Sharp Flat Panel Television 52LE640U User Manual

LC-80LE633U

LC-70LE640U LC-70C6400U

LC-60LE640U LC-60C6400U

LC-52LE640U LC-52C6400U

LIQUID CRYSTAL TELEVISION

TÉLÉVISEUR ACL

TELEVISOR CON PANTALLA

DE CRISTAL LÍQUIDO

OPERATION MANUAL

MODE D'EMPLOI

MANUAL DE OPERACIÓN

IMPORTANT : Please read this operation manual before starting operating the equipment.

IMPORTANT : Veuillez lire ce mode d'emploi avant de commencer à utiliser l'appareil.

IMPORTANTE : Lea este manual de operación antes de comenzar a operar el equipo.

Download from Www.Somanuals.com. All Manuals Search And Download.

LC-80LE633U

LC-70LE640U LC-70C6400U

LC-60LE640U LC-60C6400U

LC-52LE640U LC-52C6400U

LIQUID CRYSTAL TELEVISION

ENGLISH

OPERATION MANUAL

IMPORTANT:

Model No.:

Serial No.:

To aid reporting in case of loss or theft, please record the

TV's model and serial numbers in the space provided. The

numbers are located at the rear and right side of the TV.

IMPORTANT INFORMATION

TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO

NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE.

WARNING:

The lightning ﬂash with arrow-head

symbol, within an equilateral triangle,

is intended to alert the user to the

presence of uninsulated “dangerous

voltage” within the product's

enclosure that may be of sufﬁcient

magnitude to constitute a risk of

electric shock to persons.

CAUTION

RISK OF ELECTRIC SHOCK

DO NOT OPEN

CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,

DO NOT REMOVE COVER (OR BACK).

NO USER-SERVICEABLE PARTS INSIDE.

REFER SERVICING TO QUALIFIED SERVICE

PERSONNEL.

The exclamation point within a

triangle is intended to alert the user

to the presence of important

operating and maintenance

(servicing) instructions in the

literature accompanying the product.

CAUTION: TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF PLUG TO WIDE

SLOT, FULLY INSERT.

WARNING: FCC Regulations state that any unauthorized changes or modiﬁcations to this equipment not expressly

approved by the manufacturer could void the user's authority to operate this equipment.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT INFORMATION

CAUTION:

This product satisﬁes FCC regulations when shielded cables and connectors are used to connect the unit to other

equipment. To prevent electromagnetic interference with electric appliances such as radios and televisions, use shielded

cables and connectors for connections.

DECLARATION OF CONFORMITY:

SHARP LIQUID CRYSTAL TELEVISION, MODEL LC-80LE633U/LC-70LE640U/LC-60LE640U/

LC-52LE640U/LC-70C6400U/LC-60C6400U/LC-52C6400U

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference

received, including interference that may cause undesired operation.

RESPONSIBLE PARTY:

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07495-1163

TEL: 1-800-BE-SHARP

For Business Customers: URL http://www.sharpusa.com

INFORMATION:

This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC

Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the

instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not

occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be

determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the

following measures:

Reorient or relocate the receiving antenna.

Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

Consult the dealer or an experienced radio/TV technician for help.

FCC Compliance Statement

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation.

Wireless Radio

For product available in the USA/Canada market, only channel 1–11 can be operated. Selection of other channels is not possible.

This device is going to be operated in 5.15–5.25GHz frequency range, it is restricted in indoor environment only.

Important: Any changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

FCC Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Industry Canada Statement

This Class B digital apparatus complies with Canadian ICES-003.

Cet appareil numérique de la classe B est conforme à la norme NMB-003 du Canada.

Wireless Radio

For product available in the USA/Canada market, only channel 1–11 can be operated. Selection of other channels is not possible.

The device could automatically discontinue transmission in case of absence of information to transmit, or operational failure.

Note that this is not intended to prohibit transmission of control or signaling information or the use of repetitive codes where

required by the technology.

Important: Any changes or modiﬁcations not expressly approved by the party responsible for compliance could void the user’s

authority to operate the equipment.

IC Radiation Exposure Statement: This equipment complies with IC RSS-102 radiation exposure limits set forth for an

uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator

& your body.

“Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820 of the National

Electrical Code that provides guidelines for proper grounding and, in particular, speciﬁes that the cable ground shall be connected to the

grounding system of the building, as close to the point of cable entry as practical.”

This product qualiﬁes for ENERGY STAR when "Home" is selected for "TV Location".

Setting "TV Location" to "Home" allows the TV to achieve an energy-saving status for household use.

Download from Www.Somanuals.com. All Manuals Search And Download.

DEAR SHARP CUSTOMER

Thank you for your purchase of the Sharp Liquid Crystal Television. To ensure safety and many years

of trouble-free operation of your product, please read the Important Safety Instructions carefully before

using this product.

IMPORTANT SAFETY INSTRUCTIONS

Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage

if improperly handled. This product has been engineered and manufactured with the highest priority on safety.

However, improper use can result in electric shock and/or ﬁre. In order to prevent potential danger, please

observe the following instructions when installing, operating and cleaning the product. To ensure your safety

and prolong the service life of your Liquid Crystal Television, please read the following precautions carefully

before using the product.

1) Read these instructions.

2) Keep these instructions.

3) Heed all warnings.

4) Follow all instructions.

5) Do not use this apparatus near water.

6) Clean only with dry cloth.

7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.

8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including

ampliﬁers) that produce heat.

9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades

with one wider than the other. A grounding type plug has two blades and a third grounding prong. The

wide blade or the third prong are provided for your safety. If the provided plug does not ﬁt into your outlet,

consult an electrician for replacement of the obsolete outlet.

10) Protect the power cord from being walked on or pinched particularly at plugs, convenience receptacles,

and the point where they exit from the apparatus.

11) Only use attachments/accessories speciﬁed by the manufacturer.

12) Use only with the cart, stand, tripod, bracket, or table speciﬁed by the manufacturer, or sold

with the apparatus. When a cart is used, use caution when moving the cart/apparatus

combination to avoid injury from tip-over.

13) Unplug this apparatus during lightning storms or when unused for long periods of time.

14) Refer all servicing to qualiﬁed service personnel. Servicing is required when the apparatus has been

damaged in any way, such as power-supply cord or plug is damaged, liquid has been spilled or objects

have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate

normally, or has been dropped.

Additional Safety Information

15) Power Sources—This product should be operated only from the type of power source indicated on the

marking label. If you are not sure of the type of power supply to your home, consult your product dealer or

local power company. For products intended to operate from battery power, or other sources, refer to the

operating instructions.

16) Overloading—Do not overload wall outlets, extension cords, or integral convenience receptacles as this

can result in a risk of ﬁre or electric shock.

17) Object and Liquid Entry—Never push objects of any kind into this product through openings as they may

touch dangerous voltage points or short-out parts that could result in a ﬁre or electric shock. Never spill

liquid of any kind on the product.

18) Damage Requiring Service—Unplug this product from the wall outlet and refer servicing to qualiﬁed

service personnel under the following conditions:

a) When the AC cord or plug is damaged,

b) If liquid has been spilled, or objects have fallen into the product,

c) If the product has been exposed to rain or water,

d) If the product does not operate normally by following the operating instructions.

Adjust only those controls that are covered by the operating instructions as an improper adjustment

of other controls may result in damage and will often require extensive work by a qualiﬁed technician

to restore the product to its normal operation,

e) If the product has been dropped or damaged in any way, and

f) When the product exhibits a distinct change in performance - this indicates a need for service.

19) Replacement Parts—When replacement parts are required, be sure the service technician has used

replacement parts speciﬁed by the manufacturer or have the same characteristics as the original part.

Unauthorized substitutions may result in ﬁre, electric shock, or other hazards.

20) Safety Check—Upon completion of any service or repairs to this product, ask the service technician to

perform safety checks to determine that the product is in proper operating condition.

21) Wall or ceiling mounting—When mounting the product on a wall or ceiling, be sure to install the product

according to the method recommended by the manufacturer.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE, ANSI/NFPA 70

• Outdoor Antenna Grounding — If an outside antenna is

connected to the television equipment, be sure the antenna

system is grounded so as to provide some protection against

voltage surges and built-up static charges.

ANTENNA

LEAD IN WIRE

Article 810 of the National Electrical Code, ANSI/NFPA 70,

provides information with regard to proper grounding of the

mast and supporting structure, grounding of the lead-in wire

to an antenna discharge unit, size of grounding conductors,

location of antenna-discharge unit, connection to grounding

electrodes, and requirements for the grounding electrode.

GROUND

CLAMP

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

ELECTRIC

SERVICE

EQUIPMENT

GROUNDING

CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250)

NEC — NATIONAL ELECTRICAL CODE

• Water and Moisture — Do not use this product near water - for example, near a bath tub, wash bowl, kitchen sink, or

laundry tub; in a wet basement; or near a swimming pool; and the like.

• Stand — Do not place the product on an unstable cart, stand, tripod or table. Placing the product on an unstable base

can cause the product to fall, resulting in serious personal injuries as well as damage to the product. Use only a cart,

stand, tripod, bracket or table recommended by the manufacturer or sold with the product. When mounting the product

on a wall, be sure to follow the manufacturer's instructions. Use only the mounting hardware recommended by the

manufacturer.

• Selecting the location — Select a place with no direct sunlight and good ventilation.

• Ventilation — The vents and other openings in the cabinet are designed for ventilation. Do not cover or block these vents

and openings since insufﬁcient ventilation can cause overheating and/or shorten the life of the product. Do not place

the product on a bed, sofa, rug or other similar surface, since they can block ventilation openings. This product is not

designed for built-in installation; do not place the product in an enclosed place such as a bookcase or rack, unless proper

ventilation is provided or the manufacturer's instructions are followed.

• The front panel used in this product is made of glass. Therefore, it can break when the product is dropped or applied with

impact. Be careful not to be injured by broken glass pieces in case the panel breaks.

• Heat — The product should be situated away from heat sources such as radiators, heat registers, stoves, or other

products (including ampliﬁers) that produce heat.

• The Liquid Crystal panel is a very high technology product with 2,073,600 pixels, giving you ﬁne picture details.

Occasionally, a few non-active pixels may appear on the screen as a ﬁxed point of blue, green or red. Please note that

this does not affect the performance of your product.

• Lightning — For added protection for this television equipment during a lightning storm, or when it is left unattended and

unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent damage to

the equipment due to lightning and power-line surges.

• Power Lines — An outside antenna system should not be located in the vicinity of overhead power lines or other electric

light or power circuits, or where it can fall into such power lines or circuits. When installing an outside antenna system,

extreme care should be taken to keep from touching such power lines or circuits as contact with them might be fatal.

• To prevent ﬁre, never place any type of candle or ﬂames on the top or near the TV set.

• To prevent ﬁre or shock hazard, do not place the AC cord under the TV set or other heavy items.

• Do not display a still picture for a long time, as this could cause an afterimage to remain.

• To prevent ﬁre or shock hazard, do not expose this product to dripping or splashing.

No objects ﬁlled with liquids, such as vases, should be placed on the product.

• Do not insert foreign objects into the product. Inserting objects in the air vents or other openings may

result in ﬁre or electric shock. Exercise special caution when using the product around children.

Precautions when transporting the TV

• When transporting the TV, never carry it by holding or otherwise putting pressure onto the display. Be sure to always

carry the TV by two people holding it with two hands — one hand on each side of the TV.

Caring for the cabinet

• Use a soft cloth (cotton, ﬂannel, etc.) and gently wipe the surface of the cabinet.

• Using a chemical cloth (wet/dry sheet type cloth, etc.) may deform the components of the main unit cabinet or cause

cracking.

• Wiping with a hard cloth or using strong force may scratch the surface of the cabinet.

• If the cabinet is very dirty, wipe with a soft cloth (cotton, ﬂannel, etc.) soaked in neutral detergent diluted with water and

thoroughly wrung out, and then wipe with a soft dry cloth.

• Avoid using benzene, thinner, and other solvents, as these may deform the cabinet and cause the paint to peel off.

• Do not apply insecticides or other volatile liquids.

Also, do not allow the cabinet to remain in contact with rubber or vinyl products for a long period of time. Plasticizers

inside the plastic may cause the cabinet to deform and cause the paint to peel off.

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFETY INSTRUCTIONS

Caring for the front panel

• Turn off the main power and unplug the AC cord from the wall outlet before handling.

• Gently wipe the surface of the front panel with a soft cloth (cotton, ﬂannel, etc.).

To protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth (wet/dry

sheet type cloth, etc.). This may damage the surface of the front panel.

• Wiping with a hard cloth or using strong force may scratch the surface of the front panel.

• Use a soft damp cloth to gently wipe the front panel when it is really dirty.

(It may scratch the surface of the front panel when wiped strongly.)

• If the front panel is dusty, use an anti-static brush, which is commercially available, to clean it.

• To avoid scratching the frame or screen, please use a soft, lint free cloth for cleaning. Approved cleaning cloths are

available directly from Sharp in single (00Z-LCD-CLOTH) or triple (00Z-LCD-CLOTH-3) packs. Call 1-800-BE-SHARP for

ordering, or VISIT http://www.sharpusa.com/SharpDirect.

CHILD SAFETY:

It Makes A Difference How and Where You Use Your Flat Panel Display

Congratulations on your purchase! As you enjoy your new product, please keep these safety tips in mind:

THE ISSUE

• The home theater entertainment experience is a growing trend and larger ﬂat panel displays

are popular purchases. However, ﬂat panel displays are not always supported on the proper

stands or installed according to the manufacturer’s recommendations.

• Flat panel displays that are inappropriately situated on dressers, bookcases, shelves, desks,

speakers, chests or carts may fall over and cause injury.

THIS MANUFACTURER CARES!

• The consumer electronics industry is committed to making home entertainment enjoyable

and safe.

TUNE INTO SAFETY

• One size does NOT ﬁt all. Follow the manufacturer’s recommendations for the safe installation

and use of your ﬂat panel display.

• Carefully read and understand all enclosed instructions for proper use of this product.

• Don’t allow children to climb on or play with furniture and television sets.

• Don’t place ﬂat panel displays on furniture that can easily be used as steps, such as a chest

of drawers.

• Remember that children can become excited while watching a program, especially on a

“larger than life” ﬂat panel display. Care should be taken to place or install the display where it

cannot be pushed, pulled over, or knocked down.

• Care should be taken to route all cords and cables connected to the ﬂat panel display so that

they cannot be pulled or grabbed by curious children.

WALL MOUNTING: IF YOU DECIDE TO WALL MOUNT YOUR FLAT PANEL DISPLAY, ALWAYS:

• Use a mount that has been recommended by the display manufacturer and/or listed by an independent laboratory (such

as UL, CSA, ETL).

• Follow all instructions supplied by the display and wall mount manufacturers.

• If you have any doubts about your ability to safely install your ﬂat panel display, contact your retailer about professional

installation.

• Make sure that the wall where you are mounting the display is appropriate. Some wall mounts are not designed to be

mounted to walls with steel studs or old cinder block construction. If you are unsure, contact a professional installer.

• A minimum of two people are required for installation. Flat panel displays can be heavy.

Note: CEA is the preeminent trade association promoting growth in the $161 billion U.S.

consumer electronics industry. More than 2,200 companies enjoy the beneﬁts of CEA

membership, including legislative advocacy, market research, technical training and

education, industry promotion and the fostering of business and strategic relationships

Download from Www.Somanuals.com. All Manuals Search And Download.

Contents

IMPORTANT INFORMATION ............................. 1-2

DEAR SHARP CUSTOMER .................................... 3

IMPORTANT SAFETY INSTRUCTIONS............. 3-5

Enjoying Photo/Music/Video Playback

Connecting a USB Memory Device/

USB Hard Drive.............................................. 40

Connecting a Home Network (DLNA) Server..... 40

Selecting the Folders to Play Back.................... 41

Playing Back Files on a USB Memory Device/

Home Network (DLNA) Server ................. 42-46

Supplied Accessories............................................. 7

QUICK REFERENCE

Attaching the Stand............................................ 7

QUICK INSTALLATION TIPS............................... 8

Experiencing HD Images..................................... 8

Using the Remote Control Unit ........................... 8

Other Viewing Options

Presetting Remote Control Function ................. 47

Operating the Connected Equipment.......... 47-48

Preparation

Using AQUOS LINK

Antennas ............................................................ 9

Installing Batteries in the Remote Control Unit..... 9

Controlling HDMI Equipment

Using AQUOS LINK.................................. 49-51

Link Operation Menu .................................. 51-52

Part Names

TV (Front).......................................................... 10

TV (Rear/Side)................................................... 10

Remote Control Unit......................................... 11

Using a PC

Displaying a PC Image on the Screen............... 53

Adjusting the PC Image .................................... 54

Setting Audio Input ........................................... 54

PC Compatibility Chart ..................................... 54

Control of the TV ........................................ 55-56

Introduction to Connections

Types of Connection......................................... 12

Displaying an External Equipment Image........... 12

Using the Internet

Connecting to External Equipment

Connecting to the Internet ................................ 57

Internet Setup............................................. 58-59

AQUOS Advantage Live.................................... 59

Entering Text (Software Keyboard).................... 60

Using the Browser ...................................... 61-63

Using Applications via the Internet .............. 64-65

Connecting a Blu-ray Disc/DVD Player or

HD Cable/Satellite Set-top Box ................ 13-14

Connecting a VCR, Game Console,

Camcorder or Cable/Satellite Set-top Box..... 14

Connecting a Surround System/Audio System... 15

Connecting a PC .............................................. 16

Appendix

Watching TV

Attaching the Stand (for LC-80LE633U)............ 66

Removing the Stand ......................................... 67

Setting the TV on the Wall........................... 68-69

Troubleshooting.......................................... 70-71

Troubleshooting - Error Message...................... 71

Turning On/Off the Power................................. 17

Initial Installation.......................................... 17-19

Direct Button Operation

INPUT .......................................................... 20

Changing Channels...................................... 20

Changing Volume......................................... 20

MUTE........................................................... 20

Sleep Timer.................................................. 20

FREEZE ....................................................... 20

FLASHBACK................................................ 21

SmartCentral................................................ 21

NETFLIX....................................................... 21

AV MODE .................................................... 21

AUDIO.................................................... 21-22

Closed Captions and

Trademarks........................................................... 72

Speciﬁcations

TV............................................................... 73-74

Optional Accessory........................................... 74

Wireless LAN.................................................... 75

Information on the Software License for

This Product ................................................. 76-78

Calling for Service ................................................ 79

LIMITED WARRANTY........................................... 79

Digital Closed Captions.............................. 22

VIEW MODE................................................. 23

Dimensional Drawings

• The dimensional drawings for the LCD TV set are shown

on the inside back cover.

On-Screen Display Menu

On-Screen Display Menu Operation.................. 24

Menu Operation Buttons................................... 24

Menu Items....................................................... 25

Picture Settings .......................................... 26-27

Audio Settings .................................................. 28

Power Control .................................................. 29

System Options.......................................... 30-32

Initial Setup................................................. 33-36

Information ................................................. 37-39

• The illustrations and on-screen displays in this operation manual are for explanation purposes and may vary slightly from

the actual operations.

• The examples used throughout this manual are based on the LC-70LE640U model.

Download from Www.Somanuals.com. All Manuals Search And Download.

Supplied Accessories

Make sure the following accessories are provided with the product.

LC-80LE633U

70 ⁷/8 inches

1,800 mm (approx.)

Remote control unit ( 1)

“AAA” size battery ( 2)

Stand unit ( 1)

Pages 7, 66

AC cord ( 1)

Page 8

Page 9

Operation manual ( 1)

Connection guide ( 1)

■

• Always use the AC cord supplied with the TV.

• The illustrations above are for explanation purposes and may vary slightly from the actual accessories.

QUICK REFERENCE

Attaching the Stand

• Before attaching (or detaching) the stand, unplug the AC cord.

• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.

CAUTION

• Attach the stand in the correct direction.

• Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.

• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.

• After attaching the stand to the TV, do not hold the stand when you put up, set up, move or lay down the TV.

LC-70LE640U/LC-60LE640U/LC-52LE640U/LC-70C6400U/LC-60C6400U/LC-52C6400U

■

Refer to page 66 for the instructions on the installation of the LC-80LE633U.

Conﬁrm that there are 12 screws (8 long screws

and 4 short screws) supplied with the stand unit.

Insert and tighten the 4 screws into the 4 holes on

the rear of the TV.

Set the post for the stand unit onto the

polystyrene foam.

Short screws

Attach the base to the post.

Insert and tighten the 8 screws into the 8 holes

on the bottom of the base.

• Hold the stand unit securely with one hand, and then

tighten the screws.

Long

screws

• In the installation procedure, be careful not to catch your

ﬁngers between the TV set and the ﬂoor.

FRONT

Insert the stand into the openings on the bottom of the TV.

• Make sure that the stand is ﬁrmly inserted into the TV.

Improper installation may result in tilting of the TV set.

Soft cushion

Download from Www.Somanuals.com. All Manuals Search And Download.

QUICK REFERENCE

QUICK INSTALLATION TIPS

Experiencing HD Images

Attach your antenna to the back of the television.

(See page 9.)

An HDTV without an HD source is just an ordinary

TV.

To enjoy HD images on the TV, you should get

HD programming from the following:

• Over-the-air broadcasting via HD quality antenna

• HD cable/satellite subscription

Connect the AC plug for the television into the AC

outlet.

LC-80LE633U

• HD compatible external equipment

• For information on updating to HD programming, ask your

cable/satellite service provider.

Using the Remote Control Unit

Use the remote control unit by pointing it towards the

remote control sensor on the TV. Objects between the

remote control unit and the remote control sensor may

prevent proper operation.

AC outlet

• Bundle the cords properly with the cable tie.

LC-70LE640U LC-60/52LE640U

LC-70C6400U LC-60/52C6400U

17´ (5 m)

30º

Remote control sensor

30º

AC outlet

• Place the TV close to the AC outlet, and keep the power

plug within reach.

Cautions regarding the remote control unit

■

• Do not expose the remote control unit to shock. In addition,

do not expose the remote control unit to liquids, and do not

place in an area with high humidity.

• Do not install or place the remote control unit under direct

sunlight. The heat may cause deformation of the remote

control unit.

• The remote control unit may not work properly if the remote

control sensor on the TV is under direct sunlight or strong

lighting. In such cases, change the angle of the lighting

or the TV, or operate the remote control unit closer to the

remote control sensor.

• TO PREVENT RISK OF ELECTRIC SHOCK, DO NOT

TOUCH UN-INSULATED PARTS OF ANY CABLES

WITH THE AC CORD CONNECTED.

When turning on the TV for the ﬁrst time, press

POWER on the television.

• For model LC-80LE633U, the control panel is located

on the left side of the TV as seen from the front.

POWER

IMPORTANT:

IF THE UNIT DOES NOT POWER ON - UNPLUG THE

TELEVISION FROM THE OUTLET AND REPEAT THE

INSTALLATION STEPS.

Insert the batteries into the remote control unit. (See

page 9.)

IF YOU STILL ENCOUNTER NO POWER, PLEASE CONTACT

US AT 1-800-BE-SHARP.

• Speakers cannot be detached from the TV.

• The TV angle cannot be adjusted.

Download from Www.Somanuals.com. All Manuals Search And Download.

Preparation

Antennas

To enjoy a clearer picture, use an outdoor antenna. The following is a brief explanation of the types of connections

that are used for a coaxial cable. If your outdoor antenna uses a 75-ohm coaxial cable with an F-type connector,

plug it into the antenna terminal at the rear of the TV set. For connecting the antenna cable to the TV, use

commercially available cables.

Connecting Antenna Cable

• Connect the antenna cable to the TV using one of the methods in the illustration as shown (

1 2 3

Home Antenna

terminal (75-ohm)

Cable TV lead-In

Cable without a CATV

converter

Coaxial cable

Home Antenna

VHF/UHF antenna

terminal (75-ohm)

75-ohm coaxial cable (round)

Coaxial cable

Combination VHF/

UHF antenna

300/75-ohm adapter

300-ohm twin-lead cable (ﬂat)

VHF

UHF

Separate VHF/UHF

antenna

300-ohm

twin-lead cable

ANTENNA ANTENNA

OUT

300-ohm twin-lead cable

75-ohm coaxial cable

To TV antenna

terminal

Combiner

F-type connector

75-ohm coaxial cable (round)

1.A 75-ohm system is generally a round cable with F-type connector

that can easily be attached to a terminal without tools.

2.A 300-ohm system is a ﬂat “twin-lead” cable that can be attached

to a 75-ohm terminal through a 300/75-ohm adapter.

300-ohm twin-lead cable (ﬂat)

NOTICE

F-type connector should be ﬁnger-tightened only.

F-type connector

When connecting the RF cable to the TV set, do not tighten F-type

connector with tools.

If tools are used, it may cause damage to your TV set. (The breaking

of internal circuit, etc.)

75-ohm coaxial cable

Installing Batteries in the Remote Control Unit

If the remote control fails to operate TV functions, replace the batteries in the remote control unit.

1 Open the battery cover.

2 Insert two “AAA” size batteries (supplied with

the product).

3 Close the battery cover.

• Place the batteries

with their terminals

corresponding to the (

)

and ( ) indications in the

battery compartment.

CAUTION

Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.

• Do not mix batteries of different types. Different types of batteries have different characteristics.

• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause chemical leakage

in old batteries.

• Remove batteries as soon as they are worn out. Chemicals that leak from batteries that come in contact with skin can cause a

rash. If you ﬁnd any chemical leakage, wipe thoroughly with a cloth.

• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.

• If you will not be using the remote control unit for an extended period of time, remove batteries from it.

Download from Www.Somanuals.com. All Manuals Search And Download.

Part Names

TV (Front)

OPC sensor *

Remote control sensor

Center Icon illumination

(See page 32.)

* OPC: Optical Picture Control (See page 26.)

TV (Rear/Side)

RS-232C terminal

POWER

button

PC IN terminal

VIDEO 2

button

terminals

INPUT

button

VIDEO 1

terminals

Channel

buttons

COMPONENT

terminals

(CH

)

U V

Volume

buttons

(VOL

)

k l

AUDIO OUT terminal

USB 1 terminal

HDMI 1 terminal

ARC: Audio Return Channel

(See pages 49 and 50.)

