Sharp Flat Panel Television C 32LE360EN User Manual
LC-32LE360EN / LC-32LE361EN  
LC-32LE361K / LC-32LE362EN  
LC-32LE363EN / LC-40LE360EN  
LC-40LE361EN / LC-40LE361K  
LC-40LE362EN / LC-40LE363EN  
LCD COLOUR TELEVISION  
LCD-FARB-TV  
TÉLÉVISEUR LCD COULEUR  
TELEVISIONE A COLORI LCD  
TELEVISOR LCD A COLOR  
TELEVISÃO LCD A CORES  
OPERATION MANUAL  
BEDIENUNGSANLEITUNG  
MODE D’EMPLOI  
MANUALE DI FUNZIONAMENTO  
MANUAL DE INSTRUCCIONES  
MANUAL DE INSTRUÇÕES  
KULLANIM KILAVUZU  
LCD RENKLİ TELEVİZYON  
LCD FÄRG-TV  
BRUKSANVISNING  
LCD FARGE-TV  
LCD FARVE-TV  
LCDVÄRI-TV  
BRUKERHÅNDBOK  
BRUGSANVISNING  
KÄYTTÖOHJE  
LCD KLEURENTELEVİSİE  
ΧΕΙΡΟΚΊΝΗΤΗ ΛΕΙΤΟΥΡΓΊΑ  
TELEVIZOR LCD COLOR  
GEBRUIKSAANWIJZING  
ΧΕΙΡΟΚΊΝΗΤΗ ΛΕΙΤΟΥΡΓΊΑ  
MANUAL DE UTILIZARE  
BAREVNI LCD TELEVİZOR  
NÁVOD K POUŽİTÍ  
LCD SZÍNES TELEVÍZİÓ  
LCD COLOUR TELEVISION  
HASZNÁLATI ÚTMUTATÓ  
OPERATION MANUAL  
LCD TELEVIZOR U BOJI  
BARVNİ LCD TELEVİZOR  
LCD COLOUR TELEVISION  
KORISNIČKI PRIRUČNIK  
NAVODILA ZA UPORABO  
OPERATION MANUAL  
LCD TELEVİZOR U BOJİ  
LCD ЦВЕТНЫЕ ТЕЛЕВИЗОРЫ  
PRIRUČNIK O RADU  
ИНСТРУКЦИЯ ПО ЭКСПЛУАТАЦИИ  
ЦВЕТЕН LCD ТЕЛЕВИЗОР  
РЪКОВОДСТВО ЗА ЕКСПЛОАТАЦИЯ  
КОЛЬОРОВИЙ РК-ТЕЛЕВІЗОР  
КАЛЯРОВЫ ВК-ТЭЛЕВIЗАР  
ПОСІБНИК З КОРИСТУВАННЯ  
ІНСТРУКЦЫЯ ПА ЭКСПЛУАТАЦЫІ  
SPALVOTAS LCD TELEVIZORIAUS  
NAUDOTOJO VADOVAS  
LCD KRĀSU TELEVIZORS  
LCD VÄRVITELEVIISOR  
LCD 
מסך
 
עם
 
צבעונית
 
טלוויזיה
 
LIETOŠANAS INSTRUKCIJA  
KASUTUSJUHEND  
ה
הפעל
 
מדריך
 
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV - Features  
• Remote controlled colour LED TV.  
• Fully integrated digital/cable TV (DVB-T-T2/C-  
S-S2).  
HD DVB-T/C/S2(MPEG4) :  
LC-40LE362EN / LC-32LE362EN  
HD DVB-T2/C/S2(MPEG4) :  
LC-40LE363EN / LC-32LE363EN  
HD DVB-T/CABLE(MPEG4) :  
LC-40LE360EN / LC-32LE360EN  
HD DVB-T2/CABLE(MPEG4) :  
LC-40LE361EN / LC-32LE361EN  
HD DVB-T2/CABLE(MPEG4):  
LC-40LE361K / LC-32LE361K  
SPECIAL NOTE FOR USERS IN THE U.K.  
The mains lead of this product is fitted with a non-  
rewireable (moulded) plug incorporating a 5A fuse.  
Should the fuse need to be replaced, a BSI or ASTA  
ASA  
approved BS 1362 fuse marked  
or  
and of the  
same rating as above, which is also indicated on the  
pin face of the plug, must be used.  
Always refit the fuse cover after replacing the fuse.  
Never use the plug without the fuse cover fitted.  
• DVB-T2, DVB-S/S2 compliance and support is  
depending on the model  
In the unlikely event of the socket outlet in your home  
not being compatible with the plug supplied, cut off  
the mains plug and fit an appropriate type.  
• HDMI connectors for digital video and audio.This  
connection is also designed to accept high definition  
signals.  
DANGER:  
• USB input.  
The fuse from the cut-off plug should be removed and  
the cut-off plug destroyed immediately and disposed  
of in a safe manner.  
• Programme recording.  
• Programme timeshifting.  
• 1000 programmes.  
• OSD menu system.  
Under no circumstances should the cut-off plug be  
inserted elsewhere into a 5A socket outlet, as a  
serious electric shock may occur.  
• Scart socket for external devices (such as video, video  
To fit an appropriate plug to the mains lead, follow the  
games, audio set, etc.).  
instructions below:  
• Stereo sound system.  
IMPORTANT:  
• Teletext, fastext, TOP text.  
• Headphone connection.  
The wires in the mains lead are coloured in accordance  
with the following code:  
• Automatic programming system.  
• Forward or backward manual tuning.  
• Automatic power down after up to eight hours.  
• Sleep timer.  
Blue: Neutral  
Brown: Live  
As the colours of the wires in the mains lead of this  
product may not correspond with the coloured  
• Child lock.  
• Automatic sound mute when no transmission.  
• NTSC playback.  
markings identifying the terminals in your plug,  
proceed as follows:  
• AVL (Automatic Volume Limiting).  
• PLL (Frequency Search).  
• PC input.  
• The wire which is coloured blue must be connected  
to the plug terminal which is marked N or coloured  
black.  
• Plug&Play for Windows 98, ME, 2000, XP, Vista,  
Windows 7.  
• The wire which is coloured brown must be connected  
to the plug terminal which is marked L or coloured  
red.  
• Game Mode.  
• Picture off function.  
Ensure that neither the brown nor the blue wire is  
connected to the earth terminal in your three pin plug.  
• Ethernet (LAN) for Internet connectivity and service.  
• 802.11n built in WIFI Support  
Before replacing the plug cover make sure that:  
• DLNA (DMP, DMR)  
• If the new fitted plug contains a fuse, its value is the  
• HBBTV (This feature is not available for UK models)  
same as that removed from the cut-off plug.  
• Miracast.  
• The cord grip is clamped over the sheath of the  
mains lead, and not simply over the lead wires.  
The illustrations and the OSD in this operation manual  
are for explanation purposes and may vary slightly  
from the actual operations.  
IFYOU HAVEANYDOUBT, CONSULTAQUALIFIED  
ELECTRICIAN.  
English - 2 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Ventilation—The vents and other openings in the  
cabinet are designed for ventilation. Do not cover  
or block these vents and openings since insufficient  
ventilation can cause overheating and/or shorten  
the life of the product. Do not place the product on  
a bed, sofa, rug or other similar surface, since they  
can block ventilation openings. This product is not  
designed for built-in installation; do not place the  
product in an enclosed place such as a bookcase  
or rack, unless proper ventilation is provided or the  
manufacturer’s instructions are followed.  
Dear SHARP customer  
Thank you for your purchase of the SHARP LCD  
colour TV product. To ensure safety and many years  
of trouble-free operation of your product, please read  
Important safety precautions carefully before using  
this product.  
This device is intended to receive and display TV  
programs. The different connection options make  
an additional expansion of the reception and display  
sources possible (receiver, DVD player, DVD recorder,  
VCR, PC etc.). This device is only suitable for the  
operation in dry interiors. This appliance is intended  
solely for private domestic use and may not be used  
for industrial and commercial purposes. We exclude  
liability in principle, if the device is not used as  
intended, or unauthorized modifications have been  
made. To operate your LCD TV in extreme ambient  
conditions may cause the damage of the device.  
• Use this device in moderate climates.  
For ventilation, leave a free space of at least 10 cm  
all around the set. To prevent any fault and unsafe  
situations, please do not place any objects on top  
of the set.  
Important safety precautions  
• Use a soft damp cloth to gently wipe the panel when  
it is dirty. To protect the panel, do not use a chemical  
cloth to clean it. Chemicals may cause damage or  
cracks in the cabinet of the TV.  
• The LCD panel used in this product is made of glass.  
Therefore, it can break when the product is dropped  
or impact applied. If the LCD panel is broken, be  
careful not to be injured by broken glass.  
• Water and moisture—Do not use the product near  
water, such as bathtub, washbasin, kitchen sink,  
laundry tub, swimming pool and in a wet basement.  
• Heat sources—Keep the product  
away from heat sources such as  
radiators, heaters, stoves and other  
heat-generating products (including  
amplifiers).  
• Do not place vases or any other  
water-filled containers on this  
product. The water may spill onto  
the product causing fire or electric  
shock.  
• To prevent fire, never place any type  
of candle or naked flames on the top  
or near the TV set.  
• To prevent any fault and unsafe  
situations, please do not place any objects on top  
of the set.  
• To prevent fire or shock hazard, do not place theAC  
cord under the TV set or other heavy items.  
• If any solid object or liquid falls into the cabinet,  
unplug the TV and have it checked by qualified  
personnel before operating it any further.  
• Do not display a still picture for a long time, as this  
could cause an afterimage to remain.  
• Stand—Do not place the product  
on an unstable cart, stand, tripod  
or table. Doing so can cause the  
product to fall, resulting in serious  
personal injuries as well as damage  
to the product. Use only a cart,  
stand, tripod, bracket or table  
recommended by the manufacturer or sold with the  
product. When mounting the product on a wall, be  
sure to follow the manufacturer’s instructions. Use  
only the mounting hardware recommended by the  
manufacturer.  
• There is power consumption always if main plug  
is connected.  
•
Servicing—Do not attempt to service the product  
yourself. Removing covers can expose you to high  
voltage and other dangerous conditions. Request a  
qualified person to perform servicing.  
Precautions when transporting the TV  
When transporting the TV, never carry it by holding  
onto the speakers. Be sure to always carry the TV by  
two people holding it with two hands—one hand on  
each side of the TV.  
• When relocating the product placed on a cart, it  
must be moved with utmost care. Sudden stops,  
excessive force and uneven floor surface can cause  
the product to fall from the cart.  
English - 3 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• If the cabinet is very dirty, wipe with a soft cloth  
(cotton, flannel, etc.) soaked in neutral detergent  
diluted with water and thoroughly wrung out, and  
then wipe with a soft dry cloth.  
WARNING  
To prevent the spread of fire, keep  
candles or other open flames away  
from this product at all times.  
• Avoid using benzene, thinner, and other solvents,  
as these may deform the cabinet and cause the  
paint to peel off.  
Power Source  
• Do not apply insecticides or other volatile liquids.  
Also, do not allow the cabinet to remain in contact  
with rubber or vinyl products for a long period of  
time. Plasticizers inside the plastic may cause the  
cabinet to deform and cause the paint to peel off.  
