ENGLISH
MODEL
CD-DHS1050P
MINI COMPONENT SYSTEM
OPERATION MANUAL
CD-DHS1050P Mini Component System consisting of CD-DHS1050P (main unit), CP-S1050P (front speaker) and
CP-SW1050P (subwoofer).
AND-BY
ON/ST
AY
DISPL
(
)
DS
TUNER(BAND)
AUDIO IN
X-BASS
VOL
BASS/TREBLE
TUNING
FOLDER
PLAY MODE
T
PRESE
ENTER
T
Y
MEMOR
PRESE
CLOCK/TIMER
SLEEP
CLEAR
DIMMER
DEMO
MUTE
iPhone, iPod, iPod classic, iPod nano, and
iPod touch are trademarks of Apple Inc.,
registered in the U.S. and other countries.
Accessories
Please confirm that only the following accessories are included.
iPhone® adaptor x 3
Remote control x 1
(RRMCGA255AWSA)
AM loop antenna x 1
(QANTL0005AWZZ)
FM antenna x 1
(92LFANT1535A)
(GCOVAA238AWSA - No 12)
(GCOVAA239AWSA - No 15)
(GCOVAA294AWSA - No 19)
Special Note
Supply of this product does not convey a license nor imply any right to distribute content created with this product in
revenue-generating broadcast systems (terrestrial, satellite, cable and/or other distribution channels), revenue generating
streaming applications (via Internet, intranets and/or other networks), other revenue-generating content distribution
systems (pay-audio or audio-on-demand applications and the like) or on revenue-generating physical media (compact
discs, digital versatile discs, semiconductor chips, hard drives, memory cards and the like). An independent license for
MPEG Layer-3 audio coding technology licensed from Fraunhofer IIS and Thomson.
“Made for iPod” and “Made for iPhone” mean that an electronic accessory has been designed to connect specifically
to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple
is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note
that the use of this accessory with iPod and iPhone may affect wireless performance.
Printed in Malaysia
11C R MW 1
TINSZA886AWZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT SAFETY INSTRUCTIONS (continued)
Additional Safety Information
24) Stand - Do not place the product on an unstable
15) Power Sources - This product should be operated
only from the type of power source indicated on the
marking label. If you are not sure of the type of power
supply to your home, consult your product dealer or
local power company. For product intended to operate
from battery power, or other sources, refer to the
operating instructions.
16) Overloading - Do not overload wall outlets, extension
cords, or integral convenience receptacles as this can
result in a risk of fire or electric shock.
cart, stand, tripod or table. Placing the product on an
unstable base can cause the product to fall, resulting
in serious personal injuries as well as damage to the
product. Use only a cart, stand, tripod, bracket or
table recommended by the manufacturer or sold with
the product. When mounting the product on a wall,
be sure to follow the manufacturer’s instructions. Use
only the mounting hardware recommended by the
manufacturer.
17) Object and Liquid Entry - Never push objects of any
kind into this product through openings as they may
touch dangerous voltage points or short-out parts that
could result in a fire or electric shock. Never spill liquid
of any kind on the product.
18) Damage Requiring Service - Unplug this product from
the wall outlet and refer servicing to qualified service
personnel under the following conditions:
Precautions
Q General
O
Please ensure that the equipment is positioned in a
well ventilated area and ensure that there is at least
4" (10 cm) of free space along the sides, top and back
of the equipment.
a) When the AC cord or plug is damaged,
b) If liquid has been spilled, or objects have fallen
into the product,
4
"
(10 cm)
4" (10 cm)
4" (10 cm)
5
4
3
5
2
4
1
1
MINI COMPONENT SYSTEM
CD-DHS1050P
TIMER
RS
E
N
S
O
O
T
RE
IE
POWER
ON/ STAND-BY
O
P
E
N
/
C
L
O
S
E
VOL.
VOL.
D
iPod/iPhone
5
CD
4
TUNER
(BAND)
3
T
A
P
E
TUNING
PRESET
2
A
U
D
I
O
I
N
USB
1
c) If the product has been exposed to rain or water,
d) If the product does not operate normally by
following the operating instructions. Adjust only
those controls that are covered by the operating
instructions as an improper adjustment of other
controls may result in damage and will often
require extensive work by a qualified technician
to restore the product to its normal operation,
e) If the product has been dropped or damaged in
any way, and
(
/
PNE
ADO
4" (10 cm)
Table
Floor
O
O
Do not place subwoofer system on the same
surface as the main unit to prevent sound
interruption during playback.
The unit will start the tape initialization when plugged
in to the AC outlet. During this process, initializing
sound will be heard and the unit cannot be turned on.
Wait until the process is finished.
Use the unit on
vibration.
Place the speakers at least 12" (30 cm) away from
any CRT TV to avoid color variations across the TV
screen. If the variations persist, move the speakers
further away from the TV. LCD TV is not prone to such
variation.
Keep the unit away from direct sunlight, strong magnetic
fields, excessive dust, humidity and electronic/electrical
equipment (home computers, facsimiles, etc.) which
generate electrical noise.
Do not place anything on top of the unit.
Do not expose the unit to moisture, to temperatures
higher than 140˚F (60˚C) or to extremely low
temperatures.
If your system does not work properly, disconnect the
AC power cord from the AC outlet. Plug the AC power
cord back in, and then turn on your system.
In case of an electrical storm, unplug the unit for
safety.
Hold the AC power plug by the head when removing
it from the AC outlet, as pulling the cord can damage
internal wires.
f) When the product exhibits a distinct change in
performance - this indicates a need for service.
19) Replacement Parts - When replacement parts are
required, be sure the service technician has used
replacement parts specified by the manufacturer or
have the same characteristics as the original part.
Unauthorized substitutions may result in fire, electric
shock, or other hazards.
20) Safety Check - Upon completion of any service or
repairs to this product, ask the service technician to
perform safety checks to determine that the product is
in proper operating condition.
21) Wall or ceiling mounting - When mounting the product
on a wall or ceiling, be sure to install the product
according to the method recommended by the
manufacturer.
22) Power Lines - An outside antenna system should not
be located in the vicinity of overhead power lines or
other electric light or power circuits, or where it can
fall into such power lines or circuits. When installing
an outside antenna system, extreme care should
be taken to keep from touching such power lines or
circuits as contact with them might be fatal.
O
O
a
firm, level surface free from
O
O
O
O
O
O
23) Protective Attachment Plug - The product is equipped
with an attachment plug having overload protection.
This is a safety feature. See Instruction Manual
for replacement or resetting of protective device.
If replacement of the plug is required, be sure the
service technician has used a replacement plug
specified by the manufacturer that has the same
overload protection as the original plug.
O
O
The AC power plug is used as a disconnect device and
shall always remain readily operable.
Do not remove the outer cover, as this may result
in electric shock. Refer internal service to your
local SHARP service facility.
