Sharp Headphones HT SB32D User Manual

MODEL  
HT-SB32D  
SOUND BAR HOME THEATRE SYSTEM  
OPERATION MANUAL  
Thank you for purchasing this SHARP product. To obtain the best performance  
from this product, please read this manual carefully. It will guide you in operating  
your SHARP product.  
/
ON  
-BY  
ST  
A
ND  
TE  
MU  
DE  
MO  
D
WS  
NE  
UN  
SO  
SIC  
MU  
A
EM  
CIN  
UT  
INP  
D
UN  
RO  
SUR  
S
AS  
BYP  
TV  
CH  
L
VO  
L
VO  
SA  
AW  
322  
GA  
MC  
RR  
The Bluetooth® word mark and logos are registered trademarks owned by  
Bluetooth SIG, Inc. and any use of such marks by SHARP is under license. Other  
trademarks and trade names are those of their respective owners.  
The N Mark is a trademark or registered trademark of NFC Forum, Inc. in the  
United States and in other countries.  
Manufactured under license from Dolby Laboratories. Dolby and the double-D  
symbol are trademarks of Dolby Laboratories.  
Note: This product is recommended for flat panel TV (LED, LCD and plasma).  
14K R AS 1  
*TINSEA482AWZZE+*|  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TINSEA482AWZZ  
Precautions  
This unit should only be used within  
the range of 5°C - 35°C (41°F -  
95°F).  
SHARP is not responsible for dam-  
age due to improper use. Refer all  
servicing to a SHARP authorised  
service centre.  
General  
Keep your equipment at least 10 cm  
of free space along the sides, top  
and back for proper ventilation.  
10 cm  
10 cm  
10 cm  
Warning:  
SOUND BAR HOME THEATRE SYSTEM HT-SB32D  
The supplied AC/DC adaptor con-  
tains no user serviceable parts.  
Never remove covers unless quali-  
fied to do so. It contains dangerous  
voltages, always remove mains plug  
from the main outlet socket before  
any service operation or when not  
in use for a long period.  
Use the unit on a firm, level surface  
free from vibration.  
Keep the unit away from direct  
sunlight, strong magnetic fields,  
excessive dust, humidity and elec-  
tronic/electrical equipment (home  
computers, facsimiles, etc.) which  
generate electrical noise.  
The AC/DC adaptor supplied with  
the HT-SB32D must not be used  
with other equipment.  
Do not place anything on top of the  
unit.  
Do not expose the unit to moisture,  
to temperatures higher than 60°C  
(140°F) or to extremely low tem-  
peratures.  
If the unit does not work properly,  
unplug and plug it in again. Then  
turn on the unit.  
In case of an electrical storm, un-  
plug the unit for safety.  
Hold the AC power plug by the  
head when removing it from the wall  
socket, as pulling the lead can dam-  
age internal wires.  
The AC power plug is used as a  
disconnect device and shall always  
remain readily operable.  
Do not remove the outer cover, as  
this may result in electric shock.  
Refer internal service to your lo-  
cal SHARP service facility.  
The ventilation should not be im-  
peded by covering the ventilation  
openings with items, such as news-  
papers, tablecloths, curtains, etc.  
No naked flame sources, such as  
lighted candles, should be placed  
on the apparatus.  
Attention should be drawn to the  
environmental aspects of battery  
disposal.  
Never use an AC/DC adaptor other  
than the one specified. Otherwise,  
problem or serious hazards may be  
created.  
The voltage used must be the same  
as that specified on this unit. Using  
a higher voltage is dangerous and  
may result in a fire or other type of  
accident causing damage. SHARP  
will not be held responsible for any  
damage resulting from such usage.  
In case of repairing, please bring  
the entire system set to the service  
centre.  
Volume control  
The sound level at a given volume  
setting depends on speaker efficiency,  
location and various other factors.  
