®
Explorer HDTV Setup Wizard
User’s Guide
In This Guide
Introducing the Setup Wizard ................................ 2
Picture Formats ....................................................... 3
Setting Up Your HDTV With the Setup Wizard ..... 7
Easy Setup Instructions ......................................... 11
Advanced Setup Instructions ................................ 12
Changing the Settings While Watching TV........... 13
Closed Captioning.................................................. 16
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture Formats
PictureFormats
The type of screen your HDTV has (wide screen or standard screen)
What is the
determines how the set-top displays programs on the screen. The picture
format for an HDTV is a combination of aspect ratio and screen resolution
and is different for standard-screen and wide-screen HDTVs.
Difference Between
a Standard Screen
and a Wide Screen?
An aspect ratio is the ratio of the width to the height of the TV screen. The
aspect ratios differ because the television industry manufactures both
standard-screen and wide-screen HDTVs to appeal to consumer viewing
preferences.
What Is An Aspect
Ratio?
A standard-screen HDTV has a
4:3 aspect ratio. The screen is 4
units wide for every 3 units tall.
A wide-screen HDTV is one-third
wider than a standard-screen
HDTV. The screen is 16 units
wide for every 9 units tall.
———— 16 ————
——— 4 ———
3
9
Aspect Ratio: 4:3
Aspect Ratio: 16:9
Screen Resolution:
480p or 480i
Screen Resolution:
720p or 1080i
fills the screen
fills the screen
Download from Www.Somanuals.com. All Manuals Search And Download.
3
Picture Formats
The screen resolution indicates the amount of detail that the picture displays.
Resolution is identified by the number of display lines on the screen. The
techniques that an HDTV uses to “paint” the picture on the screen are referred
to as progressive and interlaced.
What is the Screen
Resolution?
For example, a resolution of 1080i indicates that the screen shows 1080
lines in an interlaced display, and 480p means that the screen shows 480
lines in a progressive display.
Note: The screen resolution (1080i, 480p, etc.) is sometimes referred to as
the scan rate. The terms are interchangeable.
With the progressive
method, every pixel on
the screen is refreshed
simultaneously.
The interlaced method
involves refreshing pixels
in alternation—first the
odd lines and then the
even lines.
Download from Www.Somanuals.com. All Manuals Search And Download.
4
Picture Formats
The type of screen your HDTV has determines how the set-top displays
How Do I
programs on the screen. The following examples show how programs will look
when the picture format is set to Normal mode (not Stretch or Zoom modes).
Know Which
Picture Format
To Choose?
Standard-Screen HDTVs
Automatically display in this manner:
Full screen format
On a standard HDTV, these picture
formats:
480p or 480i standard
720p or 1080i wide
Letterbox format
Download from Www.Somanuals.com. All Manuals Search And Download.
5
Picture Formats
Wide-Screen HDTVs
On a wide screen HDTV, these picture
formats:
Automatically display in this manner:
Pillarbox format
480p or 480i standard
720p or 1080i wide
Full screen format
Download from Www.Somanuals.com. All Manuals Search And Download.
6
Setting Up Your HDTV With the Setup Wizard
Setting Up Your HDTV With the Setup Wizard
Before you begin to set up your HDTV using the Setup Wizard, there are two
things you need to do:
•
•
Download the latest information to the set-top. (You only need to do this
for the initial setup. After the initial set up, programming information is
downloaded to the set-top automatically on a regular basis.)
Prepare the set-top to send picture formats that your HDTV supports.
Assuming that you have connected the Y, Pb, Pr ports on the back of the
set-top to one of the video ports on the HDTV, complete the following steps
to download latest software, programming, and service information to the
set-top. (Be sure you have made a note of which video input port the set-top
is connected to on the HDTV. For example: Video input port 6.)
Download the
Latest
Programming
Information to the
Set-Top
Note: You only need to do this for the initial setup.
1. Plug the set-top and the TV into an AC power source.
2. Do not turn on the set-top or TV yet.
3. Wait until you see one of the following displays on the front of the
set-top:
• Current time
• Four dashes (- - - -)
Important: It may take several minutes for the set-top to receive the latest
software, programming, and service information. When the front panel
displays the time or four dashes, the update is complete.
4. STOP! Before you turn on the TV or the set-top, you should have read the
information in the Picture Formats section, earlier in this guide.
Download from Www.Somanuals.com. All Manuals Search And Download.
