Z6JE/US2F
Owner’s Manual
4
Table of Contents
Manual del usuario
18
32
Tabla de contenido
H DT V LC D
Manuel d’instructions
TVHD de LCD
T VHD ACL
Table des matières
DP26640
Model No. / No. de Modelo / Nº de modèle
1JC6P1P0404 - -
Part No. / No. de parte / Nº de piece:
© 2011 Sanyo Manufacturing Corporation
Download from Www.Somanuals.com. All Manuals Search And Download.
PC RESOLUTION CHART
FCC INFORMATION __________
This equipment has been tested and found to comply
with the limits for a Class B digital device, pursuant to
Part 15 of the FCC Rules. These limits are designed to
provide reasonable protection against harmful interfer-
ence in a residential installation. This equipment gen-
erates, uses and can radiate radio frequency energy
and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio
communications. However, there is no guarantee that
interference will not occur in a particular installation. If
this equipment does cause harmful interference to
radio or television reception, which can be determined
by turning the equipment off and on, the user is encour-
aged to try to correct the interference by one or more
of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and
receiver.
– Connect the equipment into an outlet on a circuit dif-
ferent from that to which the receiver is connected.
– Consult the dealer or an experienced radio/TV tech-
nician for help.
CAUTION: FCC Regulations state that improper modifi-
cations or unauthorized changes to this unit may void
the user’s authority to operate the unit.
TRADEMARKS _______________
Manufactured under license from Dolby Laboratories.
“Dolby” is a trademark of Dolby Laboratories.
SPECIFICATIONS
Power Requirement: Source: AC 120V, 60Hz
AC Power Consumption: 95 watts
HDMI, the HDMI Logo and High-
Definition Multimedia Interface are
trademarks or registered trademarks
of HDMI Licensing LLC in the United
States and other countries.
Weight: 14.6 lbs (w/stand)
Dimensions:
MODEL
WIDTH
HEIGHT
19.0
DEPTH
6.5
As an Energy Star® Partner, Sanyo
DP26640
w/o stand
26.1
Manufacturing
Corporation
has
17.3
3.2
determined that this product meets
the Energy Star® guidelines for energy
efficiency.
NOTE: Dimensions are in inches
ENERGY STAR
This Class B digital apparatus complies with Canadian
ICES-003.
Manufactured under license from
Audyssey Laboratories. U.S. and
foreign patents pending. Audyssey
Dynamic VolumeTM is a trademark of
Audyssey Laboratories.
Need help?
1-800-877-5032
3
Download from Www.Somanuals.com. All Manuals Search And Download.
Please read before
operating your HDTV!
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS . . . . . . . . . . . . 2
FCC INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
TRADEMARKS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
PC RESOLUTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
DISPOSAL PRECAUTIONS . . . . . . . . . . . . . . . . . . . . . . .3
SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3
CONTENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4
PROTECTING THE LCD SCREEN . . . . . . . . . . . . . . . . .4
HANDLING PRECAUTIONS . . . . . . . . . . . . . . . . . . . . .4
STAND ASSSEMBLY . . . . . . . . . . . . . . . . . . . . . . . . . . .5
WALL MOUNTING (OPTIONAL) . . . . . . . . . . . . . . . . . .5
GETTING STARTED—
PROTECTING THE LCD SCREEN
CAUTION: The screen can be damaged if it is not
maintained properly.
Do not use hard objects such as hard cloth or paper to
clean the screen.
•
•
Do not use excessive pressure when cleaning the
screen; excessive pressure can cause permanent
discoloration or dark spots.
Remote Control Battery Installation . . . . . . . . . . . .5
Antenna Connections for off-air or cable . . . . . . . .5
BACK PANEL JACKS . . . . . . . . . . . . . . . . . . . . . . . . . . .6
A/V CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . .7
REMOTE CONTROL OPERATION . . . . . . . . . . . . . . . . .8
POWER CONNECTION / INITIAL CHANNEL SEARCH 9
ON-SCREEN MENU OPERATION—
NEVER spray liquids on the screen.
