INSTRUCTION MANUAL
DC-TS760
DVD Home Theatre System
REMOTE CONTROLLER RB-TS760ST
Download from Www.Somanuals.com. All Manuals Search And Download.
CONTROLS
Front panel
1
2
3
4
5
6
7
8
11
10
9
1. Disc tray
7. Play button (a)
2. Open/Close button (q)
3. Function button (FUNCTION)
4. Preset tuning, Skip/Next/Previous buttons (f – PRESET + e)
8. Power button (z/ON)
9. Headphones socket (PHONES)
10. Volume control (VOLUME)
11. Remote sensor (IR)
5. Display
6. Stop button (n)
Display
3 5 7
1 2 4 6 8
9
10
D
L.M. MP3
WMA
SLEEP
RDS
T
19
18
11
PL
PGM ALL REP.1A
-
B
MONO
ST
C
L R RND
16
15 14
13 12
17
1. Dolby Digital indicator (s D)
2. DTS indicator (dts)
10. Sleep indicator (SLEEP)
11. RDS indicator (RDS)
3. Play indicator (a)
4. Last memory indicator (L.M.)
5. Pause indicator (k)
12. FM mono indicator (MONO)
13. FM stereo indicator (ST)
14. Chapter indicator (C)
6. MP3 indicator (MP3)
7. WMA indicator (WMA)
8. Title and Track indicator (T)
15. Random play indicator (RND)
16. Audio channel indicator (L, R)
17. Repeat mode indicators (ALL, REP., 1, A-B)
18. Programme indicator (PGM)
9. Message or number indicators
(Title, chapter, track, playing time or other information)
19. Dolby Pro Logic indicator (s PL)
ACCESSORIES
RB-TS760ST remote control
R6 (HP 7) battery x 2
AM loop aerial
FM aerial wire
Video lead
Front left speaker lead (Black and White)
Centre speaker lead (Black and Green)
Surround right speaker lead (Black and Gray)
Surround left speaker lead (Black and Blue)
Subwoofer lead (Black and Violet)
Screw kit
Front right speaker lead (Black and Red)
2
Download from Www.Somanuals.com. All Manuals Search And Download.
REMOTE CONTROL
Note:
In this instruction manual, any operation of
pressinganybuttonwhilepressingtheSHIFT
button is as shown below.
Example:“PresstheSHIFT+1ANGLE
buttons.”
7
9
1
8
30
2
3
Controls
1. Power button (z/ON)
2. Number and other function buttons
Number buttons (1 - 9, 0)
Angle button (ANGLE)
Angle replay button (A.REPLAY)
Zoom button (ZOOM)
Audio button (AUDIO)
Sleep button (SLEEP)
3. TV control buttons
Note:
10
6
5
4
11
29
27
28
26
12
14
13
15
-
Only SANYO TVs can be operated
using this remote control.
-
There may be some TV models that
cannot be operated with this remote
control.Ifthisisthecase,usetheoriginal
remote control supplied with the TV.
25
16
24
22
17
19
23
21
18
20
Power button (TV POWER)
TV/Video select button (TV/VIDEO)
Channel scanning buttons (TV CH)
4. Tuner controls
REMOTE CONTROLLER RB-TS760ST
REMOTE CONTROLLER RB-TS760ST
Radio data system mode button (RDS
)
Tuner function/Band select button (TUNE/
BAND)
8. Return button (RETURN)
9. Clear/Trim button (CLEAR/TRIM)
10. Test tone button (TEST)
21. Last memory button (L.MEMO)
22. Picture mode/Search mode button
Tuning/Programme type select buttons
(TUNE/PTY)
Preset tuning/Programme type check
buttons (PRESET/PTY CHK)
5. Amplifier controls
(PICTURE MODE/SEARCH MODE)
11. Menu button (MENU)
23. Forward slow button (F.SLOW
24. Reverse slow button (R.SLOW
)
)
12. Directional arrow buttons (4, a, 5, b)
13. On-screen display button (ON SCREEN)
14. Play button (a)
Surround button (SURROUND)
Muting button (MUTE)
25. Fastforward/Fastreversebuttons(d,c)
26. Pause/Step button (k)
15. Stop button (n)
27. Top menu button (TOP MENU)
28. Enter button (ENTER)
29. Setup button (SETUP)
30. Programme/Random play button
(PROGRAM/RANDOM)
Bass button (BASS)
Sound preset button (SOUND)
Function button (FUNCTION)
Volume buttons (VOLUME)
6. Shift button (SHIFT)
16. Skip/Next/Previous buttons (f, e)
17. Subtitle on/off button (S.T.ON/OFF)
18. Subtitle change button (S.T.CH)
19. Repeat button (REPEAT)
20. A-B repeat button (A-B REP)
7. Open/Close button (OPEN/CLOSE)
Inserting batteries
Install two “R6 (HP 7)” batteries.
Remote control range
Remote sensor
Within approx.
6 meters
Note:
30°
30°
Remove the batteries if the remote control is not to be used for a month
or more. Batteries left in the unit may leak and cause damage.
3
Download from Www.Somanuals.com. All Manuals Search And Download.
BASIC CONNECTIONS
After all connections have been made, connect the mains lead to an AC outlet .
Note:
-
-
Do not connect the mains lead to an AC outlet until all connections have been made.
The system is not completely disconnected from the mains when the z/ON button is set to the z position.
Speaker connections
To achieve proper stereo reproduction, connect the speaker wires without shorting to adjacent wires as shown in figure.
Note:
Speaker wire colour
Black and Red
Black and White
Black and Green
Black and Gray
Black and Blue
Use
The SPEAKERS sockets are designed for use only with the supplied
speakers. Do not use with other speakers. Connecting other speaker may
damage the speaker and/or the unit.
If using other speakers, check their impedance/input power.
FRONT/CENTER/SURROUND: 8 Ω or more/50 W or more
SUBWOOFER: 4 Ω or more/80 W or more
Front right speaker
Front left speaker
Centre speaker
Surround right speaker
Surround left speaker
Subwoofer
Black and Violet
Front right speaker
Front left speaker
Centre speaker
Black
Red
Black
Red
Black
Red
Black
Red
Black
Black
Green
White
JCX-TS760
Black
Violet
INPUT
Black
Red
Surround right speaker
Surround left speaker
Black
Black
Red
Black
Black
Red
Blue
Gray
Subwoofer
4
Download from Www.Somanuals.com. All Manuals Search And Download.
Speaker placement
Front right speaker
Centre speaker
The supplied speakers have built-in magnetic stray
field compensation. They may be placed close to a
TV without affecting the colour purity.
The five speakers are all the same and can be used
for front left, centre, front right, surround left and
surround right speakers.
Front left speaker
Surround right speaker
Subwoofer
Surround left speaker
Centre speaker
The front, centre, and surround speakers should be placed at
approximately the same distance from the listening position.
Place the front left and right speakers either side of the TV.
Place the centre speaker directly above the TV.
Place the surround speakers either sides of the listening
position, or slightly to the rear, approximately 60 cm ~ 1 meter
higher than ear level.
Front left speaker
Subwoofer
Front right speaker
30° 30°
The subwoofer can be placed near the front speaker and not
too far from the TV.
Note:
-
-
120°
Surround left
speaker
Surround right
speaker
The angles in the diagramme are approximate.
Please refer to “Setting audio” on Page 21.
Example: To hang the speaker on a wall
Example: To mount the speaker with a stand
Approx. 3 mm
Stand (not supplied)
Built-in special nut, 3/16 inch
diameter
Screw (supplied)
Round head screw
(not supplied)
Note: Take care when installing the speakers. They may cause damage or serious injury should they fall from their mountings.
5
Download from Www.Somanuals.com. All Manuals Search And Download.
AM loop aerial
Assemble the loop aerial.
Aerial connections
FM external aerial
2
1
AM loop aerial
Unwind the aerial wires, then connect the plug to the AM LOOP terminal.
If you have difficulty inserting the plug, turn it over and reinsert it. Place the
loop aerial in a position which yields the best AM reception, or attach it to
a wall or other surface.
JCX-TS760
1
3
2
Aerial wire
Screws (not supplied)
In areas close to a transmitter the simple indoor aerial is sufficient to
receive broadcasts. Extend the aerial wire as straight as possible and,
while listening to the sound from the system, secure it in a position which
yields minimal distortion and noise.
Note:
To minimize noise, the speaker, mains and any other leads should not
come close to the indoor or external aerial lead and AM loop aerial. Do not
place the aerial leads close to the system.
In fringe areas or where reception is distorted or noisy, an FM external
aerial (not supplied) should be connected instead of the simple indoor
aerial. Consult your dealer.
Connecting to a TV with the video lead
Connect the video lead between the MONITOR OUT VIDEO socket of the unit and the video input socket of the TV.
TV
JCX-TS760
AUDIO
VIDEO
INPUT
1
R-AUDIO-L VIDEO
Video lead
Notes on connections
-
-
Please refer to the instruction manuals for the components that you are connecting (TV, VCR, etc.).
When you connect the unit to your TV and other equipment, be sure to turn off the power and disconnect all of the equipments from the AC outlet until
all the connections have been made.
