Shark Electric Steamer SC630WC User Manual

OWNER’S GUIDE  
SC630WC  
U.S.:  
EURO-PRO Operating LLC  
Boston, MA 02459  
Canada: EURO-PRO Operating LLC  
4400 Bois Franc  
Ville St. Laurent, Québec H4S 1A7  
1-877-304-7670  
COPYRIGHT© EURO-PRO OPERATING LLC 2010  
PRINTED IN CHINA  
REV. 100119  
Illustrations may differ with actual product.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SC630WC_IB_En_100119.indd 1-2  
1/26/10 12:13 PM  
Quick Start  
Your Portable Steam Pocket® is designed to clean surfaces that will withstand high  
heat and moisture. Do not use on unsealed wood surfaces (especially wooden antique  
furniture), unglazed ceramic tile, painted surfaces or surfaces that have been treated  
with wax, oils, varnishes, or shellac. The sheen may be removed by the heat, steam,  
and friction of the cleaning tools. Lacquer and polyurethane coatings provide a hard  
durable protective finish that withstands moisture but it is always recommended  
to test an isolated area of the surface to be cleaned before proceeding. We also  
recommend you check the use and care instructions from the surface manufacturer.  
(Note for reference: This connection  
method is the same design used with  
most over the counter prescription  
bottles). The design of this  
connection is to prevent the hose  
from twisting and kinking during use.  
9
11  
When cleaning finished wood surfaces, use broad, continuous cleaning strokes. To  
prevent surface damage, avoid focusing steam or alowing the cleaning tools to sit in  
one spot for any amount of time.  
4
When assembling your Portable Steam Pocket®, there may be a little water in the  
water tank. This is because we test all our portable steam pocket cleaning systems  
100% before you buy them, so you get a quality Shark Steam product.  
DETAIL CLEANING TOOL  
ASSEMBLY  
11 Press fit the scrubbing detail  
brush onto the detail cleaning  
tool handle.  
2
3
12  
6
13  
ASSEMBLY  
HOSE & CLEANING TOOL  
ATTACHMENT USE  
WEDGE CLEANING TOOL ASSEMBLY  
Slide the wedge shaped cleaning  
pocket over the wedge cleaning tool  
frame until it is completely on.  
1
Safely remove contents of the  
Portable Steam Pocket® Cleaning  
System and lay them out on a flat  
surface to see that you have all  
the components to complete the  
assembly (Refer to page 2).  
7
4
Attach the hose connector. Aligning  
the arrow located on the hose  
connector with the un-lock symbol  
located on the nozzle connector.  
Press in and turn clockwise to secure  
into place. The arrow on the hose  
connector will align with the lock  
symbol.  
GARMENT STEAMER  
ASSEMBLY  
12 Press fit the garment steamer  
onto the bottle nozzle.  
8
9
Close the cinch by pulling on the  
elastic band and sliding the locking  
bean to tighten.  
FILL  
2
Turn the water tank cap counter-  
clockwise and remove to fill, using the  
filling flask provided. Be careful not  
to overfill. Replace the cap by turning  
clockwise. The water tank does not  
have to be completely full for the  
steam bottle to generate steam.  
Steam will stop when the water tank  
is empty. You can refill at any time.  
CYLINDER CLEANING TOOL  
ASSEMBLY  
Squeeze “chopsticks” together and  
slide the cylinder shaped cleaning  
pocket over the cylinder cleaning tool  
frame until it is completely on.  
13 Stretch the garment steamer  
bonnet over the garment  
steamer diffuser. Attach  
the garment brush onto the  
garment steamer diffuser by  
aligning the bottom of the  
diffuser with the back of the  
garment brush attachment.  
Gently push the top of the  
garment brush up into place  
until the attachment snaps into  
place.  
5
6
Select the desired cleaning tool for  
use. Follow the cleaning tool sub  
assembly Instructions for the selected  
tool.  
Attach the cleaning tool by inserting  
the hose stem into the handle of  
the cleaning tool. Press in and turn  
clockwise at the same time to  
secure and press in and turn counter  
clockwise to release. Check for  
proper connection by turning the  
handle counter-clockwise a few turns.  
The handle should remain connected.  
10 Close the cinch by pulling on the  
elastic band and sliding the locking  
bean to tighten.  
DIRECT SPRAY STEAM BOTTLE USE  
Attach the steam bottle nozzle.  
