LC-19DV28UT
LC-22DV28UT
COMBINATION LIQUID CRYSTAL TELEVISION
AND DVD/CD PLAYER
COMBINÉ TÉLÉVISEUR ACL ET LECTEUR DVD/CD
COMBINACION TELEVISOR CON PANTALLA DE
CRISTAL LÍQUIDO CON DVD/DISCOS COMPACTOS
OPERATION MANUAL
MODE D’EMPLOI
MANUAL DE OPERACIÓN
IMPORTANT
IMPORTANT
:
:
Please read this operation manual before starting operating the equipment.
Veuillez lire ce mode d'emploi avant de commencer à utiliser l'appareil.
IMPORTANTE : Lea este manual de operación antes de comenzar a operar el equipo.
Download from Www.Somanuals.com. All Manuals Search And Download.
LC-19DV28UT
LC-22DV28UT
COMBINATION LIQUID CRYSTAL TELEVISION
AND DVD/CD PLAYER
ENGLISH
OPERATION MANUAL
IMPORTANT:
Model No.:
Serial No.:
• To aid reporting in case of loss or theft, please record
the TV/DVD’s model and serial numbers in the space
provided.The numbers are located at the rear of the
TV/DVD.
Location of the required Marking
CLASS 1
LASER PRODUCT
The rating sheet and the safety caution are on
the rear of the unit.
CERTIFICATION: COMPLIES WITH FDA RADIATION PERFORMANCE STANDARDS, 21 CFR SUBCHAPTER J.
COMPLIES WITH FDA PERFORMANCE STANDARDS FOR LASER PRODUCTS EXCEPT FOR DEVIATIONS PURSUANT
TO LASER NOTICE NO. 50, DATED JUNE 24, 2007.
IMPORTANT INFORMATION
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO
NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.
The lightning flash with arrow-head
symbol, within an equilateral triangle,
is intended to alert the user to the
presence of uninsulated “dangerous
voltage” within the product’s
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
enclosure that may be of sufficient
magnitude to constitute a risk of
electric shock to persons.
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE
PERSONNEL.
The exclamation point within a
triangle is intended to alert the user
to the presence of important
operating and maintenance
(servicing) instructions in the
literature accompanying the product.
CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE SLOT, FULLY
INSERT.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT INFORMATION
WARNING: FCC Regulations state that any unauthorized changes or modifications to this equipment not expressly
approved by the manufacturer could void the user’s authority to operate this equipment.
CAUTION:
This product satisfies FCC regulations when shielded cables and connectors are used to connect the unit to other
equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded
cables and connectors for connections.
“Note to CATV system installer:This reminder is provided to call the CATV system installer’s attention to Article 820-40 of
the National Electrical Code that provides guidelines for proper grounding and, in particular, specifies that the cable ground
shall be connected to the grounding system of the building, as close to the point of cable entry as practical.”
This product utilizes tin-lead solder, and fluorescent lamp containing a small amount
of mercury. Disposal of these materials may be regulated due to environmental
considerations. For disposal or recycling information, please contact your local
DECLARATION OF CONFORMITY
SHARP COMBINATION LIQUID CRYSTAL TELEVISION AND DVD CD PLAYER, MODEL LC-19DV28UT/LC-22DV28UT.
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
RESPONSIBLE PARTY:
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07495-1163
TEL: 1-800-BE-SHARP
INFORMATION:
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment
generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation.
If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
License information
* This product incorporates copy protection technology that is protected by U.S. and other intellectual property rights. The
use of Rovi Corporation’s copy protection technology in the product must be authorized by Rovi Corporation. Reverse
engineering or disassembly is prohibited.
* Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby
Laboratories.
* DVD Logo is a trademark of DVD Format/Logo Licensing Corporation.
* This product is protected by certain intellectual property rights of Microsoft. Use or distribution of such technology
outside of this product is prohibited without a license from Microsoft.
* HDMI, the HDMI Logo, and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI
Licensing LLC in the United States and other countries.
* Manufactured under license under U.S. Patent #: 5,451,942 & other U.S. and worldwide patents issued & pending. DTS
and the Symbol are registered trademarks and DTS Digital Out and the DTS logos are trademarks of DTS, Inc. Product
includes software. © DTS, Inc. All Rights Reserved.
* Products that have earned the ENERGY STAR® are designed to protect the environment through superior energy
efficiency.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
DEAR SHARP CUSTOMER
Thank you for your purchase of the Sharp Combination Liquid Crystal Television and DVD/CD player.
To ensure safety and many years of trouble-free operation of your product, please read the Important
Safety Instructions carefully before using this product.
IMPORTANT SAFETY INSTRUCTIONS
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if
improperly handled. This product has been engineered and manufactured with the highest priority on safety. However,
improper use can result in electric shock and/or fire. In order to prevent potential danger, please observe the following
instructions when installing, operating and cleaning the product. To ensure your safety and prolong the service life of
your Liquid Crystal Television, please read the following precautions carefully before using the product.
1) Read these instructions.
2) Keep these instructions.
3) Heed all warnings.
4) Follow all instructions.
5) Do not use this apparatus near water.
6) Clean only with dry cloth.
7) Do not block any ventilation openings. Install in accordance with the manufacturer’s instructions.
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including
amplifiers) that produce heat.
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades with
one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide blade or
the third prong are provided for your safety. If the provided plug does not fit into your outlet, consult an electrician
for replacement of the obsolete outlet.
10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles, and the
point where they exit from the apparatus.
11) Only use attachments/accessories specified by the manufacturer.
12) Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the
apparatus. When a cart is used, use caution when moving the cart/apparatus combination to avoid
injury from tip-over.
13) Unplug this apparatus during lightning storms or when unused for long periods of time.
14) Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in
any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects have fallen into the
apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.
Additional Safety Information
15) Power Sources—This product should be operated only from the type of power source indicated on the marking
label. If you are not sure of the type of power supply to your home, consult your product dealer or local power
company. For products intended to operate from battery power, or other sources, refer to the operating
instructions.
16) Overloading—Do not overload wall outlets, extension cords, or integral convenience receptacles as this can
result in a risk of fire or electric shock.
17) Object and Liquid Entry—Never push objects of any kind into this product through openings as they may touch
dangerous voltage points or short-out parts that could result in a fire or electric shock. Never spill liquid of any
kind on the product.
18) Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to qualified service
personnel under the following conditions:
a) When the AC cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by following the operating instructions.
Adjust only those controls that are covered by the operating instructions as an improper adjustment of other
controls may result in damage and will often require extensive work by a qualified technician to restore the
product to its normal operation,
e) If the product has been dropped or damaged in any way, and
f) When the product exhibits a distinct change in performance - this indicates a need for service.
19) Replacement Parts—When replacement parts are required, be sure the service technician has used replacement
parts specified by the manufacturer or have the same characteristics as the original part. Unauthorized
substitutions may result in fire, electric shock, or other hazards.
20) Safety Check—Upon completion of any service or repairs to this product, ask the service technician to perform
safety checks to determine that the product is in proper operating condition.
21) Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product according
to the method recommended by the manufacturer.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
EXAMPLE OF ANTENNA GROUNDING AS PER NATIONAL
ELECTRICAL CODE, ANSI/NFPA 70
• Outdoor Antenna Grounding — If an outside antenna is
connected to the television equipment, be sure the antenna
system is grounded so as to provide some protection against
voltage surges and built-up static charges. Article 810 of the
National Electrical Code, ANSI/NFPA 70, provides information
with regard to proper grounding of the mast and supporting
structure, grounding of the lead-in wire to an antenna discharge
unit, size of grounding conductors, location of antenna-
discharge unit, connection to grounding electrodes, and
requirements for the grounding electrode.
ANTENNA LEAD
IN WIRE
GROUND
CLAMP
ANTENNA
DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
NEC — NATIONAL ELECTRICAL CODE
• Water and Moisture — Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or
laundry tub; in a wet basement; or near a swimming pool; and the like.
•
Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base can
cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart, stand,
tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product on a wall,
be sure to follow the manufacturer’s instructions. Use only the mounting hardware recommended by the manufacturer.
• Selecting the location — Select a place with no direct sunlight and good ventilation.
• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these
vents and openings since insufficient ventilation can cause overheating and/or shorten the life of the product. Do not
place the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product
is not designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack,
unless proper ventilation is provided or the manufacturer’s instructions are followed.
• The Liquid Crystal panel used in this product is made of glass. Therefore, it can break when the product is dropped or
applied with impact. Be careful not to be injured by broken glass pieces in case the panel breaks.
• Heat — The product should be situated away from heat sources such as radiators, heat registers, stoves, or other
products (including amplifiers) that produce heat.
• The Liquid Crystal panel is a very high technology product with 1,049,088 pixels, giving you fine picture details.
Occasionally, a few non-active pixels may appear on the screen as a fixed point of blue, green or red. Please note that
this does not affect the performance of your product.
• Lightning — For added protection for this television equipment during a lightning storm, or when it is left unattended
and unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent
damage to the equipment due to lightning and power-line surges.
•
Power Lines — An outside antenna system should not be located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,
extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.
• To prevent fire, never place any type of candle or flames on the top or near the TV set.
• To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items.
• Do not display a still picture for a long time, as this could cause an afterimage to remain.
• To prevent fire or shock hazard, do not expose this product to dripping or splashing.
No objects filled with liquids, such as vases, should be placed on the product.
• Do not insert foreign objects into the product. Inserting objects in the air vents or other
openings may result in fire or electric shock. Exercise special caution when using the product
around children.
• CONDENSATION — Moisture will form in the operating section of the player if the player
is brought from cool surroundings into a warm room or if the temperature of the room rises
suddenly. When this happens, player’s performance will be impaired. To prevent this, let the
player stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature
rises gradually. Condensation may also form during the summer if the player is exposed to the breeze from an air
conditioner. In such cases, change the location of the player.
•
DISC SLOT — Keep your fingers well clear of the disc slot as it is closing. Failure to do so may cause serious personal injury.
• LASER BEAM — Do not look into the opening of the disc slot or ventilation opening of the product to see the source of
the laser beam. Doing so may cause sight damage.
• DISC — Do not use a cracked, deformed, or repaired disc. These discs are easily broken and may cause serious
personal injury and product malfunction.
Precautions when transporting the TV
• When transporting the TV, never carry it by holding or otherwise putting pressure onto the display. Be sure to always
carry the TV by two people holding it with two hands — one hand on each side of the TV.
Caring for the Cabinet
• Use a soft cloth (cotton, flannel, etc.) and gently wipe the surface of the cabinet.
•
Using a chemical cloth (wet/dry sheet type cloth, etc.) may deform the components of the main unit cabinet or cause cracking.
• Wiping with a hard cloth or using strong force may scratch the surface of the cabinet.
• If the cabinet is very dirty, wipe with a soft cloth (cotton, flannel, etc.) soaked in neutral detergent diluted with water
and thoroughly wrung out, and then wipe with a soft dry cloth.
• The cabinet is primarily made of plastic. Avoid using benzene, thinner, and other solvents, as these may deform the
cabinet and cause the paint to peel off.
• Do not apply insecticides or other volatile liquids.
Also, do not allow the cabinet to remain in contact with rubber or vinyl products for a long period of time. Plasticizers
inside the plastic may cause the cabinet to deform and cause the paint to peel off.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
Caring for the Liquid Crystal panel
• Turn off the main power and unplug the AC cord from the wall outlet before handling.
• Gently wipe the surface of the display panel with a soft cloth (cotton, flannel, etc.).
To protect the display panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/
dry sheet type cloth, etc.). This may damage the surface of the display panel.
• Wiping with a hard cloth or using strong force may scratch the surface of the display panel.
• Use a soft damp cloth to gently wipe the display panel when it is really dirty.
(It may scratch the surface of the display panel when wiped strongly.)
• If the display panel is dusty, use an anti-static brush, which is commercially available, to clean it.
• To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved cleaning cloths are
available directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z-LCD-CLOTH-3) packs. Call 1-800-BE-SHARP
CHILD SAFETY
It Makes A Difference How and Where You Use Your Flat Panel Display
Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:
THE ISSUE
• The home theater entertainment experience is a growing trend and larger flat panel
displays are popular purchases. However, flat panel displays are not always supported on
the proper stands or installed according to the manufacturer’s recommendations.
• Flat panel displays that are inappropriately situated on dressers, bookcases, shelves,
desks, speakers, chests or carts may fall over and cause injury.
THIS MANUFACTURER CARES!
• The consumer electronics industry is committed to making home entertainment enjoyable
and safe.
TUNE INTO SAFETY
• One size does NOT fit all. Follow the manufacturer’s recommendations for the safe
installation and use of your flat panel display.
• Carefully read and understand all enclosed instructions for proper use of this product.
• Don’t allow children to climb on or play with furniture and television sets.
• Don’t place flat panel displays on furniture that can easily be used as steps, such as a
chest of drawers.
• Remember that children can become excited while watching a program, especially on
a “larger than life” flat panel display. Care should be taken to place or install the display
where it cannot be pushed, pulled over, or knocked down.
• Care should be taken to route all cords and cables connected to the flat panel display
so that they cannot be pulled or grabbed by curious children.
WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL
DISPLAY, ALWAYS:
• Use a mount that has been recommended by the display manufacturer and/or listed by
an independent laboratory (such as UL, CSA, ETL).
• Follow all instructions supplied by the display and wall mount manufacturers.
• If you have any doubts about your ability to safely install your flat panel display, contact
your retailer about professional installation.
• Make sure that the wall where you are mounting the display is appropriate. Some wall
mounts are not designed to be mounted to walls with steel studs or old cinder block
construction. If you are unsure, contact a professional installer.
• A minimum of two people are required for installation. Flat panel displays can be heavy.
