MODEL
LC-80LE857E LC-70LE857E LC-60LE855E
LC-80LE857RU LC-70LE857RU LC-60LE855K
LC-80LE857K LC-70LE857K LC-60LE857E
LC-80LE858E LC-70LE858E LC-60LE857RU
LC-60LE858E
OPERATION MANUAL
LCD COLOUR TELEVISION
Download from Www.Somanuals.com. All Manuals Search And Download.
[ ENGLISH ]
Introduction
Dear SHARP customer
Thank you for your purchase of the SHARP LCD colour TV product. To ensure
safety and many years of trouble-free operation of your product, please read
Important safety precautions carefully before using this product.
Contents
Introduction.......................................................................1
Dear SHARP customer................................................1
Contents......................................................................1
Important safety precautions.......................................2
Supplied accessories ..................................................4
Optional accessories...................................................4
Preparation .......................................................................5
Attaching the stand unit (for 60/70 inch models).........5
Attaching the stand unit (for 80 inch models)..............6
Using the remote control unit......................................7
Part names and functions................................................8
TV (front/side view)......................................................8
TV (rear view) ...............................................................8
Remote control unit.....................................................9
Quick guide.....................................................................10
Operation overview....................................................10
Inserting the CA card into the CI module ..................12
Recording CAM PIN setting ......................................12
CI plus 1.3 Standard..................................................12
Using the HOME screen............................................13
Using the Menu screen..............................................14
Using Software keyboard ..........................................14
Initial auto installation....................................................15
Initial auto installation................................................15
Watching TV....................................................................19
Daily operation...........................................................19
Favourite Channel Information ..................................21
Operator profile .........................................................21
EPG ...........................................................................22
Teletext ......................................................................25
Connecting external devices.........................................27
Introduction to connections.......................................27
Video connections.....................................................28
Audio connections.....................................................30
AQUOS LINK...................................................................31
Enjoying 3D image viewing............................................68
Before using the 3D glasses......................................68
Preparing for the 3D glasses .....................................69
Using the 3D glasses.................................................70
Cautions for 3D image viewing..................................72
Display format for 3D and 2D images .......................73
Viewing 3D images ....................................................74
Configuring the TV settings to enhance 3D image
viewing ....................................................................75
Specifications — 3D glasses (sold separately)..........77
Troubleshooting — 3D Images ..................................77
Appendix .........................................................................78
Troubleshooting.........................................................78
Updating your TV via DVB-T/T2/C/S*/S2*.................80
Getting update information........................................80
Information on the software licence for this
Controlling HDMI devices using AQUOS LINK .........31
AQUOS LINK connection ..........................................32
AQUOS LINK setup...................................................33
Operating an AQUOS LINK device............................33
Using a Smartphone with the TV...............................35
Basic adjustment............................................................36
Picture settings..........................................................36
Audio settings............................................................39
Power save settings ..................................................40
View settings .............................................................41
Individual setting — PIN............................................44
Individual setting — Clock.........................................44
Individual setting — Language..................................45
Useful viewing functions................................................46
Optional features settings..........................................46
Additional features.....................................................49
Other useful features .....................................................51
USB-recording...........................................................51
How to operate USB-recording.................................52
USB media/Home network........................................55
USB device compatibility ..........................................58
Home network server compatibility...........................58
Selecting the picture size for video mode .................58
Connecting a PC.............................................................59
Connecting a PC .......................................................59
Displaying a PC image on the TV..............................59
PC control of the TV ..................................................62
Network setup ................................................................64
Connecting to the network........................................64
Net TV..............................................................................66
What is Net TV?.........................................................66
Operations in Net TV .................................................66
product....................................................................81
Updating your TV via USB/network...........................81
Trademarks................................................................82
Software licences for Net TV.....................................83
Disclaimers for services using the Internet................83
Specifications............................................................84
Specifications (Wireless LAN USB adapter)..............85
Environmental specifications.....................................86
Mounting the TV on a wall.........................................86
Wall mount kit specifications.....................................87
Dimensional drawings ...............................................89
EU Energy Label for Televisions ................................91
* 857 series only
NOTE
• The illustrations and the OSD in this operation manual
are for explanation purposes and may vary slightly from
the actual operations.
• The examples used throughout this manual are based
on 60 inch models.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Important safety precautions
• Cleaning—Unplug the AC cord from the AC outlet before cleaning the product. Use a
damp cloth to clean the product. Do not use liquid cleaners or aerosol cleaners.
• Use a soft damp cloth to gently wipe the panel when it is dirty. To protect the panel,
do not use a chemical cloth to clean it. Chemicals may cause damage or cracks in
the cabinet of the TV.
• Headphones—Do not set the volume at a high level. Hearing experts advise against
extended listening at high volume levels.
• Do not display a still picture for a long time, as this could cause an afterimage to
remain.
• There is power consumption always if main plug is connected.
• Water and moisture—Do not use the product near water, such as
bathtub, washbasin, kitchen sink, laundry tub, swimming pool and
in a wet basement.
• Do not place vases or any other water-filled containers on this
product. The water may spill onto the product causing fire or electric
shock.
• Servicing—Do not attempt to service the product yourself. Removing covers can
expose you to high voltage and other dangerous conditions. Request a qualified
person to perform servicing.
The LCD panel is a very high technology product, giving you fine picture
details.
Due to the very large number of pixels, occasionally a few non-active pixels
may appear on the screen as a fixed point of blue, green, red or yellow. This is
within product specifications and does not constitute a fault.
• Stand—Do not place the product on an unstable cart, stand, tripod
or table. Doing so can cause the product to fall, resulting in serious
personal injuries as well as damage to the product. Use only a cart,
stand, tripod, bracket or table recommended by the manufacturer or
sold with the product. When mounting the product on a wall, be sure
to follow the manufacturer’s instructions. Use only the mounting
hardware recommended by the manufacturer.
• When relocating the product placed on a cart, it must be moved with utmost care.
Sudden stops, excessive force and uneven floor surface can cause the product to fall
from the cart.
Precautions when transporting the TV
When transporting the TV, never carry it by putting pressure
onto the display. Be sure to always carry the TV by two people
(80 inch: three people) holding it with two hands—one hand on
each side of the TV.
• Ventilation—The vents and other openings in the cabinet are designed for ventilation.
Do not cover or block these vents and openings since insufficient ventilation can
cause overheating and/or shorten the life of the product. Do not place the product on
a bed, sofa, rug or other similar surface, since they can block ventilation openings.
This product is not designed for built-in installation; do not place the product in an
enclosed place such as a bookcase or rack, unless proper ventilation is provided or
the manufacturer’s instructions are followed.
Caring for the cabinet
• Use a soft cloth (cotton, flannel, etc.) and gently wipe the surface of the cabinet.
• Using a chemical cloth (wet/dry sheet type cloth, etc.) may deform the components
of the main unit cabinet or cause cracking.
• Wiping with a hard cloth or using strong force may scratch the surface of the cabinet.
• If the cabinet is very dirty, wipe with a soft cloth (cotton, flannel, etc.) soaked in
neutral detergent diluted with water and thoroughly wrung out, and then wipe with a
soft dry cloth.
• Avoid using benzene, thinner, and other solvents, as these may deform the cabinet
and cause the paint to peel off.
• The LCD panel used in this product is made of glass. Therefore, it can break when
the product is dropped or impact applied. If the LCD panel is broken, be careful not
to be injured by broken glass.
• Heat sources—Keep the product away from heat sources such
as radiators, heaters, stoves and other heat-generating products
(including amplifiers).
• Do not apply insecticides or other volatile liquids. Also, do not allow the cabinet to
remain in contact with rubber or vinyl products for a long period of time. Plasticizers
inside the plastic may cause the cabinet to deform and cause the paint to peel off.
• To prevent fire, never place any type of candle or naked flames on
the top or near the TV set.
• To prevent fire or shock hazard, do not place the AC cord under the
TV set or other heavy items.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Caring for the front panel
Handling the 3D glasses
• Do not drop, exert pressure on, or step on the 3D glasses. Doing so may damage the
glass section, which may result in injury.
• Be careful not to trap your finger in the hinge section of the 3D glasses. Doing so
may result in injury.
• Turn off the main power and unplug the AC cord from the wall outlet before handling.
• Gently wipe the surface of the front panel with a soft cloth (cotton, flannel, etc.). To
protect the front panel, do not use a dirty cloth, liquid cleaners, or a chemical cloth
(wet/dry sheet type cloth, etc.). This may damage the surface of the front panel.
• Pay special attention when children are using this product.
Using the 3D glasses
• Wiping with a hard cloth or using strong force may scratch the surface of the front
panel.
• Do not drop, exert pressure on, or step on the 3D glasses. Doing so may damage the
glass section, which may result in the risk of injury.
• Use the 3D glasses only for the specified purpose.
• Do not move around while wearing the 3D glasses. The surrounding area appears
dark, which may result in falling or other accidents that may cause injury.
• Use a soft damp cloth to gently wipe the front panel when it is really dirty (It may
scratch the surface of the front panel when wiped strongly).
• If the front panel is dusty, use an anti-static brush, which is commercially available, to
clean it.
Caring for the 3D glasses
WARNING
• Use only the cloth provided with the 3D glasses to clean the lenses. Remove dust
and soil from the cloth. Any dust or other soiling on the cloth may result in scratches.
Do not use solvents such as benzene or thinners as doing so may damage the
coating.
To prevent the spread of fire, keep candles or other open flames
away from this product at all times.
• When cleaning the 3D glasses, take care not to allow water or other fluids to come
into contact with the glasses.
• Always store the 3D glasses in the case provided when not in use.
• When storing the 3D glasses, avoid very humid or hot locations.
Viewing 3D images
• If you experience dizziness, nausea, or other discomfort while viewing 3D images,
discontinue use and rest your eyes.
3D glasses (AN-3DG40, sold separately)
Prevention of accidental ingestion
• Keep the accessory out of the reach of small children. Small children can accidentally
swallow these parts.
• If a child accidentally swallows any of these parts, seek immediate medical attention.
Do not disassemble
• Do not disassemble or modify the 3D glasses except when recycling the batteries.
Do not modify the 3D glasses.
• Do not use the 3D glasses if they are cracked or broken.
Caution for lithium battery
• Batteries must not be exposed to excessive heat such as direct sunlight or fire.
• Replace only with the same or equivalent type of battery. The battery may explode if
improperly replaced.
• Take care not to reverse the battery poles (+ and –) when loading the battery. Follow
the correct procedure when loading the battery. Loading the battery incorrectly may
damage the battery or cause it to leak battery fluid, which could result in a fire, injury
or damage.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Supplied accessories
Optional accessories
The listed optional accessories are available for this LCD colour TV. Please
purchase them at your nearest shop.
• Additional optional accessories may be available in the near future. When purchasing,
please read the newest catalogue for compatibility and check the availability.
Remote control unit ( x 1)
“AAA” size battery ( x 2)
Part
No.
1
Part name
Notes
number
Wall mount bracket
(For 60/70 inch models)
The mark “c” indicates the location of
the centre of the TV screen.
AN-52AG4
Pages 7 and 9
Page 7
Refer to the operation manual of the 3D
glasses for details regarding usage.
2
3D glasses
AN-3DG40
Stand unit ( x 1)
For 60/70 inch models
For 80 inch models
Page 5
Page 6
Wireless LAN USB adapter
(WN8522D 7-JU) ( x 1)
AC cord ( x 1)
(For 80 inch models only)
Page 65
Page 10
Initial setup guide
(printed document)
Important safety
precautions
(printed document)
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Attaching the stand unit (for 60/70 inch models)
•
Before attaching (or detaching) the stand, unplug the AC cord.
3 Insert the stand into the openings on the bottom
of the TV (hold the stand so it will not drop from
the edge of the base area).
5 Attaching the stand cover.
• Before performing work, spread cushioning over the
surface on which you will be laying the TV. This will
prevent it from being damaged.
1 Insert the stand cover.
2 Insert and tighten the M4 screw (length:
8 mm) into the holes of the stand cover.
• Tighten the screw by pressing the bottom of the
stand base to the TV side.
• Make sure that the stand is firmly inserted into the
TV. Improper installation may result in tilting of the
TV set.
• Be sure that two or more persons attach the stand.
CAUTION
• Attach the stand in the correct direction.
Soft cushion
M4 screw
•
Be sure to follow the instructions. Incorrect installation
of the stand may result in the TV falling over.
After attaching the stand to the TV, do not hold the
stand when you put up, set up, move or lay down the TV.
•
• Do not remove the stand from the TV unless using a
wall mount bracket to mount it.
1 Confirm that there are 9 screws (four M6 screws,
four M5 screws and one M4 screw) supplied
with the stand unit.
2 Attach the supporting post to the stand base.
1 Insert the claws of the supporting post into
the stand base.
4 Insert and tighten the M5 screws (length: 14 mm)
NOTE
into the holes on the rear of the TV.
• To detach the stand unit, perform the steps in reverse
order.
2 Secure the post and the base using the M6
screws (length: 16 mm) and a screwdriver.
M5 screws
• A screwdriver is not supplied with this product.
• In the installation procedure, be careful not to catch
your fingers between the TV set and the floor.
• The TV can be rotated up to 20 degrees to the right and
left.
M6 screws
NOTE
• Tighten the screws to the holes of the mark “b”.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Attaching the stand unit (for 80 inch models)
•
Before attaching (or detaching) the stand, unplug the AC cord.
3 Insert the stand into the openings on the bottom
of the TV (hold the stand so it will not drop from
the edge of the base area).
5 Attaching the stand cover.
• Before performing work, spread cushioning over the
surface on which you will be laying the TV. This will
prevent it from being damaged.
1 Insert the stand cover.
2 Insert and tighten the M4 screws (length:
8 mm) into the holes of the stand cover.
• Tighten the screws by pressing the bottom of
the stand base to the TV side.
• Make sure that the stand is firmly inserted into the
TV. Improper installation may result in tilting of the
TV set.
• Be sure that two or more persons attach the stand.
CAUTION
• Instead of using a soft cushion, the cardboard box
that the TV is packed in can be assembled and
used as a work table (refer to the instructions on the
box to assemble the work table).
• Attach the stand in the correct direction.
M4 screws
•
Be sure to follow the instructions. Incorrect installation
of the stand may result in the TV falling over.
After attaching the stand to the TV, do not hold the
stand when you put up, set up, move or lay down the TV.
•
Soft cushion
• Do not remove the stand from the TV unless using a
wall mount bracket to mount it.
1 Confirm that there are 14 screws (eight M6
screws, four M5 screws and two M4 screws)
supplied with the stand unit.
2 Attach the supporting post to the stand base.
1 Insert the claws of the supporting post into
the stand base.
2 Secure the post and the base using the M6
screws (length: 20 mm) and a screwdriver.
M6 screws
NOTE
4 Insert and tighten the M5 screws (length: 14 mm)
• To detach the stand unit, perform the steps in reverse
order.
into the holes on the rear of the TV.
M5 screws
• A screwdriver is not supplied with this product.
• In the installation procedure, be careful not to catch
your fingers between the TV set and the floor.
• The TV can be rotated up to 20 degrees to the right and
left.
NOTE
• Tighten the screws to the holes of the mark “b”.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Preparation
Using the remote control unit
Inserting the batteries
Angle of the remote control unit
Before using the TV for the first time, insert the two supplied “AAA” size
batteries. When the batteries become depleted and the remote control unit fails
to operate, replace the batteries with new “AAA” size batteries.
Use the remote control unit by pointing it towards the remote control sensor.
Objects between the remote control unit and sensor may prevent proper
operation.
1 Open the battery cover.
5 m
2 Insert the two supplied “AAA” size batteries.
• Place batteries with their terminals corresponding to the (e)
and (f) indications in the battery compartment.
Remote control sensor
3 Close the battery cover.
Cautions regarding the remote control unit
• Do not expose the remote control unit to shock. In
addition, do not expose the remote control unit to
liquids, and do not place in an area with high humidity.
• Do not install or place the remote control unit under
direct sunlight. The heat may cause deformation of the
unit.
• The remote control unit may not work properly if the
remote control sensor of the TV is under direct sunlight
or strong lighting. In such cases, change the angle of
the lighting or the TV, or operate the remote control unit
closer to the remote control sensor.
CAUTION
Improper use of batteries can result in chemical leakage or explosion. Be sure to
follow the instructions below.
• Do not mix batteries of different types. Different types of batteries have different
characteristics.
• Do not mix old and new batteries. Mixing old and new batteries can shorten the life of
new batteries or cause chemical leakage in old batteries.
• Remove batteries as soon as they have worn out. Chemicals that leak from batteries
can cause a rash. If you find any chemical leakage, wipe thoroughly with a cloth.
• The batteries supplied with this product may have a shorter life expectancy due to
storage conditions.
• If you will not be using the remote control unit for an extended period of time, remove
the batteries from it.
Note on disposing batteries
The batteries provided contain no harmful materials such as cadmium, lead or
mercury.
Regulations concerning used batteries stipulate that batteries may no longer be
thrown out with the household rubbish. Deposit any used batteries free of charge
into the designated collection containers set up at commercial businesses.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Part names and functions
TV (front/side view)
TV (rear view) — continued
a (Standby/ON)
MENU (Menu)
MAIN POWER
switch*3
SD CARD
(VIDEO STORE) slot
b (Input source)
OUTPUT (Headphones/
AUDIO (L/R)) terminal*4
:r/s
(Programme
[Channel])
Illumination LED*1
USB 1 port
i+/- (Volume)
HDMI 1 (HDMI/ARC)
terminal
OPC sensor (Page 36)
Remote control sensor (Page 7)
HDMI 2 (HDMI) terminal
HDMI 3 (HDMI) terminal
This panel emits a signal towards the 3D glasses you wear when viewing 3D images.
Refer to page 76 for details.
RS-232C terminal
I 3D mode: Blue illumination
HDMI 4 (HDMI/MHL)
terminal
2D mode: White illumination
PC terminal
EXT 1 (RGB) terminal
TV (rear view)
EXT 2 (VIDEO/AUDIO
(L/R)) terminal
C.I. (COMMON
INTERFACE) slot
EXT 3 (Component/
AUDIO (L/R)) terminal
K When the MAIN POWER switch is turned off (a), the amount of electric power consumed will
be reduced to 0.01 W or less. However, unlike when unplugging the AC cord, the power is not
completely disconnected.
L When the headphone is connected to the OUTPUT terminal, the audio can be output from the
speakers (Page 48).
USB 3 (WIRELESS LAN) port
USB 2 (HDD) port
ETHERNET (10/100) terminal
Satellite antenna terminal
HDMI 2/PC AUDIO (L/R)
jack*2
DIGITAL AUDIO OUTPUT
terminal
Antenna terminal
WARNING
(857 series only)
• Excessive sound pressure from earphones and headphones can cause hearing loss.
• Do not set the volume at a high level. Hearing experts advise against extended listening at high
volume levels.
J The HDMI 2 and PC terminals can both use the same audio input terminal (HDMI 2/PC AUDIO
(L/R)). However, the proper item must be selected in the “Audio select” menu (refer to page 47 for
details).
NOTE
• Use a product with the specified dimensions for optimal connection to HDMI cable/USB device.
− HDMI: Body: (depth) 12 mm or less/(length) 32 mm or less
− USB: Body: (depth) 10 mm or less/(length) 57 mm or less
Connector: (depth) 7 mm or less
Important information:
Satellite services are only available for the 857 model series.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Part names and functions
Remote control unit
UAPP (Page 26)
1
>a (Standby/On) (Page 19)
2 ATV
Access conventional analogue TV mode.
7
8
9
7 (Sound mode) (Page 20)
14
15
Display the MHP application list (858
series only).
Select a sound multiplex mode.
1
2
i+/- (Volume)
Increase/decrease TV volume.
ECO (Standard/Advanced/Off)
(Page 40)
Select “Energy save” setting.
DTV
Access digital TV mode.
e (Mute)
TV sound on/off.
SAT
3
I m (Teletext) (Page 25)
ATV: Display analogue teletext.
DTV/SAT: Select MHEG-5 or teletext for
DTV/SAT.
Access satellite mode.
0 D (HOME)
Display the “HOME” screen for enjoying
Internet connection and Home network
functions, as well as performing settings
for the TV.
RADIO
DTV/SAT: Switch between radio and
data mode.
O :r/s
4
• When only data broadcasting (no radio
broadcasting) is transmitted by DVB,
the radio broadcasting will be skipped.
ATV/DTV/SAT: Select the TV channel.
AQUOS NET+: Scrolls pages up/down.
Q 3D (Pages 68_77)
Select between 3D and 2D image
viewing.
PMENU
3 EXT MEDIA buttons
5
6
16
17
“Menu” screen on/off (Page 14).
EXT MEDIA buttons are used for AQUOS W a/b/c/d (Cursor)
LINK functions and USB-recording
functions, etc.
• AQUOS LINK (Pages 31_34):
Interactively operate compatible
system devices using a single remote
control unit.
• USB-recording (Pages 51_54):
Record a programme you are
watching.
A EPG (Pages 22_24)
Select a desired item.
DTV/SAT: Display the EPG screen.
7
8
9
18
19
20
;
S6 (Return)
Execute a command.
ATV/DTV/SAT: Return to the previous
screen.
ATV/DTV/SAT: Display “CH list” when no
other “Menu” screen is running.
• “CH list” may not be displayed even
by pressing ; when executing the
MHP application (Page 26). If so, you
can display “CH list” from “HOME” >
“CH list”.
10
AQUOS NET+: Return to the previous
page (This may not function for some
services).
11
12
13
21
DButtons for useful operations
4 Numeric buttons 0_9
[ (Subtitle) (Pages 25 and 45)
Switch subtitle languages on/off.
Set the channel. Enter desired numbers.
Set the page in teletext mode.
Inputting letters with the numeric
buttons is only available with MHP
services (858 series only).
• When the five Nordic countries
(Sweden, Norway, Finland, Denmark
or Iceland) are selected in the country
setting from initial auto installation
(Page 15), DTV services are four digits.
When another country is selected,
DTV services are three digits.
E >
22
23
24
ATV/DTV/SAT: Exit the “Menu” screen.
AQUOS NET+: Return to the start page.
k (Reveal hidden teletext) (Page 25)
1 (Subpage) (Page 25)
3 (Freeze/Hold) (Page 25)
Freeze a moving image on the screen.
Teletext: Stop updating teletext pages
automatically or release the hold mode.
RCONTROL (Pages 52, 54, 57 and 66)
Display a panel to operate some
functions on the screen.
Tp (Display information) (Page 20)
Display the station information (channel
number, signal, etc.) on the screen.
FR/G/Y/B (Colour) buttons
The coloured buttons are
P. INFO
correspondingly used to select the
coloured items on the screen (e.g., EPG,
MHEG-5, MHP*, teletext).
* MHP is available on the 858 series
only.
Display programme information
transmitted through digital video
broadcasting (DTV/SAT only).
5
A (Flashback)
Return to the previously selected
channel or external input.
Y b (INPUT) (Page 19)
Important information:
Select an input source.
6 AV MODE (Page 36)
Satellite services are only available for
the 857 model series.
Select audio/video settings.
f (Wide mode) (Pages 46, 58 and 59)
Select a wide mode.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick guide
Operation overview
Follow the steps below one by one when using the TV. Some steps may not be necessary
depending on your TV installation and connection.
1. Preparation — Connecting the TV
2. Preparation — Setting the TV
w For 60/70 inch models
w For 80 inch models
p
q
r
Press a on the TV (Page 19).
Run the initial auto installation (Page 15).
n
o
n
w Language setting
o
w Home/Store setting
w Country setting
q
q
w PIN setting
NOTE
w Channel search setting
• The cable tie can be moved from
to
.
• Digital search
− Terrestrial
− Cable
• Analogue search
• Satellite search
• Place the TV close to the AC
outlet, and keep the power
plug within reach.
• Product shape varies in some
countries.
Plug the standard DIN45325 plug (IEC 169-2)
75 q coaxial cable.
Connect the satellite antenna cable.
Insert a CA card into the CI slot to watch scrambled
broadcasts (Page 12).
n
o
p
Plug in the AC cord.
Check that the MAIN POWER switch on the rear of the TV
is turned on (;).
q
r
Start searching channels
Congratulations!
Now you can watch TV.
p
*Important information:
• If necessary, adjust the antenna to attain maximum signal
reception (Page 18).
Satellite services are only available for the 857 model series.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick guide
3. Daily operation
1 Turn on/off the TV
4. Advanced features
5. Enjoy additional features
1 Use USB-recording function
1 Connect external devices
(Pages 52_54)
(Page 19)
Connection overview
(Pages 27_32)
• Be sure to turn off the TV and
any devices before making any
connections.
• You can turn on/off the
power using both the
remote control and the
TV.
Switch input sources
(Page 19)
2 Switch between digital, satellite and
analogue broadcast
2 Enjoy photos, music and video stored
in USB media/Home network
(Page 19)
(Pages 55_58)
3 Change channels
3 Display a PC image on the TV screen
(Page 19)
• You can also select a
channel from “HOME” >
“CH list”.
(Pages 59_63)
4 Select a programme using EPG
4 Enjoy internet service* with the TV
(Pages 22_24)
• If the MAIN POWER
switch is switched off,
the EPG data will be
lost.
(Pages 13 and 64_67)
* The following service is now
available:
• YouTube™ (Page 13)
• Net TV (Pages 66–67)
2 Adjust TV settings and enjoy internet
service
(Pages 36_50)
• You can launch Internet
connection and Home
network functions, as
well as perform settings
for the TV from the
5 Watch 3D images
(Pages 68_77)
• Some menu items are greyed
out in 3D mode. This is not a
malfunction.
