54GS-61S
70GS-61S
COLOUR TELEVISION
OPERATION MANUAL
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick reference Guide
Accessories
å
54GS-61S
70GS-61S
FARBFERNSEHGERAT
BEDIENUNGSANLEITUNG
Remote control
Operation Manual
Type-AA Dry Batteries
Remote Control Battery Installation
Before using the TV set for the first time, install the supplied dry batteries in the remote control.
1. With your thumb nail, pull up
the slit as indicated by the
arrow to remove the battery
cover.
2. Insert two batteries 1.5 V (Size
"AA"). Be sure to match the bat-
tery A/D terminals with the A/D
marks inside the compartment.
3. Replace the battery cover.
NOTE: • Remove batteries if weak or if the unit is not in use for long periods.
• Do not mix old and new batteries.
• Incorrect installation of the batteries may damage the remote control.
Antena connections -TV set only -
Mains Socket Outlet
AC 220~240 V, 50 Hz
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Antenna connections - VCR and TV -
BACK OF TV
Mains Socket Outlet
AC 220~240 V, 50 Hz
SCART Lead
(Not supplied)
Aerial Cable
(Not supplied)
Aerial
(Not supplied)
Aerial Lead
(Not supplied)
Mains Socket Outlet
AC 220~240 V, 50 Hz
BACK OF VCR
RF out
Aerial in
Audio/Video
NOTE: See on -Typical connections- (page 27) for details of further connection possibilities.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Remote control
TV
1. Stand-by ON/OFF switch (TV)
2. Power ON / OFF switch (VCR)
Video
TV
1.
3. Digit buttons 0 ~ 9
4. Flashback button
19.
20.
Teletext
TV
5. Colour button (green)
6. Colour button (red)
2.
3.
7. Volume Down/Cursor control Left
8. Menu button
4.
21.
22.
Teletext
9. Reveal button
10. List selector
5.
6.
11. Store button
23.
24.
12. Cancel button
13. Top/ Bottom/Full button
14. Reset button
7.
25.
Video
TV
15. Rewind/picture search/reverse
16. Play button
26.
27.
8.
9.
17. Pause / Still button
18. Stop button
28.
29.
10.
19. TV / VIDEO selector
20. Channel call button
21. Single/Double entry
11.
12.
13.
30.
31.
32.
Teletext
TV
22. Colour button (yellow)
23. Colour button (blue)
14.
15.
33.
34.
24. Channel Up/Cursor control Up
25. Volume Up/Cursor control Right
26. Channel Down/Cursor control Down
27. TV button
16.
35.
17.
18.
36.
37.
TV/Teletext
TV
28. Time button
29. Sound mode selector
30. Hold button
Teletext
TV
31. Sound Mute button
Teletext
32. Text/Mix button
33. Index button
Video
34. Channel Up selector
35. Fast forward/picture search/forward
36. Channel Down selector
37. Record button
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Controls & Terminals
FRONT TV
54GS-61S
1. Main Power
On/Off Switch
2. Power Indicator
3. Program Selector
(UP/DOWN)
4. Volume Buttons
(UP/DOWN)
6
5 4 3 2
1
8
5. Remote Control Sensor
6. Sound Indicator
7. Remote Control Indicator
(Only for model 70GS-61S)
8. DOOR
70GS-61S
7
6
5 4 3 2
1
8
Behind the door
9. Headphone Socket
(3.5 mm Ø / 16~600 Ω)
AUDIO
n
VIDEO
9
å
HOW TO OPEN THE DOOR
Press the top of the door, opening it slightly.
Hook your finger inside and pull open.
REAR TV
3
RF Input
1. Antenna terminal
21-pin In/Out
2. 21-pin Euro SCART (RGB)
3. 21-pin Audio/Video (AV-1)
With S-Video Input
2
1
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Auto Installation
Auto Installation System
Your television set is provided with an Automatic Installation System which
makes Installation easier.
54GS-61S
This new system is activated when you turn on the TV for the first time.
Procedure:
1. Connect the antenna jack in the antenna input terminal on the rear side
of your TV-set. Then connect the TV power cable to a 220 ~ 240 V
system.
Power Indicator
Main power button
2. Press the main power button (®), on the right hand side of the TV set,
70GS-61S
and the AUTO INSTALLATION message will appear on the screen.
3. Put batteries into the remote control and follow the instructions on the
screen.
The TV will go through the following steps Automatically and sequentially:
Power Indicator
Main power button
Language
Language: To select the menu language:
4. Press the RED button
to select the language.
to continue.
5. Press the BLUE button
BLUE
RED
Country: To select your country:
Contry
6. Press the RED button
to select your country.
7. Press the BLUE button
to continue and follow the instructions on
the screen.
Automatic Channel Sorting System (ASS): The TV set SEARCHES FOR
FREQUENCIES, memorises the channels found, and sorts them (according
to technical criteria) from Pr-01 of the TV, to a maximum of 99 programmes.
This tuning process may take several minutes to perform.
Editing: When the AUTOMATIC SEARCH has been completed, the "Stored
programmes" menu appears on the screen. In this menu, you can change
the order of the channels and change or give the channels a four-letter
name.
BLUE
RED
Searching
On next page is a detailed explanation of editing options about "Stored
programmes" menu.
Pr01
NOTE: You may not have to follow this procedure if it has already been
done for you at the establishment where you purchased your TV. If this is
the case go on to the section entitled "Switching ON" (page 8).
If you need to repeat the AUTO INSTALLATION, read on page 17 –Auto
Channel preset…-.
01 %
Searching,
please wait.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Stored programmes
Stored programmes menu
When the TV has finished the automatic search, the "Stored programmes"
menu will appear on screen with a list of the channels, which have been
memorised with the available options
Stored programmes:
Pr 01 CH21 BBC1
Pr 02 CH31 BBC2
Pr 03 CH41 ITV
Pr 04 CH51 CH4
Pr 05 CH61 CNN
Pr 06 ––––
Pr 07 ––––
Pr 08 ––––
Pr 09 ––––
Pr 10 ––––
––––
––––
––––
––––
––––
a) Select programme to be edited Ǟ E/F.
b) Edit this program Ǟ RED button
.
c) Go to sorting mode Ǟ GREEN button
.
red
green
yellow
blue
२
२
२
२
Edit this programm
Go to sorting mode
Delete this programm
Exit this menu
d) Delete this program Ǟ YELLOW button
e) Exit this menu Ǟ BLUE button
.
.
With these options, you will be able to organise the real channels (CH **)
memorised in the TV programmes (Pr 01 ... Pr 99) and put them into your
own preferred order.
The following is a detailed explanation of options a), b), c), d) and e).
Change name
a) Select a programme to be edited.
Use this option to select a programme from the list. Each time you press
E/F the memorised channel will be viewed and will remain selected
on the list by means of white background.
