Sansui Refrigerator HDLCD2600 User Guide

R
OWNER’S MANUAL  
26" WIDE TFT LCD TELEVISION  
WITH DIGITAL TUNER  
HDLCD2600  
ATTENTION  
If you purchase a universal remote control from your local retailer, please contact the remote  
manufacturer for the required programming code.  
Air/Cable MODE SELECTION  
When shipped from the factory, the Tuning Band menu option is set to the “Cable” (Cable Television)  
mode. If not using Cable TV, set this menu option to the “Air” position.  
IF CONTACT WITH CUSTOMER SERVICE IS REQUIRED  
PLEASE HAVE THE MODEL NUMBER READY PRIOR TO THE CALL  
CUSTOMER SERVICE – 1-800-289-0980  
ORION WEBSITE  
FOR INFORMATION ON OUR OTHER PRODUCTS, PLEASE VISIT OUR WEBSITE AT  
Before operating the unit, please read this manual thoroughly.  
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
1) Read these instructions.  
2) Keep these instructions.  
3) Heed all warnings.  
4) Follow all instructions.  
5) Do not use this apparatus near water.  
6) Clean only with a clean dry cloth.  
7) Do not block any ventilation openings. Install in accordance with the manufacturer's instructions.  
8) Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including  
amplifiers) that produce heat.  
9) Do not defeat the safety purpose of the polarized or grounding-type plug. A polarized plug has two blades  
with one wider than the other. A grounding type plug has two blades and a third grounding prong. The wide  
blade and the third prong are provided for your safety. If the provided plug does not fit into your outlet,  
consult an electrician to replace the obsolete receptacle.  
10) Protect the power cord from being walked on or pinched particularly at plug, and the point where it exits  
from the apparatus.  
11) Only use attachments/accessories specified by the manufacturer.  
12) Use only with the cart, stand, tripod, bracket, or table specified by the  
PORTABLE CART WARNING  
(symbol provided by RETAC)  
manufacturer, or sold with the apparatus. When a cart is used, use caution  
when moving the cart/apparatus combination to avoid injury from tip-over.  
13) Unplug this apparatus during lightning storms or when unused for long  
periods of time.  
14) Refer all servicing to qualified service personnel. Servicing is required when  
the apparatus has been damaged in any way, such as power-supply cord or  
S3126A  
plug damage, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been  
exposed to rain or moisture, does not operate normally, or has been dropped.  
15) Apparatus should not be exposed to dripping or splashing, and objects filled with liquids, such a vases,  
should not be placed on the apparatus.  
16) An outside antenna system should not be located in the vicinity of overhead power lines or other electric  
light or power circuits, or where it can fall into such power lines or circuits. When installing an outside  
antenna system, extreme care should be taken to keep from touching such power lines or circuits, as  
contact with them might be fatal.  
17) Do not overload wall outlets and extension cords, as this can result in a risk of fire or electric shock.  
18) Do not push objects through any openings in this unit, as they may touch dangerous voltage points or short  
out parts that could result in fire or electric shock. Never spill or spray any type of liquid into the unit.  
3
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
19) If an outside antenna or cable system is connected to the unit, be sure the antenna or cable system is  
grounded to provide some protection against voltage surges and built-up static charges, Section 810 of the  
National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast  
and supporting structure, grounding of the lead-in wire to an antenna discharge unit, size of grounding  
conductors, location of antenna discharge unit, connection to grounding electrodes, and requirements for  
the grounding electrode.  
EXAMPLE OF ANTENNA GROUNDING AS PER THE  
NATIONAL ELECTRICAL CODE  
ANTENNA LEAD  
IN WIRE  
GROUND  
CLAMP  
ANTENNA  
DISCHARGE UNIT  
(NEC SECTION 810-20)  
GROUNDING CONDUCTORS  
ELECTRIC SERVICE  
(NEC SECTION 810-21)  
EQUIPMENT  
GROUND CLAMPS  
POWER SERVICE GROUNDING  
ELECTRODE SYSTEM  
(NEC ART 250, PART H)  
NEC-NATIONAL ELECTRICAL CODE  
S2898A  
20) When replacement parts are required, be sure the service technician uses replacement parts specified by  
the manufacturer or those that have the same characteristics as the original part.  
Unauthorized substitutions may result in fire, electric shock or other hazards.  
21) Upon completion of any service or repairs to this unit, ask the service technician to perform safety checks to  
determine that the unit is in proper operating condition.  
22) When you connect the product to other equipment, turn off the power and unplug all of the equipment from  
the wall outlet. Failure to do so may cause an electric shock and serious personal injury. Read the owner's  
manual of the other equipment carefully and follow the instructions when making any connections.  
23) Reduce the volume to the minimum level before you turn on the product. Otherwise, sudden high volume  
sound may cause hearing or speaker damage.  
24) Do not allow the product to output distorted sound for an extended period of time. It may cause speaker  
overheating and fire.  
25) This reminder is provided to call the cable TV system installer’s attention to Article 820-40 of the NEC that  
provides guidelines for proper grounding and, in particular, specifies that the cable ground shall be con-  
nected to the grounding system of the building, as close to the point of cable entry as practical.  
4
Download from Www.Somanuals.com. All Manuals Search And Download.  
IMPORTANT SAFETY INSTRUCTIONS  
CONDENSATION  
Moisture will form in the operating section of the player if the player is brought from cool surroundings into a warm room or if  
the temperature of the room rises suddenly. When this happens, player's performance will be impaired. To prevent this, let the  
player stand in its new surroundings for about an hour before switching it on, or make sure that the room temperature rises  
gradually.  
Condensation may also form during the summer if the player is exposed to the breeze from an air conditioner. In such cases,  
change the location of the player.  
HOW TO HANDLE THE LCD PANEL  
• Do not press hard or jolt the LCD panel. It may cause the LCD panel glass to break and injury may occur.  
• If the LCD panel is broken, make absolutely sure that you do not touch the liquid in the panel. This may cause skin  
inflammation.  
If the liquid gets in your mouth, immediately gargle and consult with your doctor. Also, if the liquid gets in your eyes or  
touches your skin, consult with your doctor after rinsing for at least 15 minutes or longer in clean water.  
Possible Adverse Effects on LCD Panel: If a fixed (non-moving) pattern remains on the LCD Panel for long periods of time,  
the image can become permanently engrained in the LCD Panel and cause subtle but permanent ghost images. This type of  
damage is NOT COVERED BY YOUR WARRANTY. Never leave your LCD Panel on for long periods of time while it is  
displaying the following formats or images:  
• Fixed Images, such as stock tickers, video game patterns, TV station logos, and websites.  
• Special Formats that do not use the entire screen. For example, viewing letterbox style (16:9) media on a normal (4:3)  
display (black bars at top and bottom of screen); or viewing normal style (4:3) media on a widescreen (16:9) display (black  
bars on left and right sides of screen).  
The following symptoms are not signs of malfunction but technical limitation.Therefore we disclaim any responsibility  
for these symptoms.  
• LCD Panels are manufactured using an extremely high level of precision technology, however sometimes parts of the  
screen may be missing picture elements or have luminous spots.  
This is not a sign of a malfunction.  
• Do not install the LCD Panel near electronic equipment that is susceptible to electromagnetic waves. Some equipment  
placed too near this unit may cause interference.  
• Effect on infrared devices – There may be interference while using infrared devices such as infrared cordless headphones.  
SAFETY PRECAUTIONS  
The unit emits heat when in operation. Do not place any covers or blankets on the unit, this may cause overheating.  
Do not block ventilation holes, or set up near radiators. Do not place in direct sunshine. When placing on a shelf leave 10 cm  
(4 inches) free space around the entire unit.  
10cm  
Notes when mounting the LCD TV on a wall  
• When installing the unit on a wall, allow at least 6 cm (2 1/2 inches) clearance between the rear of the LCD TV and the wall.  
Clearance of less than 6 cm (2 1/2 inches) will obstruct the vents and may cause the interior of the unit to overheat,  
resulting in damage to the unit.  
• If the unit is to be mounted on the wall, contact the retailer where you purchased the LCD TV for advice, and have the  
equipment professionally installed. Incomplete or improper installation may cause injury to you, and/or damage to the LCD  
TV.  
• Bracket holes: To attach a wall mounting bracket (not supplied) remove the screws and attached where indicated in the  
drawing below.  
Bracket holes  
5
Download from Www.Somanuals.com. All Manuals Search And Download.  
Contents  
PREPARATIONS  
IMPORTANT SAFETY INSTRUCTIONS....................................... 3  
SAFETY PRECAUTIONS ............................................................. 5  
Contents........................................................................................ 6  
Features ........................................................................................ 7  
Power source ................................................................................ 7  
Parts and functions ....................................................................... 8  
Remote control .............................................................................. 9  
Antenna connections................................................................... 10  
Cable TV connections ................................................................. 11  
Connections to other equipment ................................................. 12  
Setting the language ................................................................... 17  
OPERATION  
Memorizing channels .................................................................. 18  
TV operation................................................................................21  
Labeling channels ....................................................................... 24  
Setting the V-Chip ....................................................................... 25  
Closed Caption............................................................................ 29  
CC advanced .............................................................................. 30  
Setting the picture size................................................................ 31  
Adjusting the picture preference ................................................. 33  
Picture control adjustment........................................................... 33  
DNR ............................................................................................34  
Selecting the color temperature .................................................. 34  
Setting the 3D Y/C ...................................................................... 35  
Selecting Stereo/Second Audio Program (SAP) ......................... 36  
Sound control adjustment ........................................................... 36  
Selecting the audio language...................................................... 37  
Selecting the digital output .......................................................... 37  
Checking the Digital-signal strength............................................ 38  
Resetting your settings................................................................ 38  
Picture control adjustment in the Component and PC mode ...... 39  
OTHERS  
Reception disturbances............................................................... 40  
Troubleshooting .......................................................................... 41  
Specifications .............................................................................. 42  
LIMITED WARRANTY ................................................................ 43  
6
Download from Www.Somanuals.com. All Manuals Search And Download.  
