VSDC/9100060000190 V.qxd 1/20/06 09:01 Page 1
®
®
™
Vacuum Food Storage Lightweight
On-the-Go Containers
Reference Guide
®
®
™
Preserves the taste and
nutritional value of stored foods!
© 2006 JCS/THG,LLC
RIVAL®, the RIVAL Logo®, Seal-a-Meal®, the Seal-a-Meal logoTM and Air Out. Freshness In.™ are trademarks of
JCS/THG, LLC.
READ AND SAVE THESE INSTRUCTIONS
Printed in China
VSDC/9100060000190
VSDC
Download from Www.Somanuals.com. All Manuals Search And Download.
VSDC/9100060000190 V.qxd 1/20/06 09:01 Page 5
®
®
USING YOUR SEAL-A-MEAL LIGHTWEIGHT ON-THE-GO
USING YOUR SEAL-A-MEAL LIGHTWEIGHT ON-THE-GO CONTAINERS
CONTAINERS WITH A SEAL-A-MEAL® VACUUM FOOD SEALER
®
WITH A SEAL-A-MEAL VACUUM FOOD SEALER CONTINUE
®
Your Seal-a-Meal Lightweight On-the-Go Containers let you enjoy the
7. Remove Accessory Hose & Adapter from the Container Lid. The
Container is now ready to be stored.
convenience and benefits of storing pre-made meals, preserving leftovers,
controlling portion sizes and simplifying reheating. They are great for
storing foods or other items on the countertop, in the refrigerator or in the
pantry.
Make sure your Vacuum Food Sealer and Container are sitting on a flat, dry
surface and follow the instructions below:
Note: If your Vacuum Sealer has a Cancel button, it is best to press the
cancel button before removing the Accessory Hose and Adapter from the
Container Lid.
Note: To release the vacuum in the Container, simply open the Vacuum
Valve/Air Release flap.
1. Plug in your Vacuum Food Sealer.
HELPFUL HINTS & TIPS
2. Place the item you wish to seal inside the Container, leaving at least
one inch between the contents and the top rim of the Container.
•
•
Lightweight On-the-Go Containers are great for vacuum sealing any type
of food—pre-made meals, leftovers and healthy portion sizes.
3. Place the Lid on the Container.
4. Insert the Accessory Hose into the Accessory Port on your Vacuum
Make sure there are no crumbs or food debris on the Container Lid, as gaps
Food Sealer.
or an improper seal will prevent air from being removed.
•
•
•
Do not overfill the Container Base with food or liquid.
Store the vacuum sealed Container in an upright position.
Easily microwave foods in your Container, simply remove the Lid and place
the Container Base in your microwave.
•
Some deformation of the Container base may occur during vacuuming.
This is normal and does not effect performance.
5. Place the Accessory Adapter over the Vacuum Valve on the Container
Lid.
6. Close the lid on your Vacuum Food Sealer and activate the vacuum
feature (refer to the Reference Guide for your Vacuum Sealer). Once
the air has been removed from the Container, the Sealer will
automatically turn off.
-5-
-4-
Download from Www.Somanuals.com. All Manuals Search And Download.
VSDC/9100060000190 V.qxd 1/20/06 09:01 Page 7
NOTES
CLEANING YOUR LIGHTWEIGHT ON-THE-GO CONTAINERS
The Container Base and Lid can be safely washed in the top rack of the
dishwasher. You can also wash both pieces in warm, soapy water; rinse well
and dry thoroughly.
HOW TO USE THE ACCESSORY PORT ADAPTER FITTING
Use this fitting with other brand Vacuum Sealers that have a smaller
®
diameter Accessory Port. NOTE: On newer Seal-a-Meal models -- this
Fitting will also be needed.
®
1. Insert the male end of the Seal-a-Meal Accessory Hose into the
female end of the Fitting.
2. Insert the Fitting into the Accessory Port of your Vacuum Sealer.
3. It's as easy as that! Now, you're ready to start using your Lightweight
On-the-Go Containers.
-7-
-6-
Download from Www.Somanuals.com. All Manuals Search And Download.
|