Sharp CRT Television 36F630 User Manual

COLOR TELEVISION

MODEL

36F630

H OPERATION MANUAL H

As an ENERGY

ENERGY

trademark.

TAR ^®Partner, SHARP has determined that this product meets the

TAR ^®guidelines for energy efficiency. ENERGY

TAR ^®is a U.S. registered

CONTENTS

PAGE

•

Closed Caption .................................................................... 14

Parent Control ................................................................. 15-25

V-CHIP Operation ....................................................... 15-22

VIEW TIMER .............................................................. 23-25

Energy Save ........................................................................ 26

Set Up ............................................................................. 27-33

EZ Setup ......................................................................... 27

Channel Setting .......................................................... 28-30

Blue Screen ............................................................... 30, 31

Personal Preference ........................................................ 32

Universal Plus Function ................................................... 33

Auto Input ............................................................................ 34

CH/Input ID .................................................................... 35, 36

Screen Format ..................................................................... 37

Using the Video and Audio Input Terminals ................... 38, 39

Using the Audio Output Terminals ....................................... 40

Operation of Universal Remote Control .......................... 41-45

Before Calling for Service .................................................... 46

Calling for Service ............................................................... 46

Specifications ...................................................................... 47

Limited Warranty .................................................................. 58

•

IMPORTANT INFORMATION/IMPORTANT

SAFEGUARDS ................................................................... 2-4

Supplied Accessories ............................................................. 5

Before Operating Your Television ............................................ 5

Antenna Connections ......................................................... 5, 6

Quick Reference Control Operation ........................................ 7

EZ SETUP during First Use .................................................... 8

Demo Mode ............................................................................ 9

Accessing the MAIN MENU screen without

•

Remote Control ...................................................................... 9

Language .............................................................................. 10

Sleep Timer .......................................................................... 10

Video Adjust ......................................................................... 11

Audio Select .................................................................... 12, 13

MTS (Multichannel TV Sound) ......................................... 12

EQUISOUND .................................................................... 12

SPEAKER (Internal Speaker Switch) ............................... 12

FAO (Fixed Audio Output) ................................................ 12

SRS .................................................................................. 12

AUDIO ADJUST ............................................................... 13

•

This operation manual includes basic operating instructions

in Spanish and French.

SPANISH is on page 48-52.

FRENCH is on page 53-57.

A679WJ ₁

36F630(01-04)

03.3.5, 2:37 PM

Dimension: 140mm x 215mm

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT INFORMATION (Continued)

WARNING – FCC Regulations state that any unauthorized changes or modifications to this equipment not

expressly approved by the manufacturer could void the user’s authority to operate this

equipment.

PRODUCT DISPOSAL

This product utilizes a Cathode Ray Tube (CRT) containing lead and tin-lead solder.

Disposal of these materials may be regulated due to environment considerations. For disposal or

recycling information, please contact your local authorities or the Electronics Industries Alliance:

www.eiae.org

CAUTION: Do not place the AC power cord under the TV set or other heavy items.

IMPORTANT SAFEGUARDS

CAUTION:

Please read all of these instructions before you operate your television and save

these instructions for later use.

Electrical energy can perform many useful functions.This unit has been engineered and manufactured to assure

your personal safety. BUT IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE

HAZARDS. In order not to defeat the safeguards incorporated in this equipment, observe the following basic

rules for its installation, use and servicing.

1. Unplug this television equipment from the wall outlet before cleaning.

2. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.

3. Do not use attachments not recommended by the television equipment manufacturer as they may cause

hazards.

4. Do not use this television equipment near water — for example, near a bath tub, washbowl, kitchen sink or

laundry tub, in a wet basement, or near a swimming pool, etc.

5. Do not place this equipment on an unstable cart, stand, or table.The television equipment may fall, causing

serious injury to a child or an adult, and serious damage to the equipment. Use only with a cart or stand

recommended by the manufacturer or sold with the television equipment.

6. Television equipment and cart combination should be moved with care. Quick stops,

excessive force, and uneven surfaces may cause the equipment and cart combination to

overturn.

7. Wall or shelf mounting should follow the manufacturer’s instructions, and should use a

mounting kit approved by the manufacturer.

8. Slots and openings in the cabinet and the back or bottom are provided for ventilation. To

insure reliable operation of the television equipment and to protect it from overheating, these openings must

not be blocked or covered. This television equipment should not be placed in a built-in insulation such as a

bookcase unless proper ventilation is provided.

9. The openings should never be covered with a cloth or other material, and the bottom openings should not

be blocked by placing the television equipment on a bed, sofa, rug, or other similar surface. This television

equipment should never be placed near or over a radiator or heat register.

10. This television equipment should be operated only from the type of power source indicated on the marking

label. If you are not sure of the type of power supplied to your home, consult your television dealer or local

power company.

For television equipment designed to operate from battery power, refer to the operating instructions.

11. As a safety feature, television equipment is equipped with a 2-wire polarized plug (one plug blade bigger

than the other). The 2-wire polarized plug will fit only one way into the power outlet.

If the plug does not fit, ask your electrician to replace your obsolete outlet.Do not modify the plug and defeat

this safety feature.

12. Do not allow anything to rest on the power cord. Do not locate this television equipment where the cord will

be abused by persons walking on it.

36F630(01-04)

03.3.5, 2:37 PM

Dimension: 140mm x 215mm

Download from Www.Somanuals.com. All Manuals Search And Download.

IMPORTANT SAFEGUARDS (Continued)

13. Follow all warnings and instructions marked on the television equipment.

14. If an outside antenna is connected to the television equipment, be sure the antenna system is grounded

so as to provide some protection against voltage surges and built-up static charges. Section 810 of the

National Electrical Code provides information with respect to proper grounding of the mast and

supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding

conductors, location of antenna-discharge unit, connection to grounding electrodes, and requirements

for the grounding electrode.

EXAMPLE OF ANTENNA GROUNDING AS PER

NATIONAL ELECTRICAL CODE

ANTENNA

LEAD IN

WIRE

GROUND

CLAMP

ANTENNA

DISCHARGE UNIT

(NEC SECTION 810-20)

ELECTRIC

SERVICE

EQUIPMENT

GROUNDING CONDUCTORS

(NEC SECTION 810-21)

GROUND CLAMPS

POWER SERVICE GROUNDING

ELECTRODE SYSTEM

(NEC ART 250, PART H)

NEC—NATIONAL ELECTRICAL CODE

15. For added protection for this television equipment during a lightning storm, or when it is left unattended and

unused for long periods of time, unplug it from the wall outlet and disconnect the antenna. This will prevent

damage to the equipment due to lightning and power-line surges.

16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric

light or power circuits, or where it can fall into such power lines or circuits. When installing an outside

antenna system, extreme care should be taken to keep from touching such power lines or circuits as contact

with them might be fatal.

17. Do not overload wall outlets and extension cords as this can result in fire or electric shock.

18. Never push objects of any kind into this television equipment through cabinet slots as they may touch

dangerous voltage points or short out parts that could result in a fire or electric shock. Never spill liquid

of any kind on the television equipment.

19. Do not attempt to service this television equipment yourself as opening or removing covers may expose you

to dangerous voltage or other hazards. Refer all servicing to qualified service personnel.

20. Unplug this television equipment from the wall outlet and refer servicing to qualified service personnel

under the following conditions:

A. When the power cord or plug is damaged or frayed.

B. If liquid has been spilled into the television equipment.

C. If the television equipment has been exposed to rain or water.

D. If the television equipment does not operate normally by following the operating instructions. Adjust

only those controls that are covered by the operating instructions as improper adjustment of other

controls may result in damage and will often require extensive work by a qualified technician to

restore the television equipment to normal operation.

E. If the television equipment has been dropped or the cabinet has been damaged.

F. When the television equipment exhibits a distinct change in performance — this indicates a need for

service.

21. Upon completion of any service or repairs to this television equipment, ask the service technician to

perform routine safety checks to determine that the television is in safe operating condition.

22. When replacement parts are required, be sure the service technician has used replacement parts

specified by the manufacturer that have the same characteristics as the original part. Unauthorized

substitutions may result in fire, electric shock, or other hazards.

36F630(01-04)

03.3.5, 2:37 PM

Dimension: 140mm x 215mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Supplied Accessories

Infrared Remote Control

RRMCGA108WJSA

Size AA

Dry Batteries

Before OperatingYour Television

Location

• For normal operation, yourTV should be located in an area of the room where cool adequate ventilation

is provided. Do not place the back of the television set in a place where free airflow will be restricted.

• Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys using

magnets or any other magnetic substance, such as iron are kept well away from the TV set.

Power

Your TV operates on 120 Volts, 60 Hz (normal household current) and has a polarized plug. If you are

unable to insert the plug fully into the outlet, try reversing the plug. Should it fail to fit, contact an

electrician. Do not defeat the safety feature of the polarized plug.

Note:

• If the set is not going to be used for a long period, such as during a vacation, unplug the set from the

wall outlet to economize power. (If the TV set is plugged in, a slight current still flows, even with the

POWER BUTTON in the OFF position.)

• Lines and other noise may appear inTV broadcast images when an FM tuner or radio is located near

the TV and both radio and TV broadcasts are being received. Should such noise appear, turn off the

radio.

• If you are listening to an AM broadcast, turn the TV off. AM broadcast signals may not be received

due to interference from the TV.

Before using the television, prepare the Remote Control

To use the remote control, insert batteries first.

•

Inserting the batteries

Battery

Cover

Pull up

• With your thumbnail, pull up the slit as indicated by the arrow to remove the battery cover. Insert two

batteries (size “AA”). Be sure to match the battery m/, terminals with the m/, marks inside the

compartment.

Antenna Connections

Antennas

• The antenna requirements for good color television reception are more important than those for

black & white television reception. For this reason, a good quality outdoor antenna is strongly

recommended.

The following is a brief explanation of the type of connections that are provided with the various

antenna systems:

F-type connector

75-ohm coaxial cable (round)

300-ohm twin-lead cable (flat)

1. A 75-ohm system is generally a round cable with

F-type connector that can easily be attached to a

terminal without tools (not supplied).

2. A 300-ohm system is a flat “twin-lead” cable that

can be attached to a 75-ohm terminal through a

300/75-ohm ADAPTOR (not supplied).

36F630(05-06)

03.3.5, 2:38 PM

Dimension: 140mm x 215mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Antenna Connections (Continued)

OUTDOOR ANTENNA CONNECTION

• Refer to one of the following two diagrams when connecting to an outdoor antenna.

A: Using a VHF/UHF combination outdoor antenna.

B: Using separate VHF and/or UHF outdoor antenna.

• Connect an outdoor antenna cable lead-in to the ANT/CABLE terminal on the rear of the TV set.

A. Combination VHF/UHF Antennas

B. Separate VHF/UHF Antenna

REAR PANEL

VHF/UHF ANTENNA

300/75-ohm

ADAPTOR

(Not supplied)

VHF/UHF ANTENNA

300-ohm

twin-lead

VHF

UHF

ANTENNA ANTENNA

300-ohm

twin-lead

COMBINER

(not supplied)

75-ohm

coaxial cable

300-ohm

twin-lead

IN OUT

75-ohm coaxial

cable

REAR OF TV

NOTICE

F-type connector should be finger-tightened only.

F-type connector

When connecting the RF cable to theTV set, do not

tighten F-type connector with tools.

If tools are used, it may cause damage to your TV

set.

(The breaking of internal circuit, etc.)

75-ohm coaxial cable

CABLE TV (CATV) CONNECTION

• A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm

coaxial cable to the set, screw the 75 ohm cable to the COAXIAL CABLE CONNECTOR.

• Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay

channels are scrambled, a cableTV converter/descrambler is generally provided to the subscriber by

the cable TV company.This converter/descrambler is necessary for normal viewing of the scrambled

channels. (Set your TV on channel 3 or 4.Typically one of these channels is used. If this is unknown,

consult your cable TV company.) For more specific instructions on installing cable TV, consult your

cable TV company. One possible method of utilizing the converter/descrambler provided by your

cable TV company is explained below.

Please note: RF switch equipped with position A/B (not provided) is required.

“A” position on the RF switch (not supplied) : You can view all unscrambled channels using the TV’s

channel keys.

“B” position on the RF switch (not supplied) : You can view the scrambled channels via the converter/

descrambler using the converter’s channel keys.

RF switch (not supplied)

Two-set

signal

splitter

(not

OUT

Cable TV Line

OUT

supplied)

Cable TV converter/

descrambler

(not supplied)

Note:

• Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that

might be required.

36F630(05-06)

03.3.5, 2:38 PM

Dimension: 140mm x 215mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Quick Reference Control Operation

Part Names

Front Panel

•

VIDEO/AUDIO

TERMINALS

(INSIDE DOOR)

IN 2

POWER

–

VOL

PULL-OPEN

Press → On.

Press again → Off.

POWER

–

VOL

CHANNEL UP/DOWN

(a) Selects next higher channel.

(s) Selects next lower channel.

REMOTE CONTROL

SENSOR

VOLUME UP/DOWN

(k) Increases sound.

(l) Decreases sound.

Press → Accesses MAIN MENU.

Press again → Exits MAIN MENU.

Basic Remote Control Functions

POWER

Infrared Transmitter Window

Press → On.

CATV/DVD-TV/VCR MODE buttons

Press TV/VCR → Signals sent will be for

TV and VCR control.

Press CATV/DVD → Signals sent will be

for cable TV converter and DVD control.

Press again → Off.

REMOTE KEYPAD

Accesses any channel from keypad.

FLASHBACK

Returns to previous channel.

DISPLAY

PERSONAL PREFERENCE

With the Personal Preference buttons, you

can program your favorite programs by

using the 4 categories A, B, C and D. The

channels can be accessed quickly by using

these buttons. (See page 32.)

Press → Displays receiving channel for

4 seconds.

Press again → Removes display.

•

Temporarily displays receiving channel

when in Closed Caption mode.

INPUT

VOLUME UP/DOWN

Press → Switches to external video

INPUT 1 mode.

(k) Increases sound.

(l) Decreases sound.

Press twice → Switches to external video

INPUT 2 mode.

•

Changes or selects the TV

adjustments on On-Screen Display.

Press 3 times → Switches to external

video INPUT 3 mode or COMPONENT

mode.

Press → Accesses MAIN MENU.

Press again → Exits MAIN MENU.

Press 4 times → Switches back to the

original TV mode. See page 39.

ENTER

MUTE

Used in some instances where a Cable

Converter Box requires an “enter” command

after selecting channels, when using the

REMOTE KEYPAD button. (See page 41.)

CHANNEL UP/DOWN

Press → Mutes sound.

Press again → Restores sound.

•

When sound is muted, CLOSED

CAPTION appears if available.

POWER (DVD/VCR)

Press → On.

Press again → Off.

(a) Selects next higher channel.

(s) Selects next lower channel.

•

See pages 28–30 for Channel Setting.

Moves the “ E ” mark on the MENU

screens.

DVD/VCR CONTROL

See page 41.

SKIP/VCR-CH

(See page 41.)

REC

(See page 41.)

Note:

•

The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the

remote control, place it under a fluorescent light or other lighting.

•

The phosphorescent material contains no radioactive or toxic material, so it is safe to use.

The degree of illumination will vary depending on the strength of lighting used.

The degree of illumination will decrease with time and depending on the temperature.

The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.

Sunlight and fluorescent lighting are the most effective when charging the display.

36F630(07)

03.3.5, 2:39 PM

Dimension: 140mm x 215mm

Download from Www.Somanuals.com. All Manuals Search And Download.

EZ SETUP during First Use

POWER

When you turn on the TV for the first time, it will automatically

memorize the broadcasting channels.

•

Please perform the following instructions before pressing the

POWER button.

(1) Insert the batteries into the remote control. (See page 5)

(2) Connect the antenna cable to the TV set. (See pages 5, 6)

(3) Plug in the AC POWER cord to the wall outlet.