7
Setting Up Your HDTV With the Setup Wizard
If your HDTV displays a black screen when you turn it on, the set-top may be
Prepare the
sending a picture format that your HDTV does not support. Prepare the
set-top to send all picture formats that your HDTV supports. Later, while
watching TV, you will be able to toggle among the different settings to select
the format that provides the best picture quality for the program you are
watching.
Set-Top to Send
Picture Formats
That Your HDTV
Supports
Complete these steps to prepare the set-top to deliver programming in the
picture format settings that your HDTV supports.
Important: Before you start, read these instructions carefully. When you get
to step 5 you have 20 seconds to begin selecting picture format settings.
After 20 seconds, the set-top is no longer in the Picture Format mode. If this
occurs, repeat this process, starting at step 2.
1. Refer to the user’s guide that came with your HDTV to find the picture
formats that your HDTV supports.
2. If the set-top is turned off, press the Power key to turn it on.
3. On the front of the set-top, press and hold the Select
button until the
Message Light blinks.
4. Then, press the Vol— key to indicate that you want to select a picture
format setting. The LED display shows HdSr to indicate that the set-top
is in the Picture Format mode for HDTV settings.
5. In the following table, find each of the picture formats that your HDTV
supports. Then, press the corresponding buttons on the front panel of
the set-top.
Note: If 1080i is one of the settings that your HDTV supports, we suggest
you select it last. Then, when you turn on the TV to use the Setup Wizard,
the picture format will be 1080i.
To select this
picture format:
Press this
button on the
Front Panel:
The set-top
briefly
displays:
And then
briefly
displays:
480i
CH+
480i
SEt
SEt
SEt
SEt
720p
480p
1080i
VOL–
CH–
720p
480p
1080
VOL+
Download from Www.Somanuals.com. All Manuals Search And Download.
8
Setting Up Your HDTV With the Setup Wizard
Yes. The Setup Wizard provides two options for selecting your screen type:
Is There More
Than One
•
If you choose the Easy option, the Setup Wizard automatically sets up the
HDTV to receive programming in 1080i and 480i format.
Setup Option?
•
If you choose the Advanced option, you can toggle through all the picture
formats and select the formats that look best on the HDTV screen.
Note: Use the
,
,
keys on the remote control to navigate through
the Setup Wizard menus and options. You may want to have available the
user’s guide that came with your HDTV for reference.
How Do I Start the
Setup Wizard?
Download from Www.Somanuals.com. All Manuals Search And Download.
9
Setting Up Your HDTV With the Setup Wizard
1. Press
to start the set up.
2. Choose one of the following options:
• To choose the Easy Setup option
press
; then, go to the Easy
Setup Instructions on page 11.
• To choose the Advanced Setup
option press
; then go to the
Advanced Setup Instructions,
on page 12.
Download from Www.Somanuals.com. All Manuals Search And Download.
10
Easy Setup Instructions
EasySetupInstructions
1. Press
or
to select the type of
TV screen you have.
2. Press Power to begin watching TV.
Notes:
•
•
If you pressed
, the setup is
complete. The TV is set to receive
programming in 1080i and 480i
format.
If you pressed
, the setup is
complete. The TV is set to
receive programming in 1080i
format.
Download from Www.Somanuals.com. All Manuals Search And Download.
11
Advanced Setup Instructions
Advanced Setup Instructions
1. Press
or
to choose the type
of TV screen you have.
2. Press
to see how various
formats look on your TV screen.
3. Press SELECT to toggle between
the Save and Remove options,
or press
to see how the next
format looks on your TV screen.
Important: If you see a black screen,
press
again to view the next
screen. Do not press SELECT. The
black screen means that your TV
does not support that particular format,
so you do not want to select it.
4. After saving the picture formats,
press EXIT. The setup is complete.
5. Press POWER to begin watching
TV.
Download from Www.Somanuals.com. All Manuals Search And Download.
12
Changing the Settings While Watching TV
Changing the Settings While Watching TV
Some channels are high definition (HD) and some are not. To maximize viewing
of non-HD channels, you can toggle between an HD scan rate (either 1080i or
720p) and a standard definition scan rate (either 480i or 480p).
How Do I Change
the Picture Size?
Press the # key on the remote control to toggle through the picture size options
(Normal, Stretch, and Zoom) while in fixed mode, or press the # key to toggle
through the picture format options (SD Normal and HD Zoom) while in pass-
through mode. (See the Changing the Settings While Watching TV section on
the next page for more information about the pass-through mode.) Notice as you
toggle from one format to another that the scan rate (1080i, 480i, etc.) appears
briefly in the bottom right corner of the screen.
