SK 5212-II
Instruction manual
Download from Www.Somanuals.com. All Manuals Search And Download.
Contents
Contents
Important safety instructions .................................................................................................................. 2
The SK 5212-II bodypack transmitter .................................................................................................... 3
Delivery includes ......................................................................................................................................... 5
Product overview ........................................................................................................................................ 6
Overview of the SK 5212-II bodypack transmitter ........................................................................ 6
Overview of the displays ..................................................................................................................... 7
Putting the bodypack transmitter into operation .............................................................................. 8
Inserting and changing the battery .................................................................................................. 8
Connecting the microphone ................................................................................................................ 8
Connecting the antenna ...................................................................................................................... 9
Attaching the transmitter to clothing .............................................................................................. 9
Using the bodypack transmitter .......................................................................................................... 10
Switching the transmitter on/off ................................................................................................... 10
Doing a frequency check ................................................................................................................... 11
The automatic lock mode (autolock function) ............................................................................. 11
Using operating menu ............................................................................................................................ 13
The buttons ......................................................................................................................................... 13
Overview of the operating menu .................................................................................................... 14
Working with the operating menu ................................................................................................. 15
Overview of the menus ..................................................................................................................... 18
Adjustment tips for the operating menu ........................................................................................... 20
Selecting a channel – “CHAN“ ......................................................................................................... 20
Entering a name – “NAME” .............................................................................................................. 22
Adjusting the microphone sensitivity – “ATTEN” ....................................................................... 22
Adjusting the bass roll-off frequency – “LOWCUT” .................................................................... 23
Selecting the standard display – “VIEW” ...................................................................................... 23
Loading the factory-preset default settings – “RESET” ............................................................. 23
Activating/deactivating the automatic lock mode – “LOCK” ................................................... 24
Adjusting the output power – “POWER” ...................................................................................... 24
Displaying the software revision – “SW--REV“ ............................................................................ 24
Exiting the operating menu – “EXIT” ............................................................................................. 25
Cleaning the bodypack transmitter ..................................................................................................... 25
Recommendations and tips ................................................................................................................... 25
If a problem occurs ... .............................................................................................................................. 26
Accessories ................................................................................................................................................ 27
Specifications ............................................................................................................................................ 28
Manufacturer Declarations .................................................................................................................... 31
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Important safety instructions
Important safety instructions
•
•
Read this instruction manual.
Keep this instruction manual. Always include this instruction manual when passing the
product on to third parties.
•
•
•
Heed all warnings and follow all instructions in this instruction manual.
Use only a cloth for cleaning the product.
Do not place the product near any heat sources such as radiators, stoves, or other devices
(including amplifiers) that produce heat.
•
•
Only use attachments/accessories specified by Sennheiser.
Refer all servicing to qualified service personnel.
Servicing is required if the product has been damaged in any way, liquid has been spilled,
objects have fallen inside, the product has been exposed to rain or moisture, does not
operate properly or has been dropped.
•
WARNING: This product should be protected against the ingress of liquids (eg:
water, sweat, etc.) as this can cause malfunctions due to shortages or corrosion,
etc.
Intended use
Intended use of the product includes:
•
•
having read this instruction manual especially the chapter “Important safety instructions”,
using the product within the operating conditions and limitations described in this
instruction manual.
“Improper use” means using the product other than as described in this instruction manual, or
under operating conditions which differ from those described herein.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
The SK 5212-II bodypack transmitter
The SK 5212-II bodypack transmitter
The SK 5212-II is a professional bodypack transmitter that is easy to use and is easily adaptable
to a wide variety of applications.
The SK 5212-II bodypack transmitter has the following features:
•
•
•
•
•
•
•
•
•
Extremely compact diecast metal housing
Very rugged casing
Special protection against the ingress of moisture
Backlit LC display
Menu-assisted operation
Specially suitable for multi-channel applications
Up to 184 MHz switching bandwidth
Transmission frequencies tuneable in steps of 5 kHz
Adjustable output power:
10 mW, 10 mW Low Intermodulation mode (LoI), 50 mW.