The TV set should be operated only from a 220-240V  
AC, 50Hz outlet. Ensure that you select the correct  
voltage setting for your convenience.  
Power Cord  
Do not place the set, a piece of furniture, etc. on the  
power cord (mains lead) or pinch the cord.  
Caring for the front panel  
• Turn off the main power and unplug the AC cord  
from the wall outlet before handling.  
Handle the power cord by the plug. Do not unplug the  
appliance by pulling from the power cord and never  
touch the power cord with wet hands as this could  
cause a short circuit or electric shock. Never make a  
knot in the cord or tie it with other cords. The power  
cords should be placed in such a way that they are  
not likely to be stepped on. A damaged power cord  
can cause fire or give you an electric shock. When it  
is damaged and needs to be replaced, it should be  
done by qualified personnel.  
• Gently wipe the surface of the front panel with a  
soft cloth (cotton, flannel, etc.). To protect the front  
panel, do not use a dirty cloth, liquid cleaners, or a  
chemical cloth (wet/dry sheet type cloth, etc.). This  
may damage the surface of the front panel.  
• Wiping with a hard cloth or using strong force may  
scratch the surface of the front panel.  
• Use a soft damp cloth to gently wipe the front panel  
when it is really dirty (It may scratch the surface of  
the front panel when wiped strongly).  
Moisture and Water  
Do not use this device in a humid and damp place  
(avoid the bathroom, the sink in the kitchen, and near  
the washing machine). Do not expose this device to  
rain or water, as this may be dangerous and do not  
place objects filled with liquids, such as fl ower vases,  
on top. Avoid from dripping or splashing. If any solid  
object or liquid falls into the cabinet, unplug the TV  
and have it checked by qualifi ed personnel before  
operating it any further.  
• If the front panel is dusty, use an anti-static brush,  
which is commercially available, to clean it.  
Lightning  
In case of storm and lightning or when going on  
holiday, disconnect the power cord from the wall outlet.  
Replacement Parts  
When replacement parts are required, make sure that  
the service technician has used replacement parts,  
which are specified by the manufacturer or have the  
same specifications as the original one. Unauthorized  
substitutions may result in fire, electrical shock or  
other hazards.  
Cleaning  
Before cleaning, unplug the TV set from the wall  
outlet. Do not use liquid or aerosol cleaners. Use  
soft and dry cloth.  
Heat and Flames  
Servicing  
The set should not be placed near to open flames and  
sources of intense heat such as an electric heater.  
Ensure that no open fl ame sources, such as lighted  
candles, are placed on top of the TV. Batteries should  
not be exposed to excessive heat such as sunshine,  
fi re or the like.  
Please refer all servicing to qualified personnel. Do  
not remove the cover yourself as this may result in  
an electric shock.  
Waste Disposal  
• Packaging and packaging aids are recyclable and  
should principally be recycled. Packaging materials,  
such as a foil bag should be kept away from children  
Caring for the cabinet  
• Use a soft cloth (cotton, flannel, etc.) and gently wipe  
the surface of the cabinet.  
• Batteries, including those which are heavy metal  
free, should not be disposed of with household  
waste. Please dispose of used batteries in an  
environmentally friendly manner. Find out about the  
legal regulations which apply in your area.  
• Using a chemical cloth (wet/dry sheet type cloth,  
etc.) may deform the components of the main unit  
cabinet or cause cracking.  
• Wiping with a hard cloth or using strong force may  
scratch the surface of the cabinet.  
English - 4 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Do not try to recharge batteries, there is a danger  
of explosion. Replace batteries only with the same  
or equivalent type.  
• Batteries should not be exposed to excessive heat  
such as sunshine, fire or the like.  
This symbol on the product or on its  
packaging means that your electrical  
and electronic device should be disposed  
at the end of its service life separately  
from your household wastes. There are  
separate collection systems for recycling  
in the EU. For more information, please  
contact the local authority or the dealer  
where you purchased the product.  
The Standby Off/On button doesn´t separate this  
device completely from mains. Moreover the device  
consumes power in the standby operation. In order to  
separate the device completely from mains, the mains  
plug has to be pulled from the mains socket. Because  
of that the device should be set up in a way, that an  
unobstructed access to mains socket is guaranteed,  
so that in case of emergency the mains plug can be  
pulled immediately. To exclude the danger of fire, the  
power cord should principally be separated from the  
mains socket prior to a longer period of non-usage,  
Disconnecting the Device  
The mains plug is used to disconnect the TV set  
from the mains and therefore it must remain readily  
operable.  
Headphone Volume  
Excessive sound pressure from earphones and i.e. during vacations.  
headphones can cause hearing loss.  
Electrical device not in the hands of  
children  
Installation  
To prevent injury, this device must be securely  
attached to the wall in accordance with the installation  
instructions when mounted to the wall (if the option  
is available).  
Never let children use any electrical device  
unsupervised. Children cannot always recognise  
possible dangers. Batteries / accumulators can be  
life threatening when swallowed. Store batteries out  
of the reach of small children. In case of swallowing  
a battery medical aid has to be sought immediately.  
Also keep the packaging foils away from children as  
there is danger of suffocation.  
LCD Screen  
The LCD panel is a very high technology product with  
about a million thin fi lm transistors, giving you fine  
picture details. Occasionally, a few non-active pixels  
may appear on the screen as a fi xed blue, green or  
red point. Please note that this does not affect the  
performance of your product.  
Warning  
Do not leave your TV in standby or operating mode  
when you leave your house.  
Connection to a Television Distribution  
System (Cable TV etc.) from Tuner  
Device connected to the protective earthing of the  
building installation through the mains connection or  
through other apparatus with a connection to protective  
earthing-and to a television distribution system using  
coaxial cable, may in some circumstances create a  
fire hazard.  
Connection to a cable distribution system has  
therefore to be provided through a device providing  
electrical isolation below a certain frequency range  
(galvanic isolator, see EN 60728-11).  
Note:The HDMI connection between PC and TV may cause  
radio interference in which case it is recommended to use  
VGA(DSUB-15) connection.  
English - 5 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Environmental Information  
Package Contents  
This television is designed to consume less energy  
to help save the environment. To reduce energy  
consumption, you should take the following steps:  
TV  
You can use Power Save Mode setting, located  
in the Picture menu. If you set Power Save Mode  
as Eco, the TV will switch to energy-saving mode  
and luminance level of TV set will be decreased to  
optimum level. Note that some picture settings will be  
unavailable to be changed when the TV is in Power  
Save Mode.  
Batteries: 2 X AAA  
LCD TV  
When you press the right button on the remote while  
Power Save Mode is set to “Eco”, “Screen will be  
off in 15 seconds.” message will be displayed on  
the screen. If the Power Save Mode option is set to  
“Disabled” press the left button. Select PROCEED  
and press OK to continue. The screen will turn off  
immediately. If you do not press any buttons the  
screen will turn off after 15 seconds.  
Quick Guide  
1 X Video & Audio Connection  
Cable  
Remote Control  
Note: You should check the accessories after purchasing.  
Make sure that each accessory is included.  
As the manufacturer’s specification supports  
communication on cable lengths shall be smaller  
than 3m.  
If you disable Power Save Mode, the picture mode  
will be automatically set to Dynamic except the Mode  
is set to Game or Sports.  
TV Control button & Operation  
When the TV is not in use, please switch off or  
disconnect the TV from the mains plug. This will also  
reduce energy consumption.  
Disconnect power when going away for longer time.  
Itishighlyrecommendedtoactivate PowerSaveMode  
setting to reduce your annual power consumption.And  
also it is recommended to disconnect the TV from the  
mains plug to save energy more when you do not use.  
Please help us to save environment by following  
these steps.  
1. Up direction  
2. Down direction  
3. Volume / Info / Sources List selection and  
Standby-On switch  
The Control button allows you to control the Volume  
/ Programme / Source and Standby-On functions of  
the TV.  
, switch is used for turning the TV on or off.  
The position of the power switch may differ depending  
on the model.  
English - 6 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
• Do not install or place the remote control unit under  
direct sunlight. The heat may cause deformation  
of the unit.  
Connect Power  
IMPORTANT: The TV set is designed to operate on  
220-240V AC, 50 Hz socket. After unpacking, allow  
the TV set to reach the ambient room temperature  
before you connect the set to the mains. Plug the  
power cable to the mains socket outlet.  
• The remote control unit may not work properly if  
the remote control sensor of the TV is under direct  
sunlight or strong lighting. In such cases, change the  
angle of the lighting or the TV, or operate the remote  
control unit closer to the remote control sensor.  
Antenna/Cable/Satellite Connection  
Connect the aerial or cable TV plug to the AERIAL  
INPUT (ANT.) or satellite lead to the SATELLITE  
INPUT(LNB) located on the rear side of the TV.  
“Satellite is only available in 362/363 series”.  
Switching On/Off  
To Switch the TV On  
Connect the power cord to the mains socket. Switch  
the “  
” button on the TV to position “|” so the TV  
Rear side of the TV:  
will switch to standby mode. Then the standby LED  
lights up.  
To switch on the TV from standby mode either:  
• Press the “ ” button, P+ / P- or a numeric button  
on the remote control.  
SATELLITE  
AERIAL  
• Press the side function switch on the TV until the TV  
comes on from standby.  
The TV will then switch on.  
To Switch the TV to Standby  
CABLE  
To switch the TV to low power standby press the  
Note: Satellite support is depending on the model.  
“
” button on the remote control or press the side  
(only available in LC-32LE363EN / LC-32LE362EN  
/ LC-40LE363EN / LC-40LE362EN series)  
function switch on the TV until the TV switches into  
standby mode.  
Installing The Batteries Into The  
Remote  
To Switch the TV Off  
Switch the “  
” button on bottom of the TV to  
• Remove the back cover to reveal the battery  
compartment.  
position 2 as illustrated - “  
the mains, the LED will go out.  
”, to isolate the TV from  
• Insert two size AAA batteries. Note the correct  
polarity(+ or -). Do not mix old and new batteries.  
Replace only with same or equivalent type.  
• Place the cover back on.  
Angle of the remote control unit  
Use the remote control unit by pointing it towards the  
remote control sensor.  
Objects between the remote control unit and sensor  
may prevent proper operation.  
Cautions regarding the remote control unit  
• Do not expose the remote control unit to shock.  
In addition, do not expose the remote control unit  
to liquids, and do not place in an area with high  
humidity.  
English - 7 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing remote control - TV  
1. Standby / On  
2. Channel list  
3. Volume up / down  
4. Menu on/off  
5. OK / Confirm  
6. Return / Back  
7. Internet Portal  
8. My button / YouTube (*)  
9. Press this button to launch the Netflix application.  
(Netflix service is only available in certain countries)  
10. Coloured buttons (Red, Green, Yellow, Blue)  
11. Mono-Stereo Dual I-II / Current language  
12. Fast rewind (in media browser mode)  
TV  
13. Pause (in media browser mode) / Timeshift  
recording  
14. Programme recording  
15. Play (in media browser mode)  
16. Stop (in media browser mode)  
17. Fast forward (in media browser mode)  
18. Subtitle on-off / Subtitle (in media browser  
mode)  
19. Image size  
20. Teletext - Mix  
21. Media Browser  
22. Electronic programme guide  
23. Exit  
24. Navigation buttons  
25. Quick menu On-Off  
26. Info / Reveal (in TXT mode)  
27. Programme up / down  
28. Mute  
29. Previous programme  
30. Numeric buttons  
31. AV / Source  
Note: The Remote Control range is approximately 7m / 23ft.  