Note: CEA is the preeminent trade association promoting growth in the $161 billion U.S.
consumer electronics industry. More than 2,200 companies enjoy the benefits of CEA
membership, including legislative advocacy, market research, technical training and
education, industry promotion and the fostering of business and strategic relationships.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc
■ Discs which can be played back
■ Discs which cannot be played back
In this unit, use only discs that meet the standard, such
as those bearing the below logo marks on the disc label
surface. If you use a non-standard disc, we cannot
guarantee playback. Even if such a disc can be played back,
we cannot guarantee the image or sound quality.
The DVD logo is a registered trademark.
The discs listed below cannot be played back in general.
Even if one of these can be played back, it may not be
played back correctly. If a disc is played back by mistake,
extensively loud sounds may blow the speakers or may
damage the hearing of those in hearing range. Do not
playback the discs listed below.
CDG, Photo-CD, CD-ROM, CD-TEXT, CD-EXTRA,
SACD, PD, DVD-ROM, SVCD, CVD, VCD, DVD-RAM,
DVD+R/RW, DVD audio, HD DVD, Blu-ray, etc.
Media type
Logo mark
DVD-Video
DVD-R/RW
The following DVD-Video discs may not be played back
on this unit:
• DVD-Video that do not have the region number “1” or
“ALL”.
(Video format only)
• Prohibited or business-use DVD-Video.
Audio CD*
CD-R/CD-RWs cannot be played back for the following
reasons.
• Compatibility of the disc and this unit.
• Compatibility of the disc and the recorder used.
• Unfinalised discs.
CD-R/CD-RW (CD-DA, MP3, WMA
or JPEG format)
Never use the following discs or accessories. It may
cause serious damage to the TV/DVD.
• Irregular shaped discs such as card shaped, heart shaped
• The ring protector or other disc accessories
• The 8 cm disc adapter
* This unit is designed to playback music Compact Discs
(CD) that conform to the CD standard. CDs that contain
(copy-restriction) signals to protect copyrights cannot be
played back.
• Stickered or papered discs
• Some CD-R/RWs and DVD-R/RW can not be played back
depending on the recording conditions.
• Discs with scotch tape, glue or other remains of labels
• 8 cm discs can be played without an adapter.
■ Title/Chapter/Track
A DVD-Video has large partitions called “Titles”, and smaller
partitions within them called “Chapters”.
Region management information
This unit is designed and manufactured to support the
region management information that is recorded on a DVD
disc. If the region number written on the DVD disc does not
correspond to the region number of this unit, this unit cannot
play that disc.
A audio CD has other partitions called “Tracks”.
A number is allotted to each partition and these numbers are
called “title numbers”, “chapter numbers” or “track numbers”.
DVD DISC
• The region number of this unit is “1”.
TITLE 1
CHAPTER 1
TITLE 2
• The unit will play DVD-Video discs marked with labels
containing “1” or “ALL”.
CHAPTER 2
CHAPTER 1
CHAPTER 2
CHAPTER 3
Example:
ALL
1
Audio CD
Operating DVD-Video
• Some operations of DVD-Video may be prohibited by the
manufacturer, or some operation methods or functions of
the DVD-Video may be different from the description in
this manual.
TRACK
1
TRACK
2
TRACK
3
TRACK
4
TRACK
5
• If you attempt an operation that is prohibited by either the
disc or the unit, “
” will
This operation can’t be performed
appear on the TV screen. For operations prohibited by the
disc, see the information that came with the disc.
• When the menu screen or the operation guide appears
during disc playback, follow the displayed information.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Disc
■ Title/Chapter/Track PC-created disc
■ Playing MP3 (MPEG-1 Audio Layer-3) files
• You may not be able to play discs recorded using a
personal computer or recorder for disc compatibilities,
scratches or marks on the disc, dirty lenses of the unit or
condensation and so on.
• This unit is compatible with audio files recorded with the
following sampling frequency: 32 kHz, 44.1 kHz and 48
kHz.
• Files with extensions .mp3 or .MP3 can be played.
• For the best quality of sound, 128 kbps or higher bit rate is
recommended.
• Discs recorded using a personal computer may not be
playable in this unit due to the setting of the application
software used to create the disc. In these particular
instances, check with the software publisher for more
detailed information.
■ Copy Control CD (CCCD)
This product is designed to conform to CD-DA (Compact
Disc Digital Audio). Any other discs than CD-DA are not
guaranteed with their operation and performance in this
product.
■ Playable files
• ISO 9660 Level 1 or 2 compliant.
Romeo and Joliet file systems are both compatible with
this player.
■ Handling discs
• DRM (Digital Rights Management) protected files will not
play in this player.
Removing the Disc from its case
Be sure to hold the edge of disc. Do not touch the surface of
the disc.
For detailed information, please see the instruction
manuals or help files that came with your PC and/or
software.
Pick up the disc gently from the case.
• Do not scratch the disc.
• File structure (may differ): Up to 299 folders on a disc; up
to 648 files within each folder
• Do not get dirt on the surface of the disc.
• Do not stick a label or adhesive tape on the disc.
• Do not drop or bend the disc.
• Folder and file names can be displayed as long as they
are typed in alphabets and numbers. If folder and file
names are other than alphabets and numbers, they may
be replaced and displayed like as “_”. Garbled characters
may also be displayed in this case.
■ Playing image files
JPEG files recorded in DVD-R/-RW and CD-R/-RW can be
played.
Storing discs
• Store the disc in the case to avoid any risk of scratches,
dirt or damage.
■ JPEG file compatibility
• Image files should be saved in JPEG format.
• Files recorded in Fuji Colour CD, Kodak Picture CD or
CD-R/-RW can be played.
• Do not leave the disc exposed to direct sunlight or in hot
or humid places.
• Compatible formats: Baseline JPEG and EXIF 2.2* still
image files up to a resolution of 3072 x 2048.
*File format used by digital still cameras.
Cleaning discs
Wipe the disc with a clean, dry cloth from the center outward
toward the edges.
• Files with extensions .jpg or .JPG can be played.
• Progressive JPEG formatted files do not work.
• It may take some more time to start to play larger files than
usual.
• Do not wipe the disc in a circular motion around the
center.
• Do not use liquid or aerosol cleaners.
• JPEG files with different aspect ratio may be displayed
with black bands (either vertical or horizontal).
■ Playing Audio files
WMA and MP3 files recoded in DVD-R/-RW, CD-R/-RW can
be played.
■ Windows Media Audio (WMA) compatibility
Note on copyright
• WMA is an acronym for Windows Media Audio and
refers to an audio compression technology developed by
Microsoft Corporation.
• Unauthorized recording of copyrighted television
programs, films, video cassettes and other materials may
infringe the rights of copyright owners and be contrary to
copyright laws.
• You can encode your files by using Windows Media
Player Ver.7, 7.1, Windows Media Player for Windows XP
or Windows Media Player 9 Series.
• When encoding your files, use only applications approved
by Microsoft Corporation. If you use non-approved
application, it may not work properly.
• This unit is compatible with audio files recorded with the
following sampling frequency: 32 kHz, 44.1 kHz and 48
kHz.
• It is not compatible with loss-less encoding.
• Files with extensions .wma or .WMA can be played.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Supplied accessories
Make sure the following accessories are provided with the product.
Remote control unit
(×1)
“AA” size battery (×2)
Page 10
AC cord (×1)
Page 9
Stand unit (×1) and
Screws (×3)
Page 8
Operation manual (×1)
Page 10
NOTE
• Always use the AC cord supplied with the TV/DVD.
QUICK REFERENCE
Attaching the stand
• Before attaching (or detaching) the stand, unplug the AC cord from the AC input terminal.
•
Before performing work spread cushioning over the base area to lay the TV/DVD on. This will prevent it from being damaged.
CAUTION
• Attach the stand in the correct direction.
•
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV/DVD falling over.
For protection, sheets are
covering the product. Please
remove these sheets before
use.
Confirm the 3 screws supplied with the TV/DVD.
3
1
Screws (X3)
NOTE
• To detach the stand, perform the step in reverse order.
Remove the covering sheet of the stand.
2
1
Insert the stand to the bottom of the TV/DVD.
2
Insert and tighten the 3 screws into the 3 holes on the
bottom of the stand.
Soft cushion
Screw
8
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK REFERENCE
QUICK INSTALLATION TIPS
Attach your antenna to the back of the TV/DVD.
(See page 14.)
1
2
Connect the AC plug for the TV/DVD into the wall outlet.
AC outlet
• Place the TV/DVD close to the AC outlet, and keep the
power plug within reach.
NOTE
• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT
TOUCH UN-INSULATED PARTS OF ANY CABLES
WITH THE AC CORD CONNECTED.
How to turn on the TV/DVD for the first time.
3
A) Press POWER on TV/DVD.
POWER
B) POWER indicator on the front of the TV/DVD lights
GREEN.
POWER indicator
NOTE
• Speaker cannot be detached from the TV/DVD.
• TV/DVD angle cannot be adjusted.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
QUICK REFERENCE
If the remote control fails to operate TV/DVD functions, replace the batteries in the remote control unit.
1 Open the battery cover.
2 Insert two “AA” size batteries
3 Close the battery cover.
(supplied with the product).
• Place the batteries with their terminals
corresponding to the (+) and (–)
indications in the battery compartment.
NOTE
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical
leakage in old batteries.
• Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can
cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove batteries from it.
17” (5 m)
30°
30°
Remote control
sensor
IMPORTANT:
The POWER indicator on the television should light GREEN indicating you have power to the TV/DVD.
If the POWER indicator on the television still does not light up, press POWER on the remote control to turn the
power on.
IMPORTANT:
IF THE UNIT DOES NOT POWER ON - UNPLUG THE TELEVISION FROM THE OUTLET AND REPEAT THE
INSTALLATION STEPS.
IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT US AT 1-800-BE-SHARP.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
54W0131B.indb 10
5/19/10 10:55:41 AM
Contents
IMPORTANT INFORMATION................................... 1
License information ................................................ 2
DEAR SHARP CUSTOMER ..................................... 3
IMPORTANT SAFETY INSTRUCTIONS.................. 3
Disc........................................................................... 6
Supplied accessories ............................................. 8
QUICK REFERENCE................................................ 8
Attaching the stand.............................................. 8
Contents................................................................. 11
Part names............................................................. 12
TV/DVD (Front).................................................. 12
TV/DVD (Left).................................................... 12
TV/DVD (Rear) .................................................. 12
Remote control unit............................................ 13
Preparation ............................................................ 14
Using the remote control unit............................. 14
Cautions regarding remote control unit.............. 14
Antennas ........................................................... 14
Using external equipment .................................... 15
Experiencing HD images ................................... 15
Types of Connection.......................................... 15
Displaying an External Equipment Image .......... 15
Connecting to External Equipment ..................... 16
Connecting a Blu-ray Disc/DVD Player or HD
Watching the DVD ................................................. 29
Preparation........................................................ 29
Turning on the power......................................... 29
Select the DVD mode ........................................ 29
Turning off the power......................................... 29
Playback procedure........................................... 29
Status display of DVD disc................................. 29
Special playback ............................................... 30
Zooming ............................................................ 30
Locating desired scene...................................... 30
A-B Repeat playback......................................... 30
Marking desired scenes..................................... 31
Changing angles................................................ 31
Changing soundtrack language......................... 31
Subtitles............................................................. 31
Using HOME MENU.......................................... 32
Play mode.......................................................... 32
Audio Settings menu.......................................... 33
Video Adjust menu ............................................ 34
Function setup....................................................... 34
Customizing The Function Settings ................... 34
Parental Control................................................. 36
Appendix................................................................ 37
Language Code List .......................................... 37
Country/Area Code List ..................................... 37
Troubleshooting................................................. 38
Troubleshooting-Error Message ........................ 38
Troubleshooting-PC mode................................. 38
Troubleshooting-DVD........................................ 39
Specifications .................................................... 40
Calling for Service................................................. 41
LIMITED WARRANTY ............................................ 41
Cable/Satellite Set-top Box.............................. 16
Connecting a VCR, Game Console, Camcorder or
Cable/Satellite Set-top Box.............................. 17
Connecting an Audio Amplifier .......................... 18
Connecting a PC................................................ 18
Displaying an image from a PC.......................... 19
PC compatibility chart........................................ 19
Watching TV........................................................... 20
Preparation........................................................ 20
Turning on the power......................................... 20
Auto Setup......................................................... 20
Select the TV mode ........................................... 20
Turning off the power......................................... 20
Changing channels............................................ 20
Auto Ch Memory................................................ 21
Skipping stored channel .................................... 21
Clear All............................................................. 21
Display the channel information......................... 21
Setting MTS/SAP stereo mode.......................... 21
Selecting the digital audio language .................. 22
View mode for 4:3 programs.............................. 22
View mode for HD programs.............................. 22
Labeling channels.............................................. 22
Closed captions and digital closed captions...... 23
Caption setup .................................................... 24
Password setting for parental control................. 24
How to enter the Lock menu.............................. 24
To clear the all V-Chip settings .......................... 24
Parental control (V-CHIP) .................................. 25
TV Parental Guidelines (TV Guidelines) ........... 25
Voluntary movie rating system (MPAA) ............. 25
Canadian rating systems ................................... 26
Canadian English ratings................................... 26
Canadian French ratings ................................... 26
How to temporarily release the V-Chip block..... 26
Other convenience functions............................... 27
Menu operation buttons..................................... 27
Quick guide for MENU operation ....................... 27
Dimensional drawings
• The dimensional drawings for the TV/DVD set are
shown on the inside back cover.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Part names
TV/DVD (Front)
TV/DVD (Left)
Disc slot
EJECT button
–
Volume (VOL+/ )/
◀/▶buttons
Channel /▲/▶PLAY button
Channel /▼/ꢀSTOP button
Remote control sensor
POWER indicator
MENU button
INPUT/ENTER button
POWER button
NOTE
• The buttons on the main unit have the same functions as
the same buttons on the remote control. Fundamentally,
this operation manual provides a description based on
operation using the remote control.
TV/DVD (Rear)
Listening with headphones
Plug the headphone mini-plug into the
headphone jack located on the back of the
main unit.
