Webstar Cable Modem
Model DPX130 Cable Modem
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT RULES FOR SAFE OPERATION,continued
Cleaning the Equipment
Ventilation
Before cleaning this equipment, unplug it from the
electrical outlet. Use a damp cloth to clean this
equipment. Do not use a liquid cleaner or an aerosol
cleaner. Do not use a magnetic/ static cleaning device
(dust remover) to clean this equipment.
This equipment has openings for ventilation that protect
it from overheating. To ensure the reliability of this
equipment, do not obstruct the openings.
• Do not place other equipment, lamps, books, or any
other object on the top of or beside this equipment.
Placement
• Do not place this equipment in any of the locations
that follow:
Place this equipment in a location that is close enough
to an electrical outlet to accommodate the length of the
power cord. Place this equipment on a stable surface.
The surface must support the size and weight of this
equipment. Place this equipment either horizontally or
vertically.
- On a bed, sofa, rug, or similar surface
- Over a radiator or a heat register
- In an enclosure, such as a bookcase or equipment
rack, unless the installation provides proper
ventilation
WARNING:
WARNING:
Avoid electric shock and fire hazard. Never
push objects through the openings in this
equipment. Objects can touch dangerous
voltage points or cause electrical shorts that
can result in electric shock or fire.
Avoid personal injury and damage to this
equipment. An unstable surface may cause
this equipment to fall.
Accessories
Do not use accessories with this equipment unless
recommended by your cable service provider.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT RULES FOR SAFE OPERATION,continued
Liquid or Moisture
Power Sources
Do not expose this equipment to liquid or moisture. Do
not place this equipment on a wet surface. Do not spill
liquids on or near this equipment.
A label on the AC power adapter which is supplied
with this equipment, indicates the correct power source
for this equipment. Operate this equipment only from
an electrical outlet that has the voltage and frequency
that the label indicates.
Lightning and Power Surges
If you are unsure of the type of power supply to your
residence, consult Scientific-Atlanta, Inc., or your local
power company.
Plug your equipment into a surge protector in order to
reduce the risk of damage from lightning strikes and
power surges. If you are unsure of the type of surge
protector to use, contact your local cable service
provider.
WARNING:
Avoid electric shock and fire hazard. Do not
overload electrical outlets and extension cords.
For equipment that requires battery power or
other sources to operate, refer to the operating
instructions for that equipment.
Servicing
Do not open the cover of this equipment. If you open the
cover, your warranty will be void. Refer all servicing to
qualified personnel only. Contact your cable company
for instructions.
Grounding
Power Cord Protection
This equipment may be supplied with a non-polarized
two-prong plug, or a three-prong plug. It is important to
fully insert the plug into the electrical wall outlet.
Arrange all power cords so that people cannot walk on
the cords, place objects on the cords, or place objects
against the cords, which can damage the cords. Pay
particular attention to cords that are at plugs, at
electrical outlets, and at the places where the cords exit
the equipment.
If you are unable to insert this plug fully into the outlet,
contact an electrician to replace your obsolete outlet.
4
Download from Www.Somanuals.com. All Manuals Search And Download.
IMPORTANT RULES FOR SAFE OPERATION,continued
Checklist
Damage that Requires Service
Equipment Checklist
For damage that requires service, unplug this equipment
from the electrical outlet. Contact your cable service
provider when any of the following situations occur:
Before you install your cable modem, verify
that the carton contains:
• One WebSTAR™ Model DPX 130 Cable
Modem
• There is damage to the power cord or plug
• Liquid enters the equipment
• One twisted pair Ethernet cable
(CAT5/ RJ-45)
• A heavy object falls on the equipment
• There is exposure to rain or water
• One USB cable
• Operation is not normal (the instructions describe the
proper operation)
• One Power Adapter
• If you drop this equipment, or damage the cabinet of
this equipment
• One Power cord (may be packed separately)
• If this equipment exhibits a distinct change in
performance
• One Vertical Modem Stand (attached to the
modem)
Upon completion of any service or repairs to this
equipment (cable modem), ask the service technician to
perform safety checks to determine that the equipment
is in proper operating condition.