•
HANDLING PRECAUTIONS
Handle by the cabinet only.
•
•
•
•
Handling by two or more people is recommended.
Never touch the screen when handling.
Handling damage is not covered under warranty.
Channel Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . . .9
Channel Search . . . . . . . . . . . . . . . . . . . . . . . . . .9
Channel Scan Memory . . . . . . . . . . . . . . . . . . . .9
Input Setting . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Video2 Setting . . . . . . . . . . . . . . . . . . . . . . . . . .10
Setup . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Menu Language . . . . . . . . . . . . . . . . . . . . . . . . .10
Digital Caption . . . . . . . . . . . . . . . . . . . . . . . . . .10
Energy Saver . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Clock Timer . . . . . . . . . . . . . . . . . . . . . . . . . . . . .10
Light Sensor . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Auto Shut-off . . . . . . . . . . . . . . . . . . . . . . . . . . .11
V-Chip . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .11
Picture . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .12
Manual Picture Settings . . . . . . . . . . . . . . . . . .12
Pix-Shape Settings . . . . . . . . . . . . . . . . . . . . . . .12
Sound . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
aaManual Sound Settings . . . . . . . . . . . . . . . . . . .13
PHOTO VIEWER . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .13
PC CONNECTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . .14
PC MENU OPERATION . . . . . . . . . . . . . . . . . . . . . . . .14
WARRANTY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .15
Do not remove the protective film covering the front
cabinet while handling the HDTV.
•
POSITIONING THE HDTV
Always use a firm and flat surface when positioning
your HDTV.
•
Do not position the unit in a confined area.
Allow adequate space for proper ventilation.
•
•
•
Do not position the HDTV where it is easily reachable
by small children and may present risk of injury.
Once HDTV is positioned, remove the protective film
covering the front cabinet.
•
“The American Academy of Pediatrics discourages
television viewing for children younger than two years
of age”
CONTAINS MERCURY LAMPS,
DISPOSE OF PROPERLY
SANYO television customers should contact
MRM Recycling at 888-769-0149 or visit their
SANYO’s waste management plan.
Need help?
1-800-877-5032
4
Download from Www.Somanuals.com. All Manuals Search And Download.
STAND ASSEMBLY ___________
NOTE: Skip these steps if you are wall mounting the TV.
Place HDTV face down on a padded or cushioned
GETTING STARTED
BATTERY INSTALLATION
Install two (2) “AA” batteries in the remote control.
(Not included)
1
2
flat surface to protect the screen and finish.
Carefully insert the stand base to the bottom of the
HDTV and secure the base by inserting two (2)
screws as indicated in the diagram below.
To ensure safe operation, please observe
the following precautions:
NOTE: Screws can be found taped to the bottom of the
stand base.
• Replace both batteries at the same time. Do not use
a new battery with a used battery.
• There’s a risk of explosion if a battery is replaced by
an incorrect type.
• Do not expose the Remote Control unit to moisture
or heat.
• Be sure to match the “+” and “–” signs on the
batteries with marks inside the remote control.
• Please properly dispose of used up batteries.
Position the HDTV on a firm and flat surface with
3
adequate space for proper ventilation.
ANTENNA CONNECTION FOR
OFF-AIR SIGNALS OR CABLE
WALL MOUNTING (OPTIONAL)
Hook up your antenna or your cable service to the
HDTV’s ANT terminal with the use of a 75 OHM
coaxial cable.
Wall mounting of the HDTV must be performed
by a skilled person.
NOTE: Keep your indoor antenna at least 3 ft. away
from the television set and any other electronic
equipment.
If stand base disassembly is required:
Place HDTV face down on a padded or cushioned
1
2
flat surface to protect the screen and finish.
Remove the two (2) screws securing the foot stand.
CAUTION: Hold the stand firmly as you remove the
last screw.
ANTENNA
Use the screws you would use to attach the stand base
to secure the HDTV to a wall mounting kit.
ANALOG / DIGITAL
ANTENNA IN
NOTE: Wall mounting kit is not included.
