, Helical scanning system
Still image recording system
Exif Ver. 2.2*
Audio recording system (HDV)
Rotary heads, MPEG-1 Audio Layer-2,
Quantization: 16 bits
Fs48kHz (stereo)
transfer rate: 384 kbps
Audio recording system (DVCAM (DV))
Rotary heads, PCM system
Quantization: 12 bits
Fs32kHz (channel 1/2 stereo),
Quantization: 16 bits
Fs48kHz (channel 1/2 stereo)
Video signal
PAL color, CCIR standards
1080/50i specification
Usable cassette
Electric viewfinder (color, black and
white)
Picture
1.1cm (0.45 type, aspect
ratio 16:9)
Total dot number
1 226 880 (approx. 852 × 3[RGB] ×
480)
Image device
6.0 mm (1/3 type) 3CMOS sensor
Recording Pixels (HDV/DV16:9 still
recording):
Max. 1.20 Mega (1 440 × 810) pixels**
Gross: Approx. 1 120 000 pixels
Effective (movie, 16:9):
1 037 000 pixels
Effective (movie, 4:3):
778 000 pixels
Effective (still, 16:9):
1 037 000 pixels
Mini DV cassette with the
printed or Mini DVCAM cassette with
the mark printed
mark
Tape speed (HDV)
Approx. 18.812 mm/s
Tape speed (DVCAM)
Approx. 28.218 mm/s
Effective (still, 4:3):
778 000 pixels
Lens
Tape speed (DV SP)
Carl Zeiss Vario-Sonnar T
12 × (Optical), Approx. 18 × (Digital,
when [D.EXTENDER] is set to [ON])
Focal length
Approx. 18.812 mm/s
Recording/playback time (HDV)
63 min (using a PHDVM-63DM
cassette)
Recording/playback time (DVCAM)
41 min (using a PHDVM-63DM
cassette)
Recording/playback time (DV SP)
63 min (using a PHDVM-63DM
cassette)
f=4.4 - 52.8 mm (3/16 - 2 1/8 in.)
When converted to a 35 mm still
camera
32.0 - 384 mm (1 5/16 - 15 1/8 in.)
(16:9),
39.5 - 474 mm (1 9/16 - 18 3/4 in.)
(4:3)
F1.6 - 2.0
Filter diameter: 72 mm (2 7/8 in.)
126
Download from Www.Somanuals.com. All Manuals Search And Download.
Color temperature
Input/Output connectors
[AUTO]
(one push) A/B
[INDOOR] (3 200K)
[OUTDOOR] (5 800K 7 offset levels)
[MANU WB TEMP] (2 300K -
15 000K in 100K steps)
LANC
jack
Stereo mini-minijack (Ø 2.5 mm)
i (headphones) jack
Stereo-minijack (Ø 3.5 mm)
LENS jack
12-pin connector
INPUT1/INPUT2 jack
XLR 3-pin, female,
-48 dBu: 3kΩ (kilohms)
+4 dBu: 10kΩ (kilohms)
(0 dBu=0.775 Vrms)
HDV/DV jack
i.LINK interface (IEEE 1394, 6-pin
connector S100)
Minimum illumination
1.5 lx (lux) (Fixed Shutter Speed 1/25,
auto gain, auto iris) (F 1.6)
* “Exif” is a file format for still images,
established by the JEITA (Japan
Electronicsand InformationTechnology
Industries Association). Files in this
format can have additional information
such as your camcorder’s setting
information at the time of recording.
**Still image resolution is obtained by the
unique pixel array of Sony’s ClearVid
CMOS Sensor and image processing
system (new Enhanced Imaging
Processor).
LCD screen
Picture
8.0 cm (3.2 type, aspect ratio 16:9)
Total dot number
921 600 (1 920 × 480)
General
Power requirements
Output connectors
A/V OUT jack
DC 7.2 V (battery pack)
DC 8.4 V (AC Adaptor)
Average power consumption*
During camera recording using the
microphone ECM-XM1 and viewfinder
with normal brightness:
10-pin connector
Video signal: 1 Vp-p, 75 Ω(ohms)
Luminance signal: 1 Vp-p, 75 Ω(ohms)
Chrominance signal: 0.3 Vp-p (burst
signal), 75 Ω(ohms)
Audio signal: -10 dBu (at load
impedance 47 kΩ(kilohms)), Output
impedance with less than 2.2 kΩ
(kilohms)
HDV recording 7.0 W
DVCAM (DV) recording 6.8 W
During camera recording using the
microphone ECM-XM1 and LCD with
normal brightness:
(0 dBu=0.775 Vrms)
COMPONENT OUT jack
Y: 1 Vp-p, 75Ω(ohms), PB/PR, CB/CR:
+/- 350 mV, 75 Ω(ohms)
HDMI OUT jack
HDV recording 7.1 W
DVCAM (DV) recording 6.9 W
Operating temperature
0 °C to 40 °C (32 °F to 104 °F)
Storage temperature
TypeA (19-pin)
-20 °C to + 60 °C (-4 °F to + 140 °F)
Continued ,
127
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications (Continued)
Dimensions (approx.)
