Sony Camcorder TRV85 User Manual

3-861-891-13 (1)

Vid e o Ca m e ra

Re co rd e r

Operating Instructions

Before operating the unit, please read this manual thoroughly,

and retain it for future reference.

Owner’s Record

The model and serial numbers are located on the bottom. Record the

serial number in the space provided below. Refer to these numbers

whenever you call upon your Sony dealer regarding this product.

Model No. CCD-TRV

Model No. AC-L

Serial No.

CCD-TRV93

CCD-TRV75/TRV85/TRV93/

TRV715/TRV815

Download from Www.Somanuals.com. All Manuals Search And Download.

Ta b le o f co n t e n t s

Using the built-in light

Be fo re yo u b e g in

(CCD-TRV93 only) ......................... 52

Releasing the STEADY SHOT function

........................................................... 54

Using this manual ................................... 4

Checking supplied accessories .............. 5

– fo r p la yb a ck/e d it in g –

Ge t t in g st a rt e d

Watching on a TV screen ..................... 55

Editing onto another tape .................... 57

Recording from a VCR or TV .............. 58

Installing and charging the battery pack

............................................................. 6

Inserting a cassette ................................ 10

Ad d it io n a l in fo rm a t io n

Ba sic o p e ra t io n s

Changing the lithium battery in the

camcorder ........................................ 59

Camera recording ................................. 11

Using the zoom feature ................. 14

Resetting the date and time ................. 61

Simple setting of clock by time

Selecting the START/ STOP mode

.................................................... 15

difference ......................................... 62

Usable cassettes and playback modes

........................................................... 63

Tips for using the battery pack ........... 64

Shooting with the LCD screen ...... 16

Letting the subject monitor the shot

(Mirror mode) .......................... 17

Maintenance information and

Hints for better shooting ...................... 18

Checking the recorded picture ............ 20

Playing back a tape ............................... 21

Searching for the end of the picture ... 24

precautions ...................................... 67

Using your camcorder abroad ............ 72

Trouble check ........................................ 73

Self-diagnosis display .......................... 76

Specifications ......................................... 77

Identifying the parts ............................. 78

Warning indicators ............................... 86

Index ....................................................... 87

Ad va n ce d o p e ra t io n s

Using alternative power sources ........ 25

Using the house current ................ 25

Changing the mode settings ................ 28

– fo r ca m e ra re co rd in g –

Shooting with backlighting ................. 33

Using the FADER function .................. 34

Shooting in the dark (NightShot) ....... 36

Using the wide mode function ............ 37

Using the PROGRAM AE function .... 39

Focusing manually ................................ 41

Enjoying picture effect ......................... 43

Adjusting the exposure ........................ 45

Superimposing a title ........................... 47

Making your own titles ........................ 49

Recording with the date/ time ............ 50

Optimizing the recording condition .. 51

Download from Www.Somanuals.com. All Manuals Search And Download.

Be fo re yo u b e g in

Usin g t h is m a n u a l

The instructions in this manual are for the four models listed below. Before you start

reading this manual and operating the unit, check your model number by looking at the

bottom of your camcorder. The CCD-TRV93 is the model used for illustration

purposes. Otherwise, the model name is indicated in the illustrations. Any differences

in operation are clearly indicated in the text, for example, “CCD-TRV93 only.”

As you read through this manual, buttons and settings on the camcorder are shown in

capital letters.

e.g. Set the POWER switch to CAMERA.

You can hear the beep sound to confirm your operation.

Typ e s o f d iffe re n ce s

CCD-

TRV75/ TRV85/ TRV715/ TRV815

TRV93

color

Viewfinder

Video light

B/ W

—

No t e o n TV co lo r syst e m s

TV color systems differ from country to country. To view your recordings on a TV, you

need an NTSC system-based TV.

Pre ca u t io n o n co p yrig h t

Television programs, films, video tapes, and other materials may be copyrighted.

Unauthorized recording of such materials may be contrary to the provision of the

Pre ca u t io n s o n ca m co rd e r ca re

• The LCD screen and/or the color view finder are manufactured using high-

precision technology. How ever, there may be some tiny black points and/or

bright points (red, blue or green in color) that constantly appear on the LCD

screen and/or in the view finder. These points are normal in the manufacturing

process and do not affect the recorded picture in any w ay. Over 99.99% are

operational for effective use.

• Do not let the camcorder get wet. Keep the camcorder away from rain and sea water.

Letting the camcorder get wet may cause the unit to malfunction, and sometimes this

malfunction cannot be repaired [a ].

• Never leave the camcorder exposed to temperatures above 140°F (60°C), such as in a

car parked in the sun or under direct sunlight [b ].

[a]

[b]

Download from Www.Somanuals.com. All Manuals Search And Download.

Ch e ckin g su p p lie d a cce sso rie s

Check that the following accessories are supplied with your camcorder.

1 Wireless Remote Commander (1)

5 Size AA (R6) battery for Remote

(p. 83)

Commander (2) (p. 84)

6 A/V connecting cable (1) (p. 55)

7 Shoulder strap (1) (p. 84)

8 Battery case (1) (p. 26)

2 AC-L10A/L10B/L10C AC pow er

adaptor (1), Pow er cord (1) (p. 7, 25)

3 NP-F330 Battery pack (1) (p. 6, 25)

4 CR2025 Lithium Battery (1) (p. 59)

CCD-TRV75/ TRV85/ TRV93 only

The lithium battery is already installed

in your camcorder.

Contents of the recording cannot be compensated if recording or playback is not

made due to a malfunction of the camcorder, video tape, etc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Ge t t in g st a rt e d

Installing and charging the battery pack

Before using your camcorder, you first need to install and charge the battery pack.

This camcorder operates only with the “InfoLITHIUM” battery.

“InfoLITHIUM” is a trademark of Sony Corporation.

In st a llin g t h e b a t t e ry p a ck

(1) While pressing BATT RELEASE, slide the battery terminal cover in the

direction of the arrow.

(2) Install the battery pack in the direction of the $ mark on the battery pack. Slide

the battery pack down until it catches on the battery release lever and clicks.

Attach the battery pack to the camcorder securely.

BATT RELEASE

Note on the battery pack

Do not carry the camcorder by grasping the battery pack.

Download from Www.Somanuals.com. All Manuals Search And Download.

In st a llin g a n d ch a rg in g t h e b a t t e ry p a ck

Ch a rg in g t h e b a t t e ry p a ck

Charge the battery pack on a flat surface without vibration. The battery pack is charged

a little in the factory.

(1) Open the DC IN jack cover and connect the supplied AC power adaptor to the

DC IN jack with the plug’s 4 mark up.

(2) Connect the power cord to the AC power adaptor.

(3) Connect the power cord to a wall outlet.

(4) Slide the POWER switch to OFF. Remaining battery time is indicated by the

minutes on the display window. Charging begins.

When the remaining battery indicator becomes ı, normal charge is completed. For

full charge, which allows you to use the battery longer than usual, leave the battery

pack attached for about 1 hour after normal charge is completed until FULL appears in

the display window.

Before using the camcorder with the battery pack, unplug the AC power adaptor from

the DC IN jack of the camcorder. You can also use the battery pack before it is

completely charged.

POWER

CAMERA

OFF

VTR

Notes

• “– – – min” appears in the display window until the camcorder calculates remaining

battery time.

• Remaining battery time indication in the display window roughly indicates the

recording time with the viewfinder. Use it as a guide. It may differ from the actual

recording time.

Download from Www.Somanuals.com. All Manuals Search And Download.

In st a llin g a n d ch a rg in g t h e b a t t e ry p a ck

Ch a rg in g t im e

Battery

pack

NP-F330

(supplied)

NP-F730/ F730H/

F750

NP-F530/ F550

NP-F930/ F950

Charging

150

210

300

390

time* (min.)

(90)

(150)

(240)

(330)

The time required for a normal charge is indicated in parentheses.

* Approximate minutes to charge an empty battery pack using the supplied AC power

adaptor. (Lower temperatures require a longer charging time.)

Ba t t e ry life

Upper numbers are the time when recording with the viewfinder. Lower numbers are

the time when recording with the LCD screen. Using both will further reduce recording

time.

CCD-TRV75/TRV715

Battery

pack

NP-F330

(supplied)

NP-F730H

/ F750

NP-F530 NP-F550 NP-F730

NP-F930 NP-F950

Continuous

recording

time*

120 (105) 205 (180) 240 (210) 410 (370) 490 (440) 650 (585) 750 (675)

95 (85) 155 (140) 190 (170) 315 (285) 385 (345) 495 (450) 590 (530)

Typical

recording

time**

60 (55) 105 (95) 125 (110) 215 (195) 255 (230) 340 (310) 395 (355)

50 (45)

85 (75) 100 (90) 175 (155) 210 (185) 270 (245) 320 (290)

Playing

time on

LCD

95 (85) 155 (140) 190 (170) 315 (285) 385 (345) 495 (450) 590 (530)

CCD-TRV85/TRV815

Battery

pack

NP-F330

(supplied)

NP-F730H

/ F750

NP-F530 NP-F550 NP-F730

NP-F930 NP-F950

Continuous

recording

time*

120 (105) 205 (180) 240 (210) 410 (370) 490 (440) 650 (585) 750 (675)

90 (80) 145 (130) 175 (160) 300 (270) 365 (325) 475 (430) 555 (500)

Typical

recording

time**

60 (55) 105 (95) 125 (110) 215 (195) 255 (230) 340 (310) 395 (355)

45 (40)

75 (70)

95 (85) 165 (145) 200 (175) 260 (235) 305 (275)

Playing

time on

LCD

90 (80) 145 (130) 175 (160) 300 (270) 365 (325) 475 (430) 555 (500)

Download from Www.Somanuals.com. All Manuals Search And Download.

In st a llin g a n d ch a rg in g t h e b a t t e ry p a ck

CCD-TRV93

Battery

pack

NP-F330

(supplied)

NP-F730H

/ F750

NP-F530 NP-F550 NP-F730

NP-F930 NP-F950

Continuous

recording

time*

125 (110) 215 (190) 250 (220) 430 (385) 510 (460) 680 (610) 780 (700)

95 (85) 155 (140) 190 (170) 315 (285) 385 (345) 495 (450) 590 (530)

Typical

recording

time**

65 (55) 110 (100) 130 (115) 225 (200) 270 (240) 360 (320) 410 (370)

50 (45)

85 (75) 100 (90) 170 (155) 210 (185) 270 (245) 320 (290)

Playing

time on

LCD

95 (85) 155 (140) 190 (170) 315 (285) 385 (345) 495 (450) 590 (530)

Numbers in parentheses indicate the time when you use a normally charged battery.

Battery life will be shorter if you use the camcorder in a cold environment.

Approximate continuous recording time at 77°F (25°C).

** Approximate minutes when recording while you repeat recording start/ stop,

zooming and turning the power on/ off. The actual battery life may be shorter.

Notes on remaining battery time indication during recording

• Remaining battery time is displayed in the viewfinder or on the LCD screen.

However, the indication may not be displayed properly, depending on using

conditions and circumstances.

• When you close the LCD panel and open it again, it takes about 1 minute for the

correct remaining time to be displayed.

To re m o ve t h e b a t t e ry p a ck

While pressing BATT RELEASE, slide the battery pack in the direction of the arrow.

BATT RELEASE

You can look at the demonstration of the functions available with this camcorder (p. 31).

Download from Www.Somanuals.com. All Manuals Search And Download.

In se rt in g a ca sse t t e

Make sure that the power source is installed. When you want to record in the Hi8

system, use Hi8 video cassette H.

(1) While pressing the small blue button on the EJECT switch, slide it in the

direction of the arrow. The cassette compartment automatically lifts up and

opens.

(2) Insert a cassette with the window facing out.

(3) Close the cassette compartment by pressing the “PUSH” mark on the cassette

compartment. The cassette compartment automatically goes down.

PUSH

To e je ct t h e ca sse t t e

While pressing the small blue button on the EJECT switch, slide it in the direction of the

arrow.

To p re ve n t a ccid e n t a l e ra su re

Slide the tab on the cassette to expose the red mark. If you insert the cassette with the

red mark exposed and close the cassette compartment, the beeps sound for a while. If

you try to record with the red mark exposed, the

cannot record.

and 6 indicators flash, and you

To re-record on this tape, slide the tab back out covering the red mark.

Download from Www.Somanuals.com. All Manuals Search And Download.

Ba sic o p e ra t io n s

Ca m e ra re co rd in g

Make sure that the power source is installed and a cassette is inserted and that the

START/ STOP MODE switch inside the LCD panel is set to

. Before you record one-

time events, you may want to make a trial recording to make sure that the camcorder is

working correctly.

When you use the camcorder for the first time, power on it and reset the date and time

to your time before you start recording (p. 61). The date is automatically recorded for 10

seconds after you start recording (AUTO DATE feature). This feature works only once

a day.

(1) While pressing the small green button on the POWER switch, set it to

CAMERA.

(2) Turn STANDBY up to STANDBY.

(3) Press START/ STOP. The camcorder starts recording. The “REC” indicator

appears. The red lamp lights up in the viewfinder (CCD-TRV75/ TRV85/

TRV715/ TRV815 only). The camera recording/ battery lamp located on the

front of the camcorder also lights up.

POWER

CAMERA

OFF

STBY 0:00:00

AUTO DATE

40min

VTR

START/STOP

REC 0:00:01

40min

JUL 4 1998

START/STOP

Download from Www.Somanuals.com. All Manuals Search And Download.

Ca m e ra re co rd in g

To st o p re co rd in g m o m e n t a rily [a ]

Press START/ STOP again. The “STBY” indicator appears in the viewfinder (Standby

mode).

To fin ish re co rd in g [b ]

Press START/ STOP again. Turn STANDBY down to LOCK and set the POWER switch

to OFF. Then, eject the cassette.

[a]

[b]

STBY 0:35:20

START/STOP

Note

There is a little wear on the battery pack which is installed with the camcorder.

However, for getting remaining battery time indicated correctly, leave the battery pack

installed after use.

As an exception, be sure to remove the battery pack from the model having the built-in

light after use (CCD-TRV93 only).

To fo cu s t h e vie w fin d e r le n s

If you cannot see the indicators in the viewfinder clearly, or after someone else has used

the camcorder, focus the viewfinder lens. Turn the viewfinder lens adjustment ring [a]

(CCD-TRV75/ TRV85/ TRV715/ TRV815) or move the viewfinder lens adjustment lever

[b] (CCD-TRV93) so that the indicators in the viewfinder come into sharp focus.

