Sharp Flat Panel Television 13P04 PL NG User Manual

LC-39LE750E/V  
LC-50LE750E/V  
LC-39LE751E/K/V LC-50LE751E/K/V LC-60LE751E/K LC-70LE751E/K  
LC-39LU751E  
LC-39LE752E/V  
LC-39LM752E/V  
LC-39LK752E  
LC-39LX752E  
LC-39LE754E/V  
LC-50LU751E  
LC-50LE752E/V  
LC-50LM752E  
LC-50LK752E  
LC-50LX752E  
LC-50LE754E/V  
LC-60LU751E  
LC-60LE752E  
LC-60LM752E  
LC-60LK752E  
LC-60LX752E  
LC-60LE754E  
LC-70LE752E  
LC-70LE754E  
LCDTELEVIZOR U BOJI  
LCDTELEVIZOR U BOJI  
BARVNI LCDTELEVIZOR  
TELEWIZOR KOLOROWY LCD  
LCD SZÍNESTELEVÍZIÓ  
TELEVIZOR S BAREVNOU LCD OBRAZOVKOU  
TELEVÍZOR S FAREBNOU LCD OBRAZOVKOU  
PRIRUČNIK ZA RUKOVANJE  
UPUTSTVO ZA UPOTREBU  
PRIROČNIK ZA UPORABO  
INSTRUKCJA OBSŁUGI  
KEZELÉSI ÚTMUTATÓ  
NÁVOD K OBSLUZE  
NÁVOD NA OBSLUHU  
КОЛЬОРОВИЙ ТЕЛЕВІЗОР З  
РІДКОКРИСТАЛІЧНИМ ДИСПЛЕЄМ  
VÄRVILINE LCD-TELER  
ŠĶIDRO KRISTĀLU EKRĀNA (LCD)  
ІНСТРУКЦІЯ З ЕКСПЛУАТАЦІЇ  
KASUTUSJUHEND  
KRĀSUTELEVIZORS  
SPALVINIS LCDTELEVIZORIUS  
LIETOŠANAS ROKASGRĀMATA  
NAUDOJIMO INSTRUKCIJA  
ΕΓΧΕΙΡΙΔΙΟ ΛΕΙΤΟΥΡΓΙΑΣ  
KULLANMA KILAVUZU  
MANUAL DE UTILIZARE  
ДАПАМОЖНІК ПА ЭКСПЛУАТАЦЫІ  
OPERATION MANUAL  
ΤΗΛΕΟΡΑΣΗ ΜΕ ΕΓΧΡΩΜΗ ΟΘΟΝΗ LCD  
(ΥΓΡΩΝ ΚΡΥΣΤΑΛΛΩΝ)  
LCD RENKLİTELEVİZYON  
TELEVIZOR COLOR LCD  
ВАДКАКРЫСТАЛІЧНЫ КАЛЯРОВЫ ТЭЛЕВІЗАР  
LCD COLOUR TELEVISION  
NET+  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DivX®  
DivX Certified® to play DivX® video up to HD 1080p, including premium content.  
ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a subsidiary of Rovi Corporation. This  
is an official DivX Certified® device that plays DivX video. Visit divx.com for more information and software tools to  
convert your files into DivX videos.  
ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered in order to play purchased  
DivX Video-on-Demand (VOD) movies. To obtain your registration code, locate the DivX VOD section in your device  
setup menu. Go to vod.divx. com for more information on how to complete your registration.  
Covered by one or more of the following U.S. Patents:  
7,295,673; 7,460,668; 7,515,710; 7,519,274  
YouTube and the YouTube logo are trademarks of Google Inc.  
SPECIAL NOTE FOR USERS IN THE U.K.  
The mains lead of this product is fitted with a non-rewireable (moulded) plug incorporating a 13A fuse. Should  
the fuse need to be replaced, a BSI or ASTA approved BS 1362 fuse marked  
above, which is also indicated on the pin face of the plug, must be used.  
or  
and of the same rating as  
Always refit the fuse cover after replacing the fuse. Never use the plug without the fuse cover fitted.  
In the unlikely event of the socket outlet in your home not being compatible with the plug supplied, cut off the  
mains plug and fit an appropriate type.  
DANGER:  
The fuse from the cut-off plug should be removed and the cut-off plug destroyed immediately and disposed of in  
a safe manner.  
Under no circumstances should the cut-off plug be inserted elsewhere into a 13A socket outlet, as a serious  
electric shock may occur.  
To fit an appropriate plug to the mains lead, follow the instructions below:  
IMPORTANT:  
The wires in the mains lead are coloured in accordance with the following code:  
Blue: Neutral  
Brown: Live  
As the colours of the wires in the mains lead of this product may not correspond with the coloured markings  
identifying the terminals in your plug, proceed as follows:  
The wire which is coloured blue must be connected to the plug terminal which is marked N or coloured black.  
The wire which is coloured brown must be connected to the plug terminal which is marked L or coloured red.  
Ensure that neither the brown nor the blue wire is connected to the earth terminal in your three-pin plug.  
Before replacing the plug cover make sure that:  
If the new fitted plug contains a fuse, its value is the same as that removed from the cut-off plug.  
The cord grip is clamped over the sheath of the mains lead, and not simply over the lead wires.  
IF YOU HAVE ANY DOUBT, CONSULT A QUALIFIED ELECTRICIAN.  
Only for wireless USB adapter AN-WUD630  
• Compatible with IEEE 802.11 b/g/n  
• Wi-Fi Certified  
• Wi-Fi Protected Setup  
• USB 2.0  
Download from Www.Somanuals.com. All Manuals Search And Download.  
ENGLISH  
OPERATION MANUAL  
• The illustrations and the OSD in this operation manual are for explanation purposes and may vary slightly from the actual  
operations.  
• The examples used throughout this manual are based on the LC-39LE750E model.  
• The LC-39LE750E, LC-39LE751E/K, LC-39LE752E, LC-39LE754E, LC-50LE750E, LC-50LE751E/K, LC-50LE752E,  
LC-50LE754E, LC-60LE750E, LC-60LE751E/K, LC-60LE752E, LC-60LE754E, LC-70LE750E, LC-70LE751E/K,  
LC-70LE752E, and LC-70LE754E models are compatible with high definition broadcasts, H.264 compressed (MPEG4 H.264,  
MPEG4 AVC, MPEG4 AVC/H.264).  
Contents  
Connecting a USB device ............................................ 31  
Contents ....................................................................... 1  
TV menu options ..................................................... 32  
TV/List function............................................................ 32  
Video function............................................................. 34  
Audio/Radio function................................................... 35  
Photo function............................................................. 36  
USB/HOME MEDIA device compatibility .................. 36  
AQUOS NET+ function ............................................... 37  
Extras function ............................................................ 39  
Setup function ............................................................ 40  
Introduction ................................................................ 2  
Dear SHARP customer .................................................. 2  
Important Safety Precautions ....................................... 2  
Remote Control unit ..................................................... 3  
TV (Front view) .............................................................. 4  
TV (Side and rear view) ................................................. 4  
Preparation ................................................................. 5  
Supplied accessories ................................................... 5  
Attaching the stand unit ............................................... 5  
Optional accessory ....................................................... 5  
Fixing the TV on a wall................................................... 5  
Inserting the batteries ................................................... 6  
Using the remote control unit ....................................... 6  
Cautions regarding the remote control unit ................ 6  
Connecting external devices............................. 41  
Introduction to connections ......................................... 41  
HDMI connection ..................................................... 42  
Component connection ........................................... 42  
VIDEO connection ................................................... 42  
SCART connection .................................................. 43  
Speaker/amplifier connector .................................... 43  
Quick guide ................................................................. 7  
Initial installation overview ............................................. 7  
Before turning on the power ......................................... 8  
Inserting a CA Card ....................................................... 8  
Initial auto installation .................................................... 9  
Positioning / aligning DVB-T antenna .......................... 14  
HDMI devices ............................................................ 44  
Controlling HDMI devices using HDMI CEC................. 44  
HDMI CEC connection................................................ 44  
HDMI CEC menu ........................................................ 44  
Operating a HDMI CEC device.................................... 44  
Menu Operation ...................................................... 15  
What is the menu? ..................................................... 15  
Common operations ................................................ 15  
About the Guide Display........................................... 15  
Info display ............................................................... 15  
Operation with the TV panel control keys.................. 16  
Favourites.................................................................. 16  
Connecting a PC ..................................................... 45  
PC connection ............................................................. 45  
HDMI (DVI) connection.............................................. 45  
Analogue connection................................................. 45  
Adjusting the PC image automatically........................... 46  
Adjusting the PC image manually ................................. 46  
Multimedia/Network setup ................................ 47  
Network Setup ........................................................... 47  
Connecting to the network ........................................ 47  
Wired installation..................................................... 47  
Wireless installation................................................. 47  
Watching TV ............................................................. 17  
Daily operation ........................................................... 17  
Switching on/off ....................................................... 17  
Switching between digital, satellite and analogue  
broadcasts ............................................................. 17  
Changing channels .................................................. 17  
Selecting an external video source ............................ 17  
Selecting audio language.......................................... 17  
Subtitles .................................................................. 17  
EPG ........................................................................... 18  
EPG operation............................................................. 18  
Other EPG functions ................................................... 19  
Teletext ...................................................................... 20  
Using MHEG-5 application (UK only) .......................... 20  
USB REC function................................................... 49  
USB REC function ...................................................... 49  
USB REC (Video Recorder)....................................... 49  
Archive playback ...................................................... 49  
USB REC settings .................................................... 49  
Archive playback settings ......................................... 51  
TV viewing with time shift ............................................ 53  
Enjoying 3D Image Viewing .............................. 54  
Enjoying 3D image viewing ........................................ 54  
Viewing 3D images ..................................................... 54  
Recharging the 3D glasses battery............................... 55  
Display format for 3D and 2D images ......................... 56  
Troubleshooting - 3D images ...................................... 56  
Basic adjustment..................................................... 21  
TV set adjustments ..................................................... 21  
Picture settings.......................................................... 21  
Sound settings .......................................................... 21  
Stations settings........................................................ 22  
Control settings ......................................................... 24  
Software update via USB ......................................... 27  
Software update via Internet .................................... 27  
Multimedia/Network settings .................................... 28  
Connections settings................................................. 28  
Channel list .................................................................. 29  
Appendix .................................................................... 58  
Troubleshooting .......................................................... 58  
Information on the software license for this product .... 58  
Environmental Specifications ...................................... 58  
Specifications ............................................................. 59  
End of life disposal ..................................................... 60  
Trademarks ................................................................ 60  
Useful viewing options......................................... 31  
Selecting the picture format ........................................ 31  
Setting when using external devices ........................... 31  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Dear SHARP customer  
Thank you for your purchase of the SHARP LCD colour TV product. To ensure safety and many years of trouble-  
free operation of your product, please read the Important Safety Precautions carefully before using this product.  
Important Safety Precautions  
• Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a damp cloth to clean the product. Do  
not use liquid cleaners or aerosol cleaners.  
• Use a soft damp cloth to gently wipe the panel when it is dirty. To protect the panel, do not use a chemical cloth to clean  
it. Chemicals may cause damage or cracks in the cabinet of the TV.  
• Water and moisture—Do not use the product near water, such as a bathtub, washbasin, kitchen sink,  
laundry tub, swimming pool or in a wet basement.  
• Do not place vases or any other water-filled containers on this product. The water may spill onto the  
product causing fire or electric shock.  
• Stand—Do not place the product on an unstable trolley, stand, tripod or table. Doing so can cause  
the product to fall, resulting in serious personal injuries as well as damage to the product. Use only  
a trolley, stand, tripod, bracket or table recommended by the manufacturer or sold with the product.  
When mounting the product on a wall, be sure to follow the manufacturers instructions. Use only the  
mounting hardware recommended by the manufacturer.  
• When relocating the product placed on a trolley, it must be moved with utmost care. Sudden stops,  
excessive force and uneven floor surface can cause the product to fall from the trolley.  
• Ventilation—The vents and other openings in the cabinet are designed for ventilation. Do not cover or  
block these vents and openings since insufficient ventilation can cause overheating and/or shorten the  
life of the product. Do not place the product on a bed, sofa, rug or other similar surface, since they can  
block ventilation openings. This product is not designed for built-in installation; do not place the product in an enclosed  
place such as a bookcase or rack, unless proper ventilation is provided or the manufacturers instructions are followed.  
• The LCD panel used in this product is made of glass. Therefore, it can break when the product is dropped or impact  
applied. If the LCD panel is broken, be careful not to be injured by broken glass.  
• Heat sources—Keep the product away from heat sources such as radiators, heaters, stoves and other  
heat-generating products (including amplifiers).  
• Headphones—Do not set the volume at a high level. Hearing experts advise against extended listening at  
high volume levels.  
To prevent fire, never place any type of candle or naked flames on the top or near the TV set.  
To prevent fire or shock hazard, do not place the AC cord under the TV set or other heavy items.  
Do not display a still picture for a long time, as this could damage the LCD screen.  
There is always power consumption if main plug is connected. Be aware that only way to disconnect  
mains power from your TV is to unplug mains plug from the wall, it shall remain readily operable during  
use of your product.  
• Servicing—Do not attempt to service the product yourself. Removing covers can expose you to high  
voltage and other dangerous conditions. Request a qualified person to perform servicing.  
The LCD panel is a high technology product, giving you fine picture details.  
Due to the very large number of pixels, occasionally a few non-active pixels may appear on the screen as a fixed point of  
blue, green or red. This is within product specifications and does not constitute a fault.  
Precautions when transporting the TV  
When transporting the TV, never carry it by holding onto the speakers. Be sure to always carry the TV by two people holding  
it with two hands—one hand on each side of the TV.  
Cautions regarding use in high and low temperature environments  
• When the TV is used in a low temperature space (e.g. room, office), the picture may leave trails or appear slightly delayed. This  
is not a malfunction, and the TV will recover when the temperature returns to normal.  
• Do not leave the TV in a hot or cold location. Also, do not leave the TV in a location exposed to direct sunlight or near a heater,  
as this may cause the cabinet to deform and the LCD panel to malfunction.  
Storage temperature: -20 °C to e60 °C.  
Caution : DANGEROUS VOLTAGE INSIDE !  
TO PREVENT ELECTRIC SHOCK, DO NOT REMOVE COVER. NO-USER SERVICEABLE PARTS  
INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONAL.  
2
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
Remote control unit  
1
>a (Standby/On) (Page 17)  
T/S/V/U  
Not used.  
15  
16  
2
ATV  
FAV  
Open expanded station list.  
1
2
3
R >  
ATV/DTV/SAT: Exit the “Menu”  
screen.  
DTV  
Access digital TV mode.  
T NET (Page 37)  
SAT  
USB REC  
Access “AQUOS NET+” mode.  
Open expanded station list.  
RADIO  
4
5
Y p Channel information (Page 15)  
Display the station information  
(channel number, signal, etc.) on the  
screen.  
DTV/SAT: Switch between radio and  
data mode.  
When only data broadcasting  
(no radio broadcasting) is  
transmitted by DVB, the radio  
broadcasting will be skipped.  
Within MENU screen shows a hint  
about item selected.  
6
FAV  
Define active station as favourite.  
3
S/I/J/E/H (Pages 49 and  
53)  
Video/Music/USB REC files  
reproduction buttons.  
U b (AV selection) (Page 17)  
7
8
17  
18  
Select an input source.  
I Picture adjustment (Page 21)  
a SOURCE (Page 44)  
Operating HDMI-CEC device.  
Select picture settings.  
ECO (Page 21)  
9
10  
11  
19  
20  
4
5
USB REC (Page 49)  
Record a programme you are  
watching.  
Activate/deactivate low consumption  
mode (ECO).  
O m Teletext (Page 20)  
ATV: Display analogue teletext.  
DTV/SAT: Select MHEG-5 or teletext  
for DTV/SAT.  
TIME SHIFT/a/b  
Not used.  
12  
13  
14  
21  
F (Page 49)  
Pause.  
P :r/s  
ATV/DTV/SAT: Select the TV  
channel.  
NET: Scrolls pages up/down.  
6
Alphanumeric buttons 0_9  
Set the channel. Enter desired  
numbers. Set the page in teletext  
mode.  
• When the five Nordic countries  
(Sweden, Norway, Finland,  
Denmark or Iceland) are selected  
in the country setting from initial  
auto installation (Page 9), DTV  
services are four digits. When  
another country is selected, DTV  
services are three digits.  
22  
23  
24  
A EPG (Page 18)  
DTV/SAT: Display the EPG screen.  
S 6 Back  
ATV/DTV/SAT: Return to the previous  
“Menu” screen.  
NET: Return to the previous page  
(This may not function for some  
services).  
D Buttons for useful operations  
7
8
A (Flashback)  
Return to the previously selected  
channel or external input.  
[ Subtitle (Pages 17 and 20)  
Switch subtitle languages on/off.  
1 Shows clock  
7 (Sound mode) (Page17)  
Select a sound multiplex mode.  
3 Freeze/Hold  
Teletext: Stop updating teletext  
pages automatically or release the  
hold mode.  
f Picture format (Page 31)  
Change between different picture  
formats.  
within MENU screen.  
W 3D (Page 54)  
Select between 3D and 2D image  
viewing.  
F R/G/Y/B Colour buttons  
The coloured buttons are  
9
e (Mute)  
TV sound on/off.  
E a/b/c/d (Cursor)  
correspondingly used to select the  
coloured items on the screen (e.g.,  
EPG, MHEG-5, teletext).  
0 i+/- (Volume)  
Select a desired item.  
Increase/decrease TV volume.  
;
Q @  
Execute a command.  
ATV/DTV/SAT: Display “CH list” when  
no other “MENU” screen is running.  
Main menu screen on.  
Come back to last option selected  
Important information:  
Satellite services are only  
available for the LE752/754  
model series.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
Introduction  
TV (Front view)  
Illumination led*  
Input  
source  
button  
Menu  
button  
Power  
button  
Remote  
Control  
Sensor  
3D infrared  
emitter  
Programme (channel)  
buttons  
Volume  
buttons  
*TV indicator status (Page 17)  
TV (Side and rear view)  
18  
17  
1
16  
PC IN  
HDMI/PC  
ANALOG  
AUDIO  
2
SCART (AV  
/
RGB / S-VIDEO)  
INPUT  
SERVICE  
ANT  
SAT  
15  
14  
3
4
5
6
7
8
9
10  
11  
12  
13  
1
Analog AUDIO input for DVI and PC  
(Jack 3.5mm connector)  
PC Input  
COMPONENTS / AV terminals  
SERVICE connector (jack 3.5 mm)  
SCART (AV/RGB, Y/C Input) terminal  
HDMI 1 (HDMI/DVI/ARC)  
HDMI 2 (HDMI/DVI)  
9
Antenna input terminal  
15 HEADPHONES jack  
10 SAT (Satellite antenna input) (Only  
LE752 series)  
16 COMMON INTERFACE slot  
17 LAN terminal  
2
3
4
5
6
7
8
11 Digital Audio Output terminal (SPDIF)  
12 USB terminal (Wi-Fi use only)  
13 USB terminal (USB REC / MEDIA  
PLAYER / SOFTWARE / HDD READY  
/ 3D GLASSES BATTERY)  
18 AC INPUT terminal  
HDMI 3 (HDMI/DVI)  
14 HDMI 4 (HDMI/DVI)  
WARNING  
• Excessive sound pressure from earphones and headphones can cause hearing loss.  