Rechargeable battery pack NP-F570
Maximum output voltage
DC 8.4 V
Output voltage
DC 7.2 V
Capacity
176 × 199 × 439 mm
(6 15/16 × 7 13/16 × 17 9/32 in.)
(w/h/d)
including the projecting parts
176 × 199 × 439 mm
(6 15/16 × 7 13/16 × 17 9/32 in.)
(w/h/d)
15.8 Wh (2 200 mAh)
Type
including the projecting parts with the
battery pack (NP-F570)
Li-ion
Design and specifications are subject to change
without notice.
Mass (approx.)
1.3 kg (2 lb 13 oz) camera body only
2.4 kg (5 lb 4 oz) including the Carl
Zeiss lens (VCL-412BWH)
2.8 kg (6 lb 3 oz) including the battery
pack (NP-F570), cassette (PHDVM-
63DM), Carl Zeiss lens (VCL-
412BWH), lens hood with lens cover
and microphone (ECM-XM1)
* When the HVR-MRC1 is used, the average
power consumption increases about 2.5 W.
AC Adaptor/Charger AC-VQ1050
Power requirements
AC 100 V - 240 V, 50/60 Hz
Power consumption
22 W
Output voltage
DC 8.4 V*
Operating temperature
0 °C to 40 °C (32 °F to 104 °F)
Storage temperature
-20 °C to + 60 °C (-4 °F to + 140 °F)
Dimensions (approx.)
123 × 53 × 135 mm
(4 7/8 × 2 1/8 × 5 3/8 in.) (w/h/d)
excluding the projecting parts
Mass (approx.)
390 g (13.8 oz) excluding the power
cord
* See the label on the AC Adaptor/Charger for
other specifications.
128
Download from Www.Somanuals.com. All Manuals Search And Download.
On trademarks
Notes on the License
• “Memory Stick,” “
Duo,” “
PRO Duo,” “
“Memory Stick PRO-HG Duo,”
“
,” “Memory Stick
,” “Memory Stick
,”
ANY USE OF THIS PRODUCT OTHER THAN
CONSUMER PERSONAL USE IN ANY
MANNER THAT COMPLIES WITH THE
MPEG-2 STANDARD FOR ENCODING
VIDEO INFORMATION FOR PACKAGED
MEDIA IS EXPRESSLY PROHIBITED
WITHOUT A LICENSE UNDER APPLICABLE
PATENTS IN THE MPEG-2 PATENT
PORTFOLIO, WHICH LICENSE IS
,” “Memory Stick
,”
Micro,” “MagicGate,” “
“MagicGate Memory Stick” and “MagicGate
Memory Stick Duo” are trademarks of Sony
Corporation.
AVAILABLE FROM MPEG LA, L.L.C., 250
STEELE STREET, SUITE 300, DENVER,
COLORADO 80206.
• “InfoLITHIUM” is a trademark of Sony
Corporation.
• “x.v.Colour” is a trademark of Sony
Corporation.
• i.LINK and are trademarks of Sony
Corporation.
•
•
is a trademark.
is a trademark.
• Microsoft, Windows, Windows Vista, and
Windows Media are trademarks or registered
trademarks of U.S. Microsoft Corporation in the
U.S. and other countries.
• Macintosh and Mac OS are registered
trademarks of Apple Inc. in the U.S. and other
countries.
• HDV and the HDV logo are trademarks of Sony
Corporation and Victor Company of Japan, Ltd.
• HDMI, HDMI logo, and High-Definition
Multimedia Interface are trademarks or
registered trademarks of HDMI Licensing LLC.
• Pentium is a trademark or registered trademark
of Intel Corporation.
• Adobe, and Adobe Reader are trademarks of
Adobe Systems Incorporated.
All other product names mentioned herein may be
the trademarks or registered trademarks of their
respective companies. Furthermore, ™ and “®”
are not mentioned in each case in this manual.
129
Download from Www.Somanuals.com. All Manuals Search And Download.
QIduicek Rnetfeirefnyceing parts and controls
The numbers in ( ) are reference pages.
A Accessory shoe mount (130)
plate and remove it from the accessory
shoe.