Stored programmes:
Pr 01 CH21 BBC1
Pr 02 CH31 BBC2
Pr 03 CH41 ITV
Pr 04 CH51 CH4
Pr 05 CH61 CNN
Pr 06 ––––
Pr 07 ––––
Pr 08 ––––
Pr 09 ––––
Pr 10 ––––
––––
––––
––––
––––
––––
b) Edit this program (Change name)
Use this option for giving a name made up of four digits to the channels or
for changing the one, which appears on some channels, in the following
way:
Press the MENU
button to exit.
b.1 Select the channel using the Cursor UP/DOWN buttons E/F.
b.2 Press the RED button
.
b.3 Press the Cursor UP button Eto change the first letter.
Letters A to Z of the alphabet, a blank space and the numbers 0 to 9 will
appear sequentially. Some of the broadcasting stations names such as
BBC1 or ITV are already incorporated in the TV and appear among the
alphabet to make this task easier.
Press the Cursor DOWN button F to go backwards in the sequence.
b.4 Press the I buttons for changing the position of the cursor and the
E/F buttons for changing the letters.
When you have finished the fourth letter, press the Cursor I button to quit
the Change of Name option.
Sort channels
c) Go to sorting mode (Sort channels)
Use this option for sorting the channels (CH) into the desired programme
(Pr), as follows:
Stored programmes:
Pr 01 CH21 BBC1
Pr 02 CH31 BBC2
Pr 03 CH41 ITV
Pr 04 CH51 CH4
Pr 05 CH61 CNN
c.1 Select the programme (Pr) you wish to change using Cursor UP/DOWN
buttons E/F(marked with white background).
Pr 06 ––––
Pr 07 ––––
Pr 08 ––––
Pr 09 ––––
Pr 10 ––––
––––
––––
––––
––––
––––
c.2 Press the GREEN button
.
c.3 Press the Cursor UP/DOWN buttons E/F to move the channel
(CH) to the required position.
Insert the marked
programme in the
position you wish.
c.2 Press the GREEN button
to finish.
Press green button
to finish.
Delete channels
d) Delete this program (Delete channels)
Use this option for cancelling programmes which are badly tuned or repea-
Stored programmes:
ted. When the YELLOW button
is pressed, the TV will ask for confir-
Pr 01 CH21 BBC1
Pr 02 CH31 BBC2
Pr 03 CH41 ITV
Pr 04 CH51 CH4
Pr 05 CH61 CNN
mation that you wish to cancel, and you must press the YELLOW button
again. The channels that follow it on the list will automatically rearran-
ge themselves by moving up one programme (Pr) place, to restore the space
of the cancelled channel (CH).
Pr 06 ––––
Pr 07 ––––
Pr 08 ––––
Pr 09 ––––
Pr 10 ––––
––––
––––
––––
––––
––––
WARNING!
This programme will be erased
e) Exit this menu
Press yellow button again
to confirm.
Use this option to quit the menu by pressing the BLUE button
.
Or press any
other button to cancel
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Switching on
Power supply on/off button
This TV memorizes the Mode last used when it was switched off. When the main power button (ćl) is pressed to turn on
the set, the power indicator will light and the set will resume in either the Stand-by mode or Programme mode, depen-
ding upon its condition when it was switched off.
70GS-61S
54GS-61S
Power Indicator
Power Indicator
Main power button
Main power button
On-Off/Stand-by button
When the TV is in Stand-by mode, to turn ON the TV press the Stand-by but-
ton (æ TV) on the remote control, or one of the four buttons on the TV
(
Va/\, VCH/\). The TV will change from Stand-by mode to Program
mode, the sound indicator will light a few moments and an image will appear
on the screen. Press the Stand-by button ( æTV) again and the TV will return
to Stand-by mode.
Blue back off timer
If noise appears in TV or VCR mode, the screen turns blue. The blue back off-timer is then engaged and will automati-
cally switch the set to Stand-by mode after 15 minutes.
Real Channel Number (terrestrial/cable TV Programmes)
Channel setting is mainly performed using the remote control. Please follow the instructions with the remote control in
hand.
Television broadcasting stations have channel numbers assigned to them (real channel numbers). You can assign your
own channel number to a real channel and store it in the programme channel memory.
CORRESPONDING REAL CHANNEL
STATION SIGNALS
REAL CHANNEL NUMBER
ESPECIALLY AVAILABLE
V
H
E-2 ~ E-4
E-5 ~ E-12
CH 02 ~ CH 04
CH 05 ~ CH 12
CH 13 ~ CH 20
CH 21 ~ CH 69
CC 01 ~ CC 10
CC 11 ~ CC 20
CC 21 ~ CC 41
CC 42 ~ CC 48
CC 49 ~ CC 55
CH 75 ~ CH 79
F
A ~ H
In Italy
UHF
E-21 ~ E-69
M1/S1 ~ M10/S10
U1/S11 ~ U10/S20
S21 ~ S41
C
A
M1 ~ M7
In Holland
T
V
B1 ~ B7
S’1/S21 ~ S’5/S25
I n Switzerland
8
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Operation
Channel Selection
Ꭽ Channel selector (CH /\/ CH
Select the programme channel number you want to see, using the channel
selector buttons (E/F).
V) buttons
Pr 01
Pr 02
Pr 03
Pr 04
Pr 05
Pr 06
Pr 07
Pr 08
Pr 09
Pr 10
➜
As you press these buttons a list of channels appears.
Press the E/F again to select another channel.
Note: The channels that are in SKIP mode cannot be seen with this
buttons. Use numerical buttons to display these channels.
Ꭾ Single/Double entry selector (3)
This button selects between one or two digit channel number entry.
PR *
PR * *
Press
Single digit
entry mode
Double digit
entry mode
3
Ꭿ 0~9 Digit buttons
You can select channels by pressing the 0 ~ 9 digit buttons on the remote control.
For single and double digit entry see section B above.
൳ Flash-back button (
)
Press this button to switch the currently viewed channel to the previously viewed channel, and vice versa.
This function is only available in programme channel selection mode.
I.e. not when AV terminals are in use.
Pr 01
Pr 12
Press
Previously
viewed channel
Currently
viewed channel
൴ Channel Call button (
)
l
BCC1 01
STEREO
Press the button to display the current programme number and the sound
mode on the screen. The name if it has been set, the remaining time for off-
timer, the real-timer and the on-timer, if they have been set, is also display-
ed on the screen.
Press the button again to make the on-screen disappear.
If the channel you are viewing has been set to be skipped with the channel
skip function, the programme number is displayed in red. If the channel was
fine-tuned, programme number will be displayed in yellow.
OFF TIMER: 120 Min.
TIMER
: 10:30
ON TIMER : 18:00
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Adjustments
Ꭽ Loudspeakers Sound Volume (C/I)
Use the C/Ibuttons to increase/decrease the volume level. The volume indicator
will appear on the screen.