• Do not set the volume at a high level. Hearing experts advise against extended listening at high volume levels.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation  
Supplied accessories  
Remote control unit  
• Operation manual (This publication)  
• WiFi adapter (x1) • Stand unit (x1)  
• “AAA” size battery (g2)  
(g1)  
• Cable tie (x1)  
Attaching the stand unit  
• Before attaching (or detaching) the stand, unplug the AC cord.  
• Before performing work, spread cushioning over the surface on which you will be laying the TV. This will prevent it  
from being damaged.  
CAUTION  
Attach the stand in the correct direction.  
Be sure to follow the instructions. Incorrect installation of the stand may result in the TV falling over.  
Inserting the stand  
Insert the stand into the openings on the bottom  
of the TV (Hold the stand so it will not drop from the  
edge of the base area).  
Insert and tighten the four screws into the four  
holes on the rear of the TV.  
Soft cushion  
NOTE  
To detach the stand unit, perform the above steps in reverse order.  
Optional accessory  
The listed optional accessories are available for this  
LCD colour TV. Please purchase them at your nearest  
shop.  
No.  
1
Part name  
Wall mount bracket  
3D glasses  
Part number  
AN-52AG4  
2
AN-3DG20-B  
• Additional optional accessories may be available in the  
near future. When purchasing, please read the newest  
catalogue for compatibility and check the availability.  
Fixing the TV on a wall  
This TV should be fixed on a wall only with the wall fix bracket available from SHARP (above table). The use of other  
wall fix brackets may result in an unstable installation and may cause serious injuries.  
Fixing the LCD colour TV requires special skills and should only be performed by qualified service personnel.  
Customers should not attempt to do the work themselves. SHARP bears no responsibility for improper fixing or  
fixing that results in accident or injury.  
You can ask qualified service personnel about using an optional bracket to fix the TV on a wall.  
To use this TV fixed on a wall, first remove the adhesive tape at the two locations on the rear of the TV, and then use the screws  
supplied with the wall fix bracket to secure the bracket to the rear of the TV.  
• When you fix the TV on a wall, you should attach the supporting post.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Preparation  
Inserting the batteries  
Before using the TV for the first time, insert the two supplied “AAA” size batteries. When the batteries become  
depleted and the remote control unit fails to operate, replace the batteries with new “AAA” size batteries.  
1
Open battery cover.  
2
Insert two supplied “AAA” size batteries.  
• Place batteries with their terminals corresponding to  
the (+) and (-) indicators in the battery compartment.  
3
Close the battery cover.  
CAUTION  
Improper use of batteries can result in chemical leakage or explosion. Be sure to follow the instructions below.  
• Do not mix batteries of different types. Different types of batteries have different characteristics.  
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of new batteries or cause  
chemical leakage in old batteries.  
• Remove batteries as soon as they have worn out. Chemicals that leak from batteries can cause a rash. If you find  
any chemical leakage, wipe thoroughly with a cloth.  
• The batteries supplied with this product may have a shorter life expectancy due to storage conditions.  
• If you will not be using the remote control unit for an extended period of time, remove the batteries from it.  
• When replacing the batteries, use zinc-carbon batteries instead of alkaline ones.  
Note on disposing batteries:  
The batteries provided contain no harmful materials such as cadmium, lead or mercury.  
Regulations concerning used batteries stipulate that batteries may no longer be thrown out with the household  
rubbish. Deposit any used batteries free of charge into the designated collection containers set up at commercial  
businesses.  
Using the remote control unit  
Use the remote control unit by pointing it towards the remote control sensor. Objects between the remote control  
unit and sensor may prevent proper operation.  
Remote control sensor  
°
°
Cautions regarding the remote control unit  
• Do not expose the remote control unit to shock. In addition, do not expose the remote control unit to liquids,  
and do not place in an area with high humidity.  
• Do not install or place the remote control unit under direct sunlight. The heat  
may cause deformation of the unit.  
• The remote control unit may not work properly if the remote control sensor of  
the TV is under direct sunlight or strong lighting. In such cases, change the  
angle of the lighting or the TV, or operate the remote control unit closer to the  
remote control sensor.  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick guide  
Initial installation overview  
Follow the steps below one by one when using the TV for the first time. Some steps may not be necessary  
depending on your TV installation and connection.  
1
2
3
Power on and  
run the auto  
installation  
Preparation  
Watch TV  
Connect an antenna cable to  
the antenna terminal (Page 8).  
Turn on the power using a on  
the TV (Page 17).  
Congratulations!  
If necessary, adjust the  
antenna to attain maximum  
signal reception (Page 14).  
Now you can watch TV.  
Run the initial auto installation  
(Page 9).  
Connect  
external devices  
Language, Energy  
Efficiency, country, antenna  
type settings, etc.  
If necessary, insert a CA  
card into the CI slot to watch  
scrambled broadcasts  
Connect external  
devices such as a  
DVD player/recorder  
as instructed (Pages  
41, 42 and 43).  
(Page 8.)  
Plug in the AC cord (Page 8).  
Product shape varies in some countries.  
Go to Next.  
Connect external  
audio devices such as  
speakers/amplifier as  
instructed (Pages 41,  
42 and 43).  
Start searching  
channels  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick guide  
Before turning on the power  
1
2
Carefully insert the CI  
Module in the CI slot  
with the contact side  
forward.  
The logo on the CI  
Module must be  
facing outward from  
the rear of the TV.  
Product shape varies  
in some countries.  
Standard  
DIN45325 plug  
(IEC 169-2) 75q  
coaxial cable.  
Place the TV close to the  
AC outlet, and keep the  
power plug within reach.  
Inserting a CA Card  
In order to receive coded digital stations, a Common  
Interface Module (CI Module) and a CA Card must be  
inserted in the CI slot of the TV.  
Checking CI Module information  
1
2
3
Press MENU and the “MENU” screen is shown.  
Press c/d to select “Extras” menu.  
Press c/d to select “CA module”, and then  
press OK.  
The CI Module and the CA Card are not supplied  
accessories. They are usually available from your  
dealers.  
Inserting the CA Card into the CI Module  
• The content of this menu depends on the provider of  
the CI Module.  
1
With the side with the  
gold coloured contact  
chip facing the side of  
the CI Module marked  
with the provider’s  
Module  
General information on CI Module displays.  
logo, push the CA Card  
into the CI Module as far as it will go. Note the  
direction of the arrow printed on the CA Card.  
Menu  
Adjustment parameters of each CA Card displays.  
Inserting the CI Module in the CI slot  
Enquiry  
2
Carefully insert the CI Module in the CI slot with  
the contact side forward. The  
logo on the CI Module must be  
facing outward from the rear of  
the TV. Do not use excessive  
force. Make sure the module is  
not bent in the process.  
You can input numerical values such as passwords here.  
NOTE  
The content of each screen depends on the provider of  
the CI Module.  
NOTE  
Make sure that the CI module is properly inserted.  
This menu is only available for digital stations.  
It takes about 30 seconds to certify the license key when you insert a CA card into the CI+ compatible CI module for the first  
time. This process may fail when there is no antenna input or you have never run “Auto installation”.  
The CI+ compatible CI module sometimes upgrades its firmware. You may not receive any TV images before upgrading. You  
can only use the power button during upgrading.  
The CI+ compatible CI module does not allow you to output any copy protected programmes using monitor out.  
If the TV displays an update confirmation message for the CA card while receiving CI+ compatible broadcasts, follow the  
screen prompts.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick guide  
5
Select broadcast settings.  
Press /to move between different tune type.  
Press OK to select the desired antenna.  
Initial auto installation  
When the TV is powered on for the first time after  
purchase, the initial auto installation wizard appears.  
Follow the menus and make the necessary settings one  
after another.  
Confirm the following before turning  
on the power  
E Is the antenna cable connected?  
E Is the AC cord plugged in?  
Cable analogue: analogue broadcast via cable/  
antenna.  
1
Press a on the TV.  
• The initial auto installation wizard appears.  
• The auto installation can also be called in the TV menu,  
see Repeat initial installation on page 40.  
DVB-T:  
DVB-C:  
DVB-S:  
Digital broadcast.  
Cable digital broadcast.  
Satellite broadcast. (Only 752/754 series)  
Proceed with J button.  
• The routine of the first installation wizard depends on  
the selected settings.  
6
Select subtitles and audio languages.  
Press a/b/c/d and OK to select the desired  
languages and alternative languages for subtitles  
and audio for DVB programmes.  
USB REC  
2
Setting the menu language.  
Press a/b/c/d to select the desired language.  
Proceed with J button.  
To set up audio commentary for the visually impaired, please  
see Audio commentary on page 25.  
Setting options for DVB-T reception  
If you have not selected DVB-T antenna in the antenna  
selection, continue with Setting options for DVB-C  
reception on page 10.  
Proceed with J button.  
Setting Energy Efficiency.  
Decide how efficiently you want to operate your TV  
set.  
7
Selecting tuner settings.  
3
Scrambled stations  
You can specify if coded stations are to be searched  
for in the search/update.  
Home Mode:  
The emphasis for home use is on low energy  
consumption.  
Select yes to save all scrambled stations.  
These stations can only be received in connection with a CI  
module and the appropriate CA Card.  
If a CI module with a CA Card is already inserted for the station  
search, all the stations which this module can descramble are  
also saved when no is selected.  
Shop Mode:  
The picture settings are aligned to operate in the  
presentation room. If the ambient brightness diminishes,  
the energy consumption is not reduced.  
Search method  
Select Frequency search if you want to run the  
station search independently of the channel grid.  
Accept logical channel number  
In various countries, digital stations are transmitted  
with a preset channel number per station, known as  
"Logical Channel Numbers" (LCN).  
If you select yes, these default channel numbers will  
be used and the channels will be sorted as per LCN.  
This setting can be changed later in the MENU  
ExtrasEnergy Efficiency.  
Proceed with J button.  
4
Selecting the TV location.  
Press ///to select your country or area.  
• This setting screen only appears during the initial auto  
installation.  
Proceed with J button.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick guide  
8
Supplying power to the antenna.  
NOTE  
The value of Frequency and Network ID should  
be set to the value specified by the cable provider.  
If you use a DVB-T antenna that requires a supply voltage  
and which is not supplied via a power adapter, then select  
yes (5V) for the antenna's power supply.  
Press J to continue.  
Setting options for DVB-S reception  
If you have not selected a DVB-S antenna in the  
antenna selection, continue with Settings for all types  
of reception on page 13.  
Press J button.  
How to align your DVB-T antenna is described on  
page 14.  
Select the satellite system.  
9
Continue with Settings for all types of reception  
(See page 13).  
Setting options for DVB-C reception  
If you have not selected DVB-C antenna in the  
antenna selection, continue with Setting options for  
DVB-S reception below.  
The normal DVB-C settings are derived from the  
selection of the location and do not need to be changed.  
Specify how you receive which satellite(s) (single  
satellite or type of satellite system). Ask your dealer in  
this regard.  
The normal DVB-S settings are derived from the  
selection of the location and do not need to be changed  
in most cases.  
Single satellite  
Press///tochangeeachitemtotheappropriate  
settings:  
Reception of a single satellite via a connected LNC  
(LNB). See page 11 for settings.  
Network selection  
2 satellites on 22kHz switchbox  
If several networks are available via DVB-C, you  
can decide which network you want to receive your  
channels from.  
Scrambled stations  
You can specify if coded stations are to be searched  
for in the search/update.  
Reception of two different satellites with two LNCs  
(LNBs) which are connected to the TV set by a 22  
kHz switchbox. See page 11 for settings.  
2 satellites on Toneburst switch  
Reception of two different satellites with two LNCs  
(LNBs) which are connected to the TV set by a  
toneburst switch. See page 11 for settings.  
Select yes to save all scrambled stations.  
These stations can only be received in connection with a CI  
module and the appropriate CA Card.  
If a CI module with a CA Card is already inserted for the station  
search, all the stations which this module can descramble are  
also saved when no is selected.  
Max. 4 satellites on DiSEqC multiswitch  
The TV set controls a DiSEqC multiswitch to which  
up to four LNCs (LNBs) for different satellites are  
connected. See page 11 for settings.  
DiSEqC one cable communal system  
Select setting if the TV set is connected to a DiSEqC  
single cable system (according to EN50494). Several  
satellite receivers can be connected to one satellite  
cable. See page 12 for settings.  
Search method  
If you select Frequency Search, a search is  
performed for all receivable stations. With Network  
Search, only the stations which the networks  
supply are searched, either for all receivable  
networks or only for the particular network specified  
under Network ID.  
Other communal installation  
Start Frequency  
Select this setting if the TV set is connected to a  
single-cable system (without DiSEqC). Several  
satellite receivers can be connected to one satellite  
cable. As opposed to a DiSEqC one cable system  
there are restrictions in the range of certain reception  
frequencies in common single-cable community  
systems. See page 13 for settings.  
The DVB stations are only searched for in the  
frequency range above the start frequency.  
Network ID  
Change this setting to register only the specified  
network ID.  
Accept logical channel number  
In various countries, digital stations are transmitted  
with a preset channel number per station, known as  
"Logical Channel Numbers" (LCN).  
Press J to continue  
If you select yes, these default channel numbers will  
be used and the channels will be sorted as per LCN.  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick guide  
Setting options for 2 satellites on 22kHz  
switchbox / 2 satellites on Toneburst switch  
Setting options for Single satellite  
Reception of a single satellite via a connected LNC  
(LNB).  
1
2
Select Satellite1/Satellite2  
1
Select satellite.  
Select satellite name from list and press OK.  
Press J to continue.  
Press J to continue.  
2
Select Dual Band (low/high) or Single Band.  
Here you specify if you use a Dual Band (Universal)  
LBN or Single LBN.  
3
Specify here the oscillator frequency for your LNB.  
Press J to continue.  
3
Specify here the oscillator frequency for your LNB.  
Normally you do not need to change the values  
for high and low band, unless the LNB of your  
satellite system uses a different oscillator frequency  
(important for the frequency display).  
4
Press OK to select frequency and press J to  
continue.  
See Setting options for all DVB-S reception on  
Normally you do not need to change the values  
for high and low band, unless the LNB of your  
satellite system uses a different oscillator frequency  
(important for the frequency display).  
If you use the setting Single Band in step Dual/  
Single Band, you only have to define the LNB  
frequency for the Low Band.  
page 13 to continue.  
Setting options for Max. 4 satellites on DiSEqC  
multiswitch  
Select DiSEqC multiswitch and adpat settings for this  
selection.  
4
Press J to continue.  
See Setting options for all DVB-S reception on  
page 13 to continue.  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick guide  
Repeat rate  
Setting options for DiSEqC one cable  
communal system  
The refresh rate determines how often a DiSEqC  
command is output. A refresh is only necessary with  
cascaded system.  
1
Select which DiSEqC single cable system you are  
using and press OK.  
Control voltage  
The control voltage controls the switch of the  
polarisation level (horizontal/vertical) in non-DiSEqC  
capable components (e.g., control of single LNBs  
via DiSEqC multiswitch).  
22kHz signal  
The 22kHz signal controls the switching between  
high and low band in the Band setting. The Position  
setting controls the selection of the satellites in non-  
DiSEqC capable components.  
Toneburst  
2
Select satellite name from list and press OK. Press  
J to continue.  
The Toneburst controls the selection of the satellites  
in non-DiSEqC but Toneburst capable components  
with the Position and Option settings.  
Press OK to adopt settings and press J to continue.  
1
Select Satellite1 to Satellite4.  
3
Specify here the oscillator frequency for your LNB  
and press OK. Press J to continue.  
2
Select satellite name from list and press OK. Press  
J to continue.  
Normally you do not need to change the values  
for high and low band, unless the LNB of your  
satellite system uses a different oscillator frequency  
(important for the frequency display).  
4
Select and adjust settings for DiSEqC single cable  
communal installation.  
3
Specify here the oscillator frequency for your LNB.  
Select the desired transmission channel and the  
corresponding transmission frequency.  
PIN protection  
If your system is designed for it, it is possible to  
protect your used transmission data from use by  
other subscribers with a PIN.  
Define/change PIN  
Here you can determine and change the PIN for  
PIN protection. Only possible when yes has been  
selected for PIN protection.  
Normally you do not need to change the values  
for high and low band, unless the LNB of your  
satellite system uses a different oscillator frequency  
(important for the frequency display).  
Continue with Setting options for all types of  
reception on page 13.  
See Setting options for all DVB-S reception on  
page 13 to continue.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick guide  
Scrambled stations  
Select yes to save all scrambled stations.  
Setting options for Other communal installation  
These stations can only be received in connection  
with a CI module and the appropriate CA Card.  
If a CI module with a CA Card is already inserted  
for the station search, all the stations which this  
module can descramble are also saved when no  
is selected.  
1
Select satellite.  
Search method  
If you select Frequency Search here, a search is  
performed for all receivable stations. With Network  
Search, from all receivable networks all the stations are  
searched which are supplied by these networks.  
Symbol rate  
The symbol rate is specified by the satellite provider and  
normally does not need to be changed.  
Accept Logical Channel Number  
This setting allows you to decide whether you want to  
accept the Logical Channel Number (LCN).  
Press J to continue.  
Press J to continue.  
2
Specify here the oscillator frequency for your LNB.  
If your set is connected to a single-cable system  
without external voltage supply, you can connect  
the antenna supply (13V or 18V / max. 450mA)  
with 13V or 18V.  
Continue with Setting options for all types of  
reception below.  
Setting options for all types of reception  
Age related lock  
Allows you to restrict programmes depending on the age  
classification.  
Continue with Setting options for DVB-S reception  
below.  
Setting options for DVB-S reception  
Network selection  
If several networks are available via DVB-S, you  
can decide which network you want to receive your  
The information about age classification is provided by  
the broadcasting station.  
The stations locked can only be watched after entering  
the access code (see page 24).  
channels from.  
Time and date  
Enter the correct values with the numeric buttons here.  
Settings  
Network configuration  
If several satellites are received, the following settings  
must be made for every satellite. The type of settings  
available may differ depending on the selected satellite  
or network.  
Here you can now specify if you wish to configure a  
network "Configure now" (see page 47) or you wish  
to configure it later "Do not configure or configure  
later".  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Quick guide  
Positioning / aligning DVB-T  
antenna  
If you install a DVB-T/T2/S/S2 antenna for the first time  
or relocate it, you should adjust the alignment of the  
antenna to receive a good reception while checking the  
antenna setup screen.  