HDMI 2 terminal

Antenna/

Cable in

DIGITAL AUDIO

OUTPUT terminal

USB 2

terminal

HDMI 3 terminal

ETHERNET

terminal

AUDIO IN terminal

(shared for PC IN

and HDMI 1) *3

HDMI 4 terminal

*1 See pages 12 to 16 and 49 for external equipment connection.

*2 See pages 12, 17 and 24 for button operations.

For model LC-80LE633U, the control panel is located on the left side of the TV as seen from the front.

*3 See page 54 for details on the Audio Select function.

Download from Www.Somanuals.com. All Manuals Search And Download.

Part Names

POWER: Switch the TV power on or enter standby. (See

page 17.)

Remote Control Unit

TV, STB, DVD•VCR, AUDIO: Switches the remote

control for TV, STB, BD, DVD, VCR and AUDIO operation.

(See pages 47 to 48 for details.)

* To enter the code registration mode, you need to press

an appropriate button (STB, DVD•VCR or AUDIO) and

DISPLAY at the same time.

External equipment operational buttons: Operate the

external equipment.

OPTION: Display the Link Operation Menu screen. This

button will function only when AQUOS LINK is used. (See

pages 49 to 52 for details.)

SLEEP: Set the sleep timer. (See page 20.)

0–9: Set the channel. (See page 20.)

• (DOT): (See pages 20 and 47.)

CC: Display captions from a closed-caption source. (See

page 22.)

AV MODE: Select an audio or video setting. (See page 21.)

10 MUTE: Mute the sound. (See page 20.)

11 VOL : Set the volume. (See page 20.)

k l

12 MENU: Display the menu screen. (See page 24.)

13 AAL: Display the TV Web screen. (See pages 59 to 63

for details.)

, ENTER: Select a desired item on the screen.

a b c d

15 EXIT: Turn off the menu screen.

16 FAVORITE CH: Set the favorite channels. (See page 34.)

17 A, B, C, D: Select 4 preset favorite channels in 4 different

categories. (See page 34.)

While watching, you can toggle the selected channels by

pressing A, B, C and D.

18 DISPLAY: Display the channel information.

19 POWER (SOURCE): Turns the power of the external

equipment on and off.

20 FREEZE: Set the still image. Press again to return to

normal screen. (See page 20.)

21 AUDIO: Selects the MTS/SAP or the audio mode during

multichannel audio broadcasts. (See pages 21 to 22.)

22 ENT: Jumps to a channel after selecting with the 0–9

buttons.

23 FLASHBACK: Return to the previous channel or external

input mode. (See page 21.)

24 VIEW MODE: Select the screen size. (See pages 23 and

53.)

25 INPUT: Select a TV input source. (TV, HDMI1, HDMI2,

HDMI3, HDMI4, COMPONENT, VIDEO1, VIDEO2, PC IN,

Home Network (DLNA), USB) (See pages 12 and 20.)

26 CH

: Select the channel. (See page 20.)

U V

• When using the remote control unit, point it at the TV.

27 SmartCentral: Display the application window. (See

page 21.)

28 RETURN: Return to the previous menu screen.

29 NETFLIX: Display the Netﬂix screen. (See page 21.)

30 FAV APP 1, 2, 3: You can assign your favorite

applications to these buttons. (See page 34.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Introduction to Connections

Types of Connection

For connecting the TV to external equipment, use commercially available cables.

• The illustrations of the terminals are for explanation purposes and may vary slightly from the actual products.

Connecting to video equipment or PC

■

Image quality differs depending on the terminal used. To enjoy clearer images, check the output terminals of your

external equipment and use its appropriate terminals for higher quality images.

Image

Quality

Terminal

on the TV

Terminal on external

equipment

Cable

Quality

HDMI-certiﬁed cable

Pages

13, 15, 16

Ø 3.5 mm stereo minijack cable

AUDIO

Pages

13, 16

DVI OUT

DVI-HDMI conversion cable

Component video cable

Page 14

Audio cable

AV cable

Standard

Quality

Connecting to audio equipment

■

Terminal on external

equipment

Terminal on the TV

Cable

Optical ﬁber cable

Page 15

OPTICAL

DIGITAL AUDIO INPUT

Ø3.5 mm stereo minijack to RCA audio cable

ANALOG AUDIO IN

Displaying an External Equipment Image

To view external source images, select the input source by pressing INPUT on the remote control unit or on the TV.

• For model LC-80LE633U, the control panel is located on the left side of the TV as seen from the front.

Example

Press INPUT.

• The INPUT list screen displays.

Input

Press

to select the input source.

a b

AIR

• You can also select the input source by pressing

INPUT. Each time INPUT is pressed, the input source

toggles.

INPUT

HDMI1

HDMI2

HDMI3

HDMI4

HDMI1

HDMI2

HDMI3

• An image from the selected source automatically

displays.

• If the corresponding input is not plugged in, you

cannot change the input. Be sure to connect the

equipment beforehand.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to External Equipment

You can connect many types of external equipment to your TV. To view external source images, select the input

source from INPUT on the remote control unit or on the TV. (See pages 12 and 20.)

For connecting the TV to external equipment, use commercially available cables.

CAUTION

• To protect equipment, always turn off the TV before connecting any external equipment.

• Please read the relevant operation manual (Blu-ray disc player, etc.) carefully before making connections.

Connecting a Blu-ray Disc/DVD Player or HD Cable/Satellite Set-top Box

When using HDMI cable (HDMI 1, 2, 3 or 4):

■

The HDMI (High Deﬁnition Multimedia Interface) terminal is an audio-video interface that enables a connection for audio and

video signals using a single cable. The HDMI terminal supports high-resolution video input.

• Blu-ray disc player

• DVD player

• HD cable/satellite set-top box

HDMI-certiﬁed cable

HDMI OUT

• To enjoy 1080p display capability, connect your external equipment using an HDMI-certiﬁed cable or a component cable and

set the equipment to 1080p output.

• Supported Audio format: Linear PCM, sampling rate 32/44.1/48kHz.

• When you connect external equipment using a DVI-HDMI conversion cable or when you connect ARC-compatible

equipment, use HDMI 1.

When using DVI-HDMI conversion cable (HDMI 1):

■

• Blu-ray disc player

• DVD player

• HD cable/satellite set-top box

DVI-HDMI conversion cable

Ø 3.5 mm stereo minijack cable

AUDIO

DVI OUT

• When using a DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to

connecting a DVI-HDMI conversion cable to the HDMI 1 terminal, connect a Ø 3.5 mm stereo minijack cable to the AUDIO IN

terminal and set "Audio Select" to "HDMI+Analog". (See page 54.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to External Equipment

When using Component cable (COMPONENT):

■

• Blu-ray disc player

• DVD player

• HD cable/satellite set-top box

Audio cable

AUDIO-R (Red)

AUDIO-L (White)

COMPONENT OUT

(Red)

Y (Green)

(Blue)

Component video cable

• To enjoy 1080p display capability, connect your external equipment using an HDMI-certiﬁed cable or a component cable and

set the equipment to 1080p output.

• See page 13 for connecting a Blu-ray disc player, DVD player or an HD cable/satellite set-top box to the HDMI terminal.

Connecting a VCR, Game Console, Camcorder or Cable/Satellite Set-top Box

When using Composite cable (VIDEO 1 or 2):

■

• Game console

• Camcorder

• VCR

• Cable/Satellite set-top box

VIDEO (Yellow)

AV cable

AUDIO-L (White)

AUDIO-R (Red)

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to External Equipment

Connecting a Surround System/Audio System

When connecting an AV ampliﬁer for surround system

■

HD Cable/Satellite set-top box

HDMI-certiﬁed cable *1

HDMI OUT

OPTICAL

DIGITAL AUDIO INPUT HDMI OUT HDMI IN

Optical ﬁber cable *2

• Letting the TV output the audio to an AV ampliﬁer:

*1 When you connect ARC-compatible equipment, use the HDMI 1 terminal.

*2 If the equipment to be connected is not compatible with the ARC, connect an optical ﬁber cable.

• If the image is not in sync with the audio, check the settings of the connected surround system.

When connecting an Audio ampliﬁer

■

It is possible to output audio through the DIGITAL AUDIO OUTPUT terminal. (See page 30 for details.) PCM audio

outputs from the terminal.

Optical ﬁber cable

OPTICAL

DIGITAL AUDIO INPUT

• Depending on the connected equipment, audio will not output from the DIGITAL AUDIO OUTPUT terminal in HDMI

connection. In this case, set the audio formats of the connected equipment to PCM, 32/44.1/48 kHz.

•

Optical digital audio will be output in 2-ch stereo when it is from the external equipment connected to the TV using an HDMI cable.

Ø3.5 mm stereo minijack to RCA audio cable

ANALOG AUDIO IN

• See page 31 for details on the Output Select function.

Download from Www.Somanuals.com. All Manuals Search And Download.

Connecting to External Equipment

Connecting a PC

Refer to page 54 for a list of PC signals compatible with the TV.

When using HDMI cable (HDMI 1, 2, 3 or 4):

■

HDMI-certiﬁed cable

HDMI OUT

• Depending on the board, only video signals may be output. In this case, in addition to connecting an HDMI-certiﬁed cable

to the HDMI 1 terminal, connect a Ø 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio Select" to

"HDMI+Analog". (See page 54.)

• The HDMI terminals only support digital signal.

When using DVI-HDMI conversion cable (HDMI 1):

■

DVI-HDMI conversion cable

DVI OUT

AUDIO

Ø 3.5 mm stereo minijack cable

• When using a DVI-HDMI conversion cable, you should make an analog audio connection. In this case, in addition to

connecting a DVI-HDMI conversion cable to the HDMI 1 terminal, connect a Ø 3.5 mm stereo minijack cable to the AUDIO IN

terminal and set "Audio Select" to "HDMI+Analog". (See page 54.)

When using analog RGB cable (PC IN):

■

Analog RGB cable

(D-sub 15-pin cable or VGA cable)

Ø 3.5 mm stereo minijack cable

AUDIO

RGB

• When using an analog RGB cable, input the audio signal to the AUDIO IN terminal of PC IN.

• When connecting a PC to the PC IN, set "Audio Select" to "Video+Audio". (See page 54.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Watching TV

Turning On/Off the Power

Initial Installation

When you turn on the TV for the ﬁrst time, it will

automatically memorize the broadcasting channels

available in the region where you live. Perform the

following steps before you press POWER on the

remote control unit.

POWER

1. Insert the batteries into the remote control unit. (See page 9.)

2. Connect the antenna cable to the TV. (See page 9.)

3. Plug in the AC cord to the AC outlet. (See page 8.)

POWER (On/Standby)

Language (Language setting)

Select from among 3 languages: English, French and

Spanish.

Press

to select the desired language listed

on the screen, and then press ENTER.

Press POWER on the TV or on the remote control unit

to turn the power on.

• For model LC-80LE633U, the control panel is located on

the left side of the TV as seen from the front.

Language

Location & Time

English

TV Location

Français

Español

Antenna & Cable/STB

Air/Cable

CH Search

Completed

• The Initial Installation starts when the TV powers on for the

ﬁrst time. If the TV has been turned on before, the Initial

Installation will not be invoked. For changing the settings of

the Initial Installation, perform "EZ setup" on the Initial Setup

menu on page 33.

Location & Time

Make settings for the country, area and time zone

where you use the TV.

Press

to select "United States", "Canada" or

Press POWER on the TV or on the remote control unit

again to turn the power off.

• The TV enters standby and the image on the screen

disappears.

"Mexico", and then press ENTER.

United States

Canada

Mexico

• If you are not going to use this TV for a long period of time,

be sure to remove the AC cord from the AC outlet.

• Weak electric power is still consumed even when the TV is

turned off.

Download from Www.Somanuals.com. All Manuals Search And Download.

Watching TV

Press

to select the time zone where you are

Antenna & Cable/STB

Select the type of connection you will use to

watch TV.

using the TV, and then press ENTER.

Example

c d

Press

to select "Antenna & Cable" or "Set-

top box", and then press ENTER.

EST

CST

MST

PST

Antenna & Cable

Set-top box

AKST

HAST

• The time zone differs depending on the selected

country.

• The factory preset value is the time zone for the capital

of the selected country.

To watch TV via an antenna or cable

connection (without using a set-top box):

Select "Antenna & Cable", and then go to step 7.

To watch TV via a set-top box:

Press

to select the Daylight Savings Time,

Select "Set-top box", and then press ENTER.

and then press ENTER.

To watch TV, select the input source

corresponding to the terminal connected to the

set-top box. When doing so, you must make

Auto

Manual

Off

c d

to select

the setting to skip "TV". Press

"On", and then press ENTER.

• “Auto” is the default selection.

TV Location

Off

Select "Home" or "Store" for the location where

you plan to install the TV. This product qualiﬁes for

ENERGY STAR in Home mode default setting.

• When this is set to "On", the channel on the TV

cannot be changed using the remote control unit or

c d

to select "Home" or "Store".

Press

Press ENTER to enter the setting.

menu. (e.g. CH

, Favorite CH, etc.)

U V

• See page 30 for details on the Input Skip function.

Select

Press INPUT to select the input source

corresponding to the terminal connected to the

set-top box. Make the necessary settings on

the connected external equipment.

Home

Store

• See the operation manual of the connected

equipment for setting up the equipment.

Home: “Power Saving” is set to "Advanced", and AV

MODE is set to "STANDARD".

Store: “Power Saving” is set to "Off" and AV MODE is

set to "DYNAMIC (Fixed)". Picture Reset and Feature

Demo can be set.

Air/Cable (Antenna setting)

Make sure what kind of connection is made with your

TV when selecting "Air" or "Cable".

Picture Reset: AV MODE will be set to "DYNAMIC (Fixed)"

regardless of whether Picture Reset is "On" or "Off". If you

select "On", AV MODE will be reset to "DYNAMIC (Fixed)" if

there is no operation for 30 minutes. When "Off" is selected,

c d

Press

to select "Air" or "Cable".

Press ENTER to enter the setting.

AV MODE will be set to "DYNAMIC (Fixed)".

Feature Demo: When “On” is selected, after all the settings

are completed, the Feature Demo screen is displayed if there

is no operation for several minutes.

Air

Cable

• ENERGY STAR qualiﬁcation is based on AV MODE

"STANDARD".

Download from Www.Somanuals.com. All Manuals Search And Download.

Watching TV

CH Search (Channel search)

Channel auto search makes the TV look for all

channels viewable in the set area.

Completed

The settings conﬁrmation screen is displayed.

Conﬁrm the information displayed on the screen,

and then press ENTER.

When "Air" is selected in Antenna setting:

c d

Press

ENTER.

to select "Start", and then press

Examples of the settings conﬁrmation screen

When one or more channel is received after

"Antenna & Cable" was selected in step 6 and a

search was carried out.

Start

Cancel

Language

: English

Location & Time

TV Location

: United States/EST/Auto

: Home

Antenna & Cable/STB : Antenna & Cable

Air/Cable

: Air

Search Result

: Digital 4ch

Analog 7ch

When "Cable" is selected in Antenna setting:

Press

to select "Analog & Digital Search

Press the INPUT button,

then the right arrow d,

to see the list of channels found.

Start" to search both analog and digital

broadcasts, or to select “Analog Search Start”

to search only analog broadcasts, and then

press ENTER.

When no channel is received after "Antenna &

Cable" was selected in step 6 and a search was

carried out.

Analog & Digital Search Start

Analog Search Start

Cancel

Language

: English

Location & Time

TV Location

: United States/EST/Auto

: Home

Antenna & Cable/STB : Antenna & Cable

Air/Cable

Search Result

: Cable

: No channel

• The Channel search will start automatically.

• To exit the Channel search screen, select "Cancel",

and then press ENTER.

Channel not found.

Antenna/Cable are not properly connected

or Air/Cable setup is incorrect.

Please check your Antenna/Cable connection

and Air/Cable setup.

The Channel search results may include

scrambled channels or channels that are not

c d

viewable in the set area. Press

to select

"Yes", and then press ENTER to remove

scrambled channels.

When "Set-top box" was selected in step 6 and a

search was carried out.

Language

Location & Time

TV Location

: English

: United States/EST/Auto

: Home

Yes

Antenna & Cable/STB : Set-top box

TV Input Skip : On

Please make sure to change INPUT to the

speciﬁc input terminal you are connecting

your set-top box to get the picture.

Closed caption, sub-channel audio

and channel selection need to be selected

with your set-top box.

• If no channel is found, conﬁrm the type of connection

made with your TV and try "EZ Setup" again.

(See page 33.)

• For changing the settings of the Initial Installation, perform

"EZ setup" on the Initial Setup menu on page 33.

• To see the list of channels found during Channel search,

press INPUT, and then press

Download from Www.Somanuals.com. All Manuals Search And Download.

Direct Button Operation

Changing Volume

You can change the volume by pressing VOL

k l

the TV or on the remote control unit.

• To increase the volume, press VOL

• To decrease the volume, press VOL

Audio status

Output Select

Output device

Speaker

Fixed

Variable

Variable sound

Mute

• When "Output Select" is set to "Variable", the indicator on

the screen changes as shown below.

INPUT

To view external source images, select the input source by

• See page 31 for details on the Output Select function.

pressing INPUT on the remote control unit or on the TV.

MUTE

Press INPUT.

• The INPUT list screen displays.

Mutes the current sound output.

Press MUTE.

• " " will be displayed on the screen for 30 minutes, and

the sound is silenced.

Press

or press INPUT again to select the

a b

input source.

• An image from the selected source automatically

displays.

• Each time INPUT is pressed, the input source toggles.

• If the corresponding input is not plugged in, you cannot

change the input. Be sure to connect the equipment

beforehand.

• Within 30 minutes of pressing MUTE, mute can be

canceled by pressing VOL or MUTE.

k l

• Mute will be canceled after 30 minutes have passed.

However, the TV will not suddenly output a loud sound as

the volume level is set to 0 automatically.

Sleep Timer

• See pages 12 to 16 and 49 for external equipment

connection.

Allows you to set a time when the TV automatically

switches to standby.

Changing Channels

You can change channels in several ways.

Press SLEEP.

•

The remaining time displays when the sleep timer has been set.

• Each time you press SLEEP, the remaining time switches

Method 1

as shown below.

U V

Using CH

on the remote control unit or on the TV.

Off

120

Method 2

Using remote control buttons 0-9, • (DOT).

• When set, the time automatically starts counting down.

• If you want to adjust the sleep timer, you can press SLEEP

twice then change the time setting.

• When it is 5 minutes before the time expires, the remaining

time will start to keep appearing every minute.

Examples:

To select a 1 or 2-digit channel number (e. g., Channel 5):

Press 5

ENT.

To select a 3-digit channel number (e. g., Channel 115):

Press 1 ENT.

To select a 4-digit channel number (e. g., Channel 22.1):

Press 2 • (DOT) ENT.

• Select "Off" by pressing SLEEP to cancel the sleep timer.

The TV will enter standby when the remaining time reaches 0.

Method 3

•

Selecting the program from Channel list.

FREEZE

Press INPUT on the remote control unit.

Allows you to capture and freeze a moving image that

• The INPUT list displays.

you are watching.

Press c d to select "AIR" or "CABLE".

Press FREEZE.

• The Channel list displays.

• A moving image is captured.

Press

to select the desired channel, and then

a b

• Press FREEZE again to cancel the function.

press ENTER.

• When this function is not available, "No displaying still

image available." will display.

• When selecting a 1-digit channel number, it is not

necessary to press 0 before the number.

• The still image automatically goes out after 30 minutes.

• If you are using the freeze function and a broadcast

activates the V-CHIP BLOCK, the freeze function will be

canceled and a V-CHIP BLOCK message will appear.

• You can have the same settings by choosing "Freeze" on

the menu items. (See page 30.)

• When you enter 0-9 only, channel selection will be made if

there is no operation within a few seconds.

• If you push "0" by itself, nothing will happen.

• Complete the above steps within a few seconds.

• When you enter 0-9 and • (DOT), channel selection will be

made if there is no operation within a few seconds.

Download from Www.Somanuals.com. All Manuals Search And Download.

Direct Button Operation

FLASHBACK

AUTO: Optimizes the image quality automatically based

on the room brightness and image signal.

STANDARD: For a highly deﬁned image in a normal

lighting.

Press FLASHBACK to switch to the previously tuned

channel or previous input mode.

• Press FLASHBACK again to switch back to the currently

MOVIE: For a movie.

tuned channel.

GAME: Lowers image brightness for easier viewing.

PC: For PC.

USER: Allows the user to customize settings as desired.

You can set the mode for each input source.

DYNAMIC: For a clear-cut image emphasizing high

contrast, useful for sports viewing.

DYNAMIC (Fixed): Changes the image and sound

settings to the factory preset values. No adjustments

are allowed.

• FLASHBACK will not work if no channel has been

changed after the TV is turned on.

SmartCentral

Allows you to directly activate various types of

applications.

Press SmartCentral to display the application

window.

Press

to select the desired application,

a b c d

and then press ENTER.

• You can select a different AV MODE item for each input

mode. (For example, select STANDARD for TV input and

DYNAMIC for COMPONENT.)

• When you play games, "GAME" is recommended for AV

MODE.

You cannot set "GAME" or "PC" when the TV is connected

to the Internet or when the input source is "Home Network

(DLNA)" or "USB".

• You can have the same settings by choosing "AV MODE"

on the menu items. (See page 26.)

• If “

check the USB connection.

• If “ ” or “ ” is displayed after you switch to

” is displayed after you switch to USB mode,

Home Network (DLNA) mode or after you connect to

the Internet, check your TV’s network settings and

connection.

•

• See pages 41 and 64 for details of viewable applications.

• You can display the application window by choosing “APPS”

on the menu items. (See page 30.)

• When this function is not available, “Can not operate this

function now” will display.

AUDIO

■ MTS/SAP stereo mode

The TV has a feature that allows reception of sound

other than the main audio for the program. This feature

is called Multi-channel Television Sound (MTS). The TV

with MTS can receive mono sound, stereo sound

and Secondary Audio Programs (SAP). The SAP feature

allows a TV station to broadcast other information,

which could be audio in another language or something

completely different like weather information.

NETFLIX

Displays the Netﬂix screen.

Press NETFLIX.

• To enjoy Netﬂix, you need to make:

—a broadband Internet connection (See page 57.)

—settings of Internet Setup (See pages 58 and 59.)

—adjustments for Netﬂix (See page 64.)

You can enjoy Hi-Fi stereo sound or SAP broadcasts

where available.

• Stereo broadcasts: View programs like live sporting

events, shows and concerts in dynamic stereo sound.

• SAP broadcasts: Receive TV broadcasts in either MAIN

or SAP sound.

MAIN sound: The normal program soundtrack (either in

mono or stereo).

AV MODE

AV MODE gives you several viewing options to choose

from to best match the surrounding environment of the

TV, which can vary due to factors like room brightness,

type of program watched or the type of image input

from external equipment.

SAP sound: Listen to a second language, supplementary

commentary or other information. (SAP is mono sound.)

Press AV MODE. Current AV MODE displays.

• Press AV MODE again before the mode displayed on the

screen disappears. The mode changes as shown below:

If stereo sound is difﬁcult to hear.

• Obtain a clearer sound by manually switching to ﬁxed

mono-sound mode.

Example:

When the input source is TV, COMPONENT,

VIDEO 1 or 2

You can change MTS as shown below to match the

television broadcast signal.

AUTO

STANDARD

MOVIE

GAME

Press AUDIO to toggle between audio modes.

DYNAMIC (Fixed)

DYNAMIC

USER [TV]

Examples: when receiving MTS and SAP

Example:

STEREO

MONO

STEREO mode:

STEREO + SAP mode:

When the input source is PC IN or HDMI 1 to 4

ST(SAP) SAP(ST)

MONO

AUTO

STANDARD

GAME

]

MOVIE

MAIN

SAP

MAIN + SAP mode:

DYNAMIC (Fixed)

DYNAMIC

USER[

MONO mode: MONO

Download from Www.Somanuals.com. All Manuals Search And Download.

Direct Button Operation

Digital broadcasting audio mode

■

Press CC.

The types of audio transmitted in a digital broadcast include

SURROUND as well as MONO and STEREO. In addition, it

is possible for multiple audio tracks to accompany a single

video track.

•

This will present the Closed Caption information display.

Press CC while the Closed Caption information is

still on the screen.

• Press repeatedly until you select the desired closed

caption service.

Press ENTER to toggle between audio modes.

Example: when receiving Digital broadcasting

Air

STEREO (Audio1)

STEREO (Audio2)

DIGITAL

SURROUND (Audio3)

22.1

Audio

Video

STEREO

480p (4:3)

1/2 CC1

NONE

• MTS only operates while in TV mode.

• You can have the same settings by choosing “Change

Audio” on the menu items. (See page 30.)

Closed Caption

information

Ratings

• Depending on the number of caption services in the

signal being received, you will see information such as

1/2 or 1/4 displayed.

Closed Captions and Digital Closed Captions

Your TV is equipped with an internal Closed Caption

decoder. It allows you to view conversations, narration

and sound effects as subtitles on your TV. Closed

Captions are available on some TV programs and on

some VHS home video tapes at the discretion of the

program provider.

1/2 means “the ﬁrst of two services”.

Example:

If a program has three services (Digital CC(ENG), CC1

and Text1), the closed caption display will toggle in this

sequence:

1/3 ENG

2/3 CC1

3/3 Text1

Off

Digital Closed Caption service is a new caption service

available only on digital TV programs (also at the

discretion of the service provider). It is a more ﬂexible

system than the original Closed Caption system,

because it allows for a variety of caption sizes and font

styles. When the Digital Closed Caption service is in

use, it will be indicated by the appearance of a 3-letter

abbreviation that also indicates the language of the

Digital Closed Captions: ENG (English), SPA (Spanish),

FRA (French) or other language codes.

• The CC button keeps a record of the last service

selected in its memory.