VESA standard interface: 100 x 100
Mounting screws measurements:
M4 (4mm) Diameter, Length—10mm (maximum)
CABLE
The tuner in this HDTV can receive:
• Digital and Analog off air signals from an antenna
• Analog or ClearQAM cable channels from a direct
Cable TV connection.
Need help?
1-800-877-5032
5
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
HDTV SIDE PANEL
HDTV INPUT/OUTPUT REFERENCE
HDMI
2
HDMI (INPUT1 or INPUT2)
An all digital AV interface that can accept uncompressed
video signals for the very best picture possible.
1
1
HDMI
1
NOTE: A DVI conection is possible via the HDMI (DVI) INPUT1
using an appropriate adapter and connecting the audio
to the Stereo Mini AUDIO jack.
2
5
2
USB Input
View pictures stored in a USB flash drive.
3
4
3
4
5
PC Input
Monitor RGB (D-SUB)
AUDIO mini stereo jack (3.5mm)
For AUDIO signal from PC or DVI device.
Digital Audio Output (Coaxial)
Analog / Digital Antenna Input
6
8
6
7
Component AV Input (VIDEO2 or VIDEO3)
Green (Y), blue (Pb), and red (Pr) Video inputs plus the
white and red Audio inputs.
NOTE: A composite connection is possible via VIDEO INPUT2
using the Y (VIDEO) jack and the L/R audio jacks. (See
Video 2 Setting on page 10.)
7
Composite AV Input (VIDEO1)
Yellow (Video), plus white and red (Audio) input jacks.
8
HDTV BACK PANEL
Optimum
High Definition
High Definition
Standard Definition
Composite
H D M I
(or DVI to HDMI
cable/adapter)
Component
NOTE: Composite, Component, and DVI video connections need their appropriate audio connections.
High Definition image available from HD signals and HD equipment.
Need help?
1-800-877-5032
6
Download from Www.Somanuals.com. All Manuals Search And Download.
GETTING STARTED
AUDIO / VIDEO CONNECTIONS
Use HDMI INPUT1 & 2 to hookup HD digital
devices such as a Blu-ray player, HD Cable Box,
HD Satellite Receiver or Video-game System.
HDMI (DVI) INPUT1 can be used to hookup a DVI
device with the use of an appropriate DVI to
HDMI cable or adapter. Stereo Mini AUDIO jack
needs to be hooked up to the DVI device as well
Connect your digital device’s HDMI output to any
of the two (2) HDMI inputs on your HDTV with the
use of an HDMI cable.
NOTE: HDMI INPUT1 may also be used to hookup
any digital device with an HDMI output, with-
out the use of the Stereo Mini AUDIO jack.
SATELLITE RECEIVER
(or similar device)
HDMI
HDMI
2
HDMI
1
USB input jack is used to con-
DVD PLAYER
(or similar device)
nect
a
USB mass storage
DVI
device to watch digital images
stored in JPEG format.
USB FLASH
DRIVE
Digital Audio Output is used to hookup a multi-
channel receiver with the use of a phono-type
digital audio cable.
NOTE: Audio/Video cables
are not supplied
DVD PLAYER
(or similar device)
STEREO AMPLIFIER OR
MULTICHANNEL RECEIVER
VCR
(or analog device)
COMPOSITE connections are used to hookup your
analog equipment such as a VCR or an older DVD
player.
COMPONENT connections will accept SDTV,
EDTV and HDTV video signals. Use them for
great image quality from digital devices such as
a DVD player or Video Game system.
NOTE: Match the color of your device’s output jack,
the connector and the HDTV’s input jack.
Match your digital device’s Component
output jacks to either of the two (2) Component
input jack sets (VIDEO2 or VIDEO3) on your HDTV.
Need help?
1-800-877-5032
7
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL OPERATION
Turns your HDTV On or Off.
Selects the video source to view. Holding
down the key displays the Input List.
Selects the desired Audio mode.
Stereo, Mono, or SAP (when available.)
Displays the Channel Information banner.
Pressing it twice restores your HDTV to its
factory settings. All user customized set-
tings will be cleared.