• One diskette containing the USB drivers
Note: You will need an optional cable
signal splitter and additional standard RF
coaxial cable if you want to connect a VCR,
a Digital Home Communications Terminal
(DHCT) or a set-top converter, or a TV to
the same cable connection as your cable
modem.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Overview
WebSTAR Cable Modem Features
Contents
Overview ................................................................... 6
Welcome to the world of high-speed Internet access.
Your new WebSTAR Model DPX 130 Cable Modem
offers the following outstanding features:
Getting Started ........................................................ 7
System Requirements ............................................. 8
WebSTAR Cable Modem Front Panel ................. 9
WebSTAR Cable Modem Back Panel ................ 10
Connection Diagram ............................................. 11
TCP/ IP Configuration .......................................... 12
USB Driver Installation ........................................ 15
USB Driver Uninstallation .................................... 17
Renew the IP Address ........................................... 18
Troubleshooting .................................................... 20
Tips for Improved Performance ......................... 22
Notices ..................................................................... 23
Customer Information .......................... Back Cover
• Euro-DOCSIS certification ensures full
interoperability with any Euro-DOCSIS
compatible headend equipment
• Two-way, high-speed data rates much
faster than 56K analog modems, ISDN, or DSL
• Plug and Play operation for easy setup
and installation
• 10/ 100BaseT Ethernet or USB connection
• Clear LED display
• Vertical or horizontal placement
• Cable modem software can be upgraded
automatically by your cable service provider
• Supports up to 16 devices (may require additional
equipment or service provider fees)
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Getting Started
Contacting Your Local Cable Service Provider
You must also give your cable service provider
the following information:
You need to set up an Internet access account with
your local cable service provider in order to use
your cable modem. When you contact your cable
service provider, verify the following conditions:
• The serial number of the modem
• The Media Access Control (MAC) address of
the modem
• The cable service to your home supports
two-way, Euro-DOCSIS-compatible cable
modem access. If your cable company does not
provide two-way Euro-DOCSIS-compatible
service, this modem will not be able to
communicate with your cable service
provider’s Internet access service.
These numbers appear on a white bar
code label located on the side of the
cable modem. The serial number consists of
a series of alpha-numeric characters located
directly under the SER. NO. bar code. The
MAC address consists of a series of
alpha-numeric characters located directly
under the MAC bar code. The following
example illustrates a sample bar code label.
• You have an active RF coaxial cable line near
your personal computer (PC), and is it capable
of two-way cable modem service. If your
current cable input is not conveniently located
near your PC, your cable service provider can
install one.
MODEL DPX130
CABLE MODEM
P/N XXXXXX
SER. NO.
• You have an Internet access account. Your
cable service provider will set up your Internet
access account, and will become your Internet
Service Provider (ISP) to enable you to send
and receive e-mail, access the World Wide
Web, and receive other Internet services.
SM0000000
MAC
MADE IN TAIWAN
T9379
000000-000000
7
Download from Www.Somanuals.com. All Manuals Search And Download.
System Requirements
Introduction
System Requirements for a USB Connection
• A PC with Windows 98/ 98SE/ ME/ or 2000
operating system
This section provides hardware and software
requirements.
• A master USB port installed in your PC
Minimum System Requirements for PCs
• PC with a Pentium MMX 133 processor or
greater
Before You Begin
Select the location for your workspace giving
careful consideration to the following:
• 32 MB of RAM
• Netscape or Internet Explorer
• 3.5-in. disk drive or CD-ROM drive
• Position your PC and cable modem so
that they are located near your cable input.
There should be plenty of room to guide the
cables away from the modem without
straining or crimping them.
Minimum System Requirements for Macintosh
• MAC OS 7.5 or higher
• 32 MB of RAM
• Air flow around the cable modem should not
be restricted.
