3-094-430-31(1)
Multi Channel AV
Receiver
Operating Instructions
STR-DG910
©2007 Sony Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Description and location of parts...................4
1: Installing speakers ...................................14
2: Connecting speakers................................15
3a: Connecting the audio components.........16
3b: Connecting the video components ........19
4: Connecting the antennas..........................30
6: Selecting the speaker system...................33
7: Calibrating the appropriate settings
Listening to FM/AM radio.......................... 65
Using the Radio Data System (RDS).......... 69
Switching between digital and analog audio
(INPUT MODE) .................................... 71
(DIGITAL ASSIGN) ............................. 72
automatically
(AUTO CALIBRATION) ......................33
8: Adjusting the speaker levels and balance
(TEST TONE) ........................................39
(DMPORT) ............................................ 73
Naming inputs............................................. 76
Playback
Selecting a component.................................40
Listening/Watching a component................42
Programming the remote ............................ 78
Amplifier Operations
Navigating through menus ..........................44
Adjusting the level (LEVEL menu) ............49
Settings for the surround sound
(SUR menu)............................................50
Settings for the tuner (TUNER menu).........52
Settings for the audio (AUDIO menu) ........53
Settings for the video (VIDEO menu).........54
Settings for the system (SYSTEM menu) ...55
Additional Information
Glossary ...................................................... 83
Precautions.................................................. 85
Specifications.............................................. 90
Index ........................................................... 93
Enjoying Surround Sound
Enjoying Dolby Digital and DTS surround
sound (AUTO FORMAT DIRECT).......59
Selecting a pre-programmed sound field.....61
Using only the front speakers
(2CH STEREO)......................................64
Listening to the sound without any
adjustment (ANALOG DIRECT)...........64
Resetting sound fields to the initial
settings....................................................65
3GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Description and location of parts
Front panel
1 2 3
4 5
6
7
8
9
q;
qa
?/1
MASTER VOLUME
MULTI CHANNEL DECODING
TONE MODE
TONE
TUNING MODE
TUNING
DISPLAY
INPUT MODE
INPUT SELECTOR
SPEAKERS
(OFF/A/B/A+B)
AUTO CAL MIC
SUR BACK
DECODING
MEMORY/
ENTER
DIMMER
SLEEP
2CH
A.F.D.
MOVIE
MUSIC
AUTO CAL
DIRECT
VIDEO
3
IN/PORTABLE AV IN
PHONES
VIDEO
L
AUDIO
R
ws wa
w;
ql qk qj qh
qg
qf
qd qs
.
Name
Function
Function
A ?/1
(on/standby)
Press to turn the receiver on
or off (page 32, 42, 43, 65).
F Display
The current status of the
selected component or a list
of selectable items appears
here (page 6).
B SPEAKERS
Press to select the speaker
system (page 33).
(OFF/A/B/A+B)
C TONE MODE
TONE +/–
G MULTI
Lights up when multi
channel audio signals are
decoded (page 43).
Adjusts the tonal quality
(bass/treble level) of the
front speakers.
CHANNEL
DECODING lamp
Press TONE MODE
repeatedly to select bass or
treble level, then turn
TONE +/– to adjust the
level (page 45).
H Remote sensor Receives signals from
remote commander.
I DISPLAY
Press to select information
displayed on the display
(page 70, 76).
D TUNING MODE Press to select the tuning
J INPUT MODE
Press to select the input
mode when the same
components are connected
to both digital and analog
jacks (page 71).
mode (page 66, 68).
E TUNING +/–
Turn to scan a station (page
66, 68).
4GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Name
Function
K MASTER
Turn to adjust the volume
level of all speakers at the
same time (page 39, 41, 42,
43).
VOLUME
L DIRECT
Press to listen to high
quality analog sound (page
64).
M AUTO CAL
Press to activate the Auto
Calibration function (page
35).
N INPUT
Turn to select the input
source to playback (page
40).
SELECTOR
O 2CH
A.F.D.
Press to select a sound field
(page 59, 61, 64).
MOVIE
MUSIC
P SUR BACK
Press to select the surround
back decoding mode (page
51).
DECODING
Q SLEEP
Press to activate the Sleep
Timer function and the
duration which the receiver
turns off automatically
(page 77).
R DIMMER
Press to adjust the
brightness of the display
(page 58).
S MEMORY/
Press to store a station or
enter the selection when
selecting the settings (page
32, 67).
ENTER
T VIDEO 3 IN/
PORTABLE AV
IN jacks
Connects to a camcorder or
video game (page 27, 41).
U PHONES jack
Connects to headphones
(page 87).
V AUTO CAL MIC Connects to the supplied
optimizer microphone for
the Auto Calibration
function (page 34).
jack
5GB
Download from Www.Somanuals.com. All Manuals Search And Download.
About the indicators on the display
1
2
3
4
5
6
7
8
9
q;
SP A
SP B
;
D EX
;
PL IIx
;
PL
OPT
DTS -ES 96/24
NEO:6
MEMORY
D.RANGE
RDS ST
MONO
LFE
SW
L
HDMI COAX
C
R
SL
S
SR
SBL SB SBR
qh
qg
qf
qd
qs
qa
Name
Function
Name
Function
A SW
Lights up when sub woofer is
set to “YES” (page 47) and the
audio signal is output from the
SUB WOOFER jacks.
E ; PL II (x) Lights up when the Pro Logic II
Movie/Music/Game decoder is
activated.
“; PL IIx” lights up when the
Pro Logic IIx Movie/Music/
Game decoder is activated.
However, these indicators do
not light up if both the center
and surround speakers are set to
“NO” (page 47) and you select a
sound field using the A.F.D.
button.
B LFE
Lights up when the disc being
played back contains an LFE
(Low Frequency Effect)
channel and the LFE channel
signal is actually being
reproduced.
C SP A/SP B
D ; D (EX)
Lights up according to the
speaker system used (page 33).
However, these indicators do
not light up if the speaker output
is turned off or if headphones
are connected.
Note
Dolby Pro Logic IIx decoding
does not function for signals
with a sampling frequency of
more than 48 kHz.
F ; PL
Lights up when the receiver
applies Pro Logic processing to
2 channel signals in order to
output the center and surround
channel signals.
Lights up when the receiver is
decoding Dolby Digital signals.
“; D EX” lights up when the
receiver is decoding Dolby
Digital Surround EX signals.
Note
When playing a Dolby Digital
format disc, be sure that you
have made digital connections
and that INPUT MODE is not
set to “ANALOG” (page 71).
However, these indicators do
not light up if both the center
and surround speakers are set to
“NO” (page 47) and you select a
sound field using the A.F.D.
button.
G OPT
Lights up when INPUT MODE
is set to “AUTO IN” and the
source signal is a digital signal
being input through the
OPTICAL jack, or when
INPUT MODE is set to “OPT
IN” (page 71).
6GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Name
Function
Name
Function
H DTS (-ES)/
Lights up when the receiver is
decoding DTS signals.
“DTS-ES” lights up when the
receiver is decoding DTS-ES
signals.
“DTS 96/24” lights up when the
receiver is decoding DTS 96
kHz/24 bit signals.
P Playback
channel
The letters (L, C, R, etc.)
indicate the channels being
played back. The boxes around
the letters vary to show how the
receiver downmixes the source
sound (based on the speaker
settings).
Front Left
Front Right
Center (monaural)
Surround Left
(96/24)
indicators
L
Note
R
C
When playing a DTS format
disc, be sure that you have made
digital connections and that
INPUT MODE is not set to
“ANALOG” (page 71).
SL
SR
S
Surround Right
Surround (monaural or the
surround components obtained
by Pro Logic processing)
Surround Back Left
Surround Back Right
Surround Back (the surround
back components obtained by
6.1 channel decoding)
Example:
Recording format (Front/
Surround): 3/2.1
Output channel: When surround
speakers are set to “NO” (page
47)
I MEMORY
Lights up when a memory
function, such as Preset
Memory (page 67), etc., is
activated.
SBL
SBR
SB
J Tuner
Lights up when using the
receiver to tune in radio stations
(page 65), etc.
indicators
Note
“RDS” lights up for models of
area code CEL, CEK only.
K Preset
station
Lights up when using the
receiver to tune in preset radio
stations. For details on
presetting radio stations, see
page 67.
Sound Field: A.F.D. AUTO
indicators
SW
L
C
R
SL
SR
L D.RANGE
M NEO:6
N COAX
Lights up when dynamic range
compression is activated (page
45).
Lights up when DTS Neo:6
Cinema/Music decoder is
activated (page 60).
Lights up when INPUT MODE
is set to “AUTO IN” and the
source signal is a digital signal
being input through the
COAXIAL jack, or when
INPUT MODE is set to “COAX
IN” (page 71).
O HDMI
Lights up when the receiver
recognizes a component
connected via a HDMI IN jack
(page 20).
7GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Rear panel
1
2
3
DIGITAL
L
L
(ASSIGNABLE)
AC OUTLET
SAT
IN
SAT IN
DVD IN
VIDEO 2/BD IN
HDMI
OUT
Y
VIDEO 2/
BD IN
ANTENNA
P
B/CB
R/CR
R
R
VIDEO
IN
1
FRONT
A
FRONT
B
AM
OPTICAL
SPEAKERS
P
SA-CD/
CD/CD-R
IN
VIDEO IN
VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN
VIDEO OUT
MONITOR
SAT IN
DVD IN VIDEO
1
IN MONITOR OUT
L
L
COMPONENT VIDEO
DVD
IN
COAXIAL
L
L
L
L
L
R
R
R
R
R
R
R
CENTER
SURROUND
IN
OUT
IN
IN
AUDIO IN
AUDIO IN AUDIO OUT AUDIO IN
AUDIO OUT AUDIO IN
AUDIO OUT
SUB WOOFER
SPEAKERS
DMPORT
AUX
SA–CD/CD/CD–R
TV
SAT
DVD
VIDEO 2/BD
VIDEO
1
6
5
4
A DIGITAL INPUT/OUTPUT section
B ANTENNA section
OPTICAL IN ConnectstoaDVD
FM
ANTENNA
jack
Connects to the
jacks
player, etc. The
COAXIAL jack
provides a better
quality of loud
sound (page 24,
26).
FM wire antenna
supplied with this
receiver (page 30).
COAXIAL IN
jacks
AM
ANTENNA
terminals
Connects to the
AM loop antenna
supplied with this
receiver (page 30).
HDMI IN/
OUT jacks*
ConnectstoaDVD
player, satellite
tuner, or a Blu-ray
disc player. The
image and the
C COMPONENT VIDEO INPUT/
OUTPUT section
sound are output to
a TV or a projector
(page 20).
COMPONENT Connectstoa DVD
Green
(Y)
VIDEO
INPUT/
OUTPUT
jacks*
player, TV,
satellite tuner, etc.
Youcanenjoyhigh
quality image
Blue
(PB/CB
)
DMPORT
jack
Connects to a
DIGITAL MEDIA
PORT adapter
(page 74).
Red
(PR/CR
(page 22–26).
)
8GB
Download from Www.Somanuals.com. All Manuals Search And Download.
D SPEAKERS section
Remote commander
Connects to
speakers (page 15).
You can use the supplied remote to operate the
receiver and to control the Sony audio/video
components that the remote is assigned to
operate.
Connects to sub
woofers (page 15).
You can also program the remote to control
non-Sony audio/video components. For
details, see “Programming the remote” (page
78).
E VIDEO/AUDIO INPUT/OUTPUT
section
AUDIO IN/
OUT jacks
Connects to the
White (L)
Red (R)
video and audio
jacks of a VCR,
DVD player, etc.
(page 22 – 27).
RM-AAP017
wk
wj
1
2
?/1
AV ?/1
TV RM SET UP
VIDEO IN/
OUT jacks*
SYSTEM STANDBY
VIDEO 1 VIDEO 2 VIDEO 3 DVD
Yellow
3
4
SAT
AUX
2CH
TV
SA-CD/CD TUNER
RECEIVER
DMPORT
A.F.D.
F AUDIO INPUT/OUTPUT section
MOVIE
MUSIC
wh
wg
wf
AUDIO IN/
OUT jacks
Connects to a
Super Audio CD
player, CD
recorder, etc. (page
17, 18, 22).
5
6
SLEEP FM MODE D.TUNING AUTO CAL
White (L)
Red (R)
1
4
7
2
5
3
6
9
7
8
* You can watch the selected input image when you
connect the HDMI OUT or MONITOR OUT jack
to a TV (page 22).
- --
/
CLEAR
ENTER
0/10
wd
ws
8
9
>10
GUIDE
MEMORY
DISPLAY
V
B
B
wa
w;
v
q;
qa
OPTIONS
TOOLS
RETURN/
MENU
EXIT
ql
REPLAY ADVANCE
.
<
>
<
+
TUNING –
TUNING
qs
m
M
H
X
DISC SKIP
x
qk
TV VOL
TV CH
MASTER VOL PRESET
qj
qh
MUTING
qd
qf
DVD
TOP MENU MENU
F1
F2
qg
TV INPUT WIDE
continued
Download from Www.Somanuals.com. All Manuals Search And Download.
9GB
Name
Function
Name
Function
A AV ?/1
Press to turn on or off the
audio/video components that
the remote is programmed to
operate.
To turn the TV on or off, press
TV (wj) and then press AV
?/1.
D RECEIVER
Press to activate the receiver
operation (page 44).
(on/standby)
E D.TUNING
Press to enter direct tuning
mode.
F AUTO CAL
Press to activate the Auto
Calibration function.
If you press ?/1 (B) at the
same time, it will turn off the
receiver and other components
(SYSTEM STANDBY).
Note
The function of the AV ?/1
switch changes automatically
each time you press the input
buttons (C).
G Numeric
buttons
Press to
– preset/tune to preset
stations.
(number 5a))
– select track numbers of the
CD player, VCD player, LD
player, DVD player, MD
deck, DAT deck, or tape
deck. Press 0/10 to select
track number 10.
– select channel numbers of
the VCR, satellite tuner,
Blu-ray disc recorder, PSX,
DVD/VHS COMBO, or
DVD/HDD COMBO.
Press TV (wj) and then press
the numeric buttons to select
the TV channels.
B ?/1
(on/standby)
Press to turn the receiver on or
off.
To turn off all components,
the same time (SYSTEM
STANDBY).
C Input buttons Press one of the buttons to
select the component you want
to use. When you press any of
the input buttons, the receiver
turns on. The buttons are
H ENTER
Press to enter the value after
selecting a channel, disc or
track using the numeric
buttons of the VCR, CD
player, VCD player, LD
player, MD deck, DAT deck,
tape deck, satellite tuner, Blu-
ray disc recorder, or PSX.
To enter the value of Sony
TV, press TV (wj) and then
press ENTER.
factory assigned to control
Sony components as follows.
You can program the remote to
control non-Sony components
following the steps in
“Programming the remote” on
page 78.
Button
Assigned Sony
component
MEMORY
Press to store a station during
tuner operation.
VIDEO 1
VIDEO 2
VIDEO 3
DVD
VCR (VTR mode 3)
VCR (VTR mode 2)
VCR (VTR mode 1)
DVD player
I DISPLAY
Press to select information
displayed on the TV screen of
the VCR, VCD player, LD
player, DVD player, CD
player, MD deck, Blu-ray disc
recorder, PSX, satellite tuner,
DVD/VHS COMBO, or
DVD/HDD COMBO.
SAT
Satellite tuner
TV
TV
SA-CD/CD Super Audio CD/
CD player
To select information of Sony
TV, press TV (wj) and then
press DISPLAY.
TUNER
AUX
Built-in tuner
Not assigned
DMPORT DIGITAL MEDIA
PORT adapter
10GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Name
Function
Name
Function
J OPTIONS
Press to display and select
items from the option menus
for DVD player or
Xb)
Press to pause playback or
recording of the VCR, CD
player, VCD player, LD
player, DVD player, MD
deck, DAT deck, tape deck,
Blu-ray disc recorder, PSX,
DVD/VHS COMBO, or
DVD/HDDCOMBO. (Also
starts recording with
TOOLS
DVD/VHS COMBO.
To display the options of Sony
TV, press TV (wj) and then
press OPTIONS TOOLS.
K MENU
Press to display the menus of
the receiver, VCR, DVD
player, satellite tuner, Blu-ray
disc recorder, PSX, DVD/
VHS COMBO, or DVD/HDD
COMBO on the TV screen.
Then, use V/v/B/b and
perform menu operations.
To display the menus of Sony
TV, press TV (wj) and then
press MENU.
components in recording
standby.)
xb)
Press to stop playback of the
VCR, CD player, VCD
player, LD player, DVD
player, MD deck, DAT
deck, tape deck, Blu-ray
disc recorder, PSX, DVD/
VHS COMBO, or DVD/
HDD COMBO.
to
L ./>b)
Press to skip tracks of the
VCR, CD player, VCD
player, LD player, DVD
player, MD deck, DAT deck,
tape deck, Blu-ray disc
recorder, PSX, DVD/VHS
COMBO, or DVD/HDD
COMBO.
TUNING +/–
M TV CH +a)/–
Press to scan a station.
Press TV (wj) and then
press TV CH +/– to select
preset TV channels.
PRESET
+a)/–
Press to
– select preset stations.
– select preset channels of
the VCR, satellite tuner,
Blu-ray disc recorder,
DVD player, DVD/VHS
COMBO, or DVD/HDD
COMBO.
m/Mb)
Press to
– search tracks in the forward/
backward direction of the
CD player, VCD player,
DVD player, LD player,
MD deck, Blu-ray disc
recorder, PSX, DVD/VHS
COMBO, or DVD/HDD
COMBO.
N F1, F2
Press F1 or F2 to select a
component.
• DVD/HDD COMBO
F1: HDD mode
F2: DVD mode
• DVD/VHS COMBO
F1: DVD mode
– fast forward/rewind of the
VCR, DAT deck, or tape
deck.
Ha)b)
Press to start playback of the
VCR, CD player, VCD
player, LD player, DVD
player, MD deck, DAT deck,
tape deck, Blu-ray disc
recorder, PSX, DVD/VHS
COMBO, or DVD/HDD
COMBO.
F2: VHS mode
TV INPUT
WIDE
Press TV (wj) and then
press TV INPUT to select
the input signal (TV input or
video input).
Press TV (wj) and then
press WIDE to select the
wide picture mode.
continued
11GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Name
Function
Name
Function
O DVD TOP
Press to display the menu or
on-screen guide of the DVD
player on the TV screen.
U
After pressing RECEIVER
(D), press MENU (K) for
receiver operation, then press
V/v/B /b to select the
,
MENU
V/v/B/b
Then, use V/v/B/b and
to
perform menu operations.
settings.
After pressing DVD TOP
MENU (O) or DVD MENU
(O), press V/v/B/b to select
thesettings, andthenpress
to enter the selection.
DVD MENU
P MUTING
Press to display the menu of
the DVD player on the TV
screen. Then, use V/v/B/b
and
to perform menu
operations.
Press
also to enter the
Press to mute the sound (page
41).
To mute the sound of the TV,
press TV (wj) and then press
MUTING.
selection of the receiver,
VCR, satellite tuner, DVD
player, Blu-ray disc recorder,
PSX, DVD/VHS COMBO, or
DVD/HDD COMBO.
Q TV VOL +/–
Press TV (wj) and then press
TV VOL +/– to adjust the TV
volume level.
V GUIDE
Press to display the EPG
(Electronic Program Guide)
of the TV, DVD player,
satellite tuner, Blu-ray disc
recorder, PSX, or DVD/HDD
COMBO.
MASTER
VOL +/–
Press to adjust the volume
level of all speakers at the
same time.
W CLEAR
Press to clear a mistake when
you press the incorrect
numeric button of the DVD
player, Blu-ray disc recorder,
PSX, satellite tuner, DVD/
VHS COMBO, or DVD/HDD
COMBO.
R DISC SKIP
Press to skip disc of the CD
player, VCD player, DVD
player, or MD deck (multi-
disc changer only).
<
S REPLAY
/
Press to replay the previous
< scene or fast forward the
current scene of the DVD
player, Blu-ray disc recorder,
DVD/VHS COMBO, or
DVD/HDD COMBO.
ADVANCE
-/--
Press to select the channel
entry mode, either one or two
digit of the VCR or satellite
tuner.
To select the channel entry
mode of the TV, press TV
(wj) and then press -/--.
T RETURN/
Press to
– return to the previous menu.
– exit the menu while the
menu or on-screen guide of
the VCD player, LD player,
DVD player, Blu-ray disc
recorder, PSX, DVD/VHS
COMBO, or satellite tuner
is displayed on the TV
screen.
EXIT O
>10
Press to select track numbers
over 10 of the CD player,
VCD player, LD player, MD
deck, tape deck, TV, VCR, or
satellite tuner.
X SLEEP
Press to activate the Sleep
Timer function and the
duration which the receiver
turns off automatically.