Note: To adjust the headphones volume, see the “SOUND menu” on page 14.
Ꭾ Sound mute button (c)
Press the button to mute the sound. “MUTE” appears on the screen. Press the button again to turn the sound back on.
MUTE
̃/i
Ꭿ Sound Mode Selector button
I/II/I+II
Press the button to change the sound in the speakers. The sound mode will appear on the screen.
MONO
STEREO
Depending on the sound transmission the sound reproduction can be chosen as indicated below:
When the TV set is receiving a STEREO programme, the TV selects STEREO automatically, and you can change:
STEREOǟǞMONO
When the TV is receiving a BILINGUAL programme, the TV selects DUAL CHANNEL A automatically, and you can
change:
DUAL CHANNEL AǟǞDUAL CHANNEL BǟǞDUAL CHANNEL A BǟǞMONO
When the TV is receiving a MONO (FM) programme, the TV set selects MONO automatically but the sound mode can-
not be change.
Note: See the -SOUND MODE- (page 14) to change the Sound Mode in the headphones.
Sound Indicator: When the TV set is receiving a STEREO, BILINGUAL or MONO NICAM programme the Sound Indicator
lights.
External source: When you are watching the TV-set through the Euro-SCART, AV-1 or S-Video terminals, the Sound
Mode Selector button and Sound indicator light are not operative.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Other Features
Ꭽ TV/Video selector button (TV/VIDEO)
TV/Video Menu
With this button you can select either source of input for the TV.
1. When the TV/VIDEO button b is pressed, the «TV/Video Menu» selec-
tion menu appears.
2. Press the button
of the corresponding colour to select one of the
input sources, as indicated in the diagram.
The selected input will appear on the screen.
3. Press the TV/VIDEO button b again to exit the menu.
RED
GREEN
YELLOW
BLUE
Ꭾ CLOCK button (f)
Press the button to display the current time on the screen.
Note: that this function operates only if the station you are tuned to broadcasts a teletext signal.
Ꭿ Headphone jack
1. Press the MENU button b, to see the MAIN Menu.
2. Press the GREEN button
to see the SOUND Menu.
3. Press the GREEN button
to select HEADPHONE VOLUME.
4. Adjust the headphone volume with the Cursor LEFT / RIGHT C/I buttons.
Caution: To protect your ears, reduce the volume of the headphones before connecting them.
5. Make sure that you insert the headphone plug all the way.
6. Press the TV button
b
to close the Menu.
Note: the SPATIAL EXPANDER Effect cannot be adjusted for the headphones.
INSIDE THE DOOR
n
VIDEO
AUDIO
3.5 mm Ø Jack plug
Earphone or Headphone
Impedance 16~600 Ω
VCR Mode
SHARP VCR can be operated using the TV remote control.
Channel selectors (V CH /\)
These buttons are used for changing channels and setting the
timer.
Fast forw ard/ picture search forw ard
G) buttons.
(
F) and
Rewind/picture search reverse (
Both these buttons have the following function:
Play button B
Press this button to start playback.
ᕃ To move through the cassette faster, press to STOP button
and then press the F or G button to fast forward or
rewind the cassette.
Record buttons M
Press both buttons simultaneously to start recording. If the
video cassette is protected against recording, it will be ejec-
ted.
ᕄ Press the STOP button to stop fast forward or rewind.
Picture Search
ᕃ During playback, press the
G button for reverse search
F button for forward picture
search, or the
ᕄ Press the PLAY button to resume normal playback.
Stop button L
Press this button to stop playback or recording.
Operate button Bl VCR
Press this button to turn your VCR on.
For further details, please refer to operation manual of your VCR.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Structures
This TV set has: a MAIN MENU with four basic menus, which permit
access to the different functions of the TV.
These menus are as indicated below.
MENU Button
By pressing the MENU Button:
Main Menu
Button
Menu
Functions / Options
CONTRAST
COLOUR
PICTURE
BRIGHTNESS
SHARPNESS
NORMALISE
TINT CONTROL
ECO MODE
RED
ADJUSTMENTS
HEADPHONES
LOUDSPEAKERS
VOLUME
VOLUME
BASS
TREBLE
BASS
TREBLE
AUDIO
GREEN
BALANCE
BALANCE
NORMALISE
HEADPHONES (MODE)
ADJUSTMENTS
NORMALISE
LOUDSPEAKERS (MODE)
SPATIAL EXPANDER
A.S.L.
LANGUAGE
ON TIMER: TIME / SWITCH ON
OFF TIMER: OFF / 120 Min. / 90 Min. / 60 Min. / 30 Min.
DEMO
OTHER
FUNCTIONS
YELLOW
CHILD LOCK: LOCK ALL / LOCK PROGRAMME / CLEAR LOCK
CHANNEL: CH (Aerial) / CC (Cable)
SEARCH (Frequency Tuning)
FINE TUNE
INSTALL
AND
BLUE
MODE: TV / VCR / SKIP
TUNE
EDIT: Edit this program / Go to sorting mode / Delete this program/
Exit this menu
AUTO-TUNE: AUTO INSTALLATION
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Adjustments
MAIN Menu
Picture quality: CONTRAST, COLOUR, BRIGHTNESS, SHARPNESS, NOR-
MALISE, TINT CONTROL and ECO MODE are adjustable in this menu.
1. Press the MENU button b, to see the MAIN Menu.
2. Press the RED button
to see the PICTURE Menu.
RED
PICTURE Menu
PICTURE Menu
3. Press the Cursor UP/DOWN buttons E/Fto select an option
from the list: CONTRAST, COLOUR, BRIGHTNESS, SHARPNESS or
NORMALISE.
CONTRAST
COLOUR
The selected item will appear on screen in a blue box.
BRIGHTNESS
SHARPNESS
NORMALISE
4. Adjust the picture quality to your liking with the Cursor LEFT/RIGHT
buttons C/I.
˾˾˾˾˾˾˾˾˾˾˾˾˾˾˾˾˾˾˾
NORMALISE Menu
5. Press the MENU button b, if you wish to normalize video levels to
default factory settings.
NORMALISE Menu
CONTRAST
COLOUR
6. Press continuously E/F arrows will appear the TINT CON-
TROL and ECO MODE
BRIGHTNESS
SHARPNESS
NORMALISE
Press the MENU
button to
normalise...
TINT CONTROL
TINT CONTROL
7.a. Select TINT CONTROL and press the Cursor LEFT/RIGHT buttons
C/I, to adjust your desired skin colour (blue or red).
TINT
CONTROL
ECO MODE
ECO MODE
ECO MODE
7.b. Select ECO MODE “ON” to reduce contrast in areas of the picture
that are excessively white.
