VR337/VR508
USER’S
GUIDE
VIDEO CASSETTE RECORDER
Download from Www.Somanuals.com. All Manuals Search And Download.
Introduction
Table of Contents
DISPLAY Button __________________ 14
Time Counter_____________________ 14
Index Search _____________________ 15
Zero Search ______________________ 15
Commercial Scan (SEARCH Button)_ 15
Pause for Stop-Action______________ 16
Frame Advance (F.ADV Button)_____ 16
Automatic Tracking _______________ 16
Manual Tracking__________________ 16
Important Information
Warnings______________________________ i
Note to Cable TV Installer _______________ i
Product Registration ____________________ i
Hooking Up the VCR
Choosing a Hookup ____________________ 2
Antenna or Cable System Without a
Cable Box _________________________ 3
Cable System With Cable Box to
Recording a Program
Recordings ___________________________ 17
Recording Speeds__________________ 17
Normal Recording ____________________ 17
Watch a TV Channel While VCR
Unscramble All Channels ___________ 4
Cable System With Cable Box to
Unscramble Only Pay Channels______ 5
Connecting Two VCRs for Copying Tapes_ 6
is Recording a Different Channel __ 17
Express Recording ____________________ 18
Recording While You're Away
Setting Up the VCR
Setting a Timer Recording__________ 19
Stopping a Timer Recording ________ 19
Timer Recording From the
Startup
Check Accessories With VCR ________ 7
Insert Batteries in Remote ___________ 7
Turn on TV and VCR _______________ 7
Place Channels in VCR's Memory ____ 8
Add or Remove Channels from
VCRÕs Line Input _______________ 20
Checking or Clearing
Timer Recordings_______________ 20
Using the Recording Features
VCR's Memory __________________ 8
Select the Language/Seleccione el
Idioma/SŽlectionner la Langue____ 9
Use TV¥VCR Button _______________ 9
Set the ALERT SOUND Feature ______ 9
Set the Time and Date _____________ 10
Set the Automatic Daylight-
Recording Pause ___________________ 20
Pro-Tect Plusª Feature _____________ 20
Using Two VCRs for Copying
and Editing Tapes__________________ 21
Copying and Editing Tapes Using
Compatible Remote ________________ 21
Saving Time ___________________ 10
References
Location of Controls
Using the Remote Control
Front Panel_______________________ 22
Back Panel _______________________ 23
Display Panel_____________________ 23
Specifications_________________________ 24
Cleaning the VCR _____________________ 24
Limited Warranty _____________________ 25
Trouble Checks ____________________ 26-27
Index _____________________________ 28-29
VCR Function Buttons _________________ 11
Playing a Tape
Playback _____________________________ 12
Using the Playback Features
Auto Play Feature _________________ 13
Picture Search ____________________ 13
Slow Motion______________________ 13
1
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the VCR
Choosing a Hookup
The hookups on pages 3 through 5 are divided into two hookup types:
Basic (A) and Advanced (B).
The basic hookup shows the backs of TVs that have only an antenna/cable
connection. It is the easier of the two and additional accessories may not be
needed.
The advanced hookup shows the VCR hooked up to a TV with audio and video
jacks using a signal splitter. This connection may improve the picture quality as
well as convenience of operation.
Answer the questions to choose the hookup for your VCR.
1. How does your TV receive signals?
Choose one answer from below.
A. Outside antenna Ð Turn to page 3.
B. Rabbit ears (set-top) and/or bow tie antenna Ð Turn to page 3.
C. Cable System Ð Go to question 2.
2. What type of Cable-TV system* do you have?
Choose one answer from below.
A. Cable without a box Ð Turn to page 3.
B. Cable box to unscramble all the channels Ð Turn to page 4.
C. Cable box to unscramble only pay channels, such as HBO, Showtime,
Cinemax, etc. Ð Turn to page 5.
*You may need to contact your local cable company for assistance.
Optional Hookups
How to hook up two VCRs for copying tapes.
A. Select a hookup by answering questions 1 and 2 above.
B. Then, modify the connections as shown on page 6.
2
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the VCR
Antenna or Cable System Without a Cable Box
A. Basic hookup.
A
Use this hookup for a simple connection
which requires fewer accessories.
From Antenna
or Cable
300/75 Ohm
Adapter
Back of VCR
1. Set the 3CH.4 switch on back of VCR to
either channel 3 or 4.
Tune the TV to this channel and use the
IN FROM
ANT.
OR
TV•VCR button to watch the VCR.
VHF/UHF
AUDIO1
OUT IN
VIDEO1
OUT TO TV
3 CH. 4
OUT
IN
2. Connect as shown.
This connection may require additional
accessories not provided.
RF Coaxial Cable
(supplied)
3. Plug in power cords of VCR and TV.
Continue to page 7.
4.
75 to 75/300 Ohm
Separator
VHF
UHF
OR
Cable/
Antenna
Back of TV
B. Advanced hookup.
Use this hookup for slightly improved
picture quality and more convenient
operation Ñ use of the TV•VCR button is not
required.
B
From Antenna
or Cable
300/75 Ohm
Adapter
1. Connect as shown.
OR
This connection requires additional
accessories not provided. A Y-adapter may
be required to hear sound from both
channels if your TV is not stereo.
Back of VCR
Signal
Splitter
IN FROM
ANT.
2. Plug in power cords of VCR and TV.
VHF/UHF
AUDIO1
OUT IN
VIDEO1
OUT IN
OUT TO TV
3 CH. 4
Continue to page 7.
3.
Tune the TV to its video input to watch the
VCR.
Audio/Video Cables
VIDEO
INPUT
RF Coaxial Cable
(supplied)
RIGHT
OUT AUDIO
S-VIDEO
IN
CABLE /
ANTENNA
L /
MONO
Back of TV
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the VCR
Cable System With Cable Box to Unscramble All Channels
A. Basic hookup.
A
Use this hookup for a simple connection
which requires fewer accessories.
From Cable
Back of VCR
1. Set the 3CH.4 switch on back of VCR to
either channel 3 or 4.
RF Coaxial
Cable
Cable Box
IN FROM
ANT.
Tune the TV to this channel and use the
TV•VCR button to watch the VCR.
IN
OUT
VHF/UHF
AUDIO1
OUT IN
VIDEO1
OUT TO TV
3 CH. 4
OUT
IN
2. Connect as shown.
This connection may require additional
accessories not provided.
RF Coaxial Cable
(supplied)
3. Plug in power cords of VCR, TV, and
cable box.
Continue to page 7.
4.
75 to 75/300 Ohm
Separator
VHF
UHF
OR
Cable/
Antenna
Back of TV
B. Advanced hookup.
B
Use this hookup for slightly improved
picture quality and more convenient
operation Ñ use of the TV•VCR button is not
required.
Cable Box
From Cable
IN
OUT
RF Coaxial
Cable
1. Connect as shown.
This connection requires additional
accessories not provided. A Y-adapter may
be required to hear sound from both
channels if your TV is not stereo.
Back of VCR
RF Coaxial
Cable
Signal
Splitter
IN FROM
ANT.
VHF/UHF
2. Plug in power cords of VCR, TV, and
AUDIO1
OUT IN
VIDEO1
OUT IN
OUT TO TV
cable box.
3 CH. 4
Continue to page 7.
3.
Audio/Video Cables
Tune the TV to its video input to watch the
VCR.
