Thank you for purchasing this SHARP product.
To obtain the best performance from this product, please read this
manual carefully. It will guide you in operating your SHARP product.
XL-UH240 Micro Component System consisting of XL-UH240 (main unit)
and CP-UH240 (speaker system).
MICRO COMPONENT SYSTEM
MODEL
XL-UH240
OPERATION MANUAL
Accessories
Please confirm that the following accessories are included.
Remote control
1
AM loop antenna
1
FM antenna
1
(RRMCGA081AWSA) (QANTL0010AWZZ)
(92LFANT1535A)
Note:
Note:
Only the above accessories are included.
This product is not compatible with MTP and AAC file systems.
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS
XL-UH240
1 Read Instructions - All the safety and operating instructions should
10 Ventilation - Slots and openings in the cabinet are provided for venti-
lation and to ensure reliable operation of the product and to protect it
from overheating, and these openings must not be blocked or cov-
ered. The openings should never be blocked by placing the product on
a bed, sofa, rug, or other similar surface. This product should not be
placed in a built-in installation such as a bookcase or rack unless proper
ventilation is provided or the manufacturer’s instructions have been
adhered to.
be read before the product is operated.
2 Retain Instructions - The safety and operating instructions should be
retained for future reference.
3 Heed Warnings - All warnings on the product and in the operating
instructions should be adhered to.
4 Follow Instructions - All operating and use instructions should be
followed.
11 Power Sources - This product should be operated only from the type
of power source indicated on the marking label. If you are not sure of
the type of power supply to your home, consult your product dealer or
local power company. For products intended to operate from battery
power, or other sources, refer to the operating instructions.
5 Cleaning - Unplug this product from the wall outlet before cleaning.
Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
12 Grounding or Polarization - This product may be equipped with a
polarized alternating-current line plug (a plug having one blade wider
than the other). This plug will fit into the power outlet only one way.
This is a safety feature. If you are unable to insert the plug fully into the
outlet, try reversing the plug. If the plug should still fail to fit, contact
your electrician to replace your obsolete outlet. Do not defeat the safety
purpose of the polarized plug.
6 Attachments - Do not use attachments not recommended by the prod-
uct manufacturer as they may cause hazards.
7 Water and Moisture - Do not use this product near water - for ex-
ample, near a bath tub, wash bowl, kitchen sink, or laundry tub; in a
wet basement; or near a swimming pool; and the like.
8 Accessories - Do not place this product on an unstable cart, stand,
tripod, bracket, or table. The product may fall, causing serious injury to
a child or adult, and serious damage to the product. Use only with a
cart, stand, tripod, bracket, or table recommended by the manufac-
turer, or sold with the product. Any mounting of the product should
follow the manufacturer’s instructions, and should use a mounting ac-
cessory recommended by the manufacturer.
Alternate Warnings - This product is equipped with a three-wire
grounding-type plug, a plug having a third (grounding) pin. This plug
will only fit into a grounding-type power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet, contact your electri-
cian to replace your obsolete outlet. Do not defeat the safety purpose
of the grounding-type plug.
13 Power-Cord Protection - Power-supply cords should be routed so
that they are not likely to be walked on or pinched by items placed
upon or against them.
9 A product and cart combination should be moved with
care. Quick stops, excessive force, and uneven surfaces
may cause the product and cart combination to over-
turn.
14 Protective Attachment Plug - The product is equipped with an at-
tachment plug having overload protection. This is a safety feature. See
Instruction Manual for replacement or resetting of protective device. If
replacement of the plug is required, be sure the service technician has
used a replacement plug specified by the manufacturer that has the
same overload protection as the original plug.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-UH240
IMPORTANT SAFETY INSTRUCTIONS (continued)
15 Outdoor Antenna Grounding - If an outside antenna or cable system 19 Object and Liquid Entry - Never push objects of any kind into this
is connected to the product, be sure the antenna or cable system is
grounded so as to provide some protection against voltage surges and
built-up static charges.Article810 of the National Electrical Code, ANSI/
NFPA 70, provides information with regard to proper grounding of the
mast and supporting structure, grounding of the lead-in wire to an an-
tenna discharge unit, size of grounding conductors, location of antenna
discharge unit, connection to grounding electrodes, and requirements
for the grounding electrode.
product through openings as they may touch dangerous voltage points
or short-out parts that could result in a fire or electric shock. Never spill
liquid of any kind on the product.
20 Servicing - Do not attempt to service this product yourself as opening
or removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
21 Damage Requiring Service - Unplug this product from the wall outlet
and refer servicing to qualified service personnel under the following
conditions:
Example of antenna grounding as per
National Electrical Code, ANSI/NFPA 70
a) When the power-supply cord or plug is damaged,
b)If liquid has been spilled, or objects have fallen into the product,
c) If the product has been exposed to rain or water,
ANTENNA LEAD IN WIRE
GROUND
CLAMP
d)If the product does not operate normally by following the operating
instructions. Adjust only those controls that are covered by the op-
erating instructions as an improper adjustment of other controls may
result in damage and will often require extensive work by a qualified
technician to restore the product to its normal operation,
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
SERVICE
EQUIPMENT
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
e) If the product has been dropped or damaged in any way, and
GROUND CLAMPS
POWER SERVICE GROUNDING
ELECTRODE SYSTEM
(NEC ART 250, PART H)
f) When the product exhibits a distinct change in performance - this
indicates a need for service.
NEC - NATIONAL ELECTRICAL CODE
S2898A
22 Replacement Parts - When replacement parts are required, be sure
the service technician has used replacement parts specified by the
manufacturer or have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric shock, or other
hazards.
16 Lightning - For added protection for this product during a lightning
storm, or when it is left unattended and unused for long periods of
time, unplug it from the wall outlet and disconnect the antenna or cable
system. This will prevent damage to the product due to lightning and
power-line surges.
23 Safety Check - Upon completion of any service or repairs to this prod-
uct, ask the service technician to perform safety checks to determine
that the product is in proper operating condition.
17 Power Lines - An outside antenna system should not be located in the
vicinity of overhead power lines or other electric light or power circuits,
or where it can fall into such power lines or circuits. When installing an
outside antenna system, extreme care should be taken to keep from
touching such power lines or circuits as contact with them might be
fatal.
24 Wall or Ceiling Mounting - The product should be mounted to a wall
or ceiling only as recommended by the manufacturer.
25 Heat - The product should be situated away from heat sources such
as radiators, heat registers, stoves, or other products (including ampli-
fiers) that produce heat.
18 Overloading - Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or electric shock.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
XL-UH240
Page
ꢀ General Information
Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Controls and indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . .7 - 9
ENERGY STAR® Program Information
ꢀ Preparation for Use
System connections . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10 - 12
Remote control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Products that have earned
the ENERGY STAR® are
designed to protect the
environment through
ꢀ Basic Operation
General control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Setting the clock (Remote Control only) . . . . . . . . . . . . . . . . . 15
superior energy efficiency.
ꢀ CD or MP3/WMA disc Playback
Listening to a CD or MP3/WMA disc . . . . . . . . . . . . . . . . .16 - 18
Advanced CD or MP3/WMA disc playback . . . . . . . . . . . .19 - 20
Advanced CD playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
MP3/WMA folder mode (only for MP3/WMA files) . . . . . . .22 - 23
To comply with the ENERGY STAR® standards mentioned above,
please cancel the demonstration mode, as described on page12
.
ꢀ USB Memory Playback
Listening to USB mass storage device / MP3 Player . . .24 - 25
To remove USB memory device . . . . . . . . . . . . . . . . . . . . . . . . 25
Advanced USB playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 26
ENERGY STAR® is a U.S. registered mark.