TINT
CONTROL
8. Press the TV button b, to close the Menu.
OFF
ECO MODE
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Sound Setting Mode
Sound quality (VOLUME, BASS, TREBLE, BALANCE, NORMALISE, SOUND MODE, SPATIAL EXPANDER and A.S.L.)
are adjustable in this menu.
MAIN Menu
1. Press the MENU button b, to see the MAIN Menu.
2. Press the GREEN button
to see the SOUND Menu.
GREEN
SOUND Menu
SOUND Menu
to select LOUDSPEAKERS or press the
to select HEADPHONES.
3. Press the RED button
GREEN button
LOUDSPEAKERS
VOLUME
BASS
4. Press the Cursor UP / DOWN buttons E/F to select an option
from the list: VOLUME, BASS, TREBLE, BALANCE or NORMALISE.
TREBLE
BALANCE
NORMALISE
The selected option will appear in white letters on a blue background
5. Adjust the sound quality according to your preferences with the Cursor
LEFT / RIGHT buttons C/I.
˾˾˾˾˾˾˾˾˾˾˾˾˾˾˾˾˾˾˾
LOUDSPEAKERS
HEADPHONES
GREEN
RED
NORMALISE
NORMALISE
Select NORMALISE and press the MENU button b, to normalise audio
levels to default factory settings.
6. Press the Cursor DOWN button F to see more options:
SPEAKERS (Mode), HEADPHONES (Mode), SPATIAL EXPANDER. And
A.S.L.
VOLUME
BASS
LOUDSPEAKERS
TREBLE
BALANCE
NORMALISE
Press the MENU
button to normalise
SOUND Mode
SOUND Mode
7. Press the Cursor UP / DOWN buttons E/Fto select: LOUDSPE-
AKERS or HEADPHONES.
8. Press the Cursor LEFT / RIGHT buttons C/Ito change to sound mode,
as indicated on page 10, in the "Sound Mode Selector" chapter.
Select SPATIAL EXPANDER and press the Cursor LEFT / RIGHT buttons
C/I to activate or deactivate the SPATIAL EXPANDER Effect [ᕡ].
Select A.S.L. (Automatic Sound Limiter) and press the Cursor LEFT /
RIGHT buttons C/Ito activate or deactivate the Automatic Sound Limiter
[ᕢ]
LOUDSPEAKERS
HEADPHONES
STEREO
SPATIAL
EXPANDER
A.S.L.
9. Press the TV button b to close the Menu.
ᕡ SPATIAL EXPANDER: the spatial expander effect depends on whether the feed is MONO or STEREO.
If the source feed is MONO, it produces a “Pseudo Stereo” effect.
If the source feed is STEREO, it produces a spatial expander effect, expanding the stereophonic image
ᕢ Automatic Sound Limiter (A.S.L.): Quite frequently, different audio sources do not have the same volume level;
for example, this can occur when changing from a movie to a commercial. The Automatic Sound Limiter solves this
problem by adjusting the volume to the same level.
Note: the SPATIAL EXPANDER Effect and A.S.L. do not work with headphones.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Features setting mode
MAIN Menu
In this mode you can select a LANGUAGE for screen menus, set the ON-
TIMER an OFF-TIMER, view the all functions implemented in your TV set
demonstration and set the CHILD LOCK.
YELLOW
1. Press the MENU button b, to see the MAIN Menu.
2. Press the YELLOW button
to see the FEATURES Menu
FEATURES Menu - LANGUAGE
FEATURES Menu
ENGLISH
DEUTSCH
LANGUAGE
3. Press the Cursor UP/DOWN buttons E/Fto select an option from
the list:
NEDERLANDS
FRANÇAIS
ITALIANO
ESPAÑOL
DANSK
SVENSKA
NORSK
ON TIMER
LANGUAGE, ON TIMER, OFF TIMER, DEMO or CHILD LOCK.
The selected item will appear on screen in white letters on a blue
background.
OFF TIMER
DEMO
SUOMI
PORTUGUÊS
Menu LANGUAGE
4. Press the Cursor RIGHT button Ito select the list of languages.
5. Press the Cursor UP/DOWN buttons E/F to select the menu
language.
MEMORIZE
GREEN
The selected language will appear in white letters.
6. Press the GREEN button
to memorize.
FEATURES Menu - ON TIMER
7. Press the TV button b, to close the Menu.
ON TIMER
LANGUAGE
The On-Timer is used to automatically switch on the TV set during the day.
4. Press the Cursor RIGHT button Ito select the "TIME" (current time) in
white letters.
5. To programme the current TIME: In order to be able to run this function,
it is essential to adjust the current time.
TIME
SWITCH ON **:**
08:30
ON TIMER
OFF TIMER
DEMO
Automatic TIME adjustment: If you are receiving a channel with Teletext,
the TIME is automatically synchronized with the Teletext clock.
* Important: If a signal via satellite is being received, or if correct time can-
not be obtained, the time will have to be adjusted manually.
Manual TIME adjustment: To adjust the time manually, this should be
done with the 0 to 9 digit buttons.
CANCEL
GREEN
6. Press the Cursor RIGHT button Ito select: SWITCH ON in white letters.
7. Adjusting the SWITCH ON Time. Once the current TIME has been adjusted, the SWITCH ON Time can be set with the
0 to 9 digit buttons.
The GREEN button
is used to cancel the SWITCH ON function.
8. Press the TV button b to close the Menu.
9. Press the Stand-by button (æ TV) on the remote control to put the TV into switch on Stand-by Mode.
* As a safety precaution, in the case of nobody being home when the television switches on automatically, the television
will disconnect itself after 120 minutes; if it is to continue to run, any button on the remote control functions should be
pressed.
Note: In the event of a power cut, disconnection from the plug or television switch, all the data on the ON TIMER will be
cancelled.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
OFF TIMER
FEATURES Menu - OFF TIMER
The OFF TIMER automatically switches the TV set to standby mode after
a predetermined period, (30, 60, 90 or 120 minutes).
LANGUAGE
ON TIMER
4. Press the Cursor RIGHT button I to select “OFF.”
OFF
OFF TIMER
5. Press the Cursor UP/DOWN buttons E/F to set the desired
time in white letters.
120 Min.
90 Min.
60 Min.
DEMO
30 Min.
Select “OFF” to disconnect off-timer.
MEMORIZE
6. Press the GREEN button
to memorize.
GREEN
After the selected time has passed, the TV will turn itself off automatically,
and switch to Stand-by mode.
7. Press the TV button b, to close the Menu.
Note: The OFF TIMER data will be cancelled if you turn off the TV by the Standby button (æ TV) on the remote control
or with the Main power button (®) on the TV set.
DEMO (Demonstration)
The demonstration function allows you to see all the menus implemented
LANGUAGE
in this TV set.