To return to the previous
menu of Sony TV, press TV
(wj) and then press
RETURN/EXIT O.
Y FM MODE
Press to select FM monaural
or stereo reception.
Z 2CH
A.F.D.
Press to select a sound field
(page 59, 61, 64)
MOVIE
MUSIC
12GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Name
Function
wj TV
Press to light up the button. It
changes the remote key
function to activate the
buttons with orange printing.
It also activate the DISPLAY
(I), OPTIONS TOOLS
(J), MENU (K),
RETURN/EXIT O (T),
(U), and V/v/B/b (U)
buttons to perform menu
operations for Sony TVs only.
wk RM SET UP
Press to set up the remote.
a)The number 5, TV CH +, PRESET + and H
buttons have tactile dots. Use the tactile dots as
references when operating the receiver.
b)This button is also available for DIGITAL
MEDIA PORT adapter operation. For details on
the function of the button, see the operating
instructions supplied with the DIGITAL MEDIA
PORT adapter.
Notes
• Some functions explained in this section may not
work depending on the model.
• The above explanation is intended to serve as an
example only. Therefore, depending on the
component, the above operation may not be
possible or may operate differently than described.
13GB
Download from Www.Somanuals.com. All Manuals Search And Download.
1: Installing speakers
This receiver allows you to use a 7 channel
speaker with 4 sub woofer system.
You can enjoy high fidelity reproduction of
DVD software recorded sound in the Surround
EX format if you connect one additional
surround back speaker (6.1 channel) or two
surround back speakers (7.1 channel) (see
“Using the surround back decoding mode” on
page 51).
Enjoying a 5.1/7.1 channel
system
To fully enjoy theater-like multi channel
surround sound requires five speakers (two
front speakers, a center speaker, and two
surround speakers) and a sub woofer (5.1
channel).
Example of a 7.1 channel
speaker system configuration
Example of a 5.1 channel
speaker system configuration
AFront speaker (Left)
BFront speaker (Right)
CCenter speaker
DSurround speaker (Left)
ESurround speaker (Right)
FSurround back speaker (Left)
GSurround back speaker (Right)
HSub woofer
AFront speaker (Left)
BFront speaker (Right)
CCenter speaker
DSurround speaker (Left)
ESurround speaker (Right)
HSub woofer
Tips
• When you connect a 6.1 channel speaker system,
place the surround back speaker behind the
listening position.
• Since the sub woofer does not emit highly
directional signals, you can place it wherever you
want.
14GB
Download from Www.Somanuals.com. All Manuals Search And Download.
2: Connecting speakers
F
H
B
A
A
SPEAKERS
FRONT B
terminals
B
a)
L
L
AC OUTLET
VIDEO 2/BD IN
HDMI
OUT
Y
P
B/CB
R/CR
R
R
FRONT A
FRONT B
SPEAKERS
P
VIDEO IN
VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN
VIDEO OUT
MONITOR
SAT IN
DVD IN VIDEO
1
IN MONITOR OUT
L
L
COMPONENT VIDEO
L
L
L
R
R
R
R
R
CENTER
SURROUND BACK
SURROUND
AUDIO IN
SAT
AUDIO IN AUDIO OUT AUDIO IN AUDIO OUT
AUDIO OUT
AUDIO IN
SPEAKERS
DVD
VIDEO 2/BD
VIDEO 1
SUB WOOFER
b)
SUB WOOFER jacks
B
C
G
E
D
AMonaural audio cord (not supplied)
BSpeaker cord (not supplied)
AFront speaker A (Left)
BFront speaker A (Right)
CCenter speaker
ESurround speaker (Right)
FSurround back speaker (Left)
c)
c)
GSurround back speaker (Right)
d)
DSurround speaker (Left)
HSub woofer
continued
15GB
Download from Www.Somanuals.com. All Manuals Search And Download.
a)If you have an additional front speaker system,
connect them to the SPEAKERS FRONT B
terminals. You can select the front speakers you
want to use with the SPEAKERS (OFF/A/B/A+B)
button on the receiver (page 33).
3a: Connecting the audio
components
b)If you have an additional sub woofer, connect it to
any of the SUB WOOFER jacks. You can connect
up to 4 sub woofers.
components
c)If you connect only one surround back speaker,
connect it to the SPEAKERS SURROUND
BACK L terminals.
This section describes how to connect your
audio components to this receiver. Before you
begin, refer to “Component to be connected”
below for the pages which describe how to
connect each component.
After connecting your audio component,
proceed to “3b: Connecting the video
components” (page 19) or “4: Connecting the
antennas” (page 30).
d)When you connect a sub woofer with an auto
standby function, turn off the function when
watching movies. If the auto standby function is
set to on, it turns to standby mode automatically
based on the level of the input signal to a sub
woofer, then sound may not be output.
Component to be connected
Component With
Page
Super Audio
CD player/
CD player/
CD recorder
Digital audio outputa)
17
Analog audio output
onlyb)
18
MD deck,
tape deck,
etc.
Analog audio output
onlyb)
18
a)Model with DIGITAL COAXIAL OUTPUT jack
etc.
b)Model equipped only with AUDIO OUT L/R
jacks, etc.
16GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting components with
digital audio output jack
The following illustration shows how to
connect a Super Audio CD player, CD player
or CD recorder.
Super Audio
CD player/
CD player/
CD recorder
A
B
DIGITAL
L
L
(ASSIGNABLE)
SAT
IN
SAT IN
DVD IN
VIDEO 2/BD IN
HDMI
OUT
Y
VIDEO 2/
BD IN
ANTENNA
P
B/CB
R/CR
R
R
VIDEO
IN
1
FRONT A
FRONT B
AM
OPTICAL
SPEAKERS
P
SA-CD/
CD/CD-R
IN
L
L
VIDEO IN
VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN
VIDEO OUT
MONITOR
SAT IN
DVD IN VIDEO
1
IN MONITOR OUT
COMPONENT VIDEO
DVD
IN
COAXIAL
L
L
L
L
L
R
R
R
R
R
R
R
CENTER
SURROUND BACK
SURROUND
IN
OUT
IN
IN
AUDIO IN
SAT
AUDIO IN AUDIO OUT AUDIO IN
AUDIO OUT AUDIO IN
AUDIO OUT
SPEAKERS
DMPORT
AUX
SA–CD/CD/CD–R
TV
DVD
VIDEO 2/BD
VIDEO 1
SUB WOOFER
ACoaxial digital cord (not supplied)
BAudio cord (not supplied)
Notes
Tip
• When you play back a Super Audio CD disc on a
Super Audio CD player, the sound is output only if
you make the connection to SA-CD/CD/CD-R IN
jacks (analog input jack) on the receiver. Refer to
the operating instructions supplied with the Super
Audio CD player.
All the digital audio jacks are compatible with 32
kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
• You can only make analog recording on this
receiver.
17GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting components with
analog audio jacks
The following illustration shows how to
connect a component which has analog jacks
such as tape deck, etc.
INPUT
Super Audio
CD player/
CD player/
CD recorder
A
DIGITAL
L
L
(ASSIGNABLE)
SAT
IN
SAT IN
DVD IN
VIDEO 2/BD IN
HDMI
OUT
Y
VIDEO 2/
BD IN
ANTENNA
P
B/CB
R/CR
R
R
VIDEO
IN
1
FRONT A
FRONT B
AM
SPEAKERS
OPTICAL
P
SA-CD/
CD/CD-R
IN
L
L
VIDEO IN
VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN
VIDEO OUT
MONITOR
SAT IN
DVD IN VIDEO
1
IN MONITOR OUT
COMPONENT VIDEO
DVD
IN
COAXIAL
L
L
L
L
L
R
R
R
R
R
R
R
CENTER
SURROUND BACK
SURROUND
IN
OUT
IN
IN
AUDIO IN
SAT
AUDIO IN AUDIO OUT AUDIO IN
AUDIO OUT AUDIO IN
AUDIO OUT
SPEAKERS
DMPORT
AUX
SA–CD/CD/CD–R
TV
DVD
VIDEO 2/BD
VIDEO 1
SUB WOOFER
A
CD player,
MD deck,
tape deck,
etc. *
AAudio cord (not supplied)
* You can connect an audio component (except turntable) to the AUX IN jack so that you can listen to stereo
sources in surround sound.
18GB
Download from Www.Somanuals.com. All Manuals Search And Download.
How to connect your
components
Video input/output jack to be
connected
This section describes how to connect your
video components to this receiver. Before you
begin, refer to “Component to be connected”
below for the pages which describe how to
connect each component.
The image quality depends on the connecting
Select the connection according to the jacks on
your components.
After connecting all your components,
proceed to “4: Connecting the antennas” (page
30).
Component to be connected
Digital
Analog
Component
Page
With HDMI jack
TV
20
High quality image
22
DVD player/DVD recorder
Satellite tuner/Set-top box
VCR
24
Notes
• Connect image display components such as a TV
OUT jack on the receiver.
26
27
• Be sure to turn on the receiver when the video and
audio of a playback component are being output to
a TV via the receiver. If the power supply of the
receiver is not turned on, neither video nor audio is
transmitted.
Camcorder, video game, etc.
27
Converting video signals
This receiver is equipped with a function for
up-converting video signals. For details, see
page 28.
19GB
Download from Www.Somanuals.com. All Manuals Search And Download.
HDMI features
Connecting components with
HDMI jacks
• A digital audio signals transmitted by HDMI
can be output from the speakers connected to
the receiver. This signal supports Dolby
Digital, DTS, and linear PCM.
HDMI is the abbreviated name for High-
Definition Multimedia Interface. It is an
interface which transmits video and audio
signals in digital format.
• Analog video signals input to the VIDEO
jack or COMPONENT VIDEO jacks can be
output as HDMI signals. Audio signals are
not output from an HDMI OUT jack when
the image is converted.
Satellite tuner
DVD player
Blu-ray disc player
TV, projector, etc.
Audio/video
signals
Audio/video
signals
Audio/video
signals
Audio/video
signals
A
A
A
A
DIGITAL
(ASSIGNABLE)
L
L
SAT
IN
SAT IN
DVD IN
VIDEO 2/BD IN
HDMI
OUT
Y
VIDEO 2/
BD IN
ANTENNA
P
B/CB
R/CR
R
R
VIDEO
IN
1
FRONT A
FRONT B
AM
OPTICAL
SPEAKERS
P
SA-CD/
CD/CD-R
IN
L
L
VIDEO IN
VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN
VIDEO OUT
MONITOR
SAT IN
DVD IN VIDEO
1
IN MONITOR OUT
COMPONENT VIDEO
DVD
IN
COAXIAL
L
L
L
L
L
R
R
R
R
R
R
R
CENTER
SURROUND BACK
SURROUND
IN
OUT
IN
IN
AUDIO IN
SAT
AUDIO IN AUDIO OUT AUDIO IN
AUDIO OUT AUDIO IN
AUDIO OUT
SPEAKERS
DMPORT
AUX
SA–CD/CD/CD–R
TV
DVD
VIDEO 2/BD
VIDEO 1
SUB WOOFER
AHDMI cable (not supplied)
We recommend that you use a Sony HDMI cable.
20GB
Download from Www.Somanuals.com. All Manuals Search And Download.
• Audio signals (sampling frequency, bit
length, etc.) transmitted from a HDMI jack
may be suppressed by the connected
component. Check the setup of the
connected component if the image is poor or
the sound does not come out of a component
connected via the HDMI cable.
• Sound may be interrupted when the
sampling frequency or the number of
channels of audio output signals from the
playback component is switched.
If you connect a Blu-ray disc
player
• Be sure to change the factory setting of the
VIDEO 2 input button on the remote so that
you can use the button to control your Blu-
ray disc player. For details, see
“Programming the remote” (page 78).
• You can also rename the VIDEO 2 input so
that it can be displayed on the receiver’s
display. For details, see “Naming inputs”
(page 76).
• When the connected component is not
compatible with copyright protection
technology (HDCP), the image and/or the
sound from the HDMI OUT jack may be
distorted or may not be output.
connected component.
• Set the resolution of the image of the
playback component to 720p or 1080i when
you output 96 kHz multi channel sound over
a HDMI connection.
• We do not recommend using a HDMI-DVI
conversion cable. When you connect a
HDMI-DVI conversion cable to a DVI-D
component, the sound and/or the image may
not be output.
Notes on HDMI connections
• Use a HDMI cable with the HDMI logo
(made by Sony).
• An audio signal input to the HDMI IN jack
is output from the SPEAKERS jacks and
HDMI OUT jack. It is not output from any
other audio jacks.
• Video signals input to the HDMI IN jack can
only be output from the HDMI OUT jack.
The video input signals cannot be output
from the VIDEO OUT jacks or MONITOR
OUT jacks.
• When you want to listen to the sound from
the TV speaker, set “AUDIO” to
“TV+AMP” in the VIDEO menu (page 54).
If you cannot play back multi channel
software, set to “AMP”. However, the sound
will not output from the TV speaker.
• The multi/stereo area audio signals of a
Super Audio CD are not output.
• Refer to the operating instructions of each
connected component for details.
• Be sure to turn on the receiver when the
video and audio of a playback component
are being output to a TV via the receiver. If
the power supply of the receiver is not
turned on, neither video nor audio is
transmitted.
21GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a TV
The image from a visual component connected
to this receiver can be displayed on a TV
screen.
It is not necessary to connect all the cords.
Connect audio and video cords according to
the jacks of your components.
TV
Video signals
Audio signals
A
B
C
DIGITAL
(ASSIGNABLE)
L
L
SAT
IN
SAT IN
DVD IN
VIDEO 2/BD IN
HDMI
OUT
Y
VIDEO 2/
BD IN
ANTENNA
P
B/CB
R/CR
R
R
VIDEO
IN
1
FRONT A
FRONT B
AM
SPEAKERS
OPTICAL
P
SA-CD/
CD/CD-R
IN
L
L
VIDEO IN
VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN
VIDEO OUT
MONITOR
SAT IN
DVD IN VIDEO
1
IN MONITOR OUT
COMPONENT VIDEO
DVD
IN
COAXIAL
L
L
L
L
L
R
R
R
R
R
R
R
CENTER
SURROUND BACK
SURROUND
IN
OUT
IN
IN
AUDIO IN
SAT
AUDIO IN AUDIO OUT AUDIO IN
AUDIO OUT AUDIO IN
AUDIO OUT
SPEAKERS
DMPORT
AUX
SA–CD/CD/CD–R
TV
DVD
VIDEO 2/BD
VIDEO 1
SUB WOOFER
AAudio cord (not supplied)
BVideo cord (not supplied)
CComponent video cord (not supplied)
22GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
• Connect image display components such as a TV
or a projector to the MONITOR OUT jack on the
receiver.
• Be sure to turn on the receiver when the video and
audio of a playback component are being output to
a TV via the receiver. If the power supply of the
receiver is not turned on, neither video nor audio is
transmitted.
Tips
• You can watch the selected input image when you
connect the MONITOR OUT jack to a TV.
• You can also display the amplifier menus and the
sound field on the TV screen when you set the
“OSD” to “OSD ON” in the VIDEO menu. Be sure
to connect the HDMI OUT or MONITOR VIDEO
OUT jack to your TV. If you connect only the
COMPONENT VIDEO MONITOR OUT jacks to
the TV, the on-screen display is not output.
• To output the TV sound from the speakers
connected to the receiver, be sure to
– connect the audio output jacks of the TV to the
TV IN jacks of the receiver.
– turn off or mute the TV’s volume.
23GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Note
Connecting a DVD player/DVD
recorder
To input multi channel digital audio from the DVD
player, set the digital audio output setting on the
DVD player. Refer to the operating instructions
supplied with the DVD player.
The following illustration shows how to
connect a DVD player and DVD recorder.
It is not necessary to connect all the cords.
Connect audio and video cords according to
the jacks of your components.
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
Connecting a DVD player
DVD player
Audio signals
Video signals
D
A
B
C
DIGITAL
(ASSIGNABLE)
L
L
SAT
IN
SAT IN
DVD IN
VIDEO 2/BD IN
HDMI
OUT
Y
VIDEO 2/
BD IN
ANTENNA
P
B/CB
R/CR
R
R
VIDEO
IN
1
FRONT A
FRONT B
AM
OPTICAL
SPEAKERS
P
SA-CD/
CD/CD-R
IN
L
L
VIDEO IN
VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN
VIDEO OUT
MONITOR
SAT IN
DVD IN VIDEO
1
IN MONITOR OUT
COMPONENT VIDEO
DVD
IN
COAXIAL
L
L
L
L
L
R
R
R
R
R
R
R
CENTER
SURROUND BACK
SURROUND
IN
OUT
IN
IN
AUDIO IN
SAT
AUDIO IN AUDIO OUT AUDIO IN
AUDIO OUT AUDIO IN
AUDIO OUT
SPEAKERS
DMPORT
AUX
SA–CD/CD/CD–R
TV
DVD
VIDEO 2/BD
VIDEO 1
SUB WOOFER
ACoaxial digital cord (not supplied)
BAudio cord (not supplied)
CVideo cord (not supplied)
DComponent video cord (not supplied)
24GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting a DVD recorder
DVD recorder
Audio signals
Video signals
A
B
C
D
DIGITAL
(ASSIGNABLE)
L
L
SAT
IN
SAT IN
DVD IN
VIDEO 2/BD IN
HDMI
OUT
Y
VIDEO 2/
BD IN
ANTENNA
P
B/CB
R/CR
R
R
VIDEO
IN
1
FRONT A
FRONT B
AM
SPEAKERS
OPTICAL
P
SA-CD/
CD/CD-R
IN
L
L
VIDEO IN
VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN
VIDEO OUT
MONITOR
SAT IN
DVD IN VIDEO
1
IN MONITOR OUT
COMPONENT VIDEO
DVD
IN
COAXIAL
L
L
L
L
L
R
R
R
R
R
R
R
CENTER
SURROUND BACK
SURROUND
IN
OUT
IN
IN
AUDO IN
SAT
AUDIO IN AUDIO OUT AUDIO IN
AUDIO OUT AUDIO IN
AUDIO OUT
SPEAKERS
DMPORT
AUX
SA–CD/CD/CD–R
TV
DVD
VIDEO 2/BD
VIDEO 1
SUB WOOFER
BAudio cord (not supplied)
CVideo cord (not supplied)
DComponent video cord (not supplied)
Notes
Tip
• Be sure to change the factory setting of the VIDEO
1 input button on the remote so that you can use the
button to control your DVD recorder. For details,
see “Programming the remote” (page 78).
• You can also rename the VIDEO 1 input so that it
can be displayed on the receiver’s display. For
details, see “Naming inputs” (page 76).
• When connecting optical digital cords, insert the
plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
25GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
Connecting a satellite tuner/
set-top box
• When connecting optical digital cords, insert the
plugs straight in until they click into place.
• Do not bend or tie optical digital cords.
The following illustration shows how to
connect a satellite tuner or set-top box.
It is not necessary to connect all the cords.
Connect audio and video cords according to
the jacks of your components.
Tip
All the digital audio jacks are compatible with
32 kHz, 44.1 kHz, 48 kHz, and 96 kHz sampling
frequencies.
Satellite tuner/Set-top box
Audio signals
Video signals
A
B
C
D
DIGITAL
L
L
(ASSIGNABLE)
SAT
IN
SAT IN
DVD IN
VIDEO 2/BD IN
HDMI
OUT
Y
VIDEO 2/
BD IN
ANTENNA
AM
P
B/CB
R/CR
R
R
VIDEO
IN
1
FRONT A
FRONT B
OPTICAL
SPEAKERS
P
SA-CD/
CD/CD-R
IN
L
L
VIDEO IN
VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN
VIDEO OUT
MONITOR
SAT IN
DVD IN VIDEO
1
IN MONITOR OUT
COMPONENT VIDEO
DVD
IN
COAXIAL
L
L
L
L
L
R
R
R
R
R
R
R
CENTER
SURROUND BACK
SURROUND
IN
OUT
IN
IN
AUDIO IN
SAT
AUDIO IN AUDIO OUT AUDIO IN
AUDIO OUT AUDIO IN
AUDIO OUT
SPEAKERS
DMPORT
AUX
SA–CD/CD/CD–R
TV
DVD
VIDEO 2/BD
VIDEO 1
SUB WOOFER
AAudio cord (not supplied)
BOptical digital cord (not supplied)
CVideo cord (not supplied)
DComponent video cord (not supplied)
26GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Connecting components with
analog video and audio jack
The following illustration shows how to
connect a component which has analog jacks
such as a VCR, etc.