If the last closed caption mode (e.g. 1/3 ENG) you

selected is not available for the next program, or on

another channel, the closed caption service that is

available is automatically selected, and this service

appears in parentheses, e.g. “1/3(CC1)”.

Closed Caption services that appear in parentheses will

not be stored in the CC button's memory as your last

selected service. Only services that you have selected

with the CC button are stored.

Examples:

In a case where there are two closed caption

services provided (for instance, Digital CC(ENG)

and CC1), and Digital CC(ENG) is displayed

as your current selection, if Digital CC(ENG) is

not broadcast for the next program, the other

closed caption service, CC1, will be displayed in

parentheses.

A closed caption service appears in parentheses

because the service you selected is not available

and a different service is displayed on your screen.

“1/1(CC1)” is displayed instead of “1/2/ENG”.

Not all programs and VHS videotapes offer closed

captions. Please look for the “

that captions will be shown.

” symbol to ensure

In the Closed Caption system, there can be more than

one caption service provided. Each is identiﬁed by its

own number. The “CC1” and “CC2” services display

subtitles of TV programs superimposed over the

program's picture.

In the Closed Caption system, the “Text1” or “Text2”

services display text that is unrelated to the program

being viewed (e.g., weather or news). These services

are also superimposed over the program currently

being viewed.

• When “Power Saving” is set to “Standard” or “Advanced”,

the Power Saving leaf icon appears on the channel

information window. See page 29 for details of Power

Saving settings.

• See page 31 for detailed closed caption settings.

• When the program contains no closed caption, “--”

displays in the closed caption information.

• If the language code, e.g. “ENG”, is not found on Digital TV

programs, “--” will be shown.

• Four kinds of closed caption service (CC1, CC2, Text1,

Text2) are potentially available, but a broadcast may

contain none or only some of these services at the

discretion of the program provider.

• When TV+Web is displayed, Closed Captions are not

available.

• You can have the same settings by choosing "Change CC"

on the menu items. (See page 30.)

Download from Www.Somanuals.com. All Manuals Search And Download.

Direct Button Operation

VIEW MODE

You can select the screen size.

Press VIEW MODE.

• The View Mode menu displays.

• The menu lists the View Mode options selectable for the type of video signal currently

being received.

Press VIEW MODE or

while the View Mode menu is displayed to select a

a b

desired item on the menu.

• You can sequentially select a View Mode that has its own aspect ratio.

•

You can have the same settings by choosing "View Mode" on the menu items. (See page 30.)

For HD programs

Stretch

■

Dot by Dot (Full Screen)

S.Stretch (Smart stretch)

Zoom

Suitable for viewing wide-

screen 1.78:1 aspect ratio

program, stretch mode will still signal and displays an image

Dot by Dot (1080i/p only):

Suitable for stretching 4:3

programs to ﬁll the screen.

Suitable for viewing wide-

screen 2.35:1 aspect-ratio

programs in full screen.

Detects the resolution of the

show very thin black bands

at the top and bottom of the

screen.

with the same number of

pixels on the screen.

Full Screen (720p only): You

can select "Full Screen" only

when receiving a 720p signal.

•

When using Dot by Dot or Full Screen, it is possible to see noise or bars around different outer portions of the screen. Please

change view mode to correct this.

For 4:3 programs

■

Example: Screen size images

Side Bar

S.Stretch (Smart stretch)

Zoom

Stretch

Suitable for viewing

conventional 4:3 programs in programs to ﬁll the screen.

their normal format.

Suitable for stretching 4:3

Suitable for viewing wide-

screen 2.35:1 anamorphic

DVDs in full screen.

This mode is useful for 1.78:1

DVDs. When viewing 1.85:1

DVDs, stretch mode will still show

very thin black bands at the top

and bottom of the screen.

For USB-Video, DLNA-Video or Internet applications

■

Example: Screen size images

Input signal

Auto

Original

Keeps the original

aspect ratio in a full

screen display.

Displays an image by

an original size.

Download from Www.Somanuals.com. All Manuals Search And Download.

On-Screen Display Menu

On-Screen Display Menu Operation

Example

LCFONT embedded

Example

System

Options

Initial

Setup

Picture

Settings

System

Options

Initial

Setup

Picture

Settings

Information

ENTER

RETURN

: Exit

: Select

: Enter

: Back

Picture Settings

ENTER

RETURN

: Select

: Enter

: Back

: Exit

Picture Settings

AV MODE (Changing Pic.Quality)

[STANDARD]

AV MODE (Changing Pic.Quality)

[STANDARD]

OPC

[On:Display]

Backlight

[

b5] a16

b16

b40

b30

b10

[

b5] a16

b16

b40

b30

b10

Contrast

[b30]

Brightness

[

0] a30

[

0] a30

Color

[

b2] a30

[

b2] a30

Tint

[

0] a30

[

0] a30

Sharpness

[

b2] a10

[

b2] a10

Advanced

Reset

Advanced

Reset

Guide display

• This indicates the buttons that can be operated on the

displayed screen. The guide display varies depending

on the menu setting screen.

Press MENU to display the MENU screen.

•

The operations for some selected items may be displayed

in the operational guide bar at the bottom of the screen.

Press

to select the desired menu.

to select a speciﬁc adjustment item,

c d

a b

Item displayed in blue

and then press ENTER.

• This indicates the item currently selected.

• Additional related adjustment items may be

•

Press ENTER to go to the adjustment screen for this item.

displayed. Press

to select the desired item.

a b

Item in brackets

• This indicates the current setting for the item.

Adjust the item while referring to the guide

display.

• Operations vary depending on the function or item.

Refer to the guide display corresponding to the

menu setting screen for button operations.

Item displayed in white

• This indicates that the item can be selected.

Item displayed in gray

• This indicates that the item cannot be selected.

There are various reasons why the items cannot be

selected, but the main reasons are as follows:

—Nothing is connected to the selected input terminal.

Press MENU to exit.

—

The function is not compatible with the current input signal.

• Menu options differ in the selected input modes, but the operating procedures are the same.

• The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly

from the actual screens.

• The order of explanations for each menu item in the following pages is not necessarily in accordance with the alignment of

the items on the screen.

LCFONT:

• This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly displaying easy-

to-read characters on LCD screens.

Menu Operation Buttons

Using the control panel of the main unit

You can also operate the menu with the control panel

of the main unit.

Using the remote control

Use the following buttons on the remote control to

operate the menu.

Button operations on the control panel correspond to

the ones on the remote control as shown below.

• For model LC-80LE633U, the control panel is located on

the left side of the TV as seen from the front.

MENU:

MENU on the

remote control.

INPUT:

ENTER on the

remote control.

MENU:

a b c d

Press to open or close the menu screen.

: Press to select a desired item on the screen or

adjust a selected item.

Press to go to the next step or complete the

setting.

: Cursor

on the remote

control.

U V

a b

ENTER:

VOL

: Cursor

on the remote

control.

k l

c d

RETURN: Press to return to the previous step.

Download from Www.Somanuals.com. All Manuals Search And Download.

On-Screen Display Menu

Menu Items

• When AV MODE is set to "AUTO", part of the menu may not be displayed correctly or the setting range of the menu may be

changed.

• Some menu items may not be displayed depending on the selected input source.

AQUOS LINK Setup ........................ Page 50

Input Terminal Setting......... Pages 30-31, 54

Audio Setup.......................... Page 30

PC input................................ Page 54

Audio Select.......................... Page 54

Input Skip.............................. Page 30

Input Label............................ Page 30

HDMI Setup.......................... Page 31

Output Select........................ Page 31

Color System ........................ Page 31

Menu Design................................... Page 31

Channel Selecting Effect ....... Page 31

Program Title Display ............ Page 31

Position................................. Page 31

Caption Setup....................... Page 31

Game Play Time.............................. Page 31

Operation Lock Out......................... Page 32

Icon Light Up Setting....................... Page 32

Demo Mode.................................... Page 32

Picture Settings

AV MODE (Changing Pic.Quality)..... Page 26

OPC................................................ Page 26

Backlight......................................... Page 26

Contrast.......................................... Page 26

Brightness....................................... Page 26

Color............................................... Page 26

Tint.................................................. Page 26

Sharpness....................................... Page 26

Advanced................................. Pages 26-27

C.M.S.-Hue........................... Page 26

C.M.S.-Saturation ................. Page 26

C.M.S.-Value......................... Page 26

Color Temp. ......................... Page 27

Motion Enhancement............ Page 27

Active Contrast ..................... Page 27

Gamma Adjustment .............. Page 27

Black Level............................ Page 27

Film Mode............................. Page 27

Digital Noise Reduction......... Page 27

Monochrome ........................ Page 27

Range of OPC....................... Page 27

Reset .............................................. Page 26

Initial Setup

EZ Setup......................................... Page 33

Language.............................. Page 33

Location & Time.................... Page 33

TV Location........................... Page 33

Antenna & Cable/STB ........... Page 33

Air/Cable............................... Page 33

CH Search............................ Page 33

Completed............................ Page 33

Broadcasting Setup.................. Pages 33-34

CH Setup.............................. Page 33

Favorite CH........................... Page 34

Antenna Setup-DIGITAL........ Page 34

Internet Setup .................... Pages 55, 58-59

Language........................................ Page 34

DivX^®Setup..................................... Page 46

Individual Setup........................ Pages 34-36

Secret No. ............................ Page 34

Parental CTRL................ Pages 34-36

Wall Mount Audio Setup.................. Page 34

FAV APP Key Assign....................... Page 34

Reset .............................................. Page 34

Audio Settings

Auto Volume ................................... Page 28

Treble.............................................. Page 28

Bass................................................ Page 28

Balance........................................... Page 28

Surround......................................... Page 28

Bass Enhancer................................ Page 28

Clear Voice...................................... Page 28

Reset .............................................. Page 28

Power Control

Audio Only ...................................... Page 29

Power Saving.................................. Page 29

No Signal Off................................... Page 29

No Operation Off............................. Page 29

System Options

View Option..............................Pages 30, 45

APPS.................................... Page 30

USB Operation Panel............ Page 45

Home Network (DLNA)

Information

Identiﬁcation.................................... Page 37

Digital Caption Info. ........................ Page 37

Software Update...................... Pages 37-39

Manual Update .............. Pages 37-39

Auto Update Setting.............. Page 37

Netﬂix Help...................................... Page 64

VUDU Help...................................... Page 64

Operation Panel .................... Page 45

View Mode............................ Page 30

Freeze................................... Page 30

Change Audio....................... Page 30

Change CC........................... Page 30

Download from Www.Somanuals.com. All Manuals Search And Download.

On-Screen Display Menu

AV MODE (Changing Pic.Quality)

Picture Settings

The audio and video settings can be changed to suit

the program or input content being watched.

Select from the following AV modes.

Adjusts the picture to your preference with the

following picture settings.

Example

When the input source is TV, COMPONENT,

VIDEO 1 or 2:

■

Picture

Settings

AUTO/STANDARD/MOVIE/GAME/USER/DYNAMIC/

DYNAMIC(Fixed)

Picture Settings

When the input source is PC IN or HDMI 1 to 4:

AUTO/STANDARD/MOVIE/GAME/PC/USER/DYNAMIC/

DYNAMIC(Fixed)

AV MODE (Changing Pic.Quality)

[STANDARD]

OPC

[On:Display]

Backlight

• The selectable items vary depending on the input source.

• You can select AV MODE by pressing AV MODE on the

remote control unit. See page 21 for details of AV MODE

settings.

[

b5] a16

b16

b40

b30

b10

Contrast

[b30]

Brightness

[

0] a30

Color

[

b2] a30

OPC Setting

Automatically adjusts the brightness of the screen.

Off: The brightness is ﬁxed at the value set in "Backlight".

On: Automatically adjusts.

Tint

[

0] a30

Sharpness

[

b2] a10

Advanced

Reset

On:Display: Displays the OPC effect on the screen while

adjusting the brightness of the screen.

• When set to "On", the Optical Picture Control (OPC)

senses the surrounding light and automatically adjusts

the backlight brightness. Make sure nothing obstructs

the OPC sensor, which could affect its ability to sense

surrounding light.

• When set to "On:Display", OPC effect displays on the

screen while the OPC adjusts the screen brightness.

Press MENU to display the MENU screen, and then

press

to select "Picture Settings".

c d

Press

to select a speciﬁc adjustment item.

a b

• Select "Advanced" and then press ENTER to set

"C.M.S.-Hue", "C.M.S.-Saturation", "C.M.S.-Value",

"Color Temp.", "Motion Enhancement", "Active

Contrast", "Gamma Adjustment", "Black Level", "Film

Mode", "Digital Noise Reduction", "Monochrome" or

"Range of OPC".

Press

(or

) to select the desired setting,

a b c d

and then press ENTER.

OPC:

Press MENU to exit.

OPC:

Selected item

button

Backlight

The screen dims

The screen

brightens

Advanced Picture Settings

This TV provides various advanced functions for

optimizing the picture quality.

Contrast

Brightness

For less contrast

For less

brightness

For less color

intensity

Skin tones

become reddish

For less

For more contrast

For more

brightness

For more color

intensity

Skin tones

become greenish

For more

sharpness

Color

C.M.S.

(Color Management System)

Tint

Color tone is managed using the six-color adjustment

setting.

Sharpness

C.M.S.-Hue: This is a standard to adjust the color either

more reddish or more bluish in tone.

sharpness

• For resetting all Picture adjustment items to the factory

preset values, press to select "Reset", press ENTER,

C.M.S.-Saturation: Increases or decreases the

saturation of a selected color.

C.M.S.-Value: A higher value makes the image brighter.

A lower value makes the image darker.

a b

press

to select "Yes", and then press ENTER.

a b

•

For resetting all adjustment items to the factory preset

values, press to select "Reset", and then press

a b

ENTER

Download from Www.Somanuals.com. All Manuals Search And Download.

On-Screen Display Menu

Color Temp.

Film Mode (3:2 pull-down)

(Color Temperature)

Automatically detects a ﬁlm-based source (originally

encoded at 24 frames/second), analyzes it then recreates

each still ﬁlm frame for high-deﬁnition picture quality.

Advanced: Adjust effect to reduce judder from ﬁlm

contents. Select a desired level of judder reduction

from 0 to +10.

For a better white balance, use color temperature correction.

High:

White with bluish tone

Mid-High:

Middle:

Mid-Low:

Low:

White with reddish tone

Standard: Detects, analyzes, converts ﬁlm source.

Off: Normal viewing mode.

White balance can be adjusted between a maximum of

+30 and a minimum of –30 for each color temperature.

R Gain (LO/HI): –30 through +30

• "Film Mode" does not function depending on input signal

type.

• "Film Mode" does not function when you set AV MODE to

"GAME" or “PC”.

G Gain (LO/HI): –30 through +30

B Gain (LO/HI): –30 through +30

• "Standard" does not function when channel display shows

an input signal resolution of 480p, 720p, or 1080p.

•

For resetting all adjustment items to the factory preset

values, press to select "Reset", and then press

a b

ENTER

Digital Noise Reduction

Produces a clearer video image.

Auto: Automatically adjusts the level of noise reduction.

High/Middle/Low: Select a desired level for viewing a

clearer video image.

Motion Enhancement

Use Motion Enhancement to view fast-action video

more clearly.

Off: No adjustment.

LC-70LE640U/LC-60LE640U/LC-52LE640U

120Hz High/120Hz Low: For obtaining a clearer image.

Off: Normal image.

■

• "Digital Noise Reduction" is not available when you set AV

MODE to "PC" or PC format is being input.

• When AV MODE is set to "GAME", "Auto" is not available.

LC-80LE633U/LC-70C6400U/LC-60C6400U/

LC-52C6400U

AquoMotion240: Turns the LED backlight on or off to

display motion picture more smoothly and clearly.

120Hz High/120Hz Low: For obtaining a clearer image.

Off: Normal image.

■

Monochrome

For viewing a video in monochrome.

On: For viewing in monochrome.

Off: Normal color.

Range of OPC

• "Motion Enhancement" may cause image noise. If this

occurs, turn the function "Off".

The brightness level range of the OPC sensor's automatic

adjustments can be set according to your preferences.

The adjustment range of the OPC sensor can be set to

a maximum of +16 and a minimum of –16.

Max.: –15 through +16

• When AV MODE is set to "GAME" or "PC", or PC format is

being input, "Motion Enhancement" is not available.

Active Contrast

Automatically adjusts the image contrast according to

the scene.

Min.: –16 through +15

On: Automatically adjusts the image contrast.

Off: No adjustment.

• The "Range of OPC" settings are active only when "OPC"

is set to "On".

• The maximum setting cannot be set to a smaller number

than the minimum setting.

• The minimum setting cannot be set to a bigger number

than the maximum setting.

• Depending on the brightness of the surrounding light, the

OPC sensor might not operate if the adjustment range is

small.

Gamma Adjustment

Adjusts the differences of picture tones between bright

parts and dark parts. The adjustment range of the

gamma can be set to a maximum of +2 and a minimum

of –2 by pressing or

Black Level

Adjusts on-screen black level to your preferred level.

High: The black level gets brighter.

Low: The black level gets darker.

• "Black Level" is available for input signal from Composite

Video, Component 480i and analog broadcasts (air and

cable).

Download from Www.Somanuals.com. All Manuals Search And Download.

On-Screen Display Menu

Auto Volume

Audio Settings

Different sound sources sometimes do not have the

same loudness level, such as a program and its

commercial breaks. The Automatic Volume Control

(Auto Volume) reduces this problem by equalizing

levels.

You can adjust the sound quality to your preference

with the following settings.

Example

Audio

Settings

High: Reducing the loudness gaps among different

sound sources strongly.

Audio Settings

Middle:

Auto Volume

[Off]

Low: Reducing the loudness gaps among different

Treble

sound sources slightly.

[

0] a15

b15

Bass

[

0] a15

• Audio Settings menu is grayed out when “Output Select” is

set to “Variable”. (See page 31.)

Balance

[

Surround

[Off]

[On]

[Off]

Bass Enhancer

Clear Voice

Reset

The surround function produces Surround effect from

the speakers.

On: Makes it possible to enjoy natural, realistic surround

sound.

Off: Outputs the normal sound.

Press MENU to display the MENU screen, and then

• Audio Settings menu is grayed out when "Output Select" is

set to "Variable". (See page 31.)

• For some discs, setup may be required on your BD/DVD

player. In this case, please refer to the operation manual of

your BD/DVD player.

press

Press

to select "Audio Settings".

c d

to select a speciﬁc adjustment item.

a b

• Select “Auto Volume”, "Surround", "Bass Enhancer" or

"Clear Voice", and then press ENTER to set each item.

Press

(or

) to select the desired setting,

a b

c d

Bass Enhancer

and then press ENTER.

This function allows you to enjoy bass-enhanced sound.

Press MENU to exit.

On: Bass Enhancer function is on.

Off: Normal sound.

Selected item

button

Treble

Bass

For weaker treble

For weaker bass

For stronger treble

For stronger bass

• Audio Settings menu is grayed out when "Output Select" is

set to "Variable". (See page 31.)

Balance

Decrease audio

from the right

speaker

Decrease audio

from the left

speaker

Clear Voice

This function emphasizes speech against background

noise for greater clarity.

• Audio menu is grayed out when "Output Select" is set to

"Variable". (See page 31.)

• Audio Settings menu is grayed out when "Output Select" is

set to "Variable". (See page 31.)

• For resetting Audio adjustment items to the factory preset

values, press

to select "Reset", press ENTER, press

a b

to select "Yes", and then press ENTER.

a b

Download from Www.Somanuals.com. All Manuals Search And Download.

On-Screen Display Menu

Power Saving

Power Control

This function allows you to set the Power Saving level

Power control setting allows you to save energy.

in order to decrease the power consumption and

increase the backlight lifespan.

Standard: Optimizes power reduction based upon video

Example

content. When set to "Standard", " " appears on the

screen.

Advanced: Optimizes power reduction based upon video

content and engages OPC. When set to "Advanced",

Power

Control

Power Control

" appears on the screen.

Off: This function does not work.

Audio Only

Power Saving

No Signal Off

No Operation Off

[

Standard]

[Enable]

• "Power Saving" does not function when you set AV MODE

to "AUTO" or "DYNAMIC (Fixed)".

• You cannot select a different Power Saving item for each

AV MODE.

[Disable]

When "Power Saving" is set, the "OPC" settings for all AV

Modes will automatically change.

Press MENU to display the MENU screen, and then

—If you set "OPC" to "On" when "Power Saving" is set to

"Standard", then the "Power Saving" setting will change

to "Advanced".

press

Press

to select "Power Control".

c d

to select a speciﬁc adjustment item,

a b

—When you change the "Power Saving" setting from

"Advanced" to "Off" or to "Standard", "OPC" will be set

to "Off".

and then press ENTER.

Press

(or

) to select the desired setting,

a b

c d

—"AUTO" and "DYNAMIC (Fixed)" will remain set to "Off".

• When "Power Saving" is set to "Standard" or "Advanced",

the Power Saving leaf icon appears to the left of "OPC" in

the Picture Settings menu screen.

and then press ENTER.

Press MENU to exit.

• Skip this step for "Audio Only".

No Signal Off

Audio Only

This function allows the TV to automatically shut the

power down when there is no signal received.

Enable: The power will automatically shut down if there is

no signal for 15 minutes.

When listening to music from a music program, you

can turn the screen off and enjoy audio only.

On: Audio is output without screen image.

Off: Both screen images and audio are output.

Disable: This function does not work.

A conﬁrmation screen appears.

Yes: The setting will be changed.

No: The setting will not be changed.

• The screen image will return to normal when a button

(except those for audio adjustment, such as VOL, MUTE)

is pressed.

• When it is 5 minutes before the power shuts down, the

remaining time will start to keep appearing every minute.

•

When a TV program ﬁnishes, this function may not operate.

No Operation Off

This function allows the TV to automatically shut the

power down when there is no operation.

Enable: The power will automatically shut down if there is

no operation for 3 hours.

Disable: This function does not work.

A conﬁrmation screen appears.

Yes: The setting will be changed.

No: The setting will not be changed.

• When it is 5 minutes before the power shuts down, the

remaining time will start to keep appearing every minute.

Download from Www.Somanuals.com. All Manuals Search And Download.

On-Screen Display Menu

Freeze

System Options

Allows you to capture and freeze a moving image that

you are watching.

Example

System

Options

• You can select Freeze by pressing FREEZE on the remote

control unit. See page 20 for details of Freeze function.

System Options

View Option

Change Audio

Allows you to change the audio when multiple audio is

available for the program you are watching.

AQUOS LINK Setup

Input Terminal Setting

Menu Design

• You can change Audio by pressing AUDIO on the remote

control unit. See pages 21 to 22 for details of Audio

function.

Operation Lock Out

Icon Light Up Setting

Demo Mode

[Off]

[On]

Change CC

Allows you to change the Closed Caption display.

Select "Change CC" on the menu to display the Closed

Caption information.

• The information displayed varies depending on the program

you are watching.

• You can change Closed Caption by pressing CC on the

remote control unit. See page 22 for details of Closed

Caption function.

Input Terminal Setting

Audio Setup

You can output digital audio to an AV ampliﬁer or

similar device whose DIGITAL AUDIO INPUT terminal

is connected to the DIGITAL AUDIO OUTPUT terminal

on the TV. Please select an audio output format

compatible with the audio format of the program you

are watching and the equipment connected.

PCM: The optical output terminal outputs audio signal

in PCM form. If your digital audio system does not

support Dolby Digital, select "PCM".

Press MENU to display the MENU screen, and then

press

Press

to select "System Options".

c d

to select a speciﬁc adjustment item and

a b

then press ENTER.

Press

(or

) to select the desired setting,

a b c d

and then press ENTER.

Press MENU to exit.

Dolby Digital: The optical output terminal outputs audio

signal in Dolby Digital form. It reproduces sound from

surround program of digital.

View Option

These functions are useful for adjusting the audio

and video settings. The View Option functions can be

operated with the remote control unit.

Input Skip

This setting allows you to skip the TV, HDMI or PC IN

Input ("TV", "PC IN", "HDMI 1", "HDMI 2", "HDMI 3"

and "HDMI 4") on the Input Selection operation.

Yes: Skips the input.

APPS

The application window can be displayed by selecting

"APPS" on the MENU screen.

No: Does not skip input.

• You can display the application window by pressing

Input Label

SmartCentral on the remote control unit. (See page 21.)

Lets you set the input terminal displayed when using

View Mode

the INPUT list or channel display. Press

a b c d

This function changes the screen size.

Select "View Option" on the menu to display the View

Mode menu screen.

select the new name for the input mode.

• Using the software keyboard, you can enter up to

10 characters for text. (See page 60.)

The View Mode menu varies depending on the input source.

• You cannot change labels if the input source is TV, Home

Network (DLNA) or USB.

• You can select View Mode by pressing VIEW MODE on

the remote control unit.

—See page 23 for adjusting the video being input from a

TV, other audiovisual equipment, USB-Video, DLNA-

Video or Internet applications.

—

See page 53 for adjusting the video being input from a PC.

Download from Www.Somanuals.com. All Manuals Search And Download.

On-Screen Display Menu

HDMI Setup

Position

To watch an HDMI or PC IN equipment image, select

"HDMI 1", "HDMI 2", "HDMI 3" or "HDMI 4" from the

INPUT list using INPUT on the remote control unit or

on the TV.

For adjusting a picture's horizontal and vertical

position.

H-Pos.: Centers the image by moving it to the left or

right.

V-Pos.: Centers the image by moving it up or down.

Auto View:

Enable: To use View Mode based on signal

recognition, including an HDMI signal.

Disable: No function.

• For resetting adjustments to the factory preset values,

press

to select "Reset", and then press ENTER.

a b

• When connecting a PC to the HDMI terminal, the image

position will be automatically adjusted. It cannot be

manually adjusted.

• The screen position variable ranges depend on the View

Mode or the signal type. The ranges can be seen on the

position-setting screen.

• Adjustments are stored separately according to input

source.

• "Position" does not work when USB mode, Home Network

(DLNA) mode or an Internet application is used.

• Refer to your external equipment operation manual for the

signal type.

