Bumper Kit
Mfg. No. 1694923
Installation
Instructions
Kit Contents:
3
Ref. Part No. Qty. Description
2
1
2
3
1731989A
1931277
1930591
1
4
4
Bumper Assembly
Nut, Hex, Flange Lock, 5/16-18
Capscrew, Flange Lock,
5/16-18 x 3/4
3
2
1
Figure 1. Contents
This kit is to install a bumper onto a Regent / 500 /
2500 / LT-200 Series Lawn Tractor.
A
A
WARNING
Before beginning any service work turn off the
PTO, set the parking brake, turn off the ignition,
and disconnect the spark plug wire(s).
B
Kit Installation
Figure 2. Head Light
A. Socket and Bulbs
B. Bezel
HOOD REMOVAL
1. Open the hood.
2. Remove the socket and bulbs (A, Figure 2) by twist-
ing the socket counterclockwise and pulling it out of
the bezel (B). Repeat on other side.
3. Rock the hood back slightly and lift hood and grill
assembly (B, Figure 3) off pivot posts (C). Set hood
on clean 4 x 4’s or workbench.
B
D
A
C
Figure 3. Hood Removal and Installation
A. Hinge Post
B. Hood and Grill Assembly
C. Pivot Post
D. Stop
1
Download from Www.Somanuals.com. All Manuals Search And Download.
|