In normal TV mode, without other displays, a DVB-T  
station is received and selected.  
1
2
3
Select Setup.  
Select Stations.  
Select Manual Scan TV.  
Position and align the antenna in such a manner that  
maximum values for C/N and Level are obtained.  
The value for BER should be as low as possible.  
4
Select Search and press OK to start search.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu operation  
What is the menu?  
• The MENU view is the central overview page for all of your TV's operating modes.  
• The list of options on the bottom of MENU view gives you acces to TV, Video, Audio/Radio, Photo and AQUOS NET+.  
• By means of Extras and Setup you have access to more functions and you can configure your TV set.  
• On the top of the screen you will find all stations marked as favourites.  
• The number of selectable items varies depending on the TV equipment, network connection, available media servers and  
connected devices.  
• The MENU can be operated with the remote control unit and with the TV panel control keys.  
Common operations  
FAV  
1
2
Display the menu  
screen  
Select an item  
USB REC  
Press MENU and the “MENU”  
Press a/b/c/d to select/adjust the  
desired menu, and adjust the item to  
the desired level, and then press OK.  
Press 6 to return to the previous  
MENU page.  
screen displays.  
E Selecting in the menu  
E Selecting options  
3
Exit the menu  
screen  
The operation will exit the "MENU"  
screen if you press END.  
NOTE  
MENU options differ in the selected input modes, but the operating procedures are the same.  
The screens in the operation manual are for explanation purposes (some are enlarged, others cropped) and may vary slightly from  
the actual screens.  
Info display  
About the Guide Display  
The Guide Display at the bottom of the screen shows  
the menu bar.  
The info display provides an info text appropriate to the  
on-screen display that can assist you further with the  
operation of your TV set.  
Temporary info display (p)  
The factory setting is that the info display is hidden. It  
can be displayed temporarily by pressing p key.  
In the initial installation you will see an info text for  
operations with the OSD.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Menu operation  
Permanently display or hide the  
automatic info display  
Favourites  
You will find your favourites on the top of the MENU  
screen.  
You can create favourites in the operating modes of the  
TV set. In this way you get your preferred stations on a  
single overview page.  
After an initial installation, TV stations will already be  
automatically created as favourites independent of the  
installation site of the TV set.  
The automatic info display can be hidden/shown via a  
menu setting.  
1
Press @ to call menu view.  
2
With ///select Setup and press OK to call  
settings.  
3
4
5
With /select Control and press OK.  
With /select more and press OK.  
With /select On-screen displays and press  
OK to call settings.  
Creating favourites  
You can define the current station as favourite by means  
of your remote control.  
The favourite will be added to MENU view and placed  
at the end.  
1
Press FAV to create a favourite.  
If there are more favourites than can be shown on one  
page, this will be indicated by rectangular symbols  
below favourites in the MENU view.  
6
7
With /select Automatic info and select Off/  
On to hide/show the info display.  
Press OK to adopt settings.  
Manage favourites  
You can edit the existing favourites in MENU view.  
Change the sequence of your favourites as you wish or  
delete favourites you do not need any more.  
Operation with the TV panel  
control keys  
2
3
4
Press MENU to call MENU view.  
With ///select the favourite to be changed.  
Press FAV to move or delete.  
This function is useful when there is no remote control  
unit within your reach.  
1
Press MENU to show/hide a menu for direct  
control on TV.  
2
3
Press CHr/s to scroll left/right.  
Press b(#) to open a new menu level or  
accept the settings  
NOTE  
5
Press 6to end.  
The “MENU” screen will disappear if left unattended for  
several seconds.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching TV  
Daily operation  
Switching on/off  
Changing channels  
With 0–9:  
With Pr/s:  
Turning on/off the power  
Press a on the TV to switch it on.  
Switch it off by pressing a on the TV.  
Selecting an external video source  
NOTE  
When turning off the power  
using a on the TV, EPG  
Once the connection is made, press b to display  
the “AV selection” screen, and then press c/d to  
switch over to the appropriate external source with  
OK.  
data will be lost.  
The terminal layout may differ  
depending on the model.  
Standby mode  
E Switching to standby mode  
If the TV is switched on (BLUE LED), you can switch it  
to standby by pressing TVa on the remote control unit.  
E Switching on from standby  
From standby (RED LED), press TVa on the remote  
control unit.  
Selecting audio language  
FAV  
E DTV/CADTV/SAT mode:  
Each time you press 2 the audio language switches  
between audio sources available.  
NOTE  
Selectable languages vary depending on the received  
broadcasts.  
TV indicator status  
LED indicator  
Off  
Status  
Power off  
E ATV mode:  
Each time you press 2, the mode switches as shown  
in the following tables.  
Blue  
Power on  
Red  
Standby  
NICAM TV broadcasts selection  
Violet  
StandBy with USB REC programmed  
Signal  
Selectable items  
Stereo  
Bilingual  
Monaural  
NICAM STEREO, MONO  
NICAM CH A, NICAM CH B, NICAM CH AB, MONO  
NICAM MONO, MONO  
A2 TV broadcasts selection  
Selectable items  
STEREO, MONO  
CH A, CH B, CH AB  
MONO  
NOTE  
If you are not going to use this TV for a long period of time,  
be sure to remove the AC cord from the AC outlet.  
A small amount of electric power is still consumed even  
when a is turned off.  
Signal  
Stereo  
Bilingual  
Monaural  
E Switching off the TV and connected  
additional devices  
By long pressing on TVa the TV and all CEC capable  
devices connected to the HDMI interfaces switch to  
standby mode. See page 44 for more information.  
NOTE  
When no signal is received, the audio mode will display  
“MONO”.  
Switching between digital, satellite  
and analogue broadcasts  
Subtitles  
E DTV/CADTV/SAT mode:  
Press [ button to enable/disable the subtitles.  
To see how to change between different languages go  
to Control settings on page 24.  
E Press “ATV”, “DTV”, "SAT" or "RADIO" to  
change between modes.  
FAV  
E ATV mode:  
The available subtitles according to the broadcasting  
will be enabled or disabled by pressing [ button.  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching TV  
EPG  
EPG is a programme list that is displayed on the screen. With the EPG, you can check the schedule of digital  
channels, view detailed information about it, tune to an event currently on-air and set a timer for future events.  
The first time you press EPG, a wizard will start that guides you through the necessary presettings.  
You can find the EPG settings in the MENU SetupControlmore...EPG  
EPG operation  
E Display/Close the EPG screen  
Press EPG button. Switch EPG on/off.  
The first time you press EPG, a wizard will start that guides you through the  
necessary presettings. In the EPG wizard you decide for which station EPG data  
should be collected and displayed. We recommend to select only those stations  
which you receive regularly.  
U
V
S
You can find the EPG settings in the Setup.  
T
In the left column of the screen there is a list of stations of your currently active station list  
(personal list, overall station list). With the on-screen buttons in the header of the EPG you can select the day of  
the programme preview and filter the programmes as to their genre.  
E Select a program  
Select the time span  
-Press c/d to select the time span you want to search, press  
OK.  
• Continue to press d to display programs in the next time span.  
Select the desired program  
-Press a/b to select the desired program, press OK.  
• If a or b are displayed on the left of the programs, continue to press  
a/b to display next or previous screen.  
-Press END to exit out of EPG.  
E Adapting the EPG overview  
The options to be selected are in the header. If not, press BLUE key.  
You can filter the programmes with genre selection in the header. The programme of the selected genre will be  
highlighted:  
Movies  
News  
Show  
Sports  
Child  
Arts  
Social  
Education  
Hobby  
Series  
Music  
- Press /to select day or genre.  
- Press OK to confirm selection  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching TV  
E Timer programming  
Other EPG functions  
YoucanprogrammetimerrecordingsofTVprogrammes.  
E Calling additional information about the  
1
2
Press ///to select the programme.  
programmes  
Press USB REC button to programme timer  
recording for the TV programme. Timer data  
dialogue is opened.  
1
2
Press ///to select the programmes.  
Press p.  
If there is more information on the selected programme,  
it will be indicated here.  
3
Check the timer data and update it if necessary.  
Programme information  
In the EPG a recording symbol E is placed avobe the  
title of the programme.  
View: Watch selected programme.  
The menu item is only available when the selected  
programme is on the air.  
Memorise: Memorise the programme for later  
watching/listening.  
This menu is only available when the selected  
programme has not yet started.  
Delete memo: For programmes being memorised  
you can also delete the memo.  
Timer: Call up the overview of the timer services.  
E(Recording): Schedule the recording of the  
selected programme for a time.  
3
Press 6 to return to EPG.  
E Memorising a programme via the EPG  
For memorised programmes, the TV set will ask at the  
beginningofaprogrammeifitshouldchangethechannel  
accordingly or switch on from the standby mode if this  
is activated in the SetupControlmoreEPGTV  
on when memorised.  
1
2
3
Select the program which you want to memorise.  
Press p.  
With ///select Memorise, and press OK.  
4
Press 6 to return to EPG.  
In the EPG a memorise symbol is placed avobe  
the title of the programme.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Watching TV  
Buttons for standard teletext operations  
Teletext  
Buttons  
Pr/s  
Description  
What is Teletext?  
Standard teletext  
Increase or decrease the page number.  
Colour (R/G/  
Y/B)  
Page selection:  
Red: Back to the previously viewed  
page.  
Teletext broadcasts pages of information and  
entertainment to specially equipped TVs. Your TV  
receives teletext signals broadcast by a TV network,  
and decodes them into graphical format for viewing.  
News, weather and sports information, stock exchange  
prices and programme previews are among the many  
services available.  
Green: On to next page.  
Yellow: To next topic.  
Blue: To next range of topics.  
The coloured bars (for TOP) or the  
coloured text (for FLOF) in the second  
last line indicate which coloured buttons  
you can use to page through topic areas  
and topics.  
Turning Teletext on/off  
1
Select a TV channel or external source providing  
a teletext programme.  
0–9  
Teletext page displays:  
0: Stop updating teletext pages  
automatically or release the hold  
mode.  
2
Press m to display the Teletext.  
• Many stations use the TOP operating system, while  
some use FLOF (e.g. CNN). Your TV supports both  
these systems. The pages are divided into topic groups  
and topics. After switching on the teletext, up to 2,000  
pages are stored for fast access.  
9: Enlarge page (press several times).  
Additional page selection:  
Directly select any page from 100 to 899  
by using the numeric buttons.  
• Select  
switches as shown below.  
• If you select a programme with no teletext signal, “No  
Teletext available” is displayed.  
• The same message is displayed during other modes if  
no teletext signal is available.  
on the screen and press OK, the screen  
//OK  
Mark desired page number.  
With OK call the page.  
p
Call overview page 100.  
Select it on the screen and press OK to  
update the teletext page.  
Show hidden information on the TXT  
page.  
Hide information on the TXT page again.  
Call Standard Teletext menu  
Teletext  
Teletext  
Other teletext menu functions  
Select  
on the screen and press OK.  
Special pages  
Preview pages  
Input of the first teletext programme preview page if  
this deviates from the factory setting.  
HbbTV Text  
Pressing m twice will display the HbbTV-Text.  
HbbTV text is offered by the selected channel.  
Navigation within the HbbTV text and how the coloured  
buttons are assigned may vary depending on the  
provider.  
Sub-title pages  
Input of the teletext subtitle pages for every station if  
this deviates from the factory setting.  
Character set  
Teletext character set can be switched to other  
languages (Russian, Greek, Polish and Turkish).  
Using the MHEG-5 application  
(UK only)  
NOTE  
Teletext will not work if the selected signal type is RGB.  
If HbbTV is offered by the channel, then the Media Text/  
HbbTV text opens up. In this case, pressing m again opens  
the "standard" teletext/videotext.  
Some services bring you programmes with the MHEG  
application encoded, letting you experience DTV/  
CADTV interactively.  
When provided, the MHEG-5 application will start  
when you press m.  
NOTE  
MHEG may not be displayed in 3D mode.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic adjustment  
TV set adjustments  
Picture settings  
Move Picture up/down  
With some picture formats the text or graphic displays  
at the bottom or on top are not (or only partially) visible.  
At this adjust you can move the picture up or down with  
cursor keys to make the displays visible.  
Active backlight  
Automatic backlight adjustment according to the video  
content in order to improve the image contrast.  
1
2
Press MENU.  
Select SetupPicture, the next screen appears:  
Film quality improvement (DMM)  
Reduces jolt in rapid picture object movements and  
rolling txt displays. It especially applies for movies.  
Choose among different options.  
Digital Noise Control (DNC)  
With this adjustment you can eliminate or reduce picture  
noise.  
Choose among different options.  
Skin tone  
Adjusts the skin tones between purple and greenish.  
3
Select the picture adjustment you want to adjust:  
3D  
You can enjoy 3D-supported images on the TV when  
you wear 3D glasses (AN-3DG20-B), sold separately.  
See more details on page 54.  
Picture adjustment  
You can switch between three fixed picture setting  
variants and the three personal picture values:  
StandardECODynamicUser  
Deblocking filter  
To minimise the visible interference to the picture caused  
by modern compression methods this adjustment can  
be activated. It counteracts this interference.  
Contrast  
The brighter the environment the higher the contrast  
should be set.  
PC IN display  
Brightness  
For some PC Image formats, horizontal as well as  
vertical position and the phase position of the image  
can be corrected. See page 45.  
This menu appears only when a PC is connected via  
PC-IN terminal.  
Set the brightness until the black areas of the picture  
appear just black.  
Colour intensity  
Set the colour intensity to suit your personal taste. The  
colours should appear natural.  
Backlight  
Adjusts the screen brightness. You can dim or brighten  
the screen.  
Sound settings  
1
2
Press MENU.  
Select SetupSound, the next screen appears:  
Picture format  
Changes between different picture format:  
16:9, 4:3, Panorama1, Panorama 2, Zoom  
See page 31.  
more...  
3
Select the sound adjustment you want to adjust:  
Sound adjustment  
You can adapt preset sound characteristics of the  
respective broadcast:  
Off, Speech, Classical, Pop, Custom music sound and  
Custom film sound.  
Colour temperature  
Adjusts the colour temperature to give the best white  
image:  
Intensive Normal Soft  
Loudness  
Sharpness  
Proper boost of bass and treble tones at low volume.  
Surround sound  
Allows you to enjoy surround sound.  
Adjusts the picture sharpness to obtain the best  
definition.  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic adjustment  
more...  
Automatic scan TV+Radio  
In this adjustment, with the search wizard, you can  
search/update new stations.  
The current search settings will be displayed. If you  
want to change these search settings:  
Select Change search settings, press OK and wizard  
will ask you for search settings.  
If you agree with these settings, select Start search/  
update and press OK to start scan.  
NOTE  
You have to repeat the initial installation (see page 9) and  
automatically search new ones, if you want to delete all  
existing stations.  
Headphone volume  
Adjust the headphone volume.  
Auto volume  
Reduces volume differences (for advertisements that  
are too loud)  
Manual Scan TV  
If you want to adapt the parameters of an existing  
station, first select the appropriate station.  
AV output signal  
1
Select Manual Scan TV and press OK, the next  
screen appears:  
Allows you to indicate which sound is output via the  
AV socket for dual sound programs: Sound1 (e.g. main  
language), sound 2 (e.g. foreign language) or sound  
1+2 (both simultaneously).  
NOTE  
Selectable items vary depending on the received broadcasts.  
Maximum volume  
Determines the maximum volume that can be set.  
Maximum switch on volume  
Allows you to specify the volume that the TV is set when  
switched on with the mains switch.  
Balance  
Set stereo balance so that the volume impression is  
identical on the left and right.  
Clear Voice  
If Clear Voice is activated, the sound of the current  
programme is automatically output with optimum  
comprehensibility when speech is detected.  
2
Select the menu item Signal source to decide in  
which area you want to search for stations.  
Depending on the selected source, various setting  
possibilities will be available.  
Select Search to start search for next station.  
Select Store to save station.  
3
4
NOTE  
Only stations for the selected signal source can be saved,  
SPDIF mode  
which do not already exist in the station list.  
Allows you to choose between PCM or Dolby Digital  
audio output.  
Status bar for manual search  
Status bars are displayed for manual search, which  
show the reception quality of the individual stations  
during the station scan. The markers in all bars  
should preferably be in the green area.  
Stations settings  
In this item you can find all settings concerned with  
station search for TV and DVB radio as well as functions  
for creating and editing the various stations list.  
1
2
Press MENU.  
Select SetupStations, the next screen appears:  
C/N: (Carrier/Noise) The bar shows the signal to  
noise ratio. The value indicated in dB should be  
preferably high.  
Level: The bar shows the receiving level of the  
station. The value displayed in dBµV should be  
preferably high.  
BER: (Bit Error Rate) The bar shows the bit error  
rate of the station. The value for BER should be as  
low as possible.  
3
Select the station adjustment you want to adjust:  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic adjustment  
Explanations of some search settings  
-Restore stations  
Signal source: Selection of range in which you  
1
2
3
With ///select the beginning of block.  
Press OK to mark.  
With ///select the end of block. Press  
OK to mark.  
With ///select Restore stations and  
press OK to restore block. (Select Cancel  
process to cancel restore).  
want to search for the station.  
TV stand: If necessary, ask your dealer which  
standard to select for specific channels or AV  
equipment.  
Colour standard: If necessary, ask your dealer  
which standard to select for specific channels or AV  
equipment.  
DVB-T  
Shows available stations to move, delete and rename  
stations in the (all) list:  
-Add/remove stations  
-Move stations  
Channel: Direct entry of channel.  
Frequency: DVB-T/C: Direct input of station frequency.  
Range for entry: 044.75 MHz - 859.25 MHz.  
DVB-S: Direct input of LNC frequency.  
Name: the name of the found station is displayed.  
You can change the name of the station.  
-Delete list  
-Rename list  
New personal list  
It is possible to compose personal lists to suit  
your convenience. It is possible to create up to six  
personal lists.  
Symbol rate: You can specify the symbol rate.  
DVB-S: Range: 1000-45000.  
Manual Scan Radio  
-Adding stations to Personal list  
The manual search for radio stations is similar to  
TV stations search. Please see Manual Scan TV  
explanation.  
1
2
Select New personal list and press OK. A  
new personal list (x) will be created.  
x number depends on how many lists were  
already created.  
Station lists TV  
With/select Personal list x and press  
OK to open (list does not contain any station  
yet).  
In this menu you can edit (delete block, move block)  
various lists. You can also create and edit new personal  
lists.  
3
4
Press to open function list.  
Overall station list  
You can delete and move station blocks.  
With /select Add/Delete Stations in the  
function list and press OK to activate.  
With ///select the stations you want  
to add to the favourite list and press OK.  