Adjust the sound volume using VOL +/–
on the remote control.
INPUT 3 terminal
DIGITAL AUDIO
OUTPUT
(COAXIAL)
terminal
INPUT 2 terminals
AC INPUT
ANT./CABLE in
INPUT 1 terminals
INPUT 4 terminals
NOTE
• The illustrations in this operation manual are for explanation purposes and may vary slightly from the actual operations.
• The examples used throughout this manual are based on the LC-19DV28UT model.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Part names
4
5
REV : Review playback. (See page 30.)
Remote control unit
SKIP ꢁ/ꢂ: Skip chapter to reverse or forward direction.
(See page 30.)
6
7
STILL/PAUSE: Still picture of DVD / Pause CD sound.
14 15 16
(See page 30.)
SETUP/TV MENU: TV mode - Display menu of TV /
DVD mode - Call up initial setup mode. (See pages 27,
34.)
1
17
18
19
8
9
▲/▼/◀/▶/ENTER: Select a desired item on the screen.
SLOW
/
: Reverse/Forward -slow motion. (See
page 30.)
EXIT/CANCEL: Turn off the menu screen / Reset
20
information in the menu.
2
3
4
5
10 PLAY MODE: Select playback mode. (See page 32.)
11 AUDIO: Switch the sound of TV / Change sound track
21
22
23
24
25
language. (See pages 21, 31.)
12 RETURN: Turn off the DVD setup menu screen.
13 A-B REPEAT: Repeat playback between A and B. (See
page 30.)
6
14 DISPLAY: Display the current channel (or input source)
information on the screen. (See pages 21, 29.)
7
8
26
15 TV/DVD: Switch between TV/AV and DVD. (See pages
20, 29.)
16 EJECT: Eject the disc. (See page 29.)
9
17 SLEEP: Allows you to set a time when the TV/DVD
automatically switches to standby. Each time you press
this button, the remaining time setting switches by 10
minutes up to 2 hours. This display will disappear after
a few seconds, and the sleep timer automatically starts
counting down.
27
28
29
30
31
10
11
12
13
• If you want to adjust the sleep timer again, you can
press this button repeatedly then change the time
setting.
• Select “Off” by pressing SLEEP repeatedly to cancel
the sleep timer.
• The TV/DVD will enter the standby mode when the
remaining time reaches zero.
18 INPUT: Select input source. (See page 15.)
19 VIEW MODE: Select the screen size. (See page 22.)
NOTE
20 VOL +/–: Set the volume.
• When using the remote control unit, point it at the TV/DVD.
(See page 10.)
• To increase the volume, press VOL+.
• To decrease the volume, press VOL–.
21 CH
/
: Select the channel. (See page 20.)
There is a protective film covering the face of the remote
control. Please remove this film before use.
22 MUTE: Mute the sound. “Mute” will be displayed on the
screen, and the sound is silenced. The muting feature
can be released by pressing this button again or one of
VOL +/–.
• Sound via the COAXIAL DIGITAL AUDIO OUTPUT
terminal is not muted.
23 FWD: Fast forward playback. (See page 30.)
24 PLAY: Playback. (See page 29.)
25 STOP: Stop. (See page 29.)
26 DVD MENU: Display DVD menu.
• Press ▲/▼/◀/▶ to select desired title.
27 TOP MENU: Display title menu.
• Press ▲/▼/◀/▶ to select desired title.
28 ANGLE: Change the view angle. (See page 31.)
29 ZOOM: Zoom. (See page 30.)
30 DIRECT SKIP: Locating desired scene. (See page 30.)
31 MARKER: Index. (See page 31.)
1
POWER: Switch the power on or enters standby mode.
(See page 20.)
2
3
0–9: Set the channel. (See page 20.)
• (DOT) / SUBTITLE: To select 4-digit channel number.
(See page 20.) / Set subtitle. (See page 31.)
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Using the remote control unit
Use the remote control unit by pointing it towards the remote control sensor on
the TV/DVD. Objects between the remote control unit and the remote control
sensor may prevent proper operation.
Cautions regarding remote control unit
• Do not expose the remote control unit to shock.
In addition, do not expose the remote control unit to liquids, and do not place in an area
with high humidity.
• Do not install or place the remote control unit under direct sunlight. The heat may cause
deformation of the remote control unit.
• The remote control unit may not work properly if the remote control sensor on the TV/DVD
is under direct sunlight or strong lighting. In such cases, change the angle of the lighting or
the TV/DVD, or operate the remote control unit closer to the remote control sensor.
Antennas
To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of
connections that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an
F-type connector, plug it into the antenna terminal at the rear of the TV set.
1. A 75-ohm system is generally a round cable with F-type
connector that can easily be attached to a terminal
without tools (Commercially available).
F-type connector should be
fingertightened only.
NOTICE
When connecting the RF cable to the TV set, do not tighten
F-type connector
F-type connector with tools.
If tools are used, it may cause damage to your TV set. (The
breaking of internal circuit, etc.)
75-ohm coaxial cable (round)
2. A 300-ohm system is a flat “twin-lead” cable that can be
attached to a 75-ohm terminal through a 300/75-ohm
adapter (Commercially available).
F-type connector
300-ohm twin-lead cable (flat)
75-ohm coaxial cable
Connecting Antenna Cable
Home Antenna
• Connect the antenna cable to the
TV using one of the methods in the
terminal (75-ohm)
①
Cable without a
CATV converter
Cable TV lead-In
① ② ③
④
or ).
illustration as shown (
,
,
Coaxial cable
(commercially available)
②
VHF/UHF antenna
Home Antenna
terminal (75-ohm)
75-ohm coaxial cable (round)
Coaxial cable
(commercially available)
③
Combination VHF/
UHF antenna
or
75-ohm coaxial cable (round)
300-ohm twin-lead cable (flat)
UHF
300/75-ohm adapter
VHF
(commercially available)
ANTENNA ANTENNA
④
Separate VHF/
UHF antenna
300-ohm
twin-lead cable
300-ohm twin-lead cable
75-ohm coaxial cable
Combiner
(commercially
available)
IN OUT
To TV antenna terminal
or
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Using external equipment
Experiencing HD images
An HDTV without an HD source is just an ordinary TV/DVD.
To enjoy HD images on the TV/DVD, you should get HD programming from the following:
• Over-the-air broadcasting via HD quality antenna
• HD cable/satellite subscription
• HD compatible external equipment
NOTE
• For information on updating to HD programming, ask your cable/satellite service provider.
Types of Connection
Image quality differs depending on the terminal used.To enjoy clearer images, check the output terminals of your external
equipment and use its appropriate terminals for higher quality images.
• The illustrations of the terminals are for explanation purposes and may vary slightly from the actual products.
Image
Terminal on external
equipment
Cable
Terminal on the TV
Quality
HD
HDMI-certified cable
⇒Page 16
Quality
DVI-HDMI conversion cable
DVI OUT
AUDIO
⇒Page 16
Ø 3.5 mm stereo minijack cable
Component video cable
Audio cable
⇒ Page 17
S-VIDEO cable
Audio cable
⇒ Page 17
AV cable
⇒ Page 17
Standard
Quality
Displaying an External Equipment Image
To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV/DVD.
NOTE
• For information on updating to HD programming, ask your cable/satellite service provider.
1
2
Press INPUT.
• A list of selectable sources appears.
Press 0-5 to select the input source.
• Each time INPUT is pressed, the input source toggles.
TV
Input1
Input2
DVD
Input3
• You can also select the input source by pressing ▲/▼.
• An image from the selected source automatically displays.
Input Select
0. TV
1. Input1
2. Input2
3. Input3
4. Input4
5. DVD
[0-5]:Select
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to External Equipment
You can connect many types of external equipment to your TV/DVD. To view external source images, select the
input source from INPUT on the remote control unit or on the TV/DVD. (See page 15.)
For connecting the TV/DVD to external equipment, use commercially available cables.
CAUTION
• To protect equipment, always turn off the TV/DVD before connecting any external equipment.
• Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.
Connecting a Blu-ray Disc/DVD Player or HD Cable/Satellite Set-top Box
■ When using HDMI cable (INPUT 3):
The HDMI (High Definition Multimedia Interface) terminal is an audio-video interface that enables a connection for audio and
video signals using a single cable.The HDMI terminal supports high-resolution video input.
• Blu-ray disc player
• DVD player
• HD cable/satellite set-top box
Rear of the TV
HDMI-certified cable
HDMI OUT
NOTE
• Supported Audio format: Linear PCM (sampling rate 32/44.1/48kHz) and Dolby Digital.
• Digital Audio output is not available when using an HDMI input.
■ When using DVI-HDMI conversion cable (INPUT 3):
• Blu-ray disc player
• DVD player
• HD cable/satellite set-top box
Ø 3.5 mm stereo minijack cable
Rear of the TV
DVI-HDMI conversion cable
DVI OUT
AUDIO
NOTE
• When using an DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to
connecting an DVI-HDMI conversion cable to the INPUT 3 (HDMI) terminal, connect an audio cable to the AUDIO PC/HDMI
terminal and set “HDMI Audio” to “DVI”. (See page 28.)
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to External Equipment
■ When using Component cable (INPUT 2):
• Blu-ray disc player
• DVD player
• HD cable/satellite set-top box
Component video cable
Rear of the TV
PB
(Blue)
P
R
(Red)
Y (Green)
COMPONENT OUT
AUDIO-L (White)
AUDIO-R (Red)
Audio cable
NOTE
• See page 16 for connecting a Blu-ray disc player, DVD player or an HD cable/satellite set-top box to the HDMI terminal.
Connecting a VCR, Game Console, Camcorder or Cable/Satellite Set-top Box
■ When using S-VIDEO cable (INPUT 1):
• Game Console
• Camcoder
• VCR
S-VIDEO cable
Rear of the TV
AUDIO-R (Red)
AUDIO-L (White)
AUDIO-L (White)
AUDIO-R (Red)
Audio cable
■ When using Composite cable (INPUT 1):
• Game console
• VCR
• Camcorder
• Cable/Satellite set-top box
AV cable
Rear of the TV
VIDEO (Yellow)
AUDIO-L (White)
AUDIO-R (Red)
NOTE
• The S-VIDEO terminals take priority over the Video terminals.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to External Equipment
Connecting an Audio Amplifier
■ When using coaxial cable:
It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal.
Coaxial cable
Rear of the TV
COAXIAL
DIGITAL AUDIO INPUT
Connecting a PC
■ When using HDMI cable (INPUT 3):
Rear of the TV
HDMI-certified cable
HDMI OUT
NOTE
• Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certified cable to
the INPUT 3 (HDMI) terminal.
• The HDMI terminals only support digital signal.
■ When using DVI-HDMI conversion cable (INPUT 3):
Rear of the TV
DVI-HDMI conversion cable
DVI OUT AUDIO
Ø 3.5 mm stereo minijack cable
NOTE
• When using an DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to
connecting an DVI-HDMI conversion cable to the INPUT 3 (HDMI) terminal, connect an audio cable to the AUDIO PC/HDMI
terminal and set “HDMI Audio” to “DVI”. (See page 28.)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting to External Equipment
■ When using analog RGB cable (INPUT 4):
Rear of the TV
Analog RGB cable
(D-sub 15pin cable
or VGA cable)
RGB
AUDIO
Ø 3.5 mm stereo minijack cable
NOTE
• When using an analog RGB cable, input the audio signal to the AUDIO PC/HDMI terminal of INPUT 4.
Displaying an image from a PC
To view an image from a PC, perform the following procedure.
①
②
③
Select the Input 4 (PC) mode using INPUT on the remote control or the TV/DVD set. (See page 15.)
Select the PC input signal.
Adjust the “Picture” items if the PC image does not come in clearly. (See page 28.)
PC compatibility chart
Horizontal
Frequency
Vertical
VESA
PC
Resolution
720 x 400
Frequency
Standard
31.5 kHz
31.5 kHz
37.9 kHz
37.5 kHz
35.1 kHz
37.9 kHz
48.1 kHz
46.9 kHz
48.4 kHz
56.5 kHz
60.0 kHz
47.8 kHz
47.7 kHz
70 Hz
60 Hz
72 Hz
75 Hz
56 Hz
60 Hz
72 Hz
75 Hz
60 Hz
70 Hz
75 Hz
60 Hz
60 Hz
-
○
○
○
○
○
○
○
○
○
○
○
○
VGA
640 x 480
800 x 600
1,024 x 768
SVGA
PC
XGA
1,280 x 768
1,360 x 768
WXGA
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
Preparation
Select the TV mode
Press TV/DVD to select the TV mode.
Perform the following steps before you press POWER
on the remote control unit.
Turning off the power
1
2
3
Insert the batteries into the remote control unit.
(See page 10.)
Press POWER on the TV/DVD, or POWER on the
Connect the antenna cable to the TV/DVD. (See
page 14.)
Plug in the AC cord to the AC outlet. (See page 9.)
remote control.
• The TV/DVD enters standby mode and the image on the
screen disappears.
• The POWER indicator on the TV/DVD changes to Red.
NOTE
Turning on the power
• If you are not going to use this TV/DVD for a long period
of time, be sure to remove the AC cord from the power
outlet.
Press POWER on the TV/DVD, or POWER on the
remote control.
• Weak electric power is still consumed even when the
power is turned off.
TV status indicator (POWER)
ON
Lighting (Green)
Lighting (Red)
Changing channels
OFF/Standby
You can change channels in several ways.
• POWER indicator (Green): The TV/DVD is on. (“Please
wait” will appear for a few seconds on the screen.)
Method 1
Using CH
/
on the remote control unit or on the
TV/DVD.
Auto Setup
NOTE
The Auto Setup menu appears the first time you turn
on the TV/DVD, and assists you to select the menu
language, specify the Air/Cable setting, and program
your channels automatically.