[a ] CCD-TRV75/TRV85/TRV715/

TRV815

[b ] CCD-TRV93

Note on the lighting aperture

– CCD-TRV93 only

If direct sunlight enters the lighting aperture, the picture in the viewfinder appears

brighter. When this happens, colors in the viewfinder may change.

Download from Www.Somanuals.com. All Manuals Search And Download.

Ca m e ra re co rd in g

Note on Standby mode

If you leave the camcorder in Standby mode for 5 minutes while the cassette is inserted,

the camcorder turns off automatically for saving battery power as well as for preventing

the battery and tape from wearing down. To resume Standby mode, turn STANDBY

down and up again. To start recording, press START/ STOP.

Note on recording

When you record from the beginning of a tape, run the tape for about 15 seconds before

starting the actual recording. This will ensure that you won’t miss any start-up scenes

when you play back the tape.

Notes on the tape counter

• The tape counter indicates the recording or playback time. Use it as a guide. There

will be a time lag of several seconds from the actual time. To set the counter to zero,

press COUNTER RESET.

• If the tape is recorded in SP and LP modes mixed, the tape counter shows incorrect

recording time. When you intend to edit the tape using the tape counter as a guide,

record in same (SP or LP) mode.

Note on the beep sound

The beep sounds when you operate the camcorder. Several beeps also sound as a

warning of any unusual condition of the camcorder.

Note that the beep sound is not recorded on the tape. If you do not want to hear the

beep sound, select “OFF” in the menu system.

Note on the AUTO DATE feature

The clock is set to East Coast Standard Time at the factory. You can reset the clock in the

menu system. You can change the AUTO DATE settings by selecting ON or OFF in the

menu system. The AUTO DATE feature shows the date automatically once a day.

However, the date may automatically appear more than once a day when:

– you reset the date and time.

– you eject and insert the tape again.

– you stop recording within 10 seconds.

– you set AUTO DATE to OFF once and set it to ON again in the menu system.

Download from Www.Somanuals.com. All Manuals Search And Download.

Ca m e ra re co rd in g

Usin g t h e zo o m fe a t u re

Zooming is a recording technique that lets you change the size of the subject in the

scene.

For more professional-looking recordings, use the zoom function sparingly.

“T” side: for telephoto (subject appears closer)

“W” side: for wide-angle (subject appears farther away)

Zo o m in g sp e e d (Va ria b le sp e e d zo o m in g )

Move the power zoom lever a little for a slower zoom, move it further for a faster zoom.

When you shoot a subject using a telephoto zoom

If you cannot get a sharp focus while in extreme telephoto zoom, move the power zoom

lever to the “W” side until the focus is sharp. You can shoot a subject that is at least

about 2 5/ 8 feet (about 80 cm) away from the lens surface in the telephoto position, or

about 1/ 2 inch (about 1 cm) away in the wide-angle position.

Notes on digital zoom

• More than 18x zoom is performed digitally, and the picture quality deteriorates as you

go toward the “T” side. If you do not want to use the digital zoom, set the D ZOOM

function to OFF in the menu system.

• The right side [a ] of the power zoom indicator shows the digital zooming zone, and

the left side [b ] shows the optical zooming zone. If you set the D ZOOM function to

OFF, the [a ] zone disappears.

[b] [a]

Download from Www.Somanuals.com. All Manuals Search And Download.

Ca m e ra re co rd in g

Se le ct in g t h e START/STOP m o d e

Your camcorder has three modes. These modes enable you to take a series of quick

shots resulting in a lively video.

(1) While pressing OPEN, open the LCD panel.

(2) Set START/ STOP MODE to the desired mode.

: Recording starts when you press START/ STOP, and stops when you

press it again (normal mode).

ANTI GROUND SHOOTING

: The camcorder records only while you

press down START/ STOP so that you can avoid recording unnecessary scenes.

5SEC: When you press START/ STOP, the camcorder records for 5 seconds and

then stops automatically.

(3) Turn STANDBY up to STANDBY and press START/ STOP. Recording starts.

If you selected 5SEC, the tape counter disappears and five dots appear. The dots

disappear at a rate of one per second as illustrated below.

START/STOP

MODE

5SEC

ANTI

GROUND

SHOOTING

START/STOP

REC

STBY

•••••

•

•••••

To e xt e n d t h e re co rd in g t im e in 5SEC m o d e

Press START/ STOP again before all the dots disappear. Recording continues for about

5 seconds from the moment you press START/ STOP.

Notes on START/STOP mode

• If you have turned off the indicators on the LCD screen, the dots do not appear.

• You cannot use FADER in 5SEC or

mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Ca m e ra re co rd in g

Sh o o t in g w it h t h e LCD scre e n

You can also record the picture while looking at the LCD screen.

When using the LCD screen, the viewfinder turns off automatically. You cannot

monitor the sound from the speaker during recording.

(1) While pressing OPEN, open the LCD panel.

(2) Adjust the angle of the LCD panel.

The LCD panel moves about 90 degrees to this side and about 210 degrees to

the other side.

To adjust the brightness of the LCD screen, press LCD BRIGHT.

+ side: to brighten the LCD screen

– side: to dim the LCD screen

The battery life is longer when the LCD panel is closed. Use the viewfinder instead of

the LCD screen to save the battery power.

90°

210°

LCD

BRIGHT

90°

Ba cklig h t in g t h e LCD scre e n

If the LCD screen is insufficiently illuminated even after adjusting LCD BRIGHT, select

LCD B. L. in the menu system and set to BRIGHT. You can select LCD B. L. only while

using the battery pack as a power source.

Download from Www.Somanuals.com. All Manuals Search And Download.

Ca m e ra re co rd in g

Notes on the LCD panel

• When closing the LCD panel, turn it vertically until it clicks [a ].

• When turning the LCD panel, turn it always vertically; otherwise, the camcorder body

may be damaged or the LCD panel may not close properly [b ].

• Close the LCD panel completely when not in use.

[a]

[b]

Le t t in g t h e su b je ct m o n it o r t h e sh o t (Mirro r m o d e )

You can turn the LCD panel over so that it faces the other way and you can let the

subject monitor the shot while shooting with the viewfinder.

Turn the LCD panel vertically first until it clicks, then turn it over. The

appears on the LCD screen (Mirror mode) and the date and remaining tape indicators

disappear.

indicator

To ca n ce l m irro r m o d e

Turn the LCD panel back toward the viewfinder.

Notes on mirror mode

• The picture on the LCD looks as a mirror-image while recording in mirror mode. The

STBY indicator appears as Pr and REC as r. The other indicators may not appear in

mirror mode.

• While recording in mirror mode, you cannot operate the following buttons: TITLE,

DATE, TIME and MENU.

• The date appears in reverse when the AUTO DATE feature is turned on. When

recorded, it will be normal.

Download from Www.Somanuals.com. All Manuals Search And Download.

Hin t s fo r b e t t e r sh o o t in g

For hand-held shots, you’ll get better results by holding the camcorder according to the

following suggestions:

• Hold the camcorder firmly and secure it with the grip strap so that you can easily

manipulate the controls with your thumb.

• Place your right elbow against your side.

• Place your left hand under the camcorder to support it. Be sure to not touch the built-

in microphone.

• Place your eye firmly against the viewfinder eyecup.

• Use the viewfinder frame as a guide to determine the horizontal plane.

• You can also record in a low position to get an interesting angle. Lift the viewfinder

up for recording from a low position [a ].

• You can also record in a low position or even in a high position using the LCD panel

[b ].

• When you use the LCD screen outdoors in direct sunlight, the LCD screen may be

difficult to see. If this happens, we recommend that you use the viewfinder.

[b]

[a]

Download from Www.Somanuals.com. All Manuals Search And Download.

Hin t s fo r b e t t e r sh o o t in g

Place the camcorder on a flat surface or use a tripod

Try placing the camcorder on a table top or any other flat surface of suitable height. If

you have a tripod for a still camera, you can also use it with the camcorder.

When attaching a non-Sony tripod, make sure that the length of the tripod screw is less

than 9/ 32 inch (6.5 mm). Otherwise, you cannot attach the tripod securely and the

screw may damage the camcorder.

Cautions on the view finder and the LCD

• Do not pick up the camcorder by the viewfinder or by the LCD panel [c].

• Do not place the camcorder so as to point the viewfinder or the LCD screen toward

the sun. The inside of the viewfinder may be damaged. Be careful when placing the

camcorder under sunlight or by a window [d ].

[c]

[d ]

Download from Www.Somanuals.com. All Manuals Search And Download.

Ch e ckin g t h e re co rd e d p ict u re

Using EDITSEARCH, you can review the last recorded scene or check the recorded

picture in the viewfinder or on the LCD screen.

(1) While pressing the small green button on the POWER switch, set it to

CAMERA.

(2) Turn STANDBY up to STANDBY.

(3) Press the – (Œ) side of EDITSEARCH momentarily; the last few seconds of the

recorded portion play back (Rec Review ).

You can monitor the sound from the speaker or headphones.

Hold down the – side of EDITSEARCH until the camcorder goes back to the

scene you want. The last recorded portion is played back. To go forward, hold

down the + side (Edit Search).

POWER

CAMERA

OFF

VTR

START/STOP

EDITSEARCH

To st o p p la yb a ck

Release EDITSEARCH.

To g o b a ck t o t h e la st re co rd e d p o in t a ft e r e d it se a rch

Press END SEARCH. The last recorded point is played back for about 5 seconds (10

seconds in LP mode) and stops. Note that this function does not work once you eject

the cassette after you recorded on the tape.

To b e g in re -re co rd in g

Press START/ STOP. Re-recording begins from the point you released EDITSEARCH.

Provided you do not eject the cassette, the transition between the last scene you

recorded and the next scene you record will be smooth.

Download from Www.Somanuals.com. All Manuals Search And Download.

Pla yin g b a ck a t a p e

You can monitor the playback picture on the LCD screen.

(1) While pressing the small green button on the POWER switch, set it to VTR.

The video control buttons light up.

(2) Insert the recorded tape with the window facing out.

(3) While pressing OPEN, open the LCD panel. Adjust the angle of the LCD panel

or the brightness of the LCD screen if necessary.

(4) Press 0 to rewind the tape.

(5) Press ( to start playback.

(6) Adjust the volume using VOLUME and adjust the brightness of the LCD

screen using LCD BRIGHT.

You can also monitor the picture on a TV screen, after connecting the camcorder to a TV

or VCR.

POWER

CAMERA

OFF

REW

VTR

PLAY

To stop playback, press p.

To rew ind the tape, press 0.

To fast-forw ard the tape rapidly, press ).

Download from Www.Somanuals.com. All Manuals Search And Download.

Pla yin g b a ck a t a p e

Wh e n m o n it o rin g o n t h e LCD scre e n

You can turn the LCD panel over and move back to the camcorder with the LCD screen

facing out [a ]. You can adjust the angle of the LCD screen by turning the LCD screen

up to 15 degrees [b ].

[a ]

[b ]

15°

Usin g t h e re m o t e co m m a n d e r

You can control playback using the supplied Remote Commander. Before using the

Remote Commander, insert the size AA (R6) batteries.

Note on DISPLAY button

Press DISPLAY to display the screen indicators on the LCD screen. To erase the

indicators, press DISPLAY again. If the POWER switch is set to CAMERA, you can

erase the indicator by pressing DISPLAY.

Using headphones

Connect headphones (not supplied) to the 2 jack. You can adjust the volume using

VOLUME. When you use headphones, the speaker on the camcorder is silent.

To view the playback picture in the view finder

Close the LCD panel. The viewfinder turns on automatically. When using the

viewfinder, you can monitor sound only by using headphones.

To view on the LCD screen again, open the LCD panel. The viewfinder turns off

automatically.

Note on the lens cover

The lens cover does not open when the POWER switch is set to VTR. Do not open the

lens cover manually. It may cause malfunction.

Download from Www.Somanuals.com. All Manuals Search And Download.

Pla yin g b a ck a t a p e

Va rio u s p la yb a ck m o d e s

You can enjoy clear pictures on the LCD screen during still, slow and picture search.

(Crystal-clear still/slow /picture search)

To vie w a st ill p ict u re (p la yb a ck p a u se )

Press P during playback. To resume playback, press P or (.

To lo ca t e a sce n e (p ict u re se a rch )

Keep pressing 0 or ) during playback. To resume normal playback, release the

button.

To m o n it o r t h e h ig h -sp e e d p ict u re w h ile a d va n cin g t h e t a p e o r

re w in d in g (skip sca n )

Keep pressing 0 while rewinding or ) while advancing the tape. To resume

normal playback, press (.

To vie w t h e p ict u re a t 1/5 sp e e d (slo w p la yb a ck)

Press & on the Remote Commander during playback. To resume normal playback,

press (. If slow playback lasts for about 1 minute, it shifts to normal speed

automatically.

To se le ct t h e p la yb a ck so u n d

Change the “HiFi SOUND” mode setting in the menu system.

Notes on playback

• Noise may appear when you use the crystal-clear still/ slow/ picture serch function to

play back the tape recorded in LP mode.

• Streaks appear and the sound is muted in the various playback modes.

• When playback pause mode lasts for 5 minutes, the camcorder automatically enters

stop mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Se a rch in g fo r t h e e n d o f t h e p ict u re

You can go to the end of the recorded portion after you record and play back the tape to

make the transition between the last scene you recorded and the next scene smooth.

The tape starts rewinding or fast-forwarding and the last 5 seconds (10 seconds in LP

mode) of the recorded portion play back. Then the tape stops at the end of the recorded

picture (End Search).

Note that the End Search function does not work once you eject the cassette after you

have recorded on the tape.

(1) While pressing OPEN, open the LCD panel.

(2) Press END SEARCH.

This function works when the POWER switch is set to either CAMERA or VTR.

END

If you start recording after using END SEARCH

Occasionally, the transition between the last scene you recorded and the next scene may

not be smooth.

Download from Www.Somanuals.com. All Manuals Search And Download.

Ad va n ce d o p e ra t io n s

Usin g a lt e rn a t ive p o w e r so u rce s

You can choose any of the following power sources for your camcorder: battery pack,

house current, alkaline batteries (CCD-TRV75/ TRV85/ TRV93 only) and 12/ 24 V car

battery. Choose the appropriate power source depending on where you want to use

your camcorder.

Place

Pow er source

House current

Battery pack

Accessory to be used

Indoors

Outdoors

Supplied AC power adaptor

Battery pack NP-F330 (supplied), NP-F530,

NP-F550, NP-F730, NP-F730H,

NP-F750, NP-F930, NP-F950

Size AA (LR6)

Alkaline battery

Supplied battery case (CCD-TRV75/ TRV85/

TRV93 only)

In the car

12 V or 24 V car battery

Sony car battery charger DC-V515A

Notes on pow er sources

• Disconnecting the power source or removing the battery pack during recording or

playback may damage the inserted tape.