5
The new stations will be added at the end of the  
favourite list.  
6
Press END to close station list.  
-Deleting stations from Personal list  
1
2
3
With/select Personal list x and press  
OK to open.  
With /select Add/Delete Stations in the  
function list and press OK to activate.  
With ///select the station to be  
deleted and press OK to delete.  
-Delete Block  
4
Press END to close station list.  
1
2
3
With ///select the beginning of block.  
Press OK to mark.  
With ///select the end of block. Press  
OK to mark.  
Select Execute delete and press OK to  
delete block. (Select Cancel process to  
cancel delete).  
-Move/reorder stations in Personal list  
1
2
3
4
With/select Personal list x and press  
OK to open.  
With /select Move stations in the  
function list and press OK to activate.  
With ///select the station to be  
moved and press OK to mark.  
-Move block  
With ///select insert position and  
press OK to move.  
1
2
3
4
With ///select the beginning of block.  
Press OK to mark.  
With ///select the end of block. Press  
OK to mark.  
With ///select insert position. Press  
OK to confirm insert position.  
With ///select Execute move and  
press OK to move block. (Select Cancel  
process to cancel move).  
5
Press END to close station list.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic adjustment  
-Renaming Personal list  
Parental lock  
This function allows you to use a password to lock  
certain programmes and adjustments.  
1
2
3
With/select the personal list you want to  
rename and press OK to open.  
With/select Rename list in the function  
list and press OK to activate.  
Enter new name using an on-screen keyboard  
or remote control (as with keypad of a mobile  
phone).  
4
Press OK to confirm new name.  
-Delete Personal list  
1
With/select the personal list you want to  
delete and press OK to open.  
With ///select Delete list and press  
OK to confirm.  
1
Define a four digit access code (PIN) the first time  
you open it.  
Select Confirm and press OK to activate.  
The new PIN must be entered and confirmed  
again.  
2
2
3
List deletion is irrevocable.  
Station lists Radio  
The Stations list Radio procedure is the same as  
that of Stations list TV. Please see Station List TV  
explanation.  
The Parental lock menu will be opened:  
Update station list automatically  
The channel list will be updated automatically if Allow  
is selected.  
Control settings  
1
2
Press MENU.  
Select SetupControl, the next screen appears:  
Lock all stations  
The TV set is locked immediately. All programmes  
can only be watched after entering the access code.  
The lock can be activated Immediately or for a Daily  
defined period.  
The lock remains active until it is deactivated.  
Lock single stations  
You can lock/unlock individual or all the stations in  
the station list.  
The lock remains active until it is deactivated.  
Age-related lock  
Some broadcasting stations provide information  
about age classification. If the age set here is below  
the broadcast age limit, the programme can only be  
watched after entering the access code.  
3
Select the control adjustment you want to adjust:  
Language  
Allows you to specify the language for all menus in the  
TV set. Also the language can be set for DVB subtitles  
and the film language.  
Change access code  
You can change the access code at any moment.  
Enter the new access code in place of the old one.  
Menu  
Deactivate  
You can change the menu language.  
Subtitle (DVB)  
All set parental locks are cancelled. The current  
secret code is deleted. When the parental lock is  
reactivated, all the previous parental locks are set  
again automatically.  
If subtitles are provided by DVB station, you can set  
here your desired language. If it is available in the  
station, it will be shown automatically.  
You can also specify an alternative language in case  
your chosen language is not offered by the station.  
Audio (DVB)  
Reset  
All currently set parental locks are finally cancelled.  
The secret code is deleted.  
Select your desired film language. If it is available in  
the station, it will be shown automatically.  
You can also specify an alternative language in case  
your chosen language is not offered by the station.  
Energy efficiency  
Determine how energy efficient your TV set shall be by  
choosing between: Home Mode Shop Mode. See  
pages 9 and 21.  
Software  
This option allows you to have the TV software version  
always updated. You can download new software from  
different sources:  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic adjustment  
Summer/winter  
Set it to yes if you want to activate automatically  
summer time.  
Beginning of daylight-saving time  
Enter the date on which the time is switched over  
to summer time if it deviates from the automatically  
calculated date.  
Software update  
Via USB  
Current software version can be downloaded from  
the SHARP Internet site and installed on your TV  
using a USB memory.  
Via Internet  
The software update wizard appears.  
End of daylight-saving time  
Enter the date on which the summer time ends if it  
deviates from the automatically calculated date.  
DVB settings  
You can make general presettings for DVB stations.  
Subtitle mode  
You can preset whether a subtitle is always to be  
displayed as soon as it is offered by the station. A  
special subtitle for impaired hearing can also be  
selected.  
Via antenna  
The software update wizard appear.  
See page 27 for more information.  
NOTE  
The file system of USB memory must be FAT32.  
The USB memory must have only one partition.  
If in doubt, the USB memory should be formatted  
as "FAT32" without "extended attributes".  
A broadband connection and Network setup are  
required to update the software using the internet.  
NOTE  
more...  
Subtitles are not offered by all stations. Many  
stations only broadcast subtitles by teletext.  
DVB character set  
Select the DVB character set so that the title of the  
broadcast of your favourite received station or the  
texts of your CI module are displayed correctly.  
Audio commentary  
You can activate a special sound for viewer with  
impaired vision.  
EPG  
EPG is a programme list that is displayed on the screen.  
With the EPG, you can check the schedule of digital  
channels, view detailed information about it, tune to an  
event currently on-air and set a timer for future events.  
Also recordings can be programmed.  
Station selection  
Here you can determine for which station in the  
programme guide information is to be displayed.  
Data capture  
Here you can switch the data entry for the electronic  
program guide (EPG) on or off.  
If the data capture is switched on, your TV set tries  
to update the data base overnight or, if required, two  
minutes after switching to stand-by mode. The TV set  
must be on stand-by for this and not switched off at  
the mains switch.  
The indicator on the TV set lights yellow during data  
capture in stand-by mode.  
The data is also updated while you are watching the  
EPG station.  
TV on when memorised  
When yes is selected, the switched off TV switches  
on automatically in standby mode at the beginning  
of a memorised programme. A screen message  
appears when switching on. If this is not confirmed  
within 5 minutes with the OK button, the TV switches  
off again automatically for safety reasons.  
On-screen displays  
You can select different settings which affect the on-  
screen displays.  
Display time  
You can adjust the duration of the display.  
Volume display  
You can set whether or not the change in the volume  
should be displayed visually on the screen.  
Automatic info  
Here you can activate/deactivate the additional help  
in the screen while navigating the menu.  
Permanent clock display  
The time can be displayed permanently. It is always  
visible as long as no other display is activated.  
Automatic HDMI-CEC hint  
If this option is activated, a message about the  
adapted function of the remote control is shown  
whenever you switch over to an HDMI port position to  
which a HDMI-CEC compliant device is connected.  
Time and date  
Allows you to enter the time and date manually.  
Time  
Enter the time with the numeric buttons of the remote  
control.  
Deviation from Universal Time  
The current time at the Greenwich Meridian 0º is to be  
understood as world time. The time shift in relation to  
this time must be given in hours (with the /in the  
TV and OK button of the remote control).  
USB REC  
Is possible to adjust the USB REC to your requirements.  
Date  
Notify hidden sections  
Enter the date with the numeric buttons of the remote  
control.  
If an entry has been hidden in an archive recording  
(see page 52) you can be informed by a screen  
message when skipping a hidden area, by selecting  
yes.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic adjustment  
Jump distance  
Set the standard jump distance (in minutes) used for  
jumping forwards or backwards in the recording.  
Smart jump  
Activate or deactivate Smart Jump function (see  
page 52).  
Recording subtitles  
HbbTV mode  
Enable/disable this function.  
If this item is enabled, when a selected programme  
offers HbbTV service it will be seen on screen. Just  
press the requested key to activate.  
Then, the picture list of available services will appear.  
Follow the broadcaster instructions.  
Allows you to select whether subtitles are to be  
recorded in continuous operation for DVB stations.  
See page 50 for more information.  
Standard Teletext  
This TV set supports the two operating systems TOP  
Text and FLOF. Up to 2,000 pages are stored so that  
you have quick access.  
Special pages  
Preview pages: You can input the first teletext  
programme preview page if this deviates from the  
factory setting.  
Subtitle pages: Input of the teletext subtitle pages  
for each station if this deviates from the factory  
setting .  
Character set  
Teletext character set can be switched to other  
languages: Russian, Greek, Polish and Turkish.  
Start behaviour of HbbTV stations  
If HbbTV mode is activated you can specify if  
a available HbbTV application should be loaded  
automatically() after the channel has been  
changed or if this should only occur manually(?).  
After loading the HbbTV application, an on screen  
instruction is displayed (depending on the channel  
that is being viewed).  
HbbTV (Hybrid Broadcast Broadband TV)  
YoucanalsochoosebetweenStartallautomatically  
or Start all manually.  
Some broadcasters bring you access to new services  
from entertainment providers such as broadcasters,  
online providers, including catch-up TV, video on  
demand (VoD), interactive advertising, personalisation,  
voting, games and social networking.  
This function requires internet connection through the  
ETHERNET or the Wi-Fi adapter AN-WUD630.  
See Multimedia/Network on page 47 for more  
information.  
Functions of the m key  
It is possible to choose between watch Standard  
teletext or HbbTV.  
See page 20 for more information.  
Standard teletext first  
If this option is selected, with HbbTV function  
enabled, it will show standard teletext.  
HbbTV first  
If this option is selected, with HbbTV function  
enabled, it will show HbbTV text.  
HbbTV text is offered by the selected channel.  
Navigation within the HbbTV text and how the  
coloured buttons are assigned may vary depending  
on the provider.  
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic adjustment  
The next screen will appear:  
Recording  
It is possible to set a pre-record and post-record time  
for timer recordings made without auto time control  
(DVB).  
This minimises the risk that a part of broadcast is not  
recorded due to the broadcast starting earlier and/or  
finishing later.  
The software version that is currently installed is  
displayed.  
6 Press V button to proceed. The TV searches for  
a new software file on the USB stick.  
If a new software version is available after the  
search, a message appears:  
New software Vx.xx  
7 Press V button to start loading the new software.  
Or press END to end the wizard (the software will  
not be updated).  
The updated percentage appears.  
8 To make your TV completely ready for use again,  
please switch it off and on with the mains switch.  
Hard disks  
Format external one  
Software update via Internet  
It is possible to re-format the hard disk in order to  
solve some problems or to delete all data stored on it.  
Select this option to start formatting.  
Formatting the hard disk will erase all data stored  
on it.  
DivX® VOD  
If an Internet connection is available, new software can  
be downloaded directly and installed in the TV set.  
1 Press @ button.  
2 With /select Setup and press OK.  
3
Select Control  
Update Via Internet.  
message regarding data protection will be  
Software  
Software  
DivX® VOD Register  
To activated this option you need to register the  
file and reproduce it in TV.  
A
displayed.  
DivX® VOD Deregister  
Displays the deactivation code necessary to wite off  
4 If you do not agree with data protection message,  
please press G to exit. If you agree, please press  
V to continue.  
The version of the software that is currently installed  
will be displayed.  
5 By pressing V the TV connects to the Internet  
and scans the update server for new software.  
If a new software version is available, a message  
appears.  
6 Press V to start loading the new software.  
If you want to end the wizard, please press END.  
7 To make your TV completely ready for use again,  
please switch it off and on with the mains switch.  
Software update via USB  
It is possible to update the software on your SHARP TV.  
1
2
Add the binary file to USB memory root.  
Insert the memory in any USB side TV set  
socket.  
Press @ button.  
With /select Setup and press OK.  
3
4
5
Select Control Software Software  
Update Via USB.  
NOTES  
Please do not switch off the TV by the mains switch  
during software updating.  
The total programming process can take up to 50 minutes  
in total.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic adjustment  
Connections settings  
Multimedia / Network settings  
1
2
Press MENU.  
Select SetupMultimedia/Network, the next  
screen appears:  
1
2
Press MENU.  
Select SetupConnections, the next screen  
appears:  
3
Select the option you want to adjust:  
3
Select the connection you want to adjust:  
Network settings  
Antenna DVB  
Allows you to make settings for DVB-T antenna and call  
the antenna wizard for the DVB-S antenna.  
With this option you can make settings to your network  
adapters and the various types of media.  
Networking  
Antenna DVB-S  
The network wizard starts that guides you through all  
necessary settings to your network.  
The antenna wizard starts guiding you through all  
the settings relevant to the DVB-S antenna. The  
settings of the DVB-S antenna wizard are explained  
in the procedure of initial installation (see page 10).  
Antenna DVB-T  
Allows you to set whether your DVB-T antenna needs  
a supply voltage.  
Antennas with an integrated amplifier need a supply  
voltage on the antenna line. In this case select Supply  
voltage 5V and confirm with OK.  
Otherwise, select No supply voltage and confirm  
also with OK.  
See page 47 for more information.  
AV connecting settings  
In this menu the parameters for the AV and AVS  
connection sockets can be adapted.  
Device at connection AV  
Indicate here whether a device is connected and, if  
so, which one is connected to the AV socket.  
Reset to factory settings  
All network settings are reset to factory defaults.  
Host name  
Give your TV set a name so that it can be identified  
in the network.  
Proxy server  
Do the settings for using a proxy server. The proxy  
server wizard will be shown.  
See page 47 for more information.  
Multimedia settings  
Here you find some settings for Audio.  
Auto return to music player  
The music player will reappear whenever another  
dialogue, e.g., music selection is called during play-  
back, and no keys are pressed for the set time period.  
You can specify when and after which time the music  
player reappears (selection options are: no, after 1  
min, after 5 min).  
Choose between: No device, DVD player, DVD  
recorder, Video recorder, Sat receiver, SetTopBox and  
Other equipment.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic adjustment  
AV standard  
Allows you to set the AV standard of the connected  
device to AV or AVS.  
Normally you leave the setting to Automatic. If the  
standard of the connected device is not detected  
automatically, you can select the correct standard.  
Channel list  
Selecting the channel  
you want to watch  
NOTE  
1 Press OK and the list of tuned channels will be  
Ask your dealer or consult the operating manual of the  
connected device if necessary.  
displayed.  
2 Use /to select the channel you want to watch  
and press OK.  
Signal type  
Allows you to set the signal type of the device  
connected to AV or AVS.  
Allow switching voltage  
If this function is activated, the video and audio of  
an external device connected to the AV connector  
(not in AVS) will be automatically reproduced on all  
TV broadcast sites when reproduction is started up,  
provided that the external unit supplies a switching  
voltage.  
HDMI-CEC  
Here you can make further settings for comfortably  
linking external devices to the TV sets.  
Remote TV switch on via HDMI-CEC  
Here you can select whether the TV set is to switch  
on automatically from standby mode, if HDMI-CEC  
capable devices connected to a HDMI input start  
playback or display a screen menu.  
You can watch overall station list or a personal list of  
channels by pressing .  
HDMI-CEC functionality  
You can allow or forbid the automatic communication  
between the TV set and linked external devices.  
Channel information display  
(DVB-T /DVB-C only)  
You can display the channel information that you are  
watching at this moment by pressing p on the remote  
control unit.  
In the left lower corner you can see the number and  
name of the channel, the transmission time and (if  
available) the title of the current programme. The  
bar (if available) indicates the progress of the current  
programme.  
In the right lower corner, the programme info is displayed  
additionally for DVB channels.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Basic adjustment  
Symbol explanations in the channel  
info  
General symbols:  
Language/sound selection available  
Subtitles available  
Channel selection for multi-channel providers  
3D mode  
HDTV programme  
HbbTV mode available from this station  
Transmitted audio signal:  
0RQR  
Mono audio transmission analogue  
Dual channel sound transmission (Sound1  
/Sound2) analogue  
Dual channel sound transmission (Sound1  
/Sound2) digital  
ꢀꢁꢀ  
Stereo sound transmission analogue  
Stereo sound transmission (HEAAC)  
Stereo sound transmission digital (PCM)  
Dolby digital sound transmission (DD)  
Dolby digital sound transmission (DD+)  
Dolby digital AAC+ sound transmission  
(HEAAC)  
03(*  
3/,,  
MPEG sound transmission  
Dolby Pro Logic II sound transmission  
Dolby Virtual Speaker Reference display  
Dolby Virtual Speaker Wide  
Transmitted audio channels:  
DD mono  
DD MPEG 2.0  
DD
DD
DD
DD
DD
DD
DD
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Useful viewing functions  
Selecting the picture format  
Setting when using external  
devices  
Selecting the picture  
format manually  
Source list  
For selecting the input type of external equipment.  
You can select the picture format. The selected picture  
format varies depending on the type of signal received.  
• If no (colour) image is displayed, try changing to  
another signal type.  
1 Press f on the remote control unit to change  
between different kinds of pictures.  
Check the operations manual of the external  
equipment for the signal type.  
Sizes for SD Signal (Standard Definition)  
16:9: Proportionally correct display of 16:9  
Connecting a USB device  
broadcasts.  
4:3:  
Proportionally correct display of 4:3  
broadcasts.  
Connect a USB or hard disk device to the TV as shown  
below.  
Panorama 1: Proportionally correct display of 4:3  
broadcasts on the 16:9 screen. Station logo  
and subtitles remain visible.  
Panorama 2: Format filling display (factory default) of  
4:3 broadcasts on the 16:9 screen. Station  
logo and subtitles remain visible.  
Zoom: Proportionally correct display. Maximum  
picture zoom. Displayed text may get lost.  
Sizes for HD Signal (High Definition) HDMI  
• Depending on the USB device, the TV may not be  
able to recognise the contained data.  
4:3 TV:  
Proportionally correct display of 4:3 or  
16:9 broadcasts. You select this mode  
when the signal is not supplied by a PC  
(normal case). A small part of the picture  
is truncated. This may be necessary to  
hide possible interference at the edge of  
the picture, which arises from the signal  
supplied.  
16:9 TV:  
• Use only alphanumeric characters for naming files.  
• File names over 80 characters (may vary depending  
on character set) may not be displayed.  
• Do not disconnect a USB device or memory card from  
the TV while transferring files, using the slide show  
function, when a screen is switching to another or  
4:3 PC: Proportionally correct display of 4:3  
16:9 PC:  
before you exit Video, Music or Photo menus.  
or 16:9 broadcasts without loss of  
information. Select this mode when the  
signal is supplied by a PC.  
• Do not connect and disconnect a USB device from  
the TV repeatedly.  
4:3 Zoom: Proportionally correct display. Maximum  
16:9 Zoom:  
picture zoom. Displayed text may get lost.  
NOTE  
Some items do not appear depending on the type of  
received signal.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV menu options  
Search  
TV/List function  
This allows you to do targeted searches for stations.  
The station name is to be entered via the on-screen  
keyboard.  
This function contains settings and additional options.  
The function list can be opened directly in TV mode or  
via the station list.  
