Sharp Computer Monitor LL S201A User Manual

LL-S201A  
LCD MONITOR  
OPERATION MANUAL  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT INFORMATION  
WARNING: TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK, DO NOT EXPOSE THIS PRODUCT  
TO RAIN OR MOISTURE.  
The lightning flash with arrowhead symbol, within  
a triangle, is intended to alert the user to the  
presence of uninsulated “dangerous voltage”  
CAUTION  
within the product’s enclosure that may be of  
sufficient magnitude to constitute a risk of electric  
shock to persons.  
RISK OF ELECTRIC  
SHOCK  
DO NOT OPEN  
The exclamation point within a triangle is  
intended to alert the user to the presence of  
important operating and maintenance (servicing)  
instructions in the literature accompanying the  
product.  
CAUTION: TO REDUCE THE RISK OF ELECTRIC  
SHOCK, DO NOT REMOVE COVER.  
NO USER-SERVICEABLE PARTS  
INSIDE.  
REFER SERVICING TO QUALIFIED  
SERVICE PERSONNEL.  
E
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
DEAR SHARP CUSTOMER  
Thank you for your purchase of a SHARP LCD product. To ensure safety and many years of trouble-free operation of your  
product, please read the Safety Precautions carefully before using this product.  
SAFETY PRECAUTIONS  
Electricity is used to perform many useful functions, but it can also cause personal injuries and property damage if improperly  
handled. This product has been engineered and manufactured with the highest priority on safety. However, improper use can  
result in electric shock and/or fire. In order to prevent potential danger, please observe the following instructions when installing,  
operating and cleaning the product. To ensure your safety and prolong the service life of your LCD product, please read the  
following precautions carefully before using the product.  
1. Read instructions — All operating instructions must be read and understood before the product is operated.  
2. Keep this manual in a safe place — These safety and operating instructions must be kept in a safe place for future  
reference.  
3. Observe warnings — All warnings on the product and in the instructions must be observed closely.  
4. Follow instructions — All operating instructions must be followed.  
5. Cleaning — Unplug the power cord from the AC outlet before cleaning the product. Use a dry cloth to clean the product. Do  
not use liquid cleaners or aerosol cleaners.  
6. Attachments — Do not use attachments not recommended by the manufacturer. Use of inadequate attachments can result  
in accidents.  
7. Water and moisture — Do not use the product near water. Do not install the product in a place where water may splash onto  
it. Be careful of equipment which drains water such as an air-conditioner.  
8. Ventilation — The vents and other openings in the cabinet are designed for ventilation.  
Do not cover or block these vents and openings since insufficient ventilation can cause overheating and/or shorten the life  
of the product. Do not place the product on a sofa, rug or other similar surface, since they can block ventilation openings.  
Do not place the product in an enclosed place such as a bookcase or rack, unless proper ventilation is provided or the  
manufacturer’s instructions are followed.  
9. Power cord protection — The power cords must be routed properly to prevent people from stepping on them or objects from  
resting on them.  
10. The screen used in this product is made of glass. Therefore, it can break when the product is dropped or applied with  
impact. Be careful not to be injured by broken glass pieces in case the screen breaks.  
11. Overloading — Do not overload AC outlets or extension cords. Overloading can cause fire or electric shock.  
12. Entering of objects and liquids — Never insert an object into the product through vents or openings. High voltage flows in  
the product, and inserting an object can cause electric shock and/or short internal parts.  
For the same reason, do not spill water or liquid on the product.  
13. Servicing — Do not attempt to service the product yourself. Removing covers can expose you to high voltage and other  
dangerous conditions. Request a qualified service person to perform servicing.  
14. Repair — If any of the following conditions occurs, unplug the power cord from the AC outlet, and request a qualified service  
person to perform repairs.  
a. When the power cord or plug is damaged.  
b. When a liquid was spilled on the product or when objects have fallen into the product.  
c. When the product has been exposed to rain or water.  
d. When the product does not operate properly as described in the operating instructions.  
Do not touch the controls other than those described in the operating instructions. Improper adjustment of controls  
not described in the instructions can cause damage, which often requires extensive adjustment work by a qualified  
technician.  
e. When the product has been dropped or damaged.  
f. When the product displays an abnormal condition. Any noticeable abnormality in the product indicates that the product  
needs servicing.  
15. Replacement parts — In case the product needs replacement parts, make sure that the service person uses replacement  
parts specified by the manufacturer, or those with the same characteristics and performance as the original parts. Use of  
unauthorized parts can result in fire, electric shock and/or other danger.  
16. Safety checks — Upon completion of service or repair work, request the service technician to perform safety checks to  
ensure that the product is in proper operating condition.  
17. Wall mounting — When mounting the product on a wall, be sure to install the product according to the method  
recommended by the manufacturer.  
18. Heat sources — Keep the product away from heat sources such as radiators, heaters, stoves and other heat-generating  
products (including amplifiers).  
E
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
SAFETY PRECAUTIONS (Continued)  
19. Usage of the monitor must not be accompanied by fatal risks or dangers that, could lead directly to death, personal injury,  
severe physical damage or other loss, including nuclear reaction control in nuclear facility, medical life support system, and  
missile launch control in a weapon system.  
