Assembly Instructions for Model: EFB
Assemble your Sanus Systems Model EFSat, or HTB Speaker Foundation,
attaching the L-Bracket. You will need the EFB Universal Mounting Bracket (sold
separately) to mount the speakers.
Use a Phillips screwdriver to remove the two plastic wall spacers that are on the
back of your speaker, located just above the speaker terminal
plate.
Pull the speaker wires through the wire management and
connect them to your speaker; then, lay the speaker down with
the back facing up.
Speaker
Wires
Open the EFB Package and remove the small Black Spacers and place them over
the holes in the back of your speaker where the two plastic wall spacers were
removed.
Align the top two slots of the EFB over the two small Black Spacers.
Using a Phillips screwdriver, and the two Screws provided with the EFB, secure the
EFB and Spacers to the speaker, taking care as to not overtighten the screws.
Spacers
EFB
Screws
Slide the Speaker and EFB onto the L-Bracket on the stand.
EFB
Speaker
L-Bracket
Sanus Systems 2221 Hwy 36 West, Saint Paul, MN 55113 2.03.06 (100007)
Download from Www.Somanuals.com. All Manuals Search And Download.
|
Radica Games Games CUBE WORLD STICK PEOPLE STICKING TOGETHER Instruction Manual User Guide
Radio Shack Clock Radio CHRONOMATIC 312 User Guide
Remington Styling Iron S 1009at User Guide
Renesas Network Card R5H30101 User Guide
Ricoh Camcorder PV C880A User Guide
Roadmaster Car Stereo System VRCD220S User Guide
Rosewill Computer Keyboard RK600 User Guide
Samson Stereo Amplifier GT408 User Guide
Sanitaire Vacuum Cleaner SC9180A User Guide
Seidio GPS Receiver G2350 User Guide