Using My button (*)  
This button’s main function is to run YouTube link.  
However, if you want to change this function, you can  
press MY BUTTON 1 for five seconds when on a  
desired source or channel, until the “MY BUTTON IS  
SET” message is displayed on the screen. This confirms  
that the selected MY BUTTON is now associated with  
the selected function. Note that if you perform first time  
installation, MY BUTTON 1 will return to its default  
function.  
English - 8 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Viewing the Connections  
Note: When connecting a device  
via the YPbPr or Side AV input,  
you must use connection  
cables to enable connection.  
For Side AV input you should  
use the supplied cable. See the  
illustrations on the left side. | You  
can use YPbPr to VGAcable (not  
supplied) to enable YPbPr signal  
via VGA input. | You cannot use  
VGA and YPbPr at the same  
time.| To enable PC/YPbPr  
audio, you will need to use the  
SIDE AV socket with a PC audio  
cable (not supplied) for audio  
connection, using the supplied  
Side AV connection cable’s  
RED and WHITE inputs.| If an  
external device is connected  
via the SCART socket, the TV  
will automatically switch to AV  
mode.| When receiving DTV  
channels (Mpeg4 H.264) or  
while in Media Browser mode,  
output will not be available via  
the scart socket. | When using  
the wall mounting kit (available  
from third party in the market),  
we recommend that you plug  
all your cables into the back  
of the TV before mounting on  
the wall. | Insert or remove  
the CI module only when the  
TV is SWITCHED OFF. You  
should refer to the module  
instruction manual for details of  
the settings. | Each USB input  
of your TV supports devices up  
to 500mA. Connecting devices  
that have current value above  
500mA may damage your TV.  
Connector  
Type  
Cables  
Device  
Scart  
Connection  
(back)  
VGA  
Connection  
(back)  
PC/YPbPr  
Audio  
Connection  
(side)  
Side Audio/Video  
Connection Cable  
(Supplied)  
PC Audio Cable  
(Not supplied)  
HDMI (1,2,3)  
Connection  
(back)  
SPDIF  
(Coaxial Out)  
Connection  
(back)  
Side AV  
(Audio/Video)  
Connection  
(side)  
Side AV  
Connection Cable  
(supplied)  
Headphone  
Connection  
(side)  
YPbPr Video  
Connection  
(back)  
PC to YPbPr  
Connection Cable  
| By connecting an HDMI cable  
to your TV, you have to use  
only a shielded HDMI cable to  
guarantee a sufficient immunity  
against parasitic frequency  
radiation.  
(Not supplied)  
USB  
Connection  
(side)  
CI  
If you want to  
connect a device to  
the TV, make sure  
C
A
M
Connection  
(side)  
m
o
d
u
l
e
that both the TV and the  
device are turned off before  
making any connection. After  
the connection is done, you  
can turn on the units and use  
them.  
LAN  
Ethernet (LAN)  
Connection  
(back)  
English - 9 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Using a Conditional Access Module  
Standby Notifications  
If the TV does not receive any input signal (e.g. from  
an aerial or HDMI source) for 5 minutes, the TV will go  
into standby. When you next switch-on, the following  
message will be displayed:  
IMPORTANT: Insert or remove the CI module only when  
the TV is SWITCHED OFF.  
In order to watch certain digital channels, a conditional  
access module (CAM) can be necessary. This module  
must be inserted in the CI slot of your TV.  
“TV switched to stand-by mode automatically  
because there was no signal for a long time.”  
1. Obtain the Conditional Access Module (CAM) and  
the viewing card by subscribing to a pay channel  
company, then insert those to the TV using the  
following procedure.  
Press OK to continue.  
If the TV has been left on and not been operated for  
a while, the TV will go into standby. When you next  
switch-on, the following message will be displayed:  
2. Insert the CAM and then the viewing card to the  
slot that is located in the terminal cover at the  
rear side of the TV.  
“TV switched to stand-by mode automatically  
because no operation was made for a long time.”  
Press OK to continue.  
3. The CAM should be correctly inserted, it is  
impossible to insert fully if reversed. The CAM  
or the TV terminal may be damaged if the  
CAM is forcefully inserted.  
When the Auto TV OFF timeout is reached, the  
following message will be displayed on the screen:  
“Shut Down?”  
4. Connect the TV to the mains supply, switch  
on and then wait for few moments until the  
card is activated.  
Select Yes to shut down the TV. Select No to cancel.  
The TV will switch off as well, if you do not make a  
selection on this screen.  
5. When no module is inserted, “No Common  
Interface module detected” message  
appears on the screen.  
You can refer to the module instruction manual for  
details of the settings.  
Note: It takes a few minutes to certify the licence key when  
you insert a CA card into the CI+ compatible CI module for  
the first time. This process may fail when there is no antenna  
input or you have never run “Auto installation”. If the old CAM  
is used, authentication may fail. In such cases, contact the  
contracted service provider.  
C
A
M
m
o
d
u
l
e
English - 10 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
These are the standard single LNB search  
requirements.  
First Time Installation  
When turned on for the first time, the language  
selection screen is displayed. Select the desired  
language and press OK.  
Unicable: If you have multiple receivers and a  
unicable system, select this antenna type. Press OK to  
continue. Configure settings by following instructions  
on the screen. Press OK to scan for services.  
On the next screen, set your preferences using the  
navigation buttons and when finished, press OK to  
continue.  
DiSEqC switch: If you have multiple satellite dishes  
and a DiSEqC switch, select this antenna type. After  
selecting DiSEqC switch, another menu screen will  
be displayed. You can set four DiSEqC options (if  
available). Press GREEN button to scan all satellites  
or press YELLOW button to scan only the highlighted  
satellite. To save and exit press OK button.  
You can activate Store Mode option at this point.  
This option is intended only for store use. It is  
recommended to select Home Mode for home use.  
If Store Mode is selected, a confirmation screen will  
be displayed. Select YES to proceed. This option  
will be available in Other Settings menu and can be  
turned off/on later.  
While the search continues a message will appear,  
asking whether you want to sort channels according  
to the LCN (*). Select Yes and press OK to confirm.  
Aerial Installation  
(*) LCN is the Logical Channel Number system that  
organizes available broadcasts in accordance with a  
recognizable channel sequence (if available).  
If you select Aerial option from the search type  
selection screen, the television will search for digital  
terrestrial TV broadcasts. You can press the MENU  
button any time to cancel the search. After all the  
available stations are stored, the Channel List will be  
displayed on the screen.  
Note: Do not turn off the TV while initializing first time  
installation.  
(*) Some options may not be available depending on  
the country selection.  
Press MENU button to quit channel list and watch TV.  
Cable Installation  
Media Playback via USB Input  
If you select Cable option and press OK button on  
the remote control a confirmation screen will be  
displayed. Select YES and press OK to proceed.  
To cancel operation, select NO and press OK. You  
can select frequency ranges from this screen. Enter  
the frequency range manually by using the numeric  
buttons. When finished, press OK button to start  
automatic search.  
You can connect a 2.5” and 3.5” inch (hdd with  
external power supply) external hard disk drives  
or USB memory stick to your TV by using the USB  
inputs of the TV.  
IMPORTANT! Back up your files before making any  
connections to the TV. The Manufacturer will not be  
responsible for any file damage or data loss.  
Certain types of USB devices (e.g. MP3 Players)  
or USB hard disk drives/memory sticks may not be  
compatible with this TV. The TV supports FAT32  
and NTFS disk formatting but recording will not be  
available with NTFS formatted disks.  
Note: Searching duration will change depending on  
the selected search step.  
Satellite Installation (depends on the model)  
If you select Satellite option from the search  
type selection screen, you can set a satellite and  
watch satellite channels. When you select Satellite  
installation, Antenna Type menu will be displayed.  
You can select Antenna type as Direct, Unicable  
or DiSEqC switch.  
While formatting a USB hard disk that has 1TB (Tera  
Byte) or more file capacity, you can experience  
problems with the formatting process.  
Quickly plugging and unplugging USB devices, is a  
very hazardous operation. This may cause physical  
damage to the USB player and the USB device itself.  
Do not pull out the USB module while playing a file.  
Direct: If you have a single receiver and a direct  
satellite dish, select this antenna type. After selecting  
Direct, another menu screen will be displayed. Select  
an available satellite and press OK to scan for services.  
If wanted, the default LNB frequency values for the  
selected satellite can be edited before starting the  
search. The frequency values can be entered in two  
ways:  
Media Browser Menu  
You can play photo, music, and video files stored on  
a USB storage device or on a media server. Connect  
a USB disk to one of the USB inputs located on the  
side of the TV. Or connect your media server to the  
same network with the TV.  
1. The high band value should be “0” and the low  
Press the “media browser button -  
” on the remote  
band value should be entered.  
or press the MENU button and select Media Browser  
tab by using Left/Right buttons and press OK. Main  
media browser screen will be displayed.  
2. The high and low band values should be the  
same, so this value can be used in search. But  
this value cannot be “0”.  
Select the media type to be listed and press OK.  
English - 11 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
If there is more than one media source available, a list highlight the CEC RC Passthrough and set as Off by  
of devices and servers will be displayed. Highlight the pressing Left or Right button. This feature can also  
device or server from the list and press OK.  
be enabled or disabled under the Settings/Other  
Settings menu.  
If you press the MENU button while in the Media Browser  
mode you can access Picture, Sound and Settings  
menu options. Pressing the MENU button again will  
The TV supports also ARC(Audio Return Channel)  
feature. This feature is an audio link meant to replace  
other cables between the TV and the audio system  
(A/V receiver or speaker system).  
exit from this screen.  
You can set your Media Browser preferences by using  
the settings menu.  
System Audio Control  
Allows an Audio Amplifier/Receiver to be used with  
the TV. The volume can be controlled using the  
remote control of the TV. To activate this feture set  
the Speakers option in the Settings>Other Settings  
menu as Amplifier. The TV speakers will be muted  
and the sound of the watched source will be provided  
from the connected sound system.  
Changing Image Size: Picture Formats  
Programmes can be watched in different picture  
formats, depending on the transmission received. You  
can change the aspect ratio (image size) of the TV  
for viewing the picture in different zoom modes. Press  
” button repeatedly to change the image size.  
You can shift the screen up or down by using “  
or “ ” buttons while in 14:9 Zoom, Cinema or  
“
”
Note: The audio device should support SystemAudio Control  
feature and CEC option should be set as Enabled.  
Subtitle.  
FollowMe TV  
Using the Channel List  
With your mobile device you can stream the current  
broadcast from your smart TV using the FollowMe  
TV feature. Install the appropriate Smart Center  
application to your mobile device. Start the application.  
The TV sorts all stored stations in the channel list. You  
can edit this channel list, set favourites or set active  
stations to be listed by using the Channel List menu  
options. Press MENU button to view main menu.  