VCR
Audio signals
Video signals
A
B
DIGITAL
(ASSIGNABLE)
L
L
SAT
IN
SAT IN
DVD IN
VIDEO 2/BD IN
HDMI
OUT
Y
VIDEO 2/
BD IN
ANTENNA
P
B/CB
R/CR
R
R
VIDEO
IN
1
FRONT A
FRONT B
AM
OPTICAL
SPEAKERS
P
SA-CD/
CD/CD-R
IN
VIDO IN
VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN
VIDEO OUT
MONITOR
SAT IN
DVD IN VIDEO
1
IN MONITOR OUT
L
L
COMPONENT VIDEO
DVD
IN
COAXIAL
L
L
L
L
L
R
R
R
R
R
R
R
CENTER
SURROUND BACK
SURROUND
IN
OUT
IN
IN
AUO IN
SAT
AUDIO IN AUDIO OUT AUDIO IN
AUDIO OUT AUDIO IN
AUDIO OUT
SPEAKERS
DMPORT
AUX
SA–CD/CD/CD–R
TV
DVD
VIDEO 2/BD
VIDEO 1
SUB WOOFER
VIDEO 3 IN/PORTABLE AV IN
VIDEO
L
AUDIO
R
To the VIDEO 3 IN/PORTABLE AV IN jacks
(Front panel)
Camcorder/
video game
C
AAudio cord (not supplied)
BVideo cord (not supplied)
CAudio/video cord (not supplied)
27GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Function for conversion of video
signals
This receiver is equipped with a function for
converting video signals.
Video signals and component video signals
can be output as HDMI video signals and this
up-converted video signals can only be output
from the HDMI OUT jack. Refer to the
illustration that follows.
In the video input/output conversion table of the receiver
Input Signals
DIGITAL
(ASSIGNABLE)
L
Output Signals
SAT
IN
SAT IN
DVD IN
VIDEO 2/BD IN
HDMI
VIDEO 2/
BD IN
ANTENNA
R
FRO
VIDEO
IN
1
AM
OPTICAL
SPE
SA-CD/
CD/CD-R
IN
L
VIDEO IN
VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN
SAT IN
DVD IN VIDEO
1
IN MONITOR OUT
COMPONENT VIDEO
DVD
IN
C
B
COAXIAL
L
L
L
L
R
R
R
R
CENTER
SURROUN
IN
OUT
IN
IN
AUDIO IN
AUDIO IN AUDIO OUT AUDIO IN
AUDIO OUT AUDIO IN
AUDIO OUT
SPEAKERS
DMPORT
AUX
SA–CD/CD/CD–R
TV
SAT
DVD
VIDEO 2/BD
VIDEO 1
SUB WOOFER
A B C
OUTPUT jack
COMPONENT VIDEO
MONITOR OUT
MONITOR VIDEO
OUT
HDMI OUT
INPUT jack
HDMI IN A
VIDEO IN B
f
X
X
X
a
f
COMPONENT
VIDEO IN C
a
f
X
a : Video signals are up-converted and output through the video converter.
f : The same type of signal as that of the input signal is output. Video signals are not converted.
X : Video signals are not output.
28GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes on converting video
signals
• When video signals from a VCR, etc., are
converted on this receiver and then output to
your TV, depending on the status of the
video signal output, the image on the TV
screen may appear distorted horizontally or
no image may be output.
• HDMI video signals cannot be converted to
component video signals and video signals.
• The up-converted video signals are output
only from the HDMI OUT jack. They are not
output from any other video jacks.
• When you play back a VCR with an image
improvement circuit, such as TBC, the
images may be distorted or may not be
output. In this case, set the image
improvement circuit function to off.
29GB
Download from Www.Somanuals.com. All Manuals Search And Download.
4: Connecting the antennas
Connect the supplied AM loop antenna and
FM wire antenna.
FM wire antenna (supplied)
AM loop antenna (supplied)
DIGITAL
L
L
(ASSIGNABLE)
SAT
IN
SAT IN
DVD N
VIDEO 2/BD IN
HDMI
OUT
Y
VIDEO 2/
BD IN
ANTENNA
P
B/CB
R/CR
R
R
VIDEO
IN
1
FRONT A
FRONT B
AM
SPEAKERS
OPTICAL
P
SA-CD/
CD/CD-R
IN
L
L
VIDEO IN
VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN
VIDEO OUT
MONITOR
SAT IN
DVD IN VIDEO
1
IN MONITOR OUT
COMPONENT VIDEO
DVD
IN
COAXIAL
L
L
L
L
L
R
R
R
R
R
R
R
CENTER
SURROUND BACK
SURROUND
IN
OUT
IN
IN
AUDIO IN
SAT
AUDIO IN AUDIO OUT AUDIO IN
AUDIO OUT AUDIO IN
AUDIO OUT
SPEAKERS
DMPORT
AUX
SA–CD/CD/CD–R
TV
DVD
VIDEO 2/BD
VIDEO 1
SUB WOOFER
* The shape of the connector varies depending on
the area code of this receiver.
Notes
• To prevent noise pickup, keep the AM loop
antenna away from the receiver and other
components.
• Be sure to fully extend the FM wire antenna.
• After connecting the FM wire antenna, keep it as
horizontal as possible.
30GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
• The AC OUTLET on the rear of the receiver is a
switched outlet, which supplies power to the
connected component only while the receiver is
turned on.
• Make sure that the total power consumption of the
component connected to the receiver’s AC
OUTLET does not exceed the wattage stated on the
rear panel. Do not connect high-wattage electrical
home appliances such as electric irons, fans, or
TVs to this outlet. This may cause a malfunction.
5: Preparing the receiver
and the remote
Setting the voltage selector
If your receiver has a voltage selector on the
rear panel, check that the voltage selector is set
to the local power supply voltage. If not, use a
screwdriver to set the selector to the correct
position before connecting the AC power cord
to a wall outlet.
VOLTAGE
SELECTOR
120V
220V
240V
Connecting the AC power cord
Connect the AC power cord to a wall outlet.
AC power cord
AC OUTLET*
L
L
AC OUTLET
R
R
FRONT
A
FRONT
B
SPEAKERS
L
L
R
R
SURROUND BACK
SURROUND
EAKERS
To the wall outlet
* Models of area code E2 only.
31GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Performing initial setup
operations
Inserting batteries into the
remote
Before using the receiver for the first time,
initialize the receiver by performing the
following procedure. This procedure can also
be used to return settings you have made to
their factory defaults.
Insert two R6 (size-AA) batteries in the
RM-AAP017 remote commander.
Observe the correct polarity when installing
batteries.
Be sure to use the buttons on the receiver for
this operation.
1,2
?/1
MASTER VOLUME
MULTI CHANNEL DECODING
TONE MODE
TUNING MODE
TUNING
DISPLA
Y
INPUT MODE
TONE
INPUT SELECTOR
SPEAKERS
(OFF/A/B/A+B)
AUTO CAL MIC
PHONES
MEMORY/
ENTER
SUR BACK
DECODING
DIMMER
SLEEP
2CH
A.F.D.
MOVIE
MUSIC
AUTO CAL
DIRECT
VIDEO
3
IN/PORTABLE AV IN
VIDEO
L
AUDIO
R
Notes
• Do not leave the remote in an extremely hot or
humid place.
• Do not use a new battery with old ones.
• Do not mix alkaline batteries and other kinds of
batteries.
• Do not expose the remote sensor to direct sunlight
or lighting apparatuses. Doing so may cause a
malfunction.
• If you do not intend to use the remote for an
extended period of time, remove the batteries to
avoid possible damage from battery leakage and
corrosion.
3
1 Press ?/1 to turn off the
receiver.
2 Hold down ?/1 for 5 seconds.
“PUSH” and “ENTER” appears on the
display alternately.
3 Press MEMORY/ENTER.
• When you replace the batteries, the programmed
remote codes may be cleared. If this happens,
program the remote codes again (page 78).
After “CLEARING” appears on the
display for a while, “CLEARED”
appears.
The following items are reset to their
factory settings.
• All settings in the LEVEL, EQ, SUR,
TUNER, AUDIO, VIDEO, SYSTEM
and A. CAL menus.
Tip
Under normal conditions, the batteries should last
for about 3 months. When the remote no longer
operates the receiver, replace all the batteries with
new ones.
• The sound field memorized for each
input and preset station.
• All sound field parameters.
• All preset stations.
• All index names for inputs and preset
stations.
• MASTER VOLUME is set to “VOL
MIN”.
• Input is set to “DVD”.
32GB
Download from Www.Somanuals.com. All Manuals Search And Download.
6: Selecting the speaker
system
You can select the front speakers you want to
drive.
7: Calibrating the
appropriate settings
automatically
(AUTO CALIBRATION)
Be sure to use the buttons on the receiver for
this operation.
This receiver is equipped with DCAC (Digital
Cinema Auto Calibration) Technology which
allows you to perform automatic calibration as
follows:
SPEAKERS (OFF/A/B/A+B)
?/1
MASTER VOLUME
• Check the connection between each speaker
and the receiver.
• Adjust the speaker level.
MULTI CHANNEL DECODING
TONE MODE
TONE
TUNING MODE
TUNING
DISPLA
Y
INPUT MODE
INPUT SELECTOR
SPEAKERS
(OFF/A/B/A+B)
AUTO CAL MIC
PHONES
MEMORY/
ENTER
SUR BACK
DECODING
DIMMER
SLEEP
2CH
A.F.D.
MOVIE
MUSIC
AUTO CAL
DIRECT
VIDEO
3
IN/PORTABLE AV IN
• Measure the distance of each speaker to your
listening position.
VIDEO
L
AUDIO
R
• Measure the speaker polarity.
• Measure the speaker size.
Press SPEAKERS (OFF/A/B/A+B)
repeatedly to select the front
speaker system you want to drive.
* • DTS 96/24 signals are always played back as 48
kHz when you correct signals.
To select
Light up
• The measurement result is not utilized for
signals with a sampling frequency of more than
96 kHz.
The speakers connected to the
SPEAKERS FRONT A terminals
SP A
The speakers connected to the
SP B
SPEAKERS FRONT B terminals
The DCAC is designed to obtain proper sound
balance in your room. However, you can
adjust the speaker levels and balance manually
according to your preference. For details, see
“8: Adjusting the speaker levels and balance
(TEST TONE)” (page 39).
The speakers connected to both the
SPEAKERS FRONT A and B
terminals (parallel connection)
SP A and
SP B
To turn off the speaker output
Press SPEAKERS (OFF/A/B/A+B)
repeatedly until the “SP A” and “SP B”
indicators on the display do not light up.
Note
You cannot switch the front speaker system by
pressing SPEAKERS (OFF/A/B/A+B) when the
headphones are connected.
33GB
Download from Www.Somanuals.com. All Manuals Search And Download.
1 Connect the supplied optimizer
microphone to the AUTO CAL
MIC jack.
Before you perform Auto
Calibration
Before you perform the Auto Calibration, set
up and connect the speakers (page 14, 15).
• The AUTO CAL MIC jack is used for the
supplied optimizer microphone only. Do not
connect other microphones to this jack.
Doing so may damage the receiver and the
microphone.
• During the calibration, the sound that comes
out of the speakers is very loud. Pay
attention to the presence of children or to the
effect on your neighborhood.
2 Set up the optimizer
microphone.
Place the optimizer microphone at your
listening position. Use a stool or tripod so
that the optimizer microphone remains at
the same height as your ears.
On setting up the active sub
woofer
• When a sub woofer is connected, turn on the
sub woofer and turn up the volume
beforehand. Turn the VOLUME knob to just
before the mid-point.
• If you connect a sub woofer with a crossover
frequency function, set the value to the
maximum.
• If you connect a sub woofer with an auto
standby function, set this function to off
(deactivated).
• Perform the Auto Calibration in a quiet
environment to avoid the effect of noise and
get a more accurate measurement.
• If there are any obstacles in the path between
the optimizer microphone and the speakers,
the calibration cannot be performed
correctly. Remove any obstacles from the
measurement area to avoid measurement
error.
Note
The Auto Calibration function does not work in the
following cases.
– ANALOG DIRECT is selected.
– Headphones are connected.
?/1
MASTER VOLUME
MULTI CHANNEL DECODING
TONE MODE
TONE
TUNING MODE
TUNING
DISPLA
Y
INPUT MODE
Optimizer microphone
INPUT SELECTOR
SPEAKERS
(OFF/A/B/A+B)
AUTO CAL MIC
MEMORY/
ENTER
SUR BACK
DECODING
DIMMER
SLEEP
2CH
A.F.D.
MOVIE
MUSIC
AUTO CAL
DIRECT
VIDEO
3
IN/PORTABLE
AV
IN
PHONE
VIDEO
L
AUDIO
R
Note
Depending on the characteristics of the sub woofer
you are using, the setup distance value may be
further away from the actual position.
34GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Press AUTO CAL.
Measurement starts in 5 seconds and the
display changes as follows:
Performing Auto Calibration
A. CAL [5] t A. CAL [4] t A. CAL [3] t
A. CAL [2] t A. CAL [1]
The measurement process will take
approximately 30 seconds to complete.
The table below shows the display when
measurement starts.
?/1
?/1
switch
AV ?/1
TV RM SET UP
SYSTEM STANDBY
VIDEO 1 VIDEO 2 VIDEO 3
DVD
Input
buttons
SAT
AUX
2CH
TV
SA-CD/CD TUNER
RECEIVER
DMPORT
A.F.D.
RECEIVER
MOVIE
MUSIC
Measurement for
Display
TONE
T.S.P.
SLEEP FM MODE D.TUNING AUTO CAL
AUTO
CAL
Speaker existance
Speaker gain, distance,
frequency response
1
4
7
2
5
3
6
9
Sub woofer gain and distance WOOFER
8
Note
- --
/
CLEAR
ENTER
0/10
You cannot measure the speaker height of the
surround speakers and the surround back speakers.
Set this value using the “SUR POS.” parameter in
the SYSTEM menu (page 58).
>10
GUIDE
MEMORY
DISPLAY
V
B
B
,
V/v
Tip
v
The measurements may not be performed correctly
or Auto Calibration cannot be performed when
special speakers, such as dipole speakers are used.
OPTIONS
TOOLS
RETURN/
MENU
EXIT
REPLAY ADVANCE
.
<
>
<
+
TUNING –
TUNING
m
M
To cancel Auto Calibration
The Auto Calibration function will be
canceled when you do the following during the
measurement process:
– Press ?/1, input buttons or MUTING.
– Press SPEAKERS (OFF/A/B/A+B) on the
receiver.
H
DISC SKIP
X
x
TV VOL
TV CH
MASTER VOL PRESET
MUTING
MASTER
VOL +/–
MUTING
DVD
– Change the volume level.
– Press AUTO CAL again.
– Connect the headphones.
35GB
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Save the measurement result.
Confirming/saving the
measurement results
Select “SAVE” in step 2.
The measurement results are saved and
you can select the calibration type in the
1 Confirm the measurement
result.
For details on calibration type, see page
When the measurement ends, a beep
sounds and the measurement result
appears on the display.
Tip
The size of a speaker (LARGE/SMALL) is
determined by the low frequency characteristics.
The measurement results may vary, depending on
the position of the optimizer microphone and
speakers, and the shape of the room. It is
recommended that you follow the measurement
results. However, you can change those settings in
the SYSTEM menu (page 47). Save the
measurement results first, then try to change the
settings if you want.
Measurement Display
result
Explanation
When the
measurement
process
SAVE
Proceed to step
2.
completes
properly
When the
measurement
process fails
ERROR
XXXX
See “When
error codes
appear” (page
36).
When error codes appear
Try the remedies and perform the Auto
2 Press RECEIVER and then
press V/v repeatedly to select
the item. Then, press
.
Error code
Cause and remedies
Item
Explanation
ERROR 31
The SPEAKERS (OFF/A/B/
and perform the Auto Calibration
again.
RETRY
Performs the Auto
Calibration again.
SAVE
Saves the measurement
results and exits the setting
process.
ERROR 32
None of the speakers were
detected. Make sure that the
optimizer microphone is
connected properly and perform
the Auto Calibration again.
If the optimizer microphone is
connected properly but the error
code appears, the optimizer
microphone cable may be
damaged or improperly
WARN CHK
Displays warning
concerning the
measurement results. See
“When you select “WARN
CHK”” (page 37).
PHASE
Displays the phase of each
speaker (in phase/out of
phase). See “When you
select “PHASE”” (page 37).
connected.
ERROR F 33
• None of the front speakers are
connected or only one front
speaker is connected.
• The optimizer microphone is
not connected.
DISTANCE
LEVEL
EXIT
Displays the measurement
result for speaker distance.
Displays the measurement
result for speaker level.
Exits the setting process
without saving the
measurement results.
36GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Error code
Cause and remedies
Warning code Explanation
WARN 40 The Auto Calibration has
ERROR SR 33 • Either the left or right surround
speakers is not connected.
• Surround back speakers are
connected even though
completed. However, the noise
level is high. You may be able to
perform the Auto Calibration
properly if you try it again, even
though the measurement cannot
be performed in all environments.
Try to perform the Auto
surround speakers are not
connected. Connect the
surround speakers to the
SPEAKERS SURROUND
terminals.
Calibration in a quiet
environment.
ERROR SB 33 The surround back speaker is
connected only to the
WARN 41
The sound input from the
optimizer microphone is out of
range. It is louder than the loudest
sound that can be measured. Try
to perform the Auto Calibration
when the environment is quiet
enough to allow proper
SPEAKERS SURROUND
BACK R terminals. When you
connect only one surround back
speaker, connect it to the
SPEAKERS SURROUND
BACK L terminals.
measurement.
WARN 42
WARN 43
NO WARN
The volume of the receiver is out
of range. Try to perform the Auto
Calibration when the
environment is quiet enough to
allow proper measurement.
• CODE 31
1 Press RECEIVER.
The RECEIVER indicator lights up and
receiver operation is activated.
2 Press
.
The distance and position of a sub
woofer cannot be detected. This
quiet environment.
3 Perform the Auto Calibration again (page 35).
• CODE 32, 33
1 Press RECEIVER.
The RECEIVER indicator lights up and
receiver operation is activated.
There is no warning information.
2 Press
.
When you select “PHASE”
You can check the phase of each speaker (in
phase/out of phase).
“RETRY Y” appears on the display.
3 Press
again.
4 Perform the Auto Calibration again (page 35).
Press V/v repeatedly to select a
When you select “WARN CHK”
If a warning on the measurement result is
present, detailed information is displayed.
speaker, then press
to return to
step 2 in “Confirming/saving the
measurement results”.
Press
to return to step 2 of
“Confirming/saving the
measurement results”.
continued
37GB
Download from Www.Somanuals.com. All Manuals Search And Download.
x CAL TYPE (Calibration type)*
• ENGINEER
Sets the frequency characteristics to a set
that matches that of the Sony listening room
standard.
Display
Explanation
xxx* IN
The speaker is in phase.
xxx* OUT The speaker is out of phase. The
“+” and “–” terminals of the
speaker may be connected the
other way around. However,
depending on the speakers,
“xxx OUT” appears on the
display even though the speakers
are connected properly. This is
because of the speakers’
specifications. In this case, you
can continue to use the receiver.
• FLAT
Makes the measurement of frequency from
each speaker flat.
• FRT REF
Adjusts the characteristics of all speakers to
match the characteristics of the front
speaker.
* xxx represent a speaker channel.
x CAL LOAD (Preset measurement
loading)*
FL
Front Left
FR
C
Front Right
Center
• LOAD NO
Select this when you do not want to load the
saved Auto Calibration result.
• LOAD YES
Select this when you want to load the saved
Auto Calibration result.
SL
Surround Left
Surround Right
Surround Back Left
Surround Back Right
Sub woofer
SR
SBL
SBR
SW
Tip
* You can select this parameter only when you have
performed the Auto Calibration and saved the
settings.
Depending on the position of the sub woofer, the
measurement results for polarity may vary.
However, there will be no problems even if you
continue to use the receiver with that value.
A. CAL menu parameters
Select “8-A. CAL” in the amplifier menus. For
details on adjusting the parameters, see
“Navigating through menus” (page 44) and
“Overview of the menus” (page 45).
x AUTO CAL (Auto Calibration on/
off)
• A.CAL NO
The Auto Calibration function is turned off.
• A.CAL YES
The Auto Calibration function is turned on.
To start Auto Calibration, press
.
38GB
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Press
or b to enter the
8: Adjusting the speaker
levels and balance
(TEST TONE)
menu.
4 Press V/v repeatedly to select
“T. TONE”.
5 Press
or b to enter the
You can adjust the speaker levels and balance
while listening to the test tone from your
listening position.
parameter.
6 Press V/v repeatedly to select
“T. TONE Y”.
Tip
The receiver employs a test tone with a frequency
centered at 800 Hz.
The test tone is output from each speaker
in sequence as follows:
Front left t Center t Front right t
Surround right t Surround back right*
t Surround back left* t Surround left
t Sub woofer
SYSTEM STANDBY
VIDEO 1 VIDEO 2 VIDEO 3
DVD
SAT
AUX
2CH
TV
SA-CD/CD TUNER
RECEIVER
Input
buttons
DMPORT
A.F.D.