Features  
Integrated Digital Tuner - You can view digital broadcasts without using a Digital TV Set-Top Box.  
Closed Caption Decoder With Full Text Mode - Displays text captions or full screen text on the screen for  
hearing impaired viewers.  
Picture Adjustments Using The Remote Control - The On-Screen display allows precise remote control  
adjustment of BRIGHTNESS, CONTRAST, COLOR, TINT and SHARPNESS.  
Programmable TV Sleep Timer - Operable from the remote control, the LCD TV can be programmed for up  
to 240 minutes to turn off automatically.  
V-Chip - The V-Chip function can read the rating of a broadcast program or movie content if the program is  
encoded with this information. V-chip will allow you to set a restriction level.  
Digital Audio Jack (Coaxial) - When a component with a built-in Dolby Digital decoder is connected, Dolby  
Digital sound can produce the effect of being in a movie theater or a concert hall.  
S-Video/Component Video Jacks - A VCR, DVD player, satellite receiver or other audio/video component  
can be connected to this unit.  
Video Input Jacks - This unit is equipped with 3 types of video input jacks. The component video in jacks and  
S-video in jack enable you to watch the DVD player or the video devices with high quality picture.  
On-Screen 3 Language Display - You can select one of 3 languages, English, Spanish or French for on-  
screen programming.  
* Manufactured under license from Dolby Laboratories. “Dolby” and the double-D symbol are trademarks of  
Dolby Laboratories.  
Power source  
TO USE AC POWER  
1. Connect the AC cord plug into this unit's AC INPUT jack.  
2. Connect the AC cord into an AC outlet.  
AC Outlet  
Wider Hole  
and Blade  
AC 120V, 60Hz  
AC cord (supplied)  
NOTE:  
• Please make sure to insert the cord securely at both the LCD TV and the wall outlet.  
• The AC cord has a grounding-type AC line plug. If the supplied AC cord does not match your AC outlet,  
contact a qualified electrician, do not defeat the purpose of a grounding plug.  
WARNING:  
• DO NOT CONNECT THIS UNIT TO THE POWER USING ANY DEVICE OTHER THAN THE SUPPLIED AC  
CORD. THIS COULD CAUSE FIRE, ELECTRICAL SHOCK, OR DAMAGE.  
• DO NOT USE WITH A VOLTAGE OTHER THAN THE POWER VOLTAGE DISPLAYED. THIS COULD  
CAUSE FIRE, ELECTRICAL SHOCK, OR DAMAGE.  
CAUTION:  
• WHEN THIS UNIT IS NOT USED FOR A LONG TIME, (E.G., AWAY ON A TRIP) IN THE INTEREST OF  
SAFETY, BE SURE TO UNPLUG IT FROM THE AC OUTLET.  
• DO NOT PLUG/UNPLUG THE PLUG WHEN YOUR HANDS ARE WET. THIS MAY CAUSE ELECTRICAL  
SHOCK.  
• IF YOU NEED TO REPLACE THE SUPPLIED AC ADAPTER OR AC CORD, THE SPECIFIED ONE IS  
RECOMMENDED. CONTACT CUSTOMER SERVICE AT 1-800-289-0980.  
7
Download from Www.Somanuals.com. All Manuals Search And Download.  
Parts and functions  
Front  
Top  
VOLUME  
+/– buttons  
MENU POWER  
button button  
CHANNEL  
INPUT  
C/D buttons button  
Remote sensor  
POWER indicator  
Red: Standby  
Green: On  
(It alternately blinks to red and green while starting. )  
Rear side  
RF (ANT) IN jack  
COAXIAL DIGITAL AUDIO OUT jack  
AV1 IN jacks  
(VIDEO/S-VIDEO/AUDIO (L/R))  
HDMI IN jack  
PC IN jack  
PC/HDMI AUDIO jack  
COMPONENT IN jacks  
AUDIO (L/R) jacks  
(for COMPONENT IN and AV2 VIDEO IN)  
AV2 VIDEO IN jack  
AC INPUT jack  
To display the menu screen.  
Press MENU button to display the menu screen.  
CHANNEL /buttons and VOLUME +/– buttons can be used to select the desired setting during the menu  
screen operations.  
8
Download from Www.Somanuals.com. All Manuals Search And Download.  
Remote control  
6. CH (CHANNEL) + / – / CURSOR / Buttons -  
Used to operate the menu functions of the LCD  
TV, and to change the channels of the LCD TV.  
7. MENU Button - Use to display the On-Screen  
menu function.  
8. MUTE Button - To turn off the sound, press this  
button once. The LCD TV will be silenced and the  
symbol “Mute” will appear on the screen. The  
muting feature can be released by pressing the  
MUTE button again or one of the VOL (VOLUME)  
+ or buttons.  
1
8
2
3
9
10  
4
5
11  
12  
9. DISPLAY Button - When you press this button,  
the current information will be displayed on a  
screen. To remove the display from the screen,  
press this button again.  
10. PICTURE SIZE Button - Used to change the  
picture size.  
13  
14  
6
7
15  
16  
11. INPUT SELECT Button - Use to change the  
external input.  
1. POWER Button - Used to turn the power on/off to  
the LCD TV.  
2. SLEEP Button - To set the LCD TV to turn off after  
a preset amount of time, use the SLEEP button on  
the remote control.  
3. Direct Channel Selection Buttons (0-9) - Allows  
direct access to any channel of the LCD TV.  
4. – Button -This button is the “–” button used when  
selecting digital channels. Also can display the  
current channel number when viewing the program.  
5. RESET Button - Press to reset the On-Screen  
picture adjustments to their factory preset positions.  
To use this function, select “Setup” in the menu  
screen, then press this button.  
12. RECALL Button - This button allows you to go  
back to the previous channel selected by just  
pressing the RECALL button. Press this button  
again to return to the channel you were watching.  
13. CCD Button - Used to set the closed caption “CC  
On”, “CC On Mute” or “CC Off”.  
14. ENTER Button - Use to enter or select  
information for On-Screen operations. Also can  
display the current channel number when viewing  
the program.  
15. VOL (VOLUME) + / – / CURSOR  
/
Buttons -  
Used to operate the menu functions of the LCD  
TV. Press the button to increase, or the  
button to decrease the sound level.  
16. EXIT Button - Press to remove setup menu.  
Before using the remote control, batteries must first be installed.  
HOW TO INSTALL BATTERIES  
1. Open the battery compartment cover.  
Use two “AA” size batteries. The batteries may last  
approximately one year depending on how much the  
remote control is used. For best performance, it is  
recommended that batteries should be replaced on a  
yearly basis, or when the remote operation becomes  
erratic. Do not mix old and new batteries or different  
types.  
BATTERY PRECAUTIONS  
These precautions should be followed when using  
batteries in this device:  
• Use only the size and type of batteries specified.  
• Be sure to follow the correct polarity when installing  
the batteries as indicated in the battery compart-  
ment. Reversed batteries may cause damage to the  
device.  
2. Install two “AA” batteries (supplied).  
• Do not mix different types of batteries together (e.g.  
Alkaline and Carbon-zinc) or old batteries with fresh  
ones.  
• If the device is not to be used for a long period of  
time, remove the batteries to prevent damage or  
injury from possible battery leakage.  
• Do not try to recharge batteries not intended to be  
recharged; they can overheat and rupture. (Follow  
battery manufacturer’s directions.)  
3. Replace the battery compartment cover.  
9
Download from Www.Somanuals.com. All Manuals Search And Download.  
Antenna connections  
Ifyouareusinganindoororoutdoorantenna,followtheinstructionsbelowthatcorrespondtoyourantenna  
system. If you are using a Cable TV service, see page 11 for Cable TV connections.  
Combination VHF/UHF Antenna (Single 75 ohm cable or 300 ohm twin-lead wire)  
Connect the 75 ohm cable from the combination  
VHF/UHF antenna to the antenna jack.  
Antenna  
Jack  
If your combination VHF/UHF antenna has a 300  
ohm twin-lead wire, the use of the 300-75 ohm  
matching transformer may be necessary.  
75 ohm  
Coaxial  
Cable  
Antenna  
Jack  
300-75 ohm  
Matching  
Transformer  
Combination VHF/UHF Antenna (Separate VHF and UHF 300 ohm twin-lead wires)  
Connect the UHF 300 ohm twin-lead wire to the  
Combiner (not supplied). Connect the VHF 300  
ohm twin-lead wire to the 300-75 ohm Matching  
Transformer. Attach the Transformer to the Com-  
300-75 ohm Matching Transformer  
biner, then attach the Combiner to the Antenna  
Jack.  
VHF 300 ohm  
Antenna  
Jack  
UHF 300 ohm  
Combiner  
Separate VHF/UHF Antennas (75 ohm VHF cable and 300 ohm UHF twin-lead wires)  
Connect the VHF 75 ohm cable and UHF 300 ohm  
twin-lead wire to the Combiner (not supplied).  
Attach the Combiner to the Antenna Jack.  
VHF 75 ohm  
Antenna  
Jack  
UHF 300 ohm  
Combiner  
10  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CableTV connections  
This TV has an extended tuning range and can tune most cable channels without using a Cable TV  
Converter box. Some cable companies offer “premium pay channels” where the signal is scrambled.  
Descrambling these signals for normal viewing requires the use of a descrambler device which is  
generally provided by the Cable TV company.  
FOR SUBSCRIBERS TO BASIC CABLE TV SERVICE  
For basic Cable TV service not requiring a Converter/  
Descrambler box, connect the 75 ohm Coaxial Cable directly to  
the Antenna Jack on the back of the TV.  