Select Channel List item by using Left or Right  
button. Press OK to view menu contents. Select Edit  
Channel List to manage all stored channels. Use  
Up or Down and OK buttons to select Edit Channel  
List. Press Up or Down button to select the channel  
that will be processed. Press Left or Right button to  
select a function. Use P+/P- buttons to move page up  
or down. Press MENU button to exit.  
For further information on using this feature refer to  
the instructions of the application you use.  
Note: This application is not compatible with all mobile  
device.  
FollowMe TV to DMR  
This feature allows video streaming from your TV  
to another TV or mobile devices, using proper  
applications (e.g. UPnP - Universal Plug and Play -  
applications like BubbleUPnP).Activate FollowMe TV  
to DMR and timeshifting starts. Press the red button  
and device selection menu will be displayed. Choose  
your device and press OK.  
Quick Menu  
Quick Settings menu allows you to access some  
options quickly. Press Q.MENU button on the remote  
control to view quick menu. This menu content may  
differ depending on the model of your TV.  
Note: FollowMeTV and FollowMe TV to DMR features  
require a connected USB storage device with FAT32 format  
and enough space in it. Media Renderer option in the Other  
Settings menu should be set as Enabled. HD channels are  
not supported and both of the devices must be connected to  
the same network.  
CEC and CEC RC Passthrough  
This function allows to control the CEC-enabled  
devices, that are connected through HDMI ports by  
using the remote control of the TV.  
The CEC option in the Other Settings menu under  
Settings menu should be set as Enabled at first. Press  
the Source button and select the HDMI input of the  
connected CEC device from the Source List menu.  
When new CEC source device is connected, it will  
be listed in source menu with its own name instead  
of the connected HDMI ports name(DVD Player,  
Recorder 1 etc.).  
The TV remote is automatically able to perform the  
main functions after the connected HDMI source has  
been selected.  
To terminate this operation and control the TV via the  
remote again, press Q.Menu button on the remote,  
English - 12 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Features and Functions  
Picture Menu Contents  
You can change the picture mode to suit your preference or requirements. The Picture mode can  
be set to one of these options: Cinema, Game, Sports, Dynamic and Natural.  
Mode  
Contrast  
Brightness  
Sharpness  
Colour  
Sets the lightness and darkness values of the screen.  
Sets the brightness value for the screen.  
Sets the sharpness value for the objects displayed on the screen.  
Sets the colour value, adjusting the colors.  
To set the Power Save Mode as Eco, Picture Off and Disabled.  
Power Save Mode  
Backlight  
(When the Mode is Dynamic, Power Save mode is automatically set as disabled.)  
This setting controls the backlight level. The backlight function will be inactive if the Power Save Mode  
is set to Eco. The backlight cannot be activated in VGA, Media Browser mode or while the picture  
mode is set to Game.  
Noise  
If the broadcast signal is weak and the picture is noisy, use the Noise Reduction setting to  
Reduction  
reduce the amount of noise.  
Advanced Settings  
Dyanmic  
You can change the Dynamic Contrast ratio to desired value.  
Contrast  
Colour Temp  
Sets the desired colour tone.  
Sets the desired picture size from picture zoom menu.  
Picture Zoom  
Movie Sense  
Note: Auto option is only available in Scart mode with SCART PIN8 high voltage/low voltage switching.  
Press Use “Left” / “Right” to set Movie Sense Low, Med, High or Off. While Movie Sense is  
active, it will optimize the TV’s video settings for motional images to acquire a better quality  
and readability.  
When Movie Sense option is set to Low, Med or High, Movie Sense demo option will be  
available. If one of these options is selected and if you press OK button, then the demo  
mode starts. While demo mode is active, the screen will be divided into two sections, one  
displaying the movie sense activity, the other displaying the normal settings for TV screen.  
Films are recorded at a different number of frames per second to normal television  
programmes. Turn this feature on when you are watching films to see the fast motion  
scenes clearly.  
Film Mode  
Skin Tone  
Colour Shift  
RGB Gain  
Skin tone can be changed between -5 and 5.  
Adjust the desired colour tone.  
You can configure the colour temperature values using the RGB Gain feature.  
HDMI True  
Black  
While watching from a HDMI source, this feature will be visible in the Picture Settings  
menu. You can use this feature to enhance blackness in the picture.  
Reset  
Resets the picture settings to factory default settings.(Except Game Mode)  
Autoposition  
(in PC mode)  
Automatically optimizes the display. Press OK to optimize.  
H Position  
(in PC mode)  
This item shifts the image horizontally to the right hand side or left hand side of the screen.  
This item shifts the image vertically towards the top or bottom of the screen.  
V Position  
(in PC mode)  
Dot Clock  
(in PC mode)  
Dot Clock adjustments correct the interference that appear as vertical banding in dot intensive  
presentations like spreadsheets or paragraphs or text in smaller fonts.  
Depending on the resolution and scan frequency that you input to the TV set, you may see  
a hazy or noisy picture on the screen. In such a case you can use this item to get a clear  
picture by trial and error method.  
Phase  
(in PC mode)  
While in VGA (PC) mode, some items in Picture menu will be unavailable. Instead, VGA mode settings will be added  
to the Picture Settings while in PC mode.  
English - 13 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Features and Functions  
Sound Menu Contents  
Volume  
Adjusts the volume level.  
Selects the equalizer mode. Custom settings can be made only when in User  
mode.  
Equalizer  
Balance  
This setting is used for emphasizing left or right speaker balance.  
Sets headphone volume.  
Headphone  
Sound Mode  
You can select a sound mode (if the selected channel supports).  
AVL (Automatic  
Volume Limiting)  
This function sets the sound to obtain fixed output level between programmes.  
When you connect an external amplifier to your TV using the headphone jack, you can  
select this option as Lineout. If you have connected headphones to the TV, set this  
option as Headphone.  
Headphone/Lineout  
Dynamic Bass  
Surround Sound  
Digital Out  
Enables or disables the Dynamic Bass.  
Surround sound mode can be changed as On or Off.  
Sets digital out audio type.  
Settings Menu Contents  
Conditional Access  
Controls conditional access modules when available.  
Configures language settings (may change depending on the country selected)  
Preferred and current settings will be available. Current settings can be changed  
only if the broadcaster supports.  
Language  
Enter correct password to change parental settings. You can easily adjust menu  
lock, maturity lock(depending on the country selected) and child lock in this menu.  
You can also set a new PIN number.  
Parental  
Timers  
When Child Lock option is set as “ON”, TV can only be controlled by the remote control handset.  
In this case the control panel button will not work  
Note: Default PIN can be set to 0000 or 1234. If you have defined the PIN(is requested depending on  
the country selection) during the First Time Installation use the PIN that you have defined.  
Sets sleep timer to turn off the TV after a certain time. Sets timers for selected  
programmes.  
Recording Configuration Displays the recording configuration menu.  
Date/Time  
Sets date and time.  
Sources  
Enables or disables selected source options.  
Displays satellite settings. (Satellite support depends on the model)  
Displays network settings.  
Satellite Settings  
Network Settings  
You can view your ESN(*) number and deactivate Netflix.  
Netflix (optional)  
(*) ESN number is an unique ID number for Netflix, created especially to identify your TV.  
Other Settings: Displays other setting options of the TV set  
Menu Timeout  
Changes timeout duration for menu screens.  
Scan Encrypted  
Channels  
When this setting is on, the search process will locate the encrypted channels as well.  
HbbTV  
You can enable or disable this feature by setting it as On or Off.  
Activates or deactivates the blue background system when the signal is weak or absent.  
To ensure that your TV always has the most up to date firmware.  
Blue Background  
Software Upgrade  
Application Version  
Displays current software version.  
English - 14 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu Features and Functions  
This option is used to select which subtitle mode will be on the screen (DVB  
subtitle / TXT subtitle) if both is available. Default value is DVB subtitle.  
Available only in Norway.  
Subtitle Mode  
Hard of Hearing  
Enables any special feature sent from the broadcaster.  
Audio description refers to an additional narration track for blind and visually  
impaired viewers of visual media, including television and movies. You can use  
this feature, only if the broadcaster supports that additional narration track.  
Note:Audio description sound feature cannot be available in recording or time shifting mode.  
Audio Description  
Auto TV Off  
You can set the timeout value of the auto off feature. When the timeout value is reached  
and the TV has not been operated for a selected time, the TV will go into standby mode.  
If the Standby Search is set to On, when the TV is in standby mode, available  
broadcasts will be searched. If the TV locates any new or missing broadcasts, a  
menu screen will be displayed, asking you whether or not to execute these changes.  
The Channel list will be updated and changed after this process.  
Standby Search  
(Optional)  
If you are displaying the TV in a store, you can activate this mode. Whilst Store  
Mode is enabled, some items in the TV menu may not be available.  
Store Mode  
Media Renderer feature allows you to share files stored on your smartphone or tablet  
pc. If you have a DLNA compatible smartphone or tablet pc and the appropriate  
Media Renderer (DMR) software is installed, you can share/play photos on your TV. See instructions of your  
sharing software for more information. Media renderer mode will not be available  
with internet portal feature.  
Power Up Mode  
This setting confrigures the power up mode preference.  
Biss is a satellite signal scrambling system that is used for some broadcasts. If you  
need to enter BISS key on a broadcast, you can use Biss Key setting located in the  
Other Settings menu. Highlight Biss Key and press OK to enter keys on the desired  
broadcast. (This menu item appears only when the TV has a satellite support)  
Biss Key  
Virtual Remote  
CEC  
Enable or disable the virtual remote feature.  
With this setting you can enable and disable CEC functionality completely. Press  
Left or Right button to enable or disable the feature.  
To hear the TV audio from the connected compatible audio device set as Amplifier.  
You can use the remote control of the TV to control the volume of the audio device.  
Speakers  
Shows the status of the FollowMe TV feature. It will appear as On, if the feature is in use.  
FollowMeTV  
FollowMeTV to DMR  
Enable or disable this feature.  
Install and Retune Menu Contents  
Displays automatic tuning options. Digital Aerial: Searches and stores aerial  
DVB stations. Digital Cable: Searches and stores cable DVB stations. Analogue:  
Searches and stores analogue stations. DigitalAerial &Analogue: Searches and  
stores aerial DVB and analogue stations. Digital Cable &Analogue: Searches and  
stores cable DVB and analogue stations. Satellite: Searches and stores satellite  
channels. (Satellite support depends on the model)  
Automatic Channel  
Scan (Retune)  
(If available)  
Manual Channel Scan  
This feature can be used for direct broadcast entry.  
Network Channel Scan Searches for the linked channels in the broadcast system.  
You can use this setting for fine tuning analogue channels. This feature is not  
available if no analogue channels are stored.  
Analogue Fine Tune  
First Time Installation  
Clear Service List  
Deletes all stored channels and settings, resets TV to factory settings.  
(*) This setting is visible only when the Country option is set to Denmark, Sweden,  
Norway or Finland. Use this setting to clear channels stored.  
English - 15 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Electronic Programme Guide (EPG)  
Teletext  
Some, but not all channels send information about  
“
” Teletext / Mix:Activates video text mode when  
the current and next programmes. Press the pressed once (if available in your broadcast). Press  
again to place the teletext screen over the programme  
“
” button to view the EPG menu.  