It is advisable to avoid exposure to  
high volume levels, which occurs  
while turning the unit on with the  
volume control setting up high, or while  
continually listening at high volumes.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls and indicators  
Front Panel  
SOUND BAR HOME THEATRE SYSTEM HT-SB32D  
1
2
3 4 5 6 7  
8 9 1011 12 13  
14  
1. Left Channel Speakers  
10. Volume Down Button  
11. Volume Up Button  
12. Audio Format Indicator  
13. Remote Sensor  
2. Right Channel Speakers  
3. On/Standby/Input Indicator  
4. On/Standby Button  
5. Input Button  
14. NFC detection area  
6. Pairing Button  
7. Pairing Indicator  
8. Surround Indicator  
9. Surround Button  
Rear Panel  
1. DC In Socket  
2. Optical In Socket  
3. Audio In Socket  
1
2
3
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Controls and indicators (continued)  
Remote Control  
1
ON/  
MUTE  
STAND-BY  
1. Remote Control Transmitter  
2. Mute Button  
2
12  
13  
SOUND MODE  
MUSIC  
CINEMA  
NEWS  
INPUT  
3. Cinema (Sound Mode) button  
4. Music (Sound Mode) button  
5. Surround Button  
3
4
5
6
BYPASS SURROUND  
14  
6. Bypass (Sound Mode) button  
7. TV Operation Buttons (only SHARP TV)  
8. Bluetooth Pairing Button  
9. Bluetooth Play/Pause Button  
10. Bluetooth Skip Up Button  
11. Bluetooth Skip Down Button  
12. On/Standby Button  
13. News (Sound Mode) button  
14. Input Button  
15. Volume Up/Down Buttons  
TV  
VOL  
CH  
7
8
9
VOL  
15  
10  
11  
RRMCGA322AWSA  
Remote control  
Plastic shield  
Note:  
Before using remote control, please remove  
plastic shield at battery holder.  
Battery holder  
TV Operation Buttons (Only SHARP TV):  
On/Standby  
Button  
Sets the TV power to  
“ON” or “STANDBY”.  
Input Select  
Button (TV)  
Press the button to  
switch the input source.  
Volume Up  
and Down  
Buttons  
Turn up/down the TV  
volume.  
Channel Up and  
Down Buttons  
Switch up/down the TV  
channels.  
VOL  
CH  
Note:  
Some models of SHARP TV may not be operable.  
SHARP TV remote control will not work with HT-SB32D system.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
System preparation  
Make sure to unplug the AC power lead before in-  
stalling the sound bar or changing the position.  
Installing the sound bar  
1
Fix the pattern paper to the wall in hori-  
zontal position as below.  
Using spike legs  
5485m09mmm  
1
Peel the double sided tape separator.  
44 mm  
Wall surface  
Double sided  
tape separator  
Spike leg  
Pattern paper  
(supplied)  
2
Fix the spike leg onto the sound bar as  
shown.  
2
Make a hole on the wall following the screw  
point marks on the pattern paper by using  
a drill.  
Bottom of  
sound bar  
32 mm  
8-9 mm  
Wall surface  
3
4
Fix a wall mount plug into the hole using  
a hammer, until it is flush with the wall  
surface.  
To mount the sound bar on the wall  
Caution:  
32 mm  
Be very careful to prevent the sound bar [2.3 kg  
(5.1 lbs.)] from falling when mounting on the wall.  
Before mounting, check the wall strength. (Do not  
put on the veneer plaster or whitewashed wall. The  
sound bar may fall.) If unsure, consult a qualified  
service technician.  
8-9 mm  
Wall surface  
Fastenthescrewstothewallasshownbelow.  
(Total screw is 2 pieces)  
Mounting screws are not supplied. Use appropri-  
ate ones.  
Check all wall mount angle screws for looseness.  
Select a good location. If not, accidents may occur  
or the sound bar may get damaged.  
SHARP is not responsible for accidents result-  
ing from improper installation.  
Screw using  
screwdriver  
Wall surface  
4.5 mm - 5 mm  
Gap from wall  
surface  
Driving screws  
SHARP designed the sound bar so you may hang  
it on the wall. Use proper screws (not supplied).  
Wall surface  
5
Hang the sound bar onto the screws.  
See below for size and type.  
3.2 mm  
5 mm  
9 mm  
22 mm  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Placing the sound bar  
Installation image:  
Notes:  
Remove the protective film covering  
the sound bar before turning on the  
system.  
TV  
The front panel of the sound bar is  
not removable.  
Place the  
sound  
bar as  
shown.  
Caution:  
Do not change the installation  
direction when the sound bar is  
turned on.  
S
O
U
N
D
B
A
R
H
O
M
E
T
H
E
A
T
R
E
S
Y
S
T
E
M
H
T
-
S
B
3
2
D
Do not stand or sit on the sound bar  
as you may be injured.  
DVD player  
VCR  
Falling prevention  
Safety wires (not supplied) are useful to prevent the sound bar from falling.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Falling prevention (continued)  
When mounting on the wall  
Screw eye (not supplied)  
Safety wires  
(not supplied)  
SOUND BAR HOME THEATRE SYSTEM HT-SB32D  
Sound bar  
Wall  
When placing on the shelf/table  
Sound bar  
Screw eye  
(not supplied)  
Safety wires  
(not supplied)  
Rack/  
table  
Screw eye  
(not supplied)  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Sound bar connections to TVs  
Caution:  
Turn off all other equipment before making any connections.  
