Owner’s Manual
!
WARNING
Exercise can present a
health risk. Consult a
physician before beginning
any exercise program with
this equipment. If you feel
faint or dizzy, immediately
discontinue use of this
equipment. Serious bodily
injury can occur if this
equipment is not assembled
and used correctly. Serious
bodily injury can also occur
if all instructions are not
followed. Keep others and
pets away from equipment
when in use. Always make
sure all bolts and nuts are
securely tightened prior to
each use. Follow all safety
instructions in this manual.
When calling for parts or
service, please specify
the following number:
Product May Vary Slightly From Pictured.
Model#: 35-1215B
CAUTION:
Weight on this product should not exceed 250 lbs.
This Product is Distributed Exclusively by
STAMINA PRODUCTS
MADE IN TAIWAN
2040 N. Alliance, Springfield, MO 65803
Customer Service
2011 Stamina Products, Inc.
2011, 06
©
1 (800) 375-7520
Download from Www.Somanuals.com. All Manuals Search And Download.
Call Us First
1C(8us0t0om)3er7S5e-r7v5ic2e0
THANK YOU FOR PURCHASING THE
1215 Orbital Rower
To enact your warranty, please register your product
by going to register.staminaproducts.com
To help you get started, we have pre-assembled most of your
1215 Orbital Rower at the factory with the exception
of those few parts left unassembled for shipping purposes.
Simply follow the few assembly instructions set forth in this manual.
With regular workouts, you will be getting your body into shape
and be on your way to achieving a happier and healthier lifestyle.
Should you have any questions,
please call our Customer Service Department toll-free number,
1 (800) 375-7520
Monday - Thursday, 7:30 A.M. - 5:00 P.M., Central Time.
Friday, 8:00 A.M. - 3:00 P.M., Central Time.
ONLINE
TELEPHONE
FAX
MAIL
CUSTOMER SERVICE
CUSTOMER SERVICE
Tel: 1 (800) 375-7520
CUSTOMER SERVICE
Fax: (417) 889-8064
STAMINA PRODUCTS, INC.
ATTN: Customer Service
P.O. Box 1071
Springfield, MO. 65801-1071
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BEFORE YOU BEGIN
Thank you for choosing the 1215 Orbital
Although Stamina constructs its products with
Rower. We take great pride in producing this the finest materials and uses the highest standards
quality product and hope it will provide many hours of manufacturing and quality control, there can
of quality exercise to make you feel better, look sometimes be missing parts or incorrectly sized
better, and enjoy life to its fullest.
parts. If you have any questions or problems with
It's a proven fact that a regular exercise program the parts included with your 1215 Orbital Rower,
can improve your physical and mental health. please do not return the product. Contact us
Too often, our busy lifestyles limit our time and FIRST!
opportunity to exercise. The 1215 Orbital Rower
If a part is missing or defective, please go to
provides a convenient and simple method to begin staminaproducts.com to the Services section and
your assault on getting your body in shape and order the part needed, or call us toll free at 1-800-
achieving a happier and healthier lifestyle.
375-7520 (in the U.S.). Our Customer Service Staff
Before reading further, please review the is available to assist you from 7:30 A.M. to 5:00 P.M.
drawing below and familiarize yourself with the (Central Time) Monday through Thursday and 8:00
parts that are labeled.
Read this manual carefully before using the
1215 Orbital Rower.
A.M. to 3:00 P.M. (Central Time) on Friday.
Be sure to have the name and model number of
the product available when you contact us.
Foam Grip
Shock Decal
Left Handlebar
Pedal Strap
Meter
Shock
Locking Knob
Pedal
Foam Grip
Left Base Frame
Right
Handlebar
Endcap
Seat
Shock Decal
Caution
Label
Pivot Support
Shock
Locking Knob
Rear
Support
Right Base Frame
Center Beam
Endcap
Pull Pin
THE FOLLOWING TOOLS ARE REQUIRED FOR ASSEMBLY :
Phillips Screwdriver
Adjustable Wrench
Adjustable Wrench
4
Download from Www.Somanuals.com. All Manuals Search And Download.
EQUIPMENT WARNING, CAUTION & NOTICE LABELS
This chart is provided to help identify the warning, caution, and notice labels on the 1215 Orbital
Rower. Please take a moment to familiarize yourself with all of the warning, caution, and notice
labels.
