model
32N-S500
As an ENERGY STAR ® Partner, SHARP has determined that this product meets the ENERGY STAR ® guidelines for energy efficiency.
ENERGY STAR ® is a U.S. registered trademark.
CONTENTS
PAGE
PAGE
• Parent Control .................................................................. 15 - 19
• V-Chip............................................................................ 15 - 19
• View Timer .............................................................................19
• Energy Save.............................................................................20
• Set Up .............................................................................. 20 - 23
• EZ Setup ....................................................................... 20 - 21
• Channel Setting ............................................................. 21 - 22
• Universal Plus Function.........................................................22
• Personal Preference..............................................................23
• Blue Screen ...........................................................................23
• PIP (2 Tuner Picture In Picture)................................................24
• Using the Video and Audio Input Jacks....................................25
• Using the Audio Output Jacks ..................................................26
• Operation of Remote Control ........................................... 27 - 30
• Before Calling for Service ........................................................31
• Calling for Service ....................................................................40
• Limited Warranty ......................................................................40
• Important Information ................................................................ 2
• Important Safeguards........................................................... 2 - 3
• Outstanding Features................................................................ 4
• Supplied Accessories ................................................................ 5
• Before Operating Your Television .............................................. 5
• Antenna Connections ................................................................ 6
• Quick Reference Control Operation ..................................... 7 - 9
• Menu Functions....................................................................... 10
• EZ SETUP during First Power On ............................................11
• Language ................................................................................. 11
• Sleep Timer ............................................................................. 12
• Closed Caption........................................................................ 12
• Video Adjust ............................................................................ 13
• Audio Adjust ..................................................................... 13 - 14
This operating manual includes basic operating instructions in
Spanish and French.
SPANISH is on page 8, 32.
FRENCH is on page 9.
7020 ME
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safeguards
CAUTION: Please read all of these instructions before you operate your television and save these intructions for later use.
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your personal safety. BUT
IMPROPER USE CAN RESULT IN POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARDS. In order not to defeat the safeguards incorporated
in this equipment, observe the following basic rules for its installation, use and servicing.
1. Unplug this television equipment from the wall outlet before cleaning.
2. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
3. Do not use attachments not recommended by the television equipment manufacturer as they may cause hazards.
4. Do not use this television equipment near water — for example, near a bathtub, washbowl, kitchen sink or laundry tub, in a wet basement,
or near a swimming pool, etc.
5. Do not place this equipment on an unstable cart, stand, or table. The television equipment may fall, causing serious injury to a child or an
adult, and serious damage to the equipment. Use only with a cart or stand recommended by the manufacturer or sold with the television
equipment.
6. Television equipment and cart combination should be moved with care. Quick stops, excessive force, and uneven surfaces may
cause the equipment and cart combination to overturn.
7. Wall or shelf mounting should follow the manufacturer’s instructions, and should use a mounting kit approved by the manufacturer.
8. Slots and openings in the cabinet and the back or bottom are provided for ventilation. To insure reliable operation of the television equipment
and to protect it from overheating, these openings must not be blocked or covered. This television equipment should not be placed in a built-
in insulation such as a bookcase unless proper ventilation is provided.
9. The openings should never be covered with a cloth or other material, and the bottom openings should not be blocked by placing the television
equipment on a bed, sofa, rug, or other similar surface. This television equipment should never be placed near or over a radiator or heat
register.
10. This television equipment should be operated only from the type of power source indicated on the marking label. If you are not sure of the
type of power supplied to your home, consult your television dealer or local power company.
For television equipment designed to operate from battery power, refer to the operating instructions.
11. As a safety feature, television equipment is equipped with a 2-wire polarized plug (one plug blade bigger than the other). The 2-wire polarized
plug will fit only one way into the power outlet.
If the plug does not fit, ask your electrician to replace your obsolete outlet. Do not modify the plug and defeat this safety feature.
12. Do not allow anything to rest on the power cord. Do not locate this television equipment where the cord will be abused by persons walking
on it.
13. Follow all warnings and instructions marked on the television equipment.
14. If an outside antenna is connected to the television equipment, be sure the antenna system is grounded so as to provide some protection
against voltage surges and built-up static charges. Section 810 of the National Electrical Code provides information with respect to proper
grounding of the mast and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding conductors,
location of antenna-discharge unit, connection to grounding electrodes, and requirements for the grounding electrode.
EXAMPLE OF ANTENNA GROUNDING
ACCORDING TO NATIONAL ELECTRICAL CODE.
ANTENNA LEAD-IN WIRE
GROUND CLAMP
ANTENNA DISCHARGE UNIT
(NEC SECTION 810-20)
ELECTRIC
GROUNDING CONDUCTORS
(NEC SECTION 810-21)
SERVICE
EQUIPMENT
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODE SYSTEM
(NEC PART 250, PART H)
NEC - NATIONAL ELECTRICAL CODE
15. For added protection for this television equipment during a lightning storm, or when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna. This will prevent damage to the equipment due to lightning and power-line surges.
16. An outside antenna system should not be located in the vicinity of overhead power lines or other electric light or power circuits, or where it
can fall into such power lines or circuits. When installing an outside antenna system, extreme care should be taken to keep from touching
such power lines or circuits as contact with them might be fatal.
17. Do not overload wall outlets and extension cords as this can result in fire or electric shock.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Important Safeguards (Continued)
18. Never push objects of any kind into this television equipment through cabinet slots as they may touch dangerous voltage points or short out
parts that could result in a fire or electric shock. Never spill liquid of any kind on the television equipment.
19. Do not attempt to service this television equipment yourself as opening or removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
20. Unplug this television equipment from the wall outlet and refer servicing to qualified service personnel under the following conditions:
A. When the power cord or plug is damaged or frayed.
B. If liquid has been spilled into the television equipment.
C. If the television equipment has been exposed to rain or water.
D. If the television equipment does not operate normally by following the operating instructions. Adjust only those controls that are covered
by the operating instructions as improper adjustment of other controls may result in damage and will often require extensive work by a
qualified technician to restore the television equipment to normal operation.
E. If the television equipment has been dropped or the cabinet has been damaged.
F. When the television equipment exhibits a distinct change in performance — this indicates a need for service.
21. Upon completion of any service or repairs to this television equipment, ask the service technician to perform routine safety checks to
determine that the television is in safe operating condition.
22. When replacement parts are required, be sure the service technician has used replacement parts specified by the manufacturer that have
the same characteristics as the original part. Unauthorized substitutions may result in fire, electric shock, or other hazards.
Outstanding Features
• V-CHIP FUNCTION
This function allows you to restrict TV programs and also allows you to control TV usage based on FCC data. This function is to prevent your children
from watching violence or sexual scenes that are harmful to youth.
• PICTURE IN PICTURE
The two built-in tuners enable you to watch two TV programs at the same time, one on the main picture and one on an inset while commercial
messages are on the screen..
• DARKER-TINTED PICTURE TUBE
The darker tint makes black look blacker for greater contrasts and richer colors. These features combine to provide you with a beautiful, easily viewed
picture.
• S-VIDEO INPUT TERMINALS
TheS-VideoinputterminalallowsconnectiontoanS-VHSVCRorothervideoequipmentwithanS-Videooutputterminalforcrisp, clearreproduction
of images.
• FRONT VIDEO/AUDIO INPUT JACKS
Additional Video/Audio input Jacks are located on the front of your set, so it is easier for you to connect camcorders, TV games and other video
equipment.
• UNIVERSAL REMOTE CONTROL
This infrared remote control operates your TV set, and can control a variety of VCRs and CATV converter boxes.
• UNIVERSAL PLUS FUNCTION
The unit will select the suitable input mode automatically when the VCR PLAY button on the UNIVERSAL REMOTE CONTROL is pressed.
• VARIABLE AUDIO OUTPUT (VAO)
The VAO offers TV remote control over separate audio equipment volume that can raise or lower the audio equipment volume.
• ENERGY SAVE
Whenthisfeatureisturnedon,itreducesthebrightnessoftheTVtoalevelthatconsumesapproximately20percentlessenergythanwhenthefeature
is turned off.
• BUILT-IN MULTICHANNEL TV SOUND (MTS) CIRCUIT &
® (Sound Retrieval System)
This circuit allows reception of stereo or bilingual TV sound. The SRS feature adds a three dimensional quality to stereo so the audio is more like
a live performance (see page 13 for details).
• VIEWING TIMER
This function can be used to prevent your children from watching too much TV.
• TRILINGUAL MENU ON SCREEN DISPLAY
For your convenience you can easily select the MENU ON SCREEN DISPLAY in ENGLISH, SPANISH or FRENCH.
• CLOSED CAPTION DECODER
Allows you to view conversations, narration and sound effects from TV programs or pre-recorded video tape as subscript on your TV screen.
• SLEEP TIMER
For convenient viewing, the Sleep Timer automatically shuts off the set in preselected periods of up to 120 minutes. This Timer can be set at 30, 60,
90 or 120 minute intervals.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Supplied Accessories
POWER
TV
VCR
INPUT
1
4
7
2
5
8
0
3
6
9
FLASHBACK
ENTER
100
PERSONAL PREFERENCE
A
B
C
D
CH
CH
VOL
—
VOL
+
MENU
CATV
TV
REW
PLAY
FF
VCR CH
PAUSE STOP
REC
PIP
CM SKIP DISPLAY MUTE
SWAP FREEZE
MOVE
SELECT
TV • VCR • CATV
Infrared Remote Control
Part Number : RRMCG1494CESA
Size AA
Dry Batteries (2pcs.)
Before Operating Your Television
Location
• For normal operation, your TV should be located in an area of the room where cool, adequate ventilation is provided. Do not place the back
of the television set in a place where free airflow will be restricted.
• Any magnetic force may disturb the color picture. Make sure that magnets, electric clocks, toys using magnets or any other magnetic
substance, such as iron are kept well away from this TV set.
Power
Your TV operates on 120 Volts, 60 Hertz (normal household current) and has a polarized plug. If you are unable to insert the plug fully into the
outlet, try reversing the plug. Should it fail to fit, contact an electrician. Do not defeat the safety feature of the polarized plug.
NOTE:
• If the set will not be used for a long period, such as during a vacation, unplug the set from the wall outlet to economize power. (If the TV set
is plugged in, slight current still flows, even with the POWER BUTTON in the OFF position.
• Lines and other noise may appear in TV broadcast images when an FM tuner or radio is located near the TV and both radio and TV
broadcasts are being received. Should such noise appear, turn off either the TV or the radio.
• If you are listening to the AM broadcasts, turn the TV off. AM broadcast signals may not be received due to the interference of the TV.
Before using the television, prepare the Remote Control.
To use the remote control, insert batteries first.
Insert the batteries
• With your thumbnail, pull up the slit as indicated by the arrow to
remove the back cover. Insert two batteries (size “AA”). Be sure
to match the battery e/d terminals with the e/d marks inside
the compartment.
Pull up
Battery
Cover
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Antenna Connections
Antennas
• The antenna requirements for good color television reception are more important than those for black & white television reception. For this
reason, a good quality outdoor antenna is strongly recommended.
The following is a brief explanation of the type of connections that are provided with the various antenna systems:
F-type connector
1. A 75 ohm system is generally a round cable with F-type connector that can easily be
attached to a terminal without tools. The F-type connector should be finger tightened
only.
75-ohm coaxial cable (round)
2. A 300 ohm system is a flat “twin-lead” cable that can be attached to a 75 ohm terminal
through a 300-75 ohm ADAPTOR (not supplied).
300-ohm twin-lead cable (flat)
OUTDOOR ANTENNA CONNECTION
• Use one of the following two diagrams if you connect an outdoor antenna.
A: Using a VHF/UHF combination outdoor antenna.
B: Using separate VHF and/or UHF outdoor antenna.
• Connect an outdoor antenna cable lead-in to the COAXIAL CABLE CONNECTOR on the rear of the TV set.
A. Combination VHF/UHF Antennas
B. Separate VHF/UHF Antenna
REAR OF TV
VHF/UHF ANTENNA
300/75-ohm
ADAPTOR
(not supplied)
300-ohm
twin-lead
VHF
UHF
or
ANTENNA ANTENNA
VHF/UHF
ANTENNA
VCR Pus+, C3, AllSet, PlusCode and GUIDE Plus+ are trademarks
of Gemstar Development Corporation. The VCR Plus+ and GUIDE
Plus+ systems are manufactured under license from Gemstar
Development Corporation and VCR Index
S
y
s
t
e
m
s
B
.