• If your cable-TV system includes analog and digital
channels using the same channel number, your channel
up function will scroll through the analog channel first,
then the digital channel. Although it may appear as though
the channel does not change, it actually moves from the
analog to the digital channel in sequence.
IMPORTANT: Make sure that the antenna or cable TV
system connection is made!
If you use channel-down, it will move in reverse, from the
digital channel to the analog channel.
The turn on the TV/DVD, press POWER (POWER
indicator on the front of the unit changes green. It may
take approx. 10 seconds for a picture to appear on
screen.).
1
Method 2
Using remote control buttons 0–9, • (DOT) to select
channels for VHF/UHF/CATV/DIGITAL, then press
ENTER.
The “Auto Setup” function begins. Press ◀/▶ to select
2
3
your desired language.
Press ▲/▼ to select “Signal Type”, then press ◀/▶ to
select “Cable” or “Air”.
To select a 1 or 2-digit channel number (e. g., Channel 5):
Air:
VHF/UHF channels
Press 5
Cable: CABLE TV channels
NOTE
Press ▲/▼ to select “Automatic Search”, then press ▶ or
4
5
ENTER.
• When selecting a 1-digit channel number, it is not
necessary to press 0 before the number.
The TV will begin memorizing all the channels available
in your area.
• When you enter 0–9 only, channel selection will be made
if there is no operation within a few seconds.
• It may take from 15 minutes to 30 minutes to complete
memorizing digital cable channels.
To select a 3-digit channel number (e. g., Channel 115):
Press 1g1g5
Depending on the reception condition, a bar display may
not advance for several minutes, please be patient.
To select a 4-digit channel number (e. g., Channel 22.1):
NOTE
Press 2g2g • (DOT) g1
• If you press ENTER in the process of “Auto Setup”, the
Auto Setup stops and changes to the normal screen.
• When you make a menu selection, your changes occur
immediately.You do not have to press EXIT to see your
changes.
NOTE
• When you enter 0–9 only, channel selection will be made
if there is no operation within a few seconds.
• If you press 0 by itself in “Air” reception, nothing will
happen.
• Complete the above steps within a few seconds.
• When you enter 0–9 and • (DOT), channel selection will
be made if there is no operation within a few seconds.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
Display the channel information
Auto Ch Memory
Press DISPLAY to display the current channel (or
Auto Ch Memory makes the TV/DVD look for all
input source) information on the screen.
channels viewable in the set area.
When the TV receives a digital signal, the digital
information will appear for a few seconds.
1
2
Press TV MENU and the MENU screen displays.
Press ▲/▼ to select “Channel”, then press ▶ or ENTER.
Press ▲/▼ to select “Auto Ch Memory”, then press ▶ or
ENTER.
• Channel number
• Station name
• Channel label (if preset) • Broadcast program name
• V-Chip rating
• Sleep timer
• Program guide
• Resolution
• Signal type
• Audio language
• Picture size
3
4
5
Press ▲/▼ to select “Signal Type”, then press ◀/▶ to
select “Cable” or “Air”.
Press ▲/▼ to select “Automatic Search”, then press ▶ or
When the TV receives an analog signal, the analog
information will appear.
ENTER.
The TV will begin memorizing all the channels available
in your area.
• Channel number • Channel label (if preset)
• V-Chip rating
• Sleep timer
• Picture size
• Signal type
• It may take from 15 minutes to 30 minutes to complete
memorizing digital cable channels.
•
Audio information (Stereo, SAP or Mono)
• Resolution
Depending on the reception condition, a bar display
may not advance for several minutes, please be
patient.
• Broadcast program name
Setting MTS/SAP stereo mode
NOTE
• Memorizing channels is best accomplished during
evening “PRIMETIME” hours, as more stations are
broadcasting digital signals. Memorizing channels can
only be accomplished while a station is broadcasting a
digital signal to set that channel into memory.
• New digital channels may be added to your area
periodically, it is recommended to perform the “Automatic
Search” procedure regularly.
The TV/DVD has a feature that allows reception of
sound other than the main audio for the program.
This feature is called Multi-channel Television Sound
(MTS). The TV/DVD with MTS can receive mono
sound, stereo sound and Secondary Audio Programs
(SAP). The SAP feature allows a TV/DVD station to
broadcast other information, which could be audio in
another language or something completely different
like weather information.
Skipping stored channel
You can set channel selection disabled using CH
/
.
You can enjoy Hi-Fi stereo sound or SAP
broadcasts where available.
1
2
3
Press TV MENU and the MENU screen displays.
Press ▲/▼ to select “Channel”, then press ▶ or ENTER.
• Stereo broadcasts
View programs like live sporting events, shows and
concerts in dynamic stereo sound.
Press ▲/▼ to select “Add/Delete”, then press ▶ or
• SAP broadcasts
ENTER.
Receive TV broadcasts in either MAIN or SAP sound.
MAIN sound: The normal program soundtrack (either in
mono or stereo).
4
Press ▲/▼ to select “Add/Delete”, then press ▶ or
ENTER.
SAP sound: Listen to a second language, supplementary
commentary or other information. (SAP is mono sound.)
5
6
7
Press ▲/▼ to select the channel that you want to skip.
Press ◀/▶ to select “Delete” for selected channel.
Press EXIT to return to the normal screen.
If stereo sound is difficult to hear.
• Obtain a clearer sound by manually switching to fixed
mono-sound mode.
NOTE
• To add a digital channel you are watching:
Select a channel you want to add. Then select “Adding
Channel” in step 4, press ▶ or ENTER.
• To release the skipping channel:
Select “Add” in step 6.
NOTE
• MTS only operates while in TV mode.
• MTS is available only when receiving analog
broadcasting, not when receiving digital broadcasting.
• When the TV receives a stereo or SAP broadcast, the
word “Stereo” or “SAP” displays on-screen if you press
DISPLAY.
Clear All
All channels are deleted from the channel memory.
Changing MTS
You can change MTS as shown below to match the
television broadcast signal.
1
2
3
Press TV MENU and the MENU screen displays.
Press ▲/▼ to select “Channel”, then press ▶ or ENTER.
1
2
3
In analog TV mode, press AUDIO and the “Audio”
Press ▲/▼ to select “Add/Delete”, then press ▶ or
menu screen displays. “MTS” will be highlighted.
ENTER.
Press AUDIO again or ◀/▶ to select “Stereo”,
4
5
Press ▲/▼ to select “Clear All”, then press ▶ or ENTER.
Press EXIT to return to the normal screen.
“SAP” or “Mono”.
Press EXIT to return to the normal screen.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
Selecting the digital audio language
View mode for HD programs
When two or more audio languages are included in a
Stretch mode is available for HD programs.
Suitable for viewing wide-screen 1.78:1 aspect-ratio
programs. When viewing 1.85:1 programs, the stretch
mode will still show very thin black bands at the top
and bottom of the screen.
digital signal, you can select one of the audio languages.
1
In digital TV mode, press AUDIO and the “Audio
Language” menu screen displays.
2
3
Press ▲/▼ or 0-6 to select your desired language.
Press EXIT to return to the normal screen.
Labeling channels
To create channel labels
NOTE
• Digital audio is active only when receiving digital
1
2
Select a channel you want to label.
boardcasting, not when receiving analog boardcasting.
Press TV MENU, then press ▲/▼ to select
“Channel”, then press ▶ or ENTER.
View mode for 4:3 programs
Press ▲/▼ to select “Ch Label”, then press ▶ or
ENTER. The Ch Label menu will appear.
1
Press VIEW MODE.
• The View mode menu displays.
3
4
Press ◀/▶ to select a channel you want to label,
• The menu lists the view mode options selectable for
then press ▼.
the type of video signal currently being received.
Ch Label
2
Press 0–3 to select each view mode directly while
the View mode menu is still on the screen.
• Each time VIEW MODE is pressed, View Mode item
toggles.
Channel Number
15.1
Ch Label
ABC
Label Clear
>>
• You can also select View Mode item by pressing ▲/▼.
• You can sequentially select a view mode that has its
own aspect ratio.
: Select
: Adjust ENTER : Set
Press ◀/▶ repeatedly until the character you want
appears in the first space.
Side Bar:
Suitable for viewing conventional
4:3 programs in their normal
format.
The characters rotation as follows:
, () @ / + =
-
-
SPACE
S.Stretch (Smart stretch):
Suitable for stretching 4:3
programs to fill the screen.
If the character which you desire appears, press
ENTER. Repeat this step to enter the rest of the
characters.
When you finish inputting the label name, press
ENTER.
Zoom:
Suitable for viewing wide-screen
2.35:1 anamorphic DVDs in full
screen.
5
6
Press EXIT to return to the normal screen.
Repeat steps 1-5 for other channels. You can
assign a label to each channel.
Stretch:
To erase channel labels
This mode is useful for 1.78:1 DVDs.
When viewing 1.85:1 DVDs,
stretch mode will still show very
thin black bands at the top and
bottom of the screen.
1
Select a channel with a label which you want to
remove.
2
Press TV MENU, then press ▲/▼ to select
“Channel”, then press ▶ or ENTER.
Dot by Dot (for PC/HDMI mode
only):
Press ▲/▼ to select “Ch Label”, then press ▶ or
ENTER to display the Ch Label menu.
Detects the resolution of the signal
of the PC image and it will be shown
on the screen with same amount of
pixels.
3
Press ▲/▼ to select “Label Clear”. Press ▶ or
ENTER.
4
5
Press EXIT to return to the normal screen.
Repeat steps 1-4 to erase other channel labels.
NOTE
•
•
You can enter to the same menu screen from “Picture” menu.
You cannot select “Side Bar” and “S.Stretch” when a 720p, 1080i
or 1080p signal is being input.
•
•
Some High Definition and/or Digital broadcasts may not allow you
to change the picture size.
In PC Mode, only the “Side Bar”, “Stretch” and “Dot by Dot”
picture size features are available. In PC Mode (WXGA), only the
“Stretch” and “Dot by Dot” picture size features are available.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
1
2
3
4
Tune the TV to the desired program.
Press TV MENU and the MENU screen displays.
Press ▲/▼ to select “Setup”, then press ▶ or ENTER.
Closed captions and digital closed
captions
Press ▲/▼ to select “Closed Caption”, then press
NOTE
▶ or ENTER.
• Closed Caption might not appear according to the
The Closed Caption menu will appear.
condition of the signal from the broadcasting station.
5
6
Press ◀/▶ to setting the “CC Setting” to “On”.
Your TV/DVD is equipped with an internal Closed
Caption decoder. It allows you to view conversations,
narration and sound effects as subtitles on your
TV/DVD. Closed Captions are available on some TV
programs and on some VHS home video tapes at the
discretion of the program provider.
Press ▲/▼ to select “Analog Caption” or “Digital
Caption”.
When you select “Analog Caption”, you can choose
from C1, C2, C3, C4, T1, T2, T3 and T4.
When you select “Digital Caption”, you can choose
from CS1, CS2, CS3, CS4, CS5 and CS6.
Digital Closed Caption service is a new caption
service available only on digital TV programs (also
at the discretion of the service provider). It is a more
flexible system than the original Closed Caption
system, because it allows a variety of caption sizes
and font styles. When the Digital Closed Caption
service is in use, it will be indicated by the appearance
of a 3-letter abbreviation that also indicates the
language of the Digital Closed Captions: ENG
(English), SPA (Spanish), FRA (French) or other
language codes.
7
8
Press ◀/▶ to select the desired Closed Caption
mode for both Analog and Digital Caption.
Press ▲/▼ to select “CC Priority”, then press ◀ / ▶
to select “Digital CC” or “Analog CC”.
• Depending on the broadcast signal, some
Analog Captions will function with a Digital
broadcast signal.This step prevent that two kind
of captions are overlapping.
9
Press EXIT to return to the normal screen.
Not all programs and VHS videotapes offer closed
captions. Please look for the “ ” symbol to ensure
that captions will be shown.
NOTE
• To turn the Closed Caption feature off, setting the “CC
Setting” to “Off”.
In the Closed Caption system, there can be more than
one caption service provided. Each is identified by
its own number. The “C1” and “C2” services display
subtitles of TV programs superimposed over the
program’s picture. Generally, Closed Captions in
English are transmitted on C1 and Closed Captions in
other languages are transmitted on C2.
In the Closed Caption system, the “T1” or “T2”
services display text that is unrelated to the program
being viewed (e.g., weather or news). These services
are also superimposed over the program currently
being viewed.
NOTE
• If the program or video you selected is not closed-captioned, no captions will display on-screen.
• If text is not available in your viewing area, a black rectangle may appear on-screen. If this happens, setting the “CC
Setting” to “Off”.
• When selecting Closed Captions, the captioning will be delayed approx. 10 seconds.
• If no caption signal is received, no captions will appear, but the television will remain in the Caption Mode.
• Misspellings or unusual characters may occasionally appear during Closed Captioning. This is normal with Closed
Captioning, especially with live programs. This is because during live programs, captions are also entered live. These
transmissions do not allow time for editing.
• When Captions are being displayed, on-screen displays, such as volume and mute may be seen but may interfere with
Closed Captions.
• Some Cable TV systems and copy protection systems may interfere with the Closed Captioned signal.
• If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder may not appear or may appear with
strange characters or misspelled words. In this case, adjust the antenna for better reception or use an outdoor antenna.
• When a Digital TV Program has both Digital Closed Caption and Analog Closed Caption signals, Digital Closed Caption is
displayed.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
Password setting for parental
control
Caption setup
This function allows you to adjust the closed caption
screen appearance to suit your preference.
Allows you to use a password to protect certain
settings from being accidentally changed.
1
2
Press TV MENU and the MENU screen displays.
IMPORTANT:
Press ▲/▼ to select “Setup”, then press ▶ or
Three conditions must be met to enable the V-Chip
ENTER.
3
① Password is registered.
② V-Chip settings have been made.
③ “V-Chip” is set to “On”.
Press ▲/▼ to select “Closed Caption”, then press
▶ or ENTER.
The Closed Caption menu displays.
