MODEL
AR-207
DIGITAL LASER COPIER
OPERATION MANUAL
Page
• GETTING STARTED
• MAKING COPIES
• SPECIAL FEATURES
• STATUS INDICATORS
2
13
32
42
• GENERAL INFORMATION 51
• OPTIONAL EQUIPMENT 69
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTENTS
Page
GETTING STARTED
●
INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2
●
●
MAIN FEATURES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
PART NAMES AND FUNCTIONS . . . . . . . . . . . . . . . . . . .
4
– Overall layout . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
– Operation panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
COPIER INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . 8
CAUTIONS ON HANDLING . . . . . . . . . . . . . . . . . . . . . . . . 9
LOADING COPY PAPER . . . . . . . . . . . . . . . . . . . . . . 10
●
●
●
MAKING COPIES
●
AUDITING ACCOUNTS . . . . . . . . . . . . . . . . . . . . . . . . . . 13
●
NORMAL COPYING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
●
COPYING FROM THE ORIGINAL TABLE. . . . . . . . . . . . 19
●
REDUCTION/ENLARGEMENT/ZOOM. . . . . . . . . . . . . . . 23
●
BYPASS FEED (special paper). . . . . . . . . . . . . . . . . . . . 25
●
SORT/GROUP . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
●
INTERRUPTING A COPY RUN . . . . . . . . . . . . . . . . . . . . 29
●
AUTOMATIC EXPOSURE ADJUSTMENT . . . . . . . . . . . 30
●
TONER SAVE MODE . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
SPECIAL FEATURES
●
XY ZOOM . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
●
B/W REVERSE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
●
DUAL PAGE COPY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
●
ROTATION COPYING . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
●
2 IN 1 OR 4 IN 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
●
ERASE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
●
MARGIN SHIFT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
STATUS INDICATORS
●
TONER CARTRIDGE REPLACEMENT . . . . . . . . . . 42
●
MISFEED REMOVAL . . . . . . . . . . . . . . . . . . . . . . . . 44
●
DEVELOPER REQUIRED . . . . . . . . . . . . . . . . . . . . . 50
●
MAINTENANCE REQUIRED . . . . . . . . . . . . . . . . . . . 50
GENERAL INFORMATION
●
USER PROGRAMS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
– Settings for auditing accounts . . . . . . . . . . . . . . . . . . . . . . 54
POWER SAVE MODES . . . . . . . . . . . . . . . . . . . . . . . . . . 58
●
●
USER MAINTENANCE . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
●
COPIER TROUBLE? . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
●
SUPPLIES. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
– Types and sizes of copy paper . . . . . . . . . . . . . . . . . . . . . . 65
– Genuine supplies statement . . . . . . . . . . . . . . . . . . . . . . . . 66
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
●
OPTIONAL EQUIPMENT
●
SYSTEM CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . 70
●
250-SHEET PAPER FEED UNIT (AR-DE5)/
2x250-SHEET PAPER FEED UNIT (AR-DE6) . . . . . . . . . 71
INDEX. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 74
1
Download from Www.Somanuals.com. All Manuals Search And Download.
INTRODUCTION
This copier has been designed to provide convenient copying features in a minimum
amount of office space and with maximum operational ease. To get full use of all copier
features, be sure to familiarize yourself with this manual and the copier.
For quick reference during copier use, keep this manual in a handy location.
●
This copier can be used as a laser printer and as a facsimile machine by installing optional
components. However, this manual describes only the copier features. For description of the
printer features and facsimile features, see their separate manuals.
Depending on the country or area, some keys of this copier will be indicated with either an English
●
name or a symbol. ––Example: XY-ZOOM ( ) key, START (
) key.
Conventions used in this manual
In this manual, the following icons are used to provide the user with
information pertinent to the use of the copier.
Warns the user that injury to the user or damage to the
copier may result if the contents of the warning are not
properly followed.
Cautions the user that damage to the copier or one of its
components may result if the contents of the caution are
not properly followed.
Notes provide information relevant to the copier regarding
specifications, functions, performance, operation and such,
that may be useful to the user.
Indicates a letter displayed in the copy quantity display.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
MAIN FEATURES
High-speed laser copying
●
First-copy time is only 7.2 seconds (except in a power save mode or immediately after power on).
●
Copying speed is 20 copies/min., which adapts to business use, allowing improvement of working efficiency.
High-quality digital image
●
High-quality copying at 600 dpi is performed.
●
In addition to the automatic exposure mode, the manual exposure can be adjusted in five steps.
●
The photo mode copying function allows clear copying of delicate halftone original images such as monochrome
photos and color photos. Photo mode is adjustable in five steps.
Substantial copying features such as:
●
Copies up to ledger size originals from the original table, or through the 30 sheet automatic document feeder
●
Continuous copying up to 99 sheets
●
Scan once/print many to increase reliability and productivity
●
8 pre-set reduction and enlargement ratios plus 50% - 200% zoom in 1% increments
●
Automatic two-sided copying can be performed.
●
Electronic sorting eliminates the need for a bulky, mechanical sorter
●
Dual page copy mode for books, magazines and manuals
●
Editing features like XY zoom and black/white reverse
●
Digital editing features like 2 IN 1/4 IN 1 copying
Optional features
●
This copier can be used as a laser printer by installing an optional printer expansion kit.
●
This copier can be used as a facsimile machine by installing an optional facsimile expansion kit.
Environmentally friendly design
●
Paper output tray is housed in the copier for space saving.
●
Preheat and auto power shut-off modes are provided to reduce power consumption in standby mode and meet the
Energy Star Guidelines.
As an ENERGY STAR® Partner, SHARP has determined that this product meets
the ENERGY STAR® guidelines for energy efficiency.
The Environmental Choice Program guidelines are applied to the products only in
Canada.The products that meet the Environmental Choice Program guidelines carry
the logo shown to the left. The products without the logo may not meet the
Environmental Choice Program guidelines.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
PART NAMES AND FUNCTIONS
Overall layout
Document feeder cover
Open to make copies from the original table.
Side cover
Open to remove misfeeds and to service the copier.
Original table
All originals which cannot be copied from the RSPF
Side cover handle
Lift and pull to open the side cover.
must be copied here.
Bypass tray guides
Adjust to the width of the copy paper.
Handles
Use to move the copier.
Bypass tray
Paper including special paper (such as transparency
Power switch
Press to turn the copier power on and off.
film) can be fed from the bypass tray.
Operation panel
All copier controls are located here for easy operation.
Bypass tray extension
Pull out when feeding large paper such as 8-1/2" x 14"
and 11" x 17".
Paper output tray
Finished copies are deposited in the paper output tray.
Charger cleaner
Use to clean the transfer charger.
Front cover
Open to remove misfeeds and for copier servicing.
Document feeder tray
Holds up to 30 originals.
Paper trays
Each tray holds 250 sheets of copy paper.
Original guides
Adjust to the size of the originals.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
PART NAMES AND FUNCTIONS
Reversing single pass feeder (RSPF)
The fusing unit is hot.
Feeding roller cover
Open to remove misfed originals.
Take care in removing paper.
Exit area
Finished originals are output here.
Right side cover
Open to remove misfed originals.
Reversing tray
Pull out to remove misfed originals.
Paper guide
Open to remove misfed paper.
Toner cartridge lock release lever
Use to unlock the toner cartridge.
Accessories
Operation manual . . . . . . . . . . . . . . . . . . . . . . 1
Charger cleaner . . . . . . . . . . . . . . . . . . . . . . . . 1
Toner cartridge
Contains toner.
Photoconductive drum
Copy images are formed on the photoconductive drum.
Roller rotating knob
Turn to remove misfed paper.
Fusing unit release levers
Lower to remove misfed paper.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
PART NAMES AND FUNCTIONS
Operation
panel
Not used for the copier features.
INTERRUPT key and indicator (p. 29)
Interrupts a copy run.
Output tray full indicator
Indicates documents must be removed from the paper
output tray.
Copy quantity display
Displays the specified copy quantity during the ready
condition and displays the copy countdown as copies
B/W REVERSE key and indicator (p. 34)
Press to reverse the black and white areas.
are made. Also see items
and
.
XY-ZOOM key and indicator (p. 32)
Press to change the horizontal and vertical copy ratios
independently.
ZOOM indicator (p.24)
Lights up when a zoom ratio is set.
Copy ratio display key (p. 24)
SORT/GROUP key and indicators (p. 27)
Press and hold down during standby to display the copy
ratio in the copy quantity display.
Press to select the sort or group mode.
ORIGINAL DATA indicator
Blinks when the memory becomes full of scanned
Zoom keys (p. 24)
Use to select any reduction or enlargement copy ratio
original image data.
from 50% to 200% in 1% increments.
2 IN 1 / 4 IN 1 key and indicators (p. 37)
PAPER SIZE ENTER key (p.12)
Press to select the 2 in 1 or 4 in 1 mode.
Use to set the paper size in paper trays.
AUTO/MANUAL/PHOTO key and indicators
(p. 15)
AUDIT CLEAR key (p.13)
Closes an open account.
Use to sequentially select the exposure modes: AUTO,
MANUAL, or PHOTO.
PAPER SIZE indicators
Light up to show the selected copy paper size.
Light and dark keys and indicators (p. 15)
Use to adjust the MANUAL or PHOTO exposure level.
Alarm indicators
: Maintenance indicator (p. 50)
: Toner cartridge replacement required indicator
(p. 42)
Numeric keys
Use to select the desired copy quantity or to make user
program entries.
: Developer replacement required indicator
(p. 50)
: Paper required indicator (p. 10)
: Misfeed indicator (p. 44)
Zero key
Use as part of numeric keys to enter copy quantity.
Press during a continuous copy run to display the
number of copies completed in the current run.
Press and hold during standby to display the total output
count.
POWER SAVE indicator (p. 58)
Lights up when the copier is in a power save mode.
RSPF indicator (p. 14)
Lights up when originals are set in the document feeder
tray.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
PART NAMES AND FUNCTIONS
Not used for the copier features.
Depending on the country or area, some keys will be
indicated with either an English name or a symbol.
1st display
2nd display
The general location of misfed paper is shown by a
blinking red indicator (
).
DUAL PAGE COPY key and indicator (p. 35)
Use to make individual copies of two originals placed
side by side on the original table.
Press and hold down the key.
12,345
sheets output
Note:
ERASE key and indicators (p. 39)
Press to select the edge erase and/or the center erase
mode.
●
Two-sided copies are counted as two copies.
11" x 17" size copies are counted as two copies.
●
CLEAR key
MARGIN SHIFT key and indicator (p. 41)
Shifts text or image on the copy to leave a binding
margin on the left (or the top) side of the copy.
Clears the copy quantity display or terminates a copy
run.
START key and indicator
Copying is possible when the indicator is on.
Press to start copying.
ORIGINAL TO COPY key and indicators (p. 15)
Press to select one-sided and two-sided copy modes.
: Two-sided copies from one-sided
originals.
CLEAR ALL ( ) key
: Two-sided copies from two-sided
originals.
Clears all selected settings and returns the copier to the
initial settings.
: One-sided copies from two-sided
originals.
PRESET RATIO selector keys and indicators
(p. 24)
Use to sequentially select preset reduction/enlargement
copyratios:50%, 64%, 77%, 95%, 100%, 121%, 129%,
141%, 200%.
Initial settings
The copier assumes the initial settings when it is first turned
on, when the CLEAR ALL ( ) key is pressed, and ap-
ORIGINAL SIZE ENTER key and indicators
Use to input the original size.
proximately one minute* after the last copy is made in any
mode.
AUTO PAPER SELECT indicator
●
Copy ratio: 100%
Paper of the proper size will be automatically selected
depending on the original size and selected copy ratio
when this indicator is on.
●
Exposure: Automatic
●
Copy quantity: 0
●
All special copier modes: Off
●
Auto paper selection: On
Paper feed station: Previously selected paper tray
TRAY SELECT key (p. 15)
Use to manually select a paper tray.
●
* This time (auto clear time) can be changed. See page 51,
USER PROGRAMS.
AUTO IMAGE key and indicator
Press for automatic copy ratio selection.
Paper feed location/misfeed location indica-
tors (p. 44)
The selected paper feed location is shown by a lit
indicator ( ).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
COPIER INSTALLATION
Improper installation may damage the copier. Please note the following
during initial installation and whenever the copier is moved.
If the copier is moved from a cool place to a warm place, condensation may form inside the copier.
Operation in this condition will cause poor copy quality and malfunctions. Leave the copier at room
temperature for at least 2 hours before use.
Do not install your copier in areas that are:
●
damp, humid, or very dusty
●
exposed to direct sunlight
●
poorly ventilated
●
subject to extreme temperature or humidity changes, e.g., near an
air conditioner or heater.
The copier should be installed near an accessible power
outlet for easy connection.
Be sure to connect the power cord only to a power outlet that
meets the specified voltage and current requirements.
Also make certain the outlet is properly grounded.
Connect the copier to a power outlet which is not used
for other electric appliances. If a lighting fixture is
connected to the same outlet, the light may flicker.
Be sure to allow the required space around the machine for
servicing and proper ventilation.
4" (10cm)
A small amount of ozone is produced within the copier during operation.The emission level is insufficient
to cause any health hazard.
NOTE:
The present recommended long term exposure limit for ozone is 0.1 ppm (0.2 mg/m3) calculated as an
8 hr. time-weighted average concentration.