V
.
,
r
e
s
p
e
c
t
i
v
e
l
y
.
©
1
9
9
0
G
D
C
©
1
9
9
7
I
S
I
5,307,173 and 5,335,079
ANT/
CABLE
75Ω
E
i
t
h
e
r
t
h
e
S
-
V
I
D
E
O
o
r
t
he VIDEO terminal can be used,
but the S-VIDEO overrides the VIDEO terminal.
LINE IN
IN
LINE
OUT
COMPONENT-IN
IN
1
3
VIDEO
Y
S-VIDEO
IN
IN
1
3
L
P
(CB
L
300-ohm
B)
AUDIO
R
(CR
R
)
P
R
twin-lead
75-ohm
COMBINER
(not supplied)
coaxial
cable
ANT/
CABLE
75Ω
300-ohm
twin-lead
ANT/
CABLE
75Ω
IN OUT
VCR Pus+, C3, AllSet, PlusCode and GUIDE Plus+ as
of Gemstar Development Corporation. The VCR PluaGUD
Plus+ systems are manufactured under license from Gemstar
Development Corporation and VCR Index Systems B.V., respectively
.
75-ohm coaxial
cable
'
1
9
9
0
G
D
C
'
1
9
9
7
I
S
I
5,307,173 and 5,335,079
ANT/
CABLE
75Ω
E
i
t
h
e
r
t
h
e
S
-
V
I
D
E
O
o
r
t
he VIDEO terminal can be used,
but the S-VIDEO overrides the VIDEO terminal.
LINE IN
IN
LINE
OUT
COMPONENT-IN
IN
1
3
or
VIDEO
Y
S-VIDEO
IN
IN
1
3
L
P
L
(CB
B
)
AUDIO
R
P
(CR
R
R)
REAR OF TV
CABLE TV (CATV) CONNECTION
• A 75 ohm coaxial cable connector is built into the set for easy hookup. When connecting the 75 ohm coaxial cable to the set, screw the 75
ohm cable to the COAXIAL CABLE CONNECTOR.
• Some cable TV companies offer “premium pay channels”. Since the signals of these premium pay channels are scrambled, a cable TV
converter/descrambler is generally provided to the subscriber by the cable TV company. This converter/descrambler is necessary for
normal viewing of the scrambled channels. (Set your TV on channel 3 or 4. Typically one of these channels is used. If this is unknown,
consult your cable TV company.) For more specific instructions on installing cable TV, consult your cable TV company. One possible
method of utilizing the converter/descrambler provided by your cable TV company is explained below.
Please note: RF switch equipped with position A/B (not provided) is required.
“A” position on the RF switch (not supplied) : You can view all unscrambled channels using the TV’s channel keys.
“B” position on the RF switch (not supplied) : You can view the scrambled channels via the converter/descrambler using the converter’s
channel keys.
RF switch (not supplied)
Two-set
A
signal
OUT
IN
B
Cable TV Line
splitter
(not
supplied)
IN
OUT
Cable TV converter/
descrambler
(not supplied)
NOTE:
• Consult your SHARP Dealer or Service Center for the type of splitter, RF switch or combiner that might be required.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Quick Reference Control Operation
L Location of Controls
(ENGLISH)
Front Panel
POWER
–
VOL
+
POWER
VIEW TIMER
CH
MENU
POWER
Press → On.
Press again → Off.
VIDEO/AUDIO IN 2 TERMINALS
(VIDEO/AUDIO terminals are also provided on
the rear.)
POWER
–
VOL +
POWER
VIEW TIMER
CH
MENU
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
CHANNEL UP/DOWN – MENU
(8) Selects next higher channel.
(9) Selects next lower channel.
• Press both at the same time to access the
MAIN MENU screen.
LED
LED
SENSOR AREA FOR REMOTE CONTROL
Basic Remote Control Functions
Infrared Transmitter Window
POWER
Press → On.
Press again → Off.
INPUT
Press → Switch to external video INPUT 1
mode.
Press again → Switch to external video INPUT
2 mode.
POWER
TV
VCR
INPUT
REMOTE KEYPAD
Accesses any channel from keypad.
Press again → Switch to external video INPUT
FLASHBACK
Returns to previous channel.
1
4
7
2
5
8
0
3
6
9
3 mode.
Press again → Switch back to the original TV
mode.
See page 25.
PERSONAL PREFERENCE
With the Personal Preference buttons,
you can program your favorite programs by
using the four categories A, B, C and D. The
channels can be accessed quickly by using
these buttons. (See page 23.)
FLASHBACK
ENTER
ENTER
100
Used in some instances where a VCR or Cable
Converter Box requires an “enter” command
after selecting channels, when using the
REMOTE KEYPAD button. (See page 27)
PERSONAL PREFERENCE
A
B
C
D
VOLUME UP/DOWN
(+) Increases sound.
(–) Decreases sound.
• In menu mode, changes or selects the TV
adjustments.
CH
CH
VOL
VOL
—
+
CHANNEL UP/DOWN
(8) Selects next higher channel.
(9) Selects next lower channel.
• See pages 21 - 22 for channel presetting.
• Moves the “ : ” mark of the MENU screens.
MENU
CATV
TV
TV-CATV MODE SELECT SWITCH
In TV position, sends power and channel select
commands (Channel up/down and Random
Access buttons) to the TV.
In CATV position, sends power and channel
select commands to a cable TV converter.
MENU
Press → Accesses MAIN MENU.
Press again → Exits MAIN MENU.
REW
PLAY
FF
VCR CH
PAUSE STOP
REC
MUTE
PIP
CM SKIP DISPLAY MUTE
Press → Mutes sound.
VCR CONTROL
See page 27.
Press again → Restores sound.
• CLOSED CAPTION appears when sound is
muted.
SWAP FREEZE
MOVE
SELECT
DISPLAY
Press → Display receiving channel for four
PIP FUNCTION
You can watch two pictures at the same time.
See page 24.
seconds.
TV • VCR • CATV
Press again → Displays remaining time of
SLEEP TIMER and VIEW TIMER.
Press again → Temporarily displays receiving
channel when in Closed Caption mode.
NOTE:
• The above shaded buttons on the Remote Control glow in the dark. To use the glow-in-the-dark display on the remote control, place it under
a fluorescent light or other lighting.
• The phosphorescent material contains no radioactive or toxic material, so it is safe to use.
• The degree of illumination will vary depending on the strength of lighting used.
• The degree of illumination will decrease with time and depending on the temperature.
• The time needed to charge the phosphorescent display will vary depending on the surrounding lighting.
• Sunlight and fluorescent lighting are the most effective when charging the display.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Referencia rápida de los controles de operación
L Ubicación de los Controles
(ESPAÑOL)
Front Delantero
TERMINALES DE ENTRADA
IN 2
POWER
–
VOL
+
POWER
VIEW TIMER
CH
VIDEO/AUDIO
ALIMENTACION
MENU
(POWER)
Pulsando → Enciende (On).
Pulsando nuevamente → Apaga (Off).
(Los terminales VIDEO/AUDIO también se
encuentran en la parte posterior)
Fr
POWER
–
VOL +
POWER
VIEW TIMER
CH
MENU
CANAL SUPERIOR/INFERIOR (CH) – MENU
AUMENTO/DISMINUCION DEL VOLUMEN
(VOL)
(+) Aumenta el sonido.
(8)Selecciona el siguiente canal superior.
(9)Selecciona el siguiente canal inferior.
• Pulse ambos al mismo tiempo para acceder
a la pantalla de MENU PRINCIPAL.
DIODO EMISOR DE LUZ
DIODO
EMISOR
DE LUZ
(–) Disminuye el sonido.
ZONA DEL SENSOR DEL
MANDO A DISTANCIA
Functiones Basicas Del Control Remoto
Funciones Basicas Del Control Remoto
Ventanilla del transmisor de infrarrojos
ALIMENTACION (POWER)
Pulsando → Enciende (On).
ENTRADA (INPUT)
Pulsando → Cambia al modo de entrada 1 del
vídeo externo.
Pulsando nuevamente → Cambia al modo de
entrada 2 del vídeo externo.
Pulsando nuevamente → Apaga (Off).
POWER
TECLADO A DISTANCIA (REMOTE KEYPAD)
Para tener acceso a cualquier canal emplean-
do las teclas.
TV
VCR
INPUT
Pulsando nuevamente → Cambia al modo de
entrada 3 del vídeo externo.
Pulsando nuevamente → Vuelve al modo TV
original.
RETORNO AL CANAL ANTERIOR
(FLASHBACK)
Para volver al canal anterior.
1
4
7
2
5
8
0
3
6
9
PREFERENCIAS PERSONALES
(PERSONAL PREFERENCE)
Con los botones Personal Preference puede pro-
gramar sus programas favoritos utilizando las
cuatro categorías A, B, C y D.
INTRODUCIR (ENTER)
Se utiliza en algunos casos en los cuales un
VCR o una Caja de Inversor de Cable requiere
una orden “enter” después de seleccionar los
canales, al usar el teclado a distancia.
FLASHBACK
ENTER
100
PERSONAL PREFERENCE
A
B
C
D
Puede acceder a los canales rápidamente utili-
zando estos botones.
CH
CH
CANAL SUPERIOR/INFERIOR
(CHANNEL UP/DOWN)
(8)Selecciona el siguiente canal superior.
(9)Selecciona el siguiente canal inferior.
• En el modo de MENU, mueve la marca “ : ”.
VOL
VOL
AUMENTO/DISMINUCION DEL VOLUMEN
(VOLUME UP/DOWN)
(+) Aumenta el sonido.
(–) Disminuye el sonido.
• En modo de MENU cambia o selecciona el
ajuste del televisor.
—
+
MENU
CATV
TV
PREPARACION (MENU)
Pulsando → Accede al MENU PRINCIPAL.
Pulsando nuevamente → Sale del MENU
PRINCIPAL.
CONMUTADOR SELECTOR DE TELEVISOR/TV
POR CABLE (TV-CATV)
REW
PLAY
FF
En la posición TV, el mando envia los coman-
dos de alimentación y selección de canales (bo-
tones de canal superior/inferior y de acceso
aleatorio) a un televisor.
En la posición CATV, envia los comandos de
alimentación y selección de canales a un con-
vertidor de TV por cable.
SILENCIAMIENTO (MUTE)
VCR CH
PAUSE STOP
REC
Pulsando → Silencia el sonido.
Pulsando nuevamente → Restaura el sonido.
• CLOSED CAPTION aparece automática-
mente cuando el sonido es silenciado.
Siempre y cuando la transmisión tenga esta
señal.
PIP
CM SKIP DISPLAY MUTE
SWAP FREEZE
MOVE
SELECT
CONTROLES DEL VIDEO
IMAGEN EN IMAGEN (FUNCTION PIP)
Se puede ver dos imágenes al mismo tiempo.
TV • VCR • CATV
VISUALIZACION (DISPLAY)
Pulsando → Aparece el canal de recepción
por cuatro segundos.
Pulsando nuevamente → Aparece el tiempo
restante del TEMPORIZADOR PARAAPAGAR
y del LIMITADOR.
• En el modo de “Closed Caption” se muestra
el canal de recepción por un corto tiempo.
NOTE:
• Los botones que arriba pueden verse sombreados en el Control Remoto lucen en la oscuridad. Para usar el visor del control remoto que
luce en la oscuridad, colocarlo bajo una luz fluorescente u otra fuente luminosa.
• El material fosforescente no contiene elementos radiactivos ni tóxicos, de modo que su uso no representa ningún peligro.
• El grado de iluminación variará de acuerdo con la potencia de la luz utilizada.
• El grado de iluminación irá decayendo con el tiempo y dependiendo de la temperatura.
• El tiempo necesario para cargar el visor fosforescente variará de acuerdo con la iluminación circundante.
• La luz del sol y la luz fluorescente son las más eficaces para la carga del visor.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Référence rapide sur les commandes
L Emplacement des touches
(FRANÇAIS)
Panneau avant
IN 2
PRISES D’ENTRÉE VIDÉO/AUDIO
POWER
–
VOL
+
POWER
VIEW TIMER
CH
(Les prises VIDÉO/AUDIO sont également
reprises à l’arrière.)