• When connecting a DVI-HDMI conversion adapter/cable to

the HDMI terminal, the image may not come in clearly.

Output Select

Allows you to select what controls the audio output.

Fixed: Sound via speaker is adjusted with VOL

k l

the remote control unit or on the TV.

Sound via the AUDIO OUT terminal is not adjustable

and outputs at a consistent level.

Variable: Sound via the AUDIO OUT terminal is adjusted

Caption Setup

This function allows you to adjust the closed caption

screen appearance to suit your preference. You can

adjust 7 items: "Caption Size", "Font Style", "Foreground

Color", "Foreground Opacity", "Background Color",

"Background Opacity" and "Character Edge".

with VOL

on the remote control unit or on the TV.

k l

Sound via speaker is muted.

Color System

Example:

Select the video signal system compatible with your

equipment from the list below:

Selectable items available for "Font Style".

Default: The font speciﬁed by broadcasting station or

default font.

Auto/NTSC/PAL-M/PAL-N

Type 0: Proportional font used in the MENU screen.

Type 1: Monospaced with serifs.

Type 2: Proportionally spaced with serifs.

Type 3: Monospaced without serifs.

Type 4: Proportionally spaced without serifs.

Type 5: Casual font type.

• "Color System" can only be set for the VIDEO 1 or 2.

• If you have already set the Secret No., input the 4-digit

secret number here. See page 34 for setting a secret

number.

Type 6: Cursive font type.

Type 7: Small capitals.

Menu Design

Channel Selecting Effect

• For resetting adjustments to the factory preset values,

press

to select "Reset", and then press ENTER.

a b

You can select whether to use transition effects when

changing channels.

• The default value depends on the broadcasting station.

Yes: A transition effect is used when the channel is

changed.

Game Play Time

This function displays the elapsed game time so you

do not lose track of the time. To display the elapsed

time, select "GAME" for the AV MODE before starting

the game.

No: No function.

• In some cases, "Channel Selecting Effect" does not work.

On: The elapsed time is displayed every 30 minutes when

you switch to GAME mode in external input mode.

Off: No adjustment.

Program Title Display

Select the CH display when changing channels for

digital broadcasting.

Yes: "Program Info." displays.

No: "Program Info." does not display.

Download from Www.Somanuals.com. All Manuals Search And Download.

On-Screen Display Menu

Operation Lock Out

Demo Mode

This function locks the operation buttons on the TV

and the remote control.

You can select the image from several types of demo

mode.

Off: No adjustment.

LC-70LE640U/LC-60LE640U/LC-52LE640U

SmartCentral/Feature Demo/Auto Play

■

RC Control Lock: All buttons on the remote control are

locked.

Button Control Lock: All buttons on the TV, except

POWER, are locked.

LC-80LE633U/LC-70C6400U/LC-60C6400U/

LC-52C6400U

■

AquoMotion240/SmartCentral/Feature Demo/

Auto Play

When “RC Control Lock” or “Button Control Lock” is

selected, a conﬁrmation screen appears.

Yes: Locks the operation buttons.

No: No adjustment.

If you have selected "Auto Play", you need to select

the desired playback type(s), and then set the playback

time.

Continuous: Play Demos continuously.

10 min.: Play Demos every 10 minutes.

20 min.: Play Demos every 20 minutes.

• To unlock the buttons on the remote control by using the

control panel of the main unit (see page 24):

Press MENU to display the MENU screen,

press VOL

to select "System Options", and then

k l

press INPUT.

U V

Press CH

to select "Operation Lock Out", and

• This function will be canceled when you press EXIT on the

remote control unit.

• When "Demo Mode" is set to "SmartCentral" or "Feature

Demo", pressing FREEZE pauses/restarts demo.

• "Demo Mode" may not be selected depending on input

signal type or application status.

then press INPUT.

U V

Press CH

to select "Off", and then press INPUT.

Press MENU to exit.

• To unlock the buttons on the TV, press MENU on the

remote control, and then select "Off" in "Operation Lock

Out".

• "Demo Mode" may be automatically canceled depending

on input signal type.

Icon Light Up Setting

When this function is set to "On", the LED on the front

of the TV turns on.

• "On" is the factory preset value. If you want to turn off the

LED, set the function to "Off".

Download from Www.Somanuals.com. All Manuals Search And Download.

On-Screen Display Menu

Antenna & Cable/STB: Select the type of connection

you will use to watch TV.

Initial Setup

Air/Cable: Make sure what kind of connection is made

with your TV when selecting "Air" or "Cable".

CH Search: Channel auto search makes the TV look for

all channels viewable in the set area.

Example

Initial

Setup

• If "Cable" is selected for Antenna setting, scrambled

channels are removed after the Channel search has been

completed.

Completed: The settings conﬁrmation screen is displayed.

Conﬁrm the information displayed on the screen.

Initial Setup

EZ Setup

Broadcasting Setup

Internet Setup

Language

•

See Initial Installation on pages 17 to 19 for setting each item.

• If no channel is found, conﬁrm the type of connection

made with your TV and try "EZ Setup" again.

• If you select "Analog Search Start" and initiate the channel

search, the CH Memory for Cable Digital will be deleted.

[English]

DivX^®Setup

Individual Setup

Broadcasting Setup

CH Setup

Wall Mount Audio Setup

[No]

FAV APP Key Assign

Reset

If Initial Installation does not memorize all the channels

in your region, follow the instructions below to manually

memorize the channels.

Press MENU to display the MENU screen, and then

Air/Cable: Make sure what kind of connection is made

with your TV when selecting "Air" or "Cable".

CH Search: Channel auto search makes the TV look for

all channels viewable in the set area.

press

Press

to select "Initial Setup".

c d

to select a speciﬁc adjustment item,

a b

and then press ENTER.

CH Memory: You can select the channels to skip in each

ANALOG (Air), ANALOG (Cable), DIGITAL (Air) and

DIGITAL (Cable).

• When you select "EZ Setup", "CH Setup", "Parental

CTRL" or "Reset", you can enter the 4-digit secret

number here. See page 34 for setting a secret number.

On: Skips channels. (Channel selection disabled using CH

Press

(or

) to select the desired setting,

a b

c d

U V

and then press ENTER.

Off: Does not skip channels. (Channel selection enabled using

CH .)

U V

Press MENU to exit.

Remove Scrambled CH: This function makes the TV

look for and then delete digital cable channels that

are scrambled and so unavailable in the set area. The

process may take more than 20 minutes.

Yes: Starts to remove scrambled channels.

EZ Setup

You can run EZ Setup again, even after setting up the

preset channels.

Language: Select from among 3 languages (English,

French and Spanish).

No: This function does not work.

Location & Time: Make settings for the country, area

and time zone where you use the TV.

•

See Initial Installation on pages 17 to 19 for setting each item.

• If no channel is found, conﬁrm the type of connection

made with your TV and try channel search again.

Select your country: Select either "United States", "Canada",

or "Mexico".

• If you select "Analog Search Start" and initiate the channel

search, the CH Memory for Cable Digital will be deleted.

Select your time zone: Select your time zone. The available

settings differ depending on the selected country.

Select DST (Daylight Savings Time): Select "Auto", "Manual"

or "Off".

TV Location: Select "Home" or "Store" for the location

where you plan to install the TV. This product qualiﬁes

for ENERGY STAR in Home mode default setting.

Home: "Power Saving" is set to "Advanced", and AV MODE is

set to "STANDARD".

Store: "Power Saving" is set to "Off" and AV MODE is set to

"DYNAMIC (Fixed)". Picture Reset and Feature Demo can be set.

Picture Reset: AV MODE will be set to "DYNAMIC (Fixed)"

regardless of whether Picture Reset is "On" or "Off". If you

select "On", AV MODE will be reset to "DYNAMIC (Fixed)"

if there is no operation for 30 minutes. When "Off" is

selected, AV MODE will be set to "DYNAMIC (Fixed)".

Feature Demo: When "On" is selected, after all the settings

are completed, the Feature Demo screen is displayed if

there is no operation for several minutes.

• ENERGY STAR qualiﬁcation is based on AV MODE

"STANDARD".

Download from Www.Somanuals.com. All Manuals Search And Download.

On-Screen Display Menu

Favorite CH (Favorite Channel Setting)

Reset

This function allows you to program 4 favorite

channels, in 4 different categories. By setting the

favorite channels in advance, you can select your

favorite channels easily.

If complex adjustments are made and the settings

cannot be restored to normal, you can reset the

settings to the factory preset values.

• If you have already set the Secret No., input the 4-digit

secret number here.

To register your favorite channel:

Select "Register" and then press ENTER. Press

a b c

to select the position in the category, and then press

• The Channel Setup settings will not be changed.

• The Language settings will not be changed.

• The Secret number settings will not be changed.

• The TV Location settings will not be changed.

ENTER to register.

To delete your favorite channel:

Select "1 Data Clear" and then press ENTER. Press

to select the channel you want to delete, and

a b c d

Individual Setup

Secret No.

then press ENTER. Select "Yes" and then press ENTER.

To delete all the favorite channels, select "All Data Clear".

Allows you to use a secret number to protect certain

settings from being accidentally changed.

• Before setting the channel, select the channel you want to

• You can display the Favorite CH screen by pressing

IMPORTANT:

FAVORITE CH on the remote control.

Three conditions must be met to enable the V-Chip (see

pages 35 to 36):

Antenna Setup-DIGITAL

In order to receive digital air broadcasts, you need

a digital broadcast antenna. You can conﬁrm the

antenna conﬁguration through the "Antenna Setup-

DIGITAL" screen. If necessary, adjust the direction of

the antenna to obtain the maximum signal strength.

Signal Strength: The signal strength of DIGITAL channel

is displayed. The signal information is based on the

current channel.

1. Secret No. is registered.

2. V-Chip/V-Chip (DTV Only) settings have been made.

• The “V-Chip (DTV Only)” will only be selectable when a new

rating system can be downloaded via digital broadcasting in the

U.S.

"Status

is set to

"On".

Setting the Secret No.

■

Channel Strength: Input the 2-digit channel number

to check the signal strength of the selected channel.

Make sure the signal is strong enough for each

channel.

You can set and change the secret number by using

0-9.

Yes: Changes or sets the Secret No.

No: The conﬁrmation screen to clear the Secret No.

appears when the Secret No. has been set. When the

Secret No. has not been set, the previous screen will

be displayed.

• This function is available for DIGITAL (Air) only.

Language

You can also select a language from the Initial Setup

menu. Select from among 3 languages: English,

French and Spanish.

Secret No. Clear

■

You can clear your secret number.

Yes: Your secret number is cleared.

No: Your secret number is not cleared.

Wall Mount Audio Setup

This selects the optimal audio for the program you are

currently watching even when the TV is mounted to a

wall.

• As a precautionary measure, make a note of your secret

number and keep it in a familiar place.

• If the secret number is cleared, the Status setting

automatically sets to "Off". "V-Chip" and "Status" will not

be selectable from the menu.

Yes: Selects the optimal audio.

No: No adjustment.

FAV APP Key Assign

You can assign your favorite applications to the FAV

APP 1, 2, and 3 buttons on the remote control. After

assigning an application to a button, you can press

that button to display the top screen of the assigned

application.

Parental CTRL

(Parental Control Setting)

Status

Used to enable or disable the parental control function.

This function will not be selectable from the menu if

you do not ﬁrst conﬁgure your secret number.

On: Enables Parental CTRL.

Current Setup: Checks the current setting.

APP1/APP2/APP3: You can assign your favorite

applications displayed on the screen to these buttons.

Off: Disables Parental CTRL.

• For resetting adjustments to the factory preset values,

press

to select "Reset", and then press ENTER.

a b

Download from Www.Somanuals.com. All Manuals Search And Download.

On-Screen Display Menu

V-Chip

TV Parental Guidelines

Example

■

V-CHIP is an electronic ﬁltering device built into your

TV. This tool gives parents a great degree of control

over broadcasts accessed by their children. It allows

parents to select programs judged suitable for child

viewing while blocking ones judged not suitable. It

does so automatically once you activate the V-CHIP

feature in your TV. "V-Chip" and "Status" will not be

selectable from the menu if you do not ﬁrst conﬁgure

your secret number.

MPAA

TV Guidelines

TV-Y

Can. English Ratings

Can. French Ratings

TV-Y7

TV-G

TV-PG

TV-14

TV-MA

NONE

• The U.S. has two rating systems for viewing content: TV

Parental Guidelines and movie ratings.

• The TV Parental Guidelines work in conjunction with the

V-CHIP to help parents screen out inappropriate television

shows from their children.

• Movie ratings are used for original movies rated by the

Motion Picture Association of America (MPAA) as watched

on cable TV and not edited for television. The V-CHIP can

also be set to block MPAA-rated movies.

Press

to adjust the item to your desired position.

a b

" " indicates the item is blocked. Press MENU to exit.

Suggested age

TV-Y: All children.

TV-Y7: Directed to older children.

TV-G: General audience.

TV-PG: Parental Guidance suggested.

TV-14: Parents strongly cautioned.

TV-MA: Mature audience only.

• The setting automatically enters "Block" for any ratings

below your selection.

• If Status is not set to "On", the conﬁguration settings will

not work.

Example

MPAA

TV Guidelines

TV-Y

MPAA (Voluntary movie rating system)

Example

■

Can. English Ratings

Can. French Ratings

TV-Y7

TV-G

MPAA

TV-PG

TV-14

TV-MA

NONE

TV Guidelines

Can. English Ratings

Can. French Ratings

PG-13

NC-17

When setting an individual content-based rating item:

Press

or ENTER to access blocked content

NONE

items from the currently selected age-based rating

item.

Press

to adjust the item to your desired position.

" " indicates the item is blocked. Press MENU to exit.

a b

Press

to select an individual item, and then

a b

press ENTER to unblock it (" " is removed). Repeat

G: General audiences. All ages admitted.

PG: Parental guidance suggested. Some material may not be

suitable for children.

PG-13: Parents strongly cautioned. Some material may be

inappropriate for children under 13.

R: Restricted. Under 17 requires accompanying parent or

adult guardian (age varies in some jurisdictions).

NC-17: No one 17 and under admitted.

the same steps for the other items.

Press

or RETURN to register after all individual

content rating items are set.

Content

FV: Fantasy violence.

V: Violence.

S: Sexual situation.

L: Adult language.

D: Sexually suggestive dialog.

X: X is an older rating that is uniﬁed with NC-17 but may be

encoded in the data of older movies.

• Voluntary movie rating system only uses an age-based

rating.

Content

Rating

TV-Y

TV-Y7

TV-G

Suggested

age

TV-PG

TV-14

TV-MA

: The content rating can be set, but this rating is not

normally broadcast by TV stations.

: Content rating can be set.

Download from Www.Somanuals.com. All Manuals Search And Download.

On-Screen Display Menu

Canadian Rating Systems (Canadian English ratings

and Canadian French ratings)

• The TV rating systems in Canada are based on the

Canadian Radio-Television and Telecommunications

Commission (CRTC) policy on violence in television

programming.

• While violence is the most important content element to

be rated, the structure developed takes into consideration

other program content like language, nudity, sexuality and

mature themes.

Canadian French Ratings

Example

■

MPAA

TV Guidelines

Can. English Ratings

Can. French Ratings

8ans+

13ans+

16ans+

18ans+

NONE

• When setting the V-CHIP on the Canadian system you

can choose either the Canadian English ratings or the

Canadian French ratings.

Press

to adjust the item to your desired position.

" " indicates the item is blocked. Press MENU to exit.

a b

Canadian English Ratings

Example

■

E: Exempt programming.

G: General: All ages and children, contains minimal direct

violence, but may be integrated into the plot in a humorous

or unrealistic manner.

8ans+: General but inadvisable for young children: May

be viewed by a wide public audience, but could contain

scenes disturbing to children under 8 who cannot

distinguish between imaginary and real situations.

Recommended for viewing with parent.

13ans+: Over 13 years: Could contain scenes of frequent

violent scenes and therefore recommended for viewing with

parent.

16ans+: Over 16 years: Could contain frequent violent scenes

and intense violence.

MPAA

TV Guidelines

Can. English Ratings

Can. French Ratings

C8+

14+

18+

NONE

Press

to adjust the item to your desired position.

a b

" " indicates the item is blocked. Press MENU to exit.

18ans+: Over 18 years: Only for adult viewing. Could contain

frequent violent scenes and extreme violence.

E: Exempt: Includes news, sports, documentaries and other

information programming; talk shows, music videos, and

variety programming.

C: Children: Intended for younger children under the age of 8

years. Pays careful attention to themes that could threaten

their sense of security and well-being.

C8+: Children over 8 years old: Contains no portrayal

of violence as the preferred, acceptable, or only way

to resolve conﬂict; nor encourage children to imitate

dangerous acts which they may see on the screen.

G: General: Considered acceptable for all age groups.

Appropriate viewing for the entire family, contains very little

violence, physical, verbal or emotional.

How to temporarily release the V-CHIP BLOCK

■

When the V-CHIP BLOCK is working and censors a

broadcast, "V-CHIP HAS BEEN ACTIVATED." displays.

Press ENTER while the V-CHIP is working, and

then the secret number setting menu displays.

Input the 4-digit secret number by using 0–9. At this

time V-CHIP BLOCK temporarily releases.

PG: Parental Guidance: Intended for a general audience, but

may not be suitable for younger children (under the age of 8)

because it could contain controversial themes or issues.

14+: Over 14 years: Could contain themes where violence

is one of the dominant elements of the storyline, but it

must be integral to the development of plot or character.

Language usage could be profane and nudity present

within the context of the theme.

18+: Adults: Intended for viewers 18 years and older and

might contain depictions of violence, which while related to

the development of plot, character or themes, are intended

for adult viewing. Could contain graphic language and

portrayals of sex and nudity.

Reactivating the temporarily released V-CHIP

BLOCK

■

You can reactivate the temporarily released V-CHIP

BLOCK as shown below.

• Select "Status" setting from the Parental CTRL menu to

reactivate BLOCK. (See page 34.)

• Select "V-Chip" setting ("MPAA", "TV Guidelines", "Can.

English Ratings" or "Can. French Ratings") from the

Parental CTRL to reactivate BLOCK. (See pages 35 to 36.)

• Switch off the TV power.

• Performing any of the three above will activate the V-CHIP

BLOCK.

Download from Www.Somanuals.com. All Manuals Search And Download.

On-Screen Display Menu

Press

to select “Software Update”, and then

a b

Information

press ENTER.

• If you have already set the Secret No., go to step 3.

Example

Information

Identiﬁcation

Digital Caption Info.

Software Update

Netﬂix Help

Digital Caption Info.

Software Update

VUDU Help

Input the 4-digit secret number by using 0-9.

Press MENU to display the MENU screen, and then

press

Press

to select "Information".

c d

Software Update

Enter your Secret No.

to select a speciﬁc adjustment item,

a b

and then press ENTER.

Press

(or

) to select the desired setting,

a b

c d

and then press ENTER.

Press

to select “Manual Update” or “Auto

a b

Press MENU to exit.

Update Setting”, and then press ENTER.

Identiﬁcation

• The operations thereafter vary depending on the setting.

The current version of the TV software is displayed.

Manual Update

Digital Caption Info.

Select the method for manually updating the software.

USB Update: Updates the software using a USB memory

device containing the update ﬁle. (See pages 38 to 39.)

Network Update: Downloads the update ﬁle via the

network and then updates the software. (See page 38.)

(Digital Caption Information)

This function allows viewing of digital closed caption

information for the digital broadcast program being viewed.

• This list is not displayed for analog broadcasts or external

input audio/video.

• A broadband connection and Internet Setup are required to

update the software using the network. (See pages 57 to

59.)

• This information is not included in CC1, CC2, Text1, or

Text2, and is not displayed in a list.

• It may take time to access and download the update

Software Update

This is used to upgrade the system software to

enhance the TV functions.

depending on the Internet connection and other factors.

Auto Update Setting

When the TV is on, or when an Internet application

is being accessed, this function enables the TV

to connect to the network and check for updates

automatically.

Yes: Enables Auto Update Setting.

No: Disables Auto Update Setting.

When an update is available, a message is displayed.

c d

to select "Yes", and then press ENTER to

Press

Press MENU to display MENU screen, and then

display the download screen. (See page 38.)

press

to select “Information”.

c d

Yes

• This function does not work when a broadband connection

or Internet Setup is not available.

• A message may also be displayed when an application is

running.

The message varies depending on the application.

Download from Www.Somanuals.com. All Manuals Search And Download.

On-Screen Display Menu

Updating the Software via the Network

■

CAUTION

Press

on the Manual Update screen to select

a b

• Do not unplug the AC cord while the software is

being updated.

"Network Update", and then press ENTER.

•

The TV connects to the network and checks for updates.

• To cancel, press ENTER.

When the software is successfully updated, a

screen is displayed indicating that the update

process is completed.

Connecting to Internet..

Checking for the latest software version..

A screen indicating that the update is completed

is displayed. 4 seconds later, the TV restarts

automatically.

Accessing..

Abort

Software update is complete.

The current version of the TV and the latest version

of software are displayed. To update the TV

software, select “Yes”, and then press ENTER.

Update Version

XXXXXXXX

• If the software was not updated successfully, check the

broadband connection and Internet Setup, and then try

updating the software again.

Latest software version has been found.

A software update is available.

Proceed with update?

Current Version

XXXXXXXX

Failed to complete update.

Please retry from Software Update menu.

Latest Version

XXXXXXXX

Estimated Update Time

Update time may change depending on the network environment

Yes

Updating the Software with a USB Memory Device

■

To check for the availability of a software update, visit

http://www.sharpusa.com/products/support/. If you

have any questions, please

• When a server connection cannot be established or an

update is not available, a message is displayed.

If a server connection cannot be established, check the

broadband connection and Internet Setup.

call 1-800-BE-SHARP (800-237-4277).

CAUTION

Cannot reach the server.

Check the network settings and try again.

• Do not remove the USB memory device or unplug

the AC cord while the software is being updated.

• Be sure to properly follow the whole procedure

described below, step by step. Otherwise, for

example, the TV cannot read the data in the USB

memory device and software updating will fail.

Insert the USB memory device with the update ﬁle

into the USB 1 or USB 2 terminal on the TV.

The TV does not need to be updated.

• When you update the software, use only one USB

terminal. Either USB 1 or USB 2 is usable.

After the update ﬁle is downloaded, the software

update process begins.

Downloading the latest software..

Update Version

XXXXXXXX

30%

Abort

Updating to the latest software..

Update Version

XXXXXXXX

50%

Remote control operation is disabled during update process.

Press

on the Manual Update screen to select

Do not unplug AC cord.

"USB Update", and then press ENTER.

Download from Www.Somanuals.com. All Manuals Search And Download.

On-Screen Display Menu

Press ENTER to start checking the data in the USB

memory device.

To update the TV software with the update ﬁle,

select “Yes”, and then press ENTER.

Software update ﬁle is detected

in the USB memory device.

Start update?

Insert the USB memory device

containing the software update ﬁle.

Current Version

Update Version

UXXXXXX1

UXXXXXX2

Yes

During the data checking, “Checking” blinks.

Now checking the data

in the USB memory device.

Example

Now updating

Update Version

UXXXXXX2

Checking

30%

Remote Control operation is disabled during Update process.

Do not unplug AC cord.

• The current version of the TV software and the version

of the update ﬁle on the USB memory device are

displayed.

CAUTION

Example

• Do not remove the USB memory device or unplug

the AC cord while the software is being updated.

Software update ﬁle is detected

in the USB memory device.

Start update?

When the software is successfully updated, a

screen is displayed indicating that the update

process is completed.

Current Version

Update Version

UXXXXXX1

UXXXXXX2

After this screen is displayed, the TV automatically

turns off and then turns on again.

Yes

Example

• If the USB memory device is not properly installed or

the correct update ﬁle cannot be found on the USB

memory device, an error message is displayed.

Check the ﬁle on the USB memory device, and then

reinsert the USB memory device correctly.

Software update is complete.

Update Version

UXXXXXX2

Software update ﬁle is not detected in the USB memory device.

Conﬁrm that you have transferred the ﬁle

to the USB memory device and retry software update.

• If the update has failed, check the ﬁle in the USB

memory device and try Software Update again.

Failed to complete update.

Retry Software Update.

If system Update fails again,

contact the customer service center.

There is more than one software ﬁle in the USB memory device.

Conﬁrm that only the software update ﬁle is

in the USB memory device.

Update Version

UXXXXXX2

After the screen shown below is displayed, press

ENTER.

System software was

successfully updated.

Remove the USB memory device.

Download from Www.Somanuals.com. All Manuals Search And Download.

Enjoying Photo/Music/Video Playback

You can connect the TV to a USB memory device, USB hard drive or home network (DLNA) server to enjoy

viewing pictures, listening to music, and watching videos.

• Depending on the USB memory device/USB hard drive/home network (DLNA) server, the TV may not be able to recognize the

recorded data.

• It may take time to read the recorded data if the USB memory device/USB hard drive/home network (DLNA) server contains

many ﬁles or folders.

• Use only alphanumeric characters for naming ﬁles.

• File names over 80 characters (may vary depending on character set) may not be displayed.

Connecting a USB Memory Device/USB Hard Drive

Insert the USB memory device with recorded photos, music or videos into the USB 1 or USB 2 terminal on the TV.

• If USB memory devices are inserted into both terminals, the USB 1 terminal has priority.

• When connecting a USB hard drive, be sure to use a hard drive with an AC adapter.

• Do not remove a USB memory device or memory card from the TV while transferring ﬁles, using the slide show function, or

switching screens, or before you exit "USB" from the INPUT list.

• Do not insert and remove a USB memory device/USB hard drive to and from the TV repeatedly.

• When using a card reader, be sure to insert Memory ﬁrst before using the card reader.

• USB input cannot be selected when displaying the browser. Close the browser ﬁrst.

CAUTION

• Do not use a USB extension cable when connecting a USB memory device to the USB terminal on the TV.

• Using a USB extension cable with the USB memory device may prevent the TV from performing correctly.