4
5
6
7
Press ▲/▼ to select “Digital CC Preset”, then press
◀/▶ to select “Custom”.
Setting a password
Press ▲/▼ to select “CC Advanced”, then press ▶
1
2
Press TV MENU and the MENU screen displays.
or ENTER.
Press ▲/▼ to select “Lock”, then press ▶ or
Press ▲/▼ to select the desired item, then press
ENTER.
◀/▶ to change the setting.
3
Select and enter a password (4 digits) using the
Press EXIT to return to the normal screen.
0–9, then press ENTER.
• “ ” appears instead of the number.
Selectable parameters available in each
adjustment item.
4
Enter the same password again to confirm, then
press ENTER, the password is now registered and
the Lock menu will appear on the screen.
Item
Selectable parameter
Text Size:
Text Type:
Auto, Small, Standard, Large
Changing the password
Allows you to change your current password.
Auto, Style1, Style2, Style3, Style4, Style5,
Style6, Style7
1
2
Repeat steps 1 to 3 in Setting a password.
Text Edge: Auto, None, Raised, Depressed, Uniform,
Press ▲/▼ to select “Change Password”, then
Left Shadow, Right Shadow
press ▶ or ENTER.
3
4
5
Enter a new password using 0–9, then press
Text Color: Auto, Black, White, Red, Green, Blue,
ENTER.
Yellow, Magenta, Cyan
Enter the same password again to confirm, then
Text
Auto, Solid, Transparent, Translucent,
Flashing
press ENTER.
Opacity:
The screen returns to Lock menu. Your new
Background Auto, Black, White, Red, Green, Blue,
Color: Yellow, Magenta, Cyan
password has been set.
Background Auto, Solid, Transparent, Translucent,
NOTE
Opacity:
Flashing
• As a precautionary measure, make a note of your
password and keep it in a familiar place.
• The “V-Chip Set (DTV)” will only be selectable when
a new rating system can be downloaded via digital
broadcasting in the U.S.
NOTE
• This feature is designed to customize Digital Captions
only.
• The “Auto” value depends on the broadcasting station.
• You cannot set both “Text Color” and “Background Color”
as a same color.
How to enter the Lock menu
• You cannot set both “Text Opacity” and “Background
Opacity” to “Transparent”.
1
2
Press TV MENU and the MENU screen displays.
Press ▲/▼ to select “Lock”, then press ▶ or
ENTER.
3
Input the 4-digit password by using 0–9, then press
ENTER.
The Lock menu displays.
To clear the all V-Chip settings
1
In the Lock menu, press ▲/▼ to select “V-Chip
Clear”, then press ▶ or ENTER.
2
Input the 4-digit password by using 0–9, then press
ENTER. All your settings return to the factory
settings.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
Parental control (V-CHIP)
V-CHIP might not function according to the condition of the signal from the broadcasting station.
V-CHIP is an electronic filtering device built into your TV/DVD. This tool gives parents a great degree of control
over broadcasts accessed by their children. It allows parents to select programs judged suitable for child viewing
while blocking ones judged not suitable. It does so automatically once you activate the V-CHIP feature in your
TV/DVD.
V-CHIP menu will not be selectable from the menu if you do not first configure your password.
(See page 24 for password setting for parental control.)
• The U.S. has two rating systems for viewing content: movie ratings and TV Parental Guidelines.
• The TV Parental Guidelines work in conjunction with the V-CHIP to help parents screen out inappropriate television shows
from their children.
• Movie ratings are used for original movies rated by the Motion Picture Association of America (MPAA) as watched on cable
TV and not edited for television. The V-CHIP can also be set to block MPAA-rated movies.
TV Parental Guidelines
Content
FANTASY
VIOLENCE
SEXUAL
ADULT
SEXUAL
DIALOG
TV RATING
VIOLENCE
SITUATIONS
LANGUAGE
TV-Y (All children)
TV-Y7 (Directed to older children)
TV-G (General audience)
TV-PG (Parental Guidance suggested)
TV-14 (Parents strongly cautioned)
TV-MA (Mature audience only)
S
S
S
S
X
X
X
S
S
S
X
X
X
S
S
S
X
X
X
S
S
S
X
X
Suggested
age
X
S: The content rating can be set, but this rating is not normally broadcast by TV stations.
X: Content rating can be set.
EXAMPLE
• If you select “TV-G”, this will automatically block the higher ratings “TV-PG”, “TV-14” and “TV-MA”.
Voluntary movie rating system (MPAA)
MOVIE RATING
Description
G
General audiences. All ages admitted.
PG
PG-13
Parental guidance suggested. Some material may not be suitable for children.
Parents strongly cautioned. Some material may be inappropriate for children under 13.
Age
R
Restricted. Under 17 requires accompanying parent or adult guardian (age varies in some jurisdictions).
No one 17 and under admitted.
X is an older rating that is unified with NC-17 but may be encoded in the data of older movies.
NC-17
X
EXAMPLE
• If you select “PG-13”, this will automatically block the higher ratings “R”, “NC-17” and “X”.
NOTE
• Voluntary movie rating system only uses an age-based rating.
TV Parental Guidelines
(TV Guidelines)
Voluntary movie rating system
(MPAA)
1
1
In Lock menu, press ▲/▼ to select “V-Chip”, then
Repeat steps 1 and 2 in TV Parental Guidelines
press ◀/▶ to select “On” .
(TV Guidelines).
2
3
4
5
2
3
4
Press ▲/▼ to select “V-Chip Set”, then press ▶ or
Press ▲/▼ to select “Movie Rating”, then press ▶
ENTER.
or ENTER.
Press ▲/▼ to select “TV Rating”, then press ▶ or
Press ▲/▼ to select the desired rating, then press
ENTER.
ENTER.
Press ▲/▼/◀/▶ to select the desired rating, then
Press EXIT to return to the normal screen.
press ENTER.
Press EXIT to return to the normal screen.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
Canadian rating systems
• The TV rating systems in Canada are based on the Canadian Radio-Television and Telecommunications Commission
(CRTC) policy on violence in television programming.
• While violence is the most important content element to be rated, the structure developed takes into consideration other
program content like language, nudity, sexuality and mature themes.
• When setting the V-CHIP on the Canadian system you can choose either the Canadian English ratings or the Canadian
French ratings.
Canadian English ratings
Rating
Description
Exempt: Includes news, sports, documentaries and other information programming; talk shows, music
E
videos, and variety programming.
Children: Intended for younger children under the age of 8 years. Pays careful attention to themes that
could threaten their sense of security and well-being.
C
Children over 8 years old: Contains no portrayal of violence as the preferred, acceptable, or only way to resolve
C8+
G
conflict; nor encourage children to imitate dangerous acts which they may see on the screen.
General: Considered acceptable for all age groups. Appropriate viewing for the entire family, contains very
little violence, physical, verbal or emotional.
Age
Parental Guidance: Intended for a general audience, but may not be suitable for younger children (under
PG
the age of 8) because it could contain controversial themes or issues.
Over 14 Years: Could contain themes where violence is one of the dominant elements of the storyline, but
it must be integral to the development of plot or character. Language usage could be profane and nudity
present within the context of the theme.
Adults: Intended for viewers 18 years and older and might contain depictions of violence, which while
related to the development of plot, character or themes, are intended for adult viewing.
Could contain graphic language and portrayals of sex and nudity.
14+
18+
Example: If you select “G”, this will automatically block the higher ratings “PG”, “14+” and “18+”.
Canadian French ratings
Rating
Description
E
Exempt programming.
General: All ages and children, contains minimal direct violence, but may be integrated into the plot in a
G
humorous or unrealistic manner.
General but inadvisable for young children: May be viewed by a wide public audience, but could contain
8 ans+ scenes disturbing to children under 8 who cannot distinguish between imaginary and real situations.
Age
Recommended for viewing with parent.
Over 13 years: Could contain scenes of frequent violent scenes and therefore recommended for viewing
13 ans+
with parent.
16 ans+ Over 16 years: Could contain frequent violent scenes and intense violence.
18 ans+ Over 18 years: Only for adult viewing. Could contain frequent violent scenes and extreme violence.
Example: If you select “8 ans+”, this will automatically block the higher ratings “13 ans+”, “16 ans+” and “18 ans+”.
How to temporarily release the
V-Chip block
Canadian English ratings
1
Repeat steps 1 and 2 in TV Parental Guidelines
The V-Chip block is working and censors a broadcast,
(TV Guidelines).
“This program has been blocked!” displays.
2
Select “CAN ENG Rating”, then press ▶ or ENTER.
Press ▲/▼ to select E, C, C8+, G, PG, 14+ or 18+,
then press ENTER.
1
2
Press MUTE while the V-Chip is working and then
the password entering menu displays.
Enter your 4-digit password with 0–9, then press
3
Press EXIT to return to the normal screen.
ENTER.
At this time V-Chip block temporarily releases.
Canadian French ratings
Reactivating the temporarily released V-Chip block
Method 1: Change to the other channel.
1
Repeat steps 1 and 2 in TV Parental Guidelines
Method 2: Switch off the TV power.
(TV Guidelines).
NOTE
2
Select “CAN FRE Rating”, then press ▶ or ENTER.
Press ▲/▼ to select E ,G, 8 ans+, 13 ans+, 16 ans+
or 18 ans+, then press ENTER.
• Performing any of the two above will activate the V-Chip
block.
3
Press EXIT to return to the normal screen.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Other convenience functions
Menu operation buttons
Quick guide for MENU operation
Use the following buttons on the remote control to
example : Select Language
operate the menu.
1
Press TV MENU and the MENU screen displays.
Main Menu
Picture
Audio
Channel
Lock
>>
Setup
ENTER : Set
: Select
2
Press ▲/▼ to select “Setup”, then press ▶ or
ENTER.
Press ▲/▼ to select “Language”.
Setup
Closed Caption
>>
Language
English
Video Label
Auto Shut Off
Reset
>>
Off
>>
: Select
: Adjust
3
4
Press ◀/▶ to select the desired language.
...on the following pages the MENU can be called
in the same way as here.
Press EXIT to return to the normal screen.
NOTE
• Some menu items may not displayed depending on the
selected input source.
• If no buttons are pressed for more than approx. 60
seconds, the menu screen will return to normal screen
automatically.
TV MENU: Press to open the menu screen.
▲/▼/◀/▶: Press to select a desired item on the
screen or adjust a selected item.
ENTER: Press to go to the next step or complete
the setting.
RETURN: Press to return to the previous step.
EXIT:
Press to exit from the menu screen.
All changed settings will be saved.
: Adjust
: Select
ENTER : Set
The lower part of the menu screen is an
operational guide for the remote control.
It will change in accordance with each menu
setting screen.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Other convenience functions
Icon
Picture
Selected item
Description
Picture Setting
Brightness / Contrast /
Sharpness / Color / Tint
Color Temperature
Backlight
You can adjust the picture quality to your preference.
Bluish (Cool) / Neutral (Standard) / Reddish (Warm)
Backlight adjusts the screen brightness for improved picture clarity.
Use this feature to change the Black level automatically according
to the brightness of an image.The Black level will become dark in
a dark scene.
DBC
On / Off
AV Mode
Sports
For a clear-cut image emphasizing high contrast, useful for sports
viewing.
Standard
Movie
For a highly defined image in a normal lighting.
For a movie.
Memory
Allows the user to customize settings as desired.You can set the
mode for each input source.
View Mode
Film Mode
See page 22.
On / Off
A smoother motion may be obtained by setting the Film Mode to
“On” when you view a DVD from the DVD player.
To adjust the horizontal / vertical position of the image on the PC
Monitor screen. Each video standard will require a different value
for this setting.
PC Setting*
Hor Position / Ver Position
(see pages 18, 19)
Clock
Phase
To minimize any vertical bars or stripes visible on the screen background.
This must be adjusted after the frequency has been set optimize
picture quality.
Auto Adjust
On / Off
To adjust the all PC settings automatically.
DNR
DNR (Digital Noise Reduction) can reduce the roughness of the
picture.
Bass / Treble / Balance
MTS
Surround
You can adjust the sound quality to your preference.
See page 21.
Audio
Stereo / SAP / Mono
On / Off
The dynamic presence and sound created offers a thoroughly
enjoyable listening experience.
Audio Language
HDMI Audio
When two or more audio languages are included in a digital
signal, you can select one of the audio languages.
When you connect the HDMI device to the TV/DVD, select this
setting.
HDMI
DVI
When you connect the DVI device to the TV/DVD with analog
audio cords, select this setting.
Add/Delete
DTV Signal
Adding Channel / Add/Delete See page 21.
/ Clear All
Channel
Select “DTV Signal”, then press ▶ or ENTER.The Digital-Signal
strength screen will appear.
If necessary, adjust the direction of the antenna to obtain the
maximum signal strength.
Auto Ch Memory
Ch Label
Signal Type / Automatic
Search
See page 21.
Channel Number / Ch Label / See page 22.
Label Clear
See pages 24~26.
Lock
Closed Caption
Language
See page 23.
Setup
English / Français / Español You can choose from three different languages (English, French
and Spanish) for the on-screen displays.
Video Label
Let you set the input terminal displayed when using the “Input Select”
menu or channel display.
Press ▲/▼ to select the specific input source which you want to change.
Press ◀/▶ to select the new label for the selected input source.
Auto Shut Off
Reset
On / Off
In case of “Auto Shut Off” feature is “On”, if a station being viewed
stops broadcasting, the TV/DVD will automatically shut itself off
after 15 minutes.
• If Auto Shut Off is “On” and the broadcast signal is weak, the
TV/DVD may automatically shut itself off. If this happens, turn
Auto Shut Off to “Off”.
The Reset function returns your settings to the factory settings.
NOTE
* “PC Setting” is available only for PC INPUT (INPUT 4).
* When you connect the PC via HDMI input, you can setting “Hor Position” and “Ver Position” only.