75 ohm  
Coaxial  
Cable  
Antenna  
Jack  
FOR SUBSCRIBERS TO SCRAMBLED CABLE TV SERVICE  
If you subscribe to a Cable TV service which requires the use of a Converter/Descrambler box, connect the  
incoming 75 ohm Coaxial Cable to the Converter/Descrambler box. Using another 75 ohm Coaxial Cable,  
connect the output jack of the Converter/Descrambler box to the Antenna Jack on the TV. Follow the  
connections shown below. Set the TV to the output channel of the Converter/Descrambler box (usually channel  
3 or 4) and use the Converter/Descrambler box to select channels.  
Incoming  
75 ohm  
Cable TV  
Cable  
Antenna  
Jack  
75 ohm Cable to TV  
Converter/  
Descrambler  
FOR SUBSCRIBERS TO UNSCRAMBLED BASIC CABLE TV SERVICE WITH  
SCRAMBLED PREMIUM CHANNELS  
If you subscribe to a Cable TV service in which basic channels are unscrambled and premium channels require the  
use of a Converter/Descrambler box, you may wish to use a signal Splitter and an A/B Switch box (available from  
the Cable TV company or an electronics supply store). Follow the connections shown below. With the switch in the  
“B” position, you can directly tune any nonscrambled channels on your TV. With the switch in the “A” position, tune  
yourTVtotheoutputoftheConverter/Descramblerbox(usuallychannel3or4)andusetheConverter/Descrambler  
box to tune scrambled channels.  
Incoming  
Converter/  
75 ohm  
Cable TV  
Cable  
Descrambler  
Antenna  
Jack  
75 ohm Cable to TV  
A
A/B Switch  
Splitter  
B
11  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections to other equipment  
The exact arrangement you use to interconnect various video and audio components to the LCD TV is  
dependent on the model and features of each component. Check the Owner's Manual provided with each  
component for the location of video and audio inputs and outputs.  
The connection diagrams below are offered as suggestions.You may need to modify them to accommodate  
your particular assortment of components. The diagrams are intended to show component video and audio  
interconnections only.  
To connect the LCD TV to a VCR  
Left side of the LCD TV  
To AV1 VIDEO/AUDIO (L/R) IN  
Audio/Video cord  
(not supplied)  
or  
To Audio/Video OUT  
To AV2 VIDEO/AUDIO (L/R) IN  
To connect the LCD TV to a VCR with an S-Video cord  
If you connect a VCR with a S-VIDEO cord to the S-VIDEO IN jack on the rear of the LCD TV, you must also  
connect the audio cords to the AV1 AUDIO(L/R) IN jacks on the rear of the LCD TV. The S-VIDEO cord only  
carries the video signal. The audio signal is separate.  
Left side of the LCD TV  
To S-Video OUT  
S-Video cord (not supplied)  
To S-VIDEO IN  
Audio cord (not supplied)  
To Audio OUT  
To AV1 AUDIO (L/R) IN  
NOTE:  
• When the S-video cord and the video cord are connected to each jack at the same time, the S-video cord  
takes precedence over the video cord.  
12  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections to other equipment  
To connect the LCD TV to a DVD player/Satellite receiver  
If your DVD player or Satellite receiver has a S-Video out jack, connect cords as shown.  
Left side of the LCD TV  
To S-Video OUT  
To S-VIDEO IN  
S-Video cord (not supplied)  
Audio cord (not supplied)  
To Audio OUT  
To AV1 AUDIO (L/R) IN  
To connect the LCD TV to a DVD player with component video  
If your DVD player has component video out jacks, connect your LCD TV to a DVD player using a component  
video cord. It can greatly enhance picture quality and performance.  
Left side of the LCD TV  
To COMPONENT IN  
To Component OUT  
Y
P
B
Video cord (not supplied)  
PR  
Audio cord (not supplied)  
To AV2 AUDIO (L/R) IN To Audio OUT  
NOTE:  
• Component Video inputs of the unit are for use with a device which outputs 480i/1080i interlaced signals and  
480p/720p progressive signals.  
13  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections to other equipment  
To connect the LCD TV to a DTV receiver/set-top box  
If you connect a DTV receiver/set-top box, connect your LCD TV to a DTV receiver/set-top box using a compo-  
nent video cord.  
Left Side of the LCD TV  
To COMPONENT IN  
To Component OUT  
Y
P
B
Video cord (not supplied)  
PR  
Audio cord (not supplied)  
To AV2 AUDIO (L/R) IN  
To Audio OUT  
To connect the LCD TV to an HDMI or a DVI device  
The HDMI input receives digital audio and uncompressed video from an HDMI device or uncompressed digital  
video from a DVI device.  
When you connect to a DVI device with an HDMI-to-DVI adapter cable, it transfers only the video signal. Sepa-  
rate analog audio cords are required.  
Left side of the LCD TV  
To HDMI IN  
HDMI cable (type A connector)  
HDMI device  
(not supplied)  
To HDMI out  
or  
To DVI output  
HDMI - to - DVI adapter cable  
(HDMI type A connector)  
DVI device  
(not supplied)  
To PC/HDMI  
AUDIO IN  
Audio cord (not supplied)  
NOTE:  
If you connect an external component (cable box, satellite receiver, etc.) to this LCD TV using a DVI to HDMI  
cable, the image will not display if the output resolution of the component is set to 480i. To receive the picture  
you must change the output resolution on the external component.  
Should you require further instruction, please contact the manufacturer of the external component.  
14  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections to other equipment  
To connect the LCD TV to a Game or a Camcorder  
The LCD TV can also be used as a TV device for many video games or camcorders. However, due to the wide  
variety of signals generated by these devices and subsequent hook-up variations required, they have not all  
been included in the suggested connection diagrams.You'll need to consult each component's Owner's Manual  
for additional information.  
Left side of the LCD TV  
To AV1 VIDEO/AUDIO (L/R) IN  
TV GAME  
or  
To Audio/  
Video OUT  
Audio/Video cord  
(not supplied)  
or  
Audio/Video cord (not supplied)  
To AV2 VIDEO/AUDIO (L/R) IN  
Using an AV Amplifier with built-in digital surround  
If you are using an Amplifier with built-in digital surround sound, you can enjoy various audio systems including  
Dolby Digital Surround audio that sounds just like the movie.  
Connect an AV amplifier with built-in Dolby Digital decoder, or etc. as shown below.  
Left side of the LCD TV  
Front  
Speaker  
(Right)  
COAXIAL DIGITAL  
AUDIO OUT  
Subwoofer  
TV  
Front  
Speaker  
(Left)  
Coaxial digital cable  
(not supplied)  
To Coaxial Digital Audio Input  
Center Speaker  
Surround  
Speaker (Left)  
Surround  
Speaker  
(Right)  
AV Amplifier with built-in digital  
surround decoder as listed above  
NOTE:  
• Coaxial digital audio output is active only when receiving digital broadcasting, not when receiving analog  
broadcasting.  
• Coaxial digital audio output doesn't output the sound of external inputs.  
15  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Connections to other equipment  
To connect the LCD TV to a PC (Personal Computer)  
Before you connect this LCD TV to your PC, change the adjustment of your PC’s Resolution and Refresh rate  
(60 Hz).  
Connect one end of a (male to male) VGA cable to the video card of the computer and the other end to the  
VGA connector PC MONITOR on the back of the LCD TV. Attach the connectors firmly with the screws on the  
plug. In case of a Multimedia computer, connect the audio cord to the audio output of your Multimedia  
computer and to the AUDIO connector of the PC/HDMI AUDIO IN jack of the LCD TV.  
Press INPUT SELECT on the remote control to select PC mode.  
Switch on the computer. The LCD TV can operate as the computer monitor.  
Left side of the LCD TV  
Monitor Display modes  
MODE  
Resolution  
Refresh rate  
VGA  
VGA  
SVGA  
XGA  
WXGA  
WXGA  
640x480  
720x400  
800x600  
1024x768  
1280x768  
1280x720  
60Hz  
70Hz  
60Hz  
60Hz  
60Hz  
60Hz  
To PC IN  
VGA cable (not supplied)  
Audio cord (not supplied)  
PC/HDMI  
AUDIO  
To return to normal mode  
Press INPUT SELECT again.  
IN jack  
NOTE:  
The on-screen displays will have a different appearance in PC mode than in TV mode.  
If there is no video signal from the PC when the unit is in PC mode, “NO SIGNALwill appear on the TV-  
screen.  
16  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the language  
You can choose from three different  
languages (English, French and  
Spanish) for the on-screen displays.  
Select the language you prefer first,  
then proceed with the other menu  
options.  
To turn on the TV, press POWER.  
1
(POWER indicator on the front of the unit blinks while starting.  
It may take approx. 15 seconds for a picture to appear on  
screen.)  
Press MENU. The menu screen will appear.  
2
3
Press or to select  
“Setup” menu, then  
press  
.
Press or to select  
“Menu Language”.  
4
Press or ENTER to select the desired language: English  
(ENGLISH), French (FRANÇAIS) or Spanish (ESPAÑOL).  
5
6
Press MENU to return to the normal screen.  
NOTE:  
• If no buttons are pressed for more  
than about 30 seconds, the MENU  
screen will return to normal opera-  
tion automatically.  
• On this TV, there are setting menus  
for each external input.You can  
change the settings to fit your  
needs.  
(Some settings are commoditized.  
I.e., Audio settings, Parental control,  
NTSC CC, ATSC CC and Digital  
Closed Caption settings are applied  
to all extenal inputs.)  
17  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Memorizing channels  
This TV is equipped with a channel memory feature which allows channels to skip up or down to the  
next channel set into memory, skipping over unwanted channels. Before selecting channels, they must  
be programmed into the TV’s memory.To use this TV with an antenna, set the Tuning Band menu option  
to the Air mode. When shipped from the factory, this menu option is in the Cable mode.  
Air/Cable selection  
Press MENU. The menu screen will appear.  
1
2
Press or to select  
“Setup” menu, then press  
.
Press or to select  
Tuning Band”.  
3
4
5
Press or ENTER to select  
“Air” or “Cable”.  