“HOME” screen.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick guide
NOTE
Inserting the CA card into the CI
module
CI plus 1.3 Standard
• It takes a few minutes to certify the licence key when
you insert a CA card into the CI+ compatible CI module
for the first time. This process may fail when there is no
antenna input or you have never run “Auto installation”.
• The CI+ compatible CI module sometimes upgrades its
firmware. You may not receive any TV images before
upgrading. You can only use the power button during
upgrading.
CI Plus is an advanced development of the DVB
Common Interface Standard.
In order to receive coded digital stations, a common
interface module (CI module) and a CA card must be
inserted in the CI slot of the TV.
1 Regarding security
There are some regulations in recording functions.
The playback of encrypted programmes is
strongly dependent on which CA module is
used. The playback of encrypted recordings may
sometimes not be possible, or only during limited
time. Programme providers, who use the CI Plus
standard, can assign different rights for their
broadcast programmes.
• Copy protected content may not be output or may be
output with a copy control signal. The protect icon* is
displayed when P.INFO is pressed while watching copy
protected contents.
* Protect icon: X
• If the TV displays an update confirmation message for
the CA card while receiving CI+ compatible broadcasts,
follow the screen prompts.
1 Carefully insert the CI module in the CI slot with
Exercise caution when using USB-recording to
record broadcast programmes (Pages 51–54).
the contact side forward.
• Make sure that the CI module is properly inserted.
• If the old CAM is used, authentication may fail. In such
cases, contact the contracted service provider.
2 The logo on the CI module must be facing
outward from the rear of the TV.
2 Operator service list management (Operator
profile)
Checking CI module information
Recording CAM PIN setting
Go to “TV Menu” > “Setup” > “Option” >
“CI setting” > “CI menu”.
• This menu is only available for digital stations.
• The content of this menu depends on the provider
of the CI module.
Under the 1.3 specification the CAM may provide
the channel listing parameters (channel number,
frequency etc.) and these can be updated while in
use.
When a CAM PIN code is required for recording a
programme, it is necessary to enter the CAM PIN
code in advance.
Refer to “Operator profile” on page 21.
1 Go to “TV Menu” > “Setup” > “Option” >
Module
“CI setting” > “Recording CAM PIN setting”.
General information on CI module displays.
2 Enter the CAM PIN code.
Menu
NOTE
Adjustment parameters of each CA card displays.
• If a PIN code is not entered or is entered incorrectly, the
programme will not be able to be recorded/played back.
Enquiry
You can input numerical values such as passwords
here.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick guide
Using the HOME screen
You can easily launch this “HOME” screen to enjoy Internet connection and
Home network functions and to perform settings for the TV.
Tips:
HOME menu contents
This product is embedded with LC Font technology, which was developed
by SHARP Corporation for clearly displaying easy-to-read characters on LCD
screens.
LCFONT
Main information
display zone
Featured and
recommended
function zone
1 Display the HOME screen
Other function icons
Press D (HOME) and the “HOME” screen will be displayed.
2 Select an item
Main information display zone
Various information, including the time, currently displayed programming, and current
setting status are shown. Switching between the current setting status can be done
using the coloured buttons.
Press a/b/c/d to select the desired service or menu, and then press ;.
See the right column for details on the operations in the “HOME” screen.
Featured and recommended function zone
Available and recommended functions are shown.
3 Exit the HOME screen
Other function icons
Other function icons are shown.
The operation will exit the “HOME” screen if you press D (HOME) before it is
completed.
Regarding the instructions in the manual
In this manual, the following expression is often used in order to simplify
instructions.
• Go to “TV Menu” > “Setup” > ...
This indicates how to navigate through the Menu screen using the a/b/c/d
and ; buttons.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick guide
Using the Menu screen
Using Software keyboard
You need to call up the OSD to perform settings for the TV. The OSD for the
settings is called “Menu”. The “Menu” enables various settings and adjustments.
Use the software keyboard when you need to input text.
6
7
8
Display the Menu screen
Go to “TV Menu”.
n
• You can also display the Menu screen via the HOME menu screen (Page 13).
1
2
Char.Set
Selecting in the Menu
Selecting options
Press c/d to select the desired menu,
and then press ;. Press 6 to return to
the previous menu category.
n
9
Caps
Done
Press a/b or c/d to
q
configure the control for
improving TV viewing, and
then press ;.
Clear
3
10
Press c/d to select the desired sub-
o
p
menu, and then press ;.
EXAMPLE
Press a/b to select the item you want to
select/adjust, and then press ;.
11
4
5
Cancel
Delete
SP
Backlight
Menu
Cursor Left
Caps
Char.Set
Cursor Right
CH list
Setup
:Enter
:Back
1
Char. Set
6 Input cursor
0 Clear
Erases the character
string.
Changes character
Press c/d to move the
Picture
set into the alphabet,
numbers, symbols, etc.
cursor when highlighted.
• When the cursor is
somewhere in a line:
The character string to
the right of the cursor
will be erased.
• When the cursor is at
the right end of a line:
The entire line will be
erased.
7
Input field
AV mode
2 Caps
Changes characters to
capital/lower case.
3 Done
Confirm the entry.
4 Cancel
The text you enter is
displayed as you type
it in.
OPC
Yes
No
[Off]
Backlight
8 Character
NOTE
3D brightness boost
Input characters by
using these buttons.
[Middle]
• Refer to the guide display
below the menu bar to see
when to press the ; button.
Abort input and close
the software keyboard.
9
?
Put a line break.
About the guide display
Q Delete
5 R/G/Y/B (Colour)
buttons
The guide display below the menu bar shows
operations for the OSD.
• The bar above is an operational guide for the
remote control unit. The bar will change in
accordance with each menu setting screen.
If the cursor is at the
right end of a line,
this erases text one
character at a time.
• You can also delete
text by pressing 6
on the remote control
unit.
Selects the coloured
items on the screen.
CH list
Setup
:Select
:Enter
:Back
NOTE
• “Menu” options differ according to the selected input modes, but the operating
procedures are the same.
• Items with 4 cannot be selected for various reasons.
• Some items cannot be selected depending on signal types, optional settings or
connected devices.
NOTE
• Depending on the application, there may be a different software keyboard than the one
indicated above.
• When inputting letters in MHP services, use the numeric buttons on the remote control
unit (858 series only).
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial auto installation
4 Setting the country.
6 Starting channel search.
Initial auto installation
Press a/b/c/d to select your country or area, and
then press ;.
Digital search
When the TV is powered on for the first time after
purchase, the initial auto installation wizard appears.
Follow the menus and make the necessary settings
one after another.
• This setting screen only appears during the initial
auto installation.
Analogue search
Satellite search
NOTE
• Some functions may not display or be selectable
depending on the country setting or cable provider
selection.
Confirm the following before turning on
the power
Press a/b to select “Digital search”, “Analogue
search” or “Satellite search”, and then press ;.
• (857 series only) After performing “Digital search”
or “Analogue search”, the screen switches to the
“Satellite search” setting. You should then execute
“Yes” if you want to search for satellite channels.
• To watch both digital broadcasts and analogue
broadcasts, you should perform “Digital search” or
“Analogue search” from “Auto installation” under
the “Setup” menu (Page 41).
• When you select “Satellite search”, only satellite
broadcasts will be searched.
• If you want to search for more broadcasts, execute
“Additional search” from the “Programme setup”
menu (Pages 41_43).
5 Setting the PIN.
E
Is the antenna cable connected?
1 Press c/d to select “Yes”, and then press
E
Is the AC cord plugged in?
;.
E
Is the MAIN POWER switch turned on (;)?
• When “No” is selected, the PIN code setting is
skipped.
2 Enter a four-digit number as a PIN using the
0–9 buttons.
3 Enter the same four-digit number as in step
2 to confirm.
4 Press ;.
Important information:
Satellite services are only available for the 857 model
series.
1 Press a on the TV.
• The initial auto installation wizard appears.
NOTE
2 Setting the OSD language.
Press a/b/c/d to select the desired language, and
then press ;.
• When “France” or “Italy” is selected in the country
setting, the PIN code setting cannot be skipped.
• “0000” cannot be set as the PIN code.
NOTE
• If you turn off the power on the TV while performing a
channel search, the initial auto installation wizard will
not appear. The auto installation function allows you
to execute the installation again from “TV Menu” >
“Setup” > “View setting” (Page 41).
• When the PIN code setting is skipped, the default PIN
code (“1234”) will automatically be set.
• To change the PIN setting, refer to Individual setting —
PIN (Page 44). To reset the PIN setting (PIN input will no
longer be needed), refer to Reset the PIN (Page 79).
3 Selecting the location of the TV.
HOME
STORE
• The initial auto installation wizard will abort if you leave
the TV unattended for 30 minutes before searching for
channels.
• When “Italy” or “France” is selected in the country
setting, the default age restriction value is set to 18.
Press c/d to select where you will use this TV, and
then press ;.
• The confirmation screen pops up only when
selecting “STORE”. Press c/d to select “Yes” or
“No”.
• HOME: “STANDARD” will be the default value for
the “AV mode” setting.
• STORE: “DYNAMIC (Fixed)” will be the default
value for the “AV mode” setting. If the “AV mode”
is changed, the TV will automatically switch back
to “DYNAMIC (Fixed)” when there is no operation
using the TV or remote control unit for 30 minutes.
• STORE: A demonstration image will be displayed
after initial auto installation is completed. If you
have chosen “STORE” by mistake, go to “TV
Menu” > “Setup” > “View setting” > “Reset” >
select “HOME” again.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial auto installation
I Set up “Symbol rate 2” if the cable provider uses
several symbol rates.
J Details about the “Search method” items are as
follows:
3 Press a/b to select “Search start”, and then
Digital broadcast setting
press ;.
4 Press c/d to select “Yes” to start searching
Press c/d to select “Terrestrial” or “Cable”,
and then press ;.
cable broadcasts, and then press ;.
_Channel: Extracts all information from a channel
(quick, but needs corresponding TV stations).
_Frequency: Checks every frequency in range (slow).
_Quick: All services are searched by one frequency.
This menu works only when your cable provider
provides the frequency and the network ID (e.g.,
Homing channel). When “Quick” is selected,
“Scrambled stations” is automatically set to “Yes”, and
“None” for the “Network ID” menu cannot be selected.
K Set this to register only the specified network ID
without registering any special services.
5 The TV searches for, sorts and stores all the
receivable TV stations according to their settings
and the connected antenna.
Terrestrial
Cable
• To abort the initial auto installation in progress,
press 6.
E
Searching for terrestrial broadcasts
The TV searches for, sorts and stores all the
receivable TV stations according to their settings
and the connected antenna.
• To abort the initial auto installation in progress,
press 6.
857 series only
After searching for cable channels, the screen
switches to the “Satellite search” setting (Page 17).
L The symbol rates are specified by the cable provider.
Menu
Description
Selectable items
Analogue broadcast setting
NOTE
Specifies if you
need to add pay- Yes, No
TV services.
• A region or service selection screen may display
depending on the country settings or cable providers
selections. Follow the screen prompts to make the
selections.
Scrambled
stations
The TV searches for, sorts and stores all the
receivable TV stations according to their settings
and the connected antenna.
• To abort the initial auto installation in progress,
press 6.
Specifies how
Channel,
Frequency, Quick
Search method you search for
channels.*2
From 47.0_858.0
MHz
Start frequency
857 series only
After searching for terrestrial channels, the screen
switches to the “Satellite search” setting (Page 17).
Specifies the
Network ID
857 series only
After searching for analogue channels, the screen
switches to the “Satellite search” setting (Page 17).
None, 0_65535
network.*3
E
Searching for cable broadcasts
Input the value
Symbol rate 1/
received for
1000_9000
Symbol rate 2*1
CATV.*4
To change each item to the appropriate settings:
1 Press a/b to select
the menu, and then
press ;.
2 Press a/b/c/d or
0_9 to select or input
the appropriate item/
value, and then press
;.
Scrambled stations
Search method
Start frequency
Network ID
[Yes]
QAM
16, 32, 64, 128,
256
None, 16, 32, 64,
128, 256
modulation 1
[Channel]
QAM
modulation 2
[None]
Symbol rate 1
Symbol rate 2
QAM modulation 1
QAM modulation 2
Reset
Search start
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial auto installation
E
E
“Single satellite” setting
Search start:
Searching for satellite broadcasts
(857 series only)
DVB-S/S2 channel searching.
1 Press a/b to select “Single satellite”, and then
1 Press c/d to select “Yes”, and then press ;.
• To change the settings for “Scrambled stations”,
press a/b to select the item to be reconfigured
and then perform “Search start”.
press ;.
2 Press a/b/c/d to select your favorite
Press a/b to select “Satellite search”, and then
press ;.
satellite, and then press ;.
Scrambled stations
Search start
[Yes]
Digital search
Analogue search
Satellite search
Start search?
Atlantic Bird 1
Euro Bird 1
Yes
No
• The antenna connection setting screen is displayed.
NOTE
• Follow the instructions on the screen for “2 satellites
on toneburst switchbox”, “Max. 4 satellites on DiSEqC
multiswitch” and “Communal satellite system” settings.
• To set multiple satellite channels, go to “Max. 4 satellites
on DiSEqC multiswitch”.
• When a power supply is needed for your satellite
antenna, follow the procedure below in order to supply
the voltage specified by your service provider, etc.:
Go to “TV Menu” > “Setup” > “View setting” > “Channel
settings” > “Antenna setup-DIGITAL” > “Satellite setup” >
“Change setting” > “Communal satellite system”.
Single satellite
2 The TV searches for and stores all the receivable
TV stations according to their settings and the
connected antenna.
2 satellites on toneburst switchbox
Max. 4 satellites on DiSEqC multiswitch
Communal satellite system
• Select “Yes” to sort the search result in alphabetical
order.
• To abort the initial auto installation in progress,
press 6.
NOTE
• You can select the antenna connection method from the
four types. Consult your dealers before using a method
other than “Single satellite”.
NOTE
• Scrambled stations: Specifies if you need to choose
pay-TV services.
• Follow the procedure to perform “Manual search” if you
want to configure the frequency or symbol rate and start
to search after performing the auto searching during the
initial auto installation.
− Go to “TV Menu” > “Setup” > “View setting” >
“Channel settings” > “Programme setup” > “Satellite
setting” > “Manual search”.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Initial auto installation
5 Position and align the antenna so that the
maximum possible values for “Signal strength”
and “Quality” are obtained.
E
Checking channel strength
Checking signal strength and
channel strength (DVB-T/T2/C/S*/
S2*)
4 Press a/b to select “Channel strength”, and
then press ;.
• You can input a specified frequency band using the
0_9 numeric buttons.
NOTE
• The values of “Signal strength” and “Quality” indicate
when to check the appropriate alignment of the
antenna.
If you install a DVB-T/T2/C/S/S2 antenna for the first
time or relocate it, you should adjust the alignment
of the antenna to receive a good reception while
checking the antenna setup screen.
Channel strength of DVB-T/T2
Supply voltage
Frequency
MHz
Supplying power to the antenna
Signal strength
Channel strength
* 857 series only
CH No.
You must supply power to the antenna in order
to receive digitally/terrestrially broadcast stations
after connecting the antenna cable to the antenna
terminal on the rear of the TV.
1 Go to “TV Menu” > “Setup” > “View setting” >
“Channel settings” > “Antenna setup-DIGITAL” >
“Supply voltage”.
Signal strength
1 Go to “TV Menu” > “Setup” > “View setting” >
“Channel settings” > “Antenna setup-DIGITAL”.
Current
Quality
Max.
Max.
2 Press a/b to select “Digital setup” or “Satellite
setup”, and then press ;.
Current
E
Checking signal strength
3 Press a/b to select “Signal strength”, and then
Channel strength of DVB-C
2 Press c/d to select “On”, and then press ;.
press ;.
Supply voltage
Frequency
Signal strength for DVB-T/T2/C
MHz
Signal strength
Symbol rate
Channel strength
QAM modulation
Supply voltage
Signal strength
Signal strength
Channel strength
CH No.
Signal strength
Current
Quality
Max.
Max.
Current
Quality
Max.
Max.
Current
Current
Channel strength of DVB-S/S2
Signal strength for DVB-S/S2
Signal strength
Frequency
MHz
Channel strength
Symbol rate
Signal strength
Channel strength
Band
Vert/Low
Signal strength
Signal strength
Current
Quality
Max.
Max.
Current
Quality
Max.
Max.
Current
Current
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
Daily operation
Switching between digital, satellite*
and analogue broadcasts
Selecting an external video source
Once the connection is made, press b to display
the “INPUT” screen, and then press b or a/b to
switch over to the appropriate external source with
;.
Switching on/off
Watching digital
broadcasts
Watching analogue
broadcasts
Turning on/off the power
CH list
Watching satellite
broadcasts
INPUT
TV
1 Turn on (;)/off (a) the MAIN POWER switch on
tchable
the rear of the TV (Page 8).
2 To turn on/off the TV, press a on the TV or >a
*Important information:
Satellite services are only available for the 857 model
series.
on the remote control unit.
NOTE
• You can also select an external video source from
“HOME” > “Input change”.
NOTE
• When turning off the power using the MAIN POWER
switch on the rear of the TV, EPG data will be lost.
• Only HDMI inputs which are not set for “Input skip”
(Page 47) and properly connected inputs can be selected.
NOTE
• If multiple satellite services are set, each time you press
the SAT button the channel switches as follows.
Standby mode
E
To standby mode
SAT1
SAT2
If the MAIN POWER switch on the rear of the TV is
turn on (;), you can switch it to standby by pressing
a on the TV or >a on the remote control unit.
SAT4
SAT3
E
Switching on from standby
Changing channels
From standby, press a on the TV or >a on the
remote control unit.
With :r/s
With 0_9
NOTE
• If you are not going to use this TV for a long period of
time, be sure to remove the AC cord from the AC outlet
or turn off (a) the MAIN POWER switch on the rear of
the TV (Page 8).
•
A small amount of electric power is still consumed even
when the MAIN POWER switch is turned off (a) (Page 8).
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
E
Time display in channel information
A2 TV broadcasts selection
Selectable items
STEREO, MONO
Selecting a sound mode
You can display the time information included in
DTV, SAT and teletext broadcasts.
Signal
Stereo
E
DTV/SAT mode
NOTE
Bilingual CH A, CH B, CH AB
Monaural MONO
If multi sound modes are received, each time you
press 7 the mode switches as follows.
• Skip step 1 if receiving DTV/SAT broadcasts.
1 Select a TV channel (the time information is
Audio (ENG) STEREO
NOTE
automatically captured).
L/R
L
R
LR
• When no signal is input, the sound mode will display
2 Press p. The channel display will appear on the
“MONO”.
TV.
3 Press p again within the several seconds
that the channel display is on the screen. Time
information will be shown in the lower-right
corner of the screen for several seconds.
Channel display
You can display the channel information by pressing
p on the remote control unit.
Audio (ENG) CH A
CH A CH B CH AB
Audio (ENG) MONO
4 Even when you change the TV channel, you can
display the time information with steps 2 and 3
above.
DTV mode
ATV mode
Press c/d to select L or R sound when the
STEREO or DUAL MONO screen is displayed.
Audio (ENG)
Video
Subtitle
STEREO
Off
Auto
Subtitle
Operation without a remote control unit
You can operate the menu settings using the TV
control buttons.
Audio (ENG) STEREO
MONO
L/R
L
R
LR
>> New information
I Four digit numbers (e.g., 0001) are displayed after
selecting the five Nordic countries in the country
setting or for some cable operators. Also, operator
profiles use four digits.
NOTE
• The sound mode screen disappears in six seconds.
• Selectable items vary depending on the received
broadcasts.
• When the “Audio description setting” menu is set
to “On”, the audio description sound is selected
depending on the main audio.
SAT mode
Audio (ENG)
Video
Subtitle
STEREO
Off
E
ATV mode
Each time you press 7, the mode switches as
shown in the following tables.
>> New information
NICAM TV broadcasts selection
Selectable items
NICAM STEREO, MONO
NICAM CH A, NICAM CH B, NICAM CH AB,
MONO
J Satellite channels are displayed by four digit numbers
(e.g., 0001).
K You can set four satellite stations to “SAT1”, “SAT2“,
“SAT3“, “SAT4”.
Signal
Stereo
TV control buttons
@
Remote control buttons
@
;
Bilingual
b
:r/s
a/b
d/c
Monaural NICAM MONO, MONO
i+/-
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
Selecting channels from “My favourite” list
Favourite Channel Information
1 How to move between “My favourite” list and
“CH list”.
Before installation
1 Press the ; button when you watching DTV
or SAT to bring up the “CH list”.
2 Press the d key and select “My favourite”
list.
This function allows you to group your favourite
channels in a separate list. Pre-setting “My
favourite” in advance allows you to select your
favourite channels more conveniently.
2 Move up and down the displayed channel list by
using the a/b keys then press the ; button
to select the desired channel.
NOTE
• “My Favourite” can only be used for DTV and SAT(*)
modes, a separate list will be stored for each input
source DTV, SAT1/2/3/4.
NOTE
• The maximum number of channels you can register in
“My favourite” is:
− 50 for TV broadcast which will be allocated 001-050,
as favourite channel numbers
• When watching your favourite channels via “My
favourite” list, you can directly select other favourite
channel by entering the favourite channel number on the
remote control.
− 50 for Radio broadcast which will be allocated 051-
100, as favourite channel numbers and
− 50 for Data broadcast which will be allocated 101-
150, as favourite channel numbers
* 857 series only
• Selecting the EPG function while using “My favourite”
channel list, will only show details for the favourite
channels you have added. (To view details of all
available channels via the EPG, please switch back to
“CH list” mode from “My favourite” by following the
steps shown in 1 (1) and reselect “CH List” before
pressing the EPG button.)
How to add / remove / move your favourite
channels
Press the ; button to display the on-screen
channel list.
• If you have already set your favourite channels,
you will be able to see “CH list” or “My favourite”
depending on your previous selection.
Operator profile
In case your CI Plus CAM supports Operator Profile,
your CAM will inform you and guide you through the
Operator Profile installation.
When operator's profile is added by the CAM, it will
be displayed in the CH list menu. Each profile will be
stored as an independent list in the TV.
Function buttons used to edit “My favourite”
Buttons
Description
Add to “My favourite” list or remove
You can delete operator profile you added.
from “My favourite” list.
R button
Go to “TV Menu” > “Setup” > “View setting” >
“Channel settings” > “Programme setup” >
“Operator profile management”.
The “
” mark will be added to or
removed from the selected channel.
Move channel position in “My
favourite” list. (“My favourite”
channel numbers will be sequentially
allocated.)
NOTE
B button
• The TV supports 2 operator profiles.
• Operator profile can have mixed services such as T/C/
S1/S2/S3/S4, but will only be displayed based on the
network and media type you select.
NOTE
• If you delete a channel via the “Manual adjust” option
(“TV Menu” > “Setup” > “View setting” > “Channel
settings” > “Programme setup” > “Digital setting” >
“Manual adjust”), this will be deleted from both the “CH
list” and “My favourite” list.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
EPG
Option
Genre icon setup
EPG is a programme list that is displayed on the
screen. With the EPG, you can check the schedule
for DTV/SAT/RADIO/DATA, view detailed information
about them and tune to an event currently on-air.
You can grey out or place a mark on desired genres
and smoothly search for programmes you frequently
watch.
1 Go to “TV Menu” > “Setup” > “Option” > “EPG
Useful settings for using EPG
setup” > “Genre icon setup”.
2 Press a/b to select the desired genre, and then
View setting
press ;.
EPG
E
Genre icon list
If you want to use the EPG for digital stations,
select “Yes”. The EPG data must be automatically
captured while the TV is in standby mode. After
setting to “Yes”, it may take some time to turn off
the power using the remote control unit or the TV
due to the data capture process.
Icon
Genre
Icon
Genre
Movie/Drama
Music/Ballet/Dance
News/Current
affairs
Arts/Culture
(without music)
Social/Political
issues/Economics
Education/Science/
Factual topics
Show/Game show
Sports
Go to “TV Menu” > “Setup” > “View setting” >
“Individual setting” > “Standby search” > “EPG”.
NOTE
• If the MAIN POWER switch is switched off, the EPG
Children’s/Youth
programmes
Leisure hobbies
data will be lost.
Option
3 Press a/b to select a level to pick out or
search for programmes you want to watch
(“Standard”, “Light”, “Remark”).
Display range setup
The “Display range setup” allows you to select three
types of time spans for display on the screen.
Go to “TV Menu” > “Setup” > “Option” > “EPG
setup” > “Display range setup”.
Item
Mode 1
(Wide angle)
Displays six hours of programme
information.
Mode 2
(Zoom)
Displays three hours of programme
information.
Mode 3
Changes to the EPG display format
(Vertical angle) with a vertical time span.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
4 Search a programme in a
5 Search for a programme by
Selecting a programme using EPG
The illustrations on this page are explained using three digit services.
Display/Close the EPG screen
category
date/time
Press EPG.
AM
PM
1 Press G.
1 Press Y.
2 Press a/b to select the desired
2 Press c/d to select the desired
genre, and then press ;.
time span, and then press ;.
Programme info.
Search by genre
Search by date
Timer list
3 Press a/b to select a programme
you want to watch, and then press
;.
Today
0 AM - 6 AM
Enter
6 AM - 0 PM
0 PM - 6 PM
Enter
6 PM - 0 AM
+1 Week
Back to EPG
• Refer to page 22 for the genre setting.