Labels are larger than actual size
C1 CAUTION LABEL(60)
D1 SHOCK DECAL(18)
(2 locations)
5
Download from Www.Somanuals.com. All Manuals Search And Download.
HARDWARE IDENTIFICATION CHART
This chart is provided to help identify the hardware used in the assembly process. Place the washers or
the ends of the bolts or screws on the circles to check for the correct diameter. Use the small scale to
check the length of the bolts and screws.
3/16"
1/4"
5/16"
3/8"
1/2"
INCHES
0
0
1/2
1
1/2
2
1/2
3
1/2
4
1/2
5
1/2
6
in.
mm.
10 20 30 40 50 60 70 80 90 100 110 120 130 140 150
length
MILLIMETERS
6
8
10
12
NOTICE: The length of all bolts and screws, except those with flat
heads, is measured from below the head to the end of the bolt
or screw. Flat head bolts and screws are measured from the
top of the head to the end of the bolt or screw.
length
After unpacking the unit, open the hardware bag and make sure that you have all the following items.
Some hardware may be already attached to the part.
Part No. and Description
Qty
43
Bolt, Hex Head (M8 x 1.25 x 16mm)
8
44
45
Bolt, Hex Head (M8 x 1.25 x 40mm)
Bolt, Hex Head (M8 x 1.25 x 55mm)
4
2
46
48
Bolt, Hex Head (M10 x 1.5 x 95mm)
Screw, Round Head (M4 x 10mm)
1
2
51
52
Nylock Nut (M8 x 1.25)
Nylock Nut (M10 x 1.25)
6
1
53
Acorn Nut (M10 x 1.25)
2
55
56
Lock Washer (M8)
Lock Washer (M10)
8
2
57
58
Washer (M8)
Washer (M10)
6
2
6
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
Place all parts from the box in a cleared area and position them on the floor in front of you. Remove
all packing materials from your area and place them back into the box. Do not dispose of the packing
materials until assembly is completed. Read each step carefully before beginning. If you are missing
a part, please go to staminaproducts.com to the Services section and order the part needed, e-mail
us at [email protected], or call us toll free at 1-800-375-7520 (in the U.S.). Our
Customer Service Staff is available to assist you from 7:30 A.M. to 5:00 P.M. (Central Time) Monday
through Thursday and 8:00 A.M. to 3:00 P.M. (Central Time) on Friday.
STEP 1
Insert the PEDAL SHAFT(21) through holes located on the front end of the CENTER BEAM(1). Place
a SPACER(22) and a PEDAL(23) onto each end of the PEDAL SHAFT(21) and slide them toward the
CENTER BEAM(1). Then secure the PEDALS(23) with WASHERS(M10)(58), LOCK WASHERS (M10)
(56), and ACORN NUTS(M10x1.5)(53) at both sides of the PEDAL SHAFT(21).
NOTE: You need to use two wrenches to tighten the ACORN NUTS(M10x1.5)(53) at both ends of the
PEDAL SHAFT(21) at the same time.
STEP 2
Insert the PEDAL STRAPS(24) into the slots in the bottom of the PEDALS(23). When feet are in the
PEDALS(23), the ends of the PEDAL STRAPS(24) will be facing away from the CENTER BEAM(1) as
shown above.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
NOTE: Lay your partially assembled 1215 Orbital Rower upside down to complete STEP 3 and 4.
STEP 3
Place the LEFT and RIGHT BASE FRAMES(2, 3) on the CENTER BEAM(1), connect them with the two
MOUNTING BRACKETS(4), and secure with HEX BOLTS(M8x1.25x16mm)(43) and LOCK WASHERS(M8)
(55).
STEP 4
Attach the REAR SUPPORT(16) to the SUPPORT BRACKET(15) with HEX BOLT(M10x1.5x95mm)(46)
and NYLOCK NUT(M10x1.5)(52). Lock the REAR SUPPORT(16) in position by inserting the PULLING
PIN(17) through the holes in the SUPPORT BRACKET(15) and REAR SUPPORT(16).