20. Do not touch the parts of the product or the AC adapter that become hot for long periods of time. Doing so may result in  
low-temperature burns.  
To maintain compliance with EMC regulations, use shielded cables to connect to the following terminals: HDMI input terminal  
and DisplayPort input terminal.  
If a monitor is not positioned in a sufficiently stable location, it can be potentially hazardous due to falling. Many injuries,  
particularly to children, can be avoided by taking simple precautions such as:  
Using fixing devices like wall mount brackets recommended by the manufacturer.  
Only using furniture that can safely support the monitor.  
Ensuring the monitor is not overhanging the edge of the supporting furniture.  
Not placing the monitor on tall furniture (for example, cupboards or bookcases) without anchoring both the furniture and the  
monitor to a suitable support.  
Not standing the monitors on cloth or other materials placed between the monitor and supporting furniture.  
Educating children about the dangers of climbing on furniture to reach the monitor or its controls.  
E
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
TIPS AND SAFETY INSTRUCTIONS  
-
The TFT color LCD panel used in this monitor is made with  
the application of high precision technology. However, there  
may be minute points on the screen where pixels never light  
or are permanently lit. Also, if the screen is viewed from  
an acute angle there may be uneven colors or brightness.  
Please note that these are not malfunctions but common  
phenomena of LCDs and will not affect the performance of  
the monitor.  
The Power Cord and AC adapter  
-
Use only the power cord and AC adapter supplied with the monitor.  
- When handling the AC adapter, observe the following:  
Incorrect handling may result in fire, electric shock, or injury.  
• Do not drop the AC adapter or subject it to impact.  
• Never disassemble the AC adapter. It contains high  
voltage parts that are dangerous to touch.  
• The AC adapter is for indoor use only. Do not use it  
outside.  
- Do not display a still picture for a long period, as this could  
cause a residual image.  
• Do not use the supplied AC adapter with other devices.  
- Never rub or tap the monitor with hard objects.  
- Do not damage the power cord and AC adapter nor place  
heavy objects on it, stretch it or over bend it. Also, do not  
add extension cords. Damage to the cord may result in fire  
or electric shock.  
- Please understand that SHARP CORPORATION bears no  
responsibility for errors made during use by the customer  
or a third party, nor for any other malfunctions or damage  
to this product arising during use, except where indemnity  
liability is recognized under law.  
-
Do not use the power cord with a power tap.  
Adding an extension cord may lead to fire as a result of  
overheating.  
- This monitor and its accessories may be upgraded without  
advance notice.  
- Do not remove or insert the power plug with wet hands.  
Doing so could result in electric shock.  
- Do not use the monitor where there is poor ventilation,  
where there is a lot of dust, where humidity is high, or where  
the monitor may come into contact with oil or steam.  
- Unplug the power cord if it is not used for a long time.  
-
Do not attempt to repair the power cord if it is broken  
or malfunctioning. Refer the servicing to the service  
representative.  
- Ensure that the monitor does not come into contact with  
water or other fluids. Ensure that no objects such as paper  
clips or pins enter the monitor as this could lead to fire or  
electric shock.  
- Do not stay in contact with the parts of the product and the  
AC adapter that become hot for long periods of time.  
Doing so may result in low-temperature burns.  
- Do not place the monitor on top of unstable objects or in  
unsafe places. Do not allow the monitor to receive strong  
shocks or to strongly vibrate. Causing the monitor to fall or  
topple over may damage it.  
- For your health, observe the following:  
• If using the monitor continuously, take a 10- to 15-minute  
break every hour to rest your eyes.  
- Continuous Operation Time and Warranty  
This product has been designed based on the assumption  
of 15 or fewer hours of usage in one day. Continuous usage  
that exceeds 15 hours in one day is not covered by the  
warranty.  
• Do not use the monitor in high-contrast light conditions.  
• Do not use the monitor in locations where the screen is  
subject to direct sunlight.  
Manual Scope  
- Microsoft, Windows and Windows Vista are registered  
trademarks of Microsoft Corporation.  
- Do not use the monitor near heating equipment or in places  
where there is likelihood of high temperature, as this may  
lead to generation of excessive heat and outbreak of fire.  
-
The terms HDMI and HDMI High-Definition Multimedia Interface,  
and the HDMI Logo are trademarks or registered trademarks of  
HDMI Licensing LLC in the United States and other countries.  
- Do not use the monitor in places where it may be exposed  
to direct sunlight.  
- DisplayPort is a registered trademark of Video Electronics  
Standards Association.  
- The AC outlet shall be installed near the equipment and  
shall be easily accessible.  
- Adobe, Acrobat, and Reader are either registered  
trademarks or trademarks of Adobe Systems Incorporated  
in the United States and/or other countries.  
- Do not touch the screen when starting the LCD monitor.  
If the screen is touched, the monitor may not function  
correctly. In this situation, turn the LCD monitor off, wait at  
least 5 seconds, and then turn on the monitor again.  
- Intel, Celeron, and Intel Core 2 Duo are trademarks or  
registered trademarks of Intel Corporation or its subsidiaries  
in the U.S.A. and other countries.  