-
Do not connect the MONITOR OUT (S-VIDEO/VIDEO) and AV EURO/TV (AUDIO) IN (RGB OUT) sockets of the unit to a VCR directly. The
playback picture will be distorted because DVD discs are copy protected.
-
Please consult your local audio/video dealer for more details.
6
Download from Www.Somanuals.com. All Manuals Search And Download.
ADDITIONAL CONNECTIONS EXAMPLES
Connecting to a TV with an EURO-AV/SCART lead
Please follow the steps below before turning on the power.
1. If your TV has an EURO-AV/SCART socket, connect the unit as shown. (Do not connect the video lead to the MONITOR OUT VIDEO socket.) You
can enjoy high quality picture playback.
2. Set the VIDEO OUT SELECT switch to RGB.
JCX-TS760
TV
2
EURO-AV/SCART
(RGB input facility)
1
EURO-AV/SCART lead (not supplied)
Connecting to a TV with an S-video lead
Please follow these steps before turning on the power.
1. If your TV has an S-video input socket, connect the unit as shown. (The MONITOR OUT VIDEO socket connection is not necessary.) You can enjoy
clearer picture playback.
2. Set the VIDEO OUT SELECT switch to S-VIDEO.
JCX-TS760
2
S-VIDEO IN 1
TV
1
S-Video lead (not supplied)
TV or Audio equipment connections
Connect an audio lead between the VIDEO (AUDIO) IN sockets of the unit and the audio output sockets of the TV or audio equipment.
TV or Audio equipment
JCX-TS760
(such as MD deck etc.)
AUDIO OUT
L
R
Audio lead (not supplied)
Headphones
Connect stereo headphones (not supplied) to the PHONES socket for monitoring or for private listening. The speakers are automatically disconnected
when headphones are connected.
Manufactured under license from Dolby Laboratories.
“Dolby”, “Pro Logic” and the double-D symbol are trademarks of Dolby Laboratories.
“DTS” and “DTS Digital Surround” are registered trademarks of Digital Theater Systems, Inc.
7
Download from Www.Somanuals.com. All Manuals Search And Download.
SYSTEM CONNECTIONS EXAMPLES
JCX-TS760, TV and Audio equipment
TV
Aerial
EURO-AV/SCART
(RGB input facility)
AERIAL
IN
Aerial lead (not supplied)
EURO-AV/SCART lead (not supplied)
Audio equipment
(such as MD deck etc.)
AUDIO OUT
L
R
JCX-TS760
Audio lead (not supplied)
JCX-TS760, TV and VCR
TV
Aerial
EURO-AV/SCART
(Audio monitor out)
AERIAL
IN
Aerial lead (not supplied)
EURO-AV/SCART lead
(not supplied)
Aerial lead (not supplied)
EURO-AV/SCART lead (not supplied)
VCR
AUDIO OUT
L
IN
AV
AERIAL
OUT
R
JCX-TS760
Audio lead (not supplied)
8
Download from Www.Somanuals.com. All Manuals Search And Download.
JCX-TS760, TV, VCR and Audio equipment
TV
Aerial
EURO-AV/SCART
(Audio monitor out)
AERIAL
IN
Aerial lead (not supplied)
EURO-AV/SCART leads (not supplied)
Audio equipment
VCR
(such as MD deck etc.)
AUDIO OUT
L
AUDIO OUT
IN
AV
L
AERIAL
R
R
OUT
JCX-TS760
Aerial lead (not supplied)
Audio lead (not supplied)
JCX-TS760, TV, VCR, STB and Audio equipment
TV
Aerial
EURO-AV/SCART
(Audio monitor out)
AERIAL
IN
Aerial lead (not supplied)
EURO-AV/SCART leads (not supplied)
Set Top Box
Audio equipment
(not supplied)
(such as MD deck etc.)
AUDIO OUT
L
IN
OUT
AV
AERIAL
OUT
R
IN/OUT
JCX-TS760
EURO-AV/SCART
lead (not supplied)
Aerial lead
(not supplied)
Audio lead (not supplied)
VCR
AUDIO OUT
L
IN
AV
AERIAL
OUT
R
Aerial lead (not supplied)
9
Download from Www.Somanuals.com. All Manuals Search And Download.
This instruction manual explains the various functions of this unit using the remote control.
The buttons on the main unit perform similar functions to similarly marked buttons on the remote control.
BEFORE OPERATION
Turning the power on and off
Selecting the sound mode
Press the z/ON button. “HELLO” appears briefly on the display. (After
connecting the mains lead, when you press the z/ON button for the first
time, the volume-reset feature automatically sets the initial volume level.)
Toturnthepoweroff,pressthez/ONbuttonagain.“GOOD-BYE”appears
briefly.
1. PresstheSOUNDbuttonrepeatedlytoselectthedesiredsoundmode
(“BASS”, “TREBLE”, “CINE”:Cinema or “QS”:Q-Surround).
2. Press the button as desired.
Sound mode
BASS
TREBLE
CINE
Press
Display change
4 or 5 “+5” ~ “–5”
4 or 5 “+5” ~ “–5”
ENTER “ON” or “OFF”
ENTER “LOW” or “HI”
-
When the mains lead is connected to the AC outlet, the unit will
respond to commands from the remote control.
QS
Direct start function
If the following buttons are pressed when the unit is in standby, the unit
turns on automatically and the selected function is activated.
Note for “CINE”:
When enjoying a DVD disc with the volume set low at night, select this
mode. It enhances spoken lines making speech clearer.
Remote control
Main unit
a (Play), TUNE/BAND, OPEN/CLOSE
a, q
3. Repeat steps 1 - 2 for another sound mode.
4. Press the SOUND button repeatedly to close the display.
Selecting the function
Press the FUNCTION button to select the desired function. Each time the
Bass boost system
Press the BASS button to select the desired bass boost effect.
button is pressed, the display changes as follows:
DVD/CD
v
TV
v
VIDEO
v
FM TUNER
v
AM TUNER
v
. . .
BOOST
v
BASS OFF
v
NORMAL . . .
-
When the function selection is changed, disc play is automatically
stopped.
Adjusting the display brightness
While pressing the n button on the main unit, press the ON SCREEN
button on the remote control.
Adjusting the volume
Press the “+” or “–” VOLUME button (or turn the VOLUME control on the
main unit). The volume level appears on the display (VOL 0 ~ VOL MAX).
DIMMER 1
v
DIMMER 2
v
DIMMER 0 . . .
To reduce the volume temporarily
Press the MUTE button. “MUTE” blinks on the display. To restore the
previous volume setting, press the MUTE button again.
10
Download from Www.Somanuals.com. All Manuals Search And Download.
VARIOUS ADJUSTING
Selecting surround mode
Adjusting the speaker volume balance
This unit is set to the standard level before shipping from the factory. You
may not need adjustment.
Press the SURROUND button to select the surround mode. Each time the
button is pressed, the surround mode changes as follows:
AUTO
v
QS 5.1 ST
v
QS 5.1 MN
v
2.1ch . . .
But, dependingonthesizeoftheroomandtheplacementofthespeakers,
you may need a fine adjustment.
In this case, follow the steps below. Please use the remote control at the
listening point.
When “DVD/CD” function is selected
AUTO
The unit selects the surround mode automatically depending on the
disc.
1. Press the FUNCTION button to select “DVD/CD”.
2. Press the n button to stop play completely.
3. Press the TEST button. The speaker screen appears.
-
IfaDVDdiscisencodedwithDolbyDigital, “s D”appearsonthe
display, and it is played back with Dolby Digital 5.1 channel
surround sound.
Speaker
Not all DVD discs are encoded with Dolby Digital 5.1 channel
surround sound.
Front-L
0
Center
Front-R
-
-
If a DVD disc is encoded with Dolby Digital 2-channel or mono,
both “s D” and “s PL” appear on the display. The surround
mode is set to Dolby Pro Logic mode.
If a DVD disc is encoded with 2-channel Liner PCM, “s PL”
appears on the display. The surround mode is set to Dolby Pro
Logic mode.
Surround-L
Surround-R
-
-
If a DVD disc is encoded with DTS Surround, “dts” appears on the
display, and it is played back with DTS surround sound.
VCD, Audio CD, MP3 and WMA discs are played back with Q-
Surround 5.1 channel surround sound.
“FNT-L 0” appears on the display.
The test tone will be heard from each speaker sequentially as follows:
TV screen
Front-L
Display
FNT-L 0
CENT 0
Speaker
Front left speaker
Centre speaker
QS 5.1 ST
Center
Disc is played back with Q-Surround 5.1 channel surround sound.
For 2-channel source, it uses Virtual 5.1 channel surround sound.
Front-R
Surround-R
Surround-L
FNT-R 0 Front right speaker
SUR-R 0 Surround right speaker
SUR-L 0 Surround left speaker
QS 5.1 MN
When using a monaural source, select this mode. It uses Virtual 5.1
channel surround sound.
4. Press the “+” or “–” VOLUME button until the test tone is at a
comfortable level.