VOLUME

(

k)/(l)

CHANNEL

UP (a)/

DOWN (s)

1 Press the POWER button on the TV set or on the Remote Control

to turn on the TV. The SELECT LANGUAGE screen will be

displayed.

SELECT LANGUAGE

ENGL I SH

ESPAÑOL

FRANCA I S

(On the Remote Control)

(On the Set)

POWER

SELECT : CH

–

SET

: VOL

(SELECT LANGUAGE screen)

2 Press CH a/s to select “ENGLISH”, “ESPAÑOL (SPANISH)” or

SELECT LANGUAGE

“FRANCAIS (FRENCH)”.

ENGL I SH

ESPAÑOL

FRANCA I S

SELECT : CH

: VOL

–

SET

3 Press VOL k/l to access the EZ SETUP screen.

CONNECT ANTENNA OR CABLE.

START EZ SETUP?

STOP

START

(EZ SETUP screen)

(START)

4 Press VOL k.

PLEASE WA I T

AUTO PROGRAMMI NG

1 2 5

The tuner will automatically search for the

broadcasting and cable TV channels.(The CH No.

will automatically increase when it appears.)

STOP

START

(STOP)

If you want to stop the EZ SETUP process once it

has started, press VOL l and it will be canceled.

If you want to SET UP again, please refer to page

27 on SET UP.

To cancel EZ SETUP

Press VOL l.

5 Once EZ SETUP is complete, the lowest channel number

memorized will be displayed.

Note:

• If EZ SETUP does not memorize all the channels in your region, please refer to pages 28–30 for

more information on manually memorizing the channels using CHANNEL SETTING.

• It may be difficult to PRESET when the broadcast signals are weak, the channel cycle frequency is

incorrect or frequency jamming is occurring around the area. Please refer to pages 28–30 for more

information on manually memorizing the channels using CHANNEL SETTING.

36F630(08-09)

03.3.5, 2:55 PM

Dimension: 140mm x 215mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Demo Mode

• To learn more about the TV set, you can enter DEMO mode. Simply

press and hold MENU on the TV set for more than 3 seconds.

• To cancel DEMO mode, again press MENU on the TV set for more

than 3 seconds.

(On the Set)

Example:

DEMO mode display

button

Accessing the MAIN MENU screen without Remote Control

• If you misplaced your Remote Control you can still access most settings

via the MAIN MENU screen by pressing MENU on the TV set.

• Some features of your TV set are not accessible without the Remote

Control. If you lost your Remote Control, contact a Sharp Service

Center for a replacement.

(On the Set)

button

36F630(08-09)

03.3.5, 2:55 PM

Dimension: 140mm x 215mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Language

The language for the ON SCREEN DISPLAY can be set to ENGLISH, SPANISH or FRENCH.

•

1 Press MENU to access the MAIN MENU screen.

SLEEP

I MER

I DEO ADJ UST

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

(MAIN MENU screen)

2 Press CH a/s to move the “E” mark to “SET UP”.

SLEEP

I MER

I DEO ADJ UST

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

3 Press VOL k/l to access the SET UP screen, then press CH a/s

BLUE SCREEN

PERSONAL PREF.

UN I VERSAL PL US

L ANGUAGE

to move the “E” mark to “LANGUAGE”.

CH SETT I NG

AUTO I NPUT

CH I NPUT I D

→

SCREEN FORMAT

(SET UP screen)

LANGUAGE

4 Press VOL k/l to access the LANGUAGE select screen.

ENGL I SH

ESPAÑOL

FRANCA

(LANGUAGE select screen)

I D IOMA

5 Press CH a/s to select “ENGLISH”, “ESPAÑOL (SPANISH)” or

ENGL I SH

ESPAÑOL

“FRANCAIS (FRENCH)”.

FRANCA

6 Press MENU to exit.

Sleep Timer

You can preset your television to turn off automatically in increments of 30, 60, 90 or 120 minutes.

•

1 Press MENU to access the MAIN MENU screen.

SLEEP

I MER

I DEO ADJ UST

2 Press VOL k/l to access the SLEEP TIMER screen.

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

→

(MAIN MENU screen)

3 Press VOL k/l to set a sleep time of 30, 60, 90 or 120 minutes.

SLEEP

I MER

12 0M REMA I N

4 Press MENU to exit.

→

Note:

(SLEEP TIMER screen)

•

To turn off the SLEEP TIMER, repeat the above SLEEP TIMER steps and select “– – – M REMAIN” during step 3.

While SLEEP TIMER is active, the time remaining will be briefly displayed on-screen at regular intervals or when

the Remote’s DISPLAY key is pressed twice. 5 minutes before the SLEEP TIMER turns off the TV, the screen

prompts the time remaining for 4 seconds. The SLEEP TIMER shows a similar display for each remaining

minute and a 10-second display right before shutting off the TV.

•

If you turn the POWER OFF, the SLEEP TIMER will automatically reset.

36F630(10-11)

03.3.5, 2:55 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Video Adjust

Description of Adjustment Items

•

Selected item

VOL

button

VOL

button

PICTURE

TINT

To increase contrast

To decrease contrast

To make skin tones greenish

To increase color intensity

To increase brightness

To increase sharpness

To make skin tones purplish

To decrease color intensity

To decrease brightness

To decrease sharpness

VOLUME

)/(

COLOR

BRIGHT

SHARP

CHANNEL

UP (a)/

DOWN (s)

COLOR TEMP.

RESET

To choose a LOW, ML, MH or HIGH color tone.

To return all adjustments to factory preset levels.

SLEEP T I MER

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s to move the “E” mark to “VIDEO ADJUST”.

V I DEO ADJ UST

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

→

(MAIN MENU screen)

3 Press VOL k/l to access the PICTURE adjust screen.

P I CTURE

(PICTURE adjust screen)

4 Press CH a/s to select the desired adjustment item.(Refer to the

diagram below.)

TINT

COLOR

BRIGHT

PICTURE

COLOR TEMP.

: CH s

SHARP

RESET

: CH a

5 Press VOL k/l to adjust the setting.

P I CTURE

VOL k

increases contrast

VOL l

decreases contrast

6 Repeat steps 4 to 5 to adjust other settings.

7 Press MENU to exit.

Note:

• VIDEO ADJUST setting, once set, is shared among AIR/CABLE, INPUT 1, INPUT 2, and INPUT 3

modes.

• VIDEO ADJUST setting for INPUT 3 when used as COMPONENT can be set independently.

36F630(10-11)

03.3.5, 2:55 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Audio Select

H MTS (Multichannel TV Sound)

This function allows reception of stereo or bilingual TV sound.

You can enjoy Hi-Fi stereo sound or SAP broadcasts where available.

•

Stereo broadcasts

Live television broadcasts of sports, shows, concerts, etc. can be received in dynamic stereo sound.

SAP broadcasts

Television broadcast can be received with either MAIN or SAP sound.

MAIN sound: The normal program soundtrack. (Monaural or stereo where available.)

SAP sound: Second language, supplementary commentaries, etc. (SAP sound is monaural.)

If stereo sound is difficult to hear;

You can obtain clearer sound by manually switching to the fixed monaural mode.

•

H EQUISOUND

This function keeps volume level constant during program changes and commercial breaks.

To use this function, turn EQUISOUND to “ON”.

H SPEAKER (Internal Speaker Switch)

This function turns the TV’s internal speakers “ON” or “OFF” when listening to sound from

external speakers by using the AUDIO OUTPUT Terminals. (See page 40.)

H FAO (Fixed Audio Output)

This function turns the TV’s internal speakers “OFF” and allows fixed audio output from the

AUDIO OUTPUT Terminals. (See page 40.) With FAO, the TV’s volume control is disabled.

(SOUND RETRIEVAL SYSTEM)

In“STEREO”mode, this function restores the audio’s three dimensional quality so that stereo

sound is closer to a live performance. In the“SIMULATE”mode, this function adjusts monaural

sound to simulate a more open, stereo-like quality.

1 Press MENU to access the MAIN MENU screen.

SLEEP T I MER

2 Press CH a/s to move the “E” mark to “AUDIO SELECT”.

V I DEO ADJ UST

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

→

(MAIN MENU screen)

3 Press VOL k/l to access the AUDIO SELECT screen.

AUD I O SELECT

4 Press CH a/s to move the “E” mark to “MTS”, “EQUISOUND”,

MTS

: STEREO

: OFF

EQU I SOUND

SPEAKER

FAO

: ON

“SPEAKER”, “FAO”, “SURROUND” or “AUDIO ADJUST”.

: OFF

SURROUND

AUD I O AD JUST

: OFF

→

(AUDIO SELECT screen)

36F630(12-13)

03.3.5, 2:56 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Audio Select (Continued)

5 Press VOL k/l to select “STEREO”, “SAP” or “MONO”when the

AUD I O SELECT

“E” mark is at “MTS”.

MTS

: STEREO

EQU I SOUND

SPEAKER

: OFF

: ON

FAO

: OFF

SURROUND

AUD I O AD JUST

MTS EQUISOUND SPEAKER

FAO

SURROUND

OFF

STEREO

SAP

OFF

SRS

(AUDIO SELECT screen)

MONO

SIMULATE

H AUDIO ADJUST

When the “E” mark is at “AUDIO ADJUST”, press VOL k/l to

access the AUDIO ADJUST screen. To access the desired item,

press CH a/s.To adjust the audio setting, press VOL k/l.

TREBLE

BASS

BALANCE

RESET

Selected item VOL k button

VOL l button

TREBLE

To increase treble response.

To decrease treble response.

BASS

To increase bass response.

To decrease bass response.

BALANCE

To emphasize the right

speaker’s volume.

To emphasize the left

speaker’s volume.

TREBLE

RESET

To return all adjustments to factory preset levels.

6 Press MENU to exit.

An example screen displaying ON AIR when receiving stereo broadcasts

Current channel number

“← ON AIR” will appear next to STEREO or

SAP when receiving STEREO or SAP

broadcasts.

STEREO

SAP

ON A I R

MONO

(CHANNEL call on screen)

Note:

•

symbol is a trademark of SRS Labs, Inc. SRS technology is incorporated under license

from SRS Labs, Inc.

• Once MONO mode is selected, the TV sound remains monaural even if the TV set receives a stereo

broadcast.You must switch the mode back to STEREO if you want to hear stereo sound again.

• Selecting MTS while receiving video signals from INPUT terminals does not change the type of

sound; in this case, sound is determined by the video source.

• If “FAO” mode is on, “SPEAKER” mode will automatically turn off. Changing “SPEAKER” setting will

not affect “FAO” mode.

36F630(12-13)

03.3.5, 2:56 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Closed Caption

How to set CLOSED CAPTION

•

• YourTV is equipped with an internal Closed Caption decoder.“Closed

Caption”is a system which allows conversations, narration, and sound

effects inTV programs and home videos to appear as captions on the

TV screen (see the illustration).

• Not all the programs and videos will offer closed captioning. Please

look for the “

” symbol to ensure that captions will be shown.

• Closed Caption broadcast can be viewed in two modes: CAPTION

andTEXT. For each mode, two channels are available, CH1 and CH2.

VOLUME

)/(

The CAPTION mode shows subscripts of dialogs and commentaries

of TV dramas and news programs while allowing clear view of the

picture.

The TEXT mode displays over the picture other various information

(such as TV program schedule, weather forecast, etc.) that is

independent of the TV programs.

(

CHANNEL

UP (a)/

DOWN (s)

SLEEP T I MER

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s to move the “E” mark to “CLOSED CAPTION”.

V I DEO ADJ UST

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

→

(MAIN MENU screen)

CLOSED CAPT I ON

3 Press VOL k/l to access the CLOSED CAPTION setting screen.

MODE

DATA

: CAPT I ON

: CH

(CLOSED CAPTION setting screen)

CLOSED CAPT I ON

4 Press CH a/s to move the “E” mark to either “MODE” or “DATA”.

MODE

DATA

: CAPT I ON

: CH

5 Press VOL k/l to change the CLOSED CAPTION setting.

CLOSED CAPT I ON

MODE

DATA

: CAPT I ON

: CH

CH 1

DATA :

CAPTION

MODE :

CH 2

TEXT

OFF

6 Press MENU to exit.

Note:

• If a broadcast contains CLOSED CAPTION and the MUTE button is pressed, the set enters CAPTION

mode automatically. Pressing MUTE again will return the set to its previous condition.

• Closed Caption may malfunction (white blocks, strange characters, etc.) if signal conditions are poor

or if there are problems at the broadcast source. This does not necessarily indicate a problem with

your TV.

• If any button is pressed to call up the ON SCREEN DISPLAY while viewing a CLOSED CAPTION

broadcast, the closed captions will disappear momentarily.

• If no TEXT broadcast is being received while viewing in the TEXT mode, the screen may become

dark and blank for some programs. Should this occur, switch the Closed Caption mode to “OFF”.

36F630(14-18)

03.3.5, 2:57 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Parent Control (V-CHIP Operation)

H V-CHIP

• This function allows you to restrict TV programs and also allows you to control TV usage based on

FCC data. This function is to prevent your children from watching violence or sexual scenes that may

be harmful.

• Restriction ofTV programs includes two characters that contain information about the program’s MPAA

rating and theTV Parental Guidelines. MPAA is restricted by age.TV Parental Guidelines are restricted

by age and contents.

• Since a TV program may use either the MPAA rating or the TV Guidelines you should adjust both for

complete control.

[1] MPAA RATING

RATING

GENERAL AUDIENCES. All ages admitted.

PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for

children.

age

PG-13

PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for

children under 13.

based

RESTRICTED. Under 17 requires accompanying parent or adult guardian.

NO ONE 17 AND UNDER ADMITTED.

NC-17

X Rating is an older rating that is unified with NC-17 but may be encoded on

older movie’s data.Note:

• MPAA RATING

Example 2:

Example 1:

“R” in the age-based rating is blocked, this will

automatically block the higher rating “NC-17”, “X”

also.

“PG-13” in the age-based rating is blocked, this

will automatically block the higher ratings “R”,

“NC-17”, “X” also.

1. User setting

2. Block table

1. User setting

2. Block table

not to

–––––

block

not to

–––––

block

not to

block

Select

block

PG-13 –––––

BLOCK

PG-13 BLOCK

BLOCK

NC-17 BLOCK

PG-13

age

based

age

based

Select

auto-

block

auto-

block

auto-

block

NC-17 BLOCK

BLOCK

NC-17

auto-

BLOCK

block

Note:

• MPAA RATING is only age-based.

[2] TV PARENTAL GUIDELINES

content based

AGE

RATING

(Sexually

(Adult

(Sexual (Violence) (Fantasy

Suggestive Language) Situation)

Dialog)

Violence)

–

TV-Y (All children)

TV-Y7 (Direct to Older Children)

TV-G (General Audience)

–

age

based

TV-PG (Parental Guidance

Suggested)

TV-14 (Parents Strongly

Cautioned)

–

TV-MA (Mature Audience Only)

: Content Rating can be set.

: Content Rating cannot be set (not normally broadcast by TV station).

–

36F630(14-18)

03.3.5, 2:57 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Parent Control (V-CHIP Operation) (Continued)

• TV PARENTAL GUIDELINES (Example)

AGE

–

TV–Y

: V I EW

TV–Y7

TV–G

: BLOCK

Example 1.1 : Age Based setting

–

TV–PG

TV– 1 4

TV–MA

Clear s (block) from each "AGE" box for all ratings.

–

This will automatically unblock everything.

MENU : RETURN

Example 1.2 : Age Based setting

AGE

–

TV–Y

: V I EW

For “TV-G” put a

in the "AGE" box. This will automatically block the

TV–Y7

TV–G

–

V : BLOCK

–

higher age ratings “TV-PG”, “TV-14” and “TV-MA” as well as “TV-G”.

Please note the content ratings“D”, “L”, “S”, “V”are automatically blocked

as well.

TV–PG

TV– 1 4

TV–MA

MENU : RETURN

Example 2.1 : Content Based setting

If you choose to unblock every content-based items (“D”, “L”, “S”, “V”),

AGE

–

TV–Y

: V I EW

: BLOCK

TV–Y7

TV–G

–

clear the

MA”.