1. Press the MENU button b, to see the MAIN Menu.
ON TIMER
2. Press the YELLOW button
to see the FEATURES Menu.
OFF TIMER
DEMO
3. Press the Cursor DOWN button Fto select DEMO.
4. Press the MENU button b to begin the demonstration.
5. Press any button on remote control to exit this function when you wish.
Press the MENU
button to start
the DEMO
16
Download from Www.Somanuals.com. All Manuals Search And Download.
TV Channel Setting
Auto Channel Preset with Sorting (ACSS: Automatic Channel Sorting System)
MAIN Menu
This function frees you of troublesome channel presetting procedures.
Simply follow the instructions below to automatically store all on-air and
cable real channels into the programme channel memories.
1. Press the MENU button b, to see the MAIN Menu.
BLUE
TUNE Menu
2. Press the BLUE button
to see the TUNE Menu.
Pr 06
CH21
CHANNEL
TUNE Menu
SEARCH
F-TUNE
MODE
3. Press the Cursor UP button Eto select AUTO-TUNE (blue box).
4. Press the MENU button b fto see the AUTO INSTALLATION Menu.
Press MENU button
to Auto-tune
EDIT
WARNING! All
pretuned channels
will be lost.
AUTO-TUNE
Language
Language
5. Press the RED button
to select the menu language.
to continue.
6. Press the BLUE button
BLUE
RED
Country
Country
7. Press the RED button
to select your country.
8. Press the BLUE button
to continue and follow the instructions on
the screen.
Searching
The TV set SEARCHES FOR FREQUENCIES, memorises the channels
found and sorts them (according to technical criteria) from Pr-01 of the TV,
to a maximum of 99 programmes.
This tuning process may take several minutes to perform.
BLUE
RED
Stored programmes
Stored programmes:
When the AUTOMATIC SEARCH has been completed, the "Stored pro-
grammes" menu will appear on screen. In this menu, you can change the
order of the channels and change or give the channels a four letter name.
Pr 01 CH21 BBC1
Pr 02 CH31 BBC2
Pr 03 CH41 ITV
Pr 04 CH51 CH4
Pr 05 CH61 CNN
Pr 06 ––––
Pr 07 ––––
Pr 08 ––––
Pr 09 ––––
Pr 10 ––––
––––
––––
––––
––––
––––
If you wish to rename the channels, or change the order; refer to the page
7, chapter Stored programmes.
red
२
२
२
२
Edit this programm
Go to sorting mode
Delete this programm
Exit this menu
If you wish to go out of the menu, press the BLUE button
.
green
yellow
blue
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Channel Preset (PRESET USING REAL CHANNEL NUMBERS)
1. Depending on the programme channel you want to preset, press
the 6 button to select single / double digit entry.
2. Select the programme channel number you want to preset with the
0 ~ 9 digit buttons.
3. Press the MENU button b to see the MAIN Menu.
MAIN Menu
MAIN Menu
to see the TUNE Menu.
4. Press the BLUE button
BLUE
TUNE Menu
TUNE Menu
The “CHANNEL” option is already selected.
CH
CC
Pr 06
CH 21
CHANNEL
SEARCH
F - TUNE
MODE
5. Press the Cursor RIGHT buttons I, to choose the CH / CC option.
6. Press the Cursor DOWN button F to select (with white letters)
the Channel type: CH (Aerial) or CC (Cable).
7. Enter the real channel number you want to store with the 0 ~ 9 digit
EDIT
buttons (two digit entry only).
AUTO - TUNE
MEMORIZE
8. Press the GREEN button
to memorize.
8. Press the TV button b to clear the on-screen display.
GREEN
9. Repeat the above procedure for presetting other programme.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Manual Channel Preset (PRESET USING FREQUENCY TUNING)
1. Depending on the programme channel you want to preset, press
the 6 button to select single / double digit entry.
2. Select the programme channel number you want to preset with the
0 ~ 9 digit buttons.
3. Press the MENU button b to see the MAIN Menu.
MAIN Menu
MAIN Menu
to see the TUNE Menu.
4. Press the BLUE button
BLUE
TUNE Menu
TUNE Menu
The “CHANNEL” option is already selected.
CH
CC
Pr 06
CH 21
CHANNEL
SEARCH
F - TUNE
MODE
5. Press the Cursor RIGHT buttons I, to choose the CH / CC option.
6. Press the Cursor DOWN button F to select (with white letters)
the Channel type: CH (Aerial) or CC (Cable).
7. Press the Cursor LEFT C buttons to select CHANNEL
EDIT
8. Press the Cursor DOWN button F to select SEARCH.
AUTO - TUNE
SEARCH
SEARCH
9. Press the Cursor LEFT/RIGHT buttons C/I to start preset.
Pr 06
CH 21
CHANNEL
SEARCH
F-TUNE
MODE
The tuning sequence will stop when a signal is detected, if the sig-
nal is not the required channel press C or I to continue.
10. Press the GREEN button
to memorize.
11. Press the TV button b to clear the on-screen display.
EDIT
12. Repeat the above procedure for presetting other programme chan-
AUTO-TUNE
MEMORIZE
nels.
GREEN
19
Download from Www.Somanuals.com. All Manuals Search And Download.
After preset has been performed
The following features are available for preset channels:
MAIN Menu
Ꭽ FINE TUNING
When a preset programme channel is not exactly tuned, you can fine tune the
channel in this mode.
BLUE
1. Select the programme channel number you want to tune using the
0 ~ 9 digit buttons.
TUNE Menu
2. Press the MENU button b to see the MAIN Menu.
CH
CC
Pr 06
CH 21
CHANNEL
SEARCH
F-TUNE
MAIN Menu
3. Press the BLUE button
to see the TUNE Menu.
TUNE Menu
4. Press the Cursor DOWN button F twice to select FINE TUNE (blue
MODE
box).
EDIT
AUTO -TUNE
MEMORIZE
FINE TUNE Menu
FINE TUNE Menu
5. Press and hold the Cursor LEFT C or RIGHT Ibuttons, until the best
tuning position is found, for the best picture and sound.
Pr 06
CH 21
CHANNEL
SEARCH
F-TUNE
After Fine tuning the programme number will turn from green to yellow.
6. Press the GREEN button
to memorize.
7. Press the TV button b to clear the on-screen display.
MODE
Repeat the above procedure for other programme channels as required.
EDIT
AUTO - TUNE
MEMORIZE
Ꭾ Mode
GREEN
MODE
This feature allows you to select TV, VCR, SKIP. First follow the above
steps 1., 2., and 3. The TUNE Menu will appear on screen.
Pr 06
CH 21
CHANNEL
SEARCH
F-TUNE
4. Press the Cursor DOWN button F to select MODE.
5. Press the Cursor RIGHT button I to choose the TV / VCR / SKIP
option.
