ENGLISH
MODEL
XL-UH12H
MICRO COMPONENT SYSTEM
OPERATION MANUAL
Thank you for purchasing this SHARP product. To obtain the best performance from this product, please read this
manual carefully. It will guide you in operating your SHARP product.
●
XL-UH12H Micro Component System consisting of XL-UH12H (main unit) and CP-UH12H (speaker system).
Accessories
Volume control
Please confirm that the following accessories are included.
The sound level at a given volume setting depends on
speaker efficiency, location and various other factors. It is
advisable to avoid exposure to high volume levels. Do not
turn the volume on to full at switch on. Listen to music at
moderate levels. Excessive sound pressure from
earphones and headphones can cause hearing loss.
Remote control x 1
(92L850RC35E004)
“AAA” size battery
(UM/SUM-4, R03, HP-16
or similar) x 2
Special note
Supply of this product does not convey a license nor imply any right to distribute content created with this product in revenue-
generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue generating streaming
applications (via Internet, intranets and/or other networks), other revenue-generating content distribution systems (pay-
audio or audio-on-demand applications and the like) or on revenue-generating physical media (compact discs, digital
versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for such use is
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
SHARP ELECTRONICS (Europe) GmbH
Sonninstraße 3, D-20097 Hamburg
12F R MW 1
92LEUH12H015RR
Download from Www.Somanuals.com. All Manuals Search And Download.
Precautions
●
Hold the AC power plug by the head when removing it
from the wall socket, as pulling the lead can damage
internal wires.
The AC power plug is used as a disconnect device and
shall always remain readily operable.
Do not remove the outer cover, as this may result
in electric shock. Refer internal service to your
local SHARP service facility.
The ventilation should not be impeded by covering the
ventilation openings with items, such as newspapers,
tablecloths, curtains, etc.
■
General
●
Please ensure that the equipment is positioned in a
well ventilated area and ensure that there is at least 10
cm (4") of free space along the sides, top and back of
the equipment.
●
●
10 cm (4") 10 cm (4")
10 cm (4")
●
●
●
●
●
No naked flame sources, such as lighted candles,
should be placed on the apparatus.
Attention should be drawn to the environmental
aspects of battery disposal.
This unit should only be used within the range of 5°C -
35°C (41°F - 95°F).
The apparatus is designed for use in moderate
climates.
10 cm (4")
●
●
Use the unit on a firm, level surface free from vibration.
Keep the unit away from direct sunlight, strong
magnetic fields, excessive dust, humidity and
electronic/electrical equipment (home computers,
facsimiles, etc.) which generate electrical noise.
Do not place anything on top of the unit.
●
●
Warning:
The voltage used must be the same as that specified on
this unit. Using this product with a higher voltage other
than that which is specified is dangerous and may result
in a fire or other type of accident causing damage. SHARP
will not be held responsible for any damage resulting from
use of this unit with a voltage other than that which is
specified.
Do not expose the unit to moisture, to temperatures
higher than
temperatures.
60°C (140°F) or to extremely low
●
●
If your system does not work properly, disconnect the
AC power lead from the wall socket. Plug the AC power
lead back in, and then turn on your system.
In case of an electrical storm, unplug the unit for safety.
System connection
Make sure to unplug the AC power lead before making any connections.
Right
Left
speaker
speaker
Red
Black
FM aerial
Wall socket
(AC 220 - 240 V ~ 50/60 Hz)
E-2
Download from Www.Somanuals.com. All Manuals Search And Download.
System connection (continued)
■
Speaker connection
■
AC power connection
After checking all the connections have been made
correctly, plug the AC power lead of this unit into the wall
socket. If you plug in the unit first, the unit will enter the
stand-by mode.
●
Connect the black wire to the minus
(–) terminal, and the red wire to the
plus (+) terminal.
Use speakers with an impedance of
8 ohms or more, as lower
impedance speakers can damage
the unit.
Do not mistake the right and the left
channels. The right speaker is the
one on the right side when you face
the unit.
RIGHT
RIGHT
LEFT
LEFT
●
Note:
Unplug the AC power lead from the wall socket if the unit
will not be in use for a prolonged period of time.
●
SPEAKERS
Incorrect
●
●
Do not let the bare speaker wires touch each other.
Do not allow any objects to fall into or to be placed in the
bass reflex ducts.
●
Do not stand or sit on the speakers. You may be injured.
Remote control
●
Remove the batteries if the unit will not be used for a
long period of time. This will prevent potential damage
due to battery leakage.
Do not use rechargeable batteries (nickel-cadmium
battery, etc.).
Installing the batteries incorrectly may cause the unit to
malfunction.