In Low Intermodulation mode (LoI), the intermodulation performance is significantly
improved
•
•
•
•
•
•
Constant output power until the battery is completely discharged
Audio sensitivity adjustable in steps of 1 dB, sensitivity range of 70 dB
Signal-to-noise ratio typ. 110 dB(A)
Switchable low-cut filter
Battery status display, battery status also transmitted to the receiver
Reliable, easy-to-use clip attachment
Information on the compander system
This product is equipped with HiDynplus™, the Sennheiser noise reduction system that reduces RF
interference. HiDynplus™ offers extreme operational reliability and ensures highest transmission
quality.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
The SK 5212-II bodypack transmitter
The frequency bank system
The transmitter is available in five UHF frequency ranges with up to 184 MHz switching
bandwidth:
Range N-GB
606 – 790 MHz
Range N-US
614.075 –
697.925 MHz
Range
N
614 – 798 MHz
Range
L
Range
P
470 – 638 MHz
776 – 866 MHz
400
500
600
700
800
900
MHz
The transmitter has two frequency banks:
Channel Frequency bank
“FIX”
“VAR”
1
The transmission frequencies are factory-
preset (see enclosed frequency table) and
cannot be changed.
The transmission frequencies can
be freely selected within the
switching bandwidth.
2
...
max. 59
Optimized for maximum
transmission reliability
Additionally available
channels in
Low Intermodulation mode
The factory-preset frequencies within the frequency bank “FIX” are interference and
intermodulation-free.
̈ Set all transmitters of your multi-channel system to different channels within the
frequency bank “FIX”.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Delivery includes
Suitable receivers
•
•
•
•
•
EM 1046 system
EM 3532, EM 3031, EM 3032
EK 3041, EK 3241
EM 3731, EM 3732, EM 3732 COM
EM 3731-II, EM 3732-II, EM 3732 COM-II
Delivery includes
Delivery of the bodypack transmitter includes:
1 SK 5212-II bodypack transmitter
1 AA size battery, 1.5 V
antennas for different frequency ranges
1 belt clip
1 instruction manual
1 frequency table
1 supplement “Legal requirements for the use of radiomicrophones”
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Product overview
Product overview
Overview of the SK 5212-II bodypack transmitter
³ Microphone input
¶ Battery compartment catches
· Red LED for operation and battery status º Type plate
indication
(ON/LOW BATT/PEAK)
¾ Multi-function switch with three switch
positions:
» Antenna socket
̄ (DOWN), ꢀ (UP) and SET
¿ LC display, backlit
µ ON/OFF button with ESC function (cancel)
´ Battery compartment
² Battery compartment cover
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Product overview
Overview of the displays
Display backlighting
When the lock mode is deactivated, the LC display remains backlit for approx. 20 seconds after
pressing a button.
2
3
1
RF
AF
CH dB MHz
8
7 6
5
4
ቢ Alphanumeric display
ቦ “MHz” – appears when the transmission
frequency is displayed
ባ Level display for audio signal “AF”
ቧ “dB” – appears when the microphone
ቤ “RF” – appears when an RF signal is
sensitivity is displayed
transmitted
ቨ “CH” – appears when the channel number is
ብ Lock mode icon (lock mode is
displayed
activated)
ቩ Battery status display
Operation and battery status indication
·
Meaning
... lights up normally
The transmitter is switched on and the capacity of the battery is
sufficient (ON).
... is flashing
The battery is going flat (LOW BATT)!
... lights up brightly
The transmitter is fully modulated (PEAK).
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Putting the bodypack transmitter into operation
Putting the bodypack transmitter into
operation
Inserting and changing the battery
For powering the transmitter, use a 1.5 V AA size battery.
̈ Open the battery compartment by pushing the two
¶
̈ Insert the battery as shown in the diagram on the left.