Air - VHF/UHF channels  
Cable - CABLE TV channels  
Press MENU to return to the normal screen.  
CABLE CHART  
The chart below is typical of many cable system channel allocations.  
NOTE:  
• It may take a few seconds for a  
digital channel picture to appear  
on screen after being selected.  
18  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Memorizing channels  
Automatic channel search  
Press MENU. The menu screen will appear.  
1
2
Press or to select “Setup”  
menu, then press  
.
Press or to select “Auto Ch  
Search”.  
Press  
or ENTER. The TV will  
Autoprogram Menu  
3
Cable Channel 55  
Scanning  
begin memorizing all the  
channels available in your area.  
Analog Channels Found  
Digital Channels Found  
Progress (%)  
12  
0
39  
To Move Enter To Select Menu To Exit  
It may take from 15 minutes  
to 30 minutes to complete memorizing digital cable  
channels.  
Depending on the reception condition, a BAR display may  
not advance for several minutes, please be patient.  
Add on channel search  
This feature searches only blank, unregistered channels.  
Press MENU. The menu screen will appear.  
1
2
Press or to select “Setup”  
menu, then press  
.
Press or to select “Add On  
Ch Search”.  
NOTE:  
• Memorizing channels is best  
accomplished during evening  
“PRIMETIME” hours, as more  
stations are broadcasting digital  
signals. Memorizing channels can  
only be accomplished while a  
station is broadcasting a digital  
signal to set that channel into  
memory.  
Add On Autoprogram Menu  
Press  
or ENTER. The TV will  
3
Cable Channel 44  
Scanning  
begin searching only blank,  
unregistered channels.  
Analog Channels Found  
1
0
Digital Channels Found  
Progress (%)  
16  
To Move Enter To Select Menu To Exit  
It may take from 15 minutes  
to 30 minutes to complete memorizing digital cable  
• No stations can be registered to  
Channel 3 or Channel 4 by using  
“Auto Channel Search” or “Add on  
Search”.  
channels.  
Depending on the reception condition, a BAR display may  
not advance for several minutes, please be patient.  
• If you are unsure of the digital  
channels available in your area, you  
receive a list based on your  
address or zip code. Should you  
require further assistance you may  
call our toll-free customer service  
line at 1-800-289-0980.  
• New digital channels may be added  
to your area periodically, it is  
recommended to perform the “Add  
On Ch Search” procedure regularly.  
19  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Memorizing channels  
Manual Ch Set  
You can select the channel that you want to skip.  
Press MENU. The menu screen will appear.  
1
2
Press or to select “Setup”  
menu, then press  
.
Press or to select “Manual  
Ch Set”, then press or  
ENTER.  
Manual Ch Set menu will  
appear.  
Press or to select the  
channel that you want to skip,  
then press ENTER.  
3
4
Manual Channel Set Menu  
Ch 7-0  
Ch 7-0  
Viewable  
Viewable  
Viewable  
Viewable  
Viewable  
Viewable  
Viewable  
Viewable  
Viewable  
Viewable  
Viewable  
Viewable  
Ch 11-0  
Ch 12-0  
Ch 22-0  
Ch 23-0  
Ch 23-1  
Ch 23-2  
Ch 23-3  
Ch 23-4  
CH-1  
CH-2  
CH-3  
CH-4  
Ch 23-77 CH-77  
Ch 23-999 CH-999  
To Move Enter To Select Menu To Exit  
Press MENU to return to the normal screen.  
20  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV operation  
To turn on the TV, press POWER.  
1
2
(POWER indicator on the front of the unit blinks while starting.  
It may take approx. 15 seconds for a picture to appear on  
screen.)  
Adjust the volume level by  
pressing VOL + or . The volume  
level will be indicated on the  
screen by white bars. As the  
volume level increases, so do the  
Volume  
14  
number of bars. If the volume  
decreases, the number of white  
bars also decreases.  
Air - VHF/UHF channels  
Set the Tuning Band menu  
option to the appropriate  
position (see page 18).  
3
4
Cable - CABLE TV channels  
Press the Direct Channel  
Ch  
9
Selection (0-9, –) buttons to select  
the channel, then press ENTER.  
(If you press only channel number,  
channel selection will be delayed for  
a few seconds.)  
TO SELECT ANALOG CHANNELS  
1-9:  
Press 0 twice, then 1-9 as needed. Example, to  
select channel 2, press 0, 0, 2.  
10-99:  
Press 0, then the remaining 2 digits. Example, to  
select channel 12, press 0, 1, 2.  
100-125: Press the 3 digits in order. Example, to select  
channel 120, press 1, 2, 0.  
TO SELECT DIGITAL CHANNELS  
Press the first 3 digits, then press the button, followed by the  
remaining number.  
Example, to select channel 015-001, press 0, 1, 5, , 1.  
• If a channel is selected with only audio content, “Audio Only ”  
will be displayed on the screen.  
• If a channel is selected with a weak digital signal, “Digital  
Channel Signal Strength is Low” will be displayed on the  
screen.  
If the digital channel has the same analog channel, you way  
be able to watch the same channel with analog.  
• If a channel is selected to which you have not subscribed,  
“Digital Channel is Encrypted” will be displayed on the screen.  
VHF/UHF/CABLE CHANNELS  
Air  
Cable  
NOTE:  
VHF  
2-13  
VHF  
2-13  
• If a channel with no broadcast is  
selected, the sound will automatically  
be muted.  
• It may take a few seconds for a digital  
channel picture to appear on screen  
after being selected.  
UHF  
14-69  
STD/HRC/IRC  
14-36  
(A) (W)  
37-59  
60-85  
86-94  
95-99  
(AA) (WW)  
(AAA) (ZZZ)  
(86) (94)  
(A-5) (A-1)  
100-135 (100) (135)  
01  
(5A)  
21  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV operation  
To select the video input source  
Press INPUT SELECT to view a signal from another device  
connected to your LCD TV, such as a VCR or DVD player.You can  
select ANT, Composite1, Composite2, S-video, Component, HDMI  
or PC depending on which input jacks you used to connect your  
devices.  
CH +/–  
Press and release CH+/–. The channel  
Ch  
9
automatically stops at the next channel  
set into memory.  
For proper operation, before selecting  
channels, they should be set into the  
memory. See pages 18 and 19  
“Memorizing channels”.  
DISPLAY  
Press DISPLAY to display the current information on the screen.  
When the TV receives a digital signal, the  
digital information will appear.  
• Channel number  
Ch 15  
Monscope_480i_1  
720x490  
I
30Hz TV-G  
• Broadcast program name  
• Station name  
Monscope_408i_1_ABCDEFGHLIJKLMNOPQRST....  
ABCDEFGHLIJKLMNOPQRSTUVWXYZabcdefghi....  
• Program guide  
• V-CHIP RATING  
When the TV receives a analog signal,  
the analog information will appear.  
• Channel number or VIDEO mode  
selected  
Ch 12 ABCDEFG  
No Program Information is Available  
720x480  
I
30Hz TV-14VSLD  
• Channel label (if preset)  
Stereo or SAP (second audio program)  
audio status  
Content rating  
Press DISPLAY again to clear the call display.  
RECALL  
This button allows you to go back to the  
last channel selected by pressing  
RECALL. Press RECALL again to return  
to the last channel you were watching.  
Ch  
8
NOTE:  
• The TV is capable of holding a still  
video image or On screen display  
image on your TV screen indefinitely. If  
you leave the still video image or On  
screen display image displayed on  
your TV for an extended period of  
time, you risk permanent damage to  
your TV screen.  
MUTE  
Press MUTE to switch off the sound. The  
TV’s sound will be silenced and “Mute”  
will briefly appear on the screen. The  
sound can be switched back on by  
pressing this button again or the VOL +  
or .  
Mute  
• When the TV receives an analog  
signal, DISPLAY shows only analog  
information.  
• After 4 seconds, DISPLAY screen will  
return to normal TV-operation auto-  
matically.  
22  
Download from Www.Somanuals.com. All Manuals Search And Download.  
TV operation  
SLEEP  
The sleep timer allows you to set a time when the LCD TV auto-  
matically switches to standby.  
Press MENU. The menu screen will appear.  
1
2
Press or to select  
“Feature” menu, then press  
.
Sleep Timer  
Off  
Picture  
Audio  
Setup  
Advanced Video Menu  
Password Set  
Parental Control  
NTSC CC  
Off  
Off  
ATSC CC  
Digital Closed Caption  
Feature  
To Move  
Enter To Select Menu To Exit  
Press or to select  
“Sleep Timer”.  
3
Sleep Timer  
Off  
Picture  
Audio  
Setup  
Advanced Video Menu  
Password Set  
Parental Control  
NTSC CC  
Off  
Off  
ATSC CC  
Digital Closed Caption  
Feature  
To Move  
Enter To Select Menu To Exit  
Press or ENTER  
4
5
Sleep Timer  
240 min  
repeatedly to select the  
desired sleep time (Off, 15  
min, 30 min, 45 min, 60 min,  
90 min, 120 min, 180 min or  
240 min).  
Picture  
Audio  
Setup  
Advanced Video Menu  
Password Set  
Parental Control  
NTSC CC  
Off  
Off  
ATSC CC  
Digital Closed Caption  
Feature  
To Move  
Enter To Select Menu To Exit  
Press MENU to return to the normal screen.  
NOTE:  
You can also set the sleep timer by  
pressing SLEEP on the remote  
control.  
• After the sleep time is programmed,  
the display will appear briefly every 10  
minutes and 5 minutes, 1 minute  
before to remind you that the sleep  
timer is operating.  
To confirm the sleep timer setting,  
press SLEEP and the remaining time  
will be displayed for a few seconds.  
To cancel the sleep timer, press or  
ENTER repeatedly to select “Off” in  
step 4.  
23  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Labeling channels  
Channel labels appear over the  
channel number display each time  
you turn on the TV, select a  
channel, or press DISPLAY.  