System Requirements for an Ethernet Connection
• A PC with Windows 95 operating system
(or later) with TCP/ IP protocol installed, or an
Apple Macintosh computer with TCP/ IP
protocol installed
• Familiarize yourself with all of the materials
supplied with the cable modem. Read
this user’s guide thoroughly before installing
the cable modem.
• An active 10/ 100 BaseT Ethernet network
interface card (NIC) installed in your PC.
8
Download from Www.Somanuals.com. All Manuals Search And Download.
WebSTAR Cable Modem Front Panel
Front Panel Indicators
1
Power
Illuminates solid green to indicate that power is being
applied to the cable modem
2
PC
Illuminates solid green to indicate that an Ethernet/ USB
carrier is present
1
3
Blinks to indicate that Ethernet/ USB data is being
transferred
2
4
3
4
Cable
Status
Blinks during software upgrade and to indicate cable
activity
Illuminates solid green when the modem is registered on the
network
Blinks to indicate one of the following conditions:
• The cable modem is booting up and not ready for data.
• The cable modem is scanning the network and attempting
to register.
• The cable modem has lost registration on the network,
and will continue blinking until it registers again.
T9121
9
Download from Www.Somanuals.com. All Manuals Search And Download.
WebSTAR Cable Modem Back Panel
Back Panel Components
1 Cable In
F-Connector connects to an active RF coaxial cable signal
from your cable service provider
CABLE
IN
2 USB
12 Mbps USB port connects to the USB port on your
PC
1
2
3 Ethernet
4 Reset
RJ-45 Ethernet port connects to the 10/ 100BaseT Ethernet
port on your PC
USB
Reset-to-Default button
ETHERNET
CAUTION:
3
4
This button is for maintenance purposes only.
Do not use!
RESET
12 VDC
0.6A Max
5 12 V DC
Power
Connects the cable modem to the DC output of the AC
power adapter that is provided with your cable modem
5
Connector
Note: Only use the power cord and the AC power
adapter that is provided with your cable modem.
T9356
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Connection Diagram
Installation
The following diagram illustrates one of the various
connection options that are available to you.
Follow these steps for proper installation.
1. Power down your PC and unplug it from the
power source.
RF
Cable
2. Connect the active RF coaxial cable to the
CABLE IN connector. Use an optional cable
signal splitter to add a TV, a DHCT or set-top
converter, or a VCR.
Cable
Splitter
CH+
VOLñ
VOL+
MENU
GUIDE
INFO
A/B
POWER
CHñ
BYPASS
CABLE
IN
RF
Cables
3. Connect your PC to either the Ethernet port or
the USB port using one of the appropriate
supplied cables.
Cable-Ready TV,
VCR, or Set-Top
Converter
USB
4. Insert the AC power adapter cord into the DC
power connector on the back of the cable modem,
insert the supplied cord into the AC power
adapter, and then plug the cord into an AC power
source.
Power Supply
ETHERNET
RESET
PC
12 VDC
0.6A Max
Ethernet
Cable
5. Plug in and power on your PC.
Power
Supply
6. Choose one of the following options:
• To configure the TCP/ IP protocol for
Ethernet—see TCP/IP Configuration on pages
12 through 14.
T9355
Note: Professional installation may be available.
Contact your local cable service provider for further
assistance.
• To install the USB Drivers for USB—see USB
Driver Installation on pages 15 and 16.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
TCP/IP Configuration
Introduction
4. Does your PC have the TCP/ IP protocol?
This section contains instructions for configuring
the TCP/ IP protocol for both Windows and
Macintosh operating systems.
• If yes, go to step 8.
• If no, click Add.
5. Click Protocol, and then click Add.
Configuring the TCP/IP Protocol for Windows 95/98/ME
6. In the Manufacturers list, click Microsoft.
Note: You need to have either an Ethernet
Network Interface Card (NIC) with the TCP/ IP
communications protocol installed on your system,
or a USB network interface, before you install your
cable modem.