Please observe correct polarity when inserting the
battery.
̈ Close the battery compartment.
²
²
Connecting the microphone
The transmitter is designed for use with Sennheiser lavalier microphones and headmics. The
the transmitter.
̈ Screw down the coupling ring.
³
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Putting the bodypack transmitter into operation
Connecting the antenna
The transmitter is supplied with plug-on antennas: Choose the antenna that matches the
frequency range used.
transmitter.
̈ Screw down the coupling ring.
– 6
Only use antennas that match the frequency range of
the transmitter.
3
8
»
The frequency range is printed on the antenna.
Attaching the transmitter to clothing
The transmitter is attached to clothing (e.g. belt, waistband)
with the supplied belt clip.
The clip is detachable so that you can also attach the
transmitter with the antenna pointing downwards. To do so,
withdraw the clip from its fixing points and attach it the
other way round.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the bodypack transmitter
Using the bodypack transmitter
Switching the transmitter on/off
̈ Open the battery compartment.
·
¿
To switch the transmitter on:
pause, “RF” appears on the LC display panel.
µ
Remove the battery when the transmitter will not be used for extended periods of time.
The transmitter can only be switched off when the lock mode is deactivated (see
entry (ESC function).
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the bodypack transmitter
Doing a frequency check
The transmitter has a frequency check mode that prevents the transmitter transmitting on an
unwanted frequency after switch-on.
̈ When switching on the transmitter, keep the ON/OFF
¿
The RF signal is deactivated. The current frequency is
If the displayed frequency is the correct one,
µ
¾
panel and the RF signal is activated.
ቤ
RF
MHz
To change the transmission frequency, proceed as follows:
̈ Within five seconds change to the “CHAN” or “TUNE” menu item.
The automatic lock mode (autolock function)
The transmitter has an autolock function (automatic lock mode) that can be activated or
lock mode is automatically activated 10 seconds after pressing the last button.
RF
being activated.
MHz
4
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the bodypack transmitter
Deactivating the autolock function temporarily
To make changes to the settings via the operating menu, you can temporarily deactivate the lock
mode.
¿
or ̄ (DOWN).
µ
¾
țSET).
You can now change the settings.
SET
UP
DOWN
¾
After you have exited the operating menu, the lock mode is automatically activated after
10 seconds. You can activate the lock mode immediately by briefly pressing the ON/OFF
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Using operating menu
Using operating menu
The buttons
Button
Mode
Function of the button
ON/OFF
Switched off
•
Briefly pressing the button:
Switches the transmitter on
•
Keeping the button pressed:
Does a frequency check
Display mode
•
•
•
Briefly pressing the button
(with activated autolock function):
Immediately activates the lock mode
Briefly pressing the button
(with activated lock mode):
Calls up the lock mode for deactivation
Pressing the button for 3 sec.
(with deactivated lock mode):
Switches the transmitter off
Selection mode
Setting mode
Cancels the entry and returns to the display mode
Cancels the entry and returns with the last setting stored
to the last parameter displayed in the display mode
țSET
Display mode
•
With deactivated lock mode:
Changes to the selection mode
•
With activated lock mode:
Calls up the lock mode for deactivation
Selection mode
Setting mode
Changes to the setting mode of the selected menu
Stores the setting and returns to the selection mode
(“STORED” is displayed)
ꢀ (UP)/
̄ (DOWN)
Display mode
Selection mode
Setting mode
Changes to the previous parameter (ꢀ) or changes to the
next parameter (̄)
Changes to the previous menu (ꢀ) or changes to the next
menu (̄)
Increases (ꢀ) or reduces (̄) the setting of the selected
menu
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Using operating menu
Overview of the operating menu
Menu
Function of the menu
“CHAN”
“TUNE”
“NAME”
“ATTEN”
“LOWCUT”
“VIEW”
Selects a channel
Sets transmission frequencies for the frequency bank “VAR” (variable bank)
Enters a name
Adjusts the microphone sensitivity
Adjusts the bass roll-off frequency
Selects the standard display
“RESET”
“LOCK”
Loads the factory-preset default settings
Activates/deactivates the autolock function
Adjusts the output power
“POWER”
“SW--REV”
“EXIT”
Displays the current software revision
Exits the operating menu and returns to the standard display
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Using operating menu
Working with the operating menu
The operating menu has three modes:
•
•
•
Display mode:
In display mode, you can display the current menu settings one after the other – even when
the lock mode is activated.