Notes:  
To connect to TV/player, use AUDIO IN or OPTICAL IN terminals located at the  
rear of the sound bar.  
Refer the operation manual of the equipment to be connected.  
Fully insert the plugs to avoid fuzzy pictures or noises.  
If the TV volume is continuously at low level, the sound bar will automatically  
power off. Increase the TV output volume to enjoy the sound from the speaker.  
Connecting a TV, or DVD player, etc.  
If the TV/monitor has an audio or optical output, connect it to the AUDIO IN socket  
or OPTICAL IN socket on the rear of the sound bar.  
Press the INPUT button repeatedly to select:  
Function  
On/Standby/Input  
Indicator  
OPTICAL IN  
AUDIO IN  
Bluetooth  
Turns green  
Turns cyan  
Turns blue  
TV  
To audio output terminals  
or  
To optical  
digital audio  
output  
Blu-Ray/DVD player/  
Digital Tuner  
terminal  
Optical digital  
audio cable  
Audio cable  
(commercially  
available)  
To AUDIO IN  
input terminal  
To OPTICAL IN  
(optical) input  
terminal  
Sound bar  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
AC power connection  
After checking all the connections have been made correctly, connect the AC power  
lead to the AC power input socket, then to the wall socket.  
Using with the AC/DC adaptor  
1 Plug the AC power lead into the AC/DC adaptor.  
2 Plug the AC/DC adaptor cable into the DC INPUT socket on the sound bar.  
3 Plug the AC power lead into an wall socket. The PAIRING indicator turns  
BLUE.  
Notes:  
Unplug the AC/DC adaptor from the wall socket if the sound bar will not be used  
for a prolonged period of time.  
Use only the supplied AC/DC adaptor. Using other AC/DC adaptor may cause an  
electric shock or fire.  
Make sure to unplug the AC power lead before making any connections.  
AC/DC Adaptor  
2
Cable  
DC IN socket  
(DC 17V)  
Wall socket  
(AC 100 - 240 V ~  
1
50/60 Hz)  
AC/DC Adaptor  
AC power lead  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote control  
Notes concerning use:  
Battery installation  
Replace the battery if the operating distance  
is reduced or if the operation becomes er-  
ratic. Purchase “CR 2025”, coin lithium  
battery.  
Periodically clean the transmitter on the re-  
mote control and the sensor on the sound  
bar with a soft cloth.  
Exposing the sensor on the sound bar to  
strong light may interfere with operation.  
Change the lighting or the direction of the  
sound bar if this occurs.  
Keep the remote control away from mois-  
ture, heat, shock, and vibrations.  
1
While pushing the locking tab to-  
wards the center of the remote con-  
trol, slide out the battery holder.  
Back of  
remote control  
Locking  
tab  
2
Remove the old battery from the  
battery holder, insert the new bat-  
tery and then slide the battery hold-  
er back into the remote control.  
Test of the remote control  
The remote control can be used within the range  
shown below:  
Remote sensor  
Battery holder  
Positive (+)  
side up  
Polarity (+)  
symbol  
SOUND BAR HOME THEATRE SYSTEM HT-SB32D  
Battery type  
Locking tab  
0.2 m - 6 m  
Precautions for battery use:  
ON/  
MUTE  
STAND-BY  
Remove the battery if the sound bar will not be  
used for a long period of time. This will prevent  
potential damage due to battery leakage.  
SOUND MODE  
MUSIC  
CINEMA  
NEWS  
BYPASS SURROUND  
INPUT  
Caution:  
Do not use rechargeable battery (nickel-  
cadmium battery, etc.).  
Danger of explosion if battery is incorrectly  
replaced.  
Replace only with the same or equivalent  
type.  
Batteries (battery pack or batteries installed)  
shall not be exposed to excessive heat such  
as sunshine, fire or the like.  
Installing the battery incorrectly may cause  
the sound bar to malfunction.  
Download from Www.Somanuals.co1m1. All Manuals Search And Download.  
General control  
Notes:  
To turn the power on  
Press the ON/STANDBY button.  
The On/Standby/Input Indicator lights up  
according to input source:  
Input source On/Standby/Input  
Indicator  
When volume is maximum or minimum the  
SURROUND indicator blinks 3 times  
To increase or decrease the volume  
continuously, press and hold the VOLUME  
+/- buttons (main unit) or VOL +/- buttons  
(remote control).  
OPTICAL IN Turns green  
Muting  
AUDIO IN  
Turns cyan  
Turns blue  
The volume is muted temporarily when  
pressing the MUTE button on the remote  
control (SURROUND indicator blinking).  