You can choose any seven  
To create channel labels  
Press MENU, then press  
1
or to select “Setup”  
menu, then press  
.
characters to identify a channel.  
Press or to select  
“Channel Labels”, then  
press or ENTER.  
The “Channel Labels” menu  
will appear.  
2
Press or to select a  
channel you want to label.  
Channel Labels Menu  
Ch 23-0  
3
4
- - - - - - -  
To Move Enter To Change Menu To Exit  
Channel Labels Menu  
Ch 23-0  
Press or to enter a  
character in the first space.  
Press or repeatedly  
until the character you want  
appears on the screen.  
- - - - - - -  
To Move Enter To Change Menu To Exit  
-
The characters rotation  
as follows:  
?
SPACE  
*
If the character which you desire appears, press  
.
Repeat this step to enter the rest of the characters.  
If you would like a blank space in the label name, you must  
choose the empty space from the list of characters.  
When you finish inputting the label name, press MENU to  
return to the normal screen.  
5
6
Repeat steps 1-5 for other channel.You can assign a label to  
each channel.  
NOTE:  
• The channel labels will be reset after  
“Auto Ch Search”.  
24  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the V-Chip  
An age limitation can be set to restrict children from viewing or hearing violent scenes or pictures that  
you may choose to exclude. The restriction applies to “TV RATING” and “MPAA” if this data is transmit-  
ted. You may set this restriction separately. To use the V-Chip function, you must register a password.  
To register a password  
Press MENU. The menu  
screen will appear.  
Press or to select  
“Feature” menu, then  
1
Sleep Timer  
Off  
Picture  
Audio  
Setup  
Advanced Video Menu  
Password Set  
Parental Control  
NTSC CC  
Off  
Off  
press  
.
ATSC CC  
Digital Closed Caption  
Feature  
To Move  
Enter To Select Menu To Exit  
Press or to select  
“Password Set”, then press  
or ENTER.  
2
3
Sleep Timer  
Off  
Picture  
Audio  
Setup  
Advanced Video Menu  
Password Set  
Parental Control  
NTSC CC  
Off  
Off  
ATSC CC  
Digital Closed Caption  
Feature  
To Move  
Enter To Select Menu To Exit  
Use Number buttons (0-9)  
to enter your password  
(The factory default  
Enter Old Password  
“ ” appears instead of the number.  
password is “0000”).  
Select and enter a password  
(4 digits) using Number  
buttons (0-9).  
Enter New Password  
4
5
Confirm New Password  
Enter the same password  
again to confirm.  
The password is now  
registered.  
NOTE:  
If you forget the password,  
contact Customer Service at 1-  
800-289-0980 for assistance.  
Your original remote control will be  
required.  
To avoid forgetting the password,  
write it down and keep in a safe  
place.  
25  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the V-Chip  
To set the V-Chip  
Press MENU.  
Press or to select “Feature”  
menu, then press  
1
Sleep Timer  
Off  
Picture  
Audio  
Setup  
Advanced Video Menu  
Password Set  
Parental Control  
NTSC CC  
.
Off  
Off  
ATSC CC  
Digital Closed Caption  
Feature  
To Move Enter To Select Menu To Exit  
Enter Password  
Press or to select “Parental  
Control”, then press or ENTER.  
Use Number buttons (0-9) to  
enter your password. The Parental  
Control Menu appears.  
2
3
Parental Control Menu  
US Ratings  
Press or to select “US  
Ratings”, then press or ENTER.  
Advanced Rating  
Off  
To Move Enter To Select Menu To Exit  
Parental Control Menu  
Press // / to select the  
desired rating, then press ENTER.  
4
MPAA  
TV RATING  
ALL FV  
L
S
V
D
NONE  
G
NONE  
TV-Y  
PG  
TV-Y7  
TV-G  
TV RATING  
PG-13  
R
TV-PG  
TV-14  
TV-MA  
NONE : TV RATING is not set  
NC-17  
X
TV-Y  
: All children  
To Move Enter To Select Menu To Exit  
TV-Y7 : 7 years old and above  
TV-G  
: General audience  
TV-PG : Parental guidance  
To use the TV after the TV is  
protected.  
TV-14 : 14 years old and above  
TV-MA : 17 years old and above  
When a program is received that is  
blocked by the V-Chip, press DISPLAY  
or MENU.  
The protection will be temporarily  
overridden. If the TV is turned off, the  
V-Chip restriction will be reactivated.  
ALL (All)  
FV (Fantasy Violence)  
L
S
V
D
(Language)  
(Sex)  
(Violence)  
(Dialogue)  
MPAA (Motion Picture Association of America)  
NOTE:  
The V-Chip function is activated only  
on programs and input sources that  
include a rating signal.  
NONE : MPAA is not set.  
G
: All ages  
PG  
: Parental guidance  
PG-13 : Parental guidance less than 13 years old  
R
: Under 17 years old Parental guidance suggested  
NC-17 : 17 years old and above  
: Adult only  
X
Press MENU to return to the normal screen.  
5
26  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the V-Chip  
To change the password  
Press MENU. The TV menu screen will appear.  
1
2
Press or to select  
“Feature” menu, then  
Sleep Timer  
Off  
Picture  
Advanced Video Menu  
press  
.
Password Set  
Parental Control  
NTSC CC  
Audio  
Setup  
Off  
Off  
ATSC CC  
Digital Closed Caption  
Feature  
To Move  
Enter To Select Menu To Exit  
Press or to select  
“Password Set”, then press  
or ENTER.  
3
Sleep Timer  
Off  
Picture  
Audio  
Setup  
Advanced Video Menu  
Password Set  
Parental Control  
NTSC CC  
Off  
Off  
ATSC CC  
Digital Closed Caption  
Feature  
To Move  
Enter To Select Menu To Exit  
Enter Old Password  
Enter New Password  
Use Number buttons (0-9)  
to enter your password.  
4
5
6
Enter a new password  
using Number buttons  
(0-9).  
Confirm New Password  
Enter the same password  
again to confirm.  
The password is now  
registered.  
27  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the V-Chip  
Downloading the additional V-Chip rating system  
As a supplement to the standard V-Chip rating system, your  
television will be able to download an additional rating system, if  
such a system becomes available in the future.  
To download the additional V-Chip rating system  
(when available)  
Press MENU in the digital channel.  
Press or to select “Feature”  
1
Sleep Timer  
Off  
Picture  
Audio  
Setup  
Advanced Video Menu  
Password Set  
Parental Control  
NTSC CC  
menu, then press  
.
Off  
Off  
ATSC CC  
Digital Closed Caption  
Feature  
To Move Enter To Select Menu To Exit  
Enter Password  
Press or to select “Parental  
Control”, then press or ENTER.  
Use Number buttons (0-9) to  
enter your password. The Parental  
Control Menu appears.  
2
3
Parental Control Menu  
US Ratings  
Press or to select “Advanced  
Rating”, then press to select  
“On”.  
Advanced Rating  
Off  
The “Parental Lock (DTV)” option  
appear.  
To Move Enter To Select Menu To Exit  
Parental Control Menu  
Press or to select “Parental  
Lock (DTV)”, then press or  
ENTER.  
4
US Ratings  
Advanced Rating  
Parental Lock (DTV)  
On  
NOTE:  
You can only download the additional  
V-Chip rating system when your TV is  
receiving a digital signal.  
To Move Enter To Select Menu To Exit  
• When you download the additional  
rating system, it may take some time  
for the download to occur.  
• The V-Chip rating information and  
system are not determined or  
controlled by the TV .  
• The standard V-Chip rating system is  
available whether your TV is receiving  
a digital signal or not, and will block  
both analog and digital programs. To  
set the restriction level using the  
standard V-Chip rating system, select  
US Ratings in step 3.  
If the TV is not storing the additional rating system, the TV will  
begin downloading it, which may take some time to be  
completed.  
5
6
Set your preferred content rating limits for the additional rating  
system.  
• The downloadable V-Chip rating  
system is an evolving technology, and  
availability, content, and format may  
vary.  
You cannot select this feature if the TV  
is not receiving a digital signal for the  
current station.  
28  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Closed Caption  
WHAT IS CLOSED CAPTIONING?  
This television has the capability to decode and display Closed Captioned television programs. Closed Captioning  
will display text on the screen for hearing impaired viewers or it will translate and display text in another language.  
Captions: This Closed Caption Mode will display text on the  
screen in English or another language. Generally, Closed Captions  
in English are transmitted on CC1 and Closed Captions in other  
languages are transmitted on CC2.  
Text: The Text Closed Caption Mode will usually fill 1/2 of the screen  
with a programming schedule or other information.  
Press MENU. Press or to select “Feature” menu, then  
1
press  
.
Press or to select “NTSC CC” or “ATSC CC”.  
2
When you select “NTSC CC”,  
you can choose CC1, CC2,  
CC3, CC4, TEXT1, TEXT2,  
TEXT3, TEXT4 and Off.  
Sleep Timer  
Off  
Picture  
Advanced Video Menu  
Password Set  
Parental Control  
Audio  
NTSC CC  
Off  
Off  
ATSC CC  
Digital Closed Caption  
Setup  
Feature  
To Move  
Enter To Select Menu To Exit  
When you select “ATSC  
CC”, you can choose from  
CS1, CS2, CS3, CS4, CS5,  
CS6 and Off.  
Sleep Timer  
Off  
Picture  
Audio  
Setup  
Advanced Video Menu  
Password Set  
Parental Control  
NTSC CC  
Off  
Off  
ATSC CC  
NOTE:  
Digital Closed Caption  
• Depending on the broad  
cast signal, some Analog  
Captions will function with  
a Digital broadcast signal.  
Feature  
To Move  
Enter To Select Menu To Exit  
To disable the Analog Captions, turn the “NTSC CC” off.  
Press or ENTER to select the desired Closed Caption mode.  
3
NOTE:  
To turn the Closed Caption feature off, select “Off”.  
Press MENU to return to the normal screen.  
