OWNER’S GUIDE
S3101UKM
Download from Www.Somanuals.com. All Manuals Search And Download.
S3101UKM_11_IB_ENG_120906_1.indd
1
12-09-06 3:26 PM
10. DO NOT pull or carry by power
cord, use power cord as handle,
close a door on the power cord, or
pull the power cord around sharp
edges or corners. Keep power cord
away from heated surfaces.
22. Extreme caution should be exercised
when using this appliance to clean
stairs.
23. Never use steam mop without
microfibre pad attached.
24. Keep your work area well lit.
11. DO NOT unplug by pulling on
power cord. To unplug, grasp the
plug not the power cord. Do not
use extension cords or outlets
with inadequate current carrying
capacity.
25. Store steam mop indoors in a cool,
dry place.
26. To avoid circuit overload, do not
operate another appliance on the
same socket (circuit) as the steam
cleaner.
12. DO NOT put any objects into
openings. Do not use with any
opening blocked.
27. If an extension cord is absolutely
necessary, an extension cord rated
a minimum of 15 ampere, 14 gauge
cord should be used. Cords rated
for less amperage may overheat.
Extension cords over 5 meters in
length should not be used. Care
should be taken to arrange cord so
that it cannot be pulled or tripped
over.
13. DO NOT put hands or feet under
the steam mop. Unit gets very hot.
14. Use ONLY on flat, horizontal
surfaces. Do not use on walls,
counters or windows.
15. DO NOT use on leather, wax
polished furniture or floors,
synthetic fabrics, velvet or other
delicate, steam sensitive materials.
28. DO NOT leave unattended when
the system is connected to a power
supply/electrical outlet.
16. DO NOT add cleaning solutions,
scented perfumes, oils or any other
chemicals to the water used in this
appliance as this may damage the
unit or make it unsafe for use. If
you live in a hard water area, we
recommend using distilled water in
your steam mop.
29. DO NOT store unit with damp/wet
microfibre cleaning pad attached.
Never leave the steam mop in one
spot on any surface for any period of
time with a damp or wet microfibre
cleaning pad attached as this will
damage your floors
17. When in use, NEVER turn the
WARNING: Your steam
mop is designed to clean hard floor
surfaces that will withstand high heat.
Do not use on unsealed wood or
unglazed ceramic floors. On surfaces
that have been treated with wax or
some no wax floors, the sheen may
be removed by the heat and steam
action. It is always recommended to
test an isolated area of the surface to
be cleaned before proceeding. We
also recommend that you check the
use and care instructions from the
floor manufacturer.
appliance over or on its side.
18. NEVER DIRECT STEAM TOWARDS
PEOPLE, ANIMALS OR PLANTS.
19. NEVER LEAVE THE STEAM MOP
IN ONE SPOT ON ANY SURFACE
FOR ANY PERIOD OF TIME WHEN
MICROFIBRE PAD IS ATTACHED.
20. Carefully remove the microfibre
pad immediately after you have
finished using the steam mop.
21. When cleaning the steam mop,
unplug the power cord from the
electrical outlet and clean with a
dry or damp cloth. Do not pour
water or use alcohol, benzene or
paint thinner on the unit.
SAVE THESE
INSTRUCTIONS
HELP LINE: 0844 873 0728
Download from Www.Somanuals.com. All Manuals Search And Download.
S3101UKM_11_IB_ENG_120906_1.indd
3
12-09-06 3:26 PM
Quick Start
2
1
3
ASSEMBLE
FILL
1
Fit together the extension tubes
as shown in the illustration.
See page 2 for more detailed
assembly instructions.
3
Remove the cap to fill the
Water Tank. Using the filling
flask and funnel, fill the tank,
keeping the water under the
“MAX FILL” line. Don’t forget to
replace the cap.
2
Place the microfibre cleaning
cloth underneath the mop head,
with quick fastener strips facing
up. Simply press the pad to the
mop to attach it.
HELP LINE: 0844 873 0728
Download from Www.Somanuals.com. All Manuals Search And Download.
