SCH-R520 Series
P O R T A B L E
M O B I L E
User Manual
D U A L - B A N D
P H O N E
Please read this manual before operating your
phone, and keep it for future reference.
Download from Www.Somanuals.com. All Manuals Search And Download.
GH68-25818A
Printed in Korea.
®
®
Nuance , VSuite™, T9 Text Input, and the Nuance logo are trademarks or registered trademarks of Nuance Communications, Inc. or its
affiliates in the United States and/or other countries.
®
ACCESS and NetFront™ are trademarks or registered trademarks of ACCESS Co., Ltd. in Japan and other countries.
®
The Bluetooth word mark, figure mark (stylized “B Design”), and combination mark (Bluetooth word mark and “B Design”) are registered
trademarks and are wholly owned by the Bluetooth SIG.
microSD™ and the microSD logo are Trademarks of the SD Card Association.
Disclaimer of Warranties; Exclusion of Liability
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED ON THE WARRANTY PAGE ENCLOSED WITH THE PRODUCT, THE
PURCHASER TAKES THE PRODUCT "AS IS", AND SAMSUNG MAKES NO EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER
WITH RESPECT TO THE PRODUCT, INCLUDING BUT NOT LIMITED TO THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE; THE DESIGN, CONDITION OR QUALITY OF THE PRODUCT; THE PERFORMANCE OF THE PRODUCT; THE
WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS CONTAINED THEREIN; OR COMPLIANCE OF THE PRODUCT WITH THE
REQUIREMENTS OF ANY LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO. NOTHING CONTAINED IN THE INSTRUCTION
MANUAL SHALL BE CONSTRUED TO CREATE AN EXPRESS OR IMPLIED WARRANTY OF ANY KIND WHATSOEVER WITH RESPECT TO THE
PRODUCT. IN ADDITION, SAMSUNG SHALL NOT BE LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE PURCHASE OR USE OF
THE PRODUCT OR ARISING FROM THE BREACH OF THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL OR CONSEQUENTIAL
DAMAGES, OR LOSS OF ANTICIPATED PROFITS OR BENEFITS.
Download from Www.Somanuals.com. All Manuals Search And Download.
Table of Contents
1
Download from Www.Somanuals.com. All Manuals Search And Download.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
FCC Hearing-Aid Compatibility (HAC) Regulations
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 1: Getting Started
This section explains how to start using your Samsung r520™
phone by activating service and setting up Voicemail. This
section also explains how this manual is put together.
Text Conventions
This manual provides condensed information about how to use
the phone. To make this possible, the following terms and icon
display in place of repeatedly-used procedural steps:
Understanding this User Manual
highlight
UsetheNavigationkey(
effect onto a menu item or screen item of interest.
)tomoveahighlighting
The chapters of this manual generally follow the same order as
the menus and sub-menus on the phone. A robust index for quick
reference to most features begins on page 163.
select
After “highlighting” a menu item or screen item,
Also included is important safety information that you should
know before using the phone. Most of this information is near the
back of the guide, beginning on page 135.
press the MENU-OK key (
save a highlighted menu item or screen field of
interest.
) to launch, access, or
Notes and Tips
➔
Used in place of “select” in long “drill down”
procedure steps.
Throughout this manual some text is set apart from the rest. In
this way, important information, quick methods for activating
features, to define terms, and more are emphasized. The
definitions for these methods are as follows:
Example: “...Settings
➔
Call Settings
➔
Call Answer...”
•
•
•
Notes — Explain alternative options within the current feature, menu,
or sub-menu.
Tips — Provide quick or innovative methods for performing functions
related to the subject at hand.
Important — Points out important information about the current
feature that could affect performance, or even damage the phone.
Getting Started
4
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Place the battery cover over the battery and (1) gently
press down, then (2) slide the cover forward until it clicks
into place.
Installing the Battery
Note: The phone comes packaged with a partially charged rechargeable
standard Li-Ion battery and travel adapter.
Important!: You must fully charge the battery the first time you use the
phone, otherwise you could damage the battery.
Removing the Battery
1. Press and hold
to turn off the phone (if on).
2. Slide the cover toward the top end of the phone. Lift the
cover up and away from the phone, bottom end first.
1. Insert the top end of the battery first, matching the gold
contacts on the top of the battery to those inside of the
phone battery compartment.
2. Lightly press the bottom end of the battery down into the
phone until it slips into place.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Lift the bottom of the battery up (1) and away (2) from the
1. Plug the large end of the Travel Adapter into a standard
phone.
120 VAC or 220 VAC wall outlet.
Important!: For connection to an electrical supply not located in North
America, you must use an adaptor of the proper configuration for
the power outlet. Use of the wrong adapter could damage the
phone and void the warranty.
2. Insert the smaller end of the Travel Adapter into the
charger/accessory connector on the right side of your
phone.
Charging the Battery
Your phone is powered by a rechargeable standard Li-Ion battery.
Only use Samsung-approved charging devices and batteries.
Samsung accessories are designed to maximize battery life. Use
of other accessories may invalidate the warranty and may cause
damage.
Use the Travel Adapter
+
The travel adapter included
with this phone is a
convenient, light-weight
charger that rapidly charges
the phone from any 120/220
VAC outlet.
Incorrect
Correct
Important!: You must unplug the adapter before removing the battery from
the phone during charging to avoid damage.
Getting Started
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Turning Your Phone On
1. Open the flip on the phone, as
shown.
Warning!: If your handset has a touch screen display, please note that a
touch screen responds best to a light touch from the pad of your
finger or a non-metallic stylus. Using excessive force or a metallic
object when pressing on the touch screen may damage the
tempered glass surface and void the warranty. For more
2. Press
.
Low Battery Indicator
Note: As with any other radio-transmitting device,
do not touch the antenna while using the
phone as this can affect call quality and can
cause the phone to operate at a higher than
necessary power level.
The battery indicator (
display indicates power level. Monitor the battery strength and
ensure your battery is adequately charged.
) in the upper-right corner of the
Press
Five bars (
) indicate a full charge.
3. The phone begins searching for a
network signal.
An empty battery icon (
) indicates a near empty battery.
A blinking empty battery icon (
) and a tone sounding
4. Once the phone finds a signal, the time, date, and day
indicate you have two to three minutes before the battery is too
low to operate the phone.
display at the top of the display.
5. You’re now ready to place and receive calls.
If you continue to use the phone without charging the battery, the
phone shuts down.
Note: If you are outside of your carrier’s coverage or roaming area (
),
the No Service icon (
) displays at the top of the phone’s display. If
Activating Your Phone
Contact your Wireless Carrier and follow their instructions for
obtaining service, if necessary. We suggest that you read this
guide to fully understand the services your phone supports.
you cannot place or receive calls, try later when service is available, or
at another location.
Turning Your Phone Off
ᮣ
Press and hold
powers off.
for two or more seconds. The phone
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Memory Card (Optional)
Your phone has a Memory Card slot on its left side, across from
the keypad. You can install a microSD card to provide
Note: If the phone is on and you press
for less than one second, the
phone does not power off. This prevents the phone from accidentally
being turned off.
™
additional memory for storing files (such as, sound files and
photos) in the phone.
Setting Up Your Voicemail
Voicemail allows callers to leave voice messages, which can be
retrieved any time.
Install a Memory Card
Note: Once your Voicemail account is set up, you can use the Voicemail
folder (under the Message menu) to view details of voice messages in
the Voicemail box.
2. Insert the memory card — label side facing up and smaller
end pointing toward the phone — into the memory card
slot.
1. In Standby mode, press and hold
or dial your own
mobile number to dial Voicemail.
2. Follow the prompts in the new user tutorial to setup your
mail box.
Listen to Voicemail
ᮣ
In Standby mode, press and hold
or dial your own
mobile number to dial Voicemail. After connecting, you
hear your voice greeting. You are prompted to enter your
password.
Correct
Getting Started
8
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press the memory card into the slot until the card locks
into place.
4. Replace the microSD cover.
Remove a Memory Card
2. Press the memory card into the slot until the card lock
releases.
3. Remove the memory card from the memory card slot.
5. Replace the microSD cover.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 2: Understanding Your Phone
This section outlines some key features of your phone. It also
describes the screen format and the icons that display when the
phone is in use.
Open View (Front) of Your Phone
Features of Your Phone
•
Domestic and international voice and text messaging service (available
on participating networks).
•
•
•
•
•
•
•
•
High speed data (CDMA 2000 EVDO Technology)
®
Bluetooth Wireless Technology (see Note)
Global Positioning System (GPS) Technology
Digital Assistant Tools
Picture/Video (MMS) and Text (SMS) Messaging
Built-in 1.3 Megapixel Digital Camera
Voice Dial
Music Player (MP3 — requires music files in Music Memory or on an
optional Memory Card)
•
•
3.5 mm Headset Jack
0
Memory Card Slot (microSD™ — up to 8 Gb)
Note: The r520 phone supports the wireless headset, hands-free, dial-up
networking, A2DP, Phonebook Access, serial port, file transfer profiles
for Bluetooth® wireless technology. The r520 does not support all
Bluetooth OBEX profiles.
Understanding Your Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Features
5. Music Player Key — In Standby mode, launches your
phone’s Music Player, provided you have installed an
optional microSD Memory Card.
1. Earpiece — Lets you hear ringing and alert tones, alarm
tones, and the other parties to calls.
6. Send Key — Lets you place or receive a call. In Standby
2. Display — In Standby mode, indicates the status of your
phone, including numbers dialed, feature and function
screens, status icons, message indicators and signal
strength.
mode, press the key once to access the recent calls log.
7. Voicemail Key — Lets you speed dial your Voicemail
account to review your voice messages.
In Music Player mode, lists available music selections,
indicates music playback progress, shows music playback
8. Voice Recognition Key — In Standby mode, press and hold
to launch Voice Recognition.
9. Microphone — Lets the other caller hear you clearly when
you are speaking to them.
In Camera/Camcorder mode, shows Camera/Camcorder
viewfinder screen without icons. (For more information,
10. Special Function Keys — Enter special characters. Perform
various functions.
11. Alpha-numeric Keys — Use these keys to enter numbers,
3. Navigation Key — In Menu mode, lets you scroll through
the phone menu options. In Standby mode, lets you access
preset functions and one user-defined function.
letters, and symbols.
12. End Key — Ends a call. If you press and hold the END key,
the phone powers On or Off. When you receive an
incoming call, press to send the call to voicemail.
4. Left Soft Key — Used to navigate through menus and
applications and to select the choice indicated at the
bottom left corner of the Main LCD.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
13. Camera Key — In Standby mode, lights the front display
backlight and launches the Camera feature of your phone.
In Camera mode, takes pictures.
Side Views of Your Phone
14. Clear Key — In text entry mode, deletes characters from
the display. In menu mode, returns you to the previous
menu or screen.
15. Right Soft Key — Used to navigate through menus and
applications and to select the choice indicated at the
bottom right corner of the Main Display.
16. OK Key — In Standby mode, launches the Main Menu.
When navigating through a menu, accepts the highlighted
choice in a menu.
Features
1. Volume Key — In Standby mode, lets you adjust the
incoming call ringer volume. When receiving a call, lets
you temporarily mute the ringer. In Music Player mode, lets
you browse available music selections or adjust music
playback volume.
2. Unlock Key — Unlocks the outer keypad and outer feature
keys.
Understanding Your Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
12
3. microSD (Memory Card) Slot — Lets you install and remove
an optional microSD Memory Card for additional image,
photo, and music storage.
Rear View (Open) of Your Phone
4. Power-Data Connector — Used to connect charging
accessories or optional USB Data cables to your phone.
5. Speakerphone Key — In Standby mode or during a call,
enables/disables Speakerphone mode.
6. Headset Connector — Used to connect an optional headset
(for hands free operation and/or music playback) or an
optional TTY device.
Features
1. Camera Lens — The lens of your built-in Camera-
Camcorder.
2. Mirror — Helps you center the Camera Lens for self
portraits.
3. Speaker — Reproduces sounds from the phone (when in
Speakerphone mode) and from the Music Player.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
In camera mode, press
message.
to take a photo or to create a Picture
Command Keys
Functions for the soft keys are indicated by labels that display on
the screen above each soft key. There are two soft keys, Left
When the OK key function is Edit, press the Edit key (
Draft message.
) to edit a
(
) and Right (
).
Speakerphone Key
Left Soft Key
In Standby mode or during a call, pressing and holding the
Speakerphone key ( ) places your phone in Speakerphone
mode, allowing you to use your phone hands-free and/or to
include other nearby persons in a call. (For more information,
Some functions of the Left soft key (
) are as follows:
•
In Standby mode, press the Msgs soft key ( ) to open the Messages
menu.
•
When the Left soft key function is Edit, press the Edit soft key ( ) to
edit a Contacts entry.
In Speakerphone mode, pressing and holding the Speakerphone
Right Soft Key
key (
) disables Speakerphone mode.
Some functions of the Right soft key (
) are as follows:
Send Key
•
•
•
In Standby mode, press the Contacts soft key ( ) to launch the
Contacts Find screen.
When the Right soft key function is Options, press the Options soft key
Press the Send key (
) to answer calls, dial calls, and to
recall the last number(s) dialed, received, or missed.
•
•
•
Press
Enter a number and briefly press
Briefly press in Standby mode to display a list of recent calls to
and from your phone.
once to answer calls.
(
) and a pop-up menu displays.
to make a call.
When the Right soft key function is Back, press the Back soft key (
)
to back up one menu level.
OK Key
•
•
Press
Press
twice in Standby mode to call the most recent number.
to pick up a waiting call. Press again to switch back
•
In Standby mode, press the OK key (
) to launch the Main Menu.
•
In a menu, press to accept the highlighted selection.
to the other call.
Understanding Your Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Music Player Key
Camera Key
In Standby mode, pressing the Music Player key ( ) launches
the Music Player, provided an optional microSD Memory Card
In Standby mode, press the Camera key (
camera built into your phone.
) to activate the
) switches from
In Camera mode, pressing the Camera key (
Camera mode to Camcorder mode.
Clear Key
Understanding the
1
Display
The Clear key ( ) erases or clear numbers, text, or symbols
from the display. You can also use the key to return to a previous
menu or to return to Standby mode from any menu.
2
Display Layout
1. The top line of your
•
If you enter an incorrect character, briefly press
delete) the character.
to backspace (and
phone’s display
3
contains icons that
•
•
To erase the entire sentence, press and hold
.
indicate network status,
To back up one menu level, briefly press
.
battery power, signal
4
End Key
5
strength, and more. (For
•
•
•
Press and hold the End key
Briefly press once to disconnect a call.
to return to Standby mode from any menu, or to cancel the
to turn your phone on or off.
Press
last input.
2. In Standby mode, the second and third lines of the display
Navigation Key
show the current date and time.
Use the directional keys on the Navigation key (
) to
3. The center portion of the display shows information such
browse menus, sub-menus, and lists. Each directional key also
acts as a shortcut to launch applications. (For more information,
as call progress information, messages, and photos.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
4. The second line from the bottom of the Standby screen
•
•
•
•
•
•
Reconfirm
Example: “Erase All Messages?”
Performing
Example: “Sending...” “Connecting...”
Completed
Example: “Message Saved”
Information
Example: “New Message”
Error
–
–
5. The bottom line of the display shows current soft key
functions. The sample screen shows that pressing the Left
–
(
Msgs) soft key displays the Messages menu, pressing
Menu ) displays the Main Menu, and pressing the
Right (Contacts) soft key displays the Contacts Find screen.
–
(
–
Example: “System Error!”
Display Icons
Warning
–
Example: “Low Battery,” “Memory Full!”
Your r520 phone can show you definitions of the icons that can
appear on the top two lines of the display.
Backlights
To access the Icon Glossary:
Backlights illuminate the display and the keypad. When you press
any key or open the phone, the backlights come on. They go off
when no keys are pressed within a period of time set in the
Backlight menu.
ᮣ
In Standby mode, press Menu
Phone Info Icon Glossary. A list appears showing the
icons that can appear on the top two lines of the display.
(
), then select Settings
➔
➔
Dialogue Boxes
Note: During a phone call, the display backlight dims and turns off after
10 seconds to conserve battery power, regardless of the Backlight
Dialogue boxes prompt for action, inform you of status changes,
or warn of situations such as low battery. Dialogue boxes and
their definitions are outlined below.
•
Choice
Example: “Save Message?”
–
Understanding Your Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Adjust the Ringer
Your Phone’s Modes
Standby Mode
In Standby mode, press the Volume key (on the left side of the
phone) up or down.
Standby mode is the state of the phone once it has found service
and is idle. The phone goes into Standby mode:
1. In Standby mode, press the Volume key up or down to set
the call ringer volume as desired. Options are:
•
•
After you power the phone on.
When you press after a call or from within a menu.
• Silence All
• Vibrate
• Low
• Medium
• Medium/High
• High
In Standby mode, the time, day, and date as well as all phone
status icons display.
• Low/Medium
Place Calls in Standby Mode
2. To enable vibration, press the Vib. on soft key.
1. While in Standby mode, enter a phone number, and press
to place a call.
3. When you are satisfied with the setting, press SET. The
phone returns to Standby mode.
2. Press
to return to Standby mode.
Tip: You can also enter the Master Volume sub-menu by pressing Menu
➔
Receive Messages in Standby Mode
Sounds
➔
Master Volume. Use the Volume key on the left side of your
phone to adjust the ringer volume setting.
You can receive messages in Standby mode. An alert tone
sounds and a notification message appears in the display when a
new message arrives.
Note: The Vibrate icon ( ) appears in the display when the phone is in
Vibrate mode. The Vibrate/Ring icon (
the phone is in Ring with Vibrate mode.
) appears in the display when
The following call message options display:
•
•
View Now — This selection allows you to view the messages now.
View Later — This selection allows you to view the messages at a
later date.
Highlight the desired viewing option and then press
.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Answer Mode
Vibrate Mode
You can choose to answer a call by pressing any key except
In Standby mode, repeatedly press the Volume key (
)
or
, by pressing only
, or by opening the phone’s slide.
down until “Vibrate” appears in the display.
The Volume key is on the left side of phone.
Talk Mode
Speakerphone Mode
You can place and receive calls only when your phone is on.
While in a call, your phone is in talk mode. Press the Options soft
key to display a list of menu options. (For more information, refer
Speakerphone mode lets you use your phone hands-free and/or
share calls with others.
•
Entering Speakerphone Mode — In Standby mode, press and hold
the Speakerphone key ( ).
Exiting Speakerphone Mode — In Speakerphone mode, press and
hold the Speakerphone key ( ).
Hands-free Mode
Enter/Exit Silent Mode
•
Silences the tones your keypad makes when you press a key.
To enter Silent Mode:
ᮣ
In Standby mode, press and hold
. “Vibrate Mode
Hands-free mode lets you operate your phone remotely, without
touching it other than to turn it on or off.
Activated” briefly appears in the display and your phone
To place your phone in Hands-free mode, do one of the following:
returns to Standby mode.
•
Connect an optional wired headset.
– or –
To exit Silent Mode:
ᮣ
While in Silent mode and Standby mode, press and hold
•
Pair and connect an optional Bluetooth technology headset or hands-
. “Normal Mode Activated” briefly appears in the
display and your phone returns to Standby mode.
Understanding Your Phone
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Camera Mode
Input mode
Camera mode lets you take pictures with your phone’s camera.
In Camera mode, you can also adjust the resolution and
appearance of your pictures.
Input mode determines how you enter text, numbers, and
symbols. While at any text entry screen, press the Left soft key,
then choose the input mode from the pop-up menu using the
Navigation key. Optional input modes are T9 word
,
T9 Word, T9
,
,
,
,
,
•
Entering Camera Mode — In Standby mode, press the Camera key
).
Exiting Camera Mode — Press
(
•
.
Tip: You can cycle between T9 word T9 Word, and T9 WORD, or between abc,
,
Abc, and ABC, by repeatedly pressing
until the capitalization label
changes to the desired value.
Note: You can also enter Camera mode by pressing Menu
(
) and
selecting Multimedia
➔
Camera.
You can cycle between T9 Word
,
Abc, and 123 by repeatedly pressing
and holding
value.
until the input mode label changes to the desired
Camcorder Mode
Camcorder mode lets you record videos with your phone’s
camera. In Camcorder mode, you can also adjust the quality and
appearance of your videos.
Lock Mode
When the phone is in Lock Mode, restrictions are placed on
phone use. You can receive calls and messages, but cannot place
outgoing calls (except for emergency numbers) until you unlock
the phone. Lock Mode also restricts access to menus and the
Volume key. Unlock your phone by entering the lock code when
•
Entering Camcorder Mode — In Camera mode, press the Camera
key ( ).
Exiting Camera Mode — Press
•
.
Note: You can also enter Camcorder mode by pressing Menu
selecting Multimedia Camcorder
(
) and
➔
.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 3: Call Functions
This section explains how to make and answer calls. This section
also includes the features and functionality associated with
making or answering calls.
Important!: Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your
wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all
wireless networks at all times.
Making a Call — Number Entry Dialing
1. With the phone on, enter the number to call using the
keypad.
Important!: DO NOT depend on this phone as a primary method of calling
911 or for any other essential or emergency communication.
2. Press
to place the call.
Dialing International Numbers
Call Another Country — Manual Method
1. In Standby mode, enter 011 (the
three-digit exit code for the United
States).
Dialing Emergency Numbers
To place an emergency call:
1. With the phone on, enter 911 using the keypad.
2. Press
to place the call.
Use the Emergency # settings to specify other numbers as
2. Enter the country code to dial.
3. Enter the number to call, then
press
.
Important!: Emergency number 911 is preset into your phone. You can dial
this number almost any time, even when the phone is locked or
restricted.
Note: Puerto Rico and Canada are on the North American dialing plan.
Making calls to Puerto Rico and Canada is similar to making calls
within the United States, no unique country codes are necessary.
If you call 911 an audible tone is heard and an Emergency
prompt appears in the display for the duration of the call.
Call Functions
20
Download from Www.Somanuals.com. All Manuals Search And Download.
CallAnotherCountry—ShortcutMethod
Note: When you press
, your phone automatically replaces the second
+
1. In Standby mode, press and hold
with the two-digit country code you selected as the International
Dialing shortcut.
until a plus sign (+) appears in
the display.
3. Enter the number to call, then press
.
Manual Pause Calling
Note: When you press
, your phone
automatically replaces this
+
with 011, the
When you call automated systems (like banking services), you
are often required to enter a password or account number.
Instead of manually entering the numbers each time, you can
store the numbers in your Contacts along with special characters
called pauses.
three-digit exit code for the United States.
2. Enter the country code for the
country to call, or press and hold
until a second plus sign (
+)
To manually call a number with pause(s) without storing the
number to Contacts:
appears in the display.
1. Enter the number you wish to call.
2. Press the Options soft key. A pop-up menu containing the
following options appears in the display:
Tip: If you place most or all of your international
calls to numbers in the same country, set-up
the International Dialing shortcut to
•
2-Sec Pause — P pause — A two-second pause stops the
calling sequence for two seconds and then automatically sends the
remaining digits.
automatically dial that country’s code. (For
•
Wait — W pause — A hard pause stops the calling sequence until
you press
.
3. Highlight the desired pause option.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Press
sequence.
to enter the highlighted pause into your number
You can assign and change location (speed dial) numbers for
your contacts.
One-Touch Dialing
Note: If you select 2-Sec Pause
,
P
appears in the display. If you select Wait
,
W
Speed Dial numbers 2 through 9 are special One-Touch dialing
numbers. You can call the phone numbers stored in your phone’s
Contacts list and assigned Speed Dial numbers 2 through 9 by
pressing and holding a single key.
appears in the display.
5. Press
to call the number.
Making a Call — Contact Dialing
Example: For Speed Dial number 3, press and hold the
key until the
You can store phone numbers and contact names in your phone’s
Contacts list. To call a Contact, do the following:
name and number display on the screen and the number dials.
1. Press the Contacts soft key. The Contacts Find screen
Two-Touch Dialing
appears in the display.
Memory locations 10 through 99 are special Two-Touch dialing
locations.
The Contacts list displays the first few entries with names
matching the entered letters.
Example: For location number 13, briefly press
, then press and hold
until the name and number display on the screen and the number
dials.
3. Highlight the Contact to call and press
Three-Touch Dialing
Memory locations 100 through 999 are special Three-Touch
dialing locations.
Making a Call — Speed Dialing
Speed Dialing lets you quickly and easily dial any contact in your
Contacts list by using that contact’s location number in the list.
Example: For location number 113, briefly press
again, then press and hold until the name and number display
on the screen and the number dials.
, briefly press
Call Functions
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Pause Dialing From a Contacts Entry
2. Press the Up navigation key.
The Contacts list screen
displays showing the desired
Contact name.
•
If you speed dial a contact that contains (two-second) P pause(s)
simply wait for the pauses to pass and the dialing to complete.
•
If you speed dial a contact that contains (hard) W pause(s), wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and enter the appropriate
response(s).
3. If needed, use the Up and
Down navigation keys to
highlight the Contact to call.
Making a Call — Quick Search Dialing
Use the Quick Search feature to dial
any number stored in your Contacts
list by pressing the number keys that
correspond to the first few letters of
a Contact name. (For more
4. Press
to call the
highlighted Contact. (For more information, refer to
Making a Call — Voice Dialing
Your r520 mobile phone includes state-of-the-art voice
recognition software that lets you dial numbers using your voice.
Quick Search Dialing a Contact
Using Voice Dial
To find and dial a Contact, do the
following:
Use the Voice Dial command to dial any number stored in your
Contacts list by saying the name of the contact (Name Dialing).
You can also use Voice Dial to dial any valid telephone number,
even numbers not stored in your Contacts list, by speaking the
individual digits in the number (Digit Dialing).
1. In Standby mode, press the number keys that correspond
to the first few letters of the Contact name, as shown.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Voice Dialing Tips:
4. Say “Yes” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from
•
•
Wait for the beep before speaking.
Speak clearly at a normal volume, as if you were talking to someone
on the phone.
•
When saying a name, say the first name then the last name.
•
•
Press the Repeat soft key to say the name again.
Dialing a Name
Press the Settings soft key, then press the Exit soft key to exit
Voice Dial without dialing.
To dial a name, do the following:
1. In Standby mode, press and hold
.
If the recognized name has multiple numbers stored for it
(that is, Home, Work, Mobile, and so on), Voice Dial
displays the possible choices and prompts you with “Which
“Say a Command” appears in the display and is
pronounced through the earpiece.
number?
”
2. Say, “Call”.
5. Say one of the following number types:
You are prompted to “Say the name or #”.
•
•
•
“
Home
Work
Mobile
”
3. Speak clearly and say the name of a person in the Contacts
“
”
list, first name followed by last name.
“
”
If the name is recognized, Voice Dial repeats the name and
dials the number.
Voice Dial dials the specified number.
Dialing a Number
If Voice Dial is not sure which name you said, it displays a
choice list of up to three names and prompts you with “Did
you say?” followed by the first name on the list.
To dial a number using Voice Dial, do the following:
Call Functions
24
Download from Www.Somanuals.com. All Manuals Search And Download.
1. In Standby mode, press and hold
Say a Command” appears in the display and is
pronounced through the speaker.
2. Say “Call”.
.
Pause Dialing From a Contacts Entry
•
If you voice dial a contact that contains (two-second) P pause(s) simply
“
wait for the pauses to pass and the dialing to complete.
•
If you voice dial a contact that contains (hard) W pause(s), wait for the
appropriate prompt(s) from the number you are calling (credit card
number, bank account number, and so on) and enter the appropriate
response(s).
VoiceSignal prompts you to “Say the name or #”.
3. Speak clearly and say the telephone number of the person
Answering a Call
Your phone notifies you of a call in the following ways:
you want to call. For example, say “7 8 1 5 5 5 6 2 0 0."
If it recognizes the number, Voice Dial repeats and dials the
number. If Voice Dial is not sure it has recognized the
number, it displays a choice list of up to three numbers and
prompts you with “Did you say?” followed by the first
number on the list.
•
A ring tone sounds and/or your phone vibrates (Your phone provides
seven ring volume settings including: Silence All Vibrate Low
Low/Medium Medium Medium/High, or High, and/or different
ring types to distinguish callers. You can add vibration to any ring
volume setting.)
,
,
,
,
,
•
A phone number (unless blocked by the caller) and a name display on
the screen (If the caller’s number and name are stored in your Contacts
list).
4. Say “Yes” to confirm the number or “No” to hear the next
one, or use the keypad to select the correct number from
•
•
If the caller can’t be identified, Call from unavailable#, Call from
restricted number, or no number appears in the display.
Your phone continues to notify you of the call until one of the following
events occurs:
•
•
To say the name again, press the Repeat soft key.
To exit Voice Dial without dialing, press
.
–
–
–
You answer the call.
You ignore the call.
You mute the ringer.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
–
–
The calling party ends the call.
The call is sent to voicemail.
1. While in a call, press the Options soft key.
The following menu items appear in the display:
Answering an Incoming Call
ᮣ
Slide your phone open, if closed, or press
. The ring
tone and/or vibration stop and the caller’s voice can be
heard in the earpiece.
• Contacts — The Contacts Find screen appears in the display.
• Recent Calls — The recent calls list appears in the display.
• Connect Bluetooth — Connects to a Bluetooth headset or
handsfree device in your Registered List. (For more information,
Tip: You can set your phone to automatically answer calls or to answer calls
• Send DTMF — Sends your phone number as DTMF tones.
• Voice Privacy — Select Standard or Enhanced voice privacy.
Note: If you set the Auto Answer option to any value other than Off, the Auto
Answer icon ( ) displays.
Adjusting the Call Volume
Do one of the following:
•
•
Select the desired sub-menu or feature.
Exit the menu by pressing
During a call, press the Volume key (
the you hear the other party to the call at the desired loudness.
The Volume key is on the left side of phone.
) Up or Down until
.
Tip: You can block/restore sound going to the other parties on this call by
The In-Use Options Menu
pressing the Mute Unmute soft key. This can reduce noise on
/
conference calls.
You can access numerous menus and features while in a call.
You can enable/disable Speakerphone mode by pressing and holding
. Speakerphone mode enables you to conduct a call hands-free
and to share a call with other people nearby. (For more information, refer
Note: If the call is disconnected while you are accessing the In-Use Option,
the In-Use Option disappears from the display and the phone
eventually returns to Standby mode.