5. If the test tone level is not the same from each speaker, press the 5
or 4 button to adjust it while the speaker is active. The level appears.
2.1ch
Thesurroundmodeissetto2.1channel(Frontleftandrightspeakers,
and Subwoofer).
Front-L/Front-R: “0” ~ “–10”
Center/Surround-R/Surround-L: “+10” ~ “–10”
When “TV”, “VIDEO”, “FM TUNER” or “AM TUNER” function is
selected
If necessary, repeat this step again.
6. Press the TEST button to turn the test tone off.
Note:
AUTO
ThesurroundmodeissettoQ-Surround5.1channelsurroundsound.
If no adjustments are made, the original display returns after the test
tone has cycled round 5 times.
QS 5.1 ST
ThesurroundmodeissettoQ-Surround5.1channelsurroundsound.
For 2-channel source, it uses Virtual 5.1 channel surround sound.
Adjusting the subwoofer level
1. Press the SHIFT + TRIM buttons. “FNT-L 0” appears on the display.
QS 5.1 MN
Note: No test tone.
When using a monaural source, select this mode. It uses Virtual 5.1
channel surround sound.
2. Press the ENTER button repeatedly to select “SUB.W”.
Each time the button is pressed, the display shows the selected
speaker and tone level.
2.1ch
Thesurroundmodeissetto2.1channel(Frontleftandrightspeakers,
and Subwoofer).
3. Press the 5 or 4 button to adjust the level as desired.
SUB.W: “+10” ~ “–10”
When headphones are connected while any of the surround modes are
selected, the surround mode changes as follows:
Note:
If another speaker is selected, the level also can be changed as
above.
AUTO HP
v
QS HP ST
v
QS HP MN
v
2ch HP . . .
AUTO HP/QS HP ST
Q-Surround effect.
4. Press the SHIFT + TRIM buttons to turn it off.
Note:
If no adjustments are made, the original display returns after
approximately 10 seconds.
QS HP MN
Surround effect when monaural programme material used.
Set the delay time for your centre and surround speakers. See “Setting
audio” on Page 21.
2ch HP
Normal 2-channel sound.
Note:
When receiving weak FM broadcasts, set the mode to “2.1ch”. The sound
quality may improve.
11
Download from Www.Somanuals.com. All Manuals Search And Download.
PLAYABLE DISCS
The following types of discs can be played on this unit.
Note:
-
Only the above types of discs can be played on this unit.
DVD-ROM, CD-ROM, SVCD, CVD, etc. cannot be played.
This unit can play back the Video CD (VCD).
This unit can play back the DVD-R that has recorded movie data.
However, some DVD-Rs cannot be played back depending on the
recording conditions.
Disc type and logo mark
-
-
DVD Video
Audio CD
-
-
The DVD-R that has no movie data cannot be played back.
This unit is to be used exclusively with the PAL (or NTSC) colour
system discs. SECAM system discs cannot be used with this unit.
For DVD discs: The video output signal format can be selected (“PAL
60” or “NTSC”) when playing back the NTSC DVD discs.
For MP3/WMA CD, please see Page 18.
-
-
-
Region number
For Picture/JPEG CD, please see Page 19.
Region number (Regional restriction code) is built-in to the unit and DVD
discs.
There is a region number on the rear of the unit.
The same region number or region number “ALL” of DVD discs can be
used on this unit.
Notes on handling discs
-
Do not expose the disc to direct sunlight, high humidity or high
temperatures for extended periods of time.
-
-
-
Discs should be returned to their cases after use.
Do not apply paper or write anything on the disc surface.
Handle the disc by its edge. Do not touch the playing surface (glossy
side).
DVD disc
There are the marks on some DVD disc packages.
Example:
-
-
Fingerprintsanddustshouldbecarefullywipedofftheplayingsurface
of the disc with a soft cloth.
Wipe in a straight motion from the centre to the outside of the disc.
Never use chemicals such as record cleaning sprays, antistatic
sprays or fluids, benzene or thinner to clean discs.
3
16:9 LB
2
Multiple languages
Multi-language subtitles
Multi-angle
Multi-aspect
2
Region number
Closed caption
3
DVD discs are divided into titles, and the titles are sub-divided into
chapters.
Title 1
Title 2
Chapter 1 Chapter 2
Chapter 1
Chapter 2
Chapter 3
Track 5
Video CD/Audio CD disc
Video CD/Audio CD discs are divided into tracks.
Track 1
Track 2
Track 3
Track 4
12
Download from Www.Somanuals.com. All Manuals Search And Download.
DISC PLAY
Important note:
-
-
This “DISC PLAY” explains the basic instruction of the DVD player section.
Some DVD or VCD discs have different functions that may not be explained in this instruction manual. You may need extra instructions. In this
case, please follow the instructions displayed on the TV screen or jacket or case of the disc.
-
“
” may appear on the TV screen during operation. This icon means that the function is not available on the disc now.
If a menu appears on the TV screen...
Preparations
Press the 4, a, 5 or b button (or the number buttons),
then press the ENTER button to select the desired
menu. Playback of the selected menu starts.
Note:
-
Turn on the TV and select the video input for this unit.
To use the remote control for TV
The remote control must be pointed toward your TV.
1. Press the TV POWER button to turn on the power.
2. Press the TV/VIDEO button to select the video input source.
For more details, please refer to the jacket or case of the disc.
Stopping play
[DVD] [VCD]
Select the playback picture size according to the aspect ratio of the
TV. (See “Setting display” on Page 20.)
-
Select the desired language for the on-screen menus if required. The
following languages can be selected.
English (default), Spanish, French, German, Portuguese
(See “Setting language” on Page 20.)
-
Press the n button once.
Whenyoupressthea (Play)button, playstartsautomaticallyfromthe
point where you stopped.
Note:
Some discs may not resume play.
Press the n button twice. The unit stops completely.
When you press the a (Play) button, play starts from the beginning of
the disc.
Note:
-
-
-
Do not touch the disc tray while it is moving.
Never place anything except a disc on the disc tray. Foreign objects
can damage the unit.
-
-
-
Do not apply excessive force to the disc tray.
[CD]
Only one disc must be placed on the disc tray at a time.
To open or close the disc tray, be sure to use the OPEN/CLOSE (or
q on the main unit) button. Do not press the disc tray with your hand.
-
Press the n button. The unit stops completely.
Continuing play from where you stopped watching (Last memory
play) [DVD]
1. During play, press the L.MEMO button at the point from which you
want to resume play later. “L.M. STOP” appears on the display. Play
stops automatically.
When operation buttons are pressed, that operation is displayed
on the TV screen for several seconds.
2. Remove the disc or turn off the power.
3. Load the disc (and press the a (Play) button), or turn on the power.
“Last Memo Play?” screen appears.
1. Press the OPEN/CLOSE button. “OPEN” appears on the display and
the disc tray opens. “SANYO” logo appears on the TV screen.
-
When using the main unit, use the q button.
2. Place the disc with the label facing up on the disc tray.
Last Memo Play?
Yes
No
12 cm disc 8 cm disc
Clear
(The memory is released.)
4. Press the 4 button to select “Yes”.
5. Press the ENTER button. Play resumes from the point where you
stopped. (If desired, press the L.MEMO button again.)
Note:
3. Press the OPEN/CLOSE button again. The disc tray closes and
“READING” appears on the display.
Note:
-
-
Points on up to 3 discs can be memorized.
The Last Memory Play mode may not work correctly with some discs.
Some discs may start play automatically.
What is “PBC”?
Starting play
“PBC”isanabbreviationfor“PlaybackControl”thatreferstocontrolcodes
prerecorded on Video CDs.
During playback of Video CD with PBC, “PBC” appears on the display.
Press the a (Play) button. The DVD/CD function is selected and play
starts automatically.
Example of display:
D
To lock the disc tray
C
You can lock the disc tray to prevent misuse by young children.
While the disc tray is opened, press the OPEN/CLOSE button until
“LOCKED” appears on the display. (The disc tray closes.)
Chapter number
Elapsed playing time
-
The OPEN/CLOSE (or q on the main unit) button will not function.
To release this mode, press the OPEN/CLOSE button until
“UNLOCKED” appears on the display.
Note:
If “NO DISC” appears on the display, load the disc.
-
If the disc is loaded with the label side downward (and it is a single
sided disc), or if a badly scratched disc is loaded, “NO DISC” (or “NO
PLAY”) appears. If this occurs, load the disc correctly or replace the
disc.
13
Download from Www.Somanuals.com. All Manuals Search And Download.
VARIOUS DISC PLAYING FUNCTIONS
“
” may appear on the TV screen during operation. This icon means that the function is not available on the disc now.
Selecting a DVD menu [DVD]
1. Press the MENU button. The main menu screen appears.
Track search [VCD] [CD]
Press the number buttons during play or in the stop mode, then press the
Note:
a (Play) button. Play starts from the selected track.
Press the MENU button again to resume play.
2. Press the 4, 5, b or a button (or the number buttons) to select the
desired menu, then press the ENTER button. The selected menu play
starts.
Time search
[DVD]
1. Press the SHIFT + SEARCH MODE buttons three times during play.
The time search screen appears.