However, since the small amount that is emitted may have an objectionable odor, it is advisable to
place the copier in a ventilated area.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
CAUTIONS ON HANDLING
Be careful in handling the copier as follows to maintain the performance of
this copier.
Do not drop the copier, subject it to shock or strike it against any
object.
Store spare toner cartridges in a dark place without removing
from the package before use.
If they are exposed to direct sunlight, poor copies may result.
Do not touch the photoconductive drum (green portion).
Scratches or smudges on the drum will cause dirty copies.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
LOADING COPY PAPER
To save space, this copier has been designed with adjustable front-loading
trays, which are easily opened for paper loading. For best results, use only
SHARP recommended paper. (See page 65.)
The paper required ( ) indicator will light up when there is no copy paper
in the selected paper feed station, or when the selected paper tray is not
installed or is improperly installed.
When the paper size is changed in a paper tray, the size
of the paper must be entered by steps 8 through 11 on
page 12.If not, the edges of copies may become smudged
with toner.Also, the AUTO PAPER SELECT and the AUTO
IMAGE features will not function properly.
Gently lift and pull out the paper tray until it stops.
1
Push the pressure plate down until it locks in place.
2
Fan the copy paper and insert it into the tray. Make sure
the edges go under the corner hooks.
3
●
If you change to a different size of copy paper, the tray must be
adjusted. See the next page.
●
Set the paper along the guides.
Maximum height line
●
The tray holds up to 250 sheets of 21 lb. bond paper.
Do not load paper above the maximum height line.
Push the paper tray firmly back into the copier.
4
10
Download from Www.Somanuals.com. All Manuals Search And Download.
LOADING COPY PAPER
Changing the copy paper size in the tray
Gently lift and pull out the paper tray until it stops.
1
Push the pressure plate down until it locks in place.
2
Squeeze the lock lever of the front guide and slide the
front guide to match the width of the paper.
3
4
Left guide
Move the left guide to the appropriate slot as marked
on the tray.
●
When using 5-1/2" x 8-1/2" copy paper, load it into the uppermost
Front guide
paper tray. If other trays (including trays in optional paper feed units)
are used, paper misfeeds may occur.
●
When using 11" x 17" copy paper, store the left guide in the slot at
the left front of the paper tray.
Load copy paper into the tray.
5
6
Place the appropriate label to indicate the selected
paper size into the recess on the right front side of the
paper tray.
Push the paper tray firmly back into the copier.
7
11
Download from Www.Somanuals.com. All Manuals Search And Download.
LOADING COPY PAPER
To set the selected paper size, press the PAPER SIZE
ENTER key.
8
9
●
The selected paper feed location indicator will blink and the
corresponding paper size (which is currently set) indicator will light
up steadily. All other indicators will go out.
For paper size setting, ensure that the COPY mode
has been selected. However, if copying, printing or
facsimile printing is being performed, paper size setting
cannot be made even in the COPY mode. See Note
on page 63.
Use the TRAY SELECT key to select the paper tray of
which the paper size has been changed.
●
Each time the TRAY SELECT key is pressed, a paper tray will be
indicated with a blinking paper feed location indicator.
Use the ORIGINAL SIZE ENTER key to select the paper
size which is set.
10
11
●
Each time the ORIGINAL SIZE ENTER key is pressed, a paper size
will be indicated with a paper size indicator.
Press the START key and then the PAPER SIZE ENTER
key.
●
To change the paper size setting of another tray, repeat steps 9 to 10
after pressing the START key.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
AUDITING ACCOUNTS
If this copier has been programmed in the auditing mode, it will not function
until an assigned 3-digit account number has been entered. See page 54 for
setting the auditing mode.
If the copier has been programmed in the auditing mode, “
in the copy quantity display in the initial conditions.
” will appear
Enter your account number using the numeric keys.
1
2
●
As each digit is entered, the dashes in the copy quantity display will
disappear.
●
After the number is entered, the copy quantity display will change to
0.
●
If an unassigned number is entered, “
” will appear again in the
copy quantity display, indicating that the number was not accepted.
When copying is completed, press the AUDIT CLEAR
key.
●
“
” will appear again in the copy quantity display, indicating the
auditing mode.
●
In the interrupt copy mode (see page 29), press the INTERRUPT key
after an interrupt copy run is completed. All previous copier settings
will be restored and the previous account number will be active.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
NORMAL COPYING
positioned to the right or along the side guides. In this case
This copier has two document input stations –– a reversing
single pass feeder (RSPF) for automatic document feeding
and an original table for manual handling of bound
documents. The RSPF is designed to hold up to 30 originals
measuring from 5-1/2" x 8-1/2" to 11" x 17" and in the
weight range of 15 to 24 lbs.
the settings for location of margin and image rotation in
duplex copying may need to be changed to ensure the
images are produced in the desired orientation. See pages
22 and 41.
Special originals such as transparency film and tracing
paper should not be fed through the RSPF but should be
copied from the original table.
●
●
Be sure to remove any staples or paper clips from the
originals.
●
●
●
The bypass tray and any tray with non-standard size paper
cannot be used in the duplex copy mode.
●
DamagedorcrumpledoriginalsmaymisfeedintheRSPF.
It is recommended that these originals be copied from the
original table.
Beforeplacingcurledorwavyoriginalsintothedocument
feedertray,besuretoflattenthem.Ifnot,originalmisfeeds
may result.
Paper sizes that can be used in the duplex mode are 8-1/2"
x 11", 8-1/2" x 11"R, 8-1/2" x 14", and 11" x 17".
If the offset stack mode is enabled using user program No.
19, each set of copies will be offset from the previous set
in the sort and group modes.
●
●
For best feeding of originals which have binding holes
punched into them, insert them so that the holes are
Stream feeding mode
If the stream feeding mode has been enabled using user program No. 4, the RSPF indicator
will continue to blink for approximately 5 seconds after feeding of all originals is completed.
While this indicator is blinking, any new originals placed in the RSPF will be fed and copied
automatically. See page 51, USER PROGRAMS.
Power on
Turn the power switch on.
●
It will take about 35 seconds for the copier to warm up.
However, you can make desired settings and press the START key
during warm-up. Copying will start after warm-up.
1
Power on
●
If the copier has been programmed in the auditing mode, the START
key indicator will not light up and “
” will appear in the copy
quantity display. Enter an assigned 3-digit account number. See page
13.
If an optional printer expansion kit or facsimile expansion kit is
installed, when the power is already on and all indicators except the
POWER SAVE indicator are off, the copier is in the auto power shut-
off mode. Press the START key in this case. See page 58, POWER
SAVE MODES.
●
One-sided copies from one-sided originals
Ensure that no original is left on the original table.
1
Adjust the original guides to the size of the originals.
2
3
Set the originals face up in the document feeder tray.
●
TheRSPFindicatorwilllightup. Ifthisindicatordoesnotlightup, the
originals are not properly set, or the RSPF is not properly closed.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
NORMAL COPYING
●
●
The ORIGINAL SIZE indicator for the detected original size will
light up, and the paper tray with the corresponding paper size will be
automatically selected.
TheautopaperselectfunctioncanbedisabledusinguserprogramNo.
8. If this function has been disabled, use the TRAY SELECT key to
select the desired paper tray. See page 51, USER PROGRAMS.
●
●
To copy onto a different size paper, use the TRAY SELECT key to
make the selection.
The bypass tray cannot be automatically selected.
Ensurethattheone-sidedtoone-sidedcopyingmodeis
selected in the ORIGINAL TO COPY section of the
operation panel.
4
5
●
When no indicator in the ORIGINAL TO COPY section is lit, the
one-sided to one-sided copying mode is selected.
Adjust the copy density.
●
Thiscopierhasthreeexposuremodestochoosefrom—AUTOMATIC,
MANUAL, and PHOTO.
●
Automatic exposure is the standard initial setting for this copier. In
this mode, the characteristics of the original are “read” by the
exposure system and adjustments are automatically made. This
optimizes the contrast of the copied images by reducing the effect of
colored or shaded background areas. See page 30 to adjust the
automatic exposure level.
●
Formanualdensityadjustment, presstheAUTO/MANUAL/PHOTO
key to select MANUAL and adjust with the light ( ) and dark (
keys as desired.
)
●
●
For photographs, select PHOTO and then adjust with the light (
)
and dark (
) keys as desired.
There are 5 exposure steps indicated by 3 indicator lights. (The
indicators light up one or two at a time.)
If exposure level 2 is selected, the two left-handmost indicators for
that level will light up simultaneously. Also, if level 4 is selected, the
two right-handmost indicators for that level will light up
simultaneously.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
NORMAL COPYING
Set the number of copies using the numeric keys.
6
7
●
A single copy can be made with the initial setting, i.e., when “0” is
displayed.
●
Press the CLEAR (
) key to clear an entry if a mistake is made.
Press the START key.
●
The number in the copy quantity display will decrease by 1 each time
a copy is made.
●
Press the CLEAR (
) key to stop copying in the middle of a run.
Two-sided copies from one-sided originals
Ensure that no original is left on the original table.
Adjusttheoriginalguidestothesizeoftheoriginalsand
set the originals face up in the document feeder tray.
1
●
5-1/2" x 8-1/2" size copy paper cannot be used.
●
If an uneven number of originals is set, the last copy will be one-sided.
Use the ORIGINAL TO COPY key to select
.
2
Theimageofeveryfrontsidecanberotated180°using
the image rotation feature. This feature is useful when
theoriginalsandcopiesareinthelandscape(horizontal)
orientation and the two-sided copies are to be read by
turning them left to right rather than top to bottom.
To set this feature, see page 22. This feature can also
be set using user program No. 20.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
NORMAL COPYING
Set the number of copies and press the START key.
●
To stop a copy run during duplex copying, press the CLEAR (
key.
)
3
To cancel the duplex mode, press the ORIGINAL TO
COPY key repeatedly until the indicators in the
ORIGINAL TO COPY section all go out.
Two-sided copies from two-sided originals
Ensurethatnooriginalisleftontheoriginaltable.Adjust
the original guides to the size of the originals and set the
originals face up in the document feeder tray.
1
2
●
5-1/2" x 8-1/2" size original or copy paper cannot be used.
Use the ORIGINAL TO COPY key to select
.
●
When this mode is selected, the RSPF indicator will light up even if no
original has been set in the document feeder tray.
Set the number of copies and press the START key.
3
●
Be sure not to touch the originals as they move on the reversing tray.
This may cause misfeeds.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
NORMAL COPYING
One-sided copies from two-sided originals
Ensure that no original is left on the original table.
Adjusttheoriginalguidestothesizeoftheoriginalsand
set the originals face up in the document feeder tray.
1
●
5-1/2" x 8-1/2" size original cannot be used.
Use the ORIGINAL TO COPY key to select
.
2
3
●
When this mode is selected, the RSPF indicator will light up even if no
original has been set in the document feeder tray.
Theimageofeveryfrontsidecanberotated180°using
the image rotation feature. This feature is useful when
theoriginalsandcopiesareinthelandscape(horizontal)
orientation.
To set this feature, see page 22. This feature can also
be set using user program No. 20.
Set the number of copies and press the START key.
●
Press the CLEAR key to stop copying in the middle of a run.
●
Be sure not to touch the originals as they move on the reversing tray.
This may cause misfeeds.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYING FROMTHE ORIGINALTABLE
Use the original table for copying bound documents and other originals that
cannot be set in the RSPF.
Using the original table
Turn the power switch on.
●
It will take about 35 seconds for the copier to warm up. However, you
can make desired settings and press the START key during warm-up.
Copying will start after warm-up.
If the copier has been programmed in the auditing mode, the START
1
Power on
●
key indicator will not light up and “
” will appear in the copy
quantity display. Enter an assigned 3-digit account number. See page
13.
If an optional printer expansion kit or facsimile expansion kit is
installed, when the power is already on and all indicators except the
POWER SAVE indicator are off, the copier is in the auto power shut-
off mode. Press the START key in this case. See page 58, POWER
SAVE MODES.
●
Place the original face down on the original table. Align
it with the original size scale.
2
3
●
The ORIGINAL SIZE indicator for the size detected will light up.
Image loss (max. 5/32" (4 mm)) can occur at the leading and trailing
●
edges of the copies. Also image loss (max. 5/32" (4 mm) in total) can
occur along the other edges of the copies.
Close the document feeder cover.
●
Paper matching the size of the original will be automatically selected
when the auto paper select function is enabled. To copy onto paper of
a different size, press the TRAY SELECT key.
●
The auto paper select function can be disabled using user program
No. 8. If this function is disabled, use the TRAY SELECT key to
select the desired paper tray. See page 51, USER PROGRAMS.
●
The bypass tray cannot be automatically selected.
Ensure that the desired paper tray is selected.
4
19
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYING FROM THE ORIGINAL TABLE
Adjust the copy density.
5
●
Thiscopierhasthreeexposuremodestochoosefrom—AUTOMATIC,
MANUAL, and PHOTO.
●
Automaticexposureisthestandardinitialsettingforthiscopier.Inthis
mode, the characteristics of the original are “read” by the exposure
system and adjustments are automatically made. This optimizes the
contrast of the copied images by reducing the effect of colored or
shaded background areas. See page 30 to adjust the automatic expo-
sure level.
●
For manual copy density adjustment, press the AUTO/MANUAL/
PHOTO key to select MANUAL and adjust with the light ( ) and
dark ( ) keys as desired.
●
●
For photographs, select PHOTO and then adjust with the light (
and dark ( ) keys as desired.