O
This unit should only be used within the range of
41˚F - 95˚F (5˚C - 35˚C).
E-2
Download from Www.Somanuals.com. All Manuals Search And Download.
For U.S. customer only
CONSUMER LIMITED WARRANTY
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the
"Product"), when ship in its original container, will be free from defective workmanship and materials, and agrees that it will,
at its option, either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent
at no charge to the purchaser for parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below
nor to any Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or
other misuse, abnormal service or handling, or which has been altered or modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide
proof of purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law.
ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY AND FITNESS FOR USE ARE
LIMITED TO THE PERIOD(S) FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow
limitations on how long an implied warranty lasts, so the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those
described herein, or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and
exclusive remedy available to the purchaser. Correction of defects, in the manner and for the period of time described
herein, shall constitute complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the
Product, and shall constitute full satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise.
In no event shall Sharp be liable, or in any way responsible, for any damages or defects in the Product which were caused
by repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be liable or in any
way responsible for any incidental or consequential economic or property damage. Some states do not allow the exclusion
of incidental or consequential damages, so the above exclusion may not apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS WHICH VARY
FROM STATE TO STATE.
Model Specific Section
Your Product Model Number & Description:
CD-DHS1050P Mini Component System
(Be sure to have this information available when you need
service for your Product.)
One (1) year parts and labor from the date of purchase.
Warranty Period for this Product:
Non-functional accessories, supplies, and consumable
items.
Additional Item(s) Excluded from Warranty Coverage
(if any):
At a Sharp Authorized Servicer located in the United States.
To find a location of the nearest Sharp Authorized Servicer,
call Sharp toll free at 1-800-BE-SHARP.
Where to Obtain Service:
What to do to Obtain Service:
Ship prepaid or carry in your Product to a Sharp Authorized
Servicer. Be sure to have Proof of Purchase available. If
you ship the Product, be sure it is insured and packaged
securely.
TO OBTAIN SUPPLY, ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07495-1163
Precautions (continued)
System connection
Warning:
Q Speaker connection
The voltage used must be the same as that specified on
this unit. Using this product with a higher voltage other than
that which is specified is dangerous and may result in a fire
or other type of accident causing damage. SHARP will not
be held responsible for any damage resulting from use of
this unit with a voltage other than that which is specified.
O
If you use other speakers with an impedance lower
than that specified, the unit may be damaged.
Front speakers: 6 ohms, Subwoofer: 4 ohms.
Do not make a mistake when connecting the right and
left speakers. The right speaker is the one on the right
side when you face the unit.
Never mistake the FRONT SPEAKERS and the
SUBWOOFER terminals.The unit or the speakers may
be damaged.
O
O
Q Volume control
The sound level at a given volume setting depends on
speaker efficiency, location and various other factors. It is
advisable to avoid exposure to high volume levels, which
occurs while turning the unit on with the volume control
setting up high, or while continually listening at high
volumes. Excessive sound pressure from earphones and
headphones can cause hearing loss.
O
O
O
O
Insert the speaker plug fully with the lever side facing
to the top.
Hold the speaker plug when removing it from the unit.
Pulling the wire may cause malfunction to the unit.
Do not stand or sit on the speakers. You may be
injured.
Do not allow any objects to fall into or to be placed in
the bass reflex duct.
E-3
Download from Www.Somanuals.com. All Manuals Search And Download.
System connections (continued)
Make sure to unplug the AC power cord before making any connections.
TV
To video input
jack
Video cable
(not supplied)
FM antenna
Wire
Plug in with the lever side
facing to the top.
External FM
antenna for
better reception
(not supplied)
AM loop antenna
AC outlet (AC 120 V ~ 60 Hz)
Remote control
Caution:
O
Q Battery installation
Remove the battery if the unit will not be used for a
long period of time. This will prevent potential damage
due to battery leakage.
Do not use rechargeable batteries (nickel-cadmium
battery, etc.).
Installing the battery incorrectly may cause the unit to
malfunction.
Batteries (battery pack or batteries installed) shall not
be exposed to excessive heat such as sunshine, fire
or the like.
Use 1 “AA” size battery (UM/SUM-3, R6, HP-7 or
similar). Battery is not included.
O
O
O
1
2
Open the battery cover.
Insert the battery according to the direction indicated
in the battery compartment.
When inserting or removing the battery, push it toward
the battery terminal.
3
Close the battery cover.
Notes concerning use:
O
O
O
Replace the battery if the operating distance is reduced
or if the operation becomes erratic.
Periodically clean the transmitter on the remote control
and the sensor on the unit with a soft cloth.
Exposing the sensor on the unit to strong light may
interfere with operation. Change the lighting or the
direction of the unit.
O
Keep the remote control away from moisture, heat,
shock, and vibrations.
E-4
Download from Www.Somanuals.com. All Manuals Search And Download.
General control
POWER
ON/ STAND-BY
Q Bass control (X-BASS)
5
4
3
2
1
When the power is first turned on, the unit will enter the
extra bass mode which emphasizes the bass frequencies,
and “X-BASS” will appear. To cancel the extra bass mode,
press the X-BASS button.
iPod/iPhone
MINI COMPONENT SYSTEM
CD-DHS1050P
REMOTE
SENSOR
TIMER
POWER
ON/ STAND-BY
VOL.
VOL.
OPEN
/
CLOSE
VOL.
VOL.
iPod/iPhone
CD
5
4
3
2
1
CD
TUNER
(BAND)
T
APE
TUNING
PRESET
AUDIO IN
USB
Q Bass control
TUNER
(BAND)
1
2
Press the BASS/TREBLE button to select “BASS”.
TAPE
AUDIO IN
USB
Within 5 seconds, press the VOLUME (+ or -) button
to adjust the bass.
Q Treble control
1
Press the BASS/TREBLE button to select “TREBLE”.
Within 5 seconds, press the VOLUME (+ or -) button to
adjust the treble.
ON/STAND-BY
X-BASS
ON/STAND-BY
2
DISPLAY MENU
(
DISPLAY
TUNER(BAND)
AUDIO IN
BASS/TREBLE
Q Auto power on function
X-BASS
BASS/TREBLE
TUNING
FOLDER
VOL
PLAY MODE
When you press any of the following buttons, the unit turns
on.
PRESET
ENTER
VOL
PRESET
DIMMER
CLOCK/TIMER
MEMORY
SLEEP
O
O
O
O
O
O
iPod®/iPhone, CD, USB, AUDIO IN, TUNER (BAND),
TAPE button (main unit/remote control): Selected
function is activated.
button (main unit): The unit turns on and playback
of the last function will start (iPod/iPhone, CD, USB,
AUDIO IN, TUNER (BAND), TAPE).