Example:
Selecting a top menu [DVD]
1. Press the TOP MENU button. The top menu appears.
2. Press the 4, 5, b or a button (or the number buttons) to select the
desired menu, then press the ENTER button. The selected menu play
starts.
Time Search
--:--:--
2. Press the number buttons to enter the time.
Example:
Note:
Selecting a menu operation may differ depending on the disc used and
may not be possible on some discs.
20 minutes 5 seconds
1 hour 4 minutes 35 seconds
Press 2, 0, 0 then 5.
Press 1, 0, 4, 3 then 5.
-
If you make a mistake, press the CLEAR button.
3. Press the a (Play) button. Play starts from the searched time.
Return button (RETURN) for Video CD
Normally, it returns to the previous menu when the RETURN button is
pressed during play.
[VCD] [CD]
1. Press the SHIFT + SEARCH MODE buttons once during play. The
time search screen appears.
2. Press the number buttons to enter the time.
3. Press the a (Play) button. Play starts from the searched time in the
track.
Note:
The operation differs according to the content of the Video CD.
Chapter (Track) skip
Fast play
Press the c or d button repeatedly to select the fast speed forward or
reverse play.
[DVD] [VCD]
Skipping forward
Press the e button during play to skip to the next chapter (or track). A
chapter (or track) is skipped each time the button is pressed.
“c 1”, “c 2”, “c 3”, “c 4” or “d 1”, “d 2”, “d 3”, “d 4”
[CD]
“c 1”, “c 2” or “d 1”, “d 2”
Press the a (Play) button to return to normal play.
Skipping backward
Press the f button during play to skip back to the beginning of the
chapter (or track) currently play. Press the button again immediately to
skip back to the beginning of the previous chapter (or track).
Slow-motion play
[DVD]: Forward/Reverse slow play, [VCD]: Forward slow play only
Press the F.SLOW
forward or reverse slow speed play.
1”, “ 2”, “ 3”, “ 4” or “
or R.SLOW
button repeatedly to select the
Note:
You can skip only through the chapters, not over the title on the DVD disc.
“
1”, “ 2”, “ 3”, “ 4”
Press the a (Play) button to return to normal play.
Title search [DVD]
Note:
1. Press the SHIFT + SEARCH MODE buttons once during play or in the
stop mode. The title search screen appears.
Example:
The sound is muted during fast play or slow-motion play in DVD/VCD.
Still picture (Pause)
[DVD] [VCD]: Still picture mode, [CD]: Pause mode
Press the k button during play.
Title Search
-- /28
Press the a (Play) button to return to normal play.
Note: The sound is muted.
2. Press the number buttons to enter the title number.
Example:
To select No. 3, press 0, then 3 (or press 3).
To select No. 10, press 1, then 0.
To select No. 24, press 2, then 4.
Frame by frame advance play [DVD] [VCD]
Press the k button during still play. Each time the button is pressed, the
picture advances one frame.
Press the a (Play) button to return to normal play.
Note:
-
If you make a mistake, press the CLEAR button.
3. Press the a (Play) button. Play starts from the selected title.
-
-
The sound is muted.
Frame play is operative in forward mode only.
Chapter search [DVD]
1. Press the SHIFT + SEARCH MODE buttons twice during play. The
chapter search screen appears.
Example:
Title
01 Chapter Search
-- /35
2. Press the number buttons to enter the chapter number.
3. Press the a (Play) button. Play starts from the selected chapter.
14
Download from Www.Somanuals.com. All Manuals Search And Download.
Picture zoom (Pin point zoom) [DVD]
Repeat play
Press the REPEAT button during play of the title (or track) you want to
repeat. Each time the button is pressed, the repeat mode changes as
follows.
TV screen
[DVD]
Chapter
Title
Display
Operation
1. Press the SHIFT + 3 ZOOM buttons during normal, slow or still play.
The pin point guide screen appears.
REP. 1
Repeat of chapter being played
ALL REP. Repeat of title being played
Repeat off mode
Off
[VCD] [CD]
1
REP. 1
Repeat of track being played
1
4
7
2
5
8
3
6
9
All
Off
ALL REP. Repeat all tracks
Repeat off mode
During programmed play [VCD] [CD]
Program 1 REP. 1
Repeat of track being played
Program All ALL REP. Repeat all programmed tracks
-
If you quit the screen, press the SHIFT + 3 ZOOM buttons.
Off
Repeat off mode
2. Press the 4, a, 5 or b button, then the ENTER, or press the number
button to select the zoom point.
Designated range repeat play (A-B Repeat)
The screen is magnified. “ 1” appears briefly on the screen.
If necessary, press the 4, a, 5 or b button repeatedly to move the
screen.
3. Press the SHIFT + 3 ZOOM buttons again. The screen is magnified
more than “ 1”. “ 2” appears briefly.
4. Press the SHIFT + 3 ZOOM buttons to return to the original screen.
Note:
Picture zoom may not work on some discs.
1. Press the A-B REP button during play at the beginning of the section
you want to repeat (Point A). “
A-” appears on the screen. “REP.
A-” appears and “A-” blinks on the display.
2. Press the A-B REP button again at the end of the section (Point B).
“REP. A-B” remains lit on the display.
Viewing from a desired camera angle (Multi-Angle)
[DVD]
The section between points A and B is played repeatedly.
3. To return to normal play, press the A-B REP button again.
Note:
Repeat play or A-B repeat play mode may not work correctly with some
discs.
SomeDVDdiscsmaycontainsceneswhichhavebeenshotsimultaneously
from a number of different camera angles. The jacket or case of discs that
are recorded with angles will be marked.
Notes on using Video CD with PBC
To use the repeat play or A-B repeat play mode, select PBC off play mode
as follows.
Example:
In the stop mode, press the number buttons to select the track number
then press the a (Play) button.
3
Note: The recorded angles differ depending on the disc used.
Random play [CD]
1. Play the disc that is recorded with angles.
2. Press the SHIFT + 1 ANGLE buttons repeatedly until the desired
1. Press the PROGRAM/RANDOM button once in the stop mode.
“Random” appears on the screen and “RND” blinks on the display.
2. Pressthea(Play)buttontobeginrandomplay.“RND”remainslit.The
unit will automatically select tracks at random.
Note:
angle appears.
Example:
3/5
The A-B REP and SEARCH MODE buttons do not work during random
play.
Angle replay [DVD]
During Multi-angle play screen, press the SHIFT + 2 A.REPLAY buttons.
The unit skips back to last approximately 10 seconds, changes it to the
next camera angle and plays it, and continues play. (If desired, press the
buttons again.)
15
Download from Www.Somanuals.com. All Manuals Search And Download.
Note:
-
Programmed play [VCD] [CD]
Up to 20 selections can be programmed.
In some cases, the subtitle language is not changed to the selected
one.
Programming procedure
-
When a disc supporting closed caption is played, the subtitle and the
closed caption may overlap each other on the TV screen. In this case,
turn the subtitle off.
When the desired language is not selected even if the button is
pressed, the language is not available on the disc.
When the power is turned on or the disc is replaced, select the subtitle
language again.
1. Press the PROGRAM/RANDOM button once (VCD) or twice (CD) in
the stop mode. The programme mode screen appears and “PGM”
blinks on the display.
2. Press the number buttons to select the track number.
Example:
-
-
-
To select track No.3, press 0, then 3.
To select track No.10, press 1, then 0.
To select track No.24, press 2, then 4.
If the subtitle language is not necessary, press the S.T.ON/OFF
button to select “
Off”.
-
If you make a mistake, press the CLEAR button.
3. Press the 5 button to move the highlighted box down.
Selecting audio soundtrack language (Multi-
Language) [DVD]
Example:
Program Mode
All Clear
1 03
2 --
3 --
4 --
5 --
6 --
7 --
8 --
9 --
10 --
11 --
12 --
13 --
14 --
15 --
16 --
17 --
18 --
19 --
20 --
Hello!
Holà!
¡Hola!
This operation works only with discs on which multiple audio soundtrack
languages are recorded.
1. Press the SHIFT + 5 AUDIO buttons during play.
2. Press the SHIFT + 5 AUDIO buttons repeatedly until the desired
language appears on the screen.
4. Repeat step 2 - 3 above to select another track.
5. Press the a (Play) button to start play. “PGM” remains lit.
When all programmed selections have played, the unit stops
automatically.
Example:
-
The programme contents are retained in memory.
Note:
1/4 fr
To play the programme again, press the PROGRAM/RANDOM button
once (VCD) or twice (CD) to call up the programme mode screen, then
press the a (Play) button.
French
To clear the programme one by one
In the programme mode, press the 4 or 5 button to select the track
number. Then press the CLEAR button.
1/3 DTS
DTS sound
To clear all the programmes
In the programme mode, press the 4 button to select “All Clear”. Then
press the ENTER button.
Note:
-
-
-
When the desired language is not selected even if the button is
pressed, the language is not available on the disc.
When the power is turned on or the disc is replaced, select the
language again.
To change the programme
1. In the programme mode, press the 4 or 5 button to select the track
number.