4
5
Press CCD to display the Closed Caption on the screen. Select  
the displaying mode from “CC On”, “CC On Mute” or “CC Off”.  
NOTE:  
• If the program or video you selected is not closed-captioned, no captions will display on-screen.  
• If text is not available in your viewing area, a black rectangle may appear on-screen. If this happens, set the  
Closed Caption feature to “OFF”.  
• When selecting Closed Captions, the captioning will be delayed approx. 10 seconds.  
• If no caption signal is received, no captions will appear, but the television will remain in the Caption Mode.  
• Misspellings or unusual characters may occasionally appear during Closed Captioning. This is normal with  
Closed Captioning, especially with live programs. This is because during live programs, captions are also  
entered live. These transmissions do not allow time for editing.  
• When Captions are being displayed, on-screen displays, such as volume and mute may be seen but may  
interfere with Closed Captions.  
• Some cable systems and copy protection systems may interfere with the Closed Captioned signal.  
• If using an indoor antenna or if TV reception is very poor, the Closed Caption Decoder may not appear or may  
appear with strange characters or misspelled words. In this case, adjust the antenna for better reception or use  
an outdoor antenna.  
29  
Download from Www.Somanuals.com. All Manuals Search And Download.  
CC advanced  
When you have selected CUSTOM  
as the display method, you can  
adjust the various setting listed  
below as follows:  
This feature is designed to customize Digital Captions only.  
Press MENU. The menu screen will appear.  
1
2
Press or to select  
“Feature” menu, then press  
Sleep Timer  
Off  
.
Picture  
Audio  
Setup  
Advanced Video Menu  
Password Set  
Parental Control  
NTSC CC  
Off  
Off  
ATSC CC  
Digital Closed Caption  
Feature  
To Move  
Enter To Select Menu To Exit  
Press or to select  
“Digital Closed Caption”,  
then press or ENTER.  
The Digital Closed Caption  
menu will appear.  
3
4
5
Sleep Timer  
Off  
Picture  
Audio  
Setup  
Advanced Video Menu  
Password Set  
Parental Control  
NTSC CC  
Off  
Off  
ATSC CC  
Digital Closed Caption  
Feature  
To Move  
Enter To Select Menu To Exit  
Digital Closed Caption  
Press or to select  
“Style”, then press or  
ENTER to select “Custom”.  
Style  
Automatic  
Automatic  
Automatic  
Automatic  
Automatic  
Automatic  
Automatic  
Automatic  
Automatic  
Size  
Font  
Text Color  
Text Opacity  
Background Color  
Background Opacity  
Edge Effect  
Edge Color  
DECIDED BY BROADCASTING  
To Move Enter To Select Menu To Exit  
Digital Closed Caption  
Press or to select desired  
setting, then press ENTER.  
Style  
Custom  
Normal  
Default  
White  
Solid  
Size  
Font  
Text Color  
Text Opacity  
Background Color  
Background Opacity  
Edge Effect  
Edge Color  
Black  
Solid  
None  
Black  
CLOSED CAPTION SAMPLE  
To Move Enter To Select Menu To Exit  
You can select from among the following items and parameters.  
Size:  
Small, Normal, Large  
Font:  
Default, Font 1, Font 2, Font 3, Font 4, Font 5,  
Font 6, Font 7,  
Text Color:  
Red, Green, Blue, Yellow, Magenta, Cyan,  
Black, White  
Text Opacity: Transparent, Translucent, Solid, Flashing  
Background Color:  
Red, Green, Blue, Yellow, Magenta,  
Cyan, Black, White  
NOTE:  
• Do not set the Closed Caption “Text  
Color” and “Background Color” as  
the same color or you will not be  
able to see the text.  
Do not set both the “Text Opacity”  
and the “Background Opacity” to  
Transparent” or you will not be able  
to see the text.  
Background Opacity  
:
Transparent, Translucent, Solid,  
Flashing  
Edge Effect:  
None, Raised, Depressed, Uniform, Left  
Shadow, Right Shadow  
Edge Color:  
Red, Green, Blue, Yellow, Magenta, Cyan,  
Black, White  
Press MENU to return to the normal screen.  
6
30  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the picture size  
You can view 480i and 480p format  
programs in a variety of picture  
sizes— Normal, Zoom, Wide and  
Cinema.  
Selecting the picture size  
Press MENU. Press or to  
1
2
3
Picture Mode  
Contrast  
Brightness  
Sharpness  
Color  
Vivid  
Picture  
Audio  
Setup  
select “Picture” menu, then  
100  
50  
50  
50  
50  
press  
.
Tint  
Picture Size  
Wide  
Feature  
To Move  
Menu To Exit  
Enter To Select  
Press or to select “Picture  
Size”, then press or ENTER  
to select the desired picture size,  
as described below and on the  
next page.  
Picture Mode  
Contrast  
Brightness  
Sharpness  
Color  
Vivid  
Picture  
Audio  
Setup  
100  
50  
50  
50  
50  
Tint  
Picture Size  
Wide  
Feature  
To Move  
Menu To Exit  
Enter To Select  
Press MENU to return to the normal screen.  
Normal picture size  
In some cases, this image will display the size of standard 4:3 with  
a black side bar.  
Zoom picture size (for letter box programs with  
subtitles)  
To fill the width of the screen, it is extended horizontally. However; it  
is only slightly extended at the top and the bottom.  
The top and bottom edges of the picture may be hidden.  
A B C D E F G - - - - - - - - - - - - - - - -  
A B C D E F G - - - - - - - - - - - - - - - - - - - - - - - - - -  
NOTE:  
• Some High Definition and/or Digital  
broadcasts may not allow you to  
change the picture size.  
31  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the picture size  
NOTE:  
Wide picture size (for 4:3 format programs)  
• In HDMI or COMPONENT mode  
with a scanning rate of 720p or  
1080i, only the Normal and Cinema  
picture size features are available.  
• In PC mode, only the Normal and  
Wide picture size features are  
available.  
To fill the screen, the right and left edges are extended,  
however; the center of the picture remains near its former ratio.  
The top and bottom edges of the picture may be hidden.  
• In Cinema picture size, some of the  
on screen display items may be  
positioned off the visible portion of  
the screen.  
Cinema picture size (for letter box programs)  
The entire picture is uniformly enlarged—it is stretched the same  
amount both wider and taller (retains its original proportion).  
The top and bottom edges of the picture may be hidden.  
A B C D E F G - - - - - - - - - - - - - - - -  
32  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Adjusting the picture preference/Picture control adjustment  
You can select four picture  
modes—Vivid, Standard, Movie  
and User—as described in the  
following table:  
Adjusting the picture preference  
Press MENU. Then press or ▼  
1
Picture Mode  
Contrast  
Brightness  
Sharpness  
Color  
Vivid  
Picture  
Audio  
Setup  
100  
50  
to select “Picture” menu, then  
press  
.
50  
50  
Tint  
50  
Picture Size  
Wide  
Feature  
To Move Enter To Select Menu To Exit  
Press or to select “Picture  
Mode”.  
2
3
Picture Mode  
Vivid  
Picture  
Audio  
Setup  
Contrast  
Brightness  
Sharpness  
Color  
100  
50  
50  
50  
50  
Tint  
Picture Size  
Wide  
Feature  
To Move Enter To Select Menu To Exit  
Press or ENTER to select the  
item you want to adjust.  
Picture Mode  
Standard  
Picture  
Audio  
Setup  
Contrast  
Brightness  
Sharpness  
Color  
80  
50  
50  
50  
50  
Tint  
Picture Size  
Wide  
Feature  
To Move Enter To Select Menu To Exit  
Mode  
Picture Quality  
Vivid  
Bright and dynamic picture (factory-set)  
Standard picture quality (factory-set)  
Movie-like picture setting (factory-set)  
Standard  
Movie  
User  
Your personal preferences (set by you; see “Picture  
control adjustment” below).  
After your desired setting, press MENU to return to the normal  
screen.  
4
Picture control adjustment  
Press MENU. Then press or ▼  
to select “Picture” menu, then  
1
Picture Mode  
Contrast  
Brightness  
Sharpness  
Color  
Vivid  
Picture  
Audio  
Setup  
100  
50  
press  
.
50  
50  
Tint  
50  
Picture Size  
Wide  
Feature  
To Move Enter To Select Menu To Exit  
Press or to select the item you  
want to adjust, then press or  
ENTER.  
2
Picture Mode  
Vivid  
Picture  
Audio  
Setup  
Contrast  
Brightness  
Sharpness  
Color  
100  
50  
50  
50  
50  
Press or to adjust the setting.  
Tint  
Picture Size  
Wide  
Feature  
To Move Enter To Select Menu To Exit  
Press or to change the  
Contrast  
56  
adjusting item.  
Contrast  
Brightness  
Sharpness  
Color  
decrease contrast  
decrease brightness  
makes picture softer  
be pale color  
increase contrast  
increase brightness  
makes picture clearer  
be brilliant color  
NOTE:  
• The CONTRAST default setting is  
set to maximum at the factory.  
Tint  
be greenish color  
be reddish color  
After your desired setting, press MENU to return to the  
3
normal screen.  
33  
Download from Www.Somanuals.com. All Manuals Search And Download.  
DNR/Selecting the color temperature  
DNR  
DNR (Digital Noise Reduction) can reduce the roughness of  
the picture.  
Press MENU. Then press or  
1
2
3
4
Sleep Timer  
Off  
Picture  
Audio  
Setup  
to select “Feature” menu, then  
press  
Advanced Video Menu  
Password Set  
Parental Control  
NTSC CC  
.
Off  
Off  
ATSC CC  
Digital Closed Caption  
Feature  
To Move  
Menu To Exit  
Off  
Enter To Select  
Press or to select  
“Advanced Video Menu”, then  
press or ENTER.  