1
MOVIE
MUSIC
* You will only hear the test tone from the
– surround back left and right speakers when
surround back speakers are set to “DUAL”.
– surround back left speaker when surround
back speakers are set to “SINGLE”.
SLEEP FM MODE D.TUNING AUTO CAL
1
4
7
2
5
3
6
9
8
7 Adjust the speaker levels and
balance using the LEVEL menu
so that the level of the test tone
sounds the same from each
speaker.
- --
/
CLEAR
ENTER
0/10
>10
GUIDE
MEMORY
DISPLAY
V
B
B
3-6
For details, see “Adjusting the level
(LEVEL menu)” (page 49).
v
OPTIONS
TOOLS
RETURN/
MENU
EXIT
Tips
REPLAY ADVANCE
2
• To adjust the level of all speakers at the same
time, press MASTER VOL +/–. You can also
use MASTER VOLUME on the receiver.
• The adjusted value are shown on the display
during adjustment.
.
<
>
<
+
TUNING –
TUNING
m
M
H
DISC SKIP
X
x
TV VOL
TV CH
MASTER VOL PRESET
MUTING
MASTER
VOL +/–
8 Repeat steps 1 to 6 to select
“T. TONE N”.
DVD
You can also press any input buttons.
The test tone turns off.
1 Press RECEIVER.
The RECEIVER indicator lights up and
receiver operation is activated.
2 Press MENU.
“1-LEVEL” appears on the display.
continued
39GB
Download from Www.Somanuals.com. All Manuals Search And Download.
When a test tone is not output
from the speakers
• The speaker cords may not be connected
securely.
Playback
• The speaker cords may have the short-circuit
problem.
Selecting a component
SYSTEM STANDBY
VIDEO 1 VIDEO 2 VIDEO 3
DVD
Note
1
The test tone does not work when ANALOG
DIRECT is selected.
SAT
AUX
2CH
TV
SA-CD/CD TUNER
RECEIVER
DMPORT
A.F.D.
MOVIE
MUSIC
SLEEP FM MODE D.TUNING AUTO CAL
1
4
7
2
5
3
6
9
8
- --
/
CLEAR
ENTER
0/10
>10
GUIDE
MEMORY
DISPLAY
V
B
B
v
OPTIONS
TOOLS
RETURN/
MENU
EXIT
REPLAY ADVANCE
.
<
>
<
+
TUNING –
TUNING
m
M
H
DISC SKIP
X
x
TV VOL
TV CH
MASTER VOL PRESET
MUTING
3
MUTING
DVD
1 Press one of the input buttons
to select the component you
want.
You can also use INPUT SELECTOR on
the receiver.
The selected input appears on the display.
40GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To mute the sound
Press MUTING.
Selected input Components that can
[Display]
be played back
The muting function will be canceled when
you do the following.
VIDEO 1
[VIDEO 1]
VCR, etc., connected to the
VIDEO 1 jack
• Press MUTING again.
• Increase the volume.
• Turn off the receiver.
VIDEO 2
Blu-ray disc player, etc.,
[VIDEO 2/BD]* connected to the VIDEO
2/BD jack
VIDEO 3
[VIDEO 3/
PORTABLE
AV]*
Camcorder, video game,
etc., connected to the
VIDEO 3 IN/PORTABLE
AV IN jack
To avoid damaging your
speakers
Before you turn off the receiver, be sure to turn
down the volume level.
DVD
[DVD]
DVD player, etc.,
connected to DVD jack
SAT
[SAT]
Satellite tuner, set-top box,
etc., connected to SAT jack
TV
[TV]
TV, etc., connected to TV
jack
SA-CD/CD
[SA-CD/CD/
CD-R]*
Super Audio CD player,
CD player, etc., connected
to the SA-CD/CD/CD-R
jack
TUNER
Built-in radio tuner
[FM or AM band]
AUX
[AUX]
Audio components
connected to the AUX jack
DMPORT
[DMPORT]
DIGITAL MEDIA PORT
adapter connected to
DMPORT jack
* “VIDEO 2/BD”, “VIDEO 3/PORTABLE
AV” and “SA-CD/CD/CD-R” scroll across
the display, then “VIDEO 2”, “VIDEO 3”
and “SA-CD/CD” appear respectively.
2 Turn on the component and
start playback.
3 Press MASTER VOL +/– to
adjust the volume.
You can also use MASTER VOLUME on
the receiver.
41GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Listening/Watching a component
Listening to a Super Audio CD/CD
?/1
TV RM SET UP AV ?/1
2
3
SYSTEM STANDBY
VIDEO
SAT
1
VIDEO
TV
2
VIDEO
3
DVD
SA-CD/CD TUNER
RECEIVER
AUX
DMPORT
A.F.D.
2CH
MOVIE
MUSIC
?/1
MASTER VOLUME
SLEEP FM MODE D.TUNING AUTO CAL
MULTI CHANNEL DECODING
TONE MODE
TONE
TUNING MODE
TUNING
DISPLAY
INPUT MODE
1
4
7
2
5
3
6
9
INPUT SELECTOR
SPEAKERS
(OFF/A/B/A+B)
5
3
8
-
--
/
AUTO CAL MIC
PHONES
SUR BACK
DECODING
CLEAR
ENTER
MEMORY/
ENTER
0/10
DIMMER
SLEEP
2CH
A.F.D.
MOVIE
MUSIC
AUTO CAL
DIRECT
>10
GUIDE
MEMORY
DISPLAY
VIDEO
3
IN/PORTABLE AV IN
V
v
VIDEO
L
AUDIO
R
B
B
OPTIONS
TOOLS
RETURN/
EXIT
MENU
REPLAY ADVANCE
.
<
<
>
+
TUNING
m
–
TUNING
M
H
X
DISC SKIP
x
TV VOL
TV CH
MASTER VOL PRESET
MUTING
5
DVD
Notes
1 Turn on the Super Audio CD player or CD
• The operation is described for a
Sony Super Audio CD player.
• Refer to the operating
instructions supplied with the
Super Audio CD player or CD
player.
player, then place the disc on the tray.
2 Turn on the receiver.
3 Press SA-CD/CD.
You can also use INPUT SELECTOR on the receiver to
select “SA-CD/CD/CD-R”.
Tips
• You can select the sound field to
suit the music. Refer to page 61
for details.
Recommended sound fields:
Classical: HALL
4 Play back the disc.
5 Adjust to a suitable volume.
6 After you have finished listening to the
Super Audio CD/CD, eject the disc and turn
off the receiver and Super Audio CD player
or CD player.
Jazz: JAZZ
Live concert: CONCERT
• You can listen to the sound that
was recorded in the 2 channel
format from all speakers (multi
channel). Refer to page 59 for
details.
42GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Watching a DVD
?/1
TV RM SET UP AV ?/1
MULTI CHANNEL DECODING lamp
2
3
SYSTEM STANDBY
VIDEO
SAT
1
VIDEO
TV
2
VIDEO
3
DVD
SA-CD/CD TUNER
RECEIVER
AUX
DMPORT
A.F.D.
2CH
MOVIE
MUSIC
?/1
MASTER VOLUME
SLEEP FM MODE D.TUNING AUTO CAL
MULTI CHANNEL DECODING
TONE MODE
TONE
TUNING MODE
TUNING
DISPLAY
INPUT MODE
1
4
7
2
5
3
6
9
INPUT SELECTOR
SPEAKERS
(OFF/A/B/A+B)
7
3
8
-
--
/
AUTO CAL MIC
PHONES
SUR BACK
DECODING
CLEAR
ENTER
MEMORY/
ENTER
0/10
DIMMER
SLEEP
2CH
A.F.D.
MOVIE
MUSIC
AUTO CAL
DIRECT
>10
MEMORY
DISPLAY
VIDEO
3
IN/PORTABLE AV IN
GUIDE
V
v
VIDEO
L
AUDIO
R
B
B
OPTIONS
TOOLS
RETURN/
EXIT
MENU
REPLAY ADVANCE
.
<
<
>
+
TUNING
m
–
TUNING
M
H
X
DISC SKIP
x
TV VOL
TV CH
MASTER VOL PRESET
MUTING
7
DVD
Notes
1 Turn on the TV and DVD player.
2 Turn on the receiver.
3 Press DVD.
• Refer to the operating
instructions supplied with the
TV and DVD player.
• Check the following if you
cannot listen to multi channel
sound.
– Be sure the audio source
corresponds to the multi
channel format (the MULTI
CHANNEL DECODING
lamp on the front panel lights
up during playback).
– Be sure this receiver is
connected to the DVD player
via a digital connection.
– Be sure the digital audio
output of the DVD player is
set up properly.
You can also use INPUT SELECTOR on the receiver to
select “DVD”.
4 Switch the input of the TV so that an image
of the DVD is displayed.
5 Set up the DVD player.
Refer to the “Quick Setup Guide” supplied with the
receiver.
6 Play back the disc.
7 Adjust to a suitable volume.
Tips
8 After you have finished watching the DVD,
eject the disc and turn off the receiver, TV
and DVD player.
• Select the audio format of the
disc to be played back, if
necessary.
• You can select the sound field to
suit the movie or music. Refer to
page 61 for details.
Recommended sound fields:
Movie: C.ST.EX
Music: CONCERT
43GB
Download from Www.Somanuals.com. All Manuals Search And Download.
6 Press
or b to enter the
Amplifier Operations
parameter.
7 Press V/v repeatedly to select
the setting you want.
Navigating through
menus
The setting is entered automatically.
8 Repeat steps 3 to 7 when you
By using the amplifier menus, you can make
various adjustments to customize the receiver.
want to make other settings.
AUX
2CH
DMPORT
A.F.D.
RECEIVER
MUSIC
1
To return to the previous
MOVIE
display
SLEEP FM MODE D.TUNING AUTO CAL
Press B.
1
4
7
2
5
3
6
9
To exit the menu
Press MENU.
However, if the RECEIVER indicator is light
off, press RECEIVER and then press MENU.
8
- --
/
CLEAR
ENTER
0/10
>10
GUIDE
MEMORY
DISPLAY
Note
Some parameters and settings may appear dimmed
on the display. This means that they are either
unavailable or fixed and unchangeable.
V
B
B
3-7
Tip
v
You can display the amplifier menus on the TV
screen by setting the “OSD” in VIDEO menu to
“OSD ON”.
OPTIONS
TOOLS
RETURN/
MENU
EXIT
REPLAY ADVANCE
<
2
.
<
>
1 Press RECEIVER.
The RECEIVER indicator lights up and
receiver operation is activated.
2 Press MENU.
“1-LEVEL” appears on the display.
3 Press V/v repeatedly to select
the menu you want.
4 Press
or b to enter the
menu.
5 Press V/v repeatedly to select
the parameter you want to
adjust.
44GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview of the menus
The following options are available in each
menu. For details on navigating through
menus, see page 44.
Menu
[Display]
Parameters
[Display]
Settings
Initial
setting
LEVEL
[1-LEVEL]
(page 49)
Test tonea) [T. TONE]
Front speaker balancea)
[FRT BAL]
T. TONE Y, T. TONE N
T. TONE N
BALANCE
BAL. L +1 to BAL. L +10,
BALANCE, BAL. R +1 to
BAL. R +10
Center speaker level
[CNT LVL]
CNT –10 dB to CNT +10 dB
(1 dB step)
CNT 0 dB
SUR L 0 dB
SUR R 0 dB
SB 0 dB
Surround left speaker level
[SL LVL]
SUR L –10 dB to SUR L +10 dB
(1 dB step)
Surround right speaker level
[SR LVL]
Surround back speaker levelb) SB –10 dB to SB +10 dB
SUR R –10 dB to SUR R +10 dB
(1 dB step)
[SB LVL]
(1 dB step)
Surround back left speaker
levelc) [SBL LVL]
SBL –10 dB to SBL +10 dB
(1 dB step)
SBL 0 dB
SBR 0 dB
SW 0 dB
Surround back right speaker
levelc) [SBR LVL]
SBR –10 dB to SBR +10 dB
(1 dB step)
[SW LVL]
SW –10 dB to SW +10 dB
(1 dB step)
Dynamic range compressora)
[D. RANGE]
COMP. OFF, COMP. STD,
COMP. MAX
COMP. OFF
EQ
Equalizer on/offa) [EQ]
EQ OFF, EQ ON
EQ OFF
[2-EQ]
(page 50)
Front speakers bass level
[BASS LVL]
BASS –10 dB to BASS +10 dB
(0.5 dB step)
BASS 0 dB
Front speakers treble level
[TRE LVL]
TRE –10 dB to TRE +10 dB
(0.5 dB step)
TRE 0 dB
SUR
[3-SUR]
(page 50)
Sound field selectiona)
[S.F. SELCT]
2CH ST., A.F.D. AUTO, DOLBY
PL, PLII MV, PLII MS, PLII GM,
PLIIX MV, PLIIX MS, PLIIX GM, VIDEO 1, 2, 3,
A.F.D. AUTO
for:
NEO6 CIN, NEO6 MUS, MULTI
ST., C.ST.EX A, C.ST.EX B,
C.ST.EX C, PORTABLE, HALL,
JAZZ, CONCERT
DVD, SAT;
2CH ST. for:
TV, SA-CD/
CD, TUNER,
AUX,
DMPORT
Surround back decoding
modea) [SB DEC]
SB OFF, SB AUTO, SB ON
SB AUTO
Effect levela) [EFFECT]
EFCT. MIN, EFCT. STD,
EFCT. MAX
EFCT. STD
continued
45GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu
[Display]
Parameters
[Display]
Settings
Initial
setting
TUNER
[4-TUNER]
(page 52)
FM station receiving modea)
[FM MODE]
Naming preset stationsa)
[NAME IN]
FM AUTO, FM MONO
FM AUTO
AUDIO
[5-AUDIO]
(page 53)
Digital audio input decoding
prioritya) [DEC. PRI.]
DEC. AUTO, DEC. PCM
DEC. AUTO
for:
VIDEO 1, 2, 3,
DVD, SAT,
TV;
DEC. PCM for:
SA-CD/CD
Digital broadcast language
selectiona) [DUAL]
DUAL M/S, DUAL M, DUAL S,
DUAL M+S
DUAL M
Synchronizes audio with video A.V.SYNC. 0 to A.V.SYNC. 20
outputa) [A.V. SYNC.]
A.V.SYNC. 0
Digital audio input assignment For details, see page 72.
[D. ASSIGN]
Naming inputsa) [NAME IN]
VIDEO
[6-VIDEO]
(page 54)
On-Screen Display on/offa)
[OSD]
OSD ON, OSD OFF
OSD OFF
–NONE
DIGITAL MEDIA PORT video –NONE, –VIDEO 1, –VIDEO 2,
assigna)
–VIDEO 3, –DVD, –SAT
[DMPORT V.]
HDMI AUDIOa)d)
[AUDIO]
AMP, TV+AMP
AMP
HDMI CONTROLa)d)
[CONTROL]
Color TV type selectiona)g)
[COL SYS]
CTRL ON, CTRL OFF
COL NTSC, COL PAL
CTRL OFF
COL PAL
Naming inputsa) [NAME IN]
46GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu
[Display]
Parameters
[Display]
Settings
Initial
setting
SYSTEM
[7-SYSTEM]
(page 55)
Sub woofera)
[SW SPK]
Front speakersa)
[FRT SPK]
Center speakera)
[CNT SPK]
Surround speakersa)
[SUR SPK]
YES, NO
YES
LARGE, SMALL
LARGE, SMALL, NO
LARGE, SMALL, NO
DUAL, SINGLE, NO
LARGE
LARGE
LARGE
Surround back speakersa)
[SB SPK]
DUAL
Front left speaker distancea)e)
[FL DIST.]
Front right speaker distancea)e) DIST. 1.0 m to DIST. 7.0 m
[FR DIST.]
Center speaker distancea)e)
[CNT DIST.]
DIST. 1.0 m to DIST. 7.0 m
(0.1 m step)
DIST. 3.0 m
DIST. 3.0 m
DIST. 3.0 m
DIST. 3.0 m
(0.1 m step)
DIST. 1.0 m to DIST. 7.0 m
(0.1 m step)
Surround left speaker
distancea)e)
DIST. 1.0 m to DIST. 7.0 m
(0.1 m step)
[SL DIST.]
Surround right speaker
distancea)e)
[SR DIST.]
DIST. 1.0 m to DIST. 7.0 m
(0.1 m step)
DIST. 3.0 m
DIST. 3.0 m
DIST. 3.0 m
DIST. 3.0 m
Surround back speaker
distancea)b)e)
[SB DIST.]
DIST. 1.0 m to DIST. 7.0 m
(0.1 m step)
Surround back left speaker
distancea)c)e)
[SBL DIST.]
DIST. 1.0 m to DIST. 7.0 m
(0.1 m step)
Surround back right speaker
distancea)c)e)
DIST. 1.0 m to DIST. 7.0 m
(0.1 m step)
[SBR DIST.]
Sub woofer distancea)e)
[SW DIST.]
Surround speaker positiona)
[SUR POS.]
DIST. 1.0 m to DIST. 7.0 m
(0.1 m step)
DIST. 3.0 m
SIDE/LO
SIDE/LO, SIDE/HI, BEHD/LO,
BEHD/HI
Speaker crossover frequencya)f) CRS > 40 Hz to CRS > 160 Hz
CRS > 100 Hz
0% dim
[CRS. FREQ]
(10 Hz step)
Brightness of the displaya)
[DIMMER]
0% dim, 40% dim, 70% dim
continued
47GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Menu
[Display]
Parameters
[Display]
Settings
Initial
setting
A. CAL
[8-A. CAL]
(page 38)
Auto Calibration on/offa)
[AUTO CAL]
Calibration typea)
[CAL TYPE]
A.CAL YES, A.CAL NO
ENGINEER, FLAT, FRT REF
A.CAL NO
FLAT
Preset measurement loadinga) LOAD NO, LOAD YES
[CAL LOAD]
LOAD NO
a)For details, refer to the page in the parentheses.
b)You can only select this parameter when the surround back speakers are set to “SINGLE”.
c)You can only select this parameter when the surround back speakers are set to “DUAL”.
d)When you select this parameter, the “HDMI” flashes on the display.
e)When you set “CAL LOAD” in A. CAL menu to “LOAD YES”, the setting is displayed as x.xx m and you
can adjust the setting in 0.01 meter increment.
f) This parameter is only available when at least one speaker is set to “SMALL” and “CAL LOAD” is set to
“LOAD NO” in A. CAL menu.
g)Models of area code CEL, CEK, E2 only.
48GB
Download from Www.Somanuals.com. All Manuals Search And Download.
surround back speakers are set to “SINGLE” in
SYSTEM menu.
Adjusting the level
(LEVEL menu)
b)You can only select this parameter when the
surround back speakers are set to “DUAL” in
SYSTEM menu.
You can use the LEVEL menu to adjust the
balance and level of each speaker. These
settings are applied to all sound fields.
Select “1-LEVEL” in the amplifier menus. For
details on adjusting the parameters, see
“Navigating through menus” (page 44) and
“Overview of the menus” (page 45).
x D. RANGE (Dynamic range
Lets you compress the dynamic range of the
sound track. This may be useful when you
want to watch movies at low volumes late at
night. Dynamic range compression is possible
with Dolby Digital sources only.
• COMP. OFF
LEVEL menu parameters
The dynamic range is not compressed.
• COMP. STD
x T. TONE (Test tone)
Lets you adjust the speaker levels and balance
while listening to the test tone from your
listening position. For details, see “8:
Adjusting the speaker levels and balance
(TEST TONE)” (page 39).
The dynamic range is compressed as
intended by the recording engineer.
• COMP. MAX
The dynamic range is compressed
dramatically.
Tip
x FRT BAL (Front speaker
balance)
Lets you adjust the balance between front left
and right speakers.
Dynamic range compressor lets you compress the
dynamic range of the soundtrack based on the
dynamic range information included in the Dolby
Digital signal.
“COMP. STD” is the standard setting, but it only
enacts light compression. Therefore, we recommend
using the “COMP. MAX” setting. This greatly
compresses the dynamic range and lets you view
movies late at night at low volumes. Unlike analog
limiters, the levels are predetermined and provide a
very natural compression.
x CNT LVL (Center speaker level)
x SL LVL (Surround left speaker
level)
x SR LVL (Surround right speaker
level)
x SB LVL (Surround back speaker
a)
level)
x SBL LVL (Surround back left
b)
speaker level)
x SBR LVL (Surround back right
b)
speaker level)
x SW LVL (Sub woofer level)
49GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjusting the equalizer
sound
(EQ menu)
(SUR menu)
You can use the EQ menu to adjust the tonal
quality (bass/treble level) of the front
speakers.
Select “2-EQ” in the amplifier menus. For
details on adjusting the parameters, see
“Navigating through menus” (page 44) and
“Overview of the menus” (page 45).
You can use the SUR menu to select the sound
field you want for your listening pleasure.
details on adjusting the parameters, see
“Navigating through menus” (page 44) and
“Overview of the menus” (page 45).