• The DC IN jack has power source priority. This means that the battery pack cannot

supply any power if the power cord is connected to the DC IN jack, even when the

power cord is not plugged into a wall outlet.

Usin g t h e h o u se cu rre n t

(1) Open the DC IN jack cover, and connect the AC power adaptor to the DC IN

jack on the camcorder.

(2) Connect the power cord to the AC power adaptor.

(3) Connect the power cord to a wall outlet.

2, 3

WARNING

The power cord must only be changed at a qualified service shop.

PRECAUTION

The set is not disconnected from the AC power source (house current) as long as it is

connected to the wall outlet, even if the set itself has been turned off.

Note

Keep the AC power adaptor away from the camcorder if the picture is disturbed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Usin g a lt e rn a t ive p o w e r so u rce s

Usin g a lka lin e b a t t e rie s

– CCD-TRV75/TRV85/TRV93 o n ly

Use the battery case (supplied) and six size AA (LR6) Sony Alkaline batteries (not

supplied).

(1) Remove the battery holder from the battery case.

(2) Insert six new alkaline batteries into the battery holder, following the marking

on the holder to be sure the batteries are installed in the correct direction.

(3) Insert the battery holder with the alkaline batteries.

(4) Insert the battery case with the alkaline batteries to the battery mounting

surface of the camcorder in the same way as the battery pack.

Ba t t e ry life

Using alkaline batteries at 77°F (25°C).

Upper numbers are the time when recording with the viewfinder. Lower numbers are

the time when recording with the LCD screen.

CCD-

TRV75

TRV85

TRV93

265 min.

180 min.

265 min.

170 min.

285 min.

180 min.

Continuous recording time

140 min.

95 min.

140 min.

90 min.

150 min.

95 min.

Typical recording time

PRECAUTION

When the battery case is installed with the camcorder, do not connect the AC power

adaptor to the camcorder.

Notes

• You may not use the battery case in cold environment.

• The battery life may be shorter depending on the using environment.

• The above battery lives are estimates. The battery life may be shorter depending on

the storage condition of the battery before being purchased and temperature.

To remove the battery case

The battery case is removed in the same way as the battery pack.

When you replace the batteries, be sure to remove the battery case from the camcorder

to prevent malfunction.

Remove the battery case after using it.

Download from Www.Somanuals.com. All Manuals Search And Download.

Usin g a lt e rn a t ive p o w e r so u rce s

Usin g a ca r b a t t e ry

Use Sony DC-V515A car battery charger (not supplied). Connect the car battery cord to

the cigarette lighter socket of a car (12 V or 24 V).

Refer to the operating instructions of your car battery charger.

To remove the car battery charger

The car battery charger is removed in the same way as the battery pack.

This mark indicates that this product is a genuine accessory for Sony

video products.

When purchasing Sony video products, Sony recommends that you

purchase accessories with this “GENUINE VIDEO ACCESSORIES” mark.

Download from Www.Somanuals.com. All Manuals Search And Download.

Ch a n g in g t h e m o d e se t t in g s

You can change the mode settings in the menu system to further enjoy the features and

functions of the camcorder.

(1) Press MENU to display the menu.

(2) Turn the control dial to select the desired icon in the left side of the menu, then

press the dial.

(3) Turn the control dial to select the desired item, then press the dial.

(4) Turn the control dial to select the desired mode, and press the dial. If you want

to change the other modes, repeat steps 3 and 4. If you want to change the

other items, select

RETURN and press the dial, then repeat steps from 2 to

(5) Press MENU or select

icon to erase the menu display.

CAMERA SET

ZOOM

CAMERA

VTR

16 : 9WIDE

OTHERS

WORLD TIME

BEEP

COMMANDER

DISPLAY

REC LAMP

INDICATOR

CAMERA SET

ZOOM

16 : 9WIDE

STEADYSHOT

N. S. LIGHT

WIND

VTR SET

H i F i SOUND

EDIT

TBC

DNR

[MENU] : END

OTHERS

WORLD TIME

BEEP

COMMANDER

DISPLAY

REC LAMP

INDICATOR

OTHERS

WORLD TIME

BEEP

OTHERS

WORLD TIME

BEEP

COMMANDER ON

DISPLAY

REC LAMP

INDICATOR

RETURN

OTHERS

WORLD TIME

BEEP

COMMANDER ON

DISPLAY

OFF

REC LAMP

INDICATOR

OTHERS

WORLD TIME

BEEP

COMMANDER ON

DISPLAY

REC LAMP

INDICATOR

RETURN

OFF

OTHERS

WORLD TIME

BEEP

COMMANDER OFF

DISPLAY

REC LAMP

INDICATOR

RETURN

Note on the menu display

Depending on the model of your camcorder, the menu display may be different from

that in this illustration.

Download from Www.Somanuals.com. All Manuals Search And Download.

Ch a n g in g t h e m o d e se t t in g s

Notes on changing the mode setting

• Menu items differ depending on the setting of the POWER switch to VTR or

CAMERA.

• When you let the subject monitor the shot (mirror mode), the menu display does not

appear.

Se le ct in g t h e m o d e se t t in g o f e a ch it e m

It e m s fo r b o t h CAMERA a n d VTR m o d e s

LCD B. L.* <BRT NORMAL/BRIGHT>

• Normally select BRT NORMAL.

• Select BRIGHT when the LCD screen is dark.

When you select BRIGHT, battery life is about 10 percent shorter during recording.

When you use the power sources other than the battery pack, BRIGHT is automatically

selected, and LCD B.L. is not displayed in the menu.

LCD COLOR*

Select this item to adjust the color on the LCD screen.

REC MODE* <SP/LP>

• Select SP when recording in SP (standard play) mode.

• Select LP when recording in LP (long play) mode.

When a tape recorded on this camcorder in LP mode is played back on other types of

8mm camcorders or VCRs, the playback quality may not be as good as that on this

camcorder.

Ò REMAIN* <AUTO/ON>

• Select AUTO when you want to display the remaining tape bar

• for about 8 seconds after the camcorder is turned on and calculates the remainder

of the tape.

• for about 8 seconds after a cassette is inserted and the camcorder calculates the

remainder of the tape.

• for about 8 seconds after ( is pressed in VTR mode.

• for about 8 seconds after DISPLAY is pressed to display the screen indicators.

• for the period of tape rewinding, forwarding or picture search in VTR mode.

• Select ON to always display the remaining tape indicator.

Download from Www.Somanuals.com. All Manuals Search And Download.

Ch a n g in g t h e m o d e se t t in g s

AUTO TV ON* <ON/OFF>

You can use this feature only with Sony TVs.

• Select ON to turn on the TV automatically when using the LASER LINK function.

• Select OFF not to turn on the TV.

TV INPUT* <VIDEO1/VIDEO2/VIDEO3/OFF>

Select 1 or 2 or 3 of the video input on the TV which the IR receiver (not supplied) is

connected to when using the LASER LINK function.

LTR SIZE* <NORMAL/2x>

• Normally select NORMAL.

• Select 2x to display selected menu item by twice size of normal.

BEEP* <ON/OFF>

• Select ON so that beeps sound when you start/ stop recording, etc.

• Select OFF when you do not want to hear the beep sound.

COMMANDER <ON/OFF>

• Select ON when using the supplied Remote Commander for the camcorder.

• Select OFF when not using the Remote Commander.

DISPLAY* <LCD or V-OUT/LCD>

• Normally select LCD. The display appears on the LCD screen.

• Select V-OUT/ LCD to show the display both on the TV screen and LCD screen.

INDICATOR* <BL ON/BL OFF>

• Select BL ON to light up the display window.

• Select BL OFF to turn off the back light of display window.

When you use the AC power adaptor as a power source, this item is not displayed in

the menu.

Download from Www.Somanuals.com. All Manuals Search And Download.

Ch a n g in g t h e m o d e se t t in g s

It e m s fo r CAMERA m o d e o n ly

D ZOOM* <ON/OFF>

• Select ON to activate digital zooming.

• Select OFF to not use the digital zoom. The camcorder goes back to 18x zoom.

16:9WIDE* <OFF/CINEMA/16:9FULL>

• Normally select OFF.

• Select CINEMA to record in CINEMA mode.

• Select 16:9FULL to record in 16:9FULL mode.

STEADYSHOT* <ON/OFF>

• Normally select ON.

• Select OFF to release the Steady Shot function.

N.S.LIGHT* <ON/OFF>

• Normally select ON.

• Select OFF to not use the NightShot Light function.

WIND <ON/OFF>

• Select ON to reduce wind noise when recording in strong wind.

• Normally select OFF.

ORC TO SET*

Select this item to automatically adjust the recording condition to get the best possible

recording.

If you have already performed this function, “ORC ON” is displayed.

CLOCK SET*

Reset the date or time.

AUTO DATE* <ON/OFF>

• Select ON to record the date for 10 seconds after recording has started.

• Select OFF to not record the date.

DEMO MODE* <ON/OFF>

• Select ON to make the demonstration appear.

• Select OFF to deactivate the demonstration mode.

Notes on DEMO MODE

• DEMO MODE is set to STBY (Standby) at the factory and the demonstration starts

about 10 minutes after you set the POWER switch to CAMERA without inserting a

cassette.

Note that you cannot select STBY of DEMO MODE in the menu system.

• You cannot select DEMO MODE when a cassette is inserted in the camcorder.

• If you insert a cassette during the demonstration, the demonstration stops. You can

start recording as usual. DEMO MODE automatically returns to STBY.

• When NIGHTSHOT is set to ON, “NIGHTSHOT” appears in the viewfinder or on

the LCD screen and you cannot select DEMO MODE.

To look at the demonstration at once

Eject the cassette, if inserted. Select ON of DEMO MODE and erase the menu

display. The demonstration will begin.

When you turn off the camcorder once, DEMO MODE automatically returns to

STBY.

Download from Www.Somanuals.com. All Manuals Search And Download.

Ch a n g in g t h e m o d e se t t in g s

WORLD TIME*

Select this item to set the clock by a time difference.

REC LAMP* <ON/OFF>

• Select OFF when you do not want the camera recording/ battery lamp at the front of

the unit to light up.

• Normally select ON.

It e m s fo r VTR m o d e o n ly

HiFi SOUND <STEREO/1/2>

• Normally select STEREO.

• Select 1 or 2 to play back a dual sound track tape.

EDIT <ON/OFF>

• Select ON to minimize picture deterioration when editing.

• Normally select OFF.

TBC* <ON/OFF>

• Normally select ON, to correct for jitter.

• Select OFF to not correct for jitter. The picture may not be steady when played back.

Note on TBC setting

Set TBC to OFF when:

• Playing back a tape you have dubbed over.

• Playing back a tape on which you recorded the signal of a TV game or similar

machine.

• The playback picture fluctuates.

DNR* <ON/OFF>

• Normally select ON to reduce picture noise.

• Select OFF if the picture has a lot of movement, causing a conspicuous afterimage.

The follow ing settings w ork only during playback

EDIT, HiFi SOUND, TBC, and DNR.

* These settings are retained even when the battery is removed, as long as the lithium

battery is in place.

Download from Www.Somanuals.com. All Manuals Search And Download.

Sh o o t in g w it h b a cklig h t in g

When you shoot a subject with the light source behind the subject or a subject with a

light background, use the BACK LIGHT function.

Press BACK LIGHT. The c indicator appears in the viewfinder or on the LCD screen.

[a]

[b]

BACK LIGHT

[a ] Subject is too dark because of backlight.

[b ] Subject becomes bright with backlight compensation.

Aft e r sh o o t in g

Be sure to release this adjustment condition by pressing BACK LIGHT again. The c

indicator disappears. Otherwise, the picture will be too bright under normal lighting

condition.

This function is also effective under the follow ing conditions:

• A subject with a light source nearby or a mirror reflecting light

• A white subject against a white background. Especially when you shoot a person

wearing shiny clothes made of silk or synthetic fiber, his or her face tends to become

dark if you do not use this function.

To m a ke a fin e a d ju st m e n t

You can adjust the exposure manually. However, when you adjust the exposure

manually, BACK LIGHT does not operate.

Download from Www.Somanuals.com. All Manuals Search And Download.

Usin g t h e FADER fu n ct io n

Se le ct in g t h e fa d e r fu n ct io n

You can fade in or out to give your recording a professional appearance.

When the picture fades in, the sound gradually increases.When the picture fades out,

the sound gradually decreases.

[a ]

STBY

REC

FADER

M.FADER

(mosaic)

STRIPE

BOUNCE

(FADE IN only)

[b ]

STBY

REC

MONOTONE

When fading in, the picture gradually changes from black and white to color.

When fading out, the picture gradually changes from color to black and white.

Download from Www.Somanuals.com. All Manuals Search And Download.

Usin g t h e FADER fu n ct io n

Usin g t h e fa d e r fu n ct io n

Wh e n fa d in g in [a ]

(1) While the camcorder is in Standby mode, press FADER until the desired fade

indicator flashes.

(2) Press START/ STOP to start recording. The fade indicator stops flashing.

Wh e n fa d in g o u t [b ]

(1) During recording, press FADER until the desired fade indicator flashes.

(2) Press START/ STOP to stop recording. The fade indicator stops flashing, and

then recording stops.

The fading mode selected last is indicated first of all.

FADER

M.FADER

STRIPE

BOUNCE

MONOTONE

START/STOP

Note on the bounce function

When you use the following functions or D ZOOM is set to ON in the menu system,

“BOUNCE” indicator does not appear.

– Wide mode

– Functions using the PICTURE EFFECT button

– Functions using the PROGRAM AE button

To ca n ce l t h e fa d e r fu n ct io n

Before pressing START/ STOP, press FADER until the indicator disappears.

When the date or time indicator or title is displayed

The date or time indicator and title do not fade in or fade out.

When the START/STOP MODE sw itch is set to 5SEC or

You cannot use the fader function.

Note on the fader function

While using the bounce function, you cannot use the following functions.

– Exposure

– Focus

– Zoom

Download from Www.Somanuals.com. All Manuals Search And Download.

Sh o o t in g in t h e d a rk (Nig h t Sh o t )

The NightShot function enables you to shoot a subject in a dark place. You can achieve

a satisfactory recording of the ecology of nocturnal animals for observation with this

function.

This function may record picture nearly in monochrome.

(1) While the camcorder is in Standby mode, slide NIGHTSHOT to ON.

(2) Press START/ STOP to start recording.

and “NIGHTSHOT” indicators flash.

NightShot Light emitter

To ca n ce l t h e Nig h t Sh o t fu n ct io n

Slide NIGHTSHOT to OFF.