Selection mode:
In selection mode, you can select the menu whose setting you want to change. To change to
the selection mode, the lock mode must be deactivated.
Setting mode:
In setting mode, you can change the setting of the selected menu.
By way of example of the “LOWCUT” menu, this section describes how to use the operating
menu.
Display Mode
Selection Mode
Setting Mode
SET/ON
MHz
MHz
SET
SET
SET
TUNE
MHz
SET
120
LOWCUT
MHz
Hz
Current low-cut
frequency
Adjusting
the low-cut
frequency
Current low-cut
frequency
STORED
FLAT
Hz
SET
FLAT,
120 Hz
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Using operating menu
After switch-on
After switch-on, the standard display is shown on the LC display panel. Depending on the setting,
the transmission frequency, the channel number or the name of the transmitter is displayed.
Displaying the menu settings in display mode
In display mode, and with the lock mode activated, you can display the current menu settings
returns to the standard display.
SET
(DOWN) to display the menu settings. If you slide the multi-function
switch repeatedly to the same position, all menu settings are
displayed one after the other.
UP
DOWN
¾
Changing to the selection mode
To change from display mode to selection mode, you have to deactivate the lock mode.
temporarily” on page 12. You can now select the menu whose settings you want to adjust.
You change to the menu that was displayed in display mode.
Selecting a menu
SET
(DOWN).
UP
DOWN
¾
The name of the selected menu starts flashing.
Changing to the setting mode of a selected menu
SET
UP
You change to the setting mode of the selected menu where you can
adjust settings. The current setting that can be adjusted flashes on
DOWN
¾
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Using operating menu
Adjusting a setting
jumps either forwards or backwards to the next setting.
In the “ATTEN”, “CHAN”, “TUNE” and “NAME” menu and when slid to the position
ꢀ
(UP) or
̄
continuously. In the “TUNE” menu, the cycling of the display is continuously accelerated. The
“fast search” function allows you to get fast and easily to your desired setting.
Storing a setting
SET
permanently store a setting. “STORED” appears on the display panel,
indicating that the setting has been stored.
The display then returns to the last edited menu.
UP
DOWN
¾
With most menus, new settings become effective immediately without having to be stored. An
exception are the “TUNE” and “CHAN” menus. With these menus, new settings only become
that the setting has been stored).
Exiting the operating menu
̈ Select the “EXIT” menu to exit the operating menu and to return to
the standard display.
cancel your entry (ESC function) and return you to the standard
display with the last stored settings.
µ
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Using operating menu
Overview of the menus
Deactivate the lock mode before adjusting the settings (see “Deactivating the autolock function
and return you to the display mode.
Display mode
Selection mode
Setting mode
CH MHz
MHz
1 sec.
Transmission
frequency
1 sec.
RF
SET
SET
SET
CHAN
FIX. 01
CH
Channel
FIX.01...59
VAR. 20
CH
CH
Current
channel bank
Changing the
channel bank and
the channel
/
:
Channel
/
:
VAR.01...20
SET
STORED
VAR. 20
CH
Current channel
Keep SET pressed
SET
RF
TUNE
MHz
Current frequency
Setting the
frequencies for
the channels of
channel bank
“VAR”
VAR. 20
CH
Current channel
VAR. 01
CH
/
:
VAR.01...20
1 Sek.
SET
MHz
MHz
Current frequency
Current frequency
MHz
Sets the
frequency
MHz
Sets the
frequency
/
:
/
:
SET
SET
STORED
SET
SET
RF
RF
RF
RF
NAME
VOCAL
LOCAL
/
:
Name
Assigning a
name
Current name
Current name
(6 characters)
Letters w/o
pronounciation
marks, numbers
from 0...9, special
characters, spaces
STORED
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Using operating menu
Display mode
Selection mode
Setting mode
SET
RF
AF
SET
RF
RF
RF
ATTEN
12
13
IIIIIIII
dB
dB
Adjusting the
attenuation
Current
/
:
Adjust the
Current
modulation
attenuation
setting
attenuation in 1-dB
steps from –30 to
+40 dB
SET
STORED
dB
SET
SET
Current
attenuation
SET
SET
RF
RF
RF
LOWCUT
FLAT
120
Hz
Hz
Hz
Adjusting the
Current low-cut
frequency
Current low-cut
FLAT,
low-cut frequency
frequency setting
120 Hz
SET
STORED
RF
RF
RF
RF
CHAN
VIEW
NAME
FREQ
Selecting the
Current standard
display
/
:
FREQ,
/
:
FREQ,
standard display
NAME, CHAN
NAME, CHAN
SET
SET
STORED
RF SET
RF
RF
RF
RESET
RST. OK
RST. NO
Security check
/
:
OK, NO
Loading the
factory-preset
“reset” = OK
default settings
“reset” = NO
reset is cancelled
SET
SET
RF
RF
LOCK
LOC. ON
LOC. OFF
Setting the
Current setting
/
:
LOC.ON
LOC.OFF
autolock function
SET
SET
STORED
SET
RF
POWER
PWR.LO
PWR.HI
PWR.LoI
PWR.LoI
PWR.LO
PWR.HI
PWR.LO
Current output
power
Adjusting the
output power
Current setting
STORED
SET
SET
RF
RF
SW--REV
NET.200
VAR. 01
dB
Displaying the
current
software revision
software revision
RF
EXIT
Exiting the
operating menu
SET
MHz
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjustment tips for the operating menu
Adjustment tips for the operating menu
When setting frequencies on the bodypack transmitter, please observe the following:
̈ Make sure that the desired frequencies are listed in the enclosed frequency table and
approved and legal in your country. If necessary, apply for an operating license.
For an overview of the frequencies and transmission powers, refer to the enclosed
supplement “Legal requirements for the use of radiomicrophones”.
Selecting a channel – “CHAN“
Via the “CHAN” menu, you can switch between the channels in the frequency banks “FIX” and
“VAR”. The RF signal is deactivated while this adjustment is being made.
When changing to the setting mode of the “CHAN” menu, the current channel number appears
on the LC display panel. After approx. 1 second, the currently assigned transmission frequency
is displayed:
1 sec.
CH
CH
MHz
̄ (DOWN). The new channel number appears on the LC display panel for approx. 1 second
and then the currently assigned transmission frequency is displayed.
Only after the new setting has been stored (“STORED” has appeared on the LC display panel)
is the RF signal with the frequency of the selected channel activated.
Selecting the frequencies to be stored in the frequency bank
“VAR” – “TUNE”
Via the “TUNE” menu, you can freely select the frequencies to be stored in the frequency bank
“VAR” (variable bank). The RF signal is deactivated while this adjustment is being made.
When you have selected the frequency bank “FIX” and then select the “TUNE” menu, the
transmitter automatically switches to channel 01 of the frequency bank “VAR” and the
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjustment tips for the operating menu
The frequencies are tuneable in 5-kHz steps within a switching bandwidth of 184 MHz max.
When operating a multi-channel system, make sure to only use intermodulation-free
frequencies.
There are two options for setting the frequencies:
•
You can set a new frequency for the selected channel:
̈ In the selection mode of the “TUNE” menu, press the multi-function
SET
appears on the LC display panel and then the currently assigned
frequency is displayed.
UP
DOWN
¾
CH
position ꢀ (UP) or ̄ (DOWN).