EQ menu parameters
SUR menu parameters
x EQ (Equalizer on/off)
• EQ ON
The equalizer is turned on.
• EQ OFF
x S.F. SELCT (Sound field
selection)
Lets you select the sound field you want. For
details, see “Enjoying Surround Sound” (page
59).
The equalizer is turned off.
x BASS LVL (Front speakers bass
Note
level)*
The receiver lets you apply the last selected sound
field to an input whenever it is selected (Sound Field
Link). For example, if you select “HALL” for the
SA-CD/CD input, then change to a different input
and then return to SA-CD/CD, “HALL” will
automatically be applied again.
x TRE LVL (Front speakers treble
level)*
* You can also adjust the front speaker bass and
treble level with TONE MODE and TONE +/– on
the receiver (page 4).
x SB DEC (Surround back
decoding mode)
Lets you select the surround back decoding
mode. For details, see “Using the surround
back decoding mode” (page 51).
x EFFECT (Effect level)
Lets you adjust the “presence” of the surround
effect for sound fields selected with the
MOVIE or MUSIC button and for “HP
THEA” sound field.
• EFCT. MIN
The surround effect is minimum.
• EFCT. STD
The surround effect is standard.
• EFCT. MAX
The surround effect is maximum.
50GB
Download from Www.Somanuals.com. All Manuals Search And Download.
x SB ON
Using the surround back
decoding mode
To decode the surround back signal regardless
a)
of the 6.1 channel decode flag , Dolby Digital
EX is applied when the output channel is 6.1
channel.
(SUR BACK DECODING)
By decoding the surround back signal of DVD
software (etc.) recorded in Dolby Digital
Surround EX, DTS-ES Matrix, DTS-ES
Discrete 6.1, etc., format, you can enjoy the
surround sound intended by the filmmakers.
Select the surround back decoding mode using
“SB DEC” in the SUR menu (page 45).
You can also use SUR BACK DECODING on
the receiver.
Input stream Output Surround back
channel decoding
Dolby Digital
5.1
6.1e)
6.1e)
6.1e)
6.1e)
6.1e)
7.1
Matrix decoder that
conforms to Dolby
Digital EX
Dolby Digital
Surround EXb)
Matrix decoder that
conforms to Dolby
Digital EX
DTS 5.1
Matrix decoder that
conforms to Dolby
Digital EX
Types of the surround back
decoding functions
DTS-ES
Matrix decoder that
conforms to Dolby
Digital EX
Matrix 6.1c)
x SB AUTO
DTS-ES
Matrix decoder that
conforms to Dolby
Digital EX
When the input stream contains the 6.1
Discrete 6.1d)
a)
channel decode flag , the appropriate
decoding is performed on the surround back
signal.
Dolby Digital
5.1
Matrix decoder that
conforms to Dolby
Pro Logic IIx
Input stream Output Surround back
channel decoding
Dolby Digital
Surround EXb)
7.1
Matrix decoder that
conforms to Dolby
Pro Logic IIx
Dolby Digital
5.1
5.1e)
—
6.1e)
Matrix decoder that
conforms to Dolby
Digital EX
DTS 5.1
7.1
Matrix decoder that
conforms to Dolby
Digital EX
Dolby Digital
Surround EXb)
DTS-ES
7.1
Matrix decoder that
conforms to Dolby
Digital EX
DTS 5.1
5.1e)
6.1e)
—
Matrix 6.1c)
DTS-ES
DTS Matrix decoding
Matrix 6.1c)
DTS-ES
7.1
Matrix decoder that
conforms to Dolby
Digital EX
Discrete 6.1d)
DTS-ES
6.1e)
7.1
DTS Discrete
decoding
Discrete 6.1d)
Dolby Digital
Surround EXb)
Matrix decoder that
conforms to Dolby
Pro Logic IIx
x SB OFF
Surround back decoding is not performed.
DTS-ES Matrix 7.1
6.1c)
DTS Matrix decoding
DTS-ES
7.1
DTS Discrete
decoding
Discrete 6.1d)
continued
51GB
Download from Www.Somanuals.com. All Manuals Search And Download.
a)A 6.1 channel decode flag is information recorded
in software such as DVDs.
Settings for the tuner
(TUNER menu)
b)A Dolby Digital DVD that includes a Surround EX
flag. The Dolby Corporation web page can help
you distinguish Surround EX films.
c)Software encoded with a flag to denote it has both
DTS-ES Matrix and 5.1 channel signals.
d)Software encoded with both 5.1 channel signals
and an extension stream designed for returning
those signals to 6.1 discrete channels. Discrete 6.1
channel signals are DVD specific signals not used
in movie theaters.
You can use the TUNER menu to set the FM
station receiving mode and to name preset
stations.
Select “4-TUNER” in the amplifier menus.
For details on adjusting the parameters, see
“Navigating through menus” (page 44) and
“Overview of the menus” (page 45).
e)When two surround back speakers are connected,
the output channel will be 7.1 channel.
Notes
TUNER menu parameters
• There may be no sound from the surround back
speaker in Dolby Digital EX mode. Some discs
have no Dolby Digital Surround EX flag even
though the packages have Dolby Digital EX logos.
In this case, select “SB ON”.
• You can select the surround back decoding mode
only when A.F.D. mode is selected. However, this
function is canceled when Dolby Pro Logic IIx is
selected.
x FM MODE (FM station receiving
mode)
• FM AUTO
signal when the radio station is broadcast in
stereo.
• FM MONO
This receiver will decode the signal as mono
signal regardless of the broadcast signal.
x NAME IN (Naming preset
stations)
Lets you set the name of preset stations. For
details, see “Naming preset stations” (page
68).
52GB
Download from Www.Somanuals.com. All Manuals Search And Download.
x DUAL (Digital broadcast
language selection)
Lets you select the language you want to listen
to during digital broadcast. This feature only
functions for Dolby Digital sources.
• DUAL M/S (Main/Sub)
Sound of the main language will be output
through the front left speaker and sound of
the sub language will be output through the
front right speaker simultaneously.
• DUAL M (Main)
Settings for the audio
(AUDIO menu)
You can use the AUDIO menu to make
settings for the audio to suit your preference.
Select “5-AUDIO” in the amplifier menus. For
details on adjusting the parameters, see
“Navigating through menus” (page 44) and
“Overview of the menus” (page 45).
Sound of the main language will be output.
• DUAL S (Sub)
Sound of the sub language will be output.
• DUAL M+S (Main + Sub)
Mixed sound of both the main and sub
languages will be output.
AUDIO menu parameters
x DEC. PRI. (Digital audio input
decoding priority)
Lets you specify the input mode for the digital
signal input to the DIGITAL IN and HDMI IN
jacks.
x A.V. SYNC. (Synchronizes audio
with video output)
Lets you delay the output of audio to minimize
the time gap between audio output and visual
display. You can adjust from 0 (0 ms) to 20
(200 ms) in 1 (10 ms) steps.
• DEC. AUTO
Automatically switches the input mode
between DTS, Dolby Digital, or PCM.
• DEC. PCM
PCM signals are given priority (to prevent
interruption when playback starts).
However, when other signals are input, there
may be no sound depending on the format.
In this case, set to “DEC. AUTO”.
When signals from the HDMI IN jack are
selected, only PCM signals are output from
the connected component. When signals
other than PCM signals are received, set this
item to “DEC. AUTO”.
Notes
• This parameter is useful when you use a large LCD
or plasma monitor or a projector.
• This parameter is not valid when
– the multi channel PCM signals are received via a
HDMI IN jack.
– ANALOG DIRECT is selected.
x D. ASSIGN (Digital audio input
assignment)
Lets you assign the digital audio input to other
input source. For details, see “Listening to
digital sound from other inputs (DIGITAL
ASSIGN)” (page 72).
Note
When set to “DEC. AUTO” and the sound from the
digital audio jacks (for a CD, etc.) is interrupted
when playback starts, set to “DEC. PCM”.
x NAME IN (Naming inputs)
Lets you set the name of inputs. For details,
see “Naming inputs” (page 76).
53GB
Download from Www.Somanuals.com. All Manuals Search And Download.
a)
Lets you set the HDMI audio output from the
playback component connected to the receiver
via a HDMI connection.
Settings for the video
(VIDEO menu)
• AMP
The HDMI audio signals from the playback
component is only output to the speakers
connected to the receiver. Multi channel
sound can be played back as it is.
You can use the VIDEO menu to make various
adjustments for HDMI settings, assign the
composite video input to DMPORT input, etc.
Select “6-VIDEO” in the amplifier menus. For
details on adjusting the parameters, see
“Navigating through menus” (page 44) and
“Overview of the menus” (page 45).
Note
Sound is not output from the TV’s speakers.
• TV+AMP
The sound is output from TV’s speaker and
the speakers connected to the receiver.
Notes
VIDEO menu parameters
x OSD (On-Screen Display on/off)
Lets you view the amplifier menus on the TV
screen and you can adjust the settings easily.
• OSD ON
The on-screen display is turned on so that
the amplifier menus are displayed on the TV
screen.
• The sound quality of the playback component
depends on the TV’s sound quality, such as the
number of channels, and the sampling
frequency, etc. When the TV has stereo
speakers, the sound output from the receiver is
also stereo as that of the TV, even if you play
back multi channel software.
• When you connect the receiver to an image
display component (projector, etc.), sound may
not be output from the receiver. In this case,
• OSD OFF
The on-screen display is turned off.
Note
The on-screen display is not output from the
COMPONENT VIDEO MONITOR OUT jack of
the receiver. Be sure to connect the HDMI OUT or
MONITOR VIDEO OUT jack to your TV.
a)
x CONTROL (HDMI CONTROL)
Lets you turn the HDMI CONTROL function
on or off. For details, refer to the “HDMI
CONTROL Guide” supplied with the receiver.
x DMPORT V. (DIGITAL MEDIA
PORT video assign)
x COL SYS (Color TV type
b)
Lets you assign the composite video input to
DMPORT input so that you can view the
images on the TV screen. For details, see
“Watching a connected component through
DMPORT connection” (page 75).
selection)
• COL NTSC
• COL PAL
x NAME IN (Naming inputs)
Lets you set the name of inputs. For details,
see “Naming inputs” (page 76).
a)When you select this parameter, the “HDMI”
flashes on the display.
b)Models of area code CEL, CEK, E2 only.
54GB
Download from Www.Somanuals.com. All Manuals Search And Download.
• LARGE
Settings for the system
If you connect a large speaker that will
effectively reproduce bass frequencies,
select “LARGE”. Normally, select
“LARGE”. However, if the front speakers
are set to “SMALL”, you cannot set the
center speaker to “LARGE”.
(SYSTEM menu)
You can use the SYSTEM menu to set the size
and distance of the speakers connected to this
receiver.
Select “7-SYSTEM” in the amplifier menus.
For details on adjusting the parameters, see
“Navigating through menus” (page 44) and
“Overview of the menus” (page 45).
• SMALL
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select “SMALL” to activate
the bass redirection circuitry and output the
center channel bass frequencies from the
front speakers (if set to “LARGE”) or sub
woofer.
SYSTEM menu parameters
x SW SPK (Sub woofer)
• YES
• NO
If you have connected a sub woofer, select
“YES”.
• NO
If you have not connected a sub woofer,
select “NO”. This activates the bass
redirection circuitry and outputs the LFE
signals from other speakers.
If you have not connected a center speaker,
select “NO”. The sound of the center
channel will be output from the front
speakers.
x SUR SPK (Surround speakers)
The surround back speakers will be set to the
same setting.
Tip
• LARGE
In order to take full advantage of the Dolby Digital
bass redirection circuitry, we recommend setting the
sub woofer’s cut off frequency as high as possible.
If you connect large speakers that will
effectively reproduce bass frequencies,
select “LARGE”. Normally, select
“LARGE”. However, if the front speakers
are set to “SMALL”, you cannot set the
surround speakers to “LARGE”.
• SMALL
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select “SMALL” to activate
the bass redirection circuitry and output the
surround channel bass frequencies from the
sub woofer or other speaker that is set to
“LARGE”.
x FRT SPK (Front speakers)
• LARGE
If you connect large speakers that will
effectively reproduce bass frequencies,
select “LARGE”. Normally, select
“LARGE”. When the sub woofer is set to
“NO”, the front speakers are automatically
set to “LARGE”.
• SMALL
If the sound is distorted, or you feel a lack of
surround effects when using multi channel
surround sound, select “SMALL” to activate
the bass redirection circuitry and output the
front channel bass frequencies from the sub
woofer. When the front speakers are set to
“SMALL”, the center and surround speakers
are also automatically set to “SMALL”
(unless previously set to “NO”).
• NO
If you have not connected surround
speakers, select “NO”.
continued
55GB
Download from Www.Somanuals.com. All Manuals Search And Download.
x SB SPK (Surround back
speakers)
With only one surround back
speaker
When the surround speakers are set to “NO”,
the surround back speakers are also
automatically set to “NO” and the setting
cannot be changed.
• DUAL
If you connect two surround back speakers,
select “DUAL”. The sound will be output to
a maximum of 7.1 channel.
• SINGLE
If you connect only one surround back
speaker, select “SINGLE”. The sound will
be output to a maximum of 6.1 channel.
• NO
If you have not connected a surround back
speaker, select “NO”.
With two surround back speakers
(The angle B should be the same)
Tip
The “LARGE” and “SMALL” settings for each
speaker determine whether the internal sound
processor will cut the bass signal from that channel.
When the bass is cut from a channel, the bass
redirection circuitry sends the corresponding bass
frequencies to the sub woofer or other “LARGE”
speakers.
However, since bass sounds have a certain amount
of directionality, it is best not to cut them, if
possible. Therefore, even when using small
speakers, you can set them to “LARGE” if you want
to output the bass frequencies from that speaker. On
the other hand, if you are using a large speaker, but
prefer not to have bass frequencies output from that
speaker, set it to “SMALL”.
If the overall sound level is lower than you prefer,
set all speakers to “LARGE”. If there is not enough
bass, you can use the equalizer to boost the bass
levels. For details, see page 45.
x CNT DIST. (Center speaker
distance)
Lets you set the distance from your listening
position to the center speaker.
x SL DIST. (Surround left speaker
distance)
x SR DIST. (Surround right
speaker distance)
Lets you set the distance from your listening
position to the surround speakers.
If both surround speakers are not placed an
equal distance from your listening position, set
to the distance to the closest speaker.
x FL DIST. (Front left speaker
distance)
x FR DIST. (Front right speaker
distance)
Lets you set the distance from your listening
position to the front speakers (A).
If both front speakers are not placed an equal
distance from your listening position, set the
distance to the closest speaker.
56GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips
x SB DIST. (Surround back
a)
• If you set “CAL LOAD” in A. CAL menu to
“LOAD YES”, you can adjust the speakers
distance in 0.01 meter increment.
• The distance between the center speaker and the
listening position B cannot be more than 1.5
meters closer than the one between the listening
position and the front speaker A. Place the
speakers so that the difference in the length of B
in the following diagram is no more than 1.5
meters closer than the length of A.
Example: Adjust the distance B to 4.5 meters or
more when the distance A is 6 meters.
Also, the distance between the surround speakers/
surround back speakers and the listening position
C cannot be more than 4.5 meters closer than the
distance between the listening position and the
front speakers A. Place the speakers so that the
difference in the length of C in the following
diagram is no more than 4.5 meters closer than the
length of A.
Example: Adjust the distance C to 1.5 meters or
more when the distance A is 6 meters.
This is important because incorrect speaker
placement is not conductive to the enjoyment of
surround sound. Please note that placing the
speakers closer than the required will cause a delay
in the output of the sound from that speaker. In
other words, the speaker will sound like it is
farther away.
speaker distance)
x SBL DIST. (Surround back left
b)
speaker distance)
x SBR DIST. (Surround back right
b)
speaker distance)
Lets you set the distance from your listening
position to the surround back speakers.
If you connect two surround back speakers and
both surround back speakers are not placed an
equal distance from your listening position, set
the distance to the closest speaker.
a)You can only select this parameter when the
surround back speakers are set to “SINGLE” in
SYSTEM menu.
b)You can only select this parameter when the
surround back speakers are set to “DUAL” in
SYSTEM menu.
x SW DIST. (Sub woofer distance)
Lets you set the distance from your listening
position to the sub woofer.
continued
57GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Tip
x SUR POS.
Surround speaker position is designed specifically
for implementation of the CINEMA STUDIO EX
modes. For other sound fields, speaker position is
not so critical.
Those sound fields were designed under the premise
that the surround speakers would be located behind
the listening position, but presentation remains
fairly consistent even with the surround speakers
positioned at a rather wide angle. However, if the
speakers are pointing toward the listener from the
immediate left and right of the listening position, the
surround effects become unclear unless set to
“SIDE/LO” or “SIDE/HI”.
(Surround speaker position)
Lets you specify the location of your surround
speakers for proper implementation of the
surround effects in the CINEMA STUDIO EX
modes (page 62). This parameter is not
available when the surround speakers are set to
“NO” (page 47).
Nevertheless, each listening environment has many
variables, such as wall reflections, and you may
obtain better results using “BEHD/HI” if your
speakers are located high above the listening
position, even if they are located to the immediate
left and right.
Therefore, although it may result in a setting
contrary to the above explanation, we recommend
that you play back multi channel surround encoded
software and select the setting that provides a good
sense of spaciousness and that best succeeds in
forming a cohesive space between the surround
sound from the surround speakers and the sound of
the front speakers. If you are not sure which sounds
best, select “BEHD/LO” or “BEHD/HI” and then
use the speaker distance parameter and speaker level
adjustments to obtain proper balance.
x CRS. FREQ (Speaker crossover
frequency)
Lets you set the bass crossover frequency of
the speakers that have been set to “SMALL” in
the SYSTEM menu. This parameter is only
available when at least one speaker is set to
“SMALL”.
• SIDE/LO
Select if the location of your surround
speakers corresponds to sections A and C.
• SIDE/HI
Select if the location of your surround
speakers corresponds to sections A and D.
• BEHD/LO
Note
This parameter is not available when “CAL LOAD”
is set to “LOAD YES” in A. CAL menu. In this case,
set to “LOAD NO”.
Select if the location of your surround
speakers corresponds to sections B and C.
• BEHD/HI
Select if the location of your surround
speakers corresponds to sections B and D.
x DIMMER (Brightness of the
display)
Lets you adjust the brightness in 3 steps.
You can also use DIMMER on the receiver.
58GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Enjoying Surround Sound
Enjoying Dolby Digital
and DTS surround sound
(AUTO FORMAT DIRECT)
The Auto Format Direct (A.F.D.) mode allows
you to listen to higher fidelity sound and select
the decoding mode for listening to a 2 channel
AUX
2CH
DMPORT
A.F.D.
RECEIVER
MUSIC
MOVIE
A.F.D.
SLEEP FM MODE D.TUNING AUTO CAL
Press A.F.D. repeatedly to select
the sound field you want.
For details, see “Types of A.F.D. mode” (page
60).
continued
59GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Types of A.F.D. mode
Decoding
mode
A.F.D. mode
[Display]
Multi channel
audio after
decoding
Effect
(Detecting
automatically) [A.F.D. AUTO]
A.F.D. AUTO
(Detecting
automatically)
Presents the sound as it was recorded/
encoded without adding any surround
effects. However, this receiver will
generate a low frequency signal for output
to the sub woofer when there is no LFE
signals.
Dolby Pro Logic PRO LOGIC
[DOLBY PL]
4 channel
Performs Dolby Pro Logic decoding. The
source recorded in 2 channel format is
decoded into 4.1 channel.
Dolby Pro Logic PRO LOGIC II MOVIE 5 channel
Performs Dolby Pro Logic II Movie mode
decoding. This setting is ideal for movies
encoded in Dolby Surround. In addition,
this mode can reproduce sound in 5.1
channel for watching videos of overdubbed
or old movies.
II
[PLII MV]
PRO LOGIC II MUSIC 5 channel
[PLII MS]
Performs Dolby Pro Logic II Music mode
decoding. This setting is ideal for normal
stereo sources such as CDs.
PRO LOGIC II GAME 5 channel
[PLII GM]
Performs Dolby Pro Logic II Game mode
decoding. This setting is ideal for game
softwares.
Dolby Pro Logic PRO LOGIC IIx MOVIE 7 channel
Performs Dolby Pro Logic IIx Movie mode
decoding. This setting expands Dolby Pro
Logic II Movie or Dolby Digital 5.1 to
discrete 7.1 movie channels.
IIx
[PLIIX MV]
PRO LOGIC IIx MUSIC 7 channel
[PLIIX MS]
Performs Dolby Pro Logic IIx Music mode
decoding. This setting is ideal for normal
stereo sources such as CDs.
PRO LOGIC IIx GAME 7 channel
[PLIIX GM]
Performs Dolby Pro Logic IIx Game mode
decoding.