8
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
STEP 5
Attach the LEFT HANDLEBAR(8) to the bracket located on the rear of the LEFT BASE FRAME(2) with
HEX BOLT(M8x1.25x55mm)(45), WASHER(M8)(57), and NYLOCK NUT(M8x1.25)(51).
STEP 6
Attach the SHOCK(14) to the bracket located on the front of the LEFT BASE FRAME(2) with HEX BOLT
(M8x1.25x40mm)(44), WASHER(M8)(57), and NYLOCK NUT(M8x1.25)(51). Make sure you assembled
the shock allowing the shock to extend toward the LEFT HANDLEBAR(8). Connect the other end of the
SHOCK(14) to the TENSION ADJUSTER(12) with HEX BOLT (M8x1.25x40mm)(44), WASHER(M8)(57),
and NYLOCK NUT(M8x1.25)(51).
Repeat the above to attach the RIGHT HANDLEBAR(9) and SHOCK(14) to the RIGHT BASE FRAME(3).
9
Download from Www.Somanuals.com. All Manuals Search And Download.
ASSEMBLY INSTRUCTIONS
STEP 7
Slide the SEAT(25) onto the CENTER BEAM(1). Insert the STOPPER BOLT(20) through the CENTER
BEAM(1) and lock in position by screwing on the STOPPER(19). Also, please verify that the other
STOPPER BOLT(20) and STOPPER(19) have already been assembled at the factory. If it has not been
pre-assembled, then please assemble at this time. Press the CENTER BEAM CAP(28) into the back end
of the CENTER BEAM(1).
STEP 8
Pry the METER(30) from the CONSOLE(31). Attach the CONSOLE(31) to the CENTER BEAM(1) with
ROUND HEAD SCREWS(M4x10mm)(48).
STEP 9
Install anAAbattery into the METER(30), one battery included. See page 12 for detailed battery installation
instructions. Run the connection wire of the METER(30) through the square hole on the CONSOLE(31).
Place the METER(30) back into the CONSOLE(31). Plug the connection wire of the METER(30) into the
socket located at the front end of the CENTER BEAM(1).
SOCKET
(Assembled at the factory)
10
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONAL INSTRUCTIONS
LOAD ADJUSTMENT
The resistance of the shocks can be adjusted by sliding the TENSION ADJUSTERS(12) to change the
position on the HANDLEBARS(8, 9). The lowest position will provide the lowest resistance, the upper
position will provide the higher resistance.
Loosen the LOCKING KNOB(13) and slide the TENSION ADJUSTER(12) to aspired position. Tighten the
LOCKING KNOB(13) after adjusting. Use the number marks on the HANDLEBARS(8, 9) to help set the
TENSION ADJUSTER(12) at the same height on both sides.
NOTE: Tighten LOCKING KNOBS(13) securely before using the 1215 Orbital Rower.
CAUTION: The shocks get HOT after a few minutes of use. To avoid burns, do not touch the shock until
it has time to cool.
TO ADJUST THE REAR SUPPORT(16)
Pull out the PULL PIN(17) from the SUPPORT BRACKET(15). Fold the REAR SUPPORT(16) forward,
then you can set the 1215 Orbital Rower flat on the floor. Lock the SUPPORT BRACKET(15) in the flat
position by inserting the PULL PIN(17) back into the SUPPORT BRACKET(15). Refer to illustration B.
The seat can slide freely when the 1215 Orbital Rower is in the flat position. In the incline position as shown
in illustration A, there will be more resistance as you slide backward, less resistance as you slide forward.
A.
B.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
OPERATIONAL INSTRUCTIONS
USING THE FITNESS METER
Seat movement or press the BUTTON.
POWER ON :
POWER OFF :
Automatic shut off after four minutes of inactivity.
FUNCTION BUTTON:
Press the button to select functions. Reset all functions to zero by
pressing the button and holding it down for four seconds.
FUNCTION MARKS ( On The Display ) :
A : Scan
CO : Count
CA : Calories
M : Mile
S : Speed
D : Distance
T : Timer
:
Signal Mark
FUNCTIONS:
SCAN: Press the button until “A” appears in the display. Automatically scans SPEED, DISTANCE,
TIMER, COUNT, and CALORIES in sequence with change every four seconds.
SPEED: Press the button until “S” appears to display the current speed, from zero to 71 miles per hour.