Usin g t h e Nig h t Sh o t Lig h t

When you set N.S.LIGHT to ON in the menu system, the picture will be more clear.

NightShot Light rays are infrared and are therefore invisible. The maximum limit of

NightShot Light is about 10 feet (about 3 merters).

Notes on the NightShot

• When you keep setting NIGHTSHOT to ON in normal recording, picture may be

recorded in incorrect/ unnatural color.

• You cannot use the built-in light and NIGHTSHOT function simultaneously. When

you want to use either of them, turn off the other. (CCD-TRV93 only)

• If focusing is difficult with the autofocus mode when using the NightShot function,

focus manually.

Download from Www.Somanuals.com. All Manuals Search And Download.

Usin g t h e w id e m o d e fu n ct io n

Se le ct in g t h e d e sire d m o d e

You can record a cinemalike picture (CINEMA) or a 16:9 wide picture to watch on the

16:9 wide-screen TV (16:9 FULL).

[b]

CINEMA

[a]

[c]

[e]

[f]

16:9 FULL

[d]

CINEMA

Black bands appear at the top and the bottom of the screen, and the viewfinder or LCD

screen [a] and a normal TV screen [b] look wide. You can also watch the picture

without black bands on a wide-screen TV [c].

16:9 FULL

The picture in the viewfinder or LCD screen [d] or on a normal TV [e] is horizontally

compressed. You can watch the picture of normal images on a wide-screen TV [f].

Download from Www.Somanuals.com. All Manuals Search And Download.

Usin g t h e w id e m o d e fu n ct io n

You can select the wide mode (OFF, CINEMA, 16:9FULL) in the menu system (p. 28).

To ca n ce l w id e m o d e

Select OFF in the menu system.

To w a t ch t h e t a p e re co rd e d in w id e m o d e

To watch the tape recorded in CINEMA mode, set the screen mode of the wide-screen

TV to zoom mode. To watch the tape recorded in 16:9 FULL mode, set it to full mode.

For details, refer to the instruction manual of your TV.

Note that the picture recorded in 16:9 FULL mode looks compressed on a normal TV.

Notes on w ide mode

• If wide mode is set to 16:9FULL, the Steady Shot function does not work and the

indicator flashes.

• In wide mode, you cannot select the bounce function with FADER.

• When you record in 16:9 FULL mode, the date or time indicator will be widened on

the wide-screen TV.

• If you dub a tape, the tape is copied in the same mode as the original recording.

• The wide mode is cancelled automatically 5 minutes after you remove the power

source.

• When recording, you cannot change the mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Usin g t h e PROGRAM AE fu n ct io n

Se le ct in g t h e b e st m o d e

You can select one of six PROGRAM AE (Auto Exposure) modes to suit your shooting

situation, referring to the following.

Spotlight mode

For subjects in spotlight, such as at the theater or a formal event.

a Soft Portrait mode

For zooming in on a still subject in telephoto mode, or for a subject behind an obstacle

such as a screen. Creates a soft background for subjects such as people or flowers, and

faithfully reproduces skin color.

A Sports Lesson mode

For recording fast-moving subjects such as in tennis or golf games.

Beach & Ski mode

For people or faces in strong light or reflected light, such as at a beach in midsummer or

on a ski slope.

Sunset & Moon mode

For recording subjects in dark environments such as sunsets, fireworks, neon signs, or

general night views.

Landscape mode

For distant subjects such as mountains or when recording a subject behind an obstacle

such as a window or screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Usin g t h e PROGRAM AE fu n ct io n

(1) Press PROGRAM AE.

(2) Turn the control dial to select the desired PROGRAM AE mode.

PROGRAM

To t u rn o ff p ro g ra m AE

Press PROGRAM AE.

Notes on focus setting

• In the Spotlight, Sports lesson and Beach & Ski modes, you cannot take close-ups

because the camcorder is set to focus only on subjects in the middle to far distance.

• In the Sunset & Moon and Landscape modes, the camcorder is set to focus only on

distant subjects.

Download from Www.Somanuals.com. All Manuals Search And Download.

Fo cu sin g m a n u a lly

Wh e n t o u se m a n u a l fo cu s

In the following cases you should obtain better results by adjusting the focus manually.

[a ]

[b ]

[c]

[d ]

• Insufficient light [a ]

• Subjects with little contrast - walls, sky, etc. [b ]

• Too much brightness behind the subject [c]

• Horizontal stripes [d ]

• Subjects through frosted glass

• Subjects beyond nets, etc.

• Bright subject or subject reflecting light

• Shooting a stationary subject when using a tripod

Download from Www.Somanuals.com. All Manuals Search And Download.

Fo cu sin g m a n u a lly

When focusing manually, first focus in telephoto before recording, and then reset the

shot length.

(1) Set FOCUS to MANUAL. The f indicator appears in the viewfinder or on

the LCD screen.

(2) Move the power zoom lever to the “T” side on the optical zoom zone until the

lever reaches the end.

(3) Turn the NEAR/ FAR dial to achieve a sharp focus.

(4) Set the desired shot length using the power zoom lever.

2 _W

AUTO

MANUAL

INFINITY

NEAR

FAR

To re t u rn t o a u t o fo cu s m o d e

Set FOCUS to AUTO. The f indicator in the viewfinder or on the LCD screen

disappears.

Shooting in relatively dark places

Shoot at wide-angle after focusing in the telephoto position.

To re co rd a ve ry d ist a n t su b je ct

Push FOCUS down to INFINITY. The lens focuses on the most distant subject while

FOCUS is held down. When it is released, manual focus mode is resumed.

Use this function when shooting through a window or a screen, to focus on a most

distant subject.

Note on manual focusing

The following indicators may appear:

when recording a very distant subject.

when the subject is too close to focus on.

Download from Www.Somanuals.com. All Manuals Search And Download.

En jo yin g p ict u re e ffe ct

Se le ct in g p ict u re e ffe ct

You can make pictures like those of television with the Picture Effect function.

[a ]

[b ]

[c]

[d ]

[e ]

[f]

PASTEL [a]

The contrast of the picture is emphasized, and the picture looks like an animated

cartoon.

NEG. ART [b]

The color and brightness of the picture is reversed.

SEPIA

The picture is sepia.

B&W

The picture is monochrome (black and white).

SOLARIZE [c]

The light intensity is more clear, and the picture looks like an illustration.

MOSAIC [d]

The picture is mosaic.

SLIM [e]

The picture expands vertically.

STRETCH [f]

The picture expands horizontally.

Download from Www.Somanuals.com. All Manuals Search And Download.

En jo yin g p ict u re e ffe ct

Usin g p ict u re e ffe ct fu n ct io n

(1) Press PICTURE EFFECT.

(2) Turn the control dial to select the desired picture effect mode.

PICTURE EFFECT

PASTEL

NEG. ART

SEPIA

B & W

SOLARIZE

MOSAIC

SLIM

STRETCH

To t u rn o ff p ict u re e ffe ct

Press PICTURE EFFECT. The indicator in the viewfinder or on the LCD screen goes

out.

Note on the picture effect

When you turn the power off, the camcorder returns automatically to normal mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Ad ju st in g t h e e xp o su re

Wh e n t o a d ju st t h e e xp o su re

Adjust the exposure manually under the following cases.

[a ]

[b ]

[a ]

• The background is too bright (back lighting)

• Insufficient light: most of the picture is dark

[b ]

• Bright subject and dark background

• To record the darkness faithfully

Ad ju st in g t h e e xp o su re

(1) Press EXPOSURE.

(2) Turn the control dial to adjust the brightness.

EXPOSURE

–

To re t u rn t o a u t o m a t ic e xp o su re m o d e

Press EXPOSURE again.

Download from Www.Somanuals.com. All Manuals Search And Download.

Ad ju st in g t h e e xp o su re

Shooting w ith the sun behind you

If the light source is behind your subject, or in the following situations, the subject will

be recorded too dark.

• The subject is indoors and there is a window behind the subject.

• Bright light sources are included in the scene.

• When shooting a person wearing white or shiny clothes in front of a white

background, the face will be recorded too dark.

Shooting in the dark

We recommend you to use the built-in light (CCD-TRV93 only) or a video light (not

supplied). To get the best color, you must maintain a sufficient light level.

When you adjust the exposure manually

• BACK LIGHT does not work.

• If you change the PROGRAM AE mode, the camcorder automatically returns to

automatic exposure mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Su p e rim p o sin g a t it le

You can select one of eight preset titles and two custom titles. You can also select the

language, color, size and position of titles.

Su p e rim p o sin g t it le s

(1) Press TITLE to display the title menu.

(2) Turn the control dial to select

, then press the dial.

(3) Turn the control dial to select the desired title, then press the dial. The titles are

displayed in the language you selected.

(4) Turn the control dial to select the color, size, or position, then press the dial.

(5) Turn the control dial to select the desired item, then press the dial.

(6) Repeat step 4 and 5 until the title is arranged as desired.

(7) Press control dial again to complete the setting.

(8) When you want to stop recording the title, press TITLE.

PRESET TITLE

HELLO!

PRESET TITLE

HELLO!

TITLE

HAPPY BIRTHDAY

HAPPY HOLIDAYS

CONGRATULATIONS!

OUR SWEET BABY

WEDDING

VACATION

THE END

HAPPY BIRTHDAY

HAPPY HOLIDAYS

CONGRATULATIONS!

OUR SWEET BABY

WEDDING

VACATION

THE END

RETURN

[TITLE] : END

PRESET TITLE

HELLO!

TITLE

HAPPY BIRTHDAY

HAPPY HOLIDAYS

CONGRATULATIONS!

OUR SWEET BABY

WEDDING

THE END

VACATION

THE END

RETURN

[TITLE] : END

SIZE

SMALL

TITLE

SIZE

LARGE

THE END

[TITLE] : END

THE END

Download from Www.Somanuals.com. All Manuals Search And Download.

Su p e rim p o sin g a t it le

To su p e rim p o se t h e t it le fro m b e g in n in g

After step 7, press START/ STOP to start recording.

To su p e rim p o se t h e t it le w h ile yo u a re re co rd in g

After pressing START/ STOP to start recording, start from step 1. In this case, beep is

not heard.

To se le ct t h e la n g u a g e o f p re se t t it le

When you want to select the language, select before step 2. Then select language and

return to step 2.

To u se t h e cu st o m t it le

When you want to use the custom title, select

in step 2.

Notes on superimposing a title

• If you have not given any custom title, “– – – – ...” appears on the display.

• The FADER function works while the title is displayed, however, the title does not

fade.

• If you display the menu or title menu while superimposing a title, the title is not

recorded while the menu or title menu is being displayed.

Title color changes as follow s :

WHITE ˜ YELLOW ˜ VIOLET ˜ RED ˜ CYAN ˜ GREEN ˜ BLUE

Title size changes as follow s :

SMALL ˜ LARGE

Title position changes as follow s :

When you select the title size “SMALL”, you can choose 9 positions. When you select

the title size “LARGE” you can choose 8 positions.

Notes on the title

• Depending on size or position of the title, both of date and time or either of them is

not displayed.

• If you input 13 characters or more for a LARGE title, the title is automatically reduced

into a proper size after the position is set.

• When the title is displayed, LCD BRIGHT and VOLUME indicators do not appear.

Download from Www.Somanuals.com. All Manuals Search And Download.

Ma kin g yo u r o w n t it le s

You can make up to two titles and store them in the camcorder. We recommend to set

the POWER switch to VTR or eject the cassette before you begin.

Your title can have up to 20 characters.

(1) Press TITLE to display the title menu.

(2) Turn the control dial to select , then press the dial.

(3) Turn the control dial to select the first line (CUSTOM1) or second line

(CUSTOM2), then press the dial.

(4) Turn the control dial to select the column of the desired character, then press

the dial.

(5) Turn the control dial to select the desired character, then press the dial.

(6) Repeat step 4 and 5 until you finish the title.

(7) For finishing the titling work, turn the control dial to select SET, then press the

dial.

TITLE

TITLE SET

CUSTOM1 " – – – – – – – – – – ··"

CUSTOM2 " – – – – – – – – – – ··"

TITLE SET

––––––––––––––––––––

RETURN

[TITLE] : END

TITLE SET

––––––––––––––––––––

RETURN

[TITLE] : END

TITLE SET

––––––––––––––––––––

[TITLE] : END

TITLE SET

SUMMER CAMP IN LAKE

TITLE SET

–

–––––––––––––––––––

––––––––––––––––––––

[TITLE] : END

Download from Www.Somanuals.com. All Manuals Search And Download.

Ma kin g yo u r o w n t it le s

To e d it a t it le yo u h a ve st o re d

In step 3, select CUSTOM1 or CUSTOM2, depending on which title you want to edit,

then change the title.

Note

You can not enter over 20 characters title.

If you take 5 minutes or longer to enter characters w hile a cassette is in the

camcorder

The power goes off automatically. Characters you have entered remain. Turn

STANDBY down once and then up again, then proceed from step 1.

To d e le t e a t it le

In step 4, turn the control dial to select [M] then press the dial. The last character is

erased. Repeat this step until all characters are deleted. Do not erase the title by

selecting empty spaces. If you do so, a title full of empty spaces is stored.

Re co rd in g w it h t h e d a t e /t im e

Before you start recording or during recording, press DATE or TIME. You can record

the date or time displayed in the viewfinder or on the LCD screen with the picture.

Press DATE (or TIME), then press TIME (or DATE) to display the date and time

together.

The clock is set to East Coast Standard Time at the factory. You can reset the clock in

the menu system.

DATE

TIME

JUL 4 1998

5:30:00PM

TIME

DATE

5:30:00PM

To st o p re co rd in g w it h t h e d a t e a n d /o r t im e

Press DATE and/ or TIME again. The date and/ or time indicator disappears. The

recording continues.

Download from Www.Somanuals.com. All Manuals Search And Download.

Op t im izin g t h e re co rd in g co n d it io n

Use this feature to check the tape condition before recording, so that you can get the

best possible picture (ORC).

(1) While the camcorder is in Standby mode, press MENU to display the menu.

(2) Turn the control dial to select Ò, then press the dial.

(3) Turn the control dial to select ORC TO SET, then press the dial.

“START/ STOP KEY” flashes.

(4) Press START/ STOP.

The camcorder takes about 5 to 10 seconds to check the tape condition and

then returns to Standby mode.

TAPE SET

REC MODE

ORC TO SET

REMAIN

TAPE SET

REC MODE

ORC TO SET

REMAIN

RETURN

TAPE SET

REC MODE

ORC TO SET

REMAIN

RETURN

START/STOP

KEY

STBY 0:00:00

ORC

START/STOP

Ea ch t im e yo u in se rt t h e ca sse t t e

Perform the above procedures.