DEMO
DIMMER
CLEAR
MUTE
DEMO
MUTE
iPod/iPhone
button (remote control):The unit turns
on and the iPod/ iPhone playback starts (regardless of
the last function).
Q To turn the power on
CD
button (remote control): The unit turns on
The first time the unit is plugged in, the unit will enter the
demonstration mode.
and the CD playback starts (regardless of the last
function).
TAPE
button (remote control): The unit turns on
Remote
control
ON/STAND-BY
Function
Main unit
Operation
and the TAPE playback starts (regardless of the last
function).
POWER
Power on/
off
Press to turn the
power on or to
go to stand-by
mode.
Press to enter to
demonstration on
or off mode.
ON/ STAND-BY
USB
button (remote control): The unit turns on
and the USB playback starts (regardless of the last
function).
____
Demo on/
off
DEMO
Q Auto power off function
The main unit will enter the stand-by mode (when iPod/
iPhone is not docked) after 15 minutes of inactivity during:
iPod/iPhone: No connection.
Q Display brightness control
AUDIO IN: No detection of input signal or very low sound
audibility.
To dim the display brightness, press the DIMMER button
on the remote control.
TUNER: No reception of broadcast signal.
CD / USB / TAPE: In the stop mode.
Q Volume auto fade-in
Note:
If you turn off and on the main unit with the volume set to
27 or higher, the volume starts at 16 and fades in to the
last set level.
However, if iPod/iPhone is docked, the unit will begin
charging.
“CHARGING” will be displayed.
Q Volume control
Turn the volume knob toward VOL +/– (on main unit) or
press VOL +/– (on remote control) to increase or decrease
the volume.
E-5
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the iPod or iPhone
iPhone and iPod operations
Made for:
Q To remove iPod or iPhone adaptor
Insert the tip of a screwdriver (“-” type, small)
into the adaptor hole as shown and lift upward
to remove.
O
O
O
O
O
O
O
iPhone 4
O
O
O
O
O
O
O
iPod touch (1st generation)
iPod classic
iPhone 3GS
iPhone 3G
iPhone
iPod nano (6th generation)
iPod nano (5th generation)
iPod nano (4th generation)
iPod nano (3rd generation)
iPod nano (2nd generation)
iPod touch (4th generation)
iPod touch (3rd generation)
iPod touch (2nd generation)
Q iPod or iPhone playback
1
2
Press the ON/STAND-BY button to turn the power on.
Press the iPod/iPhone button to select iPod or iPhone
function.
Caution:
Please update your iPod unit to the latest software version
from Apple’s homepage before using it.
3
4
Insert iPod or iPhone unit in iPod or iPhone dock of
main unit. “DOCK OK” will be displayed.
Notes:
Press the
playback.
(iPod or iPhone
) button to start
O
Once the iPod or iPhone is connected to the unit it will
begin charging.
The iPod or iPhone unit cannot be charged while
the main unit is in the stand-by mode or during USB
mode.
O
Note:
iPod and iPhone cannot be played back via USB cable and
connection, “NO SUPPORT” will be displayed.
O
O
The message “This accessory is not made to work with
iPhone” or similar, may appear on the iPhone screen
when:
Q iPhone playback
- battery is low.
O
Sound will only switch from iPhone to the main unit after
authentication process is completed in approximately
10 seconds.
- the iPhone is not properly docked (eg. slanting).
If this occurs, remove and re-dock the iPhone.
This product is made for iPhone. To prevent random
interference when iPhone is docked, the headphone
output is disabled, and “HP INVALID” will be displayed.
You may also experience brief audio interference
during incoming calls.
O
O
Incoming calls will pause the playback.
Once the calls are answered, the conversation can
only be heard through the built-in iPhone speaker.Turn
on the iPhone speaker or undock the iPhone to start
conversation.
Q iPod and iPhone adaptor connection
Notes:
Q To disconnect iPod or iPhone
O
Please use the adaptor supplied with your iPod or
iPhone unit.
Simply remove the iPod or iPhone from the iPod or iPhone
dock. It is safe to do so even during playback.
O
You can use an audio cable to connect your iPod to the
AUDIO IN jack if:
1. your iPod adaptor does not fit into the iPod dock on
Q Navigating the iPod or iPhone menus
the main unit.
2. you have an iPod that does not have an iPod
adaptor.
1
Press the MENU button to view the menu on iPod
or iPhone unit. Press it again to go back to previous
menu.
3. you have an iPod that does not have an iPod 30 pin
connector.
2
Use the PRESET ( or ) button to select an item on
the menu and then press ENTER button.
iPhone
Adaptor No.
iPhone
Capacity
Description
Note:
12
15
15
19
iPhone
4GB & 8GB & 16GB
8GB & 16GB
When navigating the iPod or iPhone menu with remote
control, do not operate any of the buttons on the iPod or
iPhone unit. The volume level is adjusted by turning the
volume knob on main unit or pressing the VOL (+ or –)
button on the remote control. Adjusting the volume on the
iPod unit gives no effect.
iPhone 3G
iPhone 3GS
iPhone 4
16GB & 32GB
16GB & 32GB
iPod or iPhone operation
The operations described below depend on the generation
iPod or iPhone you are using.
Q To insert iPod or iPhone adaptor
Insert the iPod or iPhone adaptor into the unit and connect
your iPod or iPhone.
System on operation
When the main unit is powered on, the iPod or iPhone
unit will automatically power on when docked in the unit
(including TIMER function).
iPhone
adaptor
iPhone
connector
System off (stand-by operation)
iPhone dock
iPhone
bottom
When the main unit is turned to stand-by mode, the
docked iPod or iPhone unit will automatically turn to stand-
by mode.
iPhone
(
)
Dock connector
E-6
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the iPod or iPhone (continued)
Listening to a CD or MP3/WMA disc
POWER
ON/ STAND-BY
Q Various iPod or iPhone functions
OPEN / CLOSE
ON/STAND-BY
CD
DISPLAY
MENU
T
)
DISPLA
TUNER(BAND)
AUDIO IN
Y
DISPLAY
Main
unit
Remote
control
X-BAS
Function
Play
Operation
TUNING BASS/TREBLE
FOLDER
VOL
5
PLAY MODE
PRESET
ENTER
5
4
3
2
1
PRESET
PLAY MODE
Press in the pause mode.
Press in the playback mode.
CLOCK/TIMER
MEMORY
SLEEP
DEMO
DIMMER
CLEAR
MUTE
4
3
2
1
Pause
MINI COMPONENT SYSTEM
CD-DHS1050P
R
E
M
O
TE
TIMER
S
E
N
S
OR
POWER
ON/ STAND-BY
Track up/
down
OPEN
/
CLOSE
VOL.
Press in the playback or
pause mode. If you press the
button in the pause mode,
VOL.
iPod/iPhone
CD
5
4
3
2
1
TUNER
(BAND)
T
APE
TUNING
PRESET
AUDIO IN
USB
press the
button to start
the desired track.