* Whenever you change the PC display resolution settings and find that the characters of the PC input has rough edges or
has some flickerings, please go to PC Setting and do an “Auto Adjust” to improve the display of the PC input.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching the DVD
Preparation
2
3
On the screen, “ ” changes to “Loading” and then
playback will commence.
Perform the following steps before you press POWER
• A menu screen appear on the TV screen, if the disc
has a menu feature. In this case, press ▲/▼/◀/▶ or
ENTER to operate a menu feature.
on the remote control unit.
1
Insert the batteries into the remote control unit.
Press STOP to end playback.
(See page 10.)
• The unit can record where you stop a video, but it
depends on a disc you are using. Press PLAY to
resume a playback point. The unit can store a memory
of stopped point of last five discs that you have played.
When one of these discs is next loaded, you can
resume playback from where you stopped playing last
time.
2
Plug in the AC cord to the AC outlet. (See page 9.)
Turning on the power
Press POWER on the TV/DVD, or POWER on the
remote control.
• If you press STOP again (“Resume off” appears on the
screen), the TV/DVD will clear the stopped point.
• It is only DVD videos that a stopped point can be
stored in the unit with.
• POWER indicator (Green): The TV/DVD is on. (“Please
wait” will appear for a few seconds on the screen.)
Select the DVD mode
• You cannot save a stopped point for some discs. If a
number of discs played and stored in the unit exceeds
five, a new memory will overwrite the old stored
memory.
Press TV/DVD to select the DVD mode.
Turning off the power
4
Press EJECT.
Remove the disc and then press POWER.
The TV/DVD turns off.
Press POWER on the TV/DVD, or POWER on the
remote control.
• When you eject the disc, you may hear mechanism
noise, but it is not malfunction.
• The TV/DVD enters standby mode and the image on the
screen disappears.
• The POWER indicator on the TV/DVD changes to Red.
NOTE
Status display of DVD disc
• If you are not going to use this TV/DVD for a long period
of time, be sure to remove the AC cord from the power
outlet.
Press DISPLAY. The status display of the disc will
appear on the screen.
• Display messages may change at every time when you
press DISPLAY for some discs or files.
• Weak electric power is still consumed even when the
power is turned off.
NOTE
Playback procedure
• If the TV/DVD does not operate properly:
Static electricity, etc., may affect the player’s operation.
Disconnect the AC power cord once, then connect it
again.
1
Place the disc in the disc slot with the label side
facing forward. (If the disc has a label.) Hold the
disc without touching its surface, align it with the
guides, and place it in position.
• About inserting disc:
If the unit is slanted or moved while inserting disc, the disc
may get damage.
• If a disc is inserted during some modes other than
DVD mode, it may switch to DVD mode and then
playback may be begun automatically.
NOTE
• If a non-compatible disc is loaded, “Can’t play disc” or “Incompatible disc region number Can’t play disc” will appear on the
TV screen according to the type of loaded disc. In this case, check your disc again (see pages 6 and 36).
• Some discs may take a minute or so to start playback.
• When an 8 cm disc is placed into the disc slot, and the playback picture or menu display does not appear, press PLAY.
• A prohibition message “Depending on the disc, this operation may be prohibited” or “This operation can’t be performed”
may appear at the screen. This message means either the feature you tried is not available on the disc, or the unit cannot
access the feature at this time. This does not indicate a problem with the unit.
• When you set a single-faced disc label downwards (i.e. the wrong way up) “Loading” will appear on the display and then
“Can’t play disc” will be displayed.
• Some playback operations of DVDs may be intentionally fixed by software producers. Since this TV/DVD plays DVDs
according to the disc content recorded, some playback features may not be available. Also refer to the instructions supplied
with the DVDs.
• Do not move the unit during playback. Doing so may damage the disc.
• Use EJECT to unload and eject the disc.
• Do not put any objects other than discs on the disc slot. Doing so may cause the unit to malfunction.
• In many instances, a menu screen will appear after playback of a movie is completed. Prolonged display of an on-screen
menu may damage your television set, permanently etching that image onto its screen. To avoid this, be sure to press
POWER on your remote control once the movie is completed.
• There may be a slight delay between the button is pressed and the function activates.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching the DVD
Special playback
Locating desired scene
Fast Forward Playback
Use the title, chapter and time recorded on the disc to
locate the desired point to playback.
Press FWD during normal playback.
Each press of FWD will increase the speed of the search.
• To resume normal playback, press PLAY.
Press DIRECT SKIP during playback.
1
2
Press ▲/▼ to select the “Title Search”, “Chapter
Search”, “Time Search” or “Track Search” (Audio
CD), then press ENTER.
Review Playback
Press REV during normal playback.
Each press of REV will increase the speed of the search.
• To resume normal playback, press PLAY.
Press Number buttons (0–9), then press ▶ or
3
4
ENTER to input the number.
Still Playback
• If you input a wrong number, press CANCEL.
• Refer to the package supplied with the disc to check
the numbers.
Press STILL/PAUSE during normal playback to pause
playback.
• To resume normal playback, press PLAY or STILL/
PAUSE.
Press ENTER.
• Playback starts.
Frame Advance
Press STILL/PAUSE during normal playback.
One frame is advanced each time you press tt or uu .
• To resume normal playback, press PLAY.
• When you change the title, playback starts from
Chapter 1 of the selected title.
• Some discs may not work in the above operation.
Slow-motion Playback
Press SLOW ( ) or SLOW ( ) during normal playback or
still playback.
A-B Repeat playback
Each press of SLOW will change the speed of the slow.
• To resume normal playback, press PLAY.
• To resume the still playback, press STILL/PAUSE.
A-B repeat playback allows you to repeat material
between two selected points.
Locating a chapter or track
1
2
Press A-B REPEAT during playback.
Press SKIP(
) Forward or SKIP(
) Reverse during
The start point is selected.
playback to locate a chapter/track that you want to watch.
Each time you press the button, a chapter or track is
skipped.
Press A-B REPEAT again.
The end point is selected.
Playback starts at the point that you selected.
Playback stops at the end point, returns to Point A
automatically, then starts again.
• To resume normal playback press A-B REPEAT
again.
NOTE
• The TV/DVD is capable of holding a still video image or On
screen display image on your television screen indefinitely.
If you leave the still video image or On screen display image
displayed on your TV for an extended period of time, you
risk permanent damage to your television screen.
NOTE
• In A-B Repeat mode, subtitles near the A or B locations
may not be displayed.
Zooming
• You may not be able to set A-B Repeat during certain
scenes of the DVD.
This TV/DVD will allow you to zoom in on the frame
image. You can then make selections by switching the
position of the frame.
• A-B Repeat does not work with an interactive DVD, MP3/
WMA/JPEG-CD.
1
2
3
Press ZOOM during playback.
The center part of the image will be zoomed in.
Each press of ZOOM will change the ZOOM
magnification Zoom 2x and Zoom 4x.
Press ▲/▼/◀/▶ to view a different part of the
frame.
You may move the frame from the center position
UP, DOWN, LEFT or RIGHT.
In the zoom mode press ZOOM repeatedly to
return to a 1:1 view.
NOTE
• You can select the Still Playback or Fast Forward (Review)
Playback in the zoom mode.
• Some discs may not respond to zoom feature.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching the DVD
Marking desired scenes
Changing soundtrack language
The TV/DVD stores the points that you want to watch
You can select the language when you play a
again up to 12 points.
multilingual disc.
You can resume playback from each scene.
1
Press AUDIO during playback.
The current soundtrack language will appear.
Marking the scenes
Current/Total
Audio
1/2
English
Dolby Digital 2/0CH
1
2
Press MARKER during playback.
Select the blank Marker using ▲/▼/◀/▶, then
press ENTER at the desired scene.
2
Press AUDIO repeatedly until the desired
language is selected.
• Up to 12 scenes can be selected.
• Repeat this procedure to set the other 11 scenes.
The on-screen display will disappear after a few
3
Press MARKER to return to the normal screen.
seconds.
Current/Total
Returning to the scenes
Audio
2/2
French
Dolby Digital 2/0CH
1
2
3
Press MARKER during playback or stop mode.
Press ▲/▼/◀/▶ to select the Marker 1-12.
Press ENTER.
NOTE
Playback starts from the marked scene.
• If the desired language is not heard after pressing AUDIO
several times, the language is not recorded on the disc.
• Changing soundtrack language is cancelled after
“Resume off”.
To cancel the Marker
Follow the above steps 1~2, then press CANCEL.
The initial default language or available language will be
heard if the disc is played back again.
NOTE
• Some discs may not work with the marking operation.
• The marking is cancelled when you eject the disc or turn
the power off.
Subtitles
• Some subtitles recorded around the marker may fail to
appear.
Changing the subtitle language
You can select the language when playing back a disc
recorded with multilingual subtitles.
1
Press SUBTITLE repeatedly during playback until
your desired language appears.
The on-screen display will disappear after a few
seconds.
Changing angles
When playing back a disc recorded with multi-angle
facility, you can change the view angle.
Current/Total
1
Press ANGLE during playback.
The current angle will appear.
Current/Total
Subtitle 1/2
English
Angle
1/2
Turning the subtitles off
Press SUBTITLE during playback until “Off” appears.
2
Press ANGLE repeatedly until the desired angle is
selected.
NOTE
• Changing subtitle language is cancelled after “Resume
off”.
NOTE
• Some functions may not work on some DVDs. You may
not be able to turn subtitles on or off or change subtitles.
While playing the DVD, the subtitle may change when:
- you eject or insert the disc.
• In case of JPEG-playback, the
90 degrees to the right.
• Depending on the DVD, you may not be able to change
the angles even if multi-angles are recorded on the DVD.
JPEG-image is rotated
- you change the title.
• In some cases, the subtitle language is not changed to the
selected one immediately.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching the DVD
Using HOME MENU
Playing a disc
Play mode
A-B repeat playback
A-B repeat playback allows you to repeat selection
between two selected points.
1
Press SETUP during stop mode.
HOME MENU will appear.
1
Press PLAY MODE
during playback.
Play Mode screen will
appear.
Play Mode
2
Press ▲/▼/◀/▶
HOME MENU
DVD
A-B Repeat
A(Start Point)
B(End Point)
Off
to select “Disc
Audio Settings
Video Adjust
Repeat
Random
Navigator”, then press
Program
Search Mode
Play Mode
Disc Navigator
ENTER.
Initial Settings
2
3
4
Press ▲/▼ to select “A-B Repeat”, then press ▶ or
ENTER
Disc Navigator
Title
Chapter
3
4
Press ▲/▼ to select
desired option, then
press ENTER.
.
Press ▲/▼ to select “A(Start Point)”, then press
ENTER. The start point is selected.
• Some discs may not work Disc Navigator.
• Depending on a disc, you can select Title, Chapter, or
both.
Press ▲/▼ to select “B(End Point)”, then press
ENTER.
Press ▲/▼/◀/▶ or Number Buttons (0–9) to
select Title or Chapter, then press ENTER.
• Press SKIP ( ) or SKIP ( ) to move previous/next
page.
The end point is selected. Playback starts at the
point that you selected. Playback stops at the end
point and returns to Point A automatically, then
starts again.
• Press RETURN to return to previous step.
To resume normal playback
Select “Off” in step 3.
Playing a file
1
2
3
Press SETUP during stop mode.
NOTE
HOME MENU will appear.
• Some discs may not work Play mode function.
• A-B Repeat playback does not work with MP3/WMA CD.
Press ▲/▼/◀/▶ to select “Disc Navigator”, then
press ENTER.
Repeat playback
Press ▲/▼ to select
00:00/ 00:00
0kbps
1
2
3
Press PLAY MODE during playback.
folder, then press
Play Mode screen will appear.
ENTER.
Folder1
Folder2
Folder3
Folder4
Press ▲/▼ to select “Repeat”, then press ▶ or
ENTER
.
Press ▲/▼ to select desired repeat option, then
press ENTER.
4
Press ▲/▼ to select file, then press ENTER.
• If you select JPEG file, unit shows the pictures one
after another automatically.
The unit automatically starts repeat playback after
finishing the current title or chapter.
• Press SETUP to clear HOME MENU screen.
• Press RETURN to go to previous step.
To resume normal playback
Select “Repeat Off” in step 3.
NOTE
Random playback
• When music files and JPEG files are recorded in one
disc, you can play simultaneously. Please select the
music file then select the JPEG file.
1
2
3
Press PLAY MODE during playback.
Play Mode screen will appear.
Press ▲/▼ to select “Random”, then press ▶ or
ENTER.
Press ▲/▼ to select desired random playback
option, then press ENTER.
The unit automatically starts random playback.
To resume normal playback
Select “Random Off” in step 3.
NOTE
• You cannot play Random for programmed contents
(Random play is not permitted during Program playback).
• During Random playback, it may repeat the same title,
chapter or track.
• Random playback does not work with MP3/WMA CD.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching the DVD
Program playback
Audio Settings menu
1
2
3
Press PLAY MODE during playback.
The Audio Settings menu offers features for adjusting
Play Mode screen will appear.
the way discs sound.
Press ▲/▼ to select “Program”, then press or
1
2
Press SETUP during stop mode.
ENTER.
HOME MENU will appear.
Program
Current
Title:02 Chapter:001
Chapter 1-004
Press ▲/▼ to select
“Create/Edit”, then
press ENTER. “Create/
Edit” display differs,
depending on discs or
files.
Program Step
Title 1-38
01. 01
02.
Title 01
Title 02
Title 03
Title 04
Title 05
Title 06
Title 07
Title 08
Chapter 001
Chapter 002
Chapter 003
Chapter 004
Press ▲/▼/◀/▶ to
HOME MENU
DVD
03.
select “Audio Settings”,
04.
Audio Settings
Video Adjust
05.
then press ENTER.
06.
07.
Play Mode
Disc Navigator
08.
Initial Settings
4
5
Press ▲/▼/◀/▶ to select Title, Chapter, Track or
Audio Settings
3
4
Press ▲/▼/◀/▶ to
setting the option, then
press ENTER.