Ifthelanguageisnotrecordedonthedisc,onlytheavailablelanguage
on the disc will be heard.
2. Press the number buttons to select the track number to be replaced.
Press the PROGRAM/RANDOM button to quit the programme mode
screen.
Changing the audio channel output [VCD]
During VCD play, press the SHIFT + 5 AUDIO buttons to select an audio
channel.
Selecting subtitle language [DVD]
This operation works only with discs on which multiple subtitle languages
Left Mono (L)
v
Right Mono (R)
v
Stereo
v
...
are recorded.
1. PresstheS.T.ON/OFFbuttonduringplay.Thesubtitlelanguagemark
appears on the screen (Example:
press the button again.
1/3 en). If “
Off” appears,
2. PresstheS.T.CHbuttonrepeatedlyuntilthedesiredsubtitlelanguage
appears on the screen.
Example:
3/3 fr
French
After few seconds, “ ” disappears.
16
Download from Www.Somanuals.com. All Manuals Search And Download.
Example for VCD:
1. Press the ON SCREEN button during play.
Selecting on-screen information
Press the ON SCREEN button repeatedly to show the disc information
(Title, Chapter, Title elapsed playing time, Language, etc.).
Track elapsed playing time
02:29
Example for DVD:
1. Press the ON SCREEN button during play.
Chapter remaining playing time
Title elapsed playing time
2. Press the ON SCREEN button again.
Track elapsed playing time
00:08:20 00:01:45
VCD
Track 2/22
02:29
2. Press the ON SCREEN button again.
Chapter remaining playing time
Title elapsed playing time
Chapter number
Track number
3. Press the ON SCREEN button again to close the disc information.
Title number
Note:
For Audio CD, please refer to “Example for VCD” as above.
DVD
Title 1/2
Audio
00:08:40 00:00:23
Chapter 3/35 1/3
1/4 Dolby D 5.1 Ch en
2/3 fr
Selecting picture mode
Press the PICTURE MODE button. Each time the button is pressed, the
Subtitle
picture mode changes as follows:
Camera angle
A kind of audio
Subtitle language
Audio language
Standard
v
Mild
v
Black and White
v
. . .
3. Press the ON SCREEN button again to close the disc information.
17
Download from Www.Somanuals.com. All Manuals Search And Download.
MP3/WMA CD OPERATION
Before starting
ThisunitcanplaybacktheCDthathasrecordedmusicdata, MP3orWMA
MP3/WMA CD play
1. Load the MP3/WMA CD.
(Windows Media Audio) files.
“FILE” appears on the display and a table of contents in the first
directory appears on the screen.
Example:
-
-
The file system is ISO9660 level 1 and level 2.
IftheCDhasbothaudioCDtracksandMP3/WMAfiles, onlyaudioCD
tracks are played.
-
-
-
It would take 30 seconds or more for this unit to read MP3/WMA files
depending on its structure.
File
-/24
00:00:00
This unit can recognize up to 256 files or folders per disc. The CD with
257 files or folders and over is not available to this unit.
MP3/WMA CDs may not be played in the recorded order.
1. Please use the MP3 or WMA software with the function that can
record data alphabetically or numerically.
HYPER-EURO-MAX
1
2
3
4
5
6
7
MUSIC001
MUSIC002
MUSIC003
MUSIC004
MUSIC005
MUSIC006
MUSIC007
8
9
10
11
12
MUSIC008
MUSIC009
MUSIC010
MUSIC011
MUSIC012
2. Please refrain from making many sub-folders by preference.
However, some CD-R/RWs and MP3/WMA CDs cannot be played back
depending on the recording conditions.
Before playing back MP3 or WMA files, please read the following.
MP3 CD
File: MUSIC001
-
-
MP3 files must have the extension letters, “.MP3” or “.mp3”.
Standard, sampling frequency, and the bit rate:
MPEG-1 Audio
File information
32kHz, 44.1kHz, 48kHz
2. Press the 4, a, 5 or b button to move the highlighted box to the
32kbps ~ 320kbps (constant bit rate or variable bit rate)
The recommend recording setting for a high-quality sound is 44.1kHz
of sampling frequency and 128kbps of constant bit rate.
desired file.
-
-
To go on to the next or previous directory, press the 4, a, 5 or b
button.
-
-
To go back to the previous directory, press the RETURN button.
In some discs, if the MENU button is pressed, it goes back to the
first directory.
WMA CD
-
When creating a WMA disc, be sure the copyright function is off. DRM
files cannot be played back.
3. Press the ENTER or a (Play) button to start play.
The letter’s colour in the highlighted box turns green. “MP3” or “WMA”
appears on the display.
-
-
WMA files must have the extension letters, “.WMA” or “.wma”.
Standard, sampling frequency, and the bit rate:
WMA version 7, and 8
Example: (the second directory)
32kHz, 48kbps ~ 64kbps
44.1kHz, 48kbps ~ 192kbps
48kHz, 128kbps ~ 192kbps
Current file elapsed playing time
Total file number
Current file number
Microsoft,WindowsMedia,andWindowsLogoaretrademarksorregistered
trademarks of Microsoft Corporation in both the United States and other
countries.
File
MAX2
13/24 00:00:08
Limitations on display
-
Availablelettersfordisplayarethefollowing:capitalorsmallalphabets
of A through Z, and numbers of 0 through 9.
Other letters than those above are replaced in “-” (hyphen).
13
14
15
16
17
18
19
MUSIC013
MUSIC014
MUSIC015
MUSIC016
MUSIC017
MUSIC018
MUSIC019
20
21
22
23
24
MUSIC020
MUSIC021
MUSIC022
MUSIC023
MUSIC024
-
Note:
The CD has no music data or non-MP3/WMA files cannot be played back.
Song: MUSIC013
To stop play, press the n button.
If the disc is mixed with MP3, WMA and JPEG files…
-
If you start from the MP3 or WMA file, the unit plays both MP3 and
WMA files. But the unit skips the JPEG files automatically.
If you start from the JPEG file, the unit plays the JPEG files. But the
unit skips both MP3 and WMA files automatically.
-
18
Download from Www.Somanuals.com. All Manuals Search And Download.
PICTURE CD OPERATION
You can view digital images from KODAK Picture/JPEG files.
If you press the MENU button, the file list appears.
Example:
-
-
The file system is ISO9660 level 1 and level 2.
If the CD has both audio CD tracks and JPEG files, only audio CD
tracks are played.
Picture CD
PICTURES
-/37 00:00:00
-
-
It would take 30 seconds or more for this unit to read JPEG files
depending on its structure.
This unit can recognize up to 256 files or folders per disc. The CD with
257 files or folders and over is not available to this unit.
JPEG CDs may not be played in the recorded order.
JPEG files must have the extension letters, “.JPG” or “.jpg”.
JPEG resolution up to 5760 x 3840.
1
2
3
4
5
6
7
001-1A
8
9
008-8A
009-9A
002-2A
003-3A
004-4A
005-5A
006-6A
007-7A
-
-
-
10
11
12
13
14
010-10A
011-11A
012-12A
013-13A
014-14A
KODAK Picture CD play
With KODAK Picture CD, it is easy to turn film into pictures you can email
from your PC and view on the unit.
Justbringyourfilminforprocessing,andchecktheboxforKODAKPicture
CD. You will get back your prints and negatives as usual - plus you will get
a special CD that contains your pictures along with software that lets you
view, enhance, share, and print your pictures from your PC and view them
on the unit.
File: 001-1A
To start the slide show from the file list:
1. Press the 4, a, 5 or b button to select the desired file.
2. Press the ENTER or a (Play) button to start the slide show.
1. Load the KODAK Picture CD.
The file list appears after the last picture has displayed.
Note:
“PHOTO” appears on the display and the first thumbnail pictures
(maximum 9-picture) appear on the screen.
Example:
-
-
FUJICOLOR CD can be used.
Some discs cannot be played back depending on the recording
conditions.
KODAK and Picture CD are registered trademarks of Eastman Kodak
Company.
JPEG CD play
You can also view digital images from JPEG files on disc created by your
PC.
-
Some JPEG files cannot be played back depending on the recording
conditions.
1. Load the JPEG CD.
“FILE” appears on the display and the file list appears on the screen.
Example:
File
-/43 00:00:00
2. Pressthe4,a,5 orbbuttontomovethecursortothedesiredpicture.
Root
-
To go to the next or previous thumbnail pictures, press the e or
1
2
3
4
5
6
7
001
002
003
004
005
006
007
8
9
008
f button.
3. Press the ENTER or a (Play) button to start the slide show from the
009
010
011
012
013
014
selected picture.
10
11
12
13
14
Press the k button during the slide show to pause. Press the a (Play)
(or k) button to continue.
If the picture appears upside down or sideways,
1) Press the k button, if necessary.
2) Press the SHIFT + 1 ANGLE buttons repeatedly until it’s right side
File: 001
up. “
”, “
”, “
” or “Normal” appears briefly on the
screen.
3) Press the a (Play) (or k) button to skip to the next picture and
2. Press the 4, a, 5 or b button to select the desired file.
3. Press the ENTER or a (Play) button to start the slide show from the
selected file. “PHOTO” appears on the display.
continue the slide show.