MHz
̈ Store your setting.
MHz
•
You can change to a different channel and set a new frequency for the new channel:
SET
longer time. The current channel flashes on the LC display panel.
UP
DOWN
¾
̈ Select a new channel by sliding the multi-function switch ꢀ (UP) or
̄ (DOWN).
CH
̈ Confirm your selection by pressing the mult-function switch (switch
RF
position țSET).
CH
̈ The current frequency of the selected channel is displayed.
position ꢀ (UP) or ̄ (DOWN).
MHz
̈ Store your setting.
MHz
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjustment tips for the operating menu
Entering a name – “NAME”
Via the “NAME” menu, you can enter a freely selectable name for the transmitter. This name can
be displayed on the standard display and can consist of up to six characters such as:
•
•
•
letters (without pronounciation marks),
numbers from 0 to 9,
special characters and spaces.
After you have changed to the setting mode of the “NAME” menu, the first segment starts
SET
̄ (DOWN) to select a character.
UP
DOWN
(By sliding the switch only once, the display jumps either forwards or
backwards to the next character. If you keep the switch slid, the
display starts cycling continuously.)
¾
to the next segment.
̈ Have you entered the name completely? Press the multi-function
appears on the LC display panel.
Adjusting the microphone sensitivity – “ATTEN”
Via the “ATTEN” menu, you can adjust the transmitter’s sensitivity.
The sensitivity is correctly adjusted when the level display for audio
ቪ
signal “AF” ቪ shows full deflection only during the loudest passages
The sensitivity can be adjusted in 1-dB steps from +40 dB to –30 dB.
RF
AF
dB
The bargraph has a resolution of approx. 3 dB per segment with
a display range of 45 dB.
·
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjustment tips for the operating menu
Adjusting the bass roll-off frequency – “LOWCUT”
To reduce unwanted low-frequency noise such as wind and handling noise, you can activate a
low-cut filter. The low-cut frequency is 120 Hz.
If you do not want to reduce low-frequency signal portions, select the setting “FLAT”.
Selecting the standard display – “VIEW”
Via the “VIEW” menu, you can select one of the following standard displays:
RF
RF
RF
CH
MHz
Name
“NAME”
Transmission
frequency “FREQ”
Channel
“CHAN”
The selected standard display is shown
•
•
after switch-on,
after the menu settings have been displayed for 10 seconds in display mode.
Loading the factory-preset default settings – “RESET”
Via the “RESET” menu, you can load the factory-preset default settings. After the reset, the
standard display is shown on the LC display panel.
Function
Setting
Low-cut frequency
Microphone sensitivity
Name
“FLAT”
“0 dB”
“SK5212”
Transmission frequency
deactivated
“FIX 01”
Standard display
Autolock function
Channel
Output power
“PWR.HI”
Frequencies in the frequency bank “VAR” are reset.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
Adjustment tips for the operating menu
Activating/deactivating the automatic lock mode – “LOCK”
The transmitter has an autolock function (automatic lock mode) that can be activated or
deactivated via the “LOCK” menu. When the autolock function is activated, the lock mode is
automatically activated 10 seconds after pressing the last button. The lock mode protects the
transmitter from accidental programming.
̈ In the selection mode of the “LOCK” menu, press the multi-function
SET
UP
DOWN
The current setting of the autolock function is displayed.
¾
position ꢀ (UP) or ̄ (DOWN).
Select “LOC.ON” to activate the autolock function or select “LOC.OFF”
to deactivate the autolock function.
RF
RF
position țSET)
.
Adjusting the output power – “POWER”
The transmitter features switchable output power. With reduced output power, the operating
time increases.
In addition, you can also adjust the transmitter to “Low Intermodulation mode” (“LoI”). By so
doing, the transmitter’s intermodulation performance is significantly improved, especially in
multi-channel operation. In “Low Intermodulation mode”, the output power is reduced to
10 mW; the operating time will be about the same as using an output power of 50 mW.