Neo:6
Neo:6 Cinema
[NEO6 CIN]
6 channel
Performs DTS Neo:6 Cinema mode
decoding.
Neo:6 Music
[NEO6 MUS]
6 channel
Performs DTS Neo:6 Music mode
decoding. This setting is ideal for normal
stereo sources such as CDs.
(Multi Stereo) MULTI STEREO
[MULTI ST.]
(Multi Stereo)
Outputs 2 channel left/right signals from
all speakers. However, sound may not be
output from certain speakers depending on
the speaker settings.
60GB
Download from Www.Somanuals.com. All Manuals Search And Download.
If you connect a sub woofer
This receiver will generate a low frequency
signal for output to the sub woofer when there
is no LFE signal, which is a low-pass sound
effect output from a sub woofer to a 2 channel
signal. However, the low frequency signal is
not generated for “NEO6 CIN” or “NEO6
MUS” when all speakers are set to “LARGE”.
Selecting a pre-
programmed sound field
You can take advantage of surround sound
simply by selecting one of the receiver’s pre-
programmed sound fields. They bring the
exciting and powerful sound of movie theaters
and concert halls into your home.
Notes
• This function does not work when ANALOG
DIRECT is selected.
SAT
AUX
2CH
TV
SA-CD/CD TUNER
RECEIVER
• DTS Neo:6 does not work for DTS 2CH audio, the
sound is played as 2 channel.
• Dolby Pro Logic IIx decoding does not function for
signals with a sampling frequency of more than 48
kHz.
DMPORT
A.F.D.
MOVIE
MUSIC
2CH
MOVIE
SLEEP FM MODE D.TUNING AUTO CAL
A.F.D.
Tip
1
2
3
When a multi channel signal is input, only Dolby
Pro Logic IIx decoding is effective. When you select
decoding modes other than Dolby Pro Logic IIx,
multi channel sound (being encoded) is output.
Press MOVIE repeatedly to select a
sound field for movies or press
MUSIC repeatedly to select a sound
field for music.
For details, see “Types of sound field
available” (page 62).
continued
61GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Types of sound field available
Sound field
for
Sound field
[Display]
Effect
Movie
CINEMA STUDIO EX A
DCS [C.ST.EX A]
Reproduces the sound characteristics of the Sony Pictures
Entertainment “Cary Grant Theater” cinema production
studio. This is a standard mode, great for watching almost any
type of movie.
CINEMA STUDIO EX B
DCS [C.ST.EX B]
Reproduces the sound characteristics of the Sony Pictures
Entertainment “Kim Novak Theater” cinema production
studio. This mode is ideal for watching science-fiction or
action movies with lots of sound effects.
CINEMA STUDIO EX C
DCS [C.ST.EX C]
Reproduces the sound characteristics of the Sony Pictures
Entertainment scoring stage. This mode is ideal for watching
musicals or films where orchestra music is featured in the
soundtrack.
Music
PORTABLE AUDIO
[PORTABLE]
Reproduces a clear enhanced sound image from your portable
audio device. This mode is ideal for MP3 and other
compressed music.
HALL [HALL]
Reproduces the acoustics of a classical concert hall.
Reproduces the acoustics of a jazz club.
JAZZ CLUB [JAZZ]
LIVE CONCERT
[CONCERT]
Reproduces the acoustics of a 300-seat live house.
Headphone*
HEADPHONE 2CH
[HP 2CH]
This mode is selected automatically if you use headphones
when 2CH STEREO mode (page 64)/A.F.D. mode (page 60)
is selected. Standard 2 channel stereo sources completely
bypass the sound field processing and multi channel surround
formats are downmixed to 2 channels.
HEADPHONE THEATER This mode is selected automatically if you use headphones
DCS [HP THEA]
when sound field for movie/music is selected. It allows you to
experience a theater-like environment while listening through
a pair of headphones.
HEADPHONE DIRECT
[HP DIR]
Outputs the analog signals without processing by the
equalizer, sound field, etc.
* You can only select this sound field if the headphones are connected to the receiver.
62GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
About DCS (Digital Cinema
Sound)
• The effects provided by the virtual speakers may
cause increased noise in the playback signal.
• When listening with sound fields that employ the
virtual speakers, you will not be able to hear any
sound coming directly from the surround speakers.
• This function does not work in the following cases:
– ANALOG DIRECT is selected.
– For signals with a sampling frequency of more
than 48 kHz.
– The multi channel PCM signals are received via
a HDMI IN jack.
• The surround back decoding mode does not
function when a sound field for movie or music is
selected (page 51).
• When one of the following sound fields is selected,
no sound is output from the sub woofer if all the
speakers are set to “LARGE” in the SYSTEM
menu. However, the sound will be output from the
sub woofer if the digital input signal contains LFE
signals, or if the front or surround speakers are set
to “SMALL”.
Sound fields with DCS mark use DCS
technology.
DCS is a unique sound reproduction
technology for home theater developed by
Sony, in cooperation with Sony Pictures
Entertainment, for enjoying the exciting and
powerful sound of movie theaters at home.
With this “Digital Cinema Sound” developed
by integrating a DSP (Digital signal processor)
and measured data, the ideal sound field
intended by film makers can be experienced at
home.
About CINEMA STUDIO EX
modes
CINEMA STUDIO EX modes are suitable for
watching motion picture DVDs (etc.), with
multi channel surround effects. You can
reproduce the sound characteristics of Sony
Pictures Entertainment’s dubbing studio in
your home.
– HALL
– JAZZ CLUB
– LIVE CONCERT
Tip
The CINEMA STUDIO EX modes consist of
the following three elements.
• Virtual Multi Dimension
Creates 5 sets of virtual speakers from a
single pair of actual surround speakers.
• Screen Depth Matching
You can identify the encoding format of DVD
software, etc., by looking at the logo on the package.
•
•
: Dolby Digital discs
: Dolby Surround
encoded programs
: DTS Digital Surround encoded
•
Creates the sensation that the sound is
coming from inside the screen like in
theaters.
• Cinema Studio Reverberation
Reproduces the type of reverberation found
in theaters.
programs
To turn off the surround effect
for movie/music
Press 2CH to select “2CH ST.” or press A.F.D.
repeatedly to select “A.F.D. AUTO”.
The CINEMA STUDIO EX modes integrate
these three elements simultaneously.
63GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Using only the front
speakers
Listening to the sound
without any adjustment
(ANALOG DIRECT)
(2CH STEREO)
In this mode, the receiver outputs the sound
from the front left/right speakers only. There is
no sound from the sub woofer.
Standard 2 channel stereo sources completely
bypass the sound field processing and multi
channel surround formats are downmixed to 2
channel.
You can switch the audio of the selected input
to 2 channel analog input. This function
enables you to enjoy high quality analog
sources.
When using this function, only the volume and
front speaker balance can be adjusted.
?/1
MASTER VOLUME
MULTI CHANNEL DECODING
AUX
2CH
DMPORT
A.F.D.
RECEIVER
MUSIC
TONE MODE
TONE
TUNING MODE
TUNING
DISPLAY
INPUT MODE
INPUT SELECTOR
SPEAKERS
(OFF/A/B/A+B)
MOVIE
AUTO CAL MIC
PHONES
2CH
MEMORY/
ENTER
SUR BACK
DECODING
DIMMER
SLEEP
2CH
A.F.D.
MOVIE
MUSIC
AUTO CAL
DIRECT
VIDEO
3
IN/PORTABLE AV IN
SLEEP FM MODE D.TUNING AUTO CAL
VIDEO
L
AUDIO
R
Sound field
buttons
2
1
Press 2CH.
Note
1 Turn INPUT SELECTOR on the
receiver to select the input you
want to listen to in analog
audio.
No sound is output from the sub woofer in the 2CH
STEREO mode. To listen to 2 channel stereo
sources using the front left/right speakers and a sub
woofer, select “A.F.D. AUTO” (page 60).
You can also use the input buttons on the
remote.
2 Press DIRECT on the receiver.
“A. DIRECT” appears on the display.
The analog audio is output.
To cancel ANALOG DIRECT
Press DIRECT on the receiver again.
You can also press any sound field buttons.
Notes
• When headphones are connected, “HP DIR”
appears on the display.
• This function is not available when DMPORT
input is selected.
64GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Resetting sound fields to
the initial settings
Be sure to use the buttons on the receiver for
this operation.
Tuner Operations
Listening to FM/AM radio
You can listen to FM and AM broadcasts
through the built-in tuner. Before operation,
make sure you have connected the FM and
AM antennas to the receiver (page 30).
1,2
?/1
MASTER VOLUME
Tip
MULTI CHANNEL DECODING
TONE MODE
TUNING MODE
TUNING
DISPLA
Y
INPUT MODE
TONE
INPUT SELECTOR
The tuning scale for direct tuning differs depending
on the area code as shown in the following table. For
details on area codes, see page 2.
SPEAKERS
(OFF/A/B/A+B)
AUTO CAL MIC
PHONES
MEMORY/
ENTER
SUR BACK
DECODING
DIMMER
SLEEP
2CH
A.F.D.
MOVIE
MUSIC
AUTO CAL
DIRECT
VIDEO
3
IN/PORTABLE AV IN
VIDEO
L
AUDIO
R
Area
FM
AM
CEL, CEK, TW, KR
E2
50 kHz
50 kHz
9 kHz
9 kHz*
2
1 Press ?/1 to turn off the
* The AM tuning scale can be changed (page 91).
receiver.
2 While holding down 2CH, press
Automatic tuning
?/1.
“S.F. CLR.” appears on the display and
all sound fields are reset to their initial
setting.
SAT
AUX
2CH
TV
SA-CD/CD TUNER
RECEIVER
1
DMPORT
A.F.D.
MOVIE
MUSIC
SLEEP FM MODE D.TUNING AUTO CAL
FM
MODE
1
4
7
2
5
3
6
9
8
- --
/
CLEAR
ENTER
0/10
>10
GUIDE
MEMORY
DISPLAY
V
B
B
v
OPTIONS
TOOLS
RETURN/
MENU
EXIT
REPLAY ADVANCE
.
<
>
<
+
TUNING –
TUNING
m
M
H
2
DISC SKIP
X
x
continued
65GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Direct tuning
1 Press TUNER repeatedly to
select the FM or AM band.
You can enter the frequency of a station
directly by using the numeric buttons.
2 Press TUNING + or TUNING –.
SAT
AUX
2CH
TV
SA-CD/CD TUNER
Press TUNING + to scan from low to
high; press TUNING – to scan from high
to low.
1
2
DMPORT
A.F.D.
RECEIVER
MOVIE
MUSIC
The receiver stops scanning whenever a
station is received.
SLEEP FM MODE D.TUNING AUTO CAL
1
4
7
2
5
3
6
9
Using the controls on the
receiver
1 Turn INPUT SELECTOR to select the FM
or AM band.
2 Press TUNING MODE repeatedly to select
“AUTO T.”.
3
8
- --
/
CLEAR
ENTER
0/10
4
>10
MEMORY
3 Turn TUNING +/–.
1 Press TUNER repeatedly to
select the FM or AM band.
In case of poor FM stereo
reception
You can also use INPUT SELECTOR on
the receiver.
If the FM stereo reception is poor and “ST”
flashes on the display, select monaural audio
so that the sound will be less distorted.
• To select monaural audio, you can
– press FM MODE repeatedly until the
“MONO” indicator lights up on the
display.
– set “FM MODE” in TUNER menu to “FM
MONO” (page 52).
• To return to stereo mode, you can
– press FM MODE repeatedly until the
“MONO” indicator on the display do not
light up.
2 Press D.TUNING.
3 Press the numeric buttons to
enter the frequency.
Example 1: FM 102.50 MHz
Select 1 b 0 b 2 b 5 b 0
Example 2: AM 1,350 kHz
Select 1 b 3 b 5 b 0
4 Press ENTER.
You can also use MEMORY/ENTER on
the receiver.
– set “FM MODE” in TUNER menu to “FM
AUTO” (page 52).
Tip
If you have tuned in an AM station, adjust the
direction of the AM loop antenna for optimum
reception.
If you cannot tune in a station
Make sure you have entered the right
frequency. If not, repeat steps 2 to 4. If you
still cannot tune in a station, the frequency is
not used in your area.
66GB
Download from Www.Somanuals.com. All Manuals Search And Download.
3 Press MEMORY.
Presetting radio stations
You can preset up to 30 FM stations and 30
AM stations. Then you can easily tune in the
stations you often listen to.
You can also use MEMORY/ENTER on
the receiver.
“MEMORY” lights up for a few seconds.
Perform steps 4 and 5 before
“MEMORY” goes out.
4 Press the numeric buttons to
Presetting radio stations
select a preset number.
You can also press PRESET + or
PRESET – to select a preset number.
If “MEMORY” goes out before you
select the preset number, start again from
step 3.
SAT
AUX
2CH
TV
SA-CD/CD TUNER
1
DMPORT
A.F.D.
RECEIVER
MOVIE
MUSIC
SLEEP FM MODE D.TUNING AUTO CAL
5 Press ENTER.
1
4
7
2
5
3
6
9
You can also use MEMORY/ENTER on
the receiver.
4
8
The station is stored as the selected preset
number.
If “MEMORY” goes out before you
press ENTER, start again from step 3.
- --
/
CLEAR
ENTER
0/10
>10
GUIDE
MEMORY
DISPLAY
3,5
V
6 Repeat steps 1 to 5 to preset
B
B
another station.
v
OPTIONS
TOOLS
RETURN/
MENU
EXIT
REPLAY ADVANCE
.
<
>
<
+
TUNING –
TUNING
m
M
H
DISC SKIP
X
x
TV VOL
TV CH
MASTER VOL PRESET
MUTING
PRESET
DVD
select the FM or AM band.
You can also use INPUT SELECTOR on
the receiver.
2 Tune in the station that you
want to preset using Automatic
Tuning (page 65) or Direct
Tuning (page 66).
Switch the FM reception mode, if
necessary (page 66).
67GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the controls on the
receiver
Tuning to preset stations
1 Turn INPUT SELECTOR to select the FM
or AM band.
SAT
AUX
2CH
TV
SA-CD/CD TUNER
RECEIVER
1
2 Press TUNING MODE repeatedly to select
“PRESET T.”.
DMPORT
A.F.D.
MOVIE
MUSIC
3 Turn TUNING +/– to select the preset
station you want.
SLEEP FM MODE D.TUNING AUTO CAL
1
4
7
2
5
3
6
9
Numeric
buttons
Naming preset stations
8
SAT
AUX
2CH
TV
SA-CD/CD TUNER
RECEIVER
- --
/
1
3
CLEAR
ENTER
0/10
ENTER
DMPORT
A.F.D.
>10
GUIDE
MEMORY
DISPLAY
MOVIE
MUSIC
V
SLEEP FM MODE D.TUNING AUTO CAL
B
B
1
4
7
2
5
3
6
9
v
OPTIONS
TOOLS
RETURN/
MENU
EXIT
REPLAY ADVANCE
8
.
<
>
<
- --
/
+
TUNING –
TUNING
CLEAR
ENTER
0/10
m
M
H
>10
GUIDE
MEMORY
DISPLAY
DISC SKIP
X
x
V
TV VOL
TV CH
MASTER VOL PRESET
B
B
MUTING
5-8
2
v
DVD
TOOLS
RETURN/
MENU
EXIT
4
REPLAY ADVANCE
.
<
>
<
1 Press TUNER repeatedly to
select the FM or AM band.
1 Press TUNER repeatedly to
select the FM or AM band.
2 Press PRESET + or PRESET –
repeatedly to select the preset
station you want.
You can also use INPUT SELECTOR on
the receiver.
Each time you press the button, you can
select a preset station as follows:
2 Tune in the preset station you
want to create an index name
for (page 68).
01
02
03
30
04
29
05
28
...
27
3 Press RECEIVER.
The RECEIVER indicator lights up and
receiver operation is activated.
You can also press the numeric buttons to
select the preset station you want. Then,
press ENTER to enter the selection.
4 Press MENU.
“1-LEVEL” appears on the display.
68GB
Download from Www.Somanuals.com. All Manuals Search And Download.
5 Press V/v repeatedly to select
Using the Radio Data
System (RDS)
“4-TUNER”.
6 Press
or b to enter the
menu.
(Models of area code CEL, CEK
only)
This receiver also allows you to use RDS
(Radio Data System), which enables radio
stations to send additional information along
with the regular program signal. You can
display RDS information.
7 Press V/v repeatedly to select
“NAME IN”.
8 Press
or b to enter the
parameter.
The cursor flashes and you can select a
character. Follow the procedure given in
“To create an index name” below.
Notes
• RDS is operable only for FM stations.
• Not all FM stations provide RDS service, nor do
they provide the same type of services. If you are
not familiar with the RDS services in your area,
check with your local radio stations for details.
To create an index name
1 Use V/v/B/b to create an index name.
Press V/v to select a character, then press
B/b to move the cursor to the next position.
Receiving RDS broadcasts
If you made a mistake
Press B/b until the character you want to
change flashes, then press V/v to select the
correct character.
Simply select a station on the FM
band using Direct Tuning (page 66),
Automatic Tuning (page 65), or
Preset Tuning (page 67).
Tips
• You can select the character type as follows by
pressing V/v.
Alphabet (upper case) t Numbers t
Symbols
When you tune in a station that provides RDS
services, “RDS” lights up and the program
service name appears on the display.
Note
• To enter a blank space, you can
– press V/v repeatedly until a blank space
appears in the display.
RDS may not work properly if the station you tuned
to is not transmitting the RDS signal properly or if
the signal strength is weak.
– press b without input a character.
2 Press
to enter the name.
The entered name is registered.
Note (Models of area code CEL, CEK
only)
When you name an RDS station and tune in that
station, the Program Service name appears instead
of the name you entered. (You cannot change the
Program Service name. The name you entered will
be overwritten by the Program Service name.)
69GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Program type Description
indication
Displaying RDS information
VARIED
Other types of programs such as
celebrity interviews, panel
games, and comedy
While receiving an RDS station,
press DISPLAY repeatedly on the
receiver.
Each time you press the button, RDS
information on the display changes cyclically
as follows:
POP M
Popular music programs
Rock music programs
Easy Listening
ROCK M
EASY M
LIGHT M
Program Service name t Frequency t
Instrumental, vocal, and choral
music
a)
Program Type indication t Radio Text
b)
indication t Current Time indication (in
CLASSICS
OTHER M
Performances of major
orchestras, chamber music,
opera, etc.
24-hour system mode) t Sound field
currently applied
a)Type of program being broadcast.
Music that does not fit into any
categories above, such as Rhythm
& Blues and Reggae
b)Text messages sent by the RDS station.
Notes
WEATHER
FINANCE
Weather information
• If there is an emergency announcement by
government authorities, “ALARM” flashes in the
display.
Stock market reports and trading,
etc.
• When the message consists of 9 characters or more,
the message scrolls across the display.
• If a station does not provide a particular RDS
service, “NO XXXX” (such as “NO TEXT”)
appears on the display.
CHILDREN
SOCIAL
Programs for children
Programs about people and the
things that affect them
RELIGION
PHONE IN
Programs of religious content
Programs where members of the
public express their views by
phone or in a public forum
Description of program types
TRAVEL
LEISURE
Programs about travel. Not for
announcements that are located
by TP/TA.
Program type Description
indication
NEWS
News programs
Programs on recreational
activities such as gardening,
fishing, cooking, etc.
AFFAIRS
Topical programs that expand on
current news
INFO
Programs offering information on
a wide spectrum of subjects,
including consumer affairs and
medical advice
JAZZ
Jazz programs
COUNTRY
NATION M
Country music programs
Programs featuring the popular
music of the country or region
SPORT
Sports programs
OLDIES
FOLK M
Programs featuring oldies music
Folk music programs
EDUCATE
Educational programs, such as
“how-to” and advice programs
DRAMA
Radio plays and serials
DOCUMENT Investigative features
NONE Any programs not defined above
CULTURE
Programs about national or
regional culture, such as language
and social concerns
SCIENCE
Programs about the natural
sciences and technology
70GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Notes
• Some audio input modes may not be set up
depending on the input.
• When the ANALOG DIRECT function is selected,
audio input is set to “ANALOG” automatically and
you cannot select other modes.
Other Operations
Switching between
digital and analog audio
(INPUT MODE)
You can select the audio input mode setting
when you connect components to both digital
and analog audio input jacks on the receiver.
1 Turn INPUT SELECTOR on the
receiver to select the input.
You can also use the input buttons on the
remote.
2 Press INPUT MODE repeatedly
on the receiver to select the
audio input mode.
The selected audio input mode appears on
the display.
Audio input modes
x AUTO IN
Gives priority to digital audio signals when
there are both digital and analog connections.