(block) from each “AGE” box of “TV-PG”, “TV-14” and “TV-

TV–PG

TV– 1 4

TV–MA

–

MENU : RETURN

Example 2.2 : Content Based setting

AGE

–

TV–Y

: V I EW

TV–Y7

TV–G

–

V : BLOCK

Put a

in the box corresponding to “TV-PG” (row) and “V (Violence)”

–

TV–PG

TV– 1 4

TV–MA

(column). This will automatically block the “V” boxes for “TV-14” and

“TV-MA”. Setting only “TV-PG-V”, “TV-14-V” or “TV-MA-V” will not block

all programs rated “TV-PG”, “TV-14” or “TV-MA”.

–

MENU : RETURN

Example 3 : Resetting an Age Based setting

AGE

–

TV–Y

: V I EW

For “TV-14”, put a

(block) in the “AGE” box.

TV–Y7

TV–G

V : BLOCK

–

This will again automatically block the content ratings “D”, “L”, “S”, “V”

for “TV-MA” as well as “TV-14” (“D” is not available for “TV-MA”).

Please note that the lower age rating “TV-PG” does not change from its

previous settings after this.

TV–PG

TV– 1 4

TV–MA

–

MENU : RETURN

Note:

• Content ratings can be modified but only in the combinations indicated by

in the table on page 15.

• Changing a lower age rating’s content setting to “BLOCK” automatically changes the same higher age

rating’s content setting to “BLOCK” regardless of their previous settings.

• Changing a lower rating’s “AGE” setting to“BLOCK” automatically changes all higher ratings to “BLOCK”

regardless of their previous settings.

• For “TV-Y7”, “TV-PG”, “TV-14” and “TV-MA”, if you clear the

change settings based on content.

in the “AGE” box (unblock) you can still

• Clearing a higher rating’s age or content setting will not clear lower settings. Make sure that all undesired

boxes are blocked.

[3] ADDITIONAL MODE

Besides “MPAA RATINGS” and “TV PARENTAL GUIDELINES”, new ratings system’s data can be

downloaded when they become available. (See page 19.)

36F630(14-18)

03.3.5, 2:58 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Parent Control (V-CHIP Operation) (Continued)

How to set V-CHIP

[1] MPAA RATING

•

VOLUME

)/(

(

CHANNEL

UP (a)/

DOWN (b)

SLEEP T I MER

1 Press MENU to access the MAIN MENU screen.

V I DEO ADJ UST

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

(MAIN MENU screen)

2 Press CH a/s to move the “E” mark to “PARENT CONTROL”.

SLEEP T I MER

V I DEO ADJ UST

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

PARENT CONTROL

3 Press VOL k/l to access the PARENT CONTROL screen.

V–CH I P BLOCK

V I EW T I MER

(PARENT CONTROL screen)

4 Press VOL k/l to access the V-CHIP select screen.

MPAA

TV GU I DEL I NES

Note:

• If SECRET No. is already set, enter the SECRET No.

DOWNLOAD : OFF

STATUS

: OFF

(See

To change the V-CHIP BLOCK after

•

registering a secret No. on page 22.).

(V-CHIP select screen)

5 Press VOL k/l to select “MPAA”. Press CH a/s to move the

“E” mark to “PG”, then press VOL k/l to select BLOCK. If you

set “PG”to BLOCK, “PG-13”, “R”, “NC-17”and“X”are automatically

: – – – – –

: BLOCK

PG– 1 3

NC– 1 7

blocked.

MENU : RETURN

→

6 Press MENU to return to the V-CHIP select screen.

36F630(14-18)

03.3.5, 2:58 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Parent Control (V-CHIP Operation) (Continued)

7 Press MENU, then “INPUT SECRET No.” will be displayed.

I NPUT SECRET No .

Note:

–

• If SECRET No. is already set, skip to step 9.

8 Enter a 4-digit SECRET No. using the REMOTE KEYPAD.

I NPUT SECRET No .

ENTER

100

When done, press MENU to exit.

Note:

• If you set “G” to BLOCK , all ratings are automatically blocked.

• If you set “X” to BLOCK, “G”, “PG”, “PG-13”, “R” and “NC-17” are not blocked.

[2] TV GUIDELINES

MPAA

TV GU I DEL I NES

1 Repeat steps 1 to 4 of [1] MPAA RATING.

2 Press CH a/s to move the “E” mark to “TV GUIDELINES”.

DOWNLOAD : OFF

STATUS

: OFF

(V-CHIP select screen)

3 Press VOL k/l to access the TV GUIDELINES screen.

AGE

–

TV–Y

: V I EW

TV–Y7

TV–G

: BLOCK

–

TV–PG

TV– 1 4

TV–MA

4 To change AGE and CONTENT SETTING, press CH a/s to move

–

the “E” mark to the desired rating and then press VOL k/l to

MENU : RETURN

select.

(TV GUIDELINES screen)

→

5 Press CH a/s to move the “E” mark to the desired content item

TV –Y7

AGE

BLOCK

– – – – –

BLOCK

and then press VOL k/l to select either “BLOCK” or “– – – – –”

(unblock).

→

MENU : RETURN

(CONTENT RATING screen)

6 Press MENU to return to the TV GUIDELINES screen.

7 Repeat steps 4 to 6 until all ratings and their contents are set.

AGE

–

TV–Y

: V I EW

TV–Y7

TV–G

–

V : BLOCK

–

TV–PG

TV– 1 4

TV–MA

–

When done, press MENU to return to V-CHIP selct screen.

MENU : RETURN

9 Press MENU to exit.

Note:

• If SECRET No. is not set, enter a SECRET No. as show in steps 7 and 8 of [1] MPAA RATING.

36F630(14-18)

03.3.5, 2:58 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Parent Control (V-CHIP Operation)C(Conotnintiuneude)d)

[3] Downloading additional rating mode

REMOTE

KEYPAD

There will be an additional new rating system. In that case,

please set up as follows. Subsequently the new rating system

will set up automatically.

VOLUME

(k)/(l)

CHANNEL

UP (a)/

DOWN (s)

1 Repeat steps 1 to 4 of [1] MPAA RATING.

2 Press CH a/s to move the “E” mark to “DOWNLOAD”.

MPAA

TV GU I DEL I NES

DOWNLOAD : OFF

STATUS

: OFF

3 Press VOL k/l to select “DOWNLOAD : ON”.

MPAA

TV GU I DEL I NES

DOWNLOAD : ON

STATUS

: OFF

4 Press MENU, then “INPUT SECRET No.” will be displayed.

I NPUT SECRET No .

Note:

–

• If SECRET No. is already set, skip to step 6.

5 Enter a 4-digit SECRET No. using the REMOTE KEYPAD.

I NPUT SECRET No .

ENTER

100

6 Press MENU to exit.

Downloading V-CHIP data

•

1 If you watch a program containing “new rating system data”, the

PLEASE WA I T

DOWNLOAD screen will be displayed.

NOW DOWNLOADI NG

V–CH I P DATA

(DOWNLOAD screen)

2 The DOWNLOAD screen will disappear once downloading is finished.

Note:

• DOWNLOAD will not start, if you are not watching a program containing “new rating system data”.

36F630(19-22)

03.3.5, 2:59 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Parent Control (V-CHIP Operation) (Continued)

How to set additional rating mode (Example)

Once downloading is complete, you can set the blocking pattern as follows.

•

1 Repeat steps 1 to 4 of [1] MPAA RATING.

MPAA

TV GU I DEL I NES

Cd n

En g

s h Ra

n g s

2 Press CH a/s to move the “E” mark to “Cdn. English Ratings”,

F r e n c h Ra

n g s

then press VOL k/l.

DOWNLOAD : ON

STATUS

: ON

→

(After downloading the

rating data)

3 You can select “BLOCK” or “– – – – –” (unblock) for each rating

: – – – – –

: BLOCK

: – – – – –

: BLOCK

: – – – – –

: BLOCK

C8 +

item by pressing CH a/s and VOL k/l.

1 4 +

1 8 +

I ND I V I DUAL BLOCK

MENU : RETURN

→

(ENGLISH INDIVIDUAL

BLOCK screen)

4 You can select “BLOCK” or “– – – – –” (unblock) for each rating

: – – – – –

: BLOCK

: – – – – –

: BLOCK

: – – – – –

8 +

item by pressing CH a/s and VOL k/l if you select “Cdn. French

1 3 +

1 6 +

1 8 +

Ratings” in step 2.

I ND I V I DUAL BLOCK

MENU : RETURN

→

(FRENCH INDIVIDUAL

BLOCK screen)

Note:

• You are able to download up to 4 different rating systems.

36F630(19-22)

03.3.5, 2:59 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Parent Control (V-CHIP Operation) (Continued)

Activating the V-CHIP BLOCK

•

1 Repeat steps 1 to 4 of [1] MPAA RATING.

2 Press CH a/s to move the “E” mark to “STATUS”. Press VOL

MPAA

TV GU I DEL I NES

k/l to activate the V-CHIP BLOCK. (If STATUS is OFF, V-CHIP

BLOCK will not operate.)

DOWNLOAD : OFF

STATUS

: ON

→

3 Press MENU, then “INPUT SECRET No.” will be displayed.

I NPUT SECRET No .

Note:

–

•

If SECRET No. is already set, skip to step 5.

4 Enter a 4-digit SECRET No. using the REMOTE KEYPAD.

I NPUT SECRET No .

ENTER

100

5 Press MENU and the SECRET No. will be registered.

To temporarily cancel the V-CHIP BLOCK

•

1 “V-CHIP HAS BEEN ACTIVATED” appears if you view a program

with the same program rating data you configured.

V–CH I P HAS BEEN ACT I VATED

TV–Y7

Note:

• “V-CHIP HAS BEEN ACTIVATED” will not be displayed if STATUS is not configured to “ON”.

2 Press MENU, then “INPUT SECRET No.” will be displayed.

I NPUT SECRET No .

–

3 Enter the 4-digit SECRET No. using the REMOTE KEYPAD, then

V-CHIP BLOCK temporarily will be canceled.If the wrong SECRET

No. is chosen, “SECRET No. IS INCORRECT” will be displayed.

Input the SECRET No. again in this case.

I NPUT SECRET No .

ENTER

Note:

100

• If you turn the Power ON from OFF, the V-CHIP BLOCK will be activated again.

36F630(19-22)

03.3.5, 2:59 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Parent Control (V-CHIP Operation) (Continued)

To change the V-CHIP BLOCK after registering a secret No.

•

1 Repeat steps 1 to 4 of [1] MPAA RATING, then “INPUT SECRET

No.” will be displayed.

I NPUT SECRET No .

–

2 Enter the 4-digit secret No. using the REMOTE KEYPAD and

theV-CHIP select screen will be displayed.SetV-CHIP BLOCK

again.

I NPUT SECRET No .

ENTER

100

If you forget or need to change your Secret No., clear the original Secret No. and set

up a new one.

•

1 Repeat steps 1 to 4 of [1] MPAA RATING, or 1 to 2 of To

temporarily cancel the V-CHIP BLOCK, then “INPUT SECRET

No.” will be displayed.

(On the Set)

2 Press and hold both VOL k and CH a on the TV set

simultaneously until the message “INPUT SECRET No.”

disappears.

VOL +

VOL k and CH a

buttons

3 Press the MENU button twice to exit.

36F630(19-22)

03.3.5, 2:59 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Parent Control (VIEW TIMER)

H VIEW TIMER

This function allows you to restrict TV viewing time and also allows you to controlTV usage.

This function is to prevent your children from watching too much TV.

VIEWING TIME (an accumulative timer: counts only the time

duration while the TV power is on.)

• VIEWING TIME can be set from 30M (30 minutes) to 10H00M (10

V I EW

I MER

hours) in 30 minutes intervals.

V I EWI NG

––H ––M

OFF I ME

––H ––M

STATUS : OFF

I ME

OFFTIME (RestrictsTV viewing after the VIEWINGTIME reaches

zero.)

• OFF TIME can be set from 30M (30 minutes) to 10H00M (10 hours)

in 30 minutes intervals.

STATUS (Select ON to activate VIEW TIMER)

How to set VIEW TIMER

•

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s to move the “E” mark to “PARENT CONTROL”.

SLEEP

I MER

I DEO ADJ UST

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

→

(MAIN MENU screen)

PARENT CONTROL

3 Press VOL k/l to access the PARENT CONTROL screen.

4 Press CH a/s to move the “E” mark to “VIEW TIMER”.

V–CH I P BLOCK

V I EW T IMER

→

(PARENT CONTROL screen)

V I EW

I MER

5 Press VOL k/l to access “VIEW TIMER”.

V I EWI NG

––H ––M

OFF I ME

––H ––M

STATUS : OFF

I ME

6 Press CH a/s to select “VIEWING TIME” and “OFF TIME”. For

V I EW T I MER

each selection, press the VOL k/l to set the time duration.

V I EWI NG T I ME

2H 0 0M

OFF T I ME

––H ––M

STATUS : OFF

→

V I EW T I MER

7 Press CH a/s to select “STATUS”. Press the VOL k/l to turn

V I EWI NG T I ME

2H 0 0M

ON the “VIEW TIMER”. (If STATUS is OFF, VIEW TIMER will not

OFF T I ME

5H 0 0M

operate.)

STATUS : ON

→

8 Press MENU. “INPUT SECRET No.” will be displayed.

I NPUT SECRET No .

Note:

–

• If SECRET No. is already set, skip to step 10.

36F630(23-26)

03.3.5, 2:59 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Parent Control (VIEW TIMER) (Continued)

9 Enter a 4-digit SECRET No. using the REMOTE KEYPAD.

10 Press MENU to exit.

NPUT SECRET No .

ENTER

100

→

Example:

I EW

I MER

• To restrict anybody from watching the TV for more than 5 hours, after

watching the TV for 2 hours, your settings would look like the one on the

right.

I EWI NG

I ME

2H 0 0M

I ME

5H 0 0M

OFF

STATUS : ON

• You can choose to watch the 2 hours of TV as you wish. For example, you

could watch 1 hour of TV, turn TV off for 30 minutes, then turn the TV on

and watch the remaining 1 hour of the VIEWING TIME.

To change the VIEW TIMER setting after registering a secret No.

•

NPUT SECRET No .

1 Repeat steps 1 to 4 of How to setVIEWTIMER.Press

VOL k/l, and “INPUT SECRET No.” will be

displayed.

–

2 Enter the 4-digit SECRET No. using the REMOTE

KEYPAD, and the VIEW TIMER access screen will

be displayed. Repeat steps 5, 6.

NPUT SECRET No .

ENTER

100

Note:

SECRET No .

I NCORRECT

• When you choose the correct SECRET No., the VIEW TIMER access

screen is displayed.If the wrong SECRET No. is chosen, “SECRET No. IS

INCORRECT” is displayed. Input the SECRET No. again in this case.

To cancel the VIEW TIMER (While the TV set is OFF but the VIEW

TIMER is set.)

•

I ME OVER

NPUT SECRET No .

1 Turn on the TV; a blue screen message “TIME OVER” will appear. If

–

you do nothing, the TV will turn off in approximately 30 seconds.

2 Enter the 4-digit SECRET No. using the REMOTE

I ME OVER

KEYPAD.When you choose the correct SECRET No.,

NPUT SECRET No .

the VIEW TIMER is canceled. If the wrong SECRET

No. is chosen, “SECRET No. IS INCORRECT” is

displayed. Input the SECRET No. again in this case.

ENTER

100

36F630(23-26)

03.3.5, 3:00 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Parent Control (VIEW TIMER) (Continued)

To cancel the VIEW TIMER setting or change the secret No. (if

you forget the SECRET No.)

•

1 Repeat steps 1 to 4 of How to setVIEWTIMER. Press VOL k/l,

and “INPUT SECRET No.” will be displayed.

I NPUT SECRET No .

–

2 Press and hold both VOL k and CH a on the TV set

simultaneously until theVIEWTIMER access screen is displayed.