Standard-Screen HDTV:
maximize viewing on
non-HD channels.
Wide-Screen HDTV:
maximize viewing of any
channel.
Note: HD channel
programs automatically
fill the entire HDTV
screen.
Download from Www.Somanuals.com. All Manuals Search And Download.
13
Changing the Settings While Watching TV
1. Press Settings to access the Quick
How Can I Change
the Picture Settings
If There Is Not a #
Key On the Remote
Control?
Settings menu.
2. Scroll to Picture Format or Picture
Size. (You will only see the Picture Size
if the Set Picture Format is set to
Pass-Through in the General Settings
menu.)
3. Press or to view the options.
4. As you scroll through the options, notice how the picture on the screen
changes.
5. Select the picture size and/or format of your choice.
Press Settings twice to display the General
Settings menu. Then, choose
one of the following options.
How Can I Change
How the Picture
Looks On My TV?
Fixed—The screen resolution you
selected from the Setup Wizard can be
seen in the Quick Settings menu. The
screen resolution remains the same
(fixed) until you change it.
Pass-Through—This option provides a built-in convenience factor. Theset-top
attempts to convert the signal of an incoming program to the best picture format
for your HDTV screen. However, if you have not selected all the screen resolu-
tions that are available, the screen resolution defaults to the best selection
available based the selections you made in the HDTV Setup Wizard.
Upconvert 1 and Upconvert 2—The operation of these two options is similar
to that of the Pass-Through option. See the Display Formats For
Digital
Sources table on the next page.
Auto DVI—If your HDTV is connected through the DVI port, you will see this
option and not the Pass-Through option. Incoming programming is
automatically formatted to the scan rate supported by your HDTV.
Download from Www.Somanuals.com. All Manuals Search And Download.
14
Changing the Settings While Watching TV
The following table illustrates the relationship between the format option you
chose, the signal the set-top receives, and how the picture is displayed on the
TV screen.
Display Formats
For Digital Sources
If you chose this
picture format
option:
When the set-top
receives this type
of signal:
The picture is
displayed on the
HDTV screen in
this format:
1080i, 720p,
480i, 480p
(Depending on your
selections made in the
Setup Wizard and
Fixed
All formats
Quick Settings menu)
480i
480i
480p
720p
1080i
480p
720p
1080i
Pass-Through
480i / 480p
480p
1080i
Upconvert 1
Upconvert 2
720p / 1080i
480i / 480p
480p
720p
720p / 1080i
Download from Www.Somanuals.com. All Manuals Search And Download.
15
Closed Captioning
Closed Captioning
Closed captioning is text on the TV screen related to the programming being
viewed. What you see is an abbreviated version of the actors’ dialogue and
indications of important background sounds. For sporting events, closed
captioning provides realtime play-by-play descriptions from the announcers.
Closed captioning is provided for those requiring assistance understanding and
enjoying sound.
What Is Closed
Captioning?
Many TVs support closed captioning through the RF and baseband inputs.
When your HDTV-to-set-top connection is through the YPrPb port or the DVI
port, closed captioning is decoded and displayed by the Explorer set-top.
Does My TV
Support Closed
Captioning?
Several companies (sources) provide closed-captioning service to
television networks and production companies for standard (analog) and
digital programming.
Who Provides
Closed Captioning?
Closed-Captioning Sources for Standard (Analog) Programming
•
•
Std CC1 is the primary caption service for non-digital programming.
Std CC2 through Std CC4 are text services that may contain different
information, including alternate languages.
•
T1 through T4 are text services that may also provide additional
information from the closed-caption provider.
Closed-Captioning Sources for Digital Programming
•
•
•
Digital 1 is the primary caption source.
Digital 2 is the suggested choice for alternate languages.
Digital 3 through Digital 6 are undefined at this time.
Download from Www.Somanuals.com. All Manuals Search And Download.
16
Closed Captioning
1. Press Settings twice to access the General Settings menu.
Choose a Closed
Captioning Source
2. Scroll to CC:Source.
3. Press to access the STD (analog) and digital source options.
4. Scroll through the options and select the recommended sources:
Std CC1 and Digital 1.
1. Press Settings twice to access the General Settings menu.
Control the Audio
Volume While
2. Scroll to Audio:Volume Ctrl. There are two setting options:
Closed Captioning
Is Turned On Or Off
• Fixed – The Fixed setting controls the audio volume through the TV and
enables you to have closed captioning turned on or off while listening to
the programming audio.