Aligning the arrow located on  
the steam bottle nozzle with the  
un-lock symbol located on the  
nozzle connector. Press in and turn  
clockwise to secure into place. The  
arrow on the nozzle will align with the  
lock symbol.  
3
7
8
TOLL FREE: 1-877-304-7670  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SC630WC_IB_En_100119.indd 5-6  
1/26/10 12:13 PM  
Contents  
GETTING STARTED.................................................................2  
USING YOUR PORTABLE STEAM POCKET® .................4  
CARE OF YOUR PORTABLE STEAM POCKET® ...........9  
SUGGESTED USES ................................................................10  
TROUBLESHOOTING GUIDE..............................................12  
REPLACEMENT PARTS........................................................ 16  
WARRANTY AND REGISTRATION...................................17  
Thank you for  
purchasing  
the Shark®  
Portable  
Steam Pocket®  
Cleaning  
System.  
TECHNICAL SPECIFICATIONS  
Voltage: 120V., 60Hz.  
Power: 1550 Watts  
Water Capacity: 450 ml (15 fl. oz.)  
TOLL FREE: 1-877-304-7670  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SC630WC_IB_En_100119.indd 7-1  
1/26/10 12:13 PM  
English  
l
m
Getting Started  
Your Portable Steam Pocket® is  
We also recommend you check the use  
and care instructions from the surface  
manufacturer.  
designed to clean surfaces that will  
withstand high heat and moisture. Do  
not use on unsealed wood surfaces  
(especially wooden antique furniture),  
unglazed ceramic tile, painted surfaces  
or surfaces that have been treated with  
wax, oils, varnishes, or shellac. The  
sheen may be removed by the heat,  
steam, and friction of the cleaning  
tools. Lacquer and polyurethane  
coatings provide a hard durable  
3
Only use water. To extend the life  
of your Portable Steam Pocket®, we  
recommend using distilled water.  
If you live in an area with hard tap  
water, we recommend using distilled  
water.  
When cleaning finished wood surfaces,  
use broad, continuous cleaning strokes.  
To prevent surface damage, avoid  
focusing steam or alowing the cleaning  
tools to sit in one spot for any amount  
of time.  
n
p
o
4 Do not add cleaning solutions,  
scented perfumes, oils, or any other  
chemicals to the water used in  
this appliance as this may damage  
the unit or make it unsafe for use.  
Use of any substances other than  
manufacturer’s recommended  
accessories will automatically void  
your warranty.  
When assembling your Portable Steam  
Pocket®, there may be a little water in  
the water tank. This is because we test  
all our portable steam pocket cleaning  
systems 100% before you buy them, so  
you get a quality Shark Steam product.  
q
protective finish that withstands  
moisture but it is always recommended  
to test an isolated area of the surface to  
be cleaned before proceeding.  
FIRSTTHINGSFIRST, YOUNEED TO KNOW  
WHAT’SINTHEBOXYOUJUSTOPENED:  
ASSEMBLY & USE INSTRUCTIONS  
FILLING AND REFILLING THE WATER  
TANK  
1
Safely remove contents of the  
Portable Steam Pocket® Cleaning  
System and lay them out on a flat  
surface to see that you have all  
the components to complete the  
assembly.  
a
1
Never fill the steam bottle while  
plugged into an electrical outlet.  
a
Steam Bottle  
b Extension Hose  
Wedge Cleaning Tool  
d Cylinder Cleaning Tool  
2
3
Disconnect the power cord before  
filling the water tank.  
b
c
Turn the water tank cap counter  
clockwise and remove to fill, using  
the filling flask provided. Be careful  
not to overfill. Replace the cap by  
turning clockwise.  
2
READ ALL INSTRUCTIONS BEFORE  
USING YOUR PORTABLE STEAM  
POCKET®.  
e
f
Detail Cleaning Handle  
2 Detail Brush Accessories  
c
d
g Garment Steamer Diffuser  
IMPORTANT: Always make sure the  
steam bottle is UNPLUGGED from  
the electrical outlet when not in use.  