TV
VCR
SKIP
MODE
6. Press the Cursor DOWN button F to select (with white letters)
TV, VCR or SKIP:
EDIT
TV:
If the TV signal is weak the image can shake.
In this case put it in TV mode.
AUTO - TUNE
MEMORIZE
VCR: In some case, the upper part of the picture may be distorted when
receiving signal from a VCR via RF terminal on the TV set.
Selecting this option will help to reduce his effect.
GREEN
SKIP: Allows you to SKIP channels you do not want to view when using
channels selector (CH ∑/CH œ) buttons.
7. Press the GREEN button
to memorize.
8. Press the TV button b to clear the on-screen display.
9. Repeat the above procedure for other programme channels as requi-
red.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
TELETEXT - Mode
Ꭽ What is Teletext?
Teletext is an information service, organized like a magazine, which is provided
by some television stations in addition to regular television broadcasting. Your
television receives special Teletext signals broadcast by a TV station, processes
the information and displays it graphically on the screen. News, weather and
sports information, stock exchange prices, program previews and closed captio-
ning for the deaf are among the many services available through Teletext.
Teletext information is organized much like a magazine: according to pages and
sub-pages. The basic unit of displayed information is the page. A sub-page is
one of a series of pages.
Teletext reception is controlled by using the remote control. Refer to the appro-
priate button descriptions for operation of the Teletext functions.
Ꭾ Teletext features
Depending on the TV programme, the Teletext pages are transmitted using diffe-
rent system. Your SHARP TV is adjusted to receive two Teletext systems, name-
ly FLOF and LIST, which are automatically identified by the receiver. The user can
easily identify them by the manner in which they appear on the screen.
FLOF
LIST
TELETEXT
TELETEXT
NEWS
RED
SPORT
MOVIE
WEATHER
CYAN
100
200
300
400
GREEN
YELLOW
CYAN
RED
GREEN
YELLOW
Ꭿ To switch ON and switch OFF the Teletext
1. Select the TV channel with Teletext information that you want to see.
2. Press the TEXT/MIX button (a/b) to select Teletext mode.
3. Press the TV button ➜ to exit Teletext mode.
Basic TEXT features common to the two systems
a) Fast Page Selection
1. Select the appropriate programme channel.
2. Press the TEXT/MIX button (a/b) to select Teletext mode.
3. To recall a page number displayed in the coloured brackets, simply press the corresponding coloured button.
b) 0-9 digit buttons
Enter a desired page number with the 0-9 digit buttons. (To select P.100: press 1, 0, 0).
c) Page selector (UP/DOWN)
You can sequentially select page numbers by pressing the Cursor UP/DOWN buttons E/F (channel selector but-
tons in the TV mode).
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Other TEXT features common to the two systems
Ꭽ TEXT/MIX button (a/b)
Every time this button is pressed, the Teletext is displayed in different modes, following the sequence described:
In TV mode: Press the TEXT/MIX button (a/b) to select Teletext mode.
In Teletext mode: Press the TEXT/MIX button (a/b) to superimpose a teletext broadcast onto the current TV pro-
gramme screen.
In Mixed mode: Press the TEXT/MIX button (a/b) again to return to the normal teletext screen.
Ꭾ HALF PAGE button (s)
Each time you press the button, the upper/lower half of the teletext page is magnified and displayed on the screen.
Ꭿ HOLD button (a)
Any teletext page or subpage can be held on the screen by pressing the HOLD button.
Press the button again to cancel the hold mode.
൳ REVEAL button (d)
Press this button to reveal hidden information such as the answer to a quiz.
Press the button again to hide the information.
൴ CLOCK button (f)
In TV mode: When the TV signal with TEXT data is received, by pressing this button the real time information will
appear on the top right area of the screen.
In Teletext mode: When a selected Teletext page has hidden subpages, these pages can be seen in the following man-
ner:
1. Press the CLOCK button (f). Screen will show « = = = = »
2. Enter 4 digits corresponding to the subpage desired. E.g. 0021 for subpage number 21.
3. Wait until the page appears.
NOTE: You can use this button together with the DISPLAY CANCEL button (k). This means that you can view the main
TV picture until the subpage has been found. The on screen TV icon in the top left side of the screen will show "TXT".
When the subpage has been found, the screen will change to the subpage number.
Press the TEXT/MIX (a/b) button to view the subpage.
ꢀ CANCEL button (k)
With this button Teletext information is cancelled and TV picture is restored. «TXT» Indication is shown on screen.
In this position, the TV programme cannot be changed, being in Teletext/Cancelled mode. When a change takes place
in the Teletext information, the upper time of the cancelled page or some other indication of special pages is shown on
screen. To uncancel, press TEXT/MIX (a/b) button and the whole teletext is shown.
NOTE:This button can be used together with the clock button while awaiting subpages.
ꢁ RESET button (h)
Press the reset button (h) to return back to index page, and go out from Teletext mode.
ꢂ LIST button (LIST)
Pressing this button you force the teletext to LIST Mode. It means that row 24 (bottom row of Teletext) will not have trans-
mitter information, only the pages that user you have previously stored in the memory. (More information on the next page
-Teletext Page memory List-).
Pressing LIST button again we go out from LIST Mode and system is going to be identified again (FLOF).
ꢃ INDEX button (j)
Press the INDEX button (j) to return back to index page.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Advanced TEXT operation - LIST mode -
Teletext Page memory List
a) How to Operate Page Memory
Your TV has 40 teletext page number memories for fast recall of teletext information.
In programme positions 1 through 9, four teletext page numbers can be stored in each position; a total of 36 pages.
In programme positions 10 through 99, only one programme with 4 page numbers can be stored. If you try to store more
than 4 page numbers in a programme position between 10 and 99, the previously stored page numbers will be erased.
Select the programme channel number into which you want to store teletext page numbers.
1. Press the TEXT/MIX (a/b), button to enter the teletext mode.
2. Press the LIST button to change from FLOF system to LIST mode.
3. Press a coloured button corresponding to the coloured brackets on the screen for page number storage.
4. Enter the teletext page number using the 0 ~ 9 digit buttons (enter three digits) or channel selector E/F but-
tons.
5. Repeat steps 3. and 4. until the numbers for the desired pages have been entered
6. Press the STORE ( ) button to memorize the page numbers you require. The symbol «STORE» appears on the
screen.
7. Press the TV button to exit the teletext mode.
P100
P300
P425
Press
LIST
Input
and
YELLOW
buttons
4, 2, 5
(LIST TELETEXT)
(FLOF TELETEXT)
NEWS
RED
SPORT
MOVIE
WEATHER
CYAN
100
200
300
400
100
200
425
400
LIST
YELLOW
ᕤ ᕢ ᕥ
GREEN
YELLOW
If you want to store press
button
b) Fast Page Selection - LIST mode -
1.Select the appropriate programme channel.