)
There are 5 exposure steps indicated by 3 indicator lights. (The
indicators light up one or two at a time.)
Ifexposurelevel2isselected,thetwoleft-handmostindicatorsforthat
level will light up simultaneously. Also, if level 4 is selected, the two
right-handmost indicators for that level will light up simultaneously.
Set the number of copies using the numeric keys.
6
7
●
A single copy can be made with the initial setting, i.e., when “0” is
displayed.
●
Press the CLEAR ( ) key to clear an entry if a mistake is made.
Press the START key.
●
The number in the copy quantity display will decrease by 1 each time
a copy is made.
●
Press the CLEAR key to stop copying in the middle of a run.
●
To repeat the same copy sequence for a different original, simply
replace the original and press the START key.
●
If the paper in the selected tray runs out during the copy run and no
other tray contains the same size paper, the bypass tray can be selected
using the TRAY SELECT key.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYING FROM THE ORIGINAL TABLE
Two-sided copies from one-sided originals
Place the first original face down on the original table
and close the document feeder cover.
1
Use the ORIGINAL TO COPY key to select
.
2
3
4
Ensure that the desired paper tray is selected.
●
Papersizesthatcanbeusedintheduplexmodeare8-1/2"x11", 8-1/2"
x 11"R, 8-1/2" x 14", and 11" x 17".
●
●
5-1/2" x 8-1/2" size paper cannot be used in the duplex mode.
The bypass tray cannot be used in the duplex mode.
Set the number of copies and press the START key.
●
The
indicator will blink.
●
The copy will not be output until both sides have been scanned.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
COPYING FROM THE ORIGINAL TABLE
Placethesecondoriginalfacedownontheoriginaltable
and press the START key again to copy onto the other
side.
5
●
Tostopacopyrunduringduplexcopying,presstheCLEAR( )key.
●
If an uneven number of originals is set, press the ORIGINAL TO
COPY key at the end of the copy run to output the last copy.
●
To cancel the duplex mode, press the ORIGINAL
TO COPY key repeatedly until the indicators in the
ORIGINAL TO COPY section all go out.
The image of every front side can be rotated 180°
●
using the image rotation feature. This feature is
useful when the originals and copies are in the
landscape(horizontal)orientationandthetwo-sided
copies are to be read by turning them left to right
rather than top to bottom.
To set this feature, follow the procedure below. This
feature can also be set using user program No. 20.
Setting image rotation in duplex copying
Press and hold down the ORIGINAL TO COPY key for
approximately 5 seconds until the
blink and the currently selected parameter number will
blink in the copy quantity display.
indicator will
1
2
3
4
Select the desired parameter using the numeric keys.
●
0: OFF
1: ON
The factory default setting is 0.
Press the START key.
●
The selected parameter will be steadily lit.
Press the ORIGINAL TO COPY key.
●
The
indicator will stop blinking.
The image rotation in duplex copying can be also set
using user program No. 20. See page 51.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
REDUCTION/ENLARGEMENT/ZOOM
Reduction and enlargement ratios can be selected either automatically with
the AUTO IMAGE key or manually with the PRESET RATIO selector (
)keysand/orthezoom( )keys.Thezoomfunctionenablesprecise
copy ratio selection from 50% to 200% in 1% increments.
,
,
Automatic
Place the original in the document feeder tray or on the
original table.
1
●
The ORIGINAL SIZE indicator for the detected size will light up.
Use the TRAY SELECT key to select the paper tray with
the desired paper size.
2
3
●
This feature will not work when copy paper of non-standard size is
used or the bypass tray is used.
Press the AUTO IMAGE key.
●
The copy ratio will be automatically set.
●
If a PRESET RATIO indicator is blinking, part of the original image
may not be copied.
●
If user program No.7 is not set and the orientation of
the original does not correspond to standard
reduction/enlargement ratios for the selected paper
tray,theORIGINALSIZEindicatorwillblink.Change
the orientation of the original.
Set the number of copies.
Press the START key.
4
5
●
To cancel the automatic reduction/enlargement
mode, press the AUTO IMAGE key again.
When copying from the RSPF with this feature, the
●
automatic reduction/enlargement mode will be
automatically canceled after copying is complete.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
REDUCTION/ENLARGEMENT/ZOOM
Manual
Place the original in the document feeder tray or on the
original table.
1
Use the PRESET RATIO selector (
,
) keys and the
zoom (
,
) keys to select the desired copy ratio.
2
●
To select a preset reduction or enlargement copy ratio, press the
or
key repeatedly until the indicator for the desired copy ratio is
lit.
A. Preset reduction ratios are: 95%, 77%, 64%, and 50% .
B. Preset enlargement ratios are: 121%, 129%, 141%, and 200%.
C. Zoom ratios: Any ratio from 50% to 200% can be set, in 1%
increments. Press the
ratio, then press the
to increase the ratio.
or
key to set the approximate
key
key to decrease the ratio or the
●
When a zoom (
,
) key is pressed, the ZOOM indicator will light
up and the zoom ratio will be displayed in the copy quantity display
for at least two seconds.
●
●
To verify a zoom setting without changing the zoom ratio, press and
hold down the copy ratio display ( ) key. When the key is released,
the display will return to the copy quantity display.
To decrease or increase the zoom ratio rapidly, press and hold down
the
or
key. However the value will stop at the preset reduction
or enlargement ratios. To move beyond these ratios, release the key
and then press and hold it down again.
D. Same-size reset: Press the
copy ratio returns to 100%.
or
key repeatedly until the
Ensure that the desired paper tray is selected.
3
●
If the auto paper select function has been enabled, the appropriate
copy paper size will have been automatically selected based on the
original size and the selected copy ratio. If the selected PRESET
RATIO indicator or the ZOOM indicator blinks, the selected copy
image is too large for the copy paper size.
●
If the auto paper select function has been disabled or if copying onto
a different size paper, use the TRAY SELECT key to select the paper
feed station with the desired paper size.
Set the number of copies and press the START key.
4
24
Download from Www.Somanuals.com. All Manuals Search And Download.
BYPASS FEED (special paper)
The bypass tray is used to copy onto transparency film, labels, and other
special purpose papers. Up to 100 sheets of standard copy paper can be set
in the bypass tray.
For special purpose papers, the original image must be
smaller than the paper or media for copying.
If the original image is bigger than the paper or media, this
may cause smudges on the edges of the copies.
Also for standard copy paper, smudges may appear if the
copy paper is not at least as large as the original image.
Unfold the bypass tray.
1
●
When feeding 8-1/2" x 14" or 11" x 17" sized paper, extend the bypass
tray.
Set the paper guides to the copy paper width.
2
Insert the copy paper (print face down) all the way into
the bypass tray.
3
●
Up to 100 sheets of standard copy paper measuring from 5-1/2" x
8-1/2" to 11" x 17" can be loaded in the bypass tray.
●
Transparency film, labels, and other special purpose papers (except
envelopes) must be fed individually.
Up to 10 envelopes can be set.
●
Whenaddingpaper, firstremoveremainingpaper, combineitwiththe
paper to be added and then reload as a single stack.
●
When loading envelopes, make sure that they are straight and flat.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
BYPASS FEED (special paper)
Press the TRAY SELECT key to select the bypass tray.
4
Leave the copy quantity at 0 if using special papers. Set
the number of copies if using standard copy paper or
envelopes.
5
6
Press the START key.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
SORT/GROUP
This copier has two sorter modes for different copying jobs: one sorts copies
intosetsmatchingthesequenceoftheoriginalsandthesecondgroupscopies
by originals.
The sort/group feature cannot be used with the dual page copy feature.
To change the SORT/GROUP mode, press the SORT/GROUP key to select
the desired mode.
●
Thecapacityofthepaperoutputtrayis250sheets(150sheetsifanoptional
job separator tray kit (AR-TR2) is installed). When the number of copies
output reaches this limit in a sort or a group copy run, copying will stop, the
output tray full (
will blink.
) indicator will light and the START key indicator
Remove the copies from the paper output tray and press the START key
to resume copying.
Sort mode
1
2
3
Each set of copies will be sequentially delivered to the
paper output tray.
3
1
2
2
1
3
1
2
3
Group mode
1
1
1
All copies of the same originals will be grouped in the
paper output tray.
3
2
2
2
2
1
3
3
3
Offset mode
Offset stack
1
1
If the offset stack mode is enabled using user program
No. 19, each copy will be offset by approximately 1 inch
(25 mm). When copying in the sort mode, each collated
set of copies will be stacked offset from the previous
set. When copying in the group mode, copies will be
offset and stacked in groups of multiple copies from the
same original.
3
2
1
2
1
If the offset stack mode is disabled, copies will not be
offset.
Non-offset mode
1
The offset stack mode is enabled in the factory default
setting.
3
2
1
1
27
Download from Www.Somanuals.com. All Manuals Search And Download.
SORT/GROUP
Copying in the sort mode
Whencopyinginthesortmode,theoriginalimagewillbestoredinthecopier
memory each time an original is scanned and copying will start after all
originals have been scanned.
Set the originals face up in the document feeder tray.
1
●
The original table cannot be used for sort copying.
Press the SORT/GROUP key to select the SORT mode.
2
Ensure that the desired copy paper size is selected.
3
4
Set the number of copies and press the START key.
●
Copying will start after the originals have been scanned. Up to 30
sheets of originals can be scanned. (If originals are fed continuously
using the stream feeding mode, up to approximately 60 sheets of
8-1/2" x 11" originals can be scanned. However, when copying
originals which require more memory such as photographs, the
number of originals which can be scanned will be less.) When the
memory becomes full of scanned original image data, the ORIGINAL
DATA indicator will blink.
When the ORIGINAL DATA indicator blinks, the copier will stop
scanning. Tostartcopyingofscannedoriginals, presstheSTARTkey.
To cancel copying, press the CLEAR or CLEAR ALL key.
28
Download from Www.Somanuals.com. All Manuals Search And Download.
INTERRUPTING A COPY RUN
INTERRUPT is used to interrupt a long copy run so that another job can be
done.
●
SORT or GROUP cannot be selected during interrupt copying.
●
INTERRUPT will not function during two-sided copying.
●
Two-sided copying cannot be performed during INTERRUPT copying.
Press the INTERRUPT key.
●
The copier will return to the initial settings.
If this copier has been programmed in the auditing mode using user
1
●
program No. 10, “
” will appearinthe copyquantity display. Enter
your account number using the numeric keys. The number of copies
of the interrupt copying will be accumulated against this account
number. See page 13.
WhentheRSPFisbeingused, thecopierwillstopaftercompletingthe
copying of the original which has been fed into the RSPF.
●
When the copier stops, remove the original(s) and set
the original(s) for interrupt copying.
2
3
4
Select the desired available copier functions.
Set the number of copies.
Press the START key.
5
●
The interrupt copies will be offset from the previous copies when user
program No. 19 is enabled. See page 51.
When all INTERRUPT copies are finished, press the
INTERRUPT key again to cancel the INTERRUPT mode,
and remove the original used for interrupt copying.
6
7
●
The previous copy quantity, copy ratio, copy density, and paper size
will be automatically restored.
Replacetheoriginalfortheinterruptedjobandpressthe
START key to resume copying.
29
Download from Www.Somanuals.com. All Manuals Search And Download.
AUTOMATIC EXPOSURE ADJUSTMENT
The automatic exposure level can be adjusted to suit your copying needs.
This level is set for copying from the original table and copying from the
RSPF respectively. To set the level for the RSPF, place an original in the
document feeder tray and make sure that the RSPF indicator lights up
before proceeding to step 1. To set the level for the original table, ensure
that the RSPF indicator does not light up.
Press the AUTO/MANUAL/PHOTO key to select the
PHOTO mode.
1
Press and hold down the AUTO/MANUAL/PHOTO key
for approximately 5 seconds.
2
●
The PHOTO indicator will go out and the AUTO indicator will begin
to blink.
●
One or two exposure indicators corresponding to the current auto-
matic exposure level will light up. The factory default setting is level
“3”.
Press the light ( ) or dark ( ) key to lighten or darken
the automatic exposure level as desired.
3
Press the AUTO/MANUAL/PHOTO key.
4
●
The AUTO indicator will stop blinking and will light up steadily.
●
This automatic exposure level will remain in effect until you change
it again by this procedure.
30
Download from Www.Somanuals.com. All Manuals Search And Download.
TONER SAVE MODE
Thismodereducestonerconsumptionbyapproximately10%intheautomatic
and manual exposure modes. Copies will be lighter but still adequate for
generaluse. SelectionofthismodedoesnotaffectthePHOTOmode. Follow
the procedure below for setting the toning level.
Press the AUTO/MANUAL/PHOTO key to select the
MANUAL mode.
1
2
3
4
Press and hold down the AUTO/MANUAL/PHOTO key
for approximately 5 seconds.
●
The MANUAL indicator will go out and the PHOTO indicator will
begin to blink.
●
The exposure indicator marked “5” will light up, indicating that the
standard toner mode is active.
To enter the toner save mode, press the light ( ) key.
●
The exposure indicator marked “1” will light up, indicating that the
toner save mode is selected.
Press the AUTO/MANUAL/PHOTO key.
●
ThePHOTOindicatorwillstopblinkingandwilllightupsteadily.The
toner save mode is now active.
●
To return to the standard mode, repeat the procedure but use the dark
(
) key to select exposure level “5” in step 3.
31
Download from Www.Somanuals.com. All Manuals Search And Download.