ALIMENTATION (POWER)
Appuyer pour mettre sous tension.
Appuyer de nouveau pour mettre hors tension.
MENU
POWER
–
VOL +
POWER
VIEW TIMER
CH
TOUCHES DES CANAUX
CROISSANT/DECROISSANT (CH) – MENU
(8)Sélectionne le canal supérieur suivant.
(9)Sélectionne le canal inférieur précédent.
• Appuyez simultanément sur ces deux
touches pour accéder à l’écran MENU
PRINCIPAL.
MENU
AUGMENTATION/RÉDUCTION DU VOLUME
SONORE (VOL)
(+) Pour augmenter le volume du son.
DEL
DEL
(–) Pour diminuer le volume du son.
ZONE DE DÉTECTION DU CAPTEUR
Fonctions de base de la télécommande
Fenêtre d’émission du signal infrarouge
ALIMENTATION (POWER)
Appuyer pour mettre sous tension.
Appuyer de nouveau pour mettre hors tension.
ENTRÉE (INPUT)
Appuyer pour sélectionner le mode ENTRÉE
1 vidéo externe.
Appuyer de nouveau pour sélectionner le mode
ENTRÉE 2 vidéo externe.
Appuyer de nouveau pour sélectionner le
mode ENTRÉE 3 vidéo externe.
Appuyer de nouveau pour revenir au mode TV
initial.
POWER
PAVÉ NUMÉRIQUE DE COMMANDE A
DISTANCE (REMOTE KEYPAD)
Sélectionne directement le canal voulu sur le
pavé numérique.
TV
VCR
INPUT
1
4
7
2
5
8
0
3
6
9
RETOUR (FLASHBACK)
Rappelle demier le canal regardé.
PRÉFÉRENCES PERSONNELLES
(PERSONAL PREFERENCE)
Grâce aux touches de préférence personnelle,
vous pouvez programmer vos programmes
préférés à l’aide des 4 catégories:
ENTRER (ENTER)
FLASHBACK
ENTER
Parfois utilisée lorsqu’un magnétoscope ou un
convertisseur nécessite l’introduction d’une
commande “enter” après la sélection de ca-
naux à l’aide du pavé numérique de comman-
de à distance.
100
PERSONAL PREFERENCE
A
B
C
D
A, B, C et D. Ces touches vous permettent
d’accéder rapidement à ces canaux.
CH
CH
VOL
—
VOL
+
TOUCHES DES CANAUX CROISSANT/
DÉCROISSANT (CHANNEL UP/DOWN)
(8) Sélectionne le canal supérieur suivant.
(9) Sélectionne le canal inférieur précedént.
• Déplace le curseur “ :” sur l’écran du MENU.
AUGMENTATION/RÉDUCTION DU
VOLUME SONORE (VOLUME UP/DOWN)
(+) Pour augmenter le volume du son.
(–) Pour diminuer le volume du son.
• Pour changer ou sélectionner les réglages
du téléviseur en mode menu.
MENU
CATV
TV
RÉGLAGE (MENU)
Appuyer → Accès au MENU PRINCIPAL.
Appuyer de nouveau → Sortie du MENU
PRINCIPAL.
SÉLECTEUR DE MODE TÉLÉVISION/
CÂBLOVISION (TV-CATV)
En position télévision (TV), permet de mettre
le téléviseur sous/hors tension et de
sélectionner ses canaux (touches de canaux
en ordre croissant/décroissant et d’accès
direct).
REW
PLAY
FF
VCR CH
PAUSE STOP
REC
SOURDINE (MUTE)
PIP
CM SKIP DISPLAY MUTE
Appuyer → Mise en sourdine du son.
Appuyer de nouveau → Rétablissement du
son.
SWAP FREEZE
MOVE
SELECT
• CLOSED CAPTION apparaît lorsque le son
est mis en sourdine.
En position câblovision (CATV), permet de
mettre un convertisseur de téléviseur par câble
sous/hors tension et de sélectionner
ses canaux.
IMAGE DANS L’IMAGE (FUNCTION PIP)
Vous pouvez regarder deux images en même
temps.
TV • VCR • CATV
COMMANDE DU MAGNÉTOSCOPE
AFFICHAGE (DISPLAY)
Appuyer pour afficher le canal reçu pendant
quatre secondes.
Appuyer de nouveau → Affichage du temps
restantduMINUTEURDEMISEHORS TENSION
ou du LIMITEUR.
• Pour afficher temporairement le canal
reçu en mode sous-titrage.
REMARQUE:
• Les boutons ombrés de la télécommande illustrés ci-dessus brillent dans l’obscurité lorsque la télécommande a été placée sous une
ampoule fluorescente ou toute autre source lumineuse.
• Le matériau phosphorescent n’est absolument pas toxique ou radioactif. Il peut donc être utilisé en toute sécurité.
• Le degré d’illumination variera en fonction de l’intensité de la source d’éclairage.
• Le degré d’illumination diminuera avec le temps, en fonction de la température.
• Le temps requis pour charger les touches phosphorescentes dépendra de l’éclairage environnant.
• Les rayons directs du soleil et les luminaires fluorescents constituent les meilleures sources de chargement des touches phosphorescentes.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu Functions
PERSONAL PREFERENCE
L Master these basic operations and the rest is simple.
VOLUME (+)/(–)
A
B
C
D
CH
CH
VOL
—
VOL
+
CHANNEL UP
(8)/DOWN (9)
MENU
MENU
Calling Up the Functions.
R/C buttons
1 Press MENU to access MAIN MENU screen.
2 Press CH UP (8) or DOWN (9) to move the “ : ”
mark to the desired function mode.
CH
CH
CH UP (8) moves the “ : ” mark up.
DOWN (9) moves the “ : ” mark down.
(MAIN MENU screen)
3 Press VOL (+) or (–) to access the desired
function mode. (If you select RETURN, the cursor
moves to the MAIN MENU)
VOL
—
VOL
+
L Accessing the MAIN MENU screen without Remote Control
• If you misplaced your Remote Control,
you can still access most settings via the
MAIN MENU screen when you press both
CH UP (8) and DOWN (9) on the TV set.
• Some features of your TV set will not be
accessible without the Remote Control. If
you lost your Remote Control, contact a
Sharp Service Center for a replacement.
(On the Set)
CH
MENU
(SET UP mode)
CHANNEL
UP (8)/DOWN (9)
buttons
L MENU SUMMARY
1. SLEEP TIMER
9. SET UP
You can set the number of minutes for your TV to automati-
cally turn off. See page 12.
You can select each function of PERSONAL PREFERENCE,
UNIVERSAL PLUS, BLUE SCREEN, EZ SET UP, AIR/
CABLE, CH SEARCH and CH MEMORY. See pages 20 - 23.
2. VIDEO ADJUST
You can adjust the settings of PICTURE, TINT, COLOR,
BRIGHTNESS, SHARPNESS, COLOR TEMP., FLESH
TONE and NOISE REDUCT. See page 13.
10. PERSONAL PREFERENCE
By selecting the PERSONAL PREFERENCE channels in
advance you can select your favorite channels easily. See
page 23.
3. AUDIO ADJUST
You can adjust the AUDIO settings such as the BASS,
TREBLE and BALANCE, as well as MTS, EQUISOUND and
internal SPEAKER ON/OFF and SRS. See pages 13 - 14.
11. UNIVERSAL PLUS
VCR input mode will be selected automatically by pressing
VCR PLAY button on UNIVERSAL REMOTE CONTROL, and
CATV input mode by pressing TV-CATV switch. See page 22.
4. CLOSED CAPTION
Your TV is equipped with an internal Closed Caption decoder.
“Closed Caption” is a system which allows you to view
conversations, narration, and sound effects in TV programs
and home videos as subscript on your TV screen. See page 12.
12. BLUE SCREEN
Automatically turns the screen blue if a broadcast signal is not
received. See page 23.
13. EZ SET UP
5. PARENT CONTROL (V-CHIP)
By operating the channel presetting functions, you can preset
your TV to the desired channels for viewing. See pages
20 - 21.
This function allows you to restrict TV programs, to control TV
usage based on FCC data and to prevent your children from
watching violence or sexual scenes that may be harmful. See
pages 15 - 19.
14. AIR/CABLE
You can select TV signal mode of AIR, CABLE STD, CABLE
HRC and CABLE IRC. See page 21.
6. PARENT CONTROL (VIEW TIMER)
This function allows you to restrict TV viewing time and also
allows you to control TV usage. This function is to prevent your
children from watching too much TV. See page 19.
15. CH SEARCH
You can save broadcast TV channels into memory. See
pages 21 - 22.
7. LANGUAGE
Allows you to select between ENGLISH, ESPAÑOL and
FRANCAIS from the ON SCREEN DISPLAY. See page 11.
16. CH MEMORY
You can add weak or additional channels, or erase unwanted
channels from TV memory. See pages 21 - 22.
8. ENERGY SAVE
This function controls the BRIGHTNESS of CRT and reduces
power consumption about 20 percent. See page 20.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
EZ SETUP during First Power On
Language
PERSONAL PREFERENCE
L When you turn on the TV for the first time, it will automatically
VOLUME (+)/(–)
A
B
C
D
memorize the broadcasting channels.
CH
CH
VOL
—
VOL
+
Please perform the following instructions before you press
the power button.
CHANNEL UP
(8)/DOWN (9)
(1) Insert the batteries into the remote control. (See page 5)
(2) Connect the antenna cable to the TV set. (See page 6)
MENU
MENU
(3) Plug in the AC POWER cord to the wall outlet.
L The language for the ON SCREEN DISPLAY can be set to
ENGLISH, SPANISH or FRENCH.
L Setting the ON SCREEN DISPLAY Language.
(On the Set)
POWER
1 Press the POWER button on the TV set or on the
Remote Control to turn on the TV. The SELECT
LANGUAGE mode will be displayed.
1 Press MENU to access MAIN MENU screen.
2
Press CH UP (8) or DOWN (9) to select
“ENGLISH”, “ESPAÑOL (SPANISH)” or “ FRANÇAIS
(FRENCH)” and then press VOL (+) or (–).
(Remote
Control)
2 Press CH UP (8) or DOWN (9) to move the “ : ”
CH
POWER
mark to “LANGUAGE”.
TV
CH
3 Press CH UP (8) or DOWN (9) to select “NEXT”.
CH
CH
VOL
—
VOL
+
(MAIN MENU screen)
CH
CH
(SELECT LANGUAGE screen)
4 Press VOL (+) or (–) to access SETAIR/CABLE mode.
VOL
—
VOL
+
3 Press VOL (+) or (–) to access LANGUAGE mode.
VOL
—
VOL
+
(SET AIR/CABLE mode)
5 Press VOL (+) or (–) to set AIR/CABLE.
(LANGUAGE mode)
VOL
—
VOL
+
CH
CH
4 Press CH UP (8) or DOWN (9) to move the “ : ”
mark to “ESPAÑOL (SPANISH)” or “FRANÇAIS
(FRENCH)”.
CABLE STD
CABLE IRC
CABLE HRC
AIR
6 Press CH UP (8) or DOWN (9) to select “NEXT”,
CH
CH
5 Press VOL(+) or (–) to select “ESPAÑOL
VOL
—
VOL
+
then press VOL (+) or (–) to access EZ SETUP mode.
(SPANISH)”.
VOL
—
VOL
+
(EZ SETUP mode)
VOL
+
7 Press VOL (+).
6 Press MENU to exit.
NOTE:
The tuner will automatically search for the broadcasting
and cable TV channels. (The CH No. will automatically
increase when it appears.)
• If EZ SETUP does not memorize all the channels
in your region, please refer to page 18 ~ 19 for more
information on manually memorizing the channels
using CHANNEL SETTING.
• It may be difficult to PRESET all channels in an
area when the broadcasting signals are weak, or
multiple stations are received on the same channel.
Please refer to pages 21 - 22 for more information
on manually memorizing additional channels using
CHANNEL MEMORY.
If you want to stop the EZ SETUP process once it has
VOL
—
started, press VOL (–) and it will be canceled.
If you want to SETUP again, please refer to pages 20 -
23 on SETUP. Press VOL (–) to cancel EZ SETUP.
8 Once EZ SETUP is completed, the lowest channel
number memorized will be displayed (Ex: 2 CH).