2.Press the TEXT/MIX (a/b) button to enter the teletext mode.
3. Press the LIST button to change from FLOF system to LIST mode.
4.To recall a page number displayed in the coloured brackets, simply press the corresponding coloured button.
5.Press the LIST button again to return to FLOF system.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Child Lock (Channel Block)
You can lock a TV channel to prevent unsupervised TV viewing by following these procedures; the protection can apply
to the television itself "LOCK ALL" or to specific programmes "LOCK PROGRAMME". With the CHILD LOCK function, you
can also programme a time period during which the TV will be protected.
MAIN Menu
1. Press the MENU button b, to see the MAIN Menu.
2. Press the YELLOW button
to see the FEATURES Menu.
YELLOW
FEATURES Menu
FEATURES Menu
3. Press the Cursor UP button Eto select CHILD LOCK in white letters
ENGLISH
LANGUAGE
ON TIMER
OFF TIMER
DEMO
on a blue background.
DEUTSCH
NEDERLANDS
FRANÇAIS
ITALIANO
ESPAÑOL
DANSK
SVENSKA
NORSK
SUOMI
PORTUGUÊS
4. Press the MENU button b to see the CHILD LOCK Menu.
MEMORIZE
CHILD LOCK
CHILD LOCK Menu
5. Press the Cursor UP/DOWN buttons E/Fto select an option from
the list:
LOCK ALL, LOCK PROGRAMME or CLEAR LOCK
The selected item will appear on screen in a blue box.
Press the MENU
button to enter
the CHILD LOCK
menu.
CHILD LOCK
CHILD LOCK Menu - LOCK ALL
CHILD LOCK Menu - LOCK ALL
Select this option for protecting the access to the whole TV.
If necessary, repeat steps 1. to 4. to see the CHILD LOCK Menu.
LOCK ALL
NONE
ALWAYS LOCKED
START : **:**
LOCK PROG.
6. Press the Cursor RIGHT button I to select the protection type (white
letters):
Select «NONE»: To cancel the protection.
STOP: **:**
CLEAR LOCK
Select «ALWAYS LOCKED»: The access to the TV will be protected
throughout the day.
Select «START: **:**/STOP: **:**»: to block access to the TV during the
desired period of time. Enter the hours and minutes using the numeric but-
tons 0 ~ 9 to set the starting and ending times of the lock period.
MEMORIZE
GREEN
7. Press the GREEN button
to memorize.
From this time forward, whenever the protection conditions are met, the
screen will be blocked and the «LOCKED MODE» message will be display-
ed.
Press any number key on the remote control to unlock the TV.
NOTE: Since the “key” for unlocking the TV is the remote control, make sure you do not misplace it.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
LOCK PROGRAMME menu
LOCK PROGRAMME
Select this option to protect the access to separate programmes
LOCK ALL
NONE
AUTO (VPS)
ALWAYS LOCKED
START: **:**
STOP: **:**
1. Press the TV button b , to clear the on-screen display.
2. Select the programme channel number you want to protect using the
0 ~ 9 digit buttons or the channel selector E/F buttons..
3. Repeat steps 1. to 4. (Page 24) to see the CHILD LOCK Menu.
4. Press the Cursor DOWN button F to select LOCK PROGRAMME
(blue background).
LOCK PROG.
CLEAR LOCK
5. Press the Cursor RIGHT button Ito select the protection type (white let-
ters):
MEMORIZE
GREEN
Select «NONE»: To cancel the protection from the selected programme.
Select «AUTO (VPS)»: to activate automatic protection. In this mode, the
selected channel will only be locked when the VPS code is received.
Some channels send the VPS code when the program they are broad-
casting is not recommended for children.
Select «ALWAYS LOCKED»: To protect the access from the selected programme throughout the day.
Select «START: **:**/STOP: **:**»: to block access to the selected channel during the desired period of time. Enter the
hours and minutes using the number keys (0 ~ 9) set the starting and ending times of the lock period.
6. Press the GREEN button
to memorize.
From this time forward, whenever the protection conditions are met, the screen will be blocked and the «LOCKED
MODE» message will be displayed.
Press any digit button to unlock the TV.
NOTE: Since the “key” for unlocking the TV is the remote control, make sure you do not misplace it.
CLEAR LOCK menu
CLEAR LOCK
This option enables you to erase all the adjustments made to the CHILD-
LOCK function.
LOCK ALL
If necessary repeat steps 1. to 4. (Page 20) to see the CHILD LOCK Menu.
LOCK PROG.
5. Press the Cursor UP button Eto select CLEAR LOCK.
6. Press the MENU button b to confirm that you want to initialize the CHILD
Press the MENU
CLEAR LOCK
button to clear
the CHILD LOCK
LOCK system.
SYSTEM.
7. Press the TV button b to clear the on-screen display.
8. Use the CLEAR LOCK to cancel any previously set CHILD LOCK pro-
grammes to avoid malfunction when a new program is set.
Notes:
In order for the timed protection to function correctly, the internal TV clock must be set at the right time. To
check the time setting, see section "Automatic or Manual time adjustment" on page 15.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
21-pin Euro-SCART and 21-pin Audio/Video
REAR TV
1
21-pin In/Out
1. 21-pin Audio/Video (AV-1)
With S-Video Input
2. 21-pin Euro SCART
(Full connect, RGB)
RF Input
3. Antenna terminal
2
3
21-pin Euro-SCART (RGB)
1. Audio right output
2. Audio right input
3. Audio left output
4. Common earth for audio
5. Earth for blue
8. Audio-video control
9. Earth for green
10. Not used
11. Green input
12. Not used
15. Red input
16. Red/Green/Blue control
17. Earth for video
18. Earth for Red/Green/Blue control
19. Video output
6. Audio left input
7. Blue input
13. Earth for red
14. Not used
20. Video input
21. Plug shield
21-pin Audio/Video (AV-1) with S-Video Input
1. Audio right output
2. Audio right input
3. Audio left output
4. Common earth for audio
5. Earth
8. Audio-video control
9. Earth
10. Not used
11. Not used
12. Not used
13. Earth
15. Chroma S-Video input
16. Not used
17. Earth for video
18. Earth
19. Video output
20. Video input / S-Video input
21. Plug shield
6. Audio left input
7. Not used
14. Not used
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Typical connection (Videorecorder/Decoder) through the 21-pin Euro-SCART
Please refer to the operation manual of your VCR for details
Typical connection (Videorecorder and TV) through the RF terminal and Decoder through the 21-pin Euro-SCART
VCR
RF out
RF in
SCART/AV
TV
RF in
21-pin Euro-SCART
Decoder
Typical connection (DVD, Decoder and TV) through the 21-pin Euro-SCART
RF in
SCART/AV
TV
DVD Player
Video out Audio out
21-pin Euro-SCART
Decoder
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
The following conditions do not always denote trouble. Therefore, performs the checks described below before calling
for service.