Fast
forward/
reverse
Press and hold down in the
playback mode. Release the
button to resume playback.
Q Disc playback
1
2
3
Press the ON/STAND-BY button to turn the power on.
Press the CD button.
Press the 1 button and within 5 seconds, press the OPEN/
CLOSE button to open the disc tray 1.
Back light/
TV OUT
iPod back light ON. Press
and hold this button for more
than 2 seconds until “TV
OUT ON” or “TV OUT OFF”
appear to toggle the video
out display between iPod
or TV.
DISPLAY
____
____
(TV OUT)
4
5
6
Place the disc on the disc tray 1, label side up.
Press OPEN/CLOSE button to close the disc tray 1.
You can place discs on the trays 2 - 5 by following steps
3 - 5.
Repeat
Shuffle
Press to toggle repeat mode.
PLAY MODE
MENU
7
Press the
button to start playback.
Notes for CD or MP3/WMA discs:
O
O
Press and hold down to
toggle shuffle mode.
Track up/track down is possible only within individual discs.
Playback of the track will begin when its beginning is
reached during fast reverse. When the beginning of the first
track is reached during fast reverse, the unit will enter the
playback mode.
Rewritable multi-session discs with unfinished writing, can
still be played.
Menu
Enter
Press to view the iPod menu
during iPod function.
____
____
Press to confirm the
selection.
ENTER
O
Cursor
Up/Down
Press to select the iPod
menu.
Q Various disc functions
PRESET
PRESET
____
Main
unit
Remote
control
Function
Pause
Operation
Press in the playback
mode. Press the
button to resume playback
from the paused point.
Q Watching videos on a TV connected to
iPod or iPhone
Track up/
Track
down
Press in the playback or
stop mode. If you press the
button in the stop mode,
1
2
Press and hold the DISPLAY button for more than 2 seconds
until “TV OUT ON” appear on display.
Press the ENTER button to start playback.
press the
button to
Notes:
start the desired track.
O
If the TV Out setting is already turned On at video menu,
the video is automatically displayed on the TV screen when
ENTER key is pressed.
To return to watching video on iPod or iPhone screen, press
the MENU button to enter video menu. Then press and hold
the DISPLAY button for more than 2 seconds until “TV OUT
OFF” appears.
Fast
forward/
Fast
Press and hold down in the
playback mode. Release
the button to resume
playback.
O
reverse
Q To specify a disc to play
O
During iPod or iPhone video playback, pressing the DISPLAY
button will not toggle video out display between iPod or iPhone
and TV.
You can play a disc by specifying the disc number.
Caution:
1
Press one of the 1 -
buttons to select the desired
disc.
5
O
Unplug all accessories for the iPod or iPhone before inserting
it into the iPod or iPhone dock.
Stop button ( ) at main unit is invalid during iPod or iPhone
function.
O
Selected disc number
(CD ) button.
Playback will begin from track 1 on the chosen disc.
After the last track on the last disc is played, the unit stops
automatically.
2
O
O
Within 5 seconds, press the
E-7
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to a CD or MP3/WMA disc (continued)
Note:
Q Programmed play
If a disc tray with no disc is selected, playback will not start
and the disc indicator will disappear.
To stop playback: Press the (CD ) button.
You can choose up to 32 selections for playback in the
order you like.
1
While in the stop mode, press the MEMORY button to
enter the programming save mode.
Q Direct track search
By using the numeric buttons, the desired tracks on the
current disc can be played.
Use the numeric buttons on the remote control to select
the desired track while playing the selected disc.
2
3
4
Press one of the
desired disc.
1 -
5 buttons to select the
O
O
The numeric buttons allow you to select up to number 9.
When selecting number 10 or higher, use the “+10” button.
Press the numeric buttons on the remote control or
or button to select the desired track.
A. For example, to choose 13
Press the MEMORY button
to save the track number.
1
2
Press the “+10” button.
Press the “1” and then “3”
button.
5
Repeat steps 2 - 4 for other tracks. Up to 32 tracks can
be programmed. If you want to check the programmed
tracks, press the MEMORY button repeatedly.
If you make a mistake, the programmed tracks can be
cleared by pressing the CLEAR button.
Selected track number
B. For example, to choose 130
1
2
Press the “+10” button twice.
Press the “1”, “3” and “0” button.
6
Press the
(CD
) button to start playback.
Notes:
O
A track number higher than the number of tracks on the
disc cannot be selected.
During random play, direct search is not possible.
Q Programmed play (MP3/WMA)
O
1
While in the stop mode,
press the MEMORY
button to enter the
programing save mode.
Q Repeat play
Repeat play can play all 5 discs, all tracks on a chosen
disc, single track on a chosen disc, or a programmed
sequence continuously.
To repeat one track:
Press the PLAY MODE button once. Press the
To repeat one disc:
Press the PLAY MODE button twice. Press the
) button.
To repeat all tracks on up to 5 discs:
Press the PLAY MODE button 3 times. Press the
) button.
2
3
Press one of the
desired disc.
1 -
5 buttons to select the
Press the PRESET
(
or ) button on the
button.
(CD
remote control to select
the desired folder.
Then press the
or
button on the remote
control to select the
desired tracks.
Press the MEMORY button to save the folder and
track number.
(CD
4
5
6
To repeat desired tracks:
Perform steps 1 - 6 in “Programmed play” section on page
8 and then press the PLAY MODE button.
To cancel repeat play:
Repeat steps 3 - 4 for other folder/tracks. Up to 32
tracks can be programmed.
Press the
(CD/USB
) button to start playback.
Press the PLAY MODE button again until “
” disappear.
To cancel the programmed play mode:
During programmed stop mode, press the
button. The display will show “MEM CLEAR” and all the
programmed contents will be cleared.
(CD
)
Q Random play
The tracks on the disc(s) can be played in random order
automatically.
To random play all tracks on up to 5 discs:
Press the PLAY MODE button for 2 seconds on the remote
control and then press the
Adding tracks to the program:
If a program has been previously stored, the “MEMORY”
indicator will be displayed.
(CD
) button.
Press the MEMORY button repeatedly to go to the last
program memory. Then follow steps 2 - 4 to add tracks.
The new tracks will be stored after the last track of the
previous program.
To cancel random play:
Press the PLAY MODE button.
“R” will disappear.
Notes:
Notes:
O
When a disc is ejected, the program is automatically
canceled.
O
If you press the
button during random play, you can
move to the next track by the random operation. On the
other hand, the
O
If you press the ON/STAND-BY button to enter the
stand-by mode or change the function from CD to
another, the programmed selections will be cleared.
During the program operation, random play is not
possible.
button does not allow you to move
to the previous track. The beginning of the track being
played will be located.