DISTANCE: Press the button until “D” appears to display the distance you are travelling, from zero to
99.99 miles.
NOTE: The distance shown is calculated by the length that the seat travels along the center
beam and should be used for comparative purposes between workouts.
TIMER: Press the button until “T” appears to display the rowing time, from one second up to 99:59
minutes.
COUNT: Press the button until “CO” appears to display the total number of rows you have taken, from
zero to 9999 rows.
CALORIES: Press the button until “CA” appears to display the calorie consumption, from zero to 999.9
K cal.
NOTE: The calorie readout is an estimate for an average user. It should be used only as a
comparison between workouts on this unit.
AA Battery
HOW TO INSTALL AND REPLACE BATTERY:
1. Use hand or simple tool to pry the METER(30) from the CONSOLE
(31).
2. The meter operates with an AA battery. Refer to the illustration to
install or replace the battery.
NOTE:
1. Rechargeable batteries are not recommended.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
STORAGE
1. To store the 1215 Orbital Rower, simply keep it in a clean dry place.
2. Fold The REAR SUPPORT(16) for easy storage, refer to page 11.
3. Grasp the Front and Rear Stabilizer to move the 1215 Orbital Rower. Do not use the Seat to move
the 1215 Orbital Rower. The Seat will move and the Seat Carriage may pinch your hand or fingers.
4. To avoid damage to the electronics, remove the batteries before storing the 1215 Orbital Rower for
one year or more.
MAINTENANCE
The safety and integrity designed into the 1215 Orbital Rower can only be maintained when the 1215
Orbital Rower is regularly examined for damage and wear. Special attention should be given to the
following:
1. Pull on the HANDLEBARS(8, 9) and verify that the SHOCKS(14) provide tension. The SHOCKS(14)
should provide many years of use.
2. Clean the roller tracks in the CENTER BEAM(1) with an absorbent cloth.
3. Verify that all nuts and bolts are present and properly tightened. Replace missing nuts and bolts.
Tighten loose nuts and bolts.
4. Verify that the CAUTION LABEL(60) is in place and easy to read. Call Stamina Products immediately
at 1-800-375-7520 for a replacement CAUTION LABEL(60) if it is missing or damaged.
5. It is the sole responsibility of the user/owner to ensure that regular maintenance is performed.
6. Worn or damaged components shall be replaced immediately or the 1215 Orbital Rower removed
from service until repair is made.
7. Only Stamina Products supplied components shall be used to maintain/repair the 1215 Orbital
Rower.
8. Keep your 1215 Orbital Rower clean by wiping it off with an absorbent cloth after use.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
CONDITIONING GUIDELINES
How you begin your exercise program depends on your physical condition. If you have been inactive for
several years or are severely overweight, start slowly and increase your workout time gradually. Increase
your workout intensity gradually by monitoring your heart rate while you exercise.
Remember to follow these essentials:
Have your doctor review your training and diet programs.
Begin your training program slowly with realistic goals that have been set by you and your physician.
Warm up before you exercise and cool down after you work out.
Take your pulse periodically during your workout and strive to stay within a range of 60% (lower
intensity) to 90% (higher intensity) of your maximum heart rate zone. Start at the lower intensity, and
build up to higher intensity as you become more aerobically fit.
If you feel dizzy or lightheaded you should slow down or stop exercising.
Initially you may only be able to exercise within your target zone for a few minutes; however, your aerobic
capacity will improve over the next six to eight weeks. It is important to pace yourself while you exercise
so you don't tire too quickly.
To determine if you are working out at the correct intensity, use a heart rate monitor or use the table
below. For effective aerobic exercise, your heart rate should be maintained at a level between 60%
and 90% of your maximum heart rate. If just starting an exercise program, work out at the low end of
your target heart rate zone. As your aerobic capacity improves, gradually increase the intensity of your
workout by increasing your heart rate.
Measure your heart rate periodically during your workout by stopping the
exercise but continuing to move your legs or walk around. Place two or
three fingers on your wrist and take a six second heartbeat count. Multiply
the results by ten to find your heart rate. For example, if your six second
heartbeat count is 14, your heart rate is 140 beats per minute. A six second
wrist pulse
count is used because your heart rate will drop rapidly when you stop
exercising. Adjust the intensity of your exercise until your heart rate is at the
proper level.