Call Functions
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Ignoring a Call
• Data Calls
• Call Timer
When you ignore an incoming call, the call is immediately
forwarded to your voice mail.
• Data Counter
2. Select the Calls log that you wish to review or the function
you wish to access.
ᮣ
During an incoming call, press the Ignore soft key. The
caller is forwarded to your voice mail.
Muting the Ringer
Note: In cases where there is a Contacts match for a Calls log entry, the
name associated with the number appears in the display instead of the
number.
To mute the Incoming Call ringer, press the Volume key Up or
Down.
Outgoing Calls
Note: Muting the ringer does not forward an incoming call to your voice mail.
Your phone retains information about the last 90 outgoing calls
and stores them in the Outgoing calls log. You can review the
Outgoing calls log for the time and date of a call, as well as other
information.
Calls Log
The Calls log retains information about Outgoing, Incoming, and
Missed calls. You can also view times for your last call and the
time totals for all calls.
Note: To quickly view your most recent calls, briefly press
in Standby
mode. Up to 270 of your most recent outgoing, incoming, and missed
calls are listed on the screen.
Review the Calls Log
1. In Standby mode, press Menu ( ), then select Calls. The
following Calls logs and options appear in the display:
1. At the Calls menu, select Outgoing Calls. A list of your
outgoing calls appears in the display.
• Outgoing Calls
• Incoming Calls
• Missed Calls
• All Calls
27
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Highlight a call, then press OPEN
(
) to view the Name of
the called party (if in the Contacts list), the number dialed,
the time and date the call was placed, and the duration of
the call (in minutes and seconds).
5. Select the desired message type to compose a message.
Incoming Calls
3. Press the Options soft key. A pop-up menu containing the
Your phone retains information about the last 90 Incoming calls
and stores them in the Incoming call log. You can review the
Incoming call log for the time and date of the call, as well as
other information.
following options appears in the display:
•
•
Save — Save the number to your Contacts.
Details — Calls to Contacts Only — Shows the entry for the called
Contact.
1. At the Calls menu, select Incoming Calls. A list of your
Incoming calls appears in the display.
•
•
•
•
Erase — Erase the selected call from your Outgoing call log.
Lock/Unlock — Protect the selected call from being erased.
Erase All — Erase all calls from your Outgoing call log.
2. Highlight a call, then press OPEN
(
) to view the Name of
the caller (if in the Contacts list), the originating number,
the time and date the call was received, and the duration
of the call (in minutes and seconds).
View Timer — Shows the number of calls and/or the total time
spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming
Calls, All Calls, Last Reset, and Lifetime Calls.
3. Press the Options soft key. A pop-up menu containing the
4. Press the Msgs soft key to launch the Send Message
following options appears in the display:
menu. The following options appear in the display:
•
•
Save — Save the number to your Contacts.
•
•
•
Text Message — Lets you send a Text message to the selected
number called.
Details — Calls from Contacts Only — Shows the entry for the
calling Contact.
Picture Message — Lets you send a Picture message to the
selected number called.
•
•
Erase — Erase the selected call from your Incoming calls log.
Video Message — Lets you send a Video message to the
selected number called.
Lock/Unlock — Protect the selected call from being erased.
Call Functions
28
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Erase All — Erase all calls from your Incoming calls log.
2. Highlight a call, then press OPEN
(
) to view the Name of
View Timer — Shows the number of calls and/or the total time
spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming
Calls, All Calls, Last Reset, and Lifetime Calls.
the caller (if in the Contacts list), the originating number,
and the time and date the call was received.
3. Press the Options soft key. A pop-up menu containing the
4. Press the Msgs soft key. The following options appear in
following options appears in the display:
the display:
•
•
Save — Save the number to your Contacts.
•
•
•
Text Message — Lets you send a Text message to the selected
number called.
Details — Calls from Contacts Only — Shows the entry for the
calling Contact.
Picture Message — Lets you send a Picture message to the
selected number called.
•
•
•
•
Erase — Erase the selected call from your Missed call log.
Lock/Unlock — Protect the selected call from being erased.
Erase All — Erase all calls from your Missed call log.
Video Message — Lets you send a Video message to the
selected number called.
View Timer — Shows the number of calls and/or the total time
spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming
Calls, All Calls, Last Reset, and Lifetime Calls.
5. Select an option to perform its function.
4. Press the Msgs soft key. The following options appear in
Missed Calls
the display:
Your phone retains information about the last 90 missed calls
(calls that were never picked up) and stores them in the Missed
call log. You can review the Missed call log for the time and date
of the call, as well as other information.
•
•
•
Text Message — Lets you send a Text message to the selected
number called.
Picture Message — Lets you send a Picture message to the
selected number called.
1. At the Calls menu, select Missed Calls. A list of your
Video Message — Lets you send a Video message to the
selected number called.
missed calls appears in the display.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Press the Msgs soft key. The following options appear in
the display:
5. Select an option to perform its function.
•
•
•
Text Message — Lets you send a Text message to the selected
number called.
All Calls
Picture Message — Lets you send a Picture message to the
selected number called.
You can review all of the calls log entries (outgoing, incoming,
and missed calls) for the time and date of a call, as well as other
information.
Video Message — Lets you send a Video message to the
selected number called.
1. At the Calls menu, select All Calls. A list of all logged calls
appears in the display.
5. Select an option to perform its function.
2. Highlight a call, then press OPEN
(
) to view further
information about the call.
Data Call
3. Press the Options soft key. A pop-up menu containing the
Your phone retains information about the last 10 data calls and
stores them in the Data call log. You can review the Data call log
for the time and date of the call, as well as other information.
following options appears in the display:
•
•
Save — Save the number to your Contacts.
1. At the Calls menu, select Data Call. A list of your data calls
Details — Calls from Contacts Only — Shows the entry for the
calling/called Contact.
appears in the display.
•
•
•
•
Erase — Erase the selected call from your Calls log.
Lock/Unlock — Protect the selected call from being erased.
Erase All — Erase all calls from your Calls log.
2. Highlight a data call, then press OPEN
(
) to view further
information about the call.
3. Press the Options soft key.
View Timer — Shows the number of calls and/or the total time
spent on the Last Call, Outgoing Calls, Incoming Calls, Roaming
Calls, All Calls, Last Reset, and Lifetime Calls
Call Functions
30
Download from Www.Somanuals.com. All Manuals Search And Download.
A pop-up menu containing the following options appears in
the display:
•
•
Roaming Calls — View the total calls duration on your phone
while roaming since the last erasure.
All Calls — View the duration of the total call, incoming, outgoing,
and data calls made on your phone since the last erasure.
•
•
•
•
Erase — Erase the selected call from your Data call log.
Lock Unlock — Blocks / permits erasure of this Call entry.
/
•
•
Last Reset — View the time and date all timers were last reset.
Erase All — Erase all calls from your Data call log.
Lifetime Calls — View the duration of all calls since your phone
was activated.
Data Counter — Shows the amount of data Transmitted and
Received during this call, the Total amount of data exchanged since
the counters were last reset, and the total amount of data
exchanged since the phone was activated.
2. To reset a selected counter (except Last Reset and Lifetime
Calls), highlight the desired counter and press the Reset
soft key.
4. Select an option to perform its function.
3. To reset all counters except Lifetime Calls, press the Reset
Call Timer
All soft key.
View the duration of your last call, total calls, and calls made
during the life cycle of you phone using the Call Timer feature.
4. To exit the Call Timer list, press
or
.
Note: Call Timer is not for billing purposes.
Note: Although most call timers can be erased, the Lifetime call timer can
never be erased.
1. At the Calls menu, select Call Timer. The following timers
Data Counter
appear in the display:
View the amount of Transmit data, Receive data, and Total data
transmitted or received since the last time you reset the data
counters, and the Lifetime amount of data transmitted or
received.
•
•
Last Call — View the duration of your last call.
Outgoing Calls — View the duration of the total outgoing calls
made on your phone since the last erasure.
•
Incoming Calls — View the duration of the total incoming calls
received on your phone since the last erasure.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Roaming
What is Roaming?
Note: Data Counter is not for billing purposes.
1. At the Calls menu, select Data Counter.
The following options appear in the display:
Roaming lets you use your r520 phone when you travel outside of
your Wireless Provider’s coverage area. The Roaming icon
(
) appears in the top line of the display when Roaming is
•
•
•
Transmit — View the total amount of data transmitted by your
phone since the last reset.
active, and extra charges may apply when making or receiving
calls.
Received — View the total amount of data received by your phone
since the last reset.
Note: Some features may be unavailable while roaming. Roaming also
consumes additional power from the battery requiring more frequent
recharging. Contact your Wireless Provider for more information about
Roaming.
Total — View the total amount of data sent or received by your
phone since the last reset.
•
•
Last Reset — View the time and date all timers were last reset.
Lifetime Data Counter — View the total amount of data sent or
received by your phone since activation (Lifetime Data Counter
cannot be reset).
How Roaming Works
Roam Option lets you set roaming preferences if you move in and
out of your home network. The following roaming options are
available:
2. To reset a selected counter (except Last Reset and Lifetime
Data Counter), highlight the desired counter and press the
Reset soft key.
•
Home only — Your phone is available for normal operation only in the
designated coverage area.
3. To reset all counters except Lifetime Data Counter, press
•
Automatic — Your Wireless Provider’s Preferred Roaming List (PRL) of
networks is used to acquire service. If no preferred networks are
found, any digital system is acquired.
the Reset All soft key.
4. To exit the Call Timer list, press
or
.
Note: Although most data counters can be erased, the Lifetime Data Counter
can never be erased.
Call Functions
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 4: Menu Navigation
This section explains the menu navigation for your phone. It also
includes an outline of all the available menus associated with
your phone.
Return to the Previous Menu
•
Press the Back soft key to return to a previous menu.
When Back does not appear in the display, press
previous menu.
•
to return to the
Menu Navigation
Navigation Key Shortcuts
In Standby mode, press a navigation key to launch the key’s
corresponding application.
Access the menus and sub menus in your phone using the
Navigation key (
) and soft keys (
), or use a shortcut.
1. In Standby mode, press Menu
(
). The first of several
menus appears in the display.
Create Txt Msg
Tip: You can launch any of the Main Menus by using a voice command — In
Standby mode, press and hold until the phone prompts, “Say a
command.” Say “Go to” followed by a Main Menu name into the
microphone. For example, Say “Go to Tools to access the Tools menu.
”
Recent Calls
Inbox
2. Use the Navigation key to browse through the menus.
Calendar
3. To enter the menu or sub menu that appears in the display,
press
.
The Shortcut Keys settings can be customized. Press Menu
then select Settings Phone Settings Shortcut Key Up Key
(
),
/
4. Press the Back soft key to return to the previous menu.
➔
➔
➔
/
/
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Navigate Using Menu Numbers
You can also access menus and sub menus using menu
numbers. After pressing Menu ( ), press the number beside
the menu to go directly to the menu or sub menu of your choice.
1. In Standby mode, press Menu ( ).
2. Press the number of the menu, sub menu, and so on for
the feature that you wish to access.
Menu Navigation
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 5: Entering Text
This section outlines how use your phone’s keypad and text entry
modes to enter letters, numbers, and symbols and punctuation.
This section also describes how to use the T9 predictive text
entry system to reduce the number of key strokes needed to
enter text.
•
Symbols — Using the phone keypad, enter a symbol into your
message by pressing the number above the symbol in the Symbols
pop-up window.
Changing the Text Entry Mode
The current text entry mode (T9 Word Abc 123, Symbols, or
Emoticons) is usually indicated as the label for the Left soft key.
,
,
Available Text Entry Modes
Text messages can be made up of letters, numbers, and
symbols. You can use the following text entry modes to simplify
text entry:
To change the text entry mode while composing a text message:
ᮣ
Repeatedly press and hold
123, and T9Word modes.
to toggle between Abc,
•
T9 Word — Press each phone key only once to enter each letter of a
Or, do the following:
word that you’re spelling. T9 WORD mode letter options are:
–
–
–
T9 word — Enter all lower case letters
T9 Word — Enter initial capital letters
T9 WORD — Enter all upper case letters
1. Press the Left soft key.
2. Select one of the following text entry modes:
•
•
•
T9word
T9Word
T9WORD
•
•
•
abc
Abc
ABC
•
•
•
123
Symbols
Emoticons
•
Abc — Enter letters by repeatedly pressing each phone key until the
desired character (as shown on the key) appears in the display. ABC
mode letter options are:
–
–
–
abc — Enter all lower case letters
Abc — Enter initial capital letters
ABC — Enter all upper case letters
•
123 — Enter numbers by pressing the corresponding keys on the
phone keypad.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Changing Capitalization
As you press each key, the
displayed letters change, and a list
of available alternative words or
letter sequences appears in the
lower half of the screen.
You can toggle the T9 Word and Abc mode capitalization between
entering all capital letters (T9WORD
/
ABC), entering all lower-case
letters (T9word
/
abc), and entering initial capital letters (T9Word
/
Abc).
ᮣ
To toggle text entry capitalization, repeatedly press
When you complete the key
until the preferred capitalization shows as the Left soft key
sequence, T9 Word recognizes that
the most commonly used word for the key sequence you
just pressed is “Samsung.”
label.
®
Using T9 Mode
T9 Word recognizes commonly used words for a particular
sequence of key presses and inserts the word into your message.
T9 Word is much faster than the traditional method of text entry
(Abc) and requires only one key press per letter of the word that
you’re spelling.
Selecting Alternative Words
If more than one word shares the same
key sequence, T9 Word displays the most
commonly used word in the text you are
entering.
1. While composing a text message, press the Left soft key,
T9 Word lists any available, alternative
words or letter sequences in the lower
half of the text entry screen.
then select T9word
2. For practice, select T9Word, then enter the word
Samsung” by pressing each of the following keys only
once:
,
T9Word, or T9WORD.
“
ᮣ
To replace the currently displayed
text with an alternative, highlight the preferred alternative
and press
.
S
A
M
S
U
N
G
Entering Text
36
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Enter characters while in Abc mode by pressing a key
repeatedly until the desired character appears in the
display.
Note: To enter a space, press the
key. To enter a period, press the
Adding Words to T9 Word
The T9 Word dictionary may not contain
an obscure word, such as the latest
technical jargon or slang. If you find you
cannot enter a particular word in T9 Word
mode, you can add the word to the T9
Word dictionary.
Example: Press
once for “G” and twice for “H”.
3. Pause briefly and the displayed character is accepted and
inserted into your message or memo.
4. To enter a space, press
. To enter a period, press
.
1. While composing message text or a
Note: To enter a space, press the
key. To enter a period, press the
text memo, press the Left soft key, then select Add T9
Word. The Add T9 Word screen appears in the display.
Entering Numbers
Enter numbers into a text message while in 123 mode.
Note: The Add T9 Word screen is locked into Abc text entry mode.
1. While composing a text message or memo, press the Left
soft key, then select 123
2. Enter your new word using Abc text entry key sequences.
.
2. Enter numbers while in 123 mode by pressing the key
labeled with the corresponding number that you wish to
insert into your message or memo.
3. Press
you are returned to the message/memo text entry screen.
Using Abc Mode
1. While composing a text message or memo, press the Left
soft key, then select abc Abc or ABC
. “T9 Word is Added” appears in the display and
,
.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Use the Prev and Next soft keys to page through the other
Entering Symbols
emoticons, if desired.
In Symbols mode, you can use your phone’s keypad to enter
symbols (such as “@” or “%”) or punctuation (such as “?” or “!”)
into a text message.
3. Press the key that corresponds with the emoticon that you
wish to enter.
1. While composing a text message memo, press the Left
soft key, then select Symbols. The first of three symbol lists
pops-up on the screen.
Example: Press
for the “:D” emoticon.
4. Repeat these steps to insert additional emoticons into your
2. Use the Prev and Next soft keys to page through the other
message or memo.
symbols, if desired.
3. Press the key that corresponds with the symbol that you
wish to enter.
Example: Press
for an exclamation point (!).
4. Repeat these steps to insert additional symbols into your
message or memo.
Entering Emoticons
In Emoticons mode, you can use your phone’s keypad to enter
emoticons [such as “;-)” or “8-)”] into a text message.
1. While composing a text message or memo, press the Left
soft key, then select Emoticons. The first of two emoticon
lists pops-up on the screen.
Entering Text
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 6: Understanding Your Contacts
This section details how you can manage your daily contacts by
storing their names and numbers in your Contacts list. You can
have your Contacts entries sorted by name.
Tip: You can also access the Find option from Standby mode, by pressing the
Contacts soft key.
• Add New Contact — Add a number or Email address to your
Contacts.
Contacts
Up to 1000 entries can be stored in Contacts. Each entry can
have up to five associated phone numbers and one Email
address. Each phone number can be up to 32 digits in length,
page 21 for more information), and associated names can be up
to 32 characters in length. You can assign the Speed Dial
numbers of your choice for each entry. You can also mark your
Contacts list as Restricted to prevent unauthorized viewing. (For
• Speed Dial — Assign a Contacts entry to a Speed Dial number.
• Group — Review, send messages to, add Contacts to, or rename
four out of your five groups. (For more information, refer to
• Memory Info — Display used and available memory for Contacts
entries.
2. Select the option of your choice.
Note: You can also press the keypad number key that corresponds to the
Tip: Speed Dial One-Touch Dialing Two-Touch Dialing, and Three-Touch
,
menu option number.
Dialing allow you to call numbers stored in Contacts faster.
Finding a Contacts Entry
Shortcut Key Method
Open Contacts
1. In Standby mode, press Menu ( ), then select Contacts
The following options appear in the display:
• Find — Find a Contacts entry by name.
.
If you’ve stored a name entry in Contacts, Find allows you to find
it quickly by entering the first few letters of a Contact’s name.
1. In Standby mode, press the Contacts soft key.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
–
Send Name Card Via Bluetooth — Send selected Contacts to
another Bluetooth device.
The Find screen appears in the display with the Go To field
highlighted, followed by the first few names in your
Contacts list.
Select the desired option to access its sub-menu appears in the display.
Voice Method
Tip: You can also access the Find screen from Standby mode by pressing
Use the VoiceSignal Lookup command to view contact
information for any named contact stored in your Contacts list by
saying the name.
Menu
(
), then selecting Contacts
➔
Find.
2. Enter the first few characters of a name as entered in
Contacts. For example, if you saved the name as “Amy
Smith”, begin the search by pressing (for “A”).
Note: The Lookup command shows the requested Contact information in the
display but does not dial a phone number for the contact.
As you enter letters, the names of the closest matches
appear in the display.
To look up information for a specific contact:
1. In Standby mode, press and hold
to launch
3. When the desired entry is listed in the display, press the
VoiceSignal.
Navigation key Up/Down to highlight the entry.
“Say a Command” appears in the display and is
•
•
•
•
Press
Press the Edit soft key to add or change information for this entry.
Press VIEW ) to show information about the entry.
to dial the number associated with the name.
pronounced through the speaker.
2. Say “Lookup”.
(
VoiceSignal prompts you to “Say the name.
”
Press the Options soft key. The following options appear in the
display:
3. Speak clearly and say the full name of the person you want
–
–
Send Message — Create and send a Text/Picture/Video message to
the selected Contact.
to call, exactly as it is entered in your Contacts list.
•
If VoiceSignal recognizes the name you said, the Contact entry
information for that name appears in the display.
Call — Dial the number associated with the name.
Understanding Your Contacts
40
Download from Www.Somanuals.com. All Manuals Search And Download.
•
If VoiceSignal does not recognize the name you said, a choice list of
up to three names appears in the display, and VoiceSignal prompts
you with “Did you say?” followed by the first name on the list.
Quick Search Method
4. Say “Yes” to confirm the name or “No” to hear the next
name, or use the keypad to select the correct name from
1. In Standby mode and with Quick Search enabled, press the
first few numeric keys that correspond to the letters of the
Contact’s name.
Example: To search for “Sally” you would enter 725
.
•
•
To say the name again, press Repeat
.
To exit VoiceSignal without dialing, press Settings and press Exit
.
2. Press the Up navigation key. A list of Contact names that
begin with letters corresponding to the number keys you
pressed appears in the display.
5. The contact information for the name you selected appears
in the display.
•
•
To dial the default number associated with the name, press
.
3. Highlight the searched for Contact.
To remove this entry from your Contacts list, press the Erase soft
key.
•
•
To call the Contact, press
To view the Contact, press
.
•
•
To add or change information for this entry, press EDIT
(
).
.
To access the following options, press the Options soft key.
Adding a New Contacts Entry
You can use either of two methods to add an entirely new entry to
Contacts.
–
Send Message — Create and send a Text/Picture/Video message to
the selected Contact.
–
–
Call — Dial the number associated with the Contact name.
Dial Method
Send Name Card Via Bluetooth — Send the select Contact’s
1. Using the keypad, enter the number you wish to add to
information to another Bluetooth device.
your Contacts.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Press the Save soft key. The following options appear in
the display:
• Create New — Lets you create a new Contacts entry.
3. Highlight one of the following fields:
• Update Existing — Lets you add the number you entered to an
•
•
•
Mobile
Home
Work
•
•
•
Pager
Email
Group
•
•
Ringtone
Fax
existing Contacts entry.
3. Select Create New
.
The Create New screen appears in the display showing the
4. Enter a phone number or Email address in the highlighted
following icons:
field.
Mobile
Pager
Home
Fax
Work
5. Repeat steps 3 and 4 as needed.
6. Press
to save the new entry.
Editing a Contacts Entry
4. Select the number type that matches your new entry.
Editing Contacts Name and Numbers
5. Use the keypad to enter a name to associate with the
Contacts entry.
6. Press SAVE
(
) to save the entry.
Menu Method
2. Use the Navigation key to highlight the entry and press
1. In Standby mode, press Menu
Add New Contact
(
), then select Contacts
VIEW
(
). The View Contact screen appears in the display
➔
.
showing the highlighted entry’s information.
The Add New Entry screen appears in the display with the
Name field highlighted.
Understanding Your Contacts
Download from Www.Somanuals.com. All Manuals Search And Download.
42
3. Use the Navigation key to review the information for the
entering these numbers, you can store them in a Contacts entry
with the phone number and with special characters called
pauses, up to a maximum of 32 digits.
entry that you wish to change, then press EDIT
(
). The
Edit Contact screen appears in the display.
•
Wait — Stops the calling sequence until the phone receives further
input.
4. Use the Navigation key to highlight the particular
information you want to add or change.
•
2-Sec Pause — Stops the calling sequence for two seconds, then
sends the remaining digits.
•
•
Press
to backspace and delete numbers or letters.
Press and hold
field.
to clear all numbers or letters in the highlighted
Note: You can enter multiple 2-Sec Pauses to extend the length of a pause.
For example, two consecutive 2-Sec Pauses cause a total pause time
of four seconds. Keep in mind that pauses count as digits towards the
32-digit maximum.
5. When you’re finished changing the Contacts entry:
•
•
To save your changes, press
.
To add pauses to a Contacts entry number, do the following:
1. Find the Contacts entry associated with the number you
want to include one or more pauses. (For more
To discard your changes, press . You are prompted to confirm
exiting without saving your changes. Press the Yes soft key to
discard your changes.
•
Press the Options soft key.
The following options pop-up in the display:
–
Send Message — Create and send a Text/Picture/Video message to
the selected Contact.
–
–
Call — Calls the selected contact.
Send Name Card Via Bluetooth — Sends a name card to the
selected contact using Bluetooth.
3. Press Options. The following pause options appear in the
display:
Add Pauses to Contacts Numbers
• Set Speed Dial — Lets you assign a Speed Dial number for this
Contacts entry.
Calls to automated systems such as banking services often
require a password or account number. Instead of manually
43
Download from Www.Somanuals.com. All Manuals Search And Download.
• Set as default — Your phone automatically dials this number
Edit an Existing Email Address
when you find this Contacts entry and press the key.
• Wait — A hard pause (waits for input from you).
• 2-Sec Pause — A 2-second pause after which dialing resumes.
4. Select the pause option of your choice to add it to the
number sequence.
2. Highlight the desired Contacts entry, then press the Edit
soft key.
5. When you’re finished entering information, press
to
The Edit Contact screen appears in the display.
store the number to Contacts.
3. Highlight the Email field.
Pause Dial from Contacts
1. If you stored the number using 2-second pause(s), simply
find the Contacts entry, highlight the number, and press
5. Press
to save your changes.
Assigning a Ringtone to a Contacts Entry
2. If you stored the number using Wait(s), find and dial the
number from Contacts and wait for the appropriate prompt
from the dialed number.
When you assign a ringtone to a Contacts entry, the phone plays
the ringtone that you assigned to the entry when you receive a
call from that Contact instead of the ringtone currently assigned
to Voice Calls.
3. Press
to resume dialing the number.
2. Highlight the desired Contact, then press the Edit soft key.
Understanding Your Contacts
Download from Www.Somanuals.com. All Manuals Search And Download.
44
The Edit Contact screen appears in the display.
2. Press the Save soft key. The Save menu appears in the
display showing the following options:
3. Highlight the Ringtone field, then press the Set soft key.
• Create New — Lets you create a new Contacts entry.
The Ringtone list appears in the display showing music,
• Update Existing — Lets you add the number you entered to an
existing Contacts entry.
recorded audio, and ringtone files.
4. Select the music, recorded audio, or ringtone file that you
3. Follow the instructions in the upcoming sections
depending on whether the number is a new entry or you
wish to add it to an existing entry.
wish to assign to the Contacts entry.
The Edit Contact screen reappears in the display with the
name of the selected file in the Ringtone field.
Create a New Entry
1. In Standby mode, press Menu ( ), then select Contacts
5. Press
to save the ringer assignment to the selected
.
Contacts entry.
2. Select Add New Contact and press
.
Saving a Number After a Call
3. Select the number type that matches your new entry.
Once you finish a call, you can store the caller’s number to your
Contacts list.
Note: If the call was incoming and Caller ID information was unavailable,
5. Press
. The new entry saves to your Contacts list.
then the Save option is also unavailable.
1. Press
to end your call. The call time, length of call,
phone number, and name of the party (if available) appear
in the display.
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Add to an Existing Entry
1. Highlight the desired Contact, then press the Edit soft key.
The following number type options appear in the display:
You can assign one or more Speed Dial numbers to a Contacts
entry during new entry creation or by editing an existing entry.
Assignment to an Existing Entry
Mobile
Pager
Home
Fax
Work
2. Highlight the desired entry.
2. Select the desired unassigned number type. The Contacts
entry information appears in the display with the new
number posted in the appropriate number type field.
3. Press Edit. The Edit Contact screen appears in the display.
4. Highlight the number field you wish to assign a Speed Dial
number.
3. Press
again to save your changes to the existing entry.
5. Press Options
6. In the Go to field, enter an unassigned location number and
press SET
➔
Set Speed Dial.
Speed Dial
A Contacts entry’s Speed Dial number corresponds to the number
keys you press to speed dial one of that entry’s numbers.
.
7. At the Add contact to speed dial prompt, press Yes
.
Example: To speed dial the Contacts entry assigned to Speed Dial 5, press
and hold
, (1-touch dialing).
Changing a Speed Dial Location
To speed dial the Contacts entry assigned to Speed Dial 35, press
then press and hold , (2-touch dialing).
To speed dial the Contacts entry assigned to Speed Dial 235, press
, press , then press and hold , (3-touch dialing).
2. Highlight the desired entry.
Understanding Your Contacts
46
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press Edit. The Edit Contact screen appears in the display.
Add Contacts Entry to a Group
Using Add New/Edit Contact Option
4. Highlight the number field marked by the Speed Dial icon
(
).
To add a Contact to a Group using either the Add New Contact
option or the Edit Contact option, do the following:
5. Press the Options soft key. The following options appear in
the display:
Group.
• Remove speed dial — Unassign the current speed dial number.
• Set as default — Set the number the phone dials when Contacts
dialing, speed dialing, or voice dialing.
• Wait — A hard pause (waits for input from you).
2. Highlight the Group field, then press the Set soft key.
• 2-Sec Pause — A 2-second pause after which dialing resumes.
The Select Group screen appears in the display showing
Groups similar to the following:
• General
6. Select Remove Speed Dial. “Remove speed dial?” pops up
• Family
in the display to confirm your desire to remove the entry.
• Friends
7. Press the Yes soft key to remove the Speed Dial
assignment. “Speed Dial Removed” pops up in the display,
and you are returned to the Edit Contact screen.
• Colleague
• Business
3. Select the Group to which you want to assign the selected
Contacts Groups
Contact.
Contact Groups let you easily send messages to multiple,
selected Contacts. You can also use Groups to find Contact
entries and to add/remove Contacts names in a Group or to
create or rename a Group.
You are returned to the Add New Entry
/Edit Contact screen
and the selected Group name populates the Group field.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Press
to save your changes.
3. Select Add. The Add Contacts screen appears in the display
showing a list of Contacts entries.
Using Group Add Option
4. Do one of the following:
The Add option lets you add one or more existing Contacts to a
Group.
•
Use the Navigation key to highlight an entry you want to add to the
group, then press MARK
(
). A check mark appears in the entry’s
1. In Standby mode, press Menu
Group
(
), then select Contacts
check box.
➔
.
Repeat as needed to check all the desired Contacts.
Press the Options soft key. Choose Mark All or Unmark All
The Group List screen appears in the display showing
•
.
Groups similar to the following:
Note: To unmark a marked Contact, highlight the Contact and press MARK to
• General
clear the check mark.
• Family
5. When you have marked the Contacts you want to add to
the group, press Done. “Contact added to group” appears in
the display, followed by the selected Group list including
the added Contacts.
• Friends
• Colleague
• Business
2. Highlight a Group, then press the Options soft key. The
following options popup in the display:
Remove Contacts Entry from a Group
• Send Message — Send a Text/Picture/Video message to the
1. In Standby mode, press Menu
Group. The Group List screen appears in the display.
2. Highlight the Group (other than No Group) from which you
want to remove a Contact, then press VIEW ).
(
), then select Contacts
selected Group.
➔
• Rename — Change the name of the selected Group.
• Erase — Delete the selected Group. Any contacts in the deleted
group remain in the General Group.
(
• Add — Add one or more Contacts to the selected Group.
Understanding Your Contacts
Download from Www.Somanuals.com. All Manuals Search And Download.
48
A list of the Contacts assigned to the selected Group
appears in the display.
4. When you have completed your changes to the Group
name, press SAVE ).
Group Renamed” appears in the display followed by the
Group List screen showing your renamed Group.