Connecting a Home Network (DLNA) Server

Connect the TV to the home network (DLNA) server using an ETHERNET cable.

• You can also connect a Home Network (DLNA) server by using a wireless LAN.

ETHERNET cable

Home network (DLNA) server

Router

• Do not disconnect a home network (DLNA) server from the TV while transferring ﬁles, when a screen is switching to another or

before you exit "Home Network (DLNA)" from the INPUT list.

• Do not connect and disconnect a home network (DLNA) server from the TV repeatedly.

Download from Www.Somanuals.com. All Manuals Search And Download.

Enjoying Photo/Music/Video Playback

USB Device Compatibility

Selecting the Folders to Play Back

USB device

USB Memory, USB card reader (Mass

Storage class), USB hard drive

File system

Photo ﬁle

format

FAT/FAT32/NTFS (USB hard drive only)

JPEG (.jpg) (DCF2.0 compliant)

Music ﬁle

format

MP3 (.mp3)

Bitrate: 32k, 40k, 48k, 56k, 64k, 80k,

96k, 112k, 128k, 160k, 192k, 224k,

256k, 320kbps

Sampling frequency: 32k, 44.1k, 48kHz

Video ﬁle format

File

extension

Container

Video

Audio

• To play back data on a USB memory device, insert the

USB memory device on the TV. USB mode is selected

automatically. (Go to step 2)

• Use the following procedure to switch back to USB mode

after switching from USB mode to another mode.

DivX 3.11/4.x/5.1/6.0

XviD

MP3

Dolby Digital

LPCM

.avi

AVI

H.264

MPEG4

Motion Jpeg

ADPCM

DivX 3.11/4.x/5.1/6.0

XviD

H.264

MPEG4

DivX 3.11/4.x/5.1/6.0

XviD

MPEG4

VC-1

Windows Media Video v9

MP3

Dolby Digital

LPCM

Select "USB" or "Home Network (DLNA)" from

INPUT list screen.

.mkv

MKV

ASF

Press D.

ADPCM

c d

) to select the drive/server

Press

(or

MP3

Dolby Digital

LPCM

where you want to ﬁnd your ﬁles, and then press

ENTER.

.asf

.wmv

• For USB mode, select the drive.

• When in DLNA mode, select the server.

WMA

.mp4

.mov

.3gp

.vro

.mpg

.mpeg

H.264

MPEG4

Motion Jpeg

c d

Press

to select "Photo", "Music" or "Video",

MP4

(SMP4)

MP3

AAC

and then press ENTER.

Example

Dolby Digital

MPEG

MPEG2

MPEG1

LPCM

Photo

Music

• Progressive format jpeg ﬁles are not supported.

• USB 1.1 devices may not be played properly.

• Operation using USB hubs is not guaranteed.

• Some video ﬁle formats may not be played depending on

the ﬁle.

Video

• Some images may not be displayed in the appropriate

aspect ratio depending on the ﬁle format.

c d

Press

to select the desired folder, and then

press ENTER.

Home Network (DLNA) Server Compatibility

Photo ﬁle format

Music ﬁle format

Video ﬁle format

JPEG

LPCM, MP3

MPEG2-PS, MPEG2-TS,

WMV, ASF, MP4, MOV, AVI

• The Media screen can be displayed even by using the

application window. To display the application window,

press SmartCentral. (See page 21.)

• You cannot switch the input mode if a USB memory device

is not connected.

• You do not need to select the drive/server in step 2 when

there is only one drive in the connected USB memory

device or there is only one home network (DLNA) server

connected to the TV.

• 16 is the maximum number of USB drives and 10 is the

maximum number of home network (DLNA) servers that

can be displayed.

• Progressive format jpeg ﬁles are not supported.

• Some video ﬁle formats may not be played depending on

the ﬁle or the server.

• If the TV is turned off and then on again, the number

assigned to the USB drive may change.

• "VIEW MODE" is ﬁxed during the Photo or Music mode.

During "Video mode", you can select "Auto" or "Original".

• The key guide display disappears automatically after a

particular time has elapsed. To display the key guide

display again, press DISPLAY.

Download from Www.Somanuals.com. All Manuals Search And Download.

Enjoying Photo/Music/Video Playback

Viewing Individual Photos

Playing Back Files on a USB Memory

Device/Home Network (DLNA) Server

The photo selected on the thumbnail selection screen

is displayed.

Buttons for individual display operation

Photo Mode

Buttons

Description

Viewing Thumbnails

Example

Go to the previous/next photo in the same

directory.

Return to the thumbnail selection screen.

Rotate the photo by 90 degrees to the left.

Rotate the photo by 90 degrees to the right.

c d

RETURN

A (red)

B (green)

...

picture 1

picture 2

picture 3

picture 4

picture 5 ...

• Rotating photos only applies to the temporarily selected

item and this setting is not saved.

• The key guide display disappears automatically after a

particular time has elapsed. To display the key guide

display again, press DISPLAY.

Slide Show

This screen image is for the USB mode. It may be slightly

different in the Home network (DLNA) mode.

The photos displayed on the thumbnail selection

screen are displayed as a slide show.

Buttons for slide show operation

Buttons

RETURN

D (yellow)

Description

Return to the thumbnail selection screen.

Display the USB MENU/Home Network

(DLNA) Menu screen.

• The selected BGM is played repeatedly.

• The slide show continues until you press RETURN.

• For setting the slide show speed, select "Select Slide Show

Interval" on the USB MENU/Home Network (DLNA) Menu

screen.

• The key guide display disappears automatically after a

particular time has elapsed. To display the key guide

display again, press DISPLAY.

Buttons for thumbnail operations

Buttons

Description

Select a desired item.

a b c d

ENTER

When selecting a folder icon:

Enter this directory.

When selecting a photo thumbnail:

Enlarge the photo.

RETURN

A (red)

Return to the previous process.

USB mode:

Select the images to be displayed. Press

this button to add or remove a checkmark.

Home Network (DLNA) mode:

Display the Media screen.

B (green)

Display the music list screen. You can select

the background music to be played for the

slide show.

C (blue)*

Start the slide show.

D (yellow)

Display the USB MENU/Home Network

(DLNA) Menu screen.

* This function is available only for the USB mode.

• When there are invalid photo ﬁles, the X mark will be

displayed for the ﬁle. (USB mode only.)

• You can see the ﬁle name, shooting date, ﬁle size and pixel

size of the selected photo in the lower-left corner of the

screen (shooting date is only available in the EXIF ﬁle format).

Download from Www.Somanuals.com. All Manuals Search And Download.

Enjoying Photo/Music/Video Playback

Music Mode

Example

...

music 1

music 2

music 3

music 4

music 5

...

SONG_01.MP3

SONG_02.MP3

SONG_03.MP3

SONG_04.MP3

SONG_05.MP3

SONG_06.MP3

SONG_07.MP3

3:42

4:55

4:35

4:08

4:20

3:55

4:26

SONG_03.MP3

0:14 / 4:35

USB Menu

On the menu to be displayed in USB mode, use

This screen image is for the USB mode. It may be slightly

different in the Home network (DLNA) mode.

b to select an item and make settings to your

preferences.

Example

Buttons for music mode

Buttons

c d

Description

Select a desired item.

When selecting a folder icon:

Enter this directory.

When selecting a music ﬁle:

Play music.

Return to the previous process.

USB MENU

Select Slide Show Interval

Select Slide Show BGM

Set All Slide Show Image

Reset All Slide Show Image

Remove USB Device

[10sec]

ENTER

RETURN

A (red)

USB mode:

Select the music to be played back. Press

this button to add or remove a checkmark.

Home Network (DLNA) mode:

Display the Media screen.

Stop music.

Select Slide Show Interval

■

Specify the length of time before the next image

appears.

Press b to select the desired length of the time, and

then press ENTER.

B (green)

C (blue)

Play/Pause music.

5sec/10sec/30sec/60sec

D (yellow)* Display the USB MENU screen.

* This function is available only for the USB mode.

• For DLNA mode, follow the same procedure.

• Depending on the photo ﬁles, the length of the slide show

interval may differ from the selected interval time.

• When there are invalid music ﬁles, the X mark will be

displayed for the ﬁle. (USB mode only.)

• The displayed play time may differ slightly from the actual

play time depending on the ﬁles.

Select Slide Show BGM

■

The music list screen appears when you select "Select

Slide Show BGM".

USB Menu

You can select the music to be played in the

background while the slide show is being displayed.

On the menu to be displayed in USB mode, use

to select an item and make settings to your

Select the music you want to play from the music

preferences.

list.

Example

• For operations on the music list screen, see "Music

Mode".

USB MENU

Set All Auto Play

Press RETURN to display the thumbnail selection

screen, and then press C to start the slide show

and the background music.

Reset All Auto Play

Remove USB Device

* For details, see "Remove USB Device".

• All of the music ﬁles are selected by default.

Set/Reset All Auto Play

■

Set/Reset All Slide Show Image

■

Selecting "Set All Auto Play" or "Reset All Auto Play"

will display the music list screen. On the screen, set or

reset the music to be played back in the slide show.

Set All Auto Play: Checkmarks are added to all the

music ﬁles.

Selecting "Set All Slide Show Image" or "Reset All

Slide Show Image" will display the thumbnail selection

screen. On the screen, set or reset the images to be

displayed in the slide show.

Set All Slide Show Image: Checkmarks are added to all

the images.

Reset All Slide Show Image: Remove all the

checkmarks from all the images.

Reset All Auto Play: Remove all the checkmarks from

all the music ﬁles.

Remove USB Device

■

c d

/ to

To remove the USB device properly, use

select "Yes" and then press ENTER.

Download from Www.Somanuals.com. All Manuals Search And Download.

Enjoying Photo/Music/Video Playback

Buttons for playing mode

Video Mode

Buttons

Description

Example

Go to the beginning of a ﬁle by pressing

...

video 1

video 2

video 3

video 4

video 5

...

once and the previous ﬁle by pressing

Go to the next ﬁle.

twice.

VIDEO_01.avi

VIDEO_02.divx

VIDEO_03.divx

VIDEO_04.avi

VIDEO_05.divx

VIDEO_06.divx

VIDEO_07.avi

3:42

4:55

4:35

4:08

4:20

3:55

4:26

USB mode:

The fast forward speed changes every time you

press . After playing to the end, the TV goes

to the next ﬁle and starts to play.

Home Network (DLNA) mode:

Jump forward in a video. *2

This screen image is for the USB mode. It may be slightly

different in the Home network (DLNA) mode.

USB mode:

The reverse speed changes every time you

press . After going back to the beginning, the

TV starts to play the same ﬁle.

Home Network (DLNA) mode:

Jump back in a video. *2

ENTER

USB mode:

Pause the video.

Home Network (DLNA) mode:

Play/Pause the video. *2

RETURN Go back to the ﬁle selection screen.

A (red)*1 Jump to the scene where playback was last

stopped.

(green) Stop a video.

C (blue) Display the USB/home network (DLNA)

operation panel.

Buttons for ﬁle selecting operations

(yellow)*1 Display the USB MENU screen.

0-9*1

Jump to a point in the video during playback of

a ﬁle without chapters.

Buttons

Description

Select a desired item.

/ / /

You can jump to a later point by pressing a

higher number.*3

ENTER

When selecting a folder icon:

Enter this directory.

When selecting a video ﬁle: Play the video.

*1 These functions are available only for the USB mode.

*2 Jump forward/back and play/pause may not be available

depending on the ﬁles.

*3 During playback of a ﬁle without chapters, playback points

are set automatically. Playback points are set at intervals of

a one-tenth of playback time.

Example for a ﬁle with a playback time of 100 minutes:

Pressing 1 jumps 10 minutes forward, and pressing 2 jumps

20 minutes forward. Pressing 0 returns to the start of the ﬁle

being played back.

RETURN Return to the previous process.

A (red)

USB mode:

Select/deselect items (checkmarks are added

to the selected items).

Home Network (DLNA) mode:

Display the Media screen.

(yellow)

Display the USB MENU screen.

* This function is available only for the USB mode.

Download from Www.Somanuals.com. All Manuals Search And Download.

Enjoying Photo/Music/Video Playback

Using the operation panel

Buttons for using the Home Network (DLNA)

operation panel

■

You can use the operation panel for video playback

operations.

Starts playback.

You can call up this operation panel by pressing

Go to the beginning of a ﬁle by pressing once

or to the previous ﬁle by pressing twice.

MENU after you press

to select "USB Operation

Panel"/"Home Network (DLNA) Operation Panel" from

"System Options" > "View Option".

Example

)

Sets pauses and still pictures.

Go to the next ﬁle.

Playback stops.

Jump back in a video.

Jump forward in a video.

Audio

Title

Resume

jump

USB Menu

On the menu to be displayed in USB mode, use

Buttons for using the USB operation panel

b to select an item and make settings to your

preferences.

•

Hold down to go in reverse.

Starts playback.

Hold down to fast forward.

Video without chapters: Press one time to

return to the previous playback point.* Press

two times to return to the previous ﬁle.

Video with chapters: Press one time to return

to the previous chapter. Press two times to

return to the previous ﬁle.

Menu for ﬁle selecting operations

Example

USB MENU

Set All Auto Play

Reset All Auto Play

Remove USB Device

)

Sets pauses and still pictures.

Video without chapters: Press one time to

advance to the next playback point.* Press two

times to display the next ﬁle.

* See page 43 for details on the Remove USB Device

function.

Video with chapters: Press one time to advance to the

next chapter. Press two times to display the next ﬁle.

Set/Reset All Auto Play

■

Selecting "Set All Auto Play" or "Reset All Auto Play"

will display the video list screen. On the screen, set or

reset the video to be played back in the slide show.

Set All Auto Play: Checkmarks are added to all the

video ﬁles.

Audio

Change the audio when multiple audio is

available for the video you are watching.

Playback stops.

Change the Closed Caption display.

Displays the title (edition).

Jump to the scene where playback was last

stopped.

Title

Resume

jump

Reset All Auto Play: Remove all the checkmarks from

all the video ﬁles.

Menu for playing mode

* During playback of a ﬁle without chapters, playback points

are set automatically. Playback points are set at intervals of a

one-tenth of playback time.

Example

Example for a ﬁle with a playback time of 100 minutes:

USB MENU

Title (Edition)

Playback points are set every 10 minutes. Pressing

one time after viewing the ﬁle for 15 minutes jumps to the

20-minute playback point.

Chapter

Show Video Information

• Reverse/fast forward continues from one ﬁle to another

during continuous playback.

Remove USB Device

• Use "CC" on the operation panel to change the Closed

Caption display. You can also switch the Closed Caption

display by using "System Options" > "View Option" >

"Change CC" or by pressing CC on the remote control unit.

• Use "Audio" on the operation panel to change the audio.

You can also switch the audio by using "System Options" >

"View Option" > "Change Audio".

* See page 43 for details on the Remove USB Device

function.

Title (Edition)/Chapter

■

Selecting "Title (Edition)" or "Chapter" will display a list

of titles/chapters contained in the video ﬁle. Select the

title or chapter you want to play back.

• The selected title or chapter is played back.

• "0-9" is displayed for ﬁles without chapters. Playback

jumps to the playback point of the selected number.

• If there is Edition information, this screen is displayed when

the title is selected.

• If there is no title or edition, you cannot select "Title

(Edition)".

• "Chapter" cannot be selected when there is no chapter.

Show Video Information

■

The information of the current ﬁle is displayed.

Download from Www.Somanuals.com. All Manuals Search And Download.

Enjoying Photo/Music/Video Playback

DivX^®Setup

This is the function to conﬁrm your registration code.

You need to register the code at http://www.divx.com.

Press MENU to display the menu screen.

c d

Press

to select "Initial Setup", and then press

ENTER.

Press

to select "DivX^®Setup", and then

press ENTER.

DivX^®VOD registration

■

You can ﬁnd your registration code on this menu. You

need to register the TV at http://www.divx.com before

playing the DivX content.

DivX^®VOD deregistration

■

You can ﬁnd your deregistration code on this menu.

You need to deregister the TV at http://www.divx.com

to release the registration.

• This function is available only for the USB mode.

• This function may not work while an Internet application is

being used.

Download from Www.Somanuals.com. All Manuals Search And Download.

Other Viewing Options

Presetting Remote Control Function

Operating the Connected Equipment

You can operate the connected AV products (AV

receiver, cable box, SAT tuner, DTV, VCR, BD, DVD,

LD) using the presetting manufacturer function of your

remote control unit.

To operate the connected equipment, press STB,

DVD•VCR or AUDIO to select your device. (STB

(cable/satellite set-top box), BD, DVD, VCR or AUDIO.)

The remote control unit button will function as follows.

• When you operate VCR, BD or DVD, press INPUT to select

the terminal connected to your device.

• CABLE and SAT cannot be selected at the same time.

1 POWER (SOURCE)

• Turns the connected equipment power on and off.

2 ,

• Starts playback. (VCR, BD, DVD)

3 *ꢀ

• Rewinds the tape and allows picture search. (VCR)

• Hold down to go in reverse. (BD, DVD)

4 +

• Stops the tape transport. (VCR)

• Playback stops when pressed. With some Blu-ray disc/

DVD players, pressing the button twice may open the

disc tray. (BD, DVD)

5 .

• Pressing quickly once takes you to the start of the chapter

currently playing. Each time you press it, you move back

to the start of the previous chapter. (BD, DVD)

6 0–9, • (DOT) (STB)

• Press a button (or buttons) that corresponds to the

channel that you wish to watch.

7 -

• Rapidly advances the tape and allows picture search.

(VCR)

• Hold down to fast forward. (BD, DVD)

8 )

• Sets pauses and still pictures. (VCR, BD, DVD)

9 /

• Pressing quickly once takes you to the start of the next

chapter. Each time you press it, you move ahead to the

start of the next chapter. (BD, DVD)

(

10 REC

• Starts recording. (VCR)

Presetting manufacturer codes

11 FLASHBACK

•

Press an appropriate button (STB, DVD VCR or

AUDIO) to operate the connected equipment.

• Press to switch between the current channel and the

channel you were watching immediately before. Some

manufacturers do not preset FLASHBACK. (STB)

•

Press an appropriate button (STB, DVD VCR or

U V

AUDIO) and DISPLAY at the same time to enter

• Press CH or CH

to tune in to a higher or lower

the code registration mode.

channel. (STB)

• Press to select the channel of the TV tuner on the VCR.

(VCR)

Press 0–9 to enter the manufacturer code. (See

page 48.)

13 MENU

• Preset mode is ﬁnished once the LED no longer lights

up.

• When this button is pressed, the BD/DVD menu will

display. (BD, DVD)

After registering the code, the LED will stop blinking

then turn off after one second. (If you perform an

incorrect operation, the LED will blink quickly then

turn off.)

, ENTER

•

a b c d

: Press the button to select items on the STB

a b c d

GUIDE screen or STB MENU screen. (STB)

Press the button to select items on the BD/DVD menu

screen. (BD, DVD)

• ENTER: Press to activate the selected function. (STB,

BD, DVD)

Download from Www.Somanuals.com. All Manuals Search And Download.

Other Viewing Options

Manufacturer codes

VCR BRAND

REMOTE CONTROL CODE

NUMBER

REMOTE CONTROL CODE

NUMBER

STB BRAND

AUDIO DYNAMICS

BROCKSONIC

CANON

ANVISION

04, 05

CABLE STAR

DISH NETWORK

DIRECTV

04, 05

39, 40

02, 03, 10, 11, 17, 20

02, 03, 10, 11, 12, 20,

25-34

04, 05, 08, 12, 15, 16,

18, 19, 22, 23

14, 21

04, 05, 08, 13, 15, 16,

18, 19, 22, 23

04, 05

14, 36*, 37*

01, 09, 24

04, 05, 08, 13, 15, 16,

18, 19, 22, 23

06, 35

CRAIG

CURTIS MATHIS

DBX

EMERSON

INSTANT REOLYA

JC PENNEY

JVC

EAGLE

G.INSTRUMENT

GERROLD

10, 13, 14

JERROLD

MAGNAVOX

09, 16, 17, 22

KENWOOD

MAGNAVOX

MAGNIN

MOTOROLA

OKA SIGMA

PANASONIC

PHILIPS

04, 05, 06

MEMOREX

MONTGOMERY WARD 02

NEC

PIONEER

RANDTEK

RCA

S.ATLANTA

VIEWSTAR

PANASONIC

PENTAX

PHILCO

PHILIPS

QUASAR

REALISTIC

SAMSUNG

SHARP

04, 18, 19, 20, 21

04, 05

04, 05, 06

01, 02

11, 12

01, 02, 03

07, 08, 15

04, 05, 06

ZENITH

SONY

• Numbers marked with * are SAT codes, all others are STB

codes.

SYLVANIA

TATUNG

TEAC

REMOTE CONTROL CODE

TMK

YAMAHA

AUDIO BRAND

NUMBER

SHARP

SHARP (SOUND BAR)

REMOTE CONTROL CODE

NUMBER

BD/DVD/LD BRAND

DENON

JVC

KENWOOD

MAGNAVOX

MARANTZ

MITSUBISHI

PANASONIC

PHILIPS

PIONEER

PROSCAN

RCA

SAMSUNG

SHARP

SONY

TOSHIBA

YAMAHA

ZENITH

24, 37

26, 38

30, 33, 35

25, 39

29, 34

23, 32, 41, 42

27, 40

• Depending on the brand, the codes of some BD players

may not be supported.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using AQUOS LINK

Controlling HDMI Equipment Using AQUOS LINK

What’s AQUOS LINK?

• Using the HDMI CEC (Consumer Electronics Control) protocol, with AQUOS LINK you can interactively operate

compatible system equipment (Blu-ray disc equipment, AV ampliﬁer, DVD).

• By connecting AQUOS LINK-compatible devices with HDMI-certiﬁed cables to the TV, you can control a

recorder or AV ampliﬁer using the remote control of the TV.

• AQUOS LINK allows you to operate the HDMI-connected equipment with one remote control.

Example

Connecting AQUOS

HDMI-certiﬁed cable *

BD Player via AQUOS

LINK-compatible

Audio system

* Use HDMI 1 to connect

ARC-compatible equipment.

HDMI-certiﬁed cable

Optical ﬁber cable

Back panel

horizontal inputs

Back panel

vertical inputs

AQUOS LINK-compatible

Audio system

AQUOS BD Player

• For connecting the TV to AQUOS LINK-compatible equipment, use commercially available cables.

• Point the remote control toward the TV, not to connected HDMI equipment.

• Video noise may occur depending on the type of HDMI cable used. Make sure to use an HDMI-certiﬁed cable.

• Up to 3 pieces of HDMI recording equipment and one AV ampliﬁer can be connected using this system.

• These operations affect the HDMI equipment selected as the current input source. If the equipment does not operate, turn on

the equipment and select the appropriate input source using INPUT.

• The AQUOS LINK feature may not operate properly when an HDMI splitter or AV selector unit is used. These devices may

cause interruptions to the image and/or sound.

Connected AQUOS LINK-compatible devices can be operated without

changing the settings of the remote control unit.

OPTION button will function only when AQUOS LINK is used.

One Touch Play

■

While the TV is in standby mode, it automatically turns on and plays back the

image from the HDMI source.

■

One Touch Recording

(

Press REC while you are viewing a broadcast received with the AQUOS

LINK-compatible recorder. The AQUOS LINK automatically recognizes the

connected HDMI device and starts recording.

■

Single remote control

The AQUOS LINK automatically recognizes the connected HDMI device and

you can control the TV and the devices as if using a universal remote control.

■

Control the AQUOS LINK-compatible audio system

Set the volume of AQUOS LINK-compatible audio system.

• The above description is an example of the AQUOS LINK function.

• The steps in “AQUOS LINK Setup” on page 50 need to be completed beforehand.

• Refer to this operation manual and the operation manual of the AQUOS LINK device

to be used with this TV.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using AQUOS LINK

Channel Select Key

AQUOS LINK Setup

This function can be set for each input terminal.

Example

On: The remote control unit of the TV can be used to

select the channel, display program information, and

perform other operations of the connected AQUOS

LINK-compatible recorder.

System

Options

System Options

AQUOS LINK Setup

Off: This function does not work.

AQUOS LINK Control

Audio Return Channel

[On]

Auto Power On

This function allows you to listen to the TV audio via

audio equipment without using an optical ﬁber cable,

which conventionally is required.

Requirements for using an ARC-compatible AV

ampliﬁer:

[Yes]

Selecting Recorder

Channel Select Key

Audio Return Channel

[Auto]

• ARC-compatible AV ampliﬁer connected to the ARC-

compatible HDMI terminal (HDMI 1).

(Refer to the operation manual of the ARC-compatible

equipment for details.)

Press MENU to display the MENU screen, and then

press

Press

to select "System Options".

c d

• Use of an ARC-compatible cable.

to select “AQUOS LINK Setup”, and

a b

Auto: You can listen to the TV audio with ARC-

then press ENTER.

compatible audio equipment.

Off: This function does not work.

Press

to select a speciﬁc item, and then press

a b

ENTER.

• If the TV audio cannot be output from the AV ampliﬁer even

after making the necessary settings, connect the TV to the

AV ampliﬁer with an optical ﬁber cable and select “Off”.

Press

(or

) to select the desired setting,

a b

c d

and then press ENTER.

Press MENU to exit.

One Touch Playback

AQUOS LINK Control

Select AQUOS LINK Control to disable AQUOS LINK

function even when an AQUOS LINK-compatible HDMI

device is connected to the TV. This function prevents

the device from starting to operate unexpectedly.

On: You can operate AQUOS LINK-compatible

equipment.

Off: AQUOS LINK function does not work.

Auto Power On

If this is activated, the One Touch Play function is

enabled.

AQUOS LINK allows you to operate the HDMI-

connected equipment with one remote control.

Yes: While the TV is in standby mode, it automatically

turns on and plays back the image from the HDMI

source.

Press

to start playing back a title.

• The last played program is played back. You can use the

following buttons during broadcast viewing.

No: This function does not work.

Buttons

Description

Selecting Recorder

POWER

(SOURCE)

Turns the power of the HDMI connected devices

on and off.