VIDEO
INPUT
RF Coaxial Cable
(supplied)
RIGHT
OUT AUDIO
S-VIDEO
IN
CABLE /
ANTENNA
L /
MONO
Back of TV
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the VCR
Cable System With Cable Box to Unscramble Only Pay Channels
(such as HBO, Showtime, Pay-Per-View, etc.)
A. Basic hookup.
A
From Cable
Use this hookup for a simple connection
which requires fewer accessories.
Back of VCR
1. Set the 3CH.4 switch on back of VCR to
RF Coaxial
Cable
Cable Box
either channel 3 or 4.
IN FROM
ANT.
Tune the TV to this channel and use the
TV•VCR button to watch the VCR.
IN
OUT
VHF/UHF
AUDIO1
VIDEO1
OUT TO TV
3 CH. 4
OUT
IN
OUT
IN
2. Connect as shown.
This connection may require additional
accessories not provided.
RF Coaxial Cable
(supplied)
3. Plug in power cords of VCR, TV, and
cable box.
75 to 75/300 Ohm
Separator
Continue to page 7.
4.
VHF
UHF
OR
Cable/
Antenna
Back of TV
B. Advanced hookup.
Cable Box
B
From Cable
Use this hookup for slightly improved
picture quality and more convenient
operation Ñ use of the TV•VCR button is not
required.
IN
OUT
Signal
Splitter
1. Connect as shown.
This connection requires additional
accessories not provided. A Y-adapter
may be required to hear sound from both
channels if your TV is not stereo.
Back of VCR
IN FROM
ANT.
VHF/UHF
AUDIO1
OUT IN
VIDEO1
OUT TO TV
2. Plug in power cords of VCR, TV, and
OUT
IN
3 CH. 4
cable box.
Continue to page 7.
3.
Audio/Video Cables
Tune the TV to its video input to watch
the VCR. View all pay channels through
the VCR.
VIDEO
INPUT
RF Coaxial
Cable
(supplied)
RIGHT
OUT AUDIO
S-VIDEO
IN
CABLE /
ANTENNA
L /
MONO
Back of TV
5
Download from Www.Somanuals.com. All Manuals Search And Download.
Hooking Up the VCR
Connecting Two VCRs for Copying Tapes
A
Option A hookup.
Playback VCR
Use this hookup for a simple connection
which requires fewer accessories.
From Antenna, Cable
or Cable Box
IN FROM
ANT.
1. Select a hookup from pages 2 through 5
VHF/UHF
and then modify with this connection.
AUDIO1
OUT
IN
VIDEO1
OUT
IN
OUT TO TV
3 CH. 4
2. Set the 3CH.4 switch on the playback
VCR to either channel 3 or 4.
Tune the recording VCR to this channel to
receive the signal from the playback VCR.
RF Coaxial Cable
(supplied)
Recording VCR
3. Connect as shown.
This connection may require additional
accessories not provided.
IN FROM
ANT.
VHF/UHF
AUDIO1
OUT
IN
VIDEO1
OUT
4. Plug in power cords of VCRs and TV.
OUT TO TV
IN
3 CH. 4
Continue to page 7.
5.
RF Coaxial
Cable
Audio/Video
Cables
or
Use the hookup to the TV
as previously selected on
pages 3, 4, or 5.
B
Option B hookup.
Playback VCR (only)
Use this hookup for slightly improved copy
quality and more convenient operation Ñ
use of the TV•VCR button is not required.
IN FROM
ANT.
VHF/UHF
1. Select a hookup from pages 2 through 5
AUDIO1
OUT
IN
VIDEO1
OUT TO TV
and then modify with this connection.
OUT
IN
3 CH. 4
2. Connect as shown.
This connection requires additional
accessories not provided. A Y-adapter
may be required to hear sound from both
channels if your other VCR is not stereo.
Audio/Video
Cables
Recording VCR
From Antenna, Cable
or Cable Box
3. Plug in power cords of VCRs and TV.
IN FROM
ANT.
Continue to page 7.
4.
VHF/UHF
AUDIO1
VIDEO1
OUT
I
OUT TO TV
OUT
IN
3 CH. 4
Select the line (audio/video) input on the
recording VCR to receive the signal from
the playback VCR.
RF Coaxial Cable
(supplied)
Audio/Video
Cables
or
Caution: The unauthorized recording of
television programs and other materials
may infringe the rights of others.
Use the hookup to the TV
as previously selected on
pages 3, 4, or 5.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Startup
1. Check accessories with VCR.
Contact your dealer if any items are missing.
POWER
PAUSE
TV•VCR PREV CH DISPLAY
PLAY
REC
2 “AA” Batteries
REW
FF
SLOW
STOP
3
SEARCH
CHAN
1
2
4
7
5
8
6
9
0
INPUT
MENU
CLEAR
SPEED
F. ADV
Remote
RF Coaxial Cable
(Stock No. 221383)
TRACKING
(Stock No. 221347)
2. Insert batteries in remote.
3. Turn on the TV.
If you used one of the basic hookups, tune the TV to the channel selected with the
3CH.4 switch on back of VCR.
If you used one of the advanced hookups, tune the TV to the TVÕs video input. (See TV
ownerÕs manual for details.)
4. Turn on the VCR.
Press POWER on the remote.
The POWER and VCR indicators light in the VCRÕs display panel. The TIMER indicator
flashes until the time is set.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Startup
5. Place channels in the VCR’s memory.
The first time you turn on the VCR or after a power
interruption, the VCR displays a message on the TV screen
prompting you to perform the AUTO CHANNEL SEARCH. If
the message does not appear, go to step A below. If the
message appears, follow the directions on the screen.
AUTO-SEARCH CHANNELS
CONNECT ANTENNA CABLE...
THEN PRESS CH UP
Wait until the channel numbers stop changing. This takes
about one to two minutes. The TV tunes to the lowest
channel found. Pressing CHANNEL up or down selects only
the active channels.
If you ever need to manually set up channels because you
change cable or antenna signals:
A. Press MENU to display the VCR MAIN MENU on the TV
VCR MAIN MENU
screen. If this menu does not appear:
1 TIMER RECORDINGS
2 TIME
3 CHANNELS
¥ Make sure the TV is tuned to same channel as the
3CH.4 switch on the VCR or the TVÕs video input
(refer to TVÕs manual).
CHANNELS
1 AUTO CHANNEL SEARCH
2 ADD/REMOVE CHANNELS
¥ If you use a basic hookup, check the VCR indicator in
display panel Ñ it should be on. Press TV•VCR to turn
it on.
3 SIGNAL TYPE:
CABLE
AUTO CHANNEL SEARCH
NOW SCANNING CHANNEL 14
PRESS ANY KEY TO CANCEL
¥ Check the connections.
B. Press 3 to display the CHANNELS menu.
C. Press 1 to begin AUTO CHANNEL SEARCH.
The VCR automatically selects the CABLE (cable TV) or
ANTENNA signal
To change the SIGNAL TYPE:
A. Follow steps A-B above.
B. Press 3 to switch the SIGNAL TYPE between CABLE and
ANTENNA.
6.Add or remove channels from the VCR’s memory.
You may want to add or remove channels if some of the
channels are not active, have weak signals, or you do not
want to watch them.
VCR MAIN MENU
1 TIMER RECORDINGS
2 TIME
3 CHANNELS
A. Press MENU on the remote to display the VCR MAIN
CHANNELS
MENU.