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Sleep Timer
Closed Caption
PERSONAL PREFERENCE
VOLUME (+)/(–)
A
B
C
D
CH
CH
VOL
—
VOL
+
CHANNEL UP
(8)/DOWN (9)
MENU
MENU
L You can set the number of minutes for your TV to
L HOW TO SET CLOSED CAPTION
automatically turn off.
• Your TV is equipped with an internal Closed Caption decoder.
“Closed Caption” is a system which allows you to view
conversations, narration, and sound effects in TV programs and
home videos as subscript on your TV screen as shown above.
• Not all the programs and videos will offer closed caption. Please
1 Press MENU to access MAIN MENU screen.
2 Press VOL (+) or (–) to access SLEEPTIMER mode.
VOL
VOL
+
—
3 Press VOL (+) or (–) to set a sleep time of 30, 60, 90
or 120 minutes.
look for the “
” symbol to ensure that captions will be shown.
VOL
—
VOL
+
• Closed Caption broadcast can be viewed in two modes:
CAPTION and TEXT. For each mode, two channels are available,
CH1 and CH2:
The [CAPTION] mode subscripts dialogues and commentaries
of TV dramas and news programs while allowing clear view of
the picture.
The [TEXT] mode displays over the picture other various
information (such as TV program schedule, weather forecast,
etc.) that is independent of the TV programs.
(SLEEP TIMER mode)
1 Press MENU to access MAIN MENU screen.
CH
2 Press CH UP (8) or DOWN (9) to move the “ : ”
4 Press MENU to exit.
mark to “CLOSED CAPTION”.
NOTE:
CH
• To turn off the Sleep Timer, repeat the above SLEEP TIMER
steps and select “– – – REMAIN” during step 3.
3 Press VOL (+) or (–) to access CLOSED CAPTION
setting mode.
VOL
—
VOL
+
• While Sleep Timer is active, the time remaining will be briefly
displayed on-screen at regular intervals or when the remote's
Display key is pressed.
4 Press CH UP (8) or DOWN (9) to move the “ : ”
mark to either “MODE” or “DATA”.
CH
CH
(CLOSED CAPTION setting mode)
VOL
—
VOL
+
5 Press VOL (+) or (–) to change the CLOSED CAPTION
setting.
CH 1
CH 2
DATA :
MODE :
CAPTION
TEXT
OFF
6 Press MENU to exit.
NOTE:
• If a broadcast has CLOSED CAPTION and the MUTE button is
pressed, the set enters [CAPTION] mode automatically. Pressing
MUTE again will return the set to its previous condition.
• Closed Caption may malfunction (white blocks, strange
characters, etc.) if signal conditions are poor or if there are
problems at the broadcast source. This does not necessarily
indicate a problem with your set.
• If any button is pressed to call up the ON SCREEN DISPLAY
while viewing a CLOSED CAPTION broadcast, the closed
captions will disappear momentarily.
• When viewing in TEXT mode, if no TEXT broadcast is being
received, for some programs the screen may become dark and
blank. Should this occur, set the Closed Caption mode to “OFF”.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Video Adjust
Audio Adjust
Description of Adjustment Items
L MTS (MULTICHANNEL TV SOUND)
This circuit allows reception of stereo or bilingual TV sound.
L EQUISOUND
This function keeps the volume level constant during
program changes and commercial breaks.
L INTERNAL SPEAKER SWITCH
Selected item
PICTURE
TINT
VOL UP (+) button
VOL DOWN (–) button
To increase contrast
To decrease contrast
To make skin tones greenish To make skin tones purplish
COLOR
To increase color intensity
To increase brightness
To increase sharpness
To decrease color intensity
To decrease brightness
To decrease sharpness
BRIGHT
This function turns the TV’s internal speakers “ON” or “OFF”
when listening to sound from external speakers by using
SHARP
COLOR TEMP.
To adjust color of the overall display:
“LOW” increases reddish color.
“HIGH” increases bluish color.
the AUDIO OUTPUT JACKS on page 26.
®
L
(SOUND RETRIEVAL SYSTEM)
LOW
M.L. (MID. LOW)
M.H. (MID. HIGH)
HIGH
In “STEREO” mode, this function restores the Audio’s three
dimensional quality so that stereo sound is closer to a live
performance. The “3D MONO” mode adjusts mono sound
to simulate a more open, stereo-like quality.
(
: VOL (+) /
: VOL (–))
FLESH TONE
When ON, adjusts skin tone to more natural colors.
NOISE REDUCTION When ON, reduces overall video noise.
RESET To return all adjustments to factory preset levels.
1 Press MENU to access MAIN MENU screen.
CH
CH
2 Press CH UP (8) or DOWN (9) to move the “ : ”
mark to “AUDIO ADJUST”.
1 Press MENU to access MAIN MENU screen.
2 Press CH UP (8) or DOWN (9) to move the “ : ”
CH
3 Press VOL (+) or (–) to access AUDIO ADJUST
VOL
—
VOL
+
mark to “VIDEO ADJUST”.
mode.
CH
3 Press VOL (+) or (–) to access VIDEO ADJUST
mode.
VOL
—
VOL
+
(AUDIO ADJUST mode)
CH
CH
4 Press CH UP (8) or DOWN (9) to move the “ : ”
mark to “MTS”, “EQUISOUND”, “SPEAKER” or
“SRS”.
(VIDEO ADJUST mode)
CH
CH
4 Press CH UP (8) or DOWN (9) to move the “ : ”
mark to “the item (Ex. COLOR)” you wish to adjust.
5 Press VOL (+) or (–) to access COLOR ADJUST
mode.
5 Press VOL (+) or (–) to select MTS mode “STEREO”,
VOL
VOL
+
—
“SAP” or “MONO”.
VOL
—
VOL
+
(MTS mode)
(COLOR ADJUST mode)
MTS
EQUISOUND SPEAKER
SRS
OFF
VOL
—
VOL
+
6 Press VOL (+) or (–) to adjust “COLOR”.
STEREO
ON
ON
SAP
OFF
OFF
3D MONO
STEREO
MONO
6 Press MENU to exit.
—
+
7 Repeat steps 4 to 5 to adjust other settings you wish
to adjust.
8 Press MENU to exit.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Audio Adjust (Continued)
PERSONAL PREFERENCE
NOTE:
• SRS and the
VOLUME (+)/(–)
A
B
C
D
symbol are trademarks of SRS Labs, Inc. in
CH
CH
VOL
—
VOL
+
CHANNEL UP
(8)/DOWN (9)
the United States and selected foreign countries. SRS technology
is incorporated under license from SRS Labs, Inc. and is
protected under United States Patent Nos. 4,748,669 and
4,841,572 with numerous additional issued and pending foreign
patents. Purchase of this product does not convey the right to
sell recordings made with the SRS technology.
MENU
MENU
Ex.
Actual screen indicating ON AIR when receiving
STEREO broadcasts.
Actual channel number
Selected item
BASS
VOL UP (+) button
VOL DOWN (–) button
To increase bass response.
To increase treble response.
To decrease bass response.
To decrease treble response.
TREBLE
BALANCE
To emphasize the right
To emphasize the left
speaker’s volume.
speaker’s volume.
RESET
To return all adjustments to factory preset levels.
1 Press MENU to access MAIN MENU screen.
CH
CH
2 Press CH UP (8) or DOWN (9) to move the
“ : ”mark to “AUDIO ADJUST”.
“← ON AIR” will appear next to STEREO or SAP
3 Press VOL (+) or (–) to access AUDIO ADJUST
when receiving STEREO or SAP broadcasts.
VOL
—
VOL
+
mode.
L You can enjoy Hi-Fi stereo sound or SAP broadcasts where
available.
• Stereo broadcasts
Live television transmission of sports, shows, concerts, etc. can
be received in dynamic stereo sound.
• SAP broadcasts
Television broadcast can be received with either MAIN or SAP
sound.
MAIN sound: The normal program soundtrack. (Monaural or
stereo where available.)
(AUDIO ADJUST mode)
SAP sound: Second language, supplementary commentaries,
etc. (SAP sound is monaural.)
CH
CH
4 Press CH UP (8) or DOWN (9) to move the “ : ”
L If stereo sound is difficult to hear.
mark to “BASS”.
• You can obtain clearer sound by manually switching to fixed
monaural mode.
NOTE:
• Once MONO mode is selected, the TV sound remains monaural
even if the TV set receives a stereo broadcast. You must switch
the mode back to STEREO if you want to hear stereo sound
again.
• Selecting MTS while in the INPUT mode does not change the
type of sound; in this case, sound is determined by the video
source.
VOL
—
VOL
+
5 Press VOL (+) or (–) to access BASS ADJUST
mode.
VOL
—
VOL
+
6 Press VOL (+) or (–) to adjust “BASS”.
—
+
(BASS ADJUST mode)
7 Repeat steps 4 and 5 to adjust the other settings
you wish to adjust.
8 Press MENU to exit.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Parent Control (V-CHIP operation)
L V-CHIP
• This function allows you to restrict TV programs and also allows you to control TV usage based on FCC data. This function is to prevent your
children from watching violence or sexual scenes that may be harmful.
• Restriction of TV programs includes two characters that contain information about the program’s MPAArating and the TV Parental Guidelines.
MPAA is restricted by age. TV Parental Guidelines are restricted by age and contents.
• Since a TV program may use either the MPAA rating or the TV Guidelines you should adjust both for complete control.
[1] MPAA RATING
RATING
G
GENERAL AUDIENCES. All ages admitted.
PG
PG-13
R
PARENTAL GUIDANCE SUGGESTED. Some material may not be suitable for children.
PARENTS STRONGLY CAUTIONED. Some material may be inappropriate for children under 13.
RESTRICTED. Under 17 requires accompanying parent or adult guardian.
NO ONE 17 AND UNDER ADMITTED.
age
base
NC-17
X
X Rating is an older rating that is unified with NC-17 but may be encoded on older movie’s data.Note:
• MPAA RATING (Example)
Example 1.
“PG-13” in the age-based
RATING is blocked. This will
automatically block the high
ratings “R”, “NC-17”, “X” also.
1. User setting
2. Block table
1. User setting
2. Block table
not to
not to
G
– – – – –
G
G
–––––
G
block
block
Example 2.
not to
not to
PG
– – – – –
PG
PG
–––––
PG
block
block
“R” in the age-based RATING is
blocked. This will automatically
block the high ratings “NC-17” and
“X” also.
Select
block
not to
block
PG-13 BLOCK
BLOCK
NC-17 BLOCK
BLOCK
PG-13
R
PG-13 –––––
BLOCK
PG-13
R
age
base
age
base
auto-
Select
R
R
block
block
auto-
block
auto-
block
NC-17 BLOCK
NC-17
X
NC-17
X
auto-
auto-
X
X
BLOCK
block
block
NOTE:
• MPAA RATING is only age-based ratings.
[2] TV PARENTAL GUIDELINES
y content base x
FV
(Fantasy
Violence)
V
S
L
D
RATING
(Violence)
(Sexual
Situation)
(Adult
(Sexually
Suggestive
Dialog)
Language)
TV-Y (All children)
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
E
age
base
TV-Y7 (Direct to Older Children)
TV-G (General Audience)
X
TV-PG (Parental Guidance Suggested)
TV-14 (Parents Strongly Cautioned)
TV-MA (Mature Audience Only)
X
X
X
X
X
X
X
D
X
X
X
X
X: Content Rating can be set.
X: Content Rating can not be set (not normally broadcast by TV station).
• TV-PARENTAL GUIDELINES (Example)
Example 1.
Example 2.
If “TV-Y7” in age-based rating is “BLOCK” then this will
automatically block the higher ratings “TV-G”, “TV-PG”, “TV-14”
and “TV-MA”. Furthermore, the “D”, “L”, “S”, “V”,and “FV” in
“CONTENT” are automatically blocked for “TV-Y7” as well unless
you choose to unblock each one.
If all items in the age-based RATINGS are not blocked, “D” in content-
based ratings will be blocked as below. (2. Block table)
1. User setting
2. Block table
content base
S
FV
V
L
D
TV-Y
TV-Y7 –––––
TV-G –––––
–––––
TV-Y
1. User setting
2. Block table
content base
S
TV-Y7
FV
V
L
D
TV-G
TV-PG
TV-14
TV-MA
age
base
TV-Y
TV-Y7 BLOCK
TV-G BLOCK
–––––
TV-PG –––––
TV-14 –––––
TV-MA –––––
TV-Y
TV-Y7
TV-G
TV-PG
TV-14
TV-MA
age
base
TV-PG BLOCK
TV-14 BLOCK
TV-MA BLOCK
BLOCK CONTENT (D
)
auto-
block
TV-Y7
BLOCK CONTENT (D L S V FV)
Select
block
auto-
block
TV-Y7
NOTE:
• Age-based ratings can be modified by the content-based ratings but only in the combinations indicated by an X in the table above.