(mix). Pressing again will quit the teletext mode.  
Up/Down/Left/Right: Navigate EPG.  
“BACK” Index: Selects the teletext index page.  
OK: Displays programme options.  
“İ” Reveal: Shows hidden information (e.g. solutions  
of games).  
INFO (İ): Displays, in detail information on programme  
selected.  
“OK” Hold: Holds a text page when convenient. Press  
again to resume.  
GREEN: Displays the programmes of the next day.  
YELLOW: Press the Yellow button to see events in  
a wider time interval.  
“
”/“ ” Subcode Pages: Selects subcode pages if  
available when the teletext is activated.  
BLUE: displays filtering options.  
P+ / P- and numbers (0-9): Press to select a page.  
(RECORD): the TV will start to record the selected  
progamme. You can press again to stop the recording.  
Note: Most TV stations use code 100 for their index pages.  
Your TV supports both FASTEXT and TOP text  
systems. When these systems are available, the  
pages are divided into groups or topics. When  
FASTEXT system is available, sections in a teletext  
page will become colour-coded and can be selected  
by pressing the coloured buttons. Press a coloured  
button that corresponds to with your needs. The  
coloured writings will appear, showing you which  
coloured buttons to use when TOP text transmission  
is present. Pressing “ ” or “ ” commands will request  
the next or previous page respectively.  
IMPORTANT: To record a programme, you should first  
connect a USB disk to your TV while the TV is switched off.  
You should then switch on the TV to enable recording feature.  
Otherwise, recording feature will not be available.  
Note: Switching to a different broadcast or source is not  
available during the recording.  
Programme Options  
In EPG menu, press the OK button to enter the Event  
Options menu.  
Select Channel  
Digital Teletext (for UK only)  
In EPG menu, using this option, you can switch to the  
selected channel.  
• Press the “ ” button. The digital teletext information  
appears. Operate it with the coloured buttons, cursor  
buttons and OK button.  
Record / Delete Record Timer  
After you have selected a programme in EPG menu,  
press the OK button and and Options screen will be  
displayed. Select “Record” option and press the OK  
button. After this operation, a recording becomes set  
to the selected programme.  
The operation method may differ depending on the  
contents of the digital teletext. Follow the instructions  
displayed on digital teletext screen.  
When the “ ” button is pressed again, the TV returns  
to television broadcasting.  
To cancel an already set recording, highlight that  
programme and press the OK button and select the  
option “Delete Rec. Timer”. The recording will be  
cancelled.  
Recording a Programme  
IMPORTANT: When using a new USB hard disk drive, it is  
recommended that you first format the disk using your TV’s  
“Format Disk” option.  
Set Timer / Delete Timer  
Your TV supports recording of digital broadcasts. To do  
this a USB stroge device should be connected to the  
TV. The TV should be switched off while connecting  
the storage device. Then switch on the TV to enable  
recording feature.  
After you have selected a programme in EPG menu,  
press the OK button and and Options screen will  
be displayed. Select “Set Timer on Event” option  
and press OK button. You can set a timer for future  
programmes. To cancel an already set timer, highlight  
that programme and press the OK button. Then select  
“Delete Timer” option. The timer will be cancelled.  
The connected USB device should have at least 2  
GB capacity and should have USB 2.0 compatibility.  
Otherwise an error message will be displayed.  
Note: It is not possible to record or set timer for two or more  
individual events at the same time interval.  
To record long duration programmes such as movies,  
it is recommended to use USB Hard disk drives  
(HDD’s).  
If the writing speed of the connected USB disk is not  
sufficient, recording may fail and timeshifting feature  
may not be available.  
English - 16 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The files of the recorded programmes will not be  
available to be played on a computer. You can play  
the recordings only via your TV.  
Instant Recording  
Press  
event instantly while watching a programme. You can  
press (RECORD) button on the remote control  
(RECORD) button to start recording an  
Lip Sync delay may occur during the timeshifting.  
The TV can record programmes up to ten hours.  
Recorded programmes are split into 4GB partitions.  
again to record the next event on the EPG. In this  
case, OSD will display the programmed events for  
recording. Press  
(STOP) button to cancel instant  
Recordings of HD programmes can occupy bigger  
size on the USB disk depending on the broadcast’s  
resolution. For this reason it is recommended to use  
USB hard disk drives for recording HD programmes.  
recording. Switching to a different broadcast or source;  
and viewing Media Browser are not available during  
the recording.  
Watching Recorded Programmes  
Do not plug out the USB/HDD during the recording.  
This may harm the connected USB/HDD.  
Press MENU button. Highlight Media Browser  
and press OK. Select Recordings item and press  
OK. Recordings screen will be displayed. Select a  
recorded item from the list (if previously recorded) and  
press OK to view Play Options.  
Multipartiton support is available. Maximum two  
different partitions are supported. If the disk have more  
than two partitions, crash may occur. First partition  
of the usb disk is used for PVR ready features. It also  
must be formatted as primary partition to be used for  
PVR ready features.  
Available playback options  
Play from start: Plays the recording from the  
beginning.  
Some stream packets may not be recorded because  
of signal problems, so sometimes video may freezes  
during playback.  
Resume: Recommences the recordings.  
Play from offset: Specifies a playing point.  
Record, Play, Pause, Display (for PlayListDialog) keys  
could not be used when teletext is ON. If a recording  
starts from timer when teletext is ON, teletext is  
automatically turned off. Also teletext usage is  
disabled when there is ongoing recording or playback.  
Press (STOP) button to stop a playback and return  
to Recordings.  
Recording Configuration  
Select Recording Configuration item in the Settings  
menu to configure recording settings.  
Note: Recorded programmes are saved into the connected  
USB disk. If desired, you can store/copy recordings on a  
computer; however, these files will not be available to be  
played on a computer. You can play the recordings only  
via your TV.  
Format Disk: You can use Format Disk feature for  
formatting the connected USB disk.  
IMPORTANT: Note that ALL the data stored on the  
USB disk will be lost and then the disk format will  
be converted to FAT32 if you activate this feature. If  
your USB disk malfunctions, you can try formatting  
the USB disk. In most cases formatting the USB disk  
will restore normal operation; however, ALL the data  
stored on the USB disk will be lost in such a case.  
Caution:  
• Do not unplug the AC cord during USB-recording timer  
setting or USB-recording.  
• When the AC cord is unplugged:  
• The USB-recording timer setting is cancelled.  
Timeshift Recording  
Connectivity Functions  
Press (PAUSE) button while watching a broadcast  
for switching to timeshifting mode. In timeshifting  
mode, the programme is paused and simultaneously  
recorded to the connected USB disk. Press (PLAY)  
button again to watch the paused programme from  
the stopped moment. You will see the timeshift gap  
between the real and the timeshifted programme in  
the info bar.  
Connecting TV to a Home Network  
Connectivity feature allows the TV to connect to the  
home network wired or wirelessly. You can use this  
networking system to connect to the Internet Portal  
or to access photo, video and audio files that are  
stored on a media server connected to the network  
and play/display them on the TV.  
Press the (STOP) button to stop timeshift recording  
and return to the live broadcast.  
Wired connection  
Connect the TV to the modem/router via a LAN  
cable (not supplied). Select Network Type as  
Timeshift cannot be used while in radio mode.  
You cannot use the timeshift fast reverse feature Wired Device in Network Settings menu and  
before advancing the playback with the fast forward press OK to connect.  
option.  
Press Yellow button on the remote to enter the advanced  
network settings menu. You can view or change the  
settings such as IP Address using this menu.  
English - 17 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
networks will be displayed. Select your network from  
the list and press OK.  
Broadband ISP  
connection  
If the selected network is protected with a password,  
key in the correct code. You can also use virtual  
keyboard to enter the password.  
Wait until the IP the address is shown on the screen.  
This means that the connection is now established.  
LAN (ethernet)  
cable  
To disconnect from a network, you should highlight  
Network Type and press OK.  
Information On Menu Items  
LAN input on the rear  
side of the TV  
Network Type: Network type can be selected as  
Wired or Wireless device, in accordance with the active  
connection to the TV set.  
Wireless connection  
To connect the TV to the home network wirelessly  
just select Network Type as Wireless Device in  
Network Settings menu and press OK button.  
The TV will search for available networks. Select  
the desired network and press OK. The TV has a  
built-in WLAN system and has no need for additional  
devices to connect to a wireless network.  
Configuration Status: This section displays the  
status of the connection.  
IPAddress: If an active connection is available, the IP  
address will be displayed on this section. If you want  
to configure IP address preferences, press GREEN  
button and switch to the advanced mode.  
Broadband  
ISP  
connection  
Connecting to your mobile device via WiFi  
If your mobile device has WiFi feature, you can  
connect it to your TV via a router, in order to access  
the content in your device. For this, your mobile device  
must have an appropriate sharing software.  
Connect your mobile device to the router/modem and  
then activate the sharing software on your mobile  
device. Then, select files that you want to share with  
your TV.  
If the connection is established correctly, you will be  
able to access the shared files from your mobile device  
via the Media Browser of your TV.  
Enter the Media Browser menu and the playback  
device selection OSD will be displayed. Select your  
mobile device and press the OK button to continue.  
TV (Built-In WLAN system)  
About Using Connectivity Feature  
PC/HDD/Media Player or any other devices that are  
DLNA 1.5 compatible should be used with wired  
connection for higher playback quality.  
If available, you can download a virtual remote  
controller application from the server of your mobile  
device application provider. You can control the TV via  
your wireless handheld device using this application.  
To do this enable the Virtual Remote feature from the  
Settings/Other Settings menu by pressing Left or  
Right button. Connect the TV and the mobile device  
to the same network and start the application.  
Install Nero Media Home software to your PC to use  
it as a media server.  
While using the wireless connection type, consider  
that the TV cannot connect to the networks with  
hidden SSID.  
Note: This feature may not be supported on all mobile  
devices.  
Configuring Network Settings  
Your TV’s network settings include wired and wireless  
connection options. If you are connecting the TV via  
ethernet input, select Network Type as Wired Device.  
Select Wireless Device option if you are going to  
connect the TV to your network wirelessly.  
Using MIRACAST  
When you connect a device such as a Miracast  
compatible smartphone or tablet to this TV, you can  
enjoy video and audio from the device on the TV’s  
large screen and speakers.  
After selecting Network Type press OK to connect.  
1. Switch the TV source to “ Screen Mirroring”.  
You can press YELLOW button to scan available  
2. Enable the Miracast function on the Miracast  
networks for wireless connection. Afterwards, a list of  
supported device and connect to the TV.  
English - 18 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
(The TV changes according to the behavior of the  
device).  
Internet Portal  
Portal feature adds your TV a feature that allows you  
to connect to a server on the Internet and view the  
content provided by this server over your Internet  
connection. Portal feature allows you to view the  
music, video, clip or web content with defined  
shortcuts. Net TV provides variety of services for each  
country. Whether you can view the provided content  
without interruption depends on the connection speed  
provided by your internet service provider.  