(
3. Highlight the Contact you wish to remove.
“
4. Press the Remove soft key. You are prompted to confirm
the removal of the selected Contact.
Add a New Group
5. To remove the selected Contact from this Group and return
The New option lets you add Groups.
1. In Standby mode, press Menu
Group. The Group List screen appears in the display.
it to General Group, press the Yes soft key.
(
), then select Contacts
➔
To keep the selected Contact in this Group, press the No
soft key.
2. Press the New soft key. The New Group screen appears in
the display.
Rename a Group
The Rename option lets you change the name any of the Groups,
except General Group.
1. In Standby mode, press Menu
Group. The Group List screen appears in the display.
2. Highlight the Group name other than No Group that you
wish to change, then press Options Rename
(
), then select Contacts
4. When you have completed entering the new Group name,
➔
press SAVE
(
). “Group Saved” appears in the display
followed by the Group List screen showing your new
➔
.
Group.
The Rename Group screen appears in the display.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Erase a Group
Memory Info
The Erase option lets you delete a Group, thus freeing you to
reassign the Contacts formerly in the Group.
The Memory Info menu option lets you view the amount of
memory you have used to store Contacts entries, as well as the
memory remaining to store more Contacts entries.
1. In Standby mode, press Menu
Group. The Group List screen appears in the display.
2. Highlight the Group that you wish to delete, press the
Options soft key, then select Erase
(
), then select Contacts
ᮣ
In Standby mode, press Menu
Memory Info
(
), then select Contacts
➔
➔
.
The Memory Info Contacts screen appears in the display
showing the Total amount of memory in your phone, the
amount of memory Used to store Contacts entries, and the
remaining (Free) for Contacts entries.
.
You are prompted to confirm the Group erasure.
3. To confirm erasure of the Group, press the Yes soft key. To
retain the Group, press the No soft key.
Deleting a Contacts Entry
2. Highlight the desired entry, press the Options soft key, then
select Erase. The phone prompts you to confirm the
erasure.
3. To confirm erasure of the selected Contact, press the Yes
soft key. To retain the Contact, press the No soft key.
Understanding Your Contacts
Download from Www.Somanuals.com. All Manuals Search And Download.
50
Section 7: Messaging
This section explains how to send or receive different types of
messages. This section also describes the features and
functionality associated with messaging.
Tip: To launch the Create Txt Msg screen using a voice command — In
Standby mode, press and hold
until the phone prompts, “Say a
command.” Say “Send Text” into the microphone. You are then prompted
to say a Contact name or a number for the first recipient of the
message.
Types of Messages
Your phone is able to send and receive Text and Picture/Video
messages to compatible phones and devices. Text messages can
be up to 160 characters in length.
2. Enter the phone number or Email
address of the recipient, then press
. The Text: field appears in the
display.
Note: As many as 70 text messages can be stored, regardless of memory
capacity. But in the case of MMS, up to 50 messages can be stored
depending on the available memory.
3. Enter the text content of your
message using the keypad. (For
Create and Send Text
Messages
1. In Standby mode, press the Msgs
soft key, then select Send Message
4. Press the Options soft key to complete the message text
and set message send options. The following options
appear in the display:
➔
Text Message. The Create Txt
Msg screen appears in the display
showing the To: list.
• Edit Send To — Edit the recipient’s number or email address.
• Add Quick Text — Insert pre-composed text in the message.
• Save As Draft — Save the message to the Draft folder.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
• Priority Level — Choose Urgent or Normal
.
•
View Later — Saves the message to the Inbox, to view later, then
returns the phone to Standby mode.
• Validity Period — Enter the Date when this message becomes
invalid, then use the Left and Right navigation keys to choose the
Time.
If the Message View set to Chat (the default setting), multiple text
messages exchanged with one Contact or number appear in the
display like a chat session.
• Deferred Delivery — Select the Date and Time you want this
message delivered.
Receive Messages While in a Call
• Enh. Delivery Ack — Choose On or Off — Requests confirmation
when the message is received.
When you receive a message while in a call, New Message
appears in the display along with the closed envelope icon
• Add To Contacts — Save the recipient’s number or Email address
as a Contacts list entry.
(
). The date and time of the message also appear in the
display along with the following options:
5. Once you’re finished entering the message, Press SEND
•
•
View Now — Opens the message, where you have the option to
Forward, Reply With Copy, Save Quick Text, Lock, Add To Contacts,
Message Info, or Extract.
(
) when you are finished entering the message.
Receive Text Messages
When you receive a message in Standby
mode, the ringer sounds (unless turned
off) and New Message appears in the
display along with the closed envelope
View Later — Saves the message to the Inbox, to view later, and
returns the phone to call mode.
Select the preferred option.
View a Text Message Now
icon (
). The date and time of the
1. After selecting the View Now option, the new text message
appears in the display.
message also appear in the display along
with the following options:
•
View Now — Opens the message, where
you have the option to Forward, Reply With
Copy, Save Quick Text, Lock, Add To Contacts, Message Info, or
Extract.
2. Press the Options soft key while viewing the message. The
following options appear in the display:
• Forward — Send a copy of this message to another recipient.
Messaging
52
Download from Www.Somanuals.com. All Manuals Search And Download.
• Reply With Copy — Compose and send a reply message to the
originator of the received message and include a copy of the
original message.
Send Picture / Video Messages in Camera /
Camcorder Mode
Picture and Video messages can be sent to recipients with
compatible phones or devices. You can also accompany a Picture
message with a voice memo or preloaded sound.
• Save Quick Text — Save the text in this message as a new Quick
Text.
• Lock Unlock — Block/permit erasure of the highlighted
/
message.
Tip: You can send a Picture/Video message to up to ten recipients. Enter
each recipient’s address or phone number in a separate Send to field of
the Picture/Video message composer.
• Add To Contacts — Save the sender’s number to the Contacts list.
• MessageInfo — Shows message delivery status, addressee, size,
and so on.
1. In Standby mode, press the Camera key (
). The
• Extract — Lets you call the originator of the highlighted message.
camera viewfinder screen appears in the display.
To launch the Camcorder, in Camera mode, press the
3. Select an option to perform its function.
Options soft key, then select Camcorder
2. Using the display as a viewfinder, when the image that you
wish to send appears in the display, press TAKE Record
) to take a picture or record a video.
To stop video recording, press Stop ).
.
/
View a Text Message Later
1. In Standby mode, press the Msgs soft key, then select
Inbox. The Inbox screen appears in the display.
(
(
2. Select the new message. The new text message appears
Note: For more information about using the Camera-Camcorder feature on
in the display.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press Send
(
) to save the
6. Press the Down navigation key until the Text field is
highlighted, then enter the message text using the keypad.
picture/video and begin the Picture/
Video message delivery process.
The Create Pic Video Msg screen
/
appears in the display with the
7. The new picture/video displays in the Picture Video field.
/
Send To list highlighted.
8. If you wish to add a sound file to the Picture message,
highlight the Sound field and do the following; otherwise,
proceed to step 10.
4. Enter the phone number or Email
address of the recipient of the Picture/Video message, then
press
.
•
Press the Sounds soft key. The Ringtone screen appears in the
display showing the following options:
Tip: Press the Add soft key to display a pop-up menu containing: Contacts
Groups and Recent Calls. These options allow you to find and add
recipients to the Send To list.
,
–
Record New — Record a new memo to insert into the message.
Note: You can record and insert a voice memo of up to 60 seconds in length,
if you record first before attaching a picture. If a picture is attached
before recording, the size of the voice memo is limited to the amount
of remaining memory.
5. The Subject field appears in the
display. Enter a subject for the
Picture/Video message using the
keypad. (For more information,
–
Audio files list — Select from the list of previously recorded voice
memos and preloaded audio files on the phone.
Select an option, a sound file, and insert the sound into the message.
To exit the pop-up menu without inserting a sound, press
.
9. Press the Options soft key to complete the message text
and set message send options.
Messaging
54
Download from Www.Somanuals.com. All Manuals Search And Download.
The following options appear in the display:
Send Picture / Video Messages in Standby Mode
•
Preview — View the Picture/Video message as the recipient will
see it.
Send Picture/Video messages to recipients with a compatible
phone or other device. You can also accompany a Picture
message with a voice memo or preloaded sound.
•
•
•
•
Add Quick Text — Add pre-composed text to the message.
Save As Draft — Save the message to the Draft folder.
Tip: You can send a Picture/Video message to up to ten recipients. Enter
each recipient’s address or phone number in a separate Send To field of
the Picture/Video message composer.
Priority Level — Choose Urgent Normal, or Low.
,
Validity Period — Enter the Date when this message becomes
invalid, then use the Left and Right navigation keys to choose the
1. In Standby mode, press the Msgs
Time
.
soft key, then select Send Message
• Deferred Deliv. — Lets you specify a Date and Time when the
message is delivered.
➔
Picture Message
Message
The Create Pic
/
Video
•
Delivery Ack — Choose On or Off — Requests confirmation when
the message is received.
.
/
Video Msg screen
•
•
•
Remove Video — Remove the video from the Video message.
appears in the display showing the
Remove Pic — Remove the picture from the Picture message.
To: list.
Remove Sound — Remove the sound file from the Picture
message.
Tip: To launch the Create Pic Msg screen using a voice command — In
•
Add To Contacts — Save the recipient’s number or Email address
as a Contacts list entry.
Standby mode, press and hold
until the phone prompts, “Say a
command.” Say “Send Picture” into the microphone. (To launch the
Create Video Msg screen, say “Send Video”.) You are then prompted to
say a Contact name or a number for the first recipient of the message.
Select the desired option.
10. Press SEND
(
) to send the message. “Sending Message”
2. Enter the phone number or Email address of the recipient
appears in the display and a progress bar indicates the
send status.
using the keypad, then press
.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip: Press the Add soft key to display a pop-up menu containing: Contacts
Groups and Recent Calls. These options allow you to find and add
recipients to the Send To: list.
,
Note: For more information about using the camera feature in the phone, see
•
Press
to add the highlighted picture to the message.
3. The Subject field appears in the
display. Enter a subject for the
Picture/Video message using the
keypad. (For more information,
You are returned to the Create Pic Msg screen with the
selected picture in the Picture field.
7. If you wish to insert a sound into the Picture message, use
the Down navigation key to highlight the Sound field and
do the following; otherwise, proceed to step 8.
•
Press the Sounds soft key. The Ringtone screen appears in the
display showing the following options:
4. Press the Down navigation key until
the Text field is highlighted, then enter the message text
–
Record New — Record a new memo to insert into the message.
Note: You can record and insert a voice memo of up to 60 seconds in length,
if you record first before attaching a picture. If a picture is attached
before recording, the size of the voice memo is limited to the amount
of remaining memory.
5. Press the Down navigation key until the Picture Video field
/
is highlighted, then press the Picture soft key. A photo/
–
Audio files list — Select from the list of previously recorded voice
memos and preloaded audio files on the phone.
video gallery of thumbnail images appears in the display.
6. Highlight a picture/video to add to the message, then do
Select an option, a sound file, and insert the sound into the message.
To exit the pop-up menu without inserting a sound, press
the following:
.
•
If you want, press the View soft key to expand the highlighted
picture to full-screen size.
•
If you want to include a new picture, press the Camera soft key.
Messaging
56
Download from Www.Somanuals.com. All Manuals Search And Download.
8. Press the Options soft key to complete the message text
and set message send options. The following options
appear in the display:
9. Press
to send the message. “Pic Msg Sending”
appears in the display and a progress bar indicates the
send status.
• Preview — View the Picture/Video message as the recipient will
see it.
Receive Picture / Video Messages
When you receive a Picture/Video
message in Standby mode, the ringer
sounds (unless turned off) and New
Message appears in the display with an
unopened envelope with the Picture/Video
icon.
• Add Quick Text — Add pre-composed text to the message.
• Save As Draft — Save the message to the Draft folder.
•
Priority Level — Choose Urgent, Normal, or Low.
• Validity Period — Enter the Date when this message becomes
invalid, then use the Left and Right navigation keys to choose the
Time
.
The date and time of the message also
appear in the display along with the
following options:
• Deferred Deliv. — Lets you specify a Date and Time when the
message is delivered.
• Delivery Ack — Choose On or Off — Requests confirmation
when the message is received.
•
View Now — Retrieves and opens the message, where you have the
option to Reply, Play again, Forward, Erase, Save Picture/Video, Save
Sound, Lock, Add to Contacts, Message Info or Extract.
•
Remove Video — Remove the video from the Video message.
• Remove Pic — Remove the picture from the Picture message.
•
•
View Later — Saves the message to the inbox, to view later, then
returns the phone to Standby mode.
• Remove Sound — Removes the sound file from the Picture
message.
Reject — Allows you to reject the message.
• Add To Contacts — Save the recipient’s number or Email address
as a Contacts list entry.
Select the desired option.
Select an option to invoke its function.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
View a Picture / Video Message Later
1. In Standby mode, Msgs soft key, then select Inbox. The
Inbox appears in the display.
3. Press the Options soft key while viewing the message. The
following options appear in the display:
• Play Again — Play the picture message sound file again.
• Forward — Send a copy of this message to another recipient.
• Erase — Erase the selected message.
2. If the new picture message is not highlighted, select the
new message. “Connecting” appears in the display
followed by “Receiving Message” and a progress bar
indicating that the message is downloading to the phone.
• Save Picture— Save the picture included in this message to the
Picture folder.
• SaveVideo— Save the video included in this message to the Video
folder.
3. Once a Picture message has been downloaded to the
phone, the new Picture message appears in the display. If
the message includes a sound file, the phone begins
playing it.
• Save Sound— Save the sound file included in this message to the
Ringtone folder.
• Save Quick Text — Save the text in this message as a new Quick
Text.
View a Picture Message Now
1. After you select the View Now option, “Connecting
• Lock Unlock — Block/permit erasure of the highlighted
/
message.
”
• Add To Contacts — Save the sender’s number to the Contacts list.
appears in the display followed by “Receiving Message
and a progress bar indicating that the message is
downloading to the phone.
”
• Message Info — Shows message delivery status, addressee, size,
and so on.
• Extract — Calls the sender of the received message.
2. After the Picture message has downloaded, an alert
4. Select an option to invoke its function.
sounds, and the new Picture message appears in the
display. If the message includes a sound file, the phone
begins playing it.
Messaging
58
Download from Www.Somanuals.com. All Manuals Search And Download.
• Save Quick Text — Save the text in this message as a new Quick
Message Boxes
Your phone stores messages in any one of five message boxes.
The subsections that follow describe each message box in detail.
Text.
• Save Picture — Pic Msg — Save the picture in this message into
the Picture folder.
Inbox
• Save Video — Video Msg — Save the video in this message into
the Video folder.
Received messages of all types (except Voicemail) are stored in
the Inbox.
• Save Sound — Save the sound file included in this message to the
Ringtone folder.
1. In Standby mode, press the Msgs soft key, then select
• Lock Unlock — Block/permit erasure of the highlighted
/
Inbox. A list of incoming messages appears in the display.
message.
• Add To Contacts — Save the sender’s number to the Contacts list.
Tip: While in a call, press Options, then select Message to open the Messages
menu.
• MessageInfo — Shows message delivery status, addressee, size,
and so on.
2. Select the message that you wish to view. The contents of
• Extract — Calls the sender of the received message.
the highlighted message appears in the display.
4. Select an option to invoke its function.
3. While viewing the message press the Options soft key. The
Managing Inbox Messages
following options appear in the display:
1. In Standby mode, press the Msgs soft key, then select
Inbox. A list of incoming messages appears in the display.
• PlayAgain — Pic/Video Msg — Play the sound file included in the
picture message again.
2. Highlight a message in the list.
• Forward — Send a copy of this message to another recipient.
3. Press Erase to remove the highlighted message from the
• Reply With Copy — Compose and send a reply message to the
originator of the received message and include a copy of the
original message.
Inbox.
• Erase — Pic Msg — Delete the picture from this message.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Review Messages in the Outbox
4. To access other options, press the Options soft key. The
following options appear in the display:
1. In Standby mode, press the Msgs soft key, then select
Outbox. The list of sent messages appears in the display.
• Reply — Compose and send a reply message to the originator of
the received message.
2. Highlight a message that you wish to review, then press
• Reply With Copy — Compose and send a reply message to the
originator of the received message and include a copy of the
original message.
OPEN
(
).
3. Press the Options soft key while viewing the message. The
• Forward — Send a copy of this message to another recipient.
following options appear in the display:
• Lock Unlock — Block/permit erasure of the highlighted
/
• Play Again — Pic Msg — Play the sound file included in the
message.
picture message again.
• Add To Contacts — Save the sender’s number to the Contacts list.
• Forward — Send the highlighted message to another recipient.
• Erase Multiple — Delete selected unlocked messages from the
Inbox.
• Erase — Pic Msg — Delete the picture from this message.
• Lock Unlock — Block/permit erasure of the highlighted
/
• Message Info — Shows message delivery status, addressee, size,
and so on.
message.
• Save Quick Text — Save the message text as Quick Text for
insertion into other messages.
5. Select an option to perform its function.
Outbox
• Add To Contacts — Save the recipient’s number to the Contacts
list.
Your phone stores messages in the Outbox, regardless of
whether the message was successfully transmitted. Verify if and
when a message or Email was successfully received by enabling
the Delivery Ack feature.
• Message Info — Shows message delivery status, addressee, size,
and so on.
• Extract — Calls recipient of this message.
4. Select an option to perform its function.
Messaging
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Messages and Lock Mode
4. Select an option to perform its function.
The phone can still receive messages while in Lock Mode. The
time and date of the message appear in the display, but you
cannot access the message until you enter the lock code.
Draft Box
Messages in the Draft Box are those that were composed but
never sent. You can return to the Draft Box at any time to view,
edit, or send a draft message.
Managing Outbox Messages
1. In Standby mode, press the Msgs soft key, then select
Outbox. The list of sent messages appears in the display.
Create a Draft Message
1. In Standby mode, press the Msgs soft key, then select Send
2. Highlight a message, then press Erase to remove the
Message
➔
Text Message
/
Picture Message
/
Video
Create
highlighted message from the Outbox.
Message. The Create Text Msg
/
Create Pic Msg
/
Video Msg screen appears in the display showing the To:
3. Press the Options soft key. The following options appear in
the display:
list.
• Forward — Send the highlighted message to another recipient.
2. Enter the phone Number or Email address of a recipient,
• Resend — Re-send the highlighted message to the original
recipient.
then press
.
3. Compose a message using the keypad, then press the
Options soft key and select Save As Draft. A confirmation
message appears in the display and the message saves to
the Drafts box.
• Lock Unlock — Block/permit erasure of the highlighted
/
message.
• Add To Contacts — Save the recipient’s number to the Contacts
list.
• Erase Multiple —Delete selected unlocked messages from the
outbox.
• MessageInfo — Shows message delivery status, addressee, size,
and so on.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
View and Edit Draft Messages
• Save As Draft — Saves the message to the Drafts box.
• Priority Level — Choose Urgent or Normal for text messages. In
the case of picture or video messages, you can select a Low
priority.
1. In Standby mode, press the Msgs soft key, then select
Drafts. A list of any draft messages that you’ve saved
appears in the display.
• Validity Period — Enter the Date when this message becomes
invalid, then use the Left and Right navigation keys to choose the
Time.
2. Highlight a message that you wish to view or edit, then
press EDIT
(
). The Create Text Msg
/
Create Pic Msg
/
• Deferred Delivery — Lets you specify a Date and Time when the
message is delivered.
Create Video Msg screen appears in the display showing
the To: list.
• Enh. Delivery Ack — Choose On or Off — Requests confirmation
when the text message is received. In the case of picture or video
messages, the Delivery Ack option is displayed.
3. Enter or change the recipient’s number and/or Email
address and the message Text (Txt Msg) or Subject and
Text (Pic Msg) using the keypad. (For more information,
• Remove Pic — Pic Msg — Removes the picture file currently
included in the message.
• Remove Sound — Pic Msg — Removes the sound file currently
included in the message.
4. Press the Options soft key to complete the message and
set message send options. The following options appear in
the display:
• Remove Video — Video Msg — Removes the video file currently
included in the message.
• Add To Contacts — Save the recipient’s number or Email address
to the Contacts list.
• Edit Send To — Txt Msg — Change, add, or remove recipients
from this message.
5. Select an option to perform its function.
• Preview — Pic/Video Msg — View the message as the
recipient(s) sees it.
6. Press SEND
(
) when you are finished composing the
message.
• Add Quick Text — Inserts pre-composed text into the message
text.
Messaging
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Managing Draft Messages
• Erase Multiple —Delete selected unlocked messages from the
draft messages list.
1. In Standby mode, press the Msgs soft key, then select
Drafts. A list of any draft messages that you’ve composed
appears in the display.
5. Select an option to perform its function.
Voicemail
Messages in the voice mailbox are logged in the Voicemail box of
the Messages menu. Open the Voicemail box to view the
Callback # (if available), Urgency, and other details of the
Voicemail message.
2. Highlight a message.
3. To remove the highlighted message from the Drafts box,
press the Erase soft key. You are prompted to confirm
erasure of the highlighted draft message.
Listen to Voicemail Now
•
•
Press the Yes soft key to erase this draft message.
Once you’ve received a new voicemail message, you have the
option to either:
Press the No soft key To keep this draft message in the Drafts box.
4. For other options, press the Options soft key. The following
•
Listen Now — Calls your voice mailbox and allows you to listen to
your messages.
options appear in the display:
•
Listen Later — Returns to Standby mode where you can later choose
to call your mailbox and review your messages.
• Send — Send the highlighted message to the original recipient, if
the recipient’s number and/or Email address is included with the
draft message.
Select an option to perform its function.
• Lock Unlock — Block/permit erasure of the highlighted
/
Listen to Voicemail Later
message.
If you choose to review your voicemail messages at a later time:
1. In Standby mode, press the Msgs soft key, then select
Voicemail. The Voicemail screen appears in the display,
showing the number of new voicemail messages received
and the date and time the latest message was received.
• Add To Contacts — Save the recipient’s number and/or Email
address to the Contacts list.
• Save Quick Text — Save the message text as Quick Text for
insertion into other messages.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Highlight a voice message.
3. Press or to call your voice mailbox and listen to
the message.
2. Select the messages that you wish to delete. You’re
prompted to confirm the erasure of all messages in the
selected box or in all boxes.
3. To delete the messages, press the Yes soft key. To cancel
Note: You can also press and hold
to dial your voice mailbox.
deleting the messages, press the No soft key.
Message Settings
Erase Messages
Use the Msg Settings sub-menus to define general settings and
text message settings.
Using Erase Messages, you can erase all of the messages in
each of your boxes from one convenient location.
General Message Settings
1. In Standby mode, press the Msgs soft key, then press Msg
Note: This function erases all messages in a selected box. To delete a single
message, open the box from the Messages menu, highlight a message,
open the message if you want, then press Erase to delete it.
Settings
➔
General.
1. In Standby mode, press the Msgs soft key, then select
The following options appear in the display:
Erase Messages
.
• Auto Save — Choose whether messages are saved automatically
when you exit them (On Off, Prompt).
,
The following options appear in the display:
• Auto Erase — Choose to receive (On) or not receive (Off) a
warning message when you delete a message.
• Inbox — Deletes all unlocked messages stored in the Inbox.
• Outbox — Deletes all unlocked messages stored in the Outbox.
• Drafts — Deletes all unlocked messages stored in the Drafts box.
• Quick Text — Edits pre-composed messages to insert into new
messages.
• Voicemail # — Edits or views your Voicemail number.
• AllMessages — Deletes all unlocked messages stored in all of the
message boxes, except Voicemail.
• Entry Mode — Choose the default method for entering text into
messages (T9 word
,
T9 Word
,
T9 WORD
,
abc,
Abc,
ABC
,
123).
Messaging
64
Download from Www.Somanuals.com. All Manuals Search And Download.
• Callback # — Choose whether to include a callback phone
3. To change a Quick Text:
number with outgoing messages, and enter the number to include.
•
Highlight a Quick Text you want to change, then press EDIT. (You
cannot change the pre-defined Quick Text included with the phone.)
• Signature — Choose whether to include a text signature in
outgoing message text, and enter the text to include.
Note: You cannot change or erase pre-loaded Quick Texts.
• Reminder — Select whether and how often you hear and/or feel a
reminder that you received a message (Once
,
Every 2 Minutes,
•
Enter/change the text content of Quick Text using the keypad. (For
Every 15 Minutes Off).
,
2. Select the desired option to enter the highlighted option’s
4. To erase a Quick Text:
sub-menu.
•
Highlight a Quick Text you want to erase, then press Erase. You are
prompted to confirm erasure of the highlighted Quick Text.
Editing and Entering Quick Text
1. In Standby mode, press the Msgs soft key, then select Msg
•
To erase the highlighted Quick Text, press Yes. To keep it, press No
.
Settings
appears in the display.
2. To create a new Quick Text:
Press New
➔
General
➔
Quick Text. The Quick Text sub-menu
Text Message Settings
1. In Standby mode, press the Msgs soft key, then select Msg
Settings Text Message. The following options appear in
➔
•
.
the display:
• Auto View
—
On/Off — With Auto View On, the full content of a
Tip: You can also create new Quick Text by viewing/editing an Outbox or
Drafts message and using the Save Quick Text option in the Options
text message appears in the display as the messages is received.
• Signature — Create a signature, which can be included at the
bottom of outgoing message text.
• Auto Scroll
—
On/Off — With Auto Scroll On, the full content of a
•
•
Enter/change the text content of Quick Text using the keypad. (For
text message automatically rolls upward on the display, one screen-
full at a time.
Press OK when you are finished entering Quick Text. The Quick Text
menu appears in the display with the new Quick Text highlighted.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
• Message View
—
Chat/Normal — With Message View set to
Chat (the default setting), multiple text messages exchanged with
one Contact or number appear in the display like a chat session.
2. Select the desired option to enter its sub-menu.
Picture/Video Message Settings
1. In Standby mode, press the Msgs soft key, then select Msg
Settings
➔
Picture/Video Message. The following options
appear in the display:
• Auto Receive — On/Off — With Auto Receive On, Picture and
Video messages automatically download and display as they are
received. With Auto Receive Off, you are prompted to download
Picture and Video messages.
• Signature — Create a signature, which can be included at the
bottom of outgoing Picture and Video message text.
2. Select the desired option to enter its sub-menu.
Messaging
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 8: Music Player
This section explains how to use the Music Player to:
SBH500.) (For information on available accessories, contact your
Wireless Carrier.)
•
•
Play individual music files.
Create, play, and manage Playlists of music files.
Launching the Music Player
This section also explains how to customize the Music Player to
suit the music playback preferences.
Note: Before launching the Music Player, you must have music files stored in
Music Memory and/or on a microSD™ Memory Card. (For more
Finally, this section details how to load music files into Music
Memory and/or onto a microSD™ Memory Card.
1. In Standby mode, press the Music
Player key ( ). The Music Player
screen appears in the main display.
Using Your Music Player
You can use the Music Player to play music files that were
transferred into your phone’s Music Memory and/or onto an
optional microSD™ Memory Card using a personal computer.
(For information on loading music files on a Memory Card, see
2. For information on selecting and
playing music files, refer to “Using
The r520’s Music Player can play music in the following Digital
Audio Formats:
Tip: After launching the Music Player with the slide open, you can close the
slide without interrupting music playback.
•
Unprotected AAC and AAC+
•
MP3
•
WMA and WMA Pro
The Music Player can play music through the phone’s stereo
speakers, through stereo headphones, through a stereo headset
(such as the optional Samsung AAEP404), or through a stereo
Bluetooth headset (such as the optional Samsung SBH700 or
67
Download from Www.Somanuals.com. All Manuals Search And Download.
4. Highlight a music file, then:
Using the Music Library
•
•
•
To play the file, press the Play soft key.
To select the file for playing or other options, press MARK
(
).
To select and apply any of the following options to the highlighted or
marked music file(s), depending the displayed music file list, press
the Options soft key:
2. Press the Library soft key. The Library menu appears in the
display showing the following options:
• Now Playing — Music Player mode only — Indicates number of
music files currently playing. Select this option (or press the Back
soft key) to return to the Music Player screen.
–
Mark All/Unmark All — Marks or Unmarks all listed music files for
playing, removal, or assignment of player settings.
–
–
–
Erase — Removes this file from the Memory Card and from all lists.
• All — Lists all music files on the Memory Card and lets you play
individual music files or play multiple music files by creating a
temporary music playlist.
Add to Playlist — Adds this file to a selected Playlist.
Song Info — Lists the Title, Artist, Album, Genre, File Name, Encoding
Format, Bitrate, File Size and Date of the highlighted music file.
• Artists — Lists artist names for music files on the Memory Card
and lets you play one or more music files by a selected artist.
5. Select the desired Option.
• Albums — Lists album titles for music files on the Memory Card
and lets you play one or more music files from a selected album.
• Playlists — Lists any playlists you have saved and lets you create,
save, and manage playlists.
3. Select the preferred Library option. A list of music files,
artists, albums, or playlists appears in the display.
If a list of artists, albums, or playlists is showing, select the
preferred artist, album, or playlist. A list of music files
appears in the display.
Music Player
68
Download from Www.Somanuals.com. All Manuals Search And Download.
–
–
–
Play Mode — Lets you change the play mode
from Normal, Shuffle, Repeat One, Repeat All,
or Shuffle Repeat All.
Add to Playlist — Moves you to the Playlists
menu to let you add a selected music file to a
playlist.
Remove From List — Deletes a selected
music file from the Now Playing list or the
current Playlist.
Music Player Controls
•
Music Player key
(
): In Standby
mode, press to launch the Music
Player.
•
Volume key
:
–
To play a music file louder, press the
Volume key Up.
–
To play a music file softer, press the
Volume key Down.
–
–
–
Visual Supplements — Lets you change the Music Player visualization
to Simple View, Equalizer, Lyrics, or Album Art.
Memory Info — Displays the Memory Usage screen for the Music
application showing the Total Used and the Available memory.
Song Info — Lists the Lists the Title, Artist, Album, Genre, File Name,
Encoding Format, Bitrate, Duration, File Size and Date of the
highlighted music file.
•
Navigation key:
–
–
–
To pause/resume playing a music file,
press
.
To stop playing a music file, press the
Navigation key Down.
To skip play to an earlier music file in
the selected list, press the Navigation
key Left.
Select the desired option to launch it or to its sub-menu.