7. In the Network Protocols list, scroll to and click
TCP/IP, and then click OK.
8. Scroll to and click the TCP/IP Ethernet Adapter
protocol, and then click Properties.
Follow these steps to install and configure the
TCP/ IP protocol for Windows 95/ 98.
9. Click the IP Address tab, and then select Obtain
an IP address automatically.
1. Click Start, select Settings, and choose Control
Panel. The Control Panel window appears.
10. Click the Gateway tab and verify that these
fields are empty. If they are not empty, highlight
and delete all information from the fields.
2. In the Control Panel window, double-click the
Network icon. A list of installed network
components appears.
11. Click the DNS Configuration tab; then,
select Disable DNS.
3. Under the Configuration tab, read the list of
installed network components to verify your
PC contains the TCP/ IP protocol.
12. Click OK. The Copying Files... window appears.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
TCP/IP Configuration, continued
4. In the Local Area Connection Properties
window, select Internet Protocol (TCP/IP),
then click Properties. The Internet Protocol
(TCP/ IP) Properties window appears.
13. When the system finishes copying the
files, click OK.
14. Close all networking windows.
5. In the Internet Protocol (TCP/ IP) Properties
window, select both Obtain an IP address
automatically, and Obtain DNS server
address automatically, and then click OK. The
Local Network window appears.
15. When the System Settings Change dialog
box appears, click YES to restart your
computer.
Configuring the TCP/IP Protocol for Windows 2000
6. In the Local Network window, click OK to
Follow these steps to install and configure the
TCP/ IP protocol for Windows 2000.
restart your computer.
Configuring the TCP/IP Protocol on a Macintosh
1. Click Start, select Settings, and choose
Network and Dial-up Connections. The
Network and Dial-up Connections window
appears.
Note: Many Macintosh computers have Ethernet
devices installed at the factory.
Follow these steps to verify that the TCP/ IP
communications protocol and an Ethernet device is
installed on your system.
2. In the Network and Dial-up Connections
window, double-click Local Area Connection
icon. The Local Area Connection Status
window appears.
1. Click the Apple icon in the upper left corner
of the Finder. Scroll down to Control Panels,
and then click TCP/IP.
3. In the Local Area Connection Status window,
click Properties. The Local Area Connection
Properties window appears.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
TCP/IP Configuration, continued
7. Is there a Hardware Address listed in this
window?
2. Click Edit on the Finder (gray bar) at the top
of the screen. Scroll down to the bottom of the
menu, and then click User Mode.
•
If yes, click OK. To close the TCP/IP
Control Panel window, click File, and
then scroll down to click Close.
3. Click Advanced in the User Mode window,
•
If no, you must power down your Macintosh
and then click OK.
4. Click the Up/Down selector arrows located
to the right of the Connect Via section of the
TCP/ IP window, and then click Using DHCP
Server.
8. With the power off, simultaneously press and
hold down the Command (Apple), Option, P,
and R keys on your keyboard. Keeping those
keys pressed down, power on your
Macintosh. The computer will start, and you
will hear the Apple chime; do not release these
keys.
5. Click Options in the TCP/ IP window, and then
click Active in the TCP/ IP Options window.
Note: In some cases, the Load only when
needed option will not appear. If it appears,
select the option. A check mark appears
in the option.
9. Continue pressing these keys for up to three
chimes, then release the keys and allow the
computer to restart.
10. When your computer fully reboots, repeat steps
1 through 7 to verify that all TCP/ IP settings
match those in the preceding instructions.
If your computer still does not have a Hardware
Address, contact your local authorized Apple
dealer or Apple technical support center.
6. Verify that the Use 802.3 option located in the
upper right-hand corner of the TCP/ IP window is
unchecked. If there is a check mark in the option,
deselect the option, and then click Info in the
lower left-hand corner.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
USB Driver Installation
Installing the USB Drivers for Windows 98/ME
5. In the Add New Hardware Wizard window,
If your PC has a USB interface, follow these
steps to install the provided USB drivers. If your
PC does not have a USB interface, you may skip
this procedure.
select Floppy disk drives, then click Next.