Equalizer
Audio DRC
Dialog
Off
File, then press ENTER.
Rock
Pop
• When you add a program, find where you want to add
it (Program Step) and select Title, Chapter or Track
then press ENTER. (It will be added to the left if File is
added.)
Live
Dance
Techno
Classic
Soft
• To go to previous step, press RETURN.
• To delete a program, select Program Step that you
want to delete and press CANCEL.
Press SETUP to save the setting.
Equalizer
Select the most suitable setting to match a category of
music that you are listening to.
Press PLAY.
• To play existing programmed contents, select
“Playback Start” from Play Mode screen and press
ENTER.
Audio DRC
• Loud sound level goes down and quiet sound level
goes up while playing.This is useful, for instance,
when you watch a film in the late night.
• It only works with Dolby Digital Sound.
• The effect depends on your AV amplifier and speakers
volume. Adjust the sound as you wish and find the
most effective setting.
• To resume normal playback, select “Playback
Stop” in Play Mode screen and press ENTER.Your
programmed contents are saved.
• To delete all programmed contents, select “Program
Delete” in Play Mode screen and press ENTER.
NOTE
• You can repeat the programmed contents. Select
“Program Repeat” from “Repeat” in the Play Mode
screen during Program playback.
Dialog
Adjust setting when you cannot hear dialogs very well.
• You cannot play Random for programmed contents
(Random play is not permitted during Program
playback).
NOTE
• It may not be very effective for some discs or files.
• In stop mode, you can also enter Play Mode screen by
selecting “Play Mode” in HOME MENU.
Locating desired scene
1
2
3
Press PLAY MODE during playback.
Play Mode screen will appear.
Press ▲/▼ to select “Search Mode”, then press ▶
or ENTER.
Press ▲/▼ to select desired search mode option,
then press ▶ or ENTER.
• Search Mode options differs, depending on discs or
files.
4
Input Title, Chapter,
Play Mode
Track or Folder number
A-B Repeat
Repeat
Title Search
Input Chapter
Chapter Search
Time Search
or Time by using
Random
0
0
1
Program
Number buttons (0–9)
and press ENTER.
Search Mode
• For instance, if you want to enter 1hr 4min (64:00),
input 6, 4, 0, 0.
NOTE
• You can locate desired scene in Menu screen for some
DVD video.
• In stop mode, you can also enter Play Mode screen by
selecting “Play Mode” in HOME MENU.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Function setup
Watching the DVD
Video Adjust menu
Customizing The Function Settings
From the Video Adjust menu you can adjust various
You can change the default settings to customize
settings that affect how the picture is presented.
performance to your preference.
1
2
Press SETUP during stop mode.
Setting procedure
HOME MENU will appear.
1
Press SETUP in stop mode.
Press ▲/▼/◀/▶ to select
HOME MENU
DVD
HOME MENU will appear.
“Video Adjust”, then
Audio Settings
Video Adjust
2
Press ▲/▼/◀/▶ to
HOME MENU
DVD
press ENTER.
Play Mode
Disc Navigator
select “Initial Settings”,
then press ENTER.
Audio Settings
Video Adjust
Initial Settings
Play Mode
Disc Navigator
3
Press ▲/▼/◀/▶ to
setting the option, then
press ENTER.
Video Adjust
Sharpness
Brightness
Contrast
Gamma
Initial Settings
Fine
Standard
Soft
3
4
Press ▲/▼/◀/▶ to select the desired option, then
Hue
Chroma Level
press ENTER.
Change the selection using ▲/▼/◀/▶ or ENTER,
by referring to the corresponding page 35.
Repeat steps 3 and 4 to change other option.
4
Press SETUP to save the setting.
5
To clear HOME MENU screen, press SETUP.
Sharpness
Adjust sharpness of images.
Brightness
Adjust brightness of images.
Contrast
Adjust a ratio of brightness between the brightest part and
the darkest part.
Gamma
Emphasize dark part of images.
Hue
Adjust a balance between green and red.
Chroma Level
Adjust color density. It is effective with animation or
something with high color density.
NOTE
• It may not be very effective for some discs or files.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Function Setup
Customizing The Function Settings
Setting
Option
Description
Digital Audio Out settings
Digital Out
On
Off
Digital audio is output from the digital outputs.
No digital audio output.
Dolby Digital Out
Dolby Digital
Dolby Digital encoded digital audio is output when playing a Dolby Digital
DVD disc.
Dolby Digital > PCM
DTS
Dolby Digital audio is converted to PCM audio before being output.
DTS encoded digital audio is output when playing a DTS disc. (Noise will be
output if your amplifier/receiver is not compatible with DTS audio.)
DTS Out
Off
No digital audio is output.
96kHz PCM Out
MPEG Out
96kHz > 48kHz
96kHz
MPEG
96 kHz digital audio is converted to 48 kHz for digital output.
96 kHz digital audio is output as is at 96 kHz.
MPEG encoded digital audio is output as is.
MPEG > PCM
MPEG encoded digital audio is converted to PCM audio for digital output.
Video Output settings
TV Screen 4:3 (Letter Box)
Set if you have a conventional 4:3 TV. Widescreen movies are shown with
black bars top and bottom.
4:3 (Pan & Scan)
Set if you have a conventional 4:3 TV. Widescreen movies are shown with
the sides cropped so that the image fills the screen.
16:9 (Wide)
Set if you have a widescreen TV.
Language settings
Audio Language
English/French/Spanish If there is an English, French or Spanish soundtrack on the disc, then it will
be played.
Other Language
Select to choose a language other than the ones displayed. (See Language
Code List on page 37.)
Subtitle Language English/French/Spanish If there is an English, French or Spanish subtitle on the disc, then it will be
displayed.
Other Language
Select to choose a language other than the ones displayed. (see Language
Code List on page 37.)
DVD Menu Lang.
w/Subtitle Lang.
DVD disc menus will be displayed in the same language as your selected
subtitle language, if possible.
English/French/Spanish If there is an English, French or Spanish DVD menu language on the disc,
then it will be displayed.
Other Language
Select to choose a language other than the ones displayed. (see Language
Code List on page 37.)
Subtitle Display
On
Off
Subtitles are displayed according to your selected subtitle language (see
above).
Subtitles are always off by default when you play a DVD disc (note that some
discs override this setting).
Display settings
Angle Indicator
On
Off
A camera icon is displayed on-screen during multi-angle scenes on a DVD
disc.
No multi-angle indication is shown.
Options settings
Parental Lock
See page 36.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Function setup
Level Change
Parental Control
Some discs are specified as not suitable for children.
Such discs can be limited not to playback with the
unit.
Initial Settings
1
2
3
Press
▲
or
▼
to select
Digital Audio Out
Video Output
Language
Parental Lock
Password Change
Level Change
Country Code
“Level Change”, then
press ENTER.
Display
Options
How to into the Parental menu
Initial Settings
Press Number buttons
(0–9) to input the
1
Press SETUP in stop mode.
Digital Audio Out
Video Output
Language
Parental Lock: Level Change
Password
HOME MENU will appear.
current password, then
press ENTER.
Display
2
Press ▲/▼/◀/▶ to select
“Initial Settings”, then
press ENTER.
HOME MENU
DVD
Options
1
2
3
4
5
6
7
8
Off
Audio Settings
Video Adjust
Play Mode
Disc Navigator
Initial Settings
Press
◀
or
▶
to select
Digital Audio Out
Video Output
Language
Parental Lock: Level Change
Password
from the level 1 to level
8. The limitation will be
more severe as the level
number is lower. Then
press ENTER.
Initial Settings
Display
Options
3
Press ▲/▼ to select “Options”, then press ▶ or
1
2
3
4
5
6
7
8
Off
ENTER
.
Then press ▶ or ENTER to enter the Parental Lock
menu.
Level 1: DVD software for adults cannot be played
back.
Set Password
Level 8: Virtually all DVD software can be played
back.
Initial Settings
1
Press
▲
or
▼
to select
Level Off: The parental control setting does not
Digital Audio Out
Video Output
Language
Parental Lock
Password
Level Change
Country Code
“Password”, then press
function.
ENTER.
Display
Options
Country Code
Initial Settings
1
2
3
Press
▲
or
▼
to select
Initial Settings
2
Press Number buttons
(0–9) to input the
password, then press
ENTER.
Digital Audio Out
Video Output
Language
Parental Lock
Password Change
Level Change
Country Code
“Country Code”, then
Digital Audio Out
Video Output
Language
Display
Options
Parental Lock: Register Code Number
press ENTER.
Display
Options
Initial Settings
Press Number buttons
(0–9) to input the
Digital Audio Out
Video Output
Language
Parental Lock: Change Country Code
Password
Change Password
current password, then
press ENTER.
Country Code List
us
Code
Display
Options
Initial Settings
1
2
3
Press
▲
or
▼
to select
2
1
1
9
Digital Audio Out
Video Output
Language
Parental Lock
Password Change
Level Change
Country Code
“Password Change”,
then press ENTER.
Display
Initial Settings
Press
▲
or
▼
to select
Options
Digital Audio Out
Video Output
Language
Parental Lock: Change Country Code
Password
the input mode from
“Country Code List” or
“Code”.
Country Code List
us
Code
Display
Options
Initial Settings
Press Number buttons
(0–9) to input the
2
1
1
9
Digital Audio Out
Video Output
Language
Parental Lock: Password Change
Password
current password, then
press ENTER.
• When you selected “Country Code List”: Press ▲ or ▼
to select Country Code, then press ENTER.
• When you selected “Code”: Press ▶ then use the
Number buttons (0-9) to enter the 4-digit Country
Code then press ENTER. (see Country/Area Code List
on page 37)
New Password
Display
Options
Initial Settings
Press Number buttons
(0–9) to input the
Digital Audio Out
Video Output
Language
Parental Lock: Password Change
Password
new password. Press
ENTER. Now your new
password has been set.
Be sure to remember
this number!
New Password
Display
Options
NOTE
• Depending on the discs, the unit cannot limit playback.
• Some discs may not be encoded with specific rating
level information though its disc jacket says “adult.” For
those discs, the age restriction will not work.
• If you input a wrong number, press ◀, then input
correct number.
NOTE
If you forget the password...
1. Press EJECT to remove the disc.
2. While holding STOP down on the front panel, press 7 on
the remote control for more then 2 seconds.
3. Enter a new password again.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Language Code List
Language (Language code letter), Language code
Japanese (ja), 1001
English (en), 0514
French (fr), 0618
Bhutani (dz), 0426
Esperanto (eo), 0515
Estonian (et), 0520
Basque (eu), 0521
Persian (fa), 0601
Finnish (fi), 0609
Kirghiz (ky), 1125
Sinhalese (si), 1909
Slovak (sk), 1911
Slovenian (sl), 1912
Samoan (sm), 1913
Shona (sn), 1914
Somali (so), 1915
Albanian (sq), 1917
Serbian (sr), 1918
Siswati (ss), 1919
Sesotho (st), 1920
Sundanese (su), 1921
Swahili (sw), 1923
Tamil (ta), 2001
Latin (la), 1201
Lingala (ln), 1214
German (de), 0405
Italian (it), 0920
Laothian (lo), 1215
Lithuanian (lt), 1220
Latvian (lv), 1222
Spanish (es), 0519
Chinese (zh), 2608
Dutch (nl), 1412
Fiji (fj), 0610
Malagasy (mg), 1307
Maori (mi), 1309
Faroese (fo), 0615
Frisian (fy), 0625
Portuguese (pt), 1620
Swedish (sv), 1922
Russian (ru), 1821
Korean (ko), 1115
Greek (el), 0512
Macedonian (mk), 1311
Malayalam (ml), 1312
Mongolian (mn), 1314
Moldavian (mo), 1315
Marathi (mr), 1318
Malay (ms), 1319
Irish (ga), 0701
Scots-Gaelic (gd), 0704
Galician (gl), 0712
Guarani (gn), 0714
Gujarati (gu), 0721
Hausa (ha), 0801
Hindi (hi), 0809
Afar (aa), 0101
Telugu (te), 2005
Tajik (tg), 2007
Abkhazian (ab), 0102
Afrikaans (af), 0106
Amharic (am), 0113
Arabic (ar), 0118
Maltese (mt), 1320
Burmese (my), 1325
Nauru (na), 1401
Thai (th), 2008
Croatian (hr), 0818
Hungarian (hu), 0821
Armenian (hy), 0825
Interlingua (ia), 0901
Interlingue (ie), 0905
Inupiak (ik), 0911
Indonesian (in), 0914
Icelandic (is), 0919
Hebrew (iw), 0923
Yiddish (ji), 1009
Tigrinya (ti), 2009
Turkmen (tk), 2011
Tagalog (tl), 2012
Setswana (tn), 2014
Tonga (to), 2015
Turkish (tr), 2018
Tsonga (ts), 2019
Tatar (tt), 2020
Nepali (ne), 1405
Assamese (as), 0119
Aymara (ay), 0125
Azerbaijani (az), 0126
Bashkir (ba), 0201
Byelorussian (be), 0205
Bulgarian (bg), 0207
Bihari (bh), 0208
Norwegian (no), 1415
Occitan (oc), 1503
Oromo (om), 1513
Oriya (or), 1518
Panjabi (pa), 1601
Polish (pl), 1612
Pashto, Pushto (ps), 1619
Quechua (qu), 1721
Rhaeto-Romance (rm), 1813
Kirundi (rn), 1814
Twi (tw), 2023
Bislama (bi), 0209
Bengali (bn), 0214
Tibetan (bo), 0215
Breton (br), 0218
Catalan (ca), 0301
Corsican (co), 0315
Czech (cs), 0319
Welsh (cy), 0325
Ukrainian (uk), 2111
Urdu (ur), 2118
Javanese (jw), 1023
Georgian (ka), 1101
Kazakh (kk), 1111
Greenlandic (kl), 1112
Cambodian (km), 1113
Kannada (kn), 1114
Kashmiri (ks), 1119
Kurdish (ku), 1121
Uzbek (uz), 2126
Vietnamese (vi), 2209
Volapük (vo), 2215
Wolof (wo), 2315
Xhosa (xh), 2408
Yoruba (yo), 2515
Zulu (zu), 2621
Romanian (ro), 1815
Kinyarwanda (rw), 1823
Sanskrit (sa), 1901
Sindhi (sd), 1904
Sangho (sg), 1907
Serbo-Croatian (sh), 1908
Danish (da), 0401
Country/Area Code List
Country/Area, Country/Area code, Country/Area code letter
Argentina, 0118, ar
Australia, 0121, au
Austria, 0120, at
Belgium, 0205, be
Brazil, 0218, br
Finland, 0609, fi
France, 0618, fr
Malaysia, 1325, my
Mexico, 1324, mx
Singapore, 1907, sg
Spain, 0519, es
Germany, 0405, de
Hong Kong, 0811, hk
India, 0914, in
Netherlands, 1412, nl
New Zealand, 1426, nz
Norway, 1415, no
Sweden, 1905, se
Switzerland, 0308, ch
Taiwan, 2023, tw
Canada, 0301, ca
Chile, 0312, cl
Indonesia, 0904, id
Italy, 0920, it
Pakistan, 1611, pk
Philippines, 1608, ph
Portugal, 1620, pt
Thailand, 2008, th
United Kingdom, 0702, gb
USA, 2119, us
China, 0314, cn
Denmark, 0411, dk
Japan, 1016, jp
Republic of Korea, 1118, kr
Russian Federation, 1821, ru
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Troubleshooting
Problem
Possible Solution
• No power
• Check if you pressed POWER on the TV/DVD, or on the remote control unit.