–
–
To skip play to a later music file in the selected list, press the
Navigation key Right.
To return to the selected list and choose another music file to play,
press the Navigation key Up.
Loading Music Files
Using an Optional Card Reader
1. Before loading music files on a microSD™ Memory Card,
do the following:
•
•
Library soft key — Returns you to the Library screen.
Options soft key — Shows the following sub-menus and options:
–
Go to Home Screen — Returns you to Standby mode with a reduced
Music Player screen at the bottom of the display (as shown).
69
Download from Www.Somanuals.com. All Manuals Search And Download.
•
With the phone powered off, insert the Memory Card into the
1. In Standby mode, connect the smaller (micro USB) end of
the Data Cable to the r520 phone.
•
•
Power on the phone.
When the Memory Card icon (
the Memory Card from the phone. (For more information, see
) appears in the display, remove
2. Insert the Memory Card into a compatible card reader.
Note: Card readers vary. Follow the installation instructions included with the
+
card reader and personal computer.
Incorrect
3. Open the Memory Card reader drive and the Media ➔
Correct
Music folder.
2. Connect the larger (USB) end of the Data Cable to the PC.
4. Drag or download music (MP3) files into the Music folder.
5. Remove the Memory Card by following the removal
instructions for the Memory Card reader and for the
personal computer.
6. Insert the Memory Card into the phone.
Using an Optional Data Cable
To obtain a USB-to-micro USB Data Cable compatible with the
r520 phone, contact your Wireless Carrier.
“
Connected To PC” appears in the r520 display. The phone
displays as a removable disk on your PC.
Music Player
70
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Copy or transfer the music files to the Music directory on
the “SCH-R520” drive and/or to the Media/Music
subdirectory on the “Removable Disk”.
Adding a Playlist
To create a new playlist, do the
following:
more information, refer to
“Launching the Music Player”
4. Press the Done soft key on the phone. You are prompted to
confirm that you want to “Exit Mass Storage Mode?
”
5. Press the Yes soft key. The phone returns to Standby
mode.
2. Press the Library soft key, then
select Playlists. The Playlists
screen appears in the display.
6. Disconnect the Data Cable.
Playlists
Playing a Playlist
“Launching the Music Player”
3. If there are no playlists, press
the Add soft key. Otherwise,
press the Options soft key and
select Add New Playlist. The
Enter new name field appears.
2. Press the Library soft key, then
4. Enter a name for the new
page 35.) A list of music files
appears in the display.
select Playlists
.
3. Highlight the desired playlist
and press the Play soft key. The Music Player screen
appears in the display and a music file begins playing.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Highlight each file you want to
add to the new playlist and
press the MARK key ( ). A
check mark appears in each
selected file’s check box.
• Erase Playlist — Lets you remove this playlist from the phone.
Note: Erasing a playlist does not erase the files listed in the playlist.
Managing Files in a Playlist
more information, refer to
“Launching the Music Player”
6. When you have marked all the
files you wish to add to the
playlist, press the Done soft
key. The new playlist displays
on the Playlists screen.
2. Press the Library soft key, then
select Playlists. The Playlists
screen appears in the display.
7. To play the new playlist, press
the Play soft key.
3. Highlight the playlist whose
file list you wish to change, then press the VIEW key ( ).
The selected Playlist's file list appears in the display.
8. Press the VIEW key( ) to
view a list of the files in the
playlist.
4. To mark files for change, highlight each file and press the
MARK key ( ). A check mark appears in each selected
file’s check box.
9. For the following additional
options, press the Options soft
key:
• Add New Playlist — Lets you create a new playlist.
• Rename Playlist — Lets you change the name of this playlist.
Music Player
72
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Press the Options soft key. The following options are
available:
• Mark All/Unmark All — Marks all files in this playlist.
• Add Songs — Lets you select songs and add them to this playlist.
• Move to Another List — Lets you select move the marked files in
this list to another playlist.
• Remove From List — Lets you erase marked files from this
playlist.
• Song Info — Shows the Title, Artist, Album, Genre, File Name,
Encoding Format, Bitrate, File Size, and time and Date for a marked
or highlighted file in this playlist.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 9: Camera-Camcorder
Use your r520 phone to take full color digital pictures and videos,
display them on your phone’s vivid color display, and instantly
share them with family and friends. It’s fun, and as easy to use as
a traditional point-and-click camera or camcorder. This section
explains how you can do the following:
Note: You can also activate the camera by pressing the Menu soft key, then
select Multimedia Camera
➔
.
The camera viewfinder screen
appears in the display. (For more
•
•
•
Take pictures and videos with your phone’s built-in digital Camera-
Camcorder.
Send and receive pictures and videos taken with your phone’s
Camera-Camcorder.
2. Using the display as a viewfinder,
point the camera lens (at the top
rear of your phone’s slide) at your
subject.
Set the several options associated with the Camera-Camcorder that
help you take crisp, clear pictures and videos.
Taking Pictures and Videos
Taking pictures videos with the built-in Camera-Camcorder is as
simple as choosing a subject, pointing the lens (located on the
rear of your phone, at the top), and pressing a button.
3. When the image that you wish to capture appears in the
display, press
display.
. The photo you’ve taken appears in the
Taking Snap Shots (Single Pictures)
To take a single picture using the current camera settings, do the
following:
•
•
To discard the photo, press the Erase soft key.
To send the photo as part of a Picture message, press the Send
soft key.
1. In Standby mode, press the Camera key (
).
•
To save the picture to memory, press the Save soft key.
Camera-Camcorder
74
Download from Www.Somanuals.com. All Manuals Search And Download.
• Mosaic Shot — Lets you select one of the following photo
Tip: You can change a number of the camera’s settings to suit particular
patterns: take a mosaic of 4 or 9 photos.
–
–
2x2 — Four shots per photo.
3x3 — Nine shots per photo.
Taking Multi Shot Pictures
• Fun Frames — Lets you add a selected, colorful frame to your next
photo.
When taking pictures of moving subjects or subjects you cannot
pose, such as children and pets, the camera’s Multi Shot mode
simplifies the process of taking multiple pictures in quick
succession. After taking Multi Shot pictures, the camera
automatically displays thumbnail views of the pictures you have
just taken so you can select the best picture(s) and discard the
rest.
3. Select Series Shot or Mosaic Shot
.
4. Using the display as a viewfinder, point the camera lens at
your subject.
5. Press the
quick succession (Series Shot) or one shot each time you
press and combines multiple shots into a single photo
Mosaic Shot).
6. To save the picture(s) to memory, press the Done
key.
To discard the picture(s), press the Erase soft key.
key. The camera takes multiple photos in
1. In Standby mode, press the Camera key (
). The
camera viewfinder screen appears in the display. (For
(
/
Save soft
Note: You can also activate the camera by pressing the Menu soft key, then
select Multimedia
➔
Camera.
2. Press the Options soft key, then highlight the
icon. The
Taking Videos
following options appear in the display:
To take a video using the current Camcorder settings, do the
following:
• Single Shot — Take one photo with each press of the Camera
button.
1. In the Camera screen, press the Options soft key, then
• Series Shot — Lets you take a series of 5 photos. [The series
highlight the
icon and select Camcorder.
progress bar (
) appears in the display.)
75
Download from Www.Somanuals.com. All Manuals Search And Download.
The Camcorder viewfinder screen
appears in the display. (For more
Screen Layouts
Camera Screen
When you activate your phone’s camera, the second line of the
display is reserved for the current camera resolution setting and
the picture counter.
Note: You can also activate the Camcorder from
The center of the display shows a
viewfinder image of the subject at which
the camera is pointed.
Standby mode by pressing the Menu soft
key, then selecting Multimedia
➔
Camcorder
.
2. Using the display as a viewfinder, point the camera lens at
Camera Screen Icons
your subject.
The following icons appear in the Camera
screen when the Icon Display Camera
3. Press the Record key (
) when the image that you wish
setting is set to On
.
to capture appears in the display. Recording continues
until one of the following occurs:
Mode — Indicates whether in Camera mode (shown) or
Camcorder mode ( ).
•
•
•
You press
.
Shooting Mode — Indicates Camera shooting mode to
take a Single Shot picture (shown), multiple Series Shot
Available memory is used up (Normal setting).
15 seconds of video have been recorded (Limit for MMS setting).
(
) pictures in automatic succession, a multiple
4. Press the Save soft key to save the video to memory.
Mosaic Shot
(
) (2x2 or 3x3) picture, a single picture
in a Fun Frame
(
).
5. Press the Erase soft key to discard the video.
Size — Indicates Camera resolution setting [1280x960
(shown), 640x480
(
), 320x240
(
), 176x144
(
),
or Picture ID (
“Size” on page 79.)
Camera-Camcorder
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Night Shot — Indicates whether your phone is ready to
take photos in low light: Off (shown) or On ).
Self Timer in use — Delays the camera shutter from Off
[0 seconds (as shown)] to 3 Sec. ), 5 Sec. ), or
10 Sec. ) after you press
Quality — Indicates and sets camera’s image quality
Zoom — Enlarges the image from 1 up to x10 when
you press the Navigation key Up or Down.
(
Brightness — Brightens or darkens the image from -4
to +4 when you press the Navigation key Left or
Right.
(
(
(
.
Camcorder Screen
[
(
(
When you activate your phone’s
more information, refer to “Quality” on page 80.)
camcorder, the first line of the display is
shows current camcorder setting icons.
The center of the display shows a
viewfinder image of the subject at which
the camcorder is pointed.
White Balance — Indicates the current photo White
Balance setting [Auto (shown), Sunny
(
),
Cloudy ), Tungsten ), and Fluorescent
(
(
(
)].
Camcorder Screen Icons
Color Effect — Replaces the Normal colors with varying
shades of a selected color (Normal Black&White Sepia
Negative Green Aqua).
The following icons appear in the Camcorder screen when the
,
,
,
Icon Display Camcorder setting is set to On
Mode — Indicates whether in Camcorder mode (shown)
or Camera mode ( ).
Recording Mode — Indicates camcorder’s recording
mode setting [Limit for MMS (shown) or Normal
.
,
,
Photo Limit — Indicates the available number of
photos you can take. [Depending on the camera Size
(
)].
(You can change the recording mode setting. For more
Phone Memory — Indicates photos will be stored in the
phone’s memory.
Card Memory — Indicates photos will be stored on a
microSD Memory Card.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Self Timer in use — Delays the camcorder recording
from Off [0 seconds (as shown)] to 3 Sec. ), 5 Sec.
), or 10 Sec. ) after you press the Camera key.
Saving Pictures and Videos
After you’ve taken a picture or video, you can do any of the
following:
(
(
(
•
Save the picture or video by pressing the Save soft key.
On your phone, a picture is stored in the Picture folder. A video is
stored in the Video folder. These folders are part of the phone’s
memory and/or part of an optional Memory Card devoted to storing,
browsing, and viewing saved pictures and videos. (For more
Quality — Indicates and sets camcorder’s video quality
more information, refer to “Quality” on page 80.)
[
(
(
White Balance — Indicates the current video White
Balance setting [Auto (shown), Sunny
(
),
Cloudy ), Tungsten ), and Fluorescent
(
(
(
)].
•
•
Access the Picture Video folder by pressing the Gallery soft key.
/
Send the picture or video to someone else by pressing the Send soft
key.
Color Effect — Replaces the Normal colors with varying
shades of a selected color (Normal Black&White Sepia
Negative Green Aqua).
,
,
,
,
,
•
Discard the picture or video by pressing the Erase soft key.
Zoom — Enlarges the image from 1 up to x10 when
Camera Options
you press the Navigation key Up or Down.
Brightness — Brightens or darkens the image from -4
to +4.
The Camera Option buttons let you adjust the default camera
settings to suite available lighting, the subject of the photo, or the
purpose of the photo.
Phone Memory — Indicates videos will be stored in the
phone’s memory.
Card Memory — Indicates videos will be stored on a
microSD Memory Card.
Camera-Camcorder
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Mode
Note: When the Shooting Mode option is set to a value other than Single
,
either a Series Shot progress bar (
) or a Mosaic
Switches the Camera to Camcorder mode.
shot progress array (
or
) appears in the viewfinder screen.
ᮣ
In camera mode, press the Options soft key, then highlight
and select Camcorder. The Camcorder viewfinder
screen appears in the display.
When you press
, the camera takes several pictures in
rapid succession (Series Shot) or individual shots as fast as
you can press Mosaic Shot).
(
Shooting Mode
Size
Shooting Mode lets you select Fun Frames and/or take multiple
pictures in succession when you press the Camera key (
).
Change the size (in pixels) of your pictures using the Size setting.
1. In camera mode, press the Options soft key, then highlight
1. In camera mode, press the Options soft key, then highlight
/
/
/
. The following options are
/
/
/
/
. The following options are
available:
available:
• Single Shot — 1 picture taken when your press the Camera key
).
• 1280x960 pixels
• 640x480 pixels
• 320x240 pixels
• 176x144 pixels
• Picture ID
(
• Series Shot
—
5
new pictures taken in succession.
• Mosaic Shot
—
2x2 (4) or 3x3 (9) new shots taken in succession
and combined into a single picture in an array.
• Fun Frames — Surrounds your next picture(s) in a selected
colorful frame.
2. Select the desired option. You’re returned to the camera
2. Select the desired option and setting. The related icon
viewfinder screen.
appears in the display.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Select the desired Self Timer option. If you select 10
,
5, or
Note: The Size setting affects zoom capabilities. When Size is set to
3, the Self Timer icon appears in the camera screen in the
1280x960 pixels, zoom is not available. When Size is set to any value
lower than 1280x960 pixels, zoom settings
1
–
10 are available.
display.
Night Shot
When you press
, the countdown timer indicates the
time remaining before the camera takes the picture.
Night Shot lets you take pictures in low light conditions.
1. In camera mode, press the Options soft key, then highlight
Tip: To stop or disable the Self Timer without resetting it, press
.
/
. The following options appear in the display:
Quality
• Off
• On
You can affect how much your picture is compressed, thereby
reducing it’s overall size and clarity, not to be confused with
picture Size (resolution).
2. Select the Night Shot setting of your choice.
Self Timer
1. In camera mode, press the Options soft key, then highlight
Self Timer lets you delay taking a picture long enough to let you
join others in a picture.
/
/
. The following options appear in the
display:
1. In camera mode, press the Options soft key, then highlight
• SuperFine
• Fine
/
/
/
. The following options are
available:
• Normal
• 10 Sec.
• 5 Sec.
• 3 Sec.
• Off
2. Select the quality setting of your choice. You’re returned to
the camera viewfinder screen.
Camera-Camcorder
80
Download from Www.Somanuals.com. All Manuals Search And Download.
White Balance
Color Effects
White Balance allows you to adjust video quality according to
available light.
Change the look of your pictures with Color Effects. Choose from
six available settings such as Green, Negative, and Sepia. The
selected color effect previews in the display before you take the
picture.
1. In camera mode, press the Options soft key, then highlight
/
/
/
/
. The following options
1. In camera mode, press the Options soft key, then highlight
appear in the display:
. The following options pop-up:
• Auto — The camera automatically adjusts color balance to
available light.
Note: To disable Color Effects, choose Normal
.
• Sunny — Use this setting when taking photos in full sun.
• Normal — Subjects and pictures appear with a normal hue.
• Black&White — Subjects and pictures appear in black and white.
• Sepia — Subjects and pictures appear in a brownish-gray hue.
• Negative — Subjects and pictures appear in inverted colors.
• Green — Subjects and pictures appear in a greenish hue.
• Aqua — Subjects and pictures appear in an aqua hue.
2. Select the color effect of your choice. You’re returned to
the camera viewfinder screen.
• Cloudy — Use this setting when taking photos in cloudy
conditions.
• Tungsten — Use this setting when taking photos under
incandescent lights.
• Fluorescent — Use this setting when taking photos under
fluorescent lights.
2. Select the White Balance you wish to use. The camera
viewfinder screen appears in the display with your
selected White Balance applied.
When you take your next picture, the phone’s display
The next time you press
, the camera applies the
previews your subject image with the selected color effect.
selected White Balance to your photo.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
• Guideline — Removes the Camera display icons (if displayed) and
Camera Settings
When you change a setting, your change is retained until you
change that setting or reset all your camera settings.
displays a crosshatch pattern in the Camera viewfinder screen.
• No Icons — Removes the Camera display icons (if displayed) from
the Camera viewfinder screen.
Memory
Metering
1. In camera mode, press the Options soft key, then highlight
and select Memory. The following storage options
appear in the display:
1. In camera mode, press the Options soft key, then highlight
and select Metering. The following options appear in
the display:
• Phone Memory — Stores pictures in phone memory.
• Matrix — Adjusts exposure to the average light level over a large
• Card Memory — Stores pictures on an optional microSD Memory
Card.
picture area.
• Center-weighted — Adjusts exposure to the average light level
over a center portion of the subject.
2. Select the memory location setting of your choice. You’re
returned to the camera viewfinder screen.
• Spot — Adjusts exposure to the light level over a small portion of
the subject.
Icon Display
2. Select the Metering setting of your choice. You’re returned
View Mode lets you quickly add or remove elements of the
Camera viewfinder screen.
to the camera viewfinder screen.
When you take your next picture, the phone’s display
1. In camera mode, press the Options soft key, then highlight
and select Icon Display. The following options appear
in the display:
previews your subject image with the measured exposure.
View Mode
1. In camera mode, press the Options soft key, highlight
, then select View Mode. The following values appear
in the display:
• Display All — All Camera display icons appear in the Camera
viewfinder screen.
Camera-Camcorder
82
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Landscape — Shows a wider, more panoramic view of the
Auto Save
subject.
1. In camera mode, press the Options soft key, then highlight
and select Auto Save. The following options appear in
the display:
Portrait — Shows a narrower, more vertically-oriented view of the
subject.
2. Select the View Mode setting of your choice. You’re
returned to the camera viewfinder screen, which now
shows the selected view.
• Off
• On
2. Select the automatic save setting of your choice. You’re
returned to the camera viewfinder screen.
Shutter Sound
Choose from four different sounds whenever you take a picture.
Aside from being a cool sound effect, Shutter Sounds act as an
audible reminder that your camera has taken a picture.
Reset Settings
This option lets you reset the Camera’s settings to their factory
default values.
1. In camera mode, press the Options soft key, then highlight
and select Shutter Sound. The following shutter
sounds appear in the display:
ᮣ
In camera mode, press the Options soft key, then highlight
and select Reset Settings. You are prompted to
confirm the reset.
• Off
• Shutter1
•
•
To reset the Camera settings, select Yes
.
• Shutter2
To keep the current Camera settings, select No
.
• Shutter3
Camcorder Options
The Camcorder Options let you adjust the default camcorder
settings to suite available lighting, the subject of the video, or the
purpose of the video.
2. Select the shutter sound setting of your choice. You’re
returned to the camera viewfinder screen.
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Mode
• 10 Sec.
• 5 Sec.
Switches the Camcorder to Camera mode.
• 3 Sec.
ᮣ
In camcorder mode, press the Options soft key, then
highlight and select Camera. The Camera viewfinder
screen appears in the display.
• Off
2. Select the desired Self Timer option. If you select 10 5, or
,
3
, the Self Timer icon appears in the camcorder screen in
Recording Mode
1. In camcorder mode, press the Options soft key, then
the display.
When you press
, the countdown timer indicates the
highlight
display:
/
. The following options appear in the
time remaining before the camcorder records the video.
• Limit for MMS — Record videos that are a maximum of 15
seconds long. The videos can be included in video messages.
Tip: To stop or disable the Self Timer without resetting it, press
.
Quality
• Normal — Record videos that are any length up, depending on
available memory.
You can affect how much your video is compressed, thereby
reducing it’s overall file size and clarity.
2. Select the desired recording mode setting. You are
returned to the camcorder viewfinder screen.
1. In camera mode, press the Options soft key, then highlight
/
/
. The following options appear in the
Self Timer
display:
Self Timer lets you delay recording a video long enough to let you
join others in the video.
• SuperFine
• Fine
1. In camera mode, press the Options soft key, then highlight
• Normal
/
/
/
. The following options are
available:
Camera-Camcorder
84
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Select the quality setting of your choice. You’re returned to
Color Effects
the camcorder viewfinder screen.
Change the look of your videos with Color Effects. Choose from
six available settings such as Green, Negative, and Sepia. The
selected color effect previews in the display before you take the
picture.
White Balance
White Balance allows you to adjust video quality according to
available light.
1. In camcorder mode, press the Options soft key, then
1. In camcorder mode, press the Options soft key, then
highlight
. The following options appear in the display:
highlight
/
/
/
/
. The following
Note: To disable Color Effects, choose Normal
.
options appear in the display:
• Auto — The Camcorder automatically adjusts color balance to
• Normal — Subjects and videos appear with a normal hue.
• Black&White — Subjects and videos appear in black and white.
• Sepia — Subjects and videos appear in a brownish-gray hue.
• Negative — Subjects and videos appear in inverted colors.
• Green — Subjects and videos appear in a greenish hue.
• Aqua — Subjects and videos appear in an aqua hue.
2. Select the color effect of your choice. You’re returned to
the camcorder viewfinder screen.
available light.
• Sunny — Use this setting when recording videos in full sun.
• Cloudy — Use this setting when recording videos in cloudy
conditions.
• Tungsten — Use this setting when recording videos under
incandescent lights.
• Fluorescent — Use this setting when recording videos under
fluorescent lights.
2. Select the White Balance you wish to use. The camera
viewfinder screen appears in the display with your
selected White Balance applied.
When you record your next video, the phone’s display
previews your subject image with the selected color effect.
The next time you press
, the camera applies the
selected White Balance to your photo.
85
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Select the desired Icon Display setting. You’re returned to
Camcorder Settings
the camcorder viewfinder screen.
Memory
1. In camcorder mode, press the Options soft key, then
Start Sound
highlight (
) and select Memory. The following storage
Choose from two different sounds whenever you begin video
recording. Aside from being a cool sound effect, Start Sound acts
as an audible reminder that your camcorder has begun recording
a video.
options appear in the display:
• Phone Memory — Stores videos in phone memory.
• Card Memory — Stores videos on an optional microSD Memory
Card.
1. In camcorder mode, press the Options soft key, then
highlight (
) and select Start Sound. The following Start
2. Select the memory location setting of your choice. You’re
Sound options appear in the display:
returned to the Camcorder viewfinder screen.
• Off
Icon Display
• Beep
View Mode lets you quickly add or remove elements of the
Camera viewfinder screen.
2. Select the desired start sound. You’re returned to the
camcorder viewfinder screen.
1. In camcorder mode, press the Options soft key, then
highlight (
) and select Icon Display. The following
End Sound
options appear in the display:
Choose from two different sounds whenever you stop video
recording. Aside from being a cool sound effect, End Sound acts
as an audible reminder that your camcorder has stopped
recording a video.
• Display All — All Camcorder display icons appear in the
Camcorder viewfinder screen.
• No Icons — Removes the Camcorder display icons (if displayed)
from the Camcorder viewfinder screen.
Camera-Camcorder
86
Download from Www.Somanuals.com. All Manuals Search And Download.
1. In camcorder mode, press the Options soft key, then
highlight ( ) and select End Sound. The following End
ᮣ
In camcorder mode, press the Options soft key, then
highlight ( ) and select Reset Settings. You are
prompted to confirm the reset.
Sound options appear in the display:
• Off
•
•
To reset the Camcorder settings, select Yes
.
• Beep
To keep the current Camcorder settings, select No
.
2. Select the desired end sound. You’re returned to the
camcorder viewfinder screen.
Camera-Camcorder Adjustments
Zoom
Auto Save
Zoom lets you temporarily enlarge the pictures you take or videos
you record. Increasing the Zoom (2 – 10) enlarges your pictures
or videos (1 is normal).
1. In camcorder mode, press the Options soft key, then
highlight ( ) and select Auto Save. The following options
appear in the display:
Note: Zoom is not available to the Camera if the Size Camera option is set to
1280x960
.
• Off
• On
ᮣ
In camera or camcorder viewfinder screen, press the
Navigation key Up and Down to adjust the Zoom. The
Zoom adjustment appears in the display, and the screen
image enlarges to show the affects of your changes.
2. Select the automatic save setting of your choice. You’re
returned to the camcorder viewfinder screen.
Reset Settings
This option lets you reset the Camcorder’s settings to their
factory default values.
The next time you press
, the Camera takes an
enlarged picture or the Camcorder records an enlarged
video, according to your selected Zoom setting.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Brightness
Tip: You can also access the Photo Gallery from:
Brightness lets you temporarily lighten the pictures you take or
videos you record. Increasing the Brightness (-4 – +4) lightens
your pictures or videos (0 is normal).
– The Multimedia menu, by selecting Picture
.
– The Edit Contact screen by selecting the picture ID field and pressing
the Set soft key.
1. In camera mode, press the Navigation key Left or Right.
– The Create Pic Msg screen by highlighting the Picture field and
pressing the Picture soft key.
The Brightness adjustment appears in the display.
2. To return to the Camera and take new pictures, press the
2. To brighten your next picture(s), press the Navigation key
Up. To darken your next picture(s), press the Navigation
key Down. (The screen image lightens or darkens to show
the affects of your changes).
Camera soft key.
3. To view a picture, press the VIEW soft key.
4. For more options, press the Options soft key. The following
additional options pop-up:
The next time you press
, the camera takes a lighter or
• Send — Send the currently highlighted or displayed image as part
darker picture or records a lighter or darker video
according to your selected Brightness setting.
of a Picture message.
• Set As — Assign the currently highlighted or displayed image as
the Main Wallpaper or as the Picture ID for a Contact.
The Photo Gallery
Saved pictures are stored in the Picture folder. You can browse
the pictures one at a time (expanded mode), or view several
pictures at once in thumbnail format.
• Erase Images — Delete one or more marked images from the
Picture folder.
• Move — Relocate the highlighted picture from phone memory to a
Memory Card or from a Memory Card to phone memory.
1. In the Camera viewfinder screen, press the Gallery soft
key. Any pictures that you’ve saved are listed with their
thumbnail images in the display.
• Copy — Copy the highlighted picture from phone memory to a
Memory Card or from a Memory Card to phone memory.
Camera-Camcorder
88
Download from Www.Somanuals.com. All Manuals Search And Download.
• View by Location — Select whether you want to view All images
stored on your phone, only images stored in Phone Memory, or only
images stored in Card Memory.
Tip: You can also access the Video Gallery from:
– The Multimedia menu, by selecting Video
.
• Rename — Change the name of the picture file.
– The Create Video Msg screen by highlighting the Video field and
pressing the Videos soft key.
• Lock/Unlock — Prevent/allow erasure of the currently highlighted
or displayed image.
2. To launch the Camcorder and record a video, press the
• Slide Show — View the images in your Gallery as an automatically
changing series.
Video soft key.
• Image Info — View the Name, Date and Time created, Resolution,
3. To launch the Video Player and
view a video, highlight the video
and press the PLAY soft key.
and Size of the currently highlighted or displayed image.
5. Select the desired option to perform its function or to enter
its sub-menu.
The following controls are available
The Video Gallery
Saved videos are stored in the Video folder. You can browse the
videos one at a time (expanded mode), or view several videos at
once in thumbnail format.
•
•
•
•
•
To pause/resume playing a video, press
.
To stop playing a video, press the Down
navigation key.
1. In the Camcorder viewfinder screen, press the Gallery soft
key. Any videos that you’ve saved are listed with their
thumbnail images in the display.
To skip play to an earlier video in the Video folder, press the Left
navigation key.
To skip play to a later video in the Video folder, press the Right
navigation key.
To return to the Video folder and choose another video file to play,
press the Up navigation key.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
4. To access video options, press the Options soft key. The
Point, Click, and Send Pictures and Videos
following options pop-up:
Take a picture or record a video and send it to anyone with a
compatible device in a few easy steps.
• Send — Lets you send the highlighted video as part of a video
message.
Note: To record and send a video while in Camcorder mode, set Shooting
• Set As Main Wallpaper — Assign the currently highlighted video
as the Wallpaper image played in background on the Standby
mode screen.
Mode to Limit for MMS
(
).
1. In Standby mode, press the Camera key (
). The
• EraseVideos — Delete one or more marked videos from the Video
folder.
camera viewfinder screen appears in the display.
To record a video, in camera mode, press the Camera key
• Move — Relocate the highlighted video from phone memory to a
Memory Card or from a Memory Card to phone memory.
(
). The Camcorder viewfinder screen appears in the
• Copy — Copy the highlighted video from phone memory to a
Memory Card or from a Memory Card to phone memory.
display.
2. Using the display as a viewfinder, take the desired picture
• View by Location — Select whether you want to view All videos
stored on your phone, only videos stored in Phone Memory, or only
videos stored in Card Memory.
or begin record the desired video by pressing
video recording, press again.
. To stop
• Rename — Rename the highlighted video.
The photo/video review screen appears in the display.
• Lock/Unlock — Prevent/allow erasure of the currently highlighted
or displayed video.
3. To send a Picture message, press the Send soft key. The
• Video Info — View the Name, Date and Time created, Resolution,
and Size of the currently highlighted video.
Create Pic Msg screen appears in the display.
5. Select the desired option to perform its function or to enter
its sub-menu.
Camera-Camcorder
90
Download from Www.Somanuals.com. All Manuals Search And Download.
To send a Video message:
•
•
•
Press the Save soft key. You are returned to the Camcorder
viewfinder screen.
Press the Gallery soft key. Thumbnail views of your videos appear
in the display with the newest video highlighted.
Press the Options soft key, then select Send
➔
Video Message.
The Create Video Msg screen appears in the display.
4. Enter the recipient’s phone number or e-mail address
using the keypad.
5. Press the OK soft key to save the address(es).
7. When you are finished composing your message, press
SEND soft key to send the Picture or Video message to the
intended recipient(s).
91
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 10: Multimedia
This section outlines your phone’s multimedia functions and key
features associated with multimedia.
• Music Player — Lets you play music files (such as, CMX, MIDI,
MP3,AAC, AAC+, and eAAC+) stored on an optional microSD
page 67.)
Accessing Multimedia
1. In Standby mode, press Menu
(
), then select
Note: Either the external microSD Memory Card or the phone memory can be
Multimedia. The following sub-menus appear in the
used for the Music Player.
display:
• Ringtone — Lets you assign ringtones for Ringtone (calls), Contact
Tip: To launch the Multimedia menu using a voice command — In Standby
ID, and Alert Tone.
mode, press and hold
until the phone prompts, “Say a command.”