When multiple AQUOS LINK-compatible devices are

connected, this function allows you to set the recorder

for recording when you press REC on the TV’s

remote control unit.

Hold down to go in reverse.

Starts playback.

(

Hold down to fast forward.

Playback stops.

Press

to select the recorder for recording.

a b

Sets pauses and still pictures.

)

Pressing quickly once takes you to the start of the

chapter currently playing. Each time you press it,

you move back to the start of the previous chapter.

Pressing quickly once takes you to the start of the

next chapter. Each time you press it, you move

ahead to the start of the next chapter.

7 8

do not function with the following

• The buttons

Blu-ray disc players currently available.

- BD-HP20U, BD-HP50U

Download from Www.Somanuals.com. All Manuals Search And Download.

Using AQUOS LINK

Link Operation Menu

Link

Operation

Link

Operation

Link Operation

Recorder Power On/Off

Device Operation panel

Play from Rec. List

Start Recording

Stop Recording

One Touch Recording

Show Start Menu

This function allows easy one-touch recording of the

program being viewed on the TV to AQUOS LINK-

compatible equipment with a recording function by

Change Media of Device

Link Booking (Rec. Book)

(

simply pressing REC on the remote control.

Prepare the connected AQUOS LINK-compatible

recorder for recording. Check the following items.

• Make sure that the antenna cable is connected.

• Check that there is sufﬁcient available space on the

recording media (HDD, DVD, etc.).

• On the TV, use “AQUOS LINK Setup” and “Selecting

Recorder” to select the equipment for recording.

• By default, the recorder connected to HDMI 1 is selected

for recording.

Change Audio Output Device

[By AQUOS SP]

Change Surround Mode

HDMI Device Selection

AQUOS LINK Setup

(

Press REC to start recording.

• When you are viewing a broadcast received with the

AQUOS LINK-compatible recorder selected in "Selecting

Recorder", recording to the AQUOS recorder of the

broadcast being viewed starts.

• When you are viewing a broadcast received with

equipment other than the AQUOS LINK-compatible

recorder selected in "Selecting Recorder" or other

(

external input equipment, pressing REC on the remote

control does not start recording.

Use the Link Operation Menu to stop recording.

Press OPTION to display the Link Operation

Menu screen.

Press

to select “Stop Recording”, and

then press ENTER.

Start/Stop Recording

You can also use the Link Operation Menu for

recording on the connected AQUOS LINK-compatible

equipment.

The Link Operation Menu allows you to make

adjustments during operation of AQUOS LINK-

compatible equipment.

Press OPTION to display the Link Operation Menu

screen.

Press OPTION to display the Link Operation Menu.

Select “Start Recording”, and then press ENTER to

start recording.

Press

to select the desired item, and then

(

• You can also start recording by pressing REC on the

press ENTER.

remote control unit.

• Speciﬁc operations differ depending on the item you

select. Following are the basic operations for each item.

Select “Stop Recording”, and then press ENTER to

stop recording.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using AQUOS LINK

Recorder Power On/Off

Link Booking (Rec. Book)

You can manually turn on/off the power of the

connected AQUOS LINK-compatible equipment.

Each time you press ENTER, the connected

equipment switches on or off.

You can call up the AQUOS LINK-compatible

recorder's EPG and preset timer recordings using the

TV's remote control.

Select the program on the recorder's EPG.

Device Operation Panel

You can use the device operation panel to control

playback operations.

c d

, ENTER, RETURN, EXIT and the

• You can use

colored buttons.

c d

to select the desired operation.

Press

• This function works only when an AQUOS LINK-compatible

recorder is connected.

• Refer to the operation manual of the recorder for details.

• This function works only when AQUOS LINK-compatible

equipment with the Device Operation Panel function is

connected.

Change Audio Output Device

You can select to listen to the TV sound only from the

AQUOS LINK-compatible audio system.

Play from Rec. List

By AQUOS audio SP: The sound from the TV speaker is

muted and only the sound from the AQUOS LINK-

compatible audio system is audible.

This function allows you to display the title list for the

connected equipment and to play back the title you

want to enjoy.

• You can use VOL+/- and MUTE.

By AQUOS SP: The sound is output from the TV

Before using this function

Power on the AQUOS LINK-compatible equipment,

and select the appropriate external input.

speaker.

Change Surround Mode

You can manually change the AQUOS AUDIO speaker

system's sound mode.

The sound mode changes each time you press

ENTER.

• Refer to the operation manual of the AQUOS LINK-

compatible audio system for details.

c d

Select the title with

start playback.

, and then press

• This function works only when AQUOS LINK-compatible

equipment is connected.

HDMI Device Selection

Show Start Menu

If multiple HDMI devices are connected in a daisy

chain, you can specify which device to control here.

You can call up a setup menu from the connected

AQUOS LINK-compatible equipment.

a b

to select the desired device from a list of

Press

connected HDMI devices, and then press ENTER.

• Depending on the status of the equipment (recording or in

standby mode, etc), the setup menu will not be displayed.

• The setup menu will not be displayed with the player BD-

HP20U currently available.

AQUOS Link Setup

You can also display the AQUOS LINK Setup screen

from the Link Operation Menu.

Change Media of Device

You can switch the media (HDD or DVD) for playback

or recording on the AQUOS LINK-compatible recorder.

• The Media type toggles each time you press ENTER in

"Change Media of Device".

Download from Www.Somanuals.com. All Manuals Search And Download.

Using a PC

Displaying a PC Image on the Screen

VIEW MODE

You can select the screen size.

Press VIEW MODE.

• The View Mode menu displays.

• The menu lists the View Mode options selectable for the type of video signal currently

being received.

Press VIEW MODE or

while the View Mode menu is displayed to select a

a b

desired item on the menu.

• You can sequentially select a View Mode that has its own aspect ratio.

• Connect the PC before making adjustments. (See page 16.)

• Selectable screen size may vary with input signal type.

• You can have the same settings by choosing "View Mode" on the menu items. (See page 30.)

Example: Screen size images

Input signal

Normal

Zoom

Stretch

Dot by Dot

4:3

Keeps the original

aspect ratio in a full

screen display.

For viewing

widescreen

programs. The top

and bottom of the

image is cropped.

An image fully ﬁlls the Detects the resolution

screen.

of the signal and

displays an image with

the same number of

pixels on the screen.

Input signal

Stretch

Dot by Dot

16:9

An image fully ﬁlls the Detects the resolution

screen.

of the signal and

displays an image with

the same number of

pixels on the screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using a PC

Example

Setting Audio Input

System

Options

Audio Select

System Options

This function sets the terminal to output the computer

audio.

View Option

The adjustment items vary depending on the input

source. Select the input source corresponding to the

terminal connected to the PC and then adjust the

desired item.

AQUOS LINK Setup

Input Terminal Setting

Menu Design

PC IN

■

Video: Select this when the TV and PC are connected

using an analog RGB cable and the audio is not input.

Video+Audio: Select this when the TV and PC are

connected using an analog RGB cable and the audio is

input via a Ø 3.5 mm stereo minijack.

Press MENU to display the MENU screen, and then

press

Press

to select "System Options".

c d

to select "Input Terminal Setting", and

a b

then press ENTER.

HDMI 1

■

Press

to select "PC input" or "Audio Select",

a b

and then press ENTER.

Press to select a speciﬁc adjustment item,

HDMI(Digital): Select this when the TV and PC are

connected using an HDMI-certiﬁed cable and audio is

input via the same cable.

a b

HDMI+Analog: Select this when the TV and PC are

connected using a DVI-HDMI conversion cable and the

audio is input via a Ø 3.5 mm stereo minijack.

and then press ENTER to set each item.

Press (or ) to select or adjust the desired

a b

c d

setting, and then press ENTER.

• When "Audio Select" is set to "HDMI(Digital)", sound will

not be produced if you use only an HDMI-certiﬁed cable to

connect HDMI-compatible equipment. To produce sound,

you should make an analog audio connection.

• If you want to connect HDMI-compatible equipment

using only an HDMI-certiﬁed cable, set "Audio Select" to

"HDMI(Digital)".

Adjusting the PC Image

Auto Sync. (for Analog PC Input Mode Only)

For automatically adjusting the PC image.

Yes: Auto Sync. starts and "Now adjusting the image."

displays.

No: This function does not work.

PC Compatibility Chart

It is necessary to set the PC correctly to display XGA

and WXGA signal.

• When "Auto Sync." is successful, "Completed" displays. If

not, "Auto Sync." failed.

• "Auto Sync." may fail even if "Completed" displays.

• "Auto Sync." may fail if the computer image has low

resolution, has unclear (black) edges, or is moved while

executing "Auto Sync.".

Horizontal Vertical

Frequency Frequency Standard

VESA

Resolution

• Be sure to connect the PC to the TV and switch it on before

starting "Auto Sync.".

720 x 400 31.5 kHz

31.5 kHz

640 x 480 37.9 kHz

37.5 kHz

70 Hz

Fine Sync.

60 Hz

72 Hz

75 Hz

56 Hz

60 Hz

72 Hz

75 Hz

60 Hz

70 Hz

75 Hz

60 Hz

VGA

Ordinarily you can easily adjust the picture as necessary

to change image position using "Auto Sync.". In some

cases, however, manual adjustment is needed to

optimize the image.

35.1 kHz

37.9 kHz

48.1 kHz

46.9 kHz

48.4 kHz

56.5 kHz

60.0 kHz

SVGA

XGA

800 x 600

H-Pos.: Centers the image by moving it to the left or right.

V-Pos.: Centers the image by moving it up or down.

Clock: Adjust when the image ﬂickers with vertical

stripes.

Phase: Adjust when characters have low contrast or

when the image ﬂickers.

1024 x 768

WXGA

SXGA

1360 x 768 47.7 kHz

1280 x 1024 64.0 kHz

• For resetting all "Fine Sync." adjustment items to the factory

SXGA+ 1400 x 1050 65.3 kHz

preset values, press

ENTER.

to select "Reset", and then press

a b

UXGA

1080p

1600 x 1200 75.0 kHz

1920 x 1080 67.5 kHz

• It is not necessary to adjust the "Clock" or "Phase" when a

digital signal is being input, so it cannot be selected.

• The default cursor position may not be in the center,

because the screen position variable ranges may be

asymmetrical.

VGA and XGA are registered trademarks of International

Business Machines Corp.

• The screen position variable ranges depend on the View

Mode or the signal type. The ranges can be seen on the

position-setting screen.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using a PC

Control of the TV

• The TV can be controlled from a PC, control panels

and other devices using the RS-232C or IP.

• Use a cross-type RS-232C cable, ETHERNET cable

(commercially available) or wireless LAN for the

connections.

Communication conditions for RS-232C

■

Set the RS-232C communication settings on the PC to

match the TV's communication conditions.

The TV's communication settings are as follows:

Baud rate:

Data length:

Parity bit:

9,600 bps

8 bits

None

• This operation system should be used by a person who is

accustomed to using computers.

Stop bit:

1 bit

Communication conditions for IP

Flow control:

None

■

Connect to the TV with the following settings made for

IP on the PC.

Communication procedure

■

Send the control commands from the PC via the RS-

IP protocol:

TCP/IP

232C or IP.

Host IP address: Set the IP address on the TV menu

The TV operates according to the received command

and sends a response message to the PC.

Do not send multiple commands at the same time.

Wait until the PC receives the OK response before

sending the next command.

Service:

None (Do not select Telnet or SSH)

TCP port#:

Set a port number on the TV menu

(Control port)

When you set your ID and password on the TV menu,

you need to enter them as soon as you connect to the

TV.

Command format

■

Eight ASCII codes

C1 C2 C3 C4 P1 P2 P3 P4

• The connection will be cut off when there has been no

communication for 3 minutes.

Command 4-digits

Return code

Parameter 4-digits

IP Control Setup

Example

Command 4-digits: Command. The text of four characters.

Parameter 4-digits: Parameter 0–9, x, blank, ?

Initial

Setup

Parameter

■

Input the parameter values, aligning left, and ﬁll with

blank(s) for the remainder. (Be sure that 4 values are

input for the parameter.)

Initial Setup

EZ Setup

When the input parameter is not within an adjustable

range, “ERR” returns. (Refer to “Response code format”.)

Any numerical value can replace the “x” on the table.

Broadcasting Setup

Internet Setup

Language

When “?” is input for some

commands, the

present setting

[English]

value responds.

Div

^®

Setup

Press MENU to display the MENU screen, and then

Response code format

■

press

Press

to select "Initial Setup".

c d

Normal response

Problem response (communication

to select "Internet Setup", and then

error or incorrect command)

press ENTER.

Press

to select "Network Setup", and then

Return code (0DH)

press ENTER.

Press

to select "IP Control Setup", and then

press ENTER.

Press to select "Change", and then press

c d

ENTER.

To use IP Control, press

and then press ENTER.

to select "Enable",

c d

Set the device name.

Set your login ID and password.

Set the port to use with IP Control.

Conﬁrm the settings, and then press "OK".

Download from Www.Somanuals.com. All Manuals Search And Download.

Using a PC

Command table

■

• Commands not indicated here are not guaranteed to operate.

CONTROL CONTENTS

CONTROL ITEM

COMMAND PARAMETER

POWER ON COMMAND SETTING

Off

The Power On command rejected.

The Power On command accepted.

On [RS-232C]

On [IP]

When the power is in standby mode, commands also go to waiting status

and so power consumption is just about the same as usual. With the

commands in waiting status, the Center Icon Illumination on the front of the

TV lights up.

Power Off

Power On

(Toggle)

It shifts to standby.

POWER SETTING

Power On

INPUT SELECTION TOGGLE

It input-switches by the toggle. (It is the same as an input change key)

It input-switches to TV. (A channel remains as it is. (Last memory))

1-8

1: HDMI 1, 2: HDMI 2, 3: HDMI 3, 4: HDMI 4,

5: COMPONENT, 6: VIDEO 1, 7: VIDEO 2, 8: PC

AV MODE SELECTION

0: (Toggle), 1: STANDARD, 2: MOVIE, 3: GAME,

4: USER, 5: DYNAMIC (Fixed), 6: DYNAMIC, 7: PC,

100: AUTO

Although it can choose now, it is toggle operation in inside.

VOLUME

Volume (0–60)

H-POSITION

V-POSITION

CLOCK

The screen position variable ranges depend on the View Mode or the

signal type. The ranges can be seen on the position-setting screen.

POSITION

Only PC mode. (0–180)

Only PC mode. (0–40)

0: (Toggle) [AV], 1: Side Bar [AV], 2: S.Stretch [AV]

3: Zoom [AV], 4: Stretch [AV], 5: Normal [PC]

6: Zoom [PC], 7: Stretch [PC],

PHASE

VIEW MODE

0: Although it can choose now, it is toggle operation in inside.

1: Only available when 4:3 signal is being input.

5, 6: Only available when 4:3 signal is being input.

8: [PC] Available except when UXGA is being input.

[AV] Only available when 1080i/p is being input.

9: Only available when 720p is being input.

10, 11: Available when USB-Video, DLNA-Video or Internet application is used.

8: Dot by Dot [PC] [AV], 9: Full Screen [AV]

10: Auto [USB-Video, DLNA-Video or Internet applications],

11: Original [USB-Video, DLNA-Video or Internet applications]

MUTE

0: (Toggle), 1: On, 2: Off

(Toggle)

0: Off, 1: OFF TIMER – 30 MIN., 2: OFF TIMER – 60 MIN.,

3: OFF TIMER – 90 MIN., 4: OFF TIMER – 120 MIN.

SURROUND

AUDIO SELECTION

SLEEP TIMER

CHANNEL

DIRECT

CHANNEL

(ANALOG)

The channel number of TV

(1–135)

An input change is included if it is not TV display.

In Air, 2–69ch is effective.

In Cable, 1–135ch is effective.

DIRECT

CHANNEL

(DIGITAL)

(0100-9999)

(1-999)

DIGITAL Air (Two-Part numbers, 2-digit plus 2-digit)

DIGITAL Cable (Two-Part numbers, 3-digit plus 3-digit)

Front half of DIGITAL CABLE CHANNEL NO. (Designate major channel)

DIGITAL Cable (Two-Part numbers, 3-digit plus 3-digit)

(0-999)

Rear half of DIGITAL CABLE CHANNEL NO. (Designate minor channel)

(0-9999)

(0-6383)

The channel number of TV +1

The channel number of TV

(Toggle)

DIGITAL Cable (One-Part numbers, 5-digit, less than 10,000)

DIGITAL Cable (One-Part numbers, 5-digit, more than 10,000)

If it is not TV display, it will input-switch to TV. (same function as CHU)

If it is not TV display, it will input-switch to TV. (same function as CHV)

Toggle operation of a closed caption.

The device name set in "IP Control Setup" is displayed.

The model name of the TV

The current version of the TV software is displayed.

The currently supported version of IP protocol is displayed.

CH UP

CH DOWN

–1

DEVICE NAME

MODEL NAME

SOFTWARE VERSION

IP PROTOCOL VERSION

REMOTE CONTROL BUTTONS

0-9: 0-9, 10: DOT, 11: ENT, 12: POWER, 13: DISPLAY,

14: POWER (SOURCE) 15: *, 16: ,, 17: -,

(

18: ), 19: ., 20: +, 21: /, 22: REC,

23: OPTION, 24: SLEEP, 27: CC, 28: AV MODE,

29: VIEW MODE, 30: FLASHBACK, 31: MUTE,

32: VOL -, 33: VOL +, 34: CH U, 35: CH V,

36: INPUT, 38: MENU, 39: SmartCentral , 40: ENTER,

41: a, 42: b, 43: c, 44: d, 45: RETURN, 46: EXIT,

47: FAVORITE CH, 48: Surround, 49: AUDIO,

50: A (red), 51: B (green), 52: C (blue), 53: D (yellow),

54: FREEZE, 55: FAV APP 1, 56: FAV APP 2,

57: FAV APP 3, 59: NETFLIX

• If an underbar (_) appears in the parameter column, enter a space.

• If an asterisk (*) appears, enter a value in the range indicated in brackets under CONTROL CONTENTS.

• Any numerical value can replace the “x” on the table.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Internet

By connecting your TV to a broadband system, you can access the Internet from the TV.

• Use "AQUOS ADVANTAGE LIVE" to obtain the latest software and receive online user support. (See page 59.)

• You can enjoy a variety of streaming content and Internet applications. (See page 64.)

Connecting to the Internet

• To connect your TV to the Internet, you must have a broadband Internet connection.

• If you do not have a broadband Internet connection, consult the store where you purchased your TV or ask your

Internet service provider or telephone company.

• When an Internet connection is made, an Ethernet and wireless connection cannot be used at the same time.

Use only one of the connection types. (See page 58.)

ꢀ

Using an ETHERNET cable

Use an ETHERNET cable (commercially available) to connect the ETHERNET terminal on the TV to your broadband

router (commercially available).

ETHERNET cable

LAN

Broadband router

Modem

Internet

ꢀ

Using the wireless LAN

This TV is equipped with a wireless LAN function.

For a wireless LAN connection, you must use "Wireless Setup" to connect the access point and TV. (See page 58.)

Wireless LAN router/

access point

Modem

Internet

• This TV has a built-in wireless LAN function. Using a separate wireless USB LAN adapter may result in radio communications

that do not comply with regulations on radio communications. Therefore, do not use a separate wireless LAN adapter.

• A wireless LAN connection and performance cannot be guaranteed for all residential environments. In the following cases, the

wireless LAN signal may be poor or drop, or the connection speed may become slower.

- When used in buildings made with concrete, reinforced steel, or metal

- When placed near objects that obstruct the signal

- When used with other wireless devices that emit the same frequency

- When used in the vicinity of microwave ovens and other devices that emit a magnetic ﬁeld, electrostatic charge, or

electromagnetic interference

• When there is signiﬁcant interference in the 2.4-GHz frequency (such as from other wireless LAN devices, Bluetooth^®devices,

2.4-GHz cordless telephones, and microwave ovens), it is recommended that you use a wireless LAN router/access point that

supports IEEE802.11a/n (5 GHz) and set the access point to transmit at 5 GHz. For setup details, see the operation manual of

your access point.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Internet

Press

ENTER.

to select "Push button", and then press

Internet Setup

• To conﬁgure the setting via PC, select "PIN code".

Follow the on-screen instructions and the operation

manual of the access point to conﬁgure the settings.

Select "Next" to complete the settings.

• The connection process starts and the WPS button on

the access point can be pressed.

Press the WPS button on the access point.

• Pressing the WPS button displays a conﬁrmation

screen. Please wait until a connection is established.

Example

Initial

Setup

Initial Setup

EZ Setup

Broadcasting Setup

Internet Setup

Language

When a connection is established, the connection

details are displayed. Press ENTER.

[English]

Div

^®

Setup

• Operations cannot be guaranteed when used with access

points that do not have Wi-Fi^®certiﬁcation.

Connection Type

Press MENU to display the MENU screen, and then

• A wireless LAN router/access point is required to connect

the TV to the Internet using a wireless LAN. See the

operation manual of your access point for setup.

• If your access point is set to a stealth mode (that prevents

detection by other devices), you may not be able to

establish a connection. In this case, disable the stealth

mode on the access point.

• A stable connection speed is required to play back

streaming content. Use an Ethernet connection if the

wireless LAN speed is unstable.

press

Press

to select "Initial Setup".

c d

to select "Internet Setup", and then

press ENTER.

Press

to select "Network Setup", and then

press ENTER.

Press

to select "Connection Type", and then

press ENTER.

Press

to select "Wired" or "Wireless", and

c d

then press ENTER.

• Before transferring to a third party or disposal, be sure to

initialize the wireless LAN settings.

• Please follow the legislation in your country when using the

wireless LAN outdoors.

• If you select "Wired", the signal is detected and setup

is performed automatically. Use "IP Setup" to check

and change the settings as necessary. (See page 59.)

• If you select "Wireless", use "Wireless Setup" to

conﬁgure the access point settings.

Interactive Service

Wireless Setup

If you do not want other people to connect to the

Internet in your absence, you can make settings to

keep the TV away from the Internet.

If your access point supports Wi-Fi Protected Setup

(WPS), it is recommended that you use this function

for the wireless connection. You can press the WPS

button on the access point to conﬁgure the settings

automatically.

• The name of the WPS button function may differ depending

on the access point. See the operation manual of the

access point for details.

Press MENU to display the MENU screen, and then

press

Press

to select “Initial Setup”.

c d

to select “Internet Setup”, and then

press ENTER.

Press

to select “Interactive Service”, and then

press ENTER.

Conﬁrm the current settings in "Connection Type".

• If "Wired" is selected, press

• Input the 4-digit secret number by using - .

0 9

to select “No”, and then press ENTER.

to select "Wireless".

c d

Press

c d

Press

to select "Wireless Setup", and then

• If you want to allow Internet connection, select “Yes”,

and then press

press ENTER.

ENTER

Press MENU to exit.

• Conﬁrm the settings. If each setting item is correct,

press MENU to exit.

• If you are conﬁguring the wireless setup for the ﬁrst

time or changing the settings, go to step 3.

Press

to select "Change", and then press

c d

ENTER.

Press

ENTER.

to select "WPS", and then press

• To select and register an access point manually, select

"Search" or "Manual Setup" and make the necessary

settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Internet

AQUOS Advantage Live

This function can be used to display up-to-date

information and allow you to receive support service

over the network.

Press AAL.

• You can also display the AQUOS ADVANTAGE LIVE

screen by pressing FAV APP on the remote control

unit. See page 34 for details on the FAV APP key

Assign function.

• When you are not connected to the Internet, a network

function explanation screen is displayed.

The services displayed vary depending on

circumstances.

Checking Your Internet Connection

Press AAL to display the TV+Web screen.

• If "

" or "

" is displayed after you connect to the

Internet, check your TV's network settings and connection.

• When the AQUOS ADVANTAGE LIVE screen appears, now

you are connected to the Internet.

• You can also display the AQUOS ADVANTAGE LIVE screen

by pressing FAV APP on the remote control unit. See page

34 for details on the FAV APP key Assign function.

c d

Press

to select the desired service.

Press EXIT to exit from the connected TV feature.

• The display may change as a result of a software update.

• When displaying TV+Web with a channel in which the

V-Chip is enabled, the cursor keys on the remote control

unit do not function.

• If you have failed to connect to the Internet in the above

operation, then an error message will appear. In this case,

press EXIT to exit from the connected TV feature to make

changes to the network settings.

• If you still cannot connect to the Internet, please consult

your Internet service provider or telephone company.

• When an application is used, you cannot make settings for

"Internet Setup".

If you need to make the settings of "Internet Setup", press

EXIT to exit from the connected TV feature.

ꢀ

If you cannot connect to the Internet

Perform the procedures below to check your TV's

network settings.

IP Setup

Press EXIT to exit from the connected TV feature.

Press MENU to display the MENU screen, and then

press

Press

to select “Initial Setup”.

c d

to select “Internet Setup”, and then

press ENTER.

Press

to select “Network Setup”, and then

press ENTER.

ENTER.

Press

to select “IP Setup”, and then press

• Check that numbers are displayed for each setting.

• If there are any settings without numbers, specify the

numbers by following the on-screen instructions.

• For information on how to enter text, see page 60.

Example

Setting IP information

[Current Setup]

IP Address

Netmask

Gateway

DNS

Auto Setup

MAC Address

XX:XX:XX:XX:XX:XX

Change

Initialize

Press MENU to exit.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Internet

Caps Off/Caps On/Caps Lock

Entering Text (Software Keyboard)

If “alphabet” is selected in “Character Set”, this switches

characters between uppercase and lowercase.

Each time you press ENTER, the character type switches as

shown below:

When you are editing an input screen or specifying the

Ethernet settings used for accessing the Internet, enter

text from the software keyboard.

Caps Off: all the characters are lowercased

Caps On: only the ﬁrst character is uppercased

Caps Lock: all the characters are uppercased

• You can enter up to 128 characters for text.

• Some special characters or diacritics may not be available

depending on where you enter the text.

Done

Applies the entered information and closes the software

keyboard.

The text you enter is displayed as you type it in.

To move the cursor (the current input position), use

Quit

“

” or “

” on the software keyboard.