All sources  
You can specify whether the stations from all sources  
or only from individual sources/reception networks  
(DVB-C, DVB-S, DVB-T, analogue) shall be indicated.  
Via station list:  
1
2
3
Press OK on R/C.  
Select station and press OK.  
Press. The next screen appears:  
All stations  
You can specify if all stations, only HD stations, locked  
stations, scrambled stations, unscrambled stations,  
CI+ protected stations, newly found stations or  
stations that cannot be found from selected sources  
shall be indicated.  
Language/sound  
Language/ sound selection.  
The sound formats on offer and their designations  
depend on the programme being broadcast.  
Subtitles  
Subtitle selection.  
The subtitles available depend on the programme being  
broadcast.  
Channel/Video  
This option only appears if there are more than one  
video components available.  
4
Select the station you want to adjust through  
Overall station list or Personal list and press .  
In TV mode:  
1
2
3
Press MENU on R/C.  
Select TV and press OK.  
Select the station you want to adjust and press.  
The next screen appears:  
Recording  
You can programme timer recordings on the TV set  
for USB Recording, or for recorders that are otherwise  
connected. The recording wizard is integrated for  
programming a recording.  
4
Select the adjustment you want to adjust.  
Expanded station list  
Open expanded station list.  
Manual recording:  
Programme the recording manually.  
Current programme:  
Record currently watched programme.  
Menu item will only be indicated when EPG data is  
available for the current station.  
Following programme:  
Record following programme.  
Menu item will only be indicated when EPG data is  
available for the current station.  
Recording via EPG:  
Using the on-screen buttons on the bottom line of the  
expanded station list it is possible to filter and sort the  
station list by various combinations of options.  
Programme recording of  
a
programme via the  
electronic programme guide (EPG).  
0..9  
Allows you to sort stations numerically.  
A..Z  
Allows you to sort stations alphabetically.  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV menu options  
Open USB REC archive  
Opens the USB REC archive. See USB REC  
explanation.  
Detailed information  
When you are watching TV, pressing p button twice,  
the next screen will appear:  
Detailed info  
Shows detailed info of current station.  
See page 49 for more information.  
Sound Settings  
See Sound adjustments on page 21.  
If there is more information on the selected programme,  
it will be indicated here. You find further information on  
the indicated programme in the bottom line.  
Headphone volume  
Adjust the headphone volume for current station.  
Picture settings  
See Picture adjustments on page 21.  
Move picture up/down  
With some picture formats the text or graphic displays  
at the bottom or on top are not (or only partially) visible.  
At this adjust you can move the picture up or down with  
cursor keys to make the displays visible.  
View  
Watch selected TV programme/ listen to selected  
radio programme.  
The menu item is only available when the selected  
programme is on the air.  
Memorise  
Memorise the programme for later watching/  
listening.  
Favourite  
Press OK on R/C to add current station as favourite to  
This menu is only available when the selected  
programme has not yet started.  
MENU view.  
Sorting  
Delete memo  
Allows you to sort stations numerically or alphabetically.  
For programmes being memorised you can delete  
the memo.  
Edit station list  
This menu is only available when there are  
programmes memorised.  
In this menu you can edit (delete block, move block)  
various list. For more information see Stations list TV  
on page 23.  
Timer  
Shows the overview of Timer Services (See page  
50).  
(Recording)  
Schedule the recording of the selected programme  
for a time.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV menu options  
This TV allows you to playback multimedia contents  
(photos, music files, videos) that are saved on a USB  
stick and on your home network and are made available  
via a media server. You may also access the internet  
and reproduce photos, music and video files.  
You can connect your TV to your home network via  
wired Ethernet or by a Wireless connection.  
Buttons  
Description  
G/J (short)  
Jump backwards/forward.  
When playing videos from Media  
Home: Stop playback and return to the  
media browser.  
From time-shifted television: time  
offset finish and switch back to the live  
image.  
H button  
See page 47 for TV Network setup.  
In archive playback: Stop playback and  
return to the USB archive.  
Video function  
I button  
Play the reproduction.  
G
Backwards. Pressing again changes the  
speed.  
Press MENU button on the R/C and select Video, to  
access the video files.  
J
Fast forwards. Pressing again changes  
the speed.  
F button  
Play / Pause the reproduction.  
MENU button  
f button  
Shows the menu to adjust the video  
image during reproduction.  
Performs ZOOM operation in films and  
videos.  
Symbols on the screen for video reproduction  
Symbols  
Description  
Video mode  
Repetition (continuous playback) all video  
files of the current folder/directory.  
Reproduces films and videos.  
Continuous playback of the current file.  
Shows information about current playback.  
Call function list video settings.  
1 Select Video menu and press OK.  
2 Pressing /buttons you can change between  
different reproduction sources: USB REC archive,  
or USB/DLNA.  
USB REC archive: recordings made with USB  
REC.  
Change video playback formats.  
USB/DLNA: files from USB or your home network  
Press OK to select the device from which you want  
to reproduce the files.  
hh:mm  
Skip to desired position in the reproduction.  
3 Select the file you want to reproduce with /►  
buttons and press OK to start the reproduction.  
Symbols on the screen for USB REC archive  
reproduction  
Symbols  
Description  
Activate/deactivate current playback file  
repetition.  
Set/delete manual bookmarks.  
Jump to next/previous bookmark.  
Shows information about current playback  
Call function list video settings.  
Call video edit menu.  
4 Press H to finish the reproduction.  
5 Press END to exit the Video mode.  
Buttons for video reproduction mode  
USB REC  
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV menu options  
Audio/Radio function  
Symbols on the screen for radio reproduction  
Symbols  
Description  
Music files from your local servers and USB storage  
media as well as DVB and Internet radio, can be found  
in the section Audio/Radio. The individual sub-items are  
described below.  
Shows the EPG details for current  
programme.  
Call function list audio settings.  
Switch off the screen.  
Audio mode  
DVB/Online radio  
The TV set can receive digital radio stations via DVB.  
1
2
Press MENU button on the R/C, select Audio/  
Radio on the menu and press OK.  
Pressing /buttons select USB/DLNA and  
press OK.  
USB/DLNA  
This option gives you access to music files from your  
personal storage media, e.g. from storage media  
connected via USB, and from media servers in your  
home network to which your TV set is connected.  
Symbols on the screen for audio file reproduction  
Symbols  
Description  
Activate/deactivate current playback file  
repetition.  
USB REC  
Repetition (continuous playback) all audio  
files of the current folder/directory.  
Random playback of the audio files of a  
folder.  
Buttons for audio reproduction  
Access detailed information about the file  
being played.  
Buttons  
H button  
Description  
End reproduction and return to the music  
selection.  
Call function list audio settings.  
Switch off the screen.  
F button  
Play / Pause the reproduction.  
I (short) button Play / Stops the reproduction.  
G (short)  
button  
DVB radio:  
Select the previous channel.  
USB storage or Home network:  
Go to the top of the track being played,  
jump/select previous track.  
J (short)  
Select next station/track.  
G (long)  
Only USB storage or Home network:  
Backwards. Pressing again changes the  
speed.  
J (long)  
Only USB storage or Home network:  
Forwards. Pressing again changes the  
speed.  
EPG  
Only DVB radio:  
Shows DVB radio programme guide.  
Radio mode  
1
2
Press MENU button on the R/C, select Audio/  
Radio on the menu and press OK.  
Pressing /buttons select DVB radio and  
press OK.  
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV menu options  
Photo function  
USB / HOME MEDIA device  
compatibility  
USB 2.0/3.0  
device  
USB Memory, USB card reader, USB  
HDD (Mass Storage class)  
Photo mode  
File system  
USB Media Player: FAT / FAT32 / NTFS  
You can reproduce photos with JPEG (*.JPE, *.JPG),  
and PNG format on your TV.  
Several kinds of reproduction are possible.  
Home Media  
(DLNA)  
DLNA 1.5 DMP  
(Digital Media Player certified)  
Photo file  
format  
JPEG, PNG  
1
2
Select Photo menu and press OK.  
Pressing button select USB/DLNA.  
Press OK to select the device from which you  
want to reproduce the files.  
Select the file you want to display on full screen  
with /buttons and press OK to start the  
viewing.  
Music file  
format  
Mpeg 1 (Layer 1 & L2), MP3  
Sampling frequency: 8Khz, 11.025 Khz,  
12Khz, 16Khz, 22.050Khz, 32Khz, 44.1  
Khz, 48 Khz  
3
AAC (MP4), WAV (PCM), WMA, AC3  
Sampling frequency:32Khz, 44.1 Khz,  
48 Khz  
There is a function list for the selected photo:  
Multimedia  
Container  
TS (Transport Stream), MOV, MP4,  
MKV, MPG (MPEG2 Programme  
Stream), WMV, ASF, AVI, DivX, FLV,  
VOB  
Video file  
format  
MPEG1, MPEG2, MPEG4, DivX, XVid,  
AVC/H.264, VC-1, Divx311 (SD Only)  
Full screen  
Display the photo on full screen.  
NOTE  
Progressive format jpeg files are not supported.  
Music files in USB 1.1 devices may not be played properly.  
Operation using USB hubs is not guaranteed.  
The external hard disc with capacity exceeding 1TB cannot  
be detected correctly.  
Slide show  
Start photo slideshow in the selected directory.  
Sorting  
Sort photos in alphabetical order, file size or  
date.  
Cables used to prolong the USB device must be certified  
as USB 2.0.  
Settings  
Shows audio settings.  
Select the desired option and press OK.  
In USB devices, video files may not be played properly if  
there is not enough speed.  
Playing non-standard encoded files is not guaranteed.  
The file extension does not uniquely specify a file's contents.  
It is very common for Internet files to have a mismatch  
between the file extension and its contents; for this reason  
some files could not be played on this TV set.  
4
Symbols  
Description  
Rotate photo 90º to the left.  
Rotate photo 90º to the right.  
Start slideshow.  
Pause slideshow  
Detailed information on the displayed  
photo.  
Shows function list with photo settings.  
H
Stop full screen/slideshow photo and  
return to photo selection.  
Previous photo display.  
Next photo display.  
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV menu options  
AQUOS NET+ function  
+
Operations in AQUOS NET  
Basic Operation  
The illustrations on this page are for explanation  
purposes. They are subject to change without notice.  
+
E
Display the AQUOS NET screen  
+
Press NET on remote control or select AQUOS NET  
+
on main menu to open AQUOS NET home page.  
+
AQUOS NET option allows you to access to AQUOS  
+
NET feature and Internet browser.  
For this option it is necessary that the TV set is  
connected to Internet (See page 47).  
1
Press @ button, select AQUOS NET+ and  
press OK. The next screen appears:  
+
AQUOS NET screen is organised into 8 areas:  
AQUOS NET+ title banner  
User-defined Favorites  
Recommended Apps  
Interactivewindowsfordirectbrandcommunications  
or maintenance functions  
Media window  
Widget Area-real-time functions like date and time  
2
Press > to exit.  
or similar  
Sharp Service Center  
Interactive Search window  
What is AQUOS NET+?  
E
Select a service  
AQUOS NET+ is the feature that allows our Internet  
connected TV sets to easily reproduce digital media  
content coming from the Network. It provides access to  
Internet services (Internet browser, YouTube, Facebook  
and much more)  
+
On AQUOS NET screen use///to select the  
desired service, and then press OK to start it.  
• Press 6 to return to the previous page.  
You can also use "Search" utility to find specific services,  
related to a search term.  
+
AQUOS NET provides a variety of services for each  
Select "Search" and press OK to access the  
search page or start typing to directly search to  
specific terms.  
country.  
NOTES  
+
As AQUOS NET is an online system, it can be modified  
• T  
o search for a specific keyword, the word is  
over time to better serve its purpose.  
entered using the virtual keyboard (1). The search  
is executed by clicking Start Search (2). The history  
of tthe last search terms can be found on the right  
side (3).  
+
Some AQUOS NET services may be added, changed or  
discontinued after some time.  
Even in opern web-mode, users cannot download and save  
files or install plugins.  
DISCLAIMERS  
SHARP Corporation bears no responsibility regarding  
the content and quality of the content provided by the  
content service provider.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV menu options  
Apps can be re-arranged by the user:  
Move the cursor to the application that shall be moved.  
2Use Yellow color key to enter arrange-mode.  
3Move selected service to the desired position and  
press the yellow color key again to confirm the new  
position.  
To dismiss an application from the favorite Apps, place  
the cursor on the respective app and press the RED  
color-key on the remote control.  
After searching for a specific term, the results are  
categorized by their type (1), including the number  
of search results. Categories can be hidden and  
expanded on request by selecting the close button  
(2) in the results overview.  
Resting the cursor on a search result will bring up a  
preview overlay (3) with information of the selected  
content.  
1
E
Exit AQUOS NET+ screen  
Press MENU button and select TV to return to tv mode.  
You can also press ATV, DTV, SAT or RADIO button  
to exit.  
NOTES  
When connecting the TV to the Internet, a message which  
requests a software update may be displayed in some  
cases.  
Some services can request to the user to Login or create a  
personal account. In this case, please follow the indication  
on the screen.  
E
User sections  
The Home Screen is devided in 3 functional areas:  
PREMIUM Video-on-Demand (VOD) services are available  
in some countries.  
The illustrations on this page are for explanation purposes.  
They are subject to change without notice.  
AQUOS NET+ screen language is adapted to the TV set  
language previously selected.  
While AQUOS NET+ is active some TV menus or options  
could be disabled.  
Advance Operation  
AQUOS NET+ uses alphanumerical characters within  
some services, which can be introduced using the  
remote numerical keys, in a similar way that people  
use a mobile phone keypad. In order to make this  
task easier, the LE750 is ready to use an external USB  
keyboard (USB wired, USB-to-Wireless or USB-to-  
Bluetooth ready) to work only inside AQUOS NET+.  
When an external keyboard is installed on TV set and  
the user select AQUOS NET+, then the keyboard  
mapping is:  
1 Interactive Media Area  
This segment is used for the audio-visual  
presentation of various types of content.  
2 Favorite Apps Area  
This area presents the top 8 apps of the user-  
defined favorite applications, including a link to  
all user-defined favorite applications.  
3 Recommended Apps Area  
This area presents a selection of recommended  
apps and also includes a link to the “all apps”  
screen as described below.  
In Area 2 and 3, please use ///to select a  
service you want to access and press OK, direction  
arrows appear around the service logo.  
(ENTER)/INTRO = OK (R/C). Used to enter inside  
1
2
any service or to fix data once inside.  
///(U/O/I/K, or u/o/i/k for not extended  
keyboard). Used to move between services or scroll  
pages on Left/Right direction.  
3
ESCape =6 (Return R/C). Return to previous page  
on services.  
E
Favorite Apps Screen  
4
5
(Backspace). Erase last character entered.  
A..Z,a..z,0..9, and some US symbols (period or dot,  
commercial at @, underscore, hyphen, exclamation,  
question, colon, opening parenthesis, closing  
parenthesis, number, slash, backslash, space).  
Used for Login, Passwords, Date, and so.  
This screen gives an overview of all user-defined  
favorites. Favorites can be selected in the all-apps  
screen, as described below. The Top row of apps  
is presented on the home-screen. The first row  
(1) is automatically presented in the favorite apps  
section on the home screen.  
NOTES  
The TV does not support hot plug connection of USB  
devices like a keyboard. If you wish to connect any other  
device, please do it when the TV is Power Off or in Standby.  
Inside AQUOS NET+ services, please use standard US  
characters only (Not extended characters or Special  
Country Language dependent), in order to avoid problems  
with the applications.  
Using external USB keyboard is not possible to exit from  
AQUOS NET+. If necessary, use the END remote key.  
Some types of keyboard could show incompatibilities or  
try to use functions not supported by the TV.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV menu options  
Extras function  
Current programme:  
Record currently watched programme.  
Menu item will only be indicated when EPG data  
is available for the current station. See page 50.  
Extras option contains additional functions and  
settings:  
Following programme:  
Record following programme.  
Menu item will only be indicated when EPG data  
is available for the current station. See page 50.  
Recording via EPG:  
Programme recording of a programme via the  
electronic programme guide (EPG). See page  
50.  
Open USB REC archive  
Opens the USB REC archive. See page 51.  
Timer  
In this option you can find your saved Timer Instructions.  
Timer Instructions  
3
With ///select the desired option  
and press OK to proceed.  
All  
programmed  
recordings,  
programmed  
reminders and copies are listed in this screen.  
Also it is possible to programme new recordings.  
-New copy  
You should copy recordings that you want to save  
permanently on an external USB hard disk.  
1
With ///select Create newly and  
press OK.  
With ///select New copy and press  
OK. The function list for USB REC archive  
will be opened. See page 49.  
With ///select the desired option  
and press OK to proceed.  
2
3
-New memo (EPG event)  
You can set a timer as a reminder for programmes  
which have not yet started.  
Create newly  
Create new timer instruction.  
1
With ///select Create newly and  
press OK.  
2
With ///select New memo and  
press OK. The EPG will be called.  
The TV will ask at the beginning of a programme if it  
should change the channel accordingly.  
-Delete  
Use this function in the overview of timer  
instructions if you want to delete recordings already  
programmed or end a running timer recording.  
1
2
With ///select Delete and press OK.  
With /select the timer instruction to be  
deleted and press OK. Ahead of the entry  
New recording  
With ///select Create newly and  
press OK.  
With ///select New recording and  
press OK. The function list for recording will  
be opened:  
1
2
appears a delete icon  
.
3
With ///select Confirm delete  
option and press OK to delete timer  
instructions.  
Select Cancel to return to Timer Instructions.  
NOTE  
When you have programmed timer recordings, the TV  
can only be switched off in the standby mode.  
Software  
This option allows you to have the TV software version  
always updated. You can download new software from  
different sources:  
Software update  
Via USB  
Current software version can be downloaded from  
the SHARP Internet site and installed on your TV  
using a USB memory.  
Manual recording:  
Programme the recording manually. See page 51.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV menu options  
Via Internet  
The software update wizard appear.  
Setup function  
Via antenna  
Here you can find all settings and adaptabilies of the  
TV set.  
The software update wizard appear.  
See page 27 for more information.  
Energy Efficiency  
Decide how energy efficient the TV shall be.  
Home Mode:  
The emphasis for home use is on low energy  
consumption.  
The automatic dimmer is activated.  
Shop Mode:  
The picture settings are aligned to operate in  
the presentation room. The automatic dimmer is  
deactivated. If the ambient brightness diminishes, the  
energy consumption is not reduced.  
Picture  
Allows you to adjust the settings according to the  
representation of the picture signal on the TV.  
See page 21 for more information.  
CA module(s)  
In order to receive coded digital stations, a Common  
Interface Module (CI Module) and a CA Card must be  
inserted in the CI slot of the TV.  
Sound  
Allows you to find the settings for sound playback.  
The sub-items of the menu depend on the currently  
selected sound component.  
See page 8 for more information.  