ꢀ Radio
Listening to the radio . . . . . . . . . . . . . . . . . . . . . . . . . . . . .27 - 28
ꢀ Advanced Features
Timer and sleep operation (Remote Control only) . . . . . .29 - 32
Enhancing your system . . . . . . . . . . . . . . . . . . . . . . . . . . .33 - 34
ꢀ References
Troubleshooting chart . . . . . . . . . . . . . . . . . . . . . . . . . . . . .34 - 36
Maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
CONSUMER LIMITED WARRANTY . . . . . . . . . . . . . .Back cover
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
XL-UH240
ꢀ General
ꢁHold the AC power plug by the head when
removing it from the AC outlet, as pulling
the cord can damage internal wires.
ꢁPlease ensure that the equipment is positioned in a well-ventilated
area and ensure that there is at least 4" (10 cm) of free space
along the sides, top and back of the equipment.
4" (10 cm) 4" (10 cm)
4" (10 cm)
ꢁDo not remove the outer cover, as this
may result in electric shock. Refer
internal service to your local SHARP
service facility.
4" (10 cm)
ꢁUse the unit on a firm, level surface free from
vibration.
ꢁThis unit should only be used within the range of 41˚F - 95˚F
(5˚C - 35˚C).
PO
T
W
ANERDBY
ON/S
E
N
O
P
S
E
TU
(B
A
N
N
E
D
R
)
V
/
A
I
D
U
EO
X
CD
USB
Warning:
The voltage used must be the same as that specified on this unit. Us-
ing this product with a higher voltage other than that which is speci-
fied is dangerous and may result in a fire or other type of accident
causing damage. SHARP will not be held responsible for any dam-
age resulting from use of this unit with a voltage other than that which
is specified.
ꢁKeep the unit away from direct sunlight,
strong magnetic fields, excessive dust,
humidity and electronic/electrical equip-
ment (home computers, facsimiles, etc.)
which generate electrical noise.
PO
T
W
ANERDBY
ON/S
OP
O
E
S
/
E
CL
TU
A
N
N
E
D
R
)
V
/
A
I
D
U
EO
X
CD
(B
USB
ꢀ Volume control
ꢁDo not place anything on top of the unit.
The sound level at a given volume setting depends on speaker effi-
ciency, location and various other factors. It is advisable to avoid ex-
posure to high volume levels, which occurs while turning the unit on
with the volume control setting up high, or while continually listening
at high volumes.
ꢁDo not expose the unit to moisture, to temperatures higher than
140˚F (60˚C) or to extremely low temperatures.
ꢁIf your system does not work properly, disconnect the AC power
cord from the AC outlet. Plug the AC power cord back in, and then
turn on your system.
ꢁIn case of an electrical storm, unplug the
unit for safety.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls and indicators
XL-UH240
ꢀ Front panel
Reference page
1. Disc Trays . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
2. Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
3. Remote Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
4. Disc or USB Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
5. Disc or USB Play or Repeat Button . . . . . . . . . . . . . . . 16, 20
6. Power ON/STANDBY Button . . . . . . . . . . . . . . . . . . . . . . . . 14
7. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
8. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
9. Video/Auxiliary/USB Button . . . . . . . . . . . . . . . . . . . . . . . . 33
10. USB Terminal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
11. Headphone Jack . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 33
12. Volume Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
13. Disc Number Select Buttons . . . . . . . . . . . . . . . . . . . . . . . . 16
14. Disc Tray Open/Close Button . . . . . . . . . . . . . . . . . . . . . . . 16
7
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-UH240
Controls and indicators (continued)
ꢀ Display
Reference page
1
2
3
4
5
6 7
1. Disc Number Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
2. MP3/WMA Folder Indicator . . . . . . . . . . . . . . . . . . . . . . . . . 23
3. MP3/WMA Title Indicators . . . . . . . . . . . . . . . . . . . . . . . . . . 23
4. MP3 Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
5. WMA Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 17
6. Sleep Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
7. Timer Play Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
8. MP3/WMA Total Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 23
9. Daily Timer Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 30
10. FM Stereo Mode Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . 27
11. FM Stereo Receiving Indicator . . . . . . . . . . . . . . . . . . . . . . 27
12. Memory Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
13. Extra Bass Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
14. Disc or USB Repeat Play Indicator . . . . . . . . . . . . . . . . 20, 26
15. Disc or USB Pause Indicator . . . . . . . . . . . . . . . . . . . . . . . . 18
16. Disc or USB Play Indicator . . . . . . . . . . . . . . . . . . . . . . 17, 26
13 14
9 10 11
8
15
16
12
ꢀ Rear panel
Reference page
1. Speaker Terminals . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
2. AC Power Cord . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
3. FM 75 Ohms Antenna Jack . . . . . . . . . . . . . . . . . . . . . . . . . 11
4. AM Antenna Ground Terminal . . . . . . . . . . . . . . . . . . . . . . 11
5. AM Loop Antenna Terminal . . . . . . . . . . . . . . . . . . . . . . . . 11
6. Video/Auxiliary (Audio Signal) Input Jacks . . . . . . . . . . . . 33
7. Cooling Fan . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
8. Speaker Light-up Jacks . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
9. Subwoofer Pre-output Jack . . . . . . . . . . . . . . . . . . . . . . . . . 34
3
4
5
ANTENNA
FM
GND AM
75 OHMS
VIDEO/AUX IN
RIGHT LEFT
ꢀ Speaker system
1.Tweeter
6
7
8
SPEAKERS
RATED SPEAKER IMPEDANCE:
6 OHMS MIN.
2.Woofer
3.Bass Reflex Duct
1
2
3
4.Speaker Wire
5.Speaker Light-up Wire
1
2
AC INPUT
RIGHT
LEFT
9
4
5
8
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-UH240
ꢀ Remote control
1
2
Reference page
1. Remote Control Transmitter . . . . . . . . . . . . . . . . . . . . . . . . 13
2. Disc Number Select Buttons . . . . . . . . . . . . . . . . . . . . . . . . 16
3. Disc Direct Search Buttons . . . . . . . . . . . . . . . . . . . . . . . . . 19
4. Equalizer Mode Select Button . . . . . . . . . . . . . . . . . . . . . . 14
5. Extra Bass/Demo Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
6. Volume Up and Down Buttons . . . . . . . . . . . . . . . . . . . . . . 14
7. Power On/Stand-by Button . . . . . . . . . . . . . . . . . . . . . . . . . 14
8. CD Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
9. Tuner (Band) Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
10. Video/Auxiliary/USB Button . . . . . . . . . . . . . . . . . . . . . . . . 24
11. Disc Clear/Dimmer Button . . . . . . . . . . . . . . . . . . . . . . 14, 21
12. Disc Random Button . . . . . . . . . . . . . . . . . . . . . . . . . . . 20, 26
13. Disc Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
14. USB Stop Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
15. Memory Button . . . . . . . . . . . . . . . . . . . . . . . . . . 15, 21, 28, 32
16. Disc Pause Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 18
17. Disc Play or Repeat Button . . . . . . . . . . . . . . . . . . . . . . 16, 20
18. USB Play or Repeat Button . . . . . . . . . . . . . . . . . . . . . . . . . 24
19. Tuning Up Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
20. CD Track Up or Fast Forward, Tuner Preset Up,
11
12
13
14
15
16
17
7
8
9
18
10
19
20
21
22
3
23 24
Time Up Button . . . . . . . . . . . . . . . . . . . 15, 23, 24, 28, 29, 32
21. CD Track Down or Fast Reverse, Tuner Preset Down,
Time Down Button . . . . . . . . . . . . . . . . 15, 23, 24, 28, 29, 32
22. Tuning Down Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
23. Display Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 24
24. Folder Button . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23, 24
25. Clock/Timer Button . . . . . . . . . . . . . . . . . . . . . . . . . 15, 29, 32
4
5
6
25
9
Download from Www.Somanuals.com. All Manuals Search And Download.