Displays the “Off” Timer. While Off Timer
is on-screen, press the “0” key to Set the
amount of time (in 30 minute increments)
at which the HDTV will turn off.
Cycles through the available aspect
ratios. The different settings either
stretch, zoom, or fill the image on your
screen. Bars may appear on top and bot-
tom of your screen (or on left and right
sides) depending on the broadcasted sig-
nal or program. (See page 12)
Cycles through the available Caption
modes (when available.)
Select channels directly.
For channels 100 and up, press and hold
the first number, then enter the remaining
two numbers.
Scan through the channels in the memory
database.
Increases or decreases the audio level.
Switch between current channel and last
selected channel or input.
Mute or restore the sound.
Set or select the highlighted option on
the screen.
Allows for the direct selection of digital
subchannels. For example: to select
channel 39.1 press the 3 and 9 keys,
followed by the dash –, and 1 keys.
Exits the on-screen menu.
Displays or hides the on-screen menu.
Move the on-screen cursor in the desired
direction.
Need help?
1-800-877-5032
8
Download from Www.Somanuals.com. All Manuals Search And Download.
ON-SCREEN MENU OPERATION
GETTING STARTED (CONTINUED)
INITIAL CHANNEL SEARCH
CHANNEL SETTING
Display the On Screen menu and use the CURSOR LM
Before proceeding, please make sure to correctly
hook up your antenna or cable connection and all
AV equipment to your HDTV.
keys to select Channel Setting. Press ENTER.
Channel Search
Auto – Searches the detected mode, Cable or Air.
1. PLUG IN AC POWER CORD
120V AC, 60Hz
Cable
–
Searches for analog and unscrambled
(ClearQAM) digital cable channels.
2. TURN ON TV (PRESS POWER BUTTON)
Wait for on-screen instructions to set an Initial Energy
Saving Mode, and perform an Initial Channel/Signal
Search.
Air (Antenna) – Searches for analog and digital off-air
channels.
Digital Add-On – Searches digital channels adding newly
3. TV SET LOCATION SELECTION:
found digital channels to the channel database.
Select “Home Mode” by pressing the CHM key to set
the HDTV’s backlight to an Energy Star qualified
level, or select “Store Mode” by pressing CHL to set
the backlight to a retail display level.
4. CHANNEL AND AV SIGNAL SEARCH:
Press the CHLM key to perform a channel search
from an Antenna or a direct Cable connection,
followed by a signal search from devices hooked up
to the HDTV’s AV input jacks.
5. CHANNEL AND SIGNAL SETUP SCREEN
IMPORTANT FACT: This HDTV maintains only one database of
digital channels. Therefore, when you search for cable channels,
the database of antenna digital channels will be deleted. You will
only be able to receive those ClearQAM channels your cable
company provides.
The final setup screen displays analog and digital
channels found as well as AV inputs detected.
Pressing the CHLM key finalizes the setup process.
NOTE: To repeat the initial setup process press
the MENU key.
Channel Scan Memory
Channel Scan Memory lists all Analog and Digital chan-
nels found. It also lists Analog channels that were not
found, which can be added.
Channel and Signal Setup:
Analog Channels...16
Video 1...Yes
Digital Channels...24
HDMI 1...Yes
Video 2...no
HDMI 2...no
Video 3...no
Use the CURSOR LM keys to move the channel select
bar through all enabled and disabled channels.
The search was successfully completed!
Press CHannel UP or DOWN to finish the Setup process.
NOTE: You may use the CH LM keys to change page.
Press MENU to repeat the process.
If you are having problems, call us toll-free at 1-800-877-5032
Press ENTER to enable or disable the selected channel.
Channel Scan Memory
TV
Analog
Digital
Digital
Analog
Analog
Analog
Digital
CH
03
WREG-DT
03-1
AV INPUT SELECTION
Press the INPUT key to select the correct AV input for the
03-2
WCVB
WEXT
04
05
NICK
06
NICK
video source you wish to watch.
06-1
VBCT
NOTE: Unused AV inputs may be disabled with the Input
Setting feature (see page 10).