2. Select the desired sub-menu. The following sections
Say “Go to Multimedia” into the microphone.
describe the above listed sub-menus in greater detail.
Ringtone
Ringtone lets you assign ringtones (preloaded and downloaded)
for Ringtone, Contact Id, and as Alert Tone.
• Camcorder— Lets you launch and set up the phone’s camcorder.
1. At the Multimedia menu, select Ringtone. Record New and
• Picture— Lets you choose the pictures that display on the phone’s
screen or in Picture messages. (For more information, refer to
a list of ringtones appear in the display.
• Video — Lets you play video files stored in your phone or on an
optional microSD Memory Card and lets you select videos to appear
on the phone’s Standby screen or in Video messages. (For more
Multimedia
92
Download from Www.Somanuals.com. All Manuals Search And Download.
4. To access additional options, press the Options soft key
Tip: You can also access Ringtone from:
and the following options appear in the display:
–A Set Alarm screen by selecting the Ringer option, highlighting the
• Lock Unlock — recorded audio files — Blocks / permits erasure
/
second (file name) field, pressing the Left or Right navigation key, and
selecting Ringtone
.
of the highlighted file.
•
Erase — Deletes the highlighted unlocked file. You are prompted
to confirm the erasure.
–The Edit Contact screen by selecting the Ringtone field, pressing the
Set soft key, and selecting Ringtone
.
•
•
Rename — Lets you rename the highlighted file.
Ringtone Info — Displays information about the highlighted file,
such as the file name, the file type, and the data size.
2. To record a voice memo, select Record New, then press
REC
(
• Send Via Bluetooth — Lets you send the highlighted file over to
another Bluetooth device. (For more information, refer to
more information.)
3. To assign or review your music, recorded sound, and
• Send Pic Msg — Lets you send the highlighted file to a specified
recipient in a Picture message.
ringtone files, highlight a particular file, then:
• Move/Copy to memory card / phone — Lets you move or copy
the highlighted file between phone memory and an optional
•
•
To play the highlighted file, press PLAY
(
).
To assign the highlighted file, Press the Set As soft key. The
following options appear in the display:
–
–
–
Ringtone — Lets you assign the selected ringtone to incoming voice
calls.
Record New Voice Memo
You can use the phone to record voice memos for later playback.
You can also record the caller on the other end of the line during
a phone conversation.
Contact ID — Lets you assign the selected ringtone as the distinctive
ringer for a Contact.
Alert Tone — Lets you assign the selected ringtone to All Msg
,
Text
Msg Picture Msg, or Voicemail Msg
,
.
93
Download from Www.Somanuals.com. All Manuals Search And Download.
Note: There is limited space for the length of recordings. The maximum
length for a single voice memo is 60 seconds.
Record a Voice Memo
1. At the Multimedia menu, select Ringtone ➔ Record New.
The Record New screen appears in the display.
2. Press REC
(
), then start speaking. As it is recording the
phone displays a countdown timer that shows the seconds
remaining for the recording.
•
To pause the memo, press the Pause soft key. When a memo is
paused, select Resume to continue recording.
3. Press
once you’re finished recording. The new
recording is automatically saved.
Multimedia
94
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 11: Calendar
–
–
–
–
Go to Date — Lets you jump to any date you specify.
Go to Today — Lets you jump to today’s date.
Erase Old — Lets you erase past events.
Erase All — Lets you erase all events.
Calendar lets you view the current, past, or future month in a
monthly calendar layout. While viewing the calendar, the current
date is highlighted and days with scheduled events are
surrounded by a box.
View an event
Select the desired option to perform the related process.
1. In Standby mode, press Menu ( ),
3. Open the highlighted date by pressing
. A list of
then select Calendar.
scheduled events appears in the display.
A calendar appears in the display
with the current date highlighted.
The month and year also appear.
4. Select the desired event. Information for the selected event
appears in the display.
Add a New Event
2. Use the following keys to navigate the calendar and
1. In Standby mode, press Menu ( ),
highlight a desired date.
then select Calendar.
•
To move from one day to another, use the Left/Right navigation
keys.
A calendar appears in the display
with the current date highlighted.
The month and year also appear.
•
To move from one week to another, press the Navigation key Up/
Down.
2. Highlight the date of the new event.
•
•
•
To view previous months, press the Volume key Up.
To view future months, press the Volume key Down.
To access other options, press the Options soft key while viewing
the calendar. The following options appear in the display:
3. Press the Add soft key. The New Event screen appears in
the display.
95
Download from Www.Somanuals.com. All Manuals Search And Download.
4. To select and enter details of the event, use the Navigation
key and the keypad. (For more information, refer to
10. Press
To store the event in the calendar. An alert
notifies you prior to the event, if you selected a notification
alert.
5. Enter the Start and End dates and times for the event using
the keypad. Enter the dates and times for the event using 2
digits for day, month, hour, and minute entries. Use 4 digits
for year entries.
6. To change between AM and PM, use the Left and Right
navigation keys.
7. When you’re finished entering the dates and times, to
highlight the Alert field, use the Up and Down navigation
keys. To select a type of alert, use the Left and Right
navigation keys.
8. Highlight the Reminder field, and set the Reminder to Off
or to select a reminder interval using the Left and Right
navigation keys.
9. Highlight the Alert time field, use the Up and Down
navigation keys, then use the Left or Right navigation keys
to select the amount of time (before the event) that you
want to receive notification.
Calendar
96
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 12: Bluetooth
Bluetooth is a short-range wireless communications technology
capable of exchanging information over a distance of about 30
feet without requiring a physical connection.
Accessing Bluetooth
1. In Standby mode, press Menu ( ), then select
Bluetooth. The following sub-menus appear in the
display:
With Bluetooth, you don't need to line up the devices to beam
information. If the devices are within a range of one another, you
can exchange information between them, even if they are located
in different rooms.
• Add New Device
• Registered List
• Bluetooth Settings
The Bluetooth wireless technology settings menu provides the
ability to view and change the device name, show the visibility,
and set the security for the device.
2. Select the desired Bluetooth sub-menu.
Add New Device
To search for available Bluetooth devices:
Turn Bluetooth On/Off
When the Bluetooth is turned on, you can use the Bluetooth
features available. When the Bluetooth is turned off, you cannot
send or receive information via Bluetooth. To save battery life or
in situations where Bluetooth use is prohibited, such as airline
traveling, you can turn off the Bluetooth wireless technology
1. At the Bluetooth menu, select Add New Device.
If Bluetooth is off, you are prompted to “Turn Bluetooth
on?”.
•
•
To turn Bluetooth on, press the Yes soft key.
To leave Bluetooth off, press the No soft key.
“
Place device you are connecting to in discoverable mode
”
appears in the display.
97
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Place the Bluetooth device in discoverable mode. (For
showing a list of devices previously connected to your
device.
more information, refer to the device user manual.)
3. Press
display.
4. Highlight the device you want to pair with your phone.
5. Press PAIR ) to pair the selected device with the
. Names of the available devices appears in the
Connecting to a Registered Bluetooth Device
From the Registered List,
ᮣ
Select the desired device.
(
Note: If you are unable to pair with the device a pop-up appears in the
display. To retry, press the Yes soft key.
phone. You are prompted to enter the passkey or PIN for
the selected device. (For more information, refer to the
device user manual.)
Bluetooth Settings
1. At the Bluetooth menu, select Bluetooth Settings. The
6. Enter the device passkey or PIN and press
.
following options appear in the display:
• Enable Disable — Turns Bluetooth on or off.
/
Note: If you are pairing and connecting to another phone or to a personal
computer, both devices prompt for a passkey or PIN. To successfully
pair and connect your phone with the other device, the same passkey
or PIN must be entered on both devices.
• Discovery Mode — Lets other devices “see” (access) your device.
Select On for other devices to see your device, or Off for no visibility.
• Device Name — Shows the handset name. You may change this
Registered List
name. Enter text changes and press
to save them.
• Supported Profiles — Lists and explains the Bluetooth profiles
Registered List provides a list of Bluetooth
wireless technology devices previously
connected to your handset.
supported by the phone.
• Device Info — Shows the Bluetooth Type, Status, and Address of
your phone.
ᮣ
At the Bluetooth menu, select
Registered List. The Bluetooth
screen appears in the display
2. Select the desired option to perform the related process.
Bluetooth
98
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 13: Browser
This section outlines how to launch the Browser, how to navigate
to other pages on the web, and how the keys on the keypad are
used with the web application. Links to other sites are briefly
discussed.
2. Use the Navigation keys to browse the categories.
3. Once the desired category is highlighted, press to enter the
category list.
Exit the Web
Browser Indicator
ᮣ
To exit the Browser, press
.
With the Browser, you can conveniently surf the web and
download ringtones and wallpapers using your phone. Each time
you launch the Browser, your phone connects to the Internet and
Using Browser
When you use the Browser, some of the keys operate differently
than during a normal phone call. The Browser presents onscreen
items in any of the following ways:
the service indicator icon (
) appears in the display.
Stored Web Content
The Browser ends an Internet connection after a certain period of
inactivity, however some information from your session remains
stored in the phone (if you leave your phone turned on). You can
access this information without reconnecting to the Internet.
However, if you are viewing stored information, and you select a
link to a site that was not accessed in your last session, you
automatically re-connect to the Internet.
•
•
•
•
Text or numeric input.
Links (embedded in content).
Numbered options (some may not be numbered).
Simple text.
You can act upon options or links by using the soft keys.
Browser soft keys
Launching the Browser
1. In standby mode, select Menu
At the bottom of the Browser screen is a bar that contains
browser commands. The Left and Right soft keys are used to
execute the browser commands that appear in their respective
>
Browser
>
Browser.
A list of categories (each representing one or more web
sites) appears in the display.
99
Download from Www.Somanuals.com. All Manuals Search And Download.
corners of the display. These are called “soft keys” because their
function changes depending on the application.
Pound/Space Key — Press to insert a space when
entering text.
Using Links
Number 1 thru 9 — Use the number keys to select
items in a menu if they are numbered.
Links have several purposes, such as jumping to a different
page, to a different site, or even initiating a phone call. Links are
shown inside of brackets ([ ]). You can normally use the Left soft
key () to select a link when it is highlighted.
End Key — Press to exit the Browser and return the
phone to standby mode.
How Browser Keys Work
The following table lists Browser keys and their functions.
Left Soft Key — Press to activate the command that
appears above it in the display.
Navigation key — Use to browse lists and options.
Right Soft Key — Press to activate the command that
appears above it in the display.
BACK Key — A browse, back-up key. Press once to
back up one page. Press and hold to go back to home
page. Press to clear the last number, letter, or symbol
entered. Press and hold to completely clear the text
display.
Shift Key — Press before entering text to enable.
Number 1 thru 0 — Use the number keys to select
items in a menu if they are numbered.
Browser
100
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 14: Brew
The Brew application allows you to download full featured
applications over the air including games, personalized ring
tones, pictures, and more. You can send and receive instant
messages and email, or browse the web to catch up on all the
latest news.
Press the Options soft key to select the following options:
•
•
•
•
Home
—
Returns to the main Brew menu from the Brew catalog.
Saved items — Allows you to navigate to a saved site.
Recently viewed — Allows you to view a list of recently viewed items.
Search — Allows you to enter an item to search.
For more information, contact your Wireless Carrier.
Note: Please check with your Wireless Carrier for availability of applications.
Launching Brew
1. In standby mode, press Menu
>
Brew
>
Brew.
The Brew menu displays on the screen as shown.
Applications Shopping and Downloading (Brew)
Download games, ring tones, e-mail, and more using Mobile
Shop.
Note: For information on airtime charges, contact your Wireless Carrier.
ᮣ
At the Brew menu, highlight the Brew catalog, then
press
and follow the instructions in your phone’s
display.
101
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 15: Tools
This section explains how to use the phone’s digital assistant
tools to schedule events, set reminders, perform calculations,
and more.
•
•
Converter — Lets you convert currencies (according to the latest
rates) and weights, measures, and temperatures from one system
or increment to another.
Tip Calculator — Lets you quickly calculate service gratuities with
a minimum of key presses.
Tools Menu
Tools is a suite of Personal Information Manager (PIM)
applications such as a Calendar, and Memo Pad that run on the
phone. You can use the phone to schedule events, set reminders,
perform calculations, and more with the functions provided by
this useful feature.
Tip: To launch the Tools menu using a voice command — In Standby mode,
press and hold
until the phone prompts, “Say a command.” Say “Go
to Tools” into the microphone.
2. Select the desired Tool sub-menu.
Opening Tools Menu
1. In Standby mode, press Menu ( ), then select Tools.
The following sub-menus appear in the display:
The following sections provide detailed descriptions of the
Tools and how to use their functions.
Voice Service
•
•
•
Voice SVC — Lets you access voice recognition functions.
VoiceSignal is state-of-the-art voice recognition software for the
mobile phone that lets you dial numbers, lookup contact
information, and open applications using your voice. To access
voice settings, do the following:
Memo Pad — Lets you store and review useful information.
Alarm Clock — Lets you set an alarm to go off once, or daily, at a
specified time.
•
•
•
World Time — Lets you view the current time of day or night in
another part of the world.
Calculator — Lets you perform calculations, including addition,
subtraction, multiplication, and division.
Stop Watch — Lets you view the amount of time.
Tools
102
Download from Www.Somanuals.com. All Manuals Search And Download.
Lookup — Lets you look up and display contact information for any
name stored in the Contacts list by saying the name. (For more
Go to — Lets you access all of the Main Menus on the phone.
Check — Lets you check the phone's status (that is, network
coverage, signal strength, and battery in the same report), network
coverage, signal strength, battery, and phone number.
1. At the Tools menu, select Voice SVC.
The following options appear in the display:
–
–
–
•
Voice Commands — Lets you place calls, access the Contacts
List, review appointments, and more by speaking commands into
•
Voice Settings — Lets you adjust VoiceSignal settings.
2. Select the desired sub-menu.
Voice Commands
To start VoiceSignal, do one of the following:
–
–
•
In Standby mode, press and hold
Say a Command” appears in the display and is pronounced through
the earpiece, followed by a list of available commands.
At the Tools menu, select Voice SVC ➔ Voice Commands
.
“
•
.
Note: Speaking clearly, say the command that you want to use.
Note: You can set the phone to start VoiceSignal when you open the phone.
If, after a few seconds, the device has not recognized a command, it
prompts you to repeat the command.
VoiceSignal includes the following commands:
If, after a few more seconds, it still has not recognized a command, it
tells you “Sorry, no match found,” and cancels voice recognition.
–
Call — Lets you dial the phone by saying any name stored in the
contact list, without ever having to record, or “train” that name.
VoiceSignal automatically voice-activates all the contacts, even if you
have hundreds of them stored on the phone. You can also dial any
telephone number, even if it is not stored in the contact list, by saying
Voice Command Tips:
Make sure you wait for the beep before speaking.
•
•
Speak clearly at a normal volume, as if you were talking on the phone.
103
Download from Www.Somanuals.com. All Manuals Search And Download.
Voice-Activating Your Contacts List
To change the way VoiceSignal uses choice lists:
ᮣ
At the Voice SVC sub-menu, select Voice Settings ➔
When you first start VoiceSignal, it reads your Contacts list and
voice-activates all the names stored there. When you have add or
change contacts, VoiceSignal automatically reloads and voice-
activates the entire list.
Choice Lists the following options appear in the display:
•
•
•
Automatic—VoiceSignal displays a choice list only when it is not
sure if it has correctly recognized the name or number.
Ending Calls Before Restarting the VoiceSignal Software
Always On—VoiceSignal always displays a choice list, even when
there is only one choice.
When you use VoiceSignal to make a call, you must end that call
before you can use VoiceSignal again.
Always Off—VoiceSignal never displays a choice list.
Select the preferred Choice List behavior.
Voice Settings
Sensitivity
Choice Lists
1. At the Voice SVC sub-menu, select Voice Settings ➔
VoiceSignal uses choice lists when it is not confident it has
correctly recognized a name or number. In this case, it can
display a list of up to three possible choices, and prompt you to
confirm the correct one.
Sensitivity. The Sensitivity screen appears in the display.
2. Use the Navigation key to adjust the selected Sensitivity
setting toward Reject More spoken commands or names
or toward Reject Less spoken commands or names.
You can change the way that VoiceSignal uses choice lists with
name dialing, digit dialing, and contacts. For each feature, you
can choose to always see a choice list (even if there is only one
choice), or never see a choice list (even if there are multiple
choices). If you leave the setting at “Automatic,” VoiceSignal
displays a choice list only when it is not confident it has correctly
recognized the name or number.
3. To accept the new setting, press
.
Digit Dialing
If VoiceSignal regularly does not recognize the numbers you say,
try adapting digit dialing to your voice. Adapting can improve the
accuracy of digit recognition, especially for people with strong
regional accents.
Tools
104
Download from Www.Somanuals.com. All Manuals Search And Download.
Your phone displays the first digit sequence and “Please
say” plays through the speaker followed by the four digits
that appear in the display.
Note: After you adapt Digit Dial, the phone is customized to your voice, and
your voice only. Others are not be able to use the Digit Dialing feature
unless they reset the Digit Dialing to factory defaults. (For more
information, refer to “Reset Digits” on page 106..)
2. Wait for the beep and say the digits using your normal tone
Adaptation involves recording several sequences of four digits
each. The recording process takes about a minute.
of voice. After a moment, the phone plays back the
recording and prompts “Did the recording sound ok?
”
Tips for Adapting Digit Dialing
•
•
If the recording was good, say “Yes.”
•
•
•
•
Use Adapt Digits in a quiet place.
If you need to re-record, say “No.”
Make sure you wait for the beep before starting to speak.
Speak clearly, and say each digit distinctly.
If you say “No,” the phone prompts you to pronounce the
digits again. Wait for the beep and then say the digits.
If you make a mistake while recording a sequence of digits, or if there
is an unexpected noise that spoils the recording, re-record that
sequence.
Repeat this step until you’re satisfied with the recording.
3. After confirming that the recording sounds “ok”, continue
•
Only adapt digits if you are regularly having problems with digit dialing.
Once you adapt, digit dialing does not work as well for other people
using the phone. (You can always reset digit adaptation to its original
state, as described below.)
the recording process with the next set of digits.
4. After six sets of digits, the phone asks whether you want to
do more adaptation. Answer “Yes.”
Adapt Digits
5. Repeat steps 4 and 5 for another six sets of digits. After
the second group of six sets of digits, “Adaptation
complete” plays through the speaker and you are returned
to the Adapt Digits menu.
To adapt digit dialing, do the following:
1. At the Voice SVC sub-menu, select Voice Settings ➔
Digit Dialing ➔ Adapt Digits.
105
Download from Www.Somanuals.com. All Manuals Search And Download.
Reset Digits
1. At the Voice SVC sub-menu, select Voice Settings ➔
Voice Launch. The following options appear in the display:
To reset digit dialing to factory default settings, do the following:
1. At the Voice SVC sub-menu, select Voice Settings ➔
Digit Dialing ➔ Reset Digits.
•
Key Only — Press and hold
call.
to activate VoiceSignal for one
•
Key/Ear Mic — Attach a headset to the phone. Press and hold
to activate VoiceSignal. Now, you can make and end calls
using VoiceSignal by pushing the button on the headset.
The phone prompts you to confirm digit reset.
2. Press the OK soft key to reset the digit adaptation. Press
• Key/Slide — Press the
repeated calls. Open and close the slide to make and end calls
using VoiceSignal. Press to release VoiceSignal.
key to activate VoiceSignal for
the Back soft key to cancel.
Sound
2. Select the Voice Launch option you want.
Sound lets you specify what (if any) text prompts you want the
phone to read to you through the earpiece.
About VoiceSignal
1. At the Voice SVC sub-menu, select Voice Settings ➔
This option causes the About VoiceSignal screen to appear in
the display, showing version and build information about the
VoiceSignal software included on the phone.
Sound. The following options appear in the display:
•
•
•
•
Prompts — Enables (On) or disables (Off) playing of prompts.
Digits — Enables (On) or disables (Off) playing of digits.
Names — Enables (On) or disables (Off) playing of names.
1. At the Voice SVC sub-menu, select Voice Settings ➔
About.
Name Settings — Lets you adjust the speed and volume of the
phone’s audio name playback.
The About Nuance screen appears in the display showing
the version level of the VoiceSignal software currently
installed on the phone.
2. Select the desired option and setting.
Voice Launch
To set the key or action that launches VoiceSignal, do the
following:
Tools
106
Download from Www.Somanuals.com. All Manuals Search And Download.
Enter text changes using the keypad. (For more
Memo Pad
You can create a notes and store them in Memo Pad. You can’t
prioritize or set an alert for stored notes. Return to Memo Pad
anytime you wish to review and edit your notes.
5. To erase the memo you are viewing, press the Options soft
key, then select Erase. You are prompted to verify the
erasure.
Add a Memo
1. At the Tools menu, select Memo Pad. If you have any
stored memos, they appear as a list in the display. If this is
the first time to access the Memo Pad, “No memos”
appears in the display.
•
•
To erase the memo, press the Yes soft key.
To keep the memo, press the No soft key.
Alarm Clock
Your phone has an alarm clock that can be set to go off once, or
daily at a specified time. Once set, the alarm clock is easy to
change or turn off completely.
2. To add a new memo, press the Add soft key.
Note: The alarm doesn’t function when the phone is turned off. If the time for
an alarm that was set for Once has elapsed and the phone is off, the
alarm occurs at the same time on the following day.
4. When you’re finished entering memo text, press
to
save the memo.
1. At the Tools menu, select Alarm Clock. The following
View, Edit, and Erase Memos
1. At the Tools menu, select Memo Pad. A list of stored
memos appears in the display.
options appear in the display:
•
•
•
Alarm 1
Alarm 2
Alarm 3
2. Highlight the desired memo.
3. To view the memo, press VIEW ( ).
4. To edit the memo you are viewing, press the Edit soft key.
107
Download from Www.Somanuals.com. All Manuals Search And Download.
2. Select an Alarm. A Set Alarm screen appears in the display
•
•
•
•
If the alarm was set as a Daily alarm, the alarm icon remains in the
top of the display.
containing the following options:
If the alarm was set as a Mon.-Fri., the alarm icon remains in the
top of the display.
•
•
•
•
Alarm
Time
If the alarm was set as a Weekends only alarm, the alarm icon
remains in the top of the display.
Frequency
Ringer
If the alarm was set as a Once only alarm, the alarm icon
disappears from the top of the display.
3. Highlight the options you wish to change, then select
values for the options using the Left and Right navigation
keys.
Turn Off the Alarm
Turning off an Alarm stops it from sounding when the set time is
reached while retaining the Alarm settings for reuse.
To enter the Time for the alarm, use the keypad.
1. At the Tools menu, select Alarm Clock.
4. When you’re finished entering and selecting values for the
2. Highlight Alarm 1 / Alarm 2 / Alarm 3.
alarm, press
. The alarm is set and the alarm icon
3. Press the Options soft key and select Off. The highlighted
Alarm is turned off, but the alarm settings are retained for
later reuse.
(
) appears in the top of the display.
When an Alarm Sounds
An animated alarm clock appears in the display with the options
Snooze or Dismiss, and an alert sounds when the specified time
for the alarm arrives.
Reset the Alarm
Resetting one or all Alarms erases all of the Alarm settings and
restores the default settings.
ᮣ
To silence the alarm, use the Navigation key to select
1. At the Tools menu, select Alarm Clock.
Dismiss.
2. If desired, highlight Alarm 1 / Alarm 2 / Alarm 3.
Tools
108
Download from Www.Somanuals.com. All Manuals Search And Download.
3. Press the Options soft key. Select from the following
The following time zones/cities are supported:
options:
EST/EDT:
Miami
New York
Mid Atlantic
La Paz
Caracas
Newfoundland
Buenos Aires
Brasilia
• On Off — Enables or disables the highlighted Alarm, using
/
current settings.
Cape Verde
Lisbon
London
Paris
Rome
Berlin
• Reset Alarm — Resets the highlighted Alarm to default settings.
• Reset All — Resets all Alarms to default settings.
World Time
Athens
Helsinki
Istanbul
Kabul
Nairobi
Moscow
Jidda
Tehran
Abu Dhabi
World Time lets you view the time of day or
night in another part of the world. World
Time displays time in the 24 different time
zones around the world.
Tashkent
Mumbai
New Delhi
Colombo
Hong Kong
Beijing
Kathmandu
1. At the Tools menu, select World
Time. A world map appears in the
display.
Alma-ata
Adelaide
Bangkok
Jakarta
Seoul
Tokyo
Guam
Sydney
Okhotsk
Wellington
Auckland
PST/PDT:
San Francisco
Los Angeles
2. To display the time zone and city that you wish to view, use
the Left and Right navigation keys, or press the Options
soft key, then select Go to City and the preferred city in the
alphabetical city list.
Samoa
Midway
HAST/HADT:
Honolulu
Hawaii
AKST/AKDT:
Alaska
MST/MDT:
Denver
CST/CDT:
Dallas
Phoenix
Chicago
109
Download from Www.Somanuals.com. All Manuals Search And Download.
3. The following options are available:
•
•
•
•
•
Up navigation key — [
Left navigation key — [
OK key — [ ] Equals/Total
Right navigation key — [
Down navigation key — [
x
] Multiplication
-
] Subtraction
•
To show Daylight Saving Time (DST) for the displayed time zone,
press the DST On soft key. To display standard time, press the DST
Off soft key.
=
+] Addition
•
•
Press the Options soft key and select Set as home zone to set the
÷] Division
displayed time zone as the home time zone for the phone.
For nested operations [such as (1.81 + 9.34) / 5.22] and to
Press
to keep the current home time zone and return to the
2
calculate powers (such as 3 ), press the Operator soft key.
Tools menu.
The following options appear in the display:
Calculator
•
•
•
(
)
— Beginning of nested operation
— Ending of nested operation
You can perform calculations, including
addition, subtraction, multiplication, and
division using the phone.
Power — Raise the current number to the power of the next entry
1. At the Tools menu, select Calculator.
The Calculator appears in the
display.
4. Use the keypad to enter the next number in the calculation.
5. Repeat steps 3 and 4 as needed.
6. Press
to perform the calculation and view the result.
to clear the last operation or number entry.
2. Enter the first number in the calculation using the keypad
7. Press
(numbers can be up to nine digits long).
8. Press the Clear soft key To clear all of the entries.
•
To enter a decimal point, press
digits after a decimal point.)
. (Calculator only accepts 3
•
To change the sign for a number to a negative, press
.
3. Use the Navigation key to set the type of calculation that
you wish to perform. Choices are as follows:
Tools
110
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Area
Stop Watch
Temperature
You can use this menu to set a stop watch.
1. At the Tools menu, select Stop
Watch.
To convert a currency, length, weight,
volume, area, or temperature, do the
following:
2. Press
to start, stop, and resume
1. At the Tools menu, select Converter.
the stopwatch count.
2. Select the conversion feature you
3. Press the Record soft key at the
start of each succeeding event/lap to
record the completion time for the
previous event/lap.
wish to use. The selected conversion feature screen
appears in the display with the From unit field highlighted.
3. Use the Left and Right navigation keys to select the unit to
convert From.
4. Press the Reset soft key to erase all
4. Highlight the From quantity field.
stop watch (lap) times recorded.
5. Use the keypad to enter the quantity
you want converted in the From
quantity field.
Converter
The conversion menu provides the following conversion features:
•
•
•
•
Currency
Length
Weight
Volume
6. Highlight the To unit field.
7. Use the Left and Right navigation
keys to select the units to convert
From and To. The converted quantity
displays in the To quantity field.
111
Download from Www.Somanuals.com. All Manuals Search And Download.
•
Press the Cancel soft key to discard the changes and return to the
Currency Converter screen.
Note: To include a decimal point, press
.
Currency — Adding Exchange Rates
Currency — Reviewing/Editing Exchange Rates
You can use the Currency Converter to convert from and to
obscure currencies by adding exchange rates for these
currencies. To add a currency and its exchange rate to the
Currency Converter, do the following:
The Currency Converter includes long-term average exchange
rates as default values. To review and/or change a default
exchange rate to the current exchange rate, do the following:
1. At the Tools menu, select Converter ➔ Currency.
1. At the Tools menu, select Converter ➔ Currency.
2. Press the Rate soft key. The
Exchange Rate list for the USD (U.S.
Dollars) currency appears in the
display.
2. Press the Rate soft key. The Exchange Rate list for the
USD (U.S. Dollars) currency appears in the display.
3. Press the Add soft key. The Add
Exchange Rate screen appears in
the display with the Base field
highlighted.
3. Select the currency exchange rate
you want to change.
4. To edit the highlighted exchange
4. Use the Left and Right navigation
keys to select the Base currency to
convert from.
rate, press EDIT
(
).
5. Use the keypad to change the
current exchange rate. (For more
•
Press to save the changed exchange
rate.
Tools
112
Download from Www.Somanuals.com. All Manuals Search And Download.
5. Highlight the Currency field.
Currency — Erasing Exchange Rates
You cannot erase the preloaded currencies from the Exchange
Rate list. You can erase a currency that you have added to the list
by doing the following:
6. Enter an identifier of up to 5
characters for the new currency
1. At the Tools menu, select Converter ➔ Currency.
2. Press the Rate soft key. The Exchange Rate list for the
USD (U.S. Dollars) currency appears in the display.
7. Highlight the Exchange Rate field.
3. Highlight the currency exchange rate
8. Enter a decimal exchange rate for the new currency using
to erase.
4. Press the Erase soft key. You are
prompted to confirm the erasure.
Note: Press the
key to enter the decimal point.
•
To erase the highlighted exchange rate,
press the Yes soft key.
The Exchange Rate field only accepts up to 5 digits after the decimal
point.
•
To keep the highlighted exchange rate,
press the No soft key.
9. To save the new exchange rate,
Tip Calculator
Tip Calculator automatically calculates the
following amounts:
press
. The Exchange Rate list
for the USD (U.S. Dollars) currency
appears in the display with the new
exchange rate at the bottom of the
list.
•
•
Gratuity (tip)
Individual payment (for groups)
113
Download from Www.Somanuals.com. All Manuals Search And Download.
Calculations are based on the total amount of the check, a
selected percentage, and the number of people paying.
1. At the Tools menu, select Tip Calculator. The Tip Calculator
screen appears in the display with the Bill field
highlighted.