System connections
XL-UH240
Make sure to unplug the AC power cord before any connections.
Antenna connection (see page 11)
FM antenna
AM loop antenna
Right speaker
Left speaker
ANTENNA
FM
GND AM
75 OHMS
VIDEO/AUX IN
RIGHT LEFT
SPEAKERS
RATED SPEAKER IMPEDANCE:
6 OHMS MIN.
AC INPUT
RIGHT
LEFT
Speaker light-up wire
Speaker light-up wire
AC outlet
(AC 120 V, 60 Hz)
Speaker connection (see page 11)
AC power connection (see page 12)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-UH240
ꢀ Antenna connection
ꢀ Speaker connection
Supplied FM antenna:
Connect the black wire to the minus (-) terminal, and the red wire to
the plus (+) terminal.
Connect the FM antenna wire to the FM 75 OHMS jack and position
the FM antenna wire in the direction where the strongest signal can
be received.
SPEAKERS
RATED SPEAKER IMPEDANCE:
6 OHMS MIN.
Supplied AM loop antenna:
ANTENNA
FM
G
N
D
A
M
7
5
O
H
M
S
VIDEO/AUX IN
Connect the AM loop antenna to the AM and GND terminals. Position
the AM loop antenna for optimum reception. Place the AM loop
antenna on a shelf, etc., or attach it to a stand or a wall with screws
(not supplied).
RIGHT
LEFT
SPEAKERS
RATED SPEAKER IMPEDANCE:
6
OHMS MIN.
RIGHT
LEFT
AC INPUT
RIGHT
LEFT
Red
Black
Caution:
ꢁUse speakers with an impedance of 6 ohms or more, as lower
impedance speakers can damage the unit.
ꢁDo not mistake the right and the left
ANTENNA
channels. The right speaker is the one on the
FM
GND
AM
SPEAKERS
PEDANCE:
.
RATED SPEAKER IM
IN
S M
6 OHM
right side when you face the unit.
ANTENNA
FM
G
N
D
A
M
75 OHMS
VIDEO/AUX IN
ꢁDo not let the bare speaker wires touch
RIGHT
LEFT
each other.
SPEAKERS
RATED SPEAKER IMPEDANCE:
75 OHMS
6
OHMS MIN.
ꢁDo not allow any objects to fall into or to be
placed in the bass reflex ducts.
AC INPUT
White
RIGHT
LEFT
Black
EFT
RIGHT
ꢁDo not stand or sit on the speakers. You may
be injured.
Incorrect
Note:
ꢀ Speaker Light-Up Connection
Placing the antenna on the unit or near the AC power cord may
cause noise pickup. Place the antenna away from the unit for better
reception.
Connect the speaker light-up wires to the SPEAKERS LIGHT-UP
jacks for speaker illumination. To turn off the speaker light-up
feature, press the CLEAR/DIMMER button on the remote control for
2 seconds or more.
Installing the AM loop antenna:
< Assembling >
< Attaching to the wall >
Wall Screws (not supplied)
Note:
Placing the right speaker light-up wire to the RIGHT jack and the left
speaker light-up wire to the LEFT jack.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
XL-UH240
System connections (continued)
ꢀ AC power connection
After checking all the connections have been made correctly, plug
the AC power cord of this unit into the AC outlet. If you plug in the unit
first, the unit will enter the demonstration mode.
ꢀ Demonstration mode
The first time the unit is plugged in, the
unit will enter the demonstration mode.
You will see words scroll.
To cancel the demonstration mode:
When the unit is in the power stand-
by mode (demonstration mode),
press the X-BASS/DEMO button.
The unit will enter the low power
consumption mode.
ANTENNA
FM
G
N
D
A
M
75 OHMS
VIDEO/AUX IN
RIGHT
LEFT
SPEAKERS
RATED SPEAKER IMPEDANCE:
6
OHMS MIN.
AC INPUT
RIGHT
LEFT
To return to the demonstration mode:
When the unit is in the power stand-by mode, press the X-BASS/
DEMO button again.
AC outlet
(AC 120 V, 60 Hz)
Note:
Note:
ꢁUnplug the AC power cord from the AC outlet if the unit will not be
When the power is on, the X-BASS/DEMO button can be used to se-
lect the extra bass mode.
in use for a prolonged period of time.
Cooling fan:
The main unit is built with a cooling fan at the rear of the unit for im-
proved cooling. Please do not cover the opening of the fan with any
obstacles, as this will block proper ventilation.
ꢀ Outdoor FM antenna
Use an outdoor FM antenna if you require better reception.
Consult your dealer.
ANTENNA
FM
GND
AM
ANTENNA
FM
GND AM
Outdoor
FM antenna
75 OHMS
VIDEO/AUX IN
RIGHT L
75 OHMS
S
P
E
A
K
E
RS
R
A
T
E
D
S
P
E
A
K
E
RI
M
P
E
D
A
N
CE:
6
O
H
M
SMIN
.
A
CI
N
P
UT
75 ohms
RI
G
H
T
L
E
FT
coaxial cable
Note:
When an outdoor FM antenna is used, disconnect the supplied FM
antenna wire.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
XL-UH240
Notes concerning use:
ꢁReplace the batteries if the operating distance is reduced or if the
operation becomes erratic.
ꢁPeriodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
ꢀ Battery installation
Use 2 "AA" size batteries (UM/SUM-3, R6, HP-7 or similar).
Batteries are not included.
ꢁExposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit if this
occurs.
ꢁKeep the remote control away from moisture, heat, shock, and
vibrations.
1
2
Open the battery cover.
Insert the batteries according to the direction indicated in
the battery compartment.
When inserting or removing the batteries, push them toward the
battery terminals.
Close the cover.
3
ꢀ Test of the remote control
Check the remote control after checking all the connections (see
pages 10 - 12).
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you
can enjoy music.
Precautions for battery use:
ꢁReplace all old batteries with new ones at the same time.
ꢁDo not mix old and new batteries.
ꢁRemove the batteries if the unit will not be used for long periods
of time. This will prevent potential damage due to battery leakage.
Caution:
ꢁDo not use rechargeable batteries (nickel-cadmium battery, etc.).
ꢁInstalling the batteries incorrectly may cause the unit to
malfunction.
Battery removal:
Open the battery cover and pull up the battery to take out.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
General control
XL-UH240
ꢀ Volume control
Main unit operation:
POWER
ON/STANDBY
When the VOLUME control is turned clockwise, the volume will
increase. When it is turned counterclockwise, the volume will
decrease.
Remote control operation:
Press the VOLUME (+ or -) button to increase or decrease the volume.
.....
0
30 MAXIMUM
ꢀ Bass control
When the power is first turned on, the unit will enter the extra bass
mode which emphasizes the bass frequencies, and "X-BASS" will
appear. To cancel the extra bass mode, press the X-BASS button
on the remote control
.
ꢀ To turn the power on
Press the ON/STAND-BY button to turn the power on.
ꢀ Equalizer
When the EQUALIZER MODE button is pressed, the current mode
setting will be displayed. To change to a different mode, press the
EQUALIZER MODE button repeatedly until the desired sound mode
appears.
After use:
Press the ON/STAND-BY button to enter the power stand-by mode.
FLAT
No equalization.
For rock music.
For classical music.
For pop music.
Vocals are enhanced.
For jazz.
ꢀ Illumination light control
When the power is turned on, ring around the volume control light
up. To turn on/off the light, hold down the CLEAR/DIMMER button
on the remote control for more than 2 seconds.