XY ZOOM
The XY ZOOM feature allows the horizontal and vertical copy ratios to be
changed independently. This feature cannot be used with the 2 in 1 or 4 in 1
feature.
Original
Copy
To use the XY ZOOM feature with the DUAL PAGE COPY feature, set the
DUAL PAGE COPY feature first and then the XY ZOOM feature.
(Enlargement cannot be set.)
Place the original in the document feeder tray or on the
original table.
1
Press the XY-ZOOM key.
2
3
4
●
The current value for the vertical direction will be displayed in the
copy quantity display.
UsethePRESETRATIOselector(
(
direction.
,
)keysandzoom
,
) keys to change the copy ratio in the vertical
●
PressaPRESETRATIOselector (
or
)keytosetanapproximate
ratio, then press the
key to decrease the ratio or key to increase
the ratio. The copy ratio will be displayed in the copy quantity display.
Press the copy ratio display ( ) key.
●
The selected ratio for the vertical direction will be entered and the
current value for the horizontal direction will be displayed in the copy
quantity display.
32
Download from Www.Somanuals.com. All Manuals Search And Download.
XY ZOOM
UsethePRESETRATIOselector(
,
)keysandzoom
(
,
) keys to change the copy ratio in the horizontal
5
6
7
8
9
directioninasimilarmannerasfortheverticaldirection.
Press the copy ratio display ( ) key.
●
The selected ratio for the horizontal direction will be entered and the
display will change to the copy quantity display.
●
To verify the copy ratios, press and hold down the copy ratio display
(
)key.Theverticalandhorizontalratioswillbealternatelydisplayed.
Ensure that the desired paper tray is selected.
Set the number of copies.
Press the START key.
●
To change the copy ratios again, press a PRESET
RATIO selector (
,
) key or a zoom (
,
)
key.Then,performstep3andthesucceedingsteps.
To cancel this function, press the XY-ZOOM key
again.
●
33
Download from Www.Somanuals.com. All Manuals Search And Download.
B/W REVERSE
Original
Copy
The B/W REVERSE feature is used to reverse black and white areas.
●
When the B/W REVERSE feature is selected, the exposure mode will be
automatically set to the MANUAL mode. Other exposure modes cannot
be selected.
Even if this feature is canceled, the MANUAL mode will not auto-
matically be canceled.
Place the original in the document feeder tray or on the
original table.
1
Press the B/W REVERSE key.
2
3
4
Ensure that the desired paper tray is selected.
Make all other desired copier selections and press the
START key.
34
Download from Www.Somanuals.com. All Manuals Search And Download.
DUAL PAGE COPY
Original
Copy
TheDUALPAGECOPYfeatureproducesindividualcopiesoftwodocuments
placed side by side on the original table. It is especially useful when copying
books and other bound documents. This feature cannot be used with the 2 in
1 or 4 in 1 feature and sort/group feature. If the AUTO IMAGE feature has
been selected, this feature cannot be selected.
To use the DUAL PAGE COPY feature with the XY ZOOM feature, set the
DUAL PAGE COPY feature first and then the XY ZOOM feature.
(Enlargement cannot be set.)
Place the originals on the original table with the center
of the two pages aligned with the paper size index (
1
81/2 ). Close the document feeder cover.
●
Set the page to be copied first to the right of the paper size index mark.
Press the DUAL PAGE COPY key.
2
3
4
●
Check to be sure that 8-1/2" x 11" sized paper is selected.
Set the number of copies.
Press the START key.
35
Download from Www.Somanuals.com. All Manuals Search And Download.
ROTATION COPYING
If user program No. 7 is set, the image of the original will rotate when the
orientation of the original does not match that of the copy paper. Rotation
copying will function only if the AUTO PAPER SELECT mode or AUTO
IMAGE mode has been selected. Even if user program No. 7 is not set,
rotation copying will function when the 2 in 1 or 4 in 1 function is selected.
See page 51. However, if enlargement copying onto a paper size larger than
8-1/2" x 11" is performed, the image cannot be rotated.
Original
Paper
When this occurs, the detected size and orientation of the original will be
indicatedbyasteadilylightedindicatorandaflashingindicatorwillshowthe
requiredorientationoftheoriginal. Theoriginalmustberotated90°tomatch
the flashing indicator to prevent image loss on the copies.
Copy
Example: Copying from an 11" x 17" original
onto 8-1/2" x 11" paper
36
Download from Www.Somanuals.com. All Manuals Search And Download.
2 IN 1 OR 4 IN 1
2 in 1 copying
The 2 in 1 or 4 in 1 feature is used to copy 2 or 4 originals, collectively in a
specified order, onto one sheet.
●
These features cannot be used with the dual page copying, XY zoom,
erase, or margin shift features.
Copies can be made with or without the border lines shown in the
Pattern
Pattern
●
illustration. See user program No. 6 on page 51.
●
Theorderoforiginalswhichwillbearrangedonthecopiescanbeselected
by user programs. There are two patterns of layout for 2 in 1 copying and
four patterns of layout for 4 in 1 copying. See user program No. 17 and 18
on page 51.
●
The 2 in 1 or 4 in 1 feature operates only in the sort or group mode. If the
2 in 1 or 4 in 1 feature is selected when either the sort or group mode has
not been selected, the group mode will be automatically selected.
Pattern
Pattern
4 in 1 copying
Pattern
Pattern
Pattern
Pattern
Set the originals face up in the document feeder tray.
1
●
The original table cannot be used for the 2 in 1 or 4 in 1 feature.
Use the TRAY SELECT key to select the paper tray with
the desired paper size.
2
3
●
The bypass tray and any tray with non-standard size paper cannot be
used with the 2 in 1 or 4 in 1 feature.
To confirm or set the layout pattern for 2 in 1 copying,
first ensure that both the 2 IN 1 and 4 IN 1 indicators are
not lit then press and hold the 2 IN 1 / 4 IN 1 key for more
than 5 seconds.
●
The2IN1indicatorwillblinkandthecurrentlyselectedlayoutpattern
number will blink in the copy quantity display.
To confirm or set the layout pattern for 4 in 1 copying,
use the 2 IN 1 / 4 IN 1 key to light the 2 IN 1 indicator then
press and hold the 2 IN 1 / 4 IN 1 key for more than 5
seconds.
●
The 4 IN 1 indicator will blink and the currently selected layout
pattern number will blink in the copy quantity display.
37
Download from Www.Somanuals.com. All Manuals Search And Download.
2 IN 1 OR 4 IN 1
Enter the desired pattern number using a numeric key.
4
●
The entered number will blink in the copy quantity display. For layout
pattern numbers, see the previous page.
Press the START key.
5
6
●
The entered number will light up steadily.
Press the 2 IN 1 / 4 IN 1 key to complete the selection.
●
The copy ratio will be calculated automatically. If the calculated copy
ratio is less than 50%, part of original image may not be copied
because the smallest copy ratio is 50%.
Set the number of copies.
7
8
Press the START key.
●
Copying will start after the originals have been scanned. Up to 30
sheets of originals can be scanned. (If originals are fed continuously
using the stream feeding mode, up to approximately 60 sheets of
8-1/2" x 11" originals can be scanned. However, when copying
originals which require more memory such as photographs, the
number of originals which can be scanned will be less.) When the
memory becomes full of scanned original image data, the ORIGINAL
DATA indicator will blink.
When the ORIGINAL DATA indicator blinks, the copier will stop
scanning. To start copying of scanned originals, press the START
key. To cancel copying, press the CLEAR or CLEAR ALL key.
38
Download from Www.Somanuals.com. All Manuals Search And Download.
ERASE
This copier has an edge erase mode and a center erase mode.
Edge erase
●
Edge erase can be used to eliminate shadow lines around the edges of
copies caused when thick paper or a book is used as an original.
●
A
A
Center erase can be used to eliminate the shadow produced by the
bindings of bound documents.
●
Edge + center erase can be used to eliminate shadow lines around the
edges of copies and to eliminate the shadow at the center of copies.
Center erase
●
The erase width can be set from 0" to 1" in five steps using user program
No. 16. See page 51.
A B
A B
A B
●
This feature cannot be used with the 2 in 1 or 4 in 1 feature.
Edge + Center erase
A B
Place the original on the original table and close the
document feeder cover.
1
●
The RSPF can also be used for this feature.
Press the ERASE key to select the desired erase mode.
2
3
●
To select the EDGE + CENTER ERASE mode, press the ERASE key
until both the EDGE and CENTER indicators light up.
Ensure that the desired copy paper size is selected.
●
The bypass tray and any tray with non-standard size paper cannot be
used for this feature.
39
Download from Www.Somanuals.com. All Manuals Search And Download.
ERASE
Set the number of copies.
4
5
Press the START key.
40
Download from Www.Somanuals.com. All Manuals Search And Download.
MARGIN SHIFT
Original
Copy
The MARGIN SHIFT feature automatically shifts the text or image to
increase the margin by approximately 1/4".
●
The location of the margin to be increased can be selected to be either at
the left edge or the top of the page. To select the location, see step 2 below.
This feature cannot be used with the 2 in 1 or 4 in 1 feature.
A
A
●
Expanded margin
A
Place the original in the document feeder tray or on the
original table.
Left margin is expanded here.
1
●
Whencopyingfromtheoriginaltableandthemarginistobeincreased
on the left side, set the original face down so that the margin side is
positioned at the right side.
●
If top is selected, set the margin to be expanded to the rear side of the
original table or the document feeder tray.
To confirm or set the location of the margin, press and
holdtheMARGINSHIFTkeyforapproximately5seconds
until the MARGIN SHIFT indicator will blink.
2
●
The currently selected number of the margin location will blink in the
copy quantity display.
1: Left
2: Top
Select the desired parameter using the numeric keys,
and press the START key.
●
The selected parameter will be steadily lit.
Press the MARGIN SHIFT key.
●
The MARGIN SHIFT indicator will stop blinking.
The location of the margin can be also set using user
program No. 22. See page 51.
PresstheMARGINSHIFTkeyandensurethatthedesired
copy paper size is selected.
3
4
Set the number of copies and press the START key .
41
Download from Www.Somanuals.com. All Manuals Search And Download.
TONER CARTRIDGE REPLACEMENT
When the toner cartridge replacement required ( ) indicator lights up,
For best copying results, be sure to use only
SHARP Genuine Supplies which are designed,
engineered and tested to maximize the life and
performance of SHARP copiers. Look for the
Genuine Supplies label on the toner package.
replacement of the toner cartridge will be needed soon. Obtain a new
cartridge. When the toner cartridge replacement required ( ) indicator
blinks, the toner cartridge must be replaced before copying can be resumed.
Replace the toner cartridge by following the procedure below.
During a long copy run of a dark original, the
indicator
may blink and the copier stop, even though toner is left. The
copierwillfeedtonerupto2minutesandthentheSTART key
indicatorwilllightup.PresstheSTARTkeytorestartcopying.
GENUINE SUPPLIES
Open the bypass tray. Lift slightly on the side cover
and slide the cover out until it stops.
1
2
3
4
Push gently on both sides of the front cover to open the
cover.
Push the toner cartridge lock release lever and pull the
toner cartridge out. Remove the toner cartridge while
supportingitwiththelefthandatthegreenlabelposition.
Toner cartridge lock
release lever
●
For disposal of the old toner cartridge, contact your dealer.
Remove the new toner cartridge from the bag. Hold the
cartridge on both sides and shake it horizontally four or
five times.
4 or 5 times
42
Download from Www.Somanuals.com. All Manuals Search And Download.
TONER CARTRIDGE REPLACEMENT
Gently insert the toner cartridge along the guides until
it locks in place while pushing the lock release lever.
5
6
7
If dirt or dust is adhered to the toner cartridge, remove
it before installing the cartridge.
Pullouttheshutterandremoveitfromthetonercartridge
as shown in the illustration.
Close the front cover by pushing both sides with your
hands and then close the side cover by pressing the
handle on the cover. The
indicator will go out.
When closing the covers, be sure to close the front
cover securely and then close the side cover. If the
covers are closed in the wrong order, the covers may
be damaged.
Toner cartridge life
Tofindouttheapproximatequantityoftonerremaining,followtheprocedure
below.
Press and hold the light ( ) key for more than 5
1
2
seconds until all the alarm indicators (
and ) blink and "– –" appears in the copy quantity
display.
,
,
,
,
Press and hold the copy ratio display ( ) key for more
than 5 seconds.
●
The approximate quantity of toner remaining will be indicated as a
percent in the copy quantity display. If "LO" is displayed, the toner is
down to less than 10%.
Press the light ( ) key.
3
●
All the alarm indicators will go out.
43
Download from Www.Somanuals.com. All Manuals Search And Download.
MISFEED REMOVAL
The copier will stop when a misfeed occurs. The misfeed
) indicator will blink, and blinking red misfeed location
indicators will indicate the approximate misfeed location.
If paper is accidentally torn during removal, be sure to
remove all pieces.
Be careful not to damage the photoconductive drum.
For misfeeds in optional equipment, see their respective
sections of the operation manual.
(
First confirm the misfeed location.
(
P.44)
(
P.45, 48)
(
(
P.49)
P.72)
Misfeed in the RSPF
If an original misfeed occurs in the RSPF, the copier will
stop and the red indicator which indicates an original
misfeed will blink.
A
B
C
Location A
Openthefeedingrollercoverandpulltheoriginalgently
to the left and out from the document feeder tray. Close
the feeding roller cover.
Feeding roller cover
1
2
Location B
If the misfed original cannot be removed in step 1, open
the right side cover and remove the misfed original.