In random play, the unit will select and play tracks
automatically. (You cannot select the order of the tracks.)
O
O
Caution:
After performing repeat or random play, be sure to press
the
(CD ) button. Otherwise, the disc(s) will play
continuously.
E-8
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to USB mass storage device/MP3 player
USB
O
This USB memory cannot be operated via USB hub.
DISPLAY
ON/STAND-BY
I
U
O
The USB terminal in this unit is not intended for a PC
connection but is used for music streaming with a USB
memory device.
External HDD-storage cannot be played back via USB
terminal.
DISPLAY
TUNER(BAND)
AUDIO IN
CD
TUNER
(BAND)
AUDIO IN
USB
X-BASS
TAPE
TUNING
AUDIO IN
USB
TUNING BASS/TREBLE
FOLDER
VOL
FOLDER
PLAY MODE
PRESET
ENTER
PRESET
ENTER
O
O
O
PRESET
CLOCK/TIMER
MEMORY
SLEEP
DEMO
DIMMER
CLEAR
MUTE
If the data inside the USB memory is large, it may take longer
time for the data to be read.
PRESET
USB
This product can play WMA and MP3 files. It will automatically
detect the file type being played. If unplayable file is played on
this product, “NO SUPPORT” is indicated and the file will be
automatically skipped.This will take a few seconds.If abnormal
indications appear on the display due to the unspecified file,
turn off the unit and then turn it on again.
This product relates to USB mass storage devices and MP3
players. It may however face some irregularities due to various
unforeseen reasons from some devices. Should this happen,
turn off the unit and then turn it on again.
Note:
This product is not compatible with MTP and AAC file systems
from USB mass storage device or MP3 player.
Q To play back USB/MP3 player with folder
O
mode off
1
Press the USB button on main unit to select USB function.
Connect the USB memory device that has MP3/WMA format
files on the unit. When the USB memory is connected to the
main unit, the device information will be displayed.
Select desired file to be played back by pressing the
button.
O
O
The USB port is only intended for direct connection to a USB
memory device without any cable.
During CD function, MP3 player will not be charging.
2
3
or
Press the
(USB
) button. Playback will start and the
file name will be displayed.
Advanced USB playback
The following functions are the same as CD operations:
O
O
Title, Artist and Album name are displayed if they are
recorded in the USB memory device.
Display content can be changed by pressing the DISPLAY
button.
Page
Direct track search ..................................................................8
Repeat play ..............................................................................8
Random play ............................................................................8
Programmed play .....................................................................8
Note:
To pause playback:
Press the (USB
) button.
Note:
If USB memory device is not connected, “NO MEDIA” will be
shown on the display.
Q To play back USB/MP3 player with folder
mode on
Notes:
1
Press the USB button on main unit to select USB function.
Connect the USB memory device that has MP3/WMA format
files on the unit. When the USB memory is connected to the
main unit, the device information will be displayed.
O
O
O
O
This unit only supports “MPEG-1 Audio Layer-3” format.
(Sampling Frequency is 32, 44.1, 48kHz)
Playback order for MP3 files may differ depending on the
writing software used during file download.
Bitrate which is supported by MP3 is 32~320 kbps, WMA is
64~160 kbps.
For MP3/WMA files, please put “.MP3” “.WMA” extension.
Files cannot be played back if there is no MP3/WMA
extension.
2
Press the FOLDER button, and press the PRESET ( or
)
button to select desired playback folder. To start playback with
folder mode on, go to step 4.
3
4
Select desired file to be played back by pressing the
button.
or
Press the
(USB
) button. Playback will start and the
file name will be displayed.
O
O
Title, Artist and Album name are displayed if they are
recorded in the USB memory device.
Display content can be changed by pressing the DISPLAY
button.
O
O
Playlists are not supported on this unit.
This unit can display Folder Name or File Name up to 32
characters.
O
O
Maximum total number of MP3/WMA files is 65025.
Q To remove USB memory device
Total number of folders read is 999 including folder with non
playable file.However, the display shows only folder with MP3
files.
The display playback time may not be displayed correctly
when playing back a variable bitrate file.
The ID3TAG information supported are TITLE, ARTIST and
ALBUM only. Title name, artist name and album name can
be displayed by pressing the DISPLAY button during file
playback or pause mode.
WMA meta tag also supports title, artist and album name
which are recorded in WMA files. Copyright protected WMA
files cannot be played back.
1
Press the (USB ) button to stop playback.
Disconnect USB memory device from the USB terminal.
2
O
O
Notes:
O
SHARP will not be held liable for the loss of data while the
USB memory device is connected to the audio system.
Files compressed in MP3 and/or WMA format can be played
back when connected to the USB terminal.
This USB memory’s format supports FAT 16 or FAT 32.
SHARP cannot guarantee that all USB memory devices will
work on this audio system.
USB cable is not recommended for use in this audio system
to connect to USB memory device. Use of the USB cable will
affect the performance of this audio system.
O
O
O
O
O
E-9
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to the radio
Q Memorizing a station
OPEN / CLOSE
You can store 40 AM and FM stations in memory and
recall them at the push of a button. (Preset tuning)
TUNER
(BAND)
1
Perform steps 1 - 3 in “Tuning”.
5
4
3
2
1
2
Press the MEMORY
button to enter the
preset tuning saving
mode.
TAPE
MINI COMPONENT SYSTEM
CD-DHS1050P
R
E
M
O
TE
TIMER
S
E
N
S
OR
POWER
ON/ STAND-BY
OPEN
/
CLOSE
VOL.
VOL.
iPod/iPhone
CD
5
4
3
2
1
TUNER
(BAND)
T
APE
TUNING
PRESET
AUDIO IN
USB
3
4
Within 30 seconds, press the PRESET ( or ) button
to select the preset channel number. Store the stations
in memory, in order, starting with preset channel 1.
TUNING
PRESET
Within 30 seconds, press the MEMORY button to
store that station in memory. If the “MEMORY” and
preset number indicators disappear before the station
is memorized, repeat the operation from step 2.
TUNER(BAND)
ON/STAND-BY
TAPE
()
5
Repeat steps 1 - 4 to set other stations, or to change
a preset station. When a new station is stored in the
memory, the station previously memorized for that
preset channel number will be erased.
DISPLAY
TUNER(BAND)
AUDIO IN
X-BASS
BASS/TREBLE
TUNING
VOL
FOLDER
PLAY MODE
TUNING
PRESET
ENTER
Note:
PRESET
CLOCK/TIMER
MEMORY
SLEEP
The backup function protects the memorized stations for a
few hours should there be a power failure or the AC power
cord become disconnected.
DEMO
DIMMER
CLEAR
MUTE
MEMORY
PRESET
Q To recall a memorized station
Press the PRESET ( or ) button for less than 0.5
seconds to select the desired station.
