USB 3.0 Multi Card Reader
Quick Installation Guide
Introduction
The USB 3.0 Multi Card Reader is the perfect
choice for computer users looking for a flash
memory card reader/writer that's easy to carry
and supports multi-format flash memory cards.
Key Features and Benefits
•
•
•
Supports SuperSpeed USB 3.0 data transfer
rate up to 5Gb/s
Compliant with Universal Serial Bus 3.0
Specification
Supports SDXC and MSXC up to 2TB
System Requirements
•
Notebook or desktop PC with an available
USB port (USB 3.0 recommended)
Windows® 8 (32-/64-bit) / 7 (32-/64-bit) /
Vista (32-/64-bit) / XP (32-/64-bit) / Server
2003 & 2008 (32-/64-bit) / Server 2008 R2
•
04-0698B
1
Download from Www.Somanuals.com. All Manuals Search And Download.
LEDActivity
•
•
Power LED (Blue)
Activity LED (Red)
Note: The activity LED will also lit up
when a memory card is inserted. It flashes
when accessed.
Installation
Important: The USB 3.0 Multi Card Reader only
works at USB 3.0 speed when connected to a USB
3.0 controller. Otherwise it will work as a USB
2.0 or USB 1.1 card reader when connected to
USB 2.0 or USB 1.1 controller respectively.
In order for the USB 3.0 Multi Card Reader to
work as a USB 3.0 card reader, the driver for your
existing USB 3.0 host controller has to be properly
installed. This card reader will automatically be
detected and installed when connected to the
USB 3.0 port.
1.
Connect one end of the USB cable to the
card reader.
2.
Connect the other end to a USB port of the
computer.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
InsertingMemoryCards
Inserting memory card with top label facing
down and the gold pins facing up:
•
microSD / miniSD / SD / SDHC / MS
Micro (M2) / xD / MMC
Inserting memory card with the top label facing
up and the gold pins facing down.
•
Memory Stick Pro / Memory Stick Duo /
Memory Stick Pro Duo / CF / MD
AccessingMemoryCards
WhentheUSB3.0MultiCardReader issuccessfully
installed, five Removable Disk icons appear in
Computer or My Computer. To access any one
drive, double click the icon that corresponds to
the memory card.
Do4wnload from Www.Somanuals.com. All Manuals Search And Download.
Windows 8 / 7 / Server 2008 R2
Removable Disk won't appear in Computer
until you insert a memory card into the card
reader. However, if you want all five disk icons
to appear follow the direction below.
1.
2.
Click Start menu, then click Control Panel.
Change the View by Category to Small
icons. It is located on the upper right side
of your screen. Skip this step if Small icons
is already selected.
3.
4.
5.
Double click Folder Options.
Click View tab.
Uncheck Hide empty drives in the
computer folder, then click OK.
RemovingMemoryCards
Memory cards can be removed at any time.
However, to prevent data loss, data corruption
ormemorycardfailure,DONOTremovememory
cards while the Activity LED is flashing.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
UnpluggingtheCardReader
Please follow the steps below to safely remove the
USB 3.0 Multi Card Reader from the computer.
Windows 8 / 7 / Vista / XP / Server 2003 &
2008 / Server 2008 R2
1.
2.
3.
Click the Safely Remove Hardware icon
located in the taskbar by the system clock.
Click Safely Remove USB Mass Storage
Device....
When the Safe To Remove Hardware box
pops up, the reader/writer can be removed.
Do6wnload from Www.Somanuals.com. All Manuals Search And Download.
TechnicalSupportandWarranty
QUESTIONS? SIIG’s Online Support has answers! Simply visit our web site at
new drivers and solutions. Answers to your questions could be just a few clicks away.
You can also submit questions online and a technical support analyst will promptly
respond.
SIIG offers a 5-year manufacturer warranty with this product. This warranty covers the
original purchaser and guarantees the product to be free of any defects in materials or
workmanship for five (5) years from the date of purchase of the product.
SIIG will, at our discretion, repair or replace (with an identical product or product
having similar features and functionality) the product if defective in materials or
workmanship. This warranty gives you specific legal rights, and you may also have other
rights which vary from state to state. Please see our web site for more warranty details.
If you encounter any problems with this product, please follow the procedures below.
A) If it is within the store's return policy period, please return the product to the store
where you purchased from.
B) If your purchase has passed the store's return policy period, please follow the steps
below to have the product repaired or replaced.
Step 1: Submit your RMA request.
to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request
will be processed, if the product is determined to be defective, an RMA number will
be issued.
Step 2: After obtaining an RMA number, ship the product.
•
Properly pack the product for shipping. All accessories that came with the
original package must be included.
•
Clearly write your RMA number on the top of the returned package. SIIG will
refuse to accept any shipping package, and will not be responsible for a product
returned without an RMA number posted on the outside of the shipping
carton.
•
•
You are responsible for the cost of shipping to SIIG. Ship the product to the
followingaddress:
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
RMA #:
SIIG will ship the repaired or replaced product via Ground in the U.S. and
International Economy outside of the U.S. at no cost to the customer.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
About SIIG, Inc.
Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity
solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB,
and legacy I/O adapters) that bridge the connection between Desktop/
Notebooksystemsandexternalperipherals. SIIGcontinuestogrowbyadding
A/V and Digital Signage connectivity solutions to our extensive portfolio.
SIIGproductsoffercomprehensiveusermanuals,manyuser-friendlyfeatures,
andarebackedbyanextensivemanufacturerwarranty. Highqualitycontrol
standards are evident by the overall ease of installation and compatibility of
ourproducts,aswellasoneofthelowestdefectivereturnratesintheindustry.
SIIG products can be found in computer retail stores, mail order catalogs,
throughmajordistributors,systemintegrators,andVARsintheAmericasand
theUK,andthroughe-commercesites.
PRODUCT NAME
USB 3.0 Multi Card Reader
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE
FCCCOMPLIANCESTATEMENT:
This device complies with part 15 of the FCC Rules. Operation is subject
to the following two conditions: (1) This device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE
SIIG, Inc.
6078 Stewart Avenue
Fremont, CA 94538-3152, USA
Phone: 510-657-8688
USB 3.0 Multi Card Reader is a trademark of SIIG, Inc. SIIG and the SIIG logo are registered
trademarks of SIIG, Inc. Microsoft and Windows are registered trademarks of Microsoft
Corporation. All other names used in this publication are for identification only and may be
trademarks of their respective owners.
October, 2012
Copyright © 2012 by SIIG, Inc. All rights reserved.
Download from Www.Somanuals.com. All Manuals Search And Download.
|