Notes on the ORC function

• When you set ORC TO SET, the recording on the tape is erased for about 0.1 second so

that the camcorder can check the tape condition. Be careful when you use a recorded

tape. The 0.1 second blank is erased if you record from the point where you set ORC

TO SET for more than 2 seconds, or if you record over the blank.

• You cannot use this function on a tape with the red mark on the cassette exposed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Usin g t h e b u ilt -in lig h t

– CCD-TRV93 o n ly

You can use the built-in light to suit your shooting situation. The recommended

distance between the subject and camcorder is about 5 feet (1.5 meters).

While the camcorder is in Standby mode, slide LIGHT to ON. The built-in light turns

on.

The built-in light turns on/ off by turning on/ off STANDBY.

To st o p u sin g t h e b u ilt -in lig h t

Slide LIGHT to OFF.

To t u rn o n t h e b u ilt -in lig h t a u t o m a t ica lly

Slide LIGHT to AUTO.

The built-in light automatically turns on and off according to the ambient brightness.

However, if the built-in light turns on for more than about 5 minutes, it automatically

turns off. In this case, turn STANDBY down once and turn it up again.

Notes

• The battery pack is quickly discharging while the built-in light is turned on. Slide

LIGHT to OFF when not in use.

• When you do not use the camcorder, slide LIGHT to OFF and remove the battery pack

to avoid turning on the built-in light.

• When flickering occurs while shooting in AUTO mode, Slide LIGHT to ON.

• The built-in light may turn on/ off when you use the PROGRAM AE or BACK LIGHT

function.

• When inserting or ejecting a cassette, the built-in light may be turned off.

• While working the End Search function, the built-in light is turned off.

CAUTION

Be careful not to touch the lighting section, because the plastic w indow and

surrounding surfaces are hot w hile the light is on. It remains hot for a w hile after

the light is turned off.

DANGER

Not to be handled by children.

Emits intense heat and light.

Use w ith caution to reduce the risk of fire or injury to persons.

Do not direct light at persons or materials from less than 4 feet (1.22 meters)

during use and until cool.

Slide LIGHT to OFF w hen not in use.

Download from Www.Somanuals.com. All Manuals Search And Download.

Usin g t h e b u ilt -in lig h t

Re p la cin g t h e b u lb

Use the Sony XB-3D halogen lamp (not supplied). The supplied halogen lamp is not on

the market. Purchase the Sony XB-3D halogen lamp.

Remove the power source before replacing the bulb.

(1) While pushing the hole under the built-in light unit using a wire, remove the

unit.

(2) Turn the bulb housing counterclockwise and detach from the built-in light

unit.

(3) Replace the bulb using a dry cloth.

(4) Attach the bulb housing turning it clockwise, then replace the built-in light

unit.

CAUTION

• When replacing the bulb, use only the Sony XB-3D halogen lamp (not supplied) to

reduce the risk of fire.

• To prevent possible burn hazard, disconnect the power source before replacing and

do not touch the bulb until the bulb becomes cool enough to handle (for about 30

minutes or more).

Note

To prevent the bulb from being smudged with finger prints, handle it with a dry cloth,

etc. If the bulb is smudged, wipe it completely.

Download from Www.Somanuals.com. All Manuals Search And Download.

Re le a sin g t h e STEADY SHOT fu n ct io n

When the Steady Shot function is working, the camcorder compensates for camera-

shake.

You can release the Steady Shot function when you do not need to use the Steady Shot

function. The “

” indicator appear in the viewfinder or on the LCD screen. Do not use

the Steady Shot function when shooting a stationary object with a tripod.

You can select ON or OFF in the menu system (p. 28).

To a ct iva t e t h e St e a d y Sh o t fu n ct io n a g a in

Set STEADYSHOT to ON in the menu system.

Notes on the Steady Shot function

• The Steady Shot function will not correct excessive camera-shake.

• When you set STEADYSHOT to ON or OFF in the menu system, the exposure may

fluctuate.

• Steady Shot does not operate in 16:9 FULL mode. If you set STEADYSHOT to ON in

the menu system, the

indicator flashes.

Download from Www.Somanuals.com. All Manuals Search And Download.

Wa t ch in g o n a TV scre e n

Connect the camcorder to your TV or VCR to watch the playback picture on the TV

screen. When monitoring the playback picture by connecting the camcorder to your TV,

we recommend you to use house current for the power source.

While playing back on a TV screen, close the LCD panel. Otherwise, picture distortion

may occur.

Co n n e ct in g d ire ct ly t o a TV/VCR w it h Vid e o /Au d io in p u t ja cks

When connecting the A/ V connecting cable, make sure you connect the plug to jacks of

the same color.

Open the jack cover. With using the supplied A/ V connecting cable, connect the

camcorder to the LINE IN inputs on the TV or VCR connected to the TV. Set the TV/

VCR selector on the TV to VCR. When connecting to the VCR, set the input selector on

the VCR to LINE.

(not supplied)

S VIDEO

VIDEO

[a ]

[b ]

S VIDEO

VIDEO

AUDIO

: Signal flow

If your TV or VCR has an S video jack, connect using the S video cable (not supplied)

[a] to obtain a high quality picture . If you are going to connect the camcorder using the

S video cable (not supplied) [a ], you do not need to connect the yellow (video) plug of

the A/ V connecting cable [b ].

If your TV or VCR is a monaural type

Connect only the white plug for audio on both the camcorder and the TV or the VCR.

With this connection, the sound is monaural even in stereo model.

To connect to a TV or VCR w ithout Video/Audio input jacks

Use an RFU-95UC RFU adaptor (not supplied).

Download from Www.Somanuals.com. All Manuals Search And Download.

Wa t ch in g o n a TV scre e n

Usin g t h e AV co rd le ss IR re ce ive r

Once you connect the AV cordless IR receiver (not supplied) having the

LASER

LINK mark to your TV or VCR, you can easily view the picture on your TV. For details,

refer to the operating instructions of the AV cordless IR receiver.

LASER LINK is a system which transmits and receives a picture and sound between

video equipment having the

mark by using infrared rays.

LASER LINK is a trademark of Sony Corporation.

To p la y b a ck o n a TV

(1) After connecting your TV and AV cordless IR receiver, set the POWER switch

on the AV cordless IR receiver to ON.

(2) Set the POWER switch on the camcorder to VTR.

(3) Turn the TV on and set the TV/ VCR selector on the TV to VCR.

(4) Press LASER LINK. The lamp of the LASER LINK button lights up.

(5) Press ( on the camcorder to start playback.

(6) Point the LASER LINK emitter at the AV cordless IR receiver.

To ca n ce l t h e LASER LINK fu n ct io n

Press LASER LINK.

If you use a Sony TV

• You can turn on the TV automatically when you press the LASER LINK or ( button.

To do so, set the AUTO TV ON to ON in the menu system and turn the TV’s main

switch on, then do either of the following;

• Point the LASER LINK emitter towards the TV’s remote sensor and press LASER

LINK.

• Turn on the LASER LINK button and press (.

• You can switch the video input of the TV automatically to the one which the AV

cordless IR receiver is connected. To do so, set the AUTO TV ON to ON and the TV

INPUT to the same video input (1,2,3) in the menu system. With some models,

however the picture and sound may be disconnected momentarily when the video

input is switched.

• The above feature may not work with some TV models.

Note

When LASER LINK is activated (the LASER LINK button is lit), the camcorder

consumes power. Press and turn off the LASER LINK button when it is not needed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Ed it in g o n t o a n o t h e r t a p e

You can create your own video program by editing with any other h 8 mm, H Hi8,

j VHS, k S-VHS,  VHSC, K S-VHSC, l Betamax or ¬ ED Betamax

VCR that has video/ audio inputs.

Be fo re e d it in g

Connect the camcorder to the VCR using the supplied A/ V connecting cable.

Set the input selector on the VCR to LINE, if available.

Set EDIT to ON in the menu system (p. 28 ).

St a rt in g e d it in g

Turn down the volume of the camcorder while editing. Otherwise, picture distortion

may occur.

(1) Insert a blank tape (or a tape you want to record over) into the VCR, and insert

your recorded tape into the camcorder.

(2) Play back the recorded tape on the camcorder until you locate the point just

before where you want to start editing, then press P to set the camcorder in

playback pause mode.

(3) On the VCR, locate the recording start point and set the VCR in recording

pause mode.

(4) First press P on the camcorder, and after a few seconds press P on the VCR to

start editing.

To e d it m o re sce n e s

Repeat steps 2 to 4.

To su p e rim p o se t h e t it le w h ile yo u a re e d it in g

You can superimpose the title while you are editing. Refer to “Superimpose a title”

(p. 47).

To st o p e d it in g

Press p on both the camcorder and the VCR.

Note on Fine Synchro Edit

If you connect a video deck that has the Fine Synchro Edit feature to the LANC l jack

of the camcorder, using a LANC cable (not supplied), the edit will be even more

precise.

Download from Www.Somanuals.com. All Manuals Search And Download.

Re co rd in g fro m a VCR o r TV

You can record a tape from another VCR or a TV program from a TV that has video/

audio outputs. Connect the camcorder to the VCR or TV using the supplied A/ V cable.

Turn down the volume of the camcorder while editing. Otherwise, picture distortion

may occur.

(1) While pressing the small green button on the POWER switch, set it to VTR.

(2) Set DISPLAY to LCD in the menu system. Then press r REC and the button

on the right together on the camcorder at the point where you want to start

recording.

In recording and recording pause mode, S video and VIDEO/ AUDIO jacks

automatically work as input jacks.

POWER

REC

CAMERA

OFF

VTR

(not supplied)

S VIDEO

VIDEO

VCR

[a ]

[b ]

S VIDEO

VIDEO

AUDIO

: Signal flow

If your VCR or TV has an S video jack, connect using the S video cable (not supplied)

[a ] to obtain a high quality picture.

If your VCR or TV is a monaural type, connect only the white plug for audio on both

the camcorder and the VCR or TV.

If your VCR or TV does not have an S VIDEO OUT jack, connect cable [b ]. Do not

connect the S video cable (not supplied) [a ] to the camcorder.

To stop recording

Press p.

Note on recording

You cannot record a picture that has a copyright control signal for copyright protection

of software. “COPY INHIBIT” appears if you try to record such a picture.

Download from Www.Somanuals.com. All Manuals Search And Download.

Ad d it io n a l in fo rm a t io n

Ch a n g in g t h e lit h iu m b a t t e ry in t h e ca m co rd e r

Your camcorder is supplied with a lithium battery installed. When the battery becomes

weak or dead, the I indicator flashes in the viewfinder for about 5 seconds when you

set the POWER switch to CAMERA. In this case, replace the battery w ith a Sony

CR2025 or Duracell DL-2025 lithium battery. Use of any other battery may present

a risk of fire or explosion. Discard used batteries according to the manufacturer’s

instructions.

The lithium battery for the camcorder lasts for about 1 year under normal operation.

(The lithium battery that comes installed at the factory may not last 1 year.)

JUL 4 1998

No t e s o n lit h iu m b a t t e ry

• Keep the lithium battery out of the reach of children.

Should the battery be sw allow ed, immediately consult a doctor.

• Wipe the battery with a dry cloth to assure a good contact.

• Do not hold the battery with metallic tweezers, otherwise a short-circuit may occur.

• Note that the lithium battery has a positive (+) and a negative (–) terminals as

illustrated. Be sure to install the lithium battery so that terminals on the battery

match the terminals on the camcorder.

(+)

(---)

WARNING

The battery may explode if mistreated. Do not recharge, disassemble, or dispose of in

fire.

Download from Www.Somanuals.com. All Manuals Search And Download.

Ch a n g in g t h e lit h iu m b a t t e ry in t h e ca m co rd e r

Ch a n g in g t h e lit h iu m b a t t e ry

When replacing the lithium battery, keep the battery pack or other power source

attached. Otherwise, you will need to reset the date, time and other items in the menu

system retained by the lithium battery.

(1) Open the LCD panel and open the lid of the lithium battery compartment.

(2) Push the lithium battery down once and pull it out from the holder.

(3) Install the lithium battery with the positive (+) side facing out. Close the lid.

₂5

Download from Www.Somanuals.com. All Manuals Search And Download.

Re se t t in g t h e d a t e a n d t im e

You can reset the date and time in the menu system.

(1) While the camcorder is in Standby mode, press MENU to display the menu.

(2) Turn the control dial to select

, then press the dial.

(3) Turn the control dial to select CLOCK SET, then press the dial.

(4) Turn the control dial to adjust the desired year, then press the dial.

(5) Set the month, day, hour and minute by turning the control dial and pressing

the dial.

(6) Press MENU to erase the menu display.

SETUP MENU

CLOCK SET

AUTO DATE

AUTO TV ON

TV INPUT

LTR SIZE

SETUP MENU

CLOCK SET

AUTO DATE

AUTO TV ON

TV INPUT

LTR SIZE

JAN

1997

CLOCK SET

AUTO DATE

AUTO TV ON

TV INPUT

LTR SIZE

DEMO MODE

RETURN

12:00:00AM

1997 JAN

DEMO MODE

RETURN

12 00 AM

[MENU] : END

INITIAL SET

CLOCK SET

AUTO DATE

AUTO TV ON

TV IN SEL

MENU DISP

LANGUAGE

INITIAL SET

CLOCK SET

AUTO DATE

INITIAL SET

CLOCK SET

AUTO DATE

INITIAL SET

CLOCK SET

AUTO DATE

1998 JUL

AUTO TV ON

TV IN SEL

MENU DISP

LANGUAGE

TV IN SEL

MENU DISP

LANGUAGE

TV IN SEL

MENU DISP

LANGUAGE

TV SYSTEM

DEMO MODE

RETURN

12 00 AM

00 PM

30 AM

TV SYSTEM

DEMO MODE

RETURN

TV SYSTEM

DEMO MODE

RETURN

TV SYSTEM

DEMO MODE

RETURN

[MENU] : END

1998 JAN

12 00 AM

To co rre ct t h e d a t e a n d t im e se t t in g

Repeat the above procedure.

To ch e ck t h e p re se t d a t e a n d t im e

Press DATE to display the date indicator.

Press TIME to display the time indicator.

When you press the same button again, the indicator goes off.

The year changes as follow s:

1997

1998

· · · · n 2029

Note on the time indicator

The internal clock of this camcorder operates on a 12-hour cycle.

• 12:00 AM Stands for midnight.

• 12:00 PM Stands for noon.

Download from Www.Somanuals.com. All Manuals Search And Download.