ROCK
CLASSIC
POPS
VOCAL
JAZZ
ꢀ Speaker light up control
The speaker will light up according to the level of the music source
played back. To turn on/off the light, hold down the CLEAR/DIMMER
button on the remote control for 2 seconds or more.
ꢀ Volume auto fade-in
If you turn off and on the main unit with the volume set to 27 or
higher, the volume starts at 16 and fades in to the last set level.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the clock (Remote Control only)
XL-UH240
5 Press the
or
button to adjust the hour and
then press the MEMORY button.
Press the
or
button once to advance the time by
1 hour. Hold it down to advance continuously.
6 Press the
or
button to adjust the minutes and
then press the MEMORY button.
In this example, the clock is set for the 12-hour (AM 12:00) display.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CLOCK/TIMER button.
Press the
or
button once to advance the time by
1 minute. Hold it down to change the time in 5-minute intervals.
To confirm the time display:
[When the unit is in the stand-by mode]
Press the CLOCK/TIMER button.
3 Within 10 seconds, press the
or
button to
select "CLOCK", and press the MEMORY button.
The time display will appear for about 10 seconds.
[When the power is on]
Press the CLOCK/TIMER button.
Within 10 seconds, press the
time.
or
button to display the
The time display will appear for about 10 seconds.
4 Press the
or
button to select 12-hour or 24-
hour display and then press the MEMORY button.
Note:
The "CLOCK" will appear or time will flash to confirm the time
display when the AC power supply is restored after a power failure
or unplugging the unit. If incorrect, readjust the clock as follows.
To readjust the clock:
"AM 12:00"
"AM 0:00"
"0:00"
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
The 12-hour display will appear.
(AM 0:00 - PM 11:59)
The 24-hour display will appear.
(0:00 - 23:59)
Perform "Setting the clock" from step 1. If the "CLOCK" does not
appear in step 3, step 4 (for selecting the 12-hour or 24-hour
display) will be skipped.
To change the 12-hour or 24-hour display:
1
Clear all the programmed contents. [Refer to "Clearing all the
memory (reset)" on page 35 for details.]
2
Perform "Setting the clock" from step 1.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to a CD or MP3/WMA disc
XL-UH240
This system can play back a standard CD, CD-R/RW in the CD format
and CD-R/RW with MP3 or WMA files, but cannot record on them.
Some audio CD-R and CD-RW discs may not be playable due to the
state of the disc or the device that was used for recording.
POWER
ON/STANDBY
MP3:
MP3 is a form of compression. It is an acronym which stands
for MPEG Audio Layer 3.
MP3 is a type of audio code which is processed by significant
compression from the original audio source with very little loss
in sound quality.
CD
OPEN/
CLOSE
ꢁThis system supports MPEG 1 Layer 3, MPEG 2 Layer 3, and
VBR files.
ꢁDuring VBR file playback, time counter in the display may differ
from its actual playback time.
WMA:
WMA files are Advanced System Format files that include audio
files which are compressed with Windows Media Audio codec.
WMA is developed by Microsoft as an audio format file for
Windows Media Player.
ꢁ"MP3" or "WMA" indicator will light up after the unit reads
information on an MP3 or WMA disc.
Auto power on function:
When you press any of the following buttons, the unit turns on.
ꢁCD button (main unit and remote control): The unit turns on and
the "CD" function is activated.
ꢁCD
playback starts (regardless of the last function).
button on the main unit: The unit turns on and playback of
the last function starts (CD,TUNER,VIDEO/AUX/USB).
/
button on the remote control: The unit turns on and CD
ꢁ
/
Auto power off function:
In the stop mode of CD, MP3 or WMA operation, the main unit enters
the stand-by mode after 15 minutes of inactivity.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-UH240
ꢀPlayback will begin from track 1 on DISC 1. After that disc
finishes playing, the next disc will automatically play.
ꢀAfter the last track on the fifth disc is played, the unit will stop
automatically.
ꢀWhen there is no disc in one of the disc trays (1 - 5), the empty
tray will be skipped to the next tray with a disc.
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CD button.
3 Press the
1 button and within 5 seconds, press the
OPEN/CLOSE button to open the disc tray 1.
4 Place the disc on the disc tray 1, label side up.
To exchange other discs while playing a disc:
Press one of the 1 - 5 buttons for the stopped disc and within 5
seconds, press the OPEN/CLOSE button and exchange discs.
Be sure to place 3" (8 cm) disc in the middle of the disc trays.
5" (12 cm)
3" (8 cm)
To remove the discs:
In the stop mode, press the 1 - 5 button and within 5 seconds,
press the OPEN/CLOSE button.
POWER
DBY
ON/STAN
OPEN/
CLOSE
VIDEO/
TUNER/
AUX/USB
(BAND)
CD
To skip to a desired disc:
Press one of the 1 - 5 buttons and within 5 seconds, press the
(CD ) button.
5 Press the OPEN/CLOSE button to close the disc tray 1.
MP3 indicator
Caution:
TOTAL indicator
WMA indicator
[CD]
[MP3/WMA]
ꢀDo not place two discs in one disc tray.
ꢀDo not play discs of special shapes (heart, octagon, etc).
It may cause malfunctions.
ꢀDo not push the disc tray while it is moving.
ꢀIf the power fails while the tray is open, wait until the power is
restored.
Total number of
tracks on the disc time of the disc of files
Total playing
Total number
ꢀIf the disc tray is stopped with force, "ER-CD20" will appear on the
display for 3 seconds and the unit will not function. If this occurs,
press the ON/STAND-BY button to enter the power stand-by
mode and then turn the power on again.
ꢀIf TV or radio interference occurs during CD operation, move the
unit away from the TV or radio.
ꢀDue to the structure of the disc information, it takes longer to
read an MP3/WMA disc than a normal CD (approximately 20
to 90 seconds).
6 You can place discs on the trays 2 - 5 by following steps
3 - 5.
ꢀIf a disc is damaged, dirty, or loaded upside down, the disc will be
skipped.
7 Press the
/
button to start playback.
Disc play indicator
Download from Www.Somanuals.com. All Manuals Search And Download.
17
XL-UH240
Listening to a CD or MP3/WMA disc (continued)
Notes for CD or MP3/WMA disc:
ꢀ Various disc functions
ꢁTrack up/track down is possible only within individual discs.
ꢁFast forward/fast reverse is possible only within individual discs.
ꢁWhen the end of the last track is reached during fast forward,
"END" will appear on the display and CD operation will be paused.
When the beginning of the first track is reached during fast
reverse, the unit will enter the playback mode.
Function
Main unit
Remote
control
Operation
Play
Press in the stop
mode.
ꢁRewritable discs which are not finished, can still be played.
Stop
Press in the playback
mode.
Pause
Press in the playback
mode. Press the
/
button to resume play-
back from the paused
point.
Track up/
Track down
Press in the playback
or stop mode.
If you press the button
in the stop mode,
press the
/
button
to start the desired
track.
Fast for-
ward/Fast
reverse
Press and hold down
in the playback mode.
Release the button to
resume playback.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced CD or MP3/WMA disc playback
XL-UH240
Notes:
ꢀ Direct track search
ꢁA track number higher than the number of tracks on the disc can-
By using the direct search buttons, the desired tracks on the current
disc can be played.
not be selected.
ꢁDuring random play, direct search is not possible.
Use the direct search buttons on
the remote control to select the de-
sired track while playing the se-
lected disc.
To stop playback:
Press the (CD ) button.
Selected track number
ꢁThe direct search buttons allow you to select up to number 9.
ꢁWhen selecting number 10 or higher, use the "+10" button.