• Choosing a lower age-based rating blocks the higher age-based ratings regardless of content ratings settings.
• An unblocked CONTENT RATING will override its respective AGE RATING, even when that AGE RATING is set to BLOCK. (For example,
if FCC data is “TV-PG” & “D”, then TV program is still viewable if CONTENT “D” is unblocked for “TV-PG” regardless if “TV-PG” AGE
RATING is also blocked.)
[3] ADDITIONAL MODE
Besides the above “MPAA RATINGS” and “TV PARENTAL GUIDELINES,” new ratings systems data can be downloaded when they
become available. (See page 17.)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Parent Control (V-CHIP operation Continued)
[2] TV GUIDELINES
PERSONAL PREFERENCE
VOLUME (+)/(–)
A
B
C
D
1 Repeat steps 1 to 4 of [1] MPAA RATING to access V-
CH
CH
CHIP select move.
VOL
—
VOL
+
CHANNEL UP
(8)/DOWN (9)
MENU
MENU
L HOW TO SET V-CHIP
[1] MPAA RATING
1 Press MENU to access MAIN MENU screen.
CH
CH
(V-CHIP SELECT mode)
2 Press CH UP (8) or DOWN (9) to move the “ : ” mark
CH
CH
to “PARENT CONTROL”.
2 Press CH UP (8) or DOWN (9) to move the “ : ” mark
to “TV GUIDELINES”.
3 Press VOL (+) or (–) to access TV GUIDELINES mode.
VOL
VOL
+
—
(MAIN MENU screen)
CH
CH
VOL
—
VOL
+
3 Press VOL (+) or (–) to access PARENT CONTROL
mode. (The “ : ” mark move to “V-CHIP BLOCK”)
(TV GUIDELINES mode)
VOL
—
VOL
+
4 Press CH UP (8) or DOWN (9) to move the “ : ” mark to
“TV-Y7”, then press VOL (+) or (–) to select BLOCK.
5 Press MENU to exit.
NOTE:
• Higher ratings and their CONTENT are blocked when a
lower rating is set to BLOCK. Refer to example 1 in TV
PARENTAL GUIDELINES section of V-CHIP operation
on page 15.
(PARENT CONTROL mode)
VOL
—
VOL
+
4 Press VOL (+) or (–) to access V-CHIP select mode.
CH
CH
1 If you want to change CONTENT in above step 4, press
CH UP (8) or DOWN (9) to move the “ : ” mark to
CONTENT, then press VOL (+) or (–) to access
CONTENT mode.
VOL
—
VOL
+
(V-CHIP SELECT mode)
VOL
—
VOL
+
5 Press VOL (+) or (–) to access MPAA rating mode.
CH
CH
(CONTENT mode)
2 You can select “BLOCK” or “– – – – –” (VIEW) from
each CONTENT by pressing CH UP (8) or DOWN (9)
and VOL (+) or (–) if you want to control these ratings.
VOL
—
VOL
+
3 Press MENU to exit.
NOTE:
CH
CH
• If FCC data of a TV program contains only theAGE rating
but not the CONTENT rating, then CONTENT settings
have no effect.
• Controlling only by the CONTENT rating works best if
each AGE rating is unblocked. Refer to example 2 in
TV PARENTAL GUIDELINES section of V-CHIP
operation on page 15.
(MPAA rating mode)
6 Press CH UP (8) or DOWN (9) to move the “ : ” mark
to “PG”, then press VOL (+) or (–) to select BLOCK,
VOL
VOL
+
—
7 Press MENU to exit.
NOTE:
• Higher ratings are blocked when a lower rating is set to
BLOCK. Refer to examples 1 and 2 in MPAA RATING
section of V-CHIP operation on page 15.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Parent Control (V-CHIP operation Continued)
3 Enter the 4-digit SECRET No. using the REMOTE
REMOTE
KEYPAD
1
4
7
2
5
8
0
3
6
1
4
2
5
8
0
3
6
KEYPAD, then V-CHIP BLOCK will temporarily be
canceled. If the wrong SECRET No. is chosen, “INPUT
SECRET No.” will be displayed again. Input the correct
SECRET No. again in this case.
9
ENTER
7
9
100
FLASHBACK
ENTER
100
PERSONAL PREFERENCE
VOLUME (+)/(–)
A
B
C
D
CH
CH
VOL
—
VOL
+
CHANNEL UP
(8)/DOWN (9)
MENU
MENU
[3] TURN ON V-CHIP BLOCK
1 Repeat steps 1 to 4 of (1) MPAA RATING to access V-
CHIP select mode.
VOL
—
VOL
+
4 “V-CHIP TIMER mode” is displayed, then press VOL (+)
or (–) to set TIMER.
1 2
(V-CHIP SELECT mode)
CH
CH
2 Press CH UP (8) or DOWN (9) to select “SECRET
No.” Enter the 4-digit secret no. (Ex. 1 2 3 4) using the
REMOTE KEYPAD.
3 Press CH UP (8) or DOWN (9) to select “STATUS” .
Press VOL (+) or (–) to turn “ON” the V-CHIP function.
(V-CHIP function is not operating if “STATUS” is
“OFF”.)
5 Press MENU to exit.
1
4
7
2
5
8
0
3
6
L To change the V-CHIP setting while V-CHIP BLOCK is set or
change the SECRET No. (When you forget the SECRET No.)
9
1 Change to another unblocked channel. Repeat steps
1 to 4 of [1] MPAA RATING to access V-CHIP select
mode. The “INPUT SECRET No.” will be displayed
ENTER
100
VOL +
CH
CH
CH
again.
2 Press and hold both VOL (+) and CH DOWN (9) on
MENU
the TV set simultaneously until the message “INPUT
SECRET No.” disappears. The V-CHIP select mode
VOL
—
VOL
VOL (+) /
+
will be displayed and its settings or secret number can
CHANNEL
be changed.
DOWN (9)
buttons
NOTE:
• As for the secret number, it will remain the same as shown
on the screen until you input another 4-digit pin number.
4 Press MENU to exit.
• If you turn the POWER OFF then ON again, the V-CHIP
function will be turned ON again.
L To cancel the V-CHIP BLOCK screen while V-CHIP BLOCK
has been activated.
[3]-A. Additional mode
1 “V-CHIP HAS BEEN ACTIVATED” will be displayed if
you watch the program with Program Rating data as
the same as you configured.
There will be an additional new rating system. In that case,
please setup as follows. Subsequently the new rating system
will setup automatically.
1 Repeat steps 1 to 4 of [1] MPAA RATING to access V-
1 2
CHIP select mode.
2 Press CH UP (8) or DOWN (9) to move the “ : ” mark
CH
to “OPTION”, then press VOL (+) or (–).
CH
VOL
—
VOL
+
NOTE:
• “V-CHIP HAS BEENACTIVATED” will not be displayed
if STATUS is not configured to “ON”.
2 Press MENU, then “INPUT SECRET No.” will be
(V-CHIP SELECT mode)
displayed.
—
—
—
—
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Parent Control (V-CHIP operation Continued)
CH
4 You can select “BLOCK” or “– – – – –” (non BLOCK)
from each RATING by pressing CH UP (8) or DOWN
(9) and VOL (+) or (–) if your select “Cdn. FRENCH
RATINGS” in step 2.
3 Press CH UP (8) or DOWN (9) to select “DOWNLOAD”
,
CH
CH
press VOL (+) or (–) to activate “ON”.
CH
VOL
—
VOL
+
VOL
VOL
+
—
4 Press MENU to exit.
(CANADIAN FRENCH INDIVIDUAL BLOCK)
L DOWNLOAD V-CHIP DATA
L The screen displays as follows when the picture is blocked
due to V-CHIP being activated.
1 If you watch the program with “New Rating System
Data”, DOWNLOAD screen will be displayed.
A) PIP (Picture In Picture) is OFF
This is shown as page 17 [L To cancel the V-CHIP BLOCK
screen while V-CHIP BLOCK has been activated].
B) PIP is ON
When the Main Picture is blocked, Main Picture will turn to blue
and “V-CHIP has been activated” will be displayed.
(Main and Sub Channel No. are displayed, but Sub Picture is
not displayed.)
This message will remain the same on the screen. Cancel the V-
CHIP BLOCK temporarily at the V-CHIPTIMER mode or change
to other channel in this case.
(DOWNLOAD screen)
1 2
2 DOWNLOAD screen will disappear, if DOWNLOAD is
finished.
NOTE:
• DOWNLOAD would not be started if you don’t watch
the program with New Rating System Data.
[3]-B. Additional mode (Example)
(Main Picture screen)
1 Repeat steps 1 to 4 of [1] MPAA RATING to access V-
CHIP select mode.
When the Sub Picture is blocked, Sub Picture will turn to blue
and “V-CHIP has been activated” will be displayed. This message
will remain the same on the screen. Cancel the V-CHIP BLOCK
temporarily at the V-CHIP TIMER mode or change to other
channel in this case.
2 Press CH UP (8) or DOWN (9) to select “Cdn. ENGLISH
CH
CH
RATINGS”, then press VOL (+) or (–).
VOL
—
VOL
+
1 2
Main
Picture
Sub
Picture
(After download, the new rating data)
3 You can select “BLOCK” or “– – – – –” (non BLOCK)
from each RATING by pressing CH UP (8) or DOWN
(9) and VOL (+) or (–).
(Main and Sub Picture screen)
CH
CH
V-CHIP TIMER mode during PIP ON
VOL
—
VOL
+
1 2
(V-CHIP TIMER mode)
(CANADIAN ENGLISH INDIVIDUAL BLOCK)
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Parent Control (VIEW TIMER)
L Notice of Remaining VIEWING TIME
L VIEW TIMER
This function allows you to restrict TV viewing time and also
allows you to control TV usage. This function is to prevent
your children from watching too much TV.
• For every 30 minute interval, the
“remaining time” will be displayed for
four seconds. For the last 5 minutes,
the “remaining time” will be displayed
every minute.
• “0H 00M REMAIN” will be displayed for
10 seconds just before the VIEWING
TIME is completed.
L How to set VIEW TIMER.
1 Press MENU to access MAIN screen.
CH
2 Press CH UP (8) or DOWN (9) to move the “ : ”
mark to “PARENT CONTROL”.
CH
L To cancel the VIEW TIMER setting or change the SECRET
3 Press VOL (+) or (–) to access PARENT CONTROL
No.(When you forget the SECRET No.)
mode.
VOL
—
VOL
+
1 Repeat steps 1 to 3 of “How to set VIEW TIMER.”
4 Press CH UP (8) or DOWN (9) to move the “ : ”
VOL
—
VOL
+
During Step 3, Press VOL (+) or (–), and the
message “VIEWING TIMER NOW SET” will be
displayed.
mark to “VIEW TIMER”.
CH
CH
(On the Set)
VOL +
CH
2 Press and hold both VOL (+) and CH DOWN (9) on
the TV set simultaneously until the message
“VIEWING TIMER NOW SET” disappears. The
VIEW TIMER is now off.
3 Now repeat again Steps 1 to 3 of “How to set VIEW
TIMER." During Step 3, press the VOL (+) or (–),
and the message “INPUT SECRET No.” is
displayed.
MENU
VOL (+) /
CHANNEL
DOWN (9)
buttons
(PARENT CONTROL mode)
VOL
—
VOL
+
5 Press VOL (+) or (–) to access VIEW TIMER mode.
VOL
—
VOL
+
—
—
—
—
CH
CH
(VIEW TIMER mode; before setting)
(VIEW TIMER mode)
4 Enter the 4-digit SECRET No. using REMOTE
KEYPAD, and the VIEW TIMER mode will be
displayed. Repeat Steps 5 - 7 of “How to set VIEW
TIMER”.
6 Press CH UP (8) or DOWN (9) to select “VIEWING
TIME” and “OFF TIME”. For each selection, press
the VOL (+) or (–) to set the time duration.