Sleep Timer  
Picture  
Audio  
Setup  
Advanced Video Menu  
Password Set  
Parental Control  
NTSC CC  
Off  
Off  
ATSC CC  
Digital Closed Caption  
Feature  
To Move Enter To Select Menu To Exit  
Advanced Video Menu  
Press or to select  
“DNR”. Press or ENTER to  
select “On” or “Off”.  
DNR  
On  
Cool  
On  
Color Temperature  
3D Y/C  
To Move Enter To Select Menu To Exit  
Press MENU to return to the normal screen.  
Selecting the color temperature  
Change the picture quality by selecting from three preset color  
temperatures—Cool, Normal, and Warm:  
Press MENU. Then press or  
to select “Feature” menu, then  
1
Sleep Timer  
Off  
Picture  
Audio  
Setup  
Advanced Video Menu  
Password Set  
Parental Control  
NTSC CC  
press  
.
Off  
Off  
ATSC CC  
Digital Closed Caption  
Feature  
To Move  
Menu To Exit  
Off  
Enter To Select  
Press or to select  
“Advanced Video Menu”, then  
press or ENTER.  
2
3
Sleep Timer  
Picture  
Audio  
Setup  
Advanced Video Menu  
Password Set  
Parental Control  
NTSC CC  
Off  
Off  
ATSC CC  
Digital Closed Caption  
Feature  
To Move Enter To Select Menu To Exit  
Advanced Video Menu  
Press or to select  
“Color Temperature”.  
Press or ENTER to select the  
mode you prefer.  
DNR  
On  
Cool  
On  
Color Temperature  
3D Y/C  
Mode  
Picture Quality  
To Move Enter To Select Menu To Exit  
Cool  
Bluish  
Normal  
Warm  
Neutral  
Reddish  
Press MENU to return to the normal screen.  
4
34  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Setting the 3D Y/C  
3DY/C reduces visible interference in your TV picture.This  
is useful when receiving a broadcast with a weak signal  
(especially a Cable channel) or playing a video cassette or disc  
damaged by repeated use.  
Press MENU. Then press or  
to select “Feature” menu, then  
1
Sleep Timer  
Off  
Picture  
Audio  
Setup  
Advanced Video Menu  
Password Set  
Parental Control  
NTSC CC  
press  
.
Off  
Off  
ATSC CC  
Digital Closed Caption  
Feature  
To Move Enter To Select Menu To Exit  
Press or to select  
“Advanced Video Menu”, then  
press or ENTER.  
2
3
Sleep Timer  
Off  
Picture  
Audio  
Setup  
Advanced Video Menu  
Password Set  
Parental Control  
NTSC CC  
Off  
Off  
ATSC CC  
Digital Closed Caption  
Feature  
To Move Enter To Select Menu To Exit  
Advanced Video Menu  
Press or to select “3D Y/C”.  
Press or ENTER to select  
“On” or “Off”.  
DNR  
On  
Cool  
On  
Color Temperature  
3D Y/C  
To Move Enter To Select Menu To Exit  
Press MENU to return to the normal screen.  
4
35  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting Stereo/Second Audio Program (SAP)/  
Sound control adjustment  
The multi-channel TV sound (MTS)  
Selecting Stereo/Second Audio Program (SAP)  
feature provides high-fidelity  
stereo sound. MTS also can  
transmit a second audio program  
(SAP) containing a second  
language or other audio informa-  
tion.  
Press MENU. Then press or  
1
to select “Audio” menu, then  
press  
.
When the TV receives a stereo or  
SAP broadcast, the word “Stereo”  
or “SAP” displays on-screen every  
time you turn the TV on, change  
the channel, or press DISPLAY.  
Press or to select “MTS”,  
then press or ENTER to  
select “Stereo”.  
2
3
Press MENU to return to the normal screen.  
NOTE:  
Generally you can leave your TV in stereo mode because  
the TV automatically outputs the type of sound being  
broadcast (stereo or mono).  
If the stereo sound is noisy, select Mono to reduce the  
noise.  
To listen to a second audio program (SAP)  
Press or ENTER to select “SAP” in step 2 above. The TV speak-  
ers will output the second audio program instead of normal audio.  
Sound control adjustment  
Press MENU. Then press or  
to select “Audio” menu, then  
1
press  
.
Press or to select the item  
you want to adjust, then press  
or ENTER.  
2
Bass:  
Press or to  
adjust the bass  
sound.  
Treble:  
Press or to  
adjust the treble sound.  
Press or to obtain an equal sound level from  
both speakers.  
Balance:  
Press or to change the  
Bass  
31  
adjusting item.  
After your desired setting, press MENU to return to the normal  
screen.  
3
36  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Selecting the audio language/  
Selecting the digital output  
Selecting the audio language  
When two or more audio languages are included in a digital  
signal, you can select one of the audio language.  
Press MENU. Then press or  
to select “Audio” menu, then  
1
press  
.
Press or to select “Audio  
Language”. Then press or  
ENTER to select your desired  
language.  
2
3
Press MENU to return to the normal screen.  
Selecting the digital output  
You can choose the format of the digital audio output signal.  
Press MENU. Then press or  
to select “Audio” menu, then  
1
press  
.
Press or to select “Digital  
Audio Output”, then press or  
ENTER to select “PCM” or  
“RAW”.  
2
3
Press MENU to return to the normal screen.  
37  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Checking the Digital-signal strength/  
Resetting your settings  
Checking the Digital-signal strength  
This TV will allow you to view the digital signal meter for  
digital channels.  
Press MENU. Then press or ▼  
to select “Setup” menu, then  
1
press  
.
Press or to select “DTV  
Signal”.  
2
3
4
Press or ENTER to check the  
Digital-signal strength.  
Weak  
Normal  
Good  
Signal Level  
85  
Press MENU to return to the normal screen.  
Resetting your settings  
The Reset function returns your settings to the factory set-  
tings.  
Press MENU. Then press or ▼  
to select “Setup” menu, then  
1
press  
.
Press or to select “Reset”.  
2
NOTE:  
• Signal meter feature is not  
available for analog channels.  
• After 180 seconds, DTV Signal  
screen will return to normal TV-  
operation automatically.  
You also can reset the settings by  
pressing RESET when “Setup”  
menu is selected.  
Press or ENTER to return your settings to the factory  
settings.  
3
4
Press MENU to return to the normal screen.  
38  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Picture control adjustment in the Component and PC mode  
You can adjust to optimize the  
performance of the TV in the  
Component and PC mode.  
Example: Adjust the H-Pos in the component mode.  
Press INPUT SELECT repeatedly to select the component  
1
mode.  
Press MENU during the  
component mode. Then press  
or to select “Feature”  
2
menu, then press  
.
Press or to select  
“Component Set”, then press  
or ENTER.  
3
4
5
C o m p o n e n t s e t t i n g  
-
7 2 0 x 4 8 0 p @ 6 0 / 5 9 . 9 4 H z  
Press or to select  
“H-Pos”, then press or  
ENTER.  
H-Pos  
48  
48  
V-Pos  
Clock  
50  
50  
Phase  
Auto Adjust  
Setting  
Preset  
To Move Enter To Select Menu To Exit  
Press or to adjust the  
setting.  
Press or to change the  
adjusting item.  
H-Pos  
48  
H-Pos:  
V-Pos:  
Clock:  
Phase:  
To adjust the horizontal position of the  
image on the Component or PC mode.  
To adjust the vertical position of the  
image on the Component or PC mode.  
To minimize any vertical bars or stripes  
visible on the screen background.  
This must be adjusted after the frequency  
of the Component or PC mode has  
been set to 60hz to optimize picture  
quality (page 16).  
Auto Adjust  
(PC Setting only): To optimize “H-Pos”, “V-Pos”, “Clock”  
and “Phase” automatically.  
To return your settings to the factory  
settings.  
NOTE:  
Setting:  
• If no buttons are pressed for more  
than approx. 30 seconds, the Menu-  
screen will return to normal Monitor-  
screen automatically.  
Press MENU to return to the normal screen.  
6
• The “Component Set” and “PC Set”  
settings are not effective for other  
input modes.  
39  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Reception disturbances  
Most types of television interference can be remedied by adjusting the height and position of the VHF/  
UHF antenna. Outdoor antennas are recommended for best results. The most common types of  
television interference are shown below. If one of these symptoms appear when the TV is connected  
to a Cable TV system, the disturbance may be caused by the local Cable TV company broadcast.  
IGNITION  
Black spots or horizontal streaks may appear, the picture may flutter  
or drift. Usually caused by interference from automobile ignition  
systems, neon lamps or AC powered tools and appliances such as  
drills or hair dryers.  
GHOSTS  
Ghosts are caused by the television signal following two paths. One is  
the direct path and the other is reflected by tall buildings, hills or other  
large objects. Changing the direction or position of the antenna may  
improve the reception.  
SNOW  
If the TV is located far from the TV station, in a fringe reception area  
where the signal is weak, small dots may appear in the picture.  
If the signal is extremely weak, the installation of a larger external  
antenna may be necessary.  
RADIO FREQUENCY INTERFERENCE (RFI)  
Caused by two-way radios, this type of interference produces moving  
ripples or diagonal streaks in the picture. Some cases may cause a  
loss of contrast in the picture. Changing the direction and position of  
the antenna or installing an RFI filter may improve the picture.  
PICTURE SIZE VARIATION  
A slight picture size variation is normal when you adjust the CONTRAST  
or BRIGHTNESS settings.  
CARE AND MAINTENANCE  
To prevent fire or shock hazard, disconnect the TV from the power source before cleaning.  
The finish on the cabinet may be cleaned with mild soap and a soft, damp cloth and cared for as other  
furniture. Use caution when cleaning or wiping the plastic parts.  
40  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Troubleshooting  
Use the following checklist for troubleshooting if you have problems with your LCD TV. Consult your local dealer or  
service outlet if problems persist. Be sure all connections are properly made when using with other units.  
SYMPTOMS  
POSSIBLE SOLUTIONS  
SYMPTOMS  
POSSIBLE SOLUTIONS  
• Make sure the power cord is plugged in.  