1 AUTO CHANNEL SEARCH
2 ADD/REMOVE CHANNELS
B. Press 3 to display the CHANNELS menu.
C. Press 2 to display the ADD/REMOVE CHANNEL display.
D. Follow the directions on the screen.
ADD/REMOVE CHANNELS
CHANNEL 03
IS PRESENTLY ADDED
E. Add or remove more channels using the CHANNEL up
and down buttons.
PRESS CLEAR TO REMOVE
PRESS MENU TO EXIT
8
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Startup
7. Select the language/Seleccione el idioma/
Sélectionner la langue.
The VCR displays the on-screen menus in the English, Spanish or
VCR MAIN MENU
French language. The word ÒLanguageÓ cycles through the
different languages when the VCR Main Menu is displayed on the
TV screen.
1 TIMER RECORDINGS
2 TIME
3 CHANNELS
4 PREFERENCES
5 LANGUAGE
A. Press MENU on remote to display the VCR MAIN MENU.
LANGUAGE
B. Press 5 to display the LANGUAGE or IDIOMA or
LANGUE menu. (English: LANGUAGE; Spanish: IDIOMA;
French: LANGUE).
SELECT A LANGUAGE.
1➛ENGLISH
2 ESPAÑOL
3 FRANÇAIS
¥ Press 1 to have the menus displayed in English (Ingles).
¥ Press 2 to have the menus displayed in Spanish (Espa–ol).
¥ Press 3 to have the menus displayed in French (Fran•ais).
PRESS MENU TO CONTINUE
8.Use TV•VCR button.
Skip this step if you used one of the advanced hookups.
When using one of the basic hookups, the TV•VCR button lets you
switch between the picture coming from the VCR or television
channels. Also, this button lets you record a program on the VCR
while watching another channel on the TV. Details are on page 17.
A. Press TV•VCR to see the picture from the VCR.
The VCR indicator lights in the display panel.
B. Press CHANNEL up or down to change channels on the VCR.
The channel number changes on the TV screen.
C. Press TV•VCR to see the TV channels.
The VCR indicator does not light in the display panel.
Change channels using the TVÕs remote.
D. Return the TV to the VCR viewing channel Ñ CH3 or CH4.
E. Press TV•VCR to switch back to the picture from the VCR.
9.Set the ALERT SOUND feature.
Select this feature if you want a warning to sound each time an
invalid entry or invalid operation is made. This feature is set to
OFF. Please note the warning sound is heard only when the VCR
is on.
VCR MAIN MENU
1 TIMER RECORDINGS
2 TIME
3 CHANNELS
4 PREFERENCES
PREFERENCES
A. Press MENU on the remote to display VCR MAIN MENU.
1 REMOTE CONTROL: VCR1
B. Press 4 to display the PREFERENCES menu.
2 AUTO PLAY:
ON
3 ALERT SOUND:
OFF
C. Press 3 to select ALERT SOUND: ON or OFF.
¥ Select ON if you want to hear a warning.
0 EXIT
¥ Select OFF if you do not want to hear a warning.
9
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting Up the VCR
Startup
10. Set the time and date.
VCR MAIN MENU
The TIMER indicator on the VCR front panel flashes until the
1 TIMER RECORDINGS
2 TIME
time is set.
TIME
A. Press MENU on remote to display the VCR MAIN MENU.
B. Press 2 to display the TIME menu.
C. Press 1 to display SET TIME AND DATE.
1 SET TIME AND DATE
SET TIME AND DATE
TIME --:-- --
(HH:MM)
D. Enter the time and date with the number buttons on the
remote.
DATE --/--/--
¥ Press 0 before single-digit numbers.
Example: press 0, then 5, then 0, then 7 for a time
PRESS MENU TO CANCEL
of 5:07. Press 1 for AM or 2 for PM.
¥ Press CLEAR on the remote to change incorrect entries.
SET TIME AND DATE
TIME 09:39 AM
E. Press MENU to start the clock.
F. Press 0 twice to exit.
DATE 08/04/96 SUNDAY
The time and date appear on the screen when you press
DISPLAY.
PRESS CLEAR TO CORRECT
PRESS MENU TO SET
11. Set the Automatic Daylight-Saving Time
Select this feature if you want the VCRÕs clock automatically to
advance one hour in April and reverse one hour in October.
VCR MAIN MENU
1 TIMER RECORDINGS
2 TIME
A. Press MENU on the remote to display the VCR MAIN MENU.
B. Press 2 to display the TIME menu.
TIME
1 SET TIME AND DATE
2 AUTO DST:
ON
C. Press 2 to select AUTO DST: ON or OFF.
¥ Select ON if you want the VCRÕs clock to automatically
adjust for Daylight Saving Time.
¥ Select OFF if you do not want the VCRÕs clock to
0 EXIT
automatically adjust for Daylight Saving Time.
In the Spring, daylight-saving time begins on the first
Sunday in April. Clocks are set forward one hour.
Because the clock automatically changes from 2:00 AM to
3:00 AM, keep in mind that any part of a scheduled Timer
Recording that falls between these two times is not
performed.
In the autumn, daylight-saving time begins on the last
Sunday in October. Clocks are set back one hour.
The VCR clock automatically changes from 2:00 AM to
1:00 AM. Therefore, it can affect your recording length.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
Using the Remote Control
VCR Function Buttons
CHAN (CHANNEL) Up or Down
PLAY
Selects the next higher or lower
channel in the VCRÕs channel
memory.
Plays a tape.
POWER
Turns the VCR on and off.
CLEAR
Resets the time counter to 0:00:00.
PREV CH (Previous Channel)
POWER
Switches between two channels.
Lets you change entries when setting
the time or VCR for a timer
recording.
TV•VCR PREV CH DISPLAY
Select one channel, then select
another. Press PREV CH to switch
between the two channels.
PAUSE
PLAY
REC
DISPLAY
Shows the VCR operating displays
on the TV screen.
REC
Starts the VCR recording. See page 17.
REW
FF
Displays the time counter when a
tape is inserted.
Used for Express recording. See
page 18.
FF (Fast Forward)
SLOW
STOP
3
SEARCH
CHAN
REW (Rewind)
Fast forwards the tape when the
VCR is stopped.
1
2
Rewinds the tape when the VCR is
stopped.
Searches the picture in forward
motion during playback.
4
7
5
8
6
9
Searches the picture in reverse
motion during playback.
F. ADV (Frame Advance)
SEARCH
Lets you view one frame with each
press of the button when the tape is
in pause mode.
Displays the INDEX and ZERO
search menus on TV.
0
CLEAR
INPUT
MENU
Advances the tape 60 seconds during
playback.
INPUT
SPEED
F. ADV
Turns the line input on or off.
SLOW
Line input refers to the signal
coming from the component
connected to the audio/video jacks
on the back of the VCR.
Plays a tape in slow-motion.
TRACKING
SPEED (Tape Speed)
Selects a recording speed (SP, SLP).
MENU
STOP
Displays the VCR MAIN MENU on
Stops the VCRÕs normal functions
such as record, playback, rewind,
fast forward, and pause.
the TV screen.
Removes a menu from the screen.
Numbers (0 through 9)
TRACKING Up or Down
Selects a channel up to 99Ñpress two
numbers.
Reduces the streaks that may appear
on the picture during play or pause.
Selects a cable channel over 99Ñ
press and hold 1 until 1-- appears on
the screen. Then, press the other two
numbers.