Displaying the software revision – “SW--REV“
You can display the current software revision of the bodypack transmitter by calling up the
“SW-REV“ menu item.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
Cleaning the bodypack transmitter
Exiting the operating menu – “EXIT”
Via the “EXIT” menu, you can exit the operating menu and return to the standard display.
(ESC function) and return you to the standard display without saving any changes.
Cleaning the bodypack transmitter
Liquids can damage the electronics of the bodypack transmitter!
CAUTION
Liquids entering the housing of the device can cause a short-circuit and damage
the electronics.
̈ Keep all liquids away from the bodypack transmitter.
̈ Use a cloth to clean the bodypack transmitter from time to time.
̈ Do not use any solvents or cleansing agents.
Recommendations and tips
Tips for optimum reception
•
•
Transmission range depends to a large extent on location and on the selected output power.
There should be a “free line of sight” between transmitting and receiving antennas.
To avoid overloading the receiver, observe a minimum distance of 5 m between transmitting
and receiving antennas.
Tips for multi-channel operation
•
When operating a multi-channel system, make sure to only use intermodulation-free
frequencies.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
If a problem occurs ...
If a problem occurs ...
Problem
Possible cause
Possible solution
No operation
indication
Battery is flat or inserted
incorrectly
Replace the battery or check if it
is inserted correctly
Transmitter cannot be Lock mode is activated
Deactivate the lock mode
switched off/
Settings cannot be
changed
Receiver:
Transmitter and receiver are not Set transmitter and receiver to
No RF signal
on the same channel
the same channel
Transmitter is out of range
Check the squelch threshold
setting on the receiver or reduce
the distance between receiving
antenna and transmitter
Audio signal has a high Transmitter’s sensitivity is set
level of background
noise
too high
Receiver’s output level is set
too low
Increase the line output level
Audio signal is
distorted
Transmitter’s sensitivity is set
too low
Receiver’s output level is set
too high
Reduce the line output level
If a problem occurs that is not listed in the above table or if the problem cannot be solved with
the proposed solutions, please contact your local Sennheiser partner for assistance.
26
Download from Www.Somanuals.com. All Manuals Search And Download.
Accessories
Accessories
…………
…………
…………
MKE 1 clip-on microphone, omni-directional,
available in different versions
MKE 2 Gold clip-on microphone, omni-directional,
available in different versions
MKE Platinum clip-on microphone, omni-directional,
available in different versions
003876
003838
004227
004228
005301
003402
009862
009864
ME 102-ant clip-on microphone, omni-directional, anthracite
ME 102-ni clip-on microphone, omni-directional, nickel
ME 104-ant clip-on microphone, cardioid, anthracite
ME 104-ni clip-on microphone, cardioid, nickel
ME 105-ant clip-on microphone, super-cardioid, anthracite
ME 105-ni clip-on microphone, super-cardioid, nickel
HSP 2 headmic, omni-directional
HSP 4 headmic, cardioid
27
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Specifications
Modulation
wideband FM
Frequency ranges
range L:
470 to 638 MHz
range N:
614 to 798 MHz
range N-US:
614.075 to 697.925 MHz
range N-GB:
606 to 790 MHz
range P:
776 to 866 MHz
Switching bandwidth
up to 184 MHz
Transmission frequencies
frequency bank “FIX” with up to 59 factory-preset
frequencies
frequency bank “VAR” with 20 freely selectable
frequencies (frequencies tuneable in steps of 5 kHz)
RF output power
switchable,
typ.: 50 mW (PWR.HI)
10 mW (PWR.LO)
10 mW (PWR.LoI)
Frequency stability
±10 ppm in the specified temperature range