- Do not operate the screen with a hard or pointed object  
such as a fingernail, pen other than the included touch pen,  
or a sharp pencil.  
- AMD, AMD Sempron, AMD Athlon, and combinations  
thereof are trademarks of Advanced Micro Devices, Inc.  
- Depending on the application used, the supplied touch pen  
may not function.  
- MHL, the MHL logo, and Mobile High-Definition Link are  
trademarks or registered trademarks of MHL, LLC in the  
United States and other countries.  
-
If another USB device is connected to the computer to which  
the touch panel is connected, do not operate the USB device  
during touch panel input. Input may not take place correctly.  
- All other brand and product names are trademarks or  
registered trademarks of their respective holders.  
- Do not use liquid such as alcohol in cleaning the screen.  
- Language of OSD menu used in this manual is English by  
way of example.  
- Keep all cables off the touch panel. Not doing so may lead  
to LCD monitor malfunctions.  
- Illustrations in this manual may not exactly represent the  
- If used in a room (or location) with drastic temperature  
differences, the display quality of the screen and the quality  
of touch panel performance may decrease.  
actual product or display.  
LED Backlight  
● The LED backlight in this product has a limited lifetime.  
*
If the screen gets dark or does not turn on, it may be  
necessary to replace the LED backlight. This LED backlight  
is exclusive to this product and must be replaced by an  
authorized SHARP servicing dealer or service center.  
* Please contact your local SHARP servicing dealer or  
service center for assistance.  
E
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
IMPORTANT INFORMATION............................................3  
Turning Power On/Off....................................................13  
Turning on the power .................................................13  
Turning off the power .................................................13  
Touch Action ..................................................................14  
Touch action modes ...................................................14  
Touch action...............................................................14  
Other functions...........................................................16  
Cautionary points .......................................................16  
Monitor Settings ............................................................17  
Menu operations ........................................................17  
Menu functions...........................................................18  
SETUP Menu Details .................................................19  
Prohibiting operations (operation lock).......................20  
Monitor status indicators ............................................21  
Troubleshooting.............................................................22  
Specifications ...............................................................23  
DEAR SHARP CUSTOMER..............................................4  
SAFETY PRECAUTIONS..................................................4  
TIPS AND SAFETY INSTRUCTIONS...............................6  
Supplied Components.....................................................7  
System Requirements.....................................................7  
Part Names.......................................................................8  
Binding Cables.................................................................9  
Connecting Peripheral Equipment.................................9  
Connection with a PC...................................................9  
Connecting headphones (commercially available).....10  
Connecting the monitor to a power source ................10  
Installation......................................................................11  
Standing position........................................................11  
Pen writing position....................................................12  
Horizontal position......................................................12  
For information on the Pen Software, see the Pen Software Operation Manual.  
Supplied Components  
If any component should be missing, please contact your dealer.  
Liquid Crystal Display Monitor: 1  
Power cord: 1  
CD-ROM (Utility Disk): 1  
Setup Manual: 1  
AC adapter: 1  
USB cable (USB-microUSB Type B): 1  
Stand (front, back, bottom cover, fixing screws: 2): 1  
Touch pen: 1  
* SHARP Corporation holds authorship rights to the Utility Disk program. Do not reproduce it without permission.  
* Keep packaging for use when transporting monitor, etc.  
System Requirements  
Touch Panel  
n
To use the touch panel, the monitor must be connected to a computer using a USB cable.  
Touch panel operating conditions are as described below.  
Computer  
PC/AT compatible computer with a USB 1.1 port and able to output a resolution of 1920 x 1080.  
Windows 8 (32-bit or 64-bit version), Windows 7 (32-bit or 64-bit version), Windows Vista (32-bit or  
64-bit version), Windows XP (32-bit or 64-bit version)  
OS  
• Windows 7 or later is recommended for touch action.  
• On Windows 7 and later, the touch panel operates with the standard Window driver. On Windows Vista/XP, you must install  
the touch panel driver to your PC from the included CD-ROM.  
Pen Software  
n
Operating conditions for the included Pen Software are as described below. To install Pen Software, refer to the Pen Software  
Operation Manual. Pen Software is for use with monitors installed in landscape orientation.  
PC/AT compatible computer able to output a resolution of 1920 x 1080.  
(CD-ROM drive required for software installation.)  
Computer  
Windows 8 (32-bit or 64-bit version), Windows 7 (32-bit or 64-bit version), Windows Vista (32-bit or  
64-bit version), Windows XP (32-bit or 64-bit version)  
OS  
Intel Celeron or AMD Sempron 1.6 GHz or faster  
Intel Core 2 Duo or AMD Athlon II X2 2.8 GHz or faster recommended  
CPU  
Memory  
At least 2 GB (at least 1 GB for Windows XP)  
Free space on hard drive At least 100 MB (free space separately required for data storage)  
E
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Part Names  
Front view  
n
1. Power LED (See page 13.)  
1
Rear view  
n
4
3
1
2
4
7
8
9
10  
11  
5
12  
6
1. Flap (See page 12.)  
2. VESA holes (See page 24.)  
3. Anti-theft hole ( )  
Allows the monitor to be secured using a commercially  
available anti-theft lock. The anti-theft hole is compatible  
with Kensington’s MicroSaver security system.  