Press again to restore the volume.  
Bluetooth  
Note:  
If the power does not turn on, check  
whether the power lead is plugged in  
properly.  
To set the sound bar to standby mode:  
Press the ON/STANDBY button again. The  
PAIRING indicator turns BLUE.  
Surround  
When the SURROUND button is pressed,  
the SURROUND sound is ON. (SURROUND  
indicator lights up (ORANGE))  
Sound Mode  
Remote control operation:  
Press the desired sound mode button on  
the remote control.  
The SURROUND indicator blinks once  
CINEMA (for cinema sound effect)  
Bluetooth standby mode  
The first time the unit is plugged in, it  
will enter the Bluetooth standby mode  
(PAIRING indicator turns BLUE)  
.
To cancel the Bluetooth standby mode,  
press and hold the ON/STANDBY button  
during Bluetooth standby mode. The unit  
will enter the low power consumption  
mode (PAIRING indicator turns off).  
During low power consumption mode, to  
return to the Bluetooth standby mode,  
press the ON/STANDBY button twice.  
During Bluetooth standby condition,  
NFC function is activated once your  
device touches the NFC detection area  
or the supplied NFC tag.  
MUSIC (for standard sound effect)  
NEWS  
(for news)  
BYPASS (for flat sound effect)  
Function  
When the INPUT button is pressed, the  
input source will change.  
1 Optical In Function - the On/Standby/  
Input indicator turns green.  
Volume auto fade-in  
If you turn off and on the sound bar again,  
volume will start at lower level and gradually  
increase to the last set level.  
2 Audio In Function - the On/Standby/  
Input indicator turns cyan.  
3 Bluetooth Function - the On/Standby/  
Input indicator turns blue.  
Note:  
Volume control  
The backup function will protect the  
memorised function mode for a few hours  
should there be a power failure or the AC  
power lead becomes disconnected.  
Sound bar operation:  
Press volume up (VOLUME + ) to increase the  
volume and press volume down (VOLUME – )  
to decrease the volume.  
Remote control operation:  
Press the VOL + button to increase the  
volume and the VOL – button to decrease  
the volume.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
General control (continued)  
Auto power on function  
Auto power off and auto  
detect signal  
The sound bar will automatically go to  
standby mode (PAIRING indicator turns  
blue) if:  
Optical In: No audio signal is detected  
after approximately 15 minutes.  
Audio In: No audio signal is detected  
after approximately 15 minutes.  
Bluetooth:  
No connection after approximately 1  
minute.  
In the pause or stop mode and no  
incoming signal from device after  
approximately 15 minutes.  
Auto power on function works only  
during Bluetooth standby mode (PAIRING  
indicator is blue). It will not work if the  
sound bar is in low power consumption  
mode (PAIRING indicator is off).  
Optical In: Turn off the external source.  
The sound bar will automatically power  
ON if the external source is turned ON  
again.  
Audio In/Bluetooth: The sound bar will  
automatically power ON if it detects audio  
signal from connected equipment.  
-
-
Audio format  
During the OPTICAL IN function the AUDIO FORMAT indicator will light up to  
indicate the audio format.  
Audio format  
Audio format indicator  
Dolby Digital  
One of the digital audio systems for  
theatrical use. You can also enjoy  
the stereophonic effect in the home  
theatre system.  
Blue  
Lights up when detecting Dolby  
Digital signal.  
PCM  
(Pulse Code  
Modulation)  
This is a general term for digitally  
encoded audio signals on a CD or  
DVD.  
Violet  
This sound bar lets you enjoy  
playback of digital signals from  
sources such as CD or DVD.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Bluetooth one touch connection via NFC  
Unlike other wireless technology, NFC  
About NFC technology  
requires no discovery or pairing.  
Near Field Communication (NFC) is a set of  
standards for devices (smartphones/tablets)  
to establish radio communication with each  
other by touching/tapping them together or  
bringing them into close proximity.  
Using NFC in this product simplifies the  
pairing method of Bluetooth connectivity.  
Simply tap the source device to NFC  
detection area on the main unit or the  
NFC tag to instantly enjoy seamless  
connectivity between your smart device  
and the audio system.  
NFC detection area  
Notes for Android devices  
NFC detection area location may vary  
depending on the device (smartphone/  
tablet). Refer operation manual of the  
device for detail.  
This audio system supports NFC-  
enabled device with Android 4.1, Jelly  
Bean and higher.  
For device with a lower Android version,  
refer the operation manual of the device  
for recommended app (application).  
to  
Switch ‘ON’  
Bluetooth  
SOUND BAR HOME THEATRE SYSTEM HT-SB32D  
A Bluetooth  
audio source  
device  
(smartphone/  
tablet).  