S3101UKM_11_IB_ENG_120906_1.indd
4
12-09-06 3:26 PM
4
PRIME STEAM
5
Plug in the mop. Wait
approximately 30 seconds for
the unit to heat up and the steam
to be ready.
QUICK TIP: Customise
steam output by slow or fast
mopping with a forward and
backward motion.
Push the handle toward the mop
head in a pumping motion. To
prime simply pump the handle
10-15 times to generate the
steam.
HELP LINE: 0844 873 0728
Download from Www.Somanuals.com. All Manuals Search And Download.
S3101UKM_11_IB_ENG_120906_1.indd
5
12-09-06 3:26 PM
This appliance complies with the WEEE-Directive 2002/96/EC on the disposal of electrical and electronic
equipment (WEEE).
This appliance complies with the European directives for electromagnetic compatibility (EMC) 2004/108/EC
and its revisions, as well as Low Voltage Directive (LVD) 2006/95/EC and its revisions.
This marking indicates that this product should not be disposed with other household
wastes throughout the EU. To prevent possible harm to the environment or human health
from uncontrolled waste disposal, recycle it responsibly to promote the sustainable reuse of
material sources. To return your used device, please use the return and collection systems
or contact the retailer where this product was purchased. They can take this product for
environmental safe recycling.
This product has no on/off switch and operates when plugged into the main supply source. Disconnect the
plug from mains after use.
Although the product is not provided with standby mode or off mode, it still fulfills the requirements of
1275/2008/EC - the directive for Eco-Design requirements since according to technical justification, it is
considered as inappropriate to provide standby and off modes when connecting to mains. To reduce energy
consumption be sure to unplug the unit after use.
THIS BOOK COVERS MODEL NUMBER:
S3101UKM 11
TECHNICAL SPECIFICATIONS
Voltage: 220-240V~, 50/60Hz.
Not to be disposed
of with other
household waste.
Power: 1550 Watts
IPX4
Water Capacity: 250 ml
Download from Www.Somanuals.com. All Manuals Search And Download.
S3101UKM_11_IB_ENG_120906_1.indd
6
12-09-06 3:26 PM
Contents
GETTING STARTED
2
6
8
9
Thank you for
purchasing
the Shark
USING YOUR STEAM MOP
CARE OF YOUR STEAM MOP
TROUBLESHOOTING
Steam Mop.
1
Download from Www.Somanuals.com. All Manuals Search And Download.
S3101UKM_11_IB_ENG_120906_1.indd
1
12-09-06 3:27 PM
Getting Started
When assembling your steam mop there
may be a little water in or around the
water tank. This is because we test all
our steam mops 100% before you buy
them, so you get a quality Shark®
Steam Mop.
2
c
b
a
e
d
FIRST THINGS FIRST, YOU NEED TO
KNOW WHAT’S IN THE BOX YOU
JUST OPENED:
YOUR SHARK STEAM MOP IS
EASY TO ASSEMBLE
1
First remove all the parts from the
package. We know you’re excited
about the Shark Steam Mop,
but don’t plug it in until it’s fully
assembled and you’ve read all of the
following instructions.
a
Upper Extension Tube
b Lower Extension Tube (Telescopic)
Steam Mop Base
d 2 Microfibre Pads
Filling Flask
c
2
Slide the upper extension tube (the
tube with the handle) into the lower
extension tube (the short tube). Push
the two extension tubes together in
until you hear it click into place. See
illustration for a visual explanation.
e
HELP LINE: 0844 873 0728
2
Download from Www.Somanuals.com. All Manuals Search And Download.
S3101UKM_11_IB_ENG_120906_1.indd
2
12-09-06 3:27 PM
3
Always attach the microfibre
cleaning pad to the mop head
or you may scratch your floor
surface.
Note: Plug supplied may vary
depending on region.
3
Insert the pieces you assembled in
Step 2 into the pump actuator (the
tube that leads to the tank). Push the
extension tube assembly and pump
actuator together in until you hear it
click into place. Insert cord into cord
clip on the shaft of the steam-mop.