• Check all CABLE connections.  
TV does not • Try another AC outlet.  
Set Air/Cable menu option to the Cable mode.  
No CATV  
reception.  
operate.  
• Power is off, check fuse or circuit breaker.  
• Unplug unit for an hour, then plug it back in.  
• Station or CABLE system problems, try  
another station.  
• Station or CABLE experiencing problems,  
tune to another station.  
• Check sound adjustments (Volume and Mute).  
• Check for sources of possible interference.  
Horizontal or • Check antenna connections, adjust or  
diagonal bars re-direct antenna.  
Poor sound  
or no sound.  
on screen.  
• Check for sources of possible interference.  
• Make sure Air/Cable menu option is in the  
appropriate mode.  
• If using antenna, check UHF antenna  
connections.  
• Station or CABLE experiencing problems,  
tune to another station.  
• Make sure channels are set into memory.  
• Check antenna or CABLE connections,  
adjust antenna.  
• Check for sources of possible interference.  
• Check picture control adjustments.  
• Station or CABLE experiencing problems,  
tune to another station.  
No reception  
above  
channel 13.  
Poor picture  
or no picture.  
• Batteries are weak, dead or inserted incorrectly.  
• Remote is out of range, move closer to TV  
(within 15 feet).  
No Remote  
operation.  
• Make sure Remote is aimed at sensor.  
• Confirm there are no obstructions between  
the Remote and the TV.  
Poor  
reception on • Make sure channels are set into memory.  
some  
channels.  
• Station is weak, adjust antenna to receive  
desired station.  
• Check for sources of possible interference.  
• Make sure the power cord is plugged in.  
• Sleep Timer is set.  
• Power interrupted.  
TV shuts off.  
• Station or CABLE experiencing problems,  
tune to another station.  
• TV station experiencing problems or program  
tuned is not closed captioned. Try another  
channel.  
• Check CABLE connection or VHF/UHF  
antenna, reposition or rotate antenna.  
• Set closed caption decoder in the menu.  
• Make sure channels are set into memory.  
• Check picture control adjustments.  
• Check antenna or CABLE connections,  
adjust antenna.  
Poor color or  
no color.  
Closed -  
Caption is  
not activated.  
• Check for sources of possible interference.  
• Station or CABLE experiencing problems,  
tune to another station.  
• Make sure channels are set into memory.  
• CABLE company is scrambling signal.  
• Adjust antenna.  
TV is not  
Picture  
wobbles or  
drifts.  
shown in your • Select proper language in the menu options.  
language.  
Digital  
broadcast-  
ing screen  
problem.  
• Check digital signal strength.  
R
FOR CUSTOMER SERVICE, ADDITIONAL SET-UP OR OPERATING ASSISTANCE PLEASE CALL:  
1-800-289-0980  
WHEN CALLING CUSTOMER SERVICE – PLEASE HAVE YOUR MODEL NUMBER READY  
OR WRITE TO:  
ORION SALES, INC.  
3471 N. UNION DR.  
OLNEY, ILLINOIS 62450  
FOR INFORMATION ON OUR OTHER PRODUCTS, PLEASE VISIT OUR WEBSITE AT  
41  
Download from Www.Somanuals.com. All Manuals Search And Download.  
Specifications  
Power supply:  
AC 120 V 60 Hz  
Power consumption:  
Operation: 125 W  
Stand by: 1 W  
Weight:  
26.5 lbs (12.0 kg)  
Dimensions:  
Width: 26-1/8 inches (663 mm)  
Height: 19-1/2 inches (495 mm)  
Depth: 8-5/16 inches (211 mm)  
Inputs:  
VIDEO:  
AUDIO:  
S-VIDEO:  
1 V (p-p)/75 ohms  
–8 dBm/50k ohms  
Y:  
C:  
Y:  
1 V (p-p), 75 ohms  
0.286 V (p-p), 75 ohms  
1 V (p-p), 75 ohms  
COMPONENT:  
PR: 0.7 V (p-p), 75 ohms  
PB: 0.7 V (p-p), 75 ohms  
Digital audio out:  
HDMI input:  
0.5 Vp-p 75 ohms terminated  
HDMI compliant (type A connector)  
HDCP compliant  
E-EDID compliant  
Suggested scan rates: 1080i, 480p, 480i, 720p  
HDMI Audio: 2-channel PCM  
32/44.1/48 kHz sampling frequency  
16/20/24 bits per sample  
PC Monitor input:  
Type:  
Mini-Dsub 15pin x 1  
26.01 inches (660.5 mm diagonal)  
1366 (H) x 768 (V)  
Number of Pixels:  
Viewing angle:  
Left/Right: 80/80 degree  
Up/Down: 80/80 degree  
Antenna input:  
Tuner type:  
VHF/UHF/CABLE In 75 ohm coaxial  
NTSC standard  
ATSC standard (8VSB), QAM  
Receiving channels:  
VHF  
2-13  
14-69  
UHF  
CABLE  
14-36 (A)-(W)  
37-59 (AA)-(WW)  
60-85 (AAA)-(ZZZ)  
86-94 (86)-(94)  
95-99 (A-5)-(A-1)  
100-135 (100)-(135)  
01 (5A)  
Speaker:  
1-5/8 inches (40.6 mm) x 4-13/16 inches (122 mm), 4 ohms x 2  
5.0 W + 5.0 W  
Sound output power:  
ACCESSORIES:  
Remote control  
Batteries (UM-3) x 2  
AC Cord  
Designs and specifications are subject to change without notice.  
42  
Download from Www.Somanuals.com. All Manuals Search And Download.  
R
LIMITED WARRANTY  
26” WIDE LCD TELEVISION  
ORION warrants this product to be free from manufacturing defects in material and workmanship under  
normal use and conditions for a period of 90 days from date of original purchase in the United States.  
Should service be necessary under this warranty for any reason due to a manufacturing defect or  
malfunction during the first 90 days from date of original purchase, ORION will provide carry-in service only by  
an ORION authorized Independent Service Center at no charge. Also, if an original part fails due to  
manufacturing defect in material and workmanship within one year from date of original purchase we will  
replace the defective part, provided the defect or malfunction is verified along with dated proof of purchase.  
There are ORION authorized Independent Service Centers located throughout the country. For the one  
be liable for damages incurred in shipment of the unit. If there are no ORION authorized Independent Service  
Centers in your area please call - 1-888-296-7466 for assistance.  
Note:This warranty is void if the product is:  
(a) Damaged through negligence, misuse, abuse, or accident.  
(b) Used in a commercial application or rentals.  
(c) Modified or repaired by anyone other than an Independent Service Center authorized by ORION to effect  
warranty repairs to the class of product or by the ORION Factory Service Center.  
(d) Damaged because it is improperly connected to the equipment of other manufacturers.  
This warranty does not cover:  
(a) Damage to equipment not properly connected to the product.  
(b) Costs incurred in the shipping of the product to an ORION authorized Independent Service Center or  
ORION Factory Service Center.  
(c) Damage or improper operation of unit caused by customer abuse, misuse, negligence, or failure to follow  
operating instructions provided with the product.  
(d) Ordinary adjustments to the product which can be performed by customer as outlined in the owner’s  
manual.  
(e) Signal reception problems caused by external antenna or cable systems.  
THIS WARRANTY IS NON TRANSFERABLE AND APPLIES ONLY TO THE ORIGINAL PURCHASER  
AND DOES NOT EXTEND TO SUBSEQUENT OWNERS OF THE PRODUCT. ANY APPLICABLE IMPLIED  
WARRANTIES, INCLUDING THE WARRANTY OF MERCHANTABILITY, ARE LIMITED IN DURATION TO A  
PERIOD OF THE EXPRESS WARRANTY AS PROVIDED HEREIN BEGINNING WITH THE DATE OF  
ORIGINAL PURCHASE AT RETAIL AND NO WARRANTIES, WHETHER EXPRESS OR IMPLIED SHALL  
APPLY TO THIS PRODUCT THEREAFTER. ORION MAKES NO WARRANTY AS TO THE FITNESS OF THE  
PRODUCT FOR ANY PARTICULAR PURPOSE AND USE.  
UNDER NO CIRCUMSTANCES SHALL ORION BE LIABLE FOR ANY LOSS, DIRECT, INDIRECT,  
INCIDENTAL, SPECIAL, OR CONSEQUENTIAL DAMAGE ARISING OUT OF OR IN CONNECTION WITH  
THE USE OF THIS PRODUCT.  
THIS WARRANTY IS VALID ONLY IN THE UNITED STATES OF AMERICA. THIS WARRANTY GIVES  
YOU SPECIFIC LEGAL RIGHTS, HOWEVER, YOU MAY HAVE OTHER RIGHTS WHICH MAY VARY FROM  
STATE TO STATE. SOME STATES DO NOT ALLOW LIMITATION ON IMPLIED WARRANTIES OR  
EXCLUSION OF CONSEQUENTIAL DAMAGE, THEREFORE THESE RESTRICTIONS MAY NOT APPLY TO  
YOU.  
ORION SALES, INC.  
3471 N. UNION DR.  
OLNEY, ILLINOIS 62450  
43  
Download from Www.Somanuals.com. All Manuals Search And Download.  
N
Printed in Thailand  
J33S0101A SH 07/08  
Download from Www.Somanuals.com. All Manuals Search And Download.  

PYLE Audio TV Video Accessories PAVS007 User Guide
QSC Audio Car Amplifier PLX 1104 User Guide
RCA Stereo System SLIM DEVICE User Guide
Regency Indoor Fireplace G36D User Guide
Roberts Radio Radio RD 7 User Guide
Rosen Entertainment Systems Games G10 User Guide
Rotel Stereo Equalizer RQ 970 User Guide
Ruby Tech Switch GS 5116C User Guide
Samsung Security Camera SCC B5353 User Guide
Sanyo Flat Panel Television DP32640 User Guide