2. Use the keypad to enter the total amount of the bill.
Note: To include a decimal point, press the
key.
3. If needed, highlight the Tip field and use the keypad to
change the tip percentage.
4. If needed, highlight the # Paying field and use the keypad
to change the number of persons paying.
5. The amount of the Tip, the bill Total, and the amount each
person should pay appear in the lower half of the screen.
Tools
114
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 16: Changing Your Display Settings
This section shows you how to change the phone’s menu
appearance, display brightness and contrast, and display
content.
• Picture — Lets you select a photo you’ve taken or an image that
you’ve downloaded from the Internet as a wallpaper image.
• Video — Lets you select a video a video you’ve taken or a video
you’ve downloaded from the Internet as a wallpaper image.
Accessing the Display Menu
• Preset Images — Lets you select an image that came preloaded
with the phone as a wallpaper image.
To access the Display menu, do the following:
1. In Standby mode, press Menu ( ), then select Display.
The Display menu appears in the display.
2. Select the image type that you wish to use. An array of
images appears in the display.
3. Select the image that you wish to use.
Tip: To launch the Display menu using a voice command — In Standby
mode, press and hold
until the phone prompts, “Say a command.”
Clock Format
Say “Go to Display” into the microphone.
Clock Format lets you choose the format the phone uses to
present the current time on the main displays while the phone is
closed or in Standby mode.
2. Select the desired sub-menu. The following sections
describe the Display sub-menus in greater detail.
1. At the Display menu, select Clock Format. The following
Wallpaper
options are available: Music, Digital, Analog and Off.
Wallpaper lets you choose the images that display in the
background of your phone’s main screens while the phone is
closed or in Standby mode.
2. Use the Up and Down Navigation keys to select from the
available Clock Formats, then press
Format setting.
to save the Clock
1. At the Display menu, select Wallpaper. The following
options appear in the display:
115
Download from Www.Somanuals.com. All Manuals Search And Download.
Dialing Font Size
Note: Prolonged backlight use drains your battery faster.
Lets you select the size of the dialing font.
1. At the Display menu, select Dialing Font Size
choose between Normal and Large.
1. At the Display menu, select Backlight The following sub-
.
.
You can
menus appear in the display:
• Main Display — Sets how long the display backlight remains on
after a period of inactivity. Optional settings are: 7 seconds 15
seconds 30 seconds Always On, and Always Off
2. Select the desired setting.
,
Banner
,
,
.
• Keypad — Sets how long the keypad backlight remains on after a
period of inactivity. Optional settings are: 7 seconds 15 seconds
30 seconds Always On, and Always Off
Create your own personalized greeting to appear in the display
while your phone is in Standby mode.
,
,
,
.
1. At the Display menu, select Banner.
• Charging — Sets how long the display backlight remains on while
charging the battery. Optional settings are: 7 seconds 15
seconds 30 seconds Always On, and Always Off
,
Tip: Press and hold
to erase an existing banner, if necessary.
,
,
.
• Brightness — Sets the brightness of the backlight to one of five
2. Enter a word or short phrase to appear in your phone’s
display while in Standby mode (Up to 18 characters). (For
possible settings.
2. Select the desired sub-menu, then select the desired
setting.
3. Press
to save the new banner.
Backlight
You can set the backlight for your display or keypad to remain on
for a specified period of time or remain on as long as the folder is
open.
Changing Your Display Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
116
Section 17: Changing Your Sound Settings
This section shows you how to customize your phone’s audio
properties, such as ringers, keypad tones, alerts, shut down
sounds, and more.
2. Use the Navigation key or the Volume key (on the left side
of your phone) to change the volume level (Silence All,
Vibrate, Low, Low/Medium, Medium, Medium/High,
High).
Accessing the Sounds Menu
To access the Sounds menu, do the following:
1. In Standby mode, press Menu ( ), then select Sounds.
The Sounds menu appears in the display.
Tip: To preview the current ringtone while adjusting the Master Volume
setting, press the Play soft key.
3. To add vibration to the Master Volume settings Low, Low/
Medium, Medium, Medium/High, and High, press the
Vib. on soft key.
Tip: To launch the Sounds menu using a voice command — In Standby
mode, press and hold
until the phone prompts, “Say a command.”
Say “Go to Sounds” into the microphone.
4. Press SET
(
) to save the volume level/vibrate mode.
2. Select the desired sub-menu. The following sections
Ringer Type
describe the Sounds sub-menus in greater detail.
You can assign ring tones for calls and other alerts in the Ringer
Type sub menu.
Master Volume
Use the Master Volume sub-menu to set the default volume for
1. From the Sounds menu, select Ringer Type. The following
incoming calls and alarms.
Ringer Types appear in the display:
1. From the Sound s menu, select Master Volume. The
current Master Volume setting appears in the display.
117
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Voice Calls
Messages
•
•
Call Connect — Sound an alert when you connect a call.
Power On/Off — Sound an alert when you turn your phone on or
off.
–
–
–
Text Message
Picture Message
Voicemail
2. Select the desired option. The following settings appear in
the display:
2. Select the desired Ringer Type. The Ringtone screen
•
•
On
Off
appears in the display.
3. Highlight the desired setting.
3. Use the Navigation key to scroll through the ringtones and
sounds for the preferred ringer.
•
•
To save the new setting, press
.
To retain the current setting, press
.
•
•
To play each ringtone or sound, press the Play soft key.
Key Tone
To save the desired ringtone or sound selection, press
.
Alerts
Key Tone allows you to adjust the volume level and length of the
tone that the keypad generates each time you press a key.
You can set your phone to sound an alert whenever you enter or
leave your service area, connect or disconnect a call, and other
options.
1. From the Sounds menu, select Key Tone. The following
options appear in the display:
1. From the Sounds menu, select Alerts The following
.
•
•
Tone Level
options appear in the display:
Tone Length
•
Minute Beep — Sound an alert ten seconds before each elapsed
minute of a call.
•
Roaming — Sound an alert when you leave your home service
area while on a call.
Changing Your Sound Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
118
2. Select the desired option.
•
If you select Tone Level:
–
–
To set the keypad Tone Level, use the Volume key or Navigation key.
To save your Tone Level setting, press . You are returned to the Key
Tone sub-menu.
•
If you select Tone Length
:
–
–
Highlight Short or Long.
To save your Tone Length setting, press . You are returned to the
Key Tone sub menu.
119
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 18: Changing Your Call and Phone Settings
This section explains how to customize your call and phone
settings to suit your needs and preferences.
Location
This function identifies your location to the network via the Global
Positioning System (GPS). You can set this function for
continuous operation or to operate only in the event that you dial
911.
Accessing Your Call and Phone Settings
1. In Standby mode, press Menu
(
), then select Settings.
Tip: To launch the Settings menu using a voice command — In Standby
mode, press and hold
until the phone prompts, “Say a command.
”
Note: Contact your service provider to determine whether, when, or where
Say “Go to Settings” into the microphone.
location-based services are available.
The Settings menu appears in the display showing the
1. At the Settings menu, select Location. A multiple-screen
description of this feature appears in the display followed
by the following options:
following options and sub-menus:
• Location — Set your phone to send location data continually or
only when you dial 911.
•
Location On — GPS location is on whenever you make or receive
a call, wherever the feature is available.
• Call Settings — Set how your phone handles voice and data calls.
• Phone Settings — Set your phone’s safety, network, and security
•
911 Only — GPS location is on only when you dial 911.
options.
2. Select the desired Location setting. You’re returned to the
• Memory Info — Select where photos are stored, manage your
phone’s memory, and format and manage Memory Card storage.
Settings menu.
Call Settings
The Call Settings options let you select how your phone handles
voice and data calls.
• Phone Info — Access information about your phone, such as your
phone number, meanings of phone status icons, hardware and
software versions, and more. (Some of this information is valuable
to you if you need to call for customer support.)
2. Select the desired option or sub-menu.
Changing Your Call and Phone Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
120
To access the Call Settings sub-menu, do the following:
Auto Answer
ᮣ
At the Settings menu, select Call Settings. The Call
Auto Answer enables your phone to automatically answer calls
after a period of time that you specify.
Settings sub-menu appears in the display.
The following sub-sections detail the available Call Settings.
Note: To use your r520 in Auto Answer mode, you must connect a handsfree
headset (wired or Bluetooth) or a Bluetooth Handsfree Kit to your
phone.
Call Answer
You can select a specific answer mode when you receive an
incoming call. Your phone can be preset to answer when you do
any of the following:
1. At the Call Settings sub-menu, select Auto Answer. The
following options appear in the display:
•
•
•
Press any key.
•
•
Off — Disables automatic answering of calls.
Press the Send key.
Open the slide.
After 1 Second — Phone automatically answers calls after 1
second.
1. At the Call Settings sub-menu, select Call Answer. The
Call Answer sub-menu with the following options appears
in the display:
•
•
After 3 Seconds — Phone automatically answers calls after 3
seconds.
After 5 Seconds — Phone automatically answers calls after 5
seconds.
• Any Key — Press any key except the
,
, or Left soft
2. Select the desired setting.
key to answer an incoming call.
•
•
Send Key — Press
to answer an incoming call.
Note: Any setting other than Off causes the Auto Answer icon ( ) to display.
Open Slide — Slide the phone open to answer an incoming call.
Tip: You can set your phone to answer calls automatically, without any input
2. Select the method you wish to use for answering calls.
121
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Retry
Note: Your r520 has a 3.5 mm headset connector. Contact your Wireless
Provider to determine whether you need an adapter for your TTY
device.
Auto Retry automatically re-dials a number if the connection fails.
Depending upon your location, the number of times your phone
automatically dials the number may vary.
1. At the Call Settings sub-menu, select TTY Mode. You are
prompted to confirm you want to change the current TTY
Mode setting.
1. At the Call Settings sub-menu, select Auto Retry.
The Auto Retry sub-menu with the following options
appears in the display:
Note: The “Enabling TTY may impair headset use and non-TTY accessory
message pops up when you select TTY Mode
”
•
•
Off — Disables automatic redialing of numbers.
.
Every 10 Seconds — Phone automatically redials a number
every 10 seconds.
•
•
To access the TTY Mode options, press the Yes soft key.
To return to the Call Settings sub-menu, press the No soft key.
•
•
Every 30 Seconds — Phone automatically redials a number
every 30 seconds.
2. When you press the Yes soft key, the following options
Every 60 Seconds — Phone automatically redials a number
every 60 seconds.
appear in the display:
•
TTY Full — Enables TTY mode and disables microphone and
earpiece
2. Select the desired setting.
TTY Mode
•
•
•
TTY+Talk — Enables TTY mode and microphone
TTY+Hear — Enables TTY mode and earpiece
TTY Off — Disables TTY mode
Your phone is fully TTY compatible. TTY
equipment is connected to your phone
through the headset connector on the right
side of the phone. TTY Mode must be
enabled before you can use your phone with
a TTY device.
3. Select the desired TTY Mode setting.
Note: The TTY icon (
) appears in the top of the display when the phone is
in Standby mode.
Changing Your Call and Phone Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
122
Voice Privacy
ᮣ
At the Settings menu, select Phone Settings. The Phone
Settings sub-menu appears in the display.
When Voice Privacy is enabled (that is, set to Enhanced), it turns
on advanced voice encryption.
The following sub-sections detail the available Phone Settings.
1. At the Call Settings sub-menu, select Voice Privacy. The
Airplane Mode
following options appear in the display:
When set to On, Airplane Mode disables all radio functions of
your phone. This prevents you from receiving or making calls
(except emergency calls), but allows you to use other features
(such as the camera and the Tools) safely in sensitive
environments, such as on board an aircraft.
•
•
Standard — Voice privacy is disabled.
Enhanced — Voice privacy is enabled.
2. Select the Voice Privacy setting of your choice.
International Dialing
1. At the Phone Settings sub-menu, select Airplane Mode.
Use this option to select a frequently-dialed country code for
dialing by the International Dialing shortcut. (For more information
The following options appear in the display:
•
•
On — Disables the radio transmitter and receiver in your phone.
Off — Enables the radio transmitter and receiver in your phone.
2. Select the desired Airplane Mode setting.
1. At the Call Settings sub-menu, select International
Dialing. A list of country codes appears in the display.
Shortcut Key
2. Select the country code of your choice.
Shortcut Key lets you set which feature, function, or application
launches when you press the Navigation key Up, Down, Right or
Left while in Standby mode.
Phone Settings
The Phone Settings options let you tailor your phones basic
operations. To access the Phone Settings sub-menu, do the
following:
123
Download from Www.Somanuals.com. All Manuals Search And Download.
1. At the Phone Settings sub-menu, select Shortcut Key ➔
Up Key Down Key Left Key Right Key
The following options appear in the display:
Security
/
/
/
.
Use the Security sub-menu to lock your phone, set up emergency
numbers, enable or disable voice privacy, set restrictions, and
other security options.
•
•
•
•
•
•
•
Brew
•
•
•
•
•
•
•
Voice Command
Picture
•
•
•
•
•
•
Calculator
1. From the Settings menu, select Phone Settings
➔
Security.
Browser
Stop Watch
Voice Recording
Camera
The “Enter Code” prompt appears in the display.
New Text Msg
New Pic Msg
Inbox
Ringtone
2. Enter the four-digit lock code using the keypad.
Calendar
Memo Pad
Alarm Clock
World Time
Converter
Note: The default lock code is the last four digits of your mobile phone
Contacts
Recent Calls
Tip Calculator
number.
The “Enter Code” prompt disappears and the Security
2. Select the desired setting for each Shortcut Key.
menu appears in the display.
Language
Lock Phone
The language option on your phone can change the language of
voice prompts, menus, and key-input.
Locking the phone limits all outgoing calls except calls to 911
emergency and the three user-programmable emergency
1. At the Phone Settings sub-menu, select Language. The
numbers. You can lock the phone manually during use, or set the
phone to lock automatically when it is turned on. With the phone
in lock mode, you can answer incoming calls, but you must
unlock the phone to place outgoing calls (except to emergency
and secret numbers).
following options appear in the display:
•
•
English
Español
2. Select your language preference.
Changing Your Call and Phone Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
124
1. At the Security sub-menu, select Lock Phone.
Note: Your phone does not allow you to view the lock code for obvious
security reasons. If you change the lock code, be sure to write down or
memorize the new code.
The following Device Lock Mode options appear in the
display:
Emergency #
•
Lock — Locks the phone immediately. (The phone stays locked
until you enter the lock code.)
Your phone provides the option of storing three emergency
numbers. Each number can be up to 32 digits in length. All
emergency numbers can be manually called at any time, even
when your phone is locked or restricted. This can be a useful
feature for controlling outgoing calls from your phone.
•
•
Unlock — Unlocks the phone.
On Power Up — The phone locks automatically the next time your
phone is powered on. (The phone stays locked until you enter the
lock code.)
2. Select the Device Lock Mode option of your choice.
Note: Emergency number 911 is hard-coded into your phone. You can dial
this number any time, even when the phone is locked or restricted. If
you call 911 an audible tone is heard and an Emergency prompt
appears in the display for the duration of the call.
Change Lock
The default lock code for your phone is generally the last four
digits of your phone number. It is advisable to change the default
lock code to a secret code for security purposes.
Important!: Because of various transmission methods, network parameters,
and user settings necessary to complete a call from your
wireless phone, a connection cannot always be guaranteed.
Therefore, emergency calling may not be available on all
wireless networks at all times.
1. At the Security sub-menu, select Change Lock. You’re
prompted to enter the new lock code.
2. Enter the new lock code. You’re prompted to re-enter the
new lock code for verification.
Important!: DO NOT depend on this phone as a primary method of calling
3. Enter the new lock code again. Your changes are stored.
911 or for any other essential or emergency communications.
Remember to always turn your phone on and check for adequate
signal strength before placing a call.
125
Download from Www.Somanuals.com. All Manuals Search And Download.
Store Emergency Numbers
2. Select the desired Emergency Ringback setting.
1. At the Security sub-menu, select Emergency #.
Master Reset
2. Select from the three emergency number entries.
Reset Phone returns all setup options to their factory default.
1. At the Security sub-menu, select Master Reset. You are
prompted to confirm that you want to restore your phone’s
default settings (except for the Contacts and Voice Dial).
3. Enter an emergency number (up to 32 digits in length).
4. Press
to save the number that you entered.
Call Emergency Numbers in Lock Mode
•
•
To restore default settings, select Yes
To retain your current settings and return to the Security sub-
menu, select No
.
1. In Standby mode, enter the emergency number.
2. Press
to place the call.
.
Erase All Entries
Emergency Ringback
Erase All Entries erases all information from your Contacts list.
Emergency Ringback lets you enable or disable the alert tone
your phone plays during an Emergency call.
Note: To completely remove any personal information stored on your device,
Tip: This feature can be valuable during emergency situations, such as, a
home invasion. Disabling the Emergency call alert tone can prevent a
home invader from locating you by means of that tone.
1. At the Security sub-menu, select Erase All Entries.
1. At the Security sub-menu, select Emergency Ringback.
Note: The default lock code is the last four digits of your mobile phone
number.
The following options appear in the display:
•
On — Your phone plays an audible alert tone during Emergency
The “Erase All Entries?” prompt appears in the display.
calls.
•
•
To erase all Contacts list entries, press the Yes soft key.
•
Off — Your phone does not play an audible alert tone during
Emergency calls, but does vibrate.
To keep the current Contacts list entries, press the No soft key.
Changing Your Call and Phone Settings
126
Download from Www.Somanuals.com. All Manuals Search And Download.
Restrictions
2. Select the desired Restriction and setting and press
.
Restrictions lets you limit the use of your phone to make outgoing
calls and/or to receive incoming calls to any numbers, to no
numbers, or to calls from/to your Contacts.
Note: Default setting for all Restrictions is Allow All
.
NAM Selection
1. At the Security sub-menu, select Restrictions. The
following options appear in the display:
The Network menu allows you to select NAM (Number
Assignment Module) settings for your phone. You can store two
NAM settings, which are essentially telephone numbers, for your
phone.
• Calls — Lets you restrict the following call types:
–
Incoming — Lets you Allow All incoming calls, Allow incoming calls
only from Contacts, or Allow None.
1. At the Phone Settings sub-menu, select NAM Selection.
–
Outgoing — Lets you Allow All outgoing calls, Allow outgoing calls only
to Contacts, or Allow None.
The following options appear in the display:
•
•
NAM1 — Your service contract has one phone line.
• SMS Messages — Lets you restrict the following Text message
types:
NAM2 — Your service contract has two phone lines.
2. Select the desired NAM option. The phone powers itself off
–
Incoming — Lets you Allow All incoming Text messages or Allow
None.
and back on.
–
Outgoing — Lets you Allow All outgoing Text messages or Allow None.
System Select
• MMS Messages — Lets you restrict the following Picture and
Video message types:
The System Select menu allows you to select the roaming
setting for your phone.
–
–
Incoming — Lets you Allow All incoming Picture and Video messages
or Allow None.
1. At the Phone Settings sub-menu, select System Select.
Outgoing — Lets you Allow All outgoing Picture and Video messages
or Allow None.
The following roaming options appear in the display:
• IP Connection — Lets you Allow All Internet Protocol (IP)
connections or Allow None.
127
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Home Only — Your phone is available for normal operation only
For Set Date, the Set Date screen appears in the display.
within your designated coverage area.
•
Enter the current date using your keypad.
The month and day must be entered using two digits each. The
year must be entered using all four digits.
Automatic — The Preferred Roaming List (PRL) is used to acquire
service. If no preferred systems are found, any digital system is
acquired.
•
Press
to save your date setting.
2. Select the desired roaming option.
Quick Search
Set Time
Quick Search is an easy way to find Contacts list entries.
1. At the Phone Settings sub-menu, select Quick Search.
The following options appear in the display:
Use the Set Time option to set the current date and time.
Note: In digital service mode, the Set Time feature is disabled. The network
adjusts time and date automatically.
•
•
On — Quick Search is enabled.
Off — Quick Search is disabled.
1. At the Phone Settings sub-menu, select Set Time. The
2. Select the desired Quick Search setting.
following options appear in the display:
Searching for a Contact
•
•
Set Time
Set Date
1. In Standby mode, press the first few numeric keys that
correspond to the letters of the Contacts name.
2. Select the desired option.
For example, to search for “Sally” you could enter:
For Set Time, the Set Time screen appears in the display.
•
Enter the current time using your keypad.
The hour and minute must be entered using two digits each and in 12-
hour format.
S
A
L
•
•
Use the Left and Right navigation keys to select AM or PM
.
Press to save the your time setting.
Changing Your Call and Phone Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
128
2. Press the Up navigation key. The Find screen appears in
the display showing the Contacts entries with names that
correspond to your key entries.
• No Connection — This option blocks your r520 from connecting
with a PC.
2. Select the preferred PC Connection type.
Memory Info
3. Highlight the desired Contacts entry.
Memory Info lets you quickly and easily review and manage your
phone memory usage. To access Memory Info, do the following:
4. Press
to call the highlighted Contact.
PC Connection
1. At the Settings sub-menu, select Memory Info. The
Memory Info screen appears in the display showing the
following options:
Lets you select the default type of PC connection you wish to use
to exchange files between a PC and your r520.
• Save Options — Lets you specify whether your images and videos
are stored in your phone or on an optional microSD Memory Card.
Tip: For more information on using PC Connection, contact your service
provider.
• Phone Memory — Lets you review your phone’s available memory
and manage your files stored there.
1. At the Phone Settings sub-menu, select PC Connection.
The following options appear in the display:
• Card Memory — Lets you review a removable micro SD Memory
Card’s available memory, manage your files stored there, and
format used Memory Cards.
• USB Mass Storage — Automatically activates when you connect
your phone to a PC with an optional USB Data Cable. Lets you
access your phone’s memory and any optional microSD Memory
Card, if installed, from your PC. (For more information, refer to
• Music Memory — Lets you review your phone’s available music
file storage memory and manage your files stored there.
Save Options
• Bluetooth — Lets you automatically transfer files, such as
Contacts information, from your phone to a PC over a Bluetooth
connection. This option requires that you pair (register) your PC and
Lets you specify where you want your images and videos stored.
1. At the Settings sub-menu, select Memory Info
Options Images Videos
➔
Save
➔
/
.
129
Download from Www.Somanuals.com. All Manuals Search And Download.
The following storage options appear in the display:
•
•
•
Ringtone memory usage
Applications memory usage
Pic/Video Msg memory usage
•
Phone Memory — Saves the selected type of files in your
phone’s memory.
•
Card Memory — Saves the selected type of files in a removable
2. Press
to return to the Phone Memory menu.
microSD memory card.
Freeing Memory
2. Select the desired storage location. “Images Videos set”
/
Phone Memory sub-menus let you list files in your multimedia
folders and let you erase or move files as needed to free up
memory on your phone for reuse.
appears in the display, and you are returned to the Save
Options sub-menu.
Phone Memory
1. At the Settings sub-menu, select Memory Info
➔
Phone
Lets you review your phone’s available memory and manage your
files stored there.
Memory ➔ Picture / Video / Ringtone sub-menu. A list of
all files in the related folder appears in the display.
Memory Usage
Files are listed by name, and each file entry shows the
name and size of each file.
Memory Usage lets you review your usage of your phone’s
memory.
2. To erase files, do the following:
1. At the Settings sub-menu, select Memory Info
➔
Phone
•
•
Press the Options soft key, then select Erase.
Memory ➔ Memory Usage. The Memory Usage screen
Highlight a file you want to erase, then press to mark the file for
erasure. (To mark all files for erasure, press the Mark All soft key.)
appears in the display showing the following information:
•
•
•
Total Used memory usage
Available unused memory
Picture memory usage
•
•
Press the Done soft key. You are prompted to confirm erasure of
the selected file(s).
To erase all marked files, press the Yes soft key. To keep the
marked files and return to the Erase screen, press the No soft key.
• Video memory usage
Changing Your Call and Phone Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
130
3. To move or copy image files to the Memory Card, do the
The Memory Usage screen appears in the display
following:
showing the following information:
•
•
Press the Options soft key, then select Move
/
Copy
.
•
•
•
•
•
Total Used memory usage
Available unused memory
Picture memory usage
Highlight a file you want to move or copy, then press to mark
the file for moving or copying. (To mark all files for moving or
copying, press the Mark All soft key.)
Video memory usage
•
•
Press the Done soft key. You are prompted to confirm moving or
copying the selected file(s) to the Memory Card.
Music/Ringtone memory usage
2. Press
to return to the Card Memory menu.
To move or copy all marked files, press the Yes soft key. To keep
the marked files and return to the Move screen, press the No soft
key.
Freeing Memory
Card Memory sub-menus let you list files in your multimedia
folders and let you erase or move files as needed to free up
space on your Memory Card for reuse.
4. To return to the Picture / Video / Ringtone sub-menu,
press
.
Card Memory
1. At the Settings sub-menu, select Memory Info ➔ Card
Memory ➔ Picture / Video / Music / Ringtone sub-menu.
A list of all files in the related folder appears in the display.
Card Memory lets you review a removable, microSD Memory
Card’s available memory, manage your files stored there, and
format new microSD Memory Cards.
Files are listed by name, and each file entry shows the
name and size of the file.
Memory Usage
Memory Usage lets you review your usage of your Memory
Card.
2. To erase files, do the following:
•
•
Press the Options soft key, then select Erase.
1. At the Settings sub-menu, select Memory Info ➔ Card
Highlight a file you want to erase, then press to mark the file for
erasure. (To mark all files for erasure, press the Mark All soft key.)
Memory ➔ Memory Usage.
131
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Press the Done soft key. You are prompted to confirm erasure of
Caution!: Repeated formatting of a Memory Card shortens its service life.
the selected file(s).
To erase all marked files, press the Yes soft key. To keep the
marked files and return to the Erase screen, press the No soft key.
To format a Memory Card, do the following:
1. At the Settings sub-menu, select Memory Info ➔ Card
Memory ➔ Format. You are prompted to confirm
formatting of the Memory Card.
3. To move or copy image files to Phone Memory or Music
Memory, do the following:
Note: Music files are automatically copied/moved to Music Memory.
2. To format the Memory Card, press the Yes soft key.
To cancel formatting the Memory Card and return to the
•
•
Press the Options soft key, then select Move Copy.
/
Highlight a file you want to move or copy, then press to mark
the file for moving or copying. (To mark all files for moving or
copying, press the Mark All soft key.)
Card Memory screen, press the No soft key.
Music Memory
•
•
Press the Done soft key. You are prompted to confirm moving or
Music Memory lets you review, manage, and format a portion of
your phone’s memory that is dedicated to storing music files.
copying the selected file(s) to Phone Memory.
To move or copying all marked files, press the Yes soft key. To keep
the marked files and return to the Move screen, press the No soft
key.
Memory Usage
Memory Usage lets you review your usage of your Music
Memory to store music files.
4. Press
to return to the Picture / Video / Music /
1. At the Settings sub-menu, select Memory Info ➔ Music
Ringtone sub-menu.
Memory ➔ Memory Usage.
Formatting a Memory Card
The Memory Usage screen appears in the display
Formatting a microSD Memory Card erases all data currently on
the card and creates multimedia directories compatible with your
phone.
showing the following information:
Changing Your Call and Phone Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
132
•
•
•
Total Used memory usage
Available unused memory
Music memory usage
3. To move or copy music files from a Memory Card to Music
Note: To move files from Music Memory, connect your phone to a personal
computer with an options USB Data Cable and move the music files
using the personal computer.
2. Press
to return to the Music Memory sub-menu.
Freeing Memory
4. Press
to return to the Music Memory sub-menu.
The Music Memory sub-menu lets you list your music files
stored in your phone’s Music Memory and lets you erase music
files as needed to free up space in Music Memory for reuse.
Formatting Music Memory
Formatting Memory erases all music files currently stored on
your phone’s Music Memory.
1. At the Settings sub-menu, select Memory Info ➔ Music
Memory ➔ Music sub-menu. A list of all files in Music
Memory folder appears in the display.
1. At the Settings sub-menu, select Memory Info ➔ Music
Memory ➔ Format. You are prompted to confirm
formatting of Music Memory.
Files are listed by name, and each file entry shows the
name and size of the file.
2. To format the phone’s Music Memory, press the Yes soft
2. To erase music files, do the following:
key.
•
•
Press the Erase soft key.
To cancel formatting the phone’s Music Memory and return
Highlight a file you want to erase, then press to mark the file for
erasure. (To mark all files for erasure, press the Mark All soft key.)
to the Music Memory screen, press the No soft key.
Phone Info
•
•
Press the Done soft key. You are prompted to confirm erasure of
the selected file(s).
The Phone Info options show you the hardware and software
versions of your phone, definitions of the icons that appear at the
tops of the phone displays, and the phone number assigned to
your phone.
To erase all marked files, press the Yes soft key. To keep the
marked files and return to the Erase screen, press the No soft key.
133
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone Number
Version
This option causes the Phone Number screen to appear in the
display and show the ten-digit number assigned to your phone by
your service provider.
You can view both the software and hardware version of your
phone using this feature. This feature is helpful if you need to
contact Customer Service.
1. At the Settings menu, select Phone Info ➔ Phone
Number. The phone number assigned by your service
provider appears in the display.
1. At the Settings menu, select Phone Info ➔ Version.
Your phone software (S/W), preferred roaming list (PRL),
Browser, BREW, hardware (H/W), MEID and pESN
information appears in the display.
2. To return to the Phone Info menu, press
.
2. To return to the Phone Info menu, press
.
Icon Glossary
This option causes the Icon Glossary list to appear in the display
and show the icons that can appear in the display and the names
of the icons.
1. At the Settings menu, select Phone Info ➔ Icon
Glossary. A list of the icons that can appear on the top line
of the display shows in the display.
2. Use the Up and Down navigation keys or the Volume key to
scroll through the icons list.
3. To return to the Phone Info menu, press
.
Changing Your Call and Phone Settings
Download from Www.Somanuals.com. All Manuals Search And Download.
134
Section 19: Health and Safety Information
This section outlines the safety precautions associated with using
your phone. These safety precautions should be followed to
safely use your phone.
absorption of RF energy by the human body expressed in units of
watts per kilogram (W/kg). The FCC requires wireless phones to
comply with a safety limit of 1.6 watts per kilogram (1.6 W/kg).
Health and Safety Information
Exposure to Radio Frequency (RF) Signals
Certification Information (SAR)
The FCC exposure limit incorporates a substantial margin of
safety to give additional protection to the public and to account
for any variations in measurements.