SOUND BAR HOT-SB32D  
or  
HT-SB32D  
NFC detection area  
NFC tag  
(during Bluetooth standby mode)  
NFC tag set up  
The NFC tags can be placed anywhere  
convenient to you. The velcro tapes supplied  
will help to secure the tags onto the desired  
location.  
Important:  
NFC tag has unique ID for each sound  
bar.  
SHARP will not be held liable for the  
damages caused by rewriting the tags.  
Caution:  
Make sure that the NFC tag is placed on a  
flat and level surface.  
If you choose not to use the velcro  
tape, do not place the NFC tag near  
metal surface to avoid connection  
interference during tagging.  
Keep all small parts away from  
childrenastheymaybeaccidentally  
swallowed.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Bluetooth one touch connection via NFC (continued)  
1
Peel the separator off the velcro tape (loop  
type) and stick it on a desired surface.  
Then place the tag onto the desired location.  
Velcro  
tape  
Separator  
(hook  
type)  
Separator  
Velcro tape  
(loop type)  
rear view of the NFC tag  
2
Peel the separator off the velcro tape (hook  
type) and stick it to the rear of the NFC tag.  
NFC connection for audio playback  
Check that:  
1
Your device (smartphone/tablet) has an NFC function.  
NFC function on your device is enabled.  
Screen lock function of the device is off.  
This unit is not in low power consumption mode.  
Your device and NFC tag must be within 10 metres from the unit.  
Touch your device to the NFC detection area on the main unit or supplied NFC tag. (NFC detection  
area of your device must touch to the NFC detection area of the main unit or supplied NFC tag.)  
NFC  
detection  
or  
NFC  
tag  
area  
Main  
unit  
SOUND BAR HOME THEATRE SYSTEM HT-SB32D  
Device  
2
A pop-up window asking whether to proceed with the Bluetooth connection appears on  
the device. Select <YES>.  
The ‘connected’ message appears when the connection is complete.  
3
Playback will start automatically, otherwise press play (on remote control or source  
device).  
Sound will be heard from the speakers of this unit via audio streaming.  
Your device and NFC tag must be within 10 metres from the unit.  
Bluetooth operation buttons (remote control only)  
Press the button to play or pause.  
Press the button to skip up.  
Press the button to skip down.  
Notes:  
It takes about 6-8 seconds for a Bluetooth enabled  
device (eg. smartphone) to establish Bluetooth  
connection with this unit via NFC or manual  
connection.  
If “Empty tag” or similar message appears on  
your device, touch the device again to the NFC  
detection area on the main unit or supplied NFC  
tag.  
To disconnect, simply touch your device to the  
NFC detection area on the main unit or the NFC  
tag again.  
To listen to audio via Bluetooth connectivity without  
NFC tag - refer “Pairing with other Bluetooth  
source devices” on page 16.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listening to Bluetooth enabled devices  
Bluetooth wireless technology is a short-range radio  
Pairing with other Bluetooth  
source device  
technology that enables wireless communication  
between various types of digital devices, such as  
mobile phone or computer. It operates within a range  
of about 10 metres (30 feet) without the hassle of  
having to use cables to connect these devices.  
1
2
3
Press the ON/STANDBY button to turn the  
power on.  
Press the INPUT button to select Bluetooth  
function. (PAIRING indicator blinks.)  
Press and hold the PAIRING button for 3 sec-  
onds or more.  
PAIRING indicator blinks quickly. The sound bar is  
now in pairing mode and is ready to be paired with  
other Bluetooth source device.  
Perform pairing procedure on the source device  
to detect this sound bar. HT-SB32D SHARP”  
will appear in the detected devices list (if avail-  
able) in the source device. (Refer the source  
device operating manual for details).  
This sound bar supports the following:  
Communication System: Bluetooth Specification  
version 2.1 Bluetooth + Enhanced Data Rate  
(EDR).  
Support Profile : A2DP (Advanced Audio Distribution  
Profile) and AVRCP (Audio/Video Remote Control  
Profile)  
Notes when using unit with a mobile phone  
4
This unit cannot be used to talk over the  
telephone even when there is  
a
Bluetooth  
connection made to a mobile phone.  
Please refer to the operating manual supplied  
with the mobile phone for details on operation of  
your mobile phone while transmitting the sound  
using a Bluetooth connection.  
Notes:  
Place the devices to be paired within 1 metre  
(3 feet) of each other when pairing.  
Some source devices are unable to display lists of  
detected devices. To pair this sound bar with the  
source device, refer to the source device operat-  
ing manual for details.  