If you press the e or f button during the slide show, it skips to the
next picture or previous picture.
The file list appears after the last file has displayed.
-
To stop the slide show, press the n button. The file list appears.
After the last picture has displayed, the last thumbnail pictures appear.
-
To stop the slide show, press the n button. The thumbnail pictures
appear.
If the TOP MENU button is pressed during the slide show, the
thumbnail pictures appear.
Picture zoom
1. Press the k button at the desired picture (KODAK Picture CD and
JPEG CD).
2. Press the SHIFT + 3 ZOOM buttons.
3. Press the 4, a, 5 or b button, then the ENTER, or press the number
button. The picture is magnified.
-
4. Press the a (Play) button to resume the slide show.
19
Download from Www.Somanuals.com. All Manuals Search And Download.
INITIAL SETTINGS FOR DVD
Once the initial settings have been completed, the unit can always be
operated under the same conditions.
Setting display
1. PresstheSETUPbuttoninthestopmode. Thesetupscreenappears.
The settings will be retained in the memory until they are changed, even
if the power is turned off.
Language
Display
Audio
Parental
Setting language
1. Press the SETUP button in the stop mode. The setup screen appears
2. Press the a (Directional arrow) button to select “Display”, then press
and “Language” is highlighted.
the ENTER button. “Display” screen appears.
Language
Display
Audio
Parental
Language
Display
Audio
Parental
2. Press the ENTER button. “Language” screen appears.
3. Press the 5 or 4 button to select the item (highlighted).
Example: To set “OSD” (On screen display)
TV Type
NTSC Disc
4:3 LB
PAL 60
3. Press the 5 or4 button to select the item (highlighted), then press the
ENTER button. The submenu appears.
Language
OSD
Audio
Subtitle
DVD Menu
Display
English
Audio
Parental
Example: To set “TV Type”
TV Type
NTSC Disc
4:3 LB
PAL 60
4:3 LB
4:3 PS
16:9
Disc
Disc
Disc
4. Press the 5 or 4 button to select the submenu (highlighted).
Example: To select “TV Type: 4:3 PS”
“OSD” setting is applied also to VCD and CD.
4. Press the ENTER button. The submenu appears.
Example:
TV Type
NTSC Disc
4:3 LB
PAL 60
4:3 LB
4:3 PS
16:9
Language
OSD
Audio
Subtitle
DVD Menu
Display
English
Audio
Parental
English
Español
Français
Deutsch
5. Press the ENTER button. (In this example, “TV Type: 4:3 PS”
remains.)
6. Repeat steps 3 - 5 for other items.
7. Press the 4 button to skip back to the setup screen (or press the
SETUP button).
Disc
Disc
Disc
Portugues
TV Type:
Select the appropriate setting for your TV screen size.
5. Press the 5 or 4 button to select the language (highlighted).
6. Press the ENTER button. The selected language remains.
7. Repeat steps 3 - 6 for other items.
4:3 LB (Letterbox):
SelectwhenaconventionalTVsetisconnected.
When the wide screen disc is played, the black
bands appear at the top and bottom of screen.
Note:
If “Others” is selected, enter the language code. (See “LANGUAGE
CODE LIST” on Page 22.)
4:3 PS (Panscan):
8. Press the 4 button to skip back to the setup screen (or press the
SETUP button to quit the setup screen).
SelectwhenaconventionalTVsetisconnected.
Whenthewidescreendiscisplayed, itdisplays
pictures cropped to fill your TV screen. The left
and right edges are cut off.
Note:
-
You cannot switch audio sound track languages if there is only one
language recorded on the disc.
Cut off
16:9 :
-
When you play a DVD disc, the unit automatically displays the pre-
selected subtitle language if it is included on the disc.
SelectwhenawidescreenTVsetisconnected.
Played in “FULL” size. (Setting the wide screen
TV to “FULL” mode is also necessary.)
For improvement, on-screen displays subject to change without
notice.
Note:
-
-
The screen size may differ depending on the DVD discs.
If you select “16:9” to get rid of the black bands on screen when wide
screen disc is played, picture may be slightly distorted.
In some discs, even if “4:3 PS” is selected, the black bands may
remain on the screen.
-
NTSC Disc:
Select the video output signal format to “PAL 60” or “NTSC” when playing
back the NTSC discs.
20
Download from Www.Somanuals.com. All Manuals Search And Download.
Setting audio
Setting parental
Thesoundfromspeakerscanreachthelisteningpositionatdifferenttimes
depending on the speaker placements. You can allow for this difference
by changing the delay time of the centre and surround speakers.
You also can change the dynamic range control (DRC).
1. PresstheSETUPbuttoninthestopmode. Thesetupscreenappears.
1. PresstheSETUPbuttoninthestopmode. Thesetupscreenappears.
Language
Display
Audio
Parental
2. Press the a (Directional arrow) button to select “Parental”, then press
the ENTER button. “Parental” screen appears.
Language
Display
Audio
Parental
Language
Display
Audio
Parental
2. Pressthea (Directionalarrow)buttontoselect“Audio”,thenpressthe
ENTER button. “Audio” screen appears.
Example:
Password
Level
----
Off
Audio DRC
Center Delay
Surr. Delay
Off
0ms
5ms
3. Press the 5 button to skip “Password: ----” and select “Level”.
Password
Level
----
Off
3. Press the ENTER button to select “Audio DRC”. The submenu
appears.
4. Press the 5 or 4 button to select “On” or “Off” as desired.
On:It will compress the dynamic range. It may have no effect with
some discs.
4. Press the ENTER button repeatedly to select the parental lock level
(“Level: Off, 1 ~ 8”).
Example: To set “Level 1”
Off:Sound with a wide dynamic range.
5. Press the ENTER button. “Audio DRC: On” or “Audio DRC: Off”
remains.
6. Press the 5 button to select “Center Delay”, then press the ENTER
button. The submenu appears.
Password
Level
----
1
5. Press the 4 button to return to “Password: ----”.
6. Enter a number in 4 digits.
7. Press the 5 or 4 button to select the centre speaker delay time.
Centre speaker delay time
If D1 D2, set the delay time to “0ms”.
Password
Level
****
1
If D1>D2, set the delay time as follows:
Difference between D1 and D2
Approx. 30cm
Note:
Delay time
1ms
2ms
If you make a mistake, press the CLEAR button.
7. Press the ENTER button. The password is now set.
Approx. 60cm
Approx. 90cm
Approx. 120cm
Approx. 150cm
3ms
4ms
5ms
----
1
Password
Level
Note:
If you do not set it, Parental control does not work, and it returns to the
initial settings.
Centre speaker
8. Press the SETUP button. The setup screen disappears.
Front left speaker
Front right speaker
Parental control
D2
D1
D1
MPAA (Motion Picture Association of America) guideline is a rating
system that provides advanced cautionary information to parents about
the content of movie programmes.
The parental lock level is equivalent to the following MPAA rating system.
Level 7: NC-17 (No one 17 and under admitted)
Level 6: R (Restricted)
D3
D3
Level 4: PG-13 (Parents strongly cautioned)
Level 3: PG (Parental guidance suggested)
Level 1: G (General audiences)
Surround left
speaker
Surround right
speaker
Some DVD discs contain a restriction level which enables parents to
prevent playback of discs by children. This unit is equipped with a
password designed to prevent children changing the level.
8. Press the ENTER button. “Center Delay” and the selected delay time
remain.
9. Press the 5 button to select “Surr. Delay”, then press the ENTER
button. The submenu appears.
YoucannotplayDVDdiscsratedhigherthanthelevelyouselectedunless
you cancel the parental lock function.
10. Press the 5 or 4 button to select the surround speaker delay time.
For example, when you select level “5”, the unit will not play discs with
ratings of “6”, “7” or “8”. The information will appear on the TV screen.
Surround speaker delay time
If D1 D3, set the delay time to “0ms”.
If you forget the password…
If D1>D3, set the delay time as follows:
Enter“788444”evenif4digits“----”appears,thenpresstheENTERbutton
to clear the current password. Enter a new password and set the parental
lock level again.
Difference between D1 and D3
Approx. 150cm
Delay time
5ms
Approx. 300cm
10ms
Approx. 450cm
15ms
Note:
DVD discs may or may not respond to the parental lock settings. Make
sure this function works with your DVD discs.
11. Press the ENTER button. “Surr. Delay” and the selected delay time
remain.
12. Press the 4 button to skip back to the setup screen (or press the
SETUP button).
21
Download from Www.Somanuals.com. All Manuals Search And Download.
LANGUAGE CODE LIST
Enter the appropriate code number for the initial settings “Audio”, “Subtitle” and “DVD Menu”.