Target Heart Rate Zone Estimated by Age*
Target Heart Rate Zone
(55%-90% of Maximum Heart Rate)
Average Maximum
Heart Rate 100%
Age
20 years
25 years
30 years
35 years
40 years
45 years
50 years
55 years
60 years
65 years
70 years
110-180 beats per minute
107-175 beats per minute
105-171 beats per minute
102-166 beats per minute
99-162 beats per minute
97-157 beats per minute
94-153 beats per minute
91-148 beats per minute
88-144 beats per minute
85-139 beats per minute
83-135 beats per minute
200 beats per minute
195 beats per minute
190 beats per minute
185 beats per minute
180 beats per minute
175 beats per minute
170 beats per minute
165 beats per minute
160 beats per minute
155 beats per minute
150 beats per minute
* For cardiorespiratory training benefits, the American College of Sports Medicine recommends
working out within a heart rate range of 55% to 90% of maximum heart rate. To predict the
maximum heart rate, the following formula was used: 220 - Age = predicted maximum heart rate
14
Download from Www.Somanuals.com. All Manuals Search And Download.
WARM-UP and COOL-DOWN
The purpose of warming up is to prepare your body for exercise and to minimize injuries.
Warm-Up
Warm up for two to five minutes before strength training or aerobic exercising. Perform activities that
raise your heart rate and warm the working muscles. Activities may include brisk walking, jogging,
jumping jacks, jump rope, and running in place
Stretching while your muscles are warm after a proper warm-up and again after your
Stretching
strength or aerobic training session is very important. Muscles stretch more easily at these times
because of their elevated temperature, which greatly reduces the risk of injury. Stretches should be held
for 15 to 30 seconds. Do not bounce.
Suggested Stretching Exercises
Lower Body Stretch
Place feet shoulder-width
apart and lean forward.
Keep this position for 30
seconds using the body as a
natural weight to stretch the
backs of the legs.
Floor Stretch
While sitting on the floor,
open the legs as wide as
possible. Stretch the upper
body toward the knee on the
right leg by using your arms
to pull your chest to your
thighs. Hold this stretch 10
to 30 seconds.
DO NOT BOUNCE!
When the pull on the back of
the legs lessens, gradually
try a lower position.
DO NOT BOUNCE!
Do this stretch 10 times.
Repeat the stretch with the
left leg.
Bent Torso Pulls
Bent Over Leg Stretch
Stand with feet shoulder-
width apart and lean forward
as illustrated. Using the
arms, gently pull the upper
body towards the right leg.
Let the head hang down.
DO NOT BOUNCE!
While sitting on the floor,
have legs apart, one leg
straight and one knee bent.
Pull the chest down to touch
the thigh on the leg that is
bent, and twist at the waist.
Hold this position at least 10
seconds. Repeat 10 times
on each side.
Hold the position a minimum
of 10 seconds. Repeat
pulling the upper body to
the left leg. Do this stretch
several times slowly.
Remember to always check with your physician before starting any exercise program.
The purpose of cooling down is to return the body to its normal, or near normal, resting
Cool-Down
state at the end of each exercise session. A proper cool-down slowly lowers your heart rate and allows
blood to return to the heart. Your cool-down should include the stretches listed above and should be
completed after each strength training session.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
PART#
PART NAME
QTY
1
2
3
4
5
6
7
8
Center Beam
1
1
1
2
2
4
2
1
1
4
2
2
2
2
1
1
1
2
2
2
1
2
2
2
1
1
4
1
1
1
1
1
1
1
1
2
2
2
2
2
4
4
8
4
2
1
4
Left Base Frame
Right Base Frame
Mounting Bracket
Pivot Support
Bushing
Shaft Tube
Left Handlebar
Right Handlebar
Bushing
Foam Grip
Tension Adjuster
Locking Knob
Shock
Support Bracket
Rear Support
Pull Pin
Shock Decal
Stopper
Stopper Bolt
Pedal Shaft
Spacer
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
Pedal
Pedal Strap
Seat
Seat Carriage
Roller
Center Beam Cap
Center Beam Cap /with hole
Meter
Console
Sensor Wire
Thin Nut
Foam Block
Magnet
Endcap (50.8mm)
Endcap (60mm)
Round Plug (25mm)
Round Plug (50mm)
Carriage Bolt (M8 x 1.25 x 45mm)
Bolt, Button Head (M8 x 1.25 x 25mm)
Bolt, Flat Head (M8 x 1.25 x 25mm)
Bolt, Hex Head (M8 x 1.25 x 16mm)
Bolt, Hex Head (M8 x 1.25 x 40mm)
Bolt, Hex Head (M8 x 1.25 x 55mm)
Bolt, Hex Head (M10 x 1.5 x 95mm)
Screw, Round Head (M6 x 1 x 25mm)
17
Download from Www.Somanuals.com. All Manuals Search And Download.