For model VR508, reduces picture
ÓjitterÓ during pause.
TV•VCR
Switches the picture signal so that it
either comes from the VCR or the TV
channel. See page 9.
PAUSE
Pauses action for viewing during
playback.
Pauses recording to prevent
recording of unwanted scenes.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Tape
Playback
To play a tape
1. Turn on the TV and tune it to channel 3, 4, or the TVÕs video input to see the
picture from the VCR.
2. Insert a tape in the VCR.
The VCR automatically turns on. The POWER and VCR indicators light. The
tape automatically begins playback if the safety tab on the cassette has been
removed and the AUTO PLAY feature is turned on.
POWER
VCR
TIMER
RECORD
PAUSE
RECORD
POWER
STOP•EJECT
TV•VCR
CHANNEL
TRACKING
REW
PLAY
FWD
Safety Tab
3. Press PLAY on the remote or the VCR, if necessary.
4. Press TRACKING up or down on the remote or the VCR to remove any streaks
from the picture if necessary. Details are on page 16.
5. Press STOP•EJECT on the VCR or STOP on the remote.
6. Press REW on the VCR or the remote.
End of Tape
The VCR automatically rewinds the tape if it reaches the end of the tape during
playback.
Power Off
If you press POWER while a tape is rewinding, the VCR turns off automatically
when it is completely rewound. REWIND➛POWER OFF is displayed on the TV
screen.
7. Press STOP•EJECT on the VCR to eject the tape once it is completely rewound.
12
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Tape
Using the Playback Features
AUTO PLAY Feature
This feature allows the VCR to automatically start playing when you insert a tape with
the safety tab removed.
VCR MAIN MENU
1. Press MENU on the remote to display the VCR MAIN
1 TIMER RECORDINGS
2 TIME
MENU.
3 CHANNELS
4 PREFERENCES
2. Press 4 to display the PREFERENCES menu.
PREFERENCES
3. Press 2 to select AUTO PLAY: ON or OFF.
1 REMOTE CONTROL: VCR1
¥
Select ON if you want to have a tape with its safety tab
removed to start playing automatically.
2 AUTO PLAY:
ON
3 ALERT SOUND:
OFF
¥
Select OFF if you do not want a tape with its safety
tab removed to start playing automatically.
0 EXIT
Picture Search
You can search for a specific tape location during playback by fast forwarding or
rewinding the tape. Sound is turned off during picture search. The time counter is
removed from the TV screen during picture search. For model VR337, picture search
works best for tapes recorded in the SLP speed. For model VR508, picture search works
best for tapes recorded in the SP or SLP speed.
Fast Forward Search
1. Press FF to search forward at a faster-than-normal speed.
2. Press FF or PLAY to return to playback.
Rewind Search
1. Press REW to search backward at a faster-than-normal
speed.
2. Press REW or PLAY to return to playback.
Slow Motion
You can view a tape in slow motion during play or play pause. Sound is turned off
during slow-motion playback. For model VR337, slow motion works best for tapes
recorded in the SLP speed. For model VR508, slow motion works best for tapes recorded
in the SP or SLP speed.
1. Press SLOW to begin slow-motion playback.
2. Use TRACKING up or down to remove any streaks from
the picture.
3. Press PLAY to return to playback.
The VCR automatically switches from slow-motion
playback to stop after a few minutes.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Tape
Using the Playback Features
DISPLAY Button
The DISPLAY button shows the status of the VCR channel number, time counter,
date, time and tape speed on the TV screen. The time and date must be set before
they can be displayed.
STOP CH 05 0:30:00
Press
DISPLAY
Status Displays
1. Press DISPLAY.
If you do not press DISPLAY again, this display
times out.
08/04/96 SUN 01:30AM SLP
2. Press DISPLAY again to display only the time
counter on the TV screen.
0:30:00
Hours
3. Press DISPLAY again to return to TV viewing.
Minutes
Seconds
Turning off the VCR automatically returns the
displays to normal.
Press
DISPLAY
Again
Time Counter Only
No Display
Press
DISPLAY
Again
Time Counter
The time counter shows the actual time it takes to record a program or play back a
segment of a prerecorded tape. It helps locate the beginning or end of programs
you taped. The time counter resets to 0:00:00 when the tape is ejected from
the VCR.
0:30:00
For example, if you record a 30-minute program at the beginning of the tape and
you want to go to the end of that program to begin another recording,
you would:
1. Insert the prerecorded tape.
2. Press DISPLAY twice to display only the time
counter on the TV screen.
3. Press FF to fast forward the tape until 0:30:00
appears in the time counter and press STOP.
The time counter is removed from the TV screen
during fast forward.
The time counter does not advance when it
detects no signal (blank tape).
4. Press CLEAR to reset the time counter to 0:00:00.
5. Press DISPLAY to remove the time counter from
the screen.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Tape
Using the Playback Features
Index Search
The VCR has a ÒVHS Index Search SystemÓ that automatically records an index mark on
the tape every time you begin recording a program. Your VCR has two index playback
features. To locate the program you want to play, select a specific index number or search
by scanning.
Some index marks may be missed by the VCR.
INDEX SEARCH
¥
¥
A mark too close to the current location on the tape.
PRESS REW OR FF
TO BEGIN SCANNING
OR
ENTER A SPECIFIC
INDEX NUMBER
--
The mark at the beginning of a recorded segment of five
minutes or less.
¥
The first index mark on the tape when you start
searching from the beginning of the tape.
PRESS SEARCH TO EXIT
To Index Search
INDEX SEARCH
1. Insert the prerecorded tape and press STOP.
SEARCHING FOR
INDEX MARKS...
2. Press SEARCH on the remote to display the INDEX
SEARCH menu on the TV screen.
3. Press REW or FF on the remote to scan or enter the
number of index marks you want the VCR to search.
Press CLEAR on the remote to correct an entry.
PRESS STOP TO CANCEL
Once the index mark or marks is found, the tape will
begin playback.
4. Follow the directions on the screen.
Zero Search
The zero search feature allows the VCR to quickly return to a counter reading of 0:00:00
anywhere on the tape. This is especially convenient when you want to watch a segment
of the tape several times.
ZERO SEARCH
1. Insert the prerecorded tape.
CURRENT TAPE COUNTER IS
2:17:25
2. Press DISPLAY twice to display only the time counter on
PRESS REW TO GO TO
0:00:00
the TV screen.
PRESS SEARCH TO EXIT
3. Use PLAY, FF, or REW to advance to the place on the
tape where you want to return quickly.
4. Press CLEAR to reset the time counter to 0:00:00.
5. Continue playing the tape.
6. Press STOP.
ZERO SEARCH
CURRENT TAPE COUNTER IS
-2:17:25
PRESS FF TO GO TO
0:00:00
7. Press SEARCH twice to display the ZERO SEARCH
PRESS SEARCH TO EXIT
menu on the TV screen.
8. Follow the directions on the screen.
Commercial Scan (SEARCH Button)
This is useful for scanning commercials or short program segments.
Press SEARCH during playback to advance the tape
approximately one minute or press SEARCH twice for two
minutes.
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Playing a Tape
Using the Playback Features
Pause for Stop Action
This feature stops the tape in action and lets you examine the details of the scene. For
model VR337, stop action works best for tapes recorded in the SLP speed. For model
VR508, stop action works best for tapes recorded in the SP or SLP speed.