If there are no digital audio signals, analog
audio signals are selected.
x HDMI IN
Specifies the audio signals input to the HDMI
jack.
x COAX IN
Specifies the digital audio signals input to the
DIGITAL COAXIAL jack.
x OPT IN
Specifies the digital audio signals input to the
DIGITAL OPTICAL jack.
x ANALOG
Specifies the analog audio signals input to the
AUDIO IN (L/R) jacks.
71GB
Download from Www.Somanuals.com. All Manuals Search And Download.
the input you want the digital
audio input selected in step 7 to
be reassigned to (for example,
“VD2–DVD”).
Listening to digital sound
from other inputs
(DIGITAL ASSIGN)
If an input is switched to “DVD”, the
sound of the DVD player will also
become a digital sound through the
OPTICAL VIDEO 2/BD IN jack.
The input you can reassign to varies for
each digital audio input. For details, see
“Assignable inputs for digital audio
input” (page 73).
You can reassign digital audio input that has
OPTICAL or COAXIAL (VIDEO 1 IN,
VIDEO 2/BD IN, DVD IN, SAT IN, SA-CD/
CD/CD-R IN) signals to another input when
they are not currently being used.
For example, to output the sound source for
DVD player using the OPTICAL IN jack on
the receiver, then:
• Connect the optical output jack of the DVD
player to the OPTICAL VIDEO 2/BD IN
jack of the receiver.
To return to the previous display
Press B.
• Assign “VD2 OPT” to “DVD” in the
DIGITAL ASSIGN setting.
1 Press RECEIVER.
The RECEIVER indicator lights up and
receiver operation is activated.
2 Press MENU.
“1-LEVEL” appears on the display.
3 Press V/v repeatedly to select
“5-AUDIO”.
4 Press
or b to enter the
menu.
5 Press V/v repeatedly to select
“D. ASSIGN”.
6 Press
or b to enter the
parameter.
7 Press V/v repeatedly to select
the digital audio input you want
to reassign (for example, “VD2
OPT”).
8 Press
or b to enter your
selection.
72GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Assignable inputs for digital
audio input
Enjoying the DIGITAL
MEDIA PORT
(DMPORT)
The initial setting is marked with an
underscore.
Digital
audio
Assignable Display
inputs
input
The DIGITAL MEDIA PORT (DMPORT)
allows you to enjoy sound from a network
system such as a portable audio source or
computer.
By connecting a DIGITAL MEDIA PORT
adapter (not supplied), you can enjoy sound
from the connected component on the
receiver.
[Display]
VIDEO 1
OPTICAL
[VD1 OPT]
VIDEO 1
VIDEO 3
DVD
VD1–VD1
VD1–VD3
VD1–DVD
VD1–TV
TV
SA-CD/CD
VD1–CD
VIDEO2/BD VIDEO 2
VD2–VD2
VD2–VD3
VD2–DVD
VD2–TV
OPTICAL
[VD2 OPT]
DVD
For details, see the operating instructions
supplied with the DIGITAL MEDIA PORT
adapter.
VIDEO 3
TV
Notes
SA-CD/CD
VD2–CD
• Do not connect an adapter other than the DIGITAL
MEDIA PORT adapter.
• Do not connect or disconnect the DIGITAL
MEDIA PORT adapter while the receiver is turned
on.
• Depending on the DIGITAL MEDIA PORT
adapter, video output may not be possible.
• The DIGITAL MEDIA PORT adapters are
available for purchase depending on the area.
DVD
COAXIAL
[DVD
VIDEO 1
VIDEO 2
VIDEO 3
DVD
DVD–VD1
DVD–VD2
DVD–VD3
DVD–DVD
DVD–SAT
DVD–TV
SAT–VD3
SAT–DVD
SAT–SAT
SAT–TV
COAX]
SAT
TV
SAT
OPTICAL
[SAT OPT]
VIDEO 3
DVD
SAT
TV
SA-CD/CD
SAT–CD
SA-CD/CD/ VIDEO 1
CD–VD1
CD-R
COAXIAL
[CD COAX]
VIDEO 2
CD–VD2
VIDEO 3
CD–VD3
SAT
CD–TV
CD–CD
TV
SA-CD/CD
Notes
• You cannot reassign more than one digital audio
input to the same input.
• You cannot use the digital audio input for the
original input when it is reassigned to another
input.
• When you reassign the digital audio input, the
INPUT MODE setting may change automatically
(page 71).
• You cannot reassign the digital audio input to
TUNER, AUX and DMPORT input.
73GB
Download from Www.Somanuals.com. All Manuals Search And Download.
You can also view the images on the TV
screen by connecting the video output of the
DIGITAL MEDIA PORT adapter to the
receiver.
To view the images, proceed to “Watching a
connected component through DMPORT
connection” on page 75.
Connecting the DIGITAL MEDIA
PORT adapter
You can listen to the sound from the
component connected through the DIGITAL
MEDIA PORT adapter to the DMPORT jack
on the receiver.
TV
DIGITAL
(ASSIGNABLE)
SAT
IN
SAT IN
DVD IN
VIDEO 2/BD IN
HDMI
OUT
VIDEO 2/
BD IN
A
ANTENNA
VIDEO
IN
1
AM
OPTICAL
SA-CD/
CD/CD-R
IN
VIDEO IN
VIDEO IN VIDEO OUT VIDEO IN VIDEO OUT VIDEO IN
VIDEO OUT
MONITOR
DVD
IN
COAXIAL
L
L
L
L
L
DIGITAL MEDIA
PORT adapter
R
R
R
R
R
IN
OUT
IN
IN
AUDIO IN
SAT
AUDIO IN AUDIO OUT AUDIO IN
AUDIO OUT AUDIO IN
AUDIO
DMPORT
AUX
SA–CD/CD/CD–R
TV
DVD
VIDEO 2/BD
VIDEO 1
SUB WO
A
VIDEO 3 IN/PORTABLE AV IN
To one of the
VIDEO IN jacks
VIDEO
L
AUDIO
R
Front panel
* The type of connector varies depending on the DIGITAL MEDIA PORT adapter.
For details, see the operating instructions supplied with the DIGITAL MEDIA PORT adapter.
A Video cord (not supplied)
Notes
To detach the DIGITAL MEDIA
PORT adapter from DMPORT
jack
• When connecting the DIGITAL MEDIA PORT
adapter, be sure the connector is inserted with the
arrow mark facing towards the arrow mark on the
DMPORT jack.
• Be sure to make DMPORT connections firmly,
insert the connector straight in.
• As the connector of the DIGITAL MEDIA PORT
adapter is fragile, be sure to handle with care when
placing or moving the receiver.
2
1
DMPORT
Press and hold both sides of the connector and
then pull out the connector.
74GB
Download from Www.Somanuals.com. All Manuals Search And Download.
7 Press V/v repeatedly to select
the composite video input you
want to assign to DMPORT
input.
Listening to a connected
component through DMPORT
connection
Initial setting: –NONE
1 Press DMPORT.
The assignable composite video input are
VIDEO 1, VIDEO 2, VIDEO 3, DVD and
SAT inputs.
You can also use the INPUT SELECTOR
on the receiver to select “DMPORT”.
2 Start playback of the connected
For example, select “–VIDEO 1”.
When you press DMPORT, the images
from the component connected to the
VIDEO 1 VIDEO IN jack through
DIGITAL MEDIA PORT adapter will
appear on the TV screen.
component.
The sound is played back on the receiver.
For details, see the operating instructions
supplied with the DIGITAL MEDIA
PORT adapter.
Watching a connected
component through DMPORT
connection
To return to the previous
display
Press B.
Notes
You need to assign composite video input to
DMPORT input so that you can view the
images on the TV screen.
• Depending on the type of DIGITAL MEDIA
PORT adapter, you can operate the connected
component by using the remote. For details on
remote button operation, see page 9.
• Be sure you have made the video connection from
DIGITAL MEDIA PORT adapter to the receiver
(page 74).
1 Press RECEIVER.
The RECEIVER indicator lights up and
receiver operation is activated.
• Be sure you have connected the MONITOR
VIDEO OUT jack of the receiver to the TV (page
74).
• Depending on the DIGITAL MEDIA PORT
adapter, video output may not be possible.
2 Press MENU.
“1-LEVEL” appears on the display.
3 Press V/v repeatedly to select
“6-VIDEO”.
Tip
When listening to MP3 or other compressed music
using a portable audio source, you can enhance the
sound. Press MUSIC repeatedly to select
“PORTABLE” (page 61).
4 Press
or b to enter the
menu.
5 Press V/v repeatedly to select
“DMPORT V.”.
6 Press
or b to enter the
parameter.
75GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Naming inputs
Changing the display
You can enter a name of up to 8 characters for
inputs and display it on the receiver’s display.
This is convenient for labeling the jacks with
the names of the connected components.
You can check the sound field, etc., by
changing the information on the display.
Be sure to use the buttons on the receiver for
this operation.
Press DISPLAY repeatedly.
Each time you press the button, the display
changes cyclically as follows:
1 Press one of the input buttons
to select the input you want to
create an index name for.
You can also use INPUT SELECTOR on
the receiver.
All inputs except the FM and AM
band
a)
2 Press RECEIVER.
Index name of the input t Selected input
t Sound field currently applied
The RECEIVER indicator lights up and
receiver operation is activated.
FM and AM band
3 Press MENU.
b)
Program Service name or preset station
“1-LEVEL” appears on the display.
a)
name t Frequency t Program Type
b)
b)
indication t Radio Text indication t
4 Press V/v repeatedly to select
Current Time indication (in 24-hour system
b)
mode) t Sound field currently applied
5 Press
or b to enter the
a)Index name appears only when you have assigned
one to the input or preset station (page 68, 76).
Index name does not appear when only blank
spaces have been entered, or it is the same as the
input name.
menu.
6 Press V/v to select “NAME IN”.
7 Press or b to enter the
b)During RDS reception only (Models of area code
CEL, CEK only) (page 69).
parameter.
The cursor flashes and you can select a
character. Follow the procedure given in
“To create an index name” (page 69).
Note
Character or marks may not be displayed for some
languages.
76GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Sleep Timer
You can set the receiver to turn off
automatically at a specified time.
Recording using the
receiver
Recording onto a CD-R
Press SLEEP repeatedly while the
power is on.
Each time you press the button, the display
changes cyclically as follows:
You can record onto a CD-R using the
receiver. See the operating instructions
supplied with your CD recorder.
1 Press one of the input buttons
to select the playback
component.
2-00-00 t 1-30-00 t 1-00-00 t 0-30-00
t OFF
When sleep timer is activated, the display
dims.
You can also use INPUT SELECTOR on
the receiver.
Note
2 Prepare the playback
If you press any buttons on the remote or receiver
after the display dims, the display brightens up.
After a while, the display dims again if no button is
pressed.
component for playing.
For example, tune to the radio station you
want to record (page 65).
Tip
3 Prepare the recording
To check the remaining time before the receiver
turns off, press SLEEP. The remaining time appears
on the display. If you press SLEEP again, the sleep
timer will be canceled.
component.
Insert a blank CD-R into the CD recorder
and adjust the recording level.
4 Start recording on the
recording component, then
start playback on the playback
component.
Note
Sound adjustments do not affect the signal output
from the SA-CD/CD/CD-R OUT jacks.
77GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording onto a recording
media
Using the Remote
You can record from a video component using
the receiver. See the operating instructions
supplied with your recording component.
Programming the remote
You can program the remote to control non-
Sony components by changing the code. Once
the control signals have been memorized, you
can use those components as part of your
system.
Furthermore, you can also program the remote
for Sony components that the remote is unable
to control. Note that the remote can only
control components that accept infrared
wireless control signals.
1 Press one of the input buttons
to select the playback
component.
You can also use INPUT SELECTOR on
the receiver.
2 Prepare the playback
component for playing.
For example, insert the video tape you
want to copy into the VCR.
1 Press RM SET UP.
The RM SET UP indicator slowly flashes.
3 Prepare the recording
component.
2 Press the input button for the
Insert a blank video tape, etc. into the
recording component (connected to
VIDEO 1 OUT or VIDEO 2/BD OUT
jack) for recording.
component you want to control.
For example, if you are going to control a
CD player, press SA-CD/CD.
The RM SET UP indicator lights up.
4 Start recording on the
recording component, then
start playback on the playback
component.
3 Press the numeric buttons to
enter the numeric code (or one
of the codes if more than one
code exists) corresponding to
the component and the maker
of the component you want to
control (except TV).
Notes
• Some sources contain copy guards to prevent
recording. In this case, you may not be able to
record from the source.
• When DMPORT input is selected and you have
assigned VIDEO 1 or VIDEO 2 input to DMPORT
input, no video signals are output from the
VIDEO 1 VIDEO OUT or VIDEO 2/BD VIDEO
OUT jack.
See the tables on page 80–83 for
information on the numeric code(s)
corresponding to the component and the
maker of the component (the first digit
and the last two digits of the numeric code
correspond to the category and the
maker’s code respectively).
78GB
Download from Www.Somanuals.com. All Manuals Search And Download.
4 Press ENTER.
If programming is
unsuccessful, check the
following:
Once the numeric code has been verified,
twice and the remote automatically exits
the programming mode.
batteries are weak. Replace both batteries.
• If the indicator flashes 5 times in quick
an error has occurred. Start again from step
1.
5 Repeat steps 1 to 4 to control
other components.
Notes
• The indicator turns off while a valid button is
pressed.
• In step 2, if several input buttons are pressed, only
the last pressed button is valid.
• In step 2, if you press TUNER, you can only
program the button to control a tuner (page 83).
• In step 3, if an input button is pressed, the new
input is selected and the programming procedure
returns to the beginning of step 3.
entered are valid.
To clear the memory of the
remote
To clear all programmes, do the following to
reset the remote to factory settings.
While holding down MASTER
VOL –, press and hold ?/1 and then
The indicator flashes 3 times, then goes off.
To program the remote to
control a TV
The numeric codes
corresponding to the
1 Press RM SET UP.
component and the maker of
the component
The RM SET UP indicator slowly flashes.
2 Press TV.
3 Press the numeric buttons to enter the
numeric code (or one of the codes if more
than one code exists) for TV. For details, see
page 81.
Use the numeric codes in the tables below to
control non-Sony components and also Sony
components that the remote is normally unable
to control. Since the remote signal that a
component accepts differs depending on the
model and year of the component, more than
one numeric code may be assigned to a
component. If you fail to program your remote
using one of the codes, try using other codes.
4 Press ENTER.
Once the numeric code has been verified,
the RM SET UP indicator slowly flashes
twice and the remote automatically exits the
programming mode.
Notes
• The numeric codes are based on the latest
information available for each brand. There is a
chance, however, that your component will not
respond to some or all of the codes.
• All of the input buttons on this remote may not be
available when used with your particular
component.
To cancel programming
Press RM SET UP during any step. The RM
SET UP indicator flashes 5 times in quick
succession. The remote automatically exits the
programming mode.
To activate the input after
programming
Press the programmed button to activate the
input you want.
continued
79GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To control a CD player
To control an LD player
Maker
Code(s)
101, 102, 103
104, 123
105, 106, 107
108, 109, 110
111, 116
116
Maker
Code(s)
601, 602, 603
606
SONY
SONY
DENON
PIONEER
JVC
KENWOOD
MAGNAVOX
MARANTZ
ONKYO
To control a video CD player
Maker
Code(s)
SONY
605
112, 113, 114
115
PANASONIC
PHILIPS
To control a VCR
Maker
116
Code(s)
PIONEER
TECHNICS
YAMAHA
117
SONY
701, 702, 703, 704,
705, 706
115, 118, 119
120, 121, 122
AIWA*
710, 750, 757, 758
707, 708, 709, 759
740
AKAI
To control a DAT deck
Maker
BLAUPUNKT
EMERSON
711, 712, 713, 714,
715, 716, 750
Code(s)
203
SONY
FISHER
717, 718, 719, 720
PIONEER
219
GENERAL ELECTRIC 721, 722, 730
(GE)
To control an MD deck
GOLDSTAR/LG
GRUNDIG
HITACHI
723, 753
Maker
Code(s)
301
724
SONY
722, 725, 729, 741
717
DENON
JVC
302
ITT/NOKIA
JVC
303
726, 727, 728, 736
730, 731, 738
732, 733, 734, 735
736
KENWOOD
304
MAGNAVOX
MITSUBISHI/MGA
NEC
To control a tape deck
PANASONIC
729, 730, 737, 738,
739, 740
Maker
Code(s)
201, 202
204, 205
206, 207, 208, 209
210
SONY
PHILIPS
729, 730, 731
729
DENON
PIONEER
KENWOOD
NAKAMICHI
PANASONIC
PHILIPS
RCA/PROSCAN
722, 729, 730, 731,
741, 747
216
SAMSUNG
SANYO
742, 743, 744, 745
717, 720, 746
748, 749
211, 212
213, 214
215, 216
217, 218
PIONEER
TECHNICS
YAMAHA
SHARP
TELEFUNKEN
TOSHIBA
ZENITH
751, 752
747, 756
754
* If an AIWA VCR does not work even though you
enter the code for AIWA, enter the code for Sony
instead.
80GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To control a DVD player
To control a TV
Maker
Code(s)
401, 402, 403
424
Maker
Code(s)
501, 502
536, 539, 501
503
SONY
SONY
BROKSONIC
DENON
AIWA
405
AKAI
HITACHI
JVC
416
AOC
503
415, 423
419
CENTURION
CORONADO
CURTIS-MATHES
DAYTRON
DAEWOO
566
MITSUBISHI
ORITRON
PANASONIC
PHILIPS
PIONEER
RCA
517
417
503, 551, 566, 567
517, 566
406, 408, 425
407
504, 505, 506, 507,
515, 544
409, 410
414
FISHER
508, 545
548
FUNAI
SAMSUNG
TOSHIBA
ZENITH
416, 422
404, 421
418, 420
FUJITSU
528
GOLDSTAR/LG
503, 512, 515, 517,
534, 544, 556, 568
GRUNDIG
HITACHI
511, 533, 534
To control a DVD recorder
513, 514, 515, 544,
557, 503, 519, 517,
571
Maker
Code(s)
SONY
403
ITT/NOKIA
J.C.PENNY
JVC
521, 522
503, 510, 566
516, 552
517
KMC
MAGNAVOX
503, 518, 544, 515,
517, 566
MARANTZ
527
MITSUBISHI/MGA
503, 519, 527, 544,
566, 568
NEC
503, 520, 544, 554,
517, 540, 566
NORDMENDE
NOKIA
530, 558
521, 522, 573, 575
PANASONIC
509, 524, 553, 559,
572
PHILIPS
PHILCO
PIONEER
515, 518, 557, 570,
571
503, 504, 514, 517,
518
509, 525, 526, 540,
551, 555
PORTLAND
QUASAR
503
509, 535
continued
81GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To control a satellite tuner
Maker
Code(s)
RADIO SHACK
503, 510, 527, 565,
567
Maker
Code(s)
SONY
801, 802, 803, 804,
824, 825, 865
RCA/PROSCAN
SAMSUNG
510, 523, 529, 544,
503
AMSTRAD
BskyB
845, 846
862
503, 515, 531, 532,
534, 544, 556, 557,
517, 562, 563, 566,
569
GENERAL ELECTRIC 866
(GE)
GRUNDIG
HUMAX
THOMSON
PACE
859, 860
SAMPO
SABA
566
846, 847
547, 537, 549, 558,
530
857, 861, 864
SANYO
508, 545, 546, 560,
567
848, 849, 850, 852,
862, 863, 864
SCOTT
SEARS
503, 566
PANASONIC
PHILIPS
818, 855
517, 510, 508, 503,
518, 551
856, 857, 858, 859,
860, 864, 874
SHARP
535, 550, 517, 561,
565
NOKIA
851, 853, 854, 864
RCA/PROSCAN
BITA/HITACHI
HUGHES
866, 871
868
SYLVANIA
THOMSON
TOSHIBA
503, 518, 566
530, 537, 547, 549
867
535, 539, 540, 541,
551
JVC/Echostar/Dish
Network
873
TELEFUNKEN
537, 538, 547, 549,
558, 530
MITSUBISHI
SAMSUNG
TOSHIBA
872
875
TEKNIKA
WARDS
YORK
517, 518, 567
503, 517, 566
566
869, 870
To control a cable box
ZENITH
GE
542, 543, 567
509, 510, 503, 544
515, 534, 556
Maker
Code(s)
LOEWE
SONY
821, 822, 823
HAMLIN/REGAL
836, 837, 838, 839,
840
JERROLD/G.I./
MOTOROLA
806, 807, 808, 809,
810, 811, 812, 813,
814, 819
JERROLD
OAK
830, 831
841, 842, 843
PANASONIC
816, 826, 832, 833,
834, 835
PHILIPS
PIONEER
RCA
830, 831
828, 829
805
SCIENTIFIC
ATLANTA
815, 816, 817
TOCOM/PHILIPS
ZENITH
830, 831
826, 827
82GB
Download from Www.Somanuals.com. All Manuals Search And Download.