Never fill the water reservoir when  
the unit is plugged in.  
h
i
Garment Brush Attachment  
Garment Steamer Bonnet  
Filling Flask  
j
3
k
l
Direct Steam Nozzle  
2 All-Purpose Wedge Cleaning Pockets  
m 2 All-Purpose Cylinder Cleaning Pockets  
Steam Duster Cylinder Cleaning Pocket  
e
f
j
g
h
i
n
o Scrubbing Wedge Pocket  
p Squeegee Wedge Pocket  
q Nozzle Cleaner  
k
r
Tote Bag (not shown)  
2
TOLL FREE: 1-877-304-7670  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
SC630WC_IB_En_100119.indd 2-3  
1/26/10 12:13 PM  
English  
Using Your Portable Steam Pocket®  
DIRECT SPRAY STEAM BOTTLE USE  
1
to secure and press in and turn  
counter clockwise to release. Check  
for proper connection by turning  
the handle counter-clockwise a few  
turns. The handle should remain  
connected. (Note for reference:  
This connection method is the  
same design used with most over  
the counter prescription bottles).  
The design of this connection is to  
prevent the hose from twisting and  
kinking during use.  
Cleaning Tip: The wedge tip and  
squared edges reach into tight areas  
often missed or difficult to reach with  
traditional cleaning methods. The  
Wedge sides concave to wrap around  
sink and faucet fixtures, door knobs, and  
other small curved surfaces leaving them  
clean all around. Multiple sides provide  
more surface cleaning area and allow  
one to clean with one side and finish  
with the other for a “NOW YOU KNOW  
THAT’S CLEAN” performance. Surface  
examples for use are countertops,  
Cleaning Tip: Direct steam spray for  
cleaning hard to reach nooks & crannies  
and stubborn sticky messes where  
focused steam power may be needed.  
Direct steam spray can loosen and  
dislodge compact dirt often found  
in corners and tight places where  
traditional methods and cleaning tools  
tend to push dirt into, making it difficult  
to reach and clean. Spray direct steam  
and wipe clean with a cleaning cloth.  
3
tabletops, cabinets, walls, floor spot  
cleaning, bathroom fixtures and more.  
CAUTION: Direct steam spray  
temperature is extremely hot  
closest to the nozzle and can  
damage surfaces if held directly  
focusing in one spot too long. Be  
5
sure to constantly move and adjust  
the steam spray to avoid causing  
damage.  
4
6
1
Attach the hose connector. Aligning  
the arrow located on the hose  
connector with the un-lock symbol  
located on the nozzle connector.  
Press in and turn clockwise to secure  
into place. The arrow on the hose  
connector will align with the lock  
symbol.  
1
WEDGE CLEANING TOOL ASSEMBLY  
5
Slide the wedge shaped cleaning  
pocket over the wedge cleaning tool  
frame until it is completely on.  
6 Secure the cleaning pocket onto the  
frame. Close the cinch by pulling  
on the elastic band and sliding the  
locking bean to tighten.  
2
3
To remove the hose, press in and  
turn the hose connector counter-  
clockwise to unlock and remove.  
1
Attach the Steam Bottle Nozzle.  
Aligning the arrow located on  
the Steam Bottle Nozzle with the  
Un-Lock symbol located on the  
Nozzle Connector. Press in and turn  
clockwise to secure into place. The  
arrow on the nozzle will align with the  
Lock symbol.  
Select the desired cleaning tool  
for use. Follow the cleaning tool  
sub assembly instructions for the  
selected tool.  
Cleaning Tip: The wedge cleaning  
pocket was designed for cleaning a  
variety of surfaces and is exceptional  
on those that are large and flat, both  
horizontal and vertical. Broad cleaning  
sides and super absorbent microfiber  
fabrics loosen, lift, and lock in dirt and  
grime while sanitizing at the same time.  
CAUTION: It is recommended that  
you allow the cleaning pockets to  
cool off before removing them from  
the wedge or cylinder tools to avoid  
possible scalding injury.  
4 Attach the cleaning tool by inserting  
the hose stem into the handle of  
the cleaning tool. Press in and  
2
To remove the Steam Bottle Nozzle,  
turn counter-clockwise to unlock and  
remove.  
turn clockwise at the same time  
4
TOLL FREE: 1-877-304-7670  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
SC630WC_IB_En_100119.indd 4-5  
1/26/10 12:13 PM  
English  
Using Your Portable Steam Pocket® - cont’d  
CYLINDER CLEANING  
TOOL ASSEMBLY  
DETAIL SCRUBBING BRUSH  
ATTACHMENT  
GARMENT STEAMER ATTACHMENT  
3
CAUTION: Always determine color  
fastness of any fabric, especially with  
reds or blues. Taking a clean, moist,  
warm towel and gently rubbing a  
small area on the fabric that is out of  
sight and out of the way as possible.  