Move
Page
ENTER Select
MENU Return
EXIT Exit
NOTE: For information on local digital channels, visit
Need help?
1-800-877-5032
9
Download from Www.Somanuals.com. All Manuals Search And Download.
ON-SCREEN MENU OPERATION
CHANNEL SETTING (CONTINUED)
Digital Caption
Captioning is textual information transmitted along with
the picture and sound. Turning Captioning ON (by
pressing the CAPTION key during normal TV viewing)
causes the HDTV to open these captions (digital or
analog) and superimpose them on the screen.
Input Setting
Input Setting feature allows the removal of unused
inputs from the AV input loop.
Use the CURSOR LM keys to select an AV input. Press
ENTER to disable (uncheck) or enable (check) the high-
lighted input.
NOTE: Local broadcasters decide which caption signals
to transmit.
Use the CURSOR LM and ꢀ ꢁ keys to modify Font,
Background, and Foreground of digital caption text.
NOTE: At least one input must and will remain checked.
:Skip is for reference only.
Video2 Setting
Energy Saver
Use this feature to establish either a Component or
Composite connection to the VIDEO INPUT 2 jacks on
your HDTV.
Energy Saver settings control the LCD backlight
brightness to reduce power consumption.
• Level 1: Energy Saver feature is off.
• Level 2: Low power consumption.
• Level 3: Lowest power consumption.
Use the CURSOR LM keys to select the type of connec-
tion you’ll use in VIDEO INPUT 2.
Press ENTER on the desired level.
NOTE: ECO key may also be used as a shortcut to
modify the Energy Saver settings.
Clock Timer
This feature allows you to set a Current Time for your
HDTV and enable a Switch On Time for the HDTV to
turn on at a specific time of day.
Press ENTER, a blue mark will appear next to the
selected option indicating it as the active option.
When On Timer Function is set to ON, the TV will
automatically turn on at the previously set Switch on
Time.
SETUP
Display the On Screen menu and use the CURSOR LM
keys to select Setup. Press ENTER.
Menu Language
Choose between English, Spanish and French for your
On Screen menu’s display language.
Press ENTER on the desired language.
Need help?
1-800-877-5032
10
Download from Www.Somanuals.com. All Manuals Search And Download.
NOTE: Blocking a rating will automatically block all
higher ratings. Unblocking a rating will auto-
matically unblock all lower ratings.
Light Sensor
This feature detects ambient room light brightness and
uses that reading to control the panel brightness level
and picture parameters to reduce the HDTV’s power
consumption.
For V-Chip (Movie) ratings select Movie and press
ENTER, and then select the desired MPAA rating limit.
Press the EXIT key to close the V-Chip menu.
NOTE: When room lighting is dark, the panel bright-
ness and/or the picture setting parameters such
as brightness and contrast are lowered. When
room lighting is bright, parameters are affected
opposite.
For V-Chip (TV) ratings select TV and press ENTER. Use
the CURSOR L M keys to select a rating and press
ENTER. Use the CURSOR L M keys to set the rating’s
status as Blocked or Viewable. Once ratings are set,
press the EXIT key to close the V-Chip menu.
Use the CURSOR LM keys to select On or OFF and
press ENTER.
Auto Shut-off
When Auto Shut-off feature is set to ON, it will allow
the HDTV to automatically turn off when no video
and/or audio signals are being received.
NOTES: By factory default, this feature is set to ON.
TV will automatically turn off if no AV signals
are received in a time span of 15 minutes.
NOTE: Some TV ratings offer more detailed settings
such as Dialogue, Language, Sexual, and
Violence.
Use the CURSOR LM keys to select On or OFF and
press ENTER.
ADVANCED V-CHIP SYSTEM (RRT5)
RRT5 (V-Chip Regional Ratings 5) is an advanced V-Chip
ratings system for over the air digital channels. When the
HDTV detects compatible RRT5 data, it’s downloaded &
stored in memory, and the Setup V-Chip screen is then
modified to show the Adjust (Advanced) option.