Sim p le se t t in g o f clo ck b y t im e d iffe re n ce

You can easily set the clock for a local time by a time difference in the menu system.

(1) While the camcorder is the standby mode, press MENU to display the menu.

(2) Turn the control dial to select

, then press the dial.

(3) Turn the control dial to select WORLD TIME, then press the dial.

(4) Turn the control dial to set a time difference, and press the dial. The hour of

clock changes in relation to a time difference which you set.

(5) Press MENU to erase the menu display.

OTHERS

WORLD TIME

BEEP

COMMANDER

DISPLAY

REC LAMP

INDICATOR

OTHERS

WORLD TIME

BEEP

COMMANDER

DISPLAY

REC LAMP

INDICATOR

RETURN

OTHERS

JUL 4 1998

5:30:00PM

WORLD TIME

BEEP

COMMANDER

DISPLAY

REC LAMP

INDICATOR

RETURN

[MENU] : END

OTHERS

WORLD TIME

BEEP

COMMANDER

DISPLAY

REC LAMP

INDICATOR

RETURN

OTHERS

JUL 4 1998

9:30:00AM

WORLD TIME

BEEP

COMMANDER

DISPLAY

REC LAMP

INDICATOR

RETURN

–

HRS

–

HRS

[MENU] : END

Note on WORLD TIME

If the time is not set, WORLD TIME does not work.

Download from Www.Somanuals.com. All Manuals Search And Download.

Usa b le ca sse t t e s a n d p la yb a ck m o d e s

Se le ct in g ca sse t t e t yp e s

This Hi8 system is an extension of the standard 8 mm system, and was developed to

realize higher picture quality.

You can use either Hi8 or standard 8 mm video cassette for this camera. When you use

a Hi8 video cassette, the recording is made in the Hi8 system. When you use a standard

8 mm video cassette, the recording is made in the standard 8 mm system. Standard 8

mm video cassette is incapable of recording in the Hi8 system.

If you intend to use a standard 8 mm video recorder/ player to play back a video tape,

you are required to use a standard 8 mm video cassette for recording.

Wh a t is vid e o Hi8

“XR”, that is an abbreviation of “Extended Resolution”, represents the new type of 8

mm camcorder that has the property to realize more quality picture compared with the

conventional camcorders including the Hi8 models. You can record and play back

pictures more clearly in detail with the “XR” camcorder.

Video tape recorded by a camcorder having the “XR” function shows excellent picture

quality at maximum when it is played back by the “XR” camcorder.

When video tape recorded by this “XR” camcorder is played back by a conventional

Hi8 camcorder or when video tape recorded by a conventional Hi8 camcorder is played

back by this “XR” camcorder, the playback picture quality is in the normal quality of

the Hi8 camcorder.

Wh e n yo u p la y b a ck

The playback mode (SP/ LP) and system (Hi8/ standard 8 mm) are selected

automatically according to the format in which the tape has been recorded. The quality

of the recorded picture in LP mode, however, will not be as good as that in SP mode.

No t e o n AFM HiFi st e re o

When you play back a tape, the sound will be in monaural if:

• You record the tape using this camcorder, then play it back on an AFM HiFi monaural

video recorder/ player.

• You record the tape on an AFM HiFi monaural video recorder, then play it back on

this camcorder.

Fo re ig n 8 m m vid e o

Because the TV color systems differ from country to country, you may not be able to

play back foreign pre-recorded tapes. Refer to the list of “Using your camcorder

abroad” to check the TV color system of foreign countries.

Download from Www.Somanuals.com. All Manuals Search And Download.

Tip s fo r u sin g t h e b a t t e ry p a ck

This section shows you how you can get the most out of your battery pack.

Pre p a rin g t h e b a t t e ry p a ck

Alw a ys ca rry a d d it io n a l b a t t e rie s

Have sufficient battery pack power to do 2 to 3 times as much recording as you have

planned.

Ba t t e ry life is sh o rt e r in a co ld e n viro n m e n t

Battery efficiency is decreased, and the battery will be used up more quickly, if you are

recording in a cold environment.

To sa ve b a t t e ry p o w e r

Turn STANDBY down when not recording to save battery power.

A smooth transition between scenes can be made even if recording is stopped and

started again. While you are positioning the subject, selecting an angle, or looking

through the viewfinder lens or on the LCD screen, the lens moves automatically and the

battery is used. The battery is also used when a tape is inserted or removed.

Wh e n t o re p la ce t h e b a t t e ry p a ck

While you are using your camcorder, the remaining battery indicator decreases

gradually as battery power is used up. Remaining time in minutes appears.

When the remaining battery indicator reaches the lowest point, the i indicator may

appear and start flashing in the viewfinder or on the LCD screen.

When the i indicator changes from slow flashing to rapid flashing while you are

recording, set the POWER switch to OFF on the camcorder and replace the battery pack.

Leave the tape in the camcorder to obtain a smooth transition between scenes after the

battery pack has been replaced.

Download from Www.Somanuals.com. All Manuals Search And Download.

Tip s fo r u sin g t h e b a t t e ry p a ck

No t e s o n t h e re ch a rg e a b le b a t t e ry p a ck

Ca u t io n

Never leave the battery pack in temperatures above 140°F (60°C), such as in a car

parked in the sun or under direct sunlight.

Th e b a t t e ry p a ck h e a t s u p

During charging or recording, the battery pack heats up. This is caused by energy that

has been generated and a chemical change that has occurred inside the battery pack.

This is not cause for concern and is normal.

Be su re t o o b se rve t h e fo llo w in g

• Keep the battery pack away from fire.

• Keep the battery pack dry.

• Do not open nor try to disassemble the battery pack.

• Do not expose the battery pack to any mechanical shock.

Th e life o f t h e b a t t e ry p a ck

If the battery indicator flashes rapidly just after turning on the camcorder with a fully

charged battery pack, the battery pack should be replaced with a new fully charged

one.

Ch a rg in g t e m p e ra t u re

You should charge batteries at temperatures from 50°F to 86°F (from 10°C to 30°C).

Lower temperatures require a longer charging time.

Download from Www.Somanuals.com. All Manuals Search And Download.

Tip s fo r u sin g t h e b a t t e ry p a ck

No t e s o n t h e “ In fo LITHIUM” b a t t e ry p a ck

Wh a t is “ In fo LITHIUM”

The “InfoLITHIUM” is a lithium ion battery pack which can exchange data with

compatible video equipment about its battery consumption. Sony recommends that you

use the “InfoLITHIUM” battery pack with video equipment having the

mark.

When you use this battery pack with video equipment having the

mark, the

video equipment will indicate the remaining battery time in minutes*. However, if you

use it with video equipment not having this mark, the remaining battery capacity will

not be indicated in minutes.

“InfoLITHIUM“ is a trademark of Sony Corporation.

* The indication may not be accurate depending on the condition and environment

which the equipment is used under.

How the battery consumption is displayed

The power consumption of the camcorder changes depending on its use, such as how

the autofocusing is working.

While checking the condition of the camcorder, the “InfoLITHIUM” battery pack

measures the battery consumption and calculates the remaining battery power. If the

condition changed drastically, the remaining battery indication may suddenly decrease

or increase by more than 2 minutes.

Even if 5 to 10 minutes is indicated as the battery remaining time on the LCD screen or

in the viewfinder, the i indicator may also flash under some condition.

To obtain more accurate remaining battery indication

Set the camcorder to recording standby mode and point towards a stationary object. Do

not move the camcorder for 30 seconds or more.

• If the indication seems incorrect, recharge the battery pack fully (Full charge¹⁾). Note

that if you have used the battery in a hot or cold environment for long time, or you

have repeated charging many times, the battery pack may not be able to show the

correct time even after being fully charged.

• After you have used the “InfoLITHIUM” battery pack with an equipment not having

the

having the

mark, make sure that you use up the battery pack on the equipment

mark and then recharge fully.

Why the remaining battery indication does not match the continuous recording

time in the operating instructions

The recording time is affected by the environmental temperature and conditions. The

recording time becomes very short in a cold environment. The continuous recording

time in the operating instructions is measured under the condition of using a fully

charged (or normal charged) battery pack in 77°F (25°C). As the environmental

temperature and condition are different when you actually use the camcorder, the

remaining battery time is not same as the continuous recording time in the operating

instructions.

¹⁾Full charge: Charging until FULL appears in the display window.

Download from Www.Somanuals.com. All Manuals Search And Download.

Ma in t e n a n ce in fo rm a t io n a n d p re ca u t io n s

No t e s o n t h e b a t t e ry ca se

– CCD-TRV75/TRV85/TRV93 o n ly

• Use only w ith alkaline batteries. You cannot use the battery case w ith

manganese batteries or size AA (LR6) rechargeable NiCd batteries.

• Using w ith Sony alkaline batteries is preferable.

• Battery life is remarkably shorter in a cold environment (lower than 50°F/ 10°C).

• Keep the metal part clean. If it gets dirty, wipe it with a soft cloth.

• Do not disassemble or convert the battery case.

• Do not expose the battery case to any mechanical shock.

• During recording, the battery case heats up. This is not cause for concern.

• Prevent the electrode in the battery case from coming in contact with a metal object.

• If you will not use the battery case for a long time, detach the battery case from the

camcorder and remove the batteries from the battery case.

Mo ist u re co n d e n sa t io n

If the camcorder is brought directly from a cold place to a warm place, moisture may

condense inside the camcorder, on the surface of the tape, or on the lens. In this

condition, the tape may stick to the head drum and be damaged or the unit may not

operate correctly. To prevent possible damage under these circumstances, the

camcorder is furnished with moisture sensors. Please, take the following precautions.

In sid e t h e ca m co rd e r

If there is moisture inside the camcorder, the beep sounds and the { indicator flashes.

If this happens, none of the functions except cassette ejection will work. Open the

cassette compartment, turn off the camcorder, and leave it about 1 hour. When 6

indicator flashes at the same time, the cassette is inserted in the camcorder. Eject the

cassette, turn off the camcorder, and leave also the cassette about 1 hour. The camcorder

can be used again if the { indicator does not appear when the power is turned on

again.

On t h e le n s

If moisture condenses on the lens, no indicator appears, but the picture becomes dim.

Turn off the power and do not use the camcorder for about 1 hour.

Ho w t o p re ve n t m o ist u re co n d e n sa t io n

When bringing the camcorder from a cold place to a warm place, put the camcorder in a

plastic bag and allow it to adapt to room conditions over a period of time.

(1) Be sure to tightly seal the plastic bag containing the camcorder.

(2) Remove the bag when the air temperature inside it has reached the

temperature surrounding it (after about 1 hour).

Download from Www.Somanuals.com. All Manuals Search And Download.

Ma in t e n a n ce in fo rm a t io n a n d p re ca u t io n s

Vid e o h e a d cle a n in g

To ensure normal recording and clear pictures, clean the video heads. When the

v indicator and “

CLEANING CASSETTE” message appear one after another or

playback pictures are “noisy” or hardly visible, the video heads may be dirty.

[a]

[b]

[a] Slightly dirty

[b] Very dirty

If this happens, clean the video heads with the Sony V8-25CLH/ V8-25CLD cleaning

cassette (not supplied). After checking the picture, if it is still “noisy,” repeat the

cleaning. (Do not repeat cleaning more than 5 times in one session.)

Ca u t io n

Do not use a commercially available wet-type cleaning cassette. It may damage the

video heads.

Note

If the Sony V8-25CLH/ V8-25CLD cleaning cassette is not available in your area, consult

your nearest Sony dealer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Ma in t e n a n ce in fo rm a t io n a n d p re ca u t io n s

Re m o vin g d u st fro m in sid e t h e vie w fin d e r

– CCD-TRV75/TRV85/TRV715/TRV815 o n ly

(1) Remove the screw with a screwdriver (not supplied). Then, while sliding the

RELEASE knob, turn the eyecup in the direction of the arrow and pull it out.

(2) Clean the surface with a commercially available blower.

To re a t t a ch t h e e ye cu p

(1) Align the groove on the eyecup with the • mark on the barrel.

(2) Turn the eyecup in the direction of the arrow. Then replace the screw.

Caution

Do not remove any other screws. You may remove only the screw to remove the

eyecup.

Download from Www.Somanuals.com. All Manuals Search And Download.

Ma in t e n a n ce in fo rm a t io n a n d p re ca u t io n s

Pre ca u t io n s

Ca m co rd e r o p e ra t io n

• Operate the camcorder on 7.2 V (battery pack) or 8.4 V (AC power adaptor).

• For DC or AC operation, use the accessories recommended in this manual.

• Should any solid object or liquid get inside the casing, unplug the camcorder and have

it checked by a Sony dealer before operating it any further.

• Avoid rough handling or mechanical shock. Be particularly careful of the lens.

• Keep the POWER switch setting to OFF when not using the camcorder.

• Do not wrap up the camcorder and operate it since heat may build up internally.

• Keep the camcorder away from strong magnetic fields or mechanical vibration.

• Do not push the LCD screen.

• If the camcorder is used in a cold place, a residual image may appear on the LCD

screen. This is not a malfunction.

• While using the camcorder, the back of the LCD screen may heat up. This is not a

malfunction.

Bu ilt -in lig h t

– CCD-TRV93 only

• Do not knock or jolt the built-in light while it is turned on as it may damage the bulb

or shorten the life of the bulb.

• Do not leave the built-in light on while it is resting on or against something; it may

cause a fire or damage the built-in light.

On h a n d lin g t a p e s

Do not insert anything in the small holes on the rear of the cassette. These holes are

used to sense the type of tape, thickness of tape and if the recording tab is in or out.

Ca m co rd e r ca re

• When the camcorder is not to be used for a long time, remove the tape. Periodically

turn on the power, operate the camera and player sections and play back a tape for

about 3 minutes.

• If fingerprints or debris make the LCD screen dirty, we recommend using a LCD

Cleaning Kit (not supplied) to clean the LCD screen.

• Clean the lens with a soft brush to remove dust. If there are fingerprints on it, remove

them with a soft cloth.

• Clean the camcorder body with a dry soft cloth, or a soft cloth lightly moistened with

a mild detergent solution. Do not use any type of solvent which may damage the

finish.

• Do not let sand get into the camcorder. When you use the camcorder on a sandy

beach or in a dusty place, protect it from the sand or dust. Sand or dust may cause the

unit to malfunction, and sometimes this malfunction cannot be repaired.

Download from Www.Somanuals.com. All Manuals Search And Download.

Ma in t e n a n ce in fo rm a t io n a n d p re ca u t io n s

AC p o w e r a d a p t o r

• Unplug the unit from the wall outlet when not in use for a long time. To disconnect

the power cord, pull it out by the plug. Never pull the power cord itself.