Batteries (battery pack or batteries installed) shall not
be exposed to excessive heat such as sunshine, fire or
the like.
■
Battery installation
Open the battery cover.
Insert the batteries according to the direction indicated
in the battery compartment.
When inserting or removing the batteries, push them
towards the (–) battery terminals.
Close the cover.
1
2
●
●
●
3
Notes concerning use:
●
Replace the batteries if the operating distance is
reduced or if the operation becomes erratic. Purchase
2 “AAA” size batteries (UM/SUM-4, R03, HP-16 or
similar).
●
●
Periodically clean the transmitter on the remote control
and the sensor on the unit with a soft cloth.
Exposing the sensor on the unit to strong light may
interfere with operation. Change the lighting or the
direction of the unit if this occurs.
Caution:
●
Replace all old batteries with new ones at the same
time.
●
Do not mix old and new batteries.
●
Keep the remote control away from moisture, heat,
shock, and vibrations.
General Control
ON/STAND-BY
■
To turn the power on
Press the ON/STAND-BY button to turn the power on.
VOLUME
After use:
Press the ON/STAND-BY button to enter the power stand-
by mode.
■
Volume auto set-in
●
If you turn off and on the main unit with volume set to
16 or higher, the volume will start at 16.
●
If you turn the unit off then on again with the volume
level set to less than 16, it will turn on again at the level
set.
■
Volume control
Turn the volume knob towards VOLUME +/– (on main unit)
or press VOL +/– (on remote control) to increase or
decrease the volume.
E-3
Download from Www.Somanuals.com. All Manuals Search And Download.
General Control (continued)
Listening to a CD or MP3/WMA disc
■
Extra bass control (X-BASS)
Press and hold down (X-BASS)/EQ button, the unit will
enter the extra bass mode which emphasises the bass
frequencies and “X-BASS” indicator will light up.
To cancel the extra bass mode, press and hold down
(X-BASS)/EQ button again.
■
Equaliser
Press (X-BASS)/EQ button, the current mode setting will
be displayed. To change to a different mode, press the (X-
BASS)/EQ button repeatedly until the desired sound
mode appears.
No equalisation.
No equalization.
FLAT
For rock music.
For rock music.
ROCK
For classical music.
For classical music.
CLASSIC
POPS
For pop music.
For pop music.
Vocals are enhanced.
Vocals are enhanced.
VOCAL
For jazz.
For jazz.
JAZZ
■
Auto power off function
The main unit will enter the stand-by mode after 15
minutes of inactivity during:
CD / USB: In the stop or pause mode.
AUDIO IN: No detection of input signal or very low sound
audibility.
■
Disc playback
■
Muting
1 Press the ON/STAND-BY button to turn the power on.
2 Press the FUNCTION button repeatedly to select CD
The volume is muted temporarily when pressing the
button on the remote control. Press again to restore the
volume.
function.
3 Press the OPEN/CLOSE button on the remote control
or
button on the main unit to open the disc tray.
4 Place the disc on the disc tray, label side up.
■
Function
When the FUNCTION button is pressed, the current
function will change to different mode. Press the
FUNCTION button repeatedly to select desired function.
CD
USB
FM ST
AUDIO IN
FM MONO
Note:
The backup function will protect the memorized function
mode for a few hours should there be a power failure or the
AC power lead becomes disconnected.
5 Press the OPEN/CLOSE button or button to close the
disc tray.
6 Press the
/
button to start playback. After the last
track is played, the unit will stop automatically.
Notes for CD or MP3/WMA disc:
When the end of the last track is reached during fast
forward, the CD operation will be stopped. When the
beginning of the first track is reached during fast reverse,
the unit will enter the playback mode.
E-4
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to a CD or MP3/WMA disc (continued)
■
Various disc functions
■
Repeat play
Repeat play can play one track, all tracks or a programmed
sequence continuously.
Function
Main
unit
Remote
control
Operation
To repeat one track:
Play
Press in the stop mode.
Press the PLAY MODE button repeatedly until “REP ONE”
appears. Indicator
1 will light up. Press the
/
button.
To repeat all tracks:
Press the PLAY MODE button repeatedly until “REP ALL”
appears. Indicator will light up. Press the button.
To repeat all desired tracks:
Stop
Press in the playback
mode.
/
Perform steps 1 - 6 in “Programmed play” section on page
6 and then press the PLAY MODE button until “REP ALL”
Pause
Press in the playback
appears. Indicator
will light up. Press the
/
button.
mode. Press the
button to resume
playback from the
paused point.
/
To cancel repeat play:
Press the PLAY MODE button again until “NORMAL”
appears. Indicator “ 1” or “ ” disappears.
Track up/
down
Press in the playback or
stop mode.
If you press the button
in the stop mode, press
the
/
button to start
the desired track.