4. Speakers  
5. Power/Menu button (See page 13, page 17.)  
6. Cable clamp (See page 9.)  
7. Headphone jack (See page 10.)  
8. HDMI input terminal (See page 9.)  
9. DisplayPort input terminal (See page 9.)  
10. Micro-USB terminal (See page 10.)  
11. AC adapter connection terminal (See page 10.)  
12. Tabs (See page 12.)  
E
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Binding Cables  
Secure the HDMI cable, DisplayPort cable, and USB cable using the cable clamp.  
1. Remove the cable clamp.  
2. Route the cables through the cable  
restraint slot.  
3. Push the cable clamp down into place.  
Cable restraint  
slot  
Cable clamp  
Cable clamp  
Caution  
• When connecting cables, spread a soft cloth on a stable level surface such as a desk, and gently place the monitor on it with  
the screen facing down.  
Connecting Peripheral Equipment  
DisplayPort input terminal  
Caution  
• Be sure to turn off the power and disconnect the plug from  
the power outlet before connecting/disconnecting cables.  
Also, read the manual of the equipment to be connected.  
• Do not forcibly bend or apply force to cables. Doing so may  
result in wire breakage or other damage.  
Commercially available DisplayPort cable  
• When connecting cables, spread a soft cloth on a stable  
level surface such as a desk, and gently place the monitor  
on it with the screen facing down.  
• Do not use any cable that has a damaged or deformed  
terminal. Using such cables may cause malfunctions.  
To DisplayPort output  
terminal on PC  
DisplayPort input terminal  
TIPS  
Check the orientation of the connector and insert it horizontally  
• Images may not be displayed properly depending on the  
as far as it will go.  
computer (video card) to be connected.  
TIPS  
• The length of the signal cables or surrounding environment  
may affect the image quality.  
Connection with a PC  
• The video from the terminal that has signal input is  
displayed. In this state, even if a signal is input from the  
other terminal, the display is not switched. To switch the  
display, use [Input Select] on the menu screen. (See page  
18.)  
• If the LCD monitor is turned on when there are input signals  
from both terminals, the video from the DisplayPort input  
terminal is displayed.  
Connect the monitor and a PC using the connection cable.  
Inputting video and audio  
n
HDMI input terminal  
Commercially available HDMI cable  
(conforming to the HDMI standard)  
To HDMI output  
terminal on PC  
HDMI input terminal  
Check the orientation of the connector and insert it horizontally  
as far as it will go.  
• It is possible to connect the monitor’s HDMI input terminal  
to a smartphone or similar MHL-compliant device using a  
commercially available MHL cable.  
This production incorporates MHL 1.  
E
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connecting Peripheral Equipment  
Using the touch panel  
To use the touch panel, connect the monitor to a USB port on  
a PC using the supplied USB cable.  
n
Connecting headphones  
(commercially available)  
Headphones (commercially available) with a stereo mini plug  
(φ 3.5 mm) can be connected to the monitor.  
φ 3.5 mm stereo mini plug of commercially  
available headphones  
Supplied USB cable  
To USB port on PC  
Micro-USB terminal  
Headphone jack  
Check the orientation of the connector and insert it horizontally  
as far as it will go.  
TIPS  
• When headphones are connected it will no longer be  
possible to hear sound from the monitor’s speakers.  
• Volume can be adjusted using [Volume] on the menu  
screen. (See page 18.)  
• The volume is set to 0 when the monitor is shipped from  
the factory.  
Connecting the monitor to a power source  
Caution  
• Use only the AC adapter and power cord supplied with the monitor.  
1. Connect the monitor to the power outlet using the supplied AC adapter and power cord.  
Back of monitor  
For power  
outlet  
AC adapter  
connection terminal  
Power cord  
(Supplied)  
AC adapter (Supplied)  
Core restraine  
AC adapter core  
2. Push the AC adapter core into the core restrainer.  
E
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
The monitor can be installed in three different ways.  
Mounting the monitor on the stand  
n
1. Place the stand on a level surface.  
Standing position  
Place the monitor on the supplied stand.  
Caution  
• The stand is for use in landscape orientation. It cannot be  
used for portrait orientation.  
2. Set the monitor on the stand.  
Assembling the stand  
1. Insert the back into the front.  
n
Set the monitor so that the logo in the center is aligned with  
the circle mark on the stand.  
Align the mark () on the front with the edge of the back  
and insert the back from above.  
Back  
Back  
Front  
Logo  
Front  
2. Slide the back across.  
Slide the back until it clicks into place.  
Circle mark  
Back  
3. Attach the bottom cover.  
Align the arrow on the bottom cover so that it points toward  
the front, and press the projections on the bottom cover  
into the pocket on the front and back.  
Front  
Back  
TIPS  
Front pocket  
Back pocket  
• The stand and the monitor can be secured with fixing  
screws.  
Projection  
Arrow  
Bottom cover  
Fixing screws (supplied)  
E
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Installation  
Disassembling the stand  
n
Horizontal position  
1. Remove the bottom cover.  
Place the monitor on a table or other level surface.  
Push the tabs in towards the center and pull.  
Caution  
Tabs  
• When using the monitor horizontally, use the horizontal tab  
in the upright position.  