Close the right side cover.
Right side cover
44
Download from Www.Somanuals.com. All Manuals Search And Download.
MISFEED REMOVAL
Location C
If the misfed original cannot be removed in steps 1 and
2, remove the misfed original from the exit area. Open
the document feeder cover and rotate the roller in the
direction indicated by the arrow if needed. If the misfed
original cannot be easily removed from the exit area,
open the front part of the document feeder tray to
removetheoriginal.Pulloutthereversingtraytoremove
the misfed original.
3
4
Roller
Afterremovingthemisfedoriginalfromtheexitarea,be
sure to insert the reversing tray into the exit area until
it locks in place.
Openandclosethedocumentfeedercovertocancelthe
misfeed location indicator.
After misfed originals are removed, a number may
appear in the copy quantity display, indicating the
number of originals that must be returned to the
document feeder tray. Return the originals and press
the START key to resume copying.
Misfeed in the bypass tray
Gently pull the misfed paper out.
1
Lift slightly on the side cover and slide the cover out
until it stops. Close the side cover by pressing the
handle on the cover.
2
●
The misfeed ( ) indicator will go out.
Misfeed in the copier
Open the bypass tray. Lift slightly on the side cover and
slide the cover out until it stops.
1
45
Download from Www.Somanuals.com. All Manuals Search And Download.
MISFEED REMOVAL
Check the misfeed location. Remove the misfed paper
following the instructions for each location in the
illustration below.
2
If paper is misfed here, proceed to
“B. Misfeed in the fusing area”.
If the misfed paper is seen from this
side, proceed to “C. Misfeed in the
transport area”.
If paper is misfed here, proceed to
“A. Misfeed in the paper feed area”.
A. Misfeed in the paper feed area
Push gently on both sides of the front cover to open the
cover.
1
Carefully remove the misfed paper. Turn the roller
rotating knob in the direction of the arrow to assist in
removing it.
2
Roller rotating knob
The fusing unit is hot. Take care in removing paper.
Donottouchthephotoconductivedrum(greenportion)
whenremovingthemisfedpaper.Doingsomaydamage
the drum and cause smudges on copies.
Close the front cover by pushing both sides with your
hands and then close the side cover by pressing the
handle on the cover.
3
●
The misfeed ( ) indicator will go out.
When closing the covers, be sure to close the front
cover securely and then close the side cover. If the
covers are closed in the wrong order, the covers may
be damaged.
B. Misfeed in the fusing area
Push gently on both sides of the front cover to open the
cover.
1
46
Download from Www.Somanuals.com. All Manuals Search And Download.
MISFEED REMOVAL
Turn the roller rotating knob in the direction of the
arrow.
Roller rotating knob
2
3
Carefully remove the misfed paper. Lower the fusing
unit release levers to allow easier removal. Return the
release levers to their operating positions.
Fusing unit release lever
The fusing unit is hot. Take care in removing paper.
●
Do not touch the photoconductive drum (green
portion) when removing the misfed paper. Doing so
may damage the drum and cause smudges on
copies.
●
Be careful about unfixed toner on the misfed paper
not to soil your hands or clothes.
Close the front cover by pushing both sides with your
hands and then close the side cover by pressing the
handle on the cover.
4
●
The misfeed ( ) indicator will go out.
When closing the covers, be sure to close the front
cover securely and then close the side cover. If the
covers are closed in the wrong order, the covers may
be damaged.
C. Misfeed in the transport area
Open the paper guide by pressing down the projection
on either side of the guide and remove the misfed paper.
1
The fusing unit is hot. Take care in removing paper.
If the misfed paper cannot be removed by the previous
step but is visible in the paper output area, remove the
paper by pulling it into the paper output area.
2
47
Download from Www.Somanuals.com. All Manuals Search And Download.
MISFEED REMOVAL
Close the side cover by pressing the handle on the
cover.
3
●
The misfeed ( ) indicator will go out.
Misfeed in the upper paper tray
Before opening the upper paper tray, be sure to open the bypass tray, lift
slightly on the side cover and slide the cover out until it stops, and then
perform steps 1 to 3 described in the “A. Misfeed in the paper feed area”
section.
Gently lift and pull out the upper paper tray and remove
the misfed paper.
1
Close the paper tray.
2
Lift slightly on the side cover and slide the cover out
until it stops. Close the side cover by pressing the
handle on the cover.
3
●
The misfeed ( ) indicator will go out.
48
Download from Www.Somanuals.com. All Manuals Search And Download.
MISFEED REMOVAL
Misfeed in the lower paper tray
Grasp the handle of the lower side cover and gently
open the cover.
1
2
3
4
5
Remove the misfed paper.
●
Be careful not to tear the misfed paper during removal.
If the misfed paper is not seen in step 2, gently lift and
pull out the lower paper tray and remove the misfed
paper.
●
Be careful not to tear the misfed paper during removal.
Close the paper tray.
Close the lower side cover.
●
The misfeed ( ) indicator will go out.
49
Download from Www.Somanuals.com. All Manuals Search And Download.
DEVELOPER REQUIRED
When the
indicator lights up, the developer should be replaced.
DEVELOPER REPLACEMENT SHOULD ONLY BE DONE BY AN
AUTHORIZED SHARP SERVICE TECHNICIAN. Contact your service
center as soon as possible.
MAINTENANCE REQUIRED
When the
indicator lights up, service by an authorized SHARP service
technician is required. Contact your service center as soon as possible.
50
Download from Www.Somanuals.com. All Manuals Search And Download.
USER PROGRAMS
The user programs allow the parameters of certain functions to be set,
changed, or canceled as desired.
List of user programs
This copier has the following user programs.
Program Program name
No.
Description
1
2
3
Auto clear time
Sets the auto clear time. The copier returns to the initial settings
when the auto clear time elapses after the last copy is made.
Preheat mode
Sets the time that elapses before the copier enters the preheat
mode after any operation is made. See page 58.
Auto power shut-off
timer
Sets the time that elapses before the copier enters the auto power
shut-off mode after any operation is made. See page 58.
4
Stream feeding mode
Enables or disables the stream feeding mode. See page 14.
Enables or disables the auto power shut-off mode. See page 58.
5
6
Auto power shut-off setting
Border line for 2 in 1 or
4 in 1
Enables or disables the border line which is printed in 2 in 1 or 4 in 1
copying. See page 37.
7
8
9
Rotation copy
Enables or disables rotation of original images. See page 36.
Enables or disables the auto paper selection. See page 15.
Auto paper select mode
Auto tray switching
Enables or disables the automatic tray switching which occurs when paper
in a tray runs out. (This switching cannot switch to the bypass tray.)
10
Auditing mode
Enables or disables the auditing mode, which controls access to
copier. See page 13.
11
12
Account number entry
Account number change
Account number deletion
Registers accounts for auditing mode.
Changes account numbers for auditing mode.
13
14
Deletes accounts for auditing mode.
Number of copies
per account
Displays the total number of copies made against account numbers.
15
16
Resetting account
Resets all audit accounts or resets any desired individual account.
Sets the amount of the edge erase and center erase areas. See page 39.
Selects a pattern for 2 in 1 copying. See page 37.
Erase width adjustment
17
18
19
Layout in 2 in 1 copy
Layout in 4 in 1 copy
Offset of paper output tray
Selects a pattern for 4 in 1 copying. See page 37.
Enables or disables the offset function of the paper output tray. The offset
function can be specified respectively for the upper and lower areas
separated by an optional job separator tray. See page 27.
20
22
Image rotation in duplex
copying
Enables or disables image rotation (180°) of the front side in one-sided to
two-sided copying or two-sided to one-sided copying. See page 22.
Location of the margin
Selects the location of the expanded margin. See page 41.
51
Download from Www.Somanuals.com. All Manuals Search And Download.
USER PROGRAMS
Setting the user programs
Press and hold the light ( ) key for more than 5
seconds until all the alarm indicators (
,
,
,
,
1
and
) blink and “– –” appears in the copy quantity
display.
Enter a program number using the numeric keys.
●
The selected program number will blink in the copy quantity display.
If a mistake is made in steps 2 to 4, press the CLEAR ( ) key. The
copier will return to step 2.
The program numbers are shown in the table below.
For example, to change the setting of the auto power shut-off timer,
press key 3.
2
●
●
Program name
Program No.
Auto clear time
Preheat mode
1
2
Auto power shut-off timer
Stream feeding mode
Auto power shut-off setting
Border line for 2 in 1 or 4 in 1
Rotation copy
3
4
5
6
7
Auto paper select mode
Auto tray switching
8
9
Auditing mode
10
11
12
13
14
15
16
17
18
19
20
22
Account number entry
Account number change
Account number deletion
Number of copies per account
Resetting account
Erase width adjustment
Layout in 2 in 1 copy
Layout in 4 in 1 copy
Offset of paper output tray
Image rotation in duplex copying
Location of the margin
For operation of these programs after
step 3, see page 54.
Press the START key.
3
●
For programs 1 to 9 and 16 to 22, the entered program number will be
steadily lit on the left side of the copy quantity display and the
currently selected parameter number for the program will blink on the
right side.
●
For programs 10 to 15 (programs for auditing accounts), the display
varies with the program number. See page 54 for setting programs 10
to 15.
52
Download from Www.Somanuals.com. All Manuals Search And Download.
USER PROGRAMS
Select the desired parameter using the numeric keys.
4
●
The entered parameter number will blink on the right side of the copy
quantity display.
●
The parameters are shown in the table below.
For example, to change the setting of the auto power shut-off timer to
60 min., press key 2.
Program name
Auto clear time
Parameters
0
5
OFF
10 sec.
OFF
1
30 sec.
* 2
60 sec.
3
90 sec.
4
120 sec.
Preheat mode
0
1
2
30 sec.
60 min.
ON
2
3
60 sec.
90 min.
* 3 90 sec.
4
5
120 sec.
240 min.
Auto power shut-off timer
Stream feeding mode
Auto power shut-off setting
* 1
30 min.
4
120 min.
* 0 OFF
1
0
OFF
* 1
1
ON
Border line for 2 in 1 or 4 in 1 * 0
OFF
ON
Rotation copy
0
0
OFF
* 1
* 1
* 1
1
ON
Auto paper select mode
Auto tray switching
Erase width adjustment
Layout in 2 in 1 copy
Layout in 4 in 1 copy
Offset of paper output tray
OFF
ON
0
OFF
ON
0
0"
1/4"
* 2
1/2"
3
4
3/4"
4
1"
* 1
* 1
0
Pattern 1
Pattern 1
2
Pattern 2
Pattern 2
2
3
* 1
3
Pattern 3
Pattern 4
Upper OFF, lower OFF
Upper ON, lower OFF
Upper ON, lower ON
Upper OFF, lower ON
2
Image rotation in duplex
copying
* 0 OFF
1
ON
Location of the margin
* 1 Left
2
Top
Factory default settings are indicated with an asterisk (*). For layout in 2 in 1 copy and 4 in 1 copy, see page 37.
If you select “0” (OFF) in a program, the corresponding
function will be disabled.
Press the START key.
5
●
The right-hand number in the copy quantity display will be steadily lit
and the entered value will be stored.
To continue with other user programs, press the
key
and then repeat steps 2 to 5. To exit the user program
mode, press the light ( ) key.
6
●
All the alarm indicators will go out.
53
Download from Www.Somanuals.com. All Manuals Search And Download.
USER PROGRAMS
Settings for auditing accounts
Setting of user programs No. 10 to 15 varies with the program number. For
settings of all programs, first follow steps 1 to 3 in “Setting the user
programs” on page 52 to select a program. (1. Press the light ( ) key for
morethan5seconds. 2. Enteraprogramnumber(10to15)usingthenumeric
keys. 3. Press the START key.) Then follow the appropriate instructions for
the program.
Program No. 10: Auditing mode
If the auditing mode is enabled, copying is limited to operators with an
assigned3-digitaccountnumber.Amaximumof20,3-digitaccountnumbers
can be assigned. Use program No. 11 to register account numbers.
When program No. 10 is entered, the current setting (0: OFF, 1:ON) will
blink on the right side of the copy quantity display.
1. Select the desired setting using the numeric keys.
0: OFF
1: ON
2. Press the START key.
●
The setting will be stored.
3. To continue with other user programs, press the
key
and enter another program number. To exit the user
program mode, press the light ( ) key.
Program No. 11: Account number entry
ProgramNo.11isusedtoregisteraccounts.WhenprogramNo.11isentered,
“
” will blink in the copy quantity display.
●
If the number of accounts has reached the upper limit (20), “11E” will
appear in the copy quantity display. Press the
return to step 2 on page 52.
key. The copier will
1. Enter a 3-digit account number using the numeric keys.
●
Any 3-digit number except “000” can be registered as an account
number.
2. Press the START key.
●
If a number that is already registered or “000” is entered, the number
will blink in the copy quantity display.
3. Repeat steps 1 and 2 for other account numbers.
4. To continue with other user programs, press the
key
and enter another program number. To exit the user
program mode, press the light ( ) key.
54
Download from Www.Somanuals.com. All Manuals Search And Download.
USER PROGRAMS
Program No. 12: Account number change
Program No. 12 is used to change account numbers. When program No. 12
is entered, an account number will appear in the copy quantity display.
●
If no account number has been registered, “12E” will appear in the copy
quantitydisplay.Pressthe
52.
key.Thecopierwillreturntostep2onpage
1. Use the copy ratio display ( ) key to select the account
number to be changed.