A. For example, to choose 13
1 Press the "+10" button once.
2 Press the "1" button.
3 Press the "3" button.
B. For example, to choose 130
1 Press the "+10" button twice.
2 Press the "1" button.
3 Press the "3" button.
4 Press the "0" button.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-UH240
Advanced CD or MP3/WMA disc playback (continued)
ꢀ Repeat play
Repeat play can play one disc, all 5 discs or a programmed
sequence continuously.
ꢀ Random play
The tracks on the disc(s) can be played in random order automatically.
To random play all tracks on up to 5 discs:
To repeat one disc:
Press the RANDOM button on the remote control.
Press the
/
button twice.
To repeat all tracks on up to 5 discs:
Press the button three times.
/
To repeat desired tracks (CD only):
To cancel random play:
Perform steps 1 - 6 in "Programmed play" section on page 21 and
Press the
/
button.
then press the
/
button twice.
"R" will disappear.
Notes:
ꢁIf you press the
button during random play, you can move to
the track selected next by the random operation. On the other
hand, the button does not allow you to move to the previous
track. The beginning of the track being played will be located.
ꢁIn random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)
To cancel repeat play:
Press the button again until " " will disappear.
/
Caution:
After performing repeat, be sure to press the (CD ) button. Other-
wise, the disc(s) will play continuously.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced CD playback
XL-UH240
ꢀ Programmed play
To clear the programmed selections:
Press the CLEAR/DIMMER button on the re-
mote control while the "MEMORY" indicator
is flashing.
Each time the button is pressed, one track will
be cleared, beginning with the last track pro-
grammed.
You can choose up to 32 selections for playback in the order you like.
1 While in the stop mode, press the
MEMORY button on the remote
control to enter the programming
save mode.
To cancel the programmed play mode:
While in the stop mode and the "MEMORY" indicator is lit, press the
CLEAR/DIMMER button on the remote control. The "MEMORY" in-
dicator will disappear and all the programmed contents will be
cleared.
2 Press one of the 1 - 5 buttons
to select the desired disc.
Adding tracks to the program:
If a program has been previously stored, the "MEMORY" indicator
will be displayed. Then follow steps 1 - 6 to add tracks. The new
tracks will be stored after the last track of the original program.
Selected disc number
3 Press the direct search buttons
on the remote control to select
the desired track.
To check which tracks are programmed:
While the unit is stopped in the programmed play mode, press the
or
button.
Selected track number
You can also select a track by pressing the
or
button.
Notes:
ꢁWhen a disc with programmed tracks is ejected, the program is
automatically canceled.
ꢁEven if you press the ON/STAND-BY button to enter the stand-by
mode or change the function from CD to another, the programmed
selections will not be cleared.
4 Press the MEMORY button to
save the track number.
5 Repeat steps 2 - 4 for other tracks. Up to 32 tracks can be
programmed.
ꢁDuring the program operation, random play is not possible.
If you make a mistake, the programmed tracks can be cleared
by pressing the CLEAR/DIMMER button.
6 Press the (CD ) button.
The total number in memory will ap-
pear.
7 Press the
/
button to start playback.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3/WMA folder mode (only for MP3/WMA files)
XL-UH240
To playback MP3/WMA (Windows Media Audio) file
There are many music sites on the internet that you can download
MP3/WMA (Windows Media Audio) music files. Follow the
instructions from the website on how to download the music files.
You can then playback these downloaded music files by burning
them to a CD-R/RW disc or by connecting a USB Memory Player
device.
ꢁYour downloaded song/files are for personal use only. Any other
usage of the song without owner’s permission, is against the law.
ꢀ About folder playback order
If MP3/WMA files are recorded in several folders, a folder number will
be set to each folder automatically.
Folder mode on/off can be operated by the FOLDER button on the
remote control. Files that are played back in folder mode on differ
from those played back during folder mode off.
These folders can be selected by the FOLDER button on the remote
control. If there is no supported file formats inside the selected folder,
the folder is skipped and the next folder will be selected.
Example: How to set folder number if MP3/WMA format files are
recorded as below figure.
Folder Mode Off case:
All the files starting from the selected folder or file will be played back.
If file 3 inside Folder C is selected, all the files starting from file 3 will
be played back.
1. ROOT folder is set as folder 1.
Folder Mode On case:
2. As for folders inside ROOT folder (Folder A and Folder B), the
folder which is recorded earlier on the disc will be set as folder 2.
3. As for folder inside Folder A (Folder C and Folder D), folder which
is recorded earlier in disc order information will be set as folder
3.
All the files inside the selected folder will be played back.
In case Folder D is selected, file 4,5 and 6 will be played back. File 7
and 8 in Folder E will not be played back.
4. Because there is no folder in Folder C, Folder D will be set as
folder 4.
5. Folder E that is inside Folder D will be set as folder 5.
6. Folder B inside ROOT folder will be set as folder 6.
FILE 1
FILE 2
FILE 3
ROOT
FOLDER A
FOLDER C
(FOLDER 3)
(FOLDER 1)
(FOLDER 2)
FOLDER D
(FOLDER 4)
FILE 4
FILE 5
FILE 6
FOLDER E
(FOLDER 5)
* The folder and file order information which is recorded on the disc
depends on the writing software. There maybe possibilities that this
unit will playback the files not according to our expected playback
order.
FILE 7
FILE 8
FOLDER B
FILE 9
(FOLDER 6)
FILE 10
22
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-UH240
ꢀ Procedure to playback MP3/WMA disc
To playback CD-R/RW.
4 Select desired file to be played back by pressing the
or
button. (Folder mode off)
1 Press the CD button, and load a MP3/WMA disc.
ꢁ
After disc is loaded, disc info will be displayed.
MP3 indicator
WMA indicator
5
Press the
/
(CD
/
) button.
Disc Name
Playback will start and file name will be displayed.
TOTAL indicator
Total number of files
ꢁ
ꢁ
Title, Artist & Album name is displayed if it is recorded on the disc.
Display content can be changed by pressing the DISPLAY button.
Disc 1 Blinking
TITLE-1 Indicator
File Name Display
Function Display
Title Display
ꢁ
ꢁ
In case folder is selected, proceed to step 2.
In case file is selected, proceed to step 4.
2 Press the FOLDER button, and press the TUNING ( or
)
(
1)
button to select desired playback folder. (Folder mode on)
TITLE-2 Indicator
TITLE-3 Indicator
Artist Display
FOLDER indicator
(
2)
(
1)
Clock Display
Album Display
FOLDER number
Total files in Folder 3
ꢁ
ꢁ
To start playback with folder mode on, go to step 5.
To change the playback folder, press the TUNING ( or
select another folder.
)
to
In case of playback with the folder mode on, press the TUNING (
or
)
button, and the folder can be selected eventhough it is
3 Select desired file to be played back by pressing the
playback/pause mode.
or
button. Proceed to step 5.
It will continue playback/pause mode in the 1st track of the selected
folder.
(
(
1) MP3 ID3-Tag only support version 1.x.
2) Only appears when clock is already set.
Note:
ꢁIf "NO SUPPORT" is displayed, it means "Copyright protected
WMA file" or "Not supported playback file" is selected.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-UH240
Listening to USB mass storage device / MP3 Player
1 Press the VIDEO/AUX/USB (USB/AUX) button, and push up
the USB door. Connect the USB Memory device that has
MP3/WMA format files on the unit.
VIDEO
/AUX
USB
When the USB memory is connected to the main unit, the
device information will be displayed.
MP3 indicator
WMA indicator
Volume ID
TOTAL indicator
Total number of files
ꢀIn case folder is selected, proceed to step 2.
ꢀIn case file is selected, proceed to step 4.
2 Press the FOLDER button, and press the TUNING ( or
)
button to select desired playback folder. (Folder mode on)
FOLDER indicator
FOLDER number
Total files in Folder 2
Note:
This product is not compatible with MTP and AAC file systems.