PRESET
Q Tuning
Q To scan the preset stations
1
2
Press the ON/STAND-BY button to turn the power on.
The stations saved in the memory can be scanned
automatically. (Preset memory scan)
Press the TUNER (BAND) button repeatedly to select
the desired frequency band (FM or AM).
1
Press the PRESET ( or ) button for more than
0.5 seconds. The preset number will flash and the
programmed stations will be tuned in sequentially, for
5 seconds each.
3
Press the TUNING ( or ) button to tune in to the
desired station.
Manual tuning:
2
Press the PRESET ( or ) button again when the
desired station is located.
Press the TUNING ( or ) button as many times as
required to tune in to the desired station.
Auto tuning:
When the TUNING ( or ) button is pressed for more
than 0.5 seconds, scanning will start automatically
and the tuner will stop at the first receivable broadcast
station.
Q To erase entire preset memory
1
2
Press the ON/STAND-BY button to enter the stand-by
mode.
Notes:
O
While pressing down the OPEN / CLOSE button and
TUNING button, press the TUNER (BAND) button
When radio interference occurs, auto scan tuning may
stop automatically at that point.
Auto scan tuning will skip weak signal stations.
until “TUNER CLEAR” appears.
TUNING
TUNER
(BAND)
OPEN / CLOSE
O
O
To stop the auto tuning, press the TUNING ( or
button again.
)
TAPE
To receive an FM stereo transmission:
O
Press the TUNER (BAND) button to display the “ST”
indicator.
O
O
“
” will appear when an FM broadcast is in stereo.
If the FM reception is weak, press the TUNER (BAND)
button to extinguish the “ST” indicator. The reception
changes to monaural, and the sound becomes
clearer.
E-10
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening to a cassette tape
Setting the clock (Remote control
only)
In this example, the clock is set for the 12-hour (AM 12:00)
display.
Before playback:
O
For playback, use normal or low-noise
tapes for the best sound. (Metal or
CrO2 tapes are not recommended.)
1
2
3
4
Press the ON/STAND-BY button to turn the power on.
Press the CLOCK/TIMER button.
Within 10 seconds, press the MEMORY button.
O
O
Do not use C-120 tapes or poor-quality
tapes, as they may cause malfunctions.
Before loading a tape into the cassette compartment,
tighten the slack with a pen or a pencil.
Press the
or
button to select 12-hour or
24-hour display and then press the MEMORY button.
“AM 12:00”
The 12-hour display will appear.
(AM 12:00 - PM 11:59)
The 12-hour display will appear.
(AM 0:00 - PM 11:59)
The 24-hour display will appear.
(0:00 - 23:59)
Q Tape playback
Press the ON/STAND-BY button to turn the power on.
1
2
”
“AM 0:00
“0:00”
Open the cassette compartment
by pushing the area marked “ ”.
ON/
OPEN
/
CLOSE
VOL.
VOL.
3
Load
a
cassette into the
5
4
3
2
1
iPod/iPhone
CD
TUNER
(BAND)
TAPE compartment with
the side to be played facing
toward you.
PRESET
TAPE
TUNING
AUDIO IN
USB
5
6
Press the
or
button to adjust the hour and
then press the MEMORY button.
Press the or button to adjust the minutes
and then press the MEMORY button.
Press the or button once to advance the
time by 1 minute. Hold it down to change the time in
5-minutes intervals.
4
5
Press the TAPE / TUNER
button repeatedly to select
TAPE.
Press the
(TAPE ) button to start playback.
Q Various tape functions
To confirm the time display:
Press the CLOCK/TIMER button. The time display will
appear for about 10 seconds.
Main
unit
Remote
control
Function
Operation
Note:
TAPE
Stop
Press in the
The “CLOCK” will appear or time will flash to confirm the
time display when the AC power supply is restored after a
power failure or unplugging the unit. If incorrect, readjust
the clock as follows.
playback, fast
forward or fast
rewind mode.
Fast
Press in the
playback or stop
mode.
To readjust the clock:
forward/
rewind
Perform “Setting the clock” from step 1. If “CLOCK” does
not appear in step 3, step 4 (for selecting the 12-hour or
24-hour display) will be skipped.
To change the 12-hour or 24-hour display:
1
Clear all the programmed contents. [Refer to “Factory
reset, clearing all memory” on page 14 for details.]
Caution:
O
Before remove the cassette or changing from one tape
operation to another, press the (TAPE ) button.
If a power failure occurs during tape operation, the
tape head will remain engaged with the tape and the
cassette door will not open. In this case, wait until the
power is restored.
2
Perform “Setting the clock” from step 1 onwards.
O
Timer and sleep operation (Remote
control only)
Once timer:
Once timer play works for one time only at a preset time.
Q Cleaning the tape-handling parts
Daily timer:
O
Dirty heads, capstans or pinch rollers can cause poor
sound and tape jams. Clean these parts with a cotton
swab moistened with commercial head/pinch roller
cleaner or isopropyl alcohol.
When cleaning the heads, pinch rollers, etc., unplug
the unit which contains high voltages.
Daily timer play works at the same preset time every day.
For example, set the timer as a wake-up call every
morning.
Using the once timer and daily timer in combination:
For example, use the once timer to listen to a radio
program, and use the daily timer to wake up.
O
O
B
C
A
A Playback head
B Capstan
TAPE 1
C Pinch roller
After long use, the deck’s heads and capstans may
becomemagnetized,causingpoorsound.Demagnetize
these parts once every 30 hours of playing/recording
time by using a commercial tape head demagnetizer.
Read the demagnetizer’s instructions carefully before
use.
E-11
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer and sleep operation (Remote control only) (continued)
Notes:
1 minute or more
O
When performing timer playback using another unit
connected to the USB terminal or AUDIO IN jack,
select “USB” or “AUDIO IN” in step 8.
This unit will turn on or enter the power stand-by mode
automatically. However, the connected unit will not
turn on or off. To stop the timer playback, follow step
“Canceling the timer setting” of this page.
Daily timer
Start Stop
Once timer
Start Stop
O
Q Timer playback
Before setting timer:
Checking the timer setting:
1 Check that the clock is set to the correct time. If it is
not set, you cannot use the timer function.
2 For timer playback: Plug in USB, dock iPod/iPhone,
load discs or tape to be played.
1
2
3
Turn the power on and press and hold down the
CLOCK/TIMER button.
Within 10 seconds, press the
or
button to select
“ONCE” or “DAILY”, and press the MEMORY button.
Within 10 seconds, press the
or
button to
select “ONCE CALL” or “DAILY CALL”, and press the
MEMORY button.
1
2
3
Press the ON/STAND-BY button to turn the power on.
Press and hold the CLOCK/TIMER button.
Canceling the timer setting:
Within 10 seconds, press the
or
button
1
2
3
Turn the power on and press and hold down the
to select “ONCE” or “DAILY”, and press the MEMORY
button. Set the clock to the correct time if “ONCE” or
“DAILY” does not appear.