●
Use the
key to advance through the account numbers.
2. Press the START key.
●
The account number will be erased and “
” will blink in the copy
quantity display.
3. Enter a new account number using the numeric keys.
4. Press the START key.
●
If a number that is already registered or “000” is entered, the number
will blink in the copy quantity display.
5. Repeat steps 1 to 4 for other account numbers.
6. To continue with other user programs, press the
key
and enter another program number. To exit the user
program mode, press the light ( ) key.
Program No. 13: Account number deletion
Program No. 13 is used to delete accounts. When program No. 13 is entered,
“0” will blink on the right side of the copy quantity display.
●
If no account number has been registered, “13E” will appear in the copy
quantitydisplay. Pressthe
52.
key. Thecopierwillreturntostep2onpage
1. To delete an individual account, press the 0 key.
To delete all accounts, press key 1.
2. Press the START key.
●
If you have pressed the 0 key in step 1, an account number will appear
in the copy quantity display. Proceed to step 3.
●
If you have pressed key 1, all account numbers will be deleted.
Proceed to step 5.
3. Use the copy ratio display ( ) key to select the account
number to be deleted.
●
Use the
key to advance through the account numbers.
4. Press the START key.
●
The specified account will be deleted.
5. To continue with other user programs, enter another
program number. To exit the user program mode, press
the light ( ) key.
55
Download from Www.Somanuals.com. All Manuals Search And Download.
USER PROGRAMS
Program No. 14: Number of copies per account
Program No. 14 is used to display the total number of copies made against
each account number. When program No. 14 is entered, an account number
will appear in the copy quantity display.
●
If no account number has been registered, “14E” will appear in the copy
quantitydisplay.Pressthe
52.
key.Thecopierwillreturntostep2onpage
1. Use the copy ratio display ( ) key to select the account
number.
●
Use the
key to advance through the account numbers.
2. Press and hold down the 0 key.
●
The number of copies made against the specified account number will
be displayed. The two higher digits and the three lower digits will
appear alternately while the 0 key is pressed.
Example: 1,234 copies
●
The upper limit for the number of copies is 49,999. If the number of
copiesmadereaches50,000,thenumberwillberesetto0andcounting
will start again from 0.
3. Repeat steps 1 and 2 for other account numbers.
4. To continue with other user programs, press the
key
and select another program number. To exit the user
program mode, press the light ( ) key.
56
Download from Www.Somanuals.com. All Manuals Search And Download.
USER PROGRAMS
Program No. 15: Resetting account
Program No. 15 is used to reset all accounts or to reset any desired individual
account. When program No. 15 is entered, “0” will blink on the right side of
the copy quantity display.
●
If no account number has been registered, “15E” will appear in the copy
quantitydisplay. Pressthe
52.
key. Thecopierwillreturntostep2onpage
1. To reset an individual account, press the 0 key.
To reset all accounts, press key 1.
2. Press the START key.
●
If you have pressed the 0 key in step 1, an account number will appear
in the copy quantity display. Proceed to step 3.
●
If you have pressed key 1, the number of copies against all account
numbers will be reset. Proceed to step 5.
3. Use the copy ratio display ( ) key to select the account
number to be reset.
●
Use the
key to advance through the account numbers.
4. Press the START key.
●
The number of copies against the specified account number will be
reset.
5. To continue with other user programs, enter another
program number. To exit the user program mode, press
the light ( ) key.
57
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER SAVE MODES
The copier has two power save modes to reduce overall power consumption
thereby reducing the cost of operation. In addition, these modes conserve
natural resources and help reduce environmental pollution. The two power
save modes are preheat mode and auto power shut-off mode.
●
User programs
The preheat activation time and the auto power shut-off time have been
presetatthefactoryto90sec. forpreheatmodeand30min. forautopower
shut-off mode. These times can be changed using user programs. It is
suggested that you set appropriate times according to the actual usage of
the copier. See page 51.
Preheat mode
When the copier enters the preheat mode, the POWER SAVE indicator will
light up and other indicators will remain on or off as before. In this condition,
the fuser in the copier is maintained at a lower heat level, thereby saving
power. The preheat level is, however, high enough to allow the copier to
come to a ready condition or begin copying within 10 seconds after any key
input or copier operation such as paper tray operation is performed.
Auto power shut-off mode
If the auto power shut-off mode is enabled, the copier will automatically turn
off the power once a programmed length of time has elapsed without any
copieroperationafterthelastcopyofarunismadeorthepowerisfirstturned
on. The power switch will automatically be turned to the “OFF” position.
To turn the power back on, simply turn the power switch to the “ON”
position.
●
If an optional printer expansion kit or facsimile expansion kit is installed
and this mode is enabled, the POWER SAVE indicator will light up and
all other indicators will go out. The auto power shut-off mode saves more
power but requires a longer time to warm up before copying can begin.
As an ENERGY STAR® Partner, SHARP has
determined that this product meets the ENERGY
STAR® guidelines for energy efficiency.
The Environmental Choice Program guidelines are
appliedtotheproductsonlyinCanada. Theproducts
that meet the Environmental Choice Program
guidelines carry the logo shown to the left. The
products without the logo may not meet the
Environmental Choice Program guidelines.
58
Download from Www.Somanuals.com. All Manuals Search And Download.
POWER SAVE MODES
Setting the power save modes
The time that elapses before the copier enters a power save mode after any
operationismadecanbesetmanually. ThistimeissetwithuserprogramNo.
2 for the preheat mode and user program No. 3 for the auto power shut-off
mode. For these settings, see page 52.
●
The copier will enter the preheat mode first and then the auto power shut-
offmodeafterapresettimehaselapsedwhennocopieroperationhasbeen
made.
●
IfconflictingsettingsaremadewithuserprogramsNo.3andNo.5,thelast
program set will have priority.
Copying from the preheat mode
Make desired copier selections and press the START
key using the normal copying procedure.
●
When any key input is made or any other copier operation is made, the
POWER SAVE indicator will start to blink.
When the START key is pressed, the START key indicator will go out
●
andcopyingwillstartwithin10seconds.ThePOWERSAVEindicator
will go out when copying starts.
Copying from the auto power shut-off mode
●
Only available when an optional printer expansion kit or facsimile
expansion kit is installed.
Press the START key.
1
●
The copier will exit the auto power shut-off mode and the POWER
SAVE indicator will start to blink.
Make desired copier selections and press the START
key using the normal copying procedure.
2
●
It will take approximately 35 seconds for the copier to start copying.
However, you can make desired settings and press the START key
during warm-up. Copying will start after warm-up is finished.
59
Download from Www.Somanuals.com. All Manuals Search And Download.
USER MAINTENANCE
Proper care is essential for clean, sharp copies. Please take a few minutes to
regularly clean your copier.
Original table and document feeder cover
Stains or dirt on the original table or document feeder
cover will also be copied. Wipe the original table and
document feeder cover with a soft, clean cloth.
●
If necessary, dampen the cloth with water. Do not use thinner,
benzene, or similar volatile cleaning agents.
●
Wipe the scanning window on the original table.
Bypass tray paper feed roller
If misfeeds occur frequently when feeding postcards,
envelopes, thick paper, etc. through the bypass tray,
wipe the blue paper feed roller at the feed slot of the
bypass tray with a soft, clean cloth dampened with
alcohol or water.
Paper feed roller
60
Download from Www.Somanuals.com. All Manuals Search And Download.
USER MAINTENANCE
Transfer charger cleaning
Ifcopiesstartbecomingstreakyorblotchy, thetransferchargermaybedirty.
Clean the charger using the following procedure.
Turn the power switch off.
1
2
Open the bypass tray. Lift slightly on the side cover and
slide the cover out until it stops.
Gently lift and pull out the upper paper tray and take the
charger cleaner out by holding the tab.
Charger cleaner
3
Set the charger cleaner onto the transfer charger and
gently slide the cleaner in the direction indicated by the
arrow two or three times.
4
Slidethechargercleanerfromoneendtotheotherend
along the groove of the transfer charger. If the cleaner
is stopped on the way, smudges on copies may occur.
●
If the white sheet metal is smudged with toner, wipe it with a soft,
clean cloth.
Return the charger cleaner to its original position.
Close the upper paper tray. Close the side cover by
pressing the handle on the cover.
5
6
Turn the power switch on.
61
Download from Www.Somanuals.com. All Manuals Search And Download.
COPIER TROUBLE?
Problem
Solution
●
●
Copier plugged in?
Power switch ON?
Plug the copier into a grounded outlet.
See page 8.
Copier does not
operate.
Turn the power switch ON.
See page 14.
Copies are too dark or
too light.
●
●
Copy density properly adjusted?
See pages 15 and 30.
Blank copies
Is the original placed face up in the
RSPF or face down on the original
table?
Place the original face up in the RSPF or face
down on the original table.
●
●
Paper too heavy?
Paper damp?
Use copy paper within the specified range.
See page 65.
Copies smear if rubbed.
Replace with dry copy paper.
Be sure to store copy paper in a dry location.
See page 66.
●
●
Is transfer charger clean?
Non-standard paper used?
Clean the transfer charger.
See page 61.
Striped copies
Use standard paper. If using special paper,
feed the paper through the bypass tray.
See pages 25 and 65.
Paper misfeeds frequently.
●
●
Paper properly installed?
Pieces of paper inside copier?
Paper curled or damp?
Make sure the paper is properly installed. See
pages 10 and 25.
Remove all pieces of misfed paper.
See page 44.
●
●
Storepaperflatinthewrapperinadrylocation.
See page 66.
Open the document feeder cover completely
and then place the original on the original
table. Close the document feeder cover.
Has the document feeder cover
been completely opened when the
original is placed on the original
table?
Original size not selected
automatically.
●
If the original includes any large black solid
areas, the original size may not be detected.
Use the ORIGINAL SIZE ENTER key to
select the paper size which is set.
Doestheoriginalincludeanylarge
black solid areas?
62
Download from Www.Somanuals.com. All Manuals Search And Download.
COPIER TROUBLE?
Problem
Solution
Clean regularly. See page 60.
●
Original table or document
feeder cover dirty?
●
●
Original smudged or blotchy?
Use a clean original.
Copies are smudged
or dirty.
Developer is reguired. Contact your SHARP
service center as soon as possible. See page
50.
Is the
Is the
indicator on?
indicator on?
●
Maintenanceisrequired.ContactyourSHARP
service center as soon as possible. See page
50.
●
●
Is the COPY indicator off?
Use the COPY/FAX key to select the COPY
mode. See Note below.
Paper size for a paper
tray cannot be set.
Is copying, printing or facsimile
printing being performed?
Set the paper size after copying, printing or
facsimile printing is complete.
●
●
Is the POWER SAVE indicator
blinking?
Wait until warm-up is complete.
Warm-up time is approximately 35 seconds.
The copier is in the auto power shut-off mode.
Press the START key. See page 58, POWER
SAVE MODES.
Is only the POWER SAVE
indicator on? (when an optional
printer or facsimile expansion kit
is installed)
Power is on but copying
is not possible.
Use the COPY/FAX key to select the COPY
mode. See Note below.
●
●
Is the COPY indicator off?
The copier is in the auditing mode.
Enter your account number using the numeric
keys. See page 13.
Is
steadily lit in the copy
quantity display?
Paper is needed. See page 10, LOADING
COPY PAPER.
●
Is the
indicator on?
COPY/FAX key
The COPY/FAX key is used to switch
between the FAX and COPY modes.
For details, see the MULTI ACCESS
manual.
63
Download from Www.Somanuals.com. All Manuals Search And Download.
COPIER TROUBLE?
Problem
Solution
Remove the paper on or under the job separator
●
Istheoutputtrayfull( )indicator
on and any misfeed location (
)
tray so that it can move to the proper position,
and then open and close the side cover.
indicator blinking while the
misfeed ( ) indicator is not
blinking?
●
●
Is two-sided printing being
performed?
Wait until the printing job will finish.
Is
blinking in the copy
The toner cartridge is not installed. Install the
toner cartridge. If "CH" is blinking even if the
cartridge is installed properly, contact your
SHARP service center immediately.
quantity display?
Power is on but copying
is not possible.
●
Is
steadily lit in the copy
Side cover(s) is open.
quantity display?
Close the front and side covers securely.
●
●
Is the
Is the
indicator blinking?
The toner cartridge must be replaced. See page
42, TONER CARTRIDGE REPLACEMENT.
indicator blinking?
Amisfeedhasoccurred.Seepage44,MISFEED
REMOVAL.
●
Is the same power outlet used for
the lighting fixture and the copier?
Connect the copier to a power outlet which is
not used for other electric appliances.
Lighting fixture flickers.
Be sure to use only genuine SHARP parts and sup-
plies.
Please contact your SHARP service center immediately if a problem persists
after checking the above.
Self-diagnostic function
An automatic self-diagnostic function is built into the copier. Should the
copier malfunction, the self-diagnostic function will locate the problem and
stop the copier to prevent damage. An alphanumeric code will appear in the
copy quantity display.
Example
Shouldthecopiercompletelystopandaletterandanumberappearalternately,
contact your SHARP service center immediately.
64
Download from Www.Somanuals.com. All Manuals Search And Download.
SUPPLIES
Types and sizes of copy paper
Size
Weight
Capacity
Special paper
(21 lb. bond paper)
Paper trays
Bypass tray
5-1/2" x 8-1/2"*
to 11" x 17"
15 lbs. to 21 lbs.