Now you can cancel the VIEW TIMER settings or change the

SECRET No. while “INPUT SECRET No.” is displayed.

(On the Set)

VOL +

VOL k and CH a

buttons

Notice of Remaining VIEWING TIME

•

VIEWING TIME

0H 30M REMAIN

• For every 30 minute interval, the remaining time will be displayed for

4 seconds. For the last 5 minutes, the remaining time will be displayed

every minute.

• “0 REMAIN” will be displayed for 10 seconds just before theVIEWING

TIME expires.

VIEWING TIME

0H 05M REMAIN

VIEWING TIME

REMAIN

36F630(23-26)

03.3.5, 3:00 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Energy Save

This feature lets you lower the power consumption of your TV

set which in turn saves you money and minimizes the impact on

the environment. When this feature is turned on, it reduces the

brightness of the TV to a level that consumes approximately 20

percent less energy than when the feature is turned off.

The reduction in brightness will be less noticeable under low

room lighting conditions.

VOLUME

)/(

•

CHANNEL

UP ( )/

DOWN (s)

1 Press MENU to access the MAIN MENU screen.

SLEEP T I MER

2 Press CH a/s to move the “E” mark to “ENERGY SAVE”.

V I DEO ADJ UST

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

→

(MAIN MENU screen)

3 Press VOL k/l to access the ENERGY SAVE select screen.

ENERGY SAVE : OFF

(ENERGY SAVE select screen)

4 Press VOL k/l to select “ON”.

ENERGY SAVE : ON

5 Press MENU to exit.

36F630(23-26)

03.3.5, 3:00 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up

H EZ Setup

By operating the channel preset functions, you can preset your

TV to the desired channels for viewing.

VOLUME

)/(

(

CHANNEL

UP ( )/

DOWN (

1 Press MENU to access the MAIN MENU screen.

SLEEP T I MER

2 Press CH a/s to move the “E” mark to “SET UP”.

V I DEO ADJ UST

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

→

(MAIN MENU screen)

SET UP

3 Press VOL k/l to access the SET UP screen, then press

BLUE SCREEN

PERSONAL PREF.

UN I VERSAL PL US

L ANGUAGE

CH a/s to move the “E” mark to “CH SETTING”.

CH SETT I NG

AUTO I NPUT

CH / I NPUT I D

SCREEN FORMAT

→

(SET UP screen)

CH SETT I NG

4 Press VOL k/l to access the CH SETTING screen.

EZ SETUP

A I R / CABLE

CH SEARCH

CH MEMORY

(CH SETTING screen)

5 Press VOL k/l to access the EZ SETUP screen.

CONNECT ANTENNA OR CABLE.

START EZ SETUP?

STOP

START

(EZ SETUP screen)

6 Press VOL k.

(START)

PLEASE WA I T

AUTO PROGRAMMI NG

1 2 5

The tuner will automatically search for the

broadcasting and cable TV channels. (The CH No.

will automatically increase when it appears.)

STOP

START

(STOP)

If you want to stop the EZ SETUP process once it

has started, press VOL l. Search will be canceled.

To cancel EZ SETUP

Press VOL l.

7 Once EZ SETUP is complete, the lowest channel number

memorized will be displayed.

36F630(27-29)

03.3.5, 3:00 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up (Continued)

H Channel Setting

If EZ SETUP does not memorize all the channels in your region, follow the instructions below

to manually memorize the channel.

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s to move the “E” mark to “SET UP”.

SLEEP T I MER

V I DEO ADJ UST

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

→

(MAIN MENU screen)

3 Press VOL k/lto access the SET UP screen.

SET UP

BLUE SCREEN

4 Press CH a/s to move the “E” mark to “CH SETTING”.

PERSONAL PREF.

UN I VERSAL PL US

L ANGUAGE

CH SETT I NG

AUTO I NPUT

CH / I NPUT I D

SCREEN FORMAT

→

(SET UP screen)

5 Press VOL k/l to access the CH SETTING screen.

CH SETT I NG

EZ SETUP

A I R / CABLE

CH SEARCH

CH MEMORY

(CH SETTING screen)

6 Press CH a/s to move the “E” mark to “AIR/CABLE”, then press

CH SETT I NG

VOL k/l to access the AIR/CABLE screen.

EZ SETUP

A I R / CABLE

CH SEARCH

CH MEMORY

→

7 Press CH a/s to move the “E” mark to the desired mode.

A I R / CABLE

A I R

CABLE STD

CABLE HRC

CABLE I RC

CABLE STD

CABLE HRC

CABLE IRC

AIR

(AIR/CABLE screen)

8 Press MENU to exit.

Note:

• Receivable channels of your TV set are:

AIR channels:

CABLE channels:

VHF: 2 through 13.

1 (HRC and IRC mode only)

UHF: 14 through 69.

2 through 125 (STD, HRC and IRC)

36F630(27-29)

03.3.5, 3:00 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up (Continued)

Saving broadcast TV channels into memory

•

CH SETT I NG

1 Press MENU to access the MAIN MENU

screen, then press CH a/s to move the “E”

mark to “SET UP”.

EZ SETUP

A I R / CABLE

CH SEARCH

CH MEMORY

→

2 Press VOL k/l to access the SET UP

screen, then press CH a/s to move the “E”

mark to “CH SETTING”.

→

(CH SETTING screen)

3 Press VOL k/l to access the CH SETTING

screen.

4 Press CH a/s to move the “E” mark to “CH

SEARCH”, then press VOL k/l to access

the CH SEARCH screen.

CH SEARCH

A I R 1 0

→

STOP

START

To start:

(START)

Press VOL k. The tuner will search through

all available channels in your area and add

them into the TV memory.

(CH SEARCH screen)

To stop:

(STOP)

Press VOL l. CH SEARCH will stop at the

current channel and will not add any higher

channels.

5 Press MENU to exit.

Note:

• If you press VOL k again while in the CH SEARCH mode, auto-

program will start again, and the previously memorized channels will

be lost.

Adding weak or additional channels or erasing unwanted channels fromTV memory

•

1 Press MENU to access the MAIN MENU

screen, then press CH a/s to move the “E”

mark to “SET UP”.

CH SETT I NG

EZ SETUP

A I R / CABLE

CH SEARCH

CH MEMORY

→

2 Press VOL k/l to access the SET UP

screen, then press CH a/s to move the “E”

mark to “CH SETTING”.

(CH SETTING screen)

3 Press VOL k/l to access the CH SETTING

screen, then press CH a/s to move the “E”

mark to “CH MEMORY”.

→

4 Press VOL k/l to access CH MEMORY.

5 Use CH a/s or REMOTE KEYPAD to select

each desired channel to add or erase.

ENTER

100

36F630(27-29)

03.3.5, 3:01 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up (Continued)

6 Press VOL k to add a channel to the TV

memory or press VOL l to erase a channel

from the TV memory.

VOL k

To add channel 10 to

VOLUME

)/(

CH MEMORY

the TV memory

(

I R 1 0

ERASE

ADD

ERASE

ADD

VOL l

To erase channel 10 from

the TV memory

CHANNEL

UP ( )/

(CH MEMORY

unmemorized channel)

(CH MEMORY

memorized channel)

DOWN (s)

7 Press MENU to exit.

H BLUE SCREEN

Automatically turns the screen blue if a broadcast signal is not

received. After 15 minutes of non-reception, the TV will turn off

automatically.

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s to move the “E” mark to “SET UP”.

SLEEP

I MER

I DEO ADJ UST

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

→

(MAIN MENU screen)

3 Press VOL k/l to access the SET UP screen.

SET UP

BLUE SCREEN

PERSONAL PREF.

UN I VERSAL PL US

L ANGUAGE

CH SETT I NG

AUTO I NPUT

CH / I NPUT I D

SCREEN FORMAT

(SET UP screen)

4 Press VOL k/l to access the BLUE SCREEN select screen.

BLUE SCREEN : OFF

(BLUE SCREEN select screen)

5 Press VOL k/l to select “ON”.

BLUE SCREEN : ON

36F630(30-37)

03.3.5, 3:03 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up (Continued)

6 Press MENU to exit.

When the BLUE SCREEN is set to “ON”

Power turns off

automatically

No signal

Blue screen

after 15

minutes

Standby mode

Note:

• Poor reception due to weak signals, or too much noise might activate the BLUE SCREEN function

despite the presence of a broadcast signal. To continue watching TV under these conditions, switch

the BLUE SCREEN “OFF”.

• While INPUT1, 2 or 3 (COMPONENT) is selected, the BLUE SCREEN will not be shown even if

BLUE SCREEN is turned on.

36F630(30-37)

03.3.5, 3:03 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up (Continued)

H Personal Preference

REMOTE

KEYPAD

By setting PERSONAL PREFERENCE channels in advance, you

can select your favorite channels easily.

VOLUME

PERSONAL

PREFERENCE

(k)/(l)

CHANNEL

UP ( )/

DOWN (s)

SLEEP T I MER

1 Press MENU to access the MAIN MENU screen.

2 Press CH a/s to move the “E” mark to “SET UP”.

V I DEO ADJ UST

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

→

(MAIN MENU screen)

SET UP

3 Press VOL k/l to access the SET UP screen, then press

BLUE SCREEN

PERSONAL PREF.

UN I VERSAL PL US

L ANGUAGE

CH a/s to move the “E” mark to “PERSONAL PREF.”.

CH SETT I NG

AUTO I NPUT

→

CH / I NPUT I D

SCREEN FORMAT

(SET UP screen)

PERSONAL PREF.

4 Press VOL k/l to access the PERSONAL PREFERENCE select

screen in which you can program 4 favorite channels, in 4 different

categories. (total of 16 channels)

<A>

– – – – – – – – – – – –

(PERSONAL PREFERENCE select screen)

PERSONAL PREF.

5 Press VOL k/l and CH a/s to move the “E” mark to the desired

<A>

position.

– – – – – – – – – – – –

and

6 Press REMOTE KEYPAD on the Remote to input the CHANNEL

Number into the memory.

PERSONAL PREF.

<A>

1 2 5 – – – – – – – – –

– – – – – – – – – – – –

Press INPUT on the Remote to register the INPUT mode into the

memory.

Example: 125 — Press “100” followed by “2” and then “5”.

25 — Press “2” and then “5”.

ENTER

100

— Press “0” and then “4”.

To reset a registered CHANNEL Number, input “0” twice.

7 Repeat steps 5 and 6 to register the next CHANNEL Number or INPUT mode.

8 Press MENU to exit.

To select the PERSONAL PREFERENCE channel.

PERSONAL PREF.

If the channels are memorized as shown on the right,

press the Remote’s “A” button to select the channels below.

<A>

1 2 5

8 5

3 8 – – –

2 5 1 2 3

3 0 – – –

4 0

5 5 – – – – – –

125 25

– – – – – – – – –

36F630(30-37)

03.3.5, 3:03 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Set Up (Continued)

VOLUME

)/(

H Universal Plus Function

(

VCR or DVD input mode will be selected automatically by pressing

the DVD/VCR PLAY button on the Remote Control.

CHANNEL

UP ( )/

DOWN (s)

DVD/VCR

PLAY

1 Press MENU to access the MAIN MENU screen.

SLEEP T I MER

2 Press CH a/s to move the “E” mark to “SET UP”.

V I DEO ADJ UST

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

→

(MAIN MENU screen)

3 Press VOL k/l to access the SET UP screen.

SET UP

BLUE SCREEN

PERSONAL PREF.

UN I VERSAL PL US

L ANGUAGE

CH SETT I NG

AUTO I NPUT

CH / I NPUT I D

SCREEN FORMAT

(SET UP screen)

4 Press CH a/s to move the “E” mark to “UNIVERSAL PLUS”.

SET UP

BLUE SCREEN

PERSONAL PREF.

UN I VERSAL PL US

L ANGUAGE

CH SETT I NG

AUTO I NPUT

CH / I NPUT I D

SCREEN FORMAT

5 Press VOL k/l to access the UNIVERSAL PLUS select screen

UN I VERSAL PLUS

to select VCR or DVD mode.

VCR

DVD

:OFF

(UNIVERSALPLUSselectscreen)

6 Press CH a/s to select the VCR or DVD, and press VOL k/l to

select “CH3”, “CH4”, “INPUT 1”, “INPUT 2”, “INPUT 3

(COMPONENT)” or “OFF”.

CH3

CH4

INPUT 1

INPUT 2

UN I VERSAL PLUS

VCR

DVD

:CH3

:OFF

INPUT 3 (COMPONENT )

OFF

Switch to the input mode your VCR or

DVD is connected to. If connected

through RF (antenna terminal), select

either CH3 or CH4 to match the setting

of the VCR or DVD.

→

7 Press MENU to exit.

36F630(30-37)

03.3.5, 3:03 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Auto Input

VOLUME

)/(

The unit is preset to switch to the INPUT 2 screen automatically

whenVIDEO equipment is connected to the INPUT 2 terminal. Do

the following to switch this feature off:

•

(

CHANNEL

UP ( )/

DOWN (s)

1 Press MENU to access the MAIN MENU screen.

SLEEP T I MER

2 Press CH a/s to move the “E” mark to “SET UP”.

V I DEO ADJ UST

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

→

(MAIN MENU screen)

3 Press VOL k/l to access the SET UP screen, then press

SET UP

CH a/s to move the “E” mark to “AUTO INPUT”.

BLUE SCREEN

PERSONAL PREF.

UN I VERSAL PL US

L ANGUAGE

CH SETT I NG

AUTO I NPUT

→

CH / I NPUT I D

SCREEN FORMAT

(SET UP screen)

4 Press VOL k/l to access the AUTO INPUT select screen.

AUTO I NPUT : AUTO

Press VOL k/l to select “AUTO”.

(

I NPUT2 )

(AUTO INPUT select screen)

5 You may turn off “AUTO INPUT” when it is not in use.

AUTO I NPUT : OFF

Press VOL k/l to select “OFF”.

(

I NPUT2 )

6 Press MENU to exit.

36F630(30-37)

03.3.5, 3:03 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

CH/Input ID

You can assign an ID label to each channel or input mode.These

ID labels can be 4 characters long maximum and will be displayed

along with the channel number/input mode when the labeled

channel is selected.

REMOTE

KEYPAD

•

VOLUME

(k)/(l)

(Example: labeling air channel 10 to “TV12”)

CHANNEL

UP (a)/

DOWN (s)

1 Press MENU to access the MAIN MENU screen.

SLEEP T I MER

V I DEO ADJ UST

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

(MAIN MENU screen)

2 Press CH a/s to move the “E” mark to “SET UP”.

SLEEP T I MER

V I DEO ADJ UST

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

3 Press VOL k/l to access the SET UP screen then, press

SET UP

CH a/s to move the “E” mark to “CH/INPUT ID” .

BLUE SCREEN

PERSONAL PREF.

UN I VERSAL PL US

L ANGUAGE

CH SETT I NG

AUTO I NPUT

→

CH / I NPUT I D

SCREEN FORMAT

(SET UP screen)

4 Press VOL k/l to access the CH/INPUT ID screen.

CH / I NPUT I D

A I R 1 0

: _ _ __

I D

(CH/INPUT ID screen)

36F630(30-37)

03.3.5, 3:03 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

CH/Input ID (Continued)

5 Use CH a/s or REMOTE KEYPAD to select each desired channel

to label.

Press INPUT on the Remote to label the INPUT mode.

ENTER

100

ID: Labeling the channel name

Press VOL k/l to select “ID”, then press VOL k to select the

first character. Press CH a/s to enter a desired letter. Press VOL

k/l to enter the next desired letter. Press MENU to return to the

CH/INPUT ID screen.

_ _ __

I D

RESET

MENU : RETURN

→

(ID Input screen)

Selectable characters:

Space: _

I D : TV1 2

RESET

Alphabets: A-Z

Numbers: 0-9

MENU : RETURN

Symbols: — . & ( ) / +

→

(Example: TV12)

RESET : Resetting the ID to “_ _ _ _”

Press CH a/s to move the “E” mark to “RESET”, then press

VOL k/l. The previously set ID will turn to “_ _ _ _”.