Movie/Drama
3 Press a/b to select the desired
News/Current affairs
Show/Game show
Sports
Select
Enter
Back
Exit
programme, and then press ;.
NOTE
• You can also display this setting screen
from “TV Menu” > “EPG” > “Search by
date”.
Children’s/Youth programmes
Music/Ballet/Dance
NOTE
• You can also display the EPG screen from “TV Menu” > “EPG” > “EPG”.
Select a programme
6 Display the timer list for TV
NOTE
programmes
1 Select the time span
3 Check programme
• You can also display this setting screen
from “TV Menu” > “EPG” > “Search by
genre”.
information
Press c/d to select the time span
you want to search.
• Continue to press d to display
programmes in the next time span.
2 Select the desired
programme
Press a/b to select the desired
programme.
• If a or b are displayed on the left of
the services, continue to press a/b
to display next or previous screen.
Press B.
• Refer to page 24 for the timer setup.
1 Press a/b/c/d to select the
programme you want to check.
2 Press R, and then press ; to tune
to the selected programme.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
Timer setup using EPG
Cancelling the timer setup
The TV can be switched to a programme or start
recording for USB-recording at the set time.
1 Press EPG.
1 Press EPG.
2 Press a/b/c/d to select the programme with
timer setup, and then press ;.
2 Press a/b/c/d to select the programme you
3
Press c/d to select “Cancel”, and then press ;.
want to set, and then press ;.
4 Press c/d to select “Yes”, and then press ;.
E
Cancelling using B button on the
Back to EPG
Watch
Next
remote control unit
1 Press EPG.
Record
No
2 Press B to display the timer setup list.
3 Press a/b to select the programme you want
3 Press c/d to select “Watch” or “Record”, and
then press ;.
to cancel timer setup, and then press ;.
• If you select “No”, the TV returns to the EPG screen.
4
Press c/d to select “Cancel”, and then press ;.
5 Press c/d to select “Yes”, and then press ;.
4 Press c/d to select “Yes”, and then press ;.
• The selected TV programme is marked with an icon.
5 Press ; to select “Back”.
NOTE
• You cannot select “Record” when the registered USB
HDD is not connected to the USB port.
• A combined total of 16 timer settings (“Watch” and
“Record”) can be set.
*Important information:
A CAM (CI Plus v1.3) PIN code may be necessary to
record broadcasts scrambled due to parental rate
settings.
When a CAM PIN code is required for recording a
programme, it is necessary to enter the CAM PIN code
in advance (Page 12).
If a CAM PIN code is not entered or is entered
incorrectly, the programme may not be able to be
recorded/played back.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
Teletext
NOTE
• Teletext will not work if the selected signal type is RGB
(Page 47).
• Teletext will not work in 3D mode.
What is teletext?
Teletext broadcasts pages of information and
entertainment to specially equipped TV. Your
TV receives teletext signals broadcast by a TV
network, and decodes them into graphical format
for viewing. News, weather and sports information,
stock exchange prices and programme previews are
among the many services available.
Buttons for teletext operations
Buttons
:r/s
Description
Increase or decrease the page number.
Numeric
buttons 0_9
Directly select any page from 100 to
899 by using the 0_9 numeric buttons.
Select a group or block of pages
displayed in the coloured brackets at
the bottom of the screen by pressing
the corresponding colour (R/G/Y/B) on
the remote control unit.
Turning teletext on/off
Colour
(R/G/Y/B)
1 Select a TV channel or external source providing
a teletext programme.
2 Press m to display the teletext.
k (Reveal
hidden
Reveal or hide hidden information such
as an answer to a quiz.
• Many stations use the TOP operating system, while
some use FLOF (e.g., CNN). Your TV supports both
these systems. The pages are divided into topic
groups and topics. After switching on the teletext,
up to 2,000 pages are stored for fast access.
• If you select a programme with no teletext signal,
“No Teletext available” displays.
teletext)
3 (Freeze/
Hold)
Stop updating teletext pages
automatically or release the hold mode.
Display the subtitle or exit the subtitle
screen.
• Subtitles will not be displayed when
the service does not contain subtitle
information.
[ (Subtitle
for teletext)
• The same message displays during other modes if
no teletext signal is available.
Reveal or hide subpages.
• Move to the previous subpage (R).
TELETEXT
TELETEXT
1 (Subpage) • Move to the following subpage (G).
• These two buttons are shown on the
screen by the symbols “e” and “f”.
Display the top menu.
• The top menu will not be displayed
when the service does not support
• Each time you press m, the screen switches as
shown above.
• Press m again to display the teletext on the right
screen and the normal image on the left screen.
;
top menus.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching TV
View setting
MHEG-5 application (UK only)
Using data service
Data service setting
Some services bring you programmes with the
MHEG application encoded, letting you experience
DTV interactively. When provided, the MHEG-5
application will start when you press m.
1 Press a/b/c/d to select a desired option,
and then press ;. The selected service will be
started.
Set the MHP/Hbb service starting settings (“Auto”,
“Manual”, “Off”).
Go to “TV Menu” > “Setup” > “View setting” >
“Data service setting”.
NOTE
NOTE
• Operations vary depending on the MHP/Hbb
application.
• MHEG may not be displayed properly in 3D mode.
• You can view some MHEG-5 content even if you do not
perform “Network setup”. Furthermore, “Network setup”
allows you to view additional content such as interactive
content from “HOME” > “Network setup”.
• You cannot view MHEG-5 content when MHEG-5
content is not broadcast even if you perform the
appropriate “Network setup”. Carefully check the
broadcast programme.
NOTE
• If a certain function appears on the screen, you can use
the offered function by pressing the colour buttons.
• Text can be inputted using the numbers and letters
printed on the numeric buttons on the remote control
unit.
• If “Data service setting” is set to “Auto”, the TV will load
the MHP/Hbb pages automatically.
• To avoid automatic loading, you can set to “Manual” or
“Off”.
• Subtitles for teletext may not display when MHP/Hbb
service is started. In such cases, set to “Off”.
• “Manual” can be set only for Italy.
2 If you press END, data service will close.
Open MHP/Hbb TV pages
MHP application (858 series only)
If the channel you are currently watching provides
data service, you can enjoy MHP/Hbb content.
If the TV is installed for Italy, MHP (Multimedia Home
Platform) is active. If the channel you are currently
watching provides MHP service, you can enjoy a
variety of MHP services.
E
When “Data service setting” is set to
“Auto”
NOTE
Press R to display the data service screen.
• MHP may not be displayed properly in 3D mode.
• You can view some MHP content even if you do not
perform “Network setup”. Furthermore, “Network setup”
allows you to view additional content such as interactive
content from “HOME” > “Network setup”.
NOTE
• After changing the channel, please wait momentarily
until “HbbTV” icon is displayed on the screen (HbbTV).
E
When “Data service setting” is set to
“Manual” (Italy only)
Hbb TV application
If the channel you are currently watching provides
HbbTV service, you can enjoy a variety of services.
1 Press APP to display the MHP application
list.
2 Press a/b/c/d to select a desired service,
and then press ;.
3 Press R to display the data service screen.
NOTE
• This application is not available when “UK” or “Italy” is
selected for the country setting.
• HbbTV may not be displayed properly in 3D mode.
• You need to perform “Network setup” to enjoy HbbTV
application. Please navigate “HOME” > “Network
setup”.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting external devices
Introduction to connections
ø 3.5 mm stereo minijack cable
HDMI device
(Page 28)
The TV is equipped with the terminals as shown
below. Find the cable corresponding the TV’s
terminal and connect the device.
DVI/HDMI cable
E
Before connecting ...
HDMI-certified cable
• Be sure to turn off the TV and any devices before
making any connections.
• Firmly connect a cable to a terminal or terminals.
• Carefully read the operation manual of each external
device for possible connection types. This also helps
you get the best possible audiovisual quality to
maximise the potential of the TV and the connected
device.
Game console or
camcorder (Page 30)
HDMI-certified cable
AV cable
Connection method for other devices
w PC
Æ Page 59
w USB HDD
Component cable
Æ Page 51
Video recording device
(Pages 29–30)
w USB memory
Æ Page 55
Audio cable
w Internet
Æ Pages 64 and 65
SCART cable
Audio device
(Page 30)
Audio cable
or
Optical audio cable
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting external devices
DVI/HDMI conversion
Video connections
Using a DVI/HDMI cable, the digital video signals of a DVD can also be played
via the compatible HDMI connection. The sound must be fed in additionally.
• When connecting a DVI/HDMI cable to the HDMI terminal, the image may not come in
clearly.
HDMI connection
• Both HDMI and DVI use the same HDCP copy protection method.
Example of connectable devices
E
DVD player/recorder
E
When using the HDMI 2 terminal
E
Blu-ray player/recorder
You must set the audio signal input source depending on the type of HDMI
cable connected (refer to page 47 for details).
E
Game console
The HDMI connections permit digital video and audio transmission via a
connection cable from a player/recorder. The digital picture and sound data are
transmitted without data compression and therefore lose none of their quality.
Analogue/digital conversion is no longer necessary in the connected devices,
which also would result in quality losses.
HDMI-certified cable
1 Press b to select “HDMI 2” from the “INPUT” menu, and then press
;.
2 Go to “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Audio
select” > select “HDMI”.
DVI/HDMI cable
1 Press b to select “HDMI 2” from the “INPUT” menu, and then press
;.
2 Go to “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Audio
select” > select “HDMI + Analogue”.
NOTE
• If a connected HDMI device is AQUOS LINK compatible, you can take advantage
of versatile functions (Pages 31_34).
• Video noise may occur depending on the type of HDMI cable used. Make sure to use a
certified HDMI cable.
• When playing the HDMI image, the best possible format for the picture will be detected
and set automatically.
• An ARC (Audio Return Channel) compatible audio receiver must be connected to the
HDMI 1 terminal with an ARC-compatible cable.
n
p
o
• All HDMI terminals support 3D image signals.
Supported video signal
576i, 576p, 480i, 480p, 1080i, 720p, 1080p
See page 61 for PC signal compatibility.
Supported audio signal
Linear PCM, sampling rate 32/44.1/48kHz.
Dolby Digital, DTS
ø 3.5 mm stereo minijack cable (commercially available)
DVI/HDMI cable (commercially available)
HDMI-certified cable (commercially available)
n
o
p
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting external devices
SCART connection
Y
PB
(CB)
PR
(CR)
Component connection
Example of connectable devices
Example of connectable devices
E
E
VCR
VCR
E
E
DVD player/recorder
DVD player/recorder
You will enjoy accurate colour reproduction and high quality images through the
EXT 3 terminal when connecting a DVD player/recorder or other device.
o
n
n
SCART cable (commercially available)
n
NOTE
Component cable (commercially available)
Audio cable (commercially available)
n
o
• Regarding the external output:
− You can record programmes viewed on the TV with an external recording device
by connecting the external output of the TV with an SCART cable (commercially
available).
− If you change TV channels during recording from the external devices or turn off the
power on the TV, the recorded content may change or be interrupted.
− The external output may not be performed depending on the status of use.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting external devices
Audio connections
VIDEO connection
Speaker/amplifier connection
Connect an amplifier with external speakers as shown below.
Example of connectable devices
E
VCR
E
DVD player/recorder
Game console
E
E
Connecting an amplifier with digital/analogue audio inputs
E
Camcorder
You can use the EXT 2 terminal when connecting to a game console, camcorder,
a DVD player/recorder or other device.
n
o
Stereo conversion cable (for analogue audio) (commercially available)
Optical audio cable (for digital audio) (commercially available)
n
o
* This terminal is also used for headphones. Reduce the volume before using
headphones. Overwhelming sound may damage your hearing.
NOTE
• If the image is not in sync with the audio, check the settings of the connected surround
system.
n
E
After connecting
Digital audio output setting
After connecting an amplifier with digital audio input and external speakers
as shown, you should set an audio output format compatible with the
programme you are watching or the device connected.
Go to “TV Menu” > “Setup” > “Option” > “Terminal setting” > “Digital
audio output” > select “PCM” or “Bitstream”.
NOTE
• When set to “Bitstream”, Dolby Digital is output when the Dolby Digital or Dolby
Digital Plus audio formats are received or DTS is output when DTS audio formats
are received. When set to “PCM”, PCM is output no matter what audio formats are
received.
AV cable (commercially available)
n
• When set to “Bitstream”, HE-AAC audio formats can be output as Dolby Digital.
• When set to “Bitstream”, Dolby Digital Plus can be output as Dolby Digital.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
AQUOS LINK
w Multiple control of HDMI devices
You can select which HDMI device to operate using
the “Link operation” menu.
Controlling HDMI devices using
AQUOS LINK
NOTE
E
What is AQUOS LINK?
• When you use AQUOS LINK, make sure to use a
certified HDMI cable.
Using the HDMI CEC protocol, with AQUOS LINK
you can interactively operate compatible system
devices (AV amplifier, DVD player/recorder, Blu-ray
player/recorder) using a single remote control unit.
• Point the remote control unit toward the TV, not to the
connected HDMI device.
• Video noise may occur depending on the type of HDMI
cable used. Make sure to use a certified HDMI cable.
• Up to three HDMI recording devices, one AV amplifier
and three players can be connected using this system.
• These operations affect the HDMI device selected
as the current external source. If the device does not
operate, turn on the device and select the appropriate
external source using b.
NOTE
• AQUOS LINK-compatible AQUOS AUDIO speaker
system and AQUOS recorder are scheduled to be on
sale after the release of this TV.
• AQUOS LINK does not work while using USB-recording
functions.
• When you insert/remove HDMI cables or change
connections, turn on all connected HDMI devices
before turning on the TV. Confirm that picture and audio
are correctly displayed/output by selecting “HDMI 1”,
“HDMI 2”, “HDMI 3” or “HDMI 4” from the “INPUT”
menu.
E
What you can do with AQUOS LINK
w One touch recording (DTV/SAT only)
You do not have to search for the remote control unit
of your recording device. Press the REC E or REC
STOP H buttons to start/stop recording what you
see on the recorder.
Regarding “Select recording device”
w One touch play
When the TV is in standby mode, it will automatically
turn on and play back the image from the HDMI
source.
Select the device for recording from connected
devices.
NOTE
• This function enables you to select either the USB HDD
for USB-recording use or the HDMI device with CEC
protocol.
w Single remote control operation
AQUOS LINK automatically recognises connected
HDMI devices and you can control the TV and the
devices as if using a universal remote control unit.
1 Go to “TV Menu” > “Setup” > “View setting” >
“Select recording device”.
2 Select the device for recording using the REC E
button on the remote control unit.
w Operating title list of external devices
• Select “USB HDD” when using the REC E button
for USB-recording.
In addition to displaying the TV’s own timer list
(Page 23), you can also call up the external player’s
top menu or AQUOS BD player’s/AQUOS recorder’s
title list provided that the devices support AQUOS
LINK.
• Select “HDMI device” when using the REC E
button for recording to the HDMI device.
3 Press the 6 (Return) to end the operation.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
AQUOS LINK
AQUOS LINK connection
First connect the AQUOS AUDIO speaker system or an AQUOS BD player/
AQUOS recorder that supports the HDMI CEC protocol.
Connecting an AQUOS BD player/AQUOS recorder via the AQUOS
AUDIO speaker system
Connecting an AQUOS BD player/AQUOS recorder only
AQUOS BD player/AQUOS recorder
AQUOS AUDIO speaker system
AQUOS BD player/AQUOS recorder
HDMI-certified cable (commercially available)
Optical audio cable (commercially available)
HDMI-certified cable (commercially available)
n
o
n
* The ARC (Audio Return Channel) function works only when using the HDMI 1 terminal.
NOTE
• Refer to the operation manual of the device to be connected for further details.
• After unplugging connection cables or changing the connection pattern, turn on the
power of the TV after all relevant devices’ power have been turned on. Change the
external input source by pressing b, select the appropriate external source and verify
the audiovisual output.
• The cables illustrated in the following explanation are commercially available items.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
AQUOS LINK
AQUOS LINK setup
Basic operation
Using genre info.
Operating an AQUOS LINK device
This function allows you to automatically switch
to the appropriate sound mode depending on the
genre information included the digital broadcast.
AQUOS LINK allows you to operate the HDMI-
connected device with a single remote control unit.
Go to “TV Menu” > “Link operation” >
“AQUOS LINK setup” > select the menu you
want to set.
Audio return channel (ARC)
If this function is set to “Auto”, the TV can send
audio data for video content shown on the TV
to a connected audio device with just one ARC-
compatible cable. Using this function eliminates the
need to use a separate digital or analogue audio
cable.
AQUOS LINK control
1 Press I to start playback of a title.
• See the section Top menu/title list if you want
to start playback using the list of the titles in the
AQUOS BD player/AQUOS recorder.
Set to “On” to enable HDMI CEC functions.
Auto power on
2 Press J to fast forward.
Press G to reverse.
If this is activated, the one touch play function
is enabled. While the TV is in standby mode, it
automatically turns on and plays back the image
from the HDMI source.
Connection for using “Audio return channel”
• You need to use ARC-compatible cables/devices and
connect to the HDMI 1 terminal to activate this function.
The connection method is the same as Connecting an
AQUOS BD player/AQUOS recorder via the AQUOS
AUDIO speaker system (Page 32).
Press REC E to start recording.
Press REC STOP H to stop recording.
Press H to stop.
NOTE
• The factory default for this item is “Off”.
Press F to pause.
Press B to turn the HDMI-connected device
on/off.
Selecting recorder
Here, you can select a recorder for the recording
from several connected recorders.
NOTE
• Refer to Regarding “Select recording device” (Page 31),
when the buttons for AQUOS LINK devices do not work.
NOTE
•
If you have connected the AQUOS AUDIO speaker
system between the TV and an AQUOS recorder, the
external source’s indication changes (e.g., from “HDMI 1”
to “HDMI 1 (Sub)”).
AQUOS LINK menu
You can select the AQUOS LINK menu from the
“Link operation” menu to arrange the settings for
sound or an external device.
Selecting channel key
Recorder power on/off
This function allows you to select the channel of
the connected HDMI device using the TV’s remote
control unit.
1 Press a/b to select the input source of the
connected HDMI device you want to control
using the TV’s remote control unit, and then
press ;.
You can call up the CEC-compatible recorder’s EPG
and preset timer recordings using the TV’s remote
control unit.
1 Press a/b to select “Recorder power on/off”,
and then press ;.
• The external input source switches and the
recorder’s EPG is displayed.
2 Press c/d to select “On”, and then press ;.
2 Select the programme to record.
• Refer to the operation manual of the recorder for
details.
33
Download from Www.Somanuals.com. All Manuals Search And Download.
AQUOS LINK
Top menu/title list
Recorder EPG
Model select
This section explains how to play back a title in the
AQUOS BD player/AQUOS recorder.
You can call up the CEC-compatible recorder’s EPG
and preset timer recordings using the TV’s remote
control.
If multiple HDMI devices are connected in a daisy
chain, you can specify which device to control here.
1 Press a/b to select “Top menu/title list”, and
then press ;.
Press a/b to select “Model select”, and then
press ;. The HDMI device changes every time
you press ;.
1 Press a/b to select “Recorder EPG”, and then
press ;.
• The linked recorder now powers on and the TV
automatically selects the appropriate external input
source.
• The external input source switches and the
recorder’s EPG is displayed.
• The title list data from the connected AQUOS BD
player/AQUOS recorder displays.
2 Select the programme to record.
• Refer to the operation manual of the recorder for
details.
2 Press @ to hide the menu screen to
operate a/b/c/d buttons.
Change audio output device
3 Select the title with a/b/c/d, and then press
PLAY I.
By AQUOS audio SP
You can choose to listen to the TV sound only from
the AQUOS AUDIO speaker system.
Setup menu
You can call up the menu of an HDMI CEC-
compatible external device (player, recorder, etc.)
using the “Setup menu” function.
Press a/b to select “By AQUOS audio SP”,
and then press ;.
• The sound from the TV speaker and headphone
terminal is silenced and only the sound from the
AQUOS AUDIO speaker system is audible.
• Audio description sound is not available.
Press a/b to select “Setup menu”, and then
press ;.
NOTE
By AQUOS SP
You can choose to listen to the TV sound only from
the AQUOS TV speaker system.
• If a connected device does not have this function
or the device is in a status where the menu cannot
be displayed (recording, entering standby, etc.), this
function may not be available.
Press a/b to select “By AQUOS SP”, and then
press ;.
Media change
Sound mode change
If your recorder has multiple storage media, select
the media type here.
You can manually change the AQUOS AUDIO
speaker system’s sound mode.
1 Press a/b to select “Sound mode change”.
1 Press a/b to select “Media change”, and then
press ;.
2 Select the desired medium, such as DVD
recorder or HDD. The media type changes every
time you press ;.
2 The sound mode changes every time you press
;.
• Refer to the operation manual of the AQUOS AUDIO
speaker system for details.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
AQUOS LINK
E
Auto Power On
Using a Smartphone with the TV
When an MHL-compatible device is connected to the
TV, the TV turns on automatically.
• This function operates when “AQUOS LINK Control” is set
to “On”. (See page 33.)
This function enables you to connect the TV to a smartphone that supports
Mobile High-Definition Link (MHL) using an MHL-compatible cable.
To connect the TV to your MHL-compatible smartphone, be sure to use an MHL-
compatible cable (commercially available).
• You can view pictures and video on a large screen.
• You can play back music files.
E
Auto Input Selection
When an MHL-compatible device is connected while
the TV is on, the input mode is selected automatically.
• This function operates when “AQUOS LINK Control” is set
to “On”. (See page 33.)
E
Operation Using the Remote Control
The remote control of the TV can be used to operate a
portable device.
• a/b/c/d, ;, >, 0-9, etc.
• The operations vary depending on the connected
equipment and content being viewed.
MHL-compatible cable
HDMI 4 terminal (Rear side)
NOTE
• An MHL-compatible portable device is required to use this function. Connect the device
to the HDMI 4 terminal.
• This product incorporates MHL 1.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment
Item
Picture
Picture settings
The TV automatically sets the
appropriate selection from the “AV
mode” menu depending on the
lighting conditions and the type of
programme watched.
For a highly defined image in a
normally bright room.
Clear Picture Processing
Go to “TV Menu” > “Setup” > “Picture”.
AUTO
Processes noise included in broadcast signals to
improve picture quality.
Menu
CH list
Setup
Item
STANDARD
MOVIE
:Enter
:Back
Improves picture quality through Clear
Picture Processing at a level above
“Middle”.
High
For viewing a movie in a darkened
room.
Picture
GAME (Standard/
High motion)
Middle
Off
For playing of video games.
AV mode
PC*1
For PC.
Turn OFF the function for improving picture
quality through Clear Picture Processing.
Clear Picture Processing
OPC
Allows you to customise settings as
desired. You can set the mode for
each input source.
Produce realistic colour on the TV
screen unlike any other signal.
USER
Picture
[Off]
Backlight
OPC
x.v.Colour*2
DYNAMIC
Automatically adjusts the brightness of the screen.
For a clear-cut image emphasising
high contrast for sports viewing.
Picture
Item
AV mode
The brightness is fixed at the value set in
“Backlight”.
Automatically adjusts.
Displays the OPC effect on the screen
while adjusting the brightness of the
screen.
For a clear-cut image emphasising
high contrast for sports viewing
(the “Picture” and “Audio” settings
cannot be adjusted).
Off
DYNAMIC (Fixed)
“AV mode” gives you several viewing options to
choose from to best match the system environment,
which can vary due to factors like room-brightness,
type of programme watched or the type of image
input from external equipment.
On
STANDARD (3D)
MOVIE (3D)
GAME (3D)
On:Display
Refer to page 75 for details.
Press a/b to select the desired mode, and
then press ;.
• You can also switch the mode on the “Picture” and
“Audio” menu screen by pressing #.
NOTE
I
“PC” is available only when selecting “HDMI 1”, “HDMI 2”,
“HDMI 3”, “HDMI 4” or “PC” from the “INPUT” menu.
J “x.v.Colour” is available only when accepting an
• When set to “On”, the TV senses the surrounding light
and automatically adjusts the backlight brightness.
Make sure no object obstructs the OPC sensor, which
could affect its ability to sense surrounding light.
• This function does not work when “3D brightness
boost” is set to “High” or “Low”.
“x.v.Colour” signal through an HDMI terminal.
NOTE
• If you select “AUTO”, some selections in the “AV mode”
menu may not be automatically set.
•
“
Game type” mode can be set. Refer to
“Game type” on
page 38.
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment
Picture
Picture
Colour temp.
Picture adjustments
Advanced
Adjusts the colour temperature to give the best
white image.
Adjusts the picture to your preference with the
following picture settings.
This TV provides various advanced functions for
optimising the picture quality.
Item
Go to “TV Menu” > “Setup” > “Picture” >
Adjustment items
High
White with bluish tone.
“Advanced”.
Intermediate tone between “High”
and “Middle”.
Selectable
Mid-High
Middle
c (Cursor)
d (Cursor)
The screen
items
C.M.S.-hue
Natural tone.
Backlight
The screen dims
This function adjusts the hue of a selected colour
using a six-colour adjustment system.
Intermediate tone between “Middle”
and “Low”.
brightens
Mid-Low
Low
3D
brightness
boost
White with reddish tone.
Refer to page 76 for details.
C.M.S.-saturation
Finely adjusts each colour
temperature between 1 to 10 points.
10 point setting*
Contrast
For less contrast For more contrast
Brightness For less brightness For more brightness
This function increases or decreases the saturation
of a selected colour using a six-colour adjustment
system.
R/G/B Gain (LO),
R/G/B Gain (HI)
Adjusts the white balance by
changing the value of each item.