If color bleeds onto the towel,  
1
Squeeze “chopsticks” together and  
slide the cylinder shaped cleaning  
pocket over the cylinder cleaning  
tool frame until it is completely on.  
1
Press fit the detail scrubbing brush  
onto the detail cleaning handle.  
2
Secure the cleaning pocket onto the  
frame. Close the cinch by pulling  
on the elastic band and sliding the  
locking bean to tighten.  
you may need to have the piece  
professionally cleaned.  
1
Press fit the garment steamer onto  
the bottle nozzle  
Tip: For freshening upholstery and  
removing wrinkles from clothing,  
fabrics, and drapes.  
Cleaning Tip: The scrubbing brush  
attachment is great for hard to reach  
areas and for breaking up heavily soiled  
and dried on messes. Allow plenty of  
time for steam heat and moisture to  
penetrate the surface as it dislodges  
the mess for wiping. It can be especially  
useful in the bathroom and shower  
area loosening scum build-up on tile  
and grout. Select either of the cleaning  
pocket tools to clean, sanitize, and wipe  
up excess moisture and residue.  
1
2
For garment steaming, stretch the  
garment steamer bonnet over the  
garment steamer diffuser  
2
3
For garment brush, attach directly  
onto the garment steamer diffuser by  
aligning the bottom of the diffuser  
with the back of the garment brush  
attachment. Gently push the top  
of the garment brush up into place  
over the bonnet until the attachment  
snaps into place.  
Cleaning Tip: The thin cylinder shape  
provides controlled cleaning and reaches  
into narrow areas, around curved and  
contoured surfaces for steam dusting  
and fine cleaning activities. Specialized  
dusting cleaning pockets provide gentle  
cleaning of surfaces, objects, and  
furniture while reaching into crevices  
and corners. It is a great cleaning tool  
for in and around window sills, door jams  
and frames, exhaust and intake vents,  
banisters, railings, spindles, furniture,  
seating, patio furniture, and more.  
NOTE: The detail scrubbing brush is  
most effective when applying light  
pressure. Let the super heated steam  
and the bristle tips do the work for you.  
The sides of the bristles are not effective  
for scrubbing. If you apply too much  
force, you will bend and deform the  
bristles.  
Note: It is recommended that the  
bonnet be used at all times to asure a  
dry steam and prevent condensation.  
6
TOLL FREE: 1-877-304-7670  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
SC630WC_IB_En_100119.indd 6-7  
1/26/10 12:13 PM  
English  
Using Your Portable Steam Pocket® - cont’d  
Care of Your Portable Steam Pocket®  
CLEANING THE NOZZLES  
1
Your Portable Steam Pocket® should  
not normally require cleaning,  
however, should you notice a  
decrease in the steam output, it may  
be necessary to remove mineral  
deposits built up around the nozzles.  
WARNING: The hose stem becomes  
very hot during operation and can  
cause burns. Do not operate the  
Portable Steam Pocket® without  
the proper cleaning tools attached  
securely as instructed.  
2
3
Unplug the cleaner from the  
electrical outlet  
IMPORTANT: Once plugged in, the  
Blue LED will illuminate, and your  
Portable Steam Pocket® Cleaning  
System will be ready to use within 30  
GENERATING STEAM  
seconds.  
Use the provided nozzle cleaner or a  
small diameter stiff metal wire, such  
as a straightened metal paperclip,  
and carefully insert the end of the  
wire into the nozzle orifice. See  
illustrations below.  
Caution: This appliance must be  
unplugged from electrical outlet and  
allowed to cool down before storage  
or cleaning.  
1
Plug the unit in and wait about 30  
to 45 seconds then press and hold  
the steam trigger to activate the  
pump. You will immediately hear  
steam generating and begin to see  
visible results either from the nozzle  
or the attached cleaning tool. It is  
recommended that you wait at least  
30 seconds before pulling the trigger  
as this will minimize water spitting.  