ꢀTo start playback with folder on mode, go to step 5.
ꢀTo change the playback folder, press the TUNING ( or ) but-
ton to select another folder.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
To remove USB memory device
XL-UH240
1 Press the USB
button on remote control. Wait until
"UNPLUG OK" appears on FL display.
3 Select desired file to be played back by pressing the
or
button. Proceed to step 5.
4 Select desired file to be played back by pressing the
or
button. (Folder mode off)
2 Disconnect USB memory device from the USB terminal.
5
Press the
/
(USB
/
) button.
Playback will start and the file name will be displayed.
ꢀTitle, Artist & Album name are displayed if they are recorded in
the USB memory device.
Display content can be changed by pressing the DISPLAY button.
ꢀ
TITLE-1 Indicator
File Name Display
Title Display
Notes:
(
1)
ꢀSHARP will not be held liable for the loss of data while the USB
memory device is connected to the audio system.
ꢀThis USB memory’s format supports FAT16 or FAT32.
TITLE-2 Indicator
TITLE-3 Indicator
Function Display
Artist Display
ꢀSharp cannot guarantee that all USB memory devices will work
on this audio system.
(
2)
(
1)
ꢀThis USB memory cannot be operated via USB hub.
Clock Display
Album Display
ꢀIf "NO SUPPORT" is displayed, it means "Copyright protected
WMA file" or "Not supported playback file" is selected.
ꢀIn case the data inside the USB memory is large, it may take
longer time for data to be read.
ꢀ
ꢀ
(
(
1) MP3 ID3-Tag only supports version 1.x.
2) Only appears when clock is already set.
ꢀThe USB terminal in this unit is not intended for a PC connection
but is used for music streaming with a USB memory device.
Note:
To pause playback:
Press the CD button.
Auto power off function:
In the stop mode of USB operation, the main unit enters the stand-by
mode after 15 minutes of inactivity.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced USB playback
XL-UH240
Note:
) When folder mode is on, the selected playmode can be used for
the files in the selected folder only.
ꢀ Repeat play
Repeat play can play all tracks sequence continuously.
(
To repeat all tracks:
Notes:
Press the
/
button twice.
ꢁThis unit only supports "MPEG-1 Audio Layer-3" format.
(Sampling Frequency fs is 32, 44.1, 48kHz)
"MPEG-2 Audio Layer-3" , "MPEG-2.5 Audio Layer-3" and MP1,
MP2 format are not supported.
ꢁProgramme playback for USB memory is not available.
ꢁPlayback order for MP3 files may differ sometimes depending on
To cancel repeat play:
Press the button again until " " will disappear.
the writing software used during file download.
/
ꢁBitrate which is supported by MP3 is 32~320 kbps, WMA is
64~160 kbps.
ꢀ Random play
The tracks can be played in random order automatically.
ꢁFor MP3/WMA files, please put ".MP3" ".WMA" extension. Files
cannot be played back if there is no MP3/WMA extension.
To random play all tracks:
Press the RANDOM button on the remote control.
ꢁPlaylist are not supported by this unit.
ꢁThis unit can displayed Folder Name or File Name up to 32
characters.
ꢁThis unit only supports MP3 ID3-Tag version 1.x.
ꢁThe display playback time may not be displayed correctly when
playing back a variable bitrate file.
ꢁTime display cannot be changed by the DISPLAY button.
To cancel random play:
ꢁTitle name and artist name can be displayed by pressing the
DISPLAY button during file playback or pause mode.
Press the
/
button.
"R" will disappear.
ꢁWMA meta tag also supports title, artist and album name which
Notes:
are recorded in WMA files.
ꢁIf you press the
button during random play, you can move to
the track selected next by the random operation. On the other
hand, the
ꢁCopyright protected WMA files cannot be played back.
button does not allow you to move to the previous
track. The beginning of the track being played will be located.
ꢁIn random play, the unit will select and play tracks automatically.
(You cannot select the order of the tracks.)
Caution:
After performing repeat, be sure to press the (USB ) button.
Otherwise, it will play continuously.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the radio
XL-UH240
ꢀ Tuning
1 Press the ON/STAND-BY button to turn the power on.
2 Press the TUNER (BAND) button repeatedly to select the
POWER
ON/STANDBY
desired frequency band (FM or AM).
3 Press the TUNING ( or ) button on the remote control to
tune in to the desired station.
Manual tuning:
Press the TUNING ( or ) button as many times as required
to tune in to the desired station.
TUNER
(BAND)
Auto tuning:
When the TUNING ( or ) button is pressed for more than 0.5
seconds, scanning will start automatically and the tuner will
stop at the first receivable broadcast station.
Notes:
ꢁWhen radio interference occurs, auto scan tuning may stop auto-
matically at that point.
ꢁAuto scan tuning will skip weak signal stations.
ꢁTo stop the auto tuning, press the TUNING ( or ) button again.
To receive an FM stereo transmission:
Press the TUNER (BAND) button to display the "ST" indicator.
ꢁ" " will appear when an FM broadcast is in stereo.
ꢁIf the FM reception is weak, press the TUNER (BAND) button to
extinguish the "ST" indicator. The reception changes to monaural,
and the sound becomes clearer.
FM stereo mode indicator
Auto power on function:
When you press any of the following buttons, the unit turns on.
ꢁTUNER (BAND) button (main unit and remote control): The unit
turns on and the "TUNER" function is activated.
ꢁ
/
button on the main unit: The unit turns on and playback of
FM stereo receiving indicator
the last function starts (CD,TUNER,VIDEO/AUX/USB).
27
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-UH240
Listening to the radio (continued)
ꢀ Memorizing a station
You can store 40 AM and FM stations in memory and recall them at
the push of a button. (Preset tuning)
ꢀ To recall a memorized station
Press the PRESET ( or ) button for less than 0.5 seconds to se-
lect the desired station.
ꢀ To scan the preset stations
The stations saved in memory can be scanned automatically. (Pre-
set memory scan)
1 Perform steps 1 - 3 in "Tuning" on page 27.
2 Press the MEMORY button to enter the preset tuning sav-
ing mode.
1
Press the PRESET
(
or
)
button for more than 0.5 seconds.
The preset number will flash and the programmed stations will be
tuned in sequentially, for 5 seconds each.
2
Press the PRESET ( or ) button again when the desired sta-
tion is located.
3 Within 30 seconds, press the PRESET ( or ) button to
select the preset channel number.
Store the stations in memory, in order, starting with preset
channel 1.
4 Within 30 seconds, press the MEMORY button to store that
station in memory.
ꢀ To erase entire preset memory
If the "MEMORY" and preset number indicators go out before
the station is memorized, repeat the operation from step 2.
1
Press the ON/STAND-BY button to enter the stand-by mode.
While pressing down the 1 button and the 5 button, press
the TUNER (BAND) button until "TUNER CLEAR" appears.
2
5 Repeat steps 1 - 4 to set other stations, or to change a pre-
set station.
When a new station is stored in memory, the station previously
memorized for that preset channel number will be erased.
Note:
The backup function protects the memorized stations for a few
hours should there be a power failure or the AC power cord become
disconnected.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer and sleep operation (Remote Control only)
XL-UH240
Timer playback:
The unit turns on and plays the desired source (CD, TUNER, USB,
AUX) at a preset time.
This unit has 2 types of timer: ONCE TIMER and DAILY TIMER.
Once timer: Once timer play works for one time only at a preset
time.
Daily timer: Daily timer play works at the same preset time
every day.
For example, set the timer as a wake-up call every morning.
ꢀ Timer playback
Before setting timer:
Using the once timer and daily timer in combination:
For example, use the once timer to record a radio program, and use
the daily timer to wake up.