7 Press CH UP (8) or DOWN (9) to select “SECRET
No.” and then enter the 4-digit no. using the REMOTE
KEYPAD.
8 Press CH UP (8) or DOWN (9) to select “STATUS”.
Press the VOL (+) or (–) to turn ON the “VIEWING
TIMER”. (If STATUS is OFF, VIEW TIMER is not
operated)
VOL
VOL
+
1
4
7
2
5
8
0
3
6
—
9
CH
CH
ENTER
100
1
4
7
2
5
8
0
3
6
(On the Set)
VOL +
CH
*
*
*
*
9
ENTER
100
MENU
5 If in Step 4 above you have forgotten your SECRET
No., press and hold both VOL (+) and CH DOWN
(9) on the TV set simultaneously until the message
“INPUT SECRET No.” disappears and the VIEW
TIMER mode will be displayed. Then repeat Steps
5 - 7 of “How to set VIEW TIMER”.
CH
CH
VOL (+) /
CHANNEL
DOWN (9)
buttons
VOL
—
VOL
+
6 Press MENU to exit.
NOTE:
• When you choose the correct SECRET No., VIEW TIMER mode
is displayed. If the wrong SECRET No. is chosen, the screen
message is not displayed. Input the SECRET No. again in this
case.
• While the TV set is OFF but the VIEW TIMER is set: Turn on TV;
the screen message “TIME OVER” will appear. If you do nothing,
the TV will turn off in approximately 30 seconds.
(VIEW TIMER mode; after setting)
9 Press MENU to exit.
NOTE:
Example
• To restrict anybody from watching the TV for 5 hours, after
watching the TV for 2 hours, your settings would look like the
settings in Step 8.
• They can choose to watch the 2 hours of TV however they wish.
For example, they could watch 1 hour of TV, turn TV off for 30
minutes, then turn TV on and watch the remaining 1 hour on the
VIEWING TIMER.
• To cancel VIEW TIMER while the TV set is OFF but the VIEW
TIMER is set: Turn on the TV; the screen message “TIME OVER”
will appear. Repeat “To cancel VIEW TIMER” Steps 2 - 6.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Energy Save
Set Up
L EZ SETUP
1
4
2
5
8
0
3
6
REMOTE
KEYPAD
By operating the channel presetting functions, you can
preset your TV to the desired channels for viewing.
7
9
FLASHBACK
ENTER
1 Press MENU to access MAIN MENU screen.
100
PERSONAL PREFERENCE
VOLUME
A
B
C
D
(+)/(–)
CH
CH
VOL
—
VOL
+
CHANNEL UP
(8)/DOWN (9)
MENU
MENU
L This feature lets you lower the power consumption of your
TV set which in turn saves you money and minimizes the
impact on the environment. When this feature is turned on,
it reduces the brightness of the TV to a level that consumes
approximately 20 percent less energy than when the feature
is turned off.
(MAIN MENU screen)
CH
2 Press CH UP (8) or DOWN (9) to move the “ : ”
CH
mark to “SET UP”.
3 Press VOL (+) or (–) to access SET UP mode.
VOL
VOL
+
The reduction in brightness will be less noticeable under
low room lighting conditions.
—
1 Press MENU to access MAIN MENU screen.
2 Press CH UP (8) or DOWN (9) to move the “ : ”
CH
CH
mark to “ENERGY SAVE”.
(SET UP mode)
CH
CH
4 Press CH UP (8) or DOWN (9) to move the “ : ”
mark to “EZ SET UP”.
(MAIN MENU screen)
VOL
—
VOL
+
3 Press VOL (+) or (–) to access ENERGY SAVE
select mode.
VOL
—
VOL
+
5 Press VOL (+) or (–) to access EZ SET UP.
(ENERGY SAVE select mode)
VOL
—
VOL
+
4 Press VOL (+) or (–) to select “ON”.
VOL
+
6 Press VOL (+).
The tuner will automatically search for the
broadcasting and cable TV channels. (The CH No.
will automatically increase when it appears.)
If you want to stop the EZ SETUP process once it
has started, press VOL (–). Search will be canceled.
VOL
—
To cancel EZ SETUP
Press VOL (–).
5 Press MENU to exit.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up (Continued)
7 Once EZ SETUP is completed, the lowest channel number
1
4
2
5
8
0
3
6
REMOTE
KEYPAD
memorized will be displayed. (Ex. 2CH)
7
9
L CHANNEL SETTING
FLASHBACK
ENTER
100
If EZ SETUP does not memorize all the channels in your
region, follow the instructions below to manually memorize
the channel.
PERSONAL PREFERENCE
VOLUME
(+)/(–)
A
B
C
D
CH
CH
VOL
VOL
—
+
CHANNEL UP
(8)/DOWN (9)
1 AIR/CABLE setting
MENU
1 Repeat steps 1 to 3 of EZ SETUP.
CH
MENU
2 Press CH UP (8) or DOWN (9) to move the “ : ”
2 Saving Broadcast TV channels to memory.
CH
mark to “AIR/CABLE”.
1 Repeat steps 1 to 3 of EZ SETUP.
CH
2 Press CH UP (8) or DOWN (9) to move the “ : ”
CH
mark to “CH SEARCH”.
(SET UP mode)
VOL
—
VOL
+
3 Press VOL (+) or (–) to access AIR/CABLE select
mode.
(SET UP mode)
VOL
—
VOL
+
4 Press VOL (+) or (–) to select your TV signal mode.
VOL
—
VOL
+
3 Press VOL (+) or (–) to access CH SEARCH mode.
2
(AIR/CABLE SELECT mode)
(CH SEARCH mode)
4 Press VOL (+). The tuner will search through all
available channels in your area and add them into
the TV’s memory.
VOL
+
CABLE STD
CABLE IRC
CABLE HRC
AIR
(TV signal mode)
5 Press MENU to exit.
TO STOP SEARCH
VOL
—
Press VOL (–). CH SEARCH will stop at the current
channel and will not add any higher channels.
NOTE:
• Receivable channels of your TV set are:
AIR channels:
5 Press MENU to exit.
VHF: 2 through 13.
UHF: 14 through 69.
NOTE:
• If you press VOL (+) again while in the CH SEARCH mode, auto-
program will start again, and the previously memorized channels
will be lost.
CABLE channels:
1 (HRC and IRC mode only)
2 through 125 (STD, HRC and IRC)
3 Adding weak or additional channels or erasing unwanted
channels from TV memory.
1 Repeat steps 1 to 3 of EZ SETUP.
CH
2 Press CH UP (8) or DOWN (9) to move the “ : ”
CH
mark to “CHANNEL MEMORY”.
(SET UP mode)
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up (Continued)
3 Press VOL (+) or (–) to access CH MEMORY mode.
VOL
—
VOL
+
POWER
TV
VCR
INPUT
INPUT
REMOTE
KEYPAD
1
4
2
5
8
0
3
6
9
CH
CH
7
VOLUME
(+)/(–)
FLASHBACK
ENTER
100
PERSONAL PREFERENCE
A
B
C
D
1
4
7
2
5
8
0
3
6
CH
CH
(CH MEMORY mode)
CHANNEL UP
VOL
—
VOL
+
9
(8)/DOWN (9)
4 Use CH UP (8) or DOWN (9) or REMOTE KEYPAD
ENTER
100
MENU
to select each desired channel to add or erase.
MENU
5 Press VOL (+) to add a channel to the TV’s memory
or press VOL (–) to erase a channel from the TV’s
memory.
VOL
+
L UNIVERSAL PLUS Function
VOL
—
VCR input mode will be selected automatically by pressing
VCR PLAY button on UNIVERSAL REMOTE CONTROL. (for
VCR connections, see pages 27 - 30)
(CH MEMORY
unmemorized
channel)
1 Repeat steps 1 to 3 of EZ SETUP.
CH
2 Press CH UP (8) or DOWN (9) to move the “ : ”
CH
mark to “UNIVERSAL PLUS”.
3 Press VOL (+) or (–) to access UNIVERSAL PLUS
VOL
—
VOL
+
mode.
VOL (+)
To add channel 12
from the TV memory
VOL (–)
To erase channel 12
from the TV memory
(CH MEMORY
memorized
channel)
(UNIVERSAL PLUS mode)
4 Press INPUT to select the VCR connection. If VCR
is connected to Antenna use REMOTE KEYPAD to
select channel 3 or 4 to match the setting of the
VCR.
1
4
7
2
5
8
0
3
6
6 Press MENU to exit.
9
ENTER
100
(VCR Setting mode)
CH
CH
5 Press CH UP (8) or DOWN (9) to move the “ : ”
mark to “STATUS”, and press VOL (+) or (–) to set
ON.
VOL
VOL
+
—
6 Press MENU to exit.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Set Up (Continued)
L PERSONAL PREFERENCE
POWER
By setting the PERSONAL PREFERENCE channels in
advance, you can select your favorite channels easily. You
can program six favorite channels in four different
categories. (total of 24 channels)
TV
VCR
INPUT
INPUT
REMOTE
KEYPAD
1
4
2
5
8
0
3
6
9
1 Repeat steps 1 to 3 of EZ SETUP
7
VOLUME (+)/(–)
FLASHBACK
ENTER
2 Confirm the “ :” mark is at “PERSONAL PREF.”.
100
PERSONAL PREFERENCE
A
B
C
D
CH
CH
VOL
—
VOL
+
CHANNEL UP
(8)/DOWN (9)
MENU
MENU
L BLUE SCREEN
Automatically turns the screen blue if a
broadcast signal is not received.
(SET UP mode)
VOL
VOL
+
—
3 Press VOL (+) or (–) to access PERSONAL
PREFERENCE mode.
1 Repeat steps 1 to 3 of EZ SETUP.
2 Press CH UP (8) or DOWN (9) to move the “ : ”
mark to “BLUE SCREEN”.
CH
CH
CH
4 Press CH UP (8) or DOWN (9) and VOL (+) or (–)
to move the “ : ” mark to the desired position.
CH
VOL
—
VOL
+
(SET UP mode)
(PERSONAL PREFERENCE mode)
VOL
VOL
+
—
3 Press VOL (+) or (–) to access BLUE SCREEN
mode.
4 Press VOL (+) or (–) to turn STATUS “ON”.
5 Use the REMOTE KEYPAD to input the CHANNEL
Number into the memory.
1
4
7
2
5
8
0
3
6
VOL
—
VOL
+
Example:
125: — Press "100” followed by “2” and then “5”.
9
ENTER
100
125 25
40
4
18
20
6 Repeat steps 4 and 5 to input the next CHANNEL
Number.
7 Press MENU to exit.
L To select the PERSONAL PREFERENCE
channel.
(BLUE SCREEN mode)
If the channels are memorized as shown here:
5 Press MENU to exit.
NOTE:
• Poor reception due to weak signals, or too much noise might
activate the BLUE SCREEN function despite the presence of a
broadcast signal. To continue watching TV under these conditions,
switch the BLUE SCREEN “OFF”.
Then press the Remote's "A" button to select the
Channels below:
• While either VCR or COMPONENT VIDEO input mode are
selected, the BLUE SCREEN will not be shown on your TV even
if the BLUE SCREEN is turned on.
125 25
40
4
18
20
• If you choose the BLUE SCREEN mode, sometimes the BLUE
SCREEN will appear or disappear due to the condition of the
reception. In this case, cancel the BLUE SCREEN mode.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
PIP (2 Tuner Picture In Picture)
POWER
L Using the various video input or the second tuner, you can
watch two programs at the same time.
TV
VCR
INPUT
INPUT
During airing of commercial messages, you can watch
other program by using the CM SKIP function.
PIP
CM SKIP DISPLAY MUTE
PIP
SWAP
CM SKIP
SELECT
MOVE
SWAP FREEZE
MOVE
SELECT
L To view the Inset Picture.
Press PIP.
FREEZE
(Press the button to turn the Inset Picture on and off).
L To swap the Main and Inset Pictures.
• Press SWAP.
(Press the button to swap the pictures again.)
Example:
Main Picture
1 2
Insert
Picture
Main Picture n 12CH
Inset Picture n INPUT1
Push SWAP.
L Channel Display when PIP is ON (4 seconds).
Example:
I N P U T 1
Main Picture n INPUT1
Inset Picture n 12CH
Main Picture — Channel 12
Inset Picture — Channel 6
Channel display
for main picture
1 2
6
L To move the Inset Picture.
Channel display
for inset picture
Press MOVE.