To mount the accessory shoe
Mount the accessory shoe on the accessory
shoe mount as illustrated.
2 Place the accessory shoe as its
protrusions matches recesses of the
accessory shoe mount, then fix it to the
mount with four screws.
Accessory shoe plate
3 Insert the accessory shoe plate in the
direction of the arrow on the plate
surface until the end of the plate
engages the end of the shoe.
Accessory shoe
Accessory shoe
To remove the accessory shoe
Remove the shoe plate in the same way as
step 1 of “To mount the accessory shoe.”
Loosen the 4 screws and remove the
accessory shoe from the accessory shoe
mount.
Accessory shoe plate
1 Lift the edge of the accessory shoe plate
and pull it in the direction opposite to
that of the arrow on the accessory shoe
130
Download from Www.Somanuals.com. All Manuals Search And Download.
To mount the accessory shoe adaptor
Mount the accessory shoe adaptor on the
accessory shoe mount as illustrated.
To remove the accessory shoe adaptor
Do the reverse procedure to mounting the
accessory shoe adaptor to remove it.
Continued ,
131
Download from Www.Somanuals.com. All Manuals Search And Download.
Identifying parts and controls (Continued)
9
0
67 8
qa
qs
1
2
3
qd
qf
4
5
ql qk qjqh qg
The recording lamp flashes if the
remaining tape or battery is low.
* The ASSIGN 2 button, ASSIGN 5 button/AE
SHIFT button and WHT BAL button have
raised tactile dots for your convenience in
locating the buttons.
G ASSIGN 5 button/AE SHIFT
H ASSIGN 6 button/REC REVIEW
Q
(one push) button (32)
Download from Www.Somanuals.com. All Manuals Search And Download.
132
Identifying parts and controls (Continued)
1 2 3 4
5
6
7
CHECK
STORE EXEC
A
B
8
9
SHOT TRANSITION/FOCUS MARKING
0
qa
qf
qd
qs
qk
qj qh qg
A Hook for shoulder strap (134)
To attach the shoulder strap
Attach the shoulder strap (optional) to the
hooks for the shoulder strap.
The recording lamp flashes if the
remaining tape or battery is low.
R SHOT TRANSITION/FOCUS
MARKING button (46)
134
Download from Www.Somanuals.com. All Manuals Search And Download.
7
0
qa
8
9
TC/U-BIT DATA CODE
qh qg qf qd qs
1 2 3
4
6
MANUAL
ZOOM
SERVO
5
J Video control buttons (STOP/REW/
PLAY/FF/PAUSE/REC/SLOW) (50)
P RESET button
H TC/U-BIT button
If you press the RESET button, all settings
including the clock setting (except the Picture
profile and Camera profile settings) return to
the default.
Switches between time code and user bit
to display on the LCD screen.
To attach the lens mount cap
To attach the rear lens cap
Attach the rear lens cap to the rear of the
lens.
Hold the lens mount
cap with the v mark
facing up. Attach the
lens mount cap to the
lens mount with the
center pin on the
To remove the rear lens cap
Hold the two protrusions
on the edge of the rear
lens cap as illustrated and
remove the cap from the
lens.
back of the cap
inserted in the recess
at the top center of
the lens mount.
To remove the
lens mount cap
Hold the protrusion at the center of the lens
mount cap and remove the cap from the
lens mount.
Continued ,
135
Download from Www.Somanuals.com. All Manuals Search And Download.
Identifying parts and controls (Continued)
b Notes
• Aim the Remote Commander towards the
remote sensor to operate your camcorder.
• Point the remote sensor away from strong light
sources such as direct sunlight or overhead
lighting. Otherwise, the Remote Commander
may not function properly.
Remote Commander
Remove the insulation sheet before using
the Remote Commander.
Insulation sheet
• When you are operating with the Remote
Commander supplied with your camcorder,
your VCR may also operate. In that case, select
a commander mode other than VTR 2 for your
VCR, or cover the sensor of your VCR with
black paper.
7
To change the battery of the Remote
Commander
1 While pressing on the tab, inset your
fingernail into the slit to pull out the battery
case.
8
9
1
2
3
4
2 Place a new battery with the + side facing
up.
5
6
3 Insert the battery case back into the Remote
Commander until it clicks.
0
Tab
The on-screen image when you press this
button will be recorded onto the “Memory
Stick Duo” as a still image.
WARNING
Battery may explode if mistreated. Do not
recharge, disassemble or dispose of in
fire.
B Memory control buttons (Index, –/+,
Memory/playback) (51)
• When the lithium battery becomes weak, the
operating distance of the Remote Commander
may shorten, or the Remote Commander may
not function properly. In this case, replace the
battery with a Sony CR2025 lithium battery.