1. Press PAUSE during playback to stop the action.
2. For model VR337, if horizontal lines or noise bars appear
in the picture, press SLOW on the remote and then press
TRACKING up or down to move the lines out of the
picture.
For model VR508, press TRACKING up or down on the
remote to reduce any jittering of the picture.
3. Press PAUSE or PLAY to return to playback.
The VCR automatically switches from stop-action
playback to stop after a few minutes.
Frame Advance (F. ADV Button)
Frame advance lets you view one stop-action frame after another. For model VR337, frame
advance works best for tapes recorded in the SLP speed. For model VR508, frame advance
works best for tapes recorded in the SP or SLP speed.
1. Press PAUSE during playback to stop the action.
2. Press F. ADV each time you want to view a frame of the
scene.
3. Press PAUSE or PLAY to resume normal playback.
Automatic Tracking
The VCR has automatic tracking which adjusts the picture when you are playing back a
tape recorded on another VCR. Automatic tracking is turned on when a tape is inserted
or the VCRÕs power is turned on.
Manual Tracking
Occasionally, you may need to manually adjust tracking on a tape recorded on a
different VCR or camcorder. Tracking is used when playing a tape, and it has no
effect during recording.
¥
When streaks or snow appear in the picture,
press TRACKING up or down on the remote
or the VCR for the best possible picture.
¥
For model VR508, during pause, press
TRACKING up or down on the remote to
reduce any jittering of the picture.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Recordings
Your VCR provides different recording options. These options are explained in this section of the manual.
Recording Speeds
Press SPEED on the remote to select a recording speed (SP or SLP). The speed
you select appears on the TV screen. Tapes recorded in LP can be played in this
VCR.
SP (Standard Play) gives the best quality recording. That is why most
prerecorded, rental tapes are recorded in SP. Fewer programs can be recorded
on the tape. Special effects such as pause, frame advance, slow motion, and
picture search work well in this speed.
SLP (Super Long Play) gives three times the recording time of tapes recorded
in SP. Special effects such as pause, frame advance, slow motion, and picture
search work well in this speed.
Recording Time
Cassette
T-120
SP
2Hrs
SLP
6Hrs
8Hrs
T-160
2Hrs 40Min
Normal Recording
To Make a Recording
Turn on the TV and tune it to the VCR viewing channel, either 3, 4, or the TVÕs
video input channel.
1. Insert a tape with its safety tab in place.
2. If you are using one of the basic hookups, make sure the VCR indicator
lights in the VCRÕs display panel. If not, press TV•VCR to turn it on.
3. Use SPEED on the remote to select a recording speed.
The tape speed indicator appears on the TV screen.
4. Select the channel to be recorded.
The channel number appears on the TV screen.
5. Press RECORD on the VCR or REC on the remote to begin recording.
The RECORD indicator lights in the VCRÕs display panel while the VCR is
recording.
Watch a TV Channel While VCR is Recording a Different Channel
For some cable box hookups, this recording feature may not apply. Contact
your local cable company for assistance.
1. Follow steps 1 through 5 above.
2. If you are using one of the basic hookups, press TV•VCR to switch to the
TV channel.
The VCR indicator turns off in the display panel.
3. Select the channel you want to watch with the TVÕs channel buttons.
4. Press STOP•EJECT on the VCR or STOP on the remote when the
recording is finished.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Express Recording
Express recording lets you record up to four hours without using the timer program feature. The VCR
turns off automatically at the end of the recording.
POWER
VCR
TIMER
RECORD
PAUSE
RECORD
POWER
STOP•EJECT
TV•VCR
CHANNEL
TRACKING
REW
PLAY
FWD
RECORD
1. Turn on the VCR.
2. Insert a tape with its safety tab in place.
3. Select the channel you want to record.
4. Use SPEED on the remote to select a recording speed.
5. Press REC on the remote or RECORD on the VCR to activate recording.
6. Press RECORD or REC repeatedly until the amount of recording time for
the program is displayed on the TV screen.
Each press of RECORD or REC increases the time Ñ 30 minutes up to 4
hours.
Press
RECORD
Recording
Time
REC
CH 06
0:30
1:00
1:30
2:00
3:00
4:00
(30 Min)
(1 Hr)
RECORD LENGTH 0:00
(1 Hr, 30 Min)
(2 Hrs)
PRESS REC TO SET LENGTH
(3 Hrs)
(4 Hrs)
Display on TV Screen
Normal Record
The RECORD and TIMER indicators light in the VCRÕs display panel.
During recording, press RECORD on the VCR or REC on the remote to
display the time remaining on the TV screen. Press RECORD or REC again
to increase the recording time.
Stopping an Express Recording in Progress
You can stop a recording by:
¥ Pressing and holding the STOP button on the remote or STOP•EJECT on
the VCR for approximately three seconds.
¥ Pressing the RECORD button until 0:00 is displayed for the recording.
18
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Recording While You’re Away (Timer Recording)
The timer program feature lets you program the VCR to record up to eight different programs
within a one year period. Before setting the timer, make sure that:
¥
¥
The clock is set correctly.
A tape with a safety tab has been inserted with enough tape to
record the programs.
Setting a Timer Recording
VCR MAIN MENU
1. Press MENU on the remote to display the VCR MAIN MENU.
1 TIMER RECORDINGS
2. Press 1 to display the TIMER RECORDINGS menu.
3. Press 1 to display the CREATE A NEW PROGRAM menu.
4. Press 1, 2, 3, or 4 to select type of program.
TIMER RECORDINGS
1 CREATE A NEW PROGRAM
HOW OFTEN SHOULD THIS
PROGRAM RECORD?
1 ONE TIME Ñ single program recorded once.
1 ONE TIME
2 DAILY Ñ program recorded at same time every day.
PROGRAM 1 (ONE TIME)
3 WEEKDAYS Ñ program recorded at same
CHANNEL
--
time Monday through Friday.
PROGRAM 1 (ONE TIME)
CHANNEL 08
4 WEEKLY Ñ program recorded at same time
once a week.
START TIME --:-- --
5. Press number buttons on the remote to enter the channel
number (or INPUT on the remote to select line input), start
time including AM or PM, end time, start date, and recording
speed of the recording. Follow the on-screen prompts.
PROGRAM 1 (ONE TIME)
CHANNEL
START TIME 02:10 PM
END TIME 03:35 PM
08
START DATE 08/04/96
TAPE SPEED SLP
1=SP 2=SLP
Press CLEAR on the remote to correct an entry.
PRESS CLEAR TO CORRECT
PRESS MENU TO SAVE
6. Press MENU to enter your program.
If you have entered two programs whose times overlap.
PROGRAMS OVERLAP appears on the screen.
7. Repeat steps 3–6 for additional programs and follow the
PROGRAM 1 HAS BEEN SAVED
directions on the screen.
REMEMBER TO INSERT A
RECORDABLE TAPE AND
TURN THE VCR OFF BEFORE
THE PROGRAM START TIME.
8. If you are using a cable box, leave it turned on and tuned to the
channel you want to record. Otherwise, turn off the VCR
before recording begins.
Stopping a Timer Recording
You can stop a recording by pressing and holding the STOP
button on the remote or STOP•EJECT on the VCR for
approximately three seconds.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Recording While You’re Away (Timer Recording)
Timer Recording From the VCR’s Line Input
The line input refers to the signal coming from the AUDIO1 and
PROGRAM 1 (ONE TIME)
CHANNEL VIDEO
START TIME --:-- --
END TIME --:-- --
VIDEO1 IN jacks of the VCR. Recording from the line input is
convenient if you have a satellite receiver or similar component
attached to these jacks.