250 sheets
Ordinary paper:
5-1/2" x 8-1/2"
to 11" x 17"
15 lbs. to 34 lbs.** 100 sheets
(Ordinary paper)
Transparency film, labels,
envelopes***
Envelopes:
Commercial 10
(4-1/8" x 9-1/2")
International DL
(110 x 220 mm)
International C5
(162 x 229 mm)
* 5-1/2" x 8-1/2" copy paper can be used in the uppermost paper tray but
cannotbeusedinothertrays(includingtraysinoptionalpaperfeedunits).
**For paper weighing from 28 to 34 lbs., 8-1/2" x 11" is the maximum size
that can be fed through the bypass tray.
*** Do not use envelopes that have metal clasps, plastic snappers, string
closures, windows, linings, self-adhesivepatchesorsyntheticmaterials.
These will cause physical damage to the copier.
●
For best results, use only paper recommended by SHARP.
●
Special papers except envelopes must be fed one sheet at a time through
the bypass tray. Up to 10 envelopes can be set at one time.
65
Download from Www.Somanuals.com. All Manuals Search And Download.
SUPPLIES
Genuine supplies statement
For best copying results, be sure to use only
SHARP Genuine Supplies which are
designed, engineered and tested to maximize
the life and performance of SHARP copiers.
Look for the Genuine Supplies label on the
toner package.
Standard supplies for this copier that are to be replaced by the user are copy
paper and toner cartridge.
GENUINE SUPPLIES
Proper storage
1. Store the supplies in a location that is:
●
●
●
clean and dry,
at a stable temperature,
not exposed to direct sunlight.
2. Store paper in the wrapper and lying flat.
●
Paper stored out of the wrapper or in packages standing on end may
curl or get damp, resulting in paper misfeeds.
66
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Type
Digital laser copier, desktop
Copy system
Originals
Dry, electrostatic transfer
Sheets, bound documents
Max. 11" x 17"
Original sizes
Copy sizes
Max. 11" x 17"
Min. 5-1/2" x 8-1/2"
Image loss: Max. 5/32" (4 mm) (leading and trailing edges)
Max. 5/32" (4 mm) (along other edges in total)
Copying speed
(one-sided copying at
100% copy ratio)
20 copies/min. (8-1/2" x 11")
15 copies/min. (8-1/2" x 11"R)
12 copies/min. (8-1/2" x 14")
10 copies/min. (11" x 17")
Continuous copy
First-copy time
Warm-up time
Copy ratio
Max. 99 copies; subtractive counter
7.2 s (except in a power save mode)
Approx. 35 s
Variable: 50% to 200%, in 1% increments (total 151 steps)
Fixed preset: 50%, 64%, 77%, 95 %, 100%, 121%, 129%,
141%, 200%
Exposure system
Original table:
Moving optical source, slit exposure
(stationary platen) with automatic exposure
function
RSPF:
Moving original
Copy paper feed
Two paper trays with automatic feed (250 sheets each), one
bypass tray with automatic feed (100 sheets)
Fusing system
Developer system
Light source
Heat rollers
Magnetic brush development
Xenon lamp
Resolution
Scan: 400 dpi
Output: 600 dpi
Gradation
Scan: 256 levels
Output: 2 levels
Power supply
AC 120V, 60 Hz, 11 amperes
Max. 1.3 kW
Power consumption
Overall dimensions
(with bypass tray folded)
23-15/64" (W) x 20-29/32" (D)
(590 mm (W) x 531 mm (D))
67
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Weight
Approx. 94.9 lbs. (43 kg)
Toner cartridge included
Copier dimensions
Operating conditions
Optional equipment
23-15/64" (W) x 20-29/32" (D) x 25-19/32" (H)
(590 mm (W) x 531 mm (D) x 650 mm (H))
Temperature: 59°F to 86°F (15°C to 30°C)
Humidity: 20% to 85%
250-sheet paper feed unit (AR-DE5)
2x250-sheet paper feed unit (AR-DE6)
Facsimile expansion kit (AR-FX2)
Printer expansion kit (AR-PB8)
PS2 expansion kit (AR-PS1)
LCD panel kit (AR-PA1)
Job separator tray kit (AR-TR2)
Print server card (AR-NC3D)
REVERSING SINGLE PASS FEEDER
Acceptable
originals
Weight: 15 to 24 lbs.
Size:
5-1/2" x 8-1/2"* to 11" x 17"
Capacity: Up to 30 sheets provided the total aggregate
thickness does not exceed 5/32"
* 5-1/2" x 8-1/2" size original cannot be used in the duplex
mode.
Detectable original
sizes
5-1/2" x 8-1/2", 8-1/2" x 11", 8-1/2" x 11"R, 8-1/2" x 14",
11" x 17"
First-copy time may differ depending on operating conditions, such as power-supply voltage and
room temperature.
As a part of our policy of continuous improvement, SHARP reserves the right
to make design and specification changes for product improvement without
prior notice. The performance specification figures indicated are nominal
values of production units. There may be some deviations from these values
in individual units.
68
Download from Www.Somanuals.com. All Manuals Search And Download.
OPTIONAL
EQUIPMENT
CONTENTS
Page
●
SYSTEM CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . 70
250-SHEET PAPER FEED UNIT (AR-DE5)/
●
2x250-SHEET PAPER FEED UNIT (AR-DE6) . . . . . . . . . . . . . . 71
69
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM CONFIGURATION
A number of options are available for the copier which allow you to
configure a copier system to meet your particular needs. The options include
the following.
Facsimile expansion kit (AR-FX2)*
Printer expansion kit (AR-PB8)*
PS2 expansion kit (AR-PS1)*
LCD panel kit (AR-PA1)*
Job separator tray kit (AR-TR2)*
Print server card (AR-NC3D)*
* These options are not used for the copier
operation.
250-sheet paper feed unit
(AR-DE5)
2x250-sheet paper feed unit
(AR-DE6)
70
Download from Www.Somanuals.com. All Manuals Search And Download.
(AR-DE5)
2x250-SHEET PAPER FEED UNIT
250-SHEET PAPER FEED UNIT
(AR-DE6)
Thesepaperfeedunitsasoptionsprovidetheconvenienceofincreasedpaper
capacity for the copier and a greater choice of paper sizes readily available
for copying.
The AR-DE5 contains one 250-sheet paper tray and the AR-DE6 contains
two 250-sheet paper trays.
PART NAMES
250-sheet paper feed unit
2 x 250-sheet paper feed unit
AR-DE6
AR-DE5
Side cover
Side cover
Tray
Trays
Loading copy paper
The method of loading paper for the paper trays of these paper feed
units is the same as for the paper trays in the copier. See page 10.
The method of changing the copy paper size is also the same for the paper
trays in the copier. See page 11.
71
Download from Www.Somanuals.com. All Manuals Search And Download.
250-SHEET PAPER FEED UNIT (AR-DE5)/2x250-SHEET PAPER FEED UNIT (AR-DE6)
Misfeed removal
The copier will stop when a misfeed occurs. The misfeed ( ) indicator and
the red indicator which indicates the paper feed unit will blink.
Open the side cover of the paper feed unit and remove
the misfed paper.
1
●
Be sure to perform this step before pulling out the paper trays. If not,
the paper may be torn as the trays are opened.
Gently lift and pull out the paper tray which was in use.
Remove any misfed paper.
2
Close the paper tray and the side cover.
3
●
Confirm that the misfeed ( ) indicator has gone out.
72
Download from Www.Somanuals.com. All Manuals Search And Download.
250-SHEET PAPER FEED UNIT (AR-DE5)/2x250-SHEET PAPER FEED UNIT (AR-DE6)
Specifications
AR-DE5
Copy paper size
Paper weight
8-1/2" x 11" to 11" x 17"
15 lbs. to 21 lbs.
Paper capacity
Onepapertraywithcapacityfor250sheetsof21lb. bond
paper
Weight
Approx. 10.4 lbs. (4.7 kg)
Dimensions
23-15/64" (W) x 18-35/64" (D) x 3-15/32" (H)
(590 mm (W) x 471 mm (D) x 88 mm (H))
Power supply
Drawn from the copier
AR-DE6
Copy paper size
Paper weight
8-1/2" x 11" to 11" x 17"
15 lbs. to 21 lbs.
Paper capacity
Two paper trays with capacity for 250 sheets of 21 lb.
bond paper each
Weight
Approx. 20.1 lbs. (9.1 kg)
Dimensions
23-15/64" (W) x 18-35/64" (D) x 6-27/32" (H)
(590 mm (W) x 471 mm (D) x 173.5 mm (H))
Power supply
Drawn from the copier
Asapartofourpolicyofcontinuousimprovement,SHARPreserves
the right to make design and specification changes for product
improvement without prior notice. The performance specification
figures indicated are nominal values of production units. There may
be some deviations from these values in individual units.
73
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
2
I
250-sheet paper feed unit . . . . . . . . . . . . . . . . . . . . . . . 71
2 in 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
2x250-sheet paper feed unit . . . . . . . . . . . . . . . . . . . . . 71
Image rotation in duplex copying. . . . . . . . . . . . . . . . . 22
Initial settings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
Interrupt . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 29
4
L
4 in 1 . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37
Light key. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15, 43, 52
Loading copy paper . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
A
Auto clear . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 51
Automatic exposure adjustment . . . . . . . . . . . . . . . . . . 30
Auto paper select . . . . . . . . . . . . . . . . . . . . . . . . . . . 7, 51
Auto power shut-off mode . . . . . . . . . . . . . . . . . . . . . . 58
M
Maintenance
– user maintenance . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
– maintenance required indicator . . . . . . . . . . . . . . . . . 50
Manual exposure . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Manual feeding . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Margin shift . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 41
Misfeed removal
B
B/W reverse . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
Bypass tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
– bypass tray. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
– in the copier. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 45
– paper tray. . . . . . . . . . . . . . . . . . . . . . . . . . . . 48, 49, 72
– RSPF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 44
C
Cautions on handling . . . . . . . . . . . . . . . . . . . . . . . . . . . 9
Copier trouble? . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Copying
– normal . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
– from the original table . . . . . . . . . . . . . . . . . . . . . . . . 19
– reduction/enlargement. . . . . . . . . . . . . . . . . . . . . . . . 23
– through bypass tray . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Copy paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10, 65
Copy quantity . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
Copy ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
N
Names
– operation panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
– part . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
O
Offset . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27, 51
Operation panel . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Options . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 69
Original table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
D
Dark key . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Developer replacement required indicator . . . . . . . . . . 50
Document feeder cover . . . . . . . . . . . . . . . . . . . . . . . . . 4
Document feeder tray . . . . . . . . . . . . . . . . . . . . . . . . . . . 5
Dual page copy . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 35
P
Paper
– loading. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
– special . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
– specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Paper output tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Paper size . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Paper tray . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10
Part names . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4
Photo mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15
Power on . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Power save modes . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
Power switch . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
Preheat mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 58
E
Enlargement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Erase . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
Exposure adjustment . . . . . . . . . . . . . . . . . . . . . . . . . . 15
F
Features. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3
Fixed copy ratio . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
Fusing unit release lever . . . . . . . . . . . . . . . . . . . . . . . . 47
G
Group . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
74
Download from Www.Somanuals.com. All Manuals Search And Download.
INDEX
R
Reduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 23
Replacement
– toner cartridge . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Reversing single pass feeder (RSPF) . . . . . . . . . . . . . . 14
Rotation copying . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
RSPF . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
S
Sort . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 27
Special paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 25
Specifications
– copier. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 67
– paper . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 65
Status indicators . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 42
Storage of supply . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 66
Stream feeding mode . . . . . . . . . . . . . . . . . . . . . . . . . . 14
T
Toner cartridge life . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
Toner cartridge replacement. . . . . . . . . . . . . . . . . . . . . 42
Toner save mode . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
Total output count . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
Troubleshooting . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 62
Two-sided copying . . . . . . . . . . . . . . . . . . . . . . . . . 16, 21
U
User maintenance
– bypass tray paper feed roller . . . . . . . . . . . . . . . . . . . 60
– document feeder cover . . . . . . . . . . . . . . . . . . . . . . . 60
– original table . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 60
– transfer charger . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 61
User programs . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 51
X
XY zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
Z
Zoom . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 24
75
Download from Www.Somanuals.com. All Manuals Search And Download.
Date Issued: Nov. 1, 2000
MSDS No. F-00991
MATERIAL SAFETY DATA SHEET
Section 1. Product Identification
Product:
AR-201NT/T/FT/ST (Black Toner)
Section 2. Supplier’s Name and Address
Sharp Corporation
22-22 Nagaike-cho, Abeno-ku, Osaka, Japan
Local suppliers are listed below. Please contact the nearest supplier for additional information.
(Country)
U.S.A.
(Name and Telephone Number)
Sharp Electronics Corporation
Telephone number for information: 1-800-237-4277
Emergency telephone number:
1-800-255-3924
Canada
Sharp Electronics of Canada Ltd.
Telephone number for information: 905-890-2100
Emergency telephone number:
1-800-255-3924
United Kingdom
Sharp Electronics (U.K.) Ltd.
Telephone number for information: 01923-474013
Section 3. Ingredients
Ingredients
Styrene-Acrylate copolymer
Carbon black
Iron oxide
Metal Complex dye
CAS No.