(Press the button again to move the Inset Picture to another
position.)
L To select the channel or input mode for the Inset Picture.
• If you want to change the channel or input mode, then press
SELECT to move the “ :” mark to channel display “SUB.”.
1 2
L Freeze-Frame Inset Pictures.
• When the Inset Picture is on the screen, press the FREEZE to
freeze the Inset Picture.
1 2
Only when the Main Picture is on the screen, press the FREEZE
to inset a freeze-frame of the Main Picture.
• Press FREEZE again to remove the Inset Picture.
Press INPUT.
(Each time you press the button, the picture will
change as shown below.)
L Commercial Skip Function
• Use this function when you want to scan other channels during
a commercial break.
1 2
1 2
1 2
1 2
(1) When a program break occurs, press CM SKIP. Then Main
Picture move to the Inset Picture. (While you are watching other
channels you can check the Inset Picture.)
(2) Press CM SKIP when the program in Inset Picture starts again.
1 2
Then Inset Picture moves to Main Picture.
NOTE:
• When the Main Picture’s signal is black and white or the signal
is lost, the Inset Picture may change to black and white. In this
case, the Inset Picture may appear with a bit of vertical jagged
lines depending on the type of receiving signal.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Video and Audio Input Jacks
L Connecting video equipment for playback of video material.
• When the television is connected to video equipment as shown below, the material being played back on the video equipment can be seen
on the television screen.
Connecting video device equipped with video output terminal.
CONNECTIONS
(Front connection
VIDEO EQUIPMENT
terminals of TV)
VIDEO IN 2 L-AUDIO-R
Signal
To AUDIO OUTPUT
To VIDEO OUTPUT
CAMCORDER
TV GAME
(Rear connection terminals of TV)
Video Equipment
LINE IN
IN 1 IN 3
LINE
OUT
VIDEO
S-VIDEO
IN 1
IN 3
L
AUDIO
R
TO S-VIDEO OUTPUT
(When your video equipment
has an S-VIDEO output terminal).
TO S-VIDEO OUTPUT
(When your video equipment has an S-VIDEO output terminal).
To AUDIO INPUT (L)
To AUDIO INPUT (R)
To VIDEO INPUT
L To watch video material playback.
• Press the Remote’s INPUT to select the VIDEO INPUT mode to which the video equipment you want to playback is connected.
• The external VIDEO INPUT mode will change as follows each time the INPUT is pressed.
AIR VIDEO 1 VIDEO 2
VIDEO 3
(IN 3)
Rear
or
(IN 1)
(IN 2)
Front
CABLE Rear
• INPUT mode can be selected by pressing either the CH UP (8) on the TV remote control when the TV is set to the highest channel stored
in memory, or by pressing the CH DOWN (9) when it is set to the lowest channel.
NOTE:
• When connecting video or audio equipment to the television, be sure that the power is turned off in order to prevent damage to either the
television or the equipment being connected.
• An S-VIDEO terminal has priority over its corresponding VIDEO terminal (IN 1 or IN 3). When you want to watch pictures from video
equipment connected to a VIDEO terminal, unplug equipment connected to the corresponding S-VIDEO terminal.
• It is the intent of SHARP that this product be used in full compliance with the copyright law of the United States and that prior permission be
obtained from copyright owners whenever necessary.
• For detailed information on the connection and use of auxiliary equipment, refer to the instruction manuals of the equipment being used.
• The connection cords can be obtained from your local video store.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Audio Output Jacks
L These jacks are used for connecting a standard studio amplifier. Control of STEREO/MONO/SAP, BASS, TREBLE, BALANCE,
VOLUME and MUTE are retained at the TV. These jacks relay the audio signal of all programs being displayed on the TV screen.
(AUDIO OUTPUT JACKS are located on the rear of the cabinet).
CONNECTIONS
(Rear connection terminals of TV)
is a trademark of SRS Labs, Inc.
Either the S-VIDEO or the VIDEO terminal can be used,
but the S-VIDEO overrides the VIDEO terminal.
LINE IN
IN 1 IN 3
LINE
OUT
VIDEO
S-VIDEO
IN 1
IN 3
L
AUDIO
R
ANT/
CABLE
75Ω
Either the S-VIDEO or he VIDEO terminal can be used,
but the S-VIDEO overrides the VIDEO terminal.
t
LINE IN
IN
LINE
OUT
IN
1
3
VIDEO
S-VIDEO
IN
IN
1
3
L
AUDIO
R
To the audio
Input terminals
Stereo amplifier
Speaker System
(1) Before connecting the cord, turn on the TV and adjust the VOLUME control on the TV for a moderate listening level.
(2) Turn off the TV and connect the audio cord to the AUDIO LINE OUTPUT JACKS on the TV.
(3) Turn the TV set and stereo amplifier on.
(4) If you desire, you can turn off the sound to the TV’s internal speakers by SPEAKER mode. See pages 13 - 14.
(5) Adjust the VOLUME control on the stereo amplifier for a moderate listening level.
(6) Control of the audio can be done using the audio controls (STEREO/MONO/SAP, VOLUME, SRS, EQUISOUND and MUTE), from either
the remote control, or directly from the TV set.
NOTE:
• For detailed information on the connection and use of auxiliary equipment, refer to the operation manuals of the equipment being used.
• When connecting monaural equipment to the AUDIO INPUT or OUTPUT of this set, use an audio connection cord and plug adapter as
shown below.
• For optimal sound quality, it is recommended to keep the TV’s audio output level high.
Plug adapter
To the equipment
being connected
To the TV
Pin plug x 2
Pin plug
Pin jack/Mini plug
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation of Remote Control
L Universal Remote Control
L “Identifying” Remote VCR and Cable TV Converters
With the purchase of your television set you also have received
the latest innovation in remote control technology. With its easy-
to-use push button keyboard, your Remote can control your
television set and most infrared remote controlled VCRs and
cable TV converters as well.
Your Remote Control has been set at the factory to operate your
TV and many remote control VCRs and Cable Converters.
However, in some cases an easy one-time set-up step may be
necessary before the Remote will operate accessory VCRs and
Cable Converters.
• In this set-up step, the Remote locates and memorizes the remote
control transmitter code for the VCR or Cable Converter.
• Once “identified”, the Remote sends the proper remote signals
to operate your accessory.
• This identify step will not have to be repeated until power to the
Remote is interrupted due to a battery failure.
NOTE:
• Depending on the model, year produced, brand and type of VCR,
some models may not be compatible with the remote control.
• Some brands of Cable TV converter Box may not enable channel
selection until the ENTER is pressed.
Example:
L USING YOUR REMOTE CONTROL WITH A VCR
When you select channel 24,
Once you make certain the Remote Control has “identified” your
remote controlled VCR, the Remote Control is ready to operate
your unit. The various VCR function buttons on the Remote
Control will not operate your VCR if those features are not already
found on your unit.
(1) Press REMOTE KEYPAD “2”.
(2) Press REMOTE KEYPAD “4”.
(3) Press ENTER.
For detailed information on the use of the VCR or Cable TV
converter Box refer to their operating manuals.
• All VCR buttons will operate whether the Remote Control is in
TV or CATV modes.
L Using Your Remote With Your TV
• For detailed information on the use of the VCR, refer to the
operation manual of the VCR.
After installing the batteries, set the TV-CATV on the remote to
the TV position. (If you can change the channel of the TV by
pressing CH UP (8) or DOWN (9) on the Remote Control, it is
the TV position.)
REMOTE KEYPAD
VCR POWER
Use to enter two-digit code numbers
when identifying your VCR.
Press to turn the VCR on and off.
POWER
TV
VCR
INPUT
PLAY -
Press to playback a tape.
ENTER
1
4
2
5
8
0
3
6
9
FF )
REWIND (
Press to rewind a tape.
Press to rapidly advance the tape.
For some VCRs, you may need to press
STOP first, then FF.
In Playback mode, hold button down to
view the picture moving rapidly in
forward direction.
For some VCRs you may need to
press STOP first, then REWIND.
In Playback mode, hold button
down to view picture moving rapidly
in reverse.
7
FLASHBACK
ENTER
100
PERSONAL PREFERENCE
A
B
C
D
CH
CH
VCR CHANNEL
UP (8)/ DOWN (9)
Press to scan up or down through
channels on the VCR.
PAUSE J
VOL
—
VOL
+
Press to temporarily stop the tape
during playback or recording.
Press again to release Pause.
MENU
CATV
TV
RECORD [
Press to begin recording.
STOP L
Press to stop the tape.
REW
PLAY
FF
VCR CH
PAUSE STOP
REC
PIP
CM SKIP DISPLAY MUTE
SWAP FREEZE
MOVE
SELECT
PIP BUTTONS
See page 24.
TV • VCR • CATV
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation of Remote Control (Continued)
Some brands have more than one remote code listed, due to
changes in the remote codes from early to later model years, or
due to format differences (VHS/BETA). In such cases, you may
have to try more than one code to find the code your VCR
accepts.
VCR POWER
POWER
TV
VCR
INPUT
1
4
2
5
8
0
3
6
9
NOTE:
REMOTE
KEYPAD
Depending on the model, year produced, brand, and type of VCR,
some models may not be compatible with the remote control.
7
FLASHBACK
ENTER
100
L To Identify Your VCR – Search Method.
PERSONAL PREFERENCE
(1) Slide TV-CATV switch on the remote to TV.
(2) Press POWER on the VCR to ON.
(3) Stand at least six feet away from the front of the VCR.
Point the remote towards the VCR.
A
B
C
D
CH
CH
VOL
—
VOL
+
CHANNEL
UP (8)/
DOWN (9)
Hold down DISPLAY and CH UP (8) at the same time. Keep
holding the buttons down.
(4) Watch the Channel Number indicator on the VCR. Channel
numbers will scan up when the VCR has been identified.
Release DISPLAY and CH UP (8) as soon as the channel
numbers start to scan up.
MENU
CATV
TV
TV-CATV
REW
PLAY
FF
The VCR’s remote control code number has been identified, and
the remote is ready to operate the VCR.
VCR CH
PAUSE STOP
REC
PIP
CM SKIP DISPLAY MUTE
DISPLAY
SWAP FREEZE
MOVE
SELECT
L HOW TO IDENTIFY A VCR
The remote control may already be set to operate your VCR. Try
this initial check to see if going on to the following “identify” section
is necessary.
(1) Point remote towards VCR and press VCR POWER.
(2) Does the remote turn the VCR ON and OFF?
• If yes, the remote is ready to operate the VCR and no further
steps are needed.
• If no, continue to the “identify” section.
L To Identify Your VCR – Direct Entry Method.
Use the following steps and list on page 29 to quickly find the
remote control code for your accessory VCR.
• First look up your VCR’s remote control code number before
going through the direct code entry steps control.
• If this procedure does not identify your accessory VCR, use the
Search method of identification (described in the next section).
(1) Slide TV-CATV switch to TV.
(2) Press and hold down DISPLAY and CH DOWN (9) on your
remote control.
Then release both buttons.
(3) Within ten seconds after releasing DISPLAY and CH DOWN
(9), enter your VCR’s two-digit remote control code number using
REMOTE KEYPAD (refer to list).
• The remote control is now ready to send commands to your
VCR.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation of Remote Control (Continued)
REMOTE CONTROL
CODE NUMBER
VCR BRAND
POWER
TV
VCR
INPUT
Akai _______________ 25, 26, 37
Audio Dynamics ______ 15, 22, 30
Broksonic ___________ 32
Canon _____________ 04
Capehart ___________ 34
Craig ______________ 10, 31
Curtis Mathis ________ 04
Daewoo ____________ 34
DBX _______________ 15, 22, 30
Dynatech ___________ 29
TV POWER
1
4
7
2
5
8
0
3
6
9
REMOTE
KEYPAD
FLASHBACK
ENTER
100
PERSONAL PREFERENCE
A
B
C
D
Emerson ___________ 21, 32, 35
Fisher______________ 09, 10, 11
Funai ______________ 28, 29
GE ________________ 04
Goldstar ____________ 24
Hitachi _____________ 06
CH
CH
VOL
—
VOL
+
CHANNEL
UP (8)/
DOWN (9)
MENU
CATV
TV
Instant Replay _______ 04
JC Penney __________ 04, 06, 24, 30
JVC _______________ 15, 41, 42
Kenwood ___________ 14, 15
Lloyds _____________ 29
TV-CATV
REW
PLAY
FF
VCR CH
PAUSE STOP
REC
Magnavox __________ 04, 05, 08
Magnin _____________ 31
PIP
CM SKIP DISPLAY MUTE
Marantz ____________ 30
Memorex ___________ 04, 10, 24, 29
Minolta _____________ 06
DISPLAY
SWAP FREEZE
MOVE
SELECT
TIPS ON IDENTIFYING YOUR VCR:
Mitsubishi ___________ 17, 18, 39, 40
Montgomery Ward ____ 02, 43
Multitech ___________ 29
NEC _______________ 15, 22, 30
Panasonic __________ 04, 44
Pentax _____________ 05, 06
Philco ______________ 04, 05
Philips _____________ 04, 05, 08
Quasar _____________ 04
RCA _______________ 06, 07, 33
Realistic ____________ 01, 02, 10, 24
Samsung ___________ 23, 31
Sanyo _____________ 14, 10
Scott ______________ 20
If your VCR model does not have the CHANNEL UP function on its
remote control, it cannot be identified using the SEARCH method of
identifying. For such models, please try the DIRECT ENTRY method
of identifying.