Fast
forward/
reverse
Press and hold down in
the playback mode.
Release the button to
resume playback.
■
Random play
The tracks on the disc can be played in random order
automatically.
■
Direct track search
To random play all tracks:
Press and hold down PLAY MODE button on the remote
control until “RDM ON” appears and “RDM” icon light up.
By using the Direct Search buttons, the desired tracks on
the current disc can be played.
Use the Direct Search buttons on the remote control to
select the desired track whilst playing the selected
disc.
Press the
/
button.
To cancel random play:
Press and hold down the PLAY MODE button until “RDM
OFF” appears. “RDM” icon will disappear.
●
The Direct Search buttons allow you to select up to
number 9.
●
When selecting number 10 or higher, use the “10+”
button.
A. For example, to choose 13
1 Press the “10+” button once.
2 Press the “1” button.
3 Press the “3” button.
Selected track number
Notes:
B. For example, to choose 130
1 Press the “10+” button twice.
2 Press the “1” button.
3 Press the “3” button.
4 Press the “0” button.
Notes:
●
●
●
During random playback, repeat function is not
possible.
Playback will stop after all the tracks is played
randomly.
If you press the
button during random play, you can
move to the track selected next by the random opera-
tion. On the other hand, the
you to move to the previous track.
button does not allow
●
A track number higher than the number of tracks on the
disc cannot be selected.
During random play, direct search is not possible.
●
In random play, the unit will select and play tracks
automatically. (You cannot select the order of the
tracks.)
●
To stop playback:
Press the button on the main unit or remote control.
E-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to a CD or MP3/WMA disc (continued)
■
Procedure to playback CD or MP3/WMA
disc with folder mode off
■
Programmed play (CD or MP3/WMA with
folder mode off)
You can choose up to 32 selections for playback in the
order you like.
1 Select the CD function, and load a CD or an MP3/WMA
disc. After disc is loaded, disc info will be displayed.
1 Whilst in the stop mode, press the MEMORY button on
the remote control to enter the programming save
mode.
2 Select desired file to be played back by pressing the
or
button.
3 Press the
●
/
button. Playback will start.
Title, Artist and Album name are displayed if they are
recorded on the disc.
●
Display content can be changed by pressing the
(CLEAR)/DISP button.
Note:
2 Press the
or
button to select the desired track.
If the track is skipped during playback, it means “Copyright
protected WMA file” or “Not supported playback file” is
selected.
■
Procedure to playback MP3/WMA disc with
folder mode on
Selected track number
To play back CD-R/RW.
3 Press the MEMORY button to save the track number.
1 Select the CD function, and load an MP3/WMA disc.
After disc is loaded, disc info will be displayed. Press the
FOLDER button.
TOTAL
indicator
4 Repeat steps 2 - 3 for other tracks. Up to 32 tracks can
be programmed. If you make a mistake, press the
MEMORY button repeatedly to select the wrong track
then press the (CLEAR)/DISP button.
Total number of files
2 Press the PRESET ( or ) button, to select desired
playback folder. (Folder mode on)
5 Press the
/
button to start playback.
6 Press the
appear.
button. The total number in memory will
Folder number
Total files in Folder 3
3 Select desired file to be played back by pressing the
To cancel the programmed play mode:
Whilst in the stop mode and the “MEMORY” indicator is lit,
or
button.
button. Playback will start.
4 Press the
/
press again the
button on the remote control. The
●
Folder name, File name, Title, Artist and Album
name are displayed if they are recorded on the disc.
Press the PRESET ( or ) button, and the folder
can be selected even though it is in playback mode.
It will continue playback mode in the 1st track of the
“MEMORY” indicator will disappear and all the
programmed contents will be cleared.
●
Adding tracks to the programme:
If
a
programme has been previously stored, the
selected folder.
Display content can be changed by pressing the
“MEMORY” indicator will be displayed. Follow steps 1 - 4
to add tracks. The new tracks will be stored after the last
track of the previous programme.
●
(CLEAR)/DISP button.
Folder name display
File name display
Title display
Counter display
Artist display
Album display
E-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to a CD or MP3/WMA disc
(continued)
Listening to USB mass storage
device/MP3 player
■
Programmed play (MP3/WMA with folder
mode on)
You can choose up to 32 selections for playback in the
order you like.
1 Whilst in the stop mode, press the MEMORY button on
the remote control to enter the programming save
mode.
2 Press the PRESET (
or
) button to select the
or button to select
desired folder then press the
the desired track.
Selected track number
Note:
This USB mass storage device or MP3 player is not
compatible with MTP and AAC file systems.