1. Lift up the two tabs on the back of the monitor.  
Bottom cover  
2. Remove the back from the front.  
Depress the button on the front and slide the back across,  
then pull the back up.  
Back  
Button  
Front  
2. Place the monitor where you want to use it.  
Pen writing position  
Place the monitor at an angle on a table or other level surface.  
1. Hold the flap by the depression on the back of the  
monitor and pull the flap up.  
Caution  
• Do not exert a large amount of force on the monitor from  
above. Doing so may damage the tabs.  
Depression  
2. Place the monitor where you want to use it.  
Caution  
• Do not exert a large amount of force on the monitor from  
above. Doing so may damage the flap.  
E
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Turning Power On/Off  
Turning on the power  
Turning off the power  
1. Press the POWER button.  
1. Turn off the PC.  
2. Depress the POWER button for around 2 seconds.  
POWER button  
POWER button  
Press  
Depress for around  
2 seconds  
The power LED turns off.  
Power LED  
The power LED turns on.  
Caution  
• If the monitor will not be used for a long time, disconnect  
the power plug from the power outlet.  
2. Turn on the PC.  
The screen appears.  
Status  
Green lit  
Status of the monitor  
Signal input  
No signal input  
Orange lit  
Caution  
• When switching the POWER button off and back on,  
always wait for an interval of at least 5 seconds. Rapid  
switching may lead to errors or malfunctions.  
• For a complete electrical disconnection, pull out the main  
plug.  
E
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Touch Action  
Common finger and touch pen actions  
n
Touch action modes  
Single-tap  
There are three touch action modes: finger/pen mode, pen-  
only mode, and finger-only mode. These modes can be  
changed on the menu screen.  
Touch the screen with your finger/touch pen.  
The monitor is set to finger/pen mode when shipped.  
Finger/pen mode  
In this mode, the screen can be touched with your finger or  
with the touch pen.  
While the screen is being touched with the touch pen, touch  
pen operation is given priority and you cannot touch the  
screen with your finger.  
Once the touch pen has been moved away from the screen for  
around 1 second, you can touch the screen with your finger.  
Double-tap  
Quickly touch the screen twice with your finger/touch pen.  
Pen-only mode  
This mode is for touch pen use only. You cannot touch the  
screen with your finger. You can touch the menu screen (See  
page 17) with your finger.  
Finger-only mode  
This mode is for finger use only. You cannot touch the screen  
with the touch pen.  
Touch action  
Swipe  
Touch the screen with your finger/touch pen, move without  
lifting, and then stop.  
Touch actions that can be used with this monitor differ  
according to operating system and application. The functions  
of touch actions are also different. For details, check Windows  
Help and the application’s support documentation.  
OS  
Windows Vista  
Windows XP *  
Windows 8 Windows 7  
Touch action  
Single-tap  
Double-tap  
Swipe  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
No  
Yes  
Yes  
Yes  
Swipe from edge  
of screen  
No  
Drag-and-drop  
Slide to pan  
Flicks  
Yes  
Yes  
Yes  
Yes  
Yes  
No  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
Yes  
No  
No  
No  
No  
No  
No  
Swipe from edge of screen  
After touching the edge of the monitor with your finger/touch  
pen, move horizontally without releasing your finger/touch pen  
and then stop.  
Press-and-hold  
Zoom  
Press-and-tap  
Rotate  
Yes  
* You must install the touch panel driver to your PC from the  
included CD-ROM.  
TIPS  
• In Windows 7, if the checkmark has been removed from  
“Enable multi-touch gestures and inking” in “Pen and touch”  
in Control Panel, select the checkbox.  
E
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Touch Action  
Drag-and-drop  
Finger actions  
Zoom  
While touching the screen with two fingers, move them closer  
together and farther apart.  
n
Touch the screen with your finger/pen and move without lifting.  
When you have finished the movement, lift your finger/touch  
pen.  
Slide to pan  
Pinch  
With your finger/touch pen touching the screen, move it up  
and down to scroll the screen.  
Stretch  
Press-and-tap  
Flicks  
With one finger touching the screen, tap once (single tap) with  
another finger.  
Move your finger/touch pen in a flicking motion.  
Tap once (single tap) with another finger  
Flick your finger  
With one finger touching  
Press-and-hold  
Rotate  
Press briefly with your finger/touch pen, and then lift your  
finger/touch pen from the screen.  
While touching the monitor with one finger, move the other  
finger in the direction you wish to rotate in.  
Move another finger in the desired direction of rotation  
With one finger touching  
E
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Touch Action  
Other functions  
In Windows 8, input panel functions can be used.  
In Windows 7, touch pointer and input panel functions can be  
used.  
For information about the touch pointer and input panel  
functions, see Windows Help.  
Touch pointer :  
A translucent image of a mouse appears near the point  
touched. The left/right buttons of the image can be clicked  
to perform the same actions as left/right clicking a mouse.  
Input panel :  
A software keyboard and an input panel with handwriting  
recognition appear on the screen.  
Windows 8 and Windows 7 (excluding Starter), the ink  
function of Microsoft Office can be used.  
Handwritten comments can be written, and handwriting can  
be recognized.  