Be Patient: a minute or two can seem a lot longer when you’re waiting
for something to happen, but the code should be identified within
two minutes. Remember, it is only a one-time set-up.
Be careful not to let the VCR scan more than five channels when
the indicator starts to move up. If you continue holding down the
DISPLAY and CH UP (8) after five channel scans, the proper remote
code can be passed up, and the two minute identify cycle will have
to be repeated.
If a channel change does not occur on the VCR within two minutes,
read the identifying instructions again and repeat the steps. Should
a channel change still not occur, the remote will not operate with the
desired VCR.
Sears ______________ 06, 11, 24
Sharp ______________ 01, 02, 03
Shintom ____________ 36
Sony ______________ 12, 13, 38
Sound Design _______ 29
Sylvania ____________ 04, 05, 08
Symphonic __________ 29
Tatung _____________ 15
Teac _______________ 15, 29
Teknika ____________ 27, 29
Thomas ____________ 29
TMK _______________ 21
Toshiba ____________ 19, 20
Video Concepts ______ 30
Yamaha ____________ 15, 29, 30
Zenith______________ 16
L HOW TO IDENTIFY A CABLE CONVERTER
L To Identify Your Cable Converter –Direct Entry Method.
Use the following steps and list to quickly find the remote control
code for your cable TV converter.
• First look up your converter’s remote code number on page 30
before going through the direct code entry steps below.
• If this procedure does not identify your converter, use the Search
method of identification (described in the next section).
(1) Slide TV-CATV switch to CATV.
(2) Press and hold down DISPLAY and CH DOWN (9) on your
remote control.
Then release both buttons.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Operation of Remote Control (Continued)
(3) Within ten seconds after releasing DISPLAY and CH DOWN
REMOTE CONTROL CODE
NUMBER
CATV CONVERTER
(9), enter your converter’s two-digit code number using REMOTE
KEYPAD (refer to list).
BRAND
• The remote control is now ready to send commands to your
converter.
• Some brands have more than one remote code listed, due to
changes in the remote codes from early to later model years. In
such cases, you may have to try more than one code to find the
code your converter accepts.
Anvision ____________
Cable Star __________
Eagle ______________
Eastern International __
General Instrument ___
07, 08
07, 08
08
02
04, 05, 15, 23, 24, 25,
30, 36
Hamlin _____________
Jerrold _____________
12, 13, 34
04, 05, 15, 23, 24, 25,
30, 36
37
NOTE:
Depending on the model, year produced, brand, and type of
CATV converter, some models may not be compatible with the
remote control.
Macom _____________
Magnavox __________
07, 08, 19, 25, 28, 29,
32, 33, 40, 41
09
NSC _______________
Oak _______________
Oak Sigma __________
Panasonic __________
Philips _____________
L To Identify Your Cable Converter – Search Method.
(1) Slide TV-CATV switch on the remote to CATV.
(2) Press the POWER button on the cable converter to ON.
(3) Stand at least six feet away from the converter.
Point the remote towards the converter.
Hold down the DISPLAY and CH UP (8) at the same time. KEEP
HOLDING THE BUTTONS DOWN.
(4) Watch the Channel Number indicator on the converter.
Channel numbers will scan up when the converter has been
identified.
01, 16, 38
18
27, 39
07, 08, 19, 26, 28, 29,
32, 33, 40, 41
18, 20
07, 08
27, 43
12, 13
02
03, 22, 42
44
11
06
11
17, 21
Pioneer ____________
Randtek ____________
RCA _______________
Regal ______________
Regency ___________
Scientific Atlantic _____
Sony ______________
Sylvania ____________
Teknika ____________
Texscan ____________
Tocom _____________
Unika ______________
Viewstar ____________
Release the DISPLAY and CH UP (8) as soon as the channel
numbers start to scan up.
The converter’s remote control code number has been identified,
and the remote is ready to operate the converter.
TIPS ON IDENTIFYING YOUR CABLE CONVERTER:
Be Patient: a minute or two can seem a lot longer when you’re
waiting for something to happen, but the code should be identified
within two minutes. Remember, it is only a one-time set-up.
Be careful not to let the CATV converter scan more than five
channels when the indicator starts to move up. If you continue
holding down the DISPLAY and CH UP (8) after five channel
scans, the proper remote code can be passed up, and the two
minutes identify cycle will have to be repeated.
31
07, 08, 19, 26, 28, 29,
32, 33, 40, 41
14
Zenith______________
If a channel change does not occur on the cable converter within
two minutes, read the identifying instructions again and repeat
the steps. Should a channel change still not occur, the remote
will not operate with the desired converter.
NOTE:
Some satellite receivers can be operated by the REMOTE
CONTROL. If you have a Satellite Receiver, you can use the
above method to search for available channels.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Before Calling for Service
Check these items and see if you can correct trouble with a slight adjustment of the controls.
QUICK SERVICE CHECK LIST
POSSIBLE REMEDY
Try a new channel, if OK, then possible station trouble.
Is TV plugged in? Power at outlet?
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Is TV’s POWER button on?
Is antenna connected to terminal on the back of the set?
If outside antenna is being used, check for broken wire.
Check for local interference or external electrical noise.
Turn off with POWER button and then turn it on after about a minute.
Adjust COLOR control.
Adjust PICTURE control.
Check external Video/Audio products; look for loose / broken
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
connections leads. (Refer to pages 25 - 26.)
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Check batteries of Remote Control.
Press CATV/TV Select Switch to TV position.
Are audio cables connected firmly? Check the volume level.
Is SPEAKER ON? See page 13 - 14.
Change Closed Caption mode to “OFF” / Energy Save mode
to “OFF”.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Unplug the TV and plug it in again after two minutes.
NOTE:
• When viewing in TEXT mode, if no TEXT broadcast is being received, the screen may become dark and blank.
Should this occur, set the Closed Caption mode to “OFF”.
• If your TV does not work normally in such case of power failure, once turn power off and then return power on
again.
(Dark and Blank Picture)
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Antes de llamar al serviclo de reparaciones
Verifique estos items para ver si usted mismo puede solucionar el problema.
LISTA DE COMPROBACIONES
DE SERVICIO RAPIDO
POSIBLE SOLUCIÓN
Pruebe con otro canal y si todo está bien, el problema puede ser de
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
la emisora.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Está conectado el televisor? Llega electricidad al tomacorrientes?
Está conectado el interruptor del televisor?
Está conectado la antena al terminal del panel posterior del televisor?
Si utiliza una antena exterior, cerciórese de que el cable no esté
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
dañado.
Compruebe si hay interferencia local.
Desconecte el interruptor POWER y vuelva a conectarlo después de
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
transcurrir un minuto.
Adjuste el control de COLOR.
Adjuste el control de MATIZ.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Verifique los productos externos de Video/Audio, revise si hay fugas
de conexiones sueltas o rotas.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Compruebe el estado de las pilas del mando a distancia.
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
Pulse CATV/TV selector para situarlo sobre la posición TV.
Están bien conectados los cables de sonido? Compruebe el nivel del
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
volumen.
Está conectado el altavoz?
Desactive (OFF) el modo CLOSED CAPTION / Desactive (OFF) el
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
X
modo Ahorro de Energía (Energy Save).
Desenchufe el televisor y vuelva a enchufarlo despúes de dos minutos.
NOTA:
• Cuando se ve en modo TEXTO sin recibir emisiones de TEXTO, la pantalla puede ponerse en blanco y negro.
Si ocurriera ésto, ponga el modo CLOSED CAPTION en OFF.
• Si su televisor no funciona normalmente en caso de corte de energía eléctrica, desconecte una vez la
alimentación y vuelva a conectarla a continuación.
(Imagen oscura y en blanco)
32
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
33
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
34
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
35
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
36
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
37
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
38
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes:
39
Download from Www.Somanuals.com. All Manuals Search And Download.
Calling for Service
For location of the nearest Sharp Authorized Service, or to obtain product literature accessories, supplies, or customer assistance, please call
1-800-BE-SHARP.
Limited Warranty
Consumer Limited Warranty:
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand product (the “Product”), when
shipped in its original container, will be free from defective workmanship and materials, and agrees that it will, at its option, either repair
the defect or replace the defective Product or part thereof with a new or remanufactured equivalent at no charge to the purchaser for
parts or labor for the period(s) set forth below.
This warranty does not apply to any appearance items of the Product nor to the additional excluded item(s) set forth below nor to any
Product the exterior of which has been damaged or defaced, which has been subjected to improper voltage or other misuse, abnormal
service or handling, or which has been altered or modified in design or construction.
In order to enforce the rights under this limited warranty, the purchaser should follow the steps set forth below and provide proof of
purchase to the servicer.
The limited warranty described herein is in addition to whatever implied warranties may be granted to purchasers by law. ALL IMPLIED
WARRANTIES INCLUDING THE WARRANTIES OF MERCHANTABILITYAND FITNESS FOR USEARE LIMITED TO THE PERIOD(S)
FROM THE DATE OF PURCHASE SET FORTH BELOW. Some states do not allow limitations on how long an implied warranty lasts, so
the above limitation may not apply to you.
Neither the sales personnel of the seller nor any other person is authorized to make any warranties other than those described herein,
or to extend the duration of any warranties beyond the time period described herein on behalf of Sharp.
The warranties described herein shall be the sole and exclusive warranties granted by Sharp and shall be the sole and exclusive
remedy available to the purchaser. Correction of defects, in the manner and for the period of time described herein, shall constitute
complete fulfillment of all liabilities and responsibilities of Sharp to the purchaser with respect to the Product, and shall constitute full
satisfaction of all claims, whether based on contract, negligence, strict liability or otherwise. In no event shall Sharp be liable or in any
way responsible for any damages or defects in the Product which were caused by repairs or attempted repairs performed by anyone
other than an authorized servicer. Nor shall Sharp be liable or in any way responsible for any incidental or consequential economic or
property damage. Some states do not allow the exclusion of incidental or consequential damages, so that above exclusion may not
apply to you.
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAYALSO HAVE OTHER RIGHTS WHICH VARY FROM STATE TO
STATE.
Model Specific Section
Your Product Model Number & Description
: 32N-S500, 32 inch Color Television
(Be sure to have this information available when you need service
for your Product.)
Warranty Period for this Product
: One (1) year parts and 90 days labor for 25 inch models; one (1)
year parts and one (1) year labor for 27, 32, and 36 inch models.
The warranty period continues for an additional one (1) year, for a
total of two (2) years, with respect to the picture tube(s) in the
Product for parts only. Labor and service are not provided free of
charge for this additional period.
Additional Item(s) Excluded from Warranty Coverage (if any) : Non-rechargeable batteries.
Where to Obtain Service
: From a Sharp Authorized Servicer located in the United States. To
find the location of the nearest SharpAuthorized Servicer, call Sharp
toll free at 1-800-BE-SHARP.
What to Do to Obtain Service
: Contact your SharpAuthorized Servicer to obtain in-home service
for this Product. The Servicer will come to your home and if it is
necessary to remove the Product, the Servicer will reinstall it. Be
sure to have Proof of Purchase available.
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135
Printed in U.S.A.
TINS-7020MEZZ
T2418-A 0P06-AMP
40
Download from Www.Somanuals.com. All Manuals Search And Download.
|