Special functions  
See page 21 for more information.  
Stations  
Move and delete TV and radio stations. In addition to  
that you can automatically and manually update the  
complete station list. The stations can also be arranged  
and optionally sorted in personal lists.  
See page 22 for more information.  
Integrated features  
Shows information about TV's integrated features.  
Control  
Repeat initial installation  
In this menu you find settings for additional functions of  
the TV set such as digital recorder (USB REC) as well as  
interfuctional settings like time and date, parental lock  
or software update.  
This option allows you to repeat all steps for initial  
installation. See the procedure at page 9.  
NOTE  
All stored stations and all personal lists will be deleted.  
See page 24 for more information.  
Reset to factory settings  
Allows you to reset Picture/Sound and Network  
settings.  
Multimedia/Network  
In this menu you can configure your network adapter  
and network access. Also you can make settings for  
video and music playback here.  
AV selection  
Allows you to select the AV source.  
If the selected AV source provides a signal it should be  
visible now.  
See pages 28 and 47 for more information.  
Connections  
In this menu you can configure external devices that are  
connected to the TV.  
See page 28 for more information.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting external devices  
E Before connecting ...  
• Be sure to turn off the TV and any devices before making any connections.  
• Firmly connect a cable to a terminal or terminals.  
• Carefully read the operation manual of each external device for possible connection types. This also helps you get  
the best possible audiovisual quality to maximise the potential of the TV and the connected device.  
Introduction to connections  
The TV is equipped with the terminals as shown below. Find the cable corresponding the TVs terminal and connect  
the device.  
NOTE  
• The cables illustrated in pages 41, 42 and 43 are commercially available items.  
Audio device  
(Page 43)  
Audio cable  
Audio cable  
Audio cable  
PC IN  
HDMI / PC  
ANALOG  
AUDIO  
INPUT  
PR  
SCART (AV/RGB/S-VIDEO)  
Video recording device  
(Pages 42 and 43)  
VIDEO  
SCART cable  
PB  
Y
SERVICE  
Components cable  
ETHERNET  
(10/100)  
Audio cable  
AV cable  
C.I.  
Game console or  
camcorder (Page 42)  
HDMI-certified cable  
HDMI-certified cable  
USB  
(HDD)  
SPDIF  
(RCA)  
USB  
(WIFI)  
SAT  
(LE*52  
series)  
2
3
1
(ARC)  
HDMI device  
(Page 42)  
DVI/HDMI Cable  
ø 3.5 mm stereo mini jack cable  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting external devices  
HDMI connection  
Y
PB  
(CB)  
PR  
(CR)  
Component connection  
Example of connectable devices  
Example of connectable devices  
DVD player/recorder  
Game console  
Blu-ray player/recorder  
VCR  
DVD player/recorder  
Blu-ray player/recorder  
You will enjoy accurate colour reproduction and high  
quality images through the INPUT COMPONENTS /  
AV terminal when connecting a DVD player/recorder or  
other device.  
The HDMI connections permit digital video and audio  
transmission via a connection cable from a player/  
recorder. The digital picture and sound data are  
transmitted without data compression and therefore  
lose none of their quality. Analogue/digital conversion  
is no longer necessary in the connected devices, which  
also would result in quality losses.  
RCA / ø 3.5 mm  
Audio cable  
stereo mini jack cable  
HDMI / PC  
ANALOG  
(ARC)  
AUDIO  
INPUT  
HDMI-certified  
cable  
DVI/HDMI  
cable  
Components  
cable  
DVI/HDMI conversion  
Using a cable DVI/HDMI, the digital signals of a DVD  
video, can also be reproduced through a compatible  
HDMI connection. The sound should be supplied  
additionally.  
VIDEO connection  
Example of connectable devices  
• On connecting a DVI/HDMI cable to the HDMI terminal, the  
picture may not be visualised clearly.  
VCR  
DVD player/recorder  
Blu-ray player/recorder  
Game console Camcorder  
Both HDMI and DVI use the same method of HDCP  
protection against copy.  
• For connecting a DVI cable, a commercially available adaptor  
(not supplied) is necessary.  
You can use the COMPONENTS/AV terminal when  
connecting to a game console, camcorder, a DVD  
player / recorder or other device.  
NOTE  
Depending on the type of HDMI cable used, a video noise  
may appear. Be sure to use a certified HDMI cable.  
AV cable  
On reproducing HDMI picture, the best format is  
automatically detected and adjusted for the picture.  
Compatible video signal  
576i, 576p, 480i, 480p, 1080i, 720p, 1080p  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting external devices  
SCART connection  
Speaker/amplifier connector  
Example of connectable devices  
Example of connectable devices  
VCR Decoder  
Connecting an amplifier with digital audio  
input  
DVD player/recorder  
SCART cable  
Connect an amplifier with external speakers as shown  
below.  
RCA Audio cable  
SCART (AV/RGB/S-VIDEO)  
Amplifier with RCA  
digital audio input  
Decoder  
NOTE  
After connecting  
In cases when the decoder needs to receive a signal from  
Digital audio output setting  
the TV, make sure you select the appropriate input terminal  
to which the decoder is connected in “AV selection” (Page  
17).  
After connecting an amplifier with RCA digital audio  
input as shown, you should set an audio output  
format compatible with the programme you are  
watching or the device connected.  
Press MENU and go to Setup Sound  
SPDIF mode select PCM or Dolby  
Digital.  
NOTE  
• When you set this to Dolby Digital, and you  
receive the Dolby Digital or Dolby Digital Plus audio  
formats, Dolby Digital audio is output. Otherwise,  
PCM audio is output.  
When you set this to PCM, PCM audio is output  
no matter what audio formats you receive.  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
HDMI devices  
Controlling HDMI devices using  
HDMI CEC  
Connecting a player/recorder via the  
speaker system  
E What is HDMI CEC?  
Using the HDMI CEC protocol, you can interactively  
operate compatible system devices (AV amplifier, DVD  
player/recorder, Blu-ray player/recorder) using a single  
remote control unit.  
NOTE  
• HDMI CEC does not work while using USB REC functions.  
E What you can do with HDMI CEC  
Player / Recorder  
Speaker  
system  
One touch play  
When the TV is in standby mode, it will automatically  
turn on and play back the image from the HDMI  
source.  
  
  
HDMI-certified cable (commercially available)  
RCA audio cable (commercially available)  
Single remote control operation  
Connecting a player/recorder only  
HDMI CEC automatically recognises connected  
HDMI devices and you can control the TV and the  
devices as if using a universal remote control unit.  
Operating title list of external devices  
In addition to displaying the TVs own timer list (Page  
36), you can also call up the external players top  
menu or players / recorders title list provided that the  
devices support HDMI CEC.  
NOTE  
When you use HDMI CEC, be sure to use a certified HDMI  
Player/Recorder  
HDMI-certified cable (commercially available)  
cable.  
Point the remote control unit towards the TV, not to the  
connected HDMI device.  
HDMI CEC (Consumer Electronics  
Control) menu  
Video noise may occur depending on the type of HDMI  
cable used. Be sure to use a certified HDMI cable.  
Up to three HDMI recording devices, one AV amplifier and  
three players can be connected using this system.  
Basic operation  
These operations affect the HDMI device selected as the  
current external source. If the device does not operate, turn  
on the device and select the appropriate external source  
using b.  
Go to MenuSetupConnectionsHDMI CEC  
and select the menu you want to set.  
HDMI CEC functionality  
When you insert/remove HDMI cables or change  
connections, turn on all connected HDMI devices before  
turning on the TV. Confirm that picture and audio are  
correctly displayed/output by selecting “HDMI 1”, “HDMI 2”,  
“HDMI 3” or “HDMI 4” from the “AV selection” menu.  
Set to On to enable HDMI CEC functions.  
Remote TV switch on via HDMI-CEC  
(One-touch play)  
If this is activated, the one touch play function is enabled.  
While the TV is in standby mode, it automatically turns  
on and plays back the image from the HDMI source.  
HDMI CEC connection  
First connect the speaker system or a player/recorder  
that supports the HDMI CEC protocol.  
NOTE  
NOTE  
• The factory default for this item is “Off”.  
Refer to the operation manual of the device to be connected  
for further details.  
Operating a HDMI CEC device  
After unplugging connection cables or changing the  
connection pattern, turn on the power of the TV after all the  
power of relevant devices has been turned on. Change the  
external input source by pressing b, select the appropriate  
external source and verify the audiovisual output.  
When a device that supports HDMI CEC is connected,  
the R/C of TV does not work.  
By short pressing of SOURCE button the R/C will be  
operational again and TV goes to TV mode.  
By long pressing of SOURCE button the TV return to  
HDMI-CEC mode.  
The cables illustrated in the following explanation are  
commercially available items.  
44  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting a PC  
VGA cable  
PC connection  
HDMI (DVI) Connection  
HDMI 1, 2, 3 or 4  
PC  
PC  
HDMI-certified cable  
DVI/HDMI Cable  
ø 3,5 mm stereo  
mini jack cable  
NOTE  
• When using the PC-IN terminal it is necessary to connect  
an audio cable.  
ø 3,5 mm stereo mini  
jack cable  
Selecting the picture size  
You can select the picture size.  
1
2
Press MENU on the remote control.  
Select Setup Picture Picture format, then  
press OK.  
3
Press /key to select the desired item, then  
After connection  
press OK.  
If after connecting a PC to the TV through a HDMI  
cable, the audio does not run, connect a mini stereo  
connector of ø 3.5mm between TV and PC as  
indicated in the previous drawing.  
Example  
When a PC is connected to the TV with a DVI  
cable, it will be necessary to connect a mini stereo  
connector of ø 3.5mm of the TV to PC as indicated  
in the previous drawing.  
4:3 PC  
16:9 PC  
Analogue Connection  
Item  
DVI/VGA Conversion cable  
16:9 PC  
4:3 PC  
Proportionally correct display of 16:9  
Proportionally correct display of 4:3  
NOTE  
You can also select an item by pressing f on the remote  
control unit.  
ø 3,5 mm stereo  
mini jack cable  
Connect the PC before making adjustments.  
Selectable picture size may vary with input signal type.  
45  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting a PC  
1
Item  
Adjusting the PC image  
automatically  
Horizontal  
picture  
Centres the image by moving it to the  
left or right.  
position.  
This function enables the screen to be automatically  
adjusted to its best possible condition when the  
analogue terminals of the TV and PC are connected  
Vertical  
picture  
position  
Centres the image by moving it up or  
down.  
with  
a
commercially available DVI/VGA conversion  
cable, etc.  
Phase  
Adjusts when characters have low  
contrast or when the image flickers.  
1
Press b to select PC-IN from AV selection,  
position  
and then press OK.  
Auto  
2
3
4
Press MENU key.  
Automatically adjusts the image  
Press key to select Setup and press OK.  
Adjustment  
Press key to select Picture more... and press  
OK.  
NOTE  
5
6
Press key to select PC IN display and press  
OK.  
The “PC IN display” options in the “Picture” menu can be  
adjusted only when inputting analogue signals through the  
“PC IN” terminal.  
Press key to select Auto Adjustment and  
press OK.  
Depending on resolution, the vertical/horizontal manual  
range can be different.  
NOTE  
When connecting a PC and select PC-IN source, the “Auto  
adjustment” is executed automatically.  
PC compatibility chart  
“Auto adjustment” may fail if the PC image has low  
resolution, has unclear (black) edges, or is moved while  
executing “Auto adjustment”.  
Horizontal  
Frequency  
Vertical  
Frequency  
Resolution  
Be sure to connect the PC to the TV and switch it on before  
starting “Auto adjustment”.  
VGA  
31,5 kHz  
37,9 kHz  
48,4 kHz  
47,7 kHz  
64,0 kHz  
60 Hz  
60 Hz  
60 Hz  
60 Hz  
60 Hz  
640 g 480  
800 g 600  
“Auto adjustment” can be executed only when inputting  
analogue signals through the “PC IN” terminal.  
SVGA  
XGA  
1.024 g 768  
1.360 g 768  
1.280 g 1.024  
WXGA  
SXGA  
Adjusting the PC image manually  
SXGA+  
UXGA  
1080p  
65,3 kHz  
75,0 kHz  
67,5 kHz  
60 Hz  
60 Hz  
60 Hz  
1.400 g 1.050  
1.600 g 1.200  
1.920 g 1.080  
Ordinarily you can easily adjust the picture as necessary  
to change image position using “Auto Adjustment”.  
In some cases, however, manual adjustment is needed  
to optimise the image.  
VGA, SVGA, XGA, WXGA, SXGA, SXGA+ and UXGA are  
registered trademarks of International Business Machines  
Corporation.  
1
Press b to select PC-IN from AV selection,  
and then press OK.  
2
3
Press MENU on the remote control.  
Select Setup Picture more..., then press  
OK.  
Press key to select “PC IN display”, then  
press OK.  
Press /key to select the desired item, then  
press OK.  
NOTE  
This TV has only limited PC compatibility, correct operation  
can only be guaranteed if the video card conforms exactly to  
the VESA 60 Hz standard. Any variations from this standard  
may result in picture distortions.  
4
5
6
Press /to adjust the item to the desired  
position.  
46  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Multimedia/Network Setup  
Wired connection overview  
Network Setup  
Connecting to the network  
To enjoy internet services, you need to connect the TV  
to a router with a high speed connection to the internet.  
You can also connect the TV to your Home network  
server through a router or access point.  
The TV connection to the router can either be wired or  
wireless.  
PC (Home Media Server)  
Router (commercially available)  
ETHERNET cable (commercially available)  
Network (Internet)  
To access the TV internet configuration go to  
SetupMultimedia/NetworkNetwork settings→  
Networking. The next screen is shown:  
How to connect  
Router  
LAN terminal  
LAN  
LAN  
ETHERNET cable  
1 Switch on the router (commercially available). Refer to  
the routers operation manual for switching on.  
2 Connect the LAN terminal on the TV to the router  
(commercially available) with an ETHERNET cable  
(commercially available).  
3
Go to SetupMultimedia/NetworkNetwork  
settingsNetworking.  
4 Press OK and /to select “wired”, and then  
Press J to continue the installation.  
Choose between Wired or Wireless connection.  
press OK.  
5 Select type of IP configuration:  
Automatic: Automatic configuration of the IP  
address via DHCP server or via multiple protocols  
according to UPnP specification.  
Manual: Enter your fixed static IP addresses  
manually. (Ask your internet service provider).  
NOTE  
If you choose a wired connection to the router, you need  
an ETHERNET cable (not included, commercially available).  
If you do not have a broadband internet connection, consult  
the store where you purchased your TV or ask your internet  
service provider or telephone company.  
6 Press OK.  
Wired and wireless connection cannot be used at the same  
time. Use only one of the connection types.  
Wireless installation  
A wireless LAN connection and performance cannot be  
guaranteed for all residential environments. In the following  
cases, the wireless LAN signal may be poor or drop, or the  
connection speed may become slower.  
- When used in buildings made with concrete, reinforced  
steel, or metal.  
Use the SHARP (AN-WUD630) USB adapter with the  
TV.  
Wireless connection overview  
- When placed near objects that obstruct the signal.  
- When used with other wireless devices that emit the same  
frequency.  
- When used in the vicinity of microwave ovens and other  
devices that emit a magnetic field, electrostatic charge, or  
electromagnetic interference.  
A stable connection speed is required to play back streaming  
content. Use a wired LAN connection if the wireless LAN  
speed is unstable.  
PC (Home Media Server)  
Wireless LAN router/access point  
AN-WUD630  
LAN USB adapter  
Wireless  
Network (Internet)  
NOTE  
Wired installation  
Use an ETHERNET cable to connect the LAN terminal  
on the TV to your broadcast router as shown below.  
This is recommended when enjoying services which  
require stable connection speeds, such as streaming  
media.  
When using the SHARP wireless LAN adapter, try to provide  
as much free space around the device for best performance.  
Make sure the firewalls in your network allow access to the  
TV wireless connection.  
47  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Multimedia/Network Setup  
NOTES  
Operations cannot be guaranteed when used with access  
points that do not have Wi-Fi® certification.  
To connect your TV to the internet, you must have a  
broadband internet connection.  
A wireless LAN access point is required to connect the TV to  
the Internet using a wireless LAN. See the operation manual  
of your access point for setup.  
If you do not have a broadband internet connection, consult  
the store where you purchased your TV or ask your internet  
service provider or telephone company.  
There is no need to enter the security key for subsequent  
connections to the wireless network.  
How to connect  
If your access point is set to a stealth mode (Hidden  
SSID, that prevents detection by other devices), you  
need to use manual method to enter the SSID name for  
desired access point.  
1
2
Switch on your router/access point before starting  
the network installation.  
AN-WUD630  
Connect the  
USB adapter to the  
USB Wi-Fi port on the TV.  
Do not use a wireless LAN adapter other than the AN-  
WUD630 Sharp wireless LAN adapter, as operations  
cannot be guaranteed.  
1
Select Enter access point manually and press  
OK. Introduce the SSID name using the on-screen  
keyboard.  
Select Adopt and press OK to fix the name.  
Select Encryption method and press OK.  
If your wireless network is secured, have the  
encryption key ready to enter on screen.  
3
Go to SetupMultimedia/NetworkNetwork  
2
3
settingsNetworking.  
4
Press OK and /to select “wireless”, and then  
press OK.  
Only if your access point is secured a WEP key or a  
WAP password will be required.  
4
The "Wireless" connection will be automatically selected  
if the TV detects only the wireless USB adapter.  
The TV starts to search for wireless routers/access points.  
Repeat the process from point 7 of previous  
explanation.  
To change wireless LAN connection settings, go to  
Setup Multimedia/Network Network settings  
Networking.  
NOTES  
Any low bandwidth adapter (router, hub, wireless access  
point,…) will show poor network connection and then, poor  
streaming quality. It is recommended 56 Mbps or higher  
bandwidth for full feature.  
Working in close proximity to other Wireless/Bluetooth  
networks, may cause some trouble using a Wi-Fi adapter on  
the internet connected TV. Because the wireless link cannot  
be guaranteed, please try to change the Wi-Fi channel on  
the Access Point (AP) to avoid interference. Please refer to  
Access Point User Manual.  
5
6
Select required router/access point and press OK.  
As soon as is displayed , you can go back one  
installation step by pressing this button.  
If your network has an access code, it is necessary  
to enter the code that allows access to the  
network. A screen keyboard will appear to enter  
the password.  
Home Media (DLNA) requires external streaming media  
software installed on a PC, inside the HOME Network, that  
is not included with AQUOS NET+.  
Press OK.  
Home Media (DLNA) server software as Windows Media  
Player 11 (Windows Vista included) or Windows Media  
the certified media server list. Follow the server softwares  
user manual for setup, share and stream media contents.  
7
Select IP address assignment method. You can  
choose between: Automatic (DHCP) or Manual  
(Input Static IP Address).  