Select “HT-SB32D SHARP” from the source list.  
If Passcode* is required, enter “0000”.  
* Passcode may be called PIN Code, Passkey, PIN  
number or Password.  
Pairing indicator (blue) will stop blinking once the  
sound bar is successfully paired with the source  
device. (Pairing information is now memorised  
in the sound bar.)  
Some audio source devices may connect with the  
sound bar automatically after pairing is completed,  
otherwise follow the instructions in the source device  
operating manual to start connection.  
Press the play button on remote control or  
source device to start Bluetooth streaming  
playback.  
Pairing Bluetooth devices  
Bluetooth devices need to be initially paired first  
before they can exchange data. Once paired, it is  
not necessary to pair them again unless:  
pairing is made with more than 99 devices.  
Pairing can only be made one device at  
5
6
a
a
time. This sound bar can be paired to  
maximum of 99 devices. If subsequent  
device is paired, the oldest device paired, will  
be deleted and replaced with the new one.  
pairing information is deleted while repairing,  
etc.  
Bluetooth indicators  
Status  
PAIRING indicator (blue)  
Unconnected  
Pairing mode  
Connected  
Blinks  
Blinks quickly  
Lights up  
7
However, the indicator status is not displayed  
during low power consumption mode.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Listening to Bluetooth enabled devices (continued)  
Notes:  
Pairing of this sound bar and the source device  
is completed.  
Sound bar is in connected mode (pairing  
indicator (BLUE) lights up.)  
Any device connected to the AUDIO IN or  
OPTICAL IN socket is turned off.  
If a device such as microwave oven, wireless  
LAN card, Bluetooth device or any other device  
that uses the same 2.4 GHz frequency is placed  
near the system some sound interruption may  
be heard.  
The transmission distance of the wireless  
signal between the device and the sound bar  
is about 10 m, but may vary depending on  
your operating environment. If a steel concrete  
or metallic wall is between the device and the  
sound bar, the system may not operate at all,  
because the wireless signal cannot penetrate  
metal.  
1
Press the ON/STANDBY button to turn the  
power on.  
2
3
4
Press the INPUT button to select Bluetooth  
function.  
Start the Bluetooth connection from the  
Bluetooth stereo audio source device.  
Playback will start automatically, otherwise  
press play (on the remote control or the  
source device).  
If this sound bar or the source device is turned  
off before Bluetooth connection is completed,  
pairing will not be completed and the pairing  
information will not be memorised. Repeat step  
1 onwards to start pairing again.  
To pair with other devices, repeat steps 1 - 5  
for each device.  
Notes:  
For various Bluetooth operations, refer “NFC  
connection for audio playback” on page 15.  
If the source device has an extra bass  
function or equaliser function, set them to  
off. If these functions are on, sound may be  
distorted.  
This sound bar can be paired to a maximum  
of 99 devices. If subsequent device is paired,  
the oldest device paired, will be deleted and  
replaced with the new one.  
Notes:  
Make the Bluetooth connection again if the  
Once a device is ousted or deleted from the  
pairing list, the pairing information for the  
device is also deleted. To listen to the sound  
from the device again, it needs to be re-paired.  
Perform steps 1 - 5 to pair the device again.  
HT-SB32D supports Bluetooth profile AVRCP  
1.4. If your device supports the same profile  
(refer to device manufacturer’s specification),  
HT-SB32D is able to control the volume of  
the device.  
source device is not turned on, or its Bluetooth  
functionality is off or is in sleep mode.  
To disconnect the Bluetooth  
device  
Perform any of the followings.  
- Disconnect the Bluetooth connection on the  
audio source device.  
Note:  
Refer the operating manual supplied with the  
device.  
Some music applications do not support  
this feature, hence there will be no volume  
synchronisation between your device and  
the sound bar even if your Bluetooth device  
supports such profile.  
- Turn off the Bluetooth stereo audio source  
device.  
- Turn off this sound bar.  
Note:  
The volume of this sound bar may not be controlled  
as intended depending on the device.  
Listening to the sound  
Check that:  
The source device Bluetooth functionality is  
ON.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting chart  
Many potential problems can be resolved by the  
owner without calling a service technician.  
If something is wrong with this product, check the  
following before calling your authorised SHARP  
dealer or service center.  
No sound is  
heard.  
Is the sound bar too far  
from the Bluetooth stereo  
audio source device?  
Is the sound bar paired with  
the Bluetooth stereo audio  
source device?  
General  
Is the Bluetooth stereo  
audio source device in  
playback condition?  
Symptom  
Possible cause  
Is a headphone plugged to  
the Bluetooth stereo audio  
source device?  