Use of another battery may present a risk of fire
or explosion.
D . >
E Video control buttons (Rewind,
Playback, Fast-forward, Pause, Stop,
Slow) (50)
F ZERO SET MEMORY
This button is invalid with your
camcorder.
G Transmitter
136
Download from Www.Somanuals.com. All Manuals Search And Download.
Indicators for the LCD screen and viewfinder
The numbers in ( ) are reference pages.
The indicators will not be recorded on the tape during recording.
Recording movies
Recording still images
1
2
3
4
5
2
8
60
min
00:04:50:04
min
60
REC
1.2M
9
HDV1080i
12
min
101
7
6
A Recording format (
) (83)
or
,
B Remaining battery (approx.)
C Recording status ([STBY] (standby) or
[REC] (recording))
Data code during recording
D During recording:
Tape counter (hour: minute: second:
frame)
The date/time during recording and the
camera setting data will be recorded
automatically. They do not appear on the
screen during recording, but you can check
them on the screen by pressing the DATA
CODE button during playback (p. 53).
During playback:
Time code (hour: minute: second:
frame)
E Recording capacity of the tape (approx.)
Continued ,
137
Download from Www.Somanuals.com. All Manuals Search And Download.
Viewing movies
Viewing still images
2
qs qd
8
1
2
q;
4
5
101
60
min
1.2M
9/9
60
min
00:04:50:04
12
min
101-0011
MEMORY PLAY
qa
HDV1080i
qf
K Data file name
J Tape transport indicator
Recording mode (DVCAM or DV SP)
L Picture number/Total number of
recorded pictures in the current
playback folder
appears when a tape recorded in the DVCAM
or DV SP format is played back.
N Previous/Next folder icon
The
,
or
appears when the
first or last picture of the current folder is
displayed and when there are multiple folders
on the same “Memory Stick Duo.” You can
move to Previous/Next folder with the
VOLUME/MEMORY button.
138
Download from Www.Somanuals.com. All Manuals Search And Download.
Center
Indicators when you made
changes
Indicator
Meaning
Z
Upper left
Upper right
60min
00:00:00:00
Bottom
Indicator
Meaning
CAM LEVELING
(80)
Center
Bottom
Upper left
Manual volume
Indicator
Meaning
Recording format (83)
9
Manual focus (28)
Picture profile (33)
SteadyShot off (72)
~
ND filter (30)
.
D.EXTENDER (72)
Auto setting (81)
Extended clear scan
n
A
B
White balance (32)
REC TYPE
SCAN TYPE (84)
ZEBRA (79)
Upper right
Indicator
Meaning
INDEX MARK (44)
* The settings can be made only for the pictures
in the DVCAM (DV) format.
HDV input/
DV input (98)
** The setting can be made only for the pictures in
the HDV format.
HDV output/
DV output (97)
i.LINK connection
z Tips
• Indicators may look different or appear at
different positions.
LCD backlight off (18)
139
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Numeric
COLOR CORRCT (Color
A
Connect
B
BATT RELEASE (battery
D
Button-type lithium battery
C
Deleting camera profile settings
DIGITAL EXTENDER
AUDIO LEVEL (CH1)
Cassette
AUDIO LEVEL (CH1)
AUDIO LEVEL (CH2)
AUDIO LEVEL (CH2)
DV AU. MODE
AU.LVL DISP
140
Download from Www.Somanuals.com. All Manuals Search And Download.
DV REC MODE
G
E
H
F
Folder
J
K
L
I
PB FOLDER (Playback
REC FOLDER (Recording
Continued ,
141
Download from Www.Somanuals.com. All Manuals Search And Download.
Index (Continued)
Pre-installed rechargeable
Microphone fixing clamper
PUSH AUTO FOCUS button
PUSH (lens hood release)
M
Q
N
R
REC CH SELECT switch
O
REC FOLDER (Recording
Number of recordable
Memory Stick Duo slot cover
MEMORY/DELETE button
Menu
P
REC START/STOP button
PB FOLDER
PB ZOOM (Playback zoom)
MEMORY SET menu
PICTURE PROFILE button
142
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CTRL (Remote
Viewfinder lens adjustment
T
S
VOLUME/MEMORY button
W
SHOT TRANSITION/FOCUS
White balance memory switch
SHUTTER SPEED button
SKINTONE DTL (Skintone
U
X
SMTH SLW REC
Z
Using your camcorder abroad
V
Continued ,
143
Download from Www.Somanuals.com. All Manuals Search And Download.
Index (Continued)
144
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
|