Abbreviation of
the language
Abbreviation of
the language
Abbreviation of
the language
Code
Language
Code
Language
Code
Language
6565
6566
6570
6577
6582
6583
6589
6590
6665
6669
6671
6672
6673
6678
6679
6682
6765
6779
6783
6789
6865
6869
6890
6976
6978
6979
6983
6984
6985
7065
7073
7074
7079
7082
7089
7165
7168
7176
7178
7185
7265
7273
7282
7285
7289
7365
aa
ab
af
am
ar
as
ay
az
ba
be
bg
bh
bi
Afar
7369
7375
7378
7383
7384
7387
7465
7473
7487
7565
7575
7576
7577
7578
7579
7583
7585
7589
7665
7678
7679
7684
7686
7771
7773
7775
7776
7778
7779
7782
7783
7784
7789
7865
7869
7876
7879
7967
7977
7982
8065
8076
8083
8084
8185
8277
ie
ik
in
is
it
iw
ja
Interlingue
Inupiak
Indonesian
Icelandic
Italian
Hebrew
Japanese
Yiddish
Javanese
Georgian
Kazakh
Greenlandic
Cambodian
Kannada
Korean
Kashmiri
Kurdish
Kirghiz
8278
8279
8285
8287
8365
8368
8371
8372
8373
8375
8376
8377
8378
8379
8381
8382
8383
8384
8385
8386
8387
8465
8469
8471
8472
8473
8475
8476
8478
8479
8482
8483
8484
8487
8575
8582
8590
8673
8679
8779
8872
8979
9072
9085
rn
ro
ru
rw
sa
sd
sg
sh
si
Kirundi
Abkhazian
Afrikaans
Amharic
Arabic
Assamese
Aymara
Azerbaijani
Bashkir
Byelorussian
Bulgarian
Bihari
Bislama
Bengali; Bangla
Tibetan
Breton
Catalan
Corsican
Czech
Romanian
Russian
Kinyarwanda
Sanskrit
Sindhi
Sangro
Serbo-Croatian
Singhalese
Slovak
ji
jw
ka
kk
kl
km
kn
ko
ks
ku
ky
la
sk
sl
Slovenian
Samoan
Shona
sm
sn
so
sq
sr
ss
st
su
sv
sw
ta
te
tg
th
ti
tk
tl
tn
to
bn
bo
br
Somali
Albanian
Serbian
Siswati
Sesotho
Sundanese
Swedish
Swahili
Tamil
ca
co
cs
cy
da
de
dz
el
en
eo
es
et
eu
fa
fi
fj
fo
Latin
Lingala
Welsh
Danish
German
Bhutani
Greek
ln
lo
lt
lv
Laothian
Lithuanian
Latvian, Lettish
Malagasy
Maori
Macedonian
Malayalam
Mongolian
Moldavian
Marathi
Malay
Maltese
Burmese
Nauru
Nepali
Telugu
Tajik
Thai
mg
mi
mk
ml
mn
mo
mr
ms
mt
my
na
ne
nl
no
oc
om
or
pa
pl
English
Esperanto
Spanish
Estonian
Basque
Persian
Finnish
Fiji
Faeroese
French
Tigrinya
Turkmen
Tagalog
Setswana
Tonga
Turkish
Tsonga
Tatar
tr
ts
tt
fr
fy
tw
uk
ur
uz
vi
vo
wo
xh
yo
zh
zu
Twi
Ukrainian
Urdu
Frisian
Irish
ga
gd
gl
gn
gu
ha
hi
Dutch
Norwegian
Occitan
(Afan) Oromo
Oriya
Punjabi
Scots Gaelic
Galician
Guarani
Gujarati
Hausa
Uzbek
Vietnamese
Volapük
Wolof
Xhosa
Hindi
Polish
Yoruba
Chinese
Zulu
hr
Croatian
Hungarian
Armenian
Interlingua
ps
pt
qu
rm
Pashto, Pushto
Portuguese
Quechua
Rhaeto-Romance
hu
hy
ia
LISTENING TO OTHER SOURCES
Listening to the TV connected to the AV EURO/TV (AUDIO) IN (RGB
ListeningtothevideoequipmentconnectedtotheVIDEO(AUDIO)IN
OUT) socket
sockets
1. Press the FUNCTION button to select “TV”.
2. Follow the instructions supplied with the TV.
1. Press the FUNCTION button to select “VIDEO”.
2. Follow the instructions supplied with the video equipment.
22
Download from Www.Somanuals.com. All Manuals Search And Download.
LISTENING TO THE RADIO
Listening to preset stations
To turn the unit on and listen to the last received station, press the
1. Press the TUNE/BAND button to select FM or AM.
2. Press the PRESET “+” or “–” button briefly to select the desired
channel.
TUNE/BAND button.
Automatic/Manual tuning
1. Press the TUNE/BAND button to select FM or AM.
2. Automatic tuning
-
The number button(s) can also be used. Example: Press 9 then
ENTER.
Press the TUNE/PTY “+” or “–” button for at least 1 second to tune in
a station. The unit will scan up or down the band and receive the next
receivable station. Press the button again to continue.
Manual tuning
PresstheTUNE/PTY“+”or“–”buttonbrieflyuntilthedesiredfrequency
is displayed.
Preset scan tuning
1. Press the TUNE/BAND button to select FM or AM.
2. PressthePRESET“+”(e)buttonforatleast1second. Thechannel
number appears. Each of the preset stations is tuned in for 5 seconds.
3. When the desired station has been tuned in, press the PRESET “+”
(e) button again to keep the reception locked at that station.
When beat interference is heard
ST
A high-pitched noise called “beat” is sometimes heard during reception of
radio broadcasts. If this occurs,
To preset stations
Whilepressingthen buttononthemainunit, presstheTESTbuttononthe
remote control to select “bc-A” or “bc-B”. Select the setting that gives the
best results.
Up to 24 FM and 12 AM stations can be preset.
Automatic presetting (APT)
1. Press the TUNE/BAND button to select FM or AM.
2. Press the PROGRAM/RANDOM button for at least 3 seconds. “PGM”
blinks.
The automatic tuning mode is set and automatic presetting begins
from the low end of the band.
When 24 FM or 12 AM stations have been preset or the high end of
the band is reached, automatic presetting stops. “PGM” disappears
and the station memorized on channel 1 will be heard.
3. To preset stations on the other band, follow steps above.
To receive FM stereo broadcasts
Make sure that “MONO” is not displayed. If “MONO” appears, press the
SHIFT + RDS buttons to turn the “MONO” indication off.
“ST” appears when an FM stereo broadcast is received.
-
If the signal from an FM stereo station is weak and reception is poor,
press the SHIFT + RDS buttons to change to the MONO mode. The
reception may be improved, but the sound will be monaural.
Changing the AM reception frequencies
Note:
It is not necessary to perform this procedure in the Europe.
1. Press the TUNE/BAND button to select “AM”.
2. Whilepressingthenbuttononthemainunit,pressthePROGRAM/
RANDOM button on the remote control.
If APT is activated, all previously programmed stations of the band will be
cleared and new stations will be programmed.
Manual presetting
1. Tune in the station to be preset as described in “Automatic/Manual
tuning”.
522 - 1611 kHz (9 kHz steps)
wv 520 - 1610 kHz (10 kHz steps)
2. Press the PROGRAM/RANDOM button.
Listening to FM stations with RDS
RDS (Radio Data System) permits FM stations to send additional signals
with the regular programme signals. For example, the stations send their
stationnamesandinformationaboutwhattypeofbroadcastprogrammes,
such as sports or music, etc.
PGM
ST
3. While “PGM” is blinking, press the PRESET “+” or “–” button to select
the channel to be preset.
When tuned in FM broadcast which provides the RDS service, the “PS”
RDS mode is set automatically and the station name appears on the
display.
-
The number button(s) can also be used. Example: Press 9.
PGM
ST
Note:
4. While “PGM” is blinking, press the ENTER button.
-
-
-
Some FM broadcasts do not provide RDS service.
RDS may not work correctly if the signal strength is weak.
RDS is not available for AM broadcasts.
-
Inthisexample, “103.25MHz”FMstationispresetonFMchannel
9.
PGM
Selecting the RDS mode
ST
Press the RDS button while listening to an FM station. Each time the
button is pressed, the display mode changes as follows.
PS v PTY v RT v Frequency
PS (Programme Service)
ST
The station name is displayed. If no PS signal is received, “NO PS”
appears, then station frequency is displayed.
PTY (Programme Type)
5. Repeat steps above to add more preset stations.
The broadcast programme type is displayed. If no PTY signal is
received, “NO PTY” appears, then station name or station frequency
is displayed.
-
When presetting a new station, the previous preset station is cleared.
RT (Radio Text)
Text messages the station sends will be displayed. If no RT signal is
received, “NO RT” appears.
Frequency
Station frequency (non-RDS service)
After several seconds, the PS mode returns if RDS signal is received.
23
Download from Www.Somanuals.com. All Manuals Search And Download.
To search a preset station by PTY codes
A particular programme type broadcast can be located by specifying the
PTY codes.
3. Press the PTY CHK (e) button within 10 seconds.
The unit searches 24 preset stations and stops when it finds a
broadcast of the PTY code you have selected, then tunes into that
station.
1. Press the RDS button to select “PTY” while listening to an FM
broadcast.
2. Press the TUNE/PTY “+” or “–” button within 2 seconds to select the
desired PTY code. The PTY code changes as shown below;
-
-
Tocontinuesearchingafterthefirststop, repeatsteps1-3above.