29497-14-1
1333-86-4
1309-38-2
109125-51-1
109125-50-0
Proportion OSHA PEL
ACGIHTLV Other Limits
> 88 %
< 6.0%
< 4.5%
< 1.5%
Not listed
3.5mg/m3
Not listed
0.5mg/m3
Not listed
3.5mg/m3
Not listed
0.5mg/m3
None
None
None
None
{
84179-66-8
Section 4. Hazardous Identification (Emergency Overview)
Toner is a fine, black powder possessing no immediate hazard.There are no anticipated carcinogenic effects from
exposure based on animal tests performed using toner.When used as intended according to instructions, studies
do not indicate any symptoms of fibrosis will occur.
Section 5. Health Hazard Data
Route(s) of Entry:
Inhalation?
Skin?
Ingestion?
Yes
No
Possible but very unusual.
Health Hazards: Acute oral toxicity ------- LDL0 of this toner is over 2,000mg/kg.
Mutagenicity ------------- The result of Ames test is negative.
Carcinogenicity: In 1996 the IARC reevaluated carbon black as a Group 2B carcinogen (possible human
carcinogen). This classification is given to chemicals for which there is inadequate human
evidence, but sufficient animal evidence on which to base an opinion of carcinogenicity. The
classification is based upon the development of lung tumors in rats receiving chronic inhalation
exposures to free carbon black at levels that induce particle overload of the lung. Studies
performed in animal models other than rats did not show any association between carbon
black and lung tumors. Moreover, a two-year cancer bioassay using a typical toner preparation
containing carbon black demonstrated no association between toner exposure and tumor
development in rats.
Chronic Effect: In a study in rats of chronic inhalation exposure to a typical toner, a mild to moderate degree of
lung fibrosis was observed in 92% of the rats in the high concentration (16mg/m3) exposure
group, and a minimal to mild degree of fibrosis was noted in 22% of the animals in the middle
(4mg/m3) exposure group, but no pulmonary change was reported in the lowest (1mg/m3)
exposure group, the most relevant level to potential human exposures.
Signs and Symptoms of Exposure: Minimal irritation to respiratory tract may occur as with exposure to any
non-toxic dust.
Medical Conditions Generally Aggravated by Exposure: None
Emergency and First Aid Procedures:
Inhalation; Remove to fresh air. If effects occur, consult medical personnel.
Eye;
In case of contact, immediately flush eyes with water for 15 minutes.
76
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 6. Physical Chemical Characteristics
Boiling / Melting Point: Not applicable
Specific Gravity:
1.1
Vapor Pressure:
Vapor Density:
Evaporation Rate:
Appearance:
Odor:
Not applicable
Not applicable
Not applicable
Fine powder
Odorless
Solubility inWater: Negligible
PH:
Not applicable
Viscosity:
Color:
Not applicable
Black
Section 7. Fire and Explosion Data
Flash Point (Method Used):
IgnitionTemperature:
Not applicable
>350°C
Flammable Limits:
(LEL); Not applicable
(UEL); Not applicable
Extinguishing Media:
Special Fire Fighting Procedure:
CO2, dry chemical, foam or water
None
Unusual Fire and Explosion Hazard: This material has no unusual fire or explosion hazards.
Sensitivity to Mechanical Impact:
Sensitivity to Static Charge:
None
None
Section 8. Reactivity Data
Stability:
Stable
Incompatibility (Material to Avoid):
Hazardous Decomposition:
Hazardous Polymerization:
None
CO and NOx
Will not occur.
Section 9. Precautions for Safe Handling and Use
Personal Protection Information (Respiratory, Eye Protection and Protective Glove):
Use of a dust mask is recommended when handling a large quantity of toner or during long term
exposure, as with any non-toxic dust.
Engineering Control /Ventilation:
Work / Hygienic Practice:
Not required.
Inhalation should be minimized as with any non-toxic dust.
Steps to be taken in case of Spill or Leak: Sweep up or clean up with vacuum cleaner.
Waste Disposal Method:
Waste material may be dumped or incinerated under conditions
which meet all federal, state and local environmental regulations.
Section 10. Regulatory Information
NFPA Rating (U.S.A.):
WHMIS Legislation (Canada):
Transport Information:
UN No.:
Health = 1
Flammability = 1
This product is not a controlled product.
This product is not a hazardous material.
None allocated.
Reactivity = 0
Section 11. Other Information
References: IARC (1996) IARC Monographs on the Evaluation of the Carcinogenic Risk of Chemicals to Humans,
Vol. 65, Printing Process and Printing inks, Carbon Black and Some Nitro Compounds, Lyon, pp-
149-261
H.Muhle, B.Bellmann, O.Creutzenberg, C.Dasenbrock, H.Ernst, R.Kilpper, J. C.MacKenzie,
P.
Morrow, U. Mohr, S. Takenaka, and R. Mermelstein (1991) Pulmonary Response to Toner upon
Chronic Inhalation Exposure in Rats. Fundamental and Applied Toxicology 17, pp. 280-299
77
Download from Www.Somanuals.com. All Manuals Search And Download.
Date Issued: Nov. 1, 2000
MSDS No. F-30991
MATERIAL SAFETY DATA SHEET
Section 1. Product Identification
Product
AR-201ND/DV/SD (Black Developer)
Section 2. Supplier’s Name and Address
Sharp Corporation
22-22 Nagaike-cho, Abeno-ku, Osaka, Japan
Local suppliers are listed below. Please contact the nearest supplier for additional information.
(Country)
U.S.A.
(Name and Telephone Number)
Sharp Electronics Corporation
Telephone number for information: 1-800-237-4277
Emergency telephone number:
1-800-255-3924
Canada
Sharp Electronics of Canada Ltd.
Telephone number for information: 905-890-2100
Emergency telephone number:
1-800-255-3924
United Kingdom
Sharp Electronics (U.K.) Ltd.
Telephone number for information: 01923-474013
Section 3. Ingredients
Ingredients
CAS No.
Proportion OSHA PEL
ACGIHTLV Other Limits
Iron powder
Styrene-Acrylate copolymer
Carbon black
7439-89-6
29497-14-1
1333-86-4
> 92.5%
< 7.0%
< 0.5%
Not listed
Not listed
3.5mg/m3
Not listed
Not listed
3.5mg/m3
None
None
None
Section 4. Hazardous Identification (Emergency Overview)
Developer is a black powder containing small amounts of toner, and possessing no immediate hazard.
There are no anticipated carcinogenic effects from exposure based on animal tests performed using toner.
Section 5. Health Hazard Data
Route(s) of Entry:
Inhalation?
Skin?
Ingestion?
No
No
Possible but very unusual.
Health Hazards: Acute oral toxicity ------------LDL0 of this toner which is included in this developer is over
2,000mg/kg.
Mutagenicity ------------------The toner, which is included in this developer, has been tested on
Ames test.The result is negative.
Carcinogenicity: In 1996 the IARC reevaluated carbon black as a Group 2B carcinogen (possible human
carcinogen). This classification is given to chemicals for which there is inadequate human
evidence, but sufficient animal evidence on which to base an opinion of carcinogenicity. The
classification is based upon the development of lung tumors in rats receiving chronic inhalation
exposures to free carbon black at levels that induce particle overload of the lung. Studies
performed in animal models other than rats did not show any association between carbon
black and lung tumors.
While there have been no studies to date using developer, a two-year cancer bioassay using a
typical toner preparation containing carbon black (a small amount of toner is included in the
developer mixture) demonstrated no association between toner exposure and tumor
development in rats.
Signs and Symptoms of Exposure: Minimal irritation to respiratory tract may occur as with exposure to any
non-toxic dust.
Medical Conditions Generally Aggravated by Exposure:
Emergency and First Aid Procedures:
None
Inhalation; Remove to fresh air. If effects occur, consult medical personnel.
Eye;
In case of contact, immediately flush eyes with water for 15 minutes.
78
Download from Www.Somanuals.com. All Manuals Search And Download.
Section 6. Physical Chemical Characteristics
Boiling / Melting Point: Not applicable
Specific Gravity:
about 7.3
Vapor Pressure:
Vapor Density:
Evaporation Rate:
Appearance:
Odor:
Not applicable
Not applicable
Not applicable
Fine powder
Odorless
Solubility inWater: Negligible
PH:
Not applicable
Viscosity:
Color:
Not applicable
Black
Section 7. Fire and Explosion Data
Flash Point (Method Used):
IgnitionTemperature:
Not applicable
>350°C
Flammable Limits:
(LEL); Not applicable
(UEL); Not applicable
Extinguishing Media:
Special Fire Fighting Procedure:
CO2, dry chemical, foam or water
None
Unusual Fire and Explosion Hazard: This material has no unusual fire or explosion hazards.
Sensitivity to Mechanical Impact:
Sensitivity to Static Charge:
None
None
Section 8. Reactivity Data
Stability:
Stable
Incompatibility (Material to Avoid):
Hazardous Decomposition:
Hazardous Polymerization:
None
CO and NOx
Will not occur.
Section 9. Precautions for Safe Handling and Use
Personal Protection Information (Respiratory, Eye Protection and Protective Glove):
None required under normal use.
Engineering Control /Ventilation:
Work / Hygienic Practice:
Not required.
Not required.
Steps to be taken in case of Spill or Leak: Sweep up or clean up with vacuum cleaner.
Waste Disposal Method:
Waste material may be dumped or incinerated under conditions
which meet all federal, state and local environmental regulations.
Section 10. Regulatory Information
NFPA Rating (U.S.A.):
WHMIS Legislation (Canada):
Transport Information:
UN No.:
Health = 1
Flammability = 1
This product is not a controlled product.
This product is not a hazardous material.
None allocated.
Reactivity = 0
Section 11. Other Information
References: IARC (1996) IARC Monographs on the Evaluation of the Carcinogenic Risk of Chemicals to Humans,
Vol. 65, Printing Process and Printing inks, Carbon Black and Some Nitro Compounds, Lyon, pp-
149-261
H.Muhle, B.Bellmann, O.Creutzenberg, C.Dasenbrock, H.Ernst, R.Kilpper, J.C.MacKenzie, P.
Morrow, U. Mohr, S. Takenaka, and R. Mermelstein (1991) Pulmonary Response to Toner upon
Chronic Inhalation Exposure in Rats. Fundamental and Applied Toxicology 17, pp. 280-299
79
Download from Www.Somanuals.com. All Manuals Search And Download.
MEMO
Download from Www.Somanuals.com. All Manuals Search And Download.
For users in the USA
WARNING:
FCC Regulations state that any unauthorized changes or modifications to
this equipment not expressly approved by the manufacturer could void the
user's authority to operate this equipment.
Note:
This equipment has been tested and found to comply with the limits for a
Class A digital device, pursuant to Part 15 of the FCC Rules.These limits are
designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment.This equipment gen-
erates, uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the operation manual, may cause harmful interfer-
ence to radio communications. Operation of this equipment in a residential area
is likely to cause harmful interference in which case the user will be required
to correct the interference at his own expense.
NOTICE for users in the USA
BE SURE TO ASK YOUR AUTHORIZED SHARP DEALER ABOUT THE WAR-
RANTY THAT YOUR SELLING DEALER EXTENDS TO YOU. In order to assure
you, the end-user, of warranty protection, Sharp extends a limited warranty to
each of its authorized dealers and, in turn, requires each of its authorized dealers
to extend its own warranty to you on terms that are no less favorable than those
given to the dealer by Sharp. You should be aware, however, that Sharp does not
itself extend any warranties, either express or implied, directly to you, the end-
user, and no one is authorized to make any representations or warranties on behalf
of Sharp. Specifically, SHARP DOES NOT EXTEND TO YOU, THE END-USER,
ANY EXPRESS WARRANTY OR ANY IMPLIED WARRANTY OF
MERCHANTABILITY, FITNESS FOR USE OR FITNESS FOR ANY PARTICULAR
PURPOSE IN CONNECTION WITH THE HARDWARE, SOFTWARE OR
FIRMWARE EMBODIED IN, OR USED IN CONJUNCTION WITH THIS PROD-
UCT. Sharp is not responsible for any damages or loss, either direct, incidental or
consequential, which you, the end-user, may experience as a result of your pur-
chase or use of the hardware, software or firmware embodied in or used in con-
junction with this Product. Your sole remedy, in the event that you encounter any
difficulties with this Product, is against the authorized dealer from which you pur-
chased the Product.
AR-207 Digital Laser Copier
In the event that this authorized dealer does not honor its warranty commitments,
please contact the General Manager, Business Products Group, Sharp Electronics
Corporation, Sharp Plaza, Mahwah, NJ 07430-2135, so that Sharp can try to help
assure complete satisfaction of all the warranty rights to which you are entitled
from the authorized dealer.
Download from Www.Somanuals.com. All Manuals Search And Download.
AR-207
SHARP ELECTRONICS CORPORATION
Sharp Plaza, Mahwah, New Jersey 07430-2135.
SHARP ELECTRONICS OF CANADA LTD.
335 Britannia Road East, Mississauga, Ontario, L4Z 1W9
SHARP CORPORATION
PRINTED IN CHINA
2000L
KS➀
TINSE0447QSZZ
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Sony Car Stereo System D E525 User Manual
Sony CRT Television VPL EX130 User Manual
Sony Home Theater System DAV LF10 User Manual
Sony VCR SLV SE810G User Manual
Stovax Indoor Fireplace 8627 BS User Manual
Sunbeam Bread Maker Bread Dough Maker User Manual
Sunbeam Oven 3224 User Manual
Sunbeam Slow Cooker SCRI500 I User Manual
Sunfire Indoor Furnishings OLE 2SF User Manual
System Sensor Stud Sensor PDRP 1001 User Manual