(See page 20.)
• Is the AC cord disconnected? (See page 9.)
• Has the power been turned on? (See page 20.)
• Unit cannot be operated.
• External influences such as lightning, static electricity, may cause improper
operation. In this case, operate the unit after first turning off the power of the TV/
DVD or unplugging the AC cord and replugging it in after 1 or 2 minutes.
• Remote control unit does not
operate.
• Are batteries inserted with polarity (+, –) aligned? (See page 10.)
• Are batteries worn out? (Replace with new batteries.)
• Are you using it under strong or fluorescent lighting?
• Is a fluorescent light illuminated near the remote control sensor?
• Picture is cut off/with sidebar
screen.
• Are screen mode adjustments such as view mode choose made correctly? (See
page 22.)
• Strange color, light color, or color • Adjust the picture tone. (See page 28.)
misalignment
• Is the room too bright? The picture may look dark in a room that is too bright.
• Power is suddenly turned off.
• Is the sleep timer set? (See page 13.)
• Check the Auto Shut Off settings. (See page 28.)
• The unit’s internal temperature has increased.
Remove any objects blocking vent or clean.
• No picture
• No sound
• Is connection to other components correct? (See page 15.)
• Is correct input signal source selected after connection? (See page 15.)
• Is the correct input selected? (See page 15.)
• Is picture adjustment correct? (See page 28.)
• Is the volume too low? (See page 13.)
• Have you pressed MUTE on the remote control unit? (See page 13.)
• Is connection to other components correct? (See pages 15-19.)
• Check the audio output of the connected external equipment. Is the volume too low
or mufed?
• When external equiprnent is connected via an HDMI cable, you may need to
configure the audio to be output through the HDMI cable.
• The TV sometimes makes a
cracking sound.
• This is not a malfunction. This happens when the cabinet slightly expands and
contracts according to change in temperature. This does not affect the TV’s
performance.
Troubleshooting-Error Message
The example of an error
Possible Solution
message displayed on a screen
• Digital channel signal strength is • Check the antenna cable. Check that the antenna is correctly setup.
low
• Digital channel is scrambled
• Audio only
• It is subscription channel. Contact the service provider.
• The channel has audio contents only.
Troubleshooting-PC mode
Problem
Possible Solution
• There is no image.
• Make sure the RGB cable is properly connected. (See page 19.)
• Make sure the output signal of the PC and the input signal setting of the TV/DVD set
are matched. (See page 19.)
• Some software prohibit video playback on an external display when playing back a
video with a notebook PC. This is not attributable to a problem with the TV/DVD set.
• There is no sound.
• The text is blurred.
• Make sure the PC audio cable is properly connected. (See page 19.)
• Check if the mute function activates, or if the volume is set to minimum. (See page
13.)
• Adjust “Clock” and “Phase” using the PC Setting menu. (See page 28.)
• The image is not displayed in the • Adjust “Hor Position” and “Ver Position” using the PC Setting menu. (See page 28.)
center of the screen.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Troubleshooting-DVD
Problem
Possible Solution
• Playback doesn’t start.
• No disc is inserted. (See page 29.)
• The disc may be dirty. Clean up the disc. (See page 7.)
• The TV/DVD cannot play CD-ROMs, etc. (See page 6.)
• No picture.
• No sound.
• TV/DVD selector is not set correctly. (See page 29.)
• Check the input selector of the amplifier is set properly.
• The TV/DVD is in the special playback mode. (See page 30.)
• Select the correct Audio Output position on AV amplifier.
• Picture is distorted during fast
reverse/forward playback.
• The picture will be distorted occasionally.
• Stopping playback, search,
slowmotion play, repeat play, or
program play, etc. cannot be
performed.
• Some discs may not do some of the functions.
• No surround sound.
• The setup does not match your stereo system.
• The TV/DVD or remote operation
key is not functioning.
• Turn off the TV/DVD and unplug the AC power cord for several minutes, then
replug it.
• Playback does not start when the
title is selected.
• Check the Parental setup. (See page 36.)
• Audio soundtrack and/or subtitle
language is not changed when
you playback a DVD.
• Multilingual language is not recorded on the DVD disc. (See page 31.)
• No subtitle.
• Some discs have no subtitles. (See page 31.)
• Subtitles are cleared. Press SUBTITLE. (See page 31.)
• Angle cannot be changed.
• Multi-angles are not recorded on the DVD disc. (See page 31.)
• “This operation can’t be performed” • The function is prohibited with the TV/DVD or the disc. (See page 29.)
appears on the screen.
Cautions regarding use in high and low temperature environments
• When the unit is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly
delayed. This is not a malfunction, and the unit will recover when the temperature returns to normal.
• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a
heater, as this may cause the cabinet to deform and the Liquid Crystal panel to malfunction.
Storage temperature: –4°F to +140°F (–20°C to +60°C)
CLEARING THE PASSWORD
If you forget the password, clear the password using the following procedure.
1
Press and hold both VOL – on the TV/DVD and
press 0 on the remote control simultaneously for
MENU screen
a few seconds until
screen.
appears on the
2
Now the old password was cleared. You can set
the new password.
The password is
.
NOTE
• As a precautionary measure, make a note of your password above, cut it from this manual, and keep it in a safe place.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Specifications
Item
LCD panel Size
Resolution
Model: LC-19DV28UT
19” Class (18 1/2” Diagonal)
1,049,088 pixels (1366 x 768)
Model: LC-22DV28UT
22” Class (21 1/2” Diagonal)
TV
TV-standard (CCIR)
American TV Standard ATSC/NTSC System
VHF 2-13ch, UHF 14-69ch
1-135ch (non-scrambled channel only.)
Function
Receiving VHF/UHF
Channel
CATV
Digital Terrestrial 2-69ch
Broadcast (8VSB)
Digital Cable*1
(64/256 QAM)
1-135ch (non-scrambled channel only.)
Audio multiplex
BTSC System
Audio out
1.5W x 2
Terminals Side
INPUT 1
AV in, S-VIDEO in
INPUT 2
INPUT 3
INPUT 4
DIGITAL AUDIO
OUTPUT
COMPONENT in, Audio in
HDMI in with HDCP
15-pin mini D-sub female connector, Audio in (φ 3.5 mm stereo minijack)
Coaxial Digital audio output x 1 (PCM/Dolby Digital)
ANT./CABLE
75 Ω Unbalance, F Type x 1 for Analog (VHF/UHF/CATV)
and Digital (AIR/CABLE)
HEADPHONE
Mini-jack for stereo (φ 3.5 mm)
English/French/Spanish
AC 120 V, 60 Hz
OSD language
Power Requirement
Power Consumption
Weight
38 W (0.8 W Standby with AC 120V)
10.3 Ibs./4.7 kg
39 W (0.8 W Standby with AC 120V)
12.1 Ibs./5.5 kg
TV + stand
TV only
TV + stand
TV only
9.0 Ibs./4.1 kg
10.8 Ibs./4.9 kg
Dimension*2
(W x H x D)
18 / x 14 / x 7 / inch
211/8 x 1519/32 x 759/64 inch
211/8 x 1415/32 x 241/64 inch
19
7
59
32
32
64
19
5
41
32
64
64
18 / x 13 / x 2 / inch
DVD
Signal system
Applicable disc
NTSC
section
DVD (12 cm, 8 cm), CD (12 cm, 8 cm)
DVD : 4 Hz - 44K Hz / CD : 4 Hz - 20K Hz
Below Measurable Level
CD : Wavelength: 780 - 790 nm
Maximum output power: 7 mW
DVD : Wavelength: 652 - 662 nm
Maximum output power: 5 mW
Frequency response
Wow and flutter
Pickup
Operating temperature
+41°F to +104°F (+5°C to +40°C)
*1 Emergency alert messages via Cable are unreceivable.
*2 The dimensional drawings are shown on the inside back cover.
• Typical time for power output decrease of about one-half assuming continuous use in a room with normal lighting, normal
brightness and temperature at 77°F/25°C.
• As part of policy of continuous improvement, SHARP reserves the right to make design and specification changes for
product improvement without prior notice. The performance specification figures indicated are nominal values of production
units. There may be some deviations from these values in individual units.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Calling for Service
For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or
customer assistance, please call 1-800-BE-SHARP.
LIMITED WARRANTY
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand Liquid Crystal Display product (the
“Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option,
either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the
purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product or if the serial number or model number affixed to the Product has
been removed, defaced, changed, altered or tampered with. This warranty does not cover installation or signal reception problems. This
limited warranty will not apply if the Product has been or is being used in a commercial setting or application; this warranty is meant solely
for the non-commercial, household use of the Product by consumers in their home or residence. If you intend to or already use this Product
for commercial purposes or in a commercial setting, there are warranties available to cover your use of this Product, the terms of which may
vary. Please contact 1-888-GO-SHARP for further information.
In order to enforce your rights under this limited warranty, you should follow the steps set forth below. You must be able to provide proof of
purchase to the servicer, which proof must include the date of purchase.
To the extent permitted by applicable state law, the warranties set forth are in lieu of, and exclusive of, all other warranties, express or
implied. Specifically ALL OTHER WARRANTIES OTHER THAN THOSE SET FORTH ABOVE ARE EXCLUDED, ALL EXPRESS AND
IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR USE, AND FITNESS FOR A PARTICULAR
PURPOSE ARE SPECIFICALLY EXCLUDED. IF, UNDER APPLICABLE STATE LAW, IMPLIED WARRANTIES MAY NOT VALIDLY BE
DISCLAIMED OR EXCLUDED, THE DURATION OF SUCH IMPLIED WARRANTIES IS LIMITED TO THE PERIOD(S) FROM THE DATE OF
PURCHASE SET FORTH BELOW. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS
WHICH VARY FROM STATE TO STATE.
The warranties given herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy
available to the purchaser and only for the time periods set forth herein. No other representations or promises made by anyone are
permitted. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all
liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims,
whether based on contract, negligence, strict liability or otherwise. Sharp does not warrant nor shall Sharp be liable, or in any way
responsible, for Products which have been subject to abuse (including, but not limited to, improper voltage), accident, misuse, negligence,
lack of reasonable care, alteration, modification, tampering, misuse, improper operation or maintenance or any damages or defects in the
Product which were caused by repairs or attempted repairs performed by anyone other than a Sharp authorized servicer. Nor shall Sharp
be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow limits on
warranties or on remedies for breach in certain transactions; in such states, the limits herein may not apply.
THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND PUERTO RICO.
Model Specific Section
Your Product Model Number & Description:
LC-19DV28UT/LC-22DV28UT Combination Liquid Crystal Television And
DVD/CD player (Be sure to have this information available when you need
service for your Product.)
Warranty Period for this Product:
One (1) year parts and labor from the date of purchase.
Additional Exclusions from
Warranty Coverage (if any):
In order for the Product to be serviced, the Product must be readily available
to the servicer, free and clear of any complex or non-standard installation,
mounting or other encumbrance which would unreasonably interfere with
servicing the Product. The Servicer will remount the Product after service,
provided that such remounting is not into a complex or non-standard installa-
tion. Any additional labor and materials required to remove and/or reinstall a
Product above and beyond the foregoing are not covered by this warranty,
may result in additional charges and are the responsibility of the consumer.
Image Retention resulting from a fixed image being displayed for long
periods of time is not covered by this Limited Warranty (see Operation
Manual on how to prevent this).
Where to Obtain Service:
From a Sharp Authorized Servicer located in the United States. To find the
location of the nearest Sharp Authorized Servicer, please call Sharp toll free
at 1-800-BE-SHARP.
What to do to Obtain Service:
Ship prepaid or carry in your Product to a Sharp Authorized Servicer. Be sure
to have proof of purchase available. If you ship the Product, be sure it is
insured and packaged securely. Please use two persons to carry the Product,
transport it in its original packaging, and ensure that the Product is covered
to avoid scratches and damage. Sharp shall not be responsible for lost,
stolen or misdirected mail or for damage to the product incurred during
shipping.
TO OBTAIN PRODUCT INFORMATION OR PURCHASE ACCESSORIES AND EXTENDED WARRANTIES, CALL 1-800-BE-SHARP
41
Download from Www.Somanuals.com. All Manuals Search And Download.
|