Closes the software keyboard without applying the entered

information.

Press

to select the type of characters entered:

c d

alphabet, number or sign.

• You can also close the software keyboard by pressing

EXIT on the remote control unit.

(The selectable types depend on the input source.)

Displays the icon “

inserted.

”, indicating that a new line has been

Clear

Erases the character string.

• When the cursor is somewhere in a line: the character

string to the right of the cursor will be erased.

• When the cursor is at the right end of a line: the entire line

will be erased.

Delete

If the cursor is at the right end of a line, this erases text one

character at a time.

• You can also delete text by pressing RETURN on the

remote control unit.

Enters a space.

While you are entering text, likely input conversion candidates

are displayed based on what you typed in.

• You can also enter text by pressing A, B or C on the remote

control unit.

Buttons

Description

Moves the focus up. When the focus is at the top edge, this moves the focus to

the opposite edge (bottom edge).

Moves the focus down. When the focus is at the bottom edge, this moves the

focus to the opposite edge (top edge).

Moves the focus left. When the focus is at the left edge, this moves the focus to

the opposite edge (right edge).

When the focus is on “Character Set”, this selects the character type (moving

backwards).

When the focus is in an input box, this moves the cursor in the input box to the left.

Moves the focus right. When the focus is at the right edge, this moves the focus to

the opposite edge (left edge).

When the focus is on “Character Set”, this selects the character type (moving

forwards).

When the focus is in an input box, this moves the cursor in the input box to the

right.

ENTER

EXIT

Performs the processing for the button currently in the focus.

Closes the software keyboard without applying the original input elements for the

entered text.

Erases the text in the input box where the cursor is currently located.

When the cursor is at the end of a sentence, this acts as a backspace.

Directly enters the single-byte number for that button.

Directly enters prediction candidate 1.

RETURN

0-9

A (red)

B (green)

C (blue)

D (yellow)

Directly enters prediction candidate 2.

Directly enters prediction candidate 3.

Enters a space.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Internet

Using the Browser

About links

• Web pages on the Internet often include “links” that

allow you to jump to other web pages (or sites).

• “Links” can take various forms, including words

or images, but they always work in the same way

letting you jump to the link destination when you

select them.

• Selected items (such as links of text input ﬁelds) are

enclosed in a yellow frame.

• You can jump from a “link” to the corresponding link

destination.

ENTER,

a b c d

• Press

to select a link that you want to jump,

a b c d

and then press ENTER.

EXIT

• Press the button to return to the TV screen.

CAUTION

• If the power is cut due to a power failure or the TV being

unplugged while you are using the Internet, information

such as bookmarks or cookies may not be saved correctly.

RETURN

• Press the button to return to the previous page.

Example : The image shown below, which is only for

explanation, is subject to change.

When a security notiﬁcation window is displayed:

• Press

to close the window.

ENTER

• This window appears when you visit a web page that has

security protection, or when you move from a protected

page to an unprotected page.

XXX

:Scroll

:Tool

• In “Security Settings” you can set whether or not this

window is displayed. (See page 63.)

Pages with security protection are

clearly shown as such.

Tab

When a cookie conﬁrmation window appears:

Choose whether or not to accept the cookie (see page 63),

If content on a page is continued on another page,

directions to that page are shown clearly.

and then press

ENTER

• In “Cookies” settings you can set whether or not this

window is displayed. You can also opt to delete all the

cookies at once. (See page 63.)

You can use

to go to the continuation of a

a b c d

page.

• Where there is link text or a link image in the

direction pressed, the text or image is selected ﬁrst.

If this happens, press the same direction button

several times.

To users who access the Internet from a PC

• When you access the Internet from this TV, the

procedures may not be the same as regular

browser-based access on a PC.

• You cannot download ﬁles.

• You cannot view a history of the pages you have

visited.

• You cannot change the startup page displayed

when you start AQUOS ADVANTAGE LIVE.

• Pop-up windows appear in separate tabs.

• On some pages, video and audio cannot be

played, and text or images may not be displayed

correctly.

When “ ” is displayed in a page:

• The page failed to load successfully, or it contains images

with formats that cannot be displayed on the TV. Try

reloading the page by selecting “

toolbar.

” (see page 62) in the

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Internet

Using the Toolbar

Saving the URL of the Current Page

You can use the toolbar to control the browser and to

specify settings.

Adding a web page to your bookmarks allows you to

return to that page later by simply selecting it from your

list of bookmarks.

Display the page that you want to bookmark.

Press D to display the toolbar.

“

”

Press

to select

in the toolbar, and then

c d

press ENTER.

Select “Yes”, and then press ENTER.

• The page is added to your bookmarks.

Press D to display the toolbar.

Opening a Bookmarked Page

Press

to select a function, and then press

c d

Press D to display the toolbar.

ENTER.

“

”

Press

to select

in the toolbar, and then

c d

press ENTER.

Selected item

Description

• Your bookmarks list is displayed.

Displays the linked page in a new tab.

Press

to select the page you want to

a b c d

access, and then press ENTER.

Displays the Tab menu.

• The selected page is displayed.

• If you have bookmarked 11 or more web pages, press

Returns to the previous page.

to scroll through your bookmarks list.

c d

Goes back to the AQUOS ADVANTAGE LIVE

when you have viewed the previous page.

When opening a bookmark in a new tab:

Press A instead of ENTER.

• The Bookmarks menu appears.

Refreshes the page.

Interrupts a page while it is loading.

Select “Open in New Tab”, and then press

Displays the AQUOS ADVANTAGE LIVE.

Select this to open a bookmark.

ENTER.

Editing Bookmarks

You can rearrange or delete the bookmarks.

Press D to display the toolbar.

Adds the current page to your bookmarks.

Displays the Browser menu.

“

”

Press

to select

in the toolbar, and then

c d

press ENTER.

• Your bookmarks list is displayed.

Press

to select the title you want to edit from

a b

the bookmarks list, and then press A.

Using Tabs

• The Bookmarks menu appears.

You can use tabs to view up to 3 web pages at the

same time. Each page appears in a separate tab, and

you can switch between the tabs.

Switching between the URL and title name

■

Select “Display by Address” or “Display by Title” in the

Bookmarks menu, and then press ENTER.

Press B to display the Tab menu.

• You can also display the Tab menu by clicking “

the toolbar.

” in

Rearranging displayed items

■

Press

to select “Move Up” or “Move Down”, and

a b

Selected item

Select This

Description

then press ENTER.

Displays the web page in the

selected tab.

Deleting bookmarks

■

Close This Tab

Closes the selected tab.

Press

to select “Delete”, and then press

a b

•

You can also press C to close a

tab.

ENTER.

• To delete all the bookmarks, select “Delete All”.

Close Other Tabs Closes the other (unselected) tabs.

Press

ENTER.

to select “Yes”, and then press

c d

Create New Tab Creates a new tab.

•

You can also press A to create a

tab.

Press

to select a tab.

to select the item you want to use, and

c d

a b

then press ENTER.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Internet

Browser Settings

You can check or modify your browser settings from

the Browser menu.

Security Settings

Security:

Save Setting: If you select this option, a message is

displayed when you move from a protected page to an

unprotected page.

To change this setting, remove the tick, select “Save

Setting” and then press ENTER.

The Browser menu includes a display settings menu

and a security settings menu.

Root Certiﬁcates/CA Certiﬁcates: Displays the list of

certiﬁcates. To disable a certiﬁcate, select the certiﬁcate

to be disabled and press A to display the sub-menu.

Select “Disable”, and then press ENTER.

• Disabled certiﬁcates are shown unticked in the

certiﬁcate list screen.

Cookies:

Accept all: Select this option to accept all cookies.

Reject all: Select this option when you do not want to

accept cookies.

Prompt before accepting: When you open a page

that uses cookies, this option displays a conﬁrmation

message.

Press D to display the toolbar.

Delete All Cookies: Deletes all your cookies.

Server Certiﬁcates: Displays certiﬁcates for the connected

server.

“

”

Press

to select

in the toolbar, and then

c d

press ENTER.

Press

to select the settings menu you want to

to select and conﬁrm the item you want

c d

Browser Information: Displays browser information.

access.

Press

to set.

a b

•

This product contains NetFront Browser of

Press

to specify the required setting,

a b c d

ACCESS CO., LTD.

and then press ENTER.

•

ACCESS, the ACCESS logo and NetFront

Press D to exit.

are registered trademarks or trademarks of

ACCESS CO., LTD. in the United States,

Japan and/or other countries.

reserved.

View Settings

Zoom In/Out:

•

This software is based in part on the work of

the Independent JPEG Group.

Zoom in: Displays content enlarged to 200%.

Normal: Displays content at 100%.

Zoom out: Displays content reduced to 75%.

Encoding: Selects the desired encoding from the list below:

Western (ISO-8859-1)/Unicode (UTF-8)

Page Information: Displays information about the currently

displayed page.

Reset:

Yes: Resets the browser settings.

No: Does not reset the browser settings.

• “Reset” does not reset the certiﬁcation enable/disable and

Encoding settings.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Internet

Example

Using Applications via the Internet

By connecting the TV to the Internet, you can enjoy a

variety of broadband content, including videos, movies,

music, photos, and games.

Information

Identiﬁcation

Please check that the most current software is

loaded on TV by selecting "Auto Update Setting" on

"Software Update" (see page 37) or by visiting

http://www.sharpusa.com/products/support/

Digital Caption Info.

Software Update

Netﬂix Help

to check for a download of the newest software version.

VUDU Help

Deactivating Netﬂix Function

Press MENU to display the menu screen.

Press

to select "Information", and then press

to select "Netﬂix Help", and then press

to select "Deactivate", and then press

c d

ENTER.

Press

a b

ENTER.

Press SmartCentral to display the application

Press

c d

window.

ENTER.

Example

• To conﬁrm the Netﬂix status, check the information

displayed on the screen and click "OK".

Deactivating the VUDU Function

Press MENU to display the menu screen.

APP1

APP2

APP3

Press

to select "Information", and then press

to select "VUDU Help", and then press

to select "Yes", and then press

c d

ENTER.

Press

to select the desired application,

a b c d

a b

ENTER.

Press

and then press ENTER.

• If "

" or "

" is displayed after you connect to

the Internet, check your TV's network settings and

connection.

• When using this TV to access an Internet application

for the ﬁrst time, the Disclaimer appears on the screen.

c d

ENTER.

Press

to select "Agree", and then press ENTER.

a b

(You must select "Agree" to use the application.)

• Additional applications will be available in the future.

The screen for the selected application is displayed.

Follow the on-screen instructions for each

application.

• Check the web site of the provider for details on setup

and use of the functions.

• These applications are provided by content providers. The

available applications vary depending on your country or

region.

• The delivery speed of applications varies depending on

the network speed. Check the web site of the provider for

details on application setup and other information.

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Internet

When you access the Internet application for the ﬁrst time, the following appears.

• This message is available only in English.

DISCLAIMERS

This Sharp device facilitates the access to content and services provided by third parties. The content and

services accessible via this device belong to and may be proprietary to third parties. Therefore, any use of such

third party content and services must be in accordance with any authorization or terms of use provided by

such content or service provider. Sharp shall not be liable to you or any third party for your failure to abide by

such authorization or terms of use. Unless otherwise speciﬁcally authorized by the applicable content or service

provider, all third party content and services provided are for personal and non-commercial use; you may not

modify, copy, distribute, transmit, display, perform, reproduce, upload, publish, license, create derivative works

from, transfer or sell in any manner or medium any content or services available via this device.

Sharp is not responsible, nor liable, for customer service-related issues related to the third party content or

services. Any questions, comments or service-related inquiries relating to the third party content or service

should be made directly to the applicable content or service provider.

You may not be able to access content or services from the device for a variety of reasons which may be

unrelated to the device itself, including, but not limited to, power failure, other Internet connection, or failure to

conﬁgure your device properly. Sharp, its directors, ofﬁcers, employees, agents, contractors and afﬁliates shall

not be liable to you or any third party with respect to such failures or maintenance outages, regardless of cause

or whether or not it could have been avoided.

ALL THIRD PARTY CONTENT OR SERVICES ACCESSIBLE VIA THIS DEVICE IS PROVIDED TO YOU

ON AN “AS-IS” AND “AS AVAILABLE” BASIS AND SHARP AND ITS AFFILIATES MAKE NO WARRANTY

OR REPRESENTATION OF ANY KIND TO YOU, EITHER EXPRESS OR IMPLIED, INCLUDING, WITHOUT

LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, NON-INFRINGEMENT, FITNESS FOR A PARTICULAR

PURPOSE OR ANY WARRANTIES OF SUITABILITY, AVAILABILITY, ACCURACY, COMPLETENESS, SECURITY,

TITLE, USEFULNESS, LACK OF NEGLIGENCE OR ERROR-FREE OR UNINTERRUPTED OPERATION OR USE

OF THE CONTENT OR SERVICES PROVIDED TO YOU OR THAT THE CONTENT OR SERVICES WILL MEET

YOUR REQUIREMENTS OR EXPECTATIONS.

SHARP IS NOT AN AGENT OF AND ASSUMES NO RESPONSIBILITY FOR THE ACTS OR OMISSIONS OF

THIRD PARTY CONTENT OR SERVICE PROVIDERS, NOR ANY ASPECT OF THE CONTENT OR SERVICE

RELATED TO SUCH THIRD PARTY PROVIDERS.

IN NO EVENT WILL SHARP AND/OR ITS AFFILIATES BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY

DIRECT, INDIRECT, SPECIAL, INCIDENTAL, PUNITIVE, CONSEQUENTIAL OR OTHER DAMAGES, WHETHER

THE THEORY OF LIABILITY IS BASED ON CONTRACT, TORT, NEGLIGENCE, BREACH OF WARRANTY,

STRICT LIABILITY OR OTHERWISE AND WHETHER OR NOT SHARP AND/OR ITS AFFILIATES HAVE BEEN

ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.

Examples of Application Logos

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendix

Attaching the Stand (for LC-80LE633U)

• Before attaching (or detaching) the stand, unplug the AC cord.

• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being damaged.

CAUTION

• Attach the stand in the correct direction.

• Do not remove the stand from the TV unless using a wall mount bracket to mount it.

• Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.

• After attaching the stand to the TV, do not hold the stand when you put up, set up, move or lay down the TV.

Before attaching the stand to the TV, build a work

table on which to rest the TV.

The case is equipped with push-in tabs to hold

the cushioning materials in place. Push in the

tabs (2 for each location) to secure the cushioning

materials in the case.

• To build the table, use the cushioning materials used in the

packaging.

TOP-R

TOP-L

Push-in tabs

TOP-C

FRONT

After you have built the work table, spread a

blanket or similar soft cloth over the table and then

lay the TV display down on the covered table.

• Do not use a small table for this.

• Of the cushioning materials used, TOP-C is also used

during stand unit assembly. Be sure to assemble the stand

unit before building the work table.

Stand Unit Assembly

■

Conﬁrm that there are 12 screws (8 long screws

and 4 short screws) supplied with the stand unit.

Attaching the Stand to the TV

Set the post for the stand unit onto the TOP-C.

Attach the base to the post.

■

Insert the stand into the openings on the bottom of

the TV.

• Make sure that the stand is ﬁrmly inserted into the TV.

Improper installation may result in tilting of the TV set.

Insert and tighten the 8 screws into the 8 holes

on the bottom of the base.

• Hold the stand unit securely with one hand, and then

tighten the screws.

Long

screws

Insert and tighten the 4 screws into the 4 holes on

the rear of the TV.

FRONT

Short

screws

Building the Work Table

■

Insert each of the cushioning materials in the

respective directions shown in the ﬁgure.

• Insert TOP-L and TOP-R into the left and right sides of

the case respectively.

• In the installation procedure, be careful not to catch your

ﬁngers between the TV set and the ﬂoor.

• Insert TOP-C to ﬁt between the lines on the other side

of the case.

TOP-R

CASE

TOP-L

LINE

TOP-C

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendix

Removing the Stand

•

Before detaching (or attaching) the stand, make sure to turn off the TV and unplug the AC cord.

• Do not remove the stand from the TV unless using an optional wall mount bracket to mount it.

LC-80LE633U/LC-70LE640U/LC-60LE640U/LC-70C6400U/LC-60C6400U

CAUTION

■

Unfasten the four screws used to secure the stand in

place.

Detach the stand from the TV.

LC-52LE640U/LC-52C6400U

■

Before attaching/detaching the stand

• Before performing work spread cushioning over the base area to lay the TV on. This will prevent it from being

damaged.

Unfasten the four screws used to secure the stand in

place.

Detach the stand from the TV. (Hold the stand so it

will not drop from the edge of the base area.)

• In the installation procedure, be careful not to catch your ﬁngers

between the TV set and the ﬂoor.

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendix

Setting the TV on the Wall

LC-70LE640U/LC-60LE640U/LC-52LE640U/LC-70C6400U/LC-60C6400U/LC-52C6400U

■

CAUTION

• This TV should be mounted on the wall only with the wall mount bracket AN-52AG4 (SHARP). The use of other

wall mount brackets may result in an unstable installation and may cause serious injuries.

• Installing the TV requires special skill that should only be performed by qualiﬁed service personnel. Customers

should not attempt to do the work themselves. SHARP bears no responsibility for improper mounting or

mounting that results in accident or injury.

Using an optional bracket to mount the TV

•

You can ask a qualiﬁed service professional about using an optional AN-52AG4 bracket to mount the TV on the wall.

• Carefully read the instructions that come with the bracket before beginning work.

About setting the TV angle

Hanging on the wall

AN-52AG4 wall mount bracket.

(See the bracket instructions for details.)

AN-52AG4

LC-70LE640U/LC-70C6400U

• The center of the display:

0/5°

₆₄inch (10.0 mm) above the “c”

position.

LC-60LE640U/LC-60C6400U

• The “e” position is at the center of

the display.

LC-52LE640U/LC-52C6400U

• The center of the display:

2 ¹³

/₆₄inches (56.0 mm) under the

“e” position.

• Refer to the operation manual of

AN-52AG4 for details.

Angular mounting

Vertical mounting

LC-70LE640U

LC-70C6400U

• Due to the terminal conﬁguration on this TV, when

you wall-mount this model, make sure there is enough

space between the wall and the TV for the cables.

• To use this TV mounted on a wall, remove the AC cord

holder and the covers at the 4 locations on the rear of

the TV, and then use the screws supplied with the wall

mount bracket to secure the bracket to the rear of the

TV.

LC-60/52LE640U

LC-60/52C6400U

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendix

■

LC-80LE633U

The wall mount kit (sold separately) allows you to mount the TV on the wall.

For detailed information on installing the wall mount, see the instructions provided with the product. We

recommend you to contact a technician for assistance when installing it.

SHARP is not responsible for any damage to the product or injury to yourself or others if you elect to install the wall

mount on your own.

CAUTION

• Install your wall mount on a solid wall perpendicular to the ﬂoor.

When you want to attach the wall mount to surfaces other than plaster board, please contact your nearest

retailer/adviser for additional information. If you install the TV on a ceiling or slanted wall, it may fall and result in

severe personal injury. Always have two people mount the TV on a wall.

Wall Mount Kit Speciﬁcations

Standard dimensions for wall mount kits are shown below.

WALL

Max 1 ³⁷

Max 13 ²⁵

₆₄(340)

/₆₄(40)

WALL MOUNT KIT *¹

WALL MOUNT KIT

SCREW

WALL MOUNT

UNIT

₆₄(18.3)

₃₂(80)

CABINET

23 ⁵/₈(600) A

Min 3 ⁵

/₆₄(12)

MOUNTING

HOLES

DEPTH OF

MOUNTING HOLES

• VESA screw hole specs (A - B)

in millimeters

• Standard screw

• Quantity

23 ⁵/⁸- 15 ³/⁴

(600 - 400)

M8*²

*¹Must be smaller than the shaded area.

*²Use 1.25 pitch screws.

• Do not mount the TV at a tilt.

• Due to the terminal conﬁguration on this TV, when you wall-mount this model, make sure there is enough space

between the wall and the TV for the cables.

• To use this TV mounted on a wall, remove the cable tie as needed.

• Do not use screws that do not comply with the VESA standard screw speciﬁcations.

• Do not use screws that are longer than the standard length. Screws that are too long may cause damage to the inside

of the TV set.

• Do not fasten the screws too ﬁrmly or loosely. This may damage the product or cause the product to fall, leading to

personal injury. SHARP is not liable for these kinds of accidents.

• SHARP is not liable for product damage or personal injury when a non-VESA or non-speciﬁed wall mount is used or

the consumer fails to follow the product installation instructions.

Do not install the wall mount kit while your TV is turned on. It may result in personal injury due to

electric shock.

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendix

Troubleshooting

Problem

Possible Solution

• No power

• Check if you pressed POWER on the remote control unit. Page 17

• Is the AC cord disconnected? Page 8

• Has the power been turned on? Page 17

• Unit cannot be operated.

• External inﬂuences such as lightning, static electricity, may cause improper

operation. In this case, operate the unit after ﬁrst turning off the power of the TV or

unplugging the AC cord and replugging it in after 1 or 2 minutes.

• Remote control unit does not

operate.

• Is the equipment to be operated by the remote control unit set correctly? Press TV

to set the remote control unit to the setting for operating the TV.

• Are batteries inserted with polarity (

) aligned? Page 9

e f

• Are batteries worn out? (Replace with new batteries.)

• Are you using it under strong or ﬂuorescent lighting?

• Is a ﬂuorescent light illuminated near the remote control sensor?

• Is "RC Control Lock" selected in "Operation Lock Out"? Page 32

• Picture is cut off/with sidebar

screen.

• Is the image position correct? Pages 31 and 54

• Are screen mode adjustments such as picture size made correctly?

Pages 23 and 53

• Strange color, light color, or color • Adjust the picture tone. Pages 26 and 27

misalignment

• Is the room too bright? The picture may look dark in a room that is too bright.

• Power is suddenly turned off.

• Is the sleep timer set? Page 20

• Check the power control settings. Page 29

• The unit's internal temperature has increased. Remove any objects blocking vent or

clean.

• No sound

• Is connection to other components correct? Pages 12 to 16 and 49

• Is the volume too low? Page 20

• Is "Variable" selected in "Output Select"? Page 31

• Have you pressed MUTE on the remote control unit? Page 20

• Check the audio output of the connected external equipment. Is the volume too

low or muted?

• When external equipment is connected via an HDMI cable, you may need to

conﬁgure the audio to be output through the HDMI cable.

• When audio is not output from external equipment connected to the PC IN or HDMI

1 terminal, check the "Audio Select" setting. Page 54

• Even when external equipment is connected using an HDMI-certiﬁed cable, an audio

cable connection may be required depending on the type of equipment and the

media being played back. In this case, in addition to connecting an HDMI-certiﬁed

cable to the HDMI 1 terminal, connect a Ø 3.5 mm stereo minijack cable to the

AUDIO IN terminal and set "Audio Select" to "HDMI+Analog". Page 54

• When connecting a PC via an HDMI-certiﬁed cable, check the following:

- Is the audio output of the PC conﬁgured correctly? Check the audio output

settings and output audio format in Sound Properties on the PC.

Only PCM format audio can be output. Compressed audio (with a sampling rate

of 32kHz, 44.1kHz, or 48kHz) and DTS format audio cannot be output.

- Depending on the board, only video signals may be output. In this case, in

addition to connecting an HDMI-certiﬁed cable to the HDMI 1 terminal, connect a

Ø 3.5 mm stereo minijack cable to the AUDIO IN terminal and set "Audio Select"

to "HDMI+Analog". Page 54

• If you are using a DVI-HDMI conversion cable to connect external equipment to the

TV, check the following:

- Is an audio cable connected? The DVI-HDMI conversion cable is for video only.

Connect a Ø 3.5 mm stereo minijack cable to listen to the audio.

- Is HDMI 1 being used? When the TV is connected to another HDMI terminal, the

audio and video are not output together even if a Ø 3.5 mm stereo minijack cable

is connected to the shared AUDIO IN terminal for PC IN and HDMI 1.

Check the "Audio Select" setting. Set "Audio Select" to "HDMI+Analog". Page 54

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendix

Problem

Possible Solution

• No picture

• Is connection to other components correct? Pages 12 to 16 and 49

• Is the correct input selected? Pages 12 and 20

• Is "On" selected in "Audio Only"? Page 29

• If the PC image is not displayed, check the following:

- When connecting a laptop PC to the TV, check that display output mode of the

PC is set to external monitor.

- Check the resolution setting on the PC. Is a non-compatible signal being input?

Page 54

• Picture quality of HD programs is

poor.

• To enjoy HD images from external equipment, you are required to set up HDMI

connection or component connection.

• If the program content is not of HD quality, HD images cannot be displayed. Check

that the program you are viewing provides HD images.

• The HD cable/satellite set-top box may need to be conﬁgured to output HD images

via cable/satellite.

• The cable/satellite broadcast may not support a signal resolution of 1080p.

• The TV sometimes makes a

cracking sound.

• This is not a malfunction. This happens when the cabinet slightly expands and

contracts according to change in temperature. This does not affect the TV's

performance.

• The AQUOS ADVANTAGE LIVE

cannot be displayed.

• Is the ETHERNET cable connected correctly? Page 57

• Check the settings of "Internet Setup".

Pages 58 to 59

• Some Internet functions used on

a PC are not available from the

TV.

• The TV has only limited functions compared with regular PC browsers.

Page 61

Troubleshooting - Error Message

The example of an error message

Error code

Possible Solution

displayed on a screen

• Failed to receive broadcast.

E202

• Check the antenna cable. Check that the antenna is correctly

setup.

• No broadcast now.

E203

—

• Check the broadcast time in the program guide.

• An incompatible audio signal has

been received. Change the output

device audio settings to PCM.

• This message is displayed when an audio format other than

PCM is input. (Dolby Digital and DTS audio formats are not

supported.)

- Set the audio output format of connected external HDMI

equipment to PCM.

- Refer to the operation manual of the external equipment for

setting details.

Cautions regarding use in high and low temperature environments

• When the unit is used in a low temperature space (e.g. room, ofﬁce), the picture may leave trails or appear slightly delayed.