6. In the Add New Hardware Wizard window,
select The updated driver (Recommended),
then click Next.
1. Insert the USB Cable Modem Driver
Installation disk into the floppy disk A drive of
your PC.
7. In the Add New Hardware Wizard window,
click Next. The Copying Files...window
appears. After about 10 to 20 seconds has
passed, the Add New Hardware Wizard
window reappears.
2. Wait until the Power and Status indicators on
the cable modem illuminate solid green, then
plug the USB cable into the USB port on your
PC. The Add New Hardware Wizard window
appears.
8. Click Finish. The System Settings Change
window appears. Installation is complete.
9. Click Yes to restart your computer.
3. Click Next.
4. In the Add New Hardware Wizard window,
select Search for the best driver for your
device (Recommended), then click Next.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
UseUS
USB Driver Installation,continued
Installing the USB Driver for Windows 2000
6. In the Found New Hardware Wizard Window,
click Next again. The Digital Signature Not
Found window appears.
Follow these steps to install the USB driver on a
Windows 2000 system.
1. Wait until the Power and Status indicators on
the cable modem illuminate solid green, then
plug the USB cable into the USB port on your
PC. The Found New Hardware Wizard window
appears.
7. In the Digital Signature Not Found window,
click Yes to continue the installation. The Found
New Hardware Wizard reappears.
8. Click Finish.
2. Click Next.
3. In the Found New Hardware Wizard window,
select Search for a suitable driver for my
device (recommended), then click Next.
4. Insert the USB Driver installation disk into
floppy disk drive A.
5. In the Found New Hardware Wizard window,
select Floppy disk drives, then click Next. The
Found New Hardware Wizard window
updates.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
zuUn
USB Driver Uninstallation
Uninstalling the USB Drivers for Windows 98/ME
Uninstalling the USB Drivers for Windows 2000
You may need to uninstall the USB Drivers.
Follow this procedure to uninstall the USB
drivers on a Windows 98/ ME system.
Follow this procedure to uninstall the USB
drivers on a Windows 2000 system.
1. Click Start, select Settings, and choose
Control Panel. The Control Panel window
appears.
1. Click Start, select Settings, and choose Control
Panel. The Control Panel window appears.
2. In the Control Panel window, double-click
the Add/Remove Hardware icon. The
Add/ Remove Hardware Wizard window
appears.
2. In the Control Panel window, double-click the
System icon. The System Properties window
appears.
3. In the Add/ Remove Hardware Wizard
3. In the System Properties window, click the
Device Manager tab, select Network
Adapters, choose DPX USB Cable Modem
Adapter, and then click Remove.
window, click Next.
4. In the Add/ Remove Hardware Wizard
window, click Uninstall/Unplug a device,
and then click Next.
4. Click OK to finish the uninstall procedure,
and to close the System Properties window.
5. In the Add/ Remove Hardware Wizard
window, click Uninstall a device, and then
click Next.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
USB Driver Uninstallation, continued
Renew the IPAddress
Uninstalling the USB Drivers for Windows 2000, continued Renewing the IP Address for Windows 95/98/ME
If your PC cannot access the Internet after the
cable modem is online, it is possible that your
PC did not renew its IP address. Follow these
steps to renew the IP address on your PC.
6. In the Add/ Remove Hardware Wizard window,
click USB Cable Modem Adapter, and then
click Next.
7. In the Add/ Remove Hardware Wizard window,
click Yes, I want to uninstall this device, and
then click Next.
1. Click Start, and then click Run to open the
Run window.
2. Type winipcfg in the Open field, and click
OK to execute the winipcfg command. The IP
Configuration window appears.
8. In the Add/ Remove Hardware Wizard window,
click Finish to complete the uninstall procedure
and to close the Add/ Remove Hardware
Wizard window.