I D : TV1 2

RESET

MENU : RETURN

_ _ __

I D

RESET

MENU : RETURN

6 Press MENU to exit.

Note:

• The maximum number of ID labels available to register channel names is 20 for AIR channels and 40

for CABLE channels.

• If you wish to register a new ID when all the available ID labels are assigned, delete a registered ID

to make room.

36F630(30-37)

03.3.5, 3:04 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Screen Format

VOLUME

)/(

The format of the picture can be adjusted to either of the two

screen formats.

(This function allows you to view 16:9 pictures recorded on DVD

or by camcorders that are once saved using the 4:3 aspect ratio

to be played back in the original high-density 16:9 format.)

•

(

CHANNEL

UP ( )/

DOWN (s)

1 Press MENU to access the MAIN MENU screen.

SLEEP T I MER

2 Press CH a/s to move the “E” mark to “SET UP”.

V I DEO ADJ UST

AUD I O SEL ECT

CLOSED CAPT I ON

PARENT CONTROL

ENERGY SAVE

SET UP

→

(MAIN MENU screen)

SET UP

3 Press VOL k/l to access the SET UP screen, then press

BLUE SCREEN

PERSONAL PREF.

UN I VERSAL PL US

L ANGUAGE

CH a/s to move the “E” mark to “SCREEN FORMAT”.

CH SETT I NG

AUTO I NPUT

CH / I NPUT I D

SCREEN FORMAT

→

(SET UP screen)

SCREEN FORMAT

4 Press VOL k/l to access the SCREEN FORMAT select screen.

1 6

(SCREEN FORMAT select screen)

5 Press CH a/s to select “4:3” or “16:9”.

SCREEN FORMAT

1 6

6 Press MENU to exit.

Note:

The 16:9 screen format will be cancelled when the power is turned off.

Example:

While in 4:3 mode, if the picture appears stretched vertically as in screen A below, switch to 16:9

mode. The picture will return to normal as shown in screen B.

Screen A (4:3)

Screen B (16:9)

36F630(30-37)

03.3.5, 3:04 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Video and Audio Input Terminals

Connecting video equipment for playback of video material.

• To view video material from external video equipment, make sure to connect the equipment properly

to the input terminals on the TV set.

•

Connecting video device equipped with video output terminals

CONNECTIONS

VIDEO EQUIPMENT

(Front connection

terminals of TV)

Pull open the front door

IN 2

To VIDEO

OUTPUT

VIDEO

L-AUDIO-R

To AUDIO OUTPUT (L)

To AUDIO OUTPUT (R)

CAMCORDER

(Rear connection

terminals of TV)

TV GAME

To VIDEO OUTPUT

To AUDIO OUTPUT (L)

To AUDIO OUTPUT (R)

VCR

To AUDIO OUTPUT (R)

To AUDIO OUTPUT (L)

To VIDEO OUTPUT

DVD

Yellow : To video input terminal

White : To audio input (L) terminal

Red : To audio input (R) terminal

36F630(38-40)

03.3.5, 3:06 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Video and Audio Input Terminals (Continued)

Notes:

• COMPONENT terminals are DVD compatible, allows you to enjoy the highest quality playback

image than the image from IN 1 S-VIDEO terminal.

• The IN 1 S-VIDEO terminal is used to obtain a higher quality image by importing image signals.

• The S-VIDEO terminal is for the video image only. To receive an audio signal, connect the audio

cable to the IN 1 AUDIO terminals (left and right).

(Rear connection terminals of TV)

TO S-VIDEO OUTPUT

(When your video equipment

has an S-VIDEO output terminal).

VCR

To VIDEO OUTPUT

To COMPONENT

VIDEO OUTPUT

Terminals

To AUDIO

OUTPUT (L/R)

To AUDIO OUTPUT (L)

To AUDIO OUTPUT (R)

Video Equipment with Component

video (Component Color)

Output Terminals (Y, PB and PR

)

To watch video material play back

•

• Press the Remote’s INPUT button to select the VIDEO INPUT mode for the video equipment you

wish to play.

• The external VIDEO INPUT mode will change as follows each time the INPUT button is pressed.

AIR

CABLE

INPUT 1

(IN 1)

Rear

INPUT 2

(IN 2)

Front

INPUT 3 (COMPONENT)

(IN 3)

Rear

• When the AV cables are connected to theVIDEO INPUT 3 and COMPONENTY, PB and PR terminals

simultaneously, the COMPONENT terminal has priority over the VIDEO terminal.

• INPUT mode can be selected by pressing either the CH a on the TV remote control when the TV is

set to the highest channel stored in memory, or by pressing the CH s when it is set to the lowest

channel.

Note:

• When connecting video or audio equipment to the television, be sure that the power is turned off in

order to prevent damage to either the television or the equipment being connected.

• The S-Video terminal has priority over the VIDEO terminal (IN 1). When you wish to use video

equipment connected to the VIDEO terminal (IN 1), unplug equipment connected to the S-VIDEO

terminal.

• It is the intent of SHARP that this product be used in full compliance with the copyright law of the

United States and that prior permission be obtained from copyright owners whenever necessary.

• For detailed information on the connection and use of auxiliary equipment, refer to the instruction

manuals of the equipment being used.

• The connection cables/cords can be obtained from your local video store.

36F630(38-40)

03.3.5, 3:06 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Using the Audio Output Terminals

These terminals are used for connecting an external audio amplifier. The STEREO/MONO/

SAP,VOLUME, MUTE and FAO functions can all be controlled via the television’s remote control

or directly on theTV itself.These terminals relay the audio signal of all programs being displayed

on theTV screen.

•

(AUDIO OUTPUT terminals are located on the rear of the cabinet.)

CONNECTIONS

(Rear connection terminals of TV)

To the audio

input terminals

Stereo Amplifier

Speaker System

(1) Before connecting the cables, turn on the TV and adjust the TV volume to a moderate listening level.

(2) Turn off the TV and connect the audio cables to the AUDIO LINE OUTPUT terminals on the TV.

(3) Turn the TV set and stereo amplifier on.

(4) If you desire, you can turn off the sound of the TV’s internal speakers by accessing the TV’s AUDIO

SELECT screen. See pages 12, 13.

(5) Adjust the volume control on the stereo amplifier to a moderate listening level.

(6) Control of the audio can be adjusted using the audio controls (STEREO/MONO/SAP, VOLUME,

MUTE and FAO), from either the remote control, or directly from the TV set.

Note:

• For detailed information on the connection and use of auxiliary equipment, refer to the operation

manuals of the equipment being used.

• When connecting monaural equipment to the AUDIO INPUT or OUTPUT of this set, use an audio

connection cord and plug adaptor as shown below.

• When FAO is set to “OFF”, we recommend you to keep the TV’s audio output level high for optimal

sound quality. (see page 12.)

Plug adapter

To the equipment

being connected

To the TV

Pin plug x 2

Pin Plug

Pin jack/Mini plug

36F630(38-40)

03.3.5, 3:06 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation of Universal Remote Control

“Identifying” VCRs, cableTV conveters and

Universal Remote Control

•

DVDs

With the purchase of your television set you

also have received the latest innovation in

remote control technology.With its easy-to-use

push button keyboard, your Remote can

control your television set and most infrared

remote controlled VCRs, cable TV converters

and DVDs as well.

Your Remote Control has been set at the

factory to operate your TV and many remote

controlled VCRs, cable TV converters and

DVDs. However, in some cases an easy one-

time set-up step may be necessary before the

Remote will operate accessory VCRs, cable

TV converters and DVDs.

Note:

• In this set-up step, the Remote locates and

memorizes the remote control transmitter code

for the VCR, cable TV converters and DVDs.

• Once “identified”, the Remote sends proper

signals to operate your accessory.

• Depending on the model, year produced,

brand and type of VCR, cable TV converter

and DVD, some models may not be compatible

with the remote control.

• This identifying step will not have to be

repeated until power to the Remote is

interrupted due to a battery failure.

• Some brands may not enable channel

selection until the ENTER button is pressed.

In such case, try the following.

Example:

Using your remote control with a VCR

•

When you select channel 24,

(1) Press REMOTE KEYPAD “2”.

(2) Press REMOTE KEYPAD “4”.

(3) Press ENTER.

Once you make certain the Remote Control

has “identified” your remote controlledVCR or

DVD, the Remote is ready to operate your unit.

The various VCR or DVD function buttons on

the Remote will not operate your VCR or DVD

if those features are not already found on your

unit.

For detailed information on the use of the

CableTV converter Box refer to their operating

manuals.

• All VCR buttons will operate whether the

Remote is in TV or VCR modes.

• For detailed information on the use of theVCR

or DVD, refer to the operation manual of the

VCR or DVD.

Using your Remote with your TV

•

After installing the batteries, press the TV/VCR

on the Remote to select the TV mode. (If you

can change the channel of theTV by pressing

CH a/s on the Remote Control, it is in the

TV mode.)

REMOTE KEYPAD

ENTER

Use to enter two-digit code

numbers when identifying your

VCR, DVD and CATV converter.

VCR CHANNEL

UP ( )/ DOWN (

)

Press to scan up or down through

channels on the VCR.

PLAY

Press to playback a tape or disc.

DVD SKIP

POWER (DVD/VCR)

Press to turn the VCR or DVD

on and off.

Press to jump forward to the

beginning of the next chapter/track,

or backward to the beginning of the

current chapter/track, and

automatically start to play that

chapter/track.

REVERSE

Press to rewind a tape or

reverse a disc. For some VCRs

or DVDs you may need to

press STOP first, then REVERSE.

REC

Press to begin recording.

(VCR only)

STOP

FORWARD

Press to stop the tape or disc.

Press to rapidly advance the

tape or disc. For some VCRs or

DVDs, you may need to press

STOP first, then FWD.

PAUSE

Press to temporarily stop the

tape or disc during playback

or recording (VCR only).

Press again to release PAUSE.

36F630(41-43)

03.3.5, 3:07 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation of Universal Remote Control (Continued)

POWER

CATV/DVD-TV/VCR

DISPLAY

REMOTE

KEYPAD

CHANNEL

UP (a)/

DOWN (s)

POWER

(DVD/VCR)

How to identify a VCR

Some brands have more than one remote code

listed, due to changes in the remote codes

from early to later model years, or due to format

differences (VHS/BETA). In such cases, you

may have to try more than one code to find

the code your VCR accepts.

•

The remote control may already be set to

operate your VCR.Try this initial check before

going on to the following “identifying” section.

(1) Press TV/VCR button.

(2) Point the Remote towards VCR and press

POWER (DVD/VCR).

(3) Does the Remote turn theVCR ON and OFF?

• If yes, the Remote is ready to operate theVCR

and no further steps are needed.

Note:

Depending on the model, year produced,

brand, and type of VCR, some models may

not be compatible with the remote control.

• If no, continue to the “identifying” section.

Search Method

Direct Entry Method

(1) Press TV/VCR button.

Refer to the following steps and list to quickly

find the remote control code for your accessory

VCR.

• First look up your VCR’s remote control code

number before going through the Direct Entry

Method.

• If this procedure does not identify your

accessory VCR, use the Search Method of

identification (described in the next section).

(2) Press POWER of the VCR to ON.

(3) Stand at least 6 feet away from the front of the

VCR.

Point the Remote towards the VCR.

Hold down DISPLAY and CH a at the same

time. KEEP HOLDING THE BUTTONS

DOWN.

(4) Watch the Channel Number indicator on the

VCR, Channel numbers will scan up when the

VCR has been identified.

(1) Press TV/VCR button.

Release DISPLAY and CH a as soon as the

channel numbers start to scan up.

The VCR’s remote control code number has

been identified, and the Remote is ready to

operate the VCR.

(2) Press and hold down DISPLAY and CH s on

your remote control.

Then release both buttons.

(3) Within 10 seconds after releasing DISPLAY

and CH s , enter your VCR’s two-digit remote

control code number using the REMOTE

KEYPAD (refer to the list on page 43).

• The remote control is now ready to send

commands to your VCR.

36F630(41-43)

03.3.5, 3:07 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation of Universal Remote Control (Continued)

REMOTE CONTROL

CODE NUMBER

VCR BRAND

CATV/DVD-

TV/VCR

Akai

25, 26, 37

15, 22, 30

10, 31

15, 22, 30

21, 32, 35

09, 10, 11

28, 29

POWER

Audio Dynamics

Broksonic

Canon

Capehart

Craig

Curtis Mathis

Daewoo

DBX

Dynatech

Emerson

Fisher

DISPLAY

REMOTE

KEYPAD

CHANNEL

UP (a)/

DOWN (s)

Funai

Goldstar

Hitachi

Instant Replay

JC Penney

JVC

Kenwood

Lloyds

04, 06, 24, 30

15, 41, 42

14, 15

Magnavox

Magnin

04, 05, 08

Marantz

Memorex

Minolta

04, 10, 24, 29

Tips on identifying your VCR

If your VCR model does not have the “channel up”

function on its remote control, it cannot be identified

using the Search Method for identifying. For such

models, please try the Direct Entry Method of

identifying.

Be Patient: A minute or two can seem a lot longer

when you’re waiting for something to happen, but

the code should be identified within 2 minutes.

Remember, it is only a one-time set-up.

Be careful not to let the VCR scan more than 5

channels when the indicator starts to move up. If

you continue holding down the DISPLAY and CH

a after 5 channel scans, the proper remote code

can be passed up, and the 2 minutes identifying

cycle will have to be repeated.

If a channel change does not occur on the VCR

within 2 minutes, read the identifying instructions

again and repeat the steps. Should a channel

change still not occur, the Remote will not operate

with the desired VCR.

Mitsubishi

Montgomery Ward

Multitech

NEC

Panasonic

Pentax

Philco

Philips

Quasar

RCA

Realistic

Samsung

Sanyo

Scott

Sears

Sharp

Shintom

Sony

Sound Design

Sylvania

Symphonic

Tatung

17, 18, 39, 40

02, 43

15, 22, 30

04, 44

05, 06

04, 05

04, 05, 08

06, 07, 33

01, 02, 10, 24

23, 31

14, 10

06, 11, 24

01, 02, 03

12, 13, 38

04, 05, 08

Teac

15, 29

27, 29

Teknika

Thomas

TMK

Toshiba

Video Concepts

Yamaha

Zenith

19, 20

15, 29, 30

36F630(41-43)

03.3.5, 3:07 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation of Universal Remote Control (Continued)

POWER

CATV/DVD-

TV/VCR

INPUT

DISPLAY

REMOTE

KEYPAD

CHANNEL

UP (a)/

DOWN (s)

POWER

(DVD/VCR)

How To Identify a DVD

•

REMOTE CONTROL

CODE NUMBER

DVD BRAND

The remote control may already be set to

operate your DVD. Try this initial check before

going on to the following “identifying” section.

Denon

JVC

01, 10

Magnavox

Marantz

Mitsubishi

Panasonic

Philips

Pioneer

Proscan

RCA

Samsung

Sharp

Sony

Toshiba

Yamaha

Zenith

(1) Press CATV/DVD button.

(2) Point remote towards DVD and press POWER

(DVD/VCR).

(3) Does the Remote turn the DVD ON and OFF?

• If yes, the Remote is ready to operate the DVD

and no further steps are needed.

• If no, continue to the “identifying” section.

Direct Entry Method.

Refer to the following steps and list to quickly

find the remote control code for your accessory

DVD.

• First look up your DVD’s remote control code

number before going through the Direct Entry

Method.

Note:

Depending on the model, year produced,

brand, and type of DVD, some models may

not be compatible with the remote control.

(1) Press CATV/DVD button.

(2) Press and hold down INPUT and CH s on

your remote control.

Then release both buttons.

(3) Within 10 seconds after releasing INPUT and

CH s, enter your DVDs two-digit remote

control code number using REMOTE KEYPAD

(refer to the list).

• The remote control is now ready to send

commands to your DVD.