IMPORTANT: Always make sure that
your Steam Mop is unplugged from
the wall before you attach the
microfibre cleaning pad.
3
HELP LINE: 0844 873 0728
Download from Www.Somanuals.com. All Manuals Search And Download.
S3101UKM_11_IB_ENG_120906_1.indd
3
12-09-06 3:27 PM
Getting Started
1
PLACING THE MICROFIBRE PAD
NOTE: Don’t be alarmed if the first
time you use your Steam Mop, you
notice water inside the water tank or
drops of water in the packaging. It’s
normal to see this water. Your Steam
Mop was 100% tested in the factory
to ensure your safety and your floor’s
happiness. If you see water in the
unit, it’s from these tests.
1
Place the microfibre cleaning cloth
underneath the mop head, with
the quick fastener strips facing up.
Simply press the pad on to the
Steam Mop.
IMPORTANT: Make sure you only
add water to the tank. Chemicals or
cleaning solution may damage the
appliance and could be unsafe for
you and your family.
HELP LINE: 0844 873 0728
4
Download from Www.Somanuals.com. All Manuals Search And Download.
S3101UKM_11_IB_ENG_120906_1.indd
4
12-09-06 3:27 PM
The water tank cap has an
arrow to indicate the locked
and unlocked position.
1
Note: Plug supplied may vary
depending on region.
FILLING THE WATER TANK
2
The filling flask and funnel included
with your Steam Mop make filling
the water tank as simple as getting a
glass of water from the sink. Fill the
flask with water and use the funnel to
pour it into the tank. Be sure to keep
the water under the MAX FILL line;
just one flask of water is enough for
your Steam Mop. See illustration for a
visual explanation.
IMPORTANT: Before you fill up the
tank, make sure your Steam Mop is
unplugged from the wall.
1
First, remove the water tank cap by
turning it counter clockwise to the
unlocked position. See illustration
for a visual explanation.
3
Replace the water tank cap by
turning it clockwise to the locked
position.
5
HELP LINE: 0844 873 0728
Download from Www.Somanuals.com. All Manuals Search And Download.
S3101UKM_11_IB_ENG_120906_1.indd
5
12-09-06 3:27 PM
Using Your Steam Mop
Now comes the part you’ve been
waiting for – it’s time to use your steam
mop. When you use your steam mop for
the first time or haven’t used the unit
in awhile, it may take a minute or two
for the water to make its way through
the pump and into the heater to create
steam. Get it started by pumping the
handle a few times. If you’ve waited a
few minutes and you still don’t see any
steam, reference the troubleshooting
section on page 9.
1
IMPORTANT: Your Steam Mop needs
water to make steam! Never use your
Steam Mop without water in the tank.
1
Pull and twist the quick release
cord holder to unwrap the power
cord completely. Plug into a 220-
240 volt electrical outlet. The “On”
light will turn green. Success! If your
light doesn’t turn on reference the
Troubleshooting section on page 9.
Sweep or vacuum your floors
before using your Steam Mop. Your
Steam Mop was designed to get
rid of stuck-on gunk, grime, paw/
footprints and it will do a better job
if yesterday’s cereal crumbs aren’t in
the way.
HELP LINE: 0844 873 0728
6
Download from Www.Somanuals.com. All Manuals Search And Download.
S3101UKM_11_IB_ENG_120906_1.indd
6
12-09-06 3:27 PM
When your Steam Mop stops
steaming, it could be out of
water. Unplug the power cord
from the electrical outlet
and refill the water tank at
anytime.
2
3
2
3
It takes about 30 seconds for the
steam to get going. Now pump the
handle a few times to prime the
pump and activate steam.
IMPORTANT: When your floors are
sparkling clean and you’re finished
with your Steam Mop, unplug it from
the electrical outlet and carefully
remove the microfibre cleaning pad
from the mop head. Always remove
the microfibre cleaning pad from the
mop head when you have finished
using your Steam Mop to avoid
damage to your floors. The steam
will make your microfibre cleaning
pad very hot. You may want to wait
a couple of minutes to let it cool off
before you remove it.