3. Click the down arrow to the right of the top
field, and select the Ethernet adapter that is
installed on your PC. The IP Configuration
window displays the Ethernet adapter
information.
4. Click Release, and then click Renew. The IP
Configuration window displays a new IP
address.
5. Click OK to close the IP Configuration
Download from Www.Somanuals.com. All Manuals SewarcihnAdnodwDo.wnload.
18
Renew the IPAddress, continued
Renewing the IP Address for Macintosh
Renewing the IP Address for Windows 2000
Follow these steps to renew the IP address on your
Macintosh computer.
Follow these steps to renew the IP address on your
PC if you are using Windows 2000.
1. Click the Apple icon in the upper left corner of
the Finder. Scroll down to Control Panels,
and then click TCP/IP. The TCP/ IP window
appears.
1. Click Start, and then click Run to open the
Run window.
2. Type cmd in the Open field, and click OK to
execute the cmd command. A DOS window
appears.
2. In the Configure field of the TCP/ IP window,
select Using DHCP Server.
3. At the DOS prompt, type ipconfig and press
Enter. A list of IP addresses appears.
3. Click the Close icon in the uper left corner of
the TCP/ IP window. The save changes to the
current configuration? message box appears.
4. Type ipconfig /release and press Enter.
5. Type ipconfig /renew and press Enter.
4. Click Save in the save changes message box.
6. Type exit to close the DOS window and
5. Wait approximately 2 or 3 minutes, and repeat
step 1 to verify the IP address. If there is no IP
address, contact your local authorized Apple
dealer or Apple technical support center.
return to Windows.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Troubleshooting
Frequently Asked Questions
Q. Once my cable modem is connected, how do I
access the Internet?
Q. What if I don’t subscribe to cable TV?
A. If cable TV is available in your area, data
service may be made available with or without
subscribing to cable TV service. Contact your
local cable service provider for complete
information on cable services, including
high-speed Internet access.
A. Your local cable service provider becomes your
Internet Service Provider (ISP), offering a wide
range of services including e-mail, chat, news, and
information services.
Q. Can I watch TV and surf the Internet at the
same time?
Q. How do I arrange for installation?
A. Absolutely! If you subscribe to cable television
service, you can watch TV and use your cable
modem at the same time by connecting your TV
and your cable modem to the cable network using
an optional cable signal splitter.
A. Professional installation from your cable
service provider may be provided. A professional
installation ensures proper cable connection to
the modem and to your PC, and ensures proper
configuration of all hardware and software
settings.
Q. Can I run more than one device on the
modem?
Q. How does the WebSTAR Cable Modem
connect to my computer?
A. Yes! You can operate two PCs simulataneously
using an Ethernet connection to one PC, and a USB
connection to the other. Your WebSTAR cable
modem will support up to 16 devices using an
Ethernet hub, which you can purchase at your
local PC or office supply retailer. Contact your
A. The cable modem connects to the USB port or
the 10/ 100BaseT Ethernet port on your PC. If
your PC is not equipped with an Ethernet
interface, an Ethernet card is available from your
local PC or office supply retailer, or from your
20
Download from Www.Somanuals.com. All McanauballseSseearrcvhiAcnedpDorwonvloiadde. r for further assistance.
cable service provider.
Troubleshooting , continued
Common Troubleshooting Issues
The modem does not register a cable
connection.
The modem does not register an Ethernet
connection.
• The modem works with a standard,
75-ohm, RF coaxial cable. If you are using a
different cable, your cable modem will not
function properly. Contact your
Even new PCs do not always have
Ethernet capabilities. Be sure to verify that
your computer has a 10/ 100BaseT Ethernet card
and that the Ethernet driver software is
properly installed. If you purchase and install
an Ethernet card, follow the installation
instructions very carefully.
cable service provider to determine
whether you are using the correct cable.
