Making Video Connections
mp
k, the color looks unusual, or the LAMP
he SXRD projection TV flashes, it is time
a new one (not supplied).
Programming the Remote Control
Best Video
4
Your TV includes
Connector type
Performance
several types of video
inputs. Use the inputs
that are available on
your components that
provide the best video
performance, as
HDMI
(High-Definition
Multimedia Interface)
The remote control is preset to operate Sony brand video equipment.
Sony Equipment
DVD/VCR
Programmable Code Number
751 (Sony DVD Player)
ent lamp (not supplied) for replacement. Use of any
SXRD projection TV.
ns off (about two minutes) and then unplug the power
ntinue to blow for about two minutes after turning the
completely before removing it. The surface of the lamp
least 30 minutes after the power has been turned off.
amp slot with a vacuum cleaner, after pulling out the
Component video
S VIDEO
SAT/Cable
i.LINK
801 (Sony Satellite Receiver)
901 (Sony DVD Player (i.LINK))
described in right.
Composite video
RF/Coaxial
If you have video equipment other than Sony brand that you want to
control with the SXRD projection TV’s remote control, use the
following procedures to program the remote control.
neath the Front Panel Cover and locate
e of the cover.
The equipment must have infrared (IR) remote capability in order to be used with this
remote control.
Quick Setup Guide
turning them counterclockwise and
Using the code list below, find the three-digit code number for the
manufacturer of your equipment. (If more than one code number is
listed, use the number listed first.)
2
5
1 Press FUNCTION repeatedly until the DVD/VCR,
1
SAT/CABLE or i.LINK indicator lights up.
STD/D
UO
POW
ER
2 Press SAT/CABLE for five seconds until the
indicator of the selected input flashes.
3
3 While the desired indicator is flashing, enter the
4
he lamp cover with a coin or similar
to the left. Put fingers on the right edge
t forward to remove the cover.
three-digit manufacturer’s code number.
4 Press ENTER.
5 To check if the code number works, aim the SXRD
projection TV’s remote control at the equipment
and press SAT/CABLE that corresponds with that
equipment. If it responds, you are done. If not, try
using another code listed for that manufacturer.
DIO IN
HD/D
(1080i/720
VIDEO IN
DIGITAL
AUDIO
1
3
4
(OPTICAL)
OUT
S
VIDEO
PCM/DOLBY DIGITAL
CABLE
If your product is not working properly
VIDEO
DO NOT RETURN TO THE STORE.
L
For service and technical assistance
Call our QUALIA Call Center at 1-877-782-5423 for US residents or
Customer Relations Center 1-877-899-SONY (7669) for Canadian residents.
(MONO)
i.LINK
AUDIO
R
is400
TS/DV/MICROMV/HDV
VHF/UHF
Sony Corporation © 2004 Printed in Japan
s that hold the lamp using the hex key
p, and then pull out the lamp.
2-590-305-12(1)
If more than one code number is listed, try entering them one by one until you come to
the correct code for your equipment.
If you enter a new code number, the code number you previously entered at that setting
is erased.
In some cases, you may not be able to operate your equipment with the supplied
remote control. In such cases, use the equipment’s own remote control unit.
Checking the
Supplied Accessories
Running Initial Setup
1
3
Along with your new SXRD projection TV, the packing box contains
a remote control, two AA (R6) batteries, cleaning cloth, etc. These
items are all you need to set up and use the TV.
1 Press POWER to turn on the TV.
Manufacturer Code
Manufacturer Code
Manufacturer’s codes
DVD Players
The Initial Setup screen appears.
Fisher
330, 335
Sylvania
Symphonic
Tashiro
Tatung
Teac
308, 309, 338, 310
glass of the new lamp is facing the left
place the lamp and tighten the screws.
Funai
338
338
General Electric
Go Video
Goldstar
329, 304, 309
322, 339, 340
332
332
Manufacturer Code
2 Press V/v to select the on-screen display language. Then press
314, 336, 337
314, 336, 338, 337
309, 308
312, 311
Sony
751
901
755
758
756
757
761
759
753
757
752
755
758
754
760
Sony (i.LINK)
General Electric
Hitachi
Connecting Your TV
.
2
Hitachi
306, 304, 305, 338
309, 308
Technics
Toshiba
Wards
Instant Replay
JC Penney
The message “Start auto program now?” appears.