V-Chip (parental control)
Use this feature to automatically block programs with
content you deem as inappropriate for viewing by your
children.
Use the CURSOR L M and ꢀ ꢁ keys to highlight the
different options, and use the ENTER key to block or
unblock the selected rating.
NOTE: When vertical scroll bars appear, press CURSOR
NOTE: This feature is designed to comply with the
United States of America’s FCC V-Chip regula-
tions. Therefore, it may not function with broad-
casts that originate in other countries.
LM to gain access to the additional ratings.
MORE INFORMATION
Additional information about MPAA (Motion Picture
Association of America) and V-Chip rating can be
respectively.
ADJUSTING THE V-CHIP RATINGS
Select ON and press ENTER. Select Adjust (Standard)
and press ENTER.
Need help?
1-800-877-5032
11
Download from Www.Somanuals.com. All Manuals Search And Download.
ON-SCREEN MENU OPERATION
UNDERSTANDING PIX-SHAPE
NOTE: Images on left are for a 4:3 transmission while
images on right are for a 16:9 transmission.
PICTURE
Display the On Screen menu and use the CURSOR LM
keys to select Picture. Press ENTER.
Pix1 Shows a standard definition 4:3 image in its
original format, a 16:9 wide image is slightly
compressed horizontally.
You may choose between Vivid, Mild, and Standard,
which have predetermined fixed picture parameter
values, or choose the Manual option for customized
personal settings.
0
0
-1
0
NOTE: Each AV input can have its own picture mode
(pre-determined or manual.) Current input’s
selected option is indicated by a blue marker.
Pix2 Fills the entire image on the screen. A 4:3 image
is slightly stretched horizontally.
MANUAL PICTURE SETTINGS
Manual parameters to adjust include:
0
1
Color
Tint
Contrast
•
•
•
•
•
•
0
0
Brightness
Sharpness
Dynamic Contrast
The Detailed Setting option allows for the adjustment
of 7 additional parameters such as:
Pix3 Image is stretched vertically in comparison with
Pix2.
Signal Balancer
White Balance
H-Size
Noise Reduction
Edge Enhancer
V-Size
•
•
•
•
•
•
0
1
1
1
NOTE: Default Picture option returns all picture parame-
ters to their original factory settings.
Pix4 Image is stretched horizontally in comparison
with Pix3.
1
1
2
1
Pix5 Similar to Pix2, image is enlarged horizontally
but in a linear proportion in which center portion
of screen is stretched less than the sides.
ADJUSTING A PICTURE SETTING
Use the CURSOR LM keys to highlight the picture param-
eter you wish to adjust. Press the ENTER key to enter the
value adjustment screen. Modify the selected parameter’s
value by pressing the CURSOR ꢀ ꢁ keys.
Pix6 Similar to Pix1 with no Overscan*.
Pix7 Similar to Pix2 with no Overscan*.
* Overscan permits the image to slightly exceed bot-
tom and top edge limitations.
NOTE: CURSOR LM keys select the next/previous
parameter without returning to the previous
menu screen.
NOTE: Pix6 and Pix7 are not optimal for Standard
Definition content (a thin white line may appear
near edge of screen). Pix6 and Pix7 use is recom-
mended only for PC signal through HDMI.
Pix-Auto (AFD) Active Format Description.
Data carried in the video stream includes coded picture
frame information of the actual image, allowing the TV
to adjust the Pix-Shape automatically.
Once adjustments are complete, press the EXIT key to
return to normal TV viewing.
NOTE: AFD Pix-Shape mode is available only for Digital-
RF input.
Need help?
1-800-877-5032
12
Download from Www.Somanuals.com. All Manuals Search And Download.
ON-SCREEN MENU OPERATION USB INPUT
SOUND
PHOTO VIEWER
View pictures on your HDTV with the use of a USB mass
storage device (not included.)
Display the On Screen menu and use the CURSOR LM
keys to select Sound. Press ENTER.
Choose an option for your sound settings:
USB FLASH
DRIVE
Auto – Sound settings are linked to the current Picture
option and parameters are adjusted accordingly.