No sound is  
heard.  
Is the input signal (selection)  
set properly?  
Is the volume level set to  
minimum?  
Bluetooth  
sound is  
interrupted or  
distorted.  
Is the sound bar too near  
to a device that generates  
electromagnetic radiation?  
Is there any obstacle  
between the sound bar and  
the Bluetooth stereo audio  
source device?  
Is muting activated?  
Are the connections made  
correctly?  
Noise is  
Move the sound bar away  
from any computers or  
mobile phones.  
heard during  
playback.  
Sound is  
distorted.  
TV output sound is  
distorted.  
Reduce the TV volume or  
sound bar volume.  
Remote control  
Symptom  
Possible cause  
When a button  
is pressed,  
the sound  
Set this sound bar to the  
standby mode and then  
turn it back on.  
The remote  
control does  
not operate  
properly.  
Is the battery polarity  
correct?  
Is the battery dead?  
Is the distance or angle  
incorrect?  
bar does not  
respond.  
If the sound bar still  
malfunctions, reset it.  
(Refer to page 19.)  
Are there any obstructions  
in front of the sound bar?  
Is there a strong light  
shining on the remote  
sensor?  
Is the remote control for  
another equipment used  
simultaneously?  
The power is  
not turned on.  
Is the sound bar  
unplugged? (Refer to  
page 10.)  
The protection circuit may  
be activated. Unplug and  
plug in the power lead again  
after 5 minutes or more.  
The sound  
bar cannot be  
turned on with  
the remote  
control.  
Is the AC power lead of the  
sound bar plugged in?  
Is the battery inserted?  
Has the plastic shield at  
the remote control battery  
holder been removed?  
NFC / Bluetooth  
Symptom  
Possible cause  
NFC-enabled  
device cannot  
connect to  
Bluetooth via  
NFC tag.  
Main unit is not in Bluetooth  
pairing mode. Perform  
“NFC connection for audio  
playback”. (Refer page 15.)  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting chart  
Specifications  
As part of our policy of continuous improve-  
ment, SHARP reserves the right to make  
design and specification changes for product  
improvement without prior notice. The perform-  
ance specification figures indicated are nominal  
values of production unit. There may be some  
deviations from these values in individual unit.  
Condensation  
Sudden temperature changes, storage or operation  
in an extremely humid environment may cause  
condensation inside the cabinet or on the transmitter  
on the remote control.  
Condensation can cause the sound bar to malfunc-  
tion. If this happens, leave the power on until normal  
operation is possible (about 1 hour). Wipe off any  
condensation on the transmitter with a soft cloth  
before operating the sound bar.  
General  
Power source DC IN 19V  
3.42A: AC/DC  
adaptor  
Factory reset, clearing all setting  
(AC 100 - 240V ~ 50/60Hz)  
Make sure to disconnect all audio input cables  
attached to the sound bar before performing the  
factory reset.  
Power  
Power on: 10 W  
consumption  
Power standby: 0.4 W (*1)  
Power standby: < 2 W (*2)  
1. PressON/STANDBYbuttontoenterthepower  
standby mode.  
Maximum  
MPO: 60 W (30 W + 30 W)  
output power (10% T.H.D.)  
2. While pressing down the PAIRING button,  
press the ON/STANDBY button.  
RMS: 30 W (10% T.H.D.)  
RMS: 24 W (1% T.H.D.)  
3. Press the ON/STANDBY button again.  
(PAIRING indicator will turn BLUE.)  
Caution:  
Speaker  
2-way Speaker System  
5.7cm Woofer  
2.5cm Soft Dome  
This operation will erase all data stored in memory.  
If problem occurs during operation  
Input  
Analog input (AUDIO IN):  
Stereo mini socket Ø 3.5mm  
500mV / 47kohms  
terminals  
When this product is subject to strong external inter-  
ference (mechanical shock, excessive static electric-  
ity, abnormal supply voltage due to lightning, etc.) or if  
it is operated incorrectly, it may malfunction.  
Optical digital input  
(OPTICAL): Square type x 1  
Bluetooth  
Frequency  
Band  
2.400GHz - 2.480GHz  
If such a problem occurs, do the following:  
1
Set the sound bar to the standby mode  
and turn the power on again.  
2
If the sound bar is not restored in the  
previous operation, unplug and plug in the  
sound bar, and then turn the power on.  
Compatible  
Bluetooth  
Profile  
A2DP (Advanced Audio  
Distribution Profile), AVRCP  
(Audio/Video Remote Control  
Profile)  
Maintenance  
Bluetooth 2.1 +EDR  
Dimensions  
Width: 940mm  
Height: 73mm  
Depth: 83mm  
Cleaning the cabinet  
Periodically wipe the cabinet with a soft cloth.  