3 Press the MEMORY button to save the track number.
■
To play back USB/MP3 player
1 Press the FUNCTION button repeatedly to select USB
function. Connect the USB memory device that has
MP3/WMA format files on the unit. When the USB
memory is connected to the main unit, the device
information will be displayed.
4 Repeat steps 2 - 3 for other tracks. Up to 32 tracks can
be programmed.
5 Press the
/
button to start playback.
2 Select desired file to be played back by pressing the
or
button.
6 During programmed playback, press
programmed playback. The total number in memory will
appear.
button to stop
3 Press the
/
button. Playback will start.
●
File name, Title, Artist and Album name are
displayed if they are recorded in the USB memory
device.
Notes:
●
When a disc is ejected, the programme is automatically
cancelled.
●
Display content can be changed by pressing the
(CLEAR) DISP button.
●
If you press the ON/STAND-BY button to enter the
stand-by mode or change the function from CD to
another, the programmed selections will be cleared.
During the programme operation, random play is not
possible.
Note:
To pause playback:
Press the button.
/
●
The following functions are the same as CD operation:
Page
Direct track search . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Repeat play . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Random play. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .5
Playback . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Programmed play . . . . . . . . . . . . . . . . . . . . . . . . . . . . .6
Note:
If USB memory device is not connected, “NO MEDIA” will
be shown on the display.
E-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to USB mass storage device/MP3 player (continued)
●
This product can play WMA and MP3 files. It will
■
To remove USB memory device
automatically detect the file type being played. If
unplayable file is played on this product, the file will be
automatically skipped. This will take a few seconds. If
abnormal indications appear on the display due to the
unspecified file, turn off the unit and then turn it on
again.
1 Press the button to stop playback.
2 Press the
button again and wait until “OK” is
displayed.
●
This product relates to USB mass storage devices and
MP3 players. It may however face some irregularities
due to various unforeseen reasons from some devices.
Should this happen, turn off the unit and then turn it on
again.
●
●
●
●
●
●
The USB port is only intended for direct connection to
a USB memory device without any cable.
This unit only supports “MPEG-1 Audio Layer-3”
format. (Sampling Frequency is 32, 44.1, 48kHz)
“MPEG-2 Audio Layer-3”, “MPEG-2.5 Audio Layer-3”
and MP1, MP2 format are not supported.
Playback order for MP3 files may differ depending on
the writing software used during file download.
Bitrate which is supported by MP3 is 32~320 kbps,
WMA is 64~160 kbps.
For MP3/WMA files, please put “.MP3” “.WMA”
extension. Files cannot be played back if there is no
MP3/WMA extension.
Playlists are not supported on this unit.
This unit can display Folder Name or File Name up to
16 characters.
Maximum total number of MP3/WMA files is 65280.
Maximum total number of folders is 255 inclusive of
root directory.
Folders with non playable files are also counted.
The display playback time may not be displayed
correctly when playing back a variable bitrate file.
The ID3TAG information supported are TITLE, ARTIST
and ALBUM only. Title name, artist name and album
name can be displayed by pressing the DISPLAY
button during file playback or pause mode.
3 Disconnect USB memory device from the USB terminal.
Notes:
●
SHARP will not be held liable for the loss of data whilst
the USB memory device is connected to the audio
system.
●
Files compressed in MP3 and/or WMA format can be
played back when connected to the USB terminal.
●
●
●
●
This USB memory’s format supports FAT 16 or FAT 32.
SHARP cannot guarantee that all USB memory
devices will work on this audio system.
●
●
USB cable is not recommended for use in this audio
system to connect to USB memory device. Use of the
USB cable will affect the performance of this audio
system.
●
●
●
●
This USB memory cannot be operated via USB hub.
The USB terminal in this unit is not intended for a PC
connection but is used for music streaming with a USB
memory device.
●
●
●
External HDD-storage cannot be played back via USB
terminal.
●
WMA meta tag also supports title, artist and album
name which are recorded in WMA files. Copyright
protected WMA files cannot be played back.
If the data inside the USB memory is large, it may take
longer time for the data to be read.
Listening to the radio
■
Tuning
1 Press the ON/STAND-BY button to turn the power on.
2 Press the FUNCTION button repeatedly to select FM
ST (FM stereo) or FM Mono.
3 Manual and Auto tuning to the desired station.
●
●
Manual tuning:
Press the TUNING ( or ) button on the remote
control repeatedly to tune in to the desired station.
Auto tuning:
When the TUNING ( or ) button on the remote
control is pressed for more than 0.5 seconds,
scanning will start automatically and the tuner will
stop at the first receivable broadcast station. Press
the button again to stop the auto tuning.
Notes:
●
When radio interference occurs, auto scan tuning may
stop automatically at that point.
●
Auto scan tuning will skip weak signal stations.