• Do not operate the unit with a damaged cord or if the unit has been dropped or

damaged.

• Do not bend the power cord forcibly, or put a heavy object on it. This will damage the

cord and may cause a fire or electrical shock.

• Be sure that nothing metallic comes into contact with the metal parts of the connecting

plate. If this happens, a short may occur and the unit may be damaged.

• Always keep the metal contacts clean.

• Do not disassemble the unit.

• Do not apply mechanical shock or drop the unit.

• While the unit is in use, particularly during charging, keep it away from AM receivers

and video equipment because it will disturb AM reception and video operation.

• The unit becomes warm while in use. This is normal.

• Do not place the unit in locations that are:

– Extremely hot or cold

– Dusty or dirty

– Very humid

– Vibrating

No t e s o n d ry b a t t e rie s

To avoid possible damage from battery leakage or corrosion, observe the following.

• Be sure to insert the batteries in the correct direction.

• Dry batteries are not rechargeable.

• Do not use a combination of new and old batteries.

• Do not use different types of batteries.

• The batteries slowly discharge while not in use.

• Do not use a battery that is leaking.

If battery leakage occurred

• Wipe off the liquid in the battery case carefully before replacing the batteries.

• If you touch the liquid, wash it off with water.

• If the liquid get into your eyes, wash your eyes with a lot of water and then consult a

doctor.

If any difficulty should arise, unplug the unit and contact your nearest Sony dealer.

Download from Www.Somanuals.com. All Manuals Search And Download.

Usin g yo u r ca m co rd e r a b ro a d

Each country or area has its own electric and TV color systems. Before using your

camcorder abroad, check the following points.

Po w e r so u rce s

You can use your camcorder in any country or area with the supplied AC power

adaptor within 100 V to 240 V AC, 50/ 60 Hz.

Use a commercially available AC plug adaptor [a ], if necessary, depending on the

design of the wall outlet [b ].

AC-L10A/L10B/L10C

[a ]

[b ]

Diffe re n ce in co lo r syst e m s

This camcorder is an NTSC system based camcorder. If you want to view the playback

picture on a TV, it must be an NTSC system based TV.

Check the following list.

NTSC system

Bahama Islands, Bolivia, Canada, Central America, Chile, Colombia, Ecuador, Jamaica,

Japan, Korea, Mexico, Peru, Surinam, Taiwan, the Philippines, the U.S.A., Venezuela,

etc.

PAL system

Australia, Austria, Belgium, China, Czech Republic, Denmark, Finland, Germany, Great

Britain, Holland, Hong Kong, Italy, Kuwait, Malaysia, New Zealand, Norway, Portugal,

Singapore, Slovak Republic, Spain, Sweden, Switzerland, Thailand, etc.

PAL-M system

Brazil

PAL-N system

Argentina, Paraguay, Uruguay

SECAM system

Bulgaria, France, Guyana, Hungary, Iran, Iraq, Monaco, Poland, Russia, Ukraine, etc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Tro u b le ch e ck

If you run into any problem using the camcorder, use the following table to

troubleshoot the problem. Should the difficulty persist, disconnect the power source

and contact your Sony dealer or local authorized Sony service facility.

Ca m co rd e r

Pow er

Symptom

Cause and/or Corrective Actions

The power is not on.

• The battery pack is not installed.

m Install the battery pack. (p. 6)

• The battery is dead.

m Use a charged battery pack. (p. 7)

• The AC power adaptor is not connected to a wall outlet.

m Connect the AC power adaptor to a wall outlet. (p. 25)

The power goes off.

• While being operated in CAMERA mode, the camcorder

has been in Standby mode for more than 5 minutes.

m Turn STANDBY down once and then up again. (p. 11)

• The battery is dead.

m Use a charged battery pack. (p. 7)

The battery pack is quickly

discharged.

• The camcorder does not operate when using a battery

pack that is not an “InfoLITHIUM” battery pack.

m Use an “InfoLITHIUM” battery pack. (p. 66)

• The ambient temperature is too low. (p. 64)

• The battery pack has not been charged fully.

m Charge the battery pack again. (p. 7)

• The battery pack is completely dead, and cannot be

recharged.

m Use another battery pack. (p. 65)

While charging the battery pack, no

indicator appears or the indicator

flashes in the display window.

• The AC power adaptor is disconnected.

m Connect it firmly.

• Something is wrong with the battery pack.

m Contact your Sony dealer or local authorized Sony

service facility.

• The camcorder is working with the AC power adaptor.

m Use the battery pack.

The camcorder turns on/ off when

using the accessory which is attached

to the intelligent accessory shoe.

Operation

Symptom

Cause and/or Corrective Actions

START/ STOP does not operate.

• The tape is stuck to the drum.

m Eject the tape. (p. 10)

• The tape has run out.

m Rewind the tape or use a new one. (p. 21)

• The POWER switch is set to VTR.

m Set it to CAMERA. (p. 11)

• The tab on the cassette is out (red).

m Use a new tape or slide the tab. (p. 10)

(to be continued)

Download from Www.Somanuals.com. All Manuals Search And Download.

Tro u b le ch e ck

Symptom

Cause and/or Corrective Actions

• The START/ STOP MODE switch is set to 5SEC or

Recording stops in a few seconds.

m Set it to

. (p. 15)

The cassette cannot be removed from

the holder.

• The battery is dead.

m Use a charged battery pack or the AC power adaptor. (p.

7, 25)

{ and 6 indicators flash and no

function except for cassette ejection

works.

• Moisture condensation has occurred.

m Remove the cassette and leave the camcorder for at least

1 hour. (p. 67)

• You pressed DATE and TIME together for more than 2

seconds.

The date or time indicator is flashing.

m The camcorder is not malfunctioning. You may start

recording. Flashing will stop soon.

• The lithium battery is weak or dead.

m Replace the lithium battery with a new one. (p. 59)

The tape does not move when a

video control button is pressed.

• The POWER switch is set to CAMERA or OFF.

m Set it to VTR.

• The tape has run out.

m Rewind the tape or use a new one. (p. 21)

• STEADYSHOT is set to OFF.

m Set it to ON. (p. 54)

The Steady Shot function does not

activate.

• The Steady Shot function does not work when the wide

mode is set to 16:9 FULL.

The autofocusing function does not

work.

• FOCUS is set to MANUAL.

m Set it to AUTO. (p. 42)

• Shooting conditions are not suitable for autofocus.

m Set FOCUS to MANUAL to focus manually. (p. 42)

• The START/ STOP MODE switch is set to 5SEC or

m Set it to . (p. 15)

The fader function does not work.

No sound or only a low sound is

heard when playing back a tape.

• The stereo tape is played back with HiFi SOUND set to 1

or 2 in the menu system.

m Set to STEREO in the menu system. (p. 32)

Excessive high-pitched sound is

heard.

• The picture has been recorded with WIND set to ON in

the menu system.

m When there is no wind, set it to OFF. (p. 31)

• Reset the date and time. (p. 61)

The date or time indicator

disappears.

Picture

Symptom

Cause and/or Corrective Actions

The image on the viewfinder screen

is not clear.

• The viewfinder lens is not adjusted.

m Adjust the viewfinder lens. (p. 12)

Download from Www.Somanuals.com. All Manuals Search And Download.

Tro u b le ch e ck

Symptom

Cause and/or Corrective Actions

A vertical band appears when a

subject such as lights or a candle

flame is shot against a dark

background.

• The contrast between the subject and background is too

high. The camcorder is not malfunctioning.

m Change locations.

A vertical band appears when

shooting a very bright subject.

• The camcorder is not malfunctioning.

The playback picture is not clear.

• EDIT is set to ON in the menu system.

m Set it to OFF. (p. 32)

• The video heads may be dirty.

The picture is “noisy”.

m Clean the heads using the Sony V8-25CLH/ V8-25CLD

cleaning cassette (not supplied). (p. 68)

The picture does not appear in the

viewfinder.

• The LCD panel is open.

m Close the LCD panel. (p. 16)

An unknown picture is displayed in

the viewfinder or on the LCD screen.

• If 10 minutes elapse after you set the POWER switch to

CAMERA without inserting a cassette, the camcorder

automatically starts the demonstration or DEMO is set ON

in the menu system.

m Insert the cassette and the demonstration stops.

You can deactivate the demonstration. (p. 31)

The picture does not appear on the

LCD screen.

• Incorporated fluorescent tube is worn out.

m Please contact your nearest Sony dealer.

• The self-diagnosis function is activated.

The five digit code appears.

m Check the code and solve the problem. (p. 76)

Others

Symptom

Cause and/or Corrective Actions

The supplied Remote Commander

does not work.

• COMMANDER is set to OFF in the menu system.

m Set it to ON. (p. 30)

• Something is blocking the infrared rays.

m Remove the obstacle.

• The batteries are not inserted with the correct polarity.

m Insert the batteries with the correct polarity. (p. 84)

• The batteries are dead.

m Insert new ones. (p. 84)

• DISPLAY is set to V-OUT/ LCD in the menu system.

m Set it to LCD. (p. 30)

The picture from a TV or VCR does

not appear even when the camcorder

is connected to outputs on the TV or

VCR.

• Moisture condensation has occurred.

m Remove the cassette and leave the camcorder for at least

1 hour. (p. 67)

The beep sounds for 5 seconds.

• Some troubles occur in your camcorder.

m Remove the cassette and insert it again, then operate the

camcorder.

Picture is recorded in incorrect/

unnatural color.

• NIGHTSHOT is set to ON.

m Set it to OFF. (p. 36)

Download from Www.Somanuals.com. All Manuals Search And Download.

Se lf-d ia g n o sis d isp la y

The camcorder has a self-diagnosis display.

This function displays the camcorder’s condition

with five digits (a combination of a letter and

figures) in the viewfinder or on the LCD screen. If

this occurs, check the following code chart. The

five-digit display informs you of the camcorder’s

current condition. The last two digits (indicated

by ππ) will differ depending on the state of the

camcorder.

LCD scre e n

C:21:00

Self-diagnosis display

• C:ππ:ππ

You can service the camcorder

yourself.

• E:ππ:ππ

Contact your Sony dealer or local

autorized Sony facilitiy.

Five-digit display

Cause and/or Corrective Actions

• Moisture condensation has occurred.

C:21:ππ

m Remove the cassette and leave the camcorder for at least

1 hour. (p. 67)

• The video heads are dirty.

C:22:ππ

m Clean the heads using the Sony V8-25CLH/ V8-25CLD

cleaning cassette (not supplied). (p. 68)

• You are using a battery pack that is not an

“InfoLITHIUM” battery pack.

C:23:ππ

m Use an “InfoLITHIUM” battery pack. (p. 66)

C:31:ππ

C:32:ππ

• A servicable situation not malfunctioned above has

occurred.

m Remove the cassette and insert it again, then operate the

camcorder.

m Disconnect the power cord of the AC power adaptor or

remove the battery pack. After reconnecting the power

source, operate the camcorder.

E:61:ππ

E:62:ππ

• A camcorder malfunction which you cannot service has

occurred.

m Contact your Sony dealer or local authorized Sony

service facility and inform them of the five digits.

(example: E:61:10)

If you are unable to resolve the problem, contact your Sony dealer or local authorized

Sony service facility.

Download from Www.Somanuals.com. All Manuals Search And Download.

Sp e cifica t io n s

On-screen display

TN LCD/ TFT active matrix

method

Total dot number

3 inches:

Storage temperature

–4°F to +140°F (–20°C to +60°C)

Dimensions (Approx.)

CCD-TRV75/ TRV85/ TRV715/

TRV815:

Vid e o ca m e ra

re co rd e r

Syst e m

Video recording system

4 rotary heads

89, 622 (383 x 234)

3.5 inches:

105,380 (479 x 220)

4 1/ 2 x 4 3/ 8 x 8 1/ 2 in.

(114 x 111 x 214 mm) (w/ h/ d)

CCD-TRV93:

4 1/ 2 x 4 3/ 8 x 8 1/ 2 in.

(114 x 109 x 214 mm) (w/ h/ d)

Mass (Approx.)

CCD-TRV75/ TRV715: 2 lb 1 oz

(940 g)

CCD-TRV85/ TRV815: 2 lb 1 oz

(950 g)

(SP/ LP independent heads)

Helical scanning FM system

Audio recording system

Rotary heads, FM system

Video signal

NTSC color, EIA standards

Usable cassette

8mm video format cassette

Hi8 or standard 8

Recording / Playback time (using

120 min. cassette)

SP mode: 2 hours

LP mode: 4 hours

Fastforw ard/rew ind time (using

120 min. cassette)

In p u t a n d o u t p u t co n n e ct o rs

S video input/output

4-pin mini DIN

Luminance signal: 1 Vp-p, 75

ohms, unbalanced

Chrominance signal: 0.286 Vp-p,

75 ohms, unbalanced

Video input/output

Phono jack, 1 Vp-p, 75 ohms,

unbalanced

Audio input/output

Phono jacks (2: stereo L and R)

327 mV, (at output impedance

47 kilohms) impedance less than

2.2 kilohms

RFU DC OUT

Special minijack, DC 5V

Headphone jack

Stereo minijack (ø 3.5 mm)

LANC control jack

Stereo mini-minijack (ø 2.5 mm)

MIC jack

Minijack, 0.388 mV low impedance

with 2.5 to 3.0 V DC, output

impedance 6.8 kilohms (ø 3.5 mm)

Stereo type

Speaker

Dynamic speaker

Intelligent accessory shoe (CCD-

TRV75/TRV85/TRV715/TRV815

only)

CCD-TRV93: 2 lb (930 g)

excluding the battery pack, lithium

battery, cassette and shoulder

strap

2 lb 6 oz (1.1 kg)

including the battery pack NP-

F330, lithium battery CR2025,

cassette and shoulder strap

Microphone

Stereo type

Supplied accessories

See page 5.

Approx. 5 min.

Image device

CCD (Charge Coupled Device)

View finder

Electronic viewfinder

CCD-TRV75/ TRV85/ TRV715/

TRV815: Monochrome

CCD-TRV93:

Color 113, 578 (521 x 218)

Lens

Combined power zoom lens

Filter diameter 1 7/ 16 in. (37 mm)

18 x (Optical), 72 x (Digital)

Focal distance

3⁄16 - 8 in. (4.1 - 73.8 mm)

When converted to a 35 mm still

camera

1 7⁄8 - 33 1⁄2 in. (47.2 - 850 mm)

Color temperature

AC p o w e r a d a p t o r

Pow er requirements

100 - 240 V AC, 50/ 60 Hz

Pow er consumption

23 W

Output voltage

DC OUT: 8.4 V, 1.5 A in operating

mode

Operating temperature

32°F to 104°F (0°C to 40°C)

Storage temperature

–4°F to +140°F (–20°C to +60°C)

Dimensions (Approx.)