Note: This feature can be used only if the mobile device  
supports Miracast. Scanning and connecting processes differ  
according to the programme you use. Android based mobile  
devices should have the software version V4.1.2 and above.  
Using DLNA Network Service  
The DLNA standard allows you to view and play  
photos, music and videos stored in a DLNAcompliant  
media server connected to your home network.  
Install Nero Media Home software (for PC’s or  
laptops) or appropriate sharing software (for other  
devices)  
Press “ ” button on the remote to open internet portal  
page. You will see icons of the available applications  
and services on the portal screen. Use the navigaiton  
buttons on your remote to select the desired one.  
You may view the desired content by pressing OK  
after selecting. To perform searches on the web and  
within the available applications on the portal highlight  
search and press OK. Enter a keyword in the search  
dialog box. Highlight Start Search and press OK  
button on the remote. Press BACK/RETURN button  
to return back to the previous screen or EXIT to quit  
internet portal mode  
Nero MediaHome software download link (for PC only):  
http://www.nero.com/mediahome-tv  
The DLNA function cannot be used if the server  
programme is not installed onto your PC. Prepare your  
PC with the Nero Media Home programme. Install the  
propriate application onto your mobile device.  
Enable Media Renderer feature  
Press MENU button. Select Settings and press OK.  
Highlight Media Renderer and set as Enabled.  
Note: Possible application dependent problems may be  
caused by the content service provider.  
Connect to a Wired or Wireless Network  
See the previous chapters for detailed information.  
NOTE:  
Play Shared Files via Media Browser  
• Because Net TV is an online system, it can be modified over  
time to better serve its purpose.  
Select Media Browser from the main menu and press  
• Some Net TV services may be added, changed or  
discontinued after some time.  
OK. The Media browser will then be displayed.  
DLNA support is only available in Folder mode. To  
enable folder mode, select to the Settings tab in the  
main media browser menu and press OK. Highlight  
View Style and set as to Folder. Press the BACK  
button to go to upper menu. Select the desired media  
type and press OK.  
• Some open internet websites may not be tailored for a TV  
screen and may not be displayed correctly.  
• You cannot download and save files nor install plug-ins.  
DISCLAIMERS  
• SHARP bears no responsibility regarding the content and  
quality of the content provided by the content serve provider.  
If sharing configurations are set properly, the device  
selection OSD will be displayed after selecting the  
desired media type. Select media server or network  
that you want to connect and press OK.  
Netflix  
Netflix is a provider of on-demand internet streaming  
media. Press the NETFLIX button on the remote to  
launch the application.  
Subtitle files do not work if you watch videos from your  
network through DLNA.  
You can connect only one television with DLNA to  
the same network. If a problem occurs with the DLNA  
network, please switch your television off at the wall  
socket and back on again. Trick mode and jump are  
not supported with the DLNA function.  
There may be some PC’s which may not be able to  
utilize the DLNA function due to administrator and  
security settings (such as business PC’s).  
English - 19 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
below. The user then can switch to other applications  
by using the links provided. The applications should  
provide a way to terminate themselves, usually Exit  
button is used for this.  
HBBTV System  
HbbTV (Hybrid Broadcast Broadband TV) is a  
standard that seamlessly combines TV services  
delivered via broadcast with services delivered via  
broadband and also enables access to Internet only  
services for consumers using connected TVs and set-  
top boxes. Services delivered through HbbTV include  
traditional broadcast TV channels, catch-up services,  
video-on-demand, EPG, interactive advertising,  
personalisation, voting, games, social networking and  
other multimedia applications.  
HbbTV applications are available on channels where  
they are signalled by the broadcaster (currently  
various channels on Astra broadcast HbbTV  
applications). The broadcaster marks one application  
as “autostart” and this one is started by the platform  
automatically. The applications are generally launched  
with a small red button icon to notify the user that  
there is an HbbTV application on that channel (The  
shape and the location of the red button depends on  
the application). The red button is displayed for some  
and then may disappear. The user then should press  
the red button to open the application page. After the  
page is displayed the user can go back to the initial  
red button icon state by pressing the red button again.  
The user can toggle between the red button icon mode  
and full UI mode of the application via pressing red  
button. It should be noted that the red button switching  
capability is provided by the application and some  
application may behave differently.  
Figure a: Start bar application  
Figure b: EPG application, broadcast video is shown  
on the left bottom, can be terminated by pressing 0.  
HbbTv applications use keys on the remote control to  
interact with the user. When an HbbTv applications is  
launched, the control of some keys are owned by the  
application. For example, numeric channel selection  
may not work on a teletext application where the  
numbers indicate teletext pages.  
HbbTv requires AV streaming capability for the  
platform. There are numerous applications providing  
VOD (video on demand) and catch-up TV services.  
The user can use play, pause, stop, forward, and  
rewind keys on the remote control to interact with  
the AV content  
Figure x: Service with red button application (taken  
from HbbTV specification)  
If you switch to another channel while an HbbTV  
application is active (either in red button icon mode  
or full UI mode), the following scenarios can occur.  
Note: You can enable or disable this feature from the Other  
Settings menu in Settings menu. This feature is not availlable  
for UK models.  
• The application can continue running.  
• The application can be terminated.  
• The application can be terminated and another  
autostart red button application can be launched.  
HbbTv allows the applications to be retrieved both  
from broadband or broadcast. The broadcaster may  
enable both ways or one of them. If the platfrom does  
not have an operational broadband connection, the  
platform can still launch applications transmitted on  
broadcast.  
The autostart red button applications generally provide  
links to other applications.An example of this is shown  
English - 20 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connectivity Troubleshooting  
Software Upgrade  
Your TV is capable of finding and updating automatically  
via the Aerial/Cable/Satellite(depends on the model)  
signal or over the Internet.  
Wireless Network Not Available  
Ensure that the firewalls of your network allows the  
TV wireless connection. If the wireless network does  
not function properly, try using the wired network in Software upgrade search via user interface  
your home. Refer to the Wired Connection section  
for more information on the process.  
Simply navigate on your main menu. Choose Settings  
and select Other Settings menu. In Other Settings  
If the Net TV does not function, check the modem menunavigateontotheSoftwareforUpgradeitemand  
(router) first. If the router does not have a problem, press OK button to check for a new software upgrade.  
check the internet connection of your modem.  
Note : Internet connection is needed. If an internet  
connection is not available, try to upgrade via  
broadcast. If a new upgrade is found, it starts to  
download the upgrade. Press OK to continue with  
the reboot operation.  
Try searching for wireless networks again, using the  
Network Settings menu screen.  
• The transmission speed differs depending on the  
distance and number of obstructions between the  
transmission products, the confi guration of these  
products, the radio wave conditions, the line traffic,  
and the products that you use. The transmission  
may also be cut off or get disconnected depending  
on the radio wave conditions DECT phones, or any  
other WiFi 11b appliances. The standard values of  
the transmission speed are the theoretical maximum  
values for the wireless standards. They are not the  
actual speeds of data transmission.  
3 AM search and upgrade mode  
While the TV is connected to an aerial signal. If  
Automatic scanning in the Upgrade Options menu  
is enabled, the TV wakes up at 03:00 and searches  
broadcast channels for new software upgrades. If  
new software is found and downloaded successfully,  
the next time the TV powers up , it will have the new  
software version.  
Note: Do not unplug the power cord while led is blinking  
during the reboot process. If the TV fails to come on after  
the upgrade unplug the TV for 2 minutes and plug in again.  
• Wireless LAN feature supports 802.11 a,b,g & n  
type modems. It is highly recommended that you  
should use IEEE 802.11n communication protocol  
in order to avoid any possible problems while  
watching videos.  
Troubleshooting & Tips  
Image persistence - ghosting  
Please note that ghosting may occur while displaying  
a persistent image (still or paused image). LCD TVs’  
image persistence may disappear after a short time.  
Try turning off the TV for a while. To avoid this, do not  
leave the screen in still picture mode for extended  
periods.  
• You must change your modem’s SSID when there  
are any other modems around with the same SSID.  
You can encounter connection problems otherwise.  
Use wired connection instead if you experience  
problems with wireless connection.  
Connection is Slow  
No power  
See the instruction book of your wireless modem to get  
information on the internal service area, connection  
speed, signal quality and other settings. You need to  
have a high speed connection for your modem.  
If your TV has no power, please check the power cord  
plug is connect to the mains power socket.  
The TV cannot be operated  
External influences such as lightning, static electricity,  
etc., may cause improper operation. In this case,  
operate the TV after first turning off the power, or  
unplugging the AC cord and re-plugging it in after  
one or two minutes.  
Distruption during playback or slow reactions  
You could try the following in such a case:  
Keep at least three meters distance from microwave  
ovens, mobile telephones, bluetooth devices or any  
other Wi-Fi compatible devices. Try changing the  
active channel on the WLAN router.  
Poor picture  
1. Have you selected the correct TV system?  
2. Is your TV or house aerial located too close to a  
non-earthed audio equipment or neon lights, etc.?  
3. Mountains or high buildings can cause double  
pictures or ghost images. Sometimes you can improve  
the picture quality by changing the direction of the  
aerial. Is the picture or teletext unrecognisable?  
English - 21 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
4. Check if you have entered the correct frequency. if  
you have done manual tuning.  
Recording Unavailable  
To record a programme, you should first connect  
a USB disk to your TV while the TV is switched  
off. You should then switch on the TV to enable  
recording feature. Otherwise, recording feature will  
not be available. If you cannot perform recording, try  
switching off the TV and then re-inserting the USB  
5. Please retune the channels.  
6. The picture quality may degrade when two devices  
are connected to the TV at the same time. In such a  
case, disconnect one of the devices.  
No picture  
device while the TV is switched off.  
1. No Picture means that your TV is not receiving a  
transmission. Have you selected the correct button on  
the remote control? Try once more. Also make sure  
the correct input source has been selected.  
USB Is too Slow  
If “USB disk writing speed too slow to record”  
message is displayed on the screen while starting a  
recording, try restarting the recording. If you still get  
the same error, it is possible that your USB disk does  
not meet the speed requirements. Try connecting  
another USB disk.  
2. Is the aerial connected properly?  
3. Are the plugs connected tightly to the aerial socket?  
4. Is the aerial cable damaged?  
5. Are suitable plugs used to connect the aerial?  
6. If you are in doubt, consult your dealer.  
Strange, light, dark colour or colour misalignment  
Internet Connection Not Available / DLNA Mode  
Not Operating  
Check if the ethernet cable is connected properly.  
Check if the Network settings are correct.  
• Adjust the picture settings. Press the MENU button  
and select Picture. Press OK to open the Picture  
Settings menu.  
If the MAC address (a unique identifier number) of  
your PC or modem has been permanently registered,  
it is possible that your TV might not connect to  
the internet. In such a case, the MAC address is  
authenticated each time when you connect to the  
internet. This is a precaution against unauthorized  
access. Since your TV has its own MAC address,  
your internet service provider cannot validate the MAC  
address of your TV. For this reason, your TV cannot  
connect to the internet. Contact your internet service  
provider and request information on how to connect  
a different device, such as your TV, to the internet.  
• Is the room too bright? The picture may look dark in  
a room that is too bright.  
No sound  
1. Has the TV been set to mute? To cancel mute,  
press the “ ” button, or increase the volume level.  
2. Sound is coming from only one speaker. Is the  
balance set to one extreme? See Sound Menu  
section.  
Remote control - does not operate  
It is also possible that the connection may not be  
available due to a firewall problem. If you think  
this causes your problem, contact your internet  
service provider. A firewall might be the reason of a  
connectivity and discovery problem while using the TV  
in DLNA mode or while browsing via DLNA.  
Your TV no longer responds to the remote control. The  
batteries may be exhausted, if so you can still use the  
control buttons on the TV. (* Is only possible if they  
are not blocked by parental control.)  
Power is suddenly turned off  
• The TV’s internal temperature has increased.  
Remove any objects blocking the vent or clean.  
Invalid Domain  
Ensure that you have already logged on to your PC  
with an authorized username/password and also  
ensure that your domain is active, prior to sharing  
any files in your DLNA server program on your PC. If  
the domain is invalid, this might cause problems while  
browsing files in DLNA mode.  
• Is a sleep timer set? Press the MENU button and  
select Settings. Select Timers in the sub-menu  
and press OK. Press Left or Right button to set the  
Sleep Timer as Off.  
• Is Auto TV OFF function is activated? Press the  
MENU button and select Settings. Than select Other  
Settings and press OK. In the sub-menu highlight  
Auto TV OFF and press Left or Right button to set  
as Off.  
The TV sometimes makes a cracking sound.  
This is not a malfunction. This happens when the  
cabinet slightly expands or contracts according to the  
changes in the ambient temperature. This does not  
affect the TV’s performance.  
Input sources - can not be selected  
1. If you cannot select an input source, it is possible  
that no device is connected.  
Miracast image/audio cannot be output to  
the TV.  
2. Check the AV cables and connections if you have  
tried to connect a device.  
Check if the pairing is made properly.  
English - 22 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
PC Typical Display Modes  
AV and HDMI Signal Compatibility  
(Input Signal Types)  
The following table is an illustration of some of the  
typical video display modes. Your TV may not support  
all resolutions.  
Source  
Supported Signals  
PAL 50/60  
NTSC 60  
Available  
O
O
O
O
O
O
Index Resolution Frequency  
EXT1  
1
640x350  
640x400  
640x400  
640x480  
640x480  
640x480  
640x480  
640x480  
800x600  
800x600  
800x600  
800x600  
800x600  
800x600  
832x624  
1024x768  
1024x768  
1024x768  
1024x768  
1024x768  
1024x768  
1152x864  
1152x864  
1152x864  
1152x864  
1152x870  
1280x768  
1360x768  
1280x768  
1280x768  
1280x960  
1280x960  
1280x960  
85Hz  
70Hz  
85Hz  
60Hz  
66Hz  
72Hz  
75Hz  
85Hz  
56Hz  
60Hz  
70Hz  
72Hz  
75Hz  
85Hz  
75Hz  
60Hz  
66Hz  
70Hz  
72Hz  
75Hz  
85Hz  
60Hz  
70Hz  
75Hz  
85Hz  
75Hz  
60Hz  
60Hz  
75Hz  
85Hz  
60Hz  
75Hz  
85Hz  
60Hz  
75Hz  
85Hz  
60Hz  
75Hz  
85Hz  
60Hz  
75Hz  
60Hz  
60Hz  
60Hz  
60Hz  
(1st scart:)  
RGB 50/60  
SECAM  
2
3
4
PAL 50/60  
NTSC 60  
5
Side AV  
YPbPr  
6
SECAM  
7
480I, 480P  
576I, 576P  
720P  
60Hz  
50Hz  
O
O
O
O
O
O
O
O
O
8
9
10  
11  
12  
13  
14  
15  
16  
17  
18  
19  
20  
21  
22  
23  
24  
25  
26  
27  
28  
29  
30  
31  
32  
33  
50Hz,60Hz  
50Hz,60Hz  
60Hz  
1080I  
480I  
480P  
60Hz  
576I, 576P  
720P  
50Hz  
50Hz,60Hz  
50Hz,60Hz  
HDMI  
1080I  
24Hz,  
25Hz,  
30Hz,  
50Hz,  
60Hz  
1080P  
O
(X: Not Available, O: Available)  
In some cases a signal on the LED TV may not  
be displayed properly. The problem may be an  
inconsistency with standards from the source  
equipment (DVD, Set-top box, etc. ). If you do  
experience such a problem please contact your dealer  
and also the manufacturer of the source equipment.  
34 1280x1024  
35 1280x1024  
36 1280x1024  
37 1400x1050  
38 1400x1050  
39 1400x1050  
40  
41  
1440x900  
1440x900  
42 1600x1200  
43 1680x1050  
44 1920x1080  
45 1920x1200  
English - 23 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Supported File Formats for USB Media Browser  
Media  
Extension Format  
Notes  
Video  
.dat, .mpg, Mpeg1-2  
.mpeg  
1080P@30fps, 50Mbit/sec  
.ts, .trp,  
.tp, .m2ts  
MPEG2 , H.264,  
VC1, AVS, MVC  
H.264:1080Px2@25fps, 1080P@50fps MVC:1080P@ 24fps Other: 1080P@30fps -  
50Mbit/sec  
.vob  
MPEG2  
1080P@30fps 50Mbit/sec  
.mkv  
MPEG1-2-4,  
H.264  
H.264:1080Px2@25fps, 1080P@ 50fps, 1080P@30fps, 50Mbit/sec  
.mp4  
.mov  
MPEG4, XviD,  
H.264  
H.264:1080Px2@25fps, 1080P@ 50fps, 1080P@30fps, 50Mbit/sec  
H.264:1080Px2@25fps, 1080P@ 50fps, 1080P@30fps, 50Mbit/sec  
.avi  
MPEG2-4, Xvid,  
H.264  
.fla, .flv  
H.264, Sorenson H.264:1080Px2@25fps, 1080P@50fps, 1080P@30fps, 40Mbit/sec  
H.263  
.3gp  
MPEG4, H.264  
1920x1080@30P 20Mbit/sec  
1080P@30fps, 50Mbit/sec  
.asf, .wmv VC1  
Audio  
.mp3  
MPEG1/2 Layer  
1/2/3 (MP3)  
Layer1: 32Kbps ~ 448Kbps (Bit rate) / 16KHz ~ 48KHz (Sampling rate)  
Layer2: 8Kbps ~ 384Kbps (Bit rate) / 16KHz ~ 48KHz (Sampling rate)  
Layer3: 8Kbps ~ 320Kbps (Bit rate) / 16KHz ~ 48KHz (Sampling rate)  
.wav  
LPCM  
.WMA/  
ASF  
WMA, WMA Pro  
WMA: 128bps ~ 320Kbps (Bit rate) / 8KHz ~ 48Khz (Sampling rate)  
WMA Pro: < 768kbps (Bit rate) / ~ 96KHz (Sampling rate)  
.m4a/ .aac AAC, HEAAC  
Free Format (Bit rate) / 8KHz ~ 48KHz (Sampling rate)  
.pcm  
PCM  
AC3  
8Kbps ~ 320Kbps (Bit rate) / 16KHz ~ 48KHz (Sampling rate)  
32Kbps ~ 640Kbps (Bit rate) / 32KHz, 44.1KHz, 48KHz (Sampling rate)  
32Kbps ~ 6 Mbps (Bit rate) / 32KHz, 44.1KHz, 48KHz (Sampling rate)  
64Kbps ~ 1.5Mbps (Bit rate) / 8KHz ~ 48Khz (Sampling rate)  
384Kbps (Bit rate) / 8KHz ~ 48Khz (Sampling rate)  
(works  
only with  
video  
EAC3  
LPCM  
files)  
IMA-ADPCM/  
MS-ADPCM  
G711 A/mu-law  
Baseline  
64~128Kbps (Bit rate) / 8KHz (Sampling rate)  
Resolution(WxH): 15360x8640, 4147200 bytes  
Resolution(WxH): 1024x768, 6291456 bytes  
Resolution(WxH): 9600x6400, 3840000 bytes  
Resolution(WxH): 1200x800, 3840000 bytes  
Resolution(WxH): 9600x6400, 3840000 bytes  
Sub1, Sub2, Sub3  
Picture  
.jpeg  
.jpg  
Progressive  
non-interlace  
interlace  
.png  
.bmp  
.sub  
.srt  
Subtitle  
-
-
English - 24 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Supported File Formats for by MKV  
External  
Yes  
Embedded subtitle  
MicroDVD  
MPEG-4 Timed Text  
MPSub  
Ogg Kate  
Ogg Writ  
SAMI  
Yes  
Yes  
SubRip  
(Advanced) SubStation  
Alpha  
Yes  
Yes  
Yes  
SubViewer  
(only support 1.0 and 2.0)  
Yes  
Universal Subtitle Format  
VobSub  
XSUB  
Yes  
Yes  
Supported DVI Resolutions  
When connecting devices to your TV’s connectors by using DVI converter cable(DVI to HDMI cable - not  
supplied), you can refer to the following resolution information.  
56Hz  
60Hz  
66Hz  
70Hz  
72Hz  
75Hz  
640x400  
640x480  
800x600  
832x624  
1024x768  
1152x864  
þ
þ
þ
þ
þ
þ
þ
þ
þ
þ
þ
þ
þ
þ
þ
þ
þ
þ
þ
þ
þ
1152x870  
1280x768  
1360x768  
1280x960  
þ
þ
þ
þ
þ
þ
þ
þ
þ
þ
þ
þ
þ
þ
1280x1024  
1400x1050  
1440x900  
1600x1200  
1680x1050  
1920x1080  
1920x1200  
English - 25 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Wireless LAN Specifications  
Specifications  
Frequency Range  
TV BROADCASTING  
PAL B/G I/I’ D/K  
SECAM L/L’ D/K  
USA: 2.400 ~ 2.483GHz, 5.15 ~ 5.35GHz, 5.47 ~  
5.725GHz, 5.725 ~ 5.85GHz  
DIGITAL RECEPTION  
Europe: 2.400 ~ 2.483GHz, 5.15 ~ 5.35GHz, 5.47 ~  
5.725GHz  
FULLY INTEGRATED DIGITAL TERRESTRIAL-  
CABLE TV(DVB-T-C)  
Japan: 2.400 ~ 2.497GHz, 5.15 ~ 5.35GHz, 5.47 ~ 5.725GHz  
China: 2.400 ~ 2.483GHz, 5.725 ~5.85GHz  
Standard  
(DVB-T2 COMPLIANCE AND DVB-S/S2 SUPPORT  
IS DEPENDING ON THE MODEL)  
• HD DVB-T/C/S2(MPEG4) :  
LC-40LE362EN / LC-32LE362EN  
HD DVB-T2/C/S2(MPEG4) :  
LC-40LE363EN / LC-32LE363EN  
HD DVB-T/CABLE(MPEG4) :  
LC-40LE360EN / LC-32LE360EN  
HD DVB-T2/CABLE(MPEG4) :  
LC-40LE361EN / LC-32LE361EN  
HD DVB-T2/CABLE(MPEG4):  
LC-40LE361K / LC-32LE361K  
IEEE 802.11.a/b/g/n  
Host Interface  
USB 2.0  
Security  
WEP 64/128, WPA, WPA2, TKIP, AES, WAPI  
Note:  
A wireless LAN connection and performance cannot  
be guaranteed for all residential enviroments in the  
following cases, the wireless LAN signal may be poor  
or drop, or the connection speed may become slower.  
RECEIVING CHANNELS  
VHF (BAND I/III)  
• When used in buildings made with concrete,  
reinforced steel, or metal  
UHF (BAND U)  
HYPERBAND  
• When placed near objects that obstruct the signal  
NUMBER OF PRESET CHANNELS  
1.000  
• When used with other wireless devices that emit  
the same frecuency  
10.000 (if satellite is supported)  
CHANNEL INDICATOR  
On Screen Display  
RF AERIAL INPUT  
75 Ohm (unbalanced)  
OPERATING VOLTAGE  
220-240V AC, 50 Hz.  
AUDIO  
• When used in the vicinity of microwave ovens and  
other devices that emit a magnetic field, electrostatic  
charge, or electromagnetic interference  
All other company or product names are trademarks or  
registered trademarks of their respective companies.  
Licence Notifications  
Manufactured under license from Dolby Laboratories.  
Dolby and the double-D symbol are trademarks of  
Dolby Laboratories.  
German + Nicam Stereo  
All other company or product names are trademarks or  
registered trademarks of their respective companies.  
OPERATION TEMPERATURE AND OPERATION  
HUMIDITY  
Netflix and the Netflix logo are the registered  
trademarks of Netflix, Inc.  
0ºC up to 40ºC, 85% humidity max  
PANEL 16:9  
The Wi-Fi CERTIFIED Logo is a certification mark of  
the Wi-Fi Alliance.  
32”  
40”  
The Wi-Fi Protected Setup Mark is a mark of the  
Wi-Fi Alliance.  
AUDIO OUTPUT  
POWER (WRMS  
)
2 x 6 W  
2 x 8 W  
.
(10% THD)  
Wi-Fi CERTIFIED Miracast™ and Miracast™ are  
trademarks of Wi-Fi Alliance.  
“DLNA®, the DLNA Logo and DLNA CERTIFIED® are  
trademarks, service marks, or certification marks of  
the Digital Living Network Alliance.”  
POWER  
65 W (max) 75 W (max)  
8,8 Kg 12,6 Kg  
CONSUMPTION (W)  
WEIGHT (Kg)  
“YouTube and the YouTube logo are trademarks of  
Google Inc.”  
English - 26 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
The “HD TV 1080P” Logo is a trademark of  
DIGITALEUROPE (only available in LC-40LE362EN /  
LC-40LE363EN / LC-40LE360EN / LC-40LE361EN / LC-  
directors , officers, employees, agents, contractors  
and affiliates shall not be liable to you or any third  
party with respect to such failures or maintenance  
outages, regardless of cause or whether or not it  
could have been avoided.  
40LE361K series).  
The terms HDMI and High-Definition Multimedia  
Interface, and the HDMI Logo are trademarks or  
registered trademarks of HDMI Licensing LLC in the  
United States and other countries.  
• ALL THIRD PARTY CONTENT OR SERVICES  
ACCESSIBLE VIA THIS DEVICE IS PROVIDED  
TO YOU ON AN “AS-IS” AND “AS AVAILABLE”  
BASIS AND SHARP AND ITS AFFILIATES MAKE  
NO WARRANTY OR REPRESENTATION OF  
ANY KIND TO YOU, EITHER EXPRESS OR  
IMPLIED, INCLUDING, WITHOUT LIMITATION,  
ANY WARRANTIES OF MERCHANTABILITY,  
NON-INFRINGEMENT, FITNESS FOR A  
PARTICULAR PURPOSE OR ANY WARRANTIES  
OF SUITABILITY, AVAILABILITY, ACCURACY,  
COMPLETENESS, SECURITY, TITLE,  
USEFULNESS, LACK OF NEGLIGENCE OR  
ERROR-FREEORUNINTERRUPTEDOPERATION  
OR USE OF THE CONTENT OR SERVICES  
PROVIDED TO YOU OR THAT THE CONTENT OR  
SERVICES WILL MEET YOUR REQUIREMENTS  
OR EXPECTATIONS.  
The DVB logo is the registered trademark of the Digital  
Video Broadcasting—DVB—project.  
EC Declaration of Conformity  
Hereby, SHARP Electronics (Europe) GmbH  
declares that the TV set is in compliance with  
the essential requirements and other relevant  
provisions of Directive 1999/5/EC. The  
declaration of conformity may be consulted at:  
http://www.sharp.eu/documents-of-conformity  
Note:  
Usage of this LCD TV is permitted in Europe.  
This LCD TV is designed for indoor use only.  
• SHARP IS NOT AN AGENT OF AND ASSUMES  
NO RESPONSIBILITY FOR THE ACTS OR  
OMISSIONS OF THIRD PARTY CONTENT OR  
SERVICE PROVIDERS, NOR ANY ASPECT OF  
THE CONTENT OR SERVICE RELATED TO SUCH  
THIRD PARTY PROVIDERS.  
Disclaimers for services using the  
Internet  
DISCLAIMERS  
This SHARP device facilitates the access to content  
and services provided by third parties.  
• IN NO EVENT WILL SHARP AND/OR ITS  
AFFILIATES BE LIABLE TO YOU OR ANY THIRD  
PARTY FOR ANY DIRECT, INDIRECT, SPECIAL,  
INCIDENTAL, PUNITIVE, CONSEQUENTIAL OR  
OTHER DAMAGES, WHETHER THE THEORY  
OF LIABILITY IS BASED ON CONTRACT, TORT,  
NEGLIGENCE, BREACH OF WARRANTY, STRICT  
LIABILITY OR OTHERWISE AND WHETHER OR  
NOT SHARP AND/OR ITS AFFILIATES HAVE  
BEEN ADVISED OF THE POSSIBILITY OF SUCH  
DAMAGES.  
The content and services accessible via this device  
belong to and may be proprietary to third parties.  
Therefore, any use of such third party content and  
services must be in accordance with any authorization  
or terms of use provided by such content or service  
provider. SHARP shall not be liable to you or any third  
party for your failure to abide by such authorization or  
terms of use. Unless otherwise specifically authorized  
by the applicable content or service provider, all third  
party content and services provided are for personal  
and non-commercial use; you may not modify, copy,  
distribute, transmit, display, perform, reproduce,  
upload, publish, license, create derivative works from,  
transfer or sell in any manner or medium any content  
or services available via this device.  
• SHARP is not responsible, nor liable, for customer  
service-related issues related to the third party  
content or services. Any questions, comments or  
service-related inquiries relating to the third party  
content or service should be made directly to the  
applicable content or service provider.  
• You may not be able to access content or services  
from the device for a variety of reasons which may  
be unrelated to the device itself, including, but not  
limited to, power failure, other Internet connection, or  
failure to configure your device properly. SHARP, its  
English - 27 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Nero MediaHome Installation  
To install Nero MediaHome, please proceed as  
follows:  
Note: To use DLNA function, this software should be installed  
to your PC.  
1. Enter the link below completely in the adress-bar  
of your web browser.  
http://www.nero.com/mediahome-tv  
2. Click the Download button on the opening page.  
The installation file will be downloaded onto your  
PC.  
3. After the download is completed, double click on  
the installation file to start the installation. The  
installation wizard will guide you through the  
installation process.  
4. The prerequisites screen will be displayed first.  
The installation wizard checks the availability  
of required third-party software on your PC. If  
applications are missing they are listed and must  
be installed before continuing installation.  
5. Click the Install button. The integrated serial will  
be displayed. Please do not change the displayed  
serial.  
6. Click the Next button. The License Conditions  
(EULA) screen will be displayed. Please read  
the license agreement carefully and select the  
appropriate check box if you agree to the terms of  
the agreement. Installation is not possible without  
this agreement.  
7. Click the Next button. On the next screen you can  
set your installation preferences.  
8. Click the Install button. The installation begins  
and finishes automatically. A progress bar will  
indicate the state of the installation process.  
9. Click the Finish button. The installation is  
completed. You will be directed to the web site of  
the nero software.  
10. A shortcut is now placed on your desktop.  
Congratulations! You successfully installed Nero  
MediaHome on your PC.  
Run Nero MediaHome by double clicking on the shortcut  
icon.  
English - 28 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
End of life disposal  
Pb  
English - 29 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Dimensional Drawings  
32281 (LC-32LE36x Series)  
40281 (LC-40LE36x Series)  
Note: The unit of the measurements is mm.  
English - 30 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installing the Stand  
IMPORTANT  
Please read the following information carefully before attaching the stand to your new Sharp Television.  
Installing the Stand  
• Before fitting the stand, ensure that the TV is unplugged from its power source.  
• Place the Sharp Television (1) on a soft, stable and flat surface, facing down.  
• Place the Stand (3) on the stand mounting pattern on the rear side of the TV.  
• Ensure the Stand (3) is placed correctly and that you can see the screw holes on the back of the Sharp  
Television.  
• Place the Stand Cover (2) on the Stand (3).  
• Ensure the Stand Cover (3) is placed correctly and that you can see the screw holes on the back of the  
Sharp Television.  
• DO NOT insert the screws before placing the plastic molding.  
• Insert the screws provided and tighten them gently until the stand is properly fitted.  
32281 (LC-32LE36x Series)  
40281 (LC-40LE36x Series)  
English - 31 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Uninstalling the Stand  
IMPORTANT  
Please read the following information carefully before detaching the stand of your Sharp Television.  
Uninstalling the Stand  
• Before detaching the stand, ensure that the TV is unplugged from its power source.  
• Place the Sharp Television on a soft, stable and flat surface, facing down.  
• Unscrew gently the four screws that attach the foot assembly and remove the screws when they are  
completely unscrewed.  
• Remove the stand and plastic moulding gently from the panel.  
32281 (LC-32LE36x Series)  
40281 (LC-40LE36x Series)  
English - 32 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Screw Dimensions Wall Mounting  
Screw length = A+B  
Screw  
Cabinet  
Wall mount angle  
TO THE PRODUCT  
MODEL  
VESA  
MIN. / MAX. SCREW LENGTH  
(A LENGTH)  
LC-32LE362EN  
LC-32LE363EN  
LC-32LE360EN  
LC-32LE361EN  
LC-32LE361K  
200 x 100 (W X H)  
M4 x 6 / M4 x 10  
LC-40LE362EN  
LC-40LE363EN  
LC-40LE360EN  
LC-40LE361EN  
LC-40LE361K  
200 x 200 (W X H )  
M6 x 8 / M6 x 12  
English - 33 -  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sennheiser TV Antenna AD 3700 User Manual
Sharp Computer Monitor PN E802 User Manual
Sharp Stereo System MD M1H User Manual
Silvercrest Clock Radio SRD 250 A1 User Manual
Sony Camera Accessories MSH M128 User Manual
Sony Computer Monitor CPD 100GS User Manual
Sony Pet Fence XL 2200 User Manual
Stamina Products Exercise Bike 15 0135 User Manual
Stanton DJ Equipment SA5 User Manual
Sunrise Medical Mobility Aid 931150 User Manual