SAR tests are conducted using standard operating positions
accepted by the FCC with the phone transmitting at its highest
certified power level in all tested frequency bands. Although the
SAR is determined at the highest certified power level, the actual
SAR level of the phone while operating can be well below the
maximum value. This is because the phone is designed to
operate at multiple power levels so as to use only the power
required to reach the network. In general, the closer you are to a
wireless base station antenna, the lower the power output.
Your wireless phone is a radio transmitter and receiver. It is
designed and manufactured not to exceed the exposure limits for
radio frequency (RF) energy set by the Federal Communications
Commission (FCC) of the U.S. government.
These FCC exposure limits are derived from the
recommendations of two expert organizations, the National
Counsel on Radiation Protection and Measurement (NCRP) and
the Institute of Electrical and Electronics Engineers (IEEE).
In both cases, the recommendations were developed by scientific
and engineering experts drawn from industry, government, and
academia after extensive reviews of the scientific literature
related to the biological effects of RF energy.
Before a new model phone is available for sale to the public, it
must be tested and certified to the FCC that it does not exceed
the exposure limit established by the FCC. Tests for each model
phone are performed in positions and locations (e.g. at the ear
and worn on the body) as required by the FCC.
The exposure limit set by the FCC for wireless mobile phones
employs a unit of measurement known as the Specific
Absorption Rate (SAR). The SAR is a measure of the rate of
For body worn operation, this phone has been tested and meets
FCC RF exposure guidelines when used with an accessory that
135
Download from Www.Somanuals.com. All Manuals Search And Download.
contains no metal and that positions the handset a minimum of
1.5 cm from the body.
phone. Additional product specific SAR information can also be
obtained at www.fcc.gov/cgb/sar.
Warning Regarding Display
Use of other accessories may not ensure compliance with FCC RF
exposure guidelines.
The display on your handset is made of glass or acrylic and could
break if your handset is dropped or if it receives significant
impact. Do not use if screen is broken or cracked as this could
cause injury to you.
The FCC has granted an Equipment Authorization for this mobile
phone with all reported SAR levels evaluated as in compliance
with the FCC RF exposure guidelines. The maximum SAR values
for this model phone as reported to the FCC are:
Samsung Mobile Products and Recycling
Samsung cares for the environment and encourages its
customers to recycle Samsung mobile phones and genuine
Samsung accessories.
Part 22
•
•
Head: 0.685 W/Kg.
Body-worn: 0.553 W/Kg.
Part 24
information.
•
•
Head: 1.22 W/Kg.
Body-worn: 0.691 W/Kg.
UL Certified Travel Adapter
SAR information on this and other model phones can be viewed
pertains to a particular model phone, this site uses the phone
FCC ID number which is usually printed somewhere on the case
of the phone.
The Travel Adapter for this phone has met applicable UL safety
requirements. Please adhere to the following safety instructions
per UL guidelines.
FAILURE TO FOLLOW THE INSTRUCTIONS OUTLINED MAY LEAD
TO SERIOUS PERSONAL INJURY AND POSSIBLE PROPERTY
DAMAGE.
Sometimes it may be necessary to remove the battery pack to
find the number. Once you have the FCC ID number for a
particular phone, follow the instructions on the website and it
should provide values for typical or maximum SAR for a particular
IMPORTANT SAFETY INSTRUCTIONS - SAVE THESE
INSTRUCTIONS.
Health and Safety Information
Download from Www.Somanuals.com. All Manuals Search And Download.
136
DANGER - TO REDUCE THE RISK OF FIRE OR ELECTRIC SHOCK,
CAREFULLY FOLLOW THESE INSTRUCTIONS.
exposure decreases rapidly with increasing distance from the
source. The so-called "cordless phones," which have a base unit
connected to the telephone wiring in a house, typically operate at
far lower power levels, and thus produce RF exposures well
within the FCC's compliance limits.
FOR CONNECTION TO A SUPPLY NOT IN NORTH AMERICA, USE
AN ATTACHMENT PLUG ADAPTOR OF THE PROPER
CONFIGURATION FOR THE POWER OUTLET. THIS POWER UNIT IS
INTENDED TO BE CORRECTLY ORIENTATED IN A VERTICAL OR
HORIZONTAL OR FLOOR MOUNT POSITION.
Do wireless phones pose a health hazard?
The available scientific evidence does not show that any health
problems are associated with using wireless phones. There is no
proof, however, that wireless phones are absolutely safe.
Wireless phones emit low levels of radio frequency energy (RF) in
the microwave range while being used. They also emit very low
levels of RF when in the stand-by mode. Whereas high levels of
RF can produce health effects (by heating tissue), exposure to
low level RF that does not produce heating effects causes no
known adverse health effects. Many studies of low level RF
exposures have not found any biological effects. Some studies
have suggested that some biological effects may occur, but such
findings have not been confirmed by additional research. In some
cases, other researchers have had difficulty in reproducing those
studies, or in determining the reasons for inconsistent results.
Consumer Information on Wireless Phones
The U.S. Food and Drug Administration (FDA) has published a
series of Questions and Answers for consumers relating to radio
frequency (RF) exposure from wireless phones. The FDA
publication includes the following information:
What kinds of phones are the subject of this update?
The term wireless phone refers here to hand-held wireless
phones with built-in antennas, often called "cell," "mobile," or
"PCS" phones. These types of wireless phones can expose the
user to measurable radio frequency energy (RF) because of the
short distance between the phone and the user's head. These RF
exposures are limited by Federal Communications Commission
safety guidelines that were developed with the advice of FDA and
other federal health and safety agencies.
What is FDA's role concerning the safety of wireless
phones?
When the phone is located at greater distances from the user, the
exposure to RF is drastically lower because a person's RF
Under the law, FDA does not review the safety of radiation-
emitting consumer products such as wireless phones before they
137
Download from Www.Somanuals.com. All Manuals Search And Download.
can be sold, as it does with new drugs or medical devices.
However, the agency has authority to take action if wireless
phones are shown to emit radio frequency energy (RF) at a level
that is hazardous to the user. In such a case, FDA could require
the manufacturers of wireless phones to notify users of the
health hazard and to repair, replace or recall the phones so that
the hazard no longer exists.
•
•
Occupational Safety and Health Administration
National Telecommunications and Information Administration
The National Institutes of Health participates in some interagency
working group activities, as well.
FDA shares regulatory responsibilities for wireless phones with
the Federal Communications Commission (FCC). All phones that
are sold in the United States must comply with FCC safety
guidelines that limit RF exposure. FCC relies on FDA and other
health agencies for safety questions about wireless phones.
Although the existing scientific data do not justify FDA regulatory
actions, FDA has urged the wireless phone industry to take a
number of steps, including the following:
FCC also regulates the base stations that the wireless phone
networks rely upon. While these base stations operate at higher
power than do the wireless phones themselves, the RF
exposures that people get from these base stations are typically
thousands of times lower than those they can get from wireless
phones.
•
•
•
Support needed research into possible biological effects of RF of the
type emitted by wireless phones;
Design wireless phones in a way that minimizes any RF exposure to
the user that is not necessary for device function; and
Cooperate in providing users of wireless phones with the best possible
information on possible effects of wireless phone use on human
health.
Base stations are thus not the primary subject of the safety
questions discussed in this document.
FDA belongs to an interagency working group of the federal
agencies that have responsibility for different aspects of RF
safety to ensure coordinated efforts at the federal level. The
following agencies belong to this working group:
What are the results of the research done already?
The research done thus far has produced conflicting results, and
many studies have suffered from flaws in their research
methods. Animal experiments investigating the effects of radio
frequency energy (RF) exposures characteristic of wireless
phones have yielded conflicting results that often cannot be
•
•
•
National Institute for Occupational Safety and Health
Environmental Protection Agency
Federal Communications Commission
Health and Safety Information
Download from Www.Somanuals.com. All Manuals Search And Download.
138
repeated in other laboratories. A few animal studies, however,
have suggested that low levels of RF could accelerate the
development of cancer in laboratory animals. However, many of
the studies that showed increased tumor development used
animals that had been genetically engineered or treated with
cancer-causing chemicals so as to be pre-disposed to develop
cancer in absence of RF exposure. Other studies exposed the
animals to RF for up to 22 hours per day. These conditions are
not similar to the conditions under which people use wireless
phones, so we don't know with certainty what the results of such
studies mean for human health.
What research is needed to decide whether RF exposure
from wireless phones poses a health risk?
A combination of laboratory studies and epidemiological studies
of people actually using wireless phones would provide some of
the data that are needed. Lifetime animal exposure studies could
be completed in a few years. However, very large numbers of
animals would be needed to provide reliable proof of a cancer
promoting effect if one exists.
Epidemiological studies can provide data that is directly
applicable to human populations, but ten or more years' follow-
up may be needed to provide answers about some health effects,
such as cancer.
Three large epidemiology studies have been published since
December 2000. Between them, the studies investigated any
possible association between the use of wireless phones and
primary brain cancer, glioma, meningioma, or acoustic neuroma,
tumors of the brain or salivary gland, leukemia, or other cancers.
None of the studies demonstrated the existence of any harmful
health effects from wireless phones RF exposures.
This is because the interval between the time of exposure to a
cancer-causing agent and the time tumors develop - if they do -
may be many, many years. The interpretation of epidemiological
studies is hampered by difficulties in measuring actual RF
exposure during day-to-day use of wireless phones. Many
factors affect this measurement, such as the angle at which the
phone is held, or which model of phone is used.
However, none of the studies can answer questions about long-
term exposures, since the average period of phone use in these
studies was around three years.
What is FDA doing to find out more about the possible
health effects of wireless phone RF?
FDA is working with the U.S. National Toxicology Program and
with groups of investigators around the world to ensure that high
priority animal studies are conducted to address important
139
Download from Www.Somanuals.com. All Manuals Search And Download.
questions about the effects of exposure to radio frequency
energy (RF).
concerned about avoiding even potential risks, you can take a
few simple steps to minimize your exposure to radio frequency
energy (RF). Since time is a key factor in how much exposure a
person receives, reducing the amount of time spent using a
wireless phone will reduce RF exposure.
FDA has been a leading participant in the World Health
Organization international Electromagnetic Fields (EMF) Project
since its inception in 1996. An influential result of this work has
been the development of a detailed agenda of research needs
that has driven the establishment of new research programs
around the world. The Project has also helped develop a series of
public information documents on EMF issues.
FDA and Cellular Telecommunications & Internet Association
(CTIA) have a formal Cooperative Research and Development
Agreement (CRADA) to do research on wireless phone safety.
FDA provides the scientific oversight, obtaining input from
experts in government, industry, and academic organizations.
CTIA-funded research is conducted through contracts to
independent investigators. The initial research will include both
laboratory studies and studies of wireless phone users. The
CRADA will also include a broad assessment of additional
research needs in the context of the latest research
developments around the world.
What steps can I take to reduce my exposure to radio
frequency energy from my wireless phone?
If there is a risk from these products - and at this point we do not
know that there is - it is probably very small. But if you are
Health and Safety Information
Download from Www.Somanuals.com. All Manuals Search And Download.
140
•
If you must conduct extended conversations by wireless phone every
day, you could place more distance between your body and the source
of the RF, since the exposure level drops off dramatically with distance.
For example, you could use a headset and carry the wireless phone
away from your body or use a wireless phone connected to a remote
antenna.
They noted that no evidence exists that using a wireless phone
causes brain tumors or other ill effects. Their recommendation to
limit wireless phone use by children was strictly precautionary; it
was not based on scientific evidence that any health hazard
exists.
Do hands-free kits for wireless phones reduce
risks from exposure to RF emissions?
Again, the scientific data do not demonstrate that wireless
phones are harmful. But if you are concerned about the RF
exposure from these products, you can use measures like those
described above to reduce your RF exposure from wireless phone
use.
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that hands-
free kits reduce risks. Hands-free kits can be used with wireless
phones for convenience and comfort. These systems reduce the
absorption of RF energy in the head because the phone, which is
the source of the RF emissions, will not be placed against the
head. On the other hand, if the phone is mounted against the
waist or other part of the body during use, then that part of the
body will absorb more RF energy. Wireless phones marketed in
the U.S. are required to meet safety requirements regardless of
whether they are used against the head or against the body.
Either configuration should result in compliance with the safety
limit.
What about children using wireless phones?
The scientific evidence does not show a danger to users of
wireless phones, including children and teenagers. If you want to
take steps to lower exposure to radio frequency energy (RF), the
measures described above would apply to children and
teenagers using wireless phones. Reducing the time of wireless
phone use and increasing the distance between the user and the
RF source will reduce RF exposure.
Some groups sponsored by other national governments have
advised that children be discouraged from using wireless phones
at all. For example, the government in the United Kingdom
distributed leaflets containing such a recommendation in
December 2000.
141
Download from Www.Somanuals.com. All Manuals Search And Download.
Do wireless phone accessories that claim to shield
the head from RF radiation work?
defibrillators from wireless telephones. This test method is now
part of a standard sponsored by the Association for the
Advancement of Medical instrumentation (AAMI). The final draft,
a joint effort by FDA, medical device manufacturers, and many
other groups, was completed in late 2000. This standard will
allow manufacturers to ensure that cardiac pacemakers and
defibrillators are safe from wireless phone EMI. FDA has tested
wireless phones and helped develop a voluntary standard
sponsored by the Institute of Electrical and Electronic Engineers
(IEEE). This standard specifies test methods and performance
requirements for hearing aids and wireless phones so that no
interference occurs when a person uses a compatible phone and
a compatible hearing aid at the same time. This standard was
approved by the IEEE in 2000.
Since there are no known risks from exposure to RF emissions
from wireless phones, there is no reason to believe that
accessories that claim to shield the head from those emissions
reduce risks. Some products that claim to shield the user from RF
absorption use special phone cases, while others involve nothing
more than a metallic accessory attached to the phone. Studies
have shown that these products generally do not work as
advertised. Unlike "hand-free" kits, these so-called "shields"
may interfere with proper operation of the phone. The phone may
be forced to boost its power to compensate, leading to an
increase in RF absorption. In February 2002, the Federal trade
Commission (FTC) charged two companies that sold devices that
claimed to protect wireless phone users from radiation with
making false and unsubstantiated claims.
FDA continues to monitor the use of wireless phones for possible
interactions with other medical devices. Should harmful
interference be found to occur, FDA will conduct testing to assess
the interference and work to resolve the problem.
According to FTC, these defendants lacked a reasonable basis to
substantiate their claim.
Additional information on the safety of RF exposures from various
sources can be obtained from the following organizations
(Updated 12/1/2006):
What about wireless phone interference with
medical equipment?
Radio frequency energy (RF) from wireless phones can interact
with some electronic devices. For this reason, FDA helped
develop a detailed test method to measure electromagnetic
interference (EMI) of implanted cardiac pacemakers and
•
FCC RF Safety Program:
Health and Safety Information
Download from Www.Somanuals.com. All Manuals Search And Download.
142
•
•
•
•
•
•
•
Environmental Protection Agency (EPA):
1. Get to know your wireless phone and its features, such as
speed dial and redial. If available, these features help you
to place your call without taking your attention off the road.
Occupational Safety and Health Administration's (OSHA):
2. When available, use a hands-free device. If possible, add
an additional layer of convenience and safety to your
wireless phone with one of the many hands free
accessories available today.
National Institute for Occupational Safety and Health (NIOSH):
World Health Organization (WHO):
International Commission on Non-Ionizing Radiation Protection:
3. Position your wireless phone within easy reach. Be able to
access your wireless phone without removing your eyes
from the road. If you get an incoming call at an
Health Protection Agency:
inconvenient time, let your voice mail answer it for you.
US Food and Drug Administration:
4. Let the person you are speaking with know you are driving;
if necessary, suspend the call in heavy traffic or hazardous
weather conditions. Rain, sleet, snow, ice and even heavy
traffic can be hazardous.
Road Safety
Your wireless phone gives you the powerful ability to
communicate by voice, almost anywhere, anytime. But an
important responsibility accompanies the benefits of wireless
phones, one that every user must uphold.
5. Do not take notes or look up phone numbers while driving.
Jotting down a "to do" list or flipping through your address
book takes attention away from your primary
responsibility, driving safely.
When driving a car, driving is your first responsibility. When using
your wireless phone behind the wheel of a car, practice good
common sense and remember the following tips:
143
Download from Www.Somanuals.com. All Manuals Search And Download.
6. Dial sensibly and assess the traffic; if possible, place calls
when you are not moving or before pulling into traffic. Try
to plan calls when your car will be stationary. If you need to
make a call while moving, dial only a few numbers, check
the road and your mirrors, then continue.
10. Call roadside assistance or a special non-emergency
wireless assistance number when necessary. If you see a
broken-down vehicle posing no serious hazard, a broken
traffic signal, a minor traffic accident where no one
appears injured, or a vehicle you know to be stolen, call
roadside assistance or other special non-emergency
number.
7. Do not engage in stressful or emotional conversations that
may be distracting. Make people you are talking with
aware you are driving and suspend conversations that
have the potential to divert your attention from the road.
"The wireless industry reminds you to use your phone safely when
driving."
For more information, please call 1-888-901-SAFE, or visit our
8. Use your wireless phone to call for help. Dial 9-1-1 or other
local emergency number in the case of fire, traffic accident
or medical emergencies.
web-site www.ctia.org
.
Important!: If you are using a handset other than a standard numeric keypad,
please call 1-888-901-7233.
9. Use your wireless phone to help others in emergencies. If
you see an auto accident, crime in progress or other
serious emergency where lives are in danger, call 9-1-1 or
other local emergency number, as you would want others
to do for you.
Provided by the Cellular Telecommunications & Internet
Association.
Responsible Listening
Caution!: Avoid potential hearing loss.
Damage to hearing occurs when a person is exposed to loud
sounds over time. The risk of hearing loss increases as sound is
played louder and for longer durations.
Health and Safety Information
Download from Www.Somanuals.com. All Manuals Search And Download.
144
Prolonged exposure to loud sounds (including music) is the most
common cause of preventable hearing loss. Some scientific
research suggests that using portable audio devices, such as
portable music players and cellular telephones, at high volume
settings for long durations may lead to permanent noise-induced
hearing loss. This includes the use of headphones (including
headsets, earbuds, and Bluetooth or other wireless devices).
Exposure to very loud sound has also been associated in some
studies with tinnitus (a ringing in the ear), hypersensitivity to
sound and distorted hearing.
•
Do not turn the volume up to block out noisy surroundings. If you
choose to listen to your portable device in a noisy environment, use
noise-cancelling headphones to block out background environmental
noise. By blocking background environment noise, noise cancelling
headphones should allow you to hear the music at lower volumes than
when using earbuds.
•
•
Limit the amount of time you listen. As the volume increases, less time
is required before you hearing could be affected.
Avoid using headphones after exposure to extremely loud noises, such
as rock concerts, that might cause temporary hearing loss. Temporary
hearing loss might cause unsafe volumes to sound normal.
Individual susceptibility to noise-induced hearing loss and
potential hearing problem varies. Additionally, the amount of
sound produced by a portable audio device varies depending on
the nature of the sound, the device settings, and the headphones
that are used. As a result, there is no single volume setting that is
appropriate for everyone or for every combination of sound,
settings and equipment.
•
Do not listen at any volume that causes you discomfort. If you
experience ringing in your ears, hear muffled speech or experience
any temporary hearing difficulty after listening to your portable audio
device, discontinue use and consult your doctor.
You can obtain additional information on this subject from the
following sources:
You should follow some commonsense recommendations when
using any portable audio device:
•
Set the volume in a quiet environment and select the lowest volume at
which you can hear adequately.
•
When using headphones, turn the volume down if you cannot hear the
people speaking near you or if the person sitting next to you can hear
what you are listening to.
145
Download from Www.Somanuals.com. All Manuals Search And Download.
National Institute for Occupational Safety and Health (NIOSH)
395 E Street, S.W.
American Academy of Audiology
11730 Plaza American Drive, Suite 300
Reston, VA 20190
Suite 9200
Patriots Plaza Building
Voice: (800) 222-2336
Washington, DC 20201
Email: [email protected]
Voice: 1-800-35-NIOSH (1-800-356-4647)
1-800-CDC-INFO (1-800-232-4636)
Outside the U.S. 513-533-8328
Email: [email protected]
Internet: http://www.audiology.org
National Institute on Deafness and Other Communication Disorders
National Institutes of Health
31 Center Drive, MSC 2320
Internet: http://www.cdc.gov
Bethesda, MD 20892-2320
1-888-232-6348 TTY
Email: [email protected]
Internet: http://www.nidcd.nih.gov/
Operating Environment
Remember to follow any special regulations in force in any area
and always switch your phone off whenever it is forbidden to use
it, or when it may cause interference or danger.
When connecting the phone or any accessory to another device,
read its user's guide for detailed safety instructions. Do not
connect incompatible products.
Health and Safety Information
Download from Www.Somanuals.com. All Manuals Search And Download.
146
As with other mobile radio transmitting equipment, users are
advised that for the satisfactory operation of the equipment and
for the safety of personnel, it is recommended that the
equipment should only be used in the normal operating position
(held to your ear with the antenna pointing over your shoulder if
you are using an external antenna).
•
•
Should turn the phone OFF immediately if there is any reason to
suspect that interference is taking place;
Should read and follow the directions from the manufacturer of your
implantable medical device. If you have any questions about using
your wireless phone with such a device, consult your health care
provider.
UsingYourPhoneNearOtherElectronicDevices
For more information see:
Most modern electronic equipment is shielded from radio
frequency (RF) signals. However, certain electronic equipment
may not be shielded against the RF signals from your wireless
phone. Consult the manufacturer to discuss alternatives.
FCC Hearing-Aid Compatibility (HAC)
Regulations for Wireless Devices
On July 10, 2003, the U.S. Federal Communications Commission
(FCC) Report and Order in WT Docket 01-309 modified the
exception of wireless phones under the Hearing Aid Compatibility
Act of 1988 (HAC Act) to require digital wireless phones be
compatible with hearing-aids.
Implantable Medical Devices
A minimum separation of six (6) inches should be maintained
between a handheld wireless phone and an implantable medical
device, such as a pacemaker or implantable cardioverter
defibrillator, to avoid potential interference with the device.
The intent of the HAC Act is to ensure reasonable access to
telecommunications services for persons with hearing
disabilities.
Persons who have such devices:
•
Should ALWAYS keep the phone more than six (6) inches from their
implantable medical device when the phone is turned ON;
Should not carry the phone in a breast pocket;
While some wireless phones are used near some hearing devices
(hearing aids and cochlear implants), users may detect a
buzzing, humming, or whining noise. Some hearing devices are
more immune than others to this interference noise, and phones
also vary in the amount of interference they generate.
•
•
Should use the ear opposite the implantable medical device to
minimize the potential for interference;
147
Download from Www.Somanuals.com. All Manuals Search And Download.
The wireless telephone industry has developed a rating system
for wireless phones, to assist hearing device users find phones
that may be compatible with their hearing devices. Not all phones
have been rated. Phones that are rated have the rating on their
box or a label located on the box.
A sum of 5 is considered acceptable for normal use. A sum of 6
is considered for best use.
The ratings are not guarantees. Results will vary depending on
the user's hearing device and hearing loss. If your hearing device
happens to be vulnerable to interference, you may not be able to
use a rated phone successfully. Trying out the phone with your
hearing device is the best way to evaluate it for your personal
needs.
T3
+
T2
=
5
M3
+
M2
=
5
In the above example, if a hearing aid meets the M2 level rating
and the wireless phone meets the M3 level rating, the sum of the
two values equal M5. This is synonymous for T ratings. This
should provide the hearing aid user with "normal usage" while
using their hearing aid with the particular wireless phone.
"Normal usage" in this context is defined as a signal quality that
is acceptable for normal operation.
M-Ratings: Phones rated M3 or M4 meet FCC requirements and
are likely to generate less interference to hearing devices than
phones that are not labeled. M4 is the better/higher of the two
ratings.
T-Ratings: Phones rated T3 or T4 meet FCC requirements and are
likely to generate less interference to hearing devices than
phones that are not labeled. T4 is the better/higher of the two
ratings.
The M mark is intended to be synonymous with the U mark. The
T mark is intended to be synonymous with the UT mark. The M
and T marks are recommended by the Alliance for
Telecommunications Industries Solutions (ATIS). The U and UT
marks are referenced in Section 20.19 of the FCC Rules.
Hearing devices may also be rated. Your hearing device
manufacturer or hearing health professional may help you find
this rating. Higher ratings mean that the hearing device is
relatively immune to interference noise. The hearing aid and
wireless phone rating values are then added together.
Health and Safety Information
Download from Www.Somanuals.com. All Manuals Search And Download.
148
The HAC rating and measurement procedure are described in the
American National Standards Institute (ANSI) C63.19 standard.
Potentially Explosive Environments
Switch your phone off when in any area with a potentially
explosive atmosphere and obey all signs and instructions. Sparks
in such areas could cause an explosion or fire resulting in bodily
injury or even death.
Other Medical Devices
If you use any other personal medical devices, consult the
manufacturer of your device to determine if it is adequately
shielded from external RF energy. Your physician may be able to
assist you in obtaining this information. Switch your phone off in
health care facilities when any regulations posted in these areas
instruct you to do so. Hospitals or health care facilities may be
using equipment that could be sensitive to external RF energy.
Users are advised to switch the phone off while at a refueling
point (service station). Users are reminded of the need to observe
restrictions on the use of radio equipment in fuel depots (fuel
storage and distribution areas), chemical plants or where blasting
operations are in progress.
Vehicles
Areas with a potentially explosive atmosphere are often but not
always clearly marked. They include below deck on boats,
chemical transfer or storage facilities, vehicles using liquefied
petroleum gas (such as propane or butane), areas where the air
contains chemicals or particles, such as grain, dust or metal
powders, and any other area where you would normally be
advised to turn off your vehicle engine.
RF signals may affect improperly installed or inadequately
shielded electronic systems in motor vehicles. Check with the
manufacturer or its representative regarding your vehicle. You
should also consult the manufacturer of any equipment that has
been added to your vehicle.
Posted Facilities
Emergency Calls
Switch your phone off in any facility where posted notices require
you to do so.
This phone, like any wireless phone, operates using radio
signals, wireless and landline networks as well as user-
programmed functions, which cannot guarantee connection in all
conditions. Therefore, you should never rely solely on any
wireless phone for essential communications (medical
emergencies, for example).
149
Download from Www.Somanuals.com. All Manuals Search And Download.
Remember, to make or receive any calls the phone must be
switched on and in a service area with adequate signal strength.
Emergency calls may not be possible on all wireless phone
networks or when certain network services and/or phone
features are in use. Check with local service providers.
Restricting Children's access to your Phone
Your phone is not a toy. Children should not be allowed to play
with it because they could hurt themselves and others, damage
the phone or make calls that increase your phone bill.
FCC Notice and Cautions
FCC Notice
To make an emergency call:
1. If the phone is not on, switch it on.
The phone may cause TV or radio interference if used in close
proximity to receiving equipment. The FCC can require you to
stop using the phone if such interference cannot be eliminated.
2. Key in the emergency number for your present location (for
example, 911 or other official emergency number).
Emergency numbers vary by location.
Vehicles using liquefied petroleum gas (such as propane or
butane) must comply with the National Fire Protection Standard
(NFPA-58). For a copy of this standard, contact the National Fire
Protection Association:
3. Press the
key.
If certain features are in use (call barring, for example), you may
first need to deactivate those features before you can make an
emergency call. Consult this document and your local cellular
service provider.
NFPA (National Fire Protection Agency)
1 Batterymarch Park
When making an emergency call, remember to give all the
necessary information as accurately as possible. Remember that
your phone may be the only means of communication at the
scene of an accident; do not cut off the call until given
permission to do so.
Quincy, Massachusetts
USA 02169-7471
Internet: http://www.nfpa.org
Health and Safety Information
Download from Www.Somanuals.com. All Manuals Search And Download.
150
Cautions
•
•
Switch your phone off before boarding an aircraft. The use of wireless
phone in aircraft is illegal and may be dangerous to the aircraft's
operation.
Any changes or modifications to your phone not expressly
approved in this document could void your warranty for this
equipment, and void your authority to operate this equipment.
Only use approved batteries, antennas and chargers. The use of
any unauthorized accessories may be dangerous and void the
phone warranty if said accessories cause damage or a defect to
the phone.
Failure to observe these instructions may lead to the suspension or
denial of telephone services to the offender, or legal action, or both.
Product Performance
Getting the Most Out of Your Signal Reception
The quality of each call you make or receive depends on the
signal strength in your area. Your phone informs you of the
current signal strength by displaying a number of bars next to the
signal strength icon. The more bars displayed, the stronger the
signal.
Although your phone is quite sturdy, it is a complex piece of
equipment and can be broken. Avoid dropping, hitting, bending
or sitting on it.
Other Important Safety Information
•
Only qualified personnel should service the phone or install the phone
in a vehicle. Faulty installation or service may be dangerous and may
invalidate any warranty applicable to the device.
If you're inside a building, being near a window may give you
better reception.
Understanding the Power Save Feature
•
•
•
Check regularly that all wireless phone equipment in your vehicle is
mounted and operating properly.
If your phone is unable to find a signal after searching, a Power
Save feature is automatically activated. If your phone is active, it
periodically rechecks service availability or you can check it
yourself by pressing any key.
Do not store or carry flammable liquids, gases or explosive materials in
the same compartment as the phone, its parts or accessories.
For vehicles equipped with an air bag, remember that an air bag
inflates with great force. Do not place objects, including both installed
or portable wireless equipment in the area over the air bag or in the air
bag deployment area. If wireless equipment is improperly installed and
the air bag inflates, serious injury could result.
Anytime the Power Save feature is activated, a message displays
on the screen. When a signal is found, your phone returns to
standby mode.
151
Download from Www.Somanuals.com. All Manuals Search And Download.
Understanding How Your Phone Operates
•
Avoid exposing your phone and accessories to rain or liquid spills. If
your phone does get wet, immediately turn the power off and remove
the battery. If it is inoperable, call Customer Care for service.
Your phone is basically a radio transmitter and receiver. When it's
turned on, it receives and transmits radio frequency (RF) signals.
When you use your phone, the system handling your call controls
the power level. This power can range from 0.006 watts to 0.2
watts in digital mode.
Availability of Various Features/Ring Tones
Many services and features are network dependent and may
require additional subscription and/or usage charges. Not all
features are available for purchase or use in all areas.