For details, see Microsoft Office Help.  
Cautionary points  
• When performing touch actions, use the ball of your finger.  
• When performing pen actions, use the included touch pen.  
• Do not use the touch pen for any purpose other than touch  
panel operation.  
• Do not press hard on the tip of the touch pen.  
• If there is dirt or foreign matter on the tip of the touch pen,  
remove it. Failure to do so may damage the screen.  
• Even when in pen-only mode, the monitor may respond to  
objects other than the included touch pen.  
• When performing pen actions with the included touch pen,  
do not touch the screen with anything other than the hand  
that is holding the pen.  
E
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Monitor Settings  
4. Touch [Exit] or press the MENU button.  
The menu screen disappears.  
Menu operations  
The monitor settings are configured by displaying the menu  
screen.  
The operations on this page are the basic operations.  
Caution  
• Do not turn off the power while the menu screen is  
displayed. Doing so may initialize the settings.  
• While the menu screen is displayed, touch actions are not  
possible other than those for the menu screen.  
30  
Example of operation  
Return  
n
Mute  
Operations on the menu screen are described here using  
adjusting the volume as an example.  
1. Press the MENU button.  
The menu screen appears.  
Touch [Return] to return to the level above.  
MENU button  
30  
Exit  
Rn  
Mute  
Press  
2. Touch [Volume].  
TIPS  
• If no actions are made on the adjustment bar display  
screen for around 10 seconds, the screen returns to the  
ordinary display screen.  
• The menu screen can also be operated using your finger in  
pen-only mode.  
3. Touch the adjustment bar and slide your finger to  
either side to adjust the volume.  
30  
Exit  
Return  
Mute  
Adjustment bar  
E
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Monitor Settings  
Menu functions  
Setup  
Input Select Volume  
Rotation Finger-only Pen-only Finger/pen  
mode mode mode  
Touch mode selection  
Touch mode selection  
These icons switch the touch action mode.  
A ( ) mark is displayed at the top of the icon for the selected  
mode.  
Input Select  
The mode can be checked with the touch mark located at the  
upper-right portion of the screen. (See pages 19, 21)  
This icon manually switches the signal input source from the  
PC.  
Touching the icon displays HDMI and DisplayPort.  
A ( ) mark is added to the input source being displayed.  
Finger/pen mode  
Setup  
This icon switches the touch action mode to finger/pen  
mode.  
The touch mark becomes the finger/pen mark  
.
This icon configures the monitor.  
For details on individual settings, see page 19.  
Pen-only mode  
This icon switches the touch action mode to pen-only  
mode.  
The touch mark becomes the pen mark  
.
Finger-only mode  
This icon switches the touch action mode to finger-only  
mode.  
The touch mark becomes the finger-only mark  
.
Rotation  
This icon lets you rotate the screen 180°.  
When the monitor is rotated, a ( ) mark is displayed at the  
top of the icon.  
The rotate mark  
also appears on the screen. (See pages  
19, 21)  
Volume  
This icon adjusts speaker and headphone volume.  
Touching [Mute] temporarily sets the volume to 0.  
Touching [Mute] again returns the volume to the previous  
level.  
E
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Monitor Settings  
SETUP Menu Details  
Other  
Other  
Position  
Position  
Mode on Start Up  
n
Touch Mode  
When the monitor is used in portrait orientation (power/menu  
button on the top), this icon moves the display position of the  
menu screen to the bottom of the screen.  
This setting configures the touch action mode (See page 18)  
used when the monitor is turned on.  
[Reset] :The monitor starts in finger/pen mode.  
[Save] : The monitor starts in the mode that was last used.  
Mode  
Mode  
Rotate Mode  
This setting configures the rotate setting (See page 18) used  
when the monitor is turned on.  
Normal  
[Reset] :The monitor starts with rotate disabled.  
[Save] : The monitor starts in the mode that was last used.  
This mode is suited to normal PC screen display.  
Pen Writing  
Position  
This setting configures the menu display position used when  
the monitor is turned on.  
[Reset] :The monitor starts with the menu display position on  
the bottom of landscape orientation.  
This mode is suited to pen writing position.  
Game  
This mode is suited to video games.  
Multimedia  
[Save] : The monitor starts in the mode that was last used.  
This mode is suited to video playback.  
User  
Mark  
n
Touch Mark  
The user can adjust the image quality.  
This setting configures how to display the touch mark (See  
page 21).  
Rotation Mark  
This setting configures how to display the rotation mark (See  
Brightness  
page 21).  
Brightness  
Key Mark  
This icon adjusts the brightness of the backlight.  
This setting configures how to display the key mark (See page  
20).  
Mark Position  
This setting configures the display position of the status  
display mark (touch mark/rotation mark/key mark) on the  
screen.  
Logo Screen  
n
This setting configures whether or not to display the  
logo screen during startup.  
[On]: The logo screen is displayed when the monitor starts.  
[Off]: The logo screen is not displayed when the monitor  
starts.  
Language  
Language  
This setting changes the menu screen display language.  
Reset  
Reset  
This setting resets all settings to their factory default.  
E
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Monitor Settings  
Operation lock is enabled.  