CLOCK/TIMER button.
Within 10 seconds, press the
“ONCE” or “DAILY”, and press the MEMORY button.
Within 10 seconds, press the or button to select
“ONCE OFF” or “DAILY OFF”, and press the MEMORY
button. Timer will be canceled (the setting will not be
canceled).
or
button to select
4
Within 10 seconds, press the
or
button to select
“ONCE SET” or “DAILY SET”, and press the MEMORY
button.
5
6
To adjust the hour, press the
press the MEMORY button.
To adjust the minutes, press the
then press the MEMORY button.
or
button and then
or button and
Reusing the memorized timer setting:
The timer setting will be memorized once it is entered. To
reuse the same setting, perform the following operations.
7
8
Set the time to finish as in steps 5 and 6 above.
1
2
3
Turn the power on and press and hold down the
CLOCK/TIMER button.
To select the timer playback source (CD, TUNER, USB,
iPhone/iPod, TAPE or AUDIO IN), press the
button. Press the MEMORY button.
or
Within 10 seconds, press the
or
button to select
“ONCE” or “DAILY”, and press the MEMORY button.
When you select the tuner, select a station by pressing
the or button, and then press the MEMORY
button. If a station has not been programmed, “NO
PRESET” will be displayed and timer setting will be
canceled.
Within 10 seconds, press the
or
button to select
“ONCE ON” or “DAILY ON”, and press the MEMORY
button.
4
Press the ON/STAND-BY button to enter the power
stand-by mode.
10 Adjust the volume using theVOLUME control, and then
press the MEMORY button. Do not turn the volume up
too high.
11 Press the ON/STAND-BY button to enter the power
stand-by mode. The “TIMER” indicator lights up and
the unit is ready for timer playback.
Q Sleep operation
The iPod, Audio In, radio, CD, MP3/WMA disc, USB and
cassette tape can all be turned off automatically.
1
2
3
Play back the desired sound source.
Press the SLEEP button.
Within 10 seconds, press the SLEEP button repeatedly
to select the time and then press the MEMORY
button.
5
4
3
2
1
MINI COMPONENT SYSTEM
CD-DHS1050P
REMOTE
SENSOR
TIMER
10
20
30 ....... 80
90
POWER
ON/ STAND-BY
OPEN
/
CLOSE
4
5
“SLEEP” will appear.
VOL.
VOL.
iPod/iPhone
CD
5
4
3
2
1
The unit will enter the power stand-by mode
automatically after the preset time has elapsed. The
volume will be turned down 1 minute before the sleep
operation finishes.
TUNER
(BAND)
T
APE
TUNING
PRESET
AUDIO IN
USB
12 When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the
preset volume. The “” or “DAILY” indicator will blink
during timer playback.
13 When the timer end time is reached, the system will
enter the power stand-by mode automatically.
To confirm the remaining sleep time:
While “SLEEP” is indicated, press the SLEEP button.
1
To cancel the sleep operation:
Press the ON/STAND-BY button while “SLEEP” is
indicated.To cancel the sleep operation without setting the
unit to the stand-by mode, proceed as follows.
Once timer:
The timer will be canceled.
1
2
While “SLEEP” is indicated, press the SLEEP button.
Daily timer:
Within 10 seconds, press the SLEEP button repeatedly
to select “SLEEP OFF” and then press the MEMORY
button.
The timer operates at the same time every day. It
will continue until the daily timer setting is canceled.
Cancel the daily timer when it is not in use.
E-12
Download from Www.Somanuals.com. All Manuals Search And Download.
Timer and sleep operation (Remote
control only) (continued)
Troubleshooting chart
Many potential problems can be resolved by the owner
without calling a service technician. If something is wrong
with this product, check the following before calling your
authorized SHARP dealer or service center.
Q To use timer and sleep operation together
Sleep and timer playback:
For example, you can fall asleep listening to the radio and
wake up to CD in the next morning.
Q General
Symptom
Possible cause
1
2
Set the sleep time (see above, steps 1 - 5).
While the sleep timer is set, set the timer playback
(steps 2 - 10, page 12).
O The clock is not set O Did a power failure occur?
to the correct time.
Reset the clock. (Refer page
11)
Sleep timer
setting
Timer playback
setting
O When a button is
pressed, the unit
does not respond.
O Set the unit to the power
stand-by mode and then turn
it back on.
O If the unit still malfunctions,
reset it. (Refer page 14)
End time
Desired time
1 - 90 minutes
Sleep operation will
Timer playback
start time
O No sound is heard. O Is the volume level set to “0”?
O Are the headphones
automatically stop
connected?
O Are the speaker wires
disconnected?
Enhancing your system
The connection cord is not included. Purchase
commercially available cord as shown below.
a
Q CD player
Portable audio
player, etc.
Symptom
Possible cause
O
O
Playback does not
start.
Playback stops in
the middle or is not
performed properly.
O
O
O
Is the disc loaded upside
down?
Does the disc satisfy the
standards?
Is the disc distorted or
scratched?
5
4
3
2
1
PHONES
To the
line
output
jack
MINI COMPONENT SYSTEM
CD-DHS1050P
REMOTE
TIMER
SENSOR
POWER
ON/ STAND-BY
OPEN
/
CLOSE
VOL.
VOL.
iPod/iPhone
CD
5
4
3
2
1
TUNER
(BAND)
TAPE
TUNING
PRESET
AUDIO IN
USB
AUDIO IN
O
O
Playback sounds
are skipped, or
stopped in the
O
Is the unit located near
excessive vibrations?
Is the disc very dirty?
Has condensation formed
inside the unit?
PHONES
AUDIO IN
O
O
middle of a track.
USB
“ER-CD21”
appears on the
display.
O
Is the disc tray stopped with
force? Set the unit to the
power stand-by mode and
then turn it back on.
Audio cable (not supplied)
Q Listening to the playback sounds of
portable audio player, etc.
Q Cassette deck
1
Connect a portable audio player etc. to the front AUDIO
IN jack.
Press the ON/STAND-BY button to turn the power on.
Press the AUDIO IN/USB button repeatedly to select
AUDIO IN.
Symptom
Possible cause
2
3
O
O
O
Sound skipping.
Cannot hear treble.
Sound fluctuation.
O
O
O
Is there any slack?
Is the tape stretched?
Are the capstans, pinch
rollers, or heads dirty?
4
Play the connected equipment.
If volume level of the connected device is too high,
sound distortion may occur. Should this happen, lower
the volume of the connected device.
If volume level is too low, increase the volume of the
connected device.
O
Cannot remove the
tape.
O
If a power failure occurs
during playback, the heads
remain engaged with the
tape. Do not open the
compartment with great
force.