For less colour
intensity
For more colour
intensity
Colour
* “10 point setting” is available only when selecting
“STANDARD”, “MOVIE”, “STANDARD (3D)”, or “MOVIE
(3D)” from the “AV mode” menu.
C.M.S.-value
Skin tones become Skin tones become
purplish greenish
For less sharpness For more sharpness
Tint
This function adjusts the brightness of a selected
colour using a six-colour adjustment system.
Sharpness
Motion enhancement
Colour gamut range
“Active motion 800/200” technologies provide
superior solutions for digital display picture quality
removing motion blur. Select “Motion enhancement”
setting (“Active motion 800”, “Active motion 200”,
“High”, “Low”, “Off”).
Adjusts the range of a subset of colour to display
the image. Expanded colour gamut means more
colourfulness; images become more vivid.
Item
NOTE
• This effect is greater on fast moving images.
Standard
Expanded
Standard colour gamut.
•
These functions will have no effect in the following cases.
1) The type of signal received is a PC signal.
2) An OSD is being displayed.
More vivid colour with expanded
colour gamut.
3) Teletext is activated.
• If images appear blurred, set to “Off”
NOTE
• This function is available only when selecting “MOVIE”
or “MOVIE (3D)” from the “AV mode” menu.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment
Game type
Film mode
DNR
Adjusts the images of fast moving video games to
be clearer.
Automatically detects a film-based source (originally
encoded at 24 or 25 frames per second, depending
on the vertical frequency), analyses it and then
recreates each still film frame for high-definition
picture quality.
“DNR” produces a clearer image (“Auto”, “High”,
“Middle”, “Low”, “Off”).
NOTE
Item
• This function may not be available depending on the
Optimises picture quality for
standard video games.
Standard
input signal type.
Item
Produces a sharp picture from the
original slow-moving picture in a
video game.
Range of OPC
High motion
Adjusts effect to reduce judder
from film contents. You can select
a desired level of judder reduction
from 0 to e10.
Plays back images with equal
display time for each frame,
reproducing movie theatre
experience.
The brightness level range of the OPC sensor’s
automatic adjustments can be set according to
your preferences. The adjustment range of the OPC
sensor can be set to a maximum of e16 and a
minimum of f16.
Advanced
Sub pixel control 2
Enables smoother diagonal lines through detailed
dot control.
Standard
NOTE
Item
• This function is available only when the “OPC” setting is
set to “On” or “On:Display”.
Off
Normal viewing mode.
Produces smoother diagonal lines
by jaggy removal process.
Produces smooth diagonal lines.
No adjustment.
Advanced
• The maximum setting cannot be set to a smaller number
than the minimum setting.
• The minimum setting cannot be set to a bigger number
than the maximum setting.
• The maximum and minimum settings cannot be set to
the same number.
• Depending on the brightness of the surrounding light,
the OPC sensor might not operate if the adjustment
range is small.
Active contrast
Standard
Off
Automatically adjusts the contrast of an image
according to the scene (“Advanced”, “Standard”,
“Off”).
Gamma adjustment
Selects the tone difference of the brightness and
darkness of the image according to the type of
programme watched from a maximum of e2 to a
minimum of f2.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment
Audio
Audio
Audio settings
Audio adjustment
Bass enhancer
Go to “TV Menu” > “Setup” > “Audio”.
You can adjust the sound quality to your preference
with the following settings.
This function allows you to enjoy bass-enhanced
sound.
Menu
CH list
Setup
Item
Treble
c (Cursor)
For weaker treble
For weaker bass
Decrease audio
from the right
speaker
d (Cursor)
For stronger treble
For stronger bass
Decrease audio
from the left
speaker
Audio
:Enter
:Back
Clear voice
Bass
Audio
This function emphasises speech against
background noise for greater clarity.
STANDARD
[Off]
Balance
Auto volume
Treble
Audio
Audio description setting
Audio
Bass
Surround
This function allows you to enable output of audio
description if the TV receives a signal including
audio description.
Balance
L30
R30
This function produces a surround effect from the
speakers.
NOTE
Audio
Item
• When the “Audio description” is set to “On”, the audio
description sound is superimposed on the main audio
when you select a broadcast compatible with audio
description.
• If you do not clearly hear the sound for the visually
impaired, go to “TV Menu” > “Setup” > “Audio” >
“Audio description setting” > “Mix level”, and select the
upper level to turn up the volume.
• This function is available only for DTV broadcasts. This
“Audio description setting” menu is not displayed for
the ATV or the external inputs.
• The audio description sound is superimposed on
the main audio only when the sound is output on the
speaker sound output, headphone sound output and
sound for audio out output. The sound is not output on
the S/PDIF sound output and the SCART sound output.
• This function is not available for the AQUOS Audio
speaker system.
Auto volume
Reproduces a life-like experience for
events such as live sports or concert
performances that take place in a stadium
3D Stadium
Different sound sources sometimes do not have
the same volume level, such as a programme and
its commercial breaks. This function reduces this
problem by equalizing levels.
like setting.
Reproduces a concert hall experience with
realistic live surround sound based on
reverberant sounds measured in a concert
3D Hall
Item
hall.
Strongly reduces the volume gaps among
different sound sources.
High
Reproduces a movie theatre experience
with realistic live surround sound based on
reverberant sounds measured in a movie
3D Movie
Middle
theatre.
Slightly reduces the volume gaps among
different sound sources.
Does not adjust the volume gaps.
3D
Creates three-dimensional surround sound
with detailed control of the signal phase.
Low
Standard
Off
Normal
Off
Provides limited surround sound.
Outputs normal sound.
• This function does not work during USB-recording
playback.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment
ECO
ECO
Power save settings
Energy save
No operation off
Go to “TV Menu” > “Setup” > “ECO”.
This function enables you to reduce the backlight
brightness in order to decrease the power
consumption and increase the backlight life span as
shown in the following table.
The TV will automatically enter standby mode if no
operations are performed in three hours if “Enable”
is selected.
Menu
CH list
Setup
:Enter
:Back
NOTE
• Five minutes before the TV enters standby mode, the
remaining time displays every minute.
Item
ECO
Standard
Advanced
Reduces the backlight brightness.
Reduces the backlight brightness more
than “Standard”.
The backlight brightness is the same
value of your settings in the selected
“AV mode”.
ECO
ECO picture control
Energy save
[On]
[Off]
Sleep timer
Off
Allows you to set a time when the TV automatically
enters standby mode. You can set the time span for
entering standby mode after selecting “Change”.
No signal off
[Disable]
[Disable]
No operation off
NOTE
NOTE
• This function does not work when “AV mode” is set to
“DYNAMIC (Fixed)”.
• This function does not work when “3D brightness
boost” is set to “High” or “Low”.
• Select “Off” to cancel the sleep timer.
• When the time has been set, countdown automatically
starts.
• Five minutes before the preset of time expires, the
remaining time displays each minute.
ECO
ECO picture control
E
“Energy save” status icons
This function automatically detects the image
source and decreases the power consumption while
keeping the brightness of the image unchanged.
Icon
Description
“Energy save” is set to “Standard”.
NOTE
“Energy save” is set to “Advanced”.
• This function does not work when “AV mode” is set to
“DYNAMIC (Fixed)”, “DYNAMIC” or “AUTO”.
• This function does not work when “Energy save” is set
to “Standard” or “Advanced”.
When “Energy save” is set to “Standard” or
“Advanced”, “Energy save” status icons appear
in the “Picture” menu and channel information
windows.
• This function is greyed out in 3D mode.
ECO
No signal off
When set to “Enable”, the TV will automatically
enter standby mode if there is no signal input for 15
minutes.
NOTE
• Even if a TV programme finishes, this function may not
operate because of interference from other TV stations
or other signals.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment
View settings
4 Press a/b to select the broadcast standard
Digital setting
you want to search, and then press ;.
E
Digital search
Go to “TV Menu” > “Setup” > “View setting”.
Terrestrial
After selecting the service you want to search,
either “Terrestrial” or “Cable”, refer to Digital
broadcast setting on page 16.
Menu
You can reconfigure the following settings when you
select “Terrestrial” in the initial auto installation or
the “Auto installation” menu.
CH list
Setup
:Enter
:Back
E
Analogue search
The TV searches for, sorts and stores all the
receivable TV stations. Refer to Analogue
broadcast setting on page 16.
E
Additional search
View setting
Use this menu to add new services automatically
after “Digital search” in the “Auto installation” menu
has been completed.
Auto installation
E
Satellite search
After selecting “Satellite search”, the current
DVB-S/S2 setting screen is displayed. Refer to
the “Satellite search” setting on page 17.
E
Channel settings
Network setup
Manual search
Add new services within a specified frequency band.
• Enter the frequency using 0_9 numeric buttons.
• You can perform “Manual search” with a service number
only when the five Nordic countries have been selected
in the country setting.
Select recording device
Important information:
Satellite services are only available for the 857 model
series.
E
Manual adjust
View setting
Configure various settings for each service using the
colour (R/G/Y/B) buttons.
Auto installation
NOTE
The TV automatically detects and stores all available
services in your area. This function also allows you
to perform the channel setting for digital, satellite
and analogue individually and reconfigure the
settings after the initial auto installation has been
completed.
• After selecting “Next” in the DVB-S/S2 setting screen,
you need to select your preferred satellite broadcast to
start searching.
Service
no.
Service
name
Lock
CH skip
Old LCN
View setting
Programme setup
1 Go to “TV Menu” > “Setup” > “View setting” >
Lock
CH skip
Delete
Sort
You can reconfigure the DTV service settings
automatically or manually.
“Auto installation”.
1 Press a/b to select the desired service.
2 Press c/d to select “Yes”, and then press ;.
1 Go to “TV Menu” > “Setup” > “View setting” >
2 Press the colour button on the remote control
unit corresponding with the item you want to
reconfigure.
3 Press a/b/c/d to select the desired
“Channel settings” > “Programme setup”.
language, and then press ;.
2 Press a/b to select the broadcast standard
NOTE
you want to reconfigure, and then press ;.
• The ✔ mark indicates the operation is set to on.
Each time the colour button is pressed, you can
switch the corresponding operation on/off.
• PIN input is required when executing “Auto installation”.
The default PIN is “1234”. To change the PIN setting,
refer to Individual setting — PIN (Page 44). To reset the
PIN setting (PIN input will no longer be needed), refer to
Reset the PIN (Page 79).
NOTE
• PIN input is required when executing “Programme
setup”. The default PIN is “1234”. To change the PIN
setting, refer to Individual setting — PIN (Page 44).
To reset the PIN setting (PIN input will no longer be
needed), refer to Reset the PIN (Page 79).
NOTE
• Depending on the installation country and/or
broadcaster or operator profile may only R option is
available.
• You cannot set the Home/Store setting and the country
setting in “Auto installation” in the “Setup” menu. If
you want to reconfigure those settings, automatically
execute initial auto installation after executing “Reset”
from the “Setup” menu.
• The current country setting is displayed on the screen.
41
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment
Cable
Satellite setting (857 series only)
Buttons for “Manual adjust” operation
Lock
Press R button.
Before selecting the type of search in “Satellite
setting”, you need to select the satellite broadcast.
You can reconfigure the following settings when you
select “Cable” in the initial auto installation or the
“Auto installation” menu.
When the service is locked, you must enter your
PIN whenever you tune to the service.
E
CH skip
Press G button.
Additional search
Use this menu to add new services automatically
after “Digital search” in the “Auto installation”
menu has been completed. Follow steps 1 to 5 in
Searching for cable broadcasts on page 16.
Services with a ✔ mark are passed over when
pressing :r/s on the TV or remote control
unit.
SAT2 [Hot Bird 13E]
SAT3 [None]
SAT4 [Turksat]
Delete
Press Y button.
E
Manual search
The selected service is deleted. If you want
to watch the service you deleted once again,
perform “Auto installation”, “Additional search”,
or “Manual search”.
Add new services within a specified frequency band.
After setting the items on the following screen, the
TV starts searching.
E
Additional search
Use this menu to add new services automatically
after auto installation has been completed. Follow
steps 1 to 2 in the right column on page 17.
• Refer to the table about menu items in the centre
column on page 16.
Sort
Press B button.
The item position of services can be sorted.
1 Press a/b to select the service whose
item position you want to move, and then
press ;.
Frequency
E
Manual search
Add new services within a specified frequency band.
After setting the items on the following screen,
select “Yes” from “Search start” menu.
Symbol rate
MHz
QAM modulation
Search start
Band
[Vert/Low]
2 Press a/b to move it to the desired
Frequency
Symbol rate
Search start
E
Manual adjust
Vert/Low
Vert/High
Horiz/Low
Horiz/High
position, and then press ;.
This function is the same as in “Terrestrial”. Refer to
“Manual adjust” in “Terrestrial”.
NOTE
3 Repeat steps 1 and 2 until all desired
• Some functions may not display or be selectable
depending on the country setting or cable provider
selection.
service items are sorted.
E
Favourite network selection
E
Manual adjust
When the country setting is “Norway” and DTV,
the user may select their preferred network. The
service sorting will be changed in accordance with
the preferred network. If a conflict occurs between
multiple networks, this function allows you to select
your preferred network.
This function is the same as in “Digital setting”.
Refer to “Manual adjust” in “Digital setting”.
1 Press a/b to select the desired network.
2 Press ; to set the network selected.
42
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment
Analogue setting
E
Sort
Sound sys.
Channel positions can be sorted freely.
You can reconfigure the analogue TV channels
settings automatically or manually.
1 Press c/d to select “Yes”, and then press ;.
Select the optimum sound systems (broadcasting
systems) to receive (“B/G”, “D/K”, “I”, “L/L’”).
2 Press a/b/c/d to select the channel you
E
Additional search
want to move, and then press ;.
Label
Use this menu to add new services automatically
after “Analogue search” in the “Auto installation”
menu has been completed.
3 Press a/b/c/d to move it to the desired
position, and then press ;.
When a TV channel sends its network name, the
“Auto installation” detects the information and
assigns a name to it. However, you can change
channel names individually.
4 Repeat steps 2 and 3 until all desired channels
• Start searching channels after selecting the colour
system and sound system.
are sorted.
E
Erase programme
E
Manual adjust
Select each character of the new name for the
channelwithusingthesoftwarekeyboard(Page14).
Channels can be erased individually.
Use this menu to set up analogue TV channels
manually.
1 Press c/d to select “Yes”, and then press ;.
2 Press a/b/c/d to select the channel you
want to erase, and then press ;.
• A message window pops up.
NOTE
After selecting “Yes” on the screen, press
a/b/c/d to select the channel you want to
set and then press ;.
• The name can be five characters or less.
Skip
3 Press c/d to select “Yes”, and then press
; to erase the selected channel. All the
subsequent channels move up.
Fine
Channels with “Skip” set to “On” are passed over
when using :r/s even if selected while watching
the image from the TV.
You can adjust the frequency to the desired position.
4 Repeat steps 2 and 3 until all desired channels
NOTE
are erased.
Lock
• Adjust while checking the background picture as a
reference.
• You can set by directly entering the frequency number
of the channel with 0_9 numeric buttons.
You can block the viewing of any channel.
NOTE
EXAMPLE
• See “PIN” for setting a PIN.
• 179.25 MHz: Press 1 > 7 > 9 > 2 > 5.
• 49.25 MHz: Press 4 > 9 > 2 > 5 > ;.
• When “Lock” is set to “On” for a channel, “Child lock
has been activated” displays, and the image and sound
of the channel are blocked.
• When pressing 6 while “Child lock has been activated”
displays, the PIN input window will display. Inputting
the correct PIN unlocks the “PIN” temporarily until the
power is turned off.
Colour sys.
Select the optimum colour system to receive
(“Auto”, “PAL”, “SECAM”).
43
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment
View setting
Individual setting — PIN
Individual setting — Clock
Parental rating
View setting
View setting
This function allows DTV services to be restricted.
It prevents children from watching violent or sexual
scenes that may be harmful.
PIN
Clock setup
Allows you to use a PIN to protect certain settings
from being accidentally changed.
You can adjust the time manually and change the
clock display.
1 Go to “TV Menu” > “Setup” > “View setting” >
“Individual setting” > “Parental rating”.
Go to “TV Menu” > “Setup” > “View setting” >
“Individual setting” > “PIN”.
Go to “TV Menu” > “Setup” > “View setting” >
“Individual setting” > “Clock setup”.
2 Repeat steps 1 to 4 in when selecting “Yes” to
the left.
NOTE
Time adjustment
NOTE
• PIN input is required when executing “PIN”. The default
PIN is “1234”. To reset the PIN setting (PIN input will no
longer be needed), refer to Reset the PIN (Page 79).
• “Universal viewing” and “Parental approval pref.” are
ratings used exclusively in France.
• Refer to page 88 for details about ratings.
This function allows you to set the clock manually.
NOTE
E
When selecting “Yes”
• If you select “No”, the TV will try to get the time for the
Register a four-digit number to use the “PIN”
function.
broadcast.
Time display
1 Press c/d to select “Yes”, and then press ;.
2 Enter the four-digit number as a PIN using 0_9
This function allows you to display the clock time in
the lower-right corner of the screen.
numeric buttons.
3 Enter the same four-digit number as in step 2 to
Item
confirm.
On
Displays the clock time.
Displays the clock time in
30-minute increments.
• “The system PIN has been changed successfully”
displays.
On (half-hourly)
Off
4 Press ;.
NOTE
Hides the clock time.
• As a precautionary measure, make a note of your
PIN and keep it in a safe place that children cannot
reach.
Time format
You can select the time format (either “24HR” or
“AM/PM”) for the clock time.
• “0000” cannot be set as the PIN code.
• To view a locked channel, you must enter the PIN (see
pages 42 and 43 for locking channels from viewing in DTV,
SAT and ATV mode). When you select a locked channel,
a PIN prompt message pops up. Press 6 to display the
PIN input window.
Clock type
You can select the type of the clock (either “Digital”
or “Analogue”) displayed in the lower right of the
screen.
NOTE
• This setting does not influence the clock displayed on
the HOME screen.
44
Download from Www.Somanuals.com. All Manuals Search And Download.
Basic adjustment
E
Set “For hearing impaired” to “Yes”
Individual setting — Language
Subtitles for the hearing impaired have priority over
each of the subtitle language settings (e.g., “1st
language”, “2nd language”, etc.).
View setting
Digital audio language
EXAMPLE
Set up to three preferred multi audio languages to
display if the audio languages are available.
1st language
1st language
(For hearing impaired)
Go to “TV Menu” > “Setup” > “View setting” >
“Individual setting” > “Digital audio language”.
NOTE
E
Switching the multi audio languages
• Subtitles will not be displayed when the programme
does not contain subtitle information.
Each time you press 7 on the remote control unit,
the audio language switches.
• Subtitles for teletext will not be displayed when an MHP
service is active (858 series only).
• Subtitles may not be displayed properly in 3D mode.
View setting
Subtitle
View setting
Set up to two preferred subtitle languages (including
subtitles for the hearing impaired) to display if
subtitles are available.
Language
You can select an OSD language from among 26
languages. Refer to the OSD language column in
the specification table for the selectable languages
(Page 84).
Go to “TV Menu” > “Setup” > “View setting” >
“Individual setting” > “Subtitle”.
Selectable items
Go to “TV Menu” > “Setup” > “View setting” >
“Language”.
E
1st language
E
2nd language
E
For hearing impaired
E
Switching subtitle languages
Each time you press [ on the remote control unit,
the subtitle switches.
Off
1st language
2nd language
45
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful viewing functions
Item (for SD [Standard-Definition] signals)
Optional features settings
Selecting the picture size automatically
Keeps the original aspect ratio in a full
screen display.
Normal
Option
Go to “TV Menu” > “Setup” > “Option”.
For 14:9 letterbox pictures. A thin
side bar appears on each side, and
you may also see bars on the top and
bottom with some programmes.
In this mode, the picture is stretched
toward each side of the screen. The
picture may appear similar to “Full”
depending on broadcast signals.
Auto wide (only DTV/SAT mode)
Menu
Zoom 14:9*
Panorama
CH list
Setup
The “Auto wide” allows the TV to switch
automatically among the different picture size.
:Enter
:Back
Go to “TV Menu” > “Setup” > “Option” > “Auto
wide”.
Option
NOTE
Option for view
3D setup
Full
For 16:9 squeeze pictures.
• Use “Wide mode” if an image does not switch to the
appropriate picture size. When the broadcast signal
contains no aspect ratio information, the function will
not work even if enabled.
For 16:9 letterbox pictures. Bars may
appear on the top and bottom with
some programmes.
Cinema 16:9
Terminal setting
Colour system
• This function is available for 3D images converted from
2D images or normal 2D images.
For 14:9 letterbox pictures. Bars may
appear on the top and bottom with
some programmes.
Keeps the original resolution, do not
expand.
Cinema 14:9*
Original
Selecting the picture size automatically
for 4:3
Selecting the picture size manually
* The items will be diplayed in ATV/DTV/SAT mode.
Option
Option
4:3 mode (only DTV/SAT mode)
Item (for HD [High-Definition] signals)
Wide mode
Displays with an overscan image.
Crops all sides of screen.
Full
The 4:3 mode allows you to select between
“Normal” and “Full”.
You can select the picture size. Selectable picture
size varies with the type of signal received.
Displays with an underscan image
only when receiving a 720p signal.
Go to “TV Menu” > “Setup” > “Option” > “4:3
mode”.
1 Go to “TV Menu” > “Setup” > “Option” >
“Option for view” > “Wide mode”.
Displays with the High-Definition image
adjusted optimally. Noise may appear
Underscan
• You can also select an item by pressing f on the
remote control unit.
Item
on the edge of the screen with some
programmes.
Normal range keeping 4:3 or 16:9
aspect ratio.
Wide image without side bars.
Normal
• The menu lists the “Wide mode” options selectable
for the type of video signal currently received.
Displays an image with the same
number of pixels on the screen when
receiving 1080i/1080p signals only.
Full
Dot by Dot
2 Press a/b to select the desired item.
• As you toggle the options, each is immediately
reflected on the screen. There is no need to press
;.
4:3 screen types
NOTE
4:3 mode
“Normal”
4:3 mode
“Full”
• Some items do not appear depending on the type of
received signal.
• You may not be able to change the wide mode while in
3D mode.
• Refer to page 59 for PC signal inputs.
46
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful viewing functions
Terminal setting
Option
Skipping specified inputs
Input label
Option
Option
You can label each input source with a custom
description.
Digital audio output
Input skip
This function allows you to select the digital audio
signal type.
1 Press b to select the desired input source
This setting allows you to skip the inputs on the
input source selection operation.
from the “INPUT” menu, and then press ;.
Go to “TV Menu” > “Setup” > “Option” >
“Terminal setting” > “Digital audio output”.
2 Go to “TV Menu” > “Setup” > “Option” >
Go to “TV Menu” > “Setup” > “Option” >
“Terminal setting” > “Input skip”.
“Terminal setting” > “Input label”.
3 Select each character of the new name for the
input source with using the software keyboard
(Page 14).
Item
NOTE
• When you select “ATV”, “DTV” or “SAT”, the skip
function works only when using the b button on the
TV.
PCM
To stereo audio system
To multi-channel Dolby Digital, DTS
audio system
Bitstream
NOTE
• If you connect external equipment to an HDMI terminal
which you have set to be skipped, a notification
message appears on the display when a signal is
received from the connected external equipment. Press
“OK” to reset the related skipping setting so that the
input terminal becomes available.
• The label can be six characters or less.
• This menu can be changed in the case of the following
Option
input sources:
− EXT1–3
− HDMI1–4
− PC
Audio select
When using the PC terminal or HDMI 2 terminal, you
must select which terminal uses the AUDIO (L/R)
jack for analogue audio input.
Input source settings
CH list
Go to “TV Menu” > “Setup” > “Option” >
Option
“Terminal setting” > “Audio select”.
INPUT
TV
Input select
When selecting “HDMI 2” from the “INPUT” menu
Item
For setting the signal type of external equipment.
Switchable
When connecting devices (including a PC)
with a HDMI cable to the HDMI 2 terminal.
1 Press b to select the input source for setting
the input signal (“EXT1”) from the “INPUT”
menu, and then press ;.
HDMI
When connecting devices (including a
Selecting the HDMI picture size
automatically
HDMI +
Analogue
PC) with a DVI/HDMI cable to the HDMI
2 terminal and inputting analogue audio
signals from the AUDIO (L/R) jack.
2 Go to “TV Menu” > “Setup” > “Option” >
“Terminal setting” > “Input select”.
Option
Item
When selecting “PC” from the “INPUT” menu
HDMI auto view
EXT1
Y/C, CVBS, RGB
Item
This function allows you to automatically change to
the appropriate picture size when viewing an HDMI
signal using the HDMI 1, 2, 3 and 4 terminals.
1 Press b to select the input source (“HDMI 1”,
“HDMI 2”, “HDMI 3” or “HDMI 4”) connected to
your HDMI device, and then press ;.
NOTE
When connecting devices with an
AV cable to the PC terminal, displays
images without audio.
• If no (colour) image displays, try changing to another
signal type.
Video
• Check the operation manual of the external equipment
for the signal type.
When connecting a PC to the PC
terminal, and inputting analogue audio
signals from the AUDIO (L/R) jack.
Video+Audio
2 Go to “TV Menu” > “Setup” > “Option” >
“Terminal setting” > “HDMI auto view”.
47
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful viewing functions
NOTE
Option
Option
• This function does not work when “Change audio
output device” (Page 34) is set to “By AQUOS audio SP”
or “Headphone/Audio out select” is set to “Audio out”.