If the problem cannot be corrected by the use of this guide, pull the power plug out from the electrical outlet and call for
service.
Quick
Service
Check List
Problems
Remote control does not work
Bars on screen
➜ ➜
➜
➜
➜ ➜
➜
Picture distorted
➜
➜
➜
➜
➜
➜
➜
➜
➜
➜
➜
➜
➜
Picture rolls vertically
No colour
➜ ➜
➜ ➜
➜
➜
Poor reception on some channels
Picture weak
➜ ➜ ➜
➜ ➜
➜ ➜
➜ ➜ ➜
➜
Picture lines or streaks
Picture ghosting
Picture blurred
➜
Sound OK, picture poor
Picture OK, sound poor
No picture or sound
➜ ➜ ➜
➜
➜
➜ ➜
➜
➜ ➜ ➜ ➜ ➜
➜
➜ ➜
28
Download from Www.Somanuals.com. All Manuals Search And Download.
GENERAL SPECIFICATIONS FOR TELEVISION RECEIVER
Model: 54GS-61S, 70GS-61S
1.
2.
Receiving Broadcast Standard
Receiving Channel
CCIR TV Standard system B/G, PAL
VHF:
UHF:
CATV:
E 2 - E 12 CH
E 21 - E 69 CH
S 01 - S 41 (Hyper band)
3.
4.
Receiving System
Sound:
Colour System:
Field Frequency:
GERMAN STEREO (IGR)
PAL
Pal 50/60 Hz Capability
Power Source
220V-240V AC 50 Hz
54GS-61S
70GS-61S
5.
6.
7.
Power Consumption at 240V AC 50Hz
Power Consumption at (Stand-by)
52 W
87 W
3 W max.
10 + 10 W
3 W max.
10 + 10 W
Audio Output (mpo):
Internal speaker:
8.
Dimensions (Approx.)
Width:
Height:
Depth:
601 m/m
461 m/m
478 m/m
736 m/m
570 m/m
469 m/m
9.
Viewing Area (diagonal measurement)
Weight (Approx.)
Speaker (2 pcs.)
51 cm (21")
20 Kg
66 cm (28")
30,5 Kg
10.
11.
12.
13.
14.
15.
6x13 cm.
6x13 cm.
Antenna Input Impedance
Safety
UHF 75 ohm Unbalanced
CE - MARK
EMC
CE - MARK
Accessories & etc.
a)
b)
c)
User Instruction
Remote Control
Battery
Yes
Yes
2 pcs.
16.
Other Features:
a)
b)
c)
d)
e)
f)
g)
h)
i)
Auto Installation System
ACSS function (Auto Channel Sorting System)
99 Channel Programming System
Cable and Hyperband
Teletext
OSD System (ON Screen Display)
Tint Control
Stereo (IGR)
ON-OFF Timer
j)
k)
l)
21 pin Euro SCART Connector (RGB)
21 pin Audio/Video Connector (AV-1) with S-Video Input
Headphone Terminal
m) Blue Back Noise Mute Function
n)
o)
Automatic Sound Limiter (A.S.L.)
Child Lock System
NOTE: THE “AV LINK” FUNCTION IS NOT AVAILABLE IN THIS MODEL
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
21-pin Audio/Video . . . . . . . . . . . . . . . . . . . . . . . . . 26
21-pin Euro-SCART (RGB) . . . . . . . . . . . . . . . . . . . 26
M
Main power button . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Manual Channel Preset . . . . . . . . . . . . . . . . . . 18, 19
Menu Structures . . . . . . . . . . . . . . . . . . . . . . . . . . . 12
Mono . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
A
Accessories . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
After preset has been performed . . . . . . . . . . . . . . 20
Antenna Connections . . . . . . . . . . . . . . . . . . . . . . 2, 3
A.S.L. (Automatic Sound Limiter) . . . . . . . . . . . . . . .14
Audio Adjustments . . . . . . . . . . . . . . . . . . . . . . . . . 10
Auto Channel Preset . . . . . . . . . . . . . . . . . . . . . . . . 17
Auto Installation System . . . . . . . . . . . . . . . . . . . . . . 6
Automatic Channel Sorting System . . . . . . . . . . 6, 17
O
OFF-Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
ON-Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Other Features . . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
P
Picture Adjustments . . . . . . . . . . . . . . . . . . . . . . . . 13
B
Balance . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Bass . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Bilingual . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Blue back off-timer . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Brightness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
R
REAR TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Remote Control . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Remote Control Battery Installation . . . . . . . . . . . . . 2
S
C
Safety precaution . . . . . . . . . . . . . . . . . . . . . . . . . . . 1
Sharpness . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
SKIP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
Sorting (Programme) . . . . . . . . . . . . . . . . . . . . . . . . 7
Sound Indicator . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Sound mute . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Sound Setting Mode . . . . . . . . . . . . . . . . . . . . . . . 14
Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
Stand-by button . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Stereo . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Switching on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 8
Clock button . . . . . . . . . . . . . . . . . . . . . . . . . . . 11, 22
Colour . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Contrast . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Controls & Terminals . . . . . . . . . . . . . . . . . . . . . . . . . 5
Current time . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Channel Selection . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Child Lock (Channel Block) . . . . . . . . . . . . . . . . . . 24
D
Delete (Programme) . . . . . . . . . . . . . . . . . . . . . . . . . 7
Demonstration . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
T
E
Teletext . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
Tint control . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 13
Treble . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . 28
TV/Video selector . . . . . . . . . . . . . . . . . . . . . . . . . . 11
Typical connections . . . . . . . . . . . . . . . . . . . . . . . . 27
ECO mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
Edit (Programme) . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
F
Features Setting Mode . . . . . . . . . . . . . . . . . . . . . . 15
Fine tuning . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 20
FLOF (Teletext) . . . . . . . . . . . . . . . . . . . . . . . . . . . . 21
FRONT TV . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
V
Volume (Headphones) . . . . . . . . . . . . . . . . . . . 11, 14
Volume (Loudspeakers) . . . . . . . . . . . . . . . . . . 10, 14
H
Headphone jack . . . . . . . . . . . . . . . . . . . . . . . . . . . 11
L
LIST (Teletext) . . . . . . . . . . . . . . . . . . . . . . . 21, 22, 23
30
Download from Www.Somanuals.com. All Manuals Search And Download.
å
SHARP ELECTRONICS (EUROPE) GmbH
Sonninstraße 3, 20097 Hamburg, Germany
SHARP ELECTRONICA ESPAÑA, S.A.
Polígono Industrial Can Sant Joan
Sant Cugat del Vallés (Barcelona), Spain
PRINTED IN SPAIN
TINS-XXXXBMN0
03/01
9
Download from Www.Somanuals.com. All Manuals Search And Download.
|