Cautions:  
Weight  
2.3 kg (5.1 lbs.)  
Do not use chemicals for cleaning (petrol, paint  
thinner, etc.). It may damage the cabinet finish.  
Do not apply oil to the inside of each component.  
It may cause malfunctions.  
(*1): This power consumption value is obtained when  
the sound bar is in low power consumption  
mode.  
(*2): This power consumption value is obtained in the  
Bluetooth Standby mode.  
SOUND BAR HOME THEATRE SYSTEM HT-SB32D  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For Australia and New Zealand customers  
SHARP  
FOR LOCATION ENQUIRIES WITHIN  
AUSTRALIA  
REGARDING YOUR LOCAL  
SHARP APPROVED SERVICE CENTRE  
VISIT OUR WEBSITE AT  
OR CALL SHARP CUSTOMER CARE  
1300 135 022  
(LOCAL CALL COSTS APPLY WITHIN AUSTRALIA)  
SHARP CORPORATION OF AUSTRALIA PTY LTD  
SHARP  
FOR LOCATION ENQUIRIES WITHIN  
NEW ZEALAND  
REGARDING YOUR LOCAL  
SHARP APPROVED SERVICE CENTRE  
VISIT OUR WEBSITE AT  
CONTACT YOUR SELLING DEALER/RETAILER  
OR CALL  
SHARP CUSTOMER SERVICES  
TELEPHONE: 09 573 0111  
FACSIMILE: 09 573 0113  
SHARP CORPORATION OF NEW ZEALAND LIMITED  
SPform019(AUGUST 2011)  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
For Australia and New Zealand customers  
WARRANTY  
Consumer Electronic Products  
Congratulations on Your Purchase!  
This Sharp product is warranted against faults in material and manufacture for the  
period as stated in the table below.  
If service is required during the warranty period, please contact your nearest Sharp  
Approved Service Centre. These repairs would be carried out at no charge to the  
owner, subject to the conditions specified herein.  
This warranty does not extend to defects or injuries caused by or resulting from causes  
not attributable to faulty parts or the manufacture of the product, including but not  
limited to, defect or injury caused by or resulting from misuse, abuse, neglect, lack of  
maintenance, accidental damage, improper voltage, liquid spillage, vermin infestation,  
software, or any alterations made to the product which are not authorised by Sharp.  
Please retain your sales documentation, as this should be produced to validate a  
warranty claim. This warranty is in addition to and in no way limits, varies or excludes  
any implied rights and remedies under any relevant legislation in the country of sale.  
This warranty does not cover transportation to and from the Sharp Approved Service  
Centre. Goods presented for repair may be replaced by refurbished goods of the same  
type rather than being repaired. Refurbished parts may be used to repair the goods.  
The repair of your goods may result in the loss of user generated data, please ensure  
that you have saved this data elsewhere prior to repair.  
Australian customers: Our goods come with guarantees that cannot be excluded  
under the Australian Consumer Law. You are entitled to a replacement or refund  
for a major failure and for compensation for any other reasonably foreseeable  
loss or damage. You are also entitled to have the goods repaired or replaced  
if the goods fail to be of acceptable quality and the failure does not amount  
to a major failure. The criteria of a major failure is defined in the Australian  
Consumer Law. Should you require any assistance with a major failure please  
contact Sharp Customer Care.  
WARRANTY PERIODS  
Home Theatre Projector 12 months  
(excluding lamps and air filters)  
Audio/Home Theatre  
Microwave Oven  
Steam Oven  
Refrigerator  
DVD/Blu-ray  
12 months  
12 months  
12 months  
24 months  
12 months  
60 months  
Air Conditioner  
Portable Air Conditioner 12 months  
LCD Television  
Air Purifier  
Vacuum Cleaner  
12 months  
12 months  
24 months  
SPform 040 (JUNE 2012)  
IMPORTANT NOTICE: This warranty applies only to products sold in Australia & New Zealand  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sherwood DVD Player VD 4502 User Manual
Sibir Optics Refrigerator V 110 GE User Manual
Snapper Lawn Mower 12RTG Series User Manual
Soleus Air Electric Heater 3077997 User Manual
Sony DVD VCR Combo SLV D900E User Manual
Sony eBook Reader PRS 650 User Manual
Sony Ericsson Telephone Dialog 3213 User Manual
Sun Microsystems Yogurt Maker Ct 900 User Manual
Sylvania TV DVD Combo 6519DA User Manual
Tannoy Speaker VS15 BP User Manual