• Regarding the volume adjustment when “Dual” is set:
− Adjust the speaker volume with the i+/- buttons
on the remote control unit.
Headphone/Audio out select
Programme title display
You can select which device is used for outputting
audio.
This function allows you to display programme
information such as the title and airtime by tuning a
channel.
Go to “TV Menu” > “Setup” > “Option” >
“Terminal setting” > “Headphone/Audio out
select”.
− Adjust the headphone volume with the i+/-
buttons on the TV.
− The headphone volume is not muted even by pressing
e (Mute) button on the remote control unit.
• When not using the headphones:
− Audio outputs from the speakers regardless of the
settings.
Go to “TV Menu” > “Setup” > “Option” >
“Screen effect” > “Programme title display”.
NOTE
Item
• This function is available only when the DTV/SAT mode
is selected.
Headphone
Audio out
Output audio through headphones.
Output audio through an A/V receiver
or surround audio controller.
Adjusting image position
Option
CAUTION
Colour system
Option
• This terminal is also used for headphones. Reduce the
volume before using headphones. Overwhelming sound
may damage your hearing.
Position
You can change the colour system to one that is
compatible with the image on the screen.
For adjusting a picture’s horizontal and vertical
position.
NOTE
Go to “TV Menu” > “Setup” > “Option” >
“Colour system”.
• If you select “Audio out” when a cable is inserted in the
HDMI 2/PC AUDIO (L/R) terminal, the TV speakers are
muted.
Go to “TV Menu” > “Setup” > “Option” >
“Screen effect” > “Position”.
NOTE
• When you select “Audio out”, you can adjust the TV
sound volume with the i+/- buttons.
• The factory preset value is “Auto”.
Item
• If “Auto” is selected, the colour system for each channel
is automatically set. If an image does not display clearly,
select another colour system (e.g., “PAL”, “SECAM”).
Centres the image by moving it to the
left or right.
H-Pos.
Option
Headphone out setting
Centres the image by moving it up or
down.
V-Pos.
Screen effect settings
You can select the headphone/speaker audio output
when using the headphones.
NOTE
Option
• Adjustments are stored separately for each input
source.
• Depending on the input signal type, “Wide mode”
setting or “Video mode” for the USB media mode, a
position setting may not be available.
• This function is not available for DTV broadcasts with
MHEG signals.
Go to “TV Menu” > “Setup” > “Option” >
“Terminal setting” > “Headphone out setting”.
Channel selecting effect
This function shows a screen effect when choosing
or changing channels.
Item
Headphone
Dual
Audio output from headphones only.
Audio output from headphones and
speakers.
Go to “TV Menu” > “Setup” > “Option” >
“Screen effect” > “Channel selecting effect”.
• This function is not available for DTV broadcasts with
MHP signals (858 series only).
• This function is available for 3D images converted from
2D images or normal 2D images.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful viewing functions
Additional features
E
When you display images by using the
USB device:
Option
Wallpaper setting
• Create a folder named “WP” in the root directory of the
USB device (the first directory when the USB device is
opened), and store into the folder the still images you
want to display for the wallpaper.
• You must insert the USB device into the USB terminal
before turning off the TV.
Option
This function is available only when “Quick start” is
set to “On (Wallpaper)”.
Activating the function will display still images when
the TV is in standby mode.
Illumination
This function makes the LED on the front of TV
illuminated in several ways.
Go to “TV Menu” > “Setup” > “Option” >
Data source
Timer setting
“Illumination”.
For the wallpaper, you can select either the still
images pre-installed in the TV or your favourite still
images stored in the USB device.
You can set the length of time the TV will remain in
the Wallpaper mode (3 hours/6 hours/12 hours/24
hours).
Item
Off
The LED is not illuminated.
The LED is illuminated while the TV is
in standby mode.
Standby
Item
NOTE
The images pre-installed in the TV will
be displayed in a slideshow.
Images stored for the wallpaper will
appear.
If only a single still image is stored in
the USB device, that image will be
displayed as the wallpaper. When there
are multiple still images in the memory,
all the images will be displayed in a
slideshow.
• Setting “Quick start” to “On” consumes more power.
• No buttons except for a work even while the still
images are being displayed.
The LED is illuminated while you watch
TV.
Pre-installed
Watch
Always
The LED is illuminated all the time.
• If the ready-for-use USB device is not inserted, the still
images pre-installed in the TV will be displayed in a
slideshow even when “Data source” is set to “USB”.
• The still images will be displayed until the set time has
elapsed.
• If you do not want to use the wallpaper as described
above, set “Quick start” to “On” or “Off”.
NOTE
• The factory default for this item is “Watch”. Set to “Off”
if you do not want the LED to illuminate.
USB
• The LED is illuminated in white for 2D mode.
• The LED is illuminated in blue for 3D mode.
Option
Option
NOTE
Quick start
Boot picture
• Images are displayed as a slideshow in 3-minute
intervals.
You can reduce the TV’s start-up time after turning
on the power with the remote control unit.
With this function activated, the SHARP logo will be
displayed when you turn on the TV.
• As a USB device cannot be detected immediately after
the TV is turned on from standby mode, the wallpaper
pre-installed in the TV may be displayed even when
“Data source” is set to “USB”. To display the USB
Wallpaper, turn on the power and wait 10 seconds
before turning off the power.
Go to “TV Menu” > “Setup” > “Option” > “Quick
start”.
NOTE
• This function is not available when the “Quick Start” is
set to “On”.
Item
• When in the wallpaper function, do not perform any
OAD operations or EPG searches.
• A timer set for recording or watching a programme will
take priority 2 minutes before the programme starts.
The TV quickly starts up from standby.
Around 15 W or more of power
consumption is required during
standby.
On
The TV enters wallpaper mode when in
standby condition.
On (Wallpaper)
Power consumption is small during
standby.
Off
49
Download from Www.Somanuals.com. All Manuals Search And Download.
Useful viewing functions
Option
Option
Game play time
Key lock
This function allows you to display the elapsed time
This function allows you to lock the buttons on the
TV or remote control unit in order to prohibit children
from changing the channel or volume.
on the screen when “AV mode” is set to “GAME”.
Go to “TV Menu” > “Setup” > “Option” > “Game
play time”.
Go to “TV Menu” > “Setup” > “Option” > “Key
lock”.
Item
Item
Under connecting a game console to
the TV, the elapsed time is displayed
in 30-minute increments after you start
playing a game.
Off
Unlocks the buttons.
On
Locks all buttons on the remote
control unit.
Locks the buttons on the TV except
the power switch.
RC control lock
Off
Hides the time.
Button control
lock
NOTE
• This menu can be selected in the case of the following
NOTE
input sources:
− EXT1–3
− HDMI1–4
− PC
• You cannot set both “RC control lock” and “Button
control lock” at the same time.
E
Cancelling the lock
Press @ on the TV and set to “Off” to cancel
the “RC control lock”. Press @ on the remote
control unit and set to “Off” to cancel the “Button
control lock”.
• Refer to page 20 for menu operation using @ on the
TV.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
Other useful features
USB-recording
USB HDD registration
It is necessary to first perform USB HDD registration
for USB HDDs used for USB-recording.
You can enjoy DTV/SAT recording or playback by
connecting a commercially available USB HDD to
the TV.
Directly connect only one USB HDD to the USB
port while registering the USB HDD (when two
or more USB HDDs are connected, USB HDD
registration is not available).
• USB-recording does not work for ATV, external
inputs, data broadcasts, radio broadcasts or network
applications.
• The screen prompt pops up.
Connecting a USB HDD
Connect a commercially available USB HDD to the
USB port of the TV.
• USB storage device: USB HDD
When the USB HDD is connected to the TV
Register the USB HDD. Follow the on-screen
instructions to register the USB HDD.
• Be sure to read the operation manual for the USB HDD.
• At least USB HDDs with memory between 100GB
and 2TB and under are required for USB-recording to
register.
• The USB 2 (HDD) port is compatible with portable USB
HDD which can operate with the power supply from the
USB port (bus powered drive).
NOTE
• Only one USB HDD for USB-recording can be registered
on the TV. Two or more USB HDDs for USB-recording
cannot be used at the same time.
• When a USB HDD is registered, formatting may be
performed. In that case, all data will be deleted.
• Refer to Disconnect the USB HDD when removing the
USB HDD (do not remove the USB HDD during USB-
recording operation).
Disconnecting the USB HDD
When you disconnect the USB HDD, be sure to the
following steps.
Go to “TV Menu” > “Setup” > “View setting” >
“USB REC setting” > “Device removal”.
NOTE
• This menu item cannot be selected when a USB HDD
for USB-recording is not registered.
• The USB HDD registration for USB-recording is
cancelled in the following cases:
− When the USB HDD is removed.
− When another USB HDD is registered for USB-
recording; only one USB HDD can be registered for
USB-recording.
NOTE
• USB-recording may take a few moments to start after
the TV is turned on.
• This function may not work properly for some USB
HDDs.
• Do not connect and disconnect a USB HDD from the TV
repeatedly.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
Other useful features
NOTE
Buttons
Description
Displays the list of the programmes
recorded by USB-recording.
How to operate USB-recording
• Refer to Regarding “Select recording device” (Page 31),
when the buttons for USB-recording do not work.
• Instead of pressing buttons on the remote control
unit, most of the operations shown to the left are also
available on the screen with the control panel. You can
call up this control panel by pressing CONTROL on the
remote control unit or select “Control (USB REC)” from
“TV Menu” > “Setup” > “Option” > “Option for view”.
• The “Audio description setting” menu does not work
during USB-recording playback.
You can enjoy DTV/SAT recording or playback by
connecting a commercially available USB HDD to
the TV.
Start recording the programme you are
watching.
• You cannot playback the recorded
programme until several seconds
after pressing REC E to start
recording.
CAUTION
REC E
• Do not unplug the AC cord or turn off the MAIN POWER
switch during USB-recording timer setting or USB-
recording.
• When the AC cord is unplugged and the MAIN POWER
switch is turned off:
− The USB-recording timer setting is cancelled.
• USB-recording may be automatically stopped when
signal reception is poor.
• Only this TV can playback the programme recorded on
the USB HDD connected to this TV. The programmes
cannot playback on other TV or PC.
• When a CAM PIN code is required for recording a
programme, it is necessary to enter the CAM PIN code
in advance (Page 12).
Stop recording.
REC STOP H
• USB-recording stops if no operation detected for three
hours.
Playback the recorded programme.
I
• When recording operations are not stopped manually,
recording will automatically stop after six hours.
• To release USB-recording, press REC STOP H, change
the DTV/SAT channel or change “INPUT”.
• Some functions do not work during USB-recording.
• USB-recording does not start automatically, but starts
only when REC E is pressed or when a USB-recording
timer setting is started.
• The PIN is required when you use the buttons such as
S, J, K, L, a, bif you set the PIN and
any options for “Parental rating” except “None” are
selected.
Stop the programme in playback and
go back to the real time broadcast
(live).
Pause the programme in playback
(USB-recording continues).
• This function is released in 15
minutes.
Reverse (each time you press this
button, the reverse speed changes in
three levels).
H
F
S
J
SHARP corporation bears no responsibility regarding
compensation for content when recording cannot does
not take place, loss of recorded data or other direct or
indirect damages related to these matters. Please be
forewarned.
Fast forward (each time you press this
button, the fast forward speed changes
in three levels).
Jump backward to the previous
chapter point*.
• Do not disconnect the USB-HDD used for USB-
recording during USB-recording operation.
• MHP services do not work during USB-recording
playback (858 series only).
K
L
E
Buttons for USB-recording operation
Jump forward to the next chapter
point*.
Remote control unit
Control panel
Playback will resume after jumping
backward by the time interval you set
in “Jump time setting” (Page 54).
Playback will resume after jumping
forward by the time interval you set in
“Jump time setting” (Page 54).
a
b
* Chapter points are fixed at 10 minute increments.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
Other useful features
USB-recording
You can record the programme you are watching to
the registered USB HDD.
• A message will be displayed when the scheduled time
overlaps with an existing schedule. Make changes in
accordance with the on-screen instructions.
• It is not possible to newly schedule a recording that
overlaps with a timer setting that is currently running
(recording). When urgent setting of a schedule is
desired, stop recording before scheduling.
• A combined total of 16 timer settings (“Watch” and
“Record”) can be set.
• A CAM (CI Plus v1.3) PIN code may be necessary
to record broadcasts scrambled due to parental
rate settings. When a CAM PIN code is required for
recording a programme, it is necessary to enter the
CAM PIN code in advance (Page 12).
Manual clock setting
When the TV cannot receive the time via digital
broadcast, perform “Manual timer setting” after
setting the clock.
Starting USB-recording
Go to “TV Menu” > “View setting” >
“Individual setting” > “Clock setup” > “Time
adjustment”.
Press REC E.
• The TV starts USB-recording.
NOTE
NOTE
• You cannot set the manual clock setting during USB-
• You can also operate from the control panel by pressing
CONTROL.
recording.
• You cannot switch the channel or the input source
during USB-recording.
• During USB-recording, the TV cannot display photos
or play music from the internet, Home network, or USB
storages.
Timer list
If a CAM PIN code is not entered or is entered
incorrectly, the programme will not be able to be
recorded/played back.
A list of programmes scheduled for recording can be
displayed.
1 Press EPG.
EPG timer setup
• You may not record programmes.
2 Press B to display the timer list.
You can select the programme you want to record
and set the timer setting with EPG (Pages 23 and 24).
Completing USB-recording
USB-recording playback
To playback the recorded programmes, open
the USB-recording list and select the desired
programme.
1 Press REC STOP H.
Manual timer setting
• The screen prompt pops up.
2 Press c/d to select “Yes”, and then press ;.
“Manual timer setting” enables you to set date,
recording start/stop time and channel.
1 Press EPG.
2 Press B to display the timer list.
• USB-recording has completed.
1 Go to “HOME” > “Record list”.
NOTE
2 Press “OK” button.
• You can also operate from the control panel by pressing
• Press H to return the scene that is broadcasting.
CONTROL.
3 Press B again to display the “Manual timer
NOTE
setting” screen.
USB-recording timer setting
You can set the USB-recording timer setting for
programmes you want to record.
• You may not playback recorded programmes when the
programme provider restricts or completely prevents
recording or later watching of an encoded programme.
• Depending on the protection signal specified by a
broadcast station, recorded broadcasts can only be
played back for a certain period of time or cannot be
played back at all (Page 12).
4 Set date, recording start/stop time and channel.
5 Press c/d to select “Record”, and then press
;.
NOTE
• A confirmation screen will be displayed for the timer
• To prevent the first part of the programme from being
cut, start recording the programme a few seconds
earlier than time set to start recording.
setting.
6 Press c/d to select “Yes”, and then press ;.
• When recording/viewing timer settings are set
continuously for multiple programmes, schedule the
recording of the previous programme to end earlier than
the end of the programme itself. Recording/viewing
timer setting of the next programme will start after that.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
Other useful features
Time shift playback
Playback recorded scenes of the programme being
recorded.
Counter
View setting
The counter displays on the screen with the control
panel.
Jump time setting
You can set the time interval for playback to resume
after jumping backwards/forward.
Press d during recording.
• Press H to return the scene that is broadcasting.
00:02:38/00:08:18
Go to “TV Menu” > “Setup” > “View setting” >
“USB REC setting” > “Jump time setting”.
• A time interval from 10 sec. to 99 min. 50 sec can
be selected.
NOTE
Current playback time
• Hidden during recording
n
• You can also operate from the control panel by pressing
CONTROL.
Total playback time of the content
The grey bar shows how much time has
o
p
• Time shift playback may take a few moments to start.
• Time shift playback will stop and the TV will return to
normal broadcasting when a program is fast-forwarded
to a scene that is near to the scene currently being
broadcast. The timing at which it returns depends on
the speed of fast-forwarding.
• Depending on the protection signal specified by a
broadcast station, recorded broadcasts can only be
played back for a certain period of time or cannot be
played back at all (Page 12).
NOTE
• You can use the time interval you set using the aor
bbuttons.
progressed.
• Hidden during recording or playback-during-
recording
View setting
Device registration
NOTE
• You can also call up the information above by pressing
CONTROL on the remote control unit or select “Control
(USB REC)” from “TV Menu” > “Setup” > “Option” >
“Option for view”.
You need to perform this function to register the
USB HDD for the USB-recording.
Go to “TV Menu” > “Setup” > “View setting” >
“USB REC setting” > “Device registration”.
• Refer to USB HDD registration (Page 51).
Display information regarding USB-
recording
View setting
Auto input selection
NOTE
Channel display
Channel information displays by pressing p on the
remote control unit.
• Only one USB HDD can be registered for USB-
recording. Remove all USB HDDs except the one used
for USB-recording.
• At least USB HDDs with memory between 100GB
and 2TB and under are required for USB-recording to
register.
You can choose whether or not to switch the input
source automatically when receiving an AQUOS
LINK or an Euro SCART compatible signal on the TV
during USB-recording operations.
Go to “TV Menu” > “Setup” > “View setting” >
“USB REC setting” > “Auto input selection”.
• Some USB HDDs, such as ones which have multiple
drives, etc., cannot be used for USB-recording.
Item
View setting
Audio (ENG)
Video
Subtitle
STEREO
Off
Release USB-recording when receiving
an AQUOS LINK or a Euro SCART
compatible signal. Switch input source
automatically.
Device format
Enable
>> New information
You can format all data on the USB HDD.
The recording icon shows up when REC E is
pressed and the TV is recording the programme.
The status icon shows up depending on what
is shown on the screen.
n
o
Go to “TV Menu” > “Setup” > “View setting” >
“USB REC setting” > “Device format”.
USB-recording continues to work.
The TV does not switch input source
Disable automatically even when receiving
an AQUOS LINK or a Euro SCART
NOTE
• Once formatting has been completed, data cannot be
restored.
compatible signal.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
Other useful features
USB media/Home network
Selecting modes and drives/servers
Photo mode
1 Press B.
USB media/Home network
Viewing thumbnails
In both modes, you can enjoy viewing photos,
listening to music and watching videos from external
USB devices (USB Memory, USB card reader (Mass
Storage Class), USB HDD) or Home network server.
When the USB media menu is displayed
1 Press a/b to select “Select USB drive”, and then
press ;.
• The available selections are “Select USB drive”
and “Folder display setting”.
2 Press a/b/c/d to select the USB device where
you want to find your files, and then press ;.
• You can select from “All” or “Folder” for the type
of folder directory in “Folder display setting”.
NOTE
• To connect a Home network server, refer to Network
setup (Page 64).
• This function may not work properly for some USB
storage devices.
• The corresponding file format is different between “USB
media” and “Home network”.
* This screen image is for the USB media mode. It
may be slightly different in the Home network mode.
When the Home network menu is displayed
Press a/b to select the Home network server where
you want to find your files, and then press ;.
• Press Y to search for servers.
• “Wide mode” is fixed during “Photo mode”. During
“Video mode”, you can select “Auto” or “Original”.
• Depending on the Home network server, the TV may not
be able to recognise the contained data.
• Use only alphanumeric characters for naming files.
• Do not disconnect a Home network server from the TV
while transferring files, using the slide show function,
when a screen is switching to another or before you exit
“Home network” from the “HOME” or “INPUT” menu.
• Do not connect and disconnect a Home network server
from the TV repeatedly.
• Depending on the USB device, the TV may not be able
to recognise the contained data.
• Use only alphanumeric characters for naming files.
• File names over 80 characters (may vary depending on
the character set) may not be displayed.
Buttons for thumbnail operations
(When using USB media mode)
Buttons
Description
2 Press c/d to select among “Photo mode”,
“Music mode” or “Video mode”, and then press
;.
When selecting a folder icon: Enter this directory.
When selecting a photo thumbnail: Enlarge the photo.
;
a/b/c/d
(Cursor)
Select a desired item.
Music mode
All*: Return to the previous screen.
Folder*: Return to the upper folder. When the top
folder is displayed, return to the top menu screen.
Video mode
6
Photo mode
Select/deselect items (✔ mark appears on the
selected items).
R button
NOTE
All*: Select BGM for the slide show.
Folder*: Move to the top menu screen.
• The explanations for the buttons that can be used in
each mode are the explanations when using USB media
mode. Some operations may differ in Home network
mode. Follow the guide display during operations.
• You do not need to select the drive/server in step 1
when there is only one drive in the connected USB
device or there is only one Home network server
connected to the TV.
G button
Y button
Start the slide show.
• Do not disconnect a USB device or memory card from
the TV while transferring files, using the slide show
function, when a screen is switching to another or
before you exit “USB media” from the “INPUT” menu.
Display “USB media menu”.
• 3D display
• Select slide show interval
• Select slide show BGM
• Set all slide show image
• Reset all slide show image
• USB device removal
B button
Selecting the mode
• 16 is the maximum number of drives that can be
displayed in USB media mode.
• 10 is the maximum number of servers that can be
displayed in Home network mode.
• You cannot enter these modes when there is no server
connected to the TV in Home network mode.
Common operation
Select “USB media” or “Home network” from the
“HOME” or “INPUT” menu to enter this mode.
* The mode selected in “Folder display setting”
NOTE
• When there are invalid photo files, the g mark will be
displayed for the file.
• The 3D mode icon appears on the thumbnails of 3D
images. If you do not switch to 3D mode for the 3D
images, they will be displayed in 2D.
• You can see the file name, shooting date, file size and
pixel size of the selected photo on the left of the screen
(shooting date is only available in the EXIF file format).
55
Download from Www.Somanuals.com. All Manuals Search And Download.
Other useful features
Folder*: Return to the upper folder. When the
top folder is displayed, return to the thumbnail
6
Buttons for enlarged photo display operation
(When using USB media mode)
*
This screen image is for the USB media mode. It
may be slightly different in the Home network mode.
Buttons for music mode
(When using USB media mode)
Buttons
Description
When selecting a music file: Play music.
;
a/b/c/d
(Cursor)
Select a desired item.
When music is being played: Stop music.
When music is stopped:
All*: Return to the previous screen.
Folder*: Return to the upper folder. When the
top folder is displayed, return to the top menu
screen.
6
Select/deselect items (✔ mark appears on the
selected items).
R button
All*: Stop music.
Folder*: Stop music and move to the top menu
screen.
G button
Y button
Play/pause music.
Display “USB media menu”.
• Set all auto play
• Reset all auto play
• USB device removal
B button
* The mode selected in “Folder display setting”
NOTE
• When there are invalid music files, the g mark will be
displayed for the file.
• The displayed play time may differ slightly from the
actual play time depending on the files.
Download from Www.Somanuals.com. All Manuals Search And Download.
Other useful features
Video mode
Buttons for playing mode
(When using USB media mode)
Disconnecting the USB device
When you disconnect the USB device, be sure to
the following steps.
Buttons
Description
Buttons for file selecting operations
(When using USB media mode)
When video is being played: Pause the video.
When video is paused: Play the video.
;
1 Press B on the remote control unit.
Buttons
Description
• Display “USB media menu”.
Go to the beginning of a file by pressing a once
and the previous file by pressing a twice.
a (Cursor)
When selecting a folder icon: Enter this
directory.
When selecting a video file: Play the video.
2 Press a/b to select “USB device removal”, and
;
Go to the next file.
b (Cursor)
then press ;.
c/d
(Cursor)
a/b/c/d
(Cursor)
3 Press c/d to select “Yes”, and then press ;.
Reverse/fast forward a video.
Select a desired item.
6
Go back to the file selection screen.
Switch between 2D and 3D modes.
All*: Return to the previous screen.
Folder*: Return to the upper folder. When the
top folder is displayed, return to the top menu
screen.
3D mode
You can view photos in 3D mode.
3D
6
Start playback from the previously stopped
scene.
R button
1 Press B to display the “USB media menu”
Select/deselect items (✔ mark appears on the
selected items).
screen.
G button
Y button
Stop a video.
R button
Display the USB control panel.
2 Press a/b to select “3D display”, and then
press ;.
All*: -
G button
Y button
Display “USB media menu”.
• Title (edition)
• Chapter
• Show video information
• USB device removal
Folder*: Move to the top menu screen.
• See pages 68_77 for details on the 3D function.
Play the video file from the top of the file.
B button
NOTE
Display “USB media menu”.
• Set all auto play
• Reset all auto play
• USB device removal
• In 3D mode, you cannot rotate the photos.
• You can select “3D display” from “USB media menu”
only when the thumbnails screen for the photo mode in
USB media mode is displayed on the screen.
B button
Jump to scenes at 10% increments (0%–90%).
• Limited to files without chapters.
0–9
* The mode selected in “Folder display setting”
p
Reveal/hide the guide display.
NOTE
• Reverse/fast forward continues from one file to another
during continuous playback.
• Instead of pressing buttons on the remote control unit,
the operations above are also available on the screen
with the control panel. You can display this control
panel by pressing CONTROL on the remote control
unit or select “Control (USB media)” or “Control (Home
network)” from “TV Menu” > “Setup” > “Option” >
“Option for view”.
• The buttons in the EXT MEDIA on the remote control
unit perform the same operations as those on the
control panel.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
Other useful features
Video file format
View setting
Home network server compatibility
File
DivX® setup
Container
Video
Audio
extension
Photo file format JPEG
Music file format LPCM, MP3
DivX
3.11/4.x/5.1/6.0
XviD
H.264
MPEG4
Motion Jpeg
DivX
3.11/4.x/5.1/6.0
XviD
This is the function to confirm your registration code.
MP3
Dolby Digital
DTS
LPCM
ADPCM
MPEG2-PS, MPEG2-TS, WMV, ASF,
MP4, MOV, AVI
.avi
AVI
Video file format
Go to “TV Menu” > “Setup” > “View setting” >
“DivX® setup”.