1 Check that the clock is set to the correct time (refer to page 15).
If it is not set, you cannot use the timer function.
2 For timer playback: Load discs to be played.
1
2
Set the daily timer (pages 29 - 31).
Set the once timer (pages 29 - 31).
1 minute or more
Daily timer
1 Press the ON/STAND-BY button to turn the power on.
2 Press the CLOCK/TIMER button.
Once timer
Start
Note:
Stop
Start
Stop
3 Within 10 seconds, press the
or
button to
select "ONCE" or "DAILY", and press the MEMORY button.
When set times for the daily timer and once timer overlap, the once
timer takes priority. Allow an interval of at least 1 minute between
operations.
Set the clock to the correct time if "ONCE" or "DAILY" does not
appear.
Continued to the next page
29
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-UH240
Timer and sleep operation (Remote Control only) (continued)
4 Within 10 seconds, press the
or
button to
8 Switch input with the
or
button, and then
select "ONCE SET" or "DAILY SET", and press the
MEMORY button.
press the MEMORY button.
To select the timer playback source: CD, TUNER, USB or AUX.
ꢁWhen you select the tuner, select a station by pressing the
or
button, and then press the MEMORY
button.
ꢁIf a station has not been programmed, "NO PRESET" will be
displayed and timer setting will be canceled.
5 Press the
or
button to adjust the hour and
then press the MEMORY button.
9 Adjust the volume using the VOLUME control, and then
press the MEMORY button.
Do not turn the volume up too high.
10Press the ON/STAND-BY button to enter the power stand-
The illustrations show the timer playback setting in the daily
timer mode.
by mode.
The "TIMER" indicator lights up and the unit is ready for timer
playback.
6 Press the
or
button to adjust the minutes and
then press the MEMORY button.
7 Set the time to finish as in steps 5 and 6 above.
Continued to the next page
30
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-UH240
Checking the timer setting in the timer stand-by mode:
11When the preset time is reached, playback will start.
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
The volume will increase gradually until it reaches the preset
volume.
"ONCE" or "DAILY", and press the MEMORY button.
3 Within 10 seconds, press the or button to select
12When the timer end time is reached, the system will enter
"ONCE CALL" or "DAILY CALL", and press the MEMORY button.
The unit returns to the timer stand-by mode after displaying the
settings in order.
the power stand-by mode automatically.
Once timer:
Canceling the timer setting in the timer stand-by mode:
The timer will be canceled.
Daily timer:
1 Press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
"ONCE" or "DAILY", and press the MEMORY button.
The timer will operate at the same time every day. It will
continue until the daily timer setting is canceled. Cancel the
daily timer when it is not in use.
3 Within 10 seconds, press the or button to select
"ONCE OFF" or "DAILY OFF", and press the MEMORY button.
Timer will be canceled (the setting will not be canceled).
Note:
Reusing the memorized timer setting:
The timer setting will be memorized once it is entered. To reuse the
same setting, perform the following operations.
When performing timer playback using another unit connected to the
USB terminal or AUX IN jacks, select "USB" or "AUX" in step 8.
This unit will turn on or enter the power stand-by mode automatically,
however, the connected unit to AUX IN jacks will not turn on or off.
1 Turn the power on and press the CLOCK/TIMER button.
2 Within 10 seconds, press the
or
button to select
"ONCE" or "DAILY", and press the MEMORY button.
3 Within 10 seconds, press the or button to select
"ONCE ON" or "DAILY ON", and press the MEMORY button.
4 Press the ON/STAND-BY button to enter the power stand-by
mode.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-UH240
Timer and sleep operation (Remote Control only) (continued)
To cancel the sleep operation:
ꢀ Sleep operation
Press the ON/STAND-BY button while "SLEEP" is indicated.
The radio, compact disc and USB can all be turned off automatically.
1 Play back the desired sound source.
2 Press the CLOCK/TIMER button.
To cancel the sleep operation without setting the unit to the stand-by
mode, proceed as follows.
1
2
While "SLEEP" is indicated, press the CLOCK/TIMER button.
Within 10 seconds, press the or button to select
"SLEEP OFF", and press the MEMORY button.
3 Within 10 seconds, press the
or
button to select
"SLEEP", and press the
MEMORY button.
ꢀ To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and wake up
to CD in the next morning.
4 Press the
or
button to select the time.
(Maximum: 3 hours - Minimum: 1 minute)
ꢁ3 hours - 5 minutes 5-minute intervals
ꢁ5 minutes - 1 minute 1-minute intervals
1
2
Set the sleep time (see left, steps 1 - 5).
5 Press the MEMORY button.
While the sleep timer is set, set the timer playback
(steps 2 - 10, pages 29 - 30).
"SLEEP" will appear.
Sleep timer setting
1 minute - 3 hours
Timer playback setting
Desired time
Timer playback start time
End time
6 The unit will enter the power stand-by mode automatically
after the preset time has elapsed.
The volume will be turned down 1 minute before the sleep
operation finishes.
Sleep operation will
automatically stop.
To confirm the remaining sleep time:
1
2
While "SLEEP" is indicated, press the CLOCK/TIMER button.
Within 10 seconds, press the
"SLEEP X : XX".
or
button to select
"X : XX" is sleep remaining time.
ꢁThe remaining sleep time is displayed for about 10 seconds.
ꢁYou can change the remaining sleep time while it is displayed by
pressing the MEMORY button (steps 4 - 5).
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Enhancing your system
XL-UH240
The connection cord is not included. Purchase a commercially
available cord as shown below.
ꢀ Listening to the playback sounds from VCR,
DVD, etc.
1 Use a connection cord to connect the VCR, DVD, etc. to the
VIDEO/AUX IN jacks.
VIDEO/AUX IN
RIGHT
LEFT
When using video equipment, connect the audio output to this
unit and the video output to a television.
2 Press the ON/STAND-BY button to turn the power on.
3 Press the VIDEO/AUX/USB button.
ANTENNA
FM
G
N
D
A
M
75 OHMS
VIDEO/AUX IN
RIGHT
LEFT
4 Play the connected equipment.
ANCE:
Note:
AC INPUT
To prevent noise interference, place the unit away from the
television.
RIGHT
LEFT
ꢀ Headphones
TUNER
(BAND)
CD
ꢁBefore plugging in or unplugging the headphones, reduce the
volume.
ꢁBe sure your headphones have a 1/8" (3.5 mm) diameter plug and
impedance between 16 and 50 ohms. The recommended
impedance is 32 ohms.
ꢁPlugging in the headphones disconnects the speakers
automatically. Adjust the volume using the VOLUME control.
Auto power on function:
When you press any of the following buttons, the unit turns on.
ꢁVIDEO/AUX/USB button (main unit and remote control): The unit
turns on and the "USB" or "AUX" function is activated.
ꢁ
/
button on the main unit: The unit turns on and playback of
the last function starts (CD,TUNER,VIDEO/AUX/USB).
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting chart
XL-UH240
Enhancing your system (continued)
Many potential problems can be resolved by the owner without call-
ing a service technician.
If something is wrong with this product, check the following before
calling your authorized SHARP dealer or service center.
ꢀ Subwoofer connection
When a commercially available subwoofer with a built-in amplifier is
connected to this unit, you can enjoy sound with emphasized bass.
Connect an RCA cord from a commercially available speaker with a
built-in amplifier to the SUBWOOFER PRE-OUT jack.
ꢀ General
Symptom
ꢁThe clock is not set to the ꢁDid a power failure occur? Reset
correct time. the clock.
ꢁWhen a button is pressed, ꢁSet the unit to the power stand-
Possible cause
the unit does not respond.
by mode and then turn it back on.
ANTENNA
FM
G
N
D
A
M
ꢁIf the unit still malfunctions, reset
75 OHMS
VIDEO/AUX IN
RIGHT
LEFT
it.