Dynamic, Mild, Standard
–
Predetermined sound
parameters not linked with any Picture option.
NOTE: The HDTV switches to
USB Input when a USB
flash drive is detected.
MANUAL SOUND SETTINGS
The Manual option provides different parameters that
can be personally adjusted:
Bass & Treble
Audyssey Dynamic Volume
Detailed Setting
Bass Extension
•
•
•
•
1
NOTE: A thumbnail
hide icon will appear
if a picture cannot be
decoded or if no
thumbnail data is
available.
– 4-Band Equalizer: Personalize audio highs and lows.
NOTE: Default Sound option returns all sound parame-
ters to their original factory settings.
USING THE PHOTO VIEWER
Press ENTER on a thumbnail photo to enable the Rotate,
Full View and Start Slideshow functions.
Once in Full View mode:
Use the CURSOR ꢀ ꢁ keys to change picture.
ADJUSTING A SOUND SETTING
Press ENTER to show the full view options menu.
Use the CURSOR LM keys to highlight the sound para-
meter you wish to adjust. Press the ENTER key to enter the
value adjustment screen. Modify the selected parameter’s
value by pressing the CURSOR ꢀ ꢁ keys.
Rotate
Pan
Zoom In
Slideshow Setup
Zoom Out
Browse Photo
•
•
•
•
•
•
SLIDE SHOW
NOTE: CURSOR LM keys select the next/previous
parameter without returning to the previous
menu screen.
In the Slideshow Setup menu you may turn the Shuffle
and Quick Change options ON or OFF.
Press ENTER on Start Slideshow either from the
Thumbnail View Screen or from the full view options
menu to start the slideshow from the current picture.
Once adjustments are complete, press the EXIT key to
return to normal TV viewing.
JPEG VIEWER USB MENU
Press MENU when in Full View or Slideshow mode to
display the USB On screen menu.
Picture Setting – Adjust Color, Tint, Contrast, Brightness,
Sharpness and Dynamic Contrast.
1
Audyssey Dynamic Volume solves the problem of large varia-
tions in volume level between television programs, commercials,
and between the soft and loud passages of movies. Audyssey
Dynamic EQ is integrated into Dynamic Volume so that as the play-
back volume is adjusted automatically, the perceived bass
response, tonal balance, surround impression and dialog clarity
remain the same.
NOTE: Picture Settings are separate configurations from
the settings in TV and AV inputs.
Need help?
1-800-877-5032
13
Download from Www.Somanuals.com. All Manuals Search And Download.
PC INPUT
Use your HDTV as a computer monitor by hooking up
your PC or Laptop to the TV with the use of an appropri-
ate monitor cable (not included.)
PC Setting
Auto Adjustment – Automatically adjusts display posi-
tion, dot clock and phase.
Before connecting any cables, disconnect the AC
power cords of both the HDTV and PC from the
AC outlets.
Dot Clock – Adjust the Dot frequency to match your
computer’s Dot frequency.
Phase – Adjust this parameter when the picture appears
Power on the HDTV and any other peripheral
equipment before powering on the computer.
to flicker or is blurred.
H-Position – Move the image horizontally
To avoid an “Out of Range” condition please set your
PC’s output resolution to one compatible with your
HDTV. See PC Resolution chart on page 3.
V-Position – Move the image vertically
Power Saving – Enable the HDTV to turn to Standby
Mode when computer is not in use.
NOTE: If computer has only DVI Output, a DVI to RGB
adapter will be required,or, a DVI to HDMI cable and
RCA audio cables (see HDMI (DVI) INPUT1 on page 7.)
RGB OUTPUT
JACK
DVI OUTPUT
JACK
HDTV SIDE PANEL
RGB Monitor
cable
PC Picture and Sound
Standard – Sets predetermined values to the Picture or
Sound parameters.
Manual – Adjust Contrast, Brightness, and Color
Temperature screen settings, and the Bass
and Treble audio settings.
PC OR LAPTOP
Stereo mini
audio cable
NOTE: Sanyo recommends using a monitor cable that
includes a Ferrite Core.