Automatic (DHCP): IP address is automatically  
issued by a DHCP server on your home network.  
A DHCP server has to be set up on a device on  
the network (WLAN router/access point).  
Home Media (DLNA) (Video, Music and Photo) data is  
organised in folders depending on the Server hierarchy;  
options such as Artist, Genre, Composer, Ratings, Playlist  
or Watch Folders may be present for sorting content, but  
can be different depending on the selected Media Server.  
Input Static IP Address: IP address is entered  
manually. Use the RC alphanumeric buttons, to  
input digits of IP address.  
Press J to continue.  
The “Play To” function of some PC Media Players may result  
in very compressed video quality. For best video quality,  
please use the USB Media Player function of the TV.  
Afterwards you will see a summary of the settings.  
Press J to confirm settings.  
8
48  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USB REC function  
USB REC function  
Archive playback  
Select V on the screen during playback to fast forward.  
By selecting  
repeatedly, allows you to increase the  
V
USB REC (Video Recorder)  
fast forwards speed.  
Select  
on the screen and press OK button to  
USBRECfunctionallowsyoutorecordaTVprogramme  
and watch it later. It also allows you to schedule one or  
more recordings and they will be available to view later  
on.  
restore the normal speed.  
L
By selecting  
forwards in intervals of two minutes.  
Select S on the screen during playback to rewind. By  
selecting  
rewind speed.  
on the screen the recording fast  
If EPG or teletext data are available, the USB REC  
stores the title and additional information about each  
programme.  
repeatedly, it allows you to increase the  
S
Select  
on the screen and press OK button to  
If additional languages are being transmitted for a DVB  
broadcast, these are also recorded. DVB subtitles  
or teletext subtitles are recorded if the recording of  
subtitles has been activated in the USB REC settings.  
restore the normal speed.  
By selecting T on the screen the recording rewinds in  
intervals of two minutes.  
USB REC  
requires an external USB 2.0 memory or a  
USB REC settings  
hard disk, always connected and previously configured  
to record the information.  
You can make a few settings in the USB REC menu to adapt  
it to your requirements.  
The first USB device connected appears as USB1  
terminal.  
The USB memory must be formatted before first  
use for USB REC function.  
Go to MENUSetupControlmoreUSB REC,  
then press OK:  
Buttons for USB REC function  
USB REC  
Notify hidden sections  
Manual recording  
If an entry has been hidden in an archive recording, you  
can be informed by a screen message when skipping a  
hidden area. The factory default is set to yes.  
Record interesting programmes directly into USB  
memory with the USB REC button. When viewing time-  
shift broadcasts the current broadcast can be saved to  
the USB memory. The programme is recorded from the  
beginning to the end of the time offset recording or to  
the end of the set recording time.  
Jump distance  
Set the standard jump width (in minutes) used from  
jumping forwards or backwards in the film by pressing  
S or V. Use the numeric buttons on the remote  
control to enter the time.  
Timer-controlled recording  
Select your favourite programme for recording, from  
the EPG. The timer overview has room for 50 entries.  
Watch the programmes later from the USB memory.  
If Smart jump is activated, the jump width can  
only be set between 1 and 4 minutes.  
Smart Jump  
Serial recording  
If Smart Jump is activated, the jump width is halved  
every time you change the jump direction. The jump  
width is doubled if you jump more than three times in  
the same direction (max. 8 min.).  
You can conveniently programme series broadcast with  
alternating start times.  
Time shift viewing with archive recording  
If youare recording a programme and would like to  
watch it before it has finished, you can watch the movie  
with a time shift while the rest is still being recorded.  
Serial recording tolerance  
A broadcast programmed with the recording type  
Serial is recorded if it begins within the programmed  
start time series recording tolerance. Use the numeric  
buttons on the remote control to enter the time (always  
two-digit for 01 to 60 min.).  
49  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USB REC function  
Recording subtitles  
Select here whether subtitles are to be recorded for  
DVB stations.  
Programming a timer recording with  
EPG  
You can programme timer recordings for USB REC  
using the EPG.  
Manual recording  
When you have programmed timer recordings, the TV  
set can only be switched off to the standby mode.  
If you switch the TV set off by the mains, no timer  
recordings will be made.  
With USB REC button, the recording starts immediately  
at the press of a button. You only need to specify the  
recording time.  
1
Press USB REC button. The Recording duration  
screen is called.  
1
2
3
Press EPG button.  
Select the broadcast to be recorded.  
Press REC(E) button. Recording screen is opened.  
Current programme  
The broadcast being watched is recorded on to a  
USB memory or on to a hard disk.  
30 min/ 60 min/ 90 min/ 120 min/ 180min /240min  
Allows you to choose the recording duration.  
See Recording in page 32 for more information.  
???  
Manually enter the recording duration with the  
numeric buttons of the remote control.  
2
3
Select desired recording time with /buttons.  
Press OK to confirm.  
The Timer data screen appears.  
Check the timer data, change if necessary and confirm  
with OK. The recording will start and the recording  
progress bar will be displayed for a moment.  
While recording is activated, the status indicator  
(AQUOS pyramid) lights up violet.  
You can end a current recording prematurely by pressing  
H
button and OK button.  
NOTE  
If there is no teletext or EPG programme information,  
the recording duration menu will appear the first time  
you press the I button. Select the desired recording  
duration and confirm using OK.  
50  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USB REC function  
Programming a timer recording  
manually  
Delete programmed timer entries  
Use this function in the timer overview if you want to  
delete recordings already programmed or end a running  
timer recording.  
You can programme timer recordings for USB REC  
manually.  
Set the TV to TV mode, select the station to be recorded.  
1
Press MENU button and go to ExtrasTimer,  
press OK and the recordings already programmed  
are displayed.  
1
Press OK button and select RecordingManual  
recording.  
2
Choose between 30 min- 240 min and press OK.  
The Timer Data menu is displayed. Check the  
timer data and change if necessary.  
2
With /select the timer entry to be deleted and  
press OK.  
3
4
With ///select the station or connection  
3
4
With /select Confirm delete.  
Press OK to confirm.  
socket to be recorded.  
Select Adopt to timer and press OK. The broadcast  
is entered into the timer overview.  
The letters of a timer currently active are red. If you  
delete this timer, the recording is stopped.  
If a DVD recorder was selected as a recording source,  
start playing the connected device manually from the  
beginning of the entered recording time.  
Archive playback settings  
If you switch the TV set off by the mains, no timer  
recordings will be made.  
Playing from the archive  
1
Press MENU button and go to VideoUSB REC  
archive.  
2
3
With /select the recording.  
Press OK to start playback.  
Setting bookmarks  
While playing an archive recording, you can set  
bookmarks.  
1
By pressing /button the play progress bar will  
be displayed.  
2
Press I (PLAY) button for a little longer to set  
bookmark. Every time the I (PLAY) button is  
pressed down again a little longer, a new bookmark  
is set.  
3
You will see the message:  
A bookmark was set!  
You can set up to 15 bookmarks per recording.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
51  
USB REC function  
Jumping to bookmarks  
Hiding sections of the recording  
1
2
Press p button and progress bar display appears.  
Press Blue button to next bookmark.  
You can hide sections of an archive recording. The  
hidden parts are skipped in the future playback and  
when copying to a connected recorder.  
1
During the archive playback press F button at the  
Delete individual bookmarks  
point of the recording where the hide is to begin.  
2
3
4
5
Select  
on the progress bar and press OK to call  
1
2
Press p button and progress bar display appears.  
Delete/Hide menu.  
With /buttons select Hide to set the start of the  
section to be hidden.  
Press F to continue playback or G/V skip/wind  
to the point where the hide is to end.  
Press Yellow button to set hiding end.  
With  
delete.  
/
select the bookmark you want to  
3
Select  
bookmark.  
and press OK to delete selected  
Jumping  
The hidden area of the recording is shown red in the bar.  
In future it will be skipped during playing.  
1
2
Press p button and progress bar display appears.  
With L/K you can jump forwards and  
backwards through the recording archive.  
If in the settings of theControl USB REC Notify  
hidden sections yes is set, you will see a screen  
message, if the hidden area has been reached during  
playback.  
Smart Jump  
6
Press Blue button during the screen message to  
show hidden area again permanently.  
Allows you to search quickly for certain scenes of a  
recording.  
For more information see page 49.  
Slow motion  
At an active pause (freeze frame) you can select from  
four slow motion speeds (for wind/rewind). There is no  
sound during slow motion replay.  
Fast forward and rewind  
1
2
3
4
Press p button and progress bar display appears.  
Press F button to switch to freeze picture.  
Select J/S and press OK to start slow motion.  
Press F button again to continue playback.  
During time shift viewing you can fast forward and  
rewind at different speeds. Sound is not audible during  
winding.  
1
2
Press p button and progress bar display appears.  
With J/S you can fast forwards/backwards.  
The speed increases every time you press the button  
until eventually switching back to the initial speed.  
For more information see Archive playback on page 49.  
USB REC archive function list  
Pause (freeze picture)  
The function list of USB REC archive contains individual  
functions for its archive entries.  
1
2
Press F button to switch to freeze picture.  
Press F button again to continue playback.  
1
Press MENU button and go to Video USB REC  
archive.  
2
3
With /buttons select the archive.  
Press button to open the functions list for the  
archive selected.  
Deleting parts of the recording  
You can delete sections of a recording from the current  
position within the film to the beginning or to the end.  
1
During the archive playback press F button at  
the point from which the archive recording is to be  
deleted.  
2
3
Select  
on the progress bar and press OK to call  
Dele
t
e/Hide menu.  
With /buttons select Delete to start or select  
Delete to end.  
4
5
Select Confirm delete and press OK.  
Select Cancel and press OK to abort delete.  
52  
Download from Www.Somanuals.com. All Manuals Search And Download.  
USB REC function  
View  
Pause  
Start or continue replaying the selected archive  
entry.  
Press F button. The TV images becomes a freeze  
frame and TimeShift status display appears.  
Detailed info  
Show detailed information on the marked archive  
entry.  
Continue time shift viewing  
Press  
F
button. You can now watch the TV  
programme with a time shift from the time you  
pressed the F button for the first time. The symbol  
appears in place of the F symbol.  
Sorting  
Sort archive entries in alphabetical order or  
according to recording date (newest first).  
Switch to live picture  
Rename  
Change title or archive entry.  
Press H button. You see the station's live picture  
again.  
Delete  
Setting bookmarks  
To retrieve interesting scenes later, you can manually  
set the bookmarks.  
With ///select on screen  
OK.  
Delete archive entry from USB memory or hard disk.  
Copy  
Copying an archive entry to another hard disk or  
USB memory.  
and press  
In addition, there are also automatically set  
bookmarks every time the broadcast is changed.  
Jump to automatically set bookmarks  
With time-shift television, and with the progress bar  
display showing, you can skip to automatically set  
bookmarks.  
Repeat  
Play archive repeatedly (in a loop) when the archive  
entry is replayed in the future.  
Settings  
Opens the video settings.  
Further information can be found on page 33.  
With ///select on screen:  
: Jump back  
TV viewing with time shift  
: Jump forward  
Jumping  
The USB REC continuous operation is switched on as  
the factory default setting. In this case the TV broadcast  
that you wish to view is automatically recorded in the  
background.  
You can jump during time shift viewing by selecting  
on screen G/V.  
Smart Jump  
If Smart Jump is activated, the jump width is halved  
every time you change the jump direction. The jump  
width is doubled if you jump more than three times in  
the same direction (max. 8 min.).  
19:05  
10:05  
Time shift  
25:05 min  
F
H
KLS J  
Fast forward and rewind  
During time shift viewing you can fast forward and  
rewind at three different speeds. Sound is not audible  
during winding.  
NOTES:  
Recommend that you use a hard disk (HDD) for this  
function.  
Is necessary to have 8Gb free minimum for a correct  
functionality of TimeShift.  
The TimeShift recording has a durability of maximum  
3 hours.  
Select on screen G or V and press OK.  
Every time you press OK, the speed will increase.  
Select  
to return to normal view.  
Delete bookmarks  
Press F button and TimeShift display appears.  
With  
/
select the bookmark you want to  
delete.  
Select  
bookmark.  
and press OK to delete selected  
53  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Enjoying 3D image viewing  
Enjoying 3D image viewing  
Viewing 3D images  
You can enjoy 3D-supported images on the TV when  
you wear 3D glasses (AN-3DG20-B), sold separately.  
Confirm how to use the 3D glasses before watching  
3D-supported images. These 3D glasses are only for  
use with SHARP LCD TVs supporting 3D.  
1
2
Select the 3D source (HDMI).  
Press 3D button on remote control.  
Explanation of 3D settings  
2D->3D  
NOTE  
If you set this adjust to on, all 2D images will be  
displayed in 3D. You will need to wear the 3D glasses  
to view it properly.  
The TV screen may temporarily become black when the TV  
is trying to detect a 3D image signal and when switching  
from 3D to 2D mode.  
3D mode  
Off  
Receiving a 3D image signal that can  
be detected automatically  
Here you can deactivate the 3D mode of the TV. The  
TV shows the 2D/3D images in the same way as it is  
provided by the station or external player.  
Automatic  
If the TV is set to this setting (factory setting), then  
the TV automatically switches over to the correct 3D  
mode if it is possible.  
Only change the setting if the 3D content is not  
displayed correctly.  
Side by side  
To display 3D content in side by side format. When  
viewing 3D content with this setting, two almost  
identical images are displayed next to each other and  
are put together correctly by the TV set.  
The image signal may contain a 3D identification signal.  
You can enable the TV to automatically detect the 3D  
image type.  
Top/bottom  
To display 3D content in top/bottom format. When  
viewing 3D content with this setting, two almost  
identical images are displayed one above the other  
and are put together correctly by the TV set.  
After pressing 3D button a screen appears prompting  
you to select between the following options.  
E When “3D mode” is set to “Automatic”  
The 3D display format is detected automatically and  
the appropriate 3D image is displayed.  
E When “3D mode” is set to “off”  
The image is displayed as 2D format.  
54  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Enjoying 3D image viewing  
Watching 2D images in 3D  
Receiving a 3D image signal that  
cannot be detected automatically  
You can convert normal 2D images into 3D images (3D  
effect).  
When the TV receives a 3D image signal that cannot be  
detected automatically, you can select between 3D and  
2D image viewing.  
1
Press 3D button on remote control.  
2
Press a/b to select "2D->3D""on", and then  
press ;.  
Turn on the power of the 3D glasses, and then  
wear the 3D glasses.  
1
2
Select the 3D source (HDMI).  
Press 3D button on remote control. The following  
screen appears.  
3
NOTE  
If the input signal switches to 2D, 2D images are  
displayed automatically.  
3
Press c/d to select “side by side” , “top/  
bottom” or “Games”, and then press ;.  
3D mode is cancelled automatically when: the  
setting is changed, the input source is changed,  
the input signal resolution is changed or the power  
is turned off.  
E To view in 3D mode ("side by side" or  
"top-bottom")  
1 Press c/d to select the 3D signal type (“side  
by side” or “top/bottom”), and then press ;.  
• If you select the same system as that of the input  
signal, 3D images are displayed.  
Recharging the 3D glasses battery  
When the battery power is low, the LED light blinks one  
time per second. If the 3D glasses battery runs out,  
you can recharge the 3D glasses battery by connecting  
the USB-mini USB cable, supplied with glasses, to any  
of the TV set side USB terminals or any other proper  
source.  
2 Turn on the 3D glasses switching them to "3D"  
and then wear the 3D glasses.  
The LED lights up green.  
E To view in 2D mode  
To view 2D mode without glasses:  
When the LED light goes off, the recharge is complete.  
USB  
(HDD)  
1 Press a/b to select  
"off”, and then press  
;.  
To view 2D mode some of you at the same time than  
other people are viewing 3D mode:  
1 Follow up the step 1 of previously described  
in "To view in 3D mode ("side by side"  
or "top-bottom")".  
2 Turn on the 3D glasses switching to "2D" and  
then wear the 3D glasses.  
The LED lights up green.  
NOTES  
After approximately 10 minutes without receiving 3D signal  
the 3D glasses turn off automatically.  
To power off the power of 3D glasses, switch them to Off.  
The LED will also turn off.  
55  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Enjoying 3D image viewing  
Display format for 3D and 2D images  
Image for input signals  
Selectable mode  
Description  
Converts normal 2D images into 3D images.  
2D3D  
Creates 3D images from 3D images displayed side  
by side. The image is split into a left and right image,  
and then the images are stretched and displayed  
sequentially to create a 3D image.  
3D mode  
(using the 3D  
glasses)  
Side by Side  
Creates 3D images from 3D images displayed  
on the top and bottom. The image is split into a  
top and bottom image, and then the images are  
stretched and displayed sequentially to create a 3D  
image.  
Top and Bottom  
Side by Side s 2D  
Top and Bottom s 2D  
Creates 2D images from 3D images displayed  
side by side. Only the left image is stretched and  
displayed. The image does not appear in 3D.  
2D mode  
(without using  
the 3D glasses)  
Creates 2D images from 3D images displayed on  
the top and bottom. Only the top image is stretched  
and displayed. The image does not appear in 3D.  
NOTE  
These 3D glasses are only for use with SHARP LCD TVs supporting 3D.  
Troubleshooting - 3D Images  
Problem  
Possible solution  
3D images are not displayed.  
Is 3D mode set to “Automatic”? Press 3D to switch to 3D mode "Automatic".  
If 3D mode is set to “Automatic” but no 3D images are displayed, check the display format of the  
content being viewed. Some 3D image signals may not be recognised as 3D images automatically.  
Press 3D to select the appropriate display format for the 3D image.  
Are the 3D glasses set to 3D mode?  
Is there an obstacle between the 3D glasses and the TV, or is something covering the infrared  
receiver on the 3D glasses? The 3D glasses operate by receiving a signal from the TV. Do not place  
anything between the 3D infrared emitter on the TV and the infrared receiver on the 3D glasses.  
The 3D glasses turn off  
automatically.  
Is there an obstacle between the 3D glasses and the TV, or is something covering the infrared  
receiver on the 3D glasses? The 3D glasses turn off automatically after three minutes if no signal  
is received from the TV. Do not place anything between the 3D infrared emitter on the TV and the  
infrared receiver on the 3D glasses.  
Switching the 3D glasses button to  
2D or 3D does not cause the LED  
to light up green.  
Is the battery in the 3D glasses exhausted? If the LED light does not light after pressing the power  
button for more than one second, the battery is exhausted. Recharge the battery via mini USB  
connector.  
56  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Enjoying 3D image viewing  
3D glasses lenses  
• Do not apply pressure to the lenses of the 3D glasses. Also, do not drop or bend the 3D glasses.  
• Do not scratch the surface of the lenses of the 3D glasses with a pointed instrument or other object. Doing so may  
damage the 3D glasses and reduce the quality of 3D images.  