E-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the radio (continued)
Using the Radio Data System (RDS)
To receive an FM stereo transmission:
RDS is
a
broadcasting service which
a
growing
●
Press the FUNCTION button to select FM ST (FM
number of FM stations provide. These FM stations
send additional signals along with their regular
programme signals. They send their station names,
and information about the type of programme such as
sport, music, etc.
When tuned to an RDS station, “RDS” and the station
name will be displayed.
“PTYI” (Dynamic PTY Indicator) will appear whilst the
STEREO) mode and “ST” indicator will be displayed.
“
” will appear when an FM broadcast is in stereo.
●
If the FM reception is weak, press the FUNCTION
button to extinguish the “ST” indicator. The reception
changes to monaural, and the sound becomes clearer.
■
Memorising a station
Dynamic PTY station is received.
You can store 40 FM stations in memory and recall them
at the push of a button. (Preset tuning)
1 Perform steps 2 - 3 in “Tuning”.
2 Press the MEMORY button.
You can control the RDS by using the buttons on the
remote control only.
3 Within 5 seconds, press the PRESET ( or ) button
to select the preset channel number. Store the stations
in memory, in order, starting with preset channel 1.
■
Information provided by RDS
Each time the RDS DISPLAY button is pressed, the
display will switch as follows:
4 Press the MEMORY button to store that station in
memory. If the “MEMORY” and preset number
indicators disappear before the station is memorised,
repeat the operation from step 2.
Station name (PS)
Programme type (PTY)
5 Repeat steps 1 - 4 to set other stations, or to change a
preset station. When a new station is stored in the
memory, the station previously memorised for that
preset channel number will be erased.
Note:
Frequency
The backup function protects the memorised stations for a
few hours should there be a power failure or the AC power
lead become disconnected.
Radio text (RT)
When tuning in to a station other than an RDS station or
to an RDS station which sends weak signal, the display
will change in the following order:
■
To recall a memorised station
Press the PRESET ( or ) button for less than 0.5
NO PS
NO PTY
NO RT
seconds to select the desired station.
■
To scan the preset stations
FM 98.80 MHz
The stations saved in the memory can be scanned
automatically. (Preset memory scan)
■
Using the Auto Station Programme
Memory (ASPM)
1 Press the PRESET ( or ) button for more than 0.5
seconds. The preset number will flash and the
programmed stations will be tuned in sequentially, for 5
seconds each.
Whilst in the ASPM operation mode, the tuner will
automatically search for new RDS stations. Up to 40
stations can be stored.
If you have already stored some stations in memory, the
number of new stations you can store will be less.
2 Press the PRESET ( or ) button again when the
desired station is located.
1 Press the FUNCTION button repeatedly to select
TUNER function.
■
To erase entire preset memory
2 Press and hold down the RDS (ASPM) button on the
1 Press and hold down the (CLEAR)/DISP button until
“TUN CLR” appears.
remote control for at least 3 seconds.
1
After “ASPM” has flashed for about 4 seconds,
scanning will start (87.50 - 108.00 MHz).
E-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Radio Data System (RDS) (continued)
2
When an RDS station is found, “RDS” will appear
for a short time and the station will be stored in
memory.
■
To recall stations in memory
To specify programmed types and select stations
(PTY search):
You can search a station by specifying the programme type
(news, sports, traffic programme, etc.) from the stations in
memory.
1 Press the FUNCTION button repeatly to select TUNER
3
After scanning, the number of stations stored in
memory will be displayed for 4 seconds, and then
“END” will appear for 4 seconds.
function.
2 Press the RDS PTY button on the remote control.
To stop the ASPM operation before it is complete:
Press the RDS (ASPM) button whilst it is scanning for
stations. The stations which are already stored in memory
will be kept there.
Selected PTY code (blinking) will appear for about 6
seconds.
3 Within 6 seconds, press the
or
button to select
Notes:
the PTY code.
●
Any station which has the same frequency as the one
stored in memory will not be stored.
●
If 40 stations have already been stored in memory, the
scan will be aborted. If you want to redo the ASPM
operation, erase the preset memory.
●
●
●
●
If no station have been stored in memory, “00 MEM”
and “END” will appear for about 4 seconds.
If the RDS signals are very weak, station names may
not be stored in memory.
The same station name can be stored in different
channels.
Each time the button is pressed, the PTY code will
appear.
4 Whilst the selected PTY code is displayed (within 6
seconds), press the RDS PTY button again.
In a certain area or during certain time periods, the
station names may temporarily be different.
■
Notes for RDS operation
If any of the following events occur, it does not mean
that the unit is faulty:
●
●
The unit searches the all preset stations and stops
when it finds a station of the selected category then
tunes into the stations. The RDS indicator lights up.