36F630(44-45)

03.3.5, 3:07 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Operation of Universal Remote Control (Continued)

How to identify a cable converter

•

REMOTE CONTROL

CODE NUMBER

CATV CONVERTER

BRAND

Direct Entry Method.

Refer to the following steps and list to quickly

find the remote control code for your cable TV

converter.

• First look up your converter’s remote code

number before going through the Direct Entry

Method below.

• If this procedure does not identify your

converter, use the Search Method for

identification.

Anvision

Cable Star

Eagle

07, 08

04, 05, 15, 23, 24, 25,

30, 36

04, 05, 15, 23, 24, 25

30, 36

07, 08, 19, 25, 28, 29,

32, 33, 40, 41

General Instrument

Jerrold

Magnavox

Oak Sigma

Panasonic

Philips

27, 39

(1) Press CATV/DVD button.

(2) Press and hold down DISPLAY and CH s on

your remote control.

07, 08, 19, 26, 28, 29,

32, 33, 40, 41

18, 20

07, 08

27, 43

03, 22, 42

07, 08, 19, 26, 28, 29

32, 33, 40, 41

Pioneer

Randtek

RCA

Scientific Atlanta

Sony

Viewstar

Then release both buttons.

(3) Within 10 seconds after releasing DISPLAY

and CH s, enter your converter’s two-digit

code number using REMOTE KEYPAD (refer

to the list).

• The remote control is now ready to send

commands to your converter.

Zenith

• Some brands have more than one remote code

listed due to changes in the remote codes from

early to later model years. In such cases, you

may have to try more than one code to find

the code your converter accepts.

Tips on identifying your cable converter

Be Patient: A minute or two can seem a lot

longer when you’re waiting for something to

happen, but the code should be identified

within 2 minutes. Remember, it is only a one-

time set-up.

Note:

Be careful not to let the CATV converter scan

more than 5 channels when the indicator starts

to move up. If you continue holding down the

DISPLAY and CH a after 5 channel scans,

the proper remote code can be passed up, and

the 2 minute identifying cycle will have to be

repeated.

If a channel change does not occur on the

cable converter within 2 minutes, read the

identifying instructions again and repeat the

steps.Should a channel change still not occur,

the remote will not operate with the desired

converter.

Depending on the model, year produced,

brand, and type of CATV converter, some

models may not be compatible with the remote

control.

Search Method

(1) Press CATV/DVD button.

(2) Press the power button on the cable converter

to ON.

(3) Stand at least 6 feet away from the converter.

Point the Remote towards the converter.

Hold down the DISPLAY and CH a at the

same time. KEEP HOLDING THE BUTTONS

DOWN.

Note:

(4) Watch the Channel Number indicator on the

converter.

Some satellite receivers can be operated by

the REMOTE CONTROL. If you have a

Satellite Receiver, you can use the above

method to search for available channels.

Channel numbers will scan up when the

converter has been identified.

Release the DISPLAY and CH a as soon as

the channel numbers start to scan up.

The converter’s remote control code number

has been identified, and the Remote is ready

to operate the converter.

36F630(44-45)

03.3.5, 3:07 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Before Calling for Service

Check these items and see if you can correct the trouble with a slight adjustment of the controls.

QUICK SERVICE

CHECK LIST

POSSIBLE REMEDY

Try a new channel, if OK, then there

X X

X X X

X X

is a possible station trouble.

Is TV plugged in? Power at outlet?

Is TV’s POWER button on?

X X

X X X

X X

Is antenna connected to terminal on

the back of the set?

X X

X X X

X X

If outside antenna is being used,

check for broken wire.

Check for local interference or

external electrical noise.

X X

X X X

X X

Turn off the POWER and then turn it

on after about a minute.

X X

X X X

X X

Adjust COLOR control.

Adjust PICTURE control.

Check external Video/Audio products:

look for loose/broken connection

leads. (Refer to pages 38–40)

X X

X X X

X X

X X X

X X

Check batteries of Remote Control.

Press TV/VCR button on the Remote

to select TV mode.

Are audio cables connected firmly?

Check the volume level.

X X

X X X

X X

Is SPEAKER ON? See pages 12,13.

Change Closed Caption mode to

“OFF”/Energy Save mode to “OFF”.

Unplug the TV and plug it in again

after 2 minutes or longer.

X X

X X X

X X

Note:

• If no TEXT broadcast is being received while viewing in the TEXT

mode, the screen may become dark and blank for some programs.

Should this occur, switch the Closed Caption mode to “OFF”.

(Dark and Blank Picture)

Calling for Service

For location of the nearest Sharp Authorized Servicer, or to obtain product literature accessories, supplies,

or customer assistance, please call 1-800-BE-SHARP.

36F630(46)

03.3.5, 3:08 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Specifications

MODEL

36F630

NTSC

Receiving System

Stereo Broadcast

Reception Channels

MTS/SAP

AIR

VHF

UHF

2-13 ch

14-69 ch

CATV

1-125 ch

Channel Tuning

181-channel Reception PLL tuning system

VHF/UHF 75 ohm Unbalanced

36˝ Diagonally Measured

Antenna Input Impedance

Screen Size

Terminals

Audio/Video input x 3 (Front x 1, Rear x 2)

S-Video input x 1 (Rear)

COMPONENT-IN x 1 (Rear)

Audio output x 1 (Rear)

Antenna x 1 (Rear)

Sound Output

5 W (RMS) x 2

AC 120 V, 60 Hz

170 W

Power Source

Power Consumption

Dimensions

34 ³³/⁶⁴˝ (W) x 30 ⁶³/⁶⁴˝ (H) x 23 ⁷/⁸˝ (D)

[(W) x (H) x (D)] mm

[877 mm (W) x 787 mm (H) x 606.5 mm (D)]

Weight (approx.)

185.2 lbs. (84 kg)

• Design and specifications are subject to change without notice.

36F630(47-48)

03.3.5, 3:08 PM

Dimension: 140mm x 215mm

Download from Www.Somanuals.com. All Manuals Search And Download.

(ESPAÑOL)

Lea estas instrucciones cuidadosamente y consérvelas a la mano para consultarlas en el futuro.

IMPORTANTE

N° de modelo :

Sírvase anotar el modelo del televisor y los números de serie

en el espacio provisto, para ayudar a reportar en caso de

pérdida o robo. Los números están ubicados en la parte

posterior del televisor.

N° de serie :

INFORMACIÓN IMPORTANTE

Existen dos razones importantes para registrar dentro del plazo límite la garantía de su nuevo televisor

SHARP, mediante la TARJETA DE REGISTRO incluida con el aparato.

PRIMERA – GARANTÍA

Garantiza al cliente la recepción inmediata de todas las prestaciones de consumidor en cuanto a piezas, servicio

técnico y mano de obra aplicable a su adquisición.

SEGUNDA – ACTA DE SEGURIDAD DE PRODUCTOS DE CONSUMIDOR

Con el fin de garantizar al cliente la recepción puntual de cualquier notificación de seguridad sobre inspección,

modificación o cancelación que se le pueda solicitar a SHARP bajo el Acta de seguridad de productos de

consumidor de 1972.LEA CUIDADOSAMENTE LA CLÁUSULA “GARANTÍA LIMITADA”DE LA ÚLTIMA PÁGINA.

¿QUÉ ES ENERGY STAR

Los televisores y las videograbadoras utilizan energía cuando están encendidos ó apagados.Los norteamericanos

gastan más de 1 billón de dólares al año en la energía que consumen televisores y videograbadoras cuando no

se encuentran en uso. Los nuevos modelos ENERGY STAR reducen esa “fuga” de energía hasta en un 75

por ciento. Esto implica más de 500 millones de dólares al año en ahorro de energía para los consumidores.

El ahorro de energía ayuda a reducir el consumo de combustibles fósiles y por tanto la contaminación por

dióxido de carbono que contribuye al calentamiento global. Si cada familia norteamericana sustituyera sus

televisores y videograbadoras por modelos ENERGY STAR , se reducirían las emisiones de dióxido de carbono

en cinco millones de toneladas cada año (equivalente a eliminar la contaminación procedente de más de un

millón de automóviles).

El uso de productos ENERGY STAR permite reducir el monto de las facturas de energía eléctrica y consumir

menos energía. De este modo ahorrará dinero y ayudará a proteger el medio ambiente.

PARA REDUCIR EL RIESGO DE INCENDIO O DESCARGA

ELÉCTRICA, NO EXPONGA ESTE APARATO A LA HUMEDAD.

ADVERTENCIA :

El relámpago con cabeza de

flecha dentro de un triángulo trata

de indicar al usuario que las partes

dentro del producto representan

riesgo de electrochoque para las

personas.

PRECAUCIÓN : PARA REDUCIR EL RIESGO DE

El signo de exclamación dentro de

DESCARGAS ELÉCTRICAS, NO RETIRE LA CUBIERTA

un triángulo trata de indicar al

(NI EL PANEL POSTERIOR).

usuario que las instrucciones

importantes de operación

NO CONTIENE PIEZAS REPARABLES POR EL USUARIO.

SOLICITE ASISTENCIA TÉCNICA A PERSONAL DE

SERVICIO TÉCNICO ESPECIALIZADO.

servicio se encuentran en los

documentos con el aparato.

“Nota para el instalador del sistema de TV por cable: Esta nota tiene el propósito de llamar la atención del

instalador del sistema de cable acerca del Artículo 820-40 del Código Eléctrico Nacional, que contiene las

directrices para la puesta a tierra y, en particular, especifica que el cable de puesta a tierra debe estar

conectado al sistema de puesta a tierra del edificio lo más cerca a la entrada del cable.”

36F630(47-48)

03.3.5, 3:08 PM

Dimension: 140mm x 215mm

Download from Www.Somanuals.com. All Manuals Search And Download.

INFORMACIÓN IMPORTANTE (Continuación)

ADVERTENCIA-LasNormasdelaFCCestablecenquecualquiercambioomodificaciónnoautorizadaque

se realice en este equipo y que no esté expresamente aprobado por el fabricante podría anular la autoridad

del usuario para utilizar este equipo.

DESECHO DEL PRODUCTO

Este producto utiliza un Tubo de rayos catódicos (TRC) que contiene soldadura de estaño y plomo.

El desecho de estos materiales deberá ser considerando regulaciones ambientales. Para obtener

información sobre el desecho o el reciclado, póngase en contacto con las autoridades locales o con

Electronics Industries Alliance: www.eiae.org

PRECAUCIÓN: No coloque el cable de alimentación de CA debajo del televisor u otro elemento pesado.

MEDIDAS DE SEGURIDAD IMPORTANTES

PRECAUCIÓN :

Lea por favor todas estas instrucciones antes de poner en funcionamiento

su televisor, y guárdelas para poder utilizarlas en el futuro.

La energía eléctrica permite realizar muchas funciones útiles. Este aparato ha sido diseñado y fabricado para

garantizar su seguridad física. Sin embargo, UNA UTILIZACIÓN INAPROPIADA PODRÍA SER LA CAUSA DE

DESCARGAS ELÉCTRICAS O INCENDIOS. Para mantener el buen funcionamiento de este equipo y evitar

problemas, siga las normas básicas indicadas a continuación cuando lo instale, utilice o repare.

Desenchufe el televisor del tomacorriente antes de limpiarlo.

No utilice líquidos ni aerosoles de limpieza. Para limpiar el televisor utilice un paño húmedo.

No utilice accesorios que no los recomiende el fabricante del televisor porque podrían causar peligros.

No utilice el televisor cerca del agua – por ejemplo, cerca de una bañera, lavado, fregadero o lavadora, en

un sótano húmedo, cerca de una piscina, etc.

No utilice este televisor sobre un carrito, un soporte o una mesa inestables. El televisor podría caerse

causando serías heridas a niños o adultos, y, por supuesto, el aparato se estropearía. Ponga el televisor

solamente sobre un carrito o soporte recomendado por el fabricante, o vendido junto con

el televisor.

La combinación de carrito y televisor debe moverse con mucho cuidado. Las paradas

rápidas, la fuerza excesiva y las superficies irregulares pueden ser la causa de que la

combinación de televisor y carrito se volteen.

Cuando instale el televisor en una pared o en una estantería siga las instrucciones del

fabricante, y utilice el kit de montaje aprobado por el fabricante.

Las ranuras y aberturas de la caja y del panel posterior o inferior sirven para la ventilación del aparato, para

que éste funcione bien y para evitar que se caliente.Estas aberturas no deben taparse nunca.Este televisor

no debe colocarse en un lugar cerrado (como un estante para libros) si éste no dispone de la ventilación

apropiada.

Las aberturas no deben taparse nunca con un paño u otro material; y las aberturas del panel inferior no

deben taparse tampoco colocando el televisor sobre una cama, sofá, alfombra u otra superficie similar.

Este televisor no debe ponerse nunca cerca o encima de un radiador u otro aparato que produzca calor.

10. Este televisor sólo debe funcionar con la fuente de corriente indicada en la etiqueta del fabricante. Si no

está seguro acerca del tipo de corriente de su hogar, póngase en contacto con el concesionario de quien

adquirió el televisor o con la compañía eléctrica local.

En el caso de equipos de televisión diseñados para funcionar con baterías, consulte las instrucciones de

uso.

11. Como medida de seguridad, el equipo de televisión está equipado con un enchufe polarizado de dos hilos.

El enchufe polarizado de dos hilos solamente calza de una sola manera en el tomacorriente.

Si el enchufe no entra en el tomacorriente, pídale a un electrícista que le coloque un tomacorriente nuevo.

No modifique el enchufe porque anulará esta característica de seguridad.

12. No permita que se apoye nada sobre el cable de alimentación. No ponga este televisor donde el cable

pueda ser deformado por personas que caminen sobre él.

36F630(49)

03.3.5, 3:09 PM

Dimension: 140mm x 215mm

Download from Www.Somanuals.com. All Manuals Search And Download.

MEDIDAS DE SEGURIDAD IMPORTANTES (Continuación)

13. Cumpla con todos los avisos y las instrucciones marcados en el televisor.

14.

Si se conecta una antena exterior al televisor, asegúrese de que el sistema de antena esté conectado a

tierra para obtener cierta protección ante los aumentos de voltaje y la acumulación de cargas estáticas.

La sección 810 del Código Eléctrico Nacional ofrece información relacionada con la conexión a tierra

correcta del poste y la estructura de apoyo, la conexión a tierra del cable de entrada a una unidad de

descarga, el tamaño de los conductores de conexión a tierra, la ubicación de la unidad de descarga de

antena, la conexión a los electrodos de conexión a tierra, y los requisitos para el electrodo de conexión a

tierra.

15. Para proteger aún más este televisor durante tormentas eléctricas o cuando se deje sin atender y sin

utilizar durante largos periodos de tiempo, desenchufe el cable de alimentación del tomacorriente y

desconecte la antena. Esto evitará que el aparato pueda estropearse debido a los relámpagos y la

sobretensión en la línea de alimentación.

16. Un sistema de antena exterior no debe ubicarse cerca de líneas de alimentación elevadas, ni cerca de

luces eléctricas o circuitos de alimentación.Tampoco debe ubicarse donde pueda caer sobre tales líneas

o circuitos de alimentación. Cuando instale un sistema de antena exterior, tenga muchísimo cuidado

para no tocar las líneas o circuitos de alimentación porque el contacto podría causar un accidente mortal.

17. No sobrecargue los tomacorrientes ni los cables de extensión porque esto podría causar un incendio o

descarga eléctrica.

18. No meta nunca ningún objeto en el interior del televisor porque podría tocar piezas con alta tensión o

causar un cortocircuito con otras piezas causando un incendio o descarga eléctrica. No derrame nunca

ningún tipo de líquido sobre el televisor.

19. No trate de reparar el televisor usted mismo porque al abrir o quitar las tapas podría exponerse a una

descarga de tensión u otros peligros.Las reparaciones debe realizarlas el personal de servicio CALIFICADO.

