3-859-271-11(1)
Before operating the unit, please read this manual
thoroughly and retain it for future reference.
A
a
Transmitter
b
Receiver
Features
The IFV-TR1K is an AV cordless system which uses
infrared rays. Connect the transmitter to video
equipment such as a camcorder or video game, and the
receiver to a TV. You can enjoy playing back your video
tape on TV without connecting between the TV and
video equipment.
Light emitter
Light receiver
POWER ON/
OFF switch
DC IN 9V
Contents
Transmitter (1) (See fig. A-a)
Visual/Audio
output jacks
The transmitter emits infrared rays to the receiver.
Receiver (1) (See fig. A-b)
POWER ON/OFF
switch
AV Cordless System
The receiver receives infrared rays from the transmitter.
AC power adapters (2) (See fig. A-c)
These adapters supply house current to the receiver
and the transmitter.
AV connecting cord (1) (See fig. A-d)
Connecting the transmitter to video equipment such as
a camcorder or video game.
DC IN 9V jack
VOL control
PHONES jack
Visual/Audio
input jacks
Operating Instructions
Connecting the receiver to a TV (or a monitor).
Owner’s record
The model and serial numbers are located on the bottom. Record the serial
number in the space provided below.
Refer to these numbers whenever you call upon your Sony dealer regarding
this product.
c
AC power adapters
d
AV connecting cord
Preparations
Preparing the transmitter
Model No. IFV-TR1K
1 Connect the transmitter to video
equipment such as a camcorder or video
game with AV connecting cord.
(See fig.B–a)
Serial No.
× 2
2 Connect the supplied AC power adapter
to DC IN 9V of the transmitter.
(See fig.B–b)
B
3 Connect the supplied AC power adapter
to an AC outlet.
Transmitter
(rear side)
a
Preparing the receiver
1 Connect the receiver to a TV with the
supplied AV connecting cord.
(See fig.B–c)
2 Connect the supplied AC power adapter
to Audio
input
jack
to Visual
input
jack
to DC IN 9V of the receiver. (See fig.B–d)
Video game
3 Connect the supplied AC power adapter
to an AC outlet.
to Visual
output
The receiver can face up, down, left or
right, and the transmitter can face
upwards as needed.
(Red)
(White)
(Yellow)
IFV-TR1K
Sony Corporation © 1997 Printed in Japan
(Yellow)
AV connecting cord
: Signal flow
(See fig.B–e, f)
(Red)
If your TV or VCR is a monaural type
Connect the yellow plug for video and connect only the
white plug for audio on both the receiver and the TV or
VCR. With this connection, the sound is monaural.
(White)
Camcorder
to Audio
output
WARNING
b
To prevent fire or shock hazard, do
not expose the unit to rain or
moisture.
Transmitter
(rear side)
Notes
•To connect the receiver to an AC outlet, use only supplied
AC power adapter, because the polarity of the supplied
adapter is opposite of conventional adapters. Do not use
the supplied AC power adapter for other electric
appliances with a DC IN 9 V jack.
to AC outlet
For the customers in the U.S.A.
For the customers in Canada
This symbol is intended to alert the user to
the presence of important operating and
maintenance (servicing) instructions in the
literature accompanying the appliance.
CAUTION
AC power
TO PREVENT ELECTRIC SHOCK, DO NOT USE THIS
POLARIZED AC PLUG WITH AN EXTENSION
CORD, RECEPTACLE OR OTHER OUTLET UNLESS
THE BLADES CAN BE FULLY INSERTED TO
PREVENT BLADE EXPOSURE.
adapter
Polarity of the plug
to DC IN 9V jack
(supplied)
•To connect more than one appliance to the transmitter,
use an AV selector such as the SB-V30G, SB-V40, etc.
(optional).
WARNING
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful
interference in a residential installation. This
equipment generates, uses, and can radiate radio
frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there
is no guarantee that interference will not occur in a
particular installation. If this equipment does cause
harmful interference to radio or television reception,
which can be determined by turning the equipment off
and on, the user is encouraged to try to correct the
interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and
receiver.
Receiver
(rear side)
AC power cord plug
One blade of the plug is wider than the other for the
purpose of safety and will fit into the power outlet only
one way. If you are unable to insert the plug fully into
the outlet, contact your dealer.
c
to Audio
output
jack
to Visual
output
jack
to Visual
input
(Yellow)
TV
(Red) (White) (Yellow)
AV connecting
cord (supplied)
(Red)
(White)
Projector
: Signal flow
to Audio
input
– Connect the equipment into an outlet on a circuit
different from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV
technician for help.
Receiver
(rear side)
d
to AC outlet
You are cautioned that any changes or modifications
not expressly approved in this manual could void your
authority to operate this equipment.
AC power
adapter
to DC IN 9V jack
(supplied)
e
f
Top view
Side view
Transmitter
Transmitter
Receiver
Receiver
30°
30°
IFV-TR1K.3-859-271-11(1).E
Download from Www.Somanuals.com. All Manuals Search And Download.
|