To control a tuner
Maker
Code(s)
002, 005
Additional Information
SONY
Glossary
To control a Blu-ray disc
recorder
x Component video
Maker
Code(s)
A format for transmitting video signal
information consisting of three separate
signals: luminance Y, chrominance Pb, and
chrominance Pr. High quality pictures, such as
DVD video or HDTV pictures, are transmitted
more faithfully. The three jacks are color -
coded green, blue and red.
SONY
310, 311, 312
To control a PSX
Maker
Code(s)
SONY
313, 314, 315
x Composite video
To control a DVD/VHS COMBO
A standard format for transmitting video
signal information. The luminance signal Y
and chrominance signal C are combined and
transmitted together.
Maker
Code(s)
SONY
411
To control a DVD/HDD COMBO
x Dolby Digital
Maker
Code(s)
Digital audio encoding/decoding technology
developed by Dolby Laboratories, Inc. It
consists of front (left/right), center, surround
(left/right) and sub woofer channels. It is a
designated audio standard for DVD video and
also known as 5.1 channel surround. Since
surround information is recorded and
reproduced in stereo, more realistic sound with
fuller presence is delivered than with Dolby
surround.
SONY
403
x Dolby Digital Surround EX
Acoustic technology developed by Dolby
Laboratories, Inc. Surround back information
is matrixed into regular left and right surround
channels so that the sound can be reproduced
in 6.1 channel. Active scenes, especially, are
recreated with a more dynamic and realistic
sound field.
continued
83GB
Download from Www.Somanuals.com. All Manuals Search And Download.
x Dolby Pro Logic II
x DTS-ES
This technology converts 2 channel stereo
recorded audio into 5.1 channel for playback.
There is a MOVIE mode for movies and
MUSIC mode for stereo sources such as
music. Old movies encoded in the traditional
stereo format can be enhanced with 5.1
channel surround sound.
Format for 6.1 channel playback with
surround back information. There are two
modes, “Discrete 6.1” which records all
channels independently, and “Matrix 6.1”
which matrixes surround back channel into
surround left and surround right channels. It is
ideal for playback of motion picture
soundtracks.
x Dolby Pro Logic IIx
Technology for 7.1 channel (or 6.1 channel)
playback. Along with audio encoded in Dolby
Digital Surround EX, 5.1 channel Dolby
Digital encoded audio can be reproduced in
7.1 channel (or 6.1 channel). Furthermore,
existing stereo recorded content can also be
reproduced in 7.1 channel (or 6.1 channel).
x DTS Neo:6
This technology converts 2 channel stereo
recorded audio for 6.1 channel playback.
There are two modes to select according to the
playback source or your preference, CINEMA
for movies, and MUSIC for stereo sources
such as music.
x Dolby Surround (Dolby Pro
Logic)
x HDMI (High-Definition
Multimedia Interface)
Audio processing technology developed by
Dolby Laboratories, Inc. Center and mono
surround information is matrixed into two
stereo channels. When reproduced, audio is
decoded and output in 4 channel surround
sound. This is the most common audio
processing method for DVD video.
HDMI is an interface that supports both video
and audio on a single digital connection. The
HDMI connection carries standard to high
definition video signals and multi channel
audio signals to audio/video components, such
as HDMI equipped TVs, in digital form
without degradation. The HDMI specification
supports HDCP (High-bandwidth Digital
Contents Protection), a copy protection
technology that incorporates coding
x DTS 96/24
A high sound quality digital signal format. It
records audio at a sampling frequency and bit
rate of 96 kHz/24bit which is the highest
possible for DVD video. The number of
playback channels varies depending on the
software.
technology for digital video signals.
x Sampling frequency
To convert analog audio to digital, analog data
should be quantified. This process is called
sampling, and the number of times per second
the analog data is quantified is called the
sampling frequency. A standard music CD
stores data quantified at 44,100 times per
second, which is expressed as a sampling
frequency of 44.1 kHz. Generally speaking, a
higher sampling frequency means better sound
quality.
x DTS Digital Surround
Digital audio encoding/decoding technology
for theaters developed by DTS, Inc. It
compresses audio less than Dolby Digital,
delivering a higher quality sound
reproduction.
84GB
Download from Www.Somanuals.com. All Manuals Search And Download.
x TSP (Time Stretched Pulse)
A TSP signal is a highly precise measuring
signal that utilizes impulse energy, measuring
a wide band, from low to high, in a short
period.
The amount of energy used to measure signals
is important to ensure measurement accuracy
in a normal indoor environment. Using TSP
signals makes it possible to measure signals
effectively.
Precautions
On safety
Should any solid object or liquid fall into the
cabinet, unplug the receiver and have it
checked by qualified personnel before
operating it any further.
On power sources
• Before operating the receiver, check that the
operating voltage is identical with your local
power supply.
The operating voltage is indicated on the
nameplate on the back of the receiver.
• The unit is not disconnected from the AC
power source (mains) as long as it is
connected to the wall outlet, even if the unit
itself has been turned off.
• If you are not going to use the receiver for a
long time, be sure to disconnect the receiver
from the wall outlet. To disconnect the AC
power cord, grasp the plug itself; never pull
the cord.
• The AC power cord must be changed only at
a qualified service shop.
On heat buildup
Although the receiver heats up during
operation, this is not a malfunction. If you
continuously use this receiver at a large
volume, the cabinet temperature of the top,
side and bottom rises considerably. To avoid
burning yourself, do not touch the cabinet.
continued
85GB
Download from Www.Somanuals.com. All Manuals Search And Download.
On placement
• Place the receiver in a location with
adequate ventilation to prevent heat buildup
and prolong the life of the receiver.
• Do not place the receiver near heat sources,
or in a place subject to direct sunlight,
excessive dust, or mechanical shock.
• Do not place anything on top of the cabinet
that might block the ventilation holes and
cause malfunctions.
Troubleshooting
If you experience any of the following
difficulties while using the receiver, use this
troubleshooting guide to help you remedy the
problem.
Audio
• Do not place the receiver near equipment
such as a TV, VCR, or tape deck. (If the
receiver is being used in combination with a
TV, VCR, or tape deck, and is placed too
close to that equipment, noise may result,
and picture quality may suffer. This is
especially likely when using an indoor
antenna. Therefore, we recommend using an
outdoor antenna.)
• Use caution when placing the receiver on
surfaces that have been specially treated
(with wax, oil, polish, etc.) as staining or
discoloration of the surface may result.
There is no sound, no matter which
component is selected, or only a very
low-level sound is heard.
• Check that the speakers and components
are connected securely.
components are turned on.
• Check that MASTER VOLUME is not set
to “VOL MIN”.
• Check that the SPEAKERS (OFF/A/B/
A+B) is not set to off (page 33).
• Check that headphones are not connected.
• Press MUTING to cancel the muting
function.
• Check that you have selected the correct
component with the input buttons (page
40).
On operation
Before connecting other components, be sure
to turn off and unplug the receiver.
• The protective device on the receiver has
been activated. Turn off the receiver,
eliminate the short-circuit problem, and
turn on the power again.
On cleaning
Clean the cabinet, panel, and controls with a
soft cloth slightly moistened with a mild
detergent solution. Do not use any type of
abrasive pad, scouring powder, or solvent,
such as alcohol or benzine.
There is no sound from a specific
component.
• Check that the component is connected
correctly to the audio input jacks for that
component.
• Check that the cord(s) used for the
connection is (are) fully inserted into the
jacks on both the receiver and the
component.
If you have any questions or problems
concerning your receiver, please consult your
nearest Sony dealer.
86GB
Download from Www.Somanuals.com. All Manuals Search And Download.
There is no sound from one of the front
speakers.
The source sound input from the HDMI
jack on the receiver is not output from
the receiver or TV speaker.
• Check the setting of HDMI AUDIO in the
VIDEO menu (page 54).
• Connect a pair of headphones to the
PHONES jack to verify that sound is
output from the headphones. If only one
channel is output from the headphones, the
component may not be connected to the
receiver correctly. Check that all the cords
are fully inserted into the jacks on both the
receiver and the component. If both
channels are output from the headphones,
the front speaker may not be connected to
the receiver correctly. Check the
connection of the front speaker which is
not outputting any sound.
• Make sure you have connected to both the
L and R jacks of an analog component, and
not only to either the L or R jack. Use an
audio cord (not supplied).
• Check the HDMI connection.
• The sound is not output when the amplifier
menus are displayed on the TV screen. In
this case, set “OSD” in VIDEO menu to
“OSD OFF”.
• You cannot listen to the Super Audio CD
by connecting HDMI.
• Depending on the playback component,
you may need to set up the component.
Refer to the operating instructions
supplied with each component.
The left and right sounds are
• Check that the speakers and components
are connected correctly and securely.
• Adjust the balance parameters using the
LEVEL menu.
There is no sound from analog 2
channel sources.
• Check that the INPUT MODE is not set to
“COAX IN”, “OPT IN” or “HDMI IN” for
the selected input (page 71).
There is severe hum or noise.
• Check that the speakers and components
are connected securely.
• Check that the connecting cords are away
from a transformer or motor, and at least
3 meters away from a TV set or
fluorescent light.
• Move your audio components away from
the TV.
• The plugs and jacks are dirty. Wipe them
with a cloth slightly moistened with
alcohol.
There is no sound from digital sources
(from COAXIAL or OPTICAL input jack).
• Check that the INPUT MODE is not set to
“ANALOG” or “HDMI IN” (page 71).
• Check that the ANALOG DIRECT
function is not selected.
• Check that the DIGITAL ASSIGN
function is not used to reassign the audio
input of another source to the selected
input (page 72).
There is pop noise from a specific
component connected to this receiver
when you turn on the component.
There is no sound, or only a very low-
level sound is heard from the center/
surround/surround back speakers.
• Check that the INPUT MODE is not set to
“AUTO IN” for the selected input (page
71).
• Select a CINEMA STUDIO EX mode
(page 62).
• Adjust the speaker level (page 39).
• Make sure the center/surround speakers
are set to either “SMALL” or “LARGE”
(page 47).
• Make sure the surround back speakers are
set to “SINGLE” or “DUAL” (page 47).
continued
87GB
Download from Www.Somanuals.com. All Manuals Search And Download.
There is no sound from the surround
back speaker.
The MULTI CHANNEL DECODING lamp
does not light up in blue.
• Some discs have no Dolby Digital
Surround EX flag even though the
packages have Dolby Digital Surround EX
logos. In this case, select “SB ON” (page
51).
• Check that the playback component is
connected to a digital jack and the input is
selected properly on this receiver.
• Check whether the input source of the
software being played back corresponds to
the multi channel format.
There is no sound from the sub woofer.
• Check that the sub woofer is connected
correctly and securely.
• Make sure you have turned on your sub
woofer.
• Check whether the setup on the playback
component is set to multi channel sound.
• Check whether the digital audio output of
selected input is not assigned to another
component input using DIGITAL
• Make sure the sub woofer is set to “YES”
(page 47).
ASSIGN function (page 72).
• Depending on the selected sound field, no
sound output from the sub woofer.
• When all speakers are set to “LARGE”
and “NEO6 CIN” or “NEO MUS” is
selected, there is no sound from the sub
woofer.
Video
There is no picture or an unclear
picture appears on the TV screen.
• Select the appropriate input using the input
buttons.
• Set your TV to the appropriate input mode.
• Move your audio components away from
the TV.
The surround effect cannot be
obtained.
• Make sure the sound field function is on
(press MOVIE or MUSIC).
• Sound fields do not function for signals
with a sampling frequency of more than
48 kHz.
• Assign the composite video input to
DMPORT input correctly.
• Depending on the DIGITAL MEDIA
PORT adapter, video output may not be
possible.
Dolby Digital or DTS multi channel
sound is not reproduced.
• Check that the DVD, etc. you are playing
is recorded in Dolby Digital or DTS
format.
The source image input to the HDMI
jack on the receiver is not output from
the TV.
• When connecting the DVD player, etc., to
the digital input jacks of this receiver,
check the audio setting (the settings for the
audio output) of the connected component.
• Check the HDMI connection.
• Depending on the playback component,
you may need to set up the component.
Refer to the operating instructions
supplied with each component.
Recording cannot be carried out.
• Check that the components are connected
correctly.
• Select the source component using the
input buttons (page 40).
Recording cannot be carried out.
• Check that the components are connected
correctly.
• Select the source component using the
input buttons (page 40).
88GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Tuner
The RDS information that you want
does not appear.*
The FM reception is poor.
• Contact the radio station and find out
whether they actually provide the service
in question. If so, the service may be
temporarily out of order.
• Use a 75-ohm coaxial cable (not supplied)
to connect the receiver to an outdoor FM
antenna as shown below. If you connect
the receiver to an outdoor antenna, ground
it against lightning. To prevent a gas
explosion, do not connect the ground wire
to a gas pipe.
Remote commander
Outdoor FM antenna
The remote does not function.
• Point the remote at the remote sensor on
the receiver.
• Remove any obstacles in the path between
the remote and the receiver.
Receiver
ANTENNA
AM
• Replace all the batteries in the remote with
new ones, if they are weak.
• Make sure you select the correct input on
the remote.
Ground wire
(not supplied)
• When you operate a programmed non-
Sony component, the remote may not
function properly depending on the model
and the maker of the component.
To ground
Radio stations cannot be tuned in.
• Check that the antennas are connected
securely. Adjust the antennas and connect
an external antenna, if necessary.
• The signal strength of the stations is too
weak (when tuning in with automatic
tuning). Use direct tuning.
• Make sure you set the tuning interval
correctly (when tuning in AM stations
with direct tuning).
• No stations have been preset or the preset
stations have been cleared (when tuning
by scanning preset stations). Preset the
stations (page 67).
• Press DISPLAY repeatedly on the
receiver so that the frequency appears on
the display.
* Models of area code CEL, CEK only.
Error messages
If there is a malfunction, the display shows a
message. You can check the condition of the
system by the message. Refer to the following
table to solve the problem. If any problem
persists, consult your nearest Sony dealer.
If an error message appears while you perform
Auto Calibration, see “When error codes
appear” (page 36) to solve the problem.
PROTECT
Irregular current is output from the
speakers. The receiver will automatically
turn off after a few seconds. Check the
speaker connection and turn on the power
again.
RDS does not work.*
• Make sure that you are tuned to an FM
RDS station.
• Select a stronger FM station.
continued
89GB
Download from Www.Somanuals.com. All Manuals Search And Download.
If you are unable to remedy the
problem using the
troubleshooting guide
Specifications
Clearing the receiver’s memory may remedy
the problem (page 32). However, note that all
memorized settings will be reset to their
factory settings and you will have to readjust
all settings on the receiver.
Amplifier section
Models of area code CEL, CEK
Minimum RMS Output Power
(8 ohms, 20 Hz - 20 kHz, THD 0.09%)
1)
90 W + 90 W
Stereo Mode Output Power
(8 ohms, 1 kHz, THD 1%)
100 W + 100 W
Surround Mode Output Power
(8 ohms, 1 kHz, THD 10%)
140 W per channel
If the problem persist
Consult your nearest Sony dealer. Note that if
service personnel changes some parts during
repair, these parts may be retained.
1)
2)
1)
Reference sections for clearing
the receiver’s memory
Models of area code E2, TW
Minimum RMS Output Power
(8 ohms, 20 Hz - 20 kHz, THD 0.09%)
To clear
See
1)
85 W + 85 W
All memorized settings
Customized sound fields
page 32
page 65
Stereo Mode Output Power
(8 ohms, 1 kHz, THD 1%)
100 W + 100 W
Surround Mode Output Power
1)
2)
(8 ohms, 1 kHz, THD 10%)
1)
130 W per channel
Models of area code KR
Minimum RMS Output Power
(8 ohms, 20 Hz - 20 kHz, THD 0.09%)
1)
90 W + 90 W ,
3)
80 W + 80 W
Stereo Mode Output Power
(8 ohms, 1 kHz, THD 1%)
100 W + 100 W ,
90 W + 90 W
Surround Mode Output Power
1)
3)
2)
(8 ohms, 1 kHz, THD 10%)
1)
140 W per channel ,
120 W per channel
3)
1)Measured under the following conditions:
Area code
CEL, CEK, KR
E2
Power requirements
230 V AC, 50 Hz
240 V AC, 50 Hz
110 V AC, 60 Hz
TW
90GB
Download from Www.Somanuals.com. All Manuals Search And Download.
2)Reference power output for front, center, surround
and surround back speakers. Depending on the
sound field settings and the source, there may be
no sound output.
6)You can change the AM tuning scale to 9 kHz or
10 kHz. After tuning in any AM station, turn off
the receiver. While holding down TUNING
MODE, press ?/1. All preset stations will be
erased when you change the tuning scale. To reset
the scale to 10 kHz (or 9 kHz), repeat the
procedure.
3)Measured under the following conditions:
220 V AC, 60 Hz
Frequency response
Video section
Analog
10 Hz – 70 kHz,
+0.5/–2 dB (with sound
field and equalizer
bypassed)
Inputs/Outputs
Video:
COMPONENT VIDEO:
Y: 1 Vp-p, 75 ohms
1 Vp-p, 75 ohms
Input
Analog
Sensitivity: 500 mV/
50 kohms
PB/CB: 0.7 Vp-p, 75 ohms
PR/CR: 0.7 Vp-p, 75 ohms
80 MHz HD Pass Through
S/N4): 96 dB
(A, 500 mV5))
Digital (Coaxial) Impedance: 75 ohms
General
S/N: 100 dB
(A, 20 kHz LPF)
Digital (Optical) S/N: 100 dB
(A, 20 kHz LPF)
Output (Analog)
Power requirements
Area code
CEL, CEK
E2
Power requirements
230 V AC, 50/60 Hz
120/220/240 V AC,
50/60 Hz
AUDIO OUT
Voltage: 500 mV/
10 kohms
TW
KR
110 V AC, 60 Hz
220–230 V AC, 50/60 Hz
SUB WOOFER Voltage: 2 V/1 kohm
Equalizer
Gain levels
±10 dB, 0.5 dB step
Power output (DIGITAL MEDIA PORT)
4)INPUT SHORT (with sound field and equalizer
bypassed).
DC OUT:
5V, 700 mA
5)Weighted network, input level.
Power consumption
Area code
CEL, CEK, KR
E2
Power consumption
FM tuner section
230 W
270 W
650 W
Tuning range
Antenna
87.5 – 108.0 MHz
FM wire antenna
TW
Antenna terminals 75 ohms, unbalanced
Intermediate frequency
10.7 MHz
Power consumption (during standby mode)
0.3 W (When
AM tuner section
Tuning range
“CONTROL” in VIDEO
menu is set to “CTRL
OFF”.)
Area code
Tuning
scale
AC outlet (Models of area code E2 only)
1 switched, 100 W/
10 kHz step 9 kHz step
0.4 A MAX
CEL, CEK, TW, KR
E2
531–1,602
kHz
Dimensions (width/height/depth) (Approx.)
–
430 × 157.5 × 351.5 mm
including projecting parts
and controls
530–1,610
kHz6)
531–1,602
kHz6)
Antenna
Loop antenna
Intermediate frequency
450 kHz
continued
91GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Mass (Approx.)
Models of area code CEL, CEK, KR
10.6 kg
Models of area code E2, TW
11.2 kg
Supplied accessories
FM wire antenna (1)
AM loop antenna (1)
Remote commander RM-AAP017 (1)
R6 (size-AA) batteries (2)
Optimizer microphone ECM-AC2 (1)
For details on the area code of the
component you are using, see page 2.
Design and specifications are subject to
change without notice.
92GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Index
Numerics
2CH STEREO 64
5.1 channel 14
7.1 channel 14
I
INPUT MODE 71
speaker system 33
Sleep Timer 77
resetting 65
selecting 61
connecting 15
Super Audio CD player
M
A
Menu
AUTO FORMAT DIRECT
(A.F.D.) 59
AUDIO 53
EQ 50
SUR 50
B
Blu-ray disc player
connecting 20
TUNER 52
C
CD player
connecting 17, 18
playback 42
CD recorder
connecting 17, 18
51
T
Tape deck
Recording
D
connecting 18
TEST TONE 39
Tuner
connecting 30
Tuning
automatically 65
directly 66
to preset stations 68
TV
DIGITAL ASSIGN 72
Digital Cinema Sound
(DCS) 63
onto a recording media
78
DIGITAL MEDIA PORT
connecting 74
input 40
video assign 75
Dolby Digital 83
DTS 84
connecting 22
DVD player
connecting 24
playback 43
DVD recorder
connecting 25
V
VCR
connecting 27
Video game
connecting 27
E
Error messages 89
H
HDMI
connecting 20
93GB
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
Download from Www.Somanuals.com. All Manuals Search And Download.
(1)
Sony Corporation Printed in Malaysia
Download from Www.Somanuals.com. All Manuals Search And Download.
|