309, 305, 304, 330,
314, 336, 337
327, 328, 335, 331,
332
JVC
Magnavox
Mitsubishi
Oritron
•Review the following chart to determine which diagram to use to
connect the components in your system:
Auto Program may take more than 50 minutes to complete. A progress bar will
display the approximate progress of the Auto Program and Digital Channels/Add
sequences.
JVC
314, 336, 337, 345,
346, 347
Yamaha
Zenith
314, 330, 336, 337
331
Kenwood
LG
314, 336, 332, 337
332
Panasonic
Philips
Cable Boxes
Manufacturer Code
For these components
See reverse side
LXI (SEARS)
332, 305, 330, 335,
338
Pioneer
3 Press V/v to select “Yes”, then press
.
pin on the back of the lamp cover goes
put the lamp cover back on. Slide the
the v/V marks match, and then tighten
DVD
RCA/PROSCAN
Samsung
Toshiba
Sony
230
Cable
Antenna
Magnavox
Marantz
Marta
308, 309, 310
314, 336, 337
332
VCR
Player
Hamlin/Regal
222, 223, 224, 225,
226
A
CableCARD
(optional)
Initial Setup automatically creates a list of receivable channels. When
finished, the lowest numbered channel is displayed.
Jerrold/G.I./Motorola 201, 202, 203, 204,
Zenith
Memorex
Minolta
Mitsubishi/MGA
Multitech
NEC
309, 335
205, 206, 207, 208,
218
305, 304
DVD
AV Receiver
Cable Box
or
Cable
Antenna
VCR
Player
323, 324, 325, 326
325, 338, 321
314, 336, 337
309, 308
Laserdisc Players
Oak
227, 228, 229
219, 220, 221
214, 215
Panasonic
Pioneer
B
C
D
E
F
Manufacturer Code
To run Auto Program again at a later time
Satellite Receiver
Sony
701
Olympic
Optimus
Orion
Scientific Atlanta
Tocom
209, 210, 211
216, 217
Panasonic
Pioneer
704, 710
702
Use the Auto Program feature as described in “Selecting Channel
Options” in the Owner’s Guide.
327
DVD
Cable
Cable
Antenna
Antenna
Satellite Receiver
Digital Recorder
Cable Box
VCR
Player
317
Zenith
212, 213
Panasonic
Pentax
308, 309, 306, 307
305, 304
VCRs
DVD
Player
HD Cable Box
AV Receiver
Satellite Receivers
Manufacturer Code
Manufacturer Code
To add individual digital channels
Philco
308, 309
or
Sony
301, 302, 303
Philips
308, 309, 310
308
HD Sat Receiver
Sony
801
Use the Digital Channel feature as described in “Selecting Channel
Options” in the Owner’s Guide.
Admiral (M. Ward)
Aiwa*
327
Pioneer
Dish Network
Echostar
810
338, 344
314, 337
319, 317
309, 308
332
Quasar
308, 309, 306
810
nel Cover securely and tighten the two
Audio Dynamic
Broksonic
Canon
RCA/PROSCAN
304, 305, 308, 309,
311, 312, 313, 310,
329
DVD
Cable
Cable
Antenna
Antenna
HD Cable Box
VCR
General Electric
Hitachi
802
Player
e cover.
805
Sony
Realistic
309, 330, 328, 335,
324, 338
Cable Box
Hughes
804
Citizen
VCR
Dream System
Mitsubishi
Panasonic
RCA/PROSCAN
Toshiba
809
Craig
302, 332
315
or
Sansui
Samsung
Sanyo
314
803
Criterion
Curtis Mathes
Daewoo
DBX
Satellite Receiver
322, 313, 321
330, 335
802, 808
806, 807
304, 338, 309
341, 312, 309
314, 336, 337
304
Scott
312, 313, 321, 335,
323, 324, 325, 326
•See the “Cables Required” chart that appears with the diagram to
determine which cables you’ll need. You may need to purchase
extra accessories, such as cables and splitters, depending on the
components you plan to connect.
* If an Aiwa VCR does not
work even though you enter
the code for Aiwa, enter the
code for Sony instead.
Dimensia
Emerson
Sharp
327, 328
STD/D
UO
POW
ER
319, 320, 316, 317,
318, 341
Signature 2000 (M.Ward) 338, 327
SV 2000 338
•Turn off and unplug all components before making connections.
•If you are connecting a digital cable box, you’ll need a special bi-
directional splitter that’s compatible with your cable box. Contact
your cable provider for details.
Download from Www.Somanuals.com. All Manuals Search And Download.
|