Laptop Display
When using your Sanyo HDTV to display a Laptop’s
screen display, holding down the Fn (or FN) key while
pressing the appropriate function key (F5, F7, F8, etc)
should cycle through different display modes between
the laptop and the HDTV.
NOTE: These settings do not affect normal TV viewing.
Modes may include displaying only on the laptop
screen, on both the laptop and the HDTV, or
displaying only on the HDTV.
Hold down
and press
NOTE: Fn key and function key symbols on the laptop’s
keyboard may vary from one brand to another.
Need help?
1-800-877-5032
14
Download from Www.Somanuals.com. All Manuals Search And Download.
ONE-YEAR LIMITED PARTS AND LABOR WARRANTY
THIS LIMITED PARTS AND LABOR WARRANTY IS VALID ONLY ON SANYO TELEVISIONS PURCHASED AND USED IN
THE UNITED STATES OF AMERICA, CANADA, AND PUERTO RICO, EXCLUDING ALL OTHER U.S. TERRITORIES AND
PROTECTORATES. THIS LIMITED WARRANTY APPLIES ONLY TO THE ORIGINAL RETAIL PURCHASER, AND DOES NOT
APPLY TO PRODUCTS USED FOR INDUSTRIAL OR COMMERCIAL PURPOSES.
WARRANTY APPLICATION
FOR ONE YEAR from the date of original retail purchase Sanyo Manufacturing Corporation (SMC) warrants this TV to
be free from manufacturing defects in materials and workmanship under normal use and conditions for parts and labor.
For the FIRST 90 DAYS from the date of original retail purchase, Sanyo Manufacturing Corporation will replace any
defective TV via exchange at the retailer. To ensure proper warranty application, keep the original-dated-sales receipt
for evidence of purchase. Return the defective TV to the retailer along with the receipt and the included accessories,
such as the remote control. The defective TV will be exchanged for the same model, or a replacement model of equal
value, if necessary. Replacement model will be contingent on availability and at the sole discretion of Sanyo
Manufacturing Corporation.
THE FOREGOING WARRANTY IS EXCLUSIVE AND IN LIEU OF ALL OTHER WARRANTIES OF MERCHANTABILITY OR
FITNESS FOR A PARTICULAR PURPOSE.
OBLIGATIONS
For one year from the date of purchase, Sanyo Manufacturing Corporation warrants this product to be free from
defects in material and workmanship under normal use and conditions. During the first 90 days under this warranty
for any manufacturing defect or malfunction Sanyo Manufacturing Corporation will provide a new TV via exchange at
the retailer.
HOW TO MAKE A CLAIM UNDER THIS WARRANTY
Please call 1-800-877-5032. Please be prepared to give us the television’s model number and serial number when you
call. The model number and serial number are printed on a label attached to the back of the unit.
For customer assistance, call toll free 1-800-877-5032.
This warranty expresses specific contractual rights; retail purchasers may have additional statutory rights which vary
from state to state.
(EFFECTIVE: March 1, 2007)
Your Sanyo HDTV is registered at the time of purchase, please keep sales receipt for future reference.
For your protection in the event of theft or loss of this product, please fill in the information requested
below and KEEP IN A SAFE PLACE FOR YOUR OWN PERSONAL RECORDS.
Model No.______________________________
Date of Purchase _________________________
Purchase Price___________________________
Where Purchased_________________________
Serial No.______________________________
(Located on back of unit)
Sanyo Manufacturing Corp.
3333 Sanyo Road, Forrest City, AR 72335
Need help?
1-800-877-5032
15
Download from Www.Somanuals.com. All Manuals Search And Download.
For assistance:
Visit our Web site:
or call toll free:
1-800--877-5032
We’ll be glad to Help
Sanyo Manufacturing Corp.
3333 Sanyo Road, Forrest City, AR 72335
Printed in Mexico SMC, August 2011
Impreso en México SMC, agosto 2011
Imprimé aux. Mexique SMC, août 2011
US2F / 26-Z6JE / GXFA
Download from Www.Somanuals.com. All Manuals Search And Download.
|