A key mark is displayed on the screen and it disappears  
after around 5 seconds.  
Prohibiting operations (operation lock)  
This function makes it possible to prohibit operations to turn  
the power off and to prohibit touch action on the screen.  
If an operation is attempted when the monitor is locked, a key  
mark  
is displayed for around 5 seconds. (See page 21)  
TIPS  
• If the menu screen is displayed when locked, the invalid  
action mark is displayed.  
Caution  
• When the MENU button is pressed, the menu screen  
appears and only the disable operation lock and exit menu  
operation are possible.  
Locking operation  
n
1. Press the MENU button.  
The menu screen appears.  
Invalid action mark  
MENU button  
Press  
2. While touching [Volume], touch [Finger-only mode] for  
at least 1 second.  
E
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Monitor Settings  
Disabling operation lock  
1. Press the MENU button.  
n
Monitor status indicators  
Monitor status is displayed at the top right of the screen.  
The menu screen is displayed.  
Touch Mark  
Rotation Mark  
Key Mark  
MENU button  
Touch Mark  
The touch mark displays the current touch action mode.  
Press  
Finger/pen mode  
2. While touching [Volume], touch [Finger-only mode] for  
at least 1 second.  
This mark is displayed during finger/pen mode.  
Pen-only mode  
This mark is displayed during pen-only mode.  
Finger-only mode  
This mark is displayed during finger-only mode.  
After being set, it can be set so that it is only displayed for  
around 5 seconds. (See page 19.)  
Rotation Mark  
This mark is displayed when the rotate function is enabled.  
After being set, it can be set so that it is only displayed for  
around 5 seconds. (See page 19.)  
Key Mark  
When operation lock (See page 20) is set, the mark is  
displayed for around 5 seconds when the screen is touched.  
It can be set to display constantly. (See page 19.)  
TIPS  
Operation lock is disabled.  
• The display position can be changed from the menu  
screen. (See page 19)  
• These marks are not displayed while the menu screen is  
displayed.  
E
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
If you are experiencing any problem with your display, before  
calling for service, please review the following troubleshooting  
tips.  
There is no picture or sound.  
• Are the AC adapter and power cord connected correctly?  
(See page 10.)  
• Is the power on? (See page 13.)  
There is a picture but no sound.  
• Make sure the volume is not set to minimum. (See page  
18.)  
• Is the sound muted? (See page 18.)  
• When headphones are connected, no sound will come from  
the speakers. (See page 10.)  
• No sound will come from the speakers when the monitor  
is in standby mode (when the power LED is orange). (See  
page 13.)  
The video does not appear.  
• Is the cable certified for HDMI or DisplayPort? The monitor  
will not work unless a standards-compliant cable is used.  
• Is the input signal compatible with this monitor? (See page  
25.)  
• Is the monitor connected correctly to the PC?  
• Is the PC turned on?  
• Is the PC in power-saving mode? Try pressing a key on the  
keyboard or moving the mouse.  
• Turn off the LCD monitor power, wait 5 seconds or longer,  
and then turn the power on again.  
The video does not appear properly.  
• If a powerful amount of strain is exerted on the touch  
display, a portion of the display may remain on the screen.  
In this situation, turn off the monitor power, wait 5 seconds  
or longer, and then turn the power on again.  
The touch panel does not respond.  
• Is the USB cable connected properly? (See page 10.)  
• The touch panel may not work properly if there is a large  
contact area (e.g. if the screen is touched with the palm of  
the hand).  
• Is the monitor in pen-only mode? Touch action is disabled  
in pen-only mode. (See page 14, page 18.)  
• Is the monitor in finger-only mode? You cannot touch the  
screen with the touch pen when in finger-only mode. (See  
page 14, page 18)  
• Are monitor operations locked? (See page 20.)  
• When there is no signal input to the LCD monitor, actions  
on the touch panel are not possible. Please operate the PC  
using the mouse and keyboard.  
The response of the touch screen is slow.  
Some parts of the screen do not respond.  
• When starting your computer or connecting the USB cable,  
do not touch the touch panel.  
• When starting the LCD monitor, do not touch the screen.  
If the screen is touched, the monitor may not function  
correctly. In this situation, turn off the LCD monitor power,  
wait 5 seconds or longer, and then turn the power on again.  
• While the menu screen is displayed, touch actions are not  
possible other than those for the menu screen. First exit the  
menu screen and then perform the operation.  
• There may be no response if the included touch pen and  
your hand on the screen are too close. In this situation,  
perform the operation with the pen and your hand  
separated farther apart.  