●
“PS”, “NO PS” and a station name appear alternately,
and the unit does not operate properly.
If a particular station is not broadcasting properly or a
station is conducting tests, the RDS reception function
may not work properly.
If no programme is found in the all preset stations,
“NO PTY” appear on the display and returns to the
previous station.
●
●
●
When you receive an RDS station whose signal is too
weak, information like the station name may not be
displayed.
“NO PS”, “NO PTY” or “NO RT” will be displayed for
about few seconds, and then the frequency will be
displayed.
Notes:
●
If the display has stopped flashing, start again from
step 2. If the unit finds a desired programme type, the
corresponding channel number will lit for about 4
seconds, and then the station name will remain lit.
If you want to listen to the same programme type of
another station, press the RDS PTY button and start
again from step 2. The unit will look for the next station.
●
Notes for radio text:
●
The first 8 characters of the radio text will appear for 4
seconds and then they will scroll across the display.
If you tune in to an RDS station which is not
broadcasting any radio text, “NO RT” will be displayed
when you switch to the radio text position.
●
●
Whilst radio text data is received or when the text
contents change, “RT” will be displayed.
E-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting the clock (Remote control
only)
Timer and sleep operation (Remote
control only)
Timer playback:
The unit turns on and plays the desired source (CD, USB,
TUNER or AUDIO IN) at a preset time.
■
Timer playback
Before setting timer:
1
Check that the clock is set to the correct time (refer to
page 10).
If it is not set, you cannot use the timer function.
2
For timer playback, load the disc to be played back.
1
Press ON/STAND-BY button to turn the power on.
2
Press and hold (TIMER)/CLOCK button for about 2
seconds.
In this example, the clock is set for the 24-hour (00:00)
3
Within 10 seconds, press the
select “ONCE” or “DAILY” and then press the
MEMORY button.
or
button to
display.
1 Press the ON/STAND-BY button to turn to stand-by
mode.
2 Press and hold the (TIMER)/CLOCK button until
“00:00” appear.
4
Press the
MEMORY button.
or
button to set hour then press the
3 Within 10 seconds, press the
adjust the hour and then press the MEMORY button.
Press the or button once to advance the time
by 1 hour. Hold it down to advance continuously.
4 Press the or button to adjust the minutes and
then press the MEMORY button. Press the or
or
button to
5
6
Press the
press the MEMORY button.
or
button to set minute and then
button once to advance the time by 1 minute. Hold it
down to advance continuously.
To confirm the time display:
[When the unit is in the stand-by mode]
Press the (TIMER)/CLOCK button. The time display will
Press the
the MEMORY button.
or
button to set hour and then press
appear for about 5 seconds.
[When the power is on]
Press the (TIMER)/CLOCK button. The time display will
appear for about 5 seconds.
7
8
Press the
press the MEMORY button.
or
button to set minute and then
Note:
The “00:00” will appear when the AC power supply is
restored after a power failure or unplugging the unit.
Readjust the clock as follows.
To readjust the clock:
Perform “Setting the clock” from step 1.
Press the
or
button to select wake up source
(CD, USB, TUNER, AUDIO IN) then press the
MEMORY button.
When you select TUNER, select a preset station by
pressing the
MEMORY button. If
programmed, timer setting will be canceled.
or
button, and then press the
a
station has not been
E-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer and sleep operation (Remote control only) (continued)
To confirm the remaining sleep time:
1 Whilst “SLEEP” is indicated, press the SLEEP button.
The remaining time is displayed for about 10 seconds.
9
Adjust the volume using
MEMORY button. (Do not turn the volume too high).
or
and then press the
To cancel the sleep operation:
Press the ON/STAND-BY button whilst “SLEEP” is
indicated. To cancel the sleep operation without setting the
unit to the stand-by mode, proceed as follows.
10 If “TUNER” is selected, press the MEMORY button to
enter the preset selection mode.
1 Whilst “SLEEP” is indicated, press the SLEEP button.
2 Within 10 seconds, press the SLEEP button repeatedly
until “SLEEP” indicator disappears.
11 To select a preset channel number, press the
or
button and then press the MEMORY button.
■
To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and
wake up to CD in the next morning.
12 The “ ” or “ DAILY” indicator lights up.
1 Set the sleep time (see above, steps 1 - 5).
13 Press the ON/STAND-BY button to enter the power
stand-by mode. The TIMER LED indicator light up and
the unit is ready for timer playback.
2 Whilst the sleep timer is set, set the timer playback
(steps 2 - 10, page 11).
14 When the preset time is reached, playback will start.
“
” indicator will blink to show timer playback. The
Sleep timer setting Timer playback setting
End time
volume will increase gradually until it reaches the
preset volume level.