20. Desenchufe este televisor del tomacorriente y solicite el servicio de un técnico calificado cuando se

produzcan las condiciones siguientes:

A. Cuando el cable de la alimentación o el enchufe estén estropeados.

B. Cuando haya derramado un líquido sobre el televisor.

C. Si el televisor ha quedado expuesto a la lluvia o al agua.

D. Si el televisor no funciona normalmente siguiendo las instrucciones de utilización. Ajuste solamente

los controles indicados en las instrucciones de utilización. Un ajuste inadecuado de otros controles

podría estropear el aparato y, entonces, sería necesario acudir a un técnico CALIFICADO para que

éste lo repare y lo devuelva a su condición normal.

E. Si el televisor se ha caído o la caja se ha estropeado.

F. Cuando las prestaciones del televisor cambien considerablemente será necesario llamar al servicio

de reparaciones.

21. Al finalizar cualquier servicio o reparación de este televisor, pida al técnico de servicio que realice

comprobaciones de seguridad rutinarias para determinar si el televisor puede funcionar sin causar ningún

problema.

22. Cuando sea necesario cambiar piezas, cerciórese de que el técnico de servicio utiliza las piezas de

CAMBIO especificadas por el fabricante, aquellas que tengan las mismas características que las piezas

originales. Las piezas de recambio no autorizadas pueden causar incendios, descargas eléctricas u

otros peligros.

36F630(50)

03.3.5, 3:09 PM

Dimension: 140mm x 215mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Referencia rápida de los controles de operación

Nombres de los componentes

Panel Delantero

(ESPAÑOL)

•

TERMINALES DE ENTRADA

VIDEO/AUDIO IN 2

ALIMENTACION (POWER)

Pulsando → Enciende (On).

Pulsando nuevamente →

Apaga (Off).

POWER

–

VOL

PULL-OPEN

(POR DENTRO DE LA PUERTA)

CANAL SUPERIOR/INFERIOR

(a) Selecciona el siguiente canal

superior.

(s) Selecciona el siguiente canal

inferior.

POWER

–

VOL

SENSOR DE CONTROL

REMOTE

MENU (MENU)

AUMENTO/DISMINUCION DEL

VOLUMEN (VOL)

Pulsando → Accede al MENU PRINCIPAL.

Pulsando nuevamente → Sale del MENU

PRINCIPAL.

(k) Aumenta el sonido.

(l) Disminuye el sonido.

Funciones Basicas Del Control Remoto

ALIMENTACION (POWER)

Pulsando → Enciende (On).

Pulsando nuevamente → Apaga (Off).

Ventanilla del transmisor de infrarrojos

Botones CATV/DVD-TV/VCR MODE

PulseTV/VCR → Las señales enviadas serán

para el control del televisor

videograbadora.

de la

TECLADO A DISTANCIA

(REMOTE KEYPAD)

Para tener acceso a cualquier

canal empleando las teclas.

Pulse CATV/DVD → Las señales enviadas

serán para el control del Convertidor de TV

por cable y de la Reproductor de DVD.

RETORNO AL CANAL

ANTERIOR (FLASHBACK)

Para volver al canal anterior.

PREFERENCIAS PERSONALES

Con los botones Personal Preference puede

programar sus programas favoritos utilizando las

cuatro categorías A, B, C y D.

VISUALIZACION (DISPLAY)

Pulsando → Aparece el canal de recepción por 4

segundos.

Pulsando nuevamente → Elimina la visualización.

•

En el modo de “Closed Caption” se muestra el

canal de recepción por un

Puede acceder a los canales rápidamente

utilizando estos botones. (Consulte la página 32)

corto tiempo.

ENTRADA (INPUT)

Pulsando → Cambia al modo de entrada 1

del vídeo externo.

Pulsando 2 veces → Cambia al modo de

entrada 2 del vídeo externo.

Pulsando 3 veces → Cambia al modo de

entrada 3 del vídeo externo o al modo

COMPONENT.

Pulsando 4 veces → Vuelve al modo TV

original. Consulte la página 39.

AUMENTO/DISMINUCION DEL

VOLUMEN (VOLUME UP/DOWN)

(k) Aumenta el sonido.

(l) Disminuye el sonido.

•

Cambia o selecciona los ajustes de TV

en la visualización en pantalla.

PREPARACION (MENU)

Pulsando → Accede al MENU PRINCIPAL.

Pulsando nuevamente → Sale del

MENU PRINCIPAL.

INTRODUCIR (ENTER)

SILENCIAMIENTO (MUTE)

Se utiliza en algunos casos en los cuales una

Caja de Inversor de Cable requiere una orden

“enter” después de seleccionar los canales,

al usar el teclado a distancia (consulte la

página 41).

Pulsando → Silencia el sonido.

Pulsando nuevamente → Restaura el sonido.

•

Cuando se silencia el sonido, CLOSED

CAPTION aparece si se encuentra disponible.

CANAL SUPERIOR/INFERIOR

(CHANNEL UP/DOWN)

(a) Selecciona el siguiente canal superior.

(s) Selecciona el siguiente canal inferior.

ALIMENTACION (DVD/VCR) [POWER

(DVD/VCR)]

Pulsando → Enciende (On).

Pulsando nuevamente → Apaga (Off).

•

Consulte las páginas 28–30 para obtener

información sobre el preajuste de canales.

En el modo de MENU, mueve la marca “ E ”.

CONTROLES DEL DVD/VIDEO

(consulte la página 41).

•

SKIP/VCR-CH

(consulte la página 41).

REC

(consulte la página 41).

Nota:

•

Los botones que arriba pueden verse sombreados en el Control Remoto lucen en la oscuridad. Para usar el visor del

control remoto que luce en la oscuridad, colocarlo bajo una luz fluorescente u otra fuente luminosa.

El material fosforescente no contiene elementos radiactivos ni tóxicos, de modo que su uso no representa ningún peligro.

El grado de iluminación variará de acuerdo con la potencia de la luz utilizada.

•

El grado de iluminación irá decayendo con el tiempo y dependiendo de la temperatura.

El tiempo necesario para cargar el visor fosforescente variará de acuerdo con la iluminación circundante.

La luz del sol y la luz fluorescente son las más eficaces para la carga del visor.

36F630(51-52)

03.3.5, 3:10 PM

Dimension: 140mm x 215mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Antes de llamar al servicio de reparaciones

Verifique estos puntos para ver si usted mismo puede solucionar el problema.

LISTA DE

COMPROBACIONES

DE SERVICIO

RAPIDO

POSIBLE SOLUCIÓN

Pruebe con otro canal y si todo está

bien, el problema puede ser de la

emisora.

X X

X X X X

X X

Está conectado el televisor?

X X

X X X X

X X

Llega electricidad al tomacorrientes?

Está conectado el interruptor del

televisor?

Está conectado la antena al terminal del

panel posterior del televisor?

Si utiliza una antena exterior, cerciórese

de que el cable no esté dañado.

X X

X X X X

X X

Compruebe si hay interferencia local.

XX X X X X

Desconecte el interruptor POWER y

vuelva a conectarlo después de

transcurrir un minuto.

X X

X X X X

X X

Ajuste el control de COLOR.

Ajuste el control de MATIZ.

X X

X X X X

X X

Verifique los productos externos de

Video/Audio, revise si hay fugas de

conexiones sueltas o rotas.

X X

X X X X

X X

Compruebe el estado de las pilas del

mando a distancia.

X X

X X X X

X X

Deslice CATV/DVD-TV/VCR selector

para situarlo sobre la posición TV.

Están bien conectados los cables de

X X

X X X X

sonido? Compruebe el nivel del volumen.

Está conectado el altavoz?

X X

Desactive (OFF) el modo CLOSED

CAPTION / Desactive (OFF) el modo

Ahorro de Energía (Energy Save).

X X

X X X X

X X

Desenchufe el televisor y vuelva a

enchufarlo despúes de dos minutos o más.

Nota:

• Cuando se ve en modo TEXTO sin recibir emisiones de TEXTO, la

pantalla puede ponerse en blanco y negro. Si ocurriera ésto, ponga el

modo CLOSED CAPTION en OFF.

(Imagen oscura y en blanco)

Solicitud de servicio técnico

Para la localización del Servicio Técnico Autorizado de Sharp más próximo o para conseguir material de

información, repuestos o asistencia técnica, llame a 1-800-BE-SHARP.

36F630(51-52)

03.3.5, 3:10 PM

Dimension: 140mm x 215mm

Download from Www.Somanuals.com. All Manuals Search And Download.

(FRANÇAIS)

Lisez attentivement ces instructions et gardez-les à proximité pour toute référence ultérieure.

IMPORTANT

N° du modèle :

N° de série :

Afin de vous aider en cas de perte ou de vol, inscrivez les

numéros de série et de modèle du téléviseur dans les

espaces fournis à cet effet. Ces numéros sont situés à

l’arrière du téléviseur.

INFORMATIONS IMPORTANTES

Deux raisons importantes d’enregistrer rapidement la garantie de votre nouveau téléviseur SHARP à

l’aide de la carte d’enregistrement (REGISTRATION CARD) incluse dans le colis :

LA PREMIERE – LA GARANTIE

Grâce à elle, vous obtiendrez immédiatement les avantages client concernant la garantie des pièces, du

service et des travaux applicable à votre achat.

LA DEUXIEME – LA LOI SUR LA SECURITE DU PRODUIT DE CONSOMMATION (CONSUMER

PRODUCT SAFETY ACT)

Grâce à elle, vous recevrez rapidement un avis de sécurité lors du contrôle, de la modification ou du rappel de votre

produit que SHARP peut être amené à fournir conformément à la loi de 1972 sur la sécurité du produit de consommation.

LISEZ ATTENTIVEMENT LE PARAGRAPHE «GARANTIE LIMITEE» DE LA DERNIÈRE PAGE.

ENERGY STAR : QU’EST-CE QUEC’EST

Les téléviseurs et les magnétoscopes utilisent de l’énergie lorsqu’ils sont allumés et éteints. Les Américains dépensent

plus d’1 milliard de dollars par an en énergie consommée par les téléviseurs et les magnétoscopes une fois éteints. Les

nouveaux modèles ENERGY STAR réduisent jusqu’à 75 % ce gaspillage d’énergie. Ce qui représente finalement

plus de 500 millions de dollars par an d’économie d’énergie pour les consommateurs.

Ces économies aident à réduire la combustion des énergies fossiles et la pollution au gaz carbonique associée, qui

contribue au réchauffement de la planète. Si toutes les familles américaines remplaçaient leurs téléviseurs et leurs

magnétoscopes par des modèles ENERGY STAR , les émissions de gaz carbonique seraient réduites de cinq millions

de tonnes par an — ce qui reviendrait à éliminer la pollution émise par plus d’un million de voitures.

En utilisant les produits ENERGY STAR , vous économiserez également de l’argent sur vos factures d’électricité et

vous utiliserez moins d’énergie. Un peu de bon sens économique au profit de notre environnement !

POUR REDUIRE LE RISQUE D’INCENDIE OU D’ELECTROCUTION,

N’EXPOSEZ PAS CET EQUIPEMENT A DES ENDROITS TRES HUMIDES.

AVERTISSEMENT:

Le symbole de la foudre sous

forme de flèche dans un triangle

est supposé indiquer

l’utilisateur que les pièces

internes au produit constituent

un risque d’électrocution.

ATTENTION : POUR REDUIRE LE RISQUE

D’ELECTROCUTION,

NE RETIREZ PAS LE CAPOT (OU LE PANNEAU ARRIERE).

L’APPAREIL NE CONTIENT AUCUNE PIECE A ENTRETENIR

PAR L’UTILISATEUR.

Le symbole du point d’exclamation

dans un triangle est supposé

indiquer à l’utilisateur que des

instructions de fonctionnement et

de maintenance importantes se

trouvent dans la documentation

fournie avec l’équipement.

CONSULTEZ UN PERSONNEL QUALIFIE POUR

LA MAINTENANCE.

“Note à l’intention de l’installateur du système CATV :Ce rappel est fourni afin d’attirer l’attention de l’installateur

de système CATV sur l’article 820-40 du National Electrical Code qui indique les règles de mise à la terre

appropriée et, en particulier, spécifie que la ligne de terre doit être connectée au réseau commun de mise à

la terre du bâtiment, au point le plus proche possible de la source.”

36F630(53-55)

03.3.5, 3:10 PM

Dimension: 140mm x 215mm

Download from Www.Somanuals.com. All Manuals Search And Download.

INFORMATIONS IMPORTANTES (Suite)

AVERTISSEMENT - Les réglementations FCC établissent que des changements ou des modifications non

autorisés sur cet équipement et non approuvés expressément par le fabricant peuvent annuler tout pouvoir

de l’utilisateur sur le fonctionnement de cet équipement.

MISE AU REBUT DU PRODUIT

Ce produit utilise un tube à rayons cathodiques (TRC) contenant du plomb à braser et du brasage tendre.

La mise au rebut de ces matières peut être réglementée pour des raisons environnementales. Pour toute

information sur la mise au rebut ou le recyclage, contactez les autorités locales ou les précautions importantes

préconisées par la société Electronics Industries Alliance sur : www.eiae.org.

ATTENTION: Ne placez pas le cordon d’alimentation sous le téléviseur ou sous tout autre objet lourd.

PRÉCAUTIONS IMPORTANTES

ATTENTION :Veuillez lire toutes ces instructions avant d’utiliser votre télévision et conservez-

les pour un usage ultérieur.

L’énergie électrique peut exécuter de nombreuses fonctions utiles. Cet appareil a été conçu et fabriqué de façon

à garantir votre entière sécurité. CEPENDANT, TOUTE UTILISATION INADEQUATE PEUT ENTRAINER DES

RISQUES D’ELECTROCUTION OU D’INCENDIE.Afin de ne pas détruire les protections intégrées à cet appareil,

respectez les règles de base suivantes pour son installation, son utilisation et sa maintenance.

Débranchez la télévision avant de la nettoyer.

N’utilisez pas de nettoyants liquides ou d’aérosols et utilisez un chiffon humide.

N’utilisez pas d’accessoires déconseillés par le fabricant de matériel vidéo, car ils impliquent des risques.

N’utilisez pas cette télévision à proximité d’eau — par exemple, près d’une baignoire, d’un lavabo, d’un

évier ou d’un bac à laver, dans une cave humide ou près d’une piscine, etc.

Ne placez pas cet équipement sur un chariot, un support ou une table instable. La télévision peut tomber

et provoquer de graves lésions à toute personne et causer de sérieux dommages à l’équipement. Utilisez

uniquement un support ou un chariot recommandé par le fabricant ou vendu avec la

télévision.

L’ensemble télévision-chariot doit être déplacé délicatement. Les arrêts brusques, une

force excessive et des surfaces inégales peuvent renverser l’ensemble.

L’installation au mur ou sur une tablette doit être réalisée conformément aux instructions

du fabricant et à l’aide d’un kit de montage approuvé par ce dernier.

Les fentes et les ouvertures du châssis à l’arrière ou dans la partie inférieure sont prévus pour la ventilation.

Pour garantir un fonctionnement fiable de la télévision et pour la protéger de toute surchauffe, ces ouvertures

ne doivent être ni obturées, ni recouvertes. La télévision ne doit pas être placée dans un endroit encastré

tel qu’une bibliothèque, sauf si une ventilation adéquate est prévue.

Les ouvertures ne doivent jamais être recouvertes par un chiffon ou autre et celles de la partie inférieure

ne doivent jamais être obturées si vous placez la télévision sur un lit, un sofa, un tapis ou toute surface

similaire. Cette télévision ne doit être placée ni à proximité d’un radiateur ou d’un registre de chaleur, ni

dessus.

10. Cette télévision doit être alimentée uniquement par le type d’alimentation électrique indiqué sur l’étiquette.

Si vous n’êtes pas sûr du type d’alimentation de votre domicile, consultez votre revendeur de télévision

ou la compagnie d’électricité locale (EDF en France).

Pour la télévision conçue pour fonctionner sur batterie, reportez-vous au mode d’emploi.

11. Du point de vue de la sécurité, la télévision est équipée d’une fiche polarisée à 2 fils (une lame plus

importante que l’autre). La fiche polarisée à 2 fils ne pénètre dans la prise électrique que dans un seul

sens.