Note:
To prevent noise interference, place the unit away from the
television.
Q Headphones
O
Before plugging in or unplugging the headphones,
reduce the volume.
O
Be sure your headphones have a 1/8" (3.5 mm) diameter
plug and impedance between 16 and 50 ohms. The
recommended impedance is 32 ohms.
O
Plugging in the headphones disconnects the speakers
automatically. Adjust the volume using the VOLUME
control.
E-13
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting chart (continued)
Q Remote control
Q If problem occurs
When this product is subjected to strong external
interference (mechanical shock, excessive static electricity,
abnormal supply voltage due to lightning, etc.) or if it is
operated incorrectly, it may malfunction.
Symptom
Possible cause
O The remote control O Is the AC power cord of the
does not operate.
unit plugged in?
O Is the battery polarity correct?
O Is the battery dead?
O Is the distance or angle
incorrect?
If such a problem occurs, do the following:
1
Set the unit to the stand-by mode and turn the power
on again.
O Does the remote control
sensor receive strong light?
2
If the unit is not restored in the previous operation,
unplug and plug in the unit again, and then turn the
power on.
Q Tuner
Note:
If neither operation above restores the unit, clear all the
memory by resetting it.
Symptom
Possible cause
O The radio makes
unusual noises
continuously.
O Is the unit placed near the TV
or computer?
Q Factory reset, clearing all memory
O Is the FM antenna or AM loop
antenna placed properly?
Move the antenna away from
the AC power cord if it is
located nearby.
1
2
Press the ON/STAND-BY button to enter the power
stand-by mode.
While pressing down the OPEN/CLOSE button and
the button, press the CD button until “CLEAR ALL”
appears.
OPEN / CLOSE
CD
Q iPod and iPhone
Symptom
Possible cause
Caution:
O
No sound is
produced.
No image
appears on the
TV/monitor.
O
O
The iPod or iPhone is not
playing.
The iPod or iPhone is not
properly connected to the
unit.
Thisoperationwillerasealldatastoredinmemoryincluding
clock, timer settings, tuner preset, and CD program.
Q Condensation
Sudden temperature changes, storage or operation in an
extremely humid environment may cause condensation
inside the cabinet (CD pickup, tape heads, etc.) or on the
transmitter on the remote control. Condensation can cause
the unit to malfunction. If this happens, leave the power on
with no disc (or cassette) in the unit until normal playback
is possible (about 1 hour). Wipe off any condensation on
the transmitter with a soft cloth before operating the unit.
O
O
O
O
Is the AC power cord of the
unit plugged in?
The video cable is not
properly connected.
The TV/monitor’s input
selection is not properly set.
The iPod TV out feature has
not been set to output video.
Q Before transporting the unit
O
iPod or iPhone
will not charge.
O
The iPod or iPhone is not
making full contact with the
connector.
The iPod or iPhone is not
supported.
Remove the iPhone/iPod, USB memory device and disc
from the unit.Then, set the unit to the power stand-by mode.
Carrying the unit with iPhone/iPod or USB memory device
left docked or discs left inside might damage the unit.
O
O
Refer to page 6 for
compatible models.
Maintenance
O
“This accessory
is not made
to work with
iPhone” or
O
O
The iPhone battery is low.
Please charge the iPhone.
iPhone is not properly
docked.
Q Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted
soap solution, then with a dry cloth.
similar, appears
on iPhone
screen.
Caution:
O
Do not use chemicals for cleaning (gasoline, paint thinner,
etc.). It may damage the cabinet.
O
Do not apply oil to the inside of the unit. It may cause
malfunctions.
Q Cleaning the CD pickup lens
In order to ensure proper operation of the CD player,
preventative maintenance (cleaning of the laser pickup
lens) should be performed periodically. Lens cleaners are
commercially available. Contact your local CD software
dealer for options.
E-14
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There
may be some deviations from these values in individual units.
Q USB
USB host interface
Complies with USB 1.1 (Full
Speed)/2.0 Mass Storage Class.
Support Bulk only and CBI
protocol.
Q General
Support file
Bitrate support
Other
MPEG 1 Layer 3
WMA (Non DRM)
Power source
AC 120 V ~ 60 Hz
P W
Power consumption
Dimensions
MP3 (32 ~ 320 kbps)
WMA (64 ~ 160 kbps)
Width: 10 - 1/4" (260 mm)
Height: 13 - 1/2" (344 mm)
Depth: 13 - 1/5" (345 mm)
Maximum total number of MP3/
WMA files is 65025.
Maximum total number of folders is
999 INCLUSIVE of root directory.
The ID3TAG information supported
are TITLE, ARTIST and ALBUM
only.
Weight
P
Q Amplifier
Output power
RMS: Total 240 W (120 W per
channel into 6 ohms at
1 kHz, 10% Total harmonic
distortion.)
FTC: 85 W minimum RMS per
channel into 6 ohms from
200 Hz to 20 kHz, 10%
Total harmonic distortion.
Supports ID3TAG version 1 and
version 2.
File system support
Support USB devices with
Microsoft Windows/DOS/FAT 12/
FAT 16/ FAT 32.
2 kbyte block length for sector.
Output terminals
Input terminals
Front Speakers: 6 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Q Speaker
Front Speaker
Type
Video output : 1 Vp-p
Audio In (audio signal):
500 mV/47 k ohms
2-way type speaker system
2" (5 cm ) tweeter
5 - 1/8" (13 cm) woofer
Q Tuner
Maximum input power 200 W
Rated input power
Impedance
100 W
Frequency range
FM: 87.5 - 108.0 MHz
AM: 530 - 1,710 kHz
6 ohms
Dimensions
Width: 8 - 11/16" (220 mm)
Height: 13 - 1/16" (332 mm)
Depth: 8 - 3/4" (222 mm)
Q CD player
Type
5-disc multi-play compact disc
player
Weight
Subwoofer
Type
6.8 lbs. (3.1 kg) / each
Signal readout
Non-contact, 3-beam
semiconductor laser pickup
Subwoofer system
6 - 5/16" (16 cm) woofer
D/A converter
1-bit D/A converter
20 - 20,000 Hz
90 dB (1 kHz)
Frequency response
Dynamic range
Maximum input power 300 W
Rated input power
Impedance
150 W
4 ohms
Q Cassette deck
Dimensions
Width: 9 - 1/16" (230 mm)
Height: 13 - 1/16" (332 mm)
Depth: 12 - 11/16" (322.5 mm)
Frequency response
Signal/noise ratio
Wow and flutter
Tape speed
50 - 14,000 Hz (normal tape)
50 dB (playback)
Weight
10.1 lbs. (4.6 kg)
0.35% (WRMS)
4.76 cm/sec. (1 - 7/8 ips)
Playback
Heads
E-15
Download from Www.Somanuals.com. All Manuals Search And Download.
|