SIIG TV Cables 04 0755A User Manual

4x2 HDMI Matrix Switch  
with 3DTV Support  
Quick Installation Guide  
Introduction  
The 4x2 HDMI Matrix Switch with 3DTV Support  
allows any four HDMI sources to be displayed on  
any two displays and routes high definition video  
in multiple resolutions up to 1080p plus multi-  
channel audio.  
Key Features and Benefits  
HDMI and HDCP compliant  
Support 1080p with 3DTV support  
Support standard, DSD and HD (HBR)  
audio  
Package Contents  
4x2 HDMI Matrix Switch with 3DTV  
support  
Power adapter  
IR remote control & 4 rubber pads  
Quick installation guide  
04-0755A  
1
Download from Www.Somanuals.com. All Manuals Search And Download.  
S/PDIF Out  
HDMI In 4  
HDMI In 3  
HDMI In 2  
HDMI In  
HDMI Out 2  
USB port  
HDMI Out 1  
Power jack  
Figure 2 Rear Panel Layout  
USB port: For firmware update only  
Power jack: Connects to the included power  
adapter  
HDMI Output (1-2): Connects to your  
HDMI displays via HDMI cables (cables not  
included)  
HDMI Input (1-4): Connects to your HDMI  
source's HDMI output via HDMI cables  
(cables not included)  
S/PDIF out: Extracts audio signal from  
HDMI output 1  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
IRRemoteControl  
Output 1 select  
Output 2 select  
Power  
Figure 3: IR Remote Control  
Output 1 select: Select HDMI input 1, 2, 3 or  
4 for Output 1  
Output 2 select: Select HDMI input 1, 2, 3 or  
4 for Output 2  
Power: Press the button to power on/off  
the switch  
Do4wnload from Www.Somanuals.com. All Manuals Search And Download.  
HardwareInstallation  
1.  
2.  
Power off all source devices and displays.  
Connect up to 4 HDMI source devices to the  
switch's HDMI input ports using HDMI  
cables (cables not included).  
3.  
Connect up to 2 HDMI displays to the  
switch's HDMI output ports using HDMI  
cables (cables not included).  
4.  
5.  
6.  
Plug the power adapter into the switch's  
Power jack.  
Plug the power adapter into a reliable power  
outlet.  
Power on the switch and ensure the switch's  
power LED is lit.  
7.  
8.  
Poweronalldevicesconnectedtotheswitch.  
The switch is now ready for use.  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Operation  
Use the front panel push buttons or the IR Remote  
Control to select the sources and displays.  
Front Panel Push Button Selection  
See descriptions and instructions on page 2.  
IR Remote Control Selection  
See descriptions and instructions on page 2.  
Do6wnload from Www.Somanuals.com. All Manuals Search And Download.  
TechnicalSupportandWarranty  
QUESTIONS? SIIGs Online Support has answers! Simply visit our web site at  
www.siig.com and click Support. Our online support database is updated daily with  
new drivers and solutions. Answers to your questions could be just a few clicks away.  
You can also submit questions online and a technical support analyst will promptly  
respond.  
SIIG offers a 3-year manufacturer warranty with this product. This warranty covers the  
original purchaser and guarantees the product to be free of any defects in materials or  
workmanship for three (3) years from the date of purchase of the product.  
SIIG will, at our discretion, repair or replace (with an identical product or product  
having similar features and functionality) the product if defective in materials or  
workmanship. This warranty gives you specific legal rights, and you may also have other  
rights which vary from state to state. Please see our web site for more warranty details.  
If you encounter any problems with this product, please follow the procedures below.  
A) If it is within the store's return policy period, please return the product to the store  
where you purchased from.  
B) If your purchase has passed the store's return policy period, please follow the steps  
below to have the product repaired or replaced.  
Step 1: Submit your RMA request.  
Gotowww.siig.com, click Support,then REQUESTAPRODUCTREPLACEMENT  
to submit a request to SIIG RMA or fax a request to 510-657-5962. Your RMA request  
will be processed, if the product is determined to be defective, an RMA number will  
be issued.  
Step 2: After obtaining an RMA number, ship the product.  
Properly pack the product for shipping. All accessories that came with the  
original package must be included.  
Clearly write your RMA number on the top of the returned package. SIIG will  
refuse to accept any shipping package, and will not be responsible for a product  
returned without an RMA number posted on the outside of the shipping  
carton.  
You are responsible for the cost of shipping to SIIG. Ship the product to the  
followingaddress:  
SIIG, Inc.  
6078 Stewart Avenue  
Fremont, CA 94538-3152, USA  
RMA #:  
SIIG will ship the repaired or replaced product via Ground in the U.S. and  
International Economy outside of the U.S. at no cost to the customer.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
About SIIG, Inc.  
Founded in 1985, SIIG, Inc. is a leading manufacturer of IT connectivity  
solutions (including Serial ATA and Ultra ATA Controllers, FireWire, USB,  
and legacy I/O adapters) that bridge the connection between Desktop/  
Notebooksystemsandexternalperipherals. SIIGcontinuestogrowbyadding  
A/V and Digital Signage connectivity solutions to our extensive portfolio.  
SIIGproductsoffercomprehensiveusermanuals,manyuser-friendlyfeatures,  
andarebackedbyanextensivemanufacturerwarranty. Highqualitycontrol  
standards are evident by the overall ease of installation and compatibility of  
ourproducts,aswellasoneofthelowestdefectivereturnratesintheindustry.  
SIIG products can be found in computer retail stores, mail order catalogs,  
throughmajordistributors,systemintegrators,andVARsintheAmericasand  
theUK,andthroughe-commercesites.  
PRODUCT NAME  
4 x 2 HDMI Matrix Switch with 3DTV Support  
FCC RULES: TESTED TO COMPLY WITH FCC PART 15, CLASS B  
OPERATING ENVIRONMENT: FOR HOME OR OFFICE USE  
FCCCOMPLIANCESTATEMENT:  
This device complies with part 15 of the FCC Rules. Operation is subject  
to the following two conditions: (1) This device may not cause harmful  
interference, and (2) this device must accept any interference received,  
including interference that may cause undesired operation.  
THE PARTY RESPONSIBLE FOR PRODUCT COMPLIANCE  
SIIG, Inc.  
6078 Stewart Avenue  
Fremont, CA 94538-3152, USA  
Phone: 510-657-8688  
4 x 2 HDMI Matrix Switch with 3DTV Support is a trademark of SIIG, Inc. SIIG and the SIIG  
logo are registered trademarks of SIIG, Inc. All other names used in this publication are for  
identification only and may be trademarks of their respective owners.  
January, 2012  
Copyright © 2012 by SIIG, Inc. All rights reserved.  
Download from Www.Somanuals.com. All Manuals Search And Download.  

Sennheiser Microphone e838 User Manual
Sonic Blue DVD Player DVR4400 User Manual
Sony Microcassette Recorder M 335 User Manual
Sony Portable Speaker Walkman CD User Manual
Sony Power Supply NP FX101 User Manual
SOYO Car Video System M17GS User Manual
Speco Technologies Security Camera CVC 7WMTD User Manual
Star Micronics Printer NX 2450 User Manual
Sterling Dehumidifier STT 110 User Manual
Sylvania TV VCR Combo 6313CE User Manual