If no broadcast is found, the original station is heard.
To cancel searching, press the n button.
NEWS
CULTURE
v
AFFAIRS
SCIENCE
CLASSICS
SOCIAL
JAZZ COUNTRY
DOCUMENT TEST ALARM
(or in the reverse sequence)
v
INFO
VARIED
OTHER M
RELIGION
NATION M
v
SPORT
v
EDUCATE
v
DRAMA
EASY M
FINANCE
TRAVEL
OLDIES FOLK M
v
v
v
v
POP M
v
ROCK M
v
v
v
LIGHT M
CHILDREN
v
v
v
WEATHER
PHONE IN
v
v
v
v
v
v
LEISURE
v
v
v
v
v
v
v
v
SLEEP TIMER OPERATION
The sleep timer automatically switches off the power after a preset time
has elapsed. The volume will gradually be reduced (fade-out) during the
1-minute period before the unit turns off. There are 4 time periods
available: 30, 60, 90 and 120 minutes.
To check the remaining sleep time
Press the SHIFT + 6 SLEEP buttons once. After several seconds, the
original display returns.
To release the sleep timer while in operation
PresstheSHIFT+6SLEEPbuttonsrepeatedlytoselectthedesiredsleep
time. “SLEEP” and the selected time blink on the display. After several
seconds, the original display returns and the brightness of the display
reduces. “SLEEP” blinks.
Press the SHIFT + 6 SLEEP buttons until “SLEEPOFF” appears. The
timer is also released if the power is switched off.
MAINTENANCE
Cleaning the unit
Clean the outside of the unit with a clean soft cloth moistened with lukewarm water. Do not use benzene, thinner or alcohol since they will mar the finish
of the surfaces.
24
Download from Www.Somanuals.com. All Manuals Search And Download.
TROUBLESHOOTING GUIDE
If you have followed the instructions and are having difficulty operation the unit, locate the SYMPTOM in the left column below. Check the corresponding
POSSIBLE CAUSE and CORRECTIVE ACTION columns to locate and remedy the problem.
SYMPTOM
POSSIBLE CAUSE
The wrong function is selected.
CORRECTIVE ACTION
Select the correct function.
No picture.
No sound.
No disc is loaded or an unplayable disc is loaded.
Load a disc or load a playable disc. (Check the disc
logo, type, colour system and regional code.)
The TV is not set to receive signal from the unit.
The wrong function is selected.
Select the correct input function on the TV.
Select the correct function.
Volume control is set to minimum.
An unplayable disc is loaded.
Turn up the volume.
The playback picture is poor.
Load a playable disc. (Check the disc logo, type,
colour system and regional code.)
“
” appears on the TV screen.
The selected function does not operate on the disc
now.
The feature or action cannot be completed at this time
because:
-
-
-
The feature is not available at the moment.
The DVD software restricts it.
The DVD software does not support the feature
(e.g., angles).
The unit does not start play.
No disc is loaded.
Load a disc.
An unplayable disc is loaded.
Load a playable disc. (Check the disc logo, type,
colour system and regional code.)
The disc is loaded with the label side down.
The disc is dirty.
Load the disc on the disc tray correctly.
Clean the disc or replace it.
“Parental” is set.
Cancel the parental lock function or change the
rating level. Reset it after play.
The operation or display is not normal. The memory must be reset.
1. Disconnect the mains lead.
2. Reconnect the mains lead.
3. Resume operation.
The remote control does not work
properly.
The batteries in the remote control are weak, or
installed incorrectly.
Check the battery polarity (+ or –).
Replace the batteries.
The remote control is not aimed at the remote
sensor window.
Aim the remote control at the remote sensor
window.
25
Download from Www.Somanuals.com. All Manuals Search And Download.
SPECIFICATIONS
Amplifier
Main amplifier
Stereo mode
Tuner
Reception frequency:
FM: 87.5 - 108 MHz
AM: 522 - 1611 kHz
33 W x 2 (at 8 ohms, 10% distortion)
Dolby Digital mode
33 W x 2 (at 8 ohms, 10% distortion, with Centre/Surround/
Subwoofer amplifier off)
Centre amplifier
33 W (at 8 ohms, 10% distortion, with Main/Surround/Subwoofer
amplifier off)
Surround amplifier
33 W x 2 (at 8 ohms, 10% distortion, with Main/Centre/Subwoofer
amplifier off)
Subwoofer amplifier
General
Power requirements:
AC 230 V, 50 Hz
Power consumption:
120 W
1.5 W (standby mode)
Dimensions:
435(W) x 65(H) x 378(D) mm
Weight:
6.3 kg
55 W (at 4 ohms, 10% distortion, with Main/Centre/Surround
amplifier off)
Speaker system
Input:
Front left, Front right, Centre, Surround left and Surround right
VIDEO (AUDIO) IN: 500 mV/50 kΩ
Input/Output:
AV EURO/TV (AUDIO) IN (RGB OUT): For Euro-AV/Scart lead
Outputs:
speakers (SX-TS760S, magnetic shield)
Unit used:
8 cm cone type, full range
Maximum power handling capacity:
50 W (peak)
Nominal impedance:
8 Ω
Dimensions:
SPEAKERS:
FRONT (L/R): 8 Ω
CENTER: 8 Ω
SURROUND (L/R): 8 Ω
SUBWOOFER: 4 Ω
MONITOR OUT:
125(W) x 105(H) x 112(D) mm
Weight:
S-VIDEO:
0.72 kg/speaker
Y: 1.0 Vp-p (75 Ω)
C: 0.3 Vp-p (75 Ω) PAL, 0.286 Vp-p (75 Ω) NTSC
VIDEO: 1.0 Vp-p (75 Ω)
Subwoofer (SX-TS760W)
Unit used:
13 cm cone type
Maximum power handling capacity:
80 W (peak)
Nominal impedance:
4 Ω
Dimensions:
DVD Player
Type:
DVD video player
Playback standard:
PAL or NTSC
Laser:
170(W) x 412(H) x 310(D) mm
Weight:
Semiconductor laser, wavelength: 650/790 nm
Laser output (Continuous wave max.):
1 mW (DVD)
4.6 kg
0.5 mW (CD)
IMPORTANT INFORMATION
Signal to noise ratio:
More than 105 dB
Wow and flutter:
Because its products are subject to continuous improvement, SANYO
reserves the right to modify product designs and specifications without
notice and without incurring any obligation.
Below measurable level
26
Download from Www.Somanuals.com. All Manuals Search And Download.
GUARANTEE TO CUSTOMER
Thank you for buying Sanyo. This equipment should give you
many years of pleasure and faithful service but in the event that a
fault occurs, the following notes for your guidance may be helpful:-
Sanyo Europe Ltd. (the Company) guarantees to the initial retail
purchaser that if this equipment is or becomes defective and that,
in the opinion of the Company, the defect is due to faulty material
or workmanship the Company will, for a period of 12 calendar
months from the date of sale to the original purchaser repair or
replace, at its sole option, free of charge, any such defective
component part of the equipment, always provided that: -
1. PLEASE RETAIN YOUR PURCHASE RECEIPT WHICH WILL
BE REQUIRED FOR SERVICE DURING GUARANTEE.
2. If your Sanyo equipment proves faulty during the period of
guarantee, take it or send it back to the dealer who originally
supplied it together with this guarantee and the proof of purchase.
We have made arrangements with our approved dealers under
which they will carry out in-guarantee service repairs on our behalf.
In this way, we hope to reduce to a minimum the amount of time
you will be without your equipment.
3. If for some reason it is impossible to return the equipment to the
original supplies, please contact our Consumer Relations Depart-
ment at the address below for further advice.
4. Should the equipment require servicing after the expiry of the
guarantee period, take or send it to the original supplier or any
other Sanyo dealer. He will be pleased to give you a quotation for
the repair. If you are in any doubt about what to do, write to us at
the address below or telephone:
1. The equipment has at all times been used in accordance with
the operating instructions issued by the Company, and has not
been connected to an electrical mains supply for which it has not
been adjusted.
2. Accidental damage, or damage caused by negligence or
misuse by the user, including leakage from exhausted batteries, is
specifically excluded.
3. Unauthorised repairs, or any modification to the equipment
which has not been expressly approved by the Company, shall
render this guarantee null and void.
4. Failure due to fair wear and tear of any item, such as batteries,
record playing styli, and tape recording, playback and erase heads
is specifically excluded.
Consumer Relations Department,
Sanyo Europe Ltd.,
Sanyo House
Otterspool Way, Watford,
Hertfordshire WD2 8JX
Tel: Watford 246363
This guarantee is not transferable and is only applicable within the
United Kingdom (and the Republic of Ireland). Nothing in this
express guarantee affects the statutory rights available to the
purchaser of this equipment.
Note:
This guarantee supersedes any other form of guarantee
that may inadvertently have been enclosed with or attached to the
product. (August 1978).
R5
(UK) 1AD6P1P1839-BA
SANYO Electric Co., Ltd.
Download from Www.Somanuals.com. All Manuals Search And Download.
|