WARNING: Your portable steam  
pocket® is designed to clean surfaces  
that will withstand high heat and  
moisture. Do not use on unsealed  
wood surfaces (especially wooden  
antique furniture), unglazed ceramic  
tile, or surfaces that have been  
treated with wax, oils, varnishes, or  
shellac. The sheen may be removed  
by the heat, steam, and friction of  
the cleaning tools. Lacquer and  
polyurethane coatings provide a  
hard durable protective finish that  
withstands moisture but it is always  
recommended to test an isolated  
area of the surface to be cleaned  
before proceeding.  
4 Move the wire back and forth several  
times to remove any deposits.  
5
Plug in the appliance to the power  
outlet and test to note steam output.  
2
3
Once you release the steam trigger,  
the pump will stop delivering water to  
the boiler and the steam will reduce  
to a stop when the boiler becomes  
empty.  
STORAGE  
1
Let the appliance cool down before  
cleaning or storing  
For wedge and cylinder cleaning  
pockets, allow the bottle to generate  
enough steam to activate the cleaning  
fabric. Once you see visible steam  
emitting through the fabric, your  
cleaning pocket is ready to use. Some  
messes, particularly those that are  
sticky may require more moisture, so  
allow more steam to generate and  
exhaust from the cleaning pocket  
before cleaning.  
2
3
Empty the water tank after each use  
Store in a cool dry location  
We also recommend you check the  
use and care instructions from the  
surface manufacturer.  
CLEANING THE STEAM BOTTLE  
1
A periodic rinse of your steam  
cleaner will help free it from normal  
water deposits. This is recommended  
every 10-15 fillings to free up any  
scale deposit. Fill the reservoir with  
water and secure the cap. Shake  
vigorously for approximately 10-15  
times and remove the cap to empty  
the reservoir.  
NOTE: Make sure surfaces are free  
of crumbs and debris before using  
the portable steam pocket®. Large  
objects may not be picked up by  
the steam pocket and will only be  
pushed around.  
Cleaning tip: To prevent clogging, it  
is recommended that you periodically  
clean the Direct Steam Nozzle and the  
extension hose stem with the cleaning  
tool provided or a paper clip.  
CAUTION: Steam is hot and can cause  
burns, so please use with caution.  
8
TOLL FREE: 1-877-304-7670  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
SC630WC_IB_En_100119.indd 8-9  
1/26/10 12:13 PM  
English  
Suggested Uses  
KITCHEN CLEANING  
BATHROOM CLEANING  
Clean and sanitize daily messes in your sinks, microwaves, refrigerators, stove  
tops, food prep areas like countertops and cutting boards, and trash cans.  
Your portable steam cleaner can reduce common household bacteria and odors  
from all corners and areas of your bathroom, from toilets, sinks, tubs, showers,  
and floors. Wiping grime out of those impossible to reach spots without harsh  
chemicals or perfumy residue. Clean all surfaces including glass, mirrors and  
ceramic tiles.  
10  
TOLL FREE: 1-877-304-7670  
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SC630WC_IB_En_100119.indd 10-11  
1/26/10 12:13 PM  
English  
Trouble Shooting  
Notes  
POSSIBLE  
REASONS  
PROBLEM  
SOLUTIONS  
Verify that the Blue light is on and  
the product is plugged in correctly  
into a working outlet.  
The Steam Bottle is not  
plugged in.  
There is no  
steam  
There is not enough  
water in the unit.  
Fill the steam bottle tank.  
Mineral build-up may be Using the nozzle cleaner, carefully  
clogging the nozzle.  
clean the nozzle to remove debris.  
There is not  
enough steam  
Water level may be low.  
Fill the steam bottle tank.  
The microfiber fabrics  
may be dirty and need  
to be replaced or  
washed.  
Use the other sides, if clean.  
The cleaning  
pockets are  
streaking or  
leaving dirt  
behind  
Replace with a clean cleaning  
pocket.  
The microfiber fabric  
may be worn.  
Replace as needed.  
The cleaning  
tool handles  
keep falling  
off the hose  
Check the connection, making sure  
you are pressing in and turning at  
the same time.  
The connection may not  
be secure.  
12  
TOLL FREE: 1-877-304-7670  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SC630WC_IB_En_100119.indd 12-13  
1/26/10 12:13 PM  
English  
Notes  
14  
TOLL FREE: 1-877-304-7670  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SC630WC_IB_En_100119.indd 14-15  
1/26/10 12:13 PM  
MODEL SC630WC  
English  
Replacement Parts  
1
ONE (1) YEAR LIMITED WARRANTY  
EURO-PRO Operating LLC warrants this product to be free from defects in material and  
workmanship for a period of one (1) year from the date of the original purchase, when utilized for  
normal household use, subject to the following conditions, exclusions and exceptions.  