PARTS LIST
PART#
PART NAME
QTY
48
49
50
51
52
53
55
56
57
58
59
60
Screw, Round Head (M4 x 10mm)
Screw, Round Head (M4 x 16mm)
Bolt, Button Head (M8 x 1.25 x 16mm)
Nylock Nut (M8 x 1.25)
Nylock Nut (M10 x 1.25)
Acorn Nut (M10 x 1.25)
Lock Washer (M8)
Lock Washer (M10)
Washer (M8)
Washer (M10)
Manual
2
2
4
10
1
2
16
2
18
2
1
1
Caution Label
18
Download from Www.Somanuals.com. All Manuals Search And Download.
LIMITED WARRANTY
MODEL 35-1215B
WARRANTY
Stamina Products, Inc. warrants that this product will be free from defects in materials and workmanship
under normal use, service and proper operation for a period of 90 days on the parts and five years on
the frame from the date of the original purchase from an authorized retailer. THIS WARRANTY SHALL
NOT APPLY TO ANY PRODUCT WHICH HAS BEEN SUBJECT TO COMMERCIAL USE, ABUSE,
MISUSE, ALTERATION OF ANY TYPE OR CAUSE OR TO ANY DEFECT OR DAMAGE CAUSED BY
REPAIR, REPLACEMENT, SUBSTITUTION OR USE WITH PARTS OTHER THAN PARTS PROVIDED
BY STAMINA PRODUCTS, INC. Commercial use includes use of the product in athletic clubs, health
clubs, spas, gymnasiums, exercise facilities, and other public or semipublic facilities whether or not the
product's use is in furtherance of a profit making enterprise, and all other use which is not for personal,
family, or household purposes.
To implement this limited warranty, send a written notice stating your name, date, and place of purchase
and a brief description of the defect along with your receipt to Stamina Products, Inc. P.O. Box 1071,
call us at 1-800-375-7520. If the defect is covered under this limited warranty, you will be requested to
return the product or part to us for free repair or replacement at our option. NO ACTION FOR BREACH
OF THIS LIMITED WARRANTY MAY BE COMMENCED MORE THAN ONE (1) YEAR AFTER THE
DATE THE ALLEGED BREACH WAS OR SHOULD HAVE BEEN DISCOVERED. NO ACTION FOR
BREACH OF ANY IMPLIED WARRANTY MAY BE COMMENCED MORE THAN ONE (1) YEAR AFTER
DELIVERY OF THE PRODUCT TO THE PURCHASER. This limited warranty is not transferable. IF
ANY PART OF THE PRODUCT IS NOT IN COMPLIANCE WITH THIS LIMITED WARRANTY OR ANY
IMPLIED WARRANTY, THE REMEDY OF REPAIR OR REPLACEMENT IS THE EXCLUSIVE REMEDY
AVAILABLE TO YOU. In the event that the purchaser makes any claim under this limited warranty or any
implied warranty, the Warrantor reserves the right to require the product to be returned for inspection,
at the purchaser's expense, to the Warrantor's premises in Springfield, Missouri. Return of the enclosed
warranty registration card is not required for warranty coverage, but is merely a way of establishing the
date and place of purchase.
Stamina Products, Inc. SHALL NOT BE LIABLE FOR THE LOSS OF USE OF ANY PRODUCT, LOSS
OF TIME, INCONVENIENCE, COMMERCIAL LOSS OR ANY OTHER INDIRECT, CONSEQUENTIAL,
SPECIAL OR INCIDENTAL DAMAGES DUE TO BREACH OF THE ABOVE WARRANTY OR ANY
IMPLIED WARRANTY.