NOTE
E
DivX® VOD registration
You can find your registration code on this menu.
playing the DivX content.
• Progressive format jpeg files are not supported.
• Some video file formats may not be played depending
on the file and server.
MP3
Dolby Digital
DTS
.mkv
MKV
H.264
LPCM
Selecting the picture size for video
mode
MPEG4
ADPCM
E
DivX® VOD deregistration
DivX
3.11/4.x/5.1/6.0
XviD
MPEG4
VC-1
Windows Media
Video v9
You can find your deregistration code on this menu.
release the registration.
MP3
Dolby Digital
LPCM
You can select the picture size in “Video mode”.
.asf
.wmv
ASF
1 Select “Video mode”.
• Refer to Selecting modes and drives/servers on
page 55.
USB device compatibility
WMA
USB memory, USB card reader (Mass
USB device
2 Press f.
MP3
Dolby Digital
Dolby Digital Plus
AAC
Storage class), USB HDD
H.264
MPEG4
Motion Jpeg
• The “Wide mode” menu displays.
.mp4
.mov
MP4
File system
Photo file
format
FAT/FAT32, NTFS
JPEG (.jpg) (DCF2.0 compliant),
MP (.mpo) (CIPA DC-007)
3 Press f or a/b to select the desired item.
• As you toggle the options, each is immediately
reflected on the screen. There is no need to press
;.
Dolby Digital
MPEG
.mpg
.mpeg
MPEG2
MPEG1
MP3 (.mp3)
PS
Bitrate: 32 k, 40 k, 48 k, 56 k, 64 k, 80 k,
96 k, 112 k, 128 k, 160 k, 192 k, 224 k,
256 k, 320 kbps
Sampling frequency: 32 k, 44.1 k, 48 kHz
FLAC (.flac)
Bitrate: 128 kbps – 2304 kbps
Sampling frequency: 8 k, 16 k, 22.05 k,
24 k, 32 k, 44.1 k, 48 k, 88.2 k, 96 kHz
WMA (.wma)
Bitrate: 32 kbps – 192 kbps
Sampling frequency: 8 k, 11.025 k, 16 k,
22.05 k, 32 k, 44.1 k, 48 kHz
LPCM
MP3
AAC
EXAMPLE
Sorenson
H.264
.flv
FLV
Music file
format
NOTE
• Progressive format jpeg files are not supported.
• Files in USB 1.1 devices may not be played properly.
• Operation using USB hubs is not guaranteed.
• Some video file formats may not be played depending
on the file.
• Some USB devices may not work properly depending
on the file system.
Item
Keeps the original aspect ratio in a
full screen display.
Auto
Subtitle file
format
SRT/SUB/ASS/SSA/SMI
Keeps the original aspect ratio and
size.
Original
Full
An image fully fills the screen.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a PC
Connecting a PC
Analogue connection
Displaying a PC image on the TV
PC
PC terminal*
HDMI connection
Selecting the picture size
You can select the picture size.
PC
HDMI 1, 2, 3 or 4 terminal
1 Press f.
• The “Wide mode” menu displays.
2 Press f or a/b to select the desired item.
EXAMPLE
RGB cable
(commercially
available)
ø 3.5 mm stereo
q
r
minijack cable
(commercially
available)
HDMI-certified cable (commercially available)
n
PC
PC terminal*
PC
HDMI 2 terminal*
Normal
Full
Item
Keeps the original aspect ratio in a full
screen display.
For letterbox pictures. Bars may
appear on the top and bottom with
some programmes.
Normal
Cinema
DVI/RGB conversion
cable
(commercially
available)
ø 3.5 mm stereo
minijack cable
(commercially
available)
s
t
ø 3.5 mm stereo
minijack cable
(commercially
available)
DVI/HDMI cable
(commercially
available)
o
p
Full
An image fully fills the screen.
* When using the PC terminal, you must select
“Video+Audio” in the “Audio select” menu (refer to page
47 for details).
Displays an image with the same
number of pixels on the screen.
Dot by Dot
* When using the HDMI 2 terminal, you must select the
proper item in the “Audio select” menu depending on
the type of HDMI cable connected (refer to page 47 for
details).
NOTE
NOTE
• You can also select an item from the “Wide mode” menu
(Page 46).
• Connect the PC before making adjustments.
• Selectable picture size may vary with input signal type.
• You may not be able to change the wide mode while in
3D mode.
• For PC-connection via the PC terminal, a cable with
ferrite cores is recommended.
• The PC input terminals are DDC 2B-compatible.
• Refer to page 61 for a list of PC signals compatible with
the TV.
• Refer to page 46 for AV signals.
HDMI: 480i/480p/576i/576p/720p/1080i/1080p
• The PC terminal is not compatible with 480i/576i/1080p
signals.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a PC
Adjusting the PC image
automatically
Adjusting the PC image manually
Option
Fine sync.
Option
Auto sync.
Ordinarily you can easily adjust the picture as
necessary to change image position using “Auto
sync.”. In some cases, however, manual adjustment
is needed to optimise the image.
This function enables the screen to be automatically
adjusted to its best possible condition when the
analogue terminals of the TV and PC are connected
with a commercially available DVI/RGB conversion
cable, etc.
1 Press b to select “PC” from the “INPUT”
menu, and then press ;.
2 Go to “TV Menu” > “Setup” > “Option” >
“Terminal setting” > “PC signal setting” > “Fine
sync.”.
1 Press b to select “PC” from the “INPUT”
menu, and then press ;.
2 Go to TV Menu” > “Setup” > “Option” >
“Terminal setting” > “PC signal setting” > “Auto
sync.”.
3 Press a/b to select the specific adjustment
item.
4 Press c/d to adjust the item to the desired
NOTE
position.
• When “Auto sync.” is successful, “Auto Sync completed
successfully” displays. If not, “Auto sync.” failed.
• “Auto sync.” may fail even if “Auto Sync completed
successfully” displays.
Item
Centres the image by moving it to the
left or right.
H-Pos.
• “Auto sync.” may fail if the PC image has low resolution,
has unclear (black) edges, or is moved while executing
“Auto sync.”.
Centres the image by moving it up or
down.
V-Pos.
• Be sure to connect the PC to the TV and switch it on
before starting “Auto sync.”.
• “Auto sync.” can be executed only when inputting
analogue signals through the PC terminal.
• This function is available for 3D images converted from
2D images or normal 2D images.
Adjusts when the image flickers with
vertical stripes.
Adjusts when characters have low
contrast or when the image flickers.
Clock
Phase
NOTE
• For resetting all adjustment items to the factory preset
values, press a/b to select “Reset”, and then press
;.
• “Clock” and “Phase” in the “Fine sync.” menu can be
adjusted only when inputting analogue signals through
the PC terminal.
• This function is available for 3D images converted from
2D images or normal 2D images.
60
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a PC
PC compatibility chart
Horizontal
Vertical
Analogue
(D-Sub)
Digital
(HDMI)
VESA
standard
Resolution
frequency frequency
VGA
640 x 480
800 x 600
31.5 kHz
37.9 kHz
48.4 kHz
47.7 kHz
60 Hz
60 Hz
60 Hz
60 Hz
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
SVGA
XGA
1,024 x 768
1,360 x 768
WXGA
1,280 x
1,024
SXGA
SXGA+
UXGA
1080p
64.0 kHz
65.3 kHz
75.0 kHz
67.5 kHz
60 Hz
60 Hz
60 Hz
60 Hz
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
1,400 x
1,050
1,600 x
1,200
1,920 x
1,080
VGA, SVGA, XGA, WXGA, SXGA, SXGA+ and UXGA are registered trademarks
of International Business Machines Corporation.
NOTE
• This TV has only limited PC compatibility, correct operation can only be guaranteed if
the video card conforms exactly to the VESA 60 Hz standard. Any variations from this
standard will result in picture distortions.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a PC
Command format
Eight ASCII codes +CR
PC control of the TV
IP Control setup
• When a programme is set, the TV can be controlled
from the PC using RS-232C or IP. The input signal (PC/
video) can be selected, the volume can be adjusted and
various other adjustments and settings can be made,
enabling automatic programmed playing.
• Use an RS-232C serial control cable (cross type),
ETHERNET cable (commercially available) or wireless
LAN USB adapter for the connections.
1 Go to “HOME” > “IP Control” > select “Change”.
2 To use IP Control, select “Enable”.
3 Set the device name.
4 Set your login ID and password.
5 Set the port to use with IP Control.
6 Confirm the settings, and then press “OK”.
C1 C2 C3 C4 P1 P2 P3 P4
n
o
p
Command four digits: Command. The text of
four characters.
Parameter four digits: Parameter 0_9, blank, ?,
minus
n
o
p
NOTE
Communication conditions for RS-232C
• This operation system should be used by a person who
Return code (0DH): ?
is accustomed to using PCs.
Parameter
Communication conditions for IP
Input the parameter values, aligning left, and fill with
blank(s) for the remainder (be sure that four values
are input for the parameter).
RS-232C serial control cable (cross type)
(commercially available)
When the input parameter is not within an adjustable
range, “ERR” returns (refer to “Response code
format”).
LAN
Set the RS-232C communications settings on the
PC to match the TV’s communications conditions.
The TV’s communications settings are as follows:
ETHERNET cable (commercially available)
Connect to the TV with the following settings made
for IP on the PC.
0
Baud rate
Data length
Parity bit
9,600 bps
8 bits
0
1
0
0
0
0
0
0
5
9
IP protocol
TCP/IP
Set the IP address on the TV
menu
None
Host IP address
Stop bit
1 bit
None (Do not select Telnet
or SSH)
Flow control
None
Service
5
Set a port number on the TV
menu (Control port)
Communication procedure
TCP port#
When “?” is input for some commands, the present
Send the control commands from the PC via the
RS-232C connector.
setting value responds.
When you set your ID and password on the TV
menu, you need to enter them as soon as you
connect to the TV.
The TV operates according to the received
command and sends a response message to the
PC.
Do not send multiple commands at the same time.
Wait until the PC receives the OK response before
sending the next command.
?
?
?
?
Response code format
NOTE
• The connection will be cut off when there has been no
communication for 3 minutes.
Normal response
Problem response
(communication error or
incorrect command)
Make sure to send “A” with the carriage return and
confirm that “ERR” returns before operating.
O
K
E
R
R
Return code (0DH)
Return code (0DH)
62
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a PC
Command list
CONTROL
ITEM
CONTROL
ITEM
CONTROL
ITEM
COMMAND PARAMETER CONTROL CONTENTS
COMMAND PARAMETER CONTROL CONTENTS
COMMAND PARAMETER CONTROL CONTENTS
POWER
SETTING
P
I
O
T
W
G
R
D
0
_
_
_
_
_
_
_
POWER OFF
(STANDBY)
AV MODE
SELECTION
A
A
V
V
V
V
V
V
V
V
V
V
V
V
V
O
P
P
L
H
I
M
M
M
M
M
M
M
M
M
M
M
M
M
L
D
D
D
D
D
D
D
D
D
D
D
D
D
M
S
S
K
E
0
1
2
3
4
5
6
7
8
1
1
1
1
*
_
_
_
_
_
_
_
_
_
4
5
6
0
*
_
_
_
_
_
_
_
_
_
_
_
_
0
_
*
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
TOGGLE
SURROUND
A
A
A
A
A
C
C
C
C
C
S
S
S
S
S
U
U
U
U
U
0
1
2
4
5
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
SURROUND TOGGLE
SURROUND ON
STANDARD
MOVIE
INPUT
SELECTION A
INPUT SWITCHING
(TOGGLE)
A
SURROUND OFF
A
GAME
SURROUND 3D HALL
I
I
T
V
T
D
V
_
_
_
_
_
_
_
_
TV (CHANNEL FIXED)
A
USER
SURROUND 3D
MOVIE
D
DTV (CHANNEL
FIXED)
A
DYNAMIC (Fixed)
DYNAMIC
A
A
C
C
S
S
U
U
6
7
_
_
_
_
_
_
SURROUND 3D
STANDARD
A
I
A
V
D
H
*
*
_
*
_
_
_
_
EXT 1_3 (1_3), HDMI
1_4 (4_7), PC (8)
A
PC
SURROUND 3D
STADIUM
CHANNEL
D
C
C
TV DIRECT CHANNEL
(1_99)
A
x.v.Colour
A
STANDARD (3D)*2
MOVIE (3D)*2
GAME (3D)*2
AUTO
AUDIO CHANGE
SLEEP TIMER
A
O
O
O
C
F
F
F
H
T
T
T
A
_
0
1
2
_
_
_
_
_
_
_
_
_
_
_
_
TOGGLE
C
C
D
H
H
T
U
D
V
P
W
D
_
_
*
_
_
*
_
_
*
_
_
_
CHANNEL UP
A
M
M
M
OFF
CHANNEL DOWN
A
SLEEP TIMER 30 MIN
THREE DIGIT DIRECT
CHANNEL (1_999)
(Non-Nordic countries)
A
SLEEP TIMER
1 HOUR
VOLUME
V
VOLUME (0_60)
H-POSITION (AV/PC)
V-POSITION (AV/PC)
CLOCK (0_180)
PHASE (0_40)
TOGGLE (AV)
NORMAL (AV)
ZOOM 14:9 (AV)
PANORAMA (AV)
O
O
O
F
F
F
T
T
T
M
M
M
3
4
5
_
_
_
_
_
_
_
_
_
SLEEP TIMER
1 HOUR 30 MIN
POSITION
H
V
O
O
C
*
*
D
T
V
D
*
*
*
*
FOUR DIGIT DIRECT
CHANNEL (1_9999)
(Nordic countries
only)*1
*
*
*
SLEEP TIMER
2 HOUR
C
P
*
*
*
S
*
*
_
_
_
_
_
_
I
D
S
S
S
S
E
C
C
C
C
G
1
2
3
4
_
*
*
*
*
_
*
*
*
*
_
*
*
*
*
_
*
*
*
*
DIGITAL NETWORK
CHANGE*1
SLEEP TIMER
2 HOUR 30 MIN
WIDE MODE
W
W
W
W
W
D
E
0
1
2
3
4
_
_
_
_
_
D
D
D
D
DVB-S/S2 1 DIRECT
I
D
E
TELETEXT
3D
T
T
E
E
C
X
X
P
T
T
0
1
*
_
_
*
_
_
*
_
_
_
TELETEXT OFF
CHANNEL (1_9999)*1
I
D
E
TELETEXT ON (TOGGLE)
DVB-S/S2 2 DIRECT
I
D
E
D
G
DIRECT PAGE JUMP
(100_899)
CHANNEL (1_9999)*1
I
D
E
FULL (AV/USB-Video/
Home network-Video)
DVB-S/S2 3 DIRECT
T
T
T
T
T
T
T
T
T
D
D
D
D
D
D
D
D
V
C
C
C
C
C
C
C
C
N
H
H
H
H
H
H
H
H
M
0
1
2
3
4
5
6
7
1
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
3D OFF
CHANNEL (1_9999)*1
W
W
W
W
W
W
W
W
I
I
I
I
I
I
I
I
D
D
D
D
D
D
D
D
E
E
E
E
E
E
E
E
5
6
7
8
9
1
1
1
_
_
_
_
_
0
1
2
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
CINEMA 16:9 (AV)
CINEMA 14:9 (AV)
NORMAL (PC)
2D s 3D
DVB-S/S2 4 DIRECT
CHANNEL (1_9999)*1
SIDE BY SIDE
TOP AND BOTTOM
3D s 2D (SIDE BY SIDE)
3D s 2D (TOP AND BOTTOM)
3D AUTO
D
D
I
T
T
U
D
P
P
P
P
W
1
_
_
0
1
2
_
_
_
_
_
_
_
_
_
_
_
_
_
_
_
DTV CHANNEL UP
DTV CHANNEL DOWN
EXT 1 (Y/C)
CINEMA (PC)
FULL (PC)
INPUT
SELECTION B
N
N
N
DOT by DOT (AV/PC)
UNDERSCAN (AV)
I
1
EXT 1 (CVBS)
3D s 2D*2
I
1
EXT 1 (RGB)
AUTO (USB-Video/
Home network-Video)
DEVICE NAME
DISPLAY THE DEVICE
NAME
W
I
D
E
1
3
_
_
ORIGINAL (AV/USB-
Video/Home network-
Video)
SOFTWARE
VERSION
S
I
W
P
V
P
N
Y
1
1
_
_
_
_
_
_
DISPLAY THE
SOFTWARE VERSION
IP PROTOCOL
VERSION
DISPLAY THE IP
PROTOCOL VERSION
MUTE
M
M
M
U
U
U
T
T
T
E
E
E
0
1
2
_
_
_
_
_
_
_
_
_
TOGGLE
MUTE
I 857 series only
J These commands are available only during 3D mode.
MUTE OFF
63
Download from Www.Somanuals.com. All Manuals Search And Download.
Network setup
4 Press a/b to select “Wired”, and then press
Connecting to the network
Wired installation
;.
Use an ETHERNET cable to connect the ETHERNET
terminal on the TV to your broadcast router as
shown below. This is recommended when enjoying
services which require stable connection speeds,
such as streaming media.
5 Confirm the message on the screen and then
To enjoy internet services, you need to connect the
TV to a router with a high speed connection to the
internet. You can also connect the TV to your Home
network server through a router or access point. The
TV connection to the router can either be wired or
wireless.
press ; to go to the next step.
6 Perform “Connection test” after the connection
is completed. Press c/d to select “Yes”, and
then press ;.
7 The connection test result will be displayed on
the screen. Follow the on-screen instructions for
the settings after this step.
E
Wired connection overview
NOTE
• If you choose a wired connection to the router, you need
an ETHERNET cable (commercially available).
• If you do not have a broadband internet connection,
consult the store where you purchased your TV or ask
your internet service provider or telephone company.
• An Ethernet and wireless connection cannot be used at
the same time. Use only one of the connection types.
• A wireless LAN connection and performance cannot
be guaranteed for all residential environments. In the
following cases, the wireless LAN signal may be poor or
drop, or the connection speed may become slower.
− When used in buildings made with concrete,
reinforced steel, or metal
• If you want to change the IP settings manually, go
to “Network setup” > “Manual setup” > “IP setup”
and follow the on-screen instructions and the
operation manual of the router.
PC
n
Router (commercially available)
ETHERNET cable (commercially available)
Network
o
p
q
− When placed near objects that obstruct the signal
− When used with other wireless devices that emit the
same frequency
− When used in the vicinity of microwave ovens and
other devices that emit a magnetic field, electrostatic
charge, or electromagnetic interference
E
How to connect
Router
ETHERNET terminal
• A stable connection speed is required to play back
streaming content. Use an Ethernet connection if the
wireless LAN speed is unstable.
LAN
• Please use Category 5 ETHERNET cable.
ETHERNET cable (commercially available)
n
1 Switch on the router (commercially available).
Refer to the router’s operation manual for
switching on.
2 Connect the ETHERNET terminal on the TV
to the router (commercially available) with an
ETHERNET cable (commercially available).
3 Go to “Network setup” > “Auto setup”, and then
press ;.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
Network setup
E
NOTE
How to connect
Wireless installation
• When not using “Push button”, perform the settings
from “Network setup” > “Manual setup” > “Connection
type”.
• To connect your TV to the internet, you must have a
broadband internet connection.
Use the wireless LAN USB adapter supplied with the
TV.
E
Wireless connection overview
• If you do not have a broadband internet connection,
consult the store where you purchased your TV or ask
your internet service provider or telephone company.
• There is no need to enter the security key for
subsequent connections to the wireless network.
• If your access point is set to a stealth mode (that
prevents detection by other devices), you may not be
able to establish a connection. In this case, disable the
stealth mode on the access point.
• If you want to change the IP settings manually, go to
“Network setup” > “Manual setup” > “IP” setup” and
follow the on-screen instructions and the operation
manual of the router.
1 Switch on your router before starting the
network installation.
2 Connect the wireless LAN USB adapter
(supplied) to the USB 3 (WIRELESS LAN) port on
the rear of the TV.
PC
n
Wireless LAN router/access point
Wireless LAN USB adapter (supplied)
Network
o
p
q
• Do not use a wireless LAN adapter other than
the supplied SHARP wireless LAN adapter, as
operations cannot be guaranteed.
• See page 85 to check the supplied SHARP wireless LAN
adapter specifications.
3 Go to “Network setup” > “Auto setup”, and then
NOTE
press ;.
NOTE
• When using the SHARP wireless LAN USB adapter
(supplied), try to provide as much free space around the
device for best performance.
• Follow the on-screen instructions when setting
manually.
• Make sure the firewalls in your network allows access to
the TV wireless connection.
Go to “Network setup” > “Manual setup”.
• Operations cannot be guaranteed when used with
access points that do not have Wi-Fi® certification.
• A wireless LAN access point is required to connect
the TV to the Internet using a wireless LAN. See the
operation manual of your access point for setup.
4 Press a/b to select “Wireless”, and then press
;.
5 Confirm the WPS location and then press ; to
go to the next step.
6 Perform “Connection test” after the connection
is completed. Press c/d to select “Yes”, and
then press ;.
7 The connection test result will be displayed on
the screen. Follow the on-screen instructions for
the settings after this step.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
Net TV
What is Net TV?
Operations in Net TV
Basic operation
The illustrations on this page are for explanation
purposes. They are subject to change without
notice.
Option menu
Press CONTROL and the option menu displays.
Press a/b to select the desired menu item, and
then press ;.
Net TV offers internet service and websites tailored
for your TV. Use the TV remote control unit to
browse the Net TV internet pages. Net TV allows you
to play movies, view pictures, listen to music, play
games, rent a movie from a video store* and much
more. Net TV provides variety of services for each
country. You can browse other countries’ service as
well. If a service is unsuitable for children, you can
lock it as needed.
E
User setting
Changes some settings, such as lock/unlock the
service, for Net TV.
NOTE
• This may not function for some services.
1 Select “User setting”, and then press ;.
* Video store can only be used with country-exclusive
special Net TV services.
2 Press a/b/c/d to select the desired
operation, and then press ;.
NOTE
• Because Net TV is an online system, it can be modified
over time to better serve its purpose.
E
Control panel
Displays an on-screen control panel for watching
online contents.
• Some Net TV services may be added, changed or
discontinued after some time.
• Some open internet websites may not be tailored for a
TV screen and may not be displayed correctly.
• You cannot download and save files nor install plug-ins.
E
Display the start page
Go to “HOME” > “AQUOS NET+”.
1 Select “Control panel”, and then press ;.
2 Press a/b/c/d to select the desired
operation, and then press ;.
NOTE
DISCLAIMERS
3 Press > to exit.
• When switching to Net TV, a message which requests a
software update may display in some cases.
• SHARP corporation bears no responsibility regarding
the content and quality of the content provided by the
content serve provider.
E
Select a service
Press a/b/c/d to select the desired service,
and then press ;.
• Press :r/s to scroll pages up/down (This may
not function for some services).
• Press 6 to return to the previous page (This may
not function for some services).
Buttons
Description
I
Playback
Stop
• Press > to return to the Net TV start page.
H
F
E
Exit Net TV
Pause
Press ATV/DTV/SAT.
• You can exit from Net TV by pressing b and
select another input source.
J
G
Fast forward
Reverse
NOTE
• These operations can also be done by pressing the
corresponding buttons (I/H/F/J/G) on the
remote control unit.
• The control panel may not function on some services.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
Net TV
E
NOTE
Reload
Rent and download a video
• PIN input is required when executing “Clear Net TV
memory”. The default PIN is “1234”. To change the PIN
setting, refer to Individual setting — PIN (Page 44).
To reset the PIN setting (PIN input will no longer be
needed), refer to Reset the PIN (Page 79).
• This function is available only while browsing Net TV.
Refreshes the page you are browsing. If an error
occurs while loading the page, execute this function
and reload it.
With Net TV, you can rent a video from “Video
store”. In most cases, you can rent a video for 1 day,
for a couple of days, or just 1 hour.
Select “Reload”, and then press ;.
1 Select the desired video store service and press
E
Zoom
;.
CAUTION
Adjusts the display size of the page you are
browsing.
• If you exercise this operation, Net TV will be completely
initialized. If there is important information for you, take
notes before executing.
2 Select the desired item on the video store page
and press ;.
• The procedure to select and rent a video varies
according to store.
Zoom
[100] 20
400
Video store
You can enjoy watching your favourite movies from
an online rental video store with Net TV.
3 Make the online payment.
: Adjust
END : Exit
• The store will ask you to login or create a new
account if you don’t have one. The login might
consist of your e-mail address and PIN code.
1 Select “Zoom”, and then press ;.
2 Press c/d to adjust the display size.
3 Press > to exit.
NOTE
4 Download the video.
• Video store can only be used with country-exclusive
• During the download, you can continue watching
normal programmes until the TV notifies you that
the download is completed.
special Net TV services.
E
Security info.
Shows information regarding the security of the
page you are browsing.
1 Select “Security info.”, and then press ;.
SD card
5 With your login, select the store where you
rented the video and press ;.
An SD memory card (commercially available) is
required to rent and download a video from the
video store. Be sure to use an SDHC (High capacity)
card with a minimum of 4 GB memory (Class 6 is
recommended).
6 Select the rented video and press ; to play.
NOTE
2 Select “OK” or press > to exit.
Inputting texts
Use the software keyboard (Page 14) when you need
to input text.
• This service is exclusive to some areas.
• When you are creating the account, you can choose the
payment method. Consult each video store website for
more information on the payment terms.
• To enter a number code (PIN), use the numbers on the
remote control.