2
If your appliance fails to operate properly while in use under normal household conditions  
within the warranty period, return the complete appliance and accessories, freight prepaid. For  
If the appliance is found to be defective in material or workmanship, EURO-PRO Operating LLC  
will repair or replace it free of charge. Proof of purchase date and $ 9.95 to cover the cost of  
return shipping and handling must be included. *  
3
The liability of EURO-PRO Operating LLC is limited solely to the cost of the repair or  
replacement of the unit at our option. This warranty does not cover normal wear of parts and  
does not apply to any unit that has been tampered with or used for commercial purposes. This  
limited warranty does not cover damage caused by misuse, abuse, negligent handling or damage  
due to faulty packaging or mishandling in transit. This warranty does not cover damage or  
defects caused by or resulting from damages from shipping or repairs, service or alterations to  
the product or any of its parts, which have been performed by a repair person not authorized by  
EURO-PRO Operating LLC.  
4
5
This warranty is extended to the original purchaser of the unit and excludes all other legal and/  
or conventional warranties. The responsibility of EURO-PRO Operating LLC if any, is limited to  
the specific obligations expressly assumed by it under the terms of the limited warranty. In no  
event is EURO-PRO Operating LLC liable for incidental or consequential damages of any nature  
whatsoever. Some states/provinces do not permit the exclusion or limitation of incidental or  
consequential damages, so the above may not apply to you.  
This warranty gives you specific legal rights, and you may also have other rights which vary from  
state to state or province to province.  
*Important: Carefully pack item to avoid damage in shipping. Be sure to include proof of  
purchase date and to attach tag to item before packing with your name, complete address and  
phone number with a note giving purchase information, model number and what you believe  
is the problem with item. We recommend you insure the package (as damage in shipping is  
not covered by your warranty). Mark the outside of your package “ATTENTION CUSTOMER  
SERVICE”. We are constantly striving to improve our products, therefore the specifications  
contained herein are subject to change without notice.  
6
ORDERING REPLACEMENT PARTS  
To order additional parts and  
accessories, feel free to contact us at  
OWNERSHIP REGISTRATION CARD FOR  
7
CANADIAN CONSUMERS ONLY  
Please complete and return within ten (10) days of purchase. The registration will enable  
us to contact you in the event a product defect is discovered. By returning this card you  
acknowledge to have read and understood the instructions for use, and warnings set  
forth in the accompanying instructions.  
or call 1-877-304-7670.  
PART  
PART NO.  
PART  
PART NO.  
1 2 Detail Scubbing  
1036SO  
5 Scrubbing Wedge  
P109W  
Cleaning Pocket  
Brushes  
RETURN TO: EURO-PRO Operating LLC, 4400 Bois Franc, St. Laurent, Quebec H4S 1A7  
PURCHASER: ……………………………………………………………………………………………...........................................  
ADDRESS: ……………………………………………………………………………………………….............................................  
6 Squeegee Wedge  
Cleaning Pocket  
P108W  
2 All-Purpose Cylinder  
Cleaning Pocket  
P105W  
P106W  
P107W  
7 Garment Steamer  
Bonnet  
XBON637  
3 All-Purpose Wedge  
Cleaning Pocket  
SC630WC  
4 Steam Duster Cylinder  
DATE OF PURCHASE: ……………………....................... MODEL: ………………............................................  
Cleaning Pocket  
NAME AND ADDRESS OF STORE: …………………………………………………………………................................
16  
TOLL FREE: 1-877-304-7670  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
SC630WC_IB_En_100119.indd 16-17  
1/26/10 12:13 PM  

Sharp Air Conditioner AF R80FX User Manual
Sharp All in One Printer MX M623N User Manual
Sharp Projector PG D2870W User Manual
Singer Sewing Machine 127 1 User Manual
Sony CD Player CDX 848X User Manual
Sony CRT Television 329 User Manual
Spirit Treadmill XT101 User Manual
Stanley Black Decker Automobile Parts CT06 User Manual
StarTechcom Switch SV431H User Manual
Sunbeam Outdoor Shower 6911 6913 User Manual