START DATE --/--/--
TAPE SPEED SLP
To timer record from the component connected to the VCRÕs line
input, press INPUT or “0,0” on the remote to enter VIDEO in the
channel number position.
PRESS CLEAR TO CORRECT
PRESS MENU TO EXIT
Checking or Clearing Timer Recordings
1. Press MENU on the remote to display the VCR MAIN MENU.
2. Press 1 to display the TIMER RECORDINGS menu.
3. Press 2 to display the programÕs menu.
VCR MAIN MENU
1 TIMER RECORDINGS
TIMER RECORDINGS
1 CREATE A NEW PROGRAM
2 REVIEW EXISTING PROGS.
4. Press MENU for next program or CLEAR to erase the
program.
PROGRAM 1
CHANNEL
(ONE TIME)
08
START TIME 02:10 PM
END TIME 03:35 PM
START DATE 08/04/96 SUN
TAPE SPEED SLP
PRESS CLEAR TO ERASE
PRESS MENU FOR NEXT PROG
Using the Recording Features
Recording Pause
To prevent recording short passages of unwanted material, use PAUSE during recording to
stop and start recording. The VCR automatically switches from pause to stop after a few
minutes.
Pro-Tect Plus™ (Child Lock) Feature
This feature is useful to tamper proof your timer recordings from unwanted changes and/or
protect the VCR from misoperation by other users in the household. It also prohibits all
operations of the VCR once the feature is turned on.
To Lock the VCR
Press and hold POWER on the remote for approximately six
seconds to turn on the Pro-Tect Plusª feature.
The TIMER and RECORD indicators on the front panel flash to
let you know the feature is activated. After the feature is turned
on, momentarily pressing POWER also causes the indicators to
flash.
To Unlock the VCR
Press and hold POWER on the remote for approximately six
seconds to unlock the VCR. The VCR turns on.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Recording a Program
Using Two VCRs for Copying and Editing Tapes
Operating Instructions (Refer to hookup on page 6.)
Use one VCR as the playback VCR and the other as the recording VCR.
1. Turn on the TV and VCRs.
2. Tune the TV to the VCR viewing channel, either 3, 4, or the TVÕs
video input.
Caution: The unauthorized
recording of television
3. If you connected your VCR using Option A (page 6), tune the
programs and other
materials may infringe the
rights of others.
recording VCR to channel 3 or 4 Ð the one selected on the back of
the playback VCR.
If you connected your VCR using Option B (page 6), press INPUT
(or channel 00) on the recording VCRÕs remote to select the line
input.
4. Insert the tape you want to copy into the playback VCR. Insert a
blank tape with its safety tab in place into the recording VCR.
5. Press PLAY, then PAUSE on the playback VCR when you reach
the point on the tape or program where you want to begin
copying. If the tape was not recorded on the playback VCR,
streaks may appear and you may need to adjust tracking.
6. Press RECORD on the VCR or REC on the remote, then PAUSE
on the recording VCR.
7. Press PAUSE on both VCRs at the same time to begin copying
the tape.*
8. Edit out segments that you do not want to copy by pressing
PAUSE on the recording VCR to stop copying the tape. Then,
locate the next segment you want to copy on the playback VCR
by using FWD, REW, and PLAY. Press PAUSE on the playback
VCR. Press PAUSE at the same time on both VCRs to resume
copying.
9. Press STOP•EJECT on both VCRs when you are finished.
*You may turn off the TV after the recording has started as it does
not have to be on to copy a tape.
Copying and Editing Tapes Using Compatible Remote
If you have a compatible RCA, ProScan or GE remote with VCR1 and VCR2 buttons, you can
program this VCR to respond to either VCR1 or VCR2. This lets you control both VCRs with one
remote for easier copying and editing.
VCR MAIN MENU
1 TIMER RECORDINGS
2 TIME
3 CHANNELS
4 PREFERENCES
Set the REMOTE CONTROL feature of this VCR to VCR1 or VCR2 position. Then, the
compatible remote controls the VCR with either the VCR1 or VCR2 button Ñ depending on the
position you select in the menu.
PREFERENCES
1. Press MENU to display the VCR MAIN MENU.
1 REMOTE CONTROL: VCR1
2. Press 4 to display PREFERENCES.
PREFERENCES
3. Press 1 to activate the REMOTE CONTROL: VCR1 or VCR2
( PRESS VCR2 TO CHANGE )
2 AUTO PLAY:
ON
feature.
3 ALERT SOUND:
OFF
4. Press VCR1 or VCR2 on your compatible VCRÕs remote to
change the setting and program this VCR to respond to VCR1 or
VCR2 Ñ depending on the position you selected in step 3.
0 EXIT
21
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Location of Controls
Front Panel
Tape Compartment
POWER
VCR
TIMER
RECORD
PAUSE
RECORD
FWD
REW
PLAY
POWER
STOP•EJECT
TV•VCR
CHANNEL
TRACKING
Remote Sensor
Remote Sensor
CHANNEL or TRACKING up or down
Receives signals from the remote control.
Aim the remote at this sensor with no
objects between them.
Selects next higher or lower channel in the VCRÕs
channel memory.
Adjusts tracking during playback.
REW
FWD (Fast Forward)
Rewinds the tape when the VCR is
stopped.
Fast forwards the tape when the VCR is stopped.
Searches the picture forward during playback.
Searches the picture in reverse during
playback.
PAUSE
Pauses the tape for stop-action viewing during
playback.
STOP•EJECT
Stops the normal functions such as record,
playback, rewind, fast-forward, or pause.
Pauses the tape during recording to prevent
recording unwanted material.
Press when the VCR is stopped to eject the
cassette.
PLAY
Plays a tape.
TV•VCR
Switches the picture signal so that it either
comes from the VCR or the TV channel.
See page 9.
POWER
Turns the VCR on or off.
RECORD
Start the VCR recording.
Used for express recording.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Location of Controls
Back Panel
IN FROM
ANT.
VHF/UHF
AUDIO1
OUT
IN
VIDEO1
OUT
IN
OUT TO TV
3 CH. 4
3CH.4 Switch
VIDEO1 IN and AUDIO1 IN Jacks
Selects the channel to which you tune the TV to see
the VCR picture if you connect the VCR using one
of the basic hookups.
Receive signals from another component like a
VCR or camcorder when it is connected to these
jacks. Use INPUT (or channel 00) on the remote
to select.
IN FROM ANT. (Antenna) Connector
VIDEO1 OUT and AUDIO1 OUT Jacks
Receives a signal from an antenna or cable system
when attached.
Send signals from VCR to another component like
a VCR or camcorder when it is connected to
these jacks.
OUT TO TV Connector
Passes signal to TV using the cable supplied.
Display Panel
POWER
VCR
TIMER
RECORD
POWER Indicator
VCR Indicator
Lights when the VCR is turned on.
Lights when using the TV•VCR button.
When using one of the basic hookups:
RECORD Indicator
•
The picture is coming from the VCR when the
Lights when the VCR is recording.
VCR indicator is on.
•
The picture is coming from the television
channels when the VCR indicator is off.
TIMER Indicator
Shows VCR is set for timer recording when VCR is
turned off.
Flashes when the clock is not set.