1 Insert the SD card into the SD CARD (VIDEO
STORE) slot.
Clear Net TV memory
You can clear the Net TV memory, which includes
the lock code, passwords, cookies and browsing
history.
2 The TV automatically starts formatting the SD
card.
• To enter an e-mail address, select the text field on the
page and press ;. Select a character on the keyboard
and press ; to enter it.
• Even if a download has been cancelled, the video can
still be downloaded until the rental period expires.
• Register an SD card using the following procedure when
the screen prompt pops up:
3 Leave the card in the slot when finished
formatting.
NOTE
Go to “TV Menu” > “Setup” > “View setting” >
“Net TV setting” > “Clear Net TV memory”.
• A high-speed internet connection to the TV is also
required to rent and download a video.
• For HD movies, a minimum of 8 GB memory will be
needed.
Go to “TV Menu” > “Setup” > “View setting” > “Net TV
setting” > “SD card registration”.
• The TV could reject the SD card if the write speed is
insufficient for video transfer.
• SD cards are sold separately.
• Some SD cards may not work properly for this function.
67
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying 3D image viewing
You can enjoy 3D-supported images on this TV when you wear 3D glasses (AN-
3DG40), sold separately.
To produce 3D images, liquid crystal shutters in the 3D glasses alternately open
and close imperceptibly fast to exactly match alternating left and right video
images displayed by the TV.
• When children are viewing 3D images, be sure a parent or guardian is present. Monitor
children viewing 3D images, and if they show signs of discomfort, immediately
discontinue use of the 3D glasses.
• People with a known history of photosensitivity and people with heart problems or poor
health should not use the 3D glasses. This can worsen existing health conditions.
• Do not use the 3D glasses for other purposes (such as general eyeglasses, sunglasses,
or protective goggles).
• Do not use the 3D function or 3D glasses while walking or moving around. This may
result in injuries due to running into objects, tripping, and/or falling.
• When using the 3D glasses, take care not to accidentally strike the TV screen or other
people. Viewing 3D images may cause you to misjudge the distance to the TV screen
and accidentally strike the screen, resulting in possible injury.
NOTE
• Refer to the operation manual of the 3D glasses for details regarding usage.
• Some menu items are greyed out in 3D mode. This is not a malfunction.
Before using the 3D glasses
• Not all consumers can experience and enjoy 3D TV. Some people suffer from stereo
blindness which prevents them from perceiving the intended depth of 3D entertainment.
Also, some people who watch 3D programming may experience initial feelings of
motion sickness as they adjust to the picture. Others may experience headaches, eye
fatigue or motion sickness. Some viewers might also experience epileptic seizures. Like
a roller coaster, the experience is not for everyone.
• The 3D glasses are precision equipment. Handle them with care.
• Improper use of the 3D glasses or failure to follow these instructions can result in eye
strain.
• It is recommended that you do not view 3D images if you are sleep deprived or if you
have been drinking alcohol.
indicates compatibility between TV products and 3D Glasses which
are compliant with the “Full HD 3D Glasses™” format, and does not indicate
picture quality of TV products.
• If you experience dizziness, nausea, or other discomfort while viewing 3D images,
immediately discontinue use of the 3D glasses. Using the 3D TV with incompatible 3D
broadcasts or software can make images appear blurry or create overlapping images.
• When viewing 3D images continuously, be sure to take a break periodically to prevent
eye strain.
• If you are nearsighted or farsighted or have astigmatism or a different level of eyesight
between the left and right eyes, you should take the necessary steps, such as wearing
eyeglasses, to correct your eyesight before viewing 3D images. The 3D glasses can be
worn over eyeglasses.
• When viewing 3D images, keep the 3D glasses horizontally level with the TV screen. If
you tilt the 3D glasses with respect to the TV screen, the images viewed by the left and
right eyes may appear significantly different or images may appear overlapping.
• View 3D images at the appropriate distance from the TV screen. The recommended
distance is three times the effective height of the TV screen.
• Be careful of your surroundings when viewing 3D images. When you view 3D images,
objects may appear closer or farther than they are. This may cause you to misjudge the
distance and possibly result in injury if you accidentally hit the screen or surrounding
objects.
• The 3D glasses are not recommended for people aged less than 6.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying 3D image viewing
Preparing for the 3D glasses
Supplied accessories
1
Power button
Part Names
• When the power button is pressed for 2 or more
seconds with the power off, pairing with the TV
starts.
n o
• When the power button is pressed for 2 or more
seconds with the power on, the power turns off.
• When paired, the power will turn off if the power
button is pressed for 2 or more seconds.
• When the power button is pressed for less than 2
seconds with the power off, the 3D glasses will turn
to standby.
Make sure the following accessories are provided
with the 3D glasses.
Nose pad*
3D glasses x 1
(small x 1, large x 1)
• When the 3D glasses are in 3D mode with the
power on, pressing the power button for less than 2
seconds will turn the 3D glasses to 2D mode.
• When the 3D glasses are in 2D mode with the power
on, pressing the power button for less than two
seconds will turn the 3D glasses to 3D mode.
• When paired, the 3D glasses will be non-reactive if
the power button is pressed for less than 2 seconds.
Glasses case x 1
Cleaning cloth x 1
2 LED light
• When paired with the TV, the LED light blinks in red
and green.
• When pairing is completed successfully, the LED
blinks in green for 3 seconds.
• When the power is turned on, the LED lights up in
green for 3 seconds.
• When in 3D mode, the LED blinks in green in
3-second intervals.
• When in 2D mode, the LED blinks in red in 3-second
intervals.
Operation manual
p
Power button
LED indicator
Nose pad
n
o
p
* Use the 3D glasses nose pad as needed. The small
nose pad is already attached.
NOTE
• The illustrations above are for explanation purposes and
may vary slightly from the actual accessories.
• When the power is turned off, the LED blinks in
green 3 times.
NOTE
• The power turns off automatically in the following cases:
− When pairing fails
− When the 3D glasses are not operated in standby for
15 seconds
NOTE
• When in low voltage mode:
− When in 3D mode, the LED blinks in green in
3-second intervals.
− When in 2D mode, the LED blinks in red in
3-second intervals.
3 Nose pad mount
• The dedicated nose pad can be mounted here.
69
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying 3D image viewing
Using the 3D glasses
Using the 3D glasses
Switching to 3D and 2D Mode
When viewing 3D images, you can press the power
button to switch between 2D and 3D modes. This is
useful when several people are viewing 3D images
on the same TV with some people wanting to watch
in 3D and some people wanting to watch in 2D.
Before using the 3D Glasses
Before using the 3D glasses for the first time,
remove the insulating sheet attached to them.
E
Viewing 2D images
When you press and hold for less than 2
seconds while viewing 3D images, the LED light
blinks in red and the 3D images switch to 2D
images.
E
Viewing 3D images
Pairing the 3D glasses
When you press and hold for less than 2
seconds while viewing 2D images, the LED light
blinks in green and the 2D images switch to 3D
images.
To view 3D images, it is necessary to pair the 3D
glasses and TV.
Attaching the Nose Pad
Attach either of the supplied nose pads as needed
(such as when the glasses do not fit properly). The
glasses come with a large and small nose pad.
• To confirm pairing of the 3D glasses and TV, make sure
that 3D images are displayed on the TV screen.
• When the power button is pressed for 2 or more
seconds with the power off, pairing with the TV starts.
When pairing is completed successfully, the LED blinks
in green for 3 seconds.
Usage Range of the 3D Glasses
The 3D glasses can be used by receiving a signal
sent from the TV.
The 3D glasses turn off automatically after 15
seconds if no signal is received from the TV.
• To switch between 2D and 3D modes, briefly press the
power button.
E
Operating range
From directly the TV: approx. 5 m (within approx. 30°
horizontally and 20° vertically)
50 cm–2 m
Removing the nose pad
Attaching the nose pad
NOTE
• When paired, make sure that the 3D glasses are kept
at a distance of 50 cm–2 m from the TV. If too close,
pairing cannot be performed.
70
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying 3D image viewing
Replacing the Battery
The battery has an expected service life of
approximately 75 hours.
• When replacing the button battery, use only the
designated battery (Maxell branded CR2025 lithium
button battery).
3 Replace the battery.
1 Use the tip of a ballpoint pen or similar object
to remove the battery.
2 Insert a new battery.
• Insert the battery with the negative side (-)
facing up.
1 Use the tip of a ballpoint pen or similar object to
press in on the lock.
4 Align the battery holder with the battery slot on
the 3D glasses and slide it back into place.
• Press it in until it locks.
2 While pressing in on the lock, place your
fingertip in the groove and pull out the battery
holder.
• Pull the battery holder all the way out.
NOTE
• Take care not to reverse the battery poles (+) and (-)
when loading the battery.
• Used batteries should be disposed of strictly in
accordance with the applicable local laws and
regulations.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying 3D image viewing
Cautions for 3D image viewing
3D glasses lenses
• Do not apply pressure to the lenses of the 3D glasses. Also, do not drop or bend the 3D glasses.
• Do not scratch the surface of the lenses of the 3D glasses with a pointed instrument or other object. Doing so may
damage the 3D glasses and reduce the quality of the 3D image.
• Use only the cloth provided with the 3D glasses to clean the lenses.
Caution during viewing
• Do not use devices that emit strong electromagnetic waves (such as cellular phones or wireless transceivers) near
the 3D glasses. Doing so may cause the 3D glasses to malfunction.
• The 3D glasses cannot operate fully at extreme high or low temperatures. Please use them within the specified
usage temperature range.
• If the 3D glasses are used in a room with fluorescent lighting, the light within the room may appear to flicker. In this
case, either darken or turn off the fluorescent lights when using the 3D glasses.
• Wear the 3D glasses correctly. 3D images will not be correctly visible if the 3D glasses are worn upside down or
back-to-front.
• Other displays (such as computer screens, digital clocks, and calculators) may appear dark and difficult to view
while wearing the 3D glasses. Do not wear the 3D glasses when watching anything other than 3D images.
• If you lie on your side while watching the TV with 3D glasses, the picture may look dark or may not be visible.
• Be sure to stay within the viewing angle and optimum TV viewing distance when watching 3D images. Otherwise,
you may not be able to enjoy the full 3D effect.
• The 3D glasses may not work properly if there is any other 3D product or electronic devices turned on near the
glasses or TV. If this occurs, turn off the other 3D product or electronic devices or keep the devices as far away as
possible from the 3D glasses.
• Stop using this product in any of the following situations:
– When images consistently appear doubled while you are wearing the 3D glasses
– When you have difficultly perceiving the 3D effect
• If the 3D glasses are faulty or damaged, stop using them immediately. Continued use of the 3D glasses may cause
eye fatigue, headaches and illness.
• If you have any abnormal skin reaction, stop using the 3D glasses. In very rare instances, such reactions may be due
to an allergic reaction to the coating or materials used.
• If your nose or temples become red or you experience any pain or itchiness, stop using the 3D glasses. Pressure
caused by long periods of use may lead to such reactions and may result in skin irritation.
• You may not be able to use several menu items while you are watching the TV in 3D mode.
• You cannot use the 3D function in radio or data mode.
NOTE
• These 3D glasses are only for use with SHARP LCD TVs supporting 3D.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying 3D image viewing
Display format for 3D and 2D images
Image for input
Selectable mode
Description
signals
• Converts normal 2D images into 3D images.
2D s 3D
• Creates 3D images from 3D images displayed
side by side. The image is split into a left and right
image, and then the images are stretched and
displayed sequentially to create a 3D image.
3D mode
(using the 3D
glasses)
Side by Side
• Creates 3D images from 3D images displayed
on the top and bottom. The image is split into a
top and bottom image, and then the images are
stretched and displayed sequentially to create a
3D image.
Top and Bottom
Side by Side s 2D
Top and Bottom s 2D
• Creates 2D images from 3D images displayed
side by side. Only the left image is stretched and
displayed. The image does not appear in 3D.
2D mode
(without
using the 3D
glasses)
• Creates 2D images from 3D images displayed
on the top and bottom. Only the top image is
stretched and displayed. The image does not
appear in 3D.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying 3D image viewing
Viewing 3D images
2 Turn on the power of the 3D glasses, and then
2 Press c/d to select “3D” or “2D”, and then
wear the 3D glasses.
press ;.
NOTE
E
To view in 3D mode
1 Press c/d to select the 3D signal type (“2D
s 3D”,“Side by Side” or “Top and Bottom”),
and then press ;.
• If you do not want to switch to 3D mode automatically,
set “3D auto change” to “No”.
• When the TV is receiving a 3D image signal that can be
detected automatically, the 3D mode icon is displayed
in the channel display.
Switching 3D to 2D mode
When you press 3D while you are watching the TV in
3D mode, the TV switches to 2D mode.
NOTE
• Refer to the operation manual of the 3D glasses for
details regarding usage.
Side by Side
Top and Bottom
1 Press 3D during the 3D mode.
• The TV screen may temporarily become black when
the TV is trying to detect a 3D image signal and when
switching from 3D to 2D mode.
2 Select “Yes”, and then press ; to switch to 2D
• If you select the same system as that of the input
signal, 3D images are displayed.
mode.
• You can select only “2D s 3D” in ATV mode.
2 Turn on the power of the 3D glasses, and
then wear the 3D glasses.
3 Take off the 3D glasses and turn off the power of
Receiving a 3D image signal that
can be detected automatically
The image signal may contain a 3D identification
signal. You can enable the TV to automatically
detect the 3D image type (Page 73).
the 3D glasses.
NOTE
E
• If the input signal switches to 2D, 2D images are
displayed automatically.
To view in 2D mode
• Switching from 3D to 2D mode.
• 3D mode is canceled automatically when the setting
is changed, input source is changed, the input signal
resolution is changed or the power is turned off.
Press c/d to select the 2D signal type (“Side
by Side” or “Top and Bottom”), and then press
;.
1 Go to “TV Menu” > “Setup” > “Option” > “3D
setup” > “3D auto change”.
Receiving a 3D image signal that
cannot be detected automatically
E
When “3D auto change” is set to “Yes”
• The 3D display format is detected automatically and
the appropriate 3D image is displayed.
When the TV receives a 3D image signal that cannot
be detected automatically, you can select between
3D and 2D image viewing.
Top and Bottom
Side by Side
1 Press 3D.
• If you select the same system as that of the input
signal, 2D images are displayed.
• A screen appears prompting you to select between
3D and 2D image viewing.
E
When “3D auto change” is set to “No”
1 The confirmation message is displayed.
Press 3D.
2 Press c/d to select “Yes”, and then press
;.
74
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying 3D image viewing
Watching 2D images in 3D
You can convert normal 2D images into 3D images.
1 Press 3D.
3D Menu
Configuring the TV settings to
enhance 3D image viewing
Pressing 3D in 3D mode displays the 3D menu.
Press the coloured buttons to make the necessary
settings.
You can make various settings to enhance 3D image
viewing.
2 Press c/d to select “2D s 3D”, and then press
;.
3 Turn on the power of the 3D glasses, and then
wear the 3D glasses.
NOTE
• The confirmation message to select either 3D or 2D
mode is displayed on the screen once per hour.
• When the TV converts normal 2D images into 3D
images, you can display the “2D s 3D convert effect”
menu to adjust the convert effect by pressing Y.
Switching to the previous mode
You can switch back to the previous mode by
pressing 3D.
Buttons
R button
Description
3D brightness boost (Page 76).
Surround (Page 39).
• The surround mode changes each
time you press G.
3D picture adjustments
1 Press 3D.
G button
• A confirmation message is displayed.
E
Basic operation
2 Select “Yes”, and then press ;.
2D s 3D convert effect (Page 76).
• “2D s 3D convert effect” is available
only when selecting “2D s 3D”
(refer to Watching 2D images in 3D
shown to the left).
• The TV returns to the previous mode.
Go to “TV Menu” > “Setup” > “Picture” > select/
adjust the item you want to set.
Y button
B button
NOTE
• Which items can be selected/adjusted differs depending
on whether the TV is in 2D mode or in 3D mode.
3D setup (Page 76).
AV mode
The audio and video settings can be changed to suit
the programme or input content being watched.
Item
For a highly defined image in a
normal lighting.
STANDARD (3D)
MOVIE (3D)
GAME (3D)
For a movie.
Lowers image brightness for easier
viewing.
NOTE
• You can select “AV mode” by pressing # on
the remote control unit.
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying 3D image viewing
3D brightness boost
NOTE
3D depth control
• This function is only available when converting 2D
images to 3D images.
You can adjust the backlight of the TV for 3D image
viewing.
Select the method for adjusting the 3D image effect
(depth).
• When you use this function, image conversion on the TV
will result in some differences in the original images and
how they appear.
• 2D images that have been converted to 3D images may
be viewed only for personal use.
Item
Item
High
The screen brightens
Adjusts the still image effect (depth)
automatically.
Auto
Middle
Low
For manual adjustment of the still
image effect (depth).
Viewing time info
Manual
The screen dims
This function allows you to display the elapsed time
of 3D image viewing on the screen.
NOTE
NOTE
• If you select “Manual”, adjust the 3D still image effect
(depth) with “Depth change”.
• When “High” or “Low” is selected, “OPC”, “Backlight”
and “Range of OPC” are not available.
Item
• This function can be adjusted when viewing 3D still
images in USB media mode.
• Even if you select “Auto”, the 3D still image effect
(depth) may not be correctly adjusted depending on the
3D still image.
The elapsed time is displayed in
one-hour increments after you start
watching 3D images.
• The “3D brightness boost” is not available for 2D mode.
• The “3D brightness boost” items can be saved for every
3D “AV mode” item (“STANDARD (3D)”, “MOVIE (3D)”,
“GAME (3D)”).
Yes
No
Hide the time.
• 3D still images taken in macro mode will be displayed
with excessive depth.
3D setup
3D test
• If you experience discomfort while viewing 3D images,
immediately discontinue viewing.
E
Basic operation
Go to “TV Menu” > “Setup” > “Option” > “3D
setup” > select the menu you want to set.
This function displays 3D images for testing the 3D
operation. Clicking “Start” on the screen plays back
3D test images.
Depth change
NOTE
You can adjust the 3D still image effect (depth).
Adjust the level from _10 to e10. “0” is the level
where no adjustment is made (factory preset value).
3D auto change
• If you press > during playback, the previous screen
will be displayed.
This function allows the TV to switch to 3D mode
automatically when a 3D identification signal is
detected.
3D glasses control
NOTE
• This function can be adjusted when viewing 3D still
images in USB media mode.
To enable this function, set the location of the TV to
“STORE” (Page 15).
Item
• If you experience discomfort while viewing 3D images,
immediately discontinue viewing.
When a 3D signal is detected, the TV
switches to 3D mode automatically.
When a 3D signal is detected, the TV
performs the 3D image detection in
addition to “Mode 1”.
Automatic change is not performed.
Mode1
Item
Switch on signals to the 3D glasses.
When watching 3D images, switch this
setting to “On”.
2D s 3D convert effect
On
Off
Mode2
You can adjust the 3D effect when converting
images from 2D mode to 3D mode. Select a desired
level of convert effect from e1 to e16.
Switch off signals to the 3D glasses.
This will stop the TV from influencing
3D glasses that may be in that area of
the store.
Off
NOTE
• 3D signals may not be detected depending on the signal
format.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying 3D image viewing
Specifications — 3D glasses (sold separately)
Troubleshooting — 3D Images
Problem
Possible solution
Product
3D Glasses
• 3D images are not
displayed.
• Is “3D auto change” set to “Off”? Press 3D to switch to
3D mode (Page 76).
Model number
Lens type
AN-3DG40
Liquid crystal shutter
DC3V
• If “3D auto change” is set to “Mode1” or “Mode2” but
no 3D images are displayed, check the display format of
the content being viewed. Some 3D image signals may
not be recognized as 3D images automatically. Press
3D to select the appropriate display format for the 3D
image (Page 76).
• Is the power of the 3D glasses turned on? Press the
power button for at least 2 seconds to turn on the 3D
glasses.
Power supply
Battery
Lithium button battery (CR2025 x 1)
Approx. 100 hours of continuous use
171.2 × 46.0 × 162.4 mm
Battery life
Dimension (W x H x D)
Weight
Approx. 31.0 g (including the lithium ion polymer
rechargeable battery)
Operating temperature
10°C to 40°C (The 3D glasses cannot operate fully at extreme
high or low temperatures. Please use them within the
specified usage temperature range.)
• Are the 3D glasses set to 2D mode? Press the power
button for an amount of time that is less than 2 seconds
to switch the 3D glasses to 3D mode.
• Is there an obstacle between the 3D glasses and the
TV, or is something covering the receiver on the 3D
glasses? The 3D glasses operate by receiving a signal
from the TV. Do not place anything between the 3D
emitter on the TV and the receiver on the 3D glasses.
The product serial number is displayed on the 3D glasses as indicated in the illustration on
the left. The first three digits represent the date of manufacture.
Example: Manufactured on February 23, 2013
S/N : 8 2 P
Manufacture number
• Images displayed in 3D
mode appear doubled
while you are wearing the
3D glasses.
• Is the power of the 3D glasses turned on? Press the
power button for at least 2 seconds to turn on the 3D
glasses.
Month of
Day of
manufacture
manufacture
1: 1
2: 2
3: 3
1: 1 A : 10
2: 2
3: 3
B : 11
H : 17
J : 18
8:8
9:9
• Images displayed in 3D
mode appear 2D while
you are wearing the 3D
glasses.
• Are the 3D glasses set to 2D mode? Press the power
button while viewing 2D images, the LED light blinks in
green and the 2D images switch to 3D images.
N : 22
P : 23
A:10
B:11
C:12
W: 30
X : 31
* “I”, “O”, “Y” and “Z” are not used.
NOTE
• Please contact your local authority for the correct method of disposal of this product
and/or packing.
• For further details, refer to the operation manual of the 3D glasses.
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Troubleshooting
• No sound.
• Is the volume too low?
Problem
• No power.
Possible solution
• Turn on (;) the MAIN POWER switch on the rear of the TV
(Page 19).
• Is the AC cord disconnected?
• Check if you pressed a on the TV.
• External influences such as lightning, static electricity, etc.,
may cause improper operation. In this case, operate the TV
after first turning off the power, or unplugging the AC cord
and re-plugging it in after one or two minutes.
•
If you do not clearly hear the sound for the visually impaired,
go to “TV Menu” > “Setup” > “Audio” > “Audio description
setting” > “Mix level”, and select the upper level to turn up
the volume.
• Make sure that headphones are not connected.
• Check if you pressed e on the remote control unit.
• Is the proper item selected in the “Audio select” menu
when connecting devices to the HDMI 2 terminal or the PC
terminal? (Pages 28, 30 and 47)
• The TV cannot be
operated.
• Remote control unit
does not operate.
• Are batteries inserted with polarity (e, f) aligned?
• Are batteries worn out? (Replace with new batteries.)
• Are you using it under strong or fluorescent lighting?
• Is a fluorescent light illuminating to the remote control
sensor?
• Is the image position correct?
• Are screen mode adjustments (Wide mode) such as picture
size made correctly? (Pages 46, 58 and 59)
• Refer to “Picture / Audio test” (Page 80).
• The TV sometimes
makes a cracking
sound.
• This is not a malfunction. This happens when the cabinet
slightly expands and contracts according to changes in
temperature. This does not affect the TV’s performance.
• Teletext is not
displayed.
• Subtitles for teletext
are not displayed.
• Net TV start page
cannot be displayed.
• Some Internet
functions used on a
PC are not available
from the TV.
• (858 series only) In some cases, teletext and subtitles
for teletext cannot be displayed when MHP is active. To
deactivate MHP, go to “TV Menu” > “View setting” > “Data
service setting” and select “Off” (Page 26).
• Is the ETHERNET cable connected correctly? (Page 64)
• Check the settings of “Network setup” (Pages 64–65).
• Picture is cut off.
• Strange colour,
light colour, or dark
colour, or colour
misalignment.
• Adjust the picture tone.
• Is the room too bright? The picture may look dark in a room
that is too bright.
• The TV has only limited functions compared with regular PC
browsers (Page 66).
• Check the “Colour system” setting (Pages 43 and 48).
• Power is suddenly
turned off.
• The TV’s internal temperature has increased. Remove any
objects blocking the vent or clean.
• Is the “Sleep timer” set? Select “Off” from the “Sleep timer”
menu (Page 40).
• Is “No signal off” or “No operation off” activated? (Page 40)
• No picture.
• Are connections to external equipment correct?
(Pages 27_32)
• Is the input signal type selected correctly after connection?
(Page 47)
• Is the correct input source selected? (Page 19)
• Is a non-compatible signal being input? (Page 61)
• Is the picture adjustment correct? (Pages 36_38)
• Is the antenna connected properly? (Page 10)
• Refer to “Picture / Audio test” (Page 80).
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Reset the PIN
1 Go to “TV Menu” > “Setup”.
2 Press a/b to select “Auto installation”, “Programme setup”, “PIN”,
“Parental rating” or “Reset”, and then press ;. The PIN input window will
display.
3 Press and hold both :r and i+ on the TV simultaneously until the
message appears on the screen.
NOTE
• When the PIN code is reset, the default PIN code (“1234”) is set.
• The PIN is also available for the Net TV function.
Reset
If complex adjustments are made so that the settings cannot be restored to
normal, you can reset the settings to the factory preset values.
1 Go to “TV Menu” > “Setup” > “View setting” > “Reset”.
2 Press c/d to select “Yes”, and then press ;.
• “Now, TV will restart automatically, OK?” displays on the screen.
3 Press c/d to select “Yes”, and then press ;.
• “Now initialising...” displays on the screen and blinks.