SPEAKERS
RATED SPEAKER IMPEDANCE:
ꢁNo sound is heard.
ꢁIs the volume level set to "0"?
6
OHMS MIN.
ꢁAre the headphones connected?
AC INPUT
RIGHT
LEFT
ꢁAre the speaker wires
disconnected?
ꢀ CD player
Symptom
Possible cause
Subwoofer with a
built-in amplifier
ꢁPlayback does not start. ꢁIs the disc loaded upside down?
ꢁPlayback stops in the ꢁDoes the disc satisfy the
middle or is not performed
properly.
standards?
ꢁIs the disc distorted or
scratched?
ꢁPlayback sounds are
skipped, or stopped in the
middle of a track.
ꢁIs the unit located near excessive
vibrations?
ꢁIs the disc very dirty?
ꢁHas condensation formed inside
the unit?
34
Download from Www.Somanuals.com. All Manuals Search And Download.
XL-UH240
ꢀ Remote control
ꢀ If trouble occurs
When this product is subjected to strong external interference
(mechanical shock, excessive static electricity, abnormal supply
voltage due to lightning, etc.) or if it is operated incorrectly, it may
malfunction.
Symptom
Possible cause
ꢁThe remote control does ꢁIs the AC power cord of the unit
not operate.
plugged in?
If such a problem occurs, do the following:
ꢁIs the battery polarity correct?
ꢁAre the batteries dead?
1
2
Set the unit to the stand-by mode and turn the power on again.
If the unit is not restored in the previous operation, unplug and
plug in the unit, and then turn the power on.
ꢁIs the distance or angle
incorrect?
Note:
If neither operation above restores the unit, clear all the memory by
resetting it.
ꢁDoes the remote control sensor
receive strong light?
ꢀ Clearing all the memory (reset)
1
Press the ON/STAND-BY button to enter the power stand-by
mode.
ꢀ Tuner
2
While pressing down the
the POWER ON/STANDBY button until "CLEAR ALL" appears.
1 button and the 5 button, press
Symptom
Possible cause
ꢁThe radio makes unusual ꢁIs the unit placed near the TV or
noises continuously.
computer?
ꢁIs the FM antenna or AM loop
antenna placed properly? Move
the antenna away from the AC
power cord if it's located nearby.
POWER
ON/STANDBY
Caution:
ꢀ Condensation
Sudden temperature changes, storage or operation in an extremely
humid environment may cause condensation inside the cabinet (CD
pickup, etc.) or on the transmitter on the remote control.
This operation will erase all data stored in memory including clock,
timer settings, tuner preset, and CD program.
Condensation can cause the unit to malfunction. If this happens,
leave the power on with no disc in the unit until normal playback is
possible (about 1 hour). Wipe off any condensation on the transmitter
with a soft cloth before operating the unit.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Maintenance
XL-UH240
Troubleshooting chart (continued)
ꢀ Cleaning the CD pickup lens
ꢀ Before transporting the unit
Remove all CDs from the unit. Make sure there is no CD in the disc
tray. Then, set the unit to the power stand-by mode. Carrying the
unit with discs left inside can damage the unit.
In order to ensure proper operation of the CD player, preventative
maintenance (cleaning of the laser pickup lens) should be
performed periodically. Lens cleaners are commercially available.
Contact your local CD software dealer for options.
ꢀ Care of compact discs
ꢀ Cleaning the cabinet
Compact discs are fairly resistant to damage, however mistracking
can occur due to an accumulation of dirt on the disc surface. Follow
the guidelines below for maximum enjoyment from your CD
collection and player.
Periodically wipe the cabinet with a soft cloth and a diluted soap
solution, then with a dry cloth.
Caution:
ꢁDo not use chemicals for cleaning (gasoline, paint thinner, etc.). It
may damage the cabinet finish.
ꢁDo not write on either side of the disc, particularly the non-label
side from which signals are read. Do not mark this surface.
ꢁKeep your discs away from direct sunlight, heat, and excessive
moisture.
ꢁDo not apply oil to the inside of the unit. It may cause
malfunctions.
ꢁAlways hold the CDs by the edges. Fingerprints, dirt, or water on
the CDs can cause noise or mistracking. If a CD is dirty or does
not play properly, clean it with a soft, dry cloth, wiping straight out
from the center, along the radius.
NO
YES
Correct
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
XL-UH240
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
ꢀ CD player
Type
Signal readout
5-disc multi-play compact disc player
Non-contact, 3-beam semiconductor laser
pickup
ꢀ General
Power source
Power
consumption
D/A converter
Frequency
response
1-bit D/A converter
20 - 20,000 Hz
AC 120 V, 60 Hz
90 W
Dynamic range
90 dB (1 kHz)
Dimensions
Width: 6-3/4" (175 mm)
Height: 9-1/2" (240 mm)
Depth: 12-1/5" (315 mm)
ꢀ Tuner
Weight
12.4 lbs. (5.6 kg)
Frequency range
FM: 87.5 - 108 MHz
AM: 530 - 1,720 kHz
ꢀ Amplifier
Output power
90 watts minimum RMS per channel into 6
ohms from 100 Hz to 20 kHz, 10% total har-
monic distortion
ꢀ Speaker
Output terminals
Speakers: 6 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Subwoofer pre-out (audio signal):
200 mV/10 k ohms at 70 Hz
Video/Auxiliary (audio signal):
500 mV/47 k ohms
Type
2-way type light-up speaker system
2" (5 cm) tweeter
5-1/8" (13 cm) woofer
180 W
Maximum input
power
Input terminals
Rated input power 90 W
Impedance
Dimensions
6 ohms
ꢀ USB
Class
Support File
Format support
Bitrate support
Width: 6-1/2" (165 mm)
Height: 10-1/4" (260 mm)
Depth: 9-5/8" (245 mm)
Mass storage class
MP3/WMA (do not support DRM file)
FAT 16 or FAT 32
MP3 (32 ~ 320 kbps)
WMA (64 ~ 160 kbps)
Weight
5.5 lbs. (2.5 kg/each)
Other
MP3 lD3 - tag only supports version 1.x
USB supports version 2.0
37
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the "Product"), when shipped in its original con-
tainer, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or part thereof
with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any Product the exterior of which has
been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal service or handling, or which has been altered or modified in
design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED WARRANTIES INCLUDING
THE WARRANTIES OF MERCHANTABILITYAND FITNESS FOR USEARE LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW.
Some states do not allow limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein, or to extend the duration of any
warranties beyond the time period described herein on behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy available to the purchaser.
Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the
purchaser with respect to the Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event
shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone
other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or property damage. Some states
do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO STATE.
Model Specific Section
XL-UH240 Micro Component System
Your Product Model Number & Description:
(Be sure to have this information available when you need service for your Product.)
Warranty Period for this Product
:
One (1) year parts and labor from the date of purchase.
Additional Item(s) Excluded from Warranty Coverage (if any):
Non-functional accessories, supplies, and consumable items.
Where to Obtain Service:
At a Sharp Authorized Servicer located in the United States.
To find a location of the nearest SharpAuthorized Servicer, call Sharp toll free at 1-800-BE-SHARP.
What to do to Obtain Service:
Ship prepaid or carry in your Product to a Sharp Authorized Servicer.
Be sure to have Proof of Purchase available. If you ship the Product, be sure it is insured and
packaged securely.
TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP.
SHARP ELECTRONICS CORPORATION
Printed in Malaysia
TINSEA121AWZZ
06A R AS 2
Sharp Plaza, Mahwah, New Jersey 07430-2135
SHARP CORPORATION
Download from Www.Somanuals.com. All Manuals Search And Download.
|