This limited warranty is the only written or express warranty given by Stamina Products, Inc. This
warranty gives you specific legal rights, and you may also have other legal rights which vary from state
to state. ANY OTHER RIGHT WHICH YOU MAY HAVE, INCLUDING ANY IMPLIED WARRANTY OR
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, IS LIMITED IN DURATION TO
THE DURATION OF THIS WARRANTY.
The laws in some jurisdictions restrict the rights of manufacturers and distributors of consumer goods
to disclaim or limit implied warranties and consequential and incidental damages with respect thereto.
If any such law is found to be applicable, the foregoing disclaimers and limitations of and on implied
warranties and consequential and incidental damages with respect thereto shall be disregarded and shall
be deemed not to have been made to the extent necessary to comply with such legal restriction.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
20
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTES
21
Download from Www.Somanuals.com. All Manuals Search And Download.
TO CONTACT CUSTOMER SERVICE
For your convenience, Stamina’s customer service representatives can be reached by email at customerservice@
staminaproducts.com or by phone at 1-800-375-7520 (in the U.S.). Our customer service representatives are available Monday
through Thursday from 7:30 a.m. until 5:00 p.m., and Friday 8:00 a.m. until 3 p.m. Central Time.
ONLINE
TELEPHONE
FAX
MAIL
CUSTOMER SERVICE
CUSTOMER SERVICE
Tel: 1 (800) 375-7520
CUSTOMER SERVICE
Fax: (417) 889-8064
STAMINA PRODUCTS, INC.
ATTN: Customer Service
P.O. Box 1071 Springfield, MO. 65801-1071
Would you like to recieve email information or special offers from Stamina Products? Register at contact.staminaproducts.com
TO REGISTER YOUR PRODUCT
To enact your warranty, please register your product by going to register.staminaproducts.com. Please have your product model
number (printed on the cover of this owner’s manual) and the serial number (printed on the black and white sticker on your
product) ready.
If you don’t have internet access, you can call customer service at 1-800-375-7520, or fill out and mail the product registration
form below to Stamina Products, Inc.; P.O. Box 1071; Springfield, MO 65801-1071.
PRODUCT REGISTRATION FORM
Stamina Products, Inc.
P.O. Box 1071
Springfield, MO 65801-1071
Model Number: ......................................................................................
Serial Number: .............................................................................................
Product Name: ..................................................................................................................................................................................................................................
Place Purchased: ..............................................................................................................................................................................................................................
Date of Purchase: ..................................................................................
Purchase Price: ............................................................................................
Last Name: ...................................................................................................
State: ................................................................ Zip Code: .................................................
First Name: ............................................................................................
City: ..................................................................
Email Address: .......................................................................................
Phone #: (
) ......................................................................................
*If yes, be sure your email address is included above.
Would you like to receive email information or special offers from Stamina Products?* ____Yes ____No
Detach and Mail or Fax the Form Above
TO ORDER PARTS
If there are missing or damaged parts, you can go to parts.staminaproducts.com and order those parts. If you have questions,
please contact customer service. Do not return the product. To order parts by mail, fill out the sheet below and fax it to
417-889-8064. The part will be mailed to your address.
Detach and Mail or Fax the Form Below
PARTS ORDER FORM
Stamina Products, Inc.
P.O. Box 1071
Springfield, MO 65801-1071
Mr./Ms: ..............................................................................................................................................................................................................................................
Address: .....................................................................................................................................
City: .................................................................. State: ................................................................
IMPORTANT : We must have your phone number to process the order!
) ................................................................................ Work Phone #: (
Date of Purchase: ..................................................................................
Apt. #:..........................................................................
Zip Code: .................................................
Phone #: (
) .............................................................................
Model #: ............................................................................................................................................................................................................................................
Purchased From: ..............................................................................................................................................................................................................................
IMPORTANT : Before filling out the form below make sure you have the correct information.
Refer to the parts list to make sure you're ordering the right parts!
PART #
DESCRIPTION
QUANTITY
1
EXAMPLE:
1
Rear Unit Assembly
Download from Www.Somanuals.com. All Manuals Search And Download.
|