Flashes when a timer recording is set and there is
no cassette in the VCR.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Specifications
Format:
VHS
Record/Playback
Video: 2-Head (VR337)
System:
Video: 4-Head (VR508)
Audio: Mono record/playback system
Video Signal System:
Antenna:
EIA standard: NTSC color
75-ohm external VHF/UHF combined
antenna terminal
Tuner:
USA:
181 channels capability*
(125 cable channels)
Canada: 178 channels capability*
(122 cable channels)
Type:
AutoProgramming frequency synthesis
120V AC, 60 Hz
Power Requirement:
Power Consumption:
Dimensions:
18 watts
3.5 inches high
(89 mm)
15 inches wide
(380 mm)
11.2 inches deep
(285 mm)
Weight:
8.4 pounds
(3.8 kg)
Storage Temperature
Range:
- 22 F to +149 F
û
û
Operating
Temperature Range:
+41 F to +104 F
û
û
*Check your cable companyÔs compatibility requirements.
Cleaning the VCR
Use a soft cloth or dusting attachment of your vacuum cleaner to dust your
VCR. Remove dust from the ventilation holes on the top, back, sides, and
bottom of the cabinet.
Plastic surfaces are easily scratched and can be marred by alcohol and various
solvents. Avoid excessive use of oil-based furniture polishes since the
materials used in the cabinet will accumulate more dust. We recommend using
a non-abrasive, anti-static cleaner and polisher.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Limited Warranty
What your warranty covers:
¥
Any defect in material or workmanship.
For how long after your purchase:
¥
Ninety days for labor charges.
¥
One year for parts.
The warranty period for rental units begins with the first rental.
What we will do:
¥
¥
Pay any Authorized RCA VCR Servicenter the labor charges to repair
your VCR.
Pay any Authorized RCA VCR Servicenter for the new or, at our option,
refurbished replacement parts required to repair your VCR.
How you get service:
¥
Take your VCR to any Authorized RCA VCR Servicenter. To identify
your nearest Authorized RCA VCR Servicenter, ask your dealer, look in
the Yellow Pages, or call 1-800-336-1900.
¥
¥
Show the service technician your evidence of purchase date.
Pick up your VCR when repairs are completed.
What your warranty does not cover:
¥
Customer instruction. (Your OwnerÕs Manual clearly describes how to
install, adjust, and operate your VCR. Any additional information should
be obtained from your Dealer.)
¥
¥
¥
¥
¥
¥
Installation and related adjustments.
Signal reception problems not caused by your VCR.
Damage from misuse or neglect.
Cleaning of video/audio heads.
Remote control batteries.
A VCR that has been modified or incorporated into other products or is
used for institutional or other commercial purposes.
¥
¥
A VCR purchased or serviced outside the USA.
Acts of God, such as but not limited to lightning damage.
Product Registration:
¥
Please complete and mail the Product Registration Card packed with
your VCR. It will make it easier to contact you should it ever be
necessary. The return of the card is not required for warranty coverage.
How state law relates to this warranty:
¥
This warranty gives you specific legal rights, and you also may have
other rights that vary from state to state.
If you purchased your VCR outside the United States:
¥
This warranty does not apply. Contact your dealer for warranty
information.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Trouble Checks
Sometimes problems can be easily solved by checking a few basic things. Check below before
you call for help or take your VCR to an Authorized RCA VCR Servicenter.
Trouble
Here's what to try:
No power
¥ Plug VCR into an operating outlet.
¥ Check connections.
VCR does not respond to remote
¥ Remove batteries and hold down one or more buttons for several seconds to
drain the microprocessor inside the remote and reset it. Re-install the
batteries and try remote again.
¥ Aim remote at VCR with no objects between them.
¥ Change batteries.
¥ Check setting of REMOTE CONTROL: VCR1 (VCR2) feature. See page 22.
¥ Check the Pro-Tect Plusª feature.
Poor or no picture for normal TV viewing
Snowy or no picture during playback
¥ Press TV•VCR to turn VCR indicator off.
¥ Switch TV to an active channel.
¥ Check antenna connections.
¥ Press TV•VCR to turn VCR indicator on.
¥ Check TV channel selected (3 or 4) to make sure it matches the channel
selected with 3CH.4 switch on back of VCR.
¥ Check TVÕs fine tuning.
¥ Check video cable connections between VCR and TV monitor.
¥ Set TV monitor to video input channel.
¥ Try another tape.
¥ Some snow/streaks are normal during search, stop action, frame advance,
and slow-motion playback.
Streaks in picture during normal playback
¥ Press the TRACKING button on the remote or the VCR to move streaks for
the best picture.
¥ Check tape Ñ it may be worn out or of poor quality.
Time counter not working or time counter does
not change during zero search feature
¥ The time counter does not advance during unrecorded portions of tape.
When an unrecorded segment of tape is encountered, the time counter will
hold its count until recorded material is detected again.
¥ A minus (Ð) appears in front of the time if you rewind the tape farther back
than a counter reading of 0:00:00.
¥ Time counter only appears when a tape is in the VCR.
Will not record or play
¥ No cassette in VCR.
¥ Eject and reinsert cassette.
¥ Broken tape Ñ try another cassette.
¥ VCR is in pause mode. Press PAUSE during recording or playback.
¥ Check the Pro-Tect Plusª feature.
Will not record
¥ Safety tab removed from cassette.
¥ Make sure the line indicator (VIDEO) does not appear on the TV screen for
normal recording from the VCRÕs tuner. Press INPUT on the remote to turn
the line input off.
¥ Check the Pro-Tect Plusª feature.
¥ Tape already rewound.
Rewind does not operate
26
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Trouble Checks
Trouble
Here's what to try:
Timer recording not made
or wrong program recorded
¥ Cable box was not turned on at time recording was to begin.
¥ Program entered incorrectly (wrong channel or times).
¥ Power interruption. Reset clock. See page 10.
¥ Check to see if time and date are correct Ñ including AM/PM.
¥ Program exceeded tapeÕs length or tape was not rewound beforehand.
¥ VCR was not turned off at the time recording was to start.
¥ No tape in VCR or cassetteÕs safety tab broken off.
Incorrect time or date
¥ Clock was not set accurately (check AM/PM and date). See page 10.
Time did not adjust for daylight savings
VCR makes noise when stopped
¥ Check if AUTO DST is turned on.
¥ VCR is removing tape from heads. This is normal. The head cylinder inside
the VCR continues to rotate for a few minutes after you put the VCR in the
stop mode.
Will not Auto Channel Search correctly
Cannot select channels over 69
¥ Check antenna connections.
¥ Check SIGNAL TYPE: CABLE/ANTENNA feature. See page 8.
¥ Cable channels over 69 can only be selected if SIGNAL TYPE:
CABLE/ANTENNA feature is set to CABLE. Details are on page 8.
Cassette with safety tab removed does not start to
play automatically
¥ Set AUTO PLAY ON/OFF feature to ON. Details are on page 14.
Tape plays back in slow motion
¥ Press PLAY to return to normal playback.
TIMER indicator flashes
¥ Clock was not set. See page 10.
¥ Timer recording programmed and no cassette in VCR.
On-screen menus are in English, French, or
Spanish.
¥ Check LANGUAGE feature. See page 9.
Time counter disappears while searching
¥ This is normal. Details are on page 15.