• Variable – The Variable setting controls the audio volume through the
set-top and enables you to have closed captioning turned on or off
while listening to the programming audio, or you can have closed
captioning on while the set-top audio is muted.
3. Select either the Fixed or Variable setting.
You can turn closed captioning on and off at any time through the Quick Settings
menu.
Turn Closed
Captioning
On and Off
1. Press Settings to access the Quick Settings menu while watching TV.
2. Turn caption on or off.
3. If you chose the Fixed setting for the audio volume:
A. Scroll to Caption Off/On.
B. Press to access the options.
C. Scroll through the options and press Select to set your choice.
4
If you chose the Variable setting for the audio volume:
A. Scroll to Caption Off/On/On with Mute.
B. Press to access the options.
C. Scroll through the options and press Select to set your choice.
Download from Www.Somanuals.com. All Manuals Search And Download.
17
Closed Captioning
Depending on the program or caption provider, you may or may not be able to
change how the closed captioning looks on the TV screen.
Change the
Look of Closed
Captioning
1. Press Settings twice to access the General Settings menu.
2. Scroll to CC:Options.
3. Press to access the CAPTION STYLE column.
•
If you selected the Set by Program option, the style is set by the caption
provider for each program, and you cannot change the settings.
•
If you select the Set by Viewer option, you can use the instructions in the
remainder of this section of the guide to change the caption styles.
Note: You may be able to change the appearance of closed captioning
on most HD channels and on some digital channels using the proce-
dures in this section. Closed captioning on analog channels and on most
digital channels appears on the screen with white letters on a black
background, and the format cannot be changed.
The following instructions make the following assumptions:
Change the
Background
Shading and
Color
•
You have accessed the General Settings menu by pressing Settings
twice.
•
The caption style setting in the General Settings menu is Set by Viewer.
Change the Background Shading
1. Scroll to CC:Background.
2. Press to access the Shading column.
3. Press and to scroll through the options. There are five
background shading options:
• Clear — allows video to be seen behind the captions
• Slight — shows both the background and the video behind it
• Solid — hides the video behind the captions
• Flashing — a solid background turning on and off at a rate
determined by the caption provider
• Default — the background is determined by the caption provider
4. Select your choice.
Change the Background Color
1. Scroll to CC:Background.
2. Press to access the Color column.
3. Press and to scroll through the several color options.
4. Select your choice.
Download from Www.Somanuals.com. All Manuals Search And Download.
18
Closed Captioning
The shading and color options for the text (characters) is the same as for the
background shading and color.
Change the Shading
and Color of the
Characters
Change the Character Shading
1. Scroll to CC:Characters.
2. Press to access the Shading column.
3. Press and
to scroll through the options.
4. Select your choice.
Change the Character Color
1. Scroll to CC:Characters.
2. Press to access the Color column.
3. Press and
to scroll through the options.
4. Select your choice.
There are eight font styles to choose from, and they are numbered Style 1
through Style 8. The styles may not look the same on all TVs. Select the
different fonts to see how they look on your TV.
Change Style of
the Characters
Change the Text Style
1. Scroll to CC:Characters.
2. Press to access the Style column.
3. Press and
to scroll through the options.
4. Select your choice.
Change the Character Size
Change the Size
of the Characters
1. Scroll to CC:Options.
2. Press
to access the Text Size column.
3. Press and to scroll through the options (Small Text, Medium Text,
Large Text, Default).
4. Select your choice.
If the program contains closed caption information, it will be recorded by your
VCR. When the tape is played back, turn on the closed captioning feature on
your TV to view the captions.
Record HD Programs
Note:An HD program records to your VCR in SD (standard definition) format.
Download from Www.Somanuals.com. All Manuals Search And Download.
19
© 2004 Scientific-Atlanta, Inc. All rights reserved.
Explorer, Scientific-Atlanta, andtheScientific-AtlantalogoareregisteredtrademarksofScientific-Atlanta, Inc.
All other trademarks shown are property of their respective owners.
Productandserviceavailabilitysubjecttochangewithoutnotice.
Scientific-Atlanta, Inc., 5030SugarloafParkway, Box465447, Lawrenceville, GA30042
January 2004 Printed in USA.
Part Number 4003114 Rev B
Download from Www.Somanuals.com. All Manuals Search And Download.
|