Si la fiche ne correspond pas à la prise, demandez à votre électricien de remplacer la prise, elle doit être

obsolète. Ne modifiez pas la fiche et ne désactivez pas cette fonction de sécurité.

12. Ne posez rien sur le cordon d’alimentation. Ne placez pas la télévision dans un emplacement où le

cordon d’alimentation est susceptible d’être endommagé par le passage répété de personnes.

36F630(53-55)

03.3.5, 3:10 PM

Dimension: 140mm x 215mm

Download from Www.Somanuals.com. All Manuals Search And Download.

PRÉCAUTIONS IMPORTANTES (suite)

13. Respectez tous les avertissements et instructions mentionnés sur la télévision.

14. Si une antenne extérieure est raccordée à la télévision, veillez à ce que le système d’antenne soit relié à

la terre de façon à fournir une protection vis-à-vis des poussées de tension et des charges électrostatiques

accumulées. La section 810 du National Electrical Code fournit des informations relatives à une mise à la

terre correcte de la potence et de la structure portante, à une mise à la terre du fil d’entrée à une unité de

décharge d’antenne, aux dimensions des conducteurs de terre, à l’emplacement de l’unité de décharge

d’antenne, au raccordement des prises de terre ainsi qu’à leurs exigences.

EXEMPLE DE MISE À LA TERRE D’UNE ANTENNE

SELON LE CODE NATIONAL DE L’ÉLECTRICITÉ

DESCENTE

D’ANTENNE

COLLIER DE MISE

À LA TERRE

UNITÉ DE DÉCHARGE

D’ANTENNE

BOÎTIER DE

(NEC SECTION 810-20)

LA COMPAGNIE

D’ÉLECTRICITÉ

CONDUCTEURS DE TERRE

(NEC SECTION 810-21)

COLLIERS DE MISE À LA TERRE

ÉLECTRODE DE TERRE DE

LA COMPAGNIE D’ÉLECTRICITÉ

(NEC ART. 250, PARTIE H)

NEC – CODE NATIONAL DE L’ÉLECTRICITÉ

15. Pour tout ajout de protection à votre télévision en cas de foudre ou lorsque elle reste en veille et inutilisée

pendant de longues périodes, débranchez-la et déconnectez l’antenne.Vous éviterez ainsi des dommages

à votre équipement suite à la foudre et des poussées de tension.

16. Un système d’antenne extérieure ne doit pas être situé à proximité de lignes aériennes ou d’autres

groupes électrogènes ou circuits électriques ou dans des emplacements où l’antenne pourrait tomber sur

ce type de lignes ou circuits. Lors de l’installation d’un système d’antenne extérieure, faites extrêmement

attention à ne pas entrer en contact avec ces lignes ou circuits, car cela pourrait vous être fatal.

17. Ne surchargez pas les prises et les prolongateurs de ligne afin d’éviter tout risque d’incendie ou

d’électrocution.

18. N’introduisez jamais d’objets à travers les fentes du châssis, car ils pourraient entrer en contact avec des

points de tension dangereux ou des pièces court-circuitées et provoquer ainsi un incendie ou une

électrocution. Ne répandez jamais de liquides sur la télévision.

19. N’essayez pas de réparer vous-même votre télévision. L’ouverture ou le retrait des capots peut vous

exposer à une tension dangereuse ou à d’autres risques. Confiez toutes les opérations de maintenance

à un personnel qualifié.

20. Lorsque vous êtes confronté aux situations suivantes, débranchez la télévision et confiez toutes les

opérations de maintenance à un personnel qualifié :

A. lorsque le cordon d’alimentation ou la fiche est endommagé ou effiloché ;

B. si du liquide a été répandu sur/dans la télévision ;

C. si la télévision a été exposée à la pluie ou à l’eau ;

D. si la télévision ne fonctionne pas normalement même en respectant le mode d’emploi. Réglez

uniquement les commandes abordées par le mode d’emploi. Des réglages inappropriés d’autres

commandes peuvent occasionner des dommages et nécessiteront ensuite, dans la plupart des cas,

une intervention plus importante d’un technicien qualifié pour que la télévision fonctionne

normalement ;

E. si la télévision a été renversée ou que le châssis est endommagé ;

F. lorsque la télévision présente une altération visible des performances — cela indique un besoin de

maintenance.

21. Pour toute maintenance ou réparation de la télévision, demandez au technicien de réaliser des contrôles

de sécurité classiques afin de déterminer si la télévision est en bon état de marche.

22. Lorsqu’un remplacement de pièces se révèle nécessaire, veillez à ce que le technicien utilise des pièces

de rechange spécifiées par le fabricant et qu’elles aient les mêmes caractéristiques que la pièce d’origine.

Des remplacements non autorisés peuvent occasionner un incendie, une électrocution ou d’autres risques.

36F630(53-55)

03.3.5, 3:10 PM

Dimension: 140mm x 215mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Référence rapide sur les commandes

Nomenclature

Panneau Avant

(FRANÇAIS)

•

PRISES D’ENTRÉE

VIDÉO/AUDIO

(DERRIERE LE VOLET)

POWER

–

VOL

ALIMENTATION (POWER)

Appuyer → Pour mettre

sous tension.

PULL-OPEN

Appuyer de nouveau → Pour mettre

POWER

–

VOL

Canal HAUT/BAS

hors tension.

(a) Sélectionne le canal supérieur

suivant.

CAPTEUR DE

TÉLÉCOMMANDE

(s) Sélectionne le canal inférieur

précédent.

RÈGLAGE (MENU)

AUGMENTATION/RÉDUCTION

DU VOLUME SONORE (VOL)

(k) Pour augmenter le volume du son.

(l) Pour diminuer le volume du son.

Appuyer → Pour mettre sous tension.

Appuyer de nouveau → Pour mettre hors

tension.

Fonctions de base de la télécommande

Fenêtre d’émission du signal infrarouge

ALIMENTATION (POWER)

Appuyer → Pour mettre sous tension.

Appuyer de nouveau → Pour mettre hors

tension.

Touches de mode CATV/DVD-TV/VCR

Appuyer sur la touche TV/VCR → Les signaux

envoyés sont destinés à commander le

téléviseur et le magnétoscope.

Appuyer sur la touche CATV/DVD → Les

signaux envoyés sont destinés à commander

le Convertisseur de télévision par câble et le

magnétoscope.

PAVE NUMERIQUE DE COMMANDE A

DISTANCE (REMOTE KEYPAD)

Sélectionne directement le canal voulu

sur le pavé numérique.

RETOUR (FLASHBACK)

Rappelle le canal regardé précédent.

AFFICHAGE (DISPLAY)

Appuyer pour afficher le canal reçu pendant

quatre secondes.

Appuyer de nouveau pour faire disparaître

le canal.

PREFERENCES PERSONNELLES

Grâce aux touches de préférence personnelle,

vous pouvez programmer vos programmes

préférés à l’aide des 4 catégories:

A, B, C et D. Ces touches vous permettent

d’accéder rapidement à ces canaux. (Voir page 32)

•

Pour afficher temporairement le canal reçu

en mode Sous-titres.

ENTRÉE (INPUT)

Appuyer → Pour sélectionner le mode

ENTRÉE 1 vidéo externe.

Appuyer 2 fois → Pour sélectionner le mode

ENTRÉE 2 vidéo externe.

Appuyer 3 fois → Pour sélectionner le mode

ENTRÉE 3 vidéo externe ou le mode COM-

POSANT.

Appuyer 4 fois → Pour revenir au mode TV

initial (Voir page 39).

AUGMENTATION/RÉDUCTION DU

VOLUME SONORE (VOLUME UP/DOWN)

(k) Pour augmenter le volume du son.

(l) Pour diminuer le volume du son.

•

Modifie ou sélectionne les réglages TV sur

l’affichage sur écran.

RÉGLAGE (MENU)

Appuyer → Accès au MENU PRINCIPAL.

Appuyer de nouveau → Sortie du MENU

PRINCIPAL.

ENTRER (ENTER)

SOURDINE (MUTE)

Parfois utilisée lorsqu’un convertisseur nécessite

l’introduction d’une commande “enter” après la sélection

de canaux à l’aide du pavé numérique de commande à

distance. (Voir page 41)

Appuyer → Mise en sourdine du son.

Appuyer de nouveau → Rétablissement du son.

•

Lorsque le son est coupé, SOUS-TITRE

apparaît si la fonction est disponible.

TOUCHES DES CANAUX CROISSANT/

DÉCROISSANT (CHANNEL UP/DOWN)

(a) Sélectionne le canal supérieur suivant.

(s) Sélectionne le canal inférieur précedént.

ALIMENTATION (DVD/VCR)

[POWER (DVD/VCR)]

Appuyer → Pour mettre sous tension.

Appuyer de nouveau → Pour mettre hors tension.

•

Voir pages 28–30 pour prérégler les

canaux.

COMMANDE DU LECTEUR DE

DVD/MAGNÉTOSCOPE

(Voir page 41)

•

Déplace le curseur “ E ” sur l’écran du

MENU.

SKIP/VCR-CH

(Voir page 41)

REC

(Voir page 41)

Remarque:

•

Les boutons ombrés de la télécommande illustrés ci-dessus brillent dans l’obscurité lorsque la télécommande a

été placée sous une ampoule fluorescente ou toute autre source lumineuse.

•

Le matériau phosphorescent n’est absolument pas toxique ou radioactif. Il peut donc être utilisé en toute sécurité.

Le degré d’illumination variera en fonction de l’intensité de la source d’éclairage.

Le degré d’illumination diminuera avec le temps, en fonction de la température.

Le temps requis pour charger les touches phosphorescentes dépendra de l’éclairage environnant.

Les rayons directs du soleil et les luminaires fluorescents constituent les meilleures sources de chargement des

touches phosphorescentes.

36F630(56-57)

03.3.5, 3:11 PM

Dimension: 140mm x 215mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Avand d’appeler un réparateur

Vérifier les points suivants afin de déterminer s’il est possible de remédier au problème par un simple réglage des commandes.

LISTE DES

VÉRIFICATIONS

POUR UN

DÉPANNAGE

RAPIDE

SOLUTION POSSIBLE

Essayer un nouveau canal. S’il fonctionne, il s’agil

ptobablement d’une panne de la chaîne.

X X

X X X

Le téléveseur est-il branché?

La prise secteur fonctionne-t-elle?

X X

L’interrupteur POWER du téléviseur est-il sous

tension?

X X

X X X

X X

L’antenne est-elle raccordée aux bomes à l’arrière

de l’appareil?

Si l’antenne extérieure est utilisée, s’assurer qu’il

n’y a pas de fils sectionnés.

X X

X X X

X X

Vérifiers’iln’yapasd’interférencelocateoudebruit

électrique extérieur.

Mettre l’interrupteur POWER hors tension puis de

nouveau sous tension au bout d’une minute.

X X

X X X

X X

Régler la commande de COULEUR.

Régler la commande de CONTRASTE.

Vérifier l’appareil vidéo/audio exterme : s’asseurer

que les câbles de connexion ne sont pas desserrés

ou cassés.

X X

X X X

X X

Vérifier les piles de la télécommande.

X X

X X X

X X

Appuyez sur la touche TV/VCR de la télécommande

pour sélectionner le mode TV.

Les câbles audio sont-ils femement connectés?

Vérifier le nivear du volume.

X X

X X X

Les haut-parleurs fonctionnent-ils?

X X

Mettre le mode sous-titrage hors service “ARRÊT”

Mode d’économie d’énergie sur “ARRÊT”.

Débrancherletéléviseuretlerebrancheraprèsdeux

minutes.

X X

X X X

X X

Remarque:

• En mode TEXTE, s’il n’y a pas d’émission TEXTE àrecovoir, l’écran

du téléviseur pourrait être sombre et vide. Dans ce cas, placer la

mode Sous-titrage hors service.

(Image sombre et vide)

Appel au service après-vente

Pour connaître l’emplacement du centre de service après-vente agréé Sharp le plus proche ou pour

obtenir de la documentation sur les produits, des accessoires, des consommables ou une aide au

consommateur, appelez le 1-800-BE-SHARP.

36F630(56-57)

03.3.5, 3:11 PM

Dimension: 140mm x 215mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Limited Warranty

CONSUMER LIMITED WARRANTY

SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp

brand product (the “Product”), when shipped in its original container, will be free from defective

workmanship and materials, and agrees that it will, at its option, either repair the defect or replace the

defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser

for parts or labor for the period(s) set forth below.

This warranty does not apply to any appearance items of the Product nor to the additional excluded

item(s) set forth below nor to any Product the exterior of which has been damaged or defaced, which

has been subjected to improper voltage or other misuse, abnormal service or handling, or which has

been altered or modified in design or construction.

In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth

below and provide proof of purchase to the servicer.

The limited warranty described herein is in addition to whatever implied warranties may be granted to

purchasers by law. ALL IMPLIED WARRANTIES INCLUDING THE WARRANTIES OF

MERCHANTABILITY AND FITNESS FOR USE ARE LIMITED TO THE PERIOD(S) FROM THE DATE

OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied

warranty lasts, so the above limitation may not apply to you.

Neither the sales personnel of the seller nor any other person is authorized to make any warranties

other than those described herein, or to extend the duration of any warranties beyond the time period

described herein on behalf of Sharp.

The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall

be the sole and exclusive remedy available to the purchaser. Correction of defects, in the manner and

for the period of time described herein, shall constitute complete fulfillment of all liabilities and

responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full satisfaction

of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp

be liable or in any way responsible, for any damages or defects in the Product which were caused by

repairs or attempted repairs performed by anyone other than an authorized servicer. Nor shall Sharp be

liable or in any way responsible for any incidental or consequential economic or property damage.

Some states do not allow the exclusion of incidental or consequential damages, so that above exclusion

may not apply to you.

THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS.YOU MAY ALSO HAVE OTHER RIGHTS

WHICH VARY FROM STATE TO STATE.

Model Specific Section

Your Product Model Number & Description:

Warranty Period for this Product:

36F630, 36 inch Color Television (Be sure to have

this information available when you need service for

your Product.)

One (1) year parts and labor. The warranty period

continues for an additional one (1) year, for a total

of two (2) years, with respect to the picture tube(s)

in the Product for parts only. Labor and service are

not provided free of charge for this additional period.

Additional Item(s) Excluded from

Warranty Coverage (if any):

Non-rechargeable batteries.

Where to Obtain Service:

From a Sharp Authorized Servicer located in the

United States. To find the location of the nearest

Sharp Authorized Servicer, call Sharp toll free at 1-

800-BE-SHARP.

What to Do to Obtain Service:

Contact your Sharp Authorized Servicer to obtain

in-home service for this Product. The Servicer will

come to your home and if it is necessary to remove

the Product, the Servicer will reinstall it. Be sure to

have Proof of Purchase available.

TO OBTAIN ACCESSORY OR PRODUCT INFORMATION, CALL 1-800-BE-SHARP OR VISIT www.sharpusa.com

36F630(58-60)

03.3.5, 3:11 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Note

36F630(58-60)

03.3.5, 3:11 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

SHARP ELECTRONICS CORPORATION

Sharp Plaza, Mahwah, New Jersey 07430-2135

Printed in Mexico

TINS-A679WJZZ

03P05-MMG(J)

36F630(58-60)

03.3.5, 3:11 PM

Dimension: 140 X 215 mm

Download from Www.Somanuals.com. All Manuals Search And Download.

Shure Headphones 565d User Manual
Sony Camera Lens DH1730 User Manual
Sony Camera Lens DSC W200 User Manual
Sony Speaker XS V1331 User Manual
Sony Stereo System STR SL500 User Manual
Star Manufacturing Toaster 526TOA User Manual
Sterling Plumbing Product E045000 User Manual
Studer Innotec Battery Charger HPC4024 User Manual
Sylvania Flat Panel Television LD370SC8 S User Manual
Tannoy Cell Phone V640I User Manual