10 - 90 minutes
Desired time
15 When the timer end time is reached, the system will
enter the power stand-by mode automatically.
Timer playback
start time
Sleep operation will
automatically stop
Note:
This unit will turn on or enter the power stand-by mode
automatically. However, the connected unit will not turn on
or off. To stop the timer playback, follow step “Cancelling
the timer setting” of this page.
Checking the timer setting:
1
Press the (TIMER)/CLOCK button repeatedly to view
the TIMER ON and TIMER OFF setting.
Cancelling the timer setting:
Press and hold down the (TIMER)/CLOCK button until
“ONCE” or “DAILY” appears then press MEMORY button.
The unit display shows “OFF”.
■
Sleep operation
The radio, compact disc, USB and AUDIO IN can all be
turned off automatically.
1 Play back the desired sound source.
2 Press the SLEEP button.
3 Within 10 seconds, press the SLEEP button repeatedly
to select the time.
90
80
70
...
20
10
4 “SLEEP” will appear.
5 The unit will enter the power stand-by mode
automatically after the preset time has elapsed.
E-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Enhancing your system
Troubleshooting chart
The connection lead is not included. Purchase
commercially available lead as shown below.
a
Many potential problems can be resolved by the owner without
calling a service technician.
If something is wrong with this product, check the following before
calling your authorised SHARP dealer or service centre.
■
General
Symptom
Possible cause
●
●
The clock is not set
●
Did a power failure occur?
Reset the clock.
to the correct time.
(Refer page 10)
When a button is
pressed, the unit
does not respond.
●
●
Set the unit to the power
stand-by mode and then
turn it back on.
If the unit still malfunctions,
reset it. (Refer page 14)
Portable
audio
player, etc.
●
No sound is heard.
●
●
●
Is the volume level set to
“MIN”?
Are the headphones
connected?
Are the speaker wires
disconnected?
Audio cable
(not supplied)
■
CD player
Symptom
■
Listening to the playback sounds of
portable audio player, etc.
Possible cause
●
●
Playback does not
start.
Playback stops in
the middle or is not
performed properly.
●
●
●
Is the disc loaded upside
down?
1 Use a connection lead to connect the portable audio
Does the disc satisfy the
standards?
player etc. to the AUDIO IN socket.
Is the disc distorted or
scratched?
2 Press the ON/STAND-BY button to turn the power on.
3 Press the FUNCTION button repeatedly to select
●
Playback sounds are
skipped, or stopped
in the middle of a
track.
●
Is the unit located near
excessive vibrations?
Is the disc very dirty?
Has condensation formed
inside the unit?
AUDIO IN function.
●
●
4 Play the connected equipment. If volume level of the
connected device is too high, sound distortion may
occur. Should this happen, lower the volume of the
connected device. If volume level is too low, increase the
volume of the connected device.
■
Remote control
Symptom
Possible cause
Note:
To prevent noise interference, place the unit away from the
television.
●
The remote control
●
●
Is the AC power lead of the
unit plugged in?
does not operate.
Is the battery polarity
correct?
■
Headphones
●
●
Are the batteries dead?
Is the distance or angle
incorrect?
Does the remote control
sensor receive strong
light?
●
Do not turn the volume on to full at switch on and listen
to music at moderate levels. Excessive sound pressure
from earphones and headphones can cause hearing
loss.
●
●
●
Before plugging in or unplugging the headphones,
reduce the volume.
■
Tuner
Be sure your headphones have a 3.5 mm (1/8")
diameter plug and impedance between 16 and 50
ohms. The recommended impedance is 32 ohms.
Plugging in the headphones disconnects the speakers
automatically. Adjust the volume using the VOLUME
control.
Symptom
Possible cause
●
●
The radio makes
unusual noises
continuously.
●
●
Is the unit placed near the
TV or computer?
Is the FM aerial placed
properly? Move the aerial
away from the AC power
lead if it is located nearby.
E-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting chart (continued)
■
USB
■
Before transporting the unit
Remove the USB memory device and disc from the unit.
Then, set the unit to the power stand-by mode. Carrying
the unit with the USB memory device or disc left inside can
damage the unit.
Symptom
Device cannot be
detected.
Possible cause
●
●
●
Is there any MP3/WMA file
available?
Is the device properly
connected?
Is it an MTP device?
Does the device contain AAC
file only?
■
Care of compact discs
●
●
Compact discs are fairly resistant to damage, however
mistracking can occur due to an accumulation of dirt on the
disc surface. Follow the guidelines below for maximum
enjoyment from your CD collection and player.
●
Playback does not
start.
●
Is it a copyright protected
WMA file?