5 x 1 9/ 16 x 2 1/ 2 in. (125 x 39 x 62

mm) (w/ h/ d) excluding

projecting parts

8-pin connector

Auto

Minimum illumination

0.7 lux (F 1.4)

0 lux (in NightShot mode)*

* Object invisible for the dark can

be shot with infrared lighting.

Illumination range

0.7 lux to 100,000 lux

Recommended illumination

More than 100 lux

Ge n e ra l

Pow er requirements

7.2 V (battery pack)

Mass (Approx.)

9.8 oz (280 g) excluding power

cord

8.4 V (AC power adaptor)

Average pow er consumption

(w hen using the battery pack)

During camera recording using

LCD

Design and specifications are

subject to change without notice.

CCD-TRV75/ TRV93/ TRV715:

3.4 W

LCD scre e n

CCD-TRV85/ TRV815: 3.6 W

Viewfinder

CCD-TRV75/ TRV85/ TRV715/

TRV815: 2.7 W

CCD-TRV93: 2.6 W

Operating temperature

32°F to 104°F (0°C to 40°C)

Picture

CCD-TRV75/ TRV93/ TRV715:

3 inches measured diagonally

2 3/ 8 x 1 3/ 4 in (59.5 x 43.2 mm)

CCD-TRV85/ TRV815:

3.5 inches measured diagonally

2 7/ 8 x 2 in. (72.4 x 50.4 mm)

Download from Www.Somanuals.com. All Manuals Search And Download.

Id e n t ifyin g t h e p a rt s

!¡

!™

1 EDITSEARCH button (p. 20)

2 LASER LINK button (p. 56)

3 Lens cover

8 Pow er zoom lever (p. 14)

9 Lighting aperture (CCD-TRV93 only)

0 NIGHTSHOT sw itch (p. 36)

!¡ Display w indow (p. 85)

4 POWER sw itch (p. 11)

5 FOCUS sw itch (p. 42)

6 NEAR/FAR dial (p. 42)

!™ Tripod receptacle (p. 19)

Make sure that the length of the tripod

screw is less than 9/ 32 inch (6.5 mm)

otherwise, you cannot attach the tripod

securely and the screw may damage the

camcorder.

7 Video control buttons (p. 21)

p STOP (stop)

0 REW (rewind)

( PLAY (playback)

) FF (fastforward)

P PAUSE (pause)

r REC (recording)

Download from Www.Somanuals.com. All Manuals Search And Download.

Id e n t ifyin g t h e p a rt s

!£

@¡

@™

@£

@¢

@∞

@§

@¶

@•

!¢

!∞

!§

!¶

!•

!ª

@º

!£ View finder (p. 12)

!¢ Speaker (p. 22)

@™ View finder lens adjustment lever

(CCD-TRV93 only) (p. 12)

@£ BATT RELEASE lever (p. 6, 9)

@¢ Hook for shoulder strap (p. 84)

@∞ STANDBY sw itch (p. 11)

@§ START/STOP button (p. 11)

@¶ Battery mounting surface

@• DC IN jack (p. 7, 25)

!∞ LCD screen (p. 16)

!§ LCD BRIGHT buttons (p. 16)

!¶ OPEN button (p. 15)

!• VOLUME buttons (p. 21)

!ª Lithium battery compartment (p. 60)

@º Hook for shoulder strap (p. 84)

@¡ Eyecup

Download from Www.Somanuals.com. All Manuals Search And Download.

Id e n t ifyin g t h e p a rt s

@ª

#§

#¶

#•

#ª

$º

$¡

$™

#º

#¡

#™

#£

#¢

#∞

@ª COUNTER RESET button (p. 13)

#º TIME button (p. 50)

#¶ FADER button (p. 35)

#• BACK LIGHT button (p. 33)

#ª PROGRAM AE button (p. 40)

$º EXPOSURE button (p. 45)

$¡ Control dial (p. 28)

#¡ DATE button (p. 50)

#™ DISPLAY button (p. 22)

#£ TITLE button (p. 47)

#¢ END SEARCH button (p. 24)

#∞ PICTURE EFFECT button (p. 44)

#§ START/STOP MODE sw itch (p. 15)

$™ MENU button (p. 28)

Download from Www.Somanuals.com. All Manuals Search And Download.

Id e n t ifyin g t h e p a rt s

$ª

$£

$¢

$∞

$§

$¶

$•

%º

%¡

%™

%£

CCD-TRV75/TRV85/TRV715/TRV815

$¶ Grip strap (p. 18)

$£ Eyecup RELEASE knob (CCD-TRV75/

TRV85/ TRV715/ TRV815 only) (p. 69)

$• RFU DC OUT (RFU adaptor DC output)

jack (p. 55)

$¢ EJECT sw itch (p. 10)

$ª View finder lens adjustment ring

(CCD-TRV75/ TRV85/ TRV715/ TRV815

only) (p. 12)

$∞ LANC l control jack

l stands for Local Application Control

Bus System. The l control jack is used

for controlling the tape transport of

video equipment and peripherals

connected to it. This jack has the same

function as the jack indicated as

CONTROL L or REMOTE.

%º Intelligent accessory shoe (CCD-

TRV75/ TRV85/ TRV715/ TRV815 only)

%¡ S VIDEO jack (p. 55)

%™ VIDEO/AUDIO jacks (p. 55)

%£ 2 (headphones) jack (p. 22)

$§ Cassette compartment (p. 10)

Note on the intelligent accessory shoe

–CCD-TRV75/TRV85/TRV715/TRV815 only

Supplies power to optional accessories such as a video light or microphone. The intelligent

accessory shoe is linked to the STANDBY switch, allowing you to turn on and off the power

supplied by the shoe. Refer to the instruction manual of the accessory for further information. To

connect an accessory, press down and push it to the end, and then tighten the screw. To remove

an accessory, loosen the screw, and then press down and pull out the accessory.

If the camcorder does not work correctly with using the AC power adaptor, use the battery pack.

Download from Www.Somanuals.com. All Manuals Search And Download.

Id e n t ifyin g t h e p a rt s

%¢

%¶

%•

%ª

^º

%∞

%§

%¢ Built-in light (CCD-TRV93 only) (p. 52)

%• LASER LINK emitter (p. 56)/Nightshot

Light emitter (p. 36)

%∞ LIGHT sw itch (CCD-TRV93 only) (p. 52)

%ª Remote sensor (p. 83)

Aim the Remote Commander here for

remote control.

%§ MIC jack (PLUG IN POWER)

Connect an external microphone (not

supplied). This jack also accepts a

“plug-in-power” microphone.

^º Microphone

%¶ Camera recording/battery lamp (p. 11)

To w a t ch t h e d e m o n st ra t io n

You can start the demonstration by setting DEMO MODE in the menu system.

You can also start the demonstration by the following operation.

When NIGHTSHOT is set to ON, you cannot watch the demonstration.

To enter demo mode

(1) Eject the cassette and set the POWER switch to VTR.

(2) Turn STANDBY up to STANDBY.

(3) While holding down ( set the POWER switch to CAMERA.

To exit demo mode

(1) Set the POWER switch to VTR.

(2) Turn STANDBY up to STANDBY.

(3) While holding down p set the POWER switch to CAMERA.

Download from Www.Somanuals.com. All Manuals Search And Download.

Id e n t ifyin g t h e p a rt s

Re m o t e Co m m a n d e r

The buttons that have the same name on the Remote Commander as on the camcorder

function identically.

1 Transmitter

3 DISPLAY button (p. 22)

Point toward the remote sensor to

control the camcorder after turning on

the camcorder.

4 START/STOP button (p. 11)

5 Pow er zoom button (p. 14)

2 Video control buttons (p. 21)

Notes on the Remote Commander

• Keep the remote sensor away from strong light sources such as direct sunlight or

illumination. Otherwise, the remote control may not be effective.

• Be sure that there is no obstacle between the remote sensor on the camcorder and the

Remote Commander.

• This camcorder works in commander mode VTR 2. The commander modes (1, 2 and

3) are used to distinguish this camcorder from other Sony VCRs to avoid remote

control misoperation. If you use another Sony VCR in commander mode VTR 2, we

recommend you change the commander mode or cover the remote sensor of the VCR

with black paper.

Download from Www.Somanuals.com. All Manuals Search And Download.

Id e n t ifyin g t h e p a rt s

To p re p a re t h e Re m o t e Co m m a n d e r

Insert two size AA (R6) batteries by matching the + and – on the batteries to the

diagram inside the battery compartment.

Note on battery life

The batteries for the Remote Commander last about 6 months under normal operation.

When the batteries become weak or dead, the Remote Commander does not work.

To avoid damage from possible battery leakage

Remove the batteries when you will not use the Remote Commander for a long time.

At t a ch in g t h e sh o u ld e r st ra p

Attach the supplied shoulder strap to the hooks for the shoulder strap .

Download from Www.Somanuals.com. All Manuals Search And Download.

Id e n t ifyin g t h e p a rt s

Op e ra t io n in d ica t o rs

Vie w fin d e r

Disp la y w in d o w

!¢

@¡

0:00:00

STBY

!∞

!§

!¶

40min

@¢

END

M.FADER

CINEMA

SEPIA

!• @£

!ª

AUTO DATE

12:00:00AM

c^„

!¡

!™

!£

@º

@¡

@™

1 Recording mode indicator (p. 29)/

!¢ Video control mode (p. 11)

!∞ Tape counter (p. 13)/Self-diagnosis

Mirror mode indicator (p. 17)

2 Playing back or recording in Hi8

functions indicator (p. 76)/5SEC mode

format (p. 63)

indicator (p. 15)

3 Remaining battery time indicator

!§ Remaining tape indicator

5min

0min

4 Exposure indicator (p. 45)/Zoom

!¶ END SEARCH indicator (p. 20)

indicator (p. 14)

!• NIGHTSHOT indicator (p. 36)

5 FADER indicator (p. 35)

!ª AUTO DATE indicator (p. 11)/Date

6 Wide mode indicator (p. 38)

7 PICTURE EFFECT indicator (p. 44)

indicator (p. 50)

@º Time indicator (p. 50)

8 LCD BRIGHT indicator (p. 16)/VOLUME

@¡ Warning indicators (p. 86)

indicator (p. 21)

@™ Recording lamp (CCD-TRV75/ TRV85/

9 PROGRAM AE indicator (p. 39)

0 Backlight indicator (p. 33)

!¡ WIND indicator (p. 31)

TRV715/ TRV815 only) (p. 11)

@£ Date or time indicator (p. 50)/Tape

counter indicator (p. 13)/Self-diagnosis

functions indicator (p. 76)/Remaining

battery time indicator

!™ Steady Shot off indicator (p. 54)

!£ Manual focusing (p. 42)

@¢ FULL charge indicator (p. 7)

Download from Www.Somanuals.com. All Manuals Search And Download.

Wa rn in g in d ica t o rs

If indicators flash in the viewfinder or in the display window, check the following:

≥≥... :you can hear the beep sound when the BEEP is set to ON.

0min

5min

C:21:00

CLEANING

CASSETTE

C:31:10

JUL

1998

COPY

INHIBIT

1 The battery is w eak or dead.

Slow flashing: The battery is weak.

Fast flashing: The battery is dead.

7 The video heads may be

contaminated.

8 Some other trouble has occurred.

Use the self-diagnosis function (p.76).

If the display does not disappear contact

your Sony dealer or local authorized

Sony service facility.

2 The tape is near the end.

The flashing is slow.

3 The tape has run out.

The flashing becomes rapid.

9 The lithium battery is w eak or is not

installed.

4 No tape has been inserted.

0 You tried to record a picture that has

a copyright control signal.

(P. 58)

5 The tab on the tape is out (red).

6 Moisture condensation has occurred.

Download from Www.Somanuals.com. All Manuals Search And Download.

In d e x

A, B

I, J, K, L

Ajusting viewfinder .............. 12

AFM HiFi Sound .............. 32, 63

ANTI GROUND SHOOTING

............................................... 15

Auto focus ............................... 42

Backlight .................................. 33

Beep ......................................... 13

LANC ...................................... 81

LASER LINK .......................... 56

Lithium battery ...................... 59

Self-diagnosis function .......... 76

Shoulder strap ........................ 84

Skip scan ................................. 23

Standby mode ........................ 11

STEADY SHOT ...................... 54

M, N

Manual focus .......................... 42

Menu system .......................... 28

MIC (microphone) jack ......... 82

NIGHTSHOT .......................... 36

T, U, V

Tape counter ........................... 13

TBC ........................................... 32

Title ........................................... 47

Tripod mounting ................... 19

Trouble check ......................... 73

C, D

Camera recording .................. 11

Car battery .............................. 27

Charging battery ...................... 7

Cleaning video heads ............ 68

Clock set .................................. 61

Connection .............................. 55

COUNTER RESET ................. 13

DATE/ TIME .......................... 50

DEMO ............................... 31, 82

Digital zoom ........................... 14

DISPLAY ................................. 22

DNR .......................................... 32

O, P

ORC .......................................... 51

PICTURE EFFECT ................. 44

Playback pause ....................... 23

Power sources ........................ 25

Power zoom ............................ 14

PROGRAM AE ....................... 40

W, X, Y, Z

Watching on a TV ................... 55

WIDE mode ............................. 37

WIND ...................................... 31

WORLD TIME ......................... 62

Zoom ....................................... 14

Q, R

Rec review .............................. 20

Recording mode ...................... 29

Remote control jack (LANC)

............................................... 81

Rewind ..................................... 21

EDIT ......................................... 32

Editing ..................................... 57

EDITSEARCH ........................ 20

END SEARCH ........................ 24

Exposure .................................. 45

F, G, H

FADER .................................... 35

House current .......................... 25

Download from Www.Somanuals.com. All Manuals Search And Download.

Sony Corporation Printed in Japan

Download from Www.Somanuals.com. All Manuals Search And Download.

Sigma Computer Monitor AM 255 User Manual
Silvercrest Blender SSM 550 B1 User Manual
Sony DVD Player DAV DZ20 User Manual
Sony Video Game Console 4 199 233 12 User Manual
Soundstream Technologies Speaker System EXC4 User Manual
SPX Cooling Technologies Humidifier Atmospheric Heat Vaporization Systems User Manual
Star Manufacturing Griddle 524CHSD User Manual
StarTechcom Power Supply ATX12V22 User Manual
Sungale Digital Photo Frame CD705 User Manual
SUPER MICRO Computer Computer Hardware X7DBU User Manual