±40 kHz/±56 kHz
Nominal/peak deviation
Signal-to-noise ratio
typ. 110 dB(A)
rms
THD
(at 1 kHz, nominal deviation)
<
0.3%
AF frequency response
Noise reduction system
60 to 20,000 Hz
Sennheiser HiDynplus™
Input sensitivity at
nominal deviation
–40 dBu = 7.75 mV
Low-cut frequency (–3 dB)
Sensitivity
adjustable (flat, 120 Hz)
adjustable in steps of 1 dB from –30 to +40 dB
28
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Power consumption
PWR.LO: approx. 150 mA (10 mW) at 1.5 V
(without LC display illumination)
PWR.HI: approx. 220 mA (50 mW) at 1.5 V
PWR.LoI: approx. 220 mA (10 mW) at 1.5 V
Operating time
Connections
PWR.LO: approx. 10 hrs
PWR.HI: approx. 5.5 hrs
PWR.LoI: approx. 5.5 hrs
AF: 3-pin special audio socket
RF: coax socket
Dimensions
Weight
approx. 53 x 60 x 17 mm
approx. 124 g incl. battery and antenna
Operating conditions
Ambient temperature
Relative humidity
Power supply
–10°C to +55°C
max. 90% (non condensing)
1 AA size battery, 1.5 V
Storage and transport conditions
Ambient temperature
Relative humidity
Shock test
–25°C to +70°C
max. 90%
shock test according to IEC 68 or EN 60068, T2-27
In compliance with
Europe:
EMC
EN 301489-1/-9
Radio EN 300422-1/-2
Safety EN 60065
EN 62311 (SAR)
29
Download from Www.Somanuals.com. All Manuals Search And Download.
Specifications
Approved by
Canada
Industry Canada RSS-123
IC: 2099A-SK5212A2
limited to 698 MHz
USA
FCC-Part 74
FCC ID: DMOSK5212A2
limited to 698 MHz
Pin assignment of microphone socket
AF socket
Pin 1:
Pin 2:
+5.2 V for external special microphones
3
AF and 5.2 V AB-powering; 8.2 kΩ internal resistance, optimized
for Sennheiser pre-polarized condenser microphones.
1
2
Pin 3 and
thread:
ground
Audio sensitivity
The transmitter’s audio sensitivity can be adjusted over a range of 70 dB (+40 dB to –30 dB) in
steps of 1 dB. The diagram below shows the sensitivity range of the SK 5212-II in comparison to
the earlier product generations SK 50 and SK 5012.
SK 50
SK 5012
SK 5212-II
40
42
36
30
24
18
12
6
24
16
8
1
0...42 dB
8
16
–16...+24 dB
30
–30...+40 dB
Switch position
30
Download from Www.Somanuals.com. All Manuals Search And Download.
Manufacturer Declarations
Manufacturer Declarations
Warranty
Sennheiser electronic GmbH & Co. KG gives a warranty of 24 months on this product.
your Sennheiser partner.
In compliance with
•
•
RoHS Directive (2002/95/EC)
Battery Directive (2006/66/EC)
The supplied batteries or rechargeable batteries can be recycled. Please dispose of
them as special waste or return them to your specialist dealer. In order to protect the
environment, only dispose of exhausted batteries.
CE Declaration of Conformity
0682
•
•
R&TTE Directive (1999/5/EC)
operation, please observe the respective country-specific regulations.
Statements regarding FCC and Industry Canada
This device complies with Part 15 of the FCC Rules and with RSS-123 of Industry Canada.
Operation is subject to the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions,
may cause harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by turning the equipment
off and on, the user is encouraged to try to correct the interference by one or more of the
following measures:
31
Download from Www.Somanuals.com. All Manuals Search And Download.
Manufacturer Declarations
•
•
•
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which the receiver is
connected.
•
Consult the dealer or an experienced radio/TV technician for help.
This class B digital device complies with the Canadian ICES-003.
Changes or modifications made to this equipment not expressly approved by Sennheiser
electronic Corp. may void the FCC authorization to operate this equipment.
Before putting the device into operation, please observe the respective country-specific
regulations!
32
Download from Www.Somanuals.com. All Manuals Search And Download.
|