• Use only the cloth provided with the 3D glasses to clean the lenses.  
3D glasses infrared receiver  
• Do not allow the infrared receiver to become dirty, and do not attach stickers to or otherwise cover the infrared receiver.  
Doing so may prevent the receiver from operating normally.  
• If the 3D glasses are affected by other infrared data communication equipment, 3D images may not be displayed  
correctly.  
Caution during viewing  
• Do not use devices that emit strong electromagnetic waves (such as cellular phones or wireless transceivers) near the  
3D glasses. Doing so may cause the 3D glasses to malfunction.  
• The 3D glasses cannot operate fully at extreme high or low temperatures. Use them within the specified usage  
temperature range.  
• If the 3D glasses are used in a room with fluorescent lighting (50/60 Hz), the light within the room may appear to flicker.  
In this case, either darken or turn off the fluorescent lights when using the 3D glasses.  
• Wear the 3D glasses correctly. 3D images will not be correctly visible if the 3D glasses are worn upside down or back-  
to-front.  
• Other displays (such as computer screens, digital clocks, and calculators) may appear dark and difficult to view while  
wearing the 3D glasses. Do not wear the 3D glasses when watching anything other than 3D images.  
• If you lie on your side while watching the TV with 3D glasses, the picture may look dark or may not be visible.  
• Be sure to stay within the viewing angle and optimum TV viewing distance when watching 3D images. Otherwise, you  
may not be able to enjoy the full 3D effect.  
• The 3D glasses may not work properly if there is any other 3D product or electronic device turned on near the glasses  
or TV. If this occurs, turn off the other 3D product or electronic device or keep the device as far away as possible from  
the 3D glasses.  
• Stop using this product in any of the following situations:  
– When images consistently appear doubled while you are wearing the 3D glasses.  
– When you have difficultly perceiving the 3D effect.  
• If the 3D glasses are faulty or damaged, stop using them immediately. Continued use of the 3D glasses may cause eye  
fatigue, headaches and illness.  
• If you have any abnormal skin reaction, stop using the 3D glasses. In very rare instances, such reactions may be due to  
an allergic reaction to the coating or materials used.  
• If your nose or temples become red or you experience any pain or itchiness, stop using the 3D glasses. Pressure  
caused by long periods of use may lead to such reactions and may result in skin irritation.  
You may not be able to use several menu items while you are watching the TV in 3D mode.  
You cannot use the 3D function in radio or data mode.  
DISCLAIMERS  
• This Sharp device facilitates the access to content and services provided by third parties. The content and services accessible via this device  
belong to and may be proprietary to third parties. Therefore, any use of such third party content and services must be in accordance with any  
authorisation or terms of use provided by such content or service provider. Sharp shall not be liable to you or any third party for your failure  
to abide by such authorisation or terms of use. Unless otherwise specifically authorised by the applicable content or service provider, all third  
party content and services provided are for personal and non-comercial use; you may not modify, copy, distribute, transmit, display, perform,  
reproduce, upload, publish, license, create derivative works from, transfer or sell in any manner or medium any content or services available via  
this device.  
• Sharp is not responsible, nor liable, for customer service-related issues related to the third party content or services. Any questions, comments  
or service-related inquires relating to the third party content or service should be made directly to the applicable content or service provider.  
You may not be able to access content or services from the device for a variety of reasons which may be unrelated to the device itself, including,  
but not limited to, power failure, other Internet connection, or failure to configure your device properly. Sharp, its directors, officers, employees,  
agents, contractors and affiliates shall not be liable to you or any third party with respect to such failures or maintenance outages, regardless of  
cause or whether or not it could have been avoided.  
• ALL THIRD PARTY CONTENT OR SERVICES ACCESSIBLE VIA THIS DEVICE IS PROVIDED TO YOU ON AN "AS-IS" AND "AS AVAILABLE" BASIS  
AND SHARP AND ITS AFFILIATES MAKE NO WARRANTY OR REPRESENTATION OF ANY KIND TO YOU, EITHER EXPRESS OR IMPLIED,  
INCLUDING, WITHOUT LIMITATION, ANY WARRANTIES OF MERCHANTABILITY, NON- INFRINGEMENT, FITNESS FOR A PARTICULAR  
PURPOSE OR ANY WARRANTIES OF SUITABILITY, AVAILABILITY, ACCURACY, COMPLETENESS, SECURITY, TITLE, USEFULNESS, LACK  
OF NEGLIGENCE OR ERROR·FREE OR UNINTERRUPTED OPERATION OR USE OF THE CONTENT OR SERVICES PROVIDED TO YOU OR  
THAT THE CONTENT OR SERVICES WILL MEET YOUR REQUIREMENTS OR EXPECTATIONS.  
• SHARP IS NOT AN AGENT OF AND ASSUMES NO RESPONSIBILITY FOR THE ACTS OR OMISSIONS OF THIRD PARTY CONTENT OR  
SERVICE PROVIDERS, NOR ANY ASPECT OF THE CONTENT OR SERVICE RELATED TO SUCH THIRD PARTY PROVIDERS.  
• IN NO EVENT WILL SHARP AND/OR ITS AFFILIATES BE LIABLE TO YOU OR ANY THIRD PARTY FOR ANY DIRECT, INDIRECT, SPECIAL,  
INCIDENTAL, PUNITIVE, CONSEQUENTIAL OR OTHER DAMAGES. WHETHER THE THEORY OF LIABILITY IS BASED ON CONTRACT, TORT,  
NEGLIGENCE, BREACH OF WARRANTY, STRICT LIABILITY OR OTHERWISE AND WHETHER OR NOT SHARP AND/OR ITS AFFILIATES  
HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.  
57  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Troubleshooting  
Problem  
Possible Solution  
No power.  
TVa  
Check if you pressed  
on the remote control unit.  
TVa  
If the indicator on the TV lights up red, press  
Is the AC cord disconnected?  
Check if you pressed a on the TV.  
.
The TV cannot be operated.  
External influences such as lightning, static electricity, etc., may cause improper operation. In this  
case, operate the TV after first turning off the power, or unplugging the AC cord and re-plugging  
it in after one or two minutes.  
Remote control unit does not operate.  
Are batteries inserted with polarity (e, f) aligned?  
Are batteries worn out? (Replace with new batteries.)  
Are you using it under strong or fluorescent lighting?  
Is a fluorescent light illuminating the remote control sensor?  
Picture is cut off.  
Is the image position correct?  
Are screen mode adjustments (Picture format) such as picture size made correctly? (Page 31.)  
Strange colour, light colour, or dark  
colour, or colour misalignment.  
Adjust the picture tone.  
Is the room too bright? The picture may look dark in a room that is too bright.  
Check the “Picture” settings (Page 21).  
Power is suddenly turned off.  
No picture.  
The TVs internal temperature has increased.  
Clean or remove any objects blocking the vent.  
Are connections to external equipment correct? (Pages 41, 42 and 43)  
Is the input signal type selected correctly after connection? (Page 14)  
Is the correct input source selected? (Page 31)  
Is the picture adjustment correct? (Pages 21)  
Is the antenna connected properly? (Pages 7 and 14)  
No sound.  
Is the volume too low?  
Make sure that headphones are not connected.  
Check if you pressed e on the remote control unit.  
The TV sometimes makes a cracking  
sound.  
This is not a malfunction. This happens when the cabinet slightly expands and contracts  
according to changes in temperature. This does not affect the TVs performance.  
Information on the software license for this product  
Software composition  
The software included in this product is comprised of various software components whose individual copyrights are held by  
SHARP or by third parties.  
Software developed by SHARP and/or third part  
The copyrights for the software components and various relevant documents included with this product that were developed or  
written by SHARP are owned by SHARP and are protected by the Copyright Act, international treaties, and other relevant laws.  
This product also makes use of freely distributed software and software components whose copyrights are held by third parties.  
Environmental Specifications  
*1 Measured according to IEC 62087 Ed. 2.  
39"  
50"  
60"  
70"  
*2 Measured according to IEC 62301 Ed. 1.  
*3 Measured according to IEC 62301 Ed. 1.  
*4 Annual energy consumption is calculated  
on the basis of the On-Mode (HOME  
MODE) power consumption, watching  
TV 4 hours a day, 365 days a year.  
*1 On-Mode (W) (HOME MODE)  
*2 Standby-Mode (W)  
45 W  
70 W  
100 W  
0.24 W  
0.16 W  
146 kWh  
134 W  
0.24 W  
0.16 W  
196 kWh  
0.24 W  
0.16 W  
66 kWh  
0.24 W  
0.16 W  
102 kWh  
*3 Off Mode (W)  
*4 Annual Energy Consumption (kWh)  
EC Declaration of Conformity for AN-WUD630 dongle  
Hereby, SHARP Electronics (Europe) GmbH declares that the wireless LAN USB adapter (AN-WUD630) is in  
compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. The declaration of  
Important note  
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for  
product improvement without prior notice. The performance specification figures indicated are nominal values of production units.  
There may be some deviations from these values in individual units.  
58  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Appendix  
Specifications  
Item  
39” LCD COLOUR  
TV, Models:  
50” LCD COLOUR  
TV, Models:  
60” LCD COLOUR  
TV, Models:  
70” LCD COLOUR TV,  
Models:  
LC-39LE750E/RU/V  
LC-39LE751E/K/RU/V  
LC-39LE752E/RU/V  
LC-39LE754E/RU/V  
LC-39LU751E  
LC-50LE750E/RU/V  
LC-50LE751E/K/RU/V  
LC-50LE752E/RU/V  
LC-50LE754E/RU/V  
LC-50LU751E  
LC-60LE751E/K/RU  
LC-60LE752E/RU  
LC-60LE754E/RU  
LC-60LU751E  
LC-70LE751E/K/RU  
LC-70LE752E/RU  
LC-70LE754E/RU  
LC-39LM752E/V  
LC-39LK752E  
LC-50LM752E/V  
LC-50LK752E  
LC-60LM752E  
LC-60LK752E  
LC-39LX752E  
LC-50LX752E  
LC-60LX752E  
LCD Panel (LED TV)  
Resolution  
39” BLACK TFT  
50” BLACK TFT  
60” BLACK TFT  
70" BLACK TFT  
6.220.800 dots (1.920 x 1.080 pixels)  
PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60  
CCIR (B/G, I, D/K, L/L’)  
Video Colour System  
TV Standard  
Analogue  
Digital  
DVB-T (2K/8K OFDM)(H.264), DVB-C, DVB-C2 (LE754 only), DVB-T2(LE751/754 only),  
DVB-S/S2 (LE752/754 only)  
TV  
Func-  
tions  
Receiving  
Channel  
VHF/UHF  
CATV  
E2–E69 ch, F2–F10 ch, I21–I69 ch, IR A–IR J ch (Digital: IR A ch–E69 ch)  
Hyper-band, S1–S41 ch  
TV-Tuning System  
Auto Preset 999 ch: non-Nordic / 9999 ch: Nordic (ATV: 99 ch), Auto Label, Auto Sort  
STEREO / BILINGUAL  
NICAM/A2  
Viewing angles  
Audio Amplier  
Speaker  
H: 176°, V: 176°  
15 W + 15 W (Music power)  
(96 mm x 30mm) x 2  
TV Antenna  
VHF/UHF  
UHF/VHF 75 Ω Din type (Analogue & Digital)  
Satellite (752/754  
series only)  
75 Ω F type (DVB-S/S2)  
SERVICE  
SCART  
Ø 3.5 mm jack  
SCART (AV input, RGB input, TV output, Y/C input)  
VGA (D-Sub 15pin), Ø 3.5 mm jack (shared with HDMI)  
COMPONENT IN: Y/PB(CB)/PR(CR), RCA (AUDIO R/L)  
HDMI, Ø 3.5 mm jack (shared with PC INPUT), ARC, 3D.  
HDMI, Ø 3.5 mm jack (shared with PC INPUT), 3D.  
HDMI, Ø 3.5 mm jack (shared with PC INPUT), 3D.  
HDMI, Ø 3.5 mm jack (shared with PC INPUT), 3D.  
USB 2.0 HOST (A Type)  
PC INPUT  
COMPONENTS  
HDMI1  
Terminals  
HDMI2  
HDMI3  
HDMI4  
USB 1  
USB 2  
USB 2.0 HOST (A type)  
USB 3 (WIFI)  
USB 2.0 HOST (A type) (Wi-Fi use only)  
Network connector  
ETHERNET (10/100)  
AV  
RCA connector (AV input)  
S/PDIF OUT  
RCA S/PDIF digital audio output.  
C. I. (Common Interface)  
Headphones  
EN50221, R206001, CI+ specication  
Ø 3.5 mm jack (Audio output)  
Czech, Danish, Dutch, English, Estonian, Finnish, French, German, Greek, Hungarian, Italian,  
Latvian, Lithuanian, Norwegian, Polish, Portuguese, Russian, Slovak, Slovene, Spanish,  
Swedish, Turkish, Ukrainian, Byelorussian, Romanian, Croatian, Serbian.  
OSD language  
Power Requirement  
AC 220–240 V, 50 Hz  
Power Consumption (IEC62087 Method)  
99W  
121W  
175W  
229W  
(0.24W Stby)  
(0.24W Stby)  
(0.24W Stby)  
(0.24W Stby)  
Weight  
10.7Kg(Withoutstand)  
12.3 Kg (With stand)  
16.7Kg (Without stand)  
18.5Kg (With stand)  
24.3Kg (Without stand)  
27,3Kg (With stand)  
37.5Kg (Without stand)  
40.5Kg (With stand)  
Operating Temperature  
0 °C to +40 °C  
59  
Download from Www.Somanuals.com. All Manuals Search And Download.  
End of life disposal  
A. Information on Disposal for Users (private households)  
1. In the European Union  
Attention: If you want to dispose of this equipment, please do not use the ordinary dust bin!  
Used electrical and electronic equipment must be treated separately and in accordance with legislation that requires  
proper treatment, recovery and recycling of used electrical and electronic equipment.  
Following the implementation by member states, private households within the EU states may return their used  
electrical and electronic equipment to designated collection facilities free of charge*. In some countries* your local  
retailer may also take back your old product free of charge if you purchase a similar new one.  
*) Please contact your local authority for further details.  
Attention: Your product  
is marked with this  
symbol. It means that  
used electrical and  
electronic products  
should not be mixed  
with general household  
waste. There is a  
If your used electrical or electronic equipment has batteries or accumulators, please dispose of these separately  
beforehand according to local requirements.  
By disposing of this product correctly you will help ensure that the waste undergoes the necessary treatment, recovery  
and recycling and thus prevent potential negative effects on the environment and human health which could otherwise  
arise due to inappropriate waste handling.  
separate collection  
system for these  
products.  
2. In other Countries outside the EU  
If you wish to discard this product, please contact your local authorities and ask for the correct method of disposal.  
For Switzerland: Used electrical or electronic equipment can be returned free of charge to the dealer, even if you don’t  
B. Information on Disposal for Business Users  
1. In the European Union  
If the product is used for business purposes and you want to discard it:  
Please contact your SHARP dealer who will inform you about the take-back of the product. You might be charged for  
the costs arising from take-back and recycling. Small products (and small amounts) might be taken back by your local  
collection facilities.  
For Spain: Please contact the established collection system or your local authority for take-back of your used  
products.  
2. In other Countries outside the EU  
If you wish to discard of this product, please contact your local authorities and ask for the correct method of disposal.  
The battery supplied with this product contains traces of Lead.  
For EU: The crossed-out wheeled bin implies that used batteries should not be put to the general household waste!  
There is a separate collection system for used batteries, to allow proper treatment and recycling in accordance with  
legislation. Please contact your local authority for details on the collection and recycling schemes.  
For Switzerland: The used battery is to be returned to the selling point.  
For other non-EU countries: Please contact your local authority for correct method of disposal of the used battery.  
Trademarks  
• “HDMI, the HDMI logo and High-Definition Multimedia Interface are trademarks or registered trademarks of HDMI Licensing LLC.”  
• Manufactured under license from Dolby Laboratories.  
• “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.  
• The “HD TV 1080p” Logo is trademark of DIGITALEUROPE.  
• The DVB logo is the registered trademark of the Digital Video Broadcasting—DVB—project.  
• DivX®, DivX Certified® and associated logos are trademarks of Rovi Corporation or its subsidiaries and are used under  
license.  
• The “CI Plus” Logo is a trademark of CI Plus LLP.  
• DLNA®, the DLNA Logo and DLNA CERTIFIED™ are trademarks, service marks, or certification marks of the Digital Living  
Network Alliance.  
• All other company or product names are trademarks or registered trademarks of their respective companies.  
60  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LC-39LE750E/V  
LC-39LE751E/K/V  
LC-39LU751E  
LC-39LE752E/V  
LC-39LM752E/V  
LC-39LK752E  
LC-50LE750E/V  
LC-50LE751E/K/V  
LC-50LU751E  
LC-50LE752E/V  
LC-50LM752E  
LC-50LK752E  
LC-50LX752E  
LC-50LE754E/V  
LC-60LE751E/K  
LC-60LU751E  
LC-60LE752E  
LC-60LM752E  
LC-60LK752E  
LC-60LX752E  
LC-60LE754E  
LC-70LE751E/K  
LC-70LE752E  
LC-39LX752E  
LC-39LE754E/V  
LC-70LE754E  
(91)  
[110]  
[(132)]  
(41)  
[41]  
[(41)]  
(881) / [1123] / [(1368)]  
(859) / [1100] / [(1335)]  
(470) / [470] / [(584)]  
(200) / [400] / [(400)]  
(253) / [301] / [(351)]  
39”: ( )  
50”: [ ]  
60”: [( )]  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SHARP CORPORATION  
Sharp Electronics Europe Ltd.  
4 Furzeground Way, Stockley Park  
Uxbridge, Middlesex, UB11 1EZ, UK  
Tiskano u Poljskoj  
Štampano u Poljskoj  
Tiskano v Poljska  
Wydrukowano w Polsce  
Készült Lengyelországban  
Vytištěno v Polsku  
Vytlačené v Poľsku  
Надруковано в Польщі  
Trükitud Poolas  
Iespiests Polijā  
Išspausdinta Lenkijoje  
Τυπώθηκε στην Πολωνία  
Polonya’da basılmıştır  
Tipărit în Polonia  
Надрукавана ў Польшча  
Printed in Poland  
PIN  
TINS-F657WJZZ  
13P04-PL-NG  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Server Technology Frozen Dessert Maker Series 93I User Manual
Sharp CD Player MD MT80H User Manual
Sharp Convection Oven R 963S User Manual
Sharp Printer MX 6500N User Manual
Smooth Fitness Treadmill 545 User Manual
Sony Camera Accessories ERA MS008 User Manual
Sony Computer Accessories VGP BPS22A User Manual
Sony Headphones MDR NC22 User Manual
Sony Stereo System XL HF200PBK User Manual
Sylvania TV DVD Combo 6719DB User Manual