27
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Index
3CH.4 Switch...................................................3-7,9,23
Accessories, Included ................................................7
Add or Remove Channels from Memory...............8
ADD/REMOVE CHANNEL Menu............................8
ALERT SOUND Feature..........................................11
Antenna Connections .............................................2,3
AUDIO1/VIDEO1 IN Jacks...............................6,20,23
AUDIO1/VIDEO1 OUT Jacks............................3-6,23
AUTO CHANNEL SEARCH Feature.......................8
AUTO DST Feature..................................................10
AUTO PLAY Feature................................................13
Back Panel .................................................................23
Batteries, Inserting in Remote ..................................7
Cable System With Cable Box Connections.....2,4,5
Cable System Without Cable Box Connections ..2,3
CHAN Buttons...................................................8,11,22
Channel 00............................................................20,21
CHANNELS Menu .....................................................8
Checking Timer Recordings ...................................20
Checks, Trouble...................................................26,27
Child Lock Feature...................................................20
Choosing a Hookup...................................................2
Cleaning the VCR.....................................................24
CLEAR Button .................................10,11,14,15,19,20
Clearing Timer Programs........................................20
Commercial Scan......................................................15
Compatible Remotes................................................21
Connections .............................................................2-6
Antenna .............................................................2,3
Audio/Video Jacks.......................................2,3-6
Cable-TV ........................................................2,3-5
Two VCRs ............................................................6
Contents.......................................................................1
Copying Tape, Connections .....................................6
Copying Tapes..........................................................21
Daylight-Saving Time..............................................10
Date and Time, Setting ............................................10
Design Specifications...............................................24
DISPLAY Button.............................................11,14,15
Display Panel............................................................23
Editing Tapes............................................................21
English Language.......................................................9
F. ADV (Frame Advance) Button......................11,16
F F (Fast Forward) Button.......................11,13-15,21
FWD (Fast Forward) Button....................13-15,21,22
Frame Advance Feature ..........................................16
French Language........................................................9
Front Panel ................................................................22
Hookups
INPUT Button..................................................11,21,23
LANGUAGE/IDIOMA/LANGUE Menu....................9
Language, Selecting ...................................................9
Langue .........................................................................9
Limited Warranty.....................................................25
Line Input, Recording From ...................................20
Location of Controls
Remote Control .................................................11
VCR Back Panel.................................................23
VCR Display Panel............................................23
VCR Front Panel................................................22
LP Speed....................................................................17
MENU Button .........................................8-11,14,19-21
Normal Recording....................................................17
Number Buttons.......................................................11
Operating Instructions
Copying Tapes...................................................21
Express Recording ............................................18
Normal Recording ............................................17
Playing a Tape ...................................................12
Timer Recording...........................................19,20
OUT TO TV Connector......................................3-6,23
PAUSE Button..........................................11, 16,20-22
Pause for Stop Action ..............................................16
Pause, Recording......................................................20
Picture Search ...........................................................13
PLAY Button....................................11-13,15,16,21,22
Playing a Tape.....................................................12-16
POWER Button .................................7,11,12,19,20,22
Power Indicator................................................7,12,23
PREV CH (Previous Channel) Button...................11
Problems, Solving ...............................................26,27
Product Registration...................................................i
Pro-Tect Plusª Feature...........................................20
REC Button.....................................................11,17-21
REC Indicator.................................................17,18,23
RECORD Button............................................17-21,22
Recording
From Another VCR...........................................21
One Program While
Watching Another...........................................17
Express ...............................................................18
Normal................................................................17
Pause...................................................................20
Speeds.................................................................17
Timer..............................................................19,20
REMOTE CONTROL Feature ................................21
Remote Control.........................................................11
Remote Sensor ..........................................................22
Remove or Add Channels from Memory...............8
REMOVE/ADD CHANNEL Menu............................8
Review Programs Feature.......................................20
REW Button ..........................................11,13,15,21,22
Safety Precautions.......................................................i
SEARCH Button ............................................11,13,15
Searching, Picture.....................................................13
Seleccione el Idioma...................................................9
SŽlectionner la langue................................................9
Antenna.............................................................2-3
Audio/Video Jacks.......................................2,3-6
Cable-TV ........................................................2,3-5
Two VCRs ............................................................6
Hookup, Choosing.....................................................2
Idioma..........................................................................9
INDEX Feature..........................................................15
INDEX SEARCH Menu...........................................15
IN FROM ANT. Connector................................3-6,23
28
Download from Www.Somanuals.com. All Manuals Search And Download.
References
Index
Sensor, Remote .........................................................22
Setting a Timer Recording ......................................19
Setting Up the VCR ..............................................7-10
PREFERENCES Menu..............................9,10,13,21
SLOW Button..................................................11,13,16
Slow Motion..............................................................13
SLP Speed..................................................................17
Solving Problems ................................................26,27
SP Speed ....................................................................17
Spanish.........................................................................9
SPEED Button...........................................11,17-19,21
Speeds, Recording....................................................17
Startup ....................................................................7-10
Stop Action Pause ....................................................16
STOP Button...............................11,12,15,17,18,19,21
STOP•EJECT Button ..........................12,17-19,21,22
Stopping Recording Program.................................17
Stopping Timer Programs.......................................19
Table of Contents .......................................................1
Time and Date, Setting ............................................10
Time Counter.......................................................14,15
TIME Menu................................................................10
TIMER Indicator..........................................7,18,19,23
Timer Recording
Checking and Clearing.....................................20
Front VCR Line Input.......................................20
Setting .................................................................19
Stopping .............................................................19
Tracking, Automatic and Manual..........................14
TRACKING Button....................................11-13,16,22
Trouble Checks....................................................26,27
SIGNAL TYPE Feature..............................................8
Turn On VCR..............................................................7
TV•VCR Button ..................................3-6,8,9,11,17,22
VCR Controls............................................................22
VCR Indicator...........................................7-9,12,17,23
VCR MAIN MENU..................................8-10,13,19-21
VCR, Cleaning ..........................................................24
VCR, Turn On.............................................................7
VCR1/VCR2 Feature................................................21
VCRs Memory, Placing Channels............................8
VCRs, Connecting for Tape Copying......................6
VIDEO1 IN Jacks...............................................6,21,23
VIDEO1 OUT Jacks.......................................3-6,21,23
Warranty, Limited....................................................25
Zero Search................................................................15
29
Download from Www.Somanuals.com. All Manuals Search And Download.
For your nearest Home
Entertainment Dealer
or Authorized Servicenter
call toll-free in the U.S.A.
1-800-336-1900
Canadian Consumers –
Your toll free numbers are:
English: 1-800-522-0338
French: 1-800-522-0445
If you would like a copy of this manual in French, please follow the
instructions below:
Si un livret d’instructions en français n’est pas inclus avec votre appareil, vous
pouvez en obtenir un (indiquer le numéro de modèle, votre nom, et votre
adresse) en vous adressant à:
Thomson Consumer Electronics
Attention: Canadian Operations
P.O. Box 0944
Indianapolis, IN 46206-0944
Please do not send any products to the Indianapolis
address listed in this manual or on the carton. This will
only add delays in service for your product.
10330 North Meridian Street
Indianapolis, IN 46290-1024
©
1996 Thomson Consumer Electronics, Inc.
®
Trademark(s) Registered
Marca(s) Registrada(s)
Printed in Japan
Part Number 96-VR337/VR508-1
Download from Www.Somanuals.com. All Manuals Search And Download.
|