Mop with a forward and backward
motion to customise steam output
automatically.
7
HELP LINE: 0844 873 0728
Download from Www.Somanuals.com. All Manuals Search And Download.
S3101UKM_11_IB_ENG_120906_1.indd
7
12-09-06 3:27 PM
Care of Your Steam Mop
Always remove the microfibre
cleaning pad from the Steam
Mop head when you store
your Steam Mop to avoid
damage to your floors.
40°
KEEPING YOUR MICROFIBRE
CLEANING PAD AS GOOD AS NEW
Your steam activated microfibre
cleaning pad works wonders for you,
so return the favour by giving it the
care it deserves.
KEEPING YOUR STEAM MOP
IN TIP-TOP SHAPE
If you love your Steam Mop, let it
show. Caring for your Steam Mop
and properly storing it means you’ll
get the same super steam action you
expect each time you use it.
1
Wash pad in warm water. Wash
separately from other laundry.
IMPORTANT: Both your Steam Mop
and the water inside it can get very
hot, so let it cool down completely
before you store it.
Only use liquid detergent (no powder
detergent). Don’t use any fabric
softeners.
IMPORTANT: Always store the
Steam Mop in a safe place away from
children and high traffic areas.
Line dry. Do not tumble dry.
2
If there are loose threads on the pad
carefully cut the thread with scissors.
Don’t pull on them or cut at the base.
NOTE: It’s a good idea to use
distilled water in your tank to help
prolong the life of your Steam Mop,
especially if you live in an area with
hard water.
HELP LINE: 0844 873 0728
8
Download from Www.Somanuals.com. All Manuals Search And Download.
S3101UKM_11_IB_ENG_120906_1.indd
8
12-09-06 3:27 PM
Trouble Shooting
PROBLEM
POSSIBLE REASONS & SOLUTIONS
Your steam-mop should be securely plugged into a
220-240V electrical outlet only.
The Steam Mop
will not turn-on.
Check your fuse or breaker.
Steam Mop will not
make steam.
Is there water in the water tank? If not, add water to your
Steam Mop following instructions.
Is your microfibre cleaning pad too wet? Why don’t
you unplug your Steam Mop and change the microfibre
cleaning pad.
Steam Mop leaves
water on the floor.
Don’t leave your steam-mop on the floor with a damp or
wet cleaning pad.
Steam Mop left white
spot on the floor.
Do you have hard water? If you do you might want to
switch to distilled water.
The pad might be dirty, change or wash the pad.
If you washed the pocket with powder detergent then the
pad might have residual detergent left on it. Wash it again
with liquid detergent.
If you are cleaning in a kitchen area where there might be a
build-up of grease then use a degreasing agent such as an
all-purpose cleaner or dish soap and paper towels to clean
the area first.
Floors are cloudy,
streaky or spotty
after steaming.
You might have left the mop in the same spot for
too long.
Do you have hard water? If you do you might want to
switch to distilled water.
This might be leftover from past cleaners used on the floor
surface. Use the steam mop a few more times and see if the
leftover cloudiness is removed.
Steam Mop is hard
to push.
Make sure the cleaning pad is on properly.
9
HELP LINE: 0844 873 0728
Download from Www.Somanuals.com. All Manuals Search And Download.
S3101UKM_11_IB_ENG_120906_1.indd
9
12-09-06 3:27 PM
The After Sales Division
Mexborough
South Yorkshire
England
S64 8AJ
Technical Details:
Model number: S3101UKM 11
Input: 1550 Watts
Main unit voltage: 220-240V~, 50/60 Hz
COPYRIGHT© EURO-PRO OPERATING LLC 2012
PRINTED IN CHINA
Not to be disposed
of with other
household waste.
S3101UKM.E.120906.1
IPX4
Illustrations may differ from actual product.
Download from Www.Somanuals.com. All Manuals Search And Download.
S3101UKM_11_IB_ENG_120906_1.indd 10
12-09-06 3:27 PM
|