Is it a false MP3 file?
●
●
●
Do not write on either side of the disc, particularly the
non-label side from which signals are read. Do not
mark this surface.
●
●
Wrong time
display.
Wrong file name
display.
Is Variable Bitrate file being
played back?
Is the File Name written in
Chinese or Japanese
characters?
●
●
●
Keep your discs away from direct sunlight, heat, and
excessive moisture.
Always hold the CDs by the edges. Fingerprints, dirt, or
water on the CDs can cause noise or mistracking. If a
CD is dirty or does not play properly, clean it with a soft,
dry cloth, wiping straight out from the centre, along the
radius.
■
Condensation
Sudden temperature changes, storage or operation in an
extremely humid environment may cause condensation
inside the cabinet (CD pickup, etc.) or on the transmitter on
the remote control. Condensation can cause the unit to
malfunction. If this happens, leave the power on with no
disc in the unit until normal playback is possible (about 1
hour). Wipe off any condensation on the transmitter with a
soft cloth before operating the unit.
NO
YES
Correct
■
If problem occurs
When this product is subjected to strong external
interference (mechanical shock, excessive static
electricity, abnormal supply voltage due to lightning, etc.)
or if it is operated incorrectly, it may malfunction.
Maintenance
If such a problem occurs, do the following:
1 Set the unit to the stand-by mode and turn the power on
again.
2 If the unit is not restored in the previous operation,
unplug and plug in the unit again, and then turn the
power on.
■
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted
soap solution, then with a dry cloth.
Caution:
●
●
Do not use chemicals for cleaning (petrol, paint thinner,
etc.). It may damage the cabinet.
Do not apply oil to the inside of the unit. It may cause
malfunctions.
Note:
If neither operation above restores the unit, clear all the
memory by resetting it.
■
Factory reset, clearing all memory
1 Press the ON/STAND-BY button to turn the power on.
2 Press the FUNCTION button repeatedly to select
AUDIO IN function.
3 Press the
button on the main unit then press and
button until “RESET” appears.
hold down the
/
Caution:
This operation will erase all data stored in memory
including clock, timer settings, tuner preset, and CD
programme.
E-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
As part of our policy of continuous improvement, SHARP
reserves the right to make design and specification
changes for product improvement without prior notice. The
performance specification figures indicated are nominal
values of production units. There may be some deviations
from these values in individual units.
■
USB
USB host
interface
●
●
Complies with USB 1.1 (Full
Speed)/ 2.0 Mass Storage Class.
Support Bulk only and CBI
protocol.
■
General
Support file
Bitrate support
Other
●
●
MPEG 1 Layer 3
WMA (Non DRM)
Power source AC 220 - 240 V ~ 50/60 Hz
Power Power on: 18 W
consumption Power stand-by: 0.4 W (*)
●
●
MP3 (32 ~ 320 kbps)
WMA (64 ~ 160 kbps)
●
●
Maximum total number of MP3/
WMA files is 65280.
Maximum total number of folders
is 255 INCLUSIVE of root
directory.
The ID3TAG information
supported are TITLE, ARTIST and
ALBUM only.
Supports ID3TAG version 1 and
version 2.
Dimensions
Width: 180 mm (7 - 3/32")
Height: 121 mm (4 - 49/64")
Depth: 239 mm (9 - 13/32")
●
Weight
1.60 kg (3.53 lbs.)
(*) This power consumption value is obtained when the
●
●
main unit is in stand-by mode.
File system
support
Support USB devices with
Microsoft Windows/DOS/FAT 12/
FAT 16/ FAT 32.
■
Amplifier
Output power MPO: 16 W (8 W + 8 W) (10% T.H.D.)
●
2 kbyte block length for sector.
RMS: 10 W (5 W + 5 W) (10% T.H.D.)
Output
terminals
Speakers: 8 ohms
■
Tuner
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Frequency range FM: 87.5 - 108 MHz
Input terminals AUDIO IN (Analogue input):
500 mV/47 k ohms
■
Speaker
■
CD player
Type
1-way type speaker system
9 cm (3 - 35/64") Full range
Type
Single disc multi-play compact disc
player
Maximum input
power
10 W
Rated input power 5 W
Signal
Non-contact, 3-beam
semiconductor laser pickup
readout
Impedance
Dimensions
8 ohms
Width: 110 mm (4 - 21/64")
Height: 195 mm (7 - 11/16")
Depth: 149 mm (5 - 7/8")
D/A converter Multi bit D/A converter
Frequency
response
20 - 20,000 Hz
Weight
0.98 kg (2.16 lbs.)/each
Dynamic
range
90 dB (1 kHz)
E-15
Download from Www.Somanuals.com. All Manuals Search And Download.
|