Downloadable Ring Tones may be available at an additional cost.
Other conditions and restrictions may apply. See your service
provider for additional information.
Maintaining Your Phone's Peak Performance
For the best care of your phone, only authorized personnel should
service your phone and accessories. Faulty service may void the
warranty.
Battery Standby and Talk Time
There are several simple guidelines to operating your phone
properly and maintaining safe, satisfactory service.
Standby and talk times will vary depending on phone usage
patterns and conditions. Battery power consumption depends on
factors such as network configuration, signal strength, operating
temperature, features selected, frequency of calls, and voice,
data, and other application usage patterns.
•
To ensure that the Hearing Aid Compatibility rating for your phone is
maintained, secondary transmitters such as Bluetooth and WLAN
components must be disabled during a call.
•
If your phone is equipped with an external antenna, hold the phone
with the antenna raised, fully-extended and over your shoulder.
Battery Precautions
•
Avoid dropping the cell phone. Dropping it, especially on a hard
surface, can potentially cause damage to the phone and battery. If you
suspect damage to the phone or battery, take it to a service center for
inspection.
•
•
•
Do not hold, bend or twist the phone's antenna, if applicable.
Do not use the phone if the antenna is damaged.
If your phone is equipped with an internal antenna, obstructing the
internal antenna could inhibit call performance.
•
•
Never use any charger or battery that is damaged in any way.
Do not modify or remanufacture the battery as this could result in
serious safety hazards.
•
Speak directly into the phone's receiver.
Health and Safety Information
Download from Www.Somanuals.com. All Manuals Search And Download.
152
•
If you use the phone near the network's base station, it uses less
power; talk and standby time are greatly affected by the signal
strength on the cellular network and the parameters set by the
network operator.
•
Misuse or use of incompatible phones, batteries, and charging devices
could result in damage to the equipment and a possible risk of fire,
explosion, leakage, or other serious hazard.
•
•
Extreme temperatures will affect the charging capacity of your battery:
it may require cooling or warming first.
•
•
Follow battery usage, storage and charging guidelines found in the
user’s guide.
Do not leave the battery in hot or cold places, such as in a car in
summer or winter conditions, as you will reduce the capacity and
lifetime of the battery. Always try to keep the battery at room
temperature. A phone with a hot or cold battery may temporarily not
work, even when the battery is fully charged. Li-ion batteries are
particularly affected by temperatures below
Battery charging time depends on the remaining battery charge and
the type of battery and charger used. The battery can be charged and
discharged hundreds of times, but it will gradually wear out. When the
operation time (talk time and standby time) is noticeably shorter than
normal, it is time to buy a new battery.
0 °C (32 °F).
•
•
If left unused, a fully charged battery will discharge itself over time.
•
•
Do not place the phone in areas that may get very hot, such as on or
near a cooking surface, cooking appliance, iron, or radiator.
Use only Samsung-approved batteries and recharge your battery only
with Samsung-approved chargers. When a charger is not in use,
disconnect it from the power source. Do not leave the battery
connected to a charger for more than a week, since overcharging may
shorten its life.
Do not get your phone or battery wet. Even though they will dry and
appear to operate normally, the circuitry could slowly corrode and
pose a safety hazard.
•
Do not use incompatible cell phone batteries and chargers. Some Web
sites and second-hand dealers, not associated with reputable
manufacturers and carriers, might be selling incompatible or even
counterfeit batteries and chargers. Consumers should purchase
manufacturer or carrier recommended products and accessories. If
unsure about whether a replacement battery or charger is compatible,
contact the manufacturer of the battery or charger.
•
Do not short-circuit the battery. Accidental short-circuiting can occur
when a metallic object (coin, clip or pen) causes a direct connection
between the + and - terminals of the battery (metal strips on the
battery), for example when you carry a spare battery in a pocket or
bag. Short-circuiting the terminals may damage the battery or the
object causing the short-circuiting.
•
Do not permit a battery out of the phone to come in contact with metal
objects, such as coins, keys or jewelry.
153
Download from Www.Somanuals.com. All Manuals Search And Download.
•
•
Do not crush, puncture or put a high degree of pressure on the battery
as this can cause an internal short-circuit, resulting in overheating.
•
Do not store the phone in cold areas. When the phone warms up to its
normal operating temperature, moisture can form inside the phone,
which may damage the phone's electronic circuit boards.
Dispose of used batteries in accordance with local regulations. In some
areas, the disposal of batteries in household or business trash may be
prohibited. For safe disposal options for Li-Ion batteries, contact your
nearest Samsung authorized service center. Always recycle. Do not
dispose of batteries in a fire.
•
•
Do not drop, knock or shake the phone. Rough handling can break
internal circuit boards.
Do not use harsh chemicals, cleaning solvents or strong detergents to
clean the phone. Wipe it with a soft cloth slightly dampened in a mild
soap-and-water solution.
Care and Maintenance
•
•
•
Do not paint the phone. Paint can clog the device's moving parts and
prevent proper operation.
Your phone is a product of superior design and craftsmanship
and should be treated with care. The suggestions below will help
you fulfill any warranty obligations and allow you to enjoy this
product for many years.
Do not put the phone in or on heating devices, such as a microwave
oven, a stove or a radiator. The phone may explode when overheated.
If your phone is equipped with an external antenna, use only the
supplied or an approved replacement antenna. Unauthorized antennas
or modified accessories may damage the phone and violate
regulations governing radio devices.
•
•
•
•
•
Keep the phone and all its parts and accessories out of the reach of
small children.
Keep the phone dry. Precipitation, humidity and liquids contain
minerals that will corrode electronic circuits.
•
If the phone, battery, charger or any accessory is not working properly,
take it to your nearest qualified service facility. The personnel there
will assist you, and if necessary, arrange for service.
Do not use the phone with a wet hand. Doing so may cause an electric
shock to you or damage to the phone.
Do not use or store the phone in dusty, dirty areas, as its moving parts
may be damaged.
Do not store the phone in hot areas. High temperatures can shorten the
life of electronic devices, damage batteries, and warp or melt certain
plastics.
Health and Safety Information
Download from Www.Somanuals.com. All Manuals Search And Download.
154
Section 20: Warranty Information
Standard Limited Warranty
removed or made illegible; (c) any plastic surfaces or other
externally exposed parts that are scratched or damaged due to
normal use; (d) malfunctions resulting from the use of Product in
conjunction with accessories, products, or ancillary/peripheral
equipment not furnished or approved by SAMSUNG; (e) defects or
damage from improper testing, operation, maintenance,
installation, or adjustment; (f) installation, maintenance, and
service of Product, or (g) Product used or purchased outside the
United States or Canada.
What is Covered and For How Long?
SAMSUNG TELECOMMUNICATIONS AMERICA, LLC ("SAMSUNG")
warrants to the original purchaser ("Purchaser") that SAMSUNG's
Phones and accessories ("Products") are free from defects in
material and workmanship under normal use and service for the
period commencing upon the date of purchase and continuing for
the following specified period of time after that date:
This Limited Warranty covers batteries only if battery capacity
falls below 80% of rated capacity or the battery leaks, and this
Limited Warranty does not cover any battery if (i) the battery has
been charged by a battery charger not specified or approved by
SAMSUNG for charging the battery, (ii) any of the seals on the
battery are broken or show evidence of tampering, or (iii) the
battery has been used in equipment other than the SAMSUNG
phone for which it is specified.
Phone
1 Year
Batteries
1 Year
Leather Case
Holster
90 Days
90 Days
1 Year
Other Phone Accessories
What is Not Covered? This Limited Warranty is conditioned upon
proper use of Product by Purchaser. This Limited Warranty does
not cover: (a) defects or damage resulting from accident, misuse,
abuse, neglect, unusual physical, electrical or electromechanical
stress, or modification of any part of Product, including antenna,
or cosmetic damage; (b) equipment that has the serial number
What are SAMSUNG's Obligations? During the applicable warranty
period, SAMSUNG will repair or replace, at SAMSUNG's sole
option, without charge to Purchaser, any defective component
part of Product. To obtain service under this Limited Warranty,
Purchaser must return Product to an authorized phone service
155
Download from Www.Somanuals.com. All Manuals Search And Download.
facility in an adequate container for shipping, accompanied by
Purchaser's sales receipt or comparable substitute proof of sale
showing the date of purchase, the serial number of Product and
the sellers' name and address. To obtain assistance on where to
deliver the Product, call Samsung Customer Care at 1-888-987-
4357. Upon receipt, SAMSUNG will promptly repair or replace the
defective Product. SAMSUNG may, at SAMSUNG's sole option,
use rebuilt, reconditioned, or new parts or components when
repairing any Product or replace Product with a rebuilt,
reconditioned or new Product. Repaired/replaced leather cases,
pouches and holsters will be warranted for a period of ninety (90)
days. All other repaired/replaced Product will be warranted for a
period equal to the remainder of the original Limited Warranty on
the original Product or for 90 days, whichever is longer. All
replaced parts, components, boards and equipment shall
become the property of SAMSUNG.
OR OTHERWISE, OF ANY KIND WHATSOEVER WITH RESPECT TO
THE PRODUCT, INCLUDING BUT NOT LIMITED TO:
•
THE MERCHANTABILITY OF THE PRODUCT OR ITS FITNESS FOR ANY
PARTICULAR PURPOSE OR USE;
•
•
•
WARRANTIES OF TITLE OR NON-INFRINGEMENT;
DESIGN, CONDITION, QUALITY, OR PERFORMANCE OF THE PRODUCT;
THE WORKMANSHIP OF THE PRODUCT OR THE COMPONENTS
CONTAINED THEREIN; OR
•
COMPLIANCE OF THE PRODUCT WITH THE REQUIREMENTS OF ANY
LAW, RULE, SPECIFICATION OR CONTRACT PERTAINING THERETO.
NOTHING CONTAINED IN THE INSTRUCTION MANUAL SHALL BE
CONSTRUED TO CREATE AN EXPRESS WARRANTY OF ANY KIND
WHATSOEVER WITH RESPECT TO THE PRODUCT. ALL IMPLIED
WARRANTIES AND CONDITIONS THAT MAY ARISE BY OPERATION
OF LAW, INCLUDING IF APPLICABLE THE IMPLIED WARRANTIES
OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR
PURPOSE, ARE HEREBY LIMITED TO THE SAME DURATION OF
TIME AS THE EXPRESS WRITTEN WARRANTY STATED HEREIN.
SOME STATES/PROVINCES DO NOT ALLOW LIMITATIONS ON HOW
LONG AN IMPLIED WARRANTY LASTS, SO THE ABOVE LIMITATION
MAY NOT APPLY TO YOU. IN ADDITION, SAMSUNG SHALL NOT BE
LIABLE FOR ANY DAMAGES OF ANY KIND RESULTING FROM THE
PURCHASE, USE, OR MISUSE OF, OR INABILITY TO USE THE
PRODUCT OR ARISING DIRECTLY OR INDIRECTLY FROM THE USE
If SAMSUNG determines that any Product is not covered by this
Limited Warranty, Purchaser must pay all parts, shipping, and
labor charges for the repair or return of such Product.
WHAT ARE THE LIMITS ON SAMSUNG'S WARRANTY/LIABILITY?
EXCEPT AS SET FORTH IN THE EXPRESS WARRANTY CONTAINED
HEREIN, PURCHASER TAKES THE PRODUCT "AS IS," AND
SAMSUNG MAKES NO WARRANTY OR REPRESENTATION AND
THERE ARE NO CONDITIONS, EXPRESS OR IMPLIED, STATUTORY
Warranty Information
Download from Www.Somanuals.com. All Manuals Search And Download.
156
OR LOSS OF USE OF THE PRODUCT OR FROM THE BREACH OF
THE EXPRESS WARRANTY, INCLUDING INCIDENTAL, SPECIAL,
CONSEQUENTIAL OR SIMILAR DAMAGES, OR LOSS OF
IN CONJUNCTION WITH THE PRODUCT. SAMSUNG MAKES NO
WARRANTIES OR REPRESENTATIONS AND THERE ARE NO
CONDITIONS, EXPRESS OR IMPLIED, STATUTORY OR
ANTICIPATED PROFITS OR BENEFITS, OR FOR DAMAGES ARISING
FROM ANY TORT (INCLUDING NEGLIGENCE OR GROSS
OTHERWISE, AS TO THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE OR SUITABILITY OF ANY THIRDPARTY SOFTWARE
OR EQUIPMENT, WHETHER SUCH THIRD-PARTY SOFTWARE OR
EQUIPMENT IS INCLUDED WITH THE PRODUCT DISTRIBUTED BY
SAMSUNG OR OTHERWISE, INCLUDING THE ABILITY TO
INTEGRATE ANY SUCH SOFTWARE OR EQUIPMENT WITH THE
PRODUCT. THE QUALITY, CAPABILITIES, OPERATIONS,
PERFORMANCE AND SUITABILITY OF ANY SUCH THIRD-PARTY
SOFTWARE OR EQUIPMENT LIE SOLELY WITH THE PURCHASER
AND THE DIRECT VENDOR, OWNER OR SUPPLIER OF SUCH
THIRD-PARTY SOFTWARE OR EQUIPMENT, AS THE CASE MAY BE.
NEGLIGENCE) OR FAULT COMMITTED BY SAMSUNG, ITS AGENTS
OR EMPLOYEES, OR FOR ANY BREACH OF CONTRACT OR FOR
ANY CLAIM BROUGHT AGAINST PURCHASER BY ANY OTHER
PARTY. SOME STATES/PROVINCES DO NOT ALLOW THE
EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL
DAMAGES, SO THE ABOVE LIMITATION OR EXCLUSION MAY NOT
APPLY TO YOU. THIS WARRANTY GIVES YOU SPECIFIC LEGAL
RIGHTS, AND YOU MAY ALSO HAVE OTHER RIGHTS, WHICH VARY
FROM STATE TO STATE/PROVINCE TO PROVINCE. THIS LIMITED
WARRANTY SHALL NOT EXTEND TO ANYONE OTHER THAN THE
ORIGINAL PURCHASER OF THIS PRODUCT AND STATES
PURCHASER'S EXCLUSIVE REMEDY. IF ANY PORTION OF THIS
LIMITED WARRANTY IS HELD ILLEGAL OR UNENFORCEABLE BY
REASON OF ANY LAW, SUCH PARTIAL ILLEGALITY OR
UNENFORCEABILITY SHALL NOT AFFECT THE ENFORCEABILITY
FOR THE REMAINDER OF THIS LIMITED WARRANTY WHICH
PURCHASER ACKNOWLEDGES IS AND WILL ALWAYS BE
CONSTRUED TO BE LIMITED BY ITS TERMS OR AS LIMITED AS
THE LAW PERMITS. THE PARTIES UNDERSTAND THAT THE
PURCHASER MAY USE THIRD-PARTY SOFTWARE OR EQUIPMENT
This Limited Warranty allocates risk of Product failure between
Purchaser and SAMSUNG, and SAMSUNG's Product pricing
reflects this allocation of risk and the limitations of liability
contained in this Limited Warranty. The agents, employees,
distributors, and dealers of SAMSUNG are not authorized to make
modifications to this Limited Warranty, or make additional
warranties binding on SAMSUNG. Accordingly, additional
statements such as dealer advertising or presentation, whether
oral or written, do not constitute warranties by SAMSUNG and
should not be relied upon.
157
Download from Www.Somanuals.com. All Manuals Search And Download.
only; provided that the backup copy must include all copyright or
other proprietary notices contained on the original.
End User License Agreement for Software
IMPORTANT. READ CAREFULLY: This End User License Agreement
("EULA") is a legal agreement between you (either an individual
or a single entity) and Samsung Electronics Co., Ltd. for software
owned by Samsung Electronics Co., Ltd. and its affiliated
companies and its third party suppliers and licensors that
accompanies this EULA, which includes computer software and
may include associated media, printed materials, "online" or
electronic documentation ("Software"). BY CLICKING THE "I
ACCEPT" BUTTON (OR IF YOU BYPASS OR OTHERWISE DISABLE
THE "I ACCEPT", AND STILL INSTALL, COPY, DOWNLOAD,
ACCESS OR OTHERWISE USE THE SOFTWARE), YOU AGREE TO
BE BOUND BY THE TERMS OF THIS EULA. IF YOU DO NOT
ACCEPT THE TERMS IN THIS EULA, YOU MUST CLICK THE
"DECLINE" BUTTON, DISCONTINUE USE OF THE SOFTWARE.
2. RESERVATION OF RIGHTS AND OWNERSHIP. Samsung reserves
all rights not expressly granted to you in this EULA. The Software
is protected by copyright and other intellectual property laws and
treaties. Samsung or its suppliers own the title, copyright and
other intellectual property rights in the Software. The Software is
licensed, not sold.
3. LIMITATIONS ON END USER RIGHTS. You may not reverse
engineer, decompile, disassemble, or otherwise attempt to
discover the source code or algorithms of, the Software (except
and only to the extent that such activity is expressly permitted by
applicable law notwithstanding this limitation), or modify, or
disable any features of, the Software, or create derivative works
based on the Software. You may not rent, lease, lend, sublicense
or provide commercial hosting services with the Software.
1. GRANT OF LICENSE. Samsung grants you the following rights
provided that you comply with all terms and conditions of this
EULA: You may install, use, access, display and run one copy of
the Software on the local hard disk(s) or other permanent storage
media of one computer and use the Software on a single
computer or a mobile device at a time, and you may not make
the Software available over a network where it could be used by
multiple computers at the same time. You may make one copy of
the Software in machine-readable form for backup purposes
4. CONSENT TO USE OF DATA. You agree that Samsung and its
affiliates may collect and use technical information gathered as
part of the product support services related to the Software
provided to you, if any, related to the Software. Samsung may
use this information solely to improve its products or to provide
customized services or technologies to you and will not disclose
this information in a form that personally identifies you.
Warranty Information
Download from Www.Somanuals.com. All Manuals Search And Download.
158
5. UPGRADES. This EULA applies to updates, supplements and
add-on components (if any) of the Software that Samsung may
provide to you or make available to you after the date you obtain
your initial copy of the Software, unless we provide other terms
along with such upgrade. To use Software identified as an
upgrade, you must first be licensed for the Software identified by
Samsung as eligible for the upgrade. After upgrading, you may
no longer use the Software that formed the basis for your
upgrade eligibility.
8. TERMINATION. This EULA is effective until terminated. Your
rights under this License will terminate automatically without
notice from Samsung if you fail to comply with any of the terms
and conditions of this EULA. Upon termination of this EULA, you
shall cease all use of the Software and destroy all copies, full or
partial, of the Software.
9. DISCLAIMER OF WARRANTIES. You expressly acknowledge
and agree that use of the Software is at your sole risk and that
the entire risk as to satisfactory quality, performance, accuracy
and effort is with you. TO THE MAXIMUM EXTENT PERMITTED BY
APPLICABLE LAW, THE SOFTWARE IS PROVIDED "AS IS" AND
WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY KIND, AND
SAMSUNG AND ITS LICENSORS (COLLECTIVELY REFERRED TO AS
"SAMSUNG" FOR THE PURPOSES OF SECTIONS 9, 10 and 11)
HEREBY DISCLAIM ALL WARRANTIES AND CONDITIONS WITH
RESPECT TO THE SOFTWARE, EITHER EXPRESS, IMPLIED OR
STATUTORY, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED
WARRANTIES AND/OR CONDITIONS OF MERCHANTABILITY, OF
SATISFACTORY QUALITY OR WORKMANLIKE EFFORT, OF FITNESS
FOR A PARTICULAR PURPOSE, OF RELIABILITY OR AVAILABILITY,
OF ACCURACY, OF LACK OF VIRUSES, OF QUIET ENJOYMENT,
AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS. SAMSUNG
DOES NOT WARRANT AGAINST INTERFERENCE WITH YOUR
ENJOYMENT OF THE SOFTWARE, THAT THE FUNCTIONS
CONTAINED IN THE SOFTWARE WILL MEET YOUR
6. SOFTWARE TRANSFER. You may not transfer this EULA or the
rights to the Software granted herein to any third party unless it
is in connection with the sale of the mobile device which the
Software accompanied. In such event, the transfer must include
all of the Software (including all component parts, the media and
printed materials, any upgrades, this EULA) and you may not
retain any copies of the Software. The transfer may not be an
indirect transfer, such as a consignment. Prior to the transfer, the
end user receiving the Software must agree to all the EULA
terms.
7. EXPORT RESTRICTIONS. You acknowledge that the Software is
subject to export restrictions of various countries. You agree to
comply with all applicable international and national laws that
apply to the Software, including the U.S. Export Administration
Regulations, as well as end user, end use, and destination
restrictions issued by U.S. and other governments.
159
Download from Www.Somanuals.com. All Manuals Search And Download.
REQUIREMENTS, THAT THE OPERATION OF THE SOFTWARE WILL
BE UNINTERRUPTED OR ERROR-FREE, OR THAT DEFECTS IN THE
SOFTWARE WILL BE CORRECTED. NO ORAL OR WRITTEN
INFORMATION OR ADVICE GIVEN BY SAMSUNG OR A SAMSUNG
AUTHORIZED REPRESENTATIVE SHALL CREATE A WARRANTY.
SHOULD THE SOFTWARE PROVE DEFECTIVE, YOU ASSUME THE
ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR
CORRECTION. SOME JURISDICTIONS DO NOT ALLOW THE
EXCLUSION OF IMPLIED WARRANTIES OR LIMITATIONS ON
APPLICABLE STATUTORY RIGHTS OF A CONSUMER, SO THESE
EXCLUSIONS AND LIMITATIONS MAY NOT APPLY TO YOU.
OR OTHERWISE) AND EVEN IF SAMSUNG HAS BEEN ADVISED OF
THE POSSIBILITY OF SUCH DAMAGES. SOME JURISDICTIONS DO
NOT ALLOW THE LIMITATION OF LIABILITY FOR PERSONAL
INJURY, OR OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO
THIS LIMITATION MAY NOT APPLY TO YOU.
11. LIMITATION OF LIABILITY. Notwithstanding any damages that
you might incur for any reason whatsoever (including, without
limitation, all damages referenced herein and all direct or general
damages in contract or anything else), the entire liability of
Samsung under any provision of this EULA and your exclusive
remedy hereunder shall be limited to the greater of the actual
damages you incur in reasonable reliance on the Software up to
the amount actually paid by you for the Software or US$5.00. The
foregoing limitations, exclusions and disclaimers (including
Sections 9, 10 and 11) shall apply to the maximum extent
permitted by applicable law, even if any remedy fails its essential
purpose.
10. EXCLUSION OF INCIDENTAL, CONSEQUENTIAL AND CERTAIN
OTHER DAMAGES. TO THE EXTENT NOT PROHIBITED BY LAW, IN
NO EVENT SHALL SAMSUNG BE LIABLE FOR PERSONAL INJURY,
OR ANY INCIDENTAL, SPECIAL, INDIRECT OR CONSEQUENTIAL
DAMAGES WHATSOEVER, OR FOR LOSS OF PROFITS, LOSS OF
DATA, BUSINESS INTERRUPTION, OR FOR ANY PECUNIARY
DAMAGES OR LOSSES, ARISING OUT OF OR RELATED TO YOUR
USE OR INABILITY TO USE THE SOFTWARE, THE PROVISION OF
OR FAILURE TO PROVIDE SUPPORT OR OTHER SERVICES,
INFORMATION, SOFTWARE, AND RELATED CONTENT THROUGH
THE SOFTWARE OR OTHERWISE ARISING OUT OF THE USE OF
THE SOFTWARE, OR OTHERWISE UNDER OR IN CONNECTION
WITH ANY PROVISION OF THIS EULA, HOWEVER CAUSED,
REGARDLESS OF THE THEORY OF LIABILITY (CONTRACT, TORT
12. U.S. GOVERNMENT END USERS. The Software is licensed
only with "restricted rights" and as "commercial items"
consisting of "commercial software" and "commercial software
documentation" with only those rights as are granted to all other
end users pursuant to the terms and conditions herein.
Warranty Information
Download from Www.Somanuals.com. All Manuals Search And Download.
160
13. APPLICABLE LAW. This EULA is governed by the laws of
TEXAS, without regard to conflicts of laws principles. This EULA
shall not be governed by the UN Convention on Contracts for the
International Sale of Goods, the application of which is expressly
excluded. If a dispute, controversy or difference is not amicably
settled, it shall be finally resolved by arbitration in Seoul, Korea in
accordance with the Arbitration Rules of the Korean Commercial
Arbitration Board. The award of arbitration shall be final and
binding upon the parties.
To avoid unintended information leaks and other problems of this
sort, it is recommended that the device be returned to Samsung’s
Customer Care Center for an Extended File System (EFS) Clear
which will eliminate all user memory and return all settings to
default settings. Please contact the Samsung Customer Care
Center for details.
Important!: Please provide warranty information (proof of purchase) to
Samsung’s Customer Care Center in order to provide this service
at no charge. If the warranty has expired on the device, charges
may apply.
14. ENTIRE AGREEMENT; SEVERABILITY. This EULA is the entire
agreement between you and Samsung relating to the Software
and supersedes all prior or contemporaneous oral or written
communications, proposals and representations with respect to
the Software or any other subject matter covered by this EULA. If
any provision of this EULA is held to be void, invalid,
unenforceable or illegal, the other provisions shall continue in full
force and effect.
Customer Care Center:
1000 Klein Rd.
Plano, TX 75074
Toll Free Tel: 1.888.987.HELP (4357)
Samsung Telecommunications America, LLC:
1301 East Lookout Drive
Precautions for Transfer and Disposal
Richardson, Texas 75082
If data stored on this device is deleted or reformatted using the
standard methods, the data only appears to be removed on a
superficial level, and it may be possible for someone to retrieve
and reuse the data by means of special software.
Phone: 1-800-SAMSUNG (726-7864)
Important!: If you are using a handset other than a standard numeric keypad,
dial the numbers listed in brackets.
161
Download from Www.Somanuals.com. All Manuals Search And Download.
Phone: 1-888-987-HELP (4357)
©
2009 Samsung Telecommunications America. All rights
reserved.
No reproduction in whole or in part allowed without prior written
approval. Specifications and availability subject to change
without notice.
Warranty Information
Download from Www.Somanuals.com. All Manuals Search And Download.
162
Index
Browser
How the Browser Keys Work 100
Launching 99
Video Gallery 89
Camera
Brightness 88
Options 78
Photo Gallery 88
Camera Mode 19
Camera Options
Size 79
Numerics
2-Sec Pause 43
A
Using Links 100
Adding Contacts
Dial Method 41
Menu Method 42
Adjust
C
Call Functions
Answering a Call 25
Call Log 27
Making a Call — Number Entry
Dialing 20
Making a Call — Speed Dialing 22
Making a Call — Voice Dialing 23
Call Settings 120
Auto Retry 122
Call Answer 121
TTY Mode 122
Voice Privacy 123
Camcorder
Options 83
Key Tone 118
Alerts 118
B
Card Memory
Battery
Formatting 132
Travel Adapter 6
Clock Format 115
Contacts
Charging 6
Installing 5
Removing 5
Brew
Applications Shopping and
Downloading 101
Launching 101
Adding 41
Deleting 50
163
Download from Www.Somanuals.com. All Manuals Search And Download.
Editing 42
Finding 39
Wallpaper 115
H
HAC 147
Memory Info 50
Open Menu 39
Saving a Number After a Call 45
Contacts Groups
Add 49
Add Contacts 47
Erase 50
Rename 49
Create a Draft Message 61
Create and Send Text Messages 51
D
Dialing Font Size 116
Display
Backlight 16
Dialogue Boxes 16
Icons 16
E
Health and Safety Information 135
Editing Contacts
I
K
Assigning a Ringtone 44
Names and Numbers 42
Emergency Calls 20
Key 118
Keypad
Backlight 16
F
Finding Contacts
L
Shortcut Key Method 39
Formatting a microSD Card 132
Formatting Music Memory 133
G
Language Setting 124
M
Memo Pad
Review, Edit, and Erase Memos 107
Memory Card
Formatting 132
Remove 9
Layout 15
Display Setting
Dialing Font 116
Display Settings
Backlight 116
Banner 116
Clock Format 115
Gallery, video 89
Getting Started
Memory Card (Optional)
Install 8
Understanding this User Manual 4
Go back one menu 33
164
Download from Www.Somanuals.com. All Manuals Search And Download.
Message Settings
Text 65
M-Ratings 148
Music Memory
Formatting 133
Phone Info 133
Icon Glossary 134
Version 134
Messages
N
Create a Draft Message 61
Receive 52
Settings 64
Types 51
microSD
Formatting 132
Install 8
Remove 9
Mode
Camera 19
Handsfree 18
Lock 19
Silent 18
Speakerphone 18
Standby 17
Phone Memory
Navigation Key Shortcuts 33
P
Personal Organizer
Alarm Clock 107
Calculator 110
World Time 109
Phone
Command Keys 14
Display 15
Features 10
Modes 17
View, Open, Front 10
View, Open, Rear 13
View,Closed 12
Phone Safety 146
Phone Settings
Airplane Mode 123
Language 124
Security 124
Photos
Sending 90
Picture Messages
Receiving 57
Send in Camera Mode 53
Settings 66
Vibrate 18
165
Download from Www.Somanuals.com. All Manuals Search And Download.
Setup
Location 120
Shortcut to menus 34
Sound Settings
Alerts 118
One-Touch Dialing 22
Three Touch Dialing 22
Standard Limited Warranty
Tools
Tools Menu 102
R
Receive Pic. Messages 57
Receive Text Messages 52
Record Memos 94
Removing the Battery 5
Return to Last Menu 33
Ringer Types, Assigning 117
Roaming 32
T-Ratings 148
TTY Mode 122
U
Use the Travel Adapter 6
V
S
SAR values 135
Save Pictures 78
Screen Layouts 76
Security Settings 124
Change Lock 125
Emergency # 125
Lock Phone 124
Master Reset 126
Restrictions 127
Send Text Messages 51
Set Time 128
Settings
Version 134
Voice Dialing 23
Voice Memo
Voicemail
T
Taking pictures and videos 74
Text
Text Conventions 4
Time, Set 128
Setup 8
VoiceSignal
Call Settings 120
Phone Settings 123
Security Settings 124
Settings, Picture Messages 66
W
Wallpaper 115
Warranty Information 155
166
Download from Www.Somanuals.com. All Manuals Search And Download.
|