• After the reset has completed, the power shuts off and then comes back on. The
screen will have returned to its original settings.
NOTE
• PIN input is required when executing “Reset”. The default PIN is “1234”. To change the
PIN setting, refer to Individual setting — PIN (Page 44). To reset the PIN setting (PIN
input will no longer be needed), refer to Reset the PIN shown above.
• “Reset” is greyed out in 3D mode. To select the “Reset” menu, you need to switch to 2D
mode.
79
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Updating your TV via DVB-T/T2/
C/S*/S2*
Downloading the software
Getting update information
You can select the method of update.
Information
1 If the software is updated, the confirmation
message “New download information has been
detected.” appears.*
Ensure that your TV software version is always up to
date. From time to time SHARP will make updated
TV base software and DVB software available.
* 857 series only
Picture / Audio test
When external equipment is connected with the
TV powered on and there is no audio/video output,
the TV may determine which equipment could
cause a problem between the TV and the external
equipment.
• If the TV receives the update service while in
standby mode, a confirmation message displays
after turning on the power.
View setting
When the download is available only at a later time,
*
Download setup
a confirmation message regarding the scheduled
date and time to start downloading from a TV
station will be displayed. Download information
may be displayed together with the confirmation
message.
NOTE
Go to “TV Menu” > “Setup” > “View setting” >
“Individual setting” > “Standby search” >
“Download setup”.
• Terminals which can be tested:
HDMI, component, composite, SCART, DVI, D-sub
• External speakers cannot be tested. This function is
available for the TV speakers only.
2 Follow the screen prompts.
Searching for updates*
Item
Item
* All countries except UK, Sweden, Finland and Italy are
set to “No” for this function.
The TV automatically determines whether a new
software version is available when the TV is in
standby mode.
Perform a test for picture display.
Starts downloading immediately.*
It takes approximately one hour to
update. You cannot carry out other
When external equipment is connected
but the picture is not displayed, the
Picture test
test will be performed.
Perform a test for audio playback.
operations while downloading.
• Cancels the download by pressing
Yes
; on the remote control unit when
“Discontinue” is displayed on the
screen during the update.
When external equipment is connected
but the audio does not playback, the
Item
Audio test
Automatically searches for new
software updates available when the
TV is in standby mode.
test will be performed.
Yes
No
Does not perform downloading.
Information
* The download will start at the date and time for the
scheduled download. Turn on the power of the TV
before the scheduled time for downloading or keep it in
standby mode.
Does not search for update
information.
No
Message list
Checks if there is new software
immediately.
When new software is detected, you can confirm the
update information and download the software from
“Message list”.
Now
NOTE
• Do not turn off the MAIN POWER switch or unplug the
AC cord while receiving the data, otherwise it will not be
captured properly.
Go to “TV Menu” > “Setup” > “Information” >
“Message list”.
• Updating the software may take some time.
NOTE
• When the TV succeeds at downloading new software,
the message is updated in the “Message list” of the
“Information” menu.
• The software update will not be carried out if there is no
new software available at the specified download time.
80
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
CAUTION
Information
Updating your TV via USB/network
• If the data is not compatible with the system, an error
message appears on the screen. Repeat steps 2 and 3
after pressing ;.
Receiver report
Information
Display reports regarding failures and changes for
timer settings.
• When an error message displays, check to see if:
• The USB device is inserted firmly.
• The USB memory has two or more software update
files.
Software update
Go to “TV Menu” > “Setup” > “Information” >
“Receiver report”.
This function allows you to update to the latest
software via a USB device or network.
• To check the availability of the latest software versions,
to the download pages for the appropriate countries.
• No data for updating the system exists in the USB
memory.
• The software update file is broken.
• The software update file is not compatible with your
TV’s software.
• The current system is same as the system update
data.
• The USB memory is not formatted by FAT32.
Information
Identification
1 Go to “TV Menu” > “Setup” > “Information” >
“Software update” > “USB update”.
• You can also update the software through the
network. Go to “TV Menu” > “Setup” >
You can check the TV ID on the screen for reporting
to customer service.
Go to “TV Menu” > “Setup” > “Information” >
“Identification”.
“Information” > “Software update” > “Network
update” and follow the on-screen instruction.
• A broadband connection and Network setup are
required to update the software using the internet
(Pages 64–65).
5 The TV displays the software version information
after checking the data.
Information on the software licence
for this product
6 Press c/d to select “Yes” to update the
system, and then press ;.
7 The TV restarts automatically, and the software
update will be complete.
2 Press ; and then insert the USB device
Information
containing the software update file.
Software licence
• This operation may take a while.
CAUTION
You can read the software licences in this menu.
• The Net TV memory, which includes the lock code,
passwords, and cookies, may be cleared when the
software update is carried out.
Go to “TV Menu” > “Setup” > “Information” >
“Software licence”.
E
Software composition
The software included in this product is comprised
of various software components whose individual
copyrights are held by SHARP or by third parties.
CAUTION
• Be sure to insert the USB device correctly into the
terminal.
3 Press > to close the window when a screen
prompt pops up.
4 The TV displays a confirmation screen while
checking the data in the inserted USB device.
81
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
• DivX®, DivX Certified®, DivX Plus® HD and associated logos are trademarks of Rovi
Corporation or its subsidiaries and are used under license.
Warning regarding basic use
• ABOUT DIVX VIDEO: DivX® is a digital video format created by DivX, LLC, a
subsidiary of Rovi Corporation. This is an official DivX Certified® device that plays
DivX video. Visit divx.com for more information and software tools to convert your
files into DivX videos.
• ABOUT DIVX VIDEO-ON-DEMAND: This DivX Certified® device must be registered
in order to play purchased DivX Video-on-Demand (VOD) movies. To obtain your
registration code, locate the DivX VOD section in your device setup menu. Go to vod.
divx.com for more information on how to complete your registration.
Cautions regarding use in high and low temperature environments
• When the TV is used in a low temperature space (e.g., room, office), the picture
may leave trails or appear slightly delayed. This is not a malfunction, and the TV will
recover when the temperature returns to normal.
• Do not leave the TV in a hot or cold location. Also, do not leave the TV in a location
exposed to direct sunlight or near a heater, as this may cause the cabinet to deform
and the LCD panel to malfunction.
Storage temperature: f 20 °C to e 60 °C.
• YouTube and the YouTube logo are trademarks of Google Inc.
Devices connected to the protective earthing of the building installation through the
MAINS connection or through other devices with a connection to protective earthing
and to a television distribution system using coaxial cable, may in some circumstances
create a fire hazard. Connection to a television distribution system therefore has to be
provided through a device providing electrical isolation within a certain frequency range
(galvanic isolator, see EN 60728-11).
• “x.v.Colour” and
are trademarks of Sony Corporation.
• The Wi-Fi CERTIFIED Logo is a certification mark of the Wi-Fi Alliance.
• The Wi-Fi Protected Setup Mark is a mark of the Wi-Fi Alliance.
• DLNA®, the DLNA Logo and DLNA CERTIFIED™ are trademarks, service marks, or
certification marks of the Digital Living Network Alliance.
NOTE
• For requirements in Norway and Sweden, the requirements for isolation are also
relevant for devices that can be connected to television distribution systems.
• All other company or product names are trademarks or registered trademarks of their
respective companies.
Trademarks
• MHL, the MHL Logo, and Mobile High-Definition Link are trademark or registered
trademarks of MHL LLC in the United States and other countries.
• The terms HDMI and HDMI High-Definition Multimedia Interface, and the HDMI Logo
are trademarks or registered trademarks of HDMI Licensing LLC in the United States
and other countries.
• Manufactured under license under U.S. Patent Nos: 5,956,674; 5,974,380; 6,487,535
& other U.S. and worldwide patents issued & pending. DTS, the Symbol, & DTS and
the Symbol together are registered trademarks & DTS 2.0+Digital Out is a trademark
of DTS, Inc. Product includes software. © DTS, Inc. All Rights Reserved.
• Manufactured under license from Dolby Laboratories.
• “Dolby” and the double-D symbol are trademarks of Dolby Laboratories.
• Full HD 3D Glasses™ logo and “Full HD 3D Glasses™” word are trademark of Full
HD 3D Glasses Initiative
• The “HD TV 1080p” Logo is a trademark of DIGITALEUROPE.
• The DVB logo is the registered trademark of the Digital Video Broadcasting—DVB—
project.
• LC_ LCFONT+ and LC logo mark are registered trademarks of
SHARP Corporation. This product is embedded with LC Font technology, which was
developed by SHARP Corporation for clearly displaying easy-to-read characters on
an LCD screen. However, other non-LCD fonts are used for displaying some screen
pages.
82
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Software licences for Net TV
Disclaimers for services using the Internet
This product includes the Opera™
browser.
DISCLAIMERS
•
• This product contains fonts provided by Monotype Imaging Inc.
• Monotype® is a trademark of Monotype Imaging Inc. registered in the United States
Patent and Trademark Office and may be registered in certain jurisdictions.
• Tioga™ is a trademark of Monotype Imaging Inc. and may be registered in certain
jurisdictions.
• Letter Gothic™ is a trademark of The Monotype Corp. and may be registered in
certain jurisdictions.
• iType® is a trademark of Monotype Imaging Inc. registered in the United States
Patent and Trademark Office and may be registered in certain jurisdictions.
• This product contains the iType® font engine from Monotype Imaging Inc.
•
•
•
•
•
83
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Specifications
HDMI 1 (EXT 4)
HDMI 2 (EXT 5)
HDMI 3 (EXT 6)
HDMI 4 (EXT 7)
USB 1
USB 2 (HDD)
USB 3 (WIRELESS LAN) USB (DC 5 V, 500 mA)
ETHERNET (10/100)
HDMI 2/PC AUDIO (L/R) Ø 3.5 mm jack*2
HDMI (ARC)
HDMI
HDMI
HDMI (MHL)
USB (DC 5 V, 500 mA)
USB (DC 5 V, 1000 mA)
Item
Model:
Model:
LC-60LE855E/LC-60LE855K/
LC-60LE858E/LC-70LE858E/
LC-80LE858E
LC-60LE857E/LC-60LE857RU/
LC-70LE857E/LC-70LE857RU/
LC-70LE857K/LC-80LE857E/
LC-80LE857RU/LC-80LE857K
LCD panel
203 cm (80o) X-Gen panel
177 cm (70o) X-Gen panel
152 cm (60o) X-Gen panel
1,920 x 1,080 x 4 dots
PAL/SECAM/NTSC 3.58/NTSC 4.43/PAL 60
CCIR (B/G, I, D/K, L/L’)
DVB-T (2K/8K OFDM),
DVB-T2 (1K/2K/4K/8K/ DVB-S/S2
16K/32K OFDM), DVB-C DVB-T2 (1K/2K/4K/8K/
16K/32K OFDM), DVB-C
Network connector
Resolution
Video colour system
TV
DIGITAL AUDIO OUTPUT Optical S/PDIF digital audio output
C. I. (Common Interface) EN50221, R206001, CI Plus specification
OUTPUT/Headphones
TV-
Analogue
Digital
function standard
DVB-T (2K/8K OFDM),
RCA pin (AUDIO L/R)/Ø 3.5 mm jack (audio
output)
SD card
SD CARD (VIDEO
STORE)
OSD language
Receiving
channel
VHF/UHF
CATV
Satellite
(857 series
only)
IR A ch_E69 ch (Digital), E2_E69 ch, F2_F10 ch,
I21_I69 ch, IR A_IR J ch
Hyper-band, S1_S41 ch
Arabic, Chinese, Czech, Danish, Dutch, English,
Estonian, Finnish, French, German, Greek,
Hungarian, Italian, Latvian, Lithuanian, Norwegian,
Polish, Portuguese, Romanian, Russian, Slovak,
Slovene, Spanish, Swedish, Turkish, Ukrainian
—
950_2150 MHz*1
Power requirement
Power consumption
AC 220_240 V, 50 Hz
TV-tuning system
Auto Preset 999 ch
(non-Nordic [DTV])
Auto Preset 9999 ch
(Nordic [DTV])
Auto Preset 99 ch (ATV), Auto Preset 99 ch (ATV),
Auto Label
Auto Sort
Auto Preset 999 ch
(non-Nordic [DTV])
Auto Preset 9999 ch
(Nordic [DTV])
80o : 290W (0.2W Standby*3)
70o : 235W (0.2W Standby*3)
60o : 180W (0.2W Standby*3)
Weight
80o : 62.0 kg (without stand)
67.5 kg (with stand)
70o : 43.0 kg (without stand)
49.5 kg (with stand)
Auto Label
Auto Sort
Auto Preset 9999 ch
60o : 33.0 kg (without stand)
40.0 kg (with stand)
0 °C to e 40 °C
Stereo/Bilingual
Audio amplifier
Speaker
A2/NICAM
10 W x 2/15 W x 1
(150 mm x 32 mm) x 2/Ø 80 mm x 1
Operating temperature
Terminals Antenna
VHF/UHF
75 q Din type (analogue & digital)
I The satellite channel’s frequency may vary according to satellites and antennas.
J The HDMI 2 and PC terminals can both use the same audio input terminal.
K Standby power consumption applies when the TV is set to not receive EPG data.
• As a part of our policy of continuous improvement, SHARP reserves the right to make
design and specification changes for product improvement without prior notice. The
performance specification figures indicated are nominal values of production units.
There may be some deviations from these values in individual units.
Satellite
(857 series
only)
—
75 q F type (DVB-S/S2)
RS-232C
EXT 1
EXT 2
EXT 3
PC
D-sub 9 pin male connector
SCART (AV input, Y/C input, RGB input, TV output)
RCA pin (AV input/AUDIO L/R)
Component (AV input/Audio L/R)
mini D-sub 15 pin
84
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Specifications (Wireless LAN USB adapter)
Product name
Standard
Host interface
Frequency band
Dual Band 802.11n USB2.0 adapter
IEEE 802.11a/b/g/n
USB2.0
2412_2484 MHz
5150_5850 MHz
Static WEP (64/128 bit, key index 1 only)
WPA-PSK (TKIP)
WPA2-PSK (AES)
DBPSK@1 Mbps
DQPSK@2 Mbps
CCK@5.5/11 Mbps
BPSK@6/9 Mbps
QPSK@12/18 Mbps
16-QAM@24 Mbps
64-QAM@48/54 Mbps and above, Rx up to 300
Mbps
11b 17 e/_ 1.5 dBm
11g 14 e/_ 1.5 dBm
11n 13 e/_ 1.5 dBm
NOTE
• This TV has received the following certifications when connected in an environment
using the supplied SHARP wireless LAN adapter.
− Wi-Fi CERTIFIED™ (certification programme from the Wi-Fi Alliance®)
− Wi-Fi Protected Setup™ (certification programme from the Wi-Fi Alliance®)
• When there is significant interference in the 2.4_GHz frequency (such as from other
wireless LAN devices, Bluetooth® devices, 2.4_GHz cordless telephones, and
microwave ovens), it is recommended that you use a wireless LAN access point that
supports IEEE802.11a/n (5 GHz) and set the access point to transmit at 5 GHz. For
setup details, see the operation manual of your access point.
• Before transferring to a third party or disposal, be sure to initialize the wireless LAN
settings.
• Wireless LAN USB adapter (WN8522D 7-JU) is Peripheral Device for TV and supports
WEP64, WEP128, TKIP and AES encryptions.
• Using a wireless LAN adapter other than the supplied SHARP wireless LAN adapter
may result in radio communications that do not comply with regulations on radio
communications. Therefore, do not use a wireless LAN adapter other than the supplied
SHARP wireless LAN adapter.
Security
Modulation
Transmit
Tx
2.4 GHz
power and output
sensitivity power:
(Typical)
5 GHz
(5150_5250 MHz,
5250_5350 MHz)
11a 14 e/_ 1.5 dBm
11n 13 e/_ 1.5 dBm
5 GHz
(5470_5725 MHz,
5725_5850 MHz)
11a 13 e/_ 1.5 dBm
11n 13 e/_ 1.5 dBm
Rx sensitivity: (Typical)
_84 dBm@11 Mbps
_72 dBm@54 Mbps
_64 dBm@64-QAM, 20 MHz channel spacing
_61 dBm@64-QAM, 40 MHz channel spacing
Current Consumption (DC 5V)
Tx: 2.2 W (Typical)
Rx: 1.4 W (Typical)
Weight
13 g
Dimensions
20.0 (W) g 73.3 (D) g 8.0 (H) mm
Operating temperature
0 °C to e 40 °C
85
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Environmental specifications
Mounting the TV on a wall
Item
60o/70o/80o
LC-70LE857E/LC-70LE857RU/LC-70LE857K/LC-70LE858E/LC-60LE855E/
LC-60LE855K/LC-60LE857E/LC-60LE857RU/LC-60LE858E
On-mode (W) (in home-mode)
108 W/142 W/178 W
I
Energy-Save-Mode (W)
Standby-Mode (W)
Off Mode (W)
Advanced
78 W/98 W/125 W
0.2 W/0.2W/0.2W
0.01 W or less
J
K
L
•
This TV should be mounted on a wall only with a SHARP wall mount bracket (Page 4).
The use of other wall mount brackets may result in an unstable installation and may
cause serious injuries.
MAIN POWER switch
• Mounting the LCD colour TV requires special skills and should only be performed
by qualified service personnel. Customers should not attempt to do the work
themselves. SHARP bears no responsibility for improper mounting or mounting
that results in accident or injury.
• You can ask qualified service personnel about using an optional bracket to mount the
TV to a wall.
158 kWh/207 kWh/
260 kWh
114 kWh/143 kWh/
183 kWh
Annual Energy Consumption (kWh)
Annual Energy Consumption
M
M
Advanced
Energy-Save-Mode (kWh)
• When you mount the TV on a wall, you should attach the supporting post.
I Measured according to IEC 62087 Ed. 2
J For further information about the Energy Save function, please see related pages in
this operation manual
K Measured according to EN 62301 Ed. 1
Standby power consumption applies when the TV is set to not receive EPG data
L Measured according to EN 62301 Ed. 1
M Annual energy consumption is calculated according to EU Regulation (EU)
No 1062/2010 based on operating 4 hours per day for 365 days a year
NOTE
• The power consumption of on-mode varies depending on the images the TV displays.
NOTE
• Detach the cable tie on the rear of the TV when using the optional mount bracket.
• Due to the terminal configuration on this TV, when you wall-mount this model, make
sure there is enough space between the wall and the TV for the cables.
• To use this TV mounted on a wall, remove the AC cord holder and the covers at the 4
locations on the rear of the TV, and then use the screws supplied with the wall mount
bracket to secure the bracket to the rear of the TV.
E
Wall mount audio setup
When you mount the TV on a wall, you can adjust the sound to a more suitable
one by setting this function to “Yes”.
Go to “TV Menu” > “Setup” > “View setting” > “Wall mount audio setup”.
86
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
NOTE
LC-80LE857E/LC-80LE857RU/LC-80LE857K/LC-80LE858E
• Do not mount the TV at an angle.
• Due to the terminal configuration on this TV, when you wall-mount this model, make
sure there is enough space between the wall and the TV for the cables.
• To use this TV mounted on a wall, remove the cable tie as needed.
• Do not use screws that do not comply with the VESA standard screw specifications.
• Do not use screws that are longer than the standard length. Screws that are too long
may cause damage to the inside of the TV set.
The wall mount kit (sold separately) allows you to mount the TV on the wall. For
detailed information on installing the wall mount, see the instructions provided
with the product. We recommend you to contact qualified service peronnel when
installing it. SHARP is not responsible for any damage to the product or injury to
yourself or others if you choose to install the wall mount on your own.
• Do not fasten the screws too firmly or loosely. This may damage the product or cause
the product to fall, leading to personal injury. SHARP is not liable for these kinds of
accidents.
• SHARP is not liable for product damage or personal injury when a non-VESA or non-
specified wall mount is used or the consumer fails to follow the product installation
instructions.
CAUTION
• Install your wall mount on a solid wall perpendicular to the floor. When you want
to attach the wall mount to surfaces other than plaster board, please contact your
nearest retailer/adviser for additional information. If you install the TV on a ceiling
or slanted wall, it may fall and result in severe personal injury. Always have two
people mount the TV on a wall.
Wall mount kit specifications
Do not install the wall mount kit while your TV is turned on. It may
result in personal injury due to electric shock.
Standard dimensions for wall mount kits are shown below.
A
E
Wall mount audio setup
WALL
Max 75
When you mount the TV on a wall, you can adjust the sound to a more suitable
one by setting this function to “Yes”.
B
WALL MOUNT KIT
Max 375
WALL MOUNT KIT
Go to “TV Menu” > “Setup” > “View setting” > “Wall mount audio setup”.
SCREW
WALL MOUNT UNIT
CABINET
12
Min 80
MOUNTING HOLES
600
A
DEPTH OF
MOUNTING HOLES
• VESA screw hole specs (A - B) in millimeters
• Standard screw
• Quantity
600 – 400
M8*2
4
I Must be smaller than the shaded area.
J Use 1.25 pitch screws.
87
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Rating table for child lock
Abbreviation list
Abbreviated term
ARC
ATV
Stands for
Broadcasted rating
AGE
Audio Return Channel
Analogue TV
User-adjusted
rating
4
5
6
7
8
9
10 11 12 13 14 15 16 17 18
CEC
DivX®
:
Consumer Electronics Control
Digital Video Xtreme®
Universal
viewing
—
—
—
—
—
—
—
✔
—
—
✔
—
—
✔
—
—
✔
—
—
✔
—
—
✔
—
—
✔
—
—
✔
—
—
✔
✔
Digital Noise Reduction
Parental
approval pref.
DTV
Digital TV
—
✔
✔
✔
✔
✔
✔
✔
✔
✔
✔
DVB-C
DVB-S
DVB-S2
DVB-T
DVB-T2
DVI
Digital Video Broadcasting-Cable
Digital Video Broadcasting-Satellite
Digital Video Broadcasting-Satellite-Second Generation
Digital Video Broadcasting-Terrestrial
Digital Video Broadcasting-Terrestrial Version 2
Digital Visual Interface
Electronic Programme Guide
Hybrit Broadcast Broadband TV
High-bandwidth Digital Content Protection
High-Definition Multimedia Interface
Local Area Network
X-rated
✔
Broadcasted rating
User-adjusted
rating
Parental approval
pref.
Universal viewing
X-rated
EPG
HbbTV
HDCP
HDMI
LAN
MHEG
MHL
Universal
viewing
—
✔
✔
—
—
✔
—
—
—
Parental
approval pref.
Multimedia and Hypermedia Expert Group
Mobile High-Definition Link
Multimedia Home Platform
On Screen Display
X-rated
MHP
OSD
PCM
SAT
Pulse Code Modulation
Satellite
USB
Universal Serial Bus
WPS
Wi-Fi® Protected Setup
88
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
Dimensional drawings
LC-60LE855E
LC-60LE855K
LC-60LE857E
LC-60LE857RU
LC-60LE858E
LC-70LE857E
LC-70LE857RU
LC-70LE857K
LC-70LE858E
(28)*2
(58)
(28)*2
(58)
(1378)
(1578)
(1329)*1
(1539)*1
(178)
(178)
(640)
(400)
(385)
(385)
(640)
(400)
(575)
(621)
I Active area
J Thinnest part (except of terminal height)
NOTE
• Dimensions do not include protrusions such as screws and some parts.
89
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
LC-80LE857E
LC-80LE857RU
LC-80LE857K
LC-80LE858E
(34)*2
(59)
(1825)
(1771)*1
(207)
(820)
(600)
(443)
(441)
I Active area
J Thinnest part (except of terminal height)
NOTE
• Dimensions do not include protrusions such as screws and some parts.
90
Download from Www.Somanuals.com. All Manuals Search And Download.
Appendix
EU Energy Label for Televisions
On 30 November, 2010 the European Commission adopted the Commission
Delegated Regulation (EU) No 1062/2010 with regard to energy labelling of
televisions.
2
1
3
The Regulation entered into force on 20 December 2010 and applies in all
Member States.
Manufacturers and dealers are required to display the label shown below, on their
televisions from 30 November 2011.
4
The label provides information to assist consumers in evaluating televisions for
energy efficiency and energy consumption and to make a purchasing decision
that contributes to the protection of the environment and to a lower carbon
society.
The figure below shows the label design and explains the information included.
sharp.eu).
7
XYZ
5
6
XYZ
The retailer or online shop where you purchased your television from would have
displayed the label and its corresponding rating. If in doubt please consult them.
8
XYZ
XYZ
In addition to saving energy many Sharp LCD televisions also carry the EU
Ecolabel, a voluntary environmental label that is awarded to goods which meet
the environmental requirements of the EU ecolabelling scheme (for details see
the environmental credentials of our televisions.
9
NOTE
• Methods for calculating the Energy Efficiency Index and the annual on-mode energy
consumption are set out in Annex II of Regulation (EU) No 1062/2010. The determination
of the on-mode consumption is based on the international standard IEC 62087 Ed. 2
June 2011
91
Download from Www.Somanuals.com. All Manuals Search And Download.
13P02-PL-NG
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Sharp Cash Register ER 3231 User Manual
Sharp Flat Panel Television C 32LE360EN User Manual
Sharp Projector XG C430X User Manual
Sony Camera Accessories VF 74CP User Manual
Sony MiniDisc Player MZ E80 User Manual
Sony Personal Computer VGC RA826G User Manual
Speed Queen Clothes Dryer AC06 500 User Manual
Speed Queen Washer AWM371W2 User Manual
StarTechcom Computer Hardware PEXUSB3S400 User Manual
Swann Webcam SW U WC20NA User Manual