• Verify that you have followed the
procedure for Renewing the IP address
for Windows 95/98, or the procedure for
Renewing the IP address for Windows
2000 on pages 18 and 19 earlier in this
guide.
Note: If you have a 100BaseT card installed on
your PC, make certain that it also supports
10BaseT.
• Your NIC card or USB interface may be
malfunctioning. Refer to the trouble-
shooting information in the NIC or
USB documentation.
21
Download from Www.Somanuals.com. All Manuals Search And Download.
Tips for Improved Performance
Check and Correct
• For USB port use, verify that you have
followed the procedure for Installing the USB
Drivers for Windows 98/ME on page 15 of
this guide, or the procedure for Installing the
USB Drivers for Windows 2000 on page 16 of
this guide.
If your cable modem does not perform as
expected, the following tips may help. If you need
further assistance, contact your cable service
provider.
• Verify that the plug to your cable modem AC
adapter is properly inserted into an electrical
outlet.
• Verify that you have called your cable service
provider and given them the serial number
and MAC address of your cable modem.
• Verify that your cable modem AC adapter is
not plugged into an electrical outlet that is
controlled by a wall switch. If the electrical
outlet is controlled by a wall switch, make sure
the switch is in the ON position.
• If you are using a cable signal splitter so
that you can connect the cable modem to
other devices, remove the splitter and
reconnect the cables so that the cable
modem is connected directly to the cable
input. If the cable modem functions properly
when connected in this way, the cable signal
splitter may be defective and may need to be
replaced.
• Verify that the Power and Status indicators on
the front panel of your cable modem are
illuminated.
• Verify that all cables are properly connected,
and that you are using the correct cables.
• Verify that your cable service is active and that
it supports two-way service.
• For Ethernet port use, verify that your TCP/ IP
is properly installed and configured.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
Notices
Trademarks
Software Use Notice
Scientific-Atlanta and the Scientific-Atlanta ARCs logo,
The software described in this document is copyrighted and
furnished to you under a license agreement. You may only
use or copy this software in accordance with the termns of
your license agreement..
are registered trademarks of Scientific-Atlanta, Inc.
WebSTAR and “Bringing the Interactive Experience Home”
are trademarks of Scientific-Atlanta, Inc.
Other trademarks listed herein are the property of their
respective owners.
Firmware Use Notice
The firmware in this equipment is copyrighted. You may only
use the firmware in the equipment in which it is provided.
Any reproduction or distribution of this firmware, or any
Disclaimer
Scientific-Atlanta, Inc. assumes no responsibility for errors or
omissions that may appear in this guide. Scientific-Atlanta
reserves the right to change this guide at any time without
notice.
Documentation Copyright Notice
© 2001 Scientific-Atlanta, Inc. All rights reserved.
Printed in Taiwan.
Information in this document is subject to change without
notice. No part of this document may be reproduced in any form
without the express written permission of Scientific-Atlanta, Inc.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
USB Driver Uninstallation, continued
United States: Scientific-Atlanta, Inc., 5030 Sugarloaf Parkway, Box 465447, Lawrenceville, GA 30042; Tel: 770-903-5000; TWX: 810-799-4912; Telex: 0542898
Europe: Scientific-Atlanta Europe GmbH, Westerbachstrasse 28-32, 61476 Kronberg, Germany; Tel: 49-6173-928-000
Asia-Pacific: Scientific-Atlanta (Singapore) Pte. Ltd., 1 Claymore Drive, #08-11 Orchard Towers, Singapore 229594; Tel: 65-733-4314
Latin America: Scientific-Atlanta Argentina S.A., C. Pellegrini 1149 Piso 11o Capital Federal 1011 Buenos Aires, Argentina; Tel: 54-11-4325-2800
www.scientificatlanta.com
© 2001 Scientific-Atlanta, Inc. All rights reserved.
April 2001
Printed in Taiwan
Part Number 745265 Rev A
24
Download from Www.Somanuals.com. All Manuals Search And Download.
|