E
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Product Specifications  
n
Model  
LL-S201A  
LCD component  
Max. resolution  
Max. colors  
20" Class [19-1/2 inch (49.5cm) diagonal] TFT LCD  
(pixels) 1920 x 1080  
Approx. 16.77 million colors  
Pixel pitch  
0.225 mm (H) × 0.225 mm (V)  
Viewing angle  
Screen active area  
Plug and play  
178° right/left/up/down (contrast ratio ≥ 10)  
inch (mm) 17 x 9-9/16 (432 x 243)  
VESA DDC2B  
Color adjustment  
menu  
Image quality  
Normal/Pen Writing/Game/Multimedia/User  
Color temperature  
9000K, 7500K, 6500K, 5000K, and 4200K  
(With individual RGB adjustment and adjustment reset functions)  
Input terminals  
HDMI  
x 1 (HDMI/MHL)  
x 1  
DisplayPort  
Headphones  
Output terminals  
Speaker output  
Touch Panel  
φ3.5 mm mini stereo jack x 1  
1 W + 1 W  
Touch screen system  
Capacitive  
USB (for touch panel  
x1, microUSB Type B Ver.1.1  
communication)  
Maximum touch points  
10 points  
Power requirement  
AC 100 V - 240 V, 50/60 Hz (when using the supplied AC adapter),  
DC 19 V  
Operating temperature  
Operating humidity  
32°F to 95°F (0°C to 35°C)  
20% to 80% (no condensation)  
Power consumption  
26 W / 35 W / 0.5 W (when using the supplied AC adapter)  
(During normal operation/when MHL charging/during  
standby) *  
Dimensions (excluding protrusions)  
Weight  
inch (mm) Approx. 18-1/4 (W) x 1 (D) x 10-13/16 (H) (463.8 x 25.2 x 274.8)  
lbs. (kg) Approx. 5.07 (2.3) (excluding the stand)  
Approx. 6.39 (2.9) (including on stand)  
*
When the DisplayPort input terminal and Micro-USB terminal are connected  
As a part of our policy of continuous improvement, SHARP reserves the right to make design and specification changes for  
product improvement without prior notice. The performance specification figures indicated are nominal values of production  
units. There may be some deviations from these values in individual units.  
E
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Dimensional Drawings  
n
Note that the values shown are approximate values.  
18-1/4 [463.8]  
VESA holes *  
1-15/16 1-15/16  
[50] [50]  
1 [25.2]  
(excluding protrusions)  
Unit: inch [mm]  
18-1/4 [463.8]  
Opening width (17 [432])  
* Use a VESA-compliant mounting bracket capable of supporting 4 times the weight of the monitor.  
* When attaching a VESA-compliant mounting bracket, use M4 screws that are 3/16inch to 1/4inch (4 to 6 mm). longer than the  
thickness of the mounting bracket.  
* When mounting the monitor on a wall or ceiling, ensure that the mounting location is capable of supporting 4 times the weight  
of the monitor (e.g. a concrete wall or column).  
Standing position  
Pen writing position  
n
n
10-13/16 [275.3]  
6-9/16 [167]  
E
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Supported frequency  
n
Resolution  
Frame rate  
Remarks  
640×480  
800×600  
60Hz  
60Hz  
VGA  
SVGA  
XGA  
1024×768  
720×480p  
1280×720p  
1920×1080p  
720×576p  
60Hz  
59.94/60Hz  
50/59.94/60Hz  
50/59.94/60Hz  
50Hz  
* All are compliant only with non-interlaced.  
* Each is scaled to 16:9 and displayed using the full screen.  
* Depending on the connected PC, images may not be displayed properly even if the compatible signal described above is  
input.  
DDC (plug and play)  
n
The monitor supports the VESA DDC (Display Data Channel) standard.  
DDC is a signal standard for plug and play between monitors and computers. Information about resolution and other parameters  
is exchanged between the two. This function can be used if the computer supports DDC and it has been configured to detect  
plug-and-play monitors.  
There are several types of DDC, depending on the communication method used. This monitor supports DDC2B.  
n
HDMI input terminal pins  
DisplayPort input terminal pins  
n
(HDMITM Connector)  
(DisplayPort 20 pin)  
No.  
1
Function  
TMDS data 2+  
No.  
Function  
No.  
1
Function  
MainLane 3-  
No.  
Function  
11 TMDS clock shield  
12 TMDS clock-  
13 CEC  
11 Gnd  
2
TMDS data 2 shield  
TMDS data 2-  
2
Gnd  
12 MainLane 0+  
13 Gnd  
3
3
MainLane 3+  
MainLane 2-  
Gnd  
4
TMDS data 1+  
14 N.C.  
4
14 Gnd  
5
TMDS data 1 shield  
TMDS data 1-  
15 SCL  
5
15 Aux +  
6
16 SDA  
6
MainLane 2+  
MainLane 1-  
Gnd  
16 Gnd  
7
TMDS data 0+  
17 DDC/CEC GND  
18 +5V  
7
17 Aux -  
8
TMDS data 0 shield  
TMDS data 0-  
8
18 Hot-plug detection  
19 Gnd  
9
19 Hot-plug detection  
9
MainLane 1+  
10 TMDS clock+  
10 MainLane 0-  
20 3.3 V  
E
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
LL-S201A Mu EN13A(1)  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sony Blu ray Player BDP S1200 User Manual
Sony Camera Accessories LCSCSW L User Manual
Sony CD Player CDU924S User Manual
Sony Digital Camera 4 187 045 111 User Manual
Sony Speaker System SA VS310 User Manual
Stamina Products Bicycle 15 4550 User Manual
Stiga Snow Blower 1171 HST User Manual
Studer Innotec Battery Charger XPC 2200 24 User Manual
Swann Security Camera DVR4 Net PLUS User Manual
Sylvania CRT Television SRT2323 User Manual