This is not a malfunction, and the unit will recover when the temperature returns to normal.

• Do not leave the unit in a hot or cold location. Also, do not leave the unit in a location exposed to direct sunlight or near a

heater, as this may cause the cabinet to deform and the front panel to malfunction.

Storage temperature: 4°F to 140°F ( 20°C to 60°C)

Download from Www.Somanuals.com. All Manuals Search And Download.

Appendix

CLEARING THE SECRET NUMBER

If you forget the secret number, clear the secret number using the following procedure.

Select an item from the list below to display the secret number input screen. (For operating the on-screen

display menu, see page 24.)

➝

System Options menu).

• "Color system" ( "Input Terminal Setting"

➝

• "EZ Setup" or "Reset" ( Initial Setup menu).

➝

• "CH Setup” ( "Broadcasting Setup"

Initial Setup menu).

➝

• "Parental CTRL" ( "Individual Setup"

Initial Setup menu).

➝

• "Interactive Service" ( "Internet Setup"

Initial Setup menu).

➝

• "Software Update" ( Information menu).

Press and hold both CH

and VOL on the TV simultaneously until the message appears on the screen.

The secret number is

• As a precautionary measure, make a note of your secret number above, and keep it in a safe place.

Trademarks

• SmartCentral is a registered trademark of Sharp Corporation.

• Products that have earned the ENERGY STAR^®are designed to protect the environment through superior energy

efﬁciency.

• Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby

Laboratories.

• “HDMI, the HDMI logo and High-Deﬁnition Multimedia Interface are trademarks or registered trademarks of HDMI

Licensing LLC in the United States and other countries.”

• DivX^®, DivX Certiﬁed^®, DivX Plus^®HD and associated logos are trademarks of Rovi Corporation or its subsidiaries

and are used under license.

• The Wi-Fi CERTIFIED Logo is a certiﬁcation mark of the Wi-Fi Alliance.

• The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.

• DLNA^®, the DLNA Logo and DLNA CERTIFIED™ are trademarks, service marks, or certiﬁcation marks of the Digital

Living Network Alliance.

•

and LC logo mark are registered trademarks of SHARP Corporation.

This product is embedded with LC Font technology, which was developed by SHARP Corporation for clearly

displaying easy-to-read characters on LCD screens. However, other fonts are used for some screen pages, too.

• ABOUT DIVX VIDEO: DivX^®is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This

is an ofﬁcial DivX Certiﬁed^®device that plays DivX video. Visit divx.com for more information and software tools to

convert your ﬁles into DivX videos.

• ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certiﬁed^®device must be registered in order to play purchased DivX

Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device setup

menu. Go to vod.divx.com for more information on how to complete your registration.

• Netﬂix and the Netﬂix logo are the registered trademarks of Netﬂix, Inc.

• VUDU™ is a trademark of VUDU, Inc.

Download from Www.Somanuals.com. All Manuals Search And Download.

Speciﬁcations

Model:

LC-80LE633U

Model:

Item

LC-70LE640U/LC-70C6400U

Size

LCD

80 Class (80 Diagonal)

70 Class (69 ¹/ Diagonal)

₂o

panel

Resolution

2,073,600 pixels (1,920

1,080)

TV-standard (CCIR)

American TV Standard ATSC/NTSC System

VHF 2-13ch, UHF 14-69ch

VHF/UHF

CATV

1-135ch (non-scrambled channel only)

Function

Receiving

Channel

Digital Terrestrial

Broadcast (8VSB)

2-69ch

Digital cable^*1

(64/256 QAM)

1-135ch (non-scrambled channel only)

BTSC System

Audio multiplex

Audio out

10 W

HDMI 1

HDMI in with HDCP, Audio in (Ø 3.5 mm stereo jack), ARC

HDMI 2

HDMI in with HDCP

Audio out (Ø 3.5 mm stereo jack)

Photo/Music/Video mode, Software update

COMPONENT in

Back panel

vertical

inputs

HDMI 3

HDMI 4

AUDIO OUT

USB 1

COMPONENT

VIDEO 1

VIDEO 2

AV in

Back panel

surface

inputs

AV in

Terminals

ANALOG RGB (PC) in (15-pin mini D-sub female connector),

Audio in (Ø 3.5 mm stereo jack)

PC IN

RS-232C

ANT/CABLE

AUDIO IN

9-pin D-sub male connector

75 Unbalance, F Type

for Analog (VHF/UHF/CATV) and Digital (AIR/CABLE)

Audio in (Ø 3.5 mm stereo jack)

Back panel

horizontal

inputs

DIGITAL AUDIO

OUTPUT

Optical Digital audio output

Network connector

1 (PCM/Dolby Digital)

ETHERNET

USB 2

Photo/Music/Video mode, Software update

English/French/Spanish

OSD language

Power Requirement

Power Consumption

AC 120 V, 60 Hz

307 W (0.1 W Standby with AC 120 V) 228 W (0.1 W Standby with AC 120 V)

TV + stand

TV only

123.5 lbs./56.0 kg

86.0 lbs./39.0 kg

Weight

114.6 lbs./52.0 kg

79.4 lbs./36.0 kg

Dimension^*2

TV + stand

TV only

73 ⁵/

45 ³/

43 ²⁵

17 ³/

63 ¹⁹

39 ⁴⁷

38 ⁷/

13 ¹/

₆₄g

₁₆g

₃₂g

3 ²⁹

3 ¹/

₃₂g

₁₆g

(inch)

Operating temperature

32°F to 104°F (0°C to 40°C)

Emergency alert messages via Cable are unreceivable.

The dimensional drawings are shown on the inside back cover.

• As part of policy of continuous improvement, SHARP reserves the right to make design and speciﬁcation changes for

product improvement without prior notice. The performance speciﬁcation ﬁgures indicated are nominal values of production

units. There may be some deviations from these values in individual units.

Download from Www.Somanuals.com. All Manuals Search And Download.

Speciﬁcations

Model:

Item

LC-60LE640U/LC-60C6400U

LC-52LE640U/LC-52C6400U

Size

LCD

60 Class (60 ¹/ Diagonal)

52 Class (52 ¹/ Diagonal)

₃₂o

panel

Resolution

TV-standard (CCIR)

VHF/UHF

2,073,600 pixels (1,920

1,080)

American TV Standard ATSC/NTSC System

VHF 2-13ch, UHF 14-69ch

CATV

1-135ch (non-scrambled channel only)

Function

Receiving

Channel

Digital Terrestrial

Broadcast (8VSB)

2-69ch

Digital cable^*1

(64/256 QAM)

1-135ch (non-scrambled channel only)

BTSC System

Audio multiplex

Audio out

10 W

HDMI 1

HDMI in with HDCP, Audio in (Ø 3.5 mm stereo jack), ARC

HDMI 2

HDMI in with HDCP

Audio out (Ø 3.5 mm stereo jack)

Photo/Music/Video mode, Software update

COMPONENT in

Back panel

vertical

inputs

HDMI 3

HDMI 4

AUDIO OUT

USB 1

COMPONENT

VIDEO 1

VIDEO 2

AV in

Back panel

surface

inputs

AV in

Terminals

ANALOG RGB (PC) in (15-pin mini D-sub female connector),

Audio in (Ø 3.5 mm stereo jack)

PC IN

RS-232C

ANT/CABLE

AUDIO IN

9-pin D-sub male connector

75 Unbalance, F Type

for Analog (VHF/UHF/CATV) and Digital (AIR/CABLE)

Audio in (Ø 3.5 mm stereo jack)

Back panel

horizontal

inputs

DIGITAL AUDIO

OUTPUT

Optical Digital audio output

Network connector

1 (PCM/Dolby Digital)

ETHERNET

USB 2

Photo/Music/Video mode, Software update

English/French/Spanish

OSD language

Power Requirement

Power Consumption

AC 120 V, 60 Hz

188 W (0.1 W Standby with AC 120 V) 150 W (0.1 W Standby with AC 120 V)

TV + stand

TV only

61.7 lbs./28.0 kg

56.2 lbs./25.5 kg

Weight

49.6 lbs./22.5 kg

Dimension^*2

TV + stand

TV only

54 ¹⁷

34 ¹¹

33 ¹/

13 ¹/

47 ⁹/

30 ²³

29 ³/

13 ¹/

₃₂g

2 ⁵⁹

₁₆g

₆₄g

2 ²⁷

₃₂g

(inch)

Operating temperature

32°F to 104°F (0°C to 40°C)

Optional Accessory

The listed optional accessory is available for the Liquid

Crystal Television. Please purchase them at your nearest

shop.

• Additional optional accessories may be available in the near

future. When purchasing, please read the newest catalogue for

compatibility and check the availability.

Part name

Wall mount

bracket

Model number

AN-52AG4

(for LC-70LE640U/LC-60LE640U/

LC-52LE640U/LC-70C6400U/

LC-60C6400U/LC-52C6400U)

Download from Www.Somanuals.com. All Manuals Search And Download.

Speciﬁcations

Wireless LAN

This TV has received the following certiﬁcations.

- Wi-Fi CERTIFIED™ (certiﬁcation program from the Wi-Fi Alliance^®)

- Wi-Fi Protected Setup™ (certiﬁcation program from the Wi-Fi Alliance^®)

FCC

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

(1) This device may not cause harmful interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation. Changes or modiﬁcations not expressly approved by the party responsible

for compliance could void the user’s authority to operate the equipment. To comply with the FCC RF exposure compliance

requirements, this device and its antenna must not be co-located or operated in conjunction with any other antenna or

transmitter.

The device for the band 5150-5250 MHz is only for indoor usage to reduce potential for harmful interference to co-channel

mobile satellite systems;

The maximum antenna gain permitted (for devices in the bands 5250-5350 MHz and 5470-5725 MHz) to comply with the e.i.r.p.

limit; and High-power radars are allocated as primary users (meaning they have priority) of the bands 5250-5350 MHz and

5650-5850 MHz and these radars could cause interference and/or damage to LE-LAN devices.

COFETEL

This equipment operates on a secondary basis and, consequently, must accept harmful interference, including from station of

the same kind, and may not cause harmful interference to systems operating on a primary basis.

CONTAINS TRANSMITTER MODULE COFETEL ID: RCPSHTW11-1252

Brand: SHARP

Model: TWFM-B005D

Speciﬁcation

Standard

IEEE 802.11a/b/g/n

2412-2484 MHz

5150-5850 MHz

Frequency Band

Static WEP (64/128 bit key Index 1 only)

WPA-PSK (TKIP)

Security

WPA2-PSK (AES)

DBPSK@1Mbps

DQPSK@2Mbps

[email protected]/11Mbps

BPSK@6/9 Mbps

Modulation

QPSK@12/18Mbps

16-QAM@24Mbps

64-QAM@48/54Mbps and above, Rx up to 300Mbps

Download from Www.Somanuals.com. All Manuals Search And Download.

Information on the Software License for This Product

Software composition

■

The software included in this product is comprised of various software components whose individual copyrights

are held by SHARP or by third parties.

Software developed by SHARP and open source software

■

The copyrights for the software components and various relevant documents included with this product that were

developed or written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties,

and other relevant laws. This product also makes use of freely distributed software and software components

whose copyrights are held by third parties. These include software components covered by a GNU General Public

License (hereafter GPL), a GNU Lesser General Public License (hereafter LGPL) or other license agreement.

Obtaining source code

■

Some of the open source software licensors require the distributor to provide the source code with the executable

software components. GPL and LGPL include similar requirements. For information on obtaining the source code

for the open source software and for obtaining the GPL, LGPL, and other license agreement information, visit the

following website:

http://www.sharpusa.com/gpl

We are unable to answer any questions about the source code for the open source software. The source code for

the software components whose copyrights are held by SHARP is not distributed.

Acknowledgements

■

The following are some of the open source software components included in this product:

• linux kernel/busybox/glibc/zlib/libpng/libjpeg/libiconv/DirectFB/OpenSSL/XMLRPC-EPI/mtd-utils/Expat/Qt/

U-Boot/PlayReady/AGG(ver2.3)/device-mapper/libfreetype/cURL/libxml2/lua/lua-xmlreader/lua-slncrypto/

Ffmpeg/SQLite/libzzip/c-ares/librt/libjanus/NTP

For the complete list, please see the URL above.

Software Copyrights

■

XMLRPC-EPI

libjpeg

SSLeay

Expat

Portions of this software are based in part on the work of the Independent JPEG Group.

This product includes cryptographic software written by Eric Young ([email protected]).

Contact: Nokia Corporation ([email protected])

PlayReady

This product contains technology subject to certain intellectual property rights of Microsoft. Use or

distribution of this technology outside of this product is prohibited without the appropriate lisense(s) from

Microsoft.

Content owners use Microsoft PlayReady^TMcontent access technology to protect their intellectual

property, including copyrighted content. This device uses PlayReady technology to access PlayReady-

protected content and/or WMDRM-protected content. If the device fails to properly enforce restrictions

on content usage, content owners may require Microsoft to revoke the device’s ability to consume

PlayReady-protected content. Revocation should not affect unprotected content or content protected by

other content access technologies. Content owners may require you to upgrade PlayReady to access

their content. If you decline an upgrade, you will not be able to access content that requires the upgrade.

Download from Www.Somanuals.com. All Manuals Search And Download.

Information on the Software License for This Product

libfreetype

libxml2

Lua

Lua-xmlreader

Lua-slncrypto

libzzip

c-ares

UPnP

Group 42

zlib

RSA Data Security

Fraunhofer IIS and Thomson Multimedia

MPEG Layer-3 audio compression technology licensed by Fraunhofer IIS and Thomson Multimedia.

You cannot use the MP3 compressed audio within the Software for real time or live broadcasts.

If you require an MP3 decoder for real time or live broadcasts, you are responsible for obtaining this

MP3 technology license.

Nellymoser, Inc

Speech compression and decompression technology licensed by Nellymoser, Inc.

Sorenson Media, Inc

Sorenson^TMSpark^TMvideo compression and decompression technology licensed from Sorenson Media,

Inc.

Sun Microsystem, Inc

ADPCM speech compression algorithm is used with the permission of Sun Microsystems, Inc.

NTP

Permission to use, copy, modify, and distribute this software and its documentation for any purpose

with or without fee is hereby granted, provided that the above copyright notice appears in all copies and

that both the copyright notice and this permission notice appear in supporting documentation, and that

the name University of Delaware not be used in advertising or publicity pertaining to distribution of the

software without speciﬁc, written prior permission. The University of Delaware makes no representations

about the suitability this software for any purpose. It is provided "as is" without express or implied

warranty.

cURL

Permission to use, copy, modify, and distribute this software for any purpose with or without fee is

hereby granted, provided that the above copyright notice and this permission notice appear in all

copies.

THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR

IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY, FITNESS

FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT OF THIRD PARTY RIGHTS. IN NO EVENT

SHALL THE AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR

OTHER LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING

FROM, OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN

THE SOFTWARE.

Except as contained in this notice, the name of a copyright holder shall not be used in advertising or

otherwise to promote the sale, use or other dealings in this Software without prior written authorization

of the copyright holder.

Download from Www.Somanuals.com. All Manuals Search And Download.

Information on the Software License for This Product

OpenSSL

LICENSE ISSUES

The OpenSSL toolkit stays under a dual license, i.e. both the conditions of the OpenSSL License and

the original SSLeay license apply to the toolkit.

See below for the actual license texts. Actually both licenses are BSD-style Open Source licenses. In

case of any license issues related to OpenSSL please contact [email protected].

OpenSSL License

Redistribution and use in source and binary forms, with or without modiﬁcation, are permitted provided

that the following conditions are met:

1. Redistributions of source code must retain the above copyright notice, this list of conditions and the

following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and

the following disclaimer in the documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgment:

This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit.

(http://www.openssl.org/)

4. The names OpenSSL Toolkit

and "OpenSSL Project" must not be used to endorse or promote

products derived from this software without prior written permission. For written permission, please

contact [email protected].

5. Products derived from this software may not be called

OpenSSL

nor may "OpenSSL" appear in

their names without prior written permission of the OpenSSL Project.

6. Redistributions of any form whatsoever must retain the following acknowledgment:

This product includes software developed by the OpenSSL Project for use in the OpenSSL Toolkit

(http://www.openssl.org/)

THIS SOFTWARE IS PROVIDED BY THE OpenSSL PROJECT AS IS" AND ANY EXPRESSED OR IMPLIED

WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY

AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE OpenSSL

PROJECT OR ITS CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL,

EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT

OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS

INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,

STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT

OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

This product includes cryptographic software written by Eric Young ([email protected]). This product

includes software written by Tim Hudson ([email protected]).

Original SSLeay License

This package is an SSL implementation written by Eric Young ([email protected]).

The implementation was written so as to conform with Netscapes SSL.

This library is free for commercial and non-commercial use as long as the following conditions are

aheared to. The following conditions apply to all code found in this distribution, be it the RC4, RSA,

lhash, DES, etc., code; not just the SSL code. The SSL documentation included with this distribution is

covered by the same copyright terms except that the holder is Tim Hudson ([email protected]).

package is used in a product, Eric Young should be given attribution as the author of the parts of the library used.

This can be in the form of a textual message at program startup or in documentation (online or textual)

provided with the package.

Redistribution and use in source and binary forms, with or without modiﬁcation, are permitted provided

that the following conditions are met:

1. Redistributions of source code must retain the copyright notice, this list of conditions and the following disclaimer.

2. Redistributions in binary form must reproduce the above copyright notice, this list of conditions and

the following disclaimer in the documentation and/or other materials provided with the distribution.

3. All advertising materials mentioning features or use of this software must display the following acknowledgement:

"This product includes cryptographic software written by Eric Young ([email protected])"

The word ‘cryptographic’ can be left out if the rouines from the library being used are not cryptographic related :-).

4. If you include any Windows speciﬁc code (or a derivative thereof) from the apps directory (application

code) you must include an acknowledgement:

This product includes software written by Tim Hudson ([email protected])

THIS SOFTWARE IS PROVIDED BY ERIC YOUNG AS IS AND ANY EXPRESS OR IMPLIED WARRANTIES,

INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR

A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE AUTHOR OR CONTRIBUTORS BE

LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES

(INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE,

DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,

WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN

ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.

The licence and distribution terms for any publically available version or derivative of this code cannot be changed.

i.e. this code cannot simply be copied and put under another distribution licence

[including the GNU Public Licence.]

Download from Www.Somanuals.com. All Manuals Search And Download.

Calling for Service

For location of the nearest Sharp Authorized Service, or to obtain product literature, accessories, supplies, or

customer assistance, please call 1-800-BE-SHARP.

LIMITED WARRANTY

CONSUMER LIMITED WARRANTY

SHARP ELECTRONICS CORPORATION warrants to the ﬁrst consumer purchaser that this Sharp brand Liquid Crystal Display product (the

“Product”), when shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option,

either repair the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the

purchaser for parts or labor for the period(s) set forth below.

This warranty does not apply to any appearance items of the Product or if the serial number or model number afﬁxed to the Product has

been removed, defaced, changed, altered or tampered with. This warranty does not cover installation or signal reception problems. This

limited warranty will not apply if the Product has been or is being used in a commercial setting or application; this warranty is meant solely

for the non-commercial, household use of the Product by consumers in their home or residence. If you intend to or already use this Product

for commercial purposes or in a commercial setting, there are warranties available to cover your use of this Product, the terms of which may

vary. Please contact 1-888-GO-SHARP for further information.

In order to enforce your rights under this limited warranty, you should follow the steps set forth below. You must be able to provide proof of

purchase to the servicer, which proof must include the date of purchase.

To the extent permitted by applicable state law, the warranties set forth are in lieu of, and exclusive of, all other warranties, express or

implied. Speciﬁcally ALL OTHER WARRANTIES OTHER THAN THOSE SET FORTH ABOVE ARE EXCLUDED, ALL EXPRESS AND

IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITY, FITNESS FOR USE, AND FITNESS FOR A PARTICULAR

PURPOSE ARE SPECIFICALLY EXCLUDED. IF, UNDER APPLICABLE STATE LAW, IMPLIED WARRANTIES MAY NOT VALIDLY BE

DISCLAIMED OR EXCLUDED, THE DURATION OF SUCH IMPLIED WARRANTIES IS LIMITED TO THE PERIOD(S) FROM THE DATE OF

PURCHASE SET FORTH BELOW. THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS

WHICH VARY FROM STATE TO STATE.

The warranties given herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive remedy

available to the purchaser and only for the time periods set forth herein. No other representations or promises made by anyone are

permitted. Correction of defects, in the manner and for the period of time described herein, shall constitute complete fulﬁllment of all

liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction of all claims,

whether based on contract, negligence, strict liability or otherwise. Sharp does not warrant nor shall Sharp be liable, or in any way

responsible, for Products which have been subject to abuse (including, but not limited to, improper voltage), accident, misuse, negligence,

lack of reasonable care, alteration, modiﬁcation, tampering, misuse, improper operation or maintenance or any damages or defects in the

Product which were caused by repairs or attempted repairs performed by anyone other than a Sharp authorized servicer. Nor shall Sharp

be liable or in any way responsible for any incidental or consequential economic or property damage. Some states do not allow limits on

warranties or on remedies for breach in certain transactions; in such states, the limits herein may not apply.

THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA AND PUERTO RICO.

Model Speciﬁc Section

Your Product Model Number & Description:

Warranty Period for this Product:

LC-80LE633U/LC-70LE640U/LC-60LE640U/LC-52LE640U/

LC-70C6400U/LC-60C6400U/LC-52C6400U LCD Color Television

(Be sure to have this information available when you need service for your

Product.)

One (1) year parts and labor from the date of purchase.

Additional Exclusions from

Warranty Coverage (if any):

In order for the Product to be serviced, the Product must be readily available

to the servicer, free and clear of any complex or non-standard installation,

mounting or other encumbrance which would unreasonably interfere with

servicing the Product. The Servicer will remount the Product after service,

provided that such remounting is not into a complex or non-standard installa-

tion. Any additional labor and materials required to remove and/or reinstall a

Product above and beyond the foregoing are not covered by this warranty,

may result in additional charges and are the responsibility of the consumer.

Image Retention resulting from a ﬁxed image being displayed for long

periods of time is not covered by this Limited Warranty (see Operation

Manual on how to prevent this).

Where to Obtain Service:

From a Sharp Authorized Servicer located in the United States. To ﬁnd the

location of the nearest Sharp Authorized Servicer, please call Sharp toll free

at 1-800-BE-SHARP.

What to do to Obtain Service:

Contact your Sharp Authorized Servicer to obtain in home service for this

product. The Servicer will come to your location and if necessary remove the

unit for repair at the Servicer’s facility and return the set to you once

completed. Be sure to have Proof of Purchase available.

TO OBTAIN PRODUCT INFORMATION OR PURCHASE ACCESSORIES AND EXTENDED WARRANTIES, CALL 1-800-BE-SHARP

OR VISIT www.sharpusa.com

Download from Www.Somanuals.com. All Manuals Search And Download.

Dimensional Drawings

Unit: inch (mm)

Unité: pouce (mm)

Unidad: pulgada (mm)

2 ³¹

3 ¹

₂(89)

3 ²⁹

₃₂(99)

₆₄(63)^*2

LC-80LE633U

73 ⁵

/₁₆(1862)

7 ¹

69 ⁴⁷₆₄(1771.20)^*1

(179)

29 ¹

₃₂(737)

₈(600)

17 ³

/₃₂(434)

23 ⁵

16 ³⁷

/₆₄(421)

LC-70LE640U/LC-70C6400U

2 ¹

₆₄(51)^*2

63 ¹⁹

/₃₂(1615)

3 ¹

₂(89)

5 ²³

60 ¹⁹₃₂(1538.88)^*1

(136)

21 ⁷

15 ³

₆₄(536)

13 ¹

/₈(333)

₄(400)

5°

5 ²⁵

7 ⁵⁹

(201)

(137)

8 ¹⁵

/₃₂(215)

AN-52AG4

Active area/Área activa/Zone active

Thinnest part/Parte más delgada/Partie la plus mince

Download from Www.Somanuals.com. All Manuals Search And Download.

Dimensional Drawings

Unit: inch (mm)

Unité: pouce (mm)

Unidad: pulgada (mm)

LC-60LE640U/LC-60C6400U

1 ⁷

₆₄(27.9)^*2

2 ⁵⁹

/₆₄(74)

54 ¹⁷

/₃₂(1385)

5 ³

52 ¹¹

₃₂(1329.12)^*1

(146)

21 ⁷

15 ³

₆₄(536)

13 ¹

/₈(333)

/₄(400)

5°

6 ²¹

4 ¹⁷

8 ¹⁵

/₃₂(215)

(115)

(169)

AN-52AG4

1 ³

₆₄(26.4)^*2

LC-52LE640U/LC-52C6400U

47 ⁹

/₁₆(1208)

2 ²⁷

/₃₂(72)

5 ⁴¹

45 ²³₆₄(1152.0)^*1

(143)

21 ⁷

/₆₄(536)

13 ¹

/₈(333)

15 ³

/₄(400)

5°

6 ¹⁷

4 ¹

8 ¹⁵

/₃₂(215)

(159)

(114)

AN-52AG4

Active area/Área activa/Zone active

Thinnest part/Parte más delgada/Partie la plus mince

Download from Www.Somanuals.com. All Manuals Search And Download.

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07495-1163

SHARP CORPORATION

Printed in Mexico

Imprimé au Mexique

Impreso en México

TINS-F419WJN1

12P03-MX-NM

Download from Www.Somanuals.com. All Manuals Search And Download.

Sharp Air Cleaner FU Y30J W User Manual
Sharp All in One Printer AR 205 User Manual
Sharp Calculator EL 310M User Manual
Shure Headphones ksm313 User Manual
Shure Microscope Magnifier SEK 2 User Manual
Sony Car Stereo System STR GX59ES User Manual
Sony DVD Player BDP S380 User Manual
Sony Indoor Furnishings SU RS51U User Manual
Sony Stereo Receiver STR DA